BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4411

Planet Electro Labs Private Limited, Wazirpur

8185226

IS/IEC 61010 : Part 2 : Sec 020 (2016)

Safety requirements for electrical equipment for measurement, control, and laboratory use: Part 2 - 020 particular requirements for laboratory centrifuges

225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and documentation)	-	15000	-
6(Protection against electric shock)	-	40000	-
7(Protection against mechanical HAZARDS)	-	30000	-
8(Mechanical resistance to shock and impact)	-	15000	-
9(Protection against the spread of fire)	-	30000	-
10(Equipment temperature limits and resistance to heat)	-	20000	-
11(Protection against HAZARDS from fluids)	-	30000	-
14(Components)	-	10000	-
15(Protection by interlocks)	-	10000	-
16(Hazards resulting from application)	-	10000	-
17(Risk assessment)	-	10000	-
5(Marking and documentation)	-	10000	-
6(Protection against electric shock)	-	25000	-
7(Protection against mechanical HAZARDS)	-	45000	-
8(Mechanical resistance to shock and impact)	-	35000	-
9(Protection against the spread of fire)	-	40000	-
10(Equipment temperature limits and resistance to heat)	-	35000	-
11(Protection against HAZARDS from fluids)	-	45000	-
14(Components)	-	40000	-
15(Protection by interlocks)	-	50000	-
16(Hazards resulting from application)	-	45000	-
17(Risk assessment)	-	30000	-

08 May, 2028

-
Included w.e.f 12.11.2025 Exclusion: Cl 12 (Protection against radiation, including laser sources, and against sonic and ultrasonic pressure), 13 (Protection against liberated gases and substances, explosion and implosion), 13.101 (Microbiological materials), 13.2.3 (Implosion of cathode ray tubes)

4412

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-D)	-	6000	Including all dimensions
3-Table 1(Dimensions-P)	-	0	-
3-Table 1(Dimensions-dw(minimum))	-	0	-
3-Table 1(Dimensions-e(minimum))	-	0	-
3-Table 1(Dimensions-m(minimum))	-	0	-
3-Table 1(Dimensions-m(maximum))	-	0	-
3-Table 1(Dimensions-mw(minimum))	-	0	-
3-Table 1(Dimensions-s(minimum))	-	0	-
3-Table 1(Dimensions-s(maximum))	-	0	-
3-Table 2(Dimensions-D)	-	0	-
3-Table 2(Dimensions-P)	-	0	-
3-Table 2(Dimensions-dw(minimum))	-	0	-
3-Table 2(Dimensions-e(minimum))	-	0	-
3-Table 2(Dimensions-m(minimum))	-	0	-
3-Table 2(Dimensions-m(maximum))	-	0	-
3-Table 2(Dimensions-mw(minimum))	-	0	-
3-Table 2(Dimensions-s(minimum))	-	0	-
3-Table 2(Dimensions-s(maximum))	-	0	-
4-Table 3(General requirements)	-	0	-
4-Table 3(Threads-ISO 724 & 965(1))	-	0	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	1000	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	500	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	1000	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	1000	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	1500	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	500	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	500	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	500	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	500	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	1000	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	2000	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	100	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	100	-
3-Table 1(Dimensions-D)	-	0	-
3-Table 1(Dimensions-P)	-	0	-
3-Table 1(Dimensions-dw(minimum))	-	0	-
3-Table 1(Dimensions-e(minimum))	-	0	-
3-Table 1(Dimensions-m(minimum))	-	0	-
3-Table 1(Dimensions-m(maximum))	-	0	-
3-Table 1(Dimensions-mw(minimum))	-	0	-
3-Table 1(Dimensions-s(minimum))	-	0	-
3-Table 1(Dimensions-s(maximum))	-	0	-
3-Table 2(Dimensions-D)	-	0	-
3-Table 2(Dimensions-P)	-	0	-
3-Table 2(Dimensions-dw(minimum))	-	0	-
3-Table 2(Dimensions-e(minimum))	-	0	-
3-Table 2(Dimensions-m(minimum))	-	0	-
3-Table 2(Dimensions-m(maximum))	-	0	-
3-Table 2(Dimensions-mw(minimum))	-	0	-
3-Table 2(Dimensions-s(minimum))	-	0	-
3-Table 2(Dimensions-s(maximum))	-	0	-
4-Table 3(General requirements)	-	0	-
4-Table 3(Threads-ISO 724 & 965(1))	-	0	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	0	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	0	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	0	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	0	-
3-Table 1(Dimensions-D)	-	0	-
3-Table 1(Dimensions-P)	-	0	-
3-Table 1(Dimensions-dw(minimum))	-	0	-
3-Table 1(Dimensions-e(minimum))	-	0	-
3-Table 1(Dimensions-m(minimum))	-	0	-
3-Table 1(Dimensions-m(maximum))	-	0	-
3-Table 1(Dimensions-mw(minimum))	-	0	-
3-Table 1(Dimensions-s(minimum))	-	0	-
3-Table 1(Dimensions-s(maximum))	-	0	-
3-Table 2(Dimensions-D)	-	0	-
3-Table 2(Dimensions-P)	-	0	-
3-Table 2(Dimensions-dw(minimum))	-	0	-
3-Table 2(Dimensions-e(minimum))	-	0	-
3-Table 2(Dimensions-m(minimum))	-	0	-
3-Table 2(Dimensions-m(maximum))	-	0	-
3-Table 2(Dimensions-mw(minimum))	-	0	-
3-Table 2(Dimensions-s(minimum))	-	0	-
3-Table 2(Dimensions-s(maximum))	-	0	-
4-Table 3(General requirements)	-	0	-
4-Table 3(Threads-ISO 724 & 965(1))	-	0	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	0	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRB)	-	0	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1) HRC)	-	0	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1)- Chamfer Circle)	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging Bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1) (Chamfer Circle))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear Bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1) (Impairs Usability))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3) Chamfer Circle)	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	0	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	0	-

08 Feb, 2027

-
Included w.e.f. 31.12.2025

4413

RTRC LIMITED, GURUGRAM

9177406

IS 4412 (1981)

Specification for copper wires for general engineering purposes (First Revision)

Copper wire for general engineering purposes

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( Table -1)(Copper+Silver)	-	900	-
Clause 4.1 ( Table -1)(phosphorus)	-	900	-
Clause 4.1 ( Table -1)(Antimony)	-	900	-
Clause 4.1 ( Table -1)(Arsenic)	-	900	-
Clause 4.1 ( Table -1)(Bismuth)	-	900	-
Clause 4.1 ( Table -1)(Iron)	-	900	-
Clause 4.1 ( Table -1)(Lead)	-	900	-
Clause 4.1 ( Table -1)(Nckel)	-	900	-
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	900	-
Clause 4.1 ( Table -1)(Tellurium)	-	900	-
Clause 4.1 ( Table -1)(Tin)	-	900	-
Clause 4.1 ( Table -1)(Total Impurities)	-	900	-
5.1(Tensile Test)	-	900	-
5.2(Embrittlement Test)	-	900	-
6(Freedom from defect)	-	900	-
7.1(Diameter and Tolerances)	-	900	-
Clause 4(Chemical Composition)	-	900	-

03 Apr, 2027

-
Included w.e.f.10.09.2025

4414

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 6623 (2004)

High Strength Structural Nuts

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 Table-1(Dimensions- d)	-	1000	-
4.1 Table-1(Dimensions- p)	-	1000	-
4.1 Table-1(Dimensions- da)	-	1000	-
4.1 Table-1(Dimensions- dw)	-	1000	-
4.1 Table-1(Dimensions- e)	-	1000	-
4.1 Table-1(Dimensions- m)	-	1000	-
4.1 Table-1(Dimensions- m')	-	1000	-
4.1 Table-1(Dimensions- m'')	-	1000	-
4.1 Table-1(Dimensions- c)	-	1000	-
4.1 Table-1(Dimensions- s)	-	1000	-
4.2(Conformity of threads)	-	1000	-
5.1 Table-2(Rockwell Hardness)	-	1500	-
5.1 Table-2(Proof Load Tcst)	-	2500	-
6.1( heat-treat)	-	500	-
6.2(Finish)	-	500	-
6.2.1(Finish)	-	500	-
7.1(Surface discountinuties test)	-	1000	-
7.2(Workmanship)	-	500	-
4.1 Table-1(Dimensions- d)	-	0	-
4.1 Table-1(Dimensions- p)	-	0	-
4.1 Table-1(Dimensions- da)	-	0	-
4.1 Table-1(Dimensions- dw)	-	0	-
4.1 Table-1(Dimensions- e)	-	0	-
4.1 Table-1(Dimensions- m)	-	0	-
4.1 Table-1(Dimensions- m')	-	0	-
4.1 Table-1(Dimensions- m'')	-	0	-
4.1 Table-1(Dimensions- c)	-	0	-
4.1 Table-1(Dimensions- s)	-	0	-
4.2(Conformity of threads)	-	0	-
5.1 Table-2(Rockwell Hardness)	-	0	-
5.1 Table-2(Proof Load Tcst)	-	0	-
6.1( heat-treat)	-	0	-
6.2(Finish)	-	0	-
6.2.1(Finish)	-	0	-
7.1(Surface discountinuties test)	-	0	-
7.2(Workmanship)	-	0	-
Clause-6.2.1(Anti-Seizing test for hot dip galvanized fasteners)	-	1500	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

4415

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	3000	-
Cl-5, Table-5(General requirements)	-	1000	-
Cl-5, Table-5(Thread-Tolerance class)	-	500	-
Cl-5, Table-5(Mechanical properties-Steel)	-	8500	Including stainless steel
Cl-5, Table-5(Tolerances- Product grade)	-	1000	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	7000	Including Non-electrolytically applied zinc flake and Hot dip galvanized
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	0	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	0	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	1000	-
Cl-6(Marking)	-	500	-
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	0	-
Cl-4(Dimensions)	-	0	-
Cl-5, Table-5(General requirements)	-	0	-
Cl-5, Table-5(Thread-Tolerance class)	-	0	-
Cl-5, Table-5(Mechanical properties-Steel)	-	0	-
Cl-5, Table-5(Tolerances- Product grade)	-	0	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	0	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	0	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	0	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	0	-
Cl-6(Marking)	-	0	-
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	0	-

08 Feb, 2027

-
Included w.e.f. 11.09.2025

4416

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 16391 (2015)

Geosynthetics â€“ Geotextiles used in sub-grade separation in pavement structures â€“ Specification

ALL

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	150000	-
Cl 4.3 Table 1 (iii) (a)(Pullout interaction coefficient, @ 6 mm displacement, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (iii) (b)(Coefficient of direct shear @ Peak geotextile shear strength, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	5000	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	5000	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	5000	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	15000	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	15000	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	15000	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	15000	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	5000	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	15000	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	5000	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	20000	-
6(Marking)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	5000	-
4.1(Geosynthetic materials)	-	0	-
4.2(Carbon black and carbon black dispersion)	-	0	-
4.2(virgin polyester)	-	5000	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	0	-
Cl 4.3 Table 1 (iii) (a)(Pullout interaction coefficient, @ 6 mm displacement, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (iii) (b)(Coefficient of direct shear @ Peak geotextile shear strength, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
6(Marking)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	0	-
4.1(Geosynthetic materials)	-	0	-
4.2(Carbon black and carbon black dispersion)	-	0	-
4.2(virgin polyester)	-	0	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	0	-
Cl 4.3 Table 1 (iii) (a)(Pullout interaction coefficient, @ 6 mm displacement, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (iii) (b)(Coefficient of direct shear @ Peak geotextile shear strength, Normal load = 5 kPa)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
6(Marking)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	0	-
4.1(Geosynthetic materials)	-	0	-
4.2(Carbon black and carbon black dispersion)	-	0	-
4.2(virgin polyester)	-	0	-

08 May, 2028

-
Included w.e.f. 26.09.2025

4417

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	1000	-
Cl-5, Table-7(General requirements)	-	1000	-
Cl-5, Table-7(Thread-Tolerance class)	-	1000	-
Cl-5, Table-7(Mechanical properties- Steel)	-	8500	Including stainless steel
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	0	-
Cl-5, Table-7(Tolerances-Product grade)	-	500	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	6500	Including Non-electrolytically applied zinc flake coatings and Hot dip galvanized coatings
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	0	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	0	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	1000	-
Cl-6(Marking)	-	500	-
Cl-4(Dimensions)	-	0	-
Cl-5, Table-7(General requirements)	-	0	-
Cl-5, Table-7(Thread-Tolerance class)	-	0	-
Cl-5, Table-7(Mechanical properties- Steel)	-	0	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	0	-
Cl-5, Table-7(Tolerances-Product grade)	-	0	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	0	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	0	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	0	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	0	-
Cl-6(Marking)	-	0	-
Cl-4(Dimensions)	-	0	-
Cl-5, Table-7(General requirements)	-	0	-
Cl-5, Table-7(Thread-Tolerance class)	-	0	-
Cl-5, Table-7(Mechanical properties- Steel)	-	0	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	0	-
Cl-5, Table-7(Tolerances-Product grade)	-	0	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	0	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	0	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	0	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	0	-
Cl-6(Marking)	-	0	-

08 Feb, 2027

-
Included w.e.f. 11.09.2025

4418

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

Type: I,II,III,IV

20575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	700.00	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	925.00	-
5.1.6(Ash content - IS 2508: 2024)	-	1200.00	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	700.00	-
5.1.1(Appearance)	-	500.00	-
5.1.2(Film Form)	-	0.00	-
5.1.3(Odour)	-	0.00	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	1100.00	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	500.00	-
5.2.1.2(Nominal Width)	-	500.00	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300.00	Specimen Preparation:250
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300.00	Specimen Preparation:250
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0.00	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0.00	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4200.00	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0.00	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	850.00	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1100.00	Specimen Preparation:250
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1100.00	Specimen Preparation:250
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300.00	Specimen Preparation:250
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1300.00	Specimen Preparation:250
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0.00	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0.00	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4200.00	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0.00	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	850.00	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	2200.00	Specimen Preparation:500
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1100.00	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1300.00	Specimen Preparation:250
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	1300.00	Specimen Preparation:250
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	1300.00	Specimen Preparation:250
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1300.00	Specimen Preparation:250

09 Aug, 2029

-
Included w.e.f.29.09.2025

4419

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1363 : Part 2 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision)

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	-
5- Table 4 -(i)(General requirements)	-	1000	-
5- Table 4 -(ii)(Thread)	-	1000	-
5- Table 4 -(iii)(Mechanical properties)	-	9500	-
5- Table 4 -(iv)(Tolerances)	-	1000	-
5- Table 4 -(v)(Surface condition)	-	6500	-
5- Table 4 -(vi)(Surface integrity)	-	1000	-
5- Table 4 -(vii)(Acceptability)	-	1000	-
6(Marking and labelling)	-	500	-
7(Designation)	-	500	-
4(Finish -Electrolite zinc coating)	-	2500	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

4420

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 16440 (2016)

Stainless steel milk cans - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Carbon)	-	500	-
5.2(Sulphur)	-	500	-
5.2(phosphorus)	-	500	-
5.2(Manganese)	-	500	-
5.2(Silicon)	-	500	-
5.2(Chromium)	-	500	-
5.2(Nickel)	-	500	-
5.2(molybdenum)	-	500	-
3.0(Capacity test)	-	1000	-
6.3(Hardness test)	-	1500	-
6.1(Pressure check for leakage and bulging)	-	1500	-
6.2(Drop test)	-	1500	-
6.4(Dye penetration test)	-	2500	-
"As per Clause 4 & Table 1"(Shape & Dimensions)	-	1500	-
As per Clause 5.4(Thickness of parts)	-	500	-
As per Clause 5.5(Mass of can (Weight))	-	500	-
As per Clause 5.6(Construction)	-	1000	-
Clause 5.6.1(Body)	-	0	-
As per Clause 5.6.2(Handle)	-	0	-
Clause 5.6.3(Bottom ring)	-	0	-
Clause 5.6.4(Lid)	-	0	-
Clause 5.6.6(Finish)	-	0	-
Clause 5.6.7(Heat treatment and Passivation)	-	0	-
Clause 6.5(Leakage test)	-	1000	-
Clause 4 & Table 1"(Shape & Dimensions)	-	1500	-
Clause 5.4(Thickness of parts)	-	0	-
Clause 5.5(Mass of can (Weight))	-	500	-
Clause 5.6(Construction)	-	1000	-
Clause 5.6.1(Body)	-	0	-
Clause 5.6.2(Handle)	-	0	-
Clause 5.6.3(Bottom ring)	-	0	-
Clause 5.6.6(Finish)	-	0	-
Clause 5.6.7(Heat treatment and Passivation)	-	0	-
Clause 6.5(Leakage test)	-	1000	-
5.2(Carbon)	-	0	-
5.2(Sulphur)	-	0	-
5.2(phosphorus)	-	0	-
5.2(Manganese)	-	0	-
5.2(Silicon)	-	0	-
5.2(Chromium)	-	0	-
5.2(Nickel)	-	0	-
5.2(molybdenum)	-	0	-
3.0(Capacity test)	-	0	-
6.3(Hardness test)	-	0	-
6.1(Pressure check for leakage and bulging)	-	0	-
6.2(Drop test)	-	0	-
6.4(Dye penetration test)	-	0	-
"As per Clause 4 & Table 1"(Shape & Dimensions)	-	0	-
As per Clause 5.4(Thickness of parts)	-	0	-
As per Clause 5.5(Mass of can (Weight))	-	0	-
As per Clause 5.6(Construction)	-	0	-
Clause 5.6.1(Body)	-	0	-
As per Clause 5.6.2(Handle)	-	0	-
Clause 5.6.3(Bottom ring)	-	0	-
Clause 5.6.4(Lid)	-	0	-
Clause 5.6.6(Finish)	-	0	-
Clause 5.6.7(Heat treatment and Passivation)	-	0	-
Clause 6.5(Leakage test)	-	0	-
Clause 4 & Table 1"(Shape & Dimensions)	-	0	-
Clause 5.4(Thickness of parts)	-	0	-
Clause 5.5(Mass of can (Weight))	-	0	-
Clause 5.6(Construction)	-	0	-
Clause 5.6.1(Body)	-	0	-
Clause 5.6.2(Handle)	-	0	-
Clause 5.6.3(Bottom ring)	-	0	-
Clause 5.6.6(Finish)	-	0	-
Clause 5.6.7(Heat treatment and Passivation)	-	0	-
Clause 6.5(Leakage test)	-	0	-

-
included w.e.f 26.11.2025

4421

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions and Tolerances)	-	19000	-
4.2.1.1(Dimensions and Tolerances )	-	19000	-
4.1(Dimensions and Tolerances)	-	19000	-
4.1(Dimensions and Tolerances)	-	19000	-
4.1(Dimensions and Tolerances)	-	19000	-
4.2.1(Material)	-	19000	-
4.2.1(Material)	-	19000	-
4.2.2(Handle)	-	19000	-
4.3.1 (Manufacture)	-	19000	-
4.3.2(Manufacture)	-	19000	-
4.3.3(Manufacture)	-	19000	-
4.3.4(Manufacture)	-	19000	-
4.3.5(Handle)	-	19000	-
4.3.5(Handle)	-	19000	-
4.3.5(Handle)	-	19000	-
4.3.5(Handle)	-	19000	-
4.3.5(Handle)	-	19000	-
5.1(Air-Pressure Test)	-	19000	-
5.2(Handle Pull Test)	-	19000	-
5.3(Hydraulic Pressure Test)	-	19000	-
Cl. 4.3.7,(Internal Finish)	-	19000	-
Cl. 4.3.8.(Outside Finish)	-	19000	-
Clause 4.2.3(Solder)	-	19000	-
Clause 4.2.4(Sealing Compound)	-	19000	-
Clause 4.3.6(Supply Condition)	-	19000	-
Clause 4.3.7(Internal Finish)	-	19000	-
Clause 4.3.8(Outside Finish)	-	19000	-
Clause 6(SAMPLING)	-	19000	-
Clause 7(MARKING)	-	19000	-

08 May, 2028

-
Included w.e.f.08.09.2025

4422

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	-
5 - Table 5 (i)(General requirements)	-	500	-
5 - Table 5 (ii)(Thread)	-	1000	-
5 - Table 5 (iii)(Mechanical properties)	-	9500	-
5 - Table 5 (iv)(Tolerances)	-	1000	-
5 - Table 5 (v)(Surface condition)	-	6500	-
5 - Table 5 (vi)(Surface integrity)	-	1000	-
5 - Table 5 (vii)(Acceptability)	-	1000	-
6(Marking and labelling)	-	500	-
7(Designation)	-	500	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

4423

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	100	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	500	-
Cl. 4 (b)(Condition - IS 737)	-	100	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	100	-
Cl. 6(Freedom from Defects - IS 737)	-	1000	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	6500	Cl.7 chemical composition of all elements- Rs 6500/-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Al - IS 504)	-	0	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	8500	Include Cl. 8.1 and 8.2- Rs 8500/-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	0	-
Cl. 8.2(Bend Test - IS 1599)	-	0	-
Cl. 9(Condition - IS 737/ IS 5052)	-	100	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	1500	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	100	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	100	-
Cl. 12(Retests - IS 737/ IS 10259)	-	0	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	500	-

08 Feb, 2027

-
Included w.e.f 13.11.2025

4424

Fire Test & Research Laboratory, Sonipat

8123835

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

Normal Valve and Pressure Regulating Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(FINISH)	-	500	-
Cl-7.1(Water Tightness Test for the Stop Valve)	-	3000	-
Cl-7.2(Hydrostatic Pressure Test)	-	3000	-
Cl-7.3(Flow Test)	-	5000	-
Cl-8(Marking)	-	100	-
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	200	-
Cl-4.3, Table-1(Flanged - Thickness)	-	200	-
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	200	-
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	200	-
Cl-4.3, Table-1(Threaded)	-	200	-
Cl-4.2(shape and dimensions of)	-	300	-
Cl-4.4(Outlet(s) of landing valve)	-	700	-
Cl-4.4(dimensions- outlet adaptor)	-	700	-
Cl-4.4(dimensions- Blank cap for outlet)	-	700	-
Cl-6(FINISH)	-	0	Repeat Test
Cl-7.1(Water Tightness Test for the Stop Valve)	-	0	Repeat Test
Cl-7.2(Hydrostatic Pressure Test)	-	0	Repeat Test
Cl-7.3(Flow Test)	-	0	Repeat Test
Cl-8(Marking)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged - Thickness)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	0	Repeat Test
Cl-4.3, Table-1(Threaded)	-	0	Repeat Test
Cl-4.2(shape and dimensions of)	-	0	Repeat Test
Cl-4.4(Outlet(s) of landing valve)	-	0	Repeat Test
Cl-4.4(dimensions- outlet adaptor)	-	0	Repeat Test
Cl-4.4(dimensions- Blank cap for outlet)	-	0	Repeat Test
Cl-6(FINISH)	-	0	Repeat Test
Cl-7.1(Water Tightness Test for the Stop Valve)	-	0	Repeat Test
Cl-7.2(Hydrostatic Pressure Test)	-	0	Repeat Test
Cl-7.3(Flow Test)	-	0	Repeat Test
Cl-8(Marking)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged - Thickness)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	0	Repeat Test
Cl-4.3, Table-1(Threaded)	-	0	Repeat Test
Cl-4.2(shape and dimensions of)	-	0	Repeat Test
Cl-4.4(Outlet(s) of landing valve)	-	0	Repeat Test
Cl-4.4(dimensions- outlet adaptor)	-	0	Repeat Test
Cl-4.4(dimensions- Blank cap for outlet)	-	0	Repeat Test
Cl-6(FINISH)	-	0	Repeat Test
Cl-7.1(Water Tightness Test for the Stop Valve)	-	0	Repeat Test
Cl-7.2(Hydrostatic Pressure Test)	-	0	Repeat Test
Cl-7.3(Flow Test)	-	0	Repeat Test
Cl-8(Marking)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged - Thickness)	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	0	Repeat Test
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	0	Repeat Test
Cl-4.3, Table-1(Threaded)	-	0	Repeat Test
Cl-4.2(shape and dimensions of)	-	0	Repeat Test
Cl-4.4(Outlet(s) of landing valve)	-	0	Repeat Test
Cl-4.4(dimensions- outlet adaptor)	-	0	Repeat Test
Cl-4.4(dimensions- Blank cap for outlet)	-	0	Repeat Test

31 Dec, 2026

-
Included w.e.f 12.11.2025 Exclusion Cl-5 (MATERIAL OF CONSTRUCTION)

4425

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	1000	-
Cl-6.1, Table-1(Fe)	-	1000	-
Cl-6.1, Table-1(Cu)	-	1000	-
Cl-6.1, Table-1(Mn)	-	1000	-
Cl-6.1, Table-1(Mg)	-	1000	-
Cl-6.1, Table-1(Cr)	-	1000	-
Cl-6.1, Table-1(Ni)	-	1000	-
Cl-6.1, Table-1(Zn)	-	1000	-
Cl-6.1, Table-1(Pb)	-	1000	-
Cl-6.1, Table-1(Sn)	-	1000	-
Cl-6.1, Table-1(Ti)	-	1000	-
Cl-6.1, Table-1(Others elements Each)	-	1000	-
Cl-6.1, Table-1(Others elements Total)	-	1000	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1500	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	1000	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	500	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	1000	-
Cl. 6(Tin)	-	1000	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	1000	-
Cl. 6(Zirconium)	-	1000	-
Cl. 6(Titanium+Zirconium)	-	1000	-
Cl. 6(Antimony)	-	1000	-
Cl. 6(Cobalt)	-	1000	-
Cl. 6(Antimony+Cobalt)	-	1000	-
Cl. 6(Beryllium)	-	1000	-
10(Pressure Test)	-	1000	-

08 Feb, 2027

-
Included w.e.f. 11.09.2025

4426

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3(Short-circuit and overload protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.101(AC input current)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.102(Transformer protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.103(AC input short-circuit current)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.104(Protection of the energy storage device)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.3.105(Unsynchronised load transfer)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4(Protection against electric shock)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.1(Influencing factors)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.2(Pollution degree)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.7.7(PWB spacings for functional insulation)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.4.9(Capacitor discharge)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.5.2(Service access areas)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6(Protection against fire and thermal hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.1(General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.2(Flammability of enclosure materials)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.6.4.1(Temperature limits- Internal parts)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.6.5(Limited power sources)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.7(Protection against mechanical hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 4(Protection against hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.7.101(Protection in service access area)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5(Test requirements)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.2(Mechanical tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.3(Electrical tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.9(Protection against environmental stresses)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.10(Protection against sonic pressure hazards)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.4("Abnormal operation tests")	-	30000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11(Wiring and connections)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.5(Material tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.6(Environmental tests)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 5.2.7(Hydrostatic pressure test)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.11.101.2(Cord anchorages and strain relief)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 6(Information and marking requirements)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.101.1(Emergency switching (disconnect) device)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Clause 6.1.101(Durability)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.101.2(Normal disconnect devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.1(Stored energy source- General)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.2(Accessibility and maintainability)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.3(Distance between battery cells)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.5(Electrolyte spillage)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.8.2(Location of protective devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.102.8.3(Rating of protective devices)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.103(UPS connection to telecommunication lines)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.1.5.3(Operating parameters for tests)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.1.7(Test overview)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.2(Non-accessibility test)	-	9000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.4.4(Drop test)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-4.8.102(Backfeed protection)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 4.102.7(Charging voltages)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.6.102(Rack mounted equipment test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.2.101(Cord guard test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.9(Limited power source test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.10(Temperature rise test)	-	100000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.1(Backfeed protection test- General)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.2(Test for pluggable UPS)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	10000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.102(Input current test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.103(Short-time withstand current test)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	15000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.3.104(Transformer protection test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	5000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	70000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.4(Vibration test)	-	75000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.5(Salt mist test)	-	50000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-5.2.6.6(Dust and sand test)	-	20000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000
Cl-6(Information and marking requirements)	-	1000	Below 10 kW = Rs. 250000 Above 10 kW - 30 kW = Rs. 450000 Above 30 kW = Rs. 800000

23 Jun, 2028

-
Included w.e.f.11.09.2025

4427

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15869 (2020)

Textiles – Open weave coir Bhoovastra – Specification (first revision)

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1, (i)(Mass per unit area, g/m2, Min)	-	1000	-
Clause 5, Table 1, (ii)(Width, cm, Min)	-	1000	-
Clause 5, Table 1, (iii)(Length, m)	-	1000	-
Clause 5, Table 1, (iv)(Thickness at 20 kPa, mm, Min)	-	1000	-
Clause 5, Table 1, (v)(Runnage, m/kg)	-	1000	-
Clause 5, Table 1, (vi)(Break load, dry (kN/m), Min)	-	1000	-
Clause 5, Table 1, (vii)(Break load, wet (kN/m), Min)	-	1000	-
Clause 5, Table 1, (viii)(Peak load, dry (kN/m), Min)	-	1000	-
Clause 5, Table 1, (ix)(Peak load, wet (kN/m), Min)	-	1000	-
Clause 5, Table 1, (x)(Trapezoidal Tearing Strength at 25 mm Gauge Length)	-	1000	-
Clause 5, Table 1, (xi)(Mesh size, mm, Min)	-	1000	-
Clause 6.5, Table 2, (i)(Residual pesticides (sum parameter) (ppm))	-	1000	-
Clause 6.5, Table 2, (ii)(pH of aqueous extract)	-	1000	-
Clause 6.5, Table 2, (iii)(Free and releasable formaldehyde (Max))	-	1000	-
Clause 6.5, Table 2, (iv)(Extractable heavy metals by artificial acidic sweat (ppm) (Max))	-	1000	-
Clause 6.5, Table 2, (v)(Pentachlorophenols (PCP), (ppm))	-	1000	-
Clause 6.5, Table 2, (vi)(Banned aryl amines from azo dyes, (ppm))	-	1000	-
Clause 5, Table 1, (i)(Mass per unit area, g/m2, Min)	-	1000	-
Clause 5, Table 1, (ii)(Width, cm, Min)	-	1000	-
Clause 5, Table 1, (iii)(Length, m)	-	1000	-
Clause 5, Table 1, (iv)(Thickness at 20 kPa, mm, Min)	-	1000	-
Clause 5, Table 1, (v)(Runnage, m/kg)	-	1000	-
Clause 5, Table 1, (vi)(Break load, dry (kN/m), Min)	-	1000	-
Clause 5, Table 1, (vii)(Break load, wet (kN/m), Min)	-	1000	-
Clause 5, Table 1, (viii)(Peak load, dry (kN/m), Min)	-	1000	-
Clause 5, Table 1, (ix)(Peak load, wet (kN/m), Min)	-	1000	-
Clause 5, Table 1, (x)(Trapezoidal Tearing Strength at 25 mm Gauge Length)	-	500	-
Clause 5, Table 1, (xi)(Mesh size, mm, Min)	-	500	-
Clause 6.5, Table 2, (i)(Residual pesticides (sum parameter) (ppm))	-	500	-
Clause 6.5, Table 2, (ii)(pH of aqueous extract)	-	500	-
Clause 6.5, Table 2, (iii)(Free and releasable formaldehyde (Max))	-	500	-
Clause 6.5, Table 2, (iv)(Extractable heavy metals by artificial acidic sweat (ppm) (Max))	-	500	-
Clause 6.5, Table 2, (v)(Pentachlorophenols (PCP), (ppm))	-	500	-
Clause 6.5, Table 2, (vi)(Banned aryl amines from azo dyes, (ppm))	-	500	-

08 May, 2028

-
Included w.e.f 04.09.2025

4428

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE (FDDI), NOIDA

8112814

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

15600 View breakup
-

Clause No.	Exclusion	Remark
Cl-5(Design)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
6(Sizes and Fittines)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
7(Consturction)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.1(Lining Material)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.2, Table-1 (i)(Width, mm, Min)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.4(Use of Rubber material)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.5(Upper material)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.5.1(Tensile Strength of upper)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.5.2(Thickness)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.5.3(Flexing Resistance)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.5.4(Abrasion Resistance)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.6.1(Thickness of Outsole)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.6.2(Tear Strength)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.6.3(Abrasion Resistance of Outsole)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.6.4(Flexing Resistance)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.6.5(Inter layer Bond Strength of outsole)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.7(Insocks material)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.7.1(Thickness of Insocks)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.7.2(Abrasion Resistance of Insock)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.8.1(Outsole/Heel)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.9(Leak Proof Test)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.10(Height of Upper)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.11(Adhesion Test for Rubberized Textile Upper)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.12(Upper Outsole Bond Strength)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.13(Internal Length of Toe Cap)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.14(Impact Resistance of Safety Footwear)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
Cl-8.15(Compression Resistance of Safety Footwear)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.16(Banned Chemicals)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.17(Steel Floor with Glycerine)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
8.18(Corrosion Resistant Test for Toe Caps)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.1(Penetration Resistance)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.2(Antistatic Footwear)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.3(Flame Resistance Property)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.4(Electrical Resistance)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
9.6(Resistance to Fuel Oil)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .
11.2(Marking)	-	For - mechanical - 15600/- For chemical - 23450/- For additional test - separate charges will be applicable for additional test required .

31 May, 2028

-
Included w.e.f. 04.11.2025

4429

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

ALL

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Material And Workmanship)	-	35000	-
Cl 5.1(Cross-Section Dimensions)	-	35000	-
Cl 5.2(Cross-Section Dimensions)	-	35000	-
Cl 6(DESIGNATION)	-	35000	-
Cl 7(Length Measurement And Tolerances)	-	35000	-
Cl 7.2.1(Determination of Pitch Length)	-	35000	-
Cl 7.2.2(Determination of Pitch Length)	-	35000	-
Cl 7.2.3(Determination of Pitch Length)	-	35000	-
Cl 7.3(Matched Belts)	-	35000	-

-
Included w.e.f.28.08.2025

4430

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	3000	-
5(Rating)	-	3000	-
6(Classification)	-	3000	-
7(Marking)	-	3000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	3000	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPERATURE RISE)	-	3000	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	3000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	3000	-
17(OVERLOAD PROTECTION)	-	3000	-
19(ABNORMAL OPERATION)	-	3000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	3000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	3000	-
21(MECHANICAL STRENGTH)	-	3000	-
22(CONSTRUCTION)	-	3000	-
23(INTERNAL WIRING)	-	3000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	3000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	3000	-
27(PROVISION FOR EARTHING)	-	3000	-
28(SCREWS AND CONNECTIONS)	-	3000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	3000	-
31(RESISTANCE TO RUSTING)	-	3000	-
32(RADIATION HAZARDS)	-	3000	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	3000	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	3000	-

20 Jun, 2029

-
Included w.e.f. 29.09.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24 (COMPONENTS) 9 (""STARTING OF MOTOR-OPERATING APPLIANCES "") "

4431

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 17017 : Part 1 (2018)

Electric Vehicle Conductive Charging System Part 1 General Requirements

1200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	50000	-
5(CLASSIFICATION)	-	50000	-
6(CHARGING MODES AND FUNCTIONS)	-	50000	-
7(COMMUNICATIONS)	-	50000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	150000	-
9(CONDUCTIVE ELECTRICAL INTERFACE REQUIREMENTS)	-	300000	-
10(REQUIREMENTS FOR ADAPTORS)	-	25000	-
11(CABLE ASSEMBLY REQUIREMENTS)	-	170000	-
12(EV SUPPLY EQUIPMENT CONSTRUCTIONAL REQUIREMENTS AND TESTS)	-	100000	-
13(OVERLOAD AND SHORT-CIRCUIT PROTECTION)	-	120000	-
14(AUTOMATIC RECLOSING OF PROTECTIVE DVICES)	-	40000	-
15(EMERGENCY SWITCHING OR DISCONNECT ( OPTIONAL))	-	45000	-
16(MARKING AND INSTRUCTIONS)	-	50000	-
4(GENERAL REQUIREMENTS)	-	0	-
5(CLASSIFICATION)	-	0	-
6(CHARGING MODES AND FUNCTIONS)	-	0	-
7(COMMUNICATIONS)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(CONDUCTIVE ELECTRICAL INTERFACE REQUIREMENTS)	-	0	-
10(REQUIREMENTS FOR ADAPTORS)	-	0	-
11(CABLE ASSEMBLY REQUIREMENTS)	-	0	-
12(EV SUPPLY EQUIPMENT CONSTRUCTIONAL REQUIREMENTS AND TESTS)	-	0	-
13(OVERLOAD AND SHORT-CIRCUIT PROTECTION)	-	0	-
14(AUTOMATIC RECLOSING OF PROTECTIVE DVICES)	-	0	-
15(EMERGENCY SWITCHING OR DISCONNECT ( OPTIONAL))	-	0	-
16(MARKING AND INSTRUCTIONS)	-	0	-
4(GENERAL REQUIREMENTS)	-	-	-
5(CLASSIFICATION)	-	-	-
6(CHARGING MODES AND FUNCTIONS)	-	-	-
7(COMMUNICATIONS)	-	-	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	-	-
9(CONDUCTIVE ELECTRICAL INTERFACE REQUIREMENTS)	-	-	-
10(REQUIREMENTS FOR ADAPTORS)	-	-	-
11(CABLE ASSEMBLY REQUIREMENTS)	-	-	-
12(EV SUPPLY EQUIPMENT CONSTRUCTIONAL REQUIREMENTS AND TESTS)	-	-	-
13(OVERLOAD AND SHORT-CIRCUIT PROTECTION)	-	-	-
14(AUTOMATIC RECLOSING OF PROTECTIVE DVICES)	-	-	-
15(EMERGENCY SWITCHING OR DISCONNECT ( OPTIONAL))	-	-	-
16(MARKING AND INSTRUCTIONS)	-	-	-

08 May, 2028

-
Included w.e.f. 22.09.2025

4432

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	3000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	3000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	3000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	3000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	3000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	3000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	3000	-
Cl. 22 302-2-32 : 1994(Construction )	-	3000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	3000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	3000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	3000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	3000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	3000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	3000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	3000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	3000	-
Cl. 7 302-2-32 : 1994(Marking)	-	3000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	3000	-

20 Jun, 2029

-
Included w.e.f. 04.09.2025 Exclusion : "Cl. 32 302-2-32 : 1994 (Radiation Hazards) Cl. 24 (Components) Cl. 18(Endurance) Cl. 8(Starting of motor operated appliances) 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

4433

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

Type A and Type B

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.2(Resistance to Leakage)	-	0	-
Cl 5.3(Strength)	-	0	-
Cl 5.3(Strength)	-	0	-
Cl 5.4(Range & Water Flow Rate)	-	0	-
Cl 5.5(Swinging)	-	0	-
Cl 5.6(Reel Action)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Painting)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.2(Resistance to Leakage)	-	0	-
Cl 5.3(Strength)	-	0	-
Cl 5.3(Strength)	-	0	-
Cl 5.4(Range & Water Flow Rate)	-	0	-
Cl 5.5(Swinging)	-	0	-
Cl 5.6(Reel Action)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Painting)	-	0	-
3.1(Materials)	-	30000	1. Rs. 5500/- for Hub. 2. Rs. 5500/- for Sides. 3. Rs. 5000/- for Wall bracket/Mounting stand. 4. RS. 5000/- for Swivel joint. 5. Rs. 5500/- for Hose-reel tubing. 6. Rs. 5500/- for Nozzle. 7. Rs. 5000/- for Stop Valve. 8. Rs. 5500/- Pipework & Fittings
Cl 7(Painting)	-	1000	-
Cl 6(Workmanship)	-	1000	-
Cl 5.6(Reel Action)	-	3000	-
Cl 5.5(Swinging)	-	3500	-
Cl 5.4(Range & Water Flow Rate)	-	4000	-
Cl 5.3(Strength)	-	0	-
Cl 5.3(Strength)	-	3500	-
Cl 5.2(Resistance to Leakage)	-	5000	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	0	-
Cl 5.1(Dimensions)	-	4000	Rs. 25000/- for complete testing excluding Material Test (Cl. 5).

08 May, 2028

-
Included w.e.f 11.09.2025

4434

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Grade

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	9000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	1000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	1000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	10000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	10000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	10000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	0	-
Cl. 10.4, Fig 2(Concavity, X1)	-	0	-
Cl. 10.4, Fig 2(Convexity, X2)	-	0	-
Cl. 10.5, Fig 3(Squareness of side)	-	0	-
Cl. 10.6, Fig 4(External Corner Radius)	-	0	-
Cl. 10.7, Fig 5(Total twist, V)	-	0	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	10000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	0	-
Cl. 14.1(Exact Length)	-	0	-
Cl. 14.1(Random Length)	-	0	-
Cl. 14.1(Weight on individual length)	-	0	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	0	-
7(Micro Alloying elements(Nb+V+Ti))	-	0	-
7(Carbon equivalent as CE)	-	0	-
10.4(Concavity/Convexity-SOP MT-23)	-	0	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	0	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	0	-
11(Oiling & Painting - IS 4923)	-	0	-
18.1(Height of the internal weld fin - IS 4923)	-	0	-
10.3(Thickness - IS 4923)	-	0	-
13(Marking)	-	0	-
Cl-19(Mechanical Tests)	-	0	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	0	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	0	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	0	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	0	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	0	-
Cl. 10.4, Fig 2(Concavity, X1)	-	0	-
Cl. 10.4, Fig 2(Convexity, X2)	-	0	-
Cl. 10.5, Fig 3(Squareness of side)	-	0	-
Cl. 10.6, Fig 4(External Corner Radius)	-	0	-
Cl. 10.7, Fig 5(Total twist, V)	-	0	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	0	-
Cl. 14.1(Exact Length)	-	0	-
Cl. 14.1(Random Length)	-	0	-
Cl. 14.1(Weight on individual length)	-	0	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	0	-
7(Micro Alloying elements(Nb+V+Ti))	-	0	-
7(Carbon equivalent as CE)	-	0	-
10.4(Concavity/Convexity-SOP MT-23)	-	0	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	0	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	0	-
11(Oiling & Painting - IS 4923)	-	0	-
18.1(Height of the internal weld fin - IS 4923)	-	0	-
10.3(Thickness - IS 4923)	-	0	-
13(Marking)	-	0	-
Cl-19(Mechanical Tests)	-	0	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	0	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	0	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	0	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	0	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	0	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	0	-
Cl. 10.4, Fig 2(Concavity, X1)	-	0	-
Cl. 10.4, Fig 2(Convexity, X2)	-	0	-
Cl. 10.5, Fig 3(Squareness of side)	-	0	-
Cl. 10.6, Fig 4(External Corner Radius)	-	0	-
Cl. 10.7, Fig 5(Total twist, V)	-	0	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	0	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	0	-
Cl. 14.1(Exact Length)	-	0	-
Cl. 14.1(Random Length)	-	0	-
Cl. 14.1(Weight on individual length)	-	0	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	0	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	0	-
7(Micro Alloying elements(Nb+V+Ti))	-	0	-
7(Carbon equivalent as CE)	-	0	-
10.4(Concavity/Convexity-SOP MT-23)	-	0	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	0	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	0	-
11(Oiling & Painting - IS 4923)	-	0	-
18.1(Height of the internal weld fin - IS 4923)	-	0	-
10.3(Thickness - IS 4923)	-	0	-
13(Marking)	-	0	-
Cl-19(Mechanical Tests)	-	0	-

-
Included w.e.f 09.10.2025

4435

Standard Testing and Compliance Private Limited

6178726

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	10000	-
5.2(Capacity)	-	10000	-
5.3(SOC Adjustment)	-	5000	-
6.2.1(Vibration)	-	10000	-
6.2.2(Mechanical Shock)	-	10000	-
6.2.3(Crush)	-	10000	-
6.3.1(High Temperature Endurance)	-	5000	-
6.3.2(Temperature Cycling)	-	20000	-
6.4.1(External Short Circuit)	-	10000	-
6.4.2(Overcharge)	-	10000	-
6.4.3(Forced Discharge)	-	5000	-
6.4.3(Forced Discharge)	-	5000	-
6.4.4(Internal short circuit test)	-	10000	-

10 Jul, 2027

-
Included w.e.f 29.09.2025

4436

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

All Grade

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	5500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	0	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	0	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	0	-
Cl 10(Outer Diameter & Overall Length)	-	0	-
Cl 12(Bituminous Coating & Galvanizing )	-	0	-
Cl 14(Workmanship)	-	0	-
Cl 6(Tensile Test & Flattening Test)	-	0	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	0	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	0	-
Cl 10(Outer Diameter & Overall Length)	-	0	-
Cl 12(Bituminous Coating & Galvanizing )	-	0	-
Cl 14(Workmanship)	-	0	-
5.2(phosphorus)	-	11000	-
5.2(sulphur)	-	11000	-
Cl 14(Workmanship)	-	0	-
Cl 12(Bituminous Coating & Galvanizing )	-	0	-
Cl 10(Outer Diameter & Overall Length)	-	0	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	0	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	0	-
Cl 6(Tensile Test & Flattening Test)	-	0	-
Cl 6(Tensile Test & Flattening Test)	-	0	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	0	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	0	-
Cl 10(Outer Diameter & Overall Length)	-	0	-
Cl 12(Bituminous Coating & Galvanizing)	-	0	-
Cl 14(Workmanship)	-	0	-
11.0(Alignment test IS 4270: 2001)	-	0	-
Cl. 8(Hydrostatic test)	-	0	-

-
Included w.e.f. 04.11.2025 Exclusion: Cl. 8 (Hydrostatic test)

4437

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

All

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	245	-
4.1(Raw Material)	-	245	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	245	-
4.2(Tapes – Linear Density )	-	245	-
4.2(Construction)	-	245	-
4.3(Sacks)	-	245	-
4.3.1(Bottom Seam)	-	245	-
4.3.1(The two rows of stitches shall be separated from each other)	-	245	-
4.3.1( The outer stitch)	-	245	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	245	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	245	-
4.3.1(stitches/dm)	-	245	-
4.3.2(Mouth)	-	245	-
4.4(Liner IS 10146 or IS 10910.)	-	245	-
4.4(Mass of the loose liner )	-	245	-
4.4(Width of the loose liner)	-	245	-
4.4(Length of the line)	-	245	-
4.4(Bottom seam of the loose liner)	-	245	-
4.4.1(Liner)	-	245	-
4.5 and Table 1 i(Capacity)	-	245	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	245	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	245	-
5.2 and Table 1 iii(Ends per dm )	-	245	-
5.2 and Table 1 iv(Picks per dm )	-	245	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	245	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	245	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	245	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	245	-
5.2 and Table 1 x(Ash content )	-	245	-
3(TYPES)	-	245	-
4.1(Raw Material)	-	245	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	245	-
4.2(Tapes – Linear Density )	-	245	-
4.2(Construction)	-	245	-
4.3(Sacks)	-	245	-
4.3.1(Bottom Seam)	-	245	-
4.3.1(The two rows of stitches shall be separated from each other)	-	245	-
4.3.1( The outer stitch)	-	245	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	245	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	245	-
4.3.1(stitches/dm)	-	245	-
4.3.2(Mouth)	-	245	-
4.4(Liner IS 10146 or IS 10910.)	-	245	-
4.4(Mass of the loose liner )	-	245	-
4.4(Width of the loose liner)	-	245	-
4.4(Length of the line)	-	245	-
4.4(Bottom seam of the loose liner)	-	245	-
4.4.1(Liner)	-	245	-
4.5 and Table 1 i(Capacity)	-	245	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	245	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	245	-
5.2 and Table 1 iii(Ends per dm )	-	245	-
5.2 and Table 1 iv(Picks per dm )	-	245	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	245	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	245	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	245	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	245	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	245	-
5.2 and Table 1 x(Ash content )	-	245	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	245	-
5.3(UV Resistance)	-	245	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	245	-

08 May, 2028

-
Included w.e.f 04.09.2025

4438

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 5517 (1993)

Steels for hardening and tempering - Speicification (Second Revision)

All Designation

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
5(Freedom from defects , IS 5517)	-	1000	-
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	1000	-
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	6000	-
10(Grain Size - IS 4748)	-	9000	-
11.1(Inclusion Rating- IS 4163)	-	9000	-
11.2(Blue Fracture Test - IS 10138 (Pt1))	-	9000	-
11.2(Step Down Test- IS 10138(Pt2))	-	0	-
11.2(Magnetic Particle Test -- IS 10138(Pt3))	-	0	4500
12;Table 7(Hardenability Test-IS 3848)	-	14000	-
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	1000	-
16.1 a)(Additional Test; Macro etch Test)	-	0	-
16.1 b)(Additional Test; Ultrasonic Test -IS 3664)	-	0	-
16.1 c); Table 7(Additional Test;Hardenability Test)	-	0	-
16.1 d);Table 5(Additional Test;Blank Hardening Test)	-	0	-
16.1 e)(Additional Test;Cleanliness Test-IS 10138(Pt 1to3))	-	0	-
16.1 f)(Microstructure for machinability,including banding)	-	0	-
16.1 g)(Hot up set for forgability)	-	0	-
Cl 6.2 & Table 2(Carbon- IS 228(Part 1))	-	0	-
Cl 6.2 & Table 3(Sulphur- IS 228(Part 9))	-	0	-
Cl 6.2 & Table 4(Phosphorous- IS 228(Part 3))	-	0	-
Cl 6.2 & Table 5(Manganese- IS 228(Part 2))	-	0	-
Cl 6.2 & Table 6(Silicon- IS 228(Part 2))	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
5(Freedom from defects , IS 5517)	-	0	-
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	0	-
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	0	-
10(Grain Size - IS 4748)	-	0	-
11.1(Inclusion Rating- IS 4163)	-	0	-
11.2(Blue Fracture Test - IS 10138 (Pt1))	-	0	-
11.2(Step Down Test- IS 10138(Pt2))	-	0	-
11.2(Magnetic Particle Test -- IS 10138(Pt3))	-	0	-
12;Table 7(Hardenability Test-IS 3848)	-	0	-
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	0	-
16.1 a)(Additional Test; Macro etch Test)	-	0	-
16.1 b)(Additional Test; Ultrasonic Test -IS 3664)	-	0	-
16.1 c); Table 7(Additional Test;Hardenability Test)	-	0	-
16.1 d);Table 5(Additional Test;Blank Hardening Test)	-	0	-
16.1 e)(Additional Test;Cleanliness Test-IS 10138(Pt 1to3))	-	0	-
16.1 f)(Microstructure for machinability,including banding)	-	0	-
16.1 g)(Hot up set for forgability)	-	0	-
Cl 6.2 & Table 2(Carbon- IS 228(Part 1))	-	0	-
Cl 6.2 & Table 3(Sulphur- IS 228(Part 9))	-	0	-
Cl 6.2 & Table 4(Phosphorous- IS 228(Part 3))	-	0	-
Cl 6.2 & Table 5(Manganese- IS 228(Part 2))	-	0	-
Cl 6.2 & Table 6(Silicon- IS 228(Part 2))	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
5(Freedom from defects , IS 5517)	-	0	-
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	0	-
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	0	-
10(Grain Size - IS 4748)	-	0	-
11.1(Inclusion Rating- IS 4163)	-	0	-
11.2(Blue Fracture Test - IS 10138 (Pt1))	-	0	-
11.2(Step Down Test- IS 10138(Pt2))	-	0	-
11.2(Magnetic Particle Test -- IS 10138(Pt3))	-	0	-
12;Table 7(Hardenability Test-IS 3848)	-	0	-
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	0	-
16.1 a)(Additional Test; Macro etch Test)	-	0	-
16.1 b)(Additional Test; Ultrasonic Test -IS 3664)	-	0	-
16.1 c); Table 7(Additional Test;Hardenability Test)	-	0	-
16.1 d);Table 5(Additional Test;Blank Hardening Test)	-	0	-
16.1 e)(Additional Test;Cleanliness Test-IS 10138(Pt 1to3))	-	0	-
16.1 f)(Microstructure for machinability,including banding)	-	0	-
16.1 g)(Hot up set for forgability)	-	0	-
Cl 6.2 & Table 2(Carbon- IS 228(Part 1))	-	0	-
Cl 6.2 & Table 3(Sulphur- IS 228(Part 9))	-	0	-
Cl 6.2 & Table 4(Phosphorous- IS 228(Part 3))	-	0	-
Cl 6.2 & Table 5(Manganese- IS 228(Part 2))	-	0	-
Cl 6.2 & Table 6(Silicon- IS 228(Part 2))	-	0	-

-
Included w.e.f 22.01.2026 "11.2 (Step Down Test- IS 10138(Pt2)) 16.1 d);Table 5 (Additional Test; Blank Hardening Test) 16.1 g) (Hot up set for forgability)"

4439

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2002 (2024)

Steel Plate for Pressure Vessel for Intermediate and High Temperature Service Including Boilers â Specification (Fourth Revision)

All Grade

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	0	-
Cl-6(Manufacture)	-	0	-
Cl-7.1, Table-1(Carbon)	-	9000	-
Cl-7.1, Table-1(Manganese)	-	9000	-
Cl-7.1, Table-1(Silicon)	-	9000	-
Cl-7.1, Table-1(Sulphur)	-	9000	-
Cl-7.1, Table-1(Phosphorus)	-	9000	-
Cl-8(HEAT TREATMENT)	-	0	-
Cl-9(FREEDOM FROM DEFECTS)	-	1000	-
Cl-9.2.3(Repair by Welding)	-	0	-
Cl-10.2(Rolling Mass)	-	1000	-
Cl-11(CALCULATION OF MASS)	-	500	-
Cl-13(TENSILE TEST)	-	5500	-
Cl-13.2, Table-3(Tensile Strength)	-	5500	-
Cl-13.2, Table-3(Yield Stress)	-	5500	-
Cl-13.2, Table-3(Percent Elongation on Gauge Length)	-	5500	-
Cl-14(BEND TEST)	-	5500	-
Cl-16(ULTRASONIC TESTING)	-	0	If agreed additional charge 5500/-
Cl-18(RE-TEST)	-	0	-
Cl-19(RUST PROTECTIONS)	-	0	-
Cl-20(TOLERANCES ON DIMENSIONS AND SHAPE)	-	0	-
Cl-21(Marking)	-	0	-
Cl-4.1(General requirements)	-	0	-
Cl-6(Manufacture)	-	0	-
Cl-7.1, Table-1(Carbon)	-	0	-
Cl-7.1, Table-1(Manganese)	-	0	-
Cl-7.1, Table-1(Silicon)	-	0	-
Cl-7.1, Table-1(Sulphur)	-	0	-
Cl-7.1, Table-1(Phosphorus)	-	0	-
Cl-8(HEAT TREATMENT)	-	0	-
Cl-9(FREEDOM FROM DEFECTS)	-	0	-
Cl-9.2.3(Repair by Welding)	-	0	-
Cl-10.2(Rolling Mass)	-	0	-
Cl-11(CALCULATION OF MASS)	-	0	-
Cl-13(TENSILE TEST)	-	0	-
Cl-13.2, Table-3(Tensile Strength)	-	0	-
Cl-13.2, Table-3(Yield Stress)	-	0	-
Cl-13.2, Table-3(Percent Elongation on Gauge Length)	-	0	-
Cl-14(BEND TEST)	-	0	-
Cl-16(ULTRASONIC TESTING)	-	0	Same as above
Cl-18(RE-TEST)	-	0	-
Cl-19(RUST PROTECTIONS)	-	0	-
Cl-20(TOLERANCES ON DIMENSIONS AND SHAPE)	-	0	-
Cl-21(Marking)	-	0	-

-
Included w.e.f 08.12.2025

4440

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

All Grade

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	0	-
Cl-6(MANUFACTURE)	-	0	-
Cl-7.1, Table-1(C)	-	9000	-
Cl-7.1, Table-1(Si)	-	9000	-
Cl-7.1, Table-1(Mn Max)	-	9000	-
Cl-7.1, Table-1(P max)	-	9000	-
Cl-7.1, Table-1(S Max)	-	9000	-
Cl-7.1, Table-1(Al Max)	-	9000	-
Cl-7.1, Table-1(N Max)	-	9000	-
Cl-7.1, Table-1(Nb Max)	-	9000	-
Cl-7.1, Table-1(V Max)	-	9000	-
Cl-7.1, Table-1(Ti Max)	-	9000	-
Cl-7.1, Table-1(Nb + V + Ti Max)	-	9000	-
Cl-7.1, Table-1(Cr Max)	-	9000	-
Cl-7.1, Table-1(Cu Max)	-	9000	-
Cl-7.1, Table-1(Mo Max)	-	9000	-
Cl-7.1, Table-1(Ni Max)	-	9000	-
Cl-7.2, Table-2(Carbon)	-	0	-
Cl-7.2, Table-2(Silicon)	-	0	-
Cl-7.2, Table-2(Manganese)	-	0	-
Cl-7.2, Table-2(Phosphorus)	-	0	-
Cl-7.2, Table-2(Sulphur)	-	0	-
Cl-7.2, Table-2(Niobium)	-	0	-
Cl-7.2, Table-2(Vanadium)	-	0	-
Cl-7.2, Table-2(Titanium)	-	0	-
Cl-7.2, Table-2(Chromium)	-	0	-
Cl-7.2, Table-2(Copper)	-	0	-
Cl-7.2, Table-2(Molybdenum)	-	0	-
Cl-7.2, Table-2(Nickel)	-	0	-
Cl-8(HEAT-TREATMENT)	-	0	-
Cl-9(FREEDOM FROM DEFECTS)	-	1000	-
Cl-9.3(Edge Imperfection)	-	1000	-
Cl-10(width ( average of 3))	-	1000	-
Cl-11(THEORETICAL MASS)	-	1000	-
Cl-12.1.1(Number of Tests)	-	0	-
Cl-12.1.2(Orientation of Test Sample)	-	0	-
Cl-12.1.3(Location of Test Sample)	-	0	-
Cl-12.1.6(Tensile Test Result)	-	5500	-
Cl-12.2(Bend Test)	-	1000	-
Cl-12.3.1(Charpy impact test)	-	5500	-
Cl-12.3.2(Number of Tests)	-	0	-
Cl-12.3.3(Orientation)	-	0	-
Cl-12.5(Re-heat Treatment)	-	0	-
Cl-13(ULTRASONIC TESTING)	-	0	-
Cl-14(RUST PROTECTION)	-	0	-
Cl-15(MARKING)	-	0	-
Cl-4.1(General requirements)	-	0	-
Cl-6(MANUFACTURE)	-	0	-
Cl-7.1, Table-1(C)	-	0	-
Cl-7.1, Table-1(Si)	-	0	-
Cl-7.1, Table-1(Mn Max)	-	0	-
Cl-7.1, Table-1(P max)	-	0	-
Cl-7.1, Table-1(S Max)	-	0	-
Cl-7.1, Table-1(Al Max)	-	0	-
Cl-7.1, Table-1(N Max)	-	0	-
Cl-7.1, Table-1(Nb Max)	-	0	-
Cl-7.1, Table-1(V Max)	-	0	-
Cl-7.1, Table-1(Ti Max)	-	0	-
Cl-7.1, Table-1(Nb + V + Ti Max)	-	0	-
Cl-7.1, Table-1(Cr Max)	-	0	-
Cl-7.1, Table-1(Cu Max)	-	0	-
Cl-7.1, Table-1(Mo Max)	-	0	-
Cl-7.1, Table-1(Ni Max)	-	0	-
Cl-7.2, Table-2(Carbon)	-	0	-
Cl-7.2, Table-2(Silicon)	-	0	-
Cl-7.2, Table-2(Manganese)	-	0	-
Cl-7.2, Table-2(Phosphorus)	-	0	-
Cl-7.2, Table-2(Sulphur)	-	0	-
Cl-7.2, Table-2(Niobium)	-	0	-
Cl-7.2, Table-2(Vanadium)	-	0	-
Cl-7.2, Table-2(Titanium)	-	0	-
Cl-7.2, Table-2(Chromium)	-	0	-
Cl-7.2, Table-2(Copper)	-	0	-
Cl-7.2, Table-2(Molybdenum)	-	0	-
Cl-7.2, Table-2(Nickel)	-	0	-
Cl-8(HEAT-TREATMENT)	-	0	-
Cl-9(FREEDOM FROM DEFECTS)	-	0	-
Cl-9.3(Edge Imperfection)	-	0	-
Cl-10(width ( average of 3))	-	0	-
Cl-11(THEORETICAL MASS)	-	0	-
Cl-12.1.1(Number of Tests)	-	0	-
Cl-12.1.2(Orientation of Test Sample)	-	0	-
Cl-12.1.3(Location of Test Sample)	-	0	-
Cl-12.1.6(Tensile Test Result)	-	0	-
Cl-12.2(Bend Test)	-	0	-
Cl-12.3.1(Charpy impact test)	-	0	-
Cl-12.3.2(Number of Tests)	-	0	-
Cl-12.3.3(Orientation)	-	0	-
Cl-12.5(Re-heat Treatment)	-	0	-
Cl-13(ULTRASONIC TESTING)	-	0	-
Cl-14(RUST PROTECTION)	-	0	-
Cl-15(MARKING)	-	0	-
CL 10(Thickness ( average 10 ))	-	0	-

-
Included w.e.f 13.11.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number