BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15210 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4441

National Test House (NER) - NTH, Guwahati

5169204

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	400	-
4.1(Manganese %)	-	300	-
4.1(Phosphorus %)	-	400	-
4.1(Sulphur %)	-	400	-
4.1(Silicon %)	-	300	-
4.1( Copper %)	-	300	-
4.1( Nb)	-	300	-
4.1(V)	-	300	-
4.1(Cr)	-	300	-
4.1(Mo)	-	300	-
4.1(Ni)	-	300	-
4.1( Nitrogen%)	-	300	-
4.1(CE)	-	400	-
4.1(Sulphur and phosphorous)	-	400	-
4.2(Boron (B))	-	300	-
Cl 7.2(Weight)	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	700	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	700	-
Cl. 8.1 Table 3(Elongation, percentage)	-	700	-
8.18.1 Table 3(Total elongation at maximum force)	-	700	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	700	-

13 Dec, 2027

-
-

4442

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 13352 (1992)

Stock for forgings produced from continuously cast blooms, billets and slabs - Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Freedom from defects)	-	11000	-
6.1, table 2 (2)(C)	-	11000	-
6.1, table 2 (3)(Mn)	-	11000	-
6.1, table 2 (4)(Si)	-	11000	-
6.1, table 2 (5)(Ni)	-	11000	-
6.1, table 2 (6)(Cr)	-	11000	-
6.1, table 2 (7)(Mo)	-	11000	-
6.1, table 2 (8)(V)	-	11000	-
6.1, table 2 (9)(Al)	-	11000	-
6.1, table 3 (1)(Carbon Silicon Manganese Nickel Chromium Molybdenum Vanadium Sulphur Phosphorus)	-	11000	-
7(Mechanical properties)	-	11000	-
8(Grain size)	-	11000	-
9.1(Surface defects)	-	11000	-
9.2(Seams)	-	11000	-
10.1(Inclusion rating of the steel)	-	11000	-
10.2(Step down test & magnetic particle test)	-	11000	-
11(Hardenability)	-	11000	-
12(Dimensions and Tolerances)	-	11000	-
14(Retest)	-	22000	-
5(Freedom from defects)	-	0	-
6.1, table 2 (2)(C)	-	0	-
6.1, table 2 (3)(Mn)	-	0	-
6.1, table 2 (4)(Si)	-	0	-
6.1, table 2 (5)(Ni)	-	0	-
6.1, table 2 (6)(Cr)	-	0	-
6.1, table 2 (7)(Mo)	-	0	-
6.1, table 2 (8)(V)	-	0	-
6.1, table 2 (9)(Al)	-	0	-
6.1, table 3 (1)(Carbon Silicon Manganese Nickel Chromium Molybdenum Vanadium Sulphur Phosphorus)	-	0	-
7(Mechanical properties)	-	0	-
8(Grain size)	-	0	-
9.1(Surface defects)	-	0	-
9.2(Seams)	-	0	-
10.1(Inclusion rating of the steel)	-	0	-
10.2(Step down test & magnetic particle test)	-	0	-
11(Hardenability)	-	0	-
12(Dimensions and Tolerances)	-	0	-
14(Retest)	-	0	-

-
Included w.e.f 22.09.2025

4443

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 2 (2024)

Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 2 High frequency surgical equipment and high frequency surgical accessories First revision

580000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	70000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	70000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	70000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	30000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	80000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	70000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	100000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	30000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

4444

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 12 (2023)

Medical Electrical Equipment Part 2 Particular requirements for basic safety and essential performance Section 12 Critical care ventilators (First Revision)

850000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME equipment)	-	50000	-
201.6(Classification of ME equipment and ME systems)	-	50000	-
201.7(ME equipment identification, marking and documents)	-	50000	-
201.8(Protection against electrical hazards from ME equipment)	-	50000	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	50000	-
201.10(Protection against unwanted and excessive radiation hazards)	-	50000	-
201.11(Protection against excessive temperatures and other hazards)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	50000	-
201.13(Hazardous situations and fault conditions for ME equipment)	-	35000	-
201.14(Programmable electrical medical systems (PEMS))	-	30000	-
201.15(Construction of ME equipment)	-	30000	-
201.16(ME systems)	-	30000	-
201.101(Gas connections)	-	30000	-
201.102(Requirements for the VBS and accessories)	-	30000	-
201.103(Spontaneous breathing during loss of power supply)	-	30000	-
201.104(Indication of duration of operation)	-	30000	-
201.105(Functional connection)	-	30000	-
201.106(Display loops)	-	30000	-
201.107(Timed ventilatory pause)	-	30000	-
206(Usability)	-	35000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

4445

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	1000	-
Cl-6.1, Table-1(Fe)	-	1000	-
Cl-6.1, Table-1(Cu)	-	1000	-
Cl-6.1, Table-1(Mn)	-	1000	-
Cl-6.1, Table-1(Mg)	-	1000	-
Cl-6.1, Table-1(Cr)	-	1000	-
Cl-6.1, Table-1(Ni)	-	1000	-
Cl-6.1, Table-1(Zn)	-	1000	-
Cl-6.1, Table-1(Pb)	-	1000	-
Cl-6.1, Table-1(Sn)	-	1000	-
Cl-6.1, Table-1(Ti)	-	1000	-
Cl-6.1, Table-1(Others elements Each)	-	1000	-
Cl-6.1, Table-1(Others elements Total)	-	5000	-
Cl-6.1, Table-1(Aluminium)	-	1000	-
Cl-6.2(The chemical analysis)	-	5000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	-
Cl-7.2(Tensile Tests)	-	1000	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	1000	-
Cl-8(Freedom from Defects)	-	1000	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	100	-
Cl. 6(Silicon)	-	1000	-
Cl. 6(Iron)	-	1000	-
Cl. 6(Copper)	-	1000	-
Cl. 6(Manganese)	-	1000	-
Cl. 6(Magnesium)	-	1000	-
Cl. 6(Chromium)	-	1000	-
Cl. 6(Nickel)	-	1000	-
Cl. 6(Zinc)	-	1000	-
Cl. 6(Lead)	-	1000	-
Cl. 6(Tin)	-	1000	-
Cl. 6(Titanium)	-	1000	-
Cl. 6(Others Element Each)	-	1000	-
Cl. 6(Others Element Total)	-	5000	-
Cl. 6(Aluminium)	-	1000	-
Cl. 6(Silver)	-	1000	-
Cl. 6(Zirconium)	-	1000	-
Cl. 6(Titanium+Zirconium)	-	1000	-
Cl. 6(Antimony)	-	1000	-
Cl. 6(Cobalt)	-	1000	-
Cl. 6(Antimony+Cobalt)	-	1000	-
Cl. 6(Beryllium)	-	1000	-
10(Pressure Test)	-	1500	-

08 May, 2028

-
Included w.e.f 23.07.2025

4446

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 17017 : Part 1 (2018)

Electric Vehicle Conductive Charging System Part 1 General Requirements

790000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	25000	-
5(CLASSIFICATION)	-	25000	-
6(CHARGING MODES AND FUNCTIONS)	-	25000	-
7(COMMUNICATIONS)	-	25000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	100000	-
9(CONDUCTIVE ELECTRICAL INTERFACE REQUIREMENTS)	-	200000	-
10(REQUIREMENTS FOR ADAPTORS)	-	10000	-
11(CABLE ASSEMBLY REQUIREMENTS)	-	150000	-
12(EV SUPPLY EQUIPMENT CONSTRUCTIONAL REQUIREMENTS AND TESTS)	-	100000	-
13(OVERLOAD AND SHORT-CIRCUIT PROTECTION)	-	100000	-
14(AUTOMATIC RECLOSING OF PROTECTIVE DVICES)	-	10000	-
15(EMERGENCY SWITCHING OR DISCONNECT ( OPTIONAL))	-	10000	-
16(MARKING AND INSTRUCTIONS)	-	10000	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

4447

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS/IEC 80601 : Part 2 : Sec 49 (2018)

Medical electrical equipment Part 2- Particular requirements for basic safety and essential performance- Sec 49 Multifunction patient monitors

1340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.5(General requirements for testing of ME EQUIPMENT)	-	25000	-
201.6(Classification Of ME equipment and ME systems)	-	25000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	20000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	35000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	35000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	35000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	30000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	35000	-
201.15(Construction of ME EQUIPMENT)	-	30000	-
201.16(ME SYSTEMS)	-	25000	-
201.17(Electromagnetic compatibility of ME equipment and ME systems)	-	450000	-
202(Electromagnetic disturbances-Requirements and tests)	-	495000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	10000	-
201.4(General requirements)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.17(Electromagnetic compatibility of ME equipment and ME systems)	-	0	-
202(Electromagnetic disturbances-Requirements and tests)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-
201.4(General requirements)	-	0	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

4448

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grade)	-	100	-
3(Type/Shape of Cover)	-	100	-
4.4(Reinforcement)	-	500	-
4.4(Reinforcement)	-	500	-
4.5(Steel Fibres - Diameter / equivalent diameterofsteel tibres)	-	500	-
4.5(Steel Fibres - The aspect ratio of the tibres)	-	500	-
5.2 and Table 1(Dimensions of Frame - A)	-	1000	-
5.2 and Table 1(Dimensions of Frame - B)	-	1000	-
5.2 and Table 1(Dimensions of Frame - C)	-	1000	-
5.2 and Table 1(Dimensions of Frame - D)	-	1000	-
5.2 and Table 1(Dimensions of Frame - E)	-	1000	-
5.2 and Table 1(Dimensions of Frame - F)	-	1000	-
5.2(Dimensions of cover- Diameter)	-	1000	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	100	-
5.2(Top surface ofthe frame and cover is in level)	-	100	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	100	-
5.2 and Fig 1(Clear cover to reinforcement)	-	100	-
5.2 and Fig 1(Distance of housing from the edge)	-	100	-
7.4.1(Edge Protection and Finishing - Frame)	-	500	-
7.4.1(Edge Protection and Finishing - Frame)	-	500	-
7.4.1(Edge Protection and Finishing - Frame)	-	500	-
7.4.1(Edge Protection and Finishing - Frame)	-	500	-
7.4.2(Edge Protection and Finishing - Cover)	-	500	-
7.4.2(Edge Protection and Finishing - Cover)	-	500	-
7.4.2(Edge Protection and Finishing - Cover)	-	500	-
7.4.2(Edge Protection and Finishing - Cover)	-	500	-
8(LIFTING HOOKS)	-	500	-
8(LIFTING HOOKS)	-	500	-
9.1(General)	-	500	-
9.3 and Table and Annex C(Load Test)	-	3000	-
Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover)	-	1000	-
Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel)	-	1000	-
Clause No. 9.3 Annex C(Cracks at bottom side of the cover )	-	1000	-
Clause No. 9.3 Annex C(Permanent set of cover)	-	1000	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load)	-	3000	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load)	-	3000	-
Clause No. 8(Lifting Device)	-	500	-
Clause No. 8(Lifting Hooks (Diameter of MS rod))	-	500	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	100	-
Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet))	-	100	-
Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface))	-	100	-
Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors))	-	100	-
Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat))	-	100	-
Clause No. 6(Design)	-	100	-

08 May, 2028

-
Included w.e.f. 04.08.2025

4449

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 13450 : Part 2 : Sec 20 (2023)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 20 Infant Transport Incubators First Revision

1310000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	30000	-
201.5(General requirements for testing ME EQUIPMENT)	-	30000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	15000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	15000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	45000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	20000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	25000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	30000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	30000	-
201.15(Construction of ME EQUIPMENT)	-	20000	-
201.16(ME SYSTEMS)	-	20000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	450000	-
202(Electromagnetic disturbances – Requirements and tests)	-	495000	-
212(* Requirements for MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS intended for use in the EMERGENCY MEDICAL SERVICES ENVIRONMENT)	-	25000	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

4450

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 13664 (1993)

Poly - Pallets for bag storage godowns - Specification

All

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.5(End Plugs)	-	0	-
5.1 (Table-1)(Nominal Assembly Dimensions)	-	500	-
5.3(Dimensions and Cross Sectional Details of Members)	-	1000	-
7(Material Identification)	-	2000	-
8.1(Type)	-	500	-
8.2(Stability)	-	0	-
8.3(Assembly)	-	0	-
8.4(Fastening)	-	0	-
8.6(Weight)	-	500	-
9.1.1 Table-2(Axial Crushing load)	-	1600	1100+500 (Test Charges + Specimen)
9.1.1 Table-2(Cross Sectional crushing load)	-	1100	-
9.1.1 Table-2(Ultimate bending load)	-	1600	1100+500 (Test Charges + Specimen)
9.1.2 Table-3(Shear Strength)	-	1600	1100+500 (Test Charges + Specimen)
9.1.2 Table-3(Ultimate tensile strength & Elongation)	-	1800	1300+500 (Test Charges + Specimen)
9.1.2 Table-3(Impact Strength)	-	1600	1100+500 (Test Charges + Specimen)
9.1.2 Table-3(Thermal Stability)	-	1300	700+600 (Test Charges + Specimen)
9.1.2 Table-3(Water absorpation)	-	1100	600+500 (Test Charges + Specimen)
9.1.2 Table-3(Chemical Resistance)	-	1600	1100+500 (Test Charges + Specimen)
9.1.2 Table-3(Bent Strength at yield)	-	1600	1100+500 (Test Charges + Specimen)
9.1.2 Table-3(Compressive strength at 10% deformation)	-	1600	1100+500 (Test Charges + Specimen)
9.1.3.1(Stacking Test)	-	1100	-
9.1.3.1(Bending Test)	-	1100	-
9.1.3.1(Corner Drop Test)	-	1100	-

14 Dec, 2027

-
Included w.e.f 28.07.2025

4451

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 , Table 1(CLASSIFICATION)	-	100	-
5.1(Colour and Pattern)	-	1000	-
5.2(Surface Finish)	-	100	-
5.2.2(Reverse side/Bonding)	-	100	-
5.3 ,Table 5(Thickness)	-	100	-
5.4(Appearance )	-	500	-
5.2.2(Sports, dirt and similar surface defects)	-	500	-
5.2.2(Fibres,hairs,scratches)	-	200	-
5.2.2(Accumulated(Combination)of surface defects)	-	200	-
5.2.2(Edge Defects)	-	200	-
5.2.2(Broken Corners )	-	200	-
5.4.4(Sanding Defects)	-	200	-
5.4.5 table 6(W arping (Flatness ))	-	100	-
5.4.6 (Length and width of a full size Laminate)	-	100	-
5.4.7,Fig. 2(Staightness of Edges)	-	100	-
5.4.8, Fig.3(Squareness of the Laminates)	-	100	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	500	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	500	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	500	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	500	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	500	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	500	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	200	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	500	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	300	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	500	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	300	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	300	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	300	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	500	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	300	-
5.5, Tables 7, Sr No.(xi) Annex -Q (alternative)(Resistance to Cigarette burns)	-	300	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	500	-
5.5, Tables 7, Sr No.(xiv) Annex -R (Formability Method B)	-	300	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	300	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method B)	-	500	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	300	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	500	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	500	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	300	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	500	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	300	-
7.2 a)(Marking)	-	100	-
7.2 b)(Marking)	-	100	-
7.2 c)(Marking)	-	100	-
7.2 d)(Marking)	-	100	-
7.2.1(Marking)	-	100	-
5 & 5.1(Colour & Pattern)	-	100	-
5.2(Surface & Finish)	-	100	-
5.2.2(Reverse side Bonding)	-	100	-
5.3(Nominal thickness)	-	100	-
5.4.1.1(Surface defects)	-	100	-
5.4.1.2(Fiber hair scratches)	-	100	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	100	-
5.4.2(Edge defect)	-	100	-
5.4.3(Broken corner)	-	100	-
5.4.4(Sanding defect)	-	100	-
5.4.5(Warping(Flatness))	-	100	-
5.4.6(Length)	-	100	-
5.4.6(Width)	-	100	-
5.4.7(Straightness of edge)	-	100	-
5.4.8(Squreness of laminate)	-	100	-
5.5Table-7(1(Surfacewear)	-	100	-
Table-7(2(Immesion in boiling water)	-	100	-
Table-7(3(Dry heat resistance)	-	600	-
Table-7(4(Dimensional stability)	-	200	-
Table-7(6(Impact by small dia.Ball)	-	700	-
Table-7(7(Impact by large dia.Ball)	-	700	-
Table-7(8(Cracking resistance)	-	500	-
Table-7(9(Scracting resistance)	-	300	-
Table-7(10(Staining resistance)	-	300	-
Table-7(10(Colour change(Xenon arc resis))	-	600	-
Table-7(11(Cigarette burn resistance)	-	200	-
Table-7(12(Formability)	-	300	-
Table-7(13(Blistering)	-	500	-
Table-7(14(Steam resistance)	-	300	-
Table-7(15(Crazing reistance)	-	300	-
Table-7(16(Moisture reistance)	-	500	-
Table-8(17(Flexural Modulus)	-	500	-
Table-8(18(Flexural strength)	-	300	-
Table-8(19(Tensile strength)	-	100	-
5.4.6 (Length and width of a full size Laminate)	-	100	-
4 , Table 1(CLASSIFICATION)	-	0	-
5.1(Colour and Pattern)	-	0	-
5.2(Surface Finish)	-	0	-
5.2.2(Reverse side/Bonding)	-	0	-
5.3 ,Table 5(Thickness)	-	0	-
5.4(Appearance )	-	0	-
5.2.2(Sports, dirt and similar surface defects)	-	0	-
5.2.2(Fibres,hairs,scratches)	-	0	-
5.2.2(Accumulated(Combination)of surface defects)	-	0	-
5.2.2(Edge Defects)	-	0	-
5.2.2(Broken Corners )	-	0	-
5.4.4(Sanding Defects)	-	0	-
5.4.5 table 6(W arping (Flatness ))	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-
5.4.7,Fig. 2(Staightness of Edges)	-	0	-
5.4.8, Fig.3(Squareness of the Laminates)	-	0	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	0	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	0	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	0	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	0	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	0	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	0	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	0	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -Q (alternative)(Resistance to Cigarette burns)	-	0	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -R (Formability Method B)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	0	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method B)	-	0	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	0	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	0	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	0	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	0	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	0	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	0	-
7.2 a)(Marking)	-	0	-
7.2 b)(Marking)	-	0	-
7.2 c)(Marking)	-	0	-
7.2 d)(Marking)	-	0	-
7.2.1(Marking)	-	0	-
5 & 5.1(Colour & Pattern)	-	0	-
5.2(Surface & Finish)	-	0	-
5.2.2(Reverse side Bonding)	-	0	-
5.3(Nominal thickness)	-	0	-
5.4.1.1(Surface defects)	-	0	-
5.4.1.2(Fiber hair scratches)	-	0	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	0	-
5.4.2(Edge defect)	-	0	-
5.4.3(Broken corner)	-	0	-
5.4.4(Sanding defect)	-	0	-
5.4.5(Warping(Flatness))	-	0	-
5.4.6(Length)	-	0	-
5.4.6(Width)	-	0	-
5.4.7(Straightness of edge)	-	0	-
5.4.8(Squreness of laminate)	-	0	-
5.5Table-7(1(Surfacewear)	-	0	-
Table-7(2(Immesion in boiling water)	-	0	-
Table-7(3(Dry heat resistance)	-	0	-
Table-7(4(Dimensional stability)	-	0	-
Table-7(6(Impact by small dia.Ball)	-	0	-
Table-7(7(Impact by large dia.Ball)	-	0	-
Table-7(8(Cracking resistance)	-	0	-
Table-7(9(Scracting resistance)	-	0	-
Table-7(10(Staining resistance)	-	0	-
Table-7(10(Colour change(Xenon arc resis))	-	0	-
Table-7(11(Cigarette burn resistance)	-	0	-
Table-7(12(Formability)	-	0	-
Table-7(13(Blistering)	-	0	-
Table-7(14(Steam resistance)	-	0	-
Table-7(15(Crazing reistance)	-	0	-
Table-7(16(Moisture reistance)	-	0	-
Table-8(17(Flexural Modulus)	-	0	-
Table-8(18(Flexural strength)	-	0	-
Table-8(19(Tensile strength)	-	0	-
5.4.6 (Length and width of a full size Laminate)	-	0	-

15 Aug, 2028

-
Included w.e.f 28.07.2025

4452

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 13450 : Part 2 : Sec 40 (2020)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 40 Electromyographs and evoked response equipment

1360000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	35000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	25000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	25000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	45000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	45000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	45000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	35000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	35000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	35000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	45000	-
201.15(Construction of ME EQUIPMENT)	-	35000	-
201.16(ME SYSTEMS)	-	25000	-
201.17(ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS)	-	450000	-
202(ELECTROMAGNETIC DISTURBANCES – Requirements and tests)	-	450000	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

4453

BIS, Eastern Regional Laboratory (ERL)

None

IS 2041 (2024)

Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature â Specification (Fourth Revision)

All grades and sizes except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (FREEDOM FROM DEFECTS)	-
Cl-9.3 (Edge Imperfection)	-
Cl-10 (width ( average of 3))	-
Cl-11 (THEORETICAL MASS)	-
Cl-12.1.6 (Tensile Test Result)	-
Cl-12.2 (Bend Test)	-
Cl-12.3.1 (Charpy impact test)	-
Cl-7.1, Table-1 (C)	-
Cl-7.1, Table-1 (S Max)	-
Cl-7.1, Table-1 (P max)	-
Cl-7.1, Table-1 (Mn Max)	-
Cl-7.1, Table-1 (Si)	-
Cl-7.1, Table-1 (N Max)	-
Cl-7.1, Table-1 (Ni Max)	-
Cl-7.1, Table-1 (Cr Max)	-
Cl-7.1, Table-1 (Cu Max)	-
Cl-7.1, Table-1 (Mo Max)	-
Cl-10 (width ( average of 3))	-
CL 10 (Thickness ( average 10 ))	-

-
Mech: Except Tensile strength at High Temp(For Grade H only), Impact at -40(Cl 12.3), Ultrasonic test(Cl 13, optional)

4454

Sleen India Biz venture Private Limited, Agra

9139736

IS 12069 (2023)

Coconut Fatty Acids - Specification (first revision of IS 12069)

Grade-1 and Grade-2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	-
4.2(Description)	-	250	-
4.3 Table 1 (i)(Moisture)	-	500	-
4.3 Table 1 (ii)(Saponification value)	-	1000	-
4.3 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	-
4.3 Table 1 (iv)(Iodine value)	-	1500	-
4.3 Table 1 (v)(Mineral acidity)	-	1000	-
4.3 Table 1 (vi)(Ash,)	-	500	-
4.3 Table 1 (vii)(Unsaponifiable matter)	-	1000	-
4.3 Table 1 (viii)(Titre,)	-	1500	-
4.3 Table 1 (ix)(Flash point)	-	1000	-
4.4 Table 2 (i)(C6 : 0)	-	5000	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (ii)(C8 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iii)(C10 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4 Table 2 (iv)(C12 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (v)(C14 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vi)(C16 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (vii)(C16 :1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (viii)(C17 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (ix)(C17 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (x)(C18 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xi)(C18 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xii)(C18 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiii)(C18 : 3)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xiv)(C20 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xv)(C20 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvi)(C20 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xvii)(C22 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xviii)(C22 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xix)(C22 : 2)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xx)(C24 : 0)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.4Table 2 (xxi)(C24 : 1)	-	0	Complete test price for Fatty Acid Cl. 4.4, Table 2 is 5000/-.
4.3 Table 1 (ix)(Colour,)	-	500	-

-
Included w.e.f.23.07.2025

4455

CIPET, Lucknow

9102534

IS 14611 (2024)

Multilayered Cross Laminated Sheets/Tarpaulins/Covers/Agricultural Films â Specification (Second Revision)

36111 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Workmanship)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (i)(Mass per unit area, g/m²)	-	500	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm²- (a) Longitudinal direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (ii)("Tensile strength1), Min,kg/cm² (b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iii)("After ageing at 70 ºC ± 1 ºC for 168 h, Max, kg/cm2 b) Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent a)Longitudinaldirection")	-	0	-
Cl-6.2, 6.3 & 6.8, Table-1 (iv)("Elongation at break, Min, percent b) Transverse direction")	-	0	-
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: a)Longitudinaldirection")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (v)("Tear strength, Min, g: b)Transverse direction")	-	1300	-
Cl-6.2, 6.3 & 6.8, Table-1 (vi)(Dart impact strength, Min, g)	-	850	-
Cl-6.2, 6.3 & 6.8, Table-1 (vii)(Average tensile strengthand elongation at breakafter exposing to UVradiation and weathering,Min, (kgf))	-	1300	-
Cl-6.4(Water Proofness Test)	-	1000	-
Cl-6.5(Strength of Joints/Seams)	-	1100	-
Cl-6.6(Flex Test)	-	3000	-
Cl-6.7(Ease of In-Situ Repair)	-	5000	-
Cl-7(Fixing of Eyelets (for tarpaulins only))	-	500	-
Cl-9(Packing and Marking)	-	500	-
Cl-6.3(Accelerated Ageing Test)	-	4200	-
Cl-5(Construction of sheets/tarpaulins/covers/agricultural films)	-	500	-

31 Dec, 2026

-
Included w.e.f 09.07.2025

4456

Sleen India Biz venture Private Limited, Agra

9139736

IS 12068 (1987)

Specification for rice bran fatty acids

12300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1/3.1.1/3.2(Description - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021)	-	1300	-
3.3, 6.1 Table 1 (iii)(Acid value - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021)	-	2500	-
3.3, 6.1 Table 1 (v)(Mineral Acidity - IS 12068:1987)	-	1000	-
3.3, 6.1 Table 1 (vi)(Ash - IS 12068:1987)	-	500	-
3.3, 6.1 Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
3.3, 6.1 Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
3.3, 6.1 Table 1 (ix)(Colour)	-	500	-
3.3, 6.1 Table 1 (x)(Flash Point - IS 1448 (P-21))	-	1000	-

-
Included w.e.f.23.07.2025

4457

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Stainless Steel Utensils

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	14500	-
Cl 3.2(Material used for composite bottom)	-	14500	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	14500	-
Cl 3.4(Material used for stainless steel lid)	-	14500	-
Cl 3.5(Material used for tempered glass lid)	-	14500	-
Cl 3.5(Material used for stainless steel rim)	-	14500	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	14500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	14500	-
Cl 4.2(Thickness of the finished utensil)	-	14500	-
Cl 4.3(Classification)	-	14500	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	14500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	14500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	14500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	14500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	14500	-
CL 5.2(Accessibility for cleaning)	-	14500	-
Cl 5.3(Joining of handles to the utensils)	-	14500	-
Cl 5.4(Requirement for handles)	-	14500	-
Cl 5.5(Welding (Finish))	-	14500	-
Cl 5.6(Finish of 3-ply utensil)	-	14500	-
Cl 5.7(Requirement for coating)	-	14500	-
Cl 5.8(Coating thickness test)	-	14500	-
Cl 5.8(Coating adhesion test)	-	14500	-
Cl 5.8.1(Thermal shock test (Coating))	-	14500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	14500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	14500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	14500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	14500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	14500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	14500	-
Cl 6.7(Nominal Capacity Test)	-	14500	-
Cl 8(Marking)	-	14500	-

-
-

4458

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	10200	For mechanical and performance tests
3.1, 4.1(Series of Nominal Capacity)	-	10200	For mechanical and performance tests
3.2, 4.2(Nominal Capacity )	-	10200	For mechanical and performance tests
3.3, 4.3(Material )	-	10200	For mechanical and performance tests
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	10200	For mechanical and performance tests
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	10200	For mechanical and performance tests
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	4000	For complete dimension test
3.5.2(Neck Length)	-	4000	For complete dimension test
3.5.3, 4.5.2(Dimensions of base )	-	4000	For complete dimension test
3.5.4, 4.5.3(Wall thickness)	-	4000	For complete dimension test
5(Marking )	-	10200	For mechanical and performance tests

-
-

4459

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1381 : Part 2 (2019)

Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type)	-	10200	For mechanical and performance tests
4(Series of capacities)	-	10200	For mechanical and performance tests
5(Material)	-	10200	For mechanical and performance tests
5(Material)	-	10200	For mechanical and performance tests
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
6(Dimensions)	-	4000	For complete dimension test
7(Ground glass joints)	-	10200	For mechanical and performance tests
8(Thermal shock endurance)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests
9(Marking)	-	10200	For mechanical and performance tests

-
-

4460

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing
6.1.1&3(Marking)	-	12800	For Complete Testing
3(Class of Accuracy)	-	12800	For Complete Testing
4.1(Nominal capacities)	-	12800	For Complete Testing
4.2(Accuracy)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1(Material)	-	12800	For Complete Testing
5.1.1(Limit of Alkalinity)	-	12800	For Complete Testing
5.2(Pattern of Pipette)	-	12800	For Complete Testing
5.3(Workmanship & Finish)	-	12800	For Complete Testing
5.4(i) Distance of graduation line from top of pipette.)	-	12800	For Complete Testing
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	12800	For Complete Testing
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	12800	For Complete Testing
5.4(iv) Wall thickness)	-	12800	For Complete Testing
5.4(a) pattern 2 pipette of 1 and 2ml )	-	12800	For Complete Testing
5.4(b) Other pipettes)	-	12800	For Complete Testing
5.4(v) Dia. of safety bulb (if provided ))	-	12800	For Complete Testing
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	12800	For Complete Testing
5.4(vii) Overall length, L)	-	12800	For Complete Testing
5.4(viii) Length of suction tube, L1 )	-	12800	For Complete Testing
5.4(ix) Length of delivery tube, L2 )	-	12800	For Complete Testing
5.4(x) Internal dia. of suction tube D1 )	-	12800	For Complete Testing
5.4(xi) External dia. of bulb D2 )	-	12800	For Complete Testing
5.4(xii) External dia. of delivery tube D3 )	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.5(Delivery Time)	-	12800	For Complete Testing
5.6&7(Graduation line & Visibility )	-	12800	For Complete Testing
6.1.2(Marking)	-	12800	For Complete Testing

-
-

4461

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Low nickel austenitic stainless steel sheet and strip

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
6(Freedom From Defects)	-	10000	-
9.3(Tensile Test-1608:Part 1)	-	10000	-
9.3, Table 3 (Yield Strength, Mpa)	-	10000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	10000	-
9.3, Table 3 (Elongation, %)	-	10000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
14.1(Thickness,mm)	-	10000	-
14.2( Width, mm)	-	10000	-
14.3(Length, mm)	-	10000	-
14.4(Flatness, mm)	-	10000	-
14.5(Camber, mm)	-	10000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	10000	-
17(Marking)	-	10000	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	10000	-
4.1(General requirements)	-	10000	-
6(Freedom from defects)	-	10000	-
7(Heat treatment)	-	10000	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	10000	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	10000	-
9.1(Sample plan)	-	10000	-
9.2(Tensile test)	-	10000	-
9.3(Mechanical properties)	-	10000	-
9.4(Erichsen cupping test)	-	10000	-
10(Retests)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
13(Edge condition)	-	10000	-
14.1(Thickness)	-	10000	-
14.2.1(Mill Edge)	-	10000	-
14.2.2(Trimmed Edge)	-	10000	-
14.3(Length)	-	10000	-
14.4(Flatness)	-	10000	-
15(Inspection)	-	10000	-
17(Marking)	-	10000	-
14.5(Camber)	-	10000	-

-
-

4462

National Test House (NWR) - NTH, Jaipur

8122904

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	5000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	5000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	5000	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	-
7.5(Density)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
7.6(Melt Flow Rate)	-	2000	-
4.2(Carbon black- a)carbon content)	-	1500	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	2000	-
7.5(Density)	-	2000	-
7.4 Table-2(Fusion Compatibility Test)	-	5000	-
7.3(Tensile Test)	-	1000	-
7.2(Reversion Test)	-	1000	-
7.1 Table -2(Hydraulic Characteristics)	-	5000	-
6.1(VISUAL APPEARANCE)	-	1000	-
5.1.2(Ovality)	-	1000	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2000	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	2000	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	2000	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	5000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	5000	-
6.1.3(Weldability Test- b) Acceptance test)	-	5000	-
3(Quick Coupled pipes)	-	500	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	500	-
4.1 (b)(HDPE couplers —)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	500	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-
4.1 .1.2.1(HDPE couplers)	-	500	-
4.1 .1.2.2(HDPE couplers)	-	500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1000	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1000	-
6.1.1, 6.1.1.1(Leakage Test)	-	5000	-
6.1.1, 6.1.1.1(Leakage Test)	-	5000	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.2.2(Hydraulic Proof Test)	-	5000	-
6.1.3, 6.1.3.1(Weldability Test)	-	5000	-
6.1.3.1.1(Weldability Test)	-	5000	-
6.1.3.2(Quick coupled fittings)	-	500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	500	-
7.2.1(Visual and Workmanship Requirement)	-	1000	-
6.2 b(Material Identification - Male & Female Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	-
6.3.4()	-	500	-
6.3.5(Material Identification - Saddle)	-	1000	-
6.3.5(Material Identification - Pipe Ends)	-	1000	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1000	-
4.2(Metallic Couplers)	-	1000	-
4.2(Metallic Couplers)	-	1000	-
7.2.1(Leakage Test)	-	5000	-
Cl.4.1.3(Den sity Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(MFR Test)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3(Thermal Stabi lity)	-	2000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Volatile Matter)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Content)	-	1500	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.5(Di men sion)	-	1000	-
Cl.5.1.l(Outside Diameter)	-	1000	-
Cl.5.1.l(Outside Diameter)	-	1000	-
Cl.6.2.L(Wall Thickness)	-	1000	-
Cl.6.2.4(Workmanship and Appearance)	-	1000	-
Cl.6.2.6(Rubber Ring Hardness)	-	1000	-
Cl.6.2.6(Ageing Test)	-	1000	-
Cl.7.1.l(Visual Anneara nce)	-	1000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.2(Hydraulic Characteristic)	-	5000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.4(Elongation)	-	1000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.5(Fusion Compatibility)	-	5000	-
Cl.7.1.6(Corrected Density)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.1.7(MFR Test)	-	2000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.l(Leakage Test)	-	5000	-
Cl.7.2.2(Cl.7.2.2)	-	500	-
Cl.7.2.3(Weld ability Test)	-	5000	-
Cl.7.2.3(Weld ability Test)	-	5000	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	1000	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	1000	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1000	-
6.1(Thermal Stability (OIT))	-	2000	-
6.1(Volatile Matter)	-	1000	-
6.1(Water content)	-	1000	-
6.1(Tensile strength at Yield & Elongation at break)	-	2000	-
6.1(Carbon Black Content)	-	1500	-
6.1(Carbon Black Dispersion)	-	1000	-
6.2.1(Base Density x 2)	-	2000	-
6.2.1(Melt Flow Index x 2)	-	2000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2000	-
6.2.1(Volatile Matter x 2)	-	1000	-
6.2.1(Water content x 2)	-	1000	-
6.2.1(Carbon Black Content x 2)	-	1500	-
6.2.1(Carbon Black Dispersion x 2)	-	1000	-
6.2.1(Wall thickness of male & female coupler)	-	1000	-
6.2.4(Workmanship and appearance (Visual))	-	1000	-
6.2.5(Holding attachment for coupler parts)	-	1000	-
6.2.5(Material Composition (Chemical Analysis))	-	3000	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	2000	-
6.2.6(Material Identification (Chemical Analysis))	-	2000	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	1000	-
6.2.6(Ageing Charges for rubber ring)	-	1000	-
7.1.1(Visual appearance of pipes)	-	1000	-
7.1.2(Hydraulic Characteristics)	-	5000	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
7.1.3(Reversion)	-	1000	-
7.1.4(Tensile strength & elongation)	-	2000	-
7.1.5(Fusion Compatibility test)	-	5000	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
7.1.6(Corrected Density)	-	2000	-
7.1.6(Base Density)	-	2000	-
7.1.6(Carbon black Content)	-	1500	-
7.1.7(Melt Flow Rate (MFR))	-	2000	-
7.2.1(Leakage test 1hour / 27°C)	-	5000	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	5000	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	5000	-
8(Supply of pipe (Visual))	-	1000	-
4.1.1 (Table-1)(Density)	-	2000	-
4.1.1 (Table-1)(Melt Flow Index)	-	2000	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2000	-
4.1.1 (Table-1)(Volatile Matter)	-	1000	-
4.1.1 (Table-1)(Water content)	-	1000	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	2000	-
4.1.4(Carbon Black Content)	-	1500	-
4.1.4(Carbon Black Dispersion)	-	1000	-
4.1.1(Polyethylene material)	-	1000	-
4.1.3, Table 1,(i)(Bass density)	-	2000	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	2000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2000	-
4.1.3, Table 1,(iv)(Volatile matter)	-	1000	-
4.1.3, Table 1,(v)(Water content)	-	1000	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	2000	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	2000	-
4.1.4(The Carbon Content and Dispersion)	-	2000	-
4.1.5(Carbon Black Specification)	-	1500	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	1000	-
7.1.2(Hydraulic Performance Characteristic)	-	5000	-
7.1.3(Reversion Test)	-	1000	-
7.1.4(Tensile Test)	-	2000	-
7.1.5(Fusion Compatibility Test)	-	5000	-
7.1.6(Corrected Density)	-	2000	-
7.1.7(Melt flow rate)	-	2000	-
7.2.1(Leakage Test)	-	5000	-
7.2.2(Hydraulic Proof Test)	-	5000	-
7.2.3(Weldability Test)	-	5000	-
7.3(Quick Couple Fitting)	-	1000	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	1000	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	500	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
6.1(Quick Coupled Pipes and Fittings)	-	1000	-
5.1, Table 1,(i)(Plain pipes)	-	500	-

31 Dec, 2026

-
Included w.e.f 16.07.2025 Exclusion: Cl 4.3 (Anti-oxidant) and excluding Sprinkler fitting

4463

National Test House (NWR) - NTH, Jaipur

8122904

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	1000	-
5(CLASSIFICATION OF PIPES)	-	500	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	1000	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	1000	-
7.2.1(DIMENSIONS-Socket)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	1000	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	1000	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	1000	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	20000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	5000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-
10.3(Effect on Water Test)	-	5000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	1000	-
7.1.4(Length)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	500	-
cL-13.1.1(Marking)	-	500	-
Cl-13.1.2(Marking)	-	500	-

31 Dec, 2026

-
Included w.e.f 16.07.2025 Excluding: Cl 6.1.2 (PVC Resin), Cl 6.1.1 (VCM Content)

4464

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- L)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- a)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- b)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- c1)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- e)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- h)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- h1)	-	6500	For complete dimensional test and other qualitative tests
3 Table 1(Dimensions- t)	-	6500	For complete dimensional test and other qualitative tests
4(Hardness- Near cutting edges)	-	5000	For mechanical test
4(Hardness- Body gripping surfce)	-	5000	For mechanical test
8.1(Cutting Test)	-	6500	For complete dimensional test and other qualitative tests
8.1(Cutting Test)	-	6500	For complete dimensional test and other qualitative tests
8.2(Tube Gripping Test)	-	6500	For complete dimensional test and other qualitative tests
8.3(Shock Test)	-	2000	For insulation and shock test
8.4(Torsion Test)	-	5000	For mechanical test
8.5(Handle Load Test)	-	5000	For mechanical test
8.5(Handle Load Test)	-	5000	For mechanical test
8.6(Bend Test)	-	6500	For complete dimensional test and other qualitative tests
8.7(Insulation Test)	-	2000	For insulation and shock test
6(Insulation)	-	2000	For insulation and shock test
5(Material testing (Chemical composition))	-	5000	For chemical test
5(Workmanship & Finish test)	-	6500	For complete dimensional test and other qualitative tests

-
Included w.e.f 22.07.2025

4465

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.3(Standard Mark on Conduit)	-	100	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	300	-
7.2(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	2000	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1000	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	900	-
10(Resistance to Heat -Ball presure test)	-	500	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	500	-
9.2(Bending Test At Room Temp)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	For BIS only Per Varity = Rs 15000/- For others Per Varity = Rs 30000/-
6.1(Marking)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
7.1.1(Maximum and minimum outside diameter of socket)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	0	-
7.2(Minimum inside diameter of conduit)	-	0	-
7.3(Length of conduit)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	0	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
10(Resistance to Heat -Ball presure test)	-	0	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	0	-
7.4(Unifomity of The wall Thickness)	-	0	-
7.3(Length of conduit)	-	0	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	0	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	0	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	0	-
6.3(Standard Mark on Conduit)	-	0	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	0	-
6.1 - d(Marking)	-	0	-
6.1 - c(Marking)	-	0	-
6.1 - b(Marking)	-	0	-
6.1 - a(Marking)	-	0	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	0	For BIS only Per Varity = Rs 15000/- For others Per Varity = Rs 30000/-

-
Included w.e.f 16.07.2025

4466

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

All thickness

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
Cl.13(Out of square)	-	5000	-
Cl.13(Flatness)	-	5000	-
Cl.13(Camber)	-	5000	-
Cl.13(Width)	-	5000	-
Cl.13(Thickness)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	5000	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 8(UTM)	-	5000	-
7(Material Test)	-	4000	-
9(Bend test)	-	5000	-
14(Calculation of weight)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9(Press)	-	5000	-
Cl 12(Workmanship)	-	5000	-
Cl 13(Length, Width & Thickness)	-	5000	-
8, Table 5 & 6(Tensile Strength)	-	5000	-
8, Table 5 & 6(Yield Strength)	-	5000	-
8, Table 5 & 6(Elongation)	-	5000	-
Clause 10(Cuppping Test)	-	5000	-
Clause 12(Freedom from defect)	-	5000	-
Clause 13(Length)	-	5000	-
Clause 7, Table 3, Note 1(Any Instrumental Method/Chemical Method)	-	4000	-
Clause 7, Table 3, Note 1(By Calculation)	-	4000	-
8, Table 5 & 6(Tensile Strength)	-	5000	-
8, Table 5 & 6(Yield Strength)	-	5000	-
8, Table 5 & 6(Elongation)	-	5000	-
Clause 10(Cuppping Test)	-	5000	-
Clause 12(Freedom from defect)	-	5000	-
Clause 13(Length)	-	5000	-
Clause 7, Table 3, Note 1(Boron)	-	4000	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	4000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
8, Table 5 & 6(IS 1608 Part 1)	-	5000	-
Clause 10(IS 10175)	-	5000	-
Clause 12(IS 1079)	-	5000	-
Clause 13(IS/ISO 16160)	-	5000	-
Clause 7, Table 3, Note 1(Boron)	-	4000	-
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	5000	-
Cl 10(Die Press)	-	5000	-
Cl 10(Die Press)	-	5000	-

-
Included w.e.f 28.07.2025

4467

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 16733 (2018)

Ferritic-Pearlitic Engineering Steels for Precipitation Hardening from Hot-Working Temperatures

All Grade / Type / Size / Designation

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Manufacturing process)	-	12000	-
5.2, table 3(Chemical composition)	-	8000	-
5.2, table 3(Chemical composition)	-	8000	-
5.3(Structure)	-	1000	-
5.4(Internal soundness)	-	0	-
5.5(Surface quality)	-	1000	-
5.6(Shape, dimension & tolerances)	-	2000	-
6.1(Inspection, testing & conformance of products)	-	100	-
6.2.1(Verification of the mechanical properties)	-	100	-
6.2.2(Testing of the surface quality)	-	100	-
6.2.3(Visual and dimensional inspection)	-	100	-
6.2.4(Retests)	-	100	-
7(Marking)	-	500	-

-
Included w.e.f 23.07.2025 Excluding Cl. 5.4 Internal Soundness (Optional Tests)

4468

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 16440 (2016)

Stainless steel milk cans - Specification

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Carbon)	-	30000	-
5.2(Sulphur)	-	30000	-
5.2(phosphorus)	-	30000	-
5.2(Manganese)	-	30000	-
5.2(Silicon)	-	30000	-
5.2(Chromium)	-	30000	-
5.2(Nickel)	-	30000	-
5.2(molybdenum)	-	30000	-
3.0(Capacity test)	-	30000	-
6.3(Hardness test)	-	30000	-
6.1(Pressure check for leakage and bulging)	-	30000	-
6.2(Drop test)	-	30000	-
6.4(Dye penetration test)	-	30000	-
"As per Clause 4 & Table 1"(Shape & Dimensions)	-	30000	-
As per Clause 5.4(Thickness of parts)	-	30000	-
As per Clause 5.5(Mass of can (Weight))	-	30000	-
As per Clause 5.6(Construction)	-	30000	-
Clause 5.6.1(Body)	-	30000	-
As per Clause 5.6.2(Handle)	-	30000	-
Clause 5.6.3(Bottom ring)	-	30000	-
Clause 5.6.4(Lid)	-	30000	-
Clause 5.6.6(Finish)	-	30000	-
Clause 5.6.7(Heat treatment and Passivation)	-	30000	-
Clause 6.5(Leakage test)	-	30000	-
Clause 4 & Table 1"(Shape & Dimensions)	-	30000	-
Clause 5.4(Thickness of parts)	-	30000	-
Clause 5.5(Mass of can (Weight))	-	30000	-
Clause 5.6(Construction)	-	30000	-
Clause 5.6.1(Body)	-	30000	-
Clause 5.6.2(Handle)	-	30000	-
Clause 5.6.3(Bottom ring)	-	30000	-
Clause 5.6.6(Finish)	-	30000	-
Clause 5.6.7(Heat treatment and Passivation)	-	30000	-
Clause 6.5(Leakage test)	-	30000	-

13 May, 2028

-
Included w.e.f 31.07.2025

4469

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS/ISO 9994 (2018)

Lighters Safety specifications First Revision

ALL

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Flame Generation)	-	21000	-
Cl.4.2(Flame Height)	-	21000	-
Cl.4.3(Flame-Height adjustment)	-	21000	-
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	21000	-
Cl.4.5(Flame Extinction)	-	21000	-
Cl.4.6(Volumetric displacement of Fuel)	-	21000	-
Cl.4.7(Mass of Fuel)	-	21000	-
Cl.5.1(External Finish)	-	21000	-
Cl.5.2(Compatibility of Fuel)	-	21000	-
Cl.5.3(Resistance to Fuel Loss)	-	21000	-
Cl.5.4(Resistance to dropping)	-	21000	-
Cl.5.5(Resistance to elevated Temperature)	-	21000	-
Cl.5.6(Resistance to internal Pressure)	-	21000	-
Cl.5.7(Burning Behavior)	-	21000	-
Cl.5.8(Resistance to cyclic burning)	-	21000	-
Cl.5.9(Resistance to Continue Burning)	-	21000	-
6.6, 6.6.3.1(Refilling test-IS/ISO 9994)	-	21000	-
6.6, 6.6.3.2(Refilling test-IS/ISO 9994)	-	21000	-

13 May, 2028

-
Included w.e.f 07.07.2025

4470

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 16218 (2014)

Forks - Specification

All Type

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	14500	-
3.2 (i)(Brass as parent material)	-	14500	-
3.2(ii)(Brass plated with pure silver)	-	14500	-
3.3(Plastic handle)	-	14500	-
4(Shapes and Dimensions)	-	14500	-
5(Manufacture)	-	14500	-
6.1(Workmanship)	-	14500	-
6.2(Finish)	-	14500	-
9(Marking)	-	14500	-
10(Packing)	-	14500	-

02 Jun, 2027

-
Included w.e.f. 02.09.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number