BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15210 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4381

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 13340 : PART 1 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Second Revision)

upto 50kVAr

249650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance measurement and output calculation)	-	24000.00	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	11000.00	-
9(Voltage tests between terminals)	-	3000.00	-
10(Voltage tests between terminals and container)	-	3000.00	-
11(Voltage tests between terminals and container)	-	5500.00	-
12(Sealing test)	-	11000.00	-
13(Thermal stability test)	-	24000.00	-
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	24000.00	-
7(Capacitance measurement and output calculation)	-	0	-
15(Lightning impulse voltage test between terminals and container)	-	10000.00	-
16(Discharge test)	-	12000.00	-
17(Ageing test)	-	51150.00	-
18(Self-healing test)	-	11000.00	-
19(Destruction test)	-	31000.00	-
20(Maximum permissible voltage)	-	8000.00	-
20.1(Long-duration voltages)	-	0	-
20.2(Long-duration voltages)	-	0	-
21(Maximum permissible current)	-	8000.00	-
22(Discharge device)	-	5500.00	-
23("Container connections ")	-	5000.00	-
24(Protection of the environment)	-	0	-
25(Other safety requirements)	-	0	-
26(Marking of the unit)	-	1250.00	-
26.1(Rating plate)	-	0	-
26.2(Standardized connection symbols)	-	0	-
26.3(Warning plate)	-	0	-
27(Marking of the bank)	-	1250.00	-
27.1(Instruction sheet or rating plate)	-	0	-
27.2(Warning plate)	-	0	-
28(General)	-	0	-
29(9 Choice of the rated voltage)	-	0	-
30(Operating temperature)	-	0	-
31(Special service conditions)	-	0	-
32(2 Overvoltages)	-	0	-
33(Overload currents)	-	0	-
34(Switching and protective devices and connections)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
37(Electromagnetic compatibility (EMC))	-	0	-
7(Capacitance measurement and output calculation)	-	0	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	0	-
9(Voltage tests between terminals)	-	0	-
10(Voltage tests between terminals and container)	-	0	-
11(Voltage tests between terminals and container)	-	0	-
12(Sealing test)	-	0	-
13(Thermal stability test)	-	0	-
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	0	-
7(Capacitance measurement and output calculation)	-	0	-
15(Lightning impulse voltage test between terminals and container)	-	0	-
16(Discharge test)	-	0	-
17(Ageing test)	-	0	-
18(Self-healing test)	-	0	-
19(Destruction test)	-	0	-
20(Maximum permissible voltage)	-	0	-
20.1(Long-duration voltages)	-	0	-
20.2(Long-duration voltages)	-	0	-
21(Maximum permissible current)	-	0	-
22(Discharge device)	-	0	-
23("Container connections ")	-	0	-
24(Protection of the environment)	-	0	-
25(Other safety requirements)	-	0	-
26(Marking of the unit)	-	0	-
26.1(Rating plate)	-	0	-
26.2(Standardized connection symbols)	-	0	-
26.3(Warning plate)	-	0	-
27(Marking of the bank)	-	0	-
27.1(Instruction sheet or rating plate)	-	0	-
27.2(Warning plate)	-	0	-
28(General)	-	0	-
29(9 Choice of the rated voltage)	-	0	-
30(Operating temperature)	-	0	-
31(Special service conditions)	-	0	-
32(2 Overvoltages)	-	0	-
33(Overload currents)	-	0	-
34(Switching and protective devices and connections)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
36(Capacitors connected to systems with audio-frequency remote control)	-	0	-
37(Electromagnetic compatibility (EMC))	-	0	-

20 Jun, 2028

-
Included w.e.f. 04.08.2025

4382

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17953 (2023)

uPVC Profiles for Windows And Doors Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5.1.1(UV Resistant Virgin Material)	-	2500	-
Cl. No.5.1.2(Non-UV Resistant Virgin Material)	-	2500	-
Cl. No.5.1.3, a), Table no. 1(i)(Monoextrusion or coextrusion of a layer of any visible surface)	-	800	-
Cl. No.5.1.3, a), Table no. 1(ii)("Non-visible surface and material covered by coextrusion")	-	800	-
Cl.No.5.2(Appearance of uPVC Profile)	-	1500	-
Cl.No.5.3.1and3.2.5, Table no. 2(i)(Depth (D))	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(ii)(Width (W))	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(iii)("Sight visible surface wall thickness, Max ")	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(iv)("Sight visible surface flatness, Max ")	-	1000	-
Cl.No.5.3.1and3.2.5, Table no. 2(v)(Parallelism, Max)	-	1000	-
Cl.No.5.3.2(Wall Thickness of Main Profiles)	-	1000	-
Cl.No.5.3.3(Tolerances on other Dimensions)	-	1000	-
Cl.No.5.3.4(Straightness)	-	1000	-
Cl.No.5.4(Mass of Profile)	-	2000	-
Cl.No.5.5("Heat Reversion ")	-	80000	-
Cl.No.5.6(Resistance to Impact of Falling Mass)	-	8000	-
Cl.No.5.7(Heat Ageing)	-	10000	-
Cl.No.5.8.1(Tensile Bending Test)	-	10000	-
Cl.No.5.8.2(Compression Bending Test)	-	10000	-
Cl.No.5.9.(Charpy Impact Resistance of Main Profile)	-	10000	-
Cl.No.5.10.(Resistance to Weathering)	-	800000	Complete Test Rs. 50000/-(Exclusive of Resistance to weathering test) Rs. 800000/- for Resistance to Weathering test.
Cl.No.5.11(Density)	-	2000	-
Cl.No.8(Marking)	-	100	-

15 Aug, 2028

-
Included w.e.f.22.07.2025

4383

National Test House (WR) - NTH, Mumbai

7107604

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

All ISC Grades and product range up to 3.00 mm

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	3000	NA
Cl. 7.2 Table 7(Bend Test)	-	1000	NA
Cl 9(Workmanship)	-	1000	NA
Cl 10(Length, Width & Thickness)	-	1000	NA
8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness)	-	1500	-
8.3(Rockwell Hardness test -HRB - IS:1586)	-	2000	-
7.3(Tensile strain hardening component - IS 15756)	-	3000	-
9(Freedom from defects)	-	1000	-
6.0(CARBON)	-	500	-
6.0(MANGANESE)	-	500	-
6.0(SILICON)	-	500	-
6.0(SULPHUR)	-	500	-
6.0(PHOSPHORUS)	-	500	-
6.0(MICRO ALLOYS)	-	500	-
6.0(ALUMINIUM)	-	500	-
6.0(NITROGEN)	-	500	-

-
-

4384

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	1000	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	300	-
28.0(Screws and Connections)	-	300	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
24.0(Components)	-	300	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	300	-
21.0(Mechanical Strength)	-	300	-
20.0(Stability and mechanical hazards)	-	200	-
19.0(Abnormal Operation)	-	1500	-
17.0(Overload Protection of transformer and associated circuit)	-	200	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
15.0(Moisture resistance)	-	1500	-
14.0(Transient Overvoltage)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1500	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	200	-
6.0(Marking and Instructions)	-	300	-
4(GENERAL REQUIREMENT)	-	200	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	200	-

03 Oct, 2027

-
Included w.e.f.31.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7(EMI/EMC) Cl 32 (Radiation, Toxicity and similar hazards)

4385

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	8000	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	8000	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	8000	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	8000	-
10(Tensile test)	-	8000	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-

08 May, 2028

-
-

4386

BIS, Eastern Regional Laboratory (ERL)

None

IS 4109 (2023)

KADAHI - SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1, Table-1 (i) (Kadahi Body)	-
Cl-3.1, Table-1 (ii) (Handle)	-
Cl-3.1, Table-1 (iii) (Rivet)	-
Cl-4.1, Table-2 (Round Shape nominal)	-
Cl-4.1, Table-2 (Round Shape-Overall Height H1)	-
Cl-4.1, Table-2 (Round Shape-Thickness at Bottom* Min)	-
Cl-4.1, Table-2 (Round Shape-Dia of Rod for Handle Min)	-
Cl-4.1, Table-2 (Raound shape-Pull Test Load)	-
Cl-4.1, Table-3 (Bowl Shape-Nominal Overall Height H1)	-
Cl-4.1, Table-3 (Bowl Shape- Thickness at Bottom Min)	-
Cl-4.1, Table-3 (Bowl Shape- Dia of Rod for Handle Min)	-
Cl-4.1, Table-3 (Bowl Shape- Pull Test Load)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Overall Height Round Shape H1)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Overall Height Bowl Shape H2)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Thickness at Bottom Min)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Dia of Rod for Handle)	-
Cl-4.1, Table-4 (Round and Bowl Shape-Pull Test Load)	-
Cl-5.3, Table-5 (Diameter, in mm)	-
Cl-5.3, Table-5 (Minimum Height)	-
Cl-5.3, Table-5 (Minimum width)	-
Cl-5.3, Table-5 (Minimum gap between rivet holes/weld)	-
Cl-5.3, Table-5 (Riveted/Welded)	-
Cl-6.1 (Pull Test)	-
Cl-6.2 (Leakage Test)	-

-
-

4387

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
6.0(Marking and Instructions)	-	500	-
7.0(Classification)	-	500	-
8.0(Protection against access to live parts)	-	500	-
10.0(Input and Current)	-	1500	-
11.0(Heating)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	3000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	1000	-
20.0(Stability and mechanical hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction)	-	500	-
23.0(Internal Wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	500	-
28.0(Screws and Connections)	-	500	-
29.0(Creepage Distances and Clearances)	-	500	-
30.0(Resistance To Heat and Fire)	-	1000	-
31.0(Resistance To Rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

4388

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	-
6(Classification- IS 302-1 )	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	2500	-
15.2(Moisture Resistance, IS 302-1)	-	2500	-
15(Moisture Resistance, IS 302-1)	-	2500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC), Cl 32 (Radiation, Toxicity and similar Hazard IS 302-1)

4389

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10(Power Input & Current)	-	2500	-
11(Temperature Rise/Heating)	-	2500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
14(Transient Over Voltage)	-	500	-
15(Moisture Resistance)	-	2500	-
16(Leakage Current and Electric Strength)	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	1500	-
20(Stability & Mechanical Hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal wiring)	-	500	-
24(Component)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
26(Terminals For External Conductors)	-	500	-
27(Provision For Earthing)	-	500	-
28(Screws & Connection)	-	500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
30(Resistance to Heat & Fire)	-	500	-
31(Resistance to Rusting)	-	250	-
32(Radiation ,Toxicity and similar hazards)	-	250	-
22.32(CONSTRUCTION)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

4390

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection)	-	500	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	500	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

4391

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	1000	-
4(GENERAL NOTES ON TESTS)	-	1000	-
5(RATING)	-	1000	-
6(CLASSIFICATION)	-	1000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

4392

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	50000	5% Discount for BIS
6(Classification- IS 302-1)	-	50000	5% Discount for BIS
5(General conditions for the tests)	-	50000	5% Discount for BIS
19.11.4.7(Harmonics)	-	180000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	180000	-
19.11.4.5(Immunity to conducted discharges)	-	180000	-
19.11.4.4(Surge immunity test)	-	180000	-
19.11.4.3(Fast transient bursts)	-	180000	-
19.11.4.2(Radiated fields)	-	180000	-
19.11.4.1(Electrostatic discharges)	-	180000	-
11.8(Temperature rise)	-	50000	5% Discount for BIS
11.7(Duration corresponding)	-	50000	5% Discount for BIS
11.6(Combined appliances)	-	50000	5% Discount for BIS
11.5(Motor-operated appliances)	-	50000	5% Discount for BIS
11.4(Heating appliances)	-	50000	5% Discount for BIS
8.1.5(Live parts of built-in appliances)	-	50000	5% Discount for BIS
18(Endurance)	-	50000	5% Discount for BIS
17(Overload protection of transformers and associated circuits)	-	50000	5% Discount for BIS
16(Leakage current and electric strength)	-	50000	5% Discount for BIS
4(General requirement)	-	50000	5% Discount for BIS
32.1(Radiation Toxicity and Similar Hazards)	-	50000	5% Discount for BIS
31(Resistance to Rusting)	-	50000	5% Discount for BIS
30.2(Needle Flame Test)	-	50000	5% Discount for BIS
30.2(Glow Wire Test)	-	50000	5% Discount for BIS
30.1(Ball pressure test)	-	50000	5% Discount for BIS
29(clearance, creepage distances and solid insulation)	-	50000	5% Discount for BIS
28(Screw test and connections)	-	50000	5% Discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	50000	5% Discount for BIS
26(Terminals for external conductors)	-	50000	5% Discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	50000	5% Discount for BIS
24(Components)	-	50000	5% Discount for BIS
23.1(Internal Wiring, IS 302-1)	-	50000	5% Discount for BIS
22.1(Construction, IS 302-1)	-	50000	5% Discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	50000	5% Discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	50000	5% Discount for BIS
19(Abnormal Operation)	-	50000	5% Discount for BIS
18(Endurance)	-	50000	5% Discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	50000	5% Discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	50000	5% Discount for BIS
16.2(Leakage Current (after Clause 15))	-	50000	5% Discount for BIS
16.1(General)	-	50000	5% Discount for BIS
16.0(General)	-	50000	5% Discount for BIS
15.3(Humidity Test)	-	50000	5% Discount for BIS
15.2(Spillage Test)	-	50000	5% Discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	50000	5% Discount for BIS
15.0(Moisture resistance)	-	50000	5% Discount for BIS
14(Transient Over Voltages)	-	50000	5% Discount for BIS
13.3(Electric Strength at operating temperature)	-	50000	5% Discount for BIS
13.2(Leakage current at operating temperature)	-	50000	5% Discount for BIS
13(Leakage current and electric strength at operating temperature)	-	50000	5% Discount for BIS
11.3(Heating)	-	50000	5% Discount for BIS
11.2(General)	-	50000	5% Discount for BIS
11.1(General)	-	50000	5% Discount for BIS
10.2(Current input)	-	50000	5% Discount for BIS
10.1(Power input)	-	50000	5% Discount for BIS
9(Starting of motor operation test requirements and tests)	-	50000	5% Discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	50000	5% Discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	50000	5% Discount for BIS
8.1.2(Protection against live parts in openings)	-	50000	5% Discount for BIS
8.1.1(Protection against live parts in all positions)	-	50000	5% Discount for BIS
7(Marking and instructions)	-	50000	5% Discount for BIS
A.2(Earth continuity test)	-	50000	5% Discount for BIS
Annex C(Ageing test on motors)	-	50000	5% Discount for BIS
Annex D(Thermal motor protectors)	-	50000	5% Discount for BIS
15.2(Moisture resistance)	-	50000	5% Discount for BIS
19.17(Abnormal Operation, IS 302-1)	-	50000	5% Discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	50000	5% Discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	50000	5% Discount for BIS
21.3(Mechanical Strength, IS 302-1)	-	50000	5% Discount for BIS
22.5(Construction)	-	50000	5% Discount for BIS
22.6(Construction, IS 302-1)	-	50000	5% Discount for BIS
22.11(Construction, IS 302-1)	-	50000	5% Discount for BIS
22.16(Construction)	-	50000	5% Discount for BIS
22.32(Construction, IS 302-1)	-	50000	5% Discount for BIS
22.42(Construction)	-	50000	5% Discount for BIS
23.3(Internal Wiring, IS 302-1)	-	50000	5% Discount for BIS
25.6(Supply connection and external flexible cords, IS 302-1)	-	50000	5% Discount for BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	50000	5% Discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50000	5% Discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	50000	5% Discount for BIS
26.5(Terminals for external conductors)	-	50000	5% Discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	50000	5% Discount for BIS
28.1(Screws and connections)	-	50000	5% Discount for BIS
22.2(Construction, IS 302-1)	-	50000	5% Discount for BIS
22.3(Construction, IS 302-1)	-	50000	5% Discount for BIS
B.22.4(Construction, IS 302-1)	-	50000	5% Discount for BIS
B.22.5(Construction, IS 302-1)	-	50000	5% Discount for BIS
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-

08 May, 2028

-
Included w.e.f. 28.07.2025 Exclusion: 24 (Components) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4393

BIS, Central Laboratory (CL)

None

IS 249 (2022)

SODIUM BICHROMATE TECHNICAL SPECIFICATION

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 , Table No. 1 , i) (Free moisture and combined water)	-
3.2 , Table No. 1 , ii) (Sodium bichromate (Na2Cr2O7) content)	-
3.2 , Table No. 1 , iii) (Sulphates (as Na2SO4))	-
3.2 , Table No. 1 , iv) (Chlorides ( as NaCl ),)	-
3.2 , Table No. 1 , v) (Calcium compounds (as CaSO4),)	-
3.2 , Table No. 1 , vi) (Matter insoluble in water)	-
3.2 , Table No. 1 , vii) (pH value (of aqueous solution))	-

-
-

4394

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15905 (2024)

Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories — Spigot Series —Specification

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(supply of material)	-	100	-
Cl-5(Manufacture)	-	500	-
Cl-5.4(pipes and fittings)	-	500	-
Cl-6(Joints)	-	500	-
Cl-6.2(EPDM)	-	2000	-
Cl-6.4(Minimum Free Lengths)	-	500	-
Cl-8(Crush tests on pipes ring)	-	1000	-
Cl-9(Hydrostatic test)	-	2500	-
Cl-10.2(External Diameters and Tolerances)	-	1000	-
Cl-10.3(Thickness and Tolerances)	-	500	-
Cl-10.4(Length and Tolerances)	-	500	-
Cl-10.5(Tolerances on Angles)	-	500	-
Cl-10.6(Straightness of Pipe)	-	500	-
Cl-10.7(End Faces)	-	500	-
Cl-10.8.1(Pipe)	-	500	-
Cl-10.8.2.1(Bend)	-	500	-
Cl-10.8.2.2(Bend with or without access door)	-	500	-
Cl-10.8.2.3(Long radius bend)	-	500	-
Cl-10.8.2.4(Long tail bend)	-	500	-
Cl-10.8.2.5(Horn plain bend)	-	500	-
Cl-10.8.2.6(Double bend)	-	500	-
Cl-10.8.2.7(Single branch)	-	500	-
Cl-10.8.2.8(Single branch with or without access door)	-	500	-
Cl-10.8.2.9(Double branch)	-	500	-
Cl-10.8.2.11(Diminishing pieces)	-	500	-
Cl-10.8.2.12(Offset)	-	500	-
Cl-10.8.2.13(Equal and unequal parallel branch)	-	500	-
Cl-10.8.2.14(P trap)	-	500	-
Cl-10.8.2.15(H ventilation pipe)	-	500	-
Cl-10.8.2.16(Y ventilation pipe)	-	500	-
Cl-10.8.2.17(T Y single branch)	-	500	-
Cl-10.8.2.18(Vent cowel)	-	500	-
Cl-10.8.2.19(Inspection pipe (clean-out pipe))	-	500	-
Cl-10.8.2.20(Unequal trap)	-	500	-
Cl-10.8.2.21(Single branch with or without door)	-	500	-
Cl-10.8.2.22(Single branch socketed with access door)	-	500	-
Cl-10.8.2.23(Multi inlet pipe)	-	500	-
Cl-10.8.2.24(Floor trap (deep seal))	-	500	-
Cl-10.8.2.25(Access door)	-	500	-
Cl-11.2(Resistance to Salt Spray)	-	1000	-
Cl-12(Marking)	-	100	-

08 May, 2028

-
-

4395

Bahadurgarh Footwear Development Services (BFDS), Bahadurgarh

8168806

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	500	-
Cl No.4.2(Construction)	-	300	-
Cl No.4.3(Whole Footwear)	-	300	-
4.3.1(Insole)	-	300	-
4.3.2(Toe spring height)	-	500	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	800	-
4.3.7(Complete Shoe Flexing)	-	640	-
4.3.9(Slip Resistance)	-	1000	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	450	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	600	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	600	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	800	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	600	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	450	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	450	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	450	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2000	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	450	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	600	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	600	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	600	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	800	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	600	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2000	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	450	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	800	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	600	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	800	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	600	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	600	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	600	-
Cl No . 5(MARKING AND PACKING)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	400	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	200	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	200	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	640	-
Clause 4.4, Table 1 ii)(Tear strength)	-	450	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	800	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	600	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	450	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	450	-
Clause 4.4, Table 2 iii)(Tear strength)	-	450	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.5, Table 3 i)(Tear strength)	-	450	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	600	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.6, Table 4 i)(Thickness)	-	200	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	600	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	800	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	800	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	600	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	600	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2000	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	450	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	800	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.7, Table 5 i)(Thickness)	-	200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	800	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	600	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	600	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	800	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	200	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	500	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	800	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	640	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	1500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	600	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	450	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	450	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	450	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	450	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	800	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	800	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	800	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	640	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	600	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	200	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	600	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	450	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	800	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	800	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	500	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	600	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	450	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-

02 Sep, 2027

-
-

4396

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15644 (2006)

Safety of electric toys

ALL

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	14500	-
8.0(Power Input)	-	14500	-
9.0(Heating and abnormal operation)	-	14500	-
10.0(Electrical strength at operating temperature)	-	14500	-
11.1(Moisture resistance)	-	14500	-
11.2(Resistant to humidity)	-	14500	-
12.0(Electric strength at room temperature)	-	14500	-
13.0(Mechanical strength)	-	14500	-
14.1(Construction)	-	14500	-
14.2(Construction)	-	14500	-
14.3(Construction)	-	14500	-
14.4(Construction)	-	14500	-
14.5(Construction)	-	14500	-
14.6(Construction)	-	14500	-
14.7(Construction)	-	14500	-
14.8(Construction)	-	14500	-
14.9(Construction)	-	14500	-
14.1(Construction)	-	14500	-
14.11(Construction)	-	14500	-
14.12(Construction)	-	14500	-
14.13(Construction)	-	14500	-
14.14(Construction)	-	14500	-
15.1(Protection of cords and wires)	-	14500	-
15.2(Protection of cords and wires)	-	14500	-
16.0(Components)	-	14500	-
17 Table-1(Screws and connections)	-	14500	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	14500	-
18.0(Clearance and creepage distance)	-	14500	-
19.1(Ball pressure test IEC 60695-10-2)	-	14500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	14500	-
19.2.2(Needle flame test)	-	14500	-
20.0(Radiation, toxicity and similar hazards)	-	14500	-
7.0(Marking and instructions)	-	14500	-
8.0(Power Input)	-	14500	-
9.0(Heating and abnormal operation)	-	14500	-
10.0(Electrical strength at operating temperature)	-	14500	-
11.1(Moisture resistance)	-	14500	-
11.2(Resistant to humidity)	-	14500	-
12.0(Electric strength at room temperature)	-	14500	-
13.0(Mechanical strength)	-	14500	-
14.1(Construction)	-	14500	-
14.2(Construction)	-	14500	-
14.3(Construction)	-	14500	-
14.4(Construction)	-	1450014500	-
14.5(Construction)	-	14500	-
14.6(Construction)	-	14500	-
14.7(Construction)	-	14500	-
14.8(Construction)	-	14500	-
14.9(Construction)	-	14500	-
14.1(Construction)	-	14500	-
14.12(Construction)	-	14500	-
14.13(Construction)	-	14500	-
14.14(Construction)	-	14500	-
15.1(Protection of cords and wires)	-	14500	-
15.2(Protection of cords and wires)	-	14500	-
16.0(Components)	-	14500	-
17 Table-1(Screws and connections)	-	14500	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	14500	-
18.0(Clearance and creepage distance)	-	14500	-
19.1(Ball pressure test IEC 60695-10-2)	-	14500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	14500	-
19.2.2(Needle flame test)	-	14500	-
20.0(Radiation, toxicity and similar hazards)	-	14500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	14500	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	14500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	14500	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	14500	-
9873 (Part-7) 4.10(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	14500	-
14.11(Construction)	-	14500	-

08 May, 2028

-
Included w.e.f. 09.07.2025, For IS 15644:2006 only.

4397

Sleen India Biz venture Private Limited, Agra

9139736

IS 17514 (2025)

Reusable Sanitary Pad/Sanitary Napkin/Period Panties - Specification (First Revision)

All size

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Material- cover or the top sheet)	-	500	-
Cl-3.2(Material- absorbent core;)	-	500	-
Cl-3.3(Material- bottom layer.)	-	500	-
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	500	-
Cl-5(FASTENING MECHANISM)	-	500	-
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	500	-
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	500	-
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	500	-
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	1500	-
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	Complete testing for cl. 8 table-2(i) is 1500/-.
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	2000	-
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	Complete testing for cl. 8 table-2(ii) is 1500/-.
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	2000	-
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	Complete testing for cl. 8 table-2(iii) is 2000/-.
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	1000	-
Cl-9.1(pH Value)	-	1000	-
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	2000	-
Cl-9.3(Hygiene Testing Requirement)	-	500	-
Cl-9.5(Phthalate Test)	-	5000	-
Cl-12(Marking)	-	500	-
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	1500	-
Cl-3.1(Material- cover or the top sheet)	-	0	Repeated Clause.
Cl-3.2(Material- absorbent core;)	-	0	Repeated Clause.
Cl-3.3(Material- bottom layer.)	-	0	Repeated Clause.
Cl-4(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
Cl-5(FASTENING MECHANISM)	-	0	Repeated Clause.
Cl-6, Table-1(Length (mm) (Absorbent Core Only))	-	0	Repeated Clause.
Cl-6, Table-1(Width (mm) (Absorbent Core Only))	-	0	Repeated Clause.
Cl-7(WASHING, DRYING AND HANDLING INSTRUCTION)	-	0	Repeated Clause.
Cl-8, Table-2 (i) (a)("Colour fastness to rubbing: Dry ")	-	0	Repeated Clause.
Cl-8, Table-2 (i) (b)(Colour fastness to rubbing: Wet)	-	0	Repeated Clause.
Cl-8, Table-2 (ii) (a)("Colour fastness to perspiration (acidic and alkaline): Colour change ")	-	0	Repeated Clause.
Cl-8, Table-2 (ii) (b)(Colour fastness to perspiration (acidic and alkaline): Staining)	-	0	Repeated Clause.
Cl-8, Table-2 (iii) (a)(Colour fastness to washing: Colour change)	-	0	Repeated Clause.
Cl-8, Table-2 (iii) (b)(Colour fastness to washing: Staining)	-	0	Repeated Clause.
Cl-8, Table-2 (iv)("Dimensional stability to washing, percentage, Max Length and width")	-	0	Repeated Clause.
Cl-9.1(pH Value)	-	0	Repeated Clause.
Cl-9.2(Ability to Withstand Pressure after Absorption)	-	0	Repeated Clause.
Cl-9.3(Hygiene Testing Requirement)	-	0	Repeated Clause.
Cl-9.5(Phthalate Test)	-	0	Repeated Clause.
Cl-12(Marking)	-	0	Repeated Clause.
Cl-9.3.1(Bacterial and Fungal Bioburden)	-	0	Repeated Clause.
Cl-9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	2000	-
Cl-9.3.3(Good Manufacturing Practice Guideline for Hygiene Requirement)	-	500	-

-
Included w.e.f 14.10.2025 Exclusion: Cl-9.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization)

4398

Intertek India Private Limited (289-290), Gurugram

8166336

IS 17334 (2025)

Textiles - Medical/Surgical Gowns and Medical/Surgical Drapes - Specification (First Revision)

Textiles - Medical/Surgical Gowns and Medical/Surgical Drapes - Specification

79556 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Workmanship and Finish)	-	500	For Surgical Gowns Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 71876 Rs. For Surgical Drapes Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 50036 Rs.
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	5760	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	5760	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	7920	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	15840	-
Cl-5.1, 6.2 Table-1 (v)(Particle release)	-	10800	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	4896	Rs. 2448 for Dry Rs. 2448 for Wet
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	4320	Rs. 2160 for Dry Rs. 2160 for Wet
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	15840	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	15840	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	15840	-
Cl-5.1, 6.2 Table-1 (xii)("Breathability test (water vapour transmission rate), [g/m2/day, Max]")	-	6000	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	5760	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	5760	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	7920	-
Cl-5.1, 6.2 Table-2 (iv)(Particle release)	-	10800	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	4896	Rs. 2448 for Dry Rs. 2448 for Wet
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	4320	Rs. 2160 for Dry Rs. 2160 for Wet
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	15840	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	15840	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	15840	-
Cl-5.3(Barrier Properties)	-	79556	For Surgical Gowns Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 71876 Rs. For Surgical Drapes Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 50036 Rs.
Cl-7(Marking)	-	0	-
Cl-4(Workmanship and Finish)	-	500	-
Cl-5.1, 6.2 Table-1 (i)(Impact penetration (g))	-	5760	-
Cl-5.1, 6.2 Table-1 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	5760	-
Cl-5.1, 6.2 Table-1 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	7920	-
Cl-5.1, 6.2 Table-1 (iv)(Viral penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	15840	-
Cl-5.1, 6.2 Table-1 (v)(Particle release)	-	10800	-
Cl-5.1, 6.2 Table-1 (vi)(Tensile strength (dry and wet) (N))	-	4896	Rs. 2448 for Dry Rs. 2448 for Wet
Cl-5.1, 6.2 Table-1 (vii)(Bursting strength (dry and wet) (kPa))	-	4320	Rs. 2160 for Dry Rs. 2160 for Wet
Cl-5.1, 6.2 Table-1 (viii)(Cleanliness-microbial (CFU/100 cm2))	-	15840	-
Cl-5.1, 6.2 Table-1 (ix)(Resistance to microbial penetration — Dry (CFU))	-	15840	-
Cl-5.1, 6.2 Table-1 (x)(Resistance to microbial penetration — Wet (IB))	-	15840	-
Cl-5.1, 6.2 Table-1 (xii)("Breathability test (water vapour transmission rate), [g/m2/day, Max]")	-	6000	-
Cl-5.1, 6.2 Table-2 (i)(Impact penetration (g))	-	5760	-
Cl-5.1, 6.2 Table-2 (ii)(Hydrostatic resistance (cmwc), the rate of rising at 60 cmwc/min)	-	5760	-
Cl-5.1, 6.2 Table-2 (iii)(Blood penetration resistance, pressure cycle upto 14 kPa, procedure D)	-	7920	-
Cl-5.1, 6.2 Table-2 (iv)(Particle release)	-	10800	-
Cl-5.1, 6.2 Table-2 (v)(Tensile strength (dry and wet) (N))	-	4896	Rs. 2448 for Dry Rs. 2448 for Wet
Cl-5.1, 6.2 Table-2 (vi)(Bursting strength (dry and wet) (kPa))	-	4320	Rs. 2160 for Dry Rs. 2160 for Wet
Cl-5.1, 6.2 Table-2 (vii)(Cleanliness-microbial (CFU/100 cm2))	-	15840	-
Cl-5.1, 6.2 Table-2 (viii)(Resistance to microbial penetration — Dry (CFU))	-	15840	-
Cl-5.1, 6.2 Table-2 (ix)(Resistance to microbial penetration — Wet (IB))	-	15840	-
Cl-5.3(Barrier Properties)	-	79556	For Surgical Gowns Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 71876 Rs. For Surgical Drapes Complete Testing Charges- Level 1: 42116 Rs., Level 2: 63716 Rs., Level 3: 79556 Rs., Level 4: 50036 Rs.

-
Included w.e.f 28.07.2025 Exclusion: Cl-5.1, 6.2 Table-1 (xi) (1) ("Biocompatibility evaluation test - Cytotoxicity"),Cl-5.1, 6.2 Table-1 (xi) (2) ("Biocompatibility evaluation test - Irritation"),Cl-5.1, 6.2 Table-1 (xi) (3) ("Biocompatibility evaluation test - Skin sensitization")

4399

Classic Testing & Research Centre (B17), Noida

8180826

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	8000	-
Cl-4.2(Energy source classifications)	-	8000	-
Cl-4.3(Protection against energy sources)	-	8000	-
Cl-4.4(Safeguards)	-	8000	-
Cl-4.5(Explosion)	-	8000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	8000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	8000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	8000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	8000	-
Cl-4.10(Components requirements)	-	8000	-
Cl-5.1(General- Electrically-caused injury)	-	8000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	8000	-
Cl-5.3(Protection against electrical energy sources)	-	8000	-
Cl-5.4(Insulation materials and requirements)	-	8000	-
Cl-5.5(Components as safeguards)	-	8000	-
Cl-5.6(Protective conductor)	-	8000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	8000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	8000	-
Cl-6.1(General- Electrically-caused fire)	-	8000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	8000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	8000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	8000	-
Cl-6.5(Internal and external wiring)	-	8000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	8000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	8000	-
Cl-7.3(Ozone exposure)	-	8000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	8000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	8000	-
Cl-8.1(General- Mechanically-caused injury)	-	8000	-
Cl-8.2(Mechanical energy source classifications)	-	8000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	8000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	8000	-
Cl-8.5(Safeguards against moving parts)	-	8000	-
Cl-8.6(Stability of equipment)	-	8000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	8000	-
Cl-8.8(Handle strength)	-	8000	-
Cl-8.9(Wheels or casters attachment requirements)	-	8000	-
Cl-8.10(Carts, stands, and similar carriers)	-	8000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	8000	-
Cl-9.1(General-Thermal burn injury)	-	8000	-
Cl-9.2(Thermal energy source classifications)	-	8000	-
Cl-9.3(Touch temperature limits)	-	8000	-
Cl-9.4(Safeguards against thermal energy sources)	-	8000	-
Cl-9.5(Requirements for safeguards)	-	8000	-
Cl-9.6(Requirements for wireless power transmitters)	-	8000	-
Annex A(Examples of equipment within the scope of this document)	-	8000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	8000	-
Annex B-2(Normal operating conditions)	-	8000	-
Annex B-3(Simulated abnormal operating conditions)	-	8000	-
Annex B-4(Simulated single fault conditions)	-	8000	-
Annex D-1(Impulse test generators)	-	8000	-
Annex D-2(Antenna interface test generator)	-	8000	-
Annex D-3(Electronic pulse generator)	-	8000	-
Annex E-1(Electrical energy source classification for audio signals)	-	8000	-
Annex E-2(Audio signals used during test)	-	8000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	8000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	8000	-
Annex F-2(Letter symbols and graphical symbols)	-	8000	-
Annex F-3(Equipment markings)	-	8000	-
Annex F-4(Instructions)	-	8000	-
Annex F-5(Instructional safeguards)	-	8000	-
Annex G-1(Switches)	-	8000	-
Annex G-2(Relays)	-	8000	-
Annex G-3(Protective devices)	-	8000	-
Annex G-4(Connectors)	-	8000	-
Annex G-5(Wound components)	-	8000	-
Annex G-6(Wire insulation)	-	8000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	8000	-
Annex G-8(Varistors)	-	8000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	8000	-
Annex G-10(Resistors)	-	8000	-
Annex G-11(Capacitors and RC units)	-	8000	-
Annex G-12(Optocouplers)	-	8000	-
Annex G-13(Printed boards)	-	8000	-
Annex G-14(Coatings on component terminals)	-	8000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	8000	-
Annex H-2(Method A)	-	8000	-
Annex H-3(Method B)	-	8000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	8000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	8000	-
Annex J-2(Type tests)	-	8000	-
Annex J-3(Testing during manufacturing)	-	8000	-
Annex K-1(General- Safety interlocks)	-	8000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	8000	-
Annex K-3(Inadvertent change of operating mode)	-	8000	-
Annex K-4(Interlock safeguard override)	-	8000	-
Annex K-5(Fail-safe)	-	8000	-
Annex K-6(Mechanically operated safety interlocks)	-	8000	-
Annex K-7(Interlock circuit isolation)	-	8000	-
Annex L-1(General requirements)	-	8000	-
Annex L-2(Permanently connected equipment)	-	8000	-
Annex L-3()	-	8000	-
Annex L-4(Single-phase equipment)	-	8000	-
Annex L-5(Three-phase equipment)	-	8000	-
Annex L-6(Switches as disconnect devices)	-	8000	-
Annex L-7(Plugs as disconnect devices)	-	8000	-
Annex L-8(Multiple power sources)	-	8000	-
Annex L-9(Compliance criteria)	-	8000	-
Annex M-1(General requirements)	-	8000	-
Annex M-2(Safety of batteries and their cells)	-	8000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	8000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	8000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	8000	-
Annex M-6(Safeguards against short-circuits)	-	8000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	8000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	8000	-
Annex M-9(Preventing electrolyte spillage)	-	8000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	8000	-
Annex N(Electrochemical potentials (V))	-	8000	-
Annex O(Measurement of creepage distances and clearances)	-	8000	-
Annex P-1(General-Safeguards against conductive objects)	-	8000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	8000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	8000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	8000	-
Annex Q-1(Limited power source)	-	8000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	8000	-
Annex R(Limited short-circuit test)	-	8000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	8000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	8000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	8000	-
Annex S-4(Flammability classification of materials)	-	8000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	8000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	8000	-
Annex T-1(General-Mechanical strength tests)	-	8000	-
Annex T-2(Steady force test, 10 N)	-	8000	-
Annex T-3(Steady force test, 30 N)	-	8000	-
Annex T-4(Steady force test, 100 N)	-	8000	-
Annex T-5(Steady force test, 250 N)	-	8000	-
Annex T-6(Enclosure impact test)	-	8000	-
Annex T-7(Drop test)	-	8000	-
Annex T-8(Stress relief test)	-	8000	-
Annex T-9(Glass impact test)	-	8000	-
Annex T-10(Glass fragmentation test)	-	8000	-
Annex T-11(Test for telescoping or rod antennas)	-	8000	-
Annex V-1(Accessible parts of equipment)	-	8000	-
Annex V-2(Accessible part criterion)	-	8000	-
Annex W(Comparison of terms introduced in this document)	-	8000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	8000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	8000	-
Annex Y-2(Resistance to UV radiation)	-	8000	-
Annex Y-3(Resistance to corrosion)	-	8000	-
Annex Y-4(Gaskets)	-	8000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	8000	-
Annex Y-6(Mechanical strength of enclosures)	-	8000	-

15 Oct, 2027

-
Included w.e.f 12.11.2025 Exclusion: Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation),Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)"),Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex C-1 (Protection of materials in equipment from UV radiation), , Annex C-2 (UV light conditioning test), Annex G-15 (Pressurized liquid filled components or LFC assemblies), Annex G-16 (IC that includes a capacitor discharge function (ICX)), Annex U ("Mechanical strength of CRTs and protection against the effects of implosion")

4400

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1573 (1986)

Specification for electroplated coatings of zinc on iron and steel (Second Revision)

All Grade / Type / Size / Designation

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Finish and Appearance)	-	2000	-
4.1.2(Supplimentary Treatment)	-	2000	-
4.2(Thickness and Type of Zinc Coating)	-	2000	-
4.4(Lustre)	-	2000	-
4.5(Corrosion Resistance)	-	2000	-
5(Basis Metal)	-	3500	-
6(Heat Treatment)	-	4000	-
6.4(Heat-Treatment After Plating Hydrogen Embrittlement Relief)	-	4000	-
8(Test Specimens)	-	100	-
9.1.1(Supplementary Treatments)	-	700	-
9.1.1.2(Performance of chromate coating)	-	700	-
9.1.1.4(Adhesion)	-	700	-
9.2(Thickness)	-	700	-
9.3(Adhesion)	-	700	-
9.4(Corrosion Resistance)	-	800	-
13(Marking)	-	200	-
9.1.1.3(Covering)	-	700	-

-
Included w.e.f 07.08.2025

4401

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 341 (2016)

Black japan, types a, b and c - Specification (Second Revision)

TYPE A , B & C

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Composition)	-	0	There is no option to put the durability test parameter in the BIS Portal. So please resolve the matter.
Clause-5.2(Reaction with White Paint)	-	400	White paint Conforming to specification IS : 13607 should be provided.
Clause5.3-(Reaction with Varnish, Exterior)	-	400	Varnish Conforming to specification IS : 524 should be provided.
Clause-5.4.1(Compounds of lead)	-	400	-
Clause-5.9 & 8.1 Table-1 S.No. 1(i)(Drying time, h, Max)	-	400	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ii)(Finish)	-	200	Approved sample to be provided.
Clause-5.9 & 8.1 Table-1 S.No. 1(iii)(Volatile matter content, percent by mass, Max)	-	300	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iv)(Ash content percent by mass)	-	750	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) a)(Bend test)	-	200	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) b) (Scratch hardness)	-	200	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vi)(Stripping test)	-	250	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vii)(Resistance to kerosene)	-	200	-
Clause-5.9 & 8.1 Table-1 S.No. 1(viii)(Resistance to heat (for 2 h))	-	400	-
Clause-5.9 & 8.1 Table-1 S.No. 1(x)(Keeping properties)	-	0	-
Clause-6(Packing and Marking )	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ix)(Flash point)	-	400	-
Clause-5.1(Composition)	-	0	-
Clause-5.2(Reaction with White Paint)	-	0	-
Clause5.3-(Reaction with Varnish, Exterior)	-	0	-
Clause-5.4.1(Compounds of lead)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(i)(Drying time, h, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ii)(Finish)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iii)(Volatile matter content, percent by mass, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iv)(Ash content percent by mass)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) a)(Bend test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) b) (Scratch hardness)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vi)(Stripping test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vii)(Resistance to kerosene)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(viii)(Resistance to heat (for 2 h))	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(x)(Keeping properties)	-	500	-
Clause-6(Packing and Marking )	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ix)(Flash point)	-	0	-
Clause-5.1(Composition)	-	0	-
Clause-5.2(Reaction with White Paint)	-	0	-
Clause5.3-(Reaction with Varnish, Exterior)	-	0	-
Clause-5.4.1(Compounds of lead)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(i)(Drying time, h, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ii)(Finish)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iii)(Volatile matter content, percent by mass, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iv)(Ash content percent by mass)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) a)(Bend test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) b) (Scratch hardness)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vi)(Stripping test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vii)(Resistance to kerosene)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(viii)(Resistance to heat (for 2 h))	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(x)(Keeping properties)	-	0	-
Clause-6(Packing and Marking )	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ix)(Flash point)	-	0	-
Clause-5.1(Composition)	-	0	-
Clause-5.2(Reaction with White Paint)	-	0	-
Clause5.3-(Reaction with Varnish, Exterior)	-	0	-
Clause-5.4.1(Compounds of lead)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(i)(Drying time, h, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ii)(Finish)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iii)(Volatile matter content, percent by mass, Max)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(iv)(Ash content percent by mass)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) a)(Bend test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(v) b) (Scratch hardness)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vi)(Stripping test)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(vii)(Resistance to kerosene)	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(viii)(Resistance to heat (for 2 h))	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(x)(Keeping properties)	-	0	-
Clause-6(Packing and Marking )	-	0	-
Clause-5.9 & 8.1 Table-1 S.No. 1(ix)(Flash point)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2025 Exclusion: Clause-6 (Packing and Marking )

4402

EMC Testing and Compliance LLP, Gurugram

8141526

IS 251 (2024)

SODA ASH, TECHNICAL â SPECIFICATION (fifth revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1("Description ( IS 251 : 2024 )")	-	1000	-
4.2("Bulk Density ( IS 251 : 2024 )")	-	1000	-
4.3("Volatile Matter Content ( IS 251 : 2024 )")	-	1000	-
4.4("Sieve Analysis of Dense Grade Soda Ash ( IS 251 : 2024 )")	-	1000	-
4.4.1("Material retained on 1.70 mm IS Sieve ( IS 251 : 2024 )")	-	1000	-
4.4.1("Material passing through 75 μm IS Sieve ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (i)("Total alkalinity (as Na₂CO₃) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (ii)("Matter insoluble in water ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (iii)("Sulphate (Na₂SO₄) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (iv)("Chloride (as NaCl) ( IS 251 : 2024 )")	-	1000	-
4.5 Table 1 (5)("Iron (as Fe₂O₃) ( IS 251 : 2024 )")	-	1000	-

19 Jul, 2027

-
Included w.e.f.18.08.2025

4403

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 2373 (1981)

Water Meters (Bulk Type)

50 mm and 80 mm

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS
3.0(. NOMINAL SIZE)	-	115000	20% discount to BIS
4.1,(MATERIALS AND MANUFACTURE-General)	-	115000	20% discount to BIS
4.2.1,(Casing and Body- Casing)	-	115000	20% discount to BIS
4.2.2, Fig. 2(Casing and Body- Body)	-	115000	20% discount to BIS
4.3(Connections)	-	115000	20% discount to BIS
4.4(Screws, Studs, and Nuts)	-	115000	20% discount to BIS
4.5(Registration Box)	-	115000	20% discount to BIS
4.6(Cap)	-	115000	20% discount to BIS
4.7(Strainer)	-	115000	20% discount to BIS
4.8(Runners (Impellers))	-	115000	20% discount to BIS
4.9(Runner Chamber)	-	115000	20% discount to BIS
4.1(Gears)	-	115000	20% discount to BIS
4.11(Bearings)	-	115000	20% discount to BIS
4.12, Table 2(Counting Mechanism)	-	115000	20% discount to BIS
4.13(Dial)	-	115000	20% discount to BIS
4.14(Sealing)	-	115000	20% discount to BIS
4.15(Regulator)	-	115000	20% discount to BIS
4.16(Location of Serial Number)	-	115000	20% discount to BIS
5.1.1,(PERFORMANCE REQUIREMENTS-Temperature Suitability Test )	-	115000	20% discount to BIS
5.2 & 8.3(Hydrostatic Test)	-	115000	20% discount to BIS
5.3.1 Table 3(Capacity Ratings for Water Meters-Nominal Capacity or Short Period Rating 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.3.2 Table 4 & 8.3(Recommended Capacities for Intermediate Flows 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.4 Table 5 & 8.3(Minimum Starting Flow 1.Vane-Wheel Type 2.Helical Type)	-	115000	20% discount to BIS
5.5 Table 4 & 8.3 & 8.4.2(Metering Accuracy)	-	115000	20% discount to BIS
6.0(FROST PROTECTION DEVICES)	-	115000	20% discount to BIS
7.0(MARKING)	-	115000	20% discount to BIS

22 May, 2029

-
-

4404

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 13607 (1992)

Heady mixed paint, finishing, general purposes, synthetic - Specification

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.1 (General)	-	400	-
Clause-4.2(Composition)	-	1000	-
Clause-4.3 Table-1 S.No-1 (i), a)(Consistency)	-	200	-
Clause-4.3 Table-1 S.No-1 (ii)(Drying time, Max)	-	600	-
Clause-4.3 Table-1 S.No-1 (iii), a)(Finish)	-	150	-
Clause-4.3 Table-1 S.No-1 (iii), b)(Fineness of grind, Max)	-	200	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass in kg/10 1, Min)	-	200	-
Clause-4.3 Table-1 S.No-1 (v)(Gloss ( Specular Reflection ))	-	250	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	150	-
Clause-4.3 Table-1 S.No-1 (vii)(Volume Solids, Min)	-	400	-
Clause-4.3 Table-1 S.No-1 (viii)(Flexibility and adhesion)	-	200	-
Clause-4.3 Table-1 S.No-1 (ix)(Scratch hardness)	-	200	-
Clause-4.3 Table-1 S.No-1 (x)(Stripping test)	-	250	-
Clause-4.3 Table-1 S.No-1 (xi)(Resistance to salt spray)	-	1500	-
Clause-4.3 Table-1 S.No-1 (xii)(Presence of rosin and rosin derivatives)	-	300	-
Clause-4.3 Table-1 S.No-1 (xiii)(Lead restriction except for red, yellow and green colours)	-	400	-
Clause-4.3 Table-1 S.No-1 (xix)(Flash point)	-	400	-
Clause-4.3 Table-1 S.No-1 (xv)(Accelerated storage stability test)	-	1000	-
Clause-4.3 Table-1 S.No-1 (xvi)(Durability)	-	3000	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.1 (General)	-	0	-
Clause-4.2(Composition)	-	0	-
Clause-4.3 Table-1 S.No-1 (i), a)(Consistency)	-	0	-
Clause-4.3 Table-1 S.No-1 (ii)(Drying time, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii), a)(Finish)	-	0	-
Clause-4.3 Table-1 S.No-1 (iii), b)(Fineness of grind, Max)	-	0	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass in kg/10 1, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (v)(Gloss ( Specular Reflection ))	-	0	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	0	-
Clause-4.3 Table-1 S.No-1 (vii)(Volume Solids, Min)	-	0	-
Clause-4.3 Table-1 S.No-1 (viii)(Flexibility and adhesion)	-	0	-
Clause-4.3 Table-1 S.No-1 (ix)(Scratch hardness)	-	0	-
Clause-4.3 Table-1 S.No-1 (x)(Stripping test)	-	0	-
Clause-4.3 Table-1 S.No-1 (xi)(Resistance to salt spray)	-	0	-
Clause-4.3 Table-1 S.No-1 (xii)(Presence of rosin and rosin derivatives)	-	0	-
Clause-4.3 Table-1 S.No-1 (xiii)(Lead restriction except for red, yellow and green colours)	-	0	-
Clause-4.3 Table-1 S.No-1 (xix)(Flash point)	-	0	-
Clause-4.3 Table-1 S.No-1 (xv)(Accelerated storage stability test)	-	0	-
Clause-4.3 Table-1 S.No-1 (xvi)(Durability)	-	0	-
Clause-5(Packing and Marking )	-	0	-
Clause-4.3 Table-1 S.No-1 (i), b)(Relative consistency (By Ford Cup No. 4 at 27 ± 0.5°C))	-	0	-

31 Dec, 2026

-
Included w.e.f.08.08.2025

4405

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	15000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	15000	-
5.4.2(a)( Aggregates Impact Value)	-	15000	-
5.4.2(b)( Aggregates Impact Value)	-	15000	-
5.4.3(a)( Aggregate Abrasion Value)	-	15000	-
5.4.3(b)( Aggregate Abrasion Value)	-	15000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	15000	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	15000	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	15000	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	15000	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	15000	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	15000	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	15000	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	15000	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	15000	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	15000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	15000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	15000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	15000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	15000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	15000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	15000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	15000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	15000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	15000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	15000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	15000	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	15000	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	15000	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	15000	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	15000	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	15000	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	15000	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	15000	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	15000	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	15000	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	15000	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	15000	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	15000	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	15000	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	15000	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	15000	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	15000	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	15000	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	15000	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	15000	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	15000	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	15000	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	15000	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	15000	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	15000	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	15000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	15000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	15000	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	15000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	15000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	15000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	15000	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	15000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	15000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	15000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	15000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	15000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	15000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	15000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	15000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	15000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	15000	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	15000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	15000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	15000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	15000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	15000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	15000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	15000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	15000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	15000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	15000	-
5.5(Soundness By Magnesium Sulphate)	-	15000	-
7.2(Moisture Content)	-	15000	-
7.2(Bulking Of Fine Aggregate)	-	15000	-
7.2(Bulk Density loose)	-	15000	-
7.2(Bulk Density Rodded)	-	15000	-
5.5(Soundness By Magnesium Sulphate)	-	15000	-
7.2(Moisture Content)	-	15000	-
7.2(Bulk Density loose)	-	15000	-
7.2(Bulk Density Rodded)	-	15000	-
5.3(Elongation Index)	-	15000	-
5.3(Flakiness Index)	-	15000	-
5.6(Alkali Agregate Reaction )	-	15000	-
5.7 table 3(WaterAbsorption)	-	15000	-
5.7 table 3(Specific Gravity)	-	15000	-
5.3(Flakiness & Elongation)	-	15000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	15000	-
5.7 table 4 (Calcium oxide)	-	15000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	15000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	15000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	15000	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	15000	-
Clause 5.6(Nature of Aggregate)	-	15000	-
Clause 5.6(Dissolved Silica)	-	15000	-
Clause 5.6(Reduction in Alkalinity)	-	15000	-
Clause 5.1(General)	-	15000	-
Clause 5.1(General)	-	15000	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	15000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	15000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	15000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	15000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	15000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	15000	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	15000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	15000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	15000	-
Table 6 Cl. 5.7 (iv)()	-	15000	-
Table 6 Cl. 5.7 (iv)()	-	15000	-

-
Included w.e.f 22.07.2025

4406

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 15558 (2024)

INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-5.1(water heater)	-	500	-
Cl-5.2(copper and copper alloy)	-	500	-
Cl-5.3(Non-metallic materials)	-	500	-
Cl-5.4(Mixing tube and burner head)	-	500	-
Cl-6.3(All Water connections)	-	200	-
Cl-6.4(water inlet and outlet connections)	-	200	-
Cl-6.6(Gas Inlet Connections)	-	200	-
Cl-7(Flame visibility)	-	500	-
Cl-8(Gas Taps)	-	500	-
Cl-9(Flame failuse device)	-	500	-
Cl-11(Protection against accidental overheating)	-	800	-
Cl-13(General condition of test)	-	100	-
Cl-14(Gas Soundness)	-	1200	-
Cl-15(Water Soundness)	-	1000	-
Cl-16(Thermal efficiency)	-	800	-
Cl-17(carbon monoxide/carbon dioxide)	-	800	-
Cl-18(Gas Consumption)	-	200	-
Cl-19(Ignition and flame travel)	-	800	-
Cl-20(FLAME STABILITY)	-	200	-
Cl-21(NOISE CONTROL)	-	700	-
Cl-22(FLASH-BACK)	-	1000	-
Cl-24("FIRE HAZARDS AND LIMITING TEMPERATURE")	-	1000	-
Cl-25(TIME FOR TEMPERATURE RISE)	-	500	-
Cl-26(HOT WATER OUTPUT TEST)	-	500	-

-
Included w.e.f. 31.07.2025

4407

Sleen India Biz venture Private Limited, Agra

9139736

IS 3521 : Part 5 (2021)

Personal Fall Arrest Systems Specification Part 5 Connectors with self-closing and self-locking gates

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.1(General requirement)	-	2000	-
Clause No. 4.2.1(" Gate-face resistance ")	-	5000	-
Clause No. 4.2.2(" Gate side-load resistance ")	-	5000	-
Clause No. 4.3("Static strength ")	-	8000	-
Clause No. 4.4(" Corrosion resistance ")	-	7000	-
Clause No. 6.2(Marking)	-	1000	-
Clause No. 6.3(Packaging)	-	1000	-
Clause No. 4.1(General requirement)	-	0	-
Clause No. 4.2.1(" Gate-face resistance ")	-	0	-
Clause No. 4.2.2(" Gate side-load resistance ")	-	0	-
Clause No. 4.3("Static strength ")	-	0	-
Clause No. 4.4(" Corrosion resistance ")	-	0	-
Clause No. 6.2(Marking)	-	0	-
Clause No. 6.3(Packaging)	-	0	-

-
Included w.e.f 28.07.2025

4408

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	2000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	Testing charges included in Clause No - 8.1.1
Clause No - 8.2(Addition)	-	0	Testing charges included in Clause No - 8.1.1
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1500	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1500	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	Testing charges included in Clause No - 15
Clause No -19.7(test is repeated with the capacitor short circuited)	-	6000	-
Clause No -19.11.4.1(electrostatic discharge)	-	5000	if applicable (The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be Rs. 55000 charged extra)
Clause No -19.11.4.2(radiated field)	-	20000	if applicable
Clause No -19.11.4.3(fast transient)	-	5000	if applicable
Clause No -19.11.4.4(Voltage dips and interruption)	-	5000	if applicable
Clause No -21.1(Mechanical strength)	-	3000	-
Clause No -22.1(construction)	-	0	Testing charges included in Clause No - 22
Clause No -22.11(push force applied)	-	0	Testing charges included in Clause No - 22
Clause No -24.1.2(safety isolating transformer)	-	0	Testing charges included in Clause No - 24
Clause No -24.1.3(for switches)	-	0	Testing charges included in Clause No - 24
Clause No -24.1.4(for automatic control)	-	0	Testing charges included in Clause No - 24
Clause No -24.1.5(for innterconnection couplers)	-	0	Testing charges included in Clause No - 24
Clause No -24.4(plug and socket)	-	0	Testing charges included in Clause No - 24
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	0	Testing charges included in Clause No - 25.8
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	2000	-
Clause No -29.3.3(dry heat test)	-	0	Testing charges included in Clause No - 29.2
Clause No -30.2.1(glow wire test)	-	3000	-
Clause No -30.101("incorporate combustible material")	-	0	Testing charges included in Clause No - 30.2.1
15(MOISTURE RESISTANCE)	-	4000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	10000	if applicable
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	if applicable
19.11.4.7(Harmonics)	-	5000	if applicable
22(CONSTRUCTION)	-	5000	-
24(COMPONENTS)	-	3000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
11(Heating)	-	4000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
22(CONSTRUCTION)	-	0	-
24(COMPONENTS)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
11(Heating)	-	0	-

20 Jun, 2028

-
Included w.e.f 28.07.2025 Exclusion: Cl 22.32 (Construction) Rubber parts oxygen bomb test, Cl 24 (Components) Components testing

4409

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

53500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	4000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	1000	-
11.8(Temperature rise)	-	4000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	1000	-
31(Resistance to Rusting)	-	2000	-
30.2(Needle Flame Test)	-	4000	-
30.2(Glow Wire Test)	-	4000	-
30.1(Ball pressure test)	-	4000	-
29(clearance, creepage distances and solid insulation)	-	3000	-
28(Screw test and connections)	-	8000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
26(Terminals for external conductors)	-	6000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	12000	-
24(Components)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	6000	-
22.1(Construction, IS 302-1)	-	9000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
19(Abnormal Operation)	-	6500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	3000	-
16.2(Leakage Current (after Clause 15))	-	3000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	6000	-
15.0(Moisture resistance)	-	10000	-
14(Transient Over Voltages)	-	7000	-
13.3(Electric Strength at operating temperature)	-	3000	-
13.2(Leakage current at operating temperature)	-	3000	-
13(Leakage current and electric strength at operating temperature)	-	6000	-
11.3(Heating)	-	5000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	3000	-
10.1(Power input)	-	3000	-
8.1.4(Protection against live parts against protective impedance)	-	3000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	5000	-
7(Marking and instructions)	-	2000	-
15.2(Moisture resistance)	-	4000	-
19.17(Abnormal Operation, IS 302-1)	-	3000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	4000	-
21.3(Mechanical Strength, IS 302-1)	-	3000	-
22.5(Construction)	-	3000	-
22.6(Construction, IS 302-1)	-	3000	-
22.11(Construction, IS 302-1)	-	3000	-
22.16(Construction)	-	3000	-
22.42(Construction)	-	3000	-
23.3(Internal Wiring, IS 302-1)	-	4000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	5000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
26.5(Terminals for external conductors)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28.1(Screws and connections)	-	3000	-
22.2(Construction, IS 302-1)	-	3000	-
22.3(Construction, IS 302-1)	-	3000	-
B.22.4(Construction, IS 302-1)	-	3000	-
B.22.5(Construction, IS 302-1)	-	3000	-
A.2(Earth continuity test)	-	3000	-
15.2(Spillage Test)	-	4000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-
12(Charging of metal-ion batteries)	-	4000	-
6(Classification- IS 302-1)	-	1000	-
5(General conditions for the tests)	-	1000	-
11.8(Temperature rise)	-	4000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
16(Leakage current and electric strength)	-	5000	-
4(General requirement)	-	1000	-
31(Resistance to Rusting)	-	2000	-
30.2(Needle Flame Test)	-	4000	-
30.2(Glow Wire Test)	-	4000	-
30.1(Ball pressure test)	-	4000	-
29(clearance, creepage distances and solid insulation)	-	3000	-
28(Screw test and connections)	-	8000	-
27.1(Provision for Earthing, IS 302-1)	-	3000	-
26(Terminals for external conductors)	-	6000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	12000	-
24(Components)	-	3000	-
23.1(Internal Wiring, IS 302-1)	-	6000	-
22.1(Construction, IS 302-1)	-	9000	-
21.1(Mechanical Strength, IS 302-1)	-	3000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
19(Abnormal Operation)	-	6500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	3000	-
16.2(Leakage Current (after Clause 15))	-	3000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	6000	-
15.0(Moisture resistance)	-	10000	-
14(Transient Over Voltages)	-	7000	-
13.3(Electric Strength at operating temperature)	-	3000	-
13.2(Leakage current at operating temperature)	-	3000	-
13(Leakage current and electric strength at operating temperature)	-	6000	-
11.3(Heating)	-	5000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	3000	-
10.1(Power input)	-	3000	-
8.1.4(Protection against live parts against protective impedance)	-	3000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	5000	-
7(Marking and instructions)	-	2000	-
15.2(Moisture resistance)	-	4000	-
19.17(Abnormal Operation, IS 302-1)	-	3000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
21.2(Mechanical Strength, IS 302-1)	-	4000	-
21.3(Mechanical Strength, IS 302-1)	-	3000	-
22.5(Construction)	-	3000	-
22.6(Construction, IS 302-1)	-	3000	-
22.11(Construction, IS 302-1)	-	3000	-
22.16(Construction)	-	3000	-
22.42(Construction)	-	3000	-
23.3(Internal Wiring, IS 302-1)	-	4000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	5000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
26.5(Terminals for external conductors)	-	3000	-
27.5(Provision for Earthing, IS 302-1)	-	3000	-
28.1(Screws and connections)	-	3000	-
22.2(Construction, IS 302-1)	-	3000	-
22.3(Construction, IS 302-1)	-	3000	-
B.22.4(Construction, IS 302-1)	-	3000	-
B.22.5(Construction, IS 302-1)	-	3000	-
A.2(Earth continuity test)	-	3000	-
15.2(Spillage Test)	-	4000	-
17(Over Load Protection of Transformers and associated circuits)	-	5000	-

18 Dec, 2027

-
Included w.e.f.21.08.2025 exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC Cl 22.32 (Construction) Annex C (Ageing test on motors) Annex D (Thermal motor protectors) Cl 22.16 (Construction) Cl 32 (Radiation Toxicity and Similar Hazards) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4410

Indian Institute of Packaging (IIP), Mumbai

7118404

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6315 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1650	-
4.6.2(TRANSPARANCY)	-	175	-
4.6.3(LEAKAGE TEST)	-	500	-
4.6.5(MIGRATION TEST)	-	1815	-
4.6.6(PORTABILITY TEST)	-	500	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	-
4.6.5.1 (chem)(Colour migration (Caps))	-	1815	-
4.6.5.1 (chem)(Colour migration (Container))	-	0	-
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	137	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	500	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	137	-
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	175	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	375	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	375	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	250	-
4.3(Workmanship, Finish & Appearance)	-	0	-
4.2(Design, Shape & Dimension )	-	0	-
4.1(Material)	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Middle))	-	0	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	0	-
Cl. 4.4 (a)(Capacity)	-	0	-
Cl. 4.3.2(Cl. 4.3.2 Finish & Appearance)	-	0	-
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	0	-
Cl. 4.6.5 (chem)(Cl. 4.6.5 Color migration (Caps))	-	0	-
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	0	-
Cl. 4.6.5(Cl. 4.6.5 Migration)	-	0	-
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	0	-
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	0	-
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	0	-
4.6.2.1, Annex-A(Transparency of container)	-	0	-
4.4 (b)(Brimful Capacity)	-	0	-
4.6.6.b (chem)(Water Potability Test (b) Taste)	-	0	-
4.6.6.a (chem)(Water Potability Test (a) Odour)	-	0	-
4.6.5 (chem)(c. Colour Migration (Cap))	-	0	-
4.6.5.1.b(Colour migration Test (Cap))	-	0	-
4.6.5.1.a(Colour migration Test (Container))	-	0	-
4.6.4 (chem)(Drop Test)	-	0	-
4.6.3 (chem)(c) Air pressure leakage test)	-	0	-
4.6.3 (chem)(b) Vibration leakage test)	-	0	-
4.6.3 (chem)(Leakage Test a) Closures leakage test)	-	0	-
4.6.2 (chem)(Transparency,)	-	0	-
4.5 (chem)((c) Wall Thickness, mm Bottom)	-	0	-
4.5 (chem)((b) Wall Thickness, mm Middle)	-	0	-
4.5 (chem)(a) Wall Thickness, mm Top)	-	0	-
4.4 (chem)(Brimful capacity)	-	0	-
4.3 (chem)(Workmanship, Finish & Appearance)	-	0	-
4.2 (chem)(a) Peelability)	-	0	-
4.2 (chem)(Design, Shape & Dimension)	-	0	-
4.1 (chem)(Workmanship and Finish)	-	0	-
Cl. 4.4 (a) (chem)(Capacity)	-	250	-
4.2(Design Shape & Dimentions)	-	0	-
4.3(Manufacture,Workmanship,Finish & appearance)	-	0	-
4.4(Capacity)	-	0	-
4.6.1(Environmental Stress-Crack Resistance)	-	0	-
5(Marking)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	0	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (i)(Barium)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ii)(Cobalt)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iii)(Copper)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv)(Iron)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (v)(Lithium)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi)(Manganese)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii)(Zinc)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (viii)(Antimony)	-	0	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	0	-
4.1(Material)	-	0	-
4.2(Design, Shape and Dimensions)	-	0	-
4.3(Workmanship and Finish)	-	0	-
4.4(Capacity)	-	0	-
4.5(Wall Thickness)	-	0	-
4.6.1(Environmental Stress-Crack Resistance)	-	0	-
4.6.2(Transparency)	-	0	-
4.6.3(Leakage Test)	-	0	-
4.6.4(Drop Test)	-	0	-
4.6.5(Migration Test)	-	0	-
4.6.6(Water potability Test)	-	0	-
5(Packing and Marking)	-	0	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix)(Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-	0	-
Cl. 4.1(Material test for container)	-	0	-
Cl. 4.6.5(Overall migration for container)	-	0	-
Cl. 4.6.5.1(Colour migration for container)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for container,Barium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for container,Cobalt)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for container,Copper)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for container,Iron)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for container,Lithium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for container,Manganese)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for container,Zinc)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for container,Antimony)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for container,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	0	-
Cl. 4.6.5(Overall migration for Cap)	-	0	-
Cl. 4.6.5.1(Colour migration for Cap)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for Cap,Barium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for Cap,Cobalt)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for Cap,Copper)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for Cap,Iron)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for Cap,Lithium)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for Cap,Manganese)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for Cap,Zinc)	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix)("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-	0	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for Cap,Antimony)	-	0	-
4.6.4(DROP TEST)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	-

30 Jun, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number