BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4351

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

all

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	700000	-
10.2(Accessibility test (MST 11))	-	700000	-
10.3(Cut susceptibility test (MST 12))	-	700000	-
10.4(Ground Continuity Test (MST 13))	-	700000	-
10.5(Impulse voltage test (MST 14))	-	700000	-
10.6(Dielectric withstand test (MST 16))	-	700000	-
10.7(Temperature test (MST 21))	-	700000	-
10.8(Fire test (MST 23))	-	700000	-
10.9(Reverse Current overload test (MST 26))	-	700000	-
10.10(Module breakage test (MST 32))	-	700000	-
11.1(Partial discharge-test (MST 15))	-	700000	-
11.2(Conduit Bending test (MST 33))	-	700000	-
11.3(Terminal box knockout tests (MST 44))	-	700000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	700000	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	700000	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	700000	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	700000	-
Cl.5, Table 7(UV resistance (MST 54))	-	700000	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	700000	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	700000	-
Cl.5, Table 7(Hot spot test (MST 22))	-	700000	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	700000	-
10.33 IS/IEC 61730-2(Dry heat conditioning MST 56)	-	700000	-
10.32 IS/IEC 61730-2(Cold conditioning MST 55)	-	700000	-
10.31 IS/IEC 61730-2(UV test MST 54)	-	700000	-
10.30 IS/IEC 61730-2(Damp heat test MST 53)	-	700000	-
10.29 IS/IEC 61730-2(Humidity-freeze test MST 52)	-	700000	-
10.28 IS/IEC 61730-2(Thermal cycling test MST 51)	-	700000	-
10.27 IS/IEC 61730-2(Robutness of terminations test MST 42)	-	700000	-
10.26 IS/IEC 61730-2(Materials creep test MST 37)	-	700000	-
10.25 IS/IEC 61730-2(Lap shear strength test MST 36)	-	700000	-
10.24 IS/IEC 61730-2(Peel test MST 35)	-	700000	-
10.23 IS/IEC 61730-2(Static Mechanical load test MST 34)	-	700000	-
10.22 IS/IEC 61730-2(Screw connections test MST 33)	-	700000	-
10.21 IS/IEC 61730-2(Module breakage test MST 32)	-	700000	-
10.20 IS/IEC 61730-2(Reverse current overload test MST 25)	-	700000	-
10.19 IS/IEC 61730-2(Bypass diode thermal test MST 25)	-	700000	-
10.18 IS/IEC 61730-2(Ignitability test MST 24)	-	700000	-
10.17 IS/IEC 61730-2(Fire test MST 23)	-	700000	-
10.16 IS/IEC 61730-2(Hot-spot endurance test MST 22)	-	700000	-
10.15 IS/IEC 61730-2(Temperature test MST 21)	-	700000	-
10.14 IS/IEC 61730-2(Wet leakage current test MST 17)	-	700000	-
10.13 IS/IEC 61730-2(Insulation test MST 16)	-	700000	-
10.12 IS/IEC 61730-2(Impulse voltage test MST 14)	-	700000	-
10.11 IS/IEC 61730-2(Continuity test of equipotential bonding MST 13)	-	700000	-
10.10 IS/IEC 61730-2(Cut susceptibility test MST 12)	-	700000	-
10.9 IS/IEC 61730-2(Accessibility test MST 11)	-	700000	-
10.8 IS/IEC 61730-2(Bypass diode functionality test MST 07)	-	700000	-
10.7 IS/IEC 61730-2(Sharp edge test MST 06)	-	700000	-
10.6 IS/IEC 61730-2(Durability of marking MST 05)	-	700000	-
10.5 IS/IEC 61730-2(Insulation thickness test MST 04)	-	700000	-
10.4 IS/IEC 61730-2(Maximum power determination MST 03)	-	700000	-
10.3 IS/IEC 61730-2(Performance at STC MST 02)	-	700000	-
10.2 IS/IEC 61730-2(Visual inspection MST01)	-	700000	-

25 Apr, 2028

-
Included w.e.f 20.06.2025

4352

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

all

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	200000	-
4(Construction requirements)	-	200000	-
5(Polymeric materials)	-	200000	-
6(Internal wiring and current-carrying parts)	-	200000	-
7(Connections)	-	200000	-
8(Bonding and grounding)	-	200000	-
9(Creepage and clearance distances)	-	200000	-
10(Field wiring compartments with covers)	-	200000	-
11(Marking)	-	200000	-
12()	-	200000	-

25 Apr, 2028

-
Included w.e.f 20.06.2025

4353

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

----

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	100	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	100	-
7.1.1(Maximum and minimum outside diameter of socket)	-	100	-
7.1.1 Table-2(Length of Socket end)	-	100	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	200	-
7.2(Minimum inside diameter of conduit)	-	200	-
7.3(Length of conduit)	-	100	-
7.4(Unifomity of The wall Thickness)	-	100	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	100	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	300	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	300	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	300	-
10(Resistance to Heat -Ball presure test)	-	300	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	500	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	500	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	-
10.0(Resistance to Heat -Ball presure test)	-	300	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	300	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	300	-
9.3(Compression Test at Full force applied (On load))	-	300	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	300	-
9.2(Bending Test At Room Temp)	-	300	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	100	-
7.4(Unifomity of The wall Thickness)	-	100	-
7.3(Length of conduit)	-	100	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	200	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	200	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	200	-
7.1.1 Table-2(Length of Socket end)	-	100	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	100	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	100	-
6.3(Standard Mark on Conduit)	-	100	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.1 - d(Marking)	-	100	-
6.1 - c(Marking)	-	100	-
6.1 - b(Marking)	-	100	-
6.1 - a(Marking)	-	100	-

03 Oct, 2027

-
Included w.e.f.17.07.2025 Exclusion 13 (Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)

4354

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 336 (2021)

Ether

all

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.2(Odour and Taste)	-	500	-
4.2.1(Ether, Anaesthetic)	-	500	-
4.4(Solubility)	-	500	-
4.5 Table 1 (i)(Relative density at 20°C/20°C)	-	500	-
4.5 Table 1 (ii)(Peroxides)	-	500	-
4.5 Table 1 (iii)(Distillation range)	-	1000	-
4.5 Table 1 (iv)(Residue on evaporation)	-	1000	-
4.5 Table 1 (v)(Methyl alcohol)	-	1000	-
4.5 Table 1 (vi)(Aldehyde and acetone)	-	1000	-
Ether(Sulphurous acid and other free acids)	-	1000	-
4.1(Description)	-	0	-
4.2(Odour and Taste)	-	0	-
4.2.1(Ether, Anaesthetic)	-	0	-
4.4(Solubility)	-	0	-
4.5 Table 1 (i)(Relative density at 20°C/20°C)	-	0	-
4.5 Table 1 (ii)(Peroxides)	-	0	-
4.5 Table 1 (iii)(Distillation range)	-	0	-
4.5 Table 1 (iv)(Residue on evaporation)	-	0	-
4.5 Table 1 (v)(Methyl alcohol)	-	0	-
4.5 Table 1 (vi)(Aldehyde and acetone)	-	0	-
Ether(Sulphurous acid and other free acids)	-	0	-

08 May, 2028

-
Included w.e.f 28.07.2025

4355

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra1500
4.1(Resistivity)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	10000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

-
Included w.e.f 22.07.2025 Exclusion: Cl 13.9 (elec) (Surface condition test), Cl 13.10 (elec) (Ultimate breaking load), Cl 13.11 (elec) (Stress-strain test), Cl 6.2 (zinc Purity), Cl 6.2 (It shall conform to and satisfy all the requirements of IS 209)

4356

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

All Grade / Type / Size / Designation

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Freedom from defects)	-	300	-
7.0(Dimension and Tolerances)	-	500	-
8.1 Table-1(Al)	-	1000	-
8.1 Table-1(Cu)	-	1000	-
8.1 Table-1(Mg)	-	1000	-
8.1 Table-1(Si)	-	1000	-
8.1 Table-1(Fe)	-	1000	-
8.1 Table-1(Mn)	-	1000	-
8.1 Table-1(Zn)	-	1000	-
8.1 Table-1(Ti)	-	1000	-
8.1 Table-1(Cr)	-	1000	-
9.3(Wrapping Test)	-	1000	-
10(Selection of Test Samples)	-	100	-
9.1(Tensile Strength)	-	1500	-
10(Selection of Test Samples)	-	0	-

-
Included w.e.f 04.08.2025

4357

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1,7.2,7.3 Table 1(Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Carbon)	-	0	-
7.1,7.2,7.3 Table 1(Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Sulphur)	-	0	-
7.1,7.2,7.3 Table 1(Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Phosphorus)	-	0	-
7.1,7.2,7.3 Table 1(Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Manganese)	-	0	-
7.1,7.2,7.3 Table 1(Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Silicon)	-	0	-
7.1,7.2,7.3 Table 1(Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Chromium)	-	0	-
7.1,7.2,7.3 Table 1(Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Nickel )	-	0	-
7.1,7.2,7.3 Table 1(Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Molybdenum)	-	0	-
7.1,7.2,7.3 Table 1(Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Titanium)	-	0	-
7.1,7.2,7.3 Table 1(Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Niobium)	-	0	-
7.3(Copper-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
7.1,7.2,7.3 Table 1(Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
7.1,7.2,7.3 Table 1(Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	1000	-
9(Hardness)	-	1000	-
10(Dimensional Tolerances)	-	500	-
6(Freedom from defects)	-	500	-
14(Marking)	-	0	-
14(Marking)	-	0	-
13(Corrosion Resistance- IS 10461(Part1))	-	4500	-
13(Corrosion Resistance- IS 10461(Part2))	-	2500	-

18 Dec, 2027

-
Included w.e.f 12.09.2025

4358

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

ALL

97500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	97500	-
5.1.1(General)	-	97500	-
5.1.2(Optical Faults-IS 14900)	-	97500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	97500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	97500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	97500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	97500	-
5.2.2.1( Dimensions- Width )	-	97500	-
5.2.2.1( Dimensions- Length)	-	97500	-
5.2.2.2( Squareness)	-	97500	-
5.2.3 (Fragmentation Test- IS 17004)	-	97500	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	97500	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	97500	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	97500	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	97500	-
5.2.4.1 (Other distortions)	-	97500	-
5.2.5.1( Resistance to shock- IS 17004)	-	97500	-
5.2.5.2( Resistance to human impact- IS 17004)	-	97500	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	97500	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	97500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	97500	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	97500	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	97500	-
5.3.2.1( Dimensions and squareness- Width )	-	97500	-
5.3.2.1( Dimensions and squareness- Length)	-	97500	-
5.3.2.1( Dimensions and squareness-Squareness)	-	97500	-
5.3.2.2 (Edge displacement)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.4( Boil and Bake Tests-IS 17004)	-	97500	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	97500	-
5.3.6.1( Spot defects in the central area)	-	97500	-
5.3.6.2 (Linear defects in the central area)	-	97500	-
5.3.6.3( Defects in the outer area for framed edges)	-	97500	-
5.3.6.4( Vents)	-	97500	-
5.3.6.5( Creases and streaks)	-	97500	-
5.3.6.6( Defects on edge which will not be framed)	-	97500	-
5.3.7( Humidity Test – Optional)	-	97500	-
5.3.8( Resistance to Human Impact Test)	-	97500	-
4(Types)	-	97500	-
5.1.1(General)	-	97500	-
5.1.2(Optical Faults-IS 14900)	-	97500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	97500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	97500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	97500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	97500	-
5.2.2.1( Dimensions- Width )	-	97500	-
5.2.2.1( Dimensions- Length)	-	97500	-
5.2.2.2( Squareness)	-	97500	-
5.2.3 (Fragmentation Test- IS 17004)	-	97500	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	97500	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	97500	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	97500	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	97500	-
5.2.4.1 (Other distortions)	-	97500	-
5.2.5.1( Resistance to shock- IS 17004)	-	97500	-
5.2.5.2( Resistance to human impact- IS 17004)	-	97500	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	97500	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	97500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	97500	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	97500	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	97500	-
5.3.2.1( Dimensions and squareness- Width )	-	97500	-
5.3.2.1( Dimensions and squareness- Length)	-	97500	-
5.3.2.1( Dimensions and squareness-Squareness)	-	97500	-
5.3.2.2 (Edge displacement)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.4( Boil and Bake Tests-IS 17004)	-	97500	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	97500	-
5.3.6.1( Spot defects in the central area)	-	97500	-
5.3.6.2 (Linear defects in the central area)	-	97500	-
5.3.6.3( Defects in the outer area for framed edges)	-	97500	-
5.3.6.4( Vents)	-	97500	-
5.3.6.5( Creases and streaks)	-	97500	-
5.3.6.6( Defects on edge which will not be framed)	-	97500	-
5.3.7( Humidity Test – Optional)	-	97500	-
5.3.8( Resistance to Human Impact Test)	-	97500	-
5.2.1(Thickness)	-	97500	-
5.2.2(Dimension and Squarenes)	-	97500	-
5.2.4(Overall Bow)	-	97500	-
5.2.4(Measurement of wave and roller wave)	-	97500	-
5.2.4(Edge lift)	-	97500	-
5.2.4(Local distortion)	-	97500	-
5.2.3(Fragmentation test)	-	97500	-
5.2.7(Four point bending)	-	97500	-
5.2.6(Surface compression)	-	97500	-
5.2.5.1(Resistance to shock)	-	97500	-
5.2.5.2(Resistance to human impact)	-	97500	-
5.3.1(Thickness test)	-	97500	-
5.3.2.1(Dimension and Squarenes test)	-	97500	-
5.3.6(Defects in central area test)	-	97500	-
5.3.6.7(Defects in central area test)	-	97500	-
5.3.5(Fracture and adhesion)	-	97500	-
5.3.8(Resistance to human impact)	-	97500	-
5.3.4(Boil test)	-	97500	-
5.3.4(Bake test)	-	97500	-
5.3.7(Humidity test with condensation)	-	97500	-
5.3.7(Humidity test without condensation)	-	97500	-
5.3.3(Light stability test)	-	97500	-
5.3.2.2(Edge displacement test)	-	97500	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	97500	-
5.2.4(measurement of wave and roller wave)	-	97500	-
5.2.8(Fabrication in Glass)	-	97500	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	97500	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	97500	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	97500	-
As per Clause 5.3.9(Laminated Glass)	-	97500	-
As per Clause 5.2.8.2(Toughened)	-	97500	-
As per Clause 5.2.8.4(Toughened)	-	97500	-
As per Clause 5.2.9(Toughened)	-	97500	-
As per Clause 5.3.6.4(Laminated Glass)	-	97500	-
As per Clause 5.3.6.5(Laminated Glass)	-	97500	-
As per Clause 5.3.6.6(Laminated Glass)	-	97500	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	97500	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	97500	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	97500	-
As per Clause 5.7.1(Flexible Plastic)	-	97500	-
As per Clause 3.7(Wind screen and Panes)	-	97500	-
As per Clause 4.1(Wind screen and Panes)	-	97500	-
4(Types)	-	97500	-
5.1.1(General)	-	97500	-
5.1.2(Optical Faults-IS 14900)	-	97500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	97500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	97500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	97500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	97500	-
5.2.2.1( Dimensions- Width )	-	97500	-
5.2.2.1( Dimensions- Length)	-	97500	-
5.2.2.2( Squareness)	-	97500	-
5.2.3 (Fragmentation Test- IS 17004)	-	97500	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	97500	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	97500	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	97500	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	97500	-
5.2.4.1 (Other distortions)	-	97500	-
5.2.5.1( Resistance to shock- IS 17004)	-	97500	-
5.2.5.2( Resistance to human impact- IS 17004)	-	97500	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	97500	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	97500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	97500	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	97500	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	97500	-
5.3.2.1( Dimensions and squareness- Width )	-	97500	-
5.3.2.1( Dimensions and squareness- Length)	-	97500	-
5.3.2.1( Dimensions and squareness-Squareness)	-	97500	-
5.3.2.2 (Edge displacement)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.4( Boil and Bake Tests-IS 17004)	-	97500	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	97500	-
5.3.6.1( Spot defects in the central area)	-	97500	-
5.3.6.2 (Linear defects in the central area)	-	97500	-
5.3.6.3( Defects in the outer area for framed edges)	-	97500	-
5.3.6.4( Vents)	-	97500	-
5.3.6.5( Creases and streaks)	-	97500	-
5.3.6.6( Defects on edge which will not be framed)	-	97500	-
5.3.7( Humidity Test – Optional)	-	97500	-
5.3.8( Resistance to Human Impact Test)	-	97500	-
4(Types)	-	97500	-
5.1.1(General)	-	97500	-
5.1.2(Optical Faults-IS 14900)	-	97500	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	97500	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	97500	-
5.1.2(Linear / Extended Faults -IS 14900)	-	97500	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	97500	-
5.2.2.1( Dimensions- Width )	-	97500	-
5.2.2.1( Dimensions- Length)	-	97500	-
5.2.2.2( Squareness)	-	97500	-
5.2.3 (Fragmentation Test- IS 17004)	-	97500	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	97500	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	97500	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	97500	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	97500	-
5.2.4.1 (Other distortions)	-	97500	-
5.2.5.1( Resistance to shock- IS 17004)	-	97500	-
5.2.5.2( Resistance to human impact- IS 17004)	-	97500	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	97500	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	97500	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	97500	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	97500	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	97500	-
5.3.2.1( Dimensions and squareness- Width )	-	97500	-
5.3.2.1( Dimensions and squareness- Length)	-	97500	-
5.3.2.1( Dimensions and squareness-Squareness)	-	97500	-
5.3.2.2 (Edge displacement)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.3( Light Stability Test-IS 17004)	-	97500	-
5.3.4( Boil and Bake Tests-IS 17004)	-	97500	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	97500	-
5.3.6.1( Spot defects in the central area)	-	97500	-
5.3.6.2 (Linear defects in the central area)	-	97500	-
5.3.6.3( Defects in the outer area for framed edges)	-	97500	-
5.3.6.4( Vents)	-	97500	-
5.3.6.5( Creases and streaks)	-	97500	-
5.3.6.6( Defects on edge which will not be framed)	-	97500	-
5.3.7( Humidity Test – Optional)	-	97500	-
5.3.8( Resistance to Human Impact Test)	-	97500	-
5.2.1(Thickness)	-	97500	-
5.2.2(Dimension and Squarenes)	-	97500	-
5.2.4(Overall Bow)	-	97500	-
5.2.4(Measurement of wave and roller wave)	-	97500	-
5.2.4(Edge lift)	-	97500	-
5.2.4(Local distortion)	-	97500	-
5.2.3(Fragmentation test)	-	97500	-
5.2.7(Four point bending)	-	97500	-
5.2.6(Surface compression)	-	97500	-
5.2.5.1(Resistance to shock)	-	97500	-
5.2.5.2(Resistance to human impact)	-	97500	-
5.3.1(Thickness test)	-	97500	-
5.3.2.1(Dimension and Squarenes test)	-	97500	-
5.3.6(Defects in central area test)	-	97500	-
5.3.6.7(Defects in central area test)	-	97500	-
5.3.5(Fracture and adhesion)	-	97500	-
5.3.8(Resistance to human impact)	-	97500	-
5.3.4(Boil test)	-	97500	-
5.3.4(Bake test)	-	97500	-
5.3.7(Humidity test with condensation)	-	97500	-
5.3.7(Humidity test without condensation)	-	97500	-
5.3.3(Light stability test)	-	97500	-
5.3.2.2(Edge displacement test)	-	97500	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	97500	-
5.2.4(measurement of wave and roller wave)	-	97500	-
5.2.8(Fabrication in Glass)	-	97500	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	97500	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	97500	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	97500	-
As per Clause 5.3.9(Laminated Glass)	-	97500	-
As per Clause 5.2.8.2(Toughened)	-	97500	-
As per Clause 5.2.8.4(Toughened)	-	97500	-
As per Clause 5.2.9(Toughened)	-	97500	-
As per Clause 5.3.6.4(Laminated Glass)	-	97500	-
As per Clause 5.3.6.5(Laminated Glass)	-	97500	-
As per Clause 5.3.6.6(Laminated Glass)	-	97500	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	97500	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	97500	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	97500	-
As per Clause 5.7.1(Flexible Plastic)	-	97500	-
As per Clause 3.7(Wind screen and Panes)	-	97500	-
As per Clause 4.1(Wind screen and Panes)	-	97500	-

08 May, 2028

-
Included w.e.f.12.09.2025

4359

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS/ISO 22702 (2018)

Utility lighters Safety specifications First Revision

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Flame generation)	-	1000	-
4.2(Flame heights)	-	1000	-
4.3(Flame- height adjustment)	-	1000	-
4.4("Resistance to Spitting or Sputtering and flaring")	-	1500	-
4.6(Volumetric Displacement)	-	1500	-
5.2(Resistance to dropping)	-	2000	-
5.3(Resistance to elevated temperature)	-	2500	-
5.4(Burning behavior)	-	2000	-
5.5(Resistance to continuous burn)	-	2000	-
5.6(Resistance to cyclic burn)	-	2000	-
5.7(External Finish)	-	1000	-
5.8(Compatibility with fuel)	-	3000	-
5.9(Resistance to internal pressure)	-	2000	-
6(Refilling Test)	-	500	-
4.5(Flame extinction)	-	1500	-

-
Included w.e.f.28.07.2025

4360

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Freedom from defects)	-	2000	For dimensional and other qualitative test
7.0(Dimension and Tolerances)	-	2000	For dimensional and other qualitative test
8.1 Table-1(Al)	-	5000	For chemical test
8.1 Table-1(Cu)	-	5000	For chemical test
8.1 Table-1(Mg)	-	5000	For chemical test
8.1 Table-1(Si)	-	5000	For chemical test
8.1 Table-1(Fe)	-	5000	For chemical test
8.1 Table-1(Mn)	-	5000	For chemical test
8.1 Table-1(Zn)	-	5000	For chemical test
8.1 Table-1(Ti)	-	5000	For chemical test
8.1 Table-1(Cr)	-	5000	For chemical test
9.1(Tensile Strength)	-	5000	For mechanical test
9.3(Wrapping Test)	-	2000	For dimensional and other qualitative test
10(Selection of Test Samples)	-	2000	For dimensional and other qualitative test

-
Included w.e.f 20.06.2025

4361

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17266 (2019)

Textiles – Viscose staple fibres – Specification

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7(None)	-	40000	-
4.5(Commercial Mass)	-	40000	-
3.1(Oil Pickup Unit)	-	40000	-
3.2(Abnormal Fibre and Other Matters)	-	40000	-
4/4.1 Table 1.( REQUIREMENTS)	-	40000	-
4.3(Freedom from Defects)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-
4.3.2 (Damaged/Bumped Fibres)	-	40000	-
4.3.3(Finish Oil Contamination)	-	40000	-
4.3.4(Texture Colour/Appearance)	-	40000	-
4.3.5(Fluorescent Oil)	-	40000	-
4.3.6(Slubs/Loops/Kinks)	-	40000	-
4.3.7()	-	40000	-
Cl-4.2, Table-1 (i)(Denier (1.2), Max)	-	40000	-
Cl-4.2, Table-1 (ii)(Conditional tenacity, gpd Min)	-	40000	-
Cl-4.2, Table-1 (iii)(Whiteness (berger), percent, Min)	-	40000	-
Cl-4.2, Table-1 (iv)(Length, mm)	-	40000	-
Cl-4.2, Table-1 (vi)(Spinning faults, (> 19 mm) Max)	-	40000	-
Cl-4.2, Table-1 (vi)(Shirley faults, mg/kg, Max)	-	40000	-
Cl-4.2, Table-1 (vii)(Moisture, percent)	-	40000	-
Cl-4.2, Table-1 (viii)(Oil pickup, percent)	-	40000	-
Cl-4.2, Table-1 (ix)(pH)	-	40000	-
4.3.1( Dirt/Grease)	-	40000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion: Table 2 Additional Requirements for ECO-Mark (Optional)

4362

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18471 : Part 3 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	7500	For dimensional and other qualitative test
Clause. 3.0(Thread size.)	-	7500	For dimensional and other qualitative test
Clause. 3.0(Length)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Material)	-	5000	For chemical test
Clause. 4.0(Thread)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Cross recesses)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Tolerances)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Mechnical and functional properties.)	-	5000	For mechanical test
Clause. 4.0(Finish)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Acceptability)	-	7500	For dimensional and other qualitative test
Clause.5.0(Designation)	-	7500	For dimensional and other qualitative test
Clause.5.0(Marking)	-	7500	For dimensional and other qualitative test

-
Included w.e.f 20.06.2025

4363

Sleen India Biz venture Private Limited, Agra

9139736

IS 12029 (2023)

Acid Oil - Specification (first revision of IS 12029)

Industrial Fine chemical-Acid Oil

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Iodine Value)	-	800	-
4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018)	-	2000	-
4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018)	-	2000	-
4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021)	-	2000	-
4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023)	-	1000	-
4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	1000	-
4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023)	-	2000	-
4.2 Table 1 (vii)(Iron - IS 12029:2023)	-	2000	-
4.2 Table 1 (viii)(Ash - IS 12029:2023)	-	1000	-
4.1(Iodine Value)	-	0	-
4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018)	-	0	-
4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018)	-	0	-
4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021)	-	0	-
4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023)	-	0	-
4.2 Table 1 (vii)(Iron - IS 12029:2023)	-	0	-
4.2 Table 1 (viii)(Ash - IS 12029:2023)	-	0	-

-
Included w.e.f 30.06.2025

4364

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18471 : Part 2 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	7500	For complete dimensional and other qualitative test
Clause. 3.0(Thread size.)	-	7500	For complete dimensional and other qualitative test
Clause. 3.0(Length)	-	7500	For complete dimensional and other qualitative test
Clause. 4.0(Material)	-	5000	For chemical test
Clause. 4.0(Thread)	-	7500	For complete dimensional and other qualitative test
Clause. 4.0(Cross recesses)	-	7500	For complete dimensional and other qualitative test
Clause. 4.0(Mechnical and functional properties.)	-	5000	For mechanical test
Clause. 4.0(Finish)	-	7500	For complete dimensional and other qualitative test
Clause. 4.0(Acceptability)	-	7500	For complete dimensional and other qualitative test
Clause.5.0(Designation)	-	7500	For complete dimensional and other qualitative test
Clause.5.0(Marking)	-	7500	For complete dimensional and other qualitative test

-
Included w.e.f 20.06.2025

4365

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

26100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	800	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	550	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	250	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	550	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	350	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	550	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	550	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	550	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	550	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	2100	-
Cl-5.7, Table-2 (i)(Consistency)	-	350	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	350	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	550	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	550	-
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	350	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	350	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	350	-
Cl-5.1.1 (c)(Suitable extenders)	-	350	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	200	-
Cl-5.5(Lead Restriction)	-	200	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	350	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	350	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	350	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	200	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	200	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	300	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2200	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	5000	-
Cl-5.7, Table-2 (i)(Consistency)	-	300	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	300	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	300	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	300	-
Cl-5.1 (a)(Pigment)	-	300	-
Cl-5.1 (b)(Driers)	-	300	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	300	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	300	-
Cl-5.1.1 (c)(Suitable extenders)	-	300	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	200	-
Cl-5.5(Lead Restriction)	-	200	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	200	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	200	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	200	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	300	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	200	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	200	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	300	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	300	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	300	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	200	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	300	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	200	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2200	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	5005	-
Cl-5.7, Table-2 (i)(Consistency)	-	300	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	300	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	300	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	300	-
Cl-5.1 (a)(Pigment)	-	300	-
Cl-5.1 (b)(Driers)	-	300	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	800	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	550	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	250	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	550	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	350	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	550	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	550	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	550	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	550	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	2100	-
Cl-5.7, Table-2 (i)(Consistency)	-	350	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	350	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	550	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	550	-
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	350	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	300	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	300	-
Cl-5.1.1 (c)(Suitable extenders)	-	300	-
Cl-5.1.2(volatile vehicle)	-	300	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	300	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	200	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	300	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	300	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	300	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	200	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	300	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	200	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	200	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	300	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	200	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	300	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	300	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	5000	-
Cl-5.7, Table-2 (i)(Consistency)	-	200	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	300	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	300	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	300	-
Cl-5.1 (a)(Pigment)	-	300	-
Cl-5.1 (b)(Driers)	-	200	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	Duplicate
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	200	Duplicate
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	200	Duplicate
Cl-5.1.1 (c)(Suitable extenders)	-	200	Duplicate
Cl-5.1.2(volatile vehicle)	-	200	Duplicate
Cl-5.3(Compatibility with Thinner)	-	200	Duplicate
Cl-5.5(Lead Restriction)	-	200	Duplicate
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	200	Duplicate
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	Duplicate
Cl-5.7, Table-2 (i)(Consistency)	-	0	Duplicate
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	Duplicate
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	Duplicate
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	Duplicate
Cl-5.1 (a)(Pigment)	-	0	Duplicate
Cl-5.1 (b)(Driers)	-	0	Duplicate
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Duplicate
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	Duplicate
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	Duplicate
Cl-5.1.1 (c)(Suitable extenders)	-	0	Duplicate
Cl-5.1.2(volatile vehicle)	-	0	Duplicate
Cl-5.3(Compatibility with Thinner)	-	0	Duplicate
Cl-5.5(Lead Restriction)	-	0	Duplicate
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	Duplicate
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	Duplicate
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	Duplicate
Cl-5.7, Table-2 (i)(Consistency)	-	0	Duplicate
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	Duplicate
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	Duplicate
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	Duplicate
Cl-5.1 (a)(Pigment)	-	0	Duplicate
Cl-5.1 (b)(Driers)	-	0	Duplicate
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	200	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	200	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	200	-
Cl-5.5(Lead Restriction)	-	200	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	200	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	300	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	300	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	300	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	200	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	200	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	200	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	300	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	300	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	300	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	300	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	300	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	500	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	500	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	5000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	5000	-
Cl-5.7, Table-2 (i)(Consistency)	-	200	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	200	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	300	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	300	-
Cl-5.1 (a)(Pigment)	-	200	-
Cl-5.1 (b)(Driers)	-	200	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	800	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	550	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	250	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	550	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	350	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	550	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	550	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	550	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	550	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	2100	-
Cl-5.7, Table-2 (i)(Consistency)	-	350	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	350	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	550	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	550	-
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	350	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	800	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	550	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	250	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	550	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	350	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	550	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	550	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	550	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	550	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	2100	-
Cl-5.7, Table-2 (i)(Consistency)	-	350	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	350	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	550	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	550	-
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	350	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	800	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	200	-
Cl-5.1.2(volatile vehicle)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	300	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	350	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	250	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	350	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	350	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	250	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	550	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	350	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	350	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	350	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	550	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	550	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2200	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	2200	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	550	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	550	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	2100	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	2100	-
Cl-5.7, Table-2 (i)(Consistency)	-	350	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	350	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	550	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	550	-
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	350	-

04 Jan, 2027

-
Included w.e.f 06.08.2025 Exclusion: Cl 5.2 Material, Cl 5.4 Freedom from objectionable impurities

4366

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

ALL

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	600	-
5.2(Marking)	-	0	-
Cl-3.2(Relative Density of Caustic Soda Lye)	-	600	-
Cl-3.2(Relative Density of Caustic Soda Lye)	-	600	-

08 May, 2028

-
Included w.e.f. 31.07.2025

4367

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

SHOES – SPECIFICATION, PART 2 SHOES FOR GENERAL PURPOSE

39999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	150	-
Cl-5.3(Material)	-	500	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	800	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	800	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	800	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	800	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	1000	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	30000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	1000	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	800	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	800	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	1000	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	1200	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	800	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	1000	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	800	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	800	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	800	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	1000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	1200	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1000	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	1000	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	800	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1000	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	800	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	800	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	1200	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	250	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1000	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	800	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	1000	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	800	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	500	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	800	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	1000	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	500	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	500	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1000	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	800	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	1000	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	800	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	800	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	800	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	800	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	800	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	800	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	1000	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	800	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	1000	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	800	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	800	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	800	-
Cl-8.1(Marking)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	800	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	800	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	800	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	800	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	800	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	800	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	1000	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Shoes: Shoes for General Purpose(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.1.4.1 of IS 17011(DMFU)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(pH)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	0	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	0	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	0	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	0	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o- aminoazotoluene)	-	0	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	0	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	0	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	0	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	0	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	0	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	0	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	0	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	0	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	0	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	0	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	0	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	0	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	0	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	0	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	0	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	0	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	0	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	0	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	0	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	0	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	0	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	0	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	0	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	0	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	0	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	0	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	0	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	0	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	0	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	0	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	0	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	0	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	0	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	0	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	0	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	0	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	0	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	0	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	0	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	0	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-

23 Feb, 2029

-
Included w.e.f. 30.07.2025 Exclusion: "Cl-6.1.2, Table-3 (i) (Colour fastness to light, Marring, Min) Cl-6.1.4, Table-5 (i) (Colour fastness to light, Marring, Min)"

4368

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18471 : Part 1 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	7500	For dimensional and other qualitative test
Clause. 3.0(Dimenssions.)	-	7500	For dimensional and other qualitative test
Clause. 3.0(Thread size.)	-	7500	For dimensional and other qualitative test
Clause. 3.0(Length)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Material)	-	5000	For chemical testing
Clause. 4.0(Thread)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Cross recesses)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Mechnical and functional properties.)	-	5000	For mechanical tests
Clause. 4.0(Finish)	-	7500	For dimensional and other qualitative test
Clause. 4.0(Acceptability)	-	7500	For dimensional and other qualitative test
Clause.5.0(Designation)	-	7500	For dimensional and other qualitative test
Clause.5.0(Marking)	-	7500	For dimensional and other qualitative test

-
Included w.e.f 20.06.2025

4369

EMC Testing and Compliance LLP, Gurugram

8141526

IS 3566 (2023)

TEXTILES - VISCOSE RAYON CUT STAPLE SPUN YARN - SPECIFICATION (SECOND REVISION)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	40000	-
5.1 Table 1 (i)(Count, Ne)	-	40000	-
5.1 Table 1 (ii)(Count CV, percent, Max)	-	40000	-
5.1 Table 1 (iii)(CSP, Min)	-	40000	-
5.1 Table 1 (iv)(Lea breaking load CV, Percent, Max)	-	40000	-
5.1Tble 1 (v)(Yarn tenacity, cN/tex, Min)	-	40000	-
5.1 Table 1 (vi)(Breaking elongation, percent, Min)	-	40000	-
5.1 Table 1 (vii)(Yarn tenacity CV percent, Max)	-	40000	-
5.1Table 1 (viii)(Unevenness, percent Max)	-	40000	-
5.1 Table 1 (ix)(Unevenness CV, percent, Max)	-	40000	-
5.1 Table 1 (x)(Hairiness index, Max)	-	40000	-
5.1 Table 1 (xi)(Imperfections/km, Max)	-	40000	-
5.2 Table 2 (i)(Count, Ne)	-	40000	-
5.2 Table 2 (ii)(Count CV, percent, Max)	-	40000	-
5.2 Table 2 (iii)(Twist per meter)	-	40000	-
5.2 Table 2 (iv)(CSP, Min)	-	40000	-
5.2 Table 2 (v)(Lea breaking load CV, Percent, Max)	-	40000	-
5.2 Table 2 (vi)(Yarn tenacity, cN/tex, Min)	-	40000	-
5.2 Table 2(vii)(Yarn tenacity CV, percent, Max)	-	40000	-
5.2 Table 2 (viii)(Breaking elongation percent, Min)	-	40000	-
5.2 Table 2 (ix)(Unevenness, percent Max)	-	40000	-
5.2 Table 2 (x)(Unevenness CV, percent, Max)	-	40000	-
5.2 Table 2 (xi)(Hairiness index, Max)	-	40000	-
5.2 Table 2(xii)(Imperfections/km, Max)	-	40000	-
5.3.2(The average resultant count of the multifold yarn)	-	40000	-
5.3.3(The lea breaking strength of multifold yarn)	-	40000	-
5.3.4(The ply twist in the multifold yarn)	-	40000	-
5.3.6(The requirement for hairiness index)	-	40000	-
7(MARKING)	-	40000	-
Cl-5.3, Table-1 (i) (Amendment No.1)(Count, Ne)	-	40000	-
Cl-5.3, Table-1 (ii) (Amendment No.1)(Count CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (iii) (Amendment No.1)(CSP, Min)	-	40000	-
Cl-5.3, Table-1 (iv) (Amendment No.1)(Lea breaking load CV, Percent, Max)	-	40000	-
Cl-5.3, Table-1 (v) (Amendment No.1)(Yarn tenacity, cN/tex, Min)	-	40000	-
Cl-5.3, Table-1 (vi) (Amendment No.1)(Yarn tenacity CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (vii) (Amendment No.1)(Breaking elongation, percent, Min)	-	40000	-
Cl-5.3, Table-1 (viii) (Amendment No.1)(Unevenness, percent, Max)	-	40000	-
Cl-5.3, Table-1 (ix) (Amendment No.1)(Unevenness CV, percent, Max)	-	40000	-
Cl-5.3, Table-1 (x) (Amendment No.1)(Hairiness index, Max)	-	40000	-
Cl-5.3, Table-1 (xi) (Amendment No.1)(Imperfections/km, Max)	-	40000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025

4370

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18476 (2023)

Fasteners ï¿½ Hexagon Washer Head Drilling Screws with Tapping Screw Thread

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	7200	For complete dimensional and other qualitative testing
Clause. 4.0(Thread size.)	-	7200	For complete dimensional and other qualitative testing
Clause. 4.0(Length)	-	7200	For complete dimensional and other qualitative testing
Clause. 5.0(Material)	-	5000	For complete chemical testing
Clause. 5.0(Thread)	-	7200	For complete dimensional and other qualitative testing
Clause. 5.0(Tolerances)	-	7200	For complete dimensional and other qualitative testing
Clause. 5.0(Mechnical and functional properties.)	-	5000	For mechanical testing
Clause. 5.0(Finish)	-	7200	For complete dimensional and other qualitative testing
Clause. 5.0(Acceptability)	-	7200.02	For complete dimensional and other qualitative testing
Clause.6.0(Designation)	-	7200.03	For complete dimensional and other qualitative testing
Clause.6.0(Marking)	-	7200	For complete dimensional and other qualitative testing

-
Included w.e.f.19.06.2025

4371

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

all

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	0	-
Cl No 3.2(Miscibility with Water)	-	500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	500	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	500	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	500	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	500	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	500	-
3.1(Description)	-	0	-
3.2(Miscibility with Water)	-	0	-
4.1(Packing)	-	0	-
4.2(Marking)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 1(Purity %, Annex A)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 2(Colour, Pt-Co scale, IS 8768)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 3(Relative density, 6 of IS 82)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 4(Distillation range, IS 1448-Part 18)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 5(Water content, %, IS 2362)	-	400	-
3.3 & 6.1 - Table -1, Sl no. 6(Residue on evaporation, mg/ 100 ml, 8 of IS 82)	-	400	-
3.3 & 6.1 - Table -1, Sl no. 7(Acidity, g/100 ml, Annex C)	-	400	-
3.3 & 6.1 - Table -1, Sl no. 8(Alkalinity, Annex D)	-	400	-
3.3 & 6.1 - Table -1, Sl no. 9(Permanganate test, minutes, Annex E)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 10(Alcoholic impurities, Annex F)	-	100	-
3.3 & 6.1 - Table -1, Sl no. 11(Benzene content mg/kg, Annex A)	-	100	-
3.3 & 6.1 - Table -1, Sl no. 12(Methanol content mg/kg, Annex A)	-	100	-
Cl No 3.1( Description)	-	0	-
Cl No 3.2(Miscibility with Water)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	0	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	0	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	0	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	0	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	0	-
3.1(Description)	-	0	-
3.2(Miscibility with Water)	-	0	-
4.1(Packing)	-	0	-
4.2(Marking)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 1(Purity %, Annex A)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 2(Colour, Pt-Co scale, IS 8768)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 3(Relative density, 6 of IS 82)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 4(Distillation range, IS 1448-Part 18)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 5(Water content, %, IS 2362)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 6(Residue on evaporation, mg/ 100 ml, 8 of IS 82)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 7(Acidity, g/100 ml, Annex C)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 8(Alkalinity, Annex D)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 9(Permanganate test, minutes, Annex E)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 10(Alcoholic impurities, Annex F)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 11(Benzene content mg/kg, Annex A)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 12(Methanol content mg/kg, Annex A)	-	0	-
Cl No 3.1( Description)	-	0	-
Cl No 3.2(Miscibility with Water)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	0	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	0	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	0	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	0	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	0	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	0	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	0	-
3.1(Description)	-	0	-
3.2(Miscibility with Water)	-	0	-
4.1(Packing)	-	0	-
4.2(Marking)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 1(Purity %, Annex A)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 2(Colour, Pt-Co scale, IS 8768)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 3(Relative density, 6 of IS 82)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 4(Distillation range, IS 1448-Part 18)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 5(Water content, %, IS 2362)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 6(Residue on evaporation, mg/ 100 ml, 8 of IS 82)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 7(Acidity, g/100 ml, Annex C)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 8(Alkalinity, Annex D)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 9(Permanganate test, minutes, Annex E)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 10(Alcoholic impurities, Annex F)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 11(Benzene content mg/kg, Annex A)	-	0	-
3.3 & 6.1 - Table -1, Sl no. 12(Methanol content mg/kg, Annex A)	-	0	-

08 May, 2028

-
Included w.e.f. 27.01.2026

4372

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

62600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1 (i.)(Impact penetration)	-	2000	.
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	2000	.
7.1 Table 1 (iii.)(Blood resistance)	-	6000	.
7.1 Table 1 (iv.)(Viral resistance)	-	15000	.
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	2000	.
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	2000	.
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	15000	.
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	15000	.
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	0	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	0	-
Cl-5.1, Table-2 (vii)(Cleanliness — Microbial (CFU/100 cm2 ))	-	0	-

20 Feb, 2028

-
-

4373

Switchgear Testing Laboratories, Schneider Electric India Private Limited, Ahmednagar

7184626

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

2514000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	-
4(Classification)	-	0	-
5.3.2(Rated voltages)	-	2000	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	2000	-
5.3.2.3(Rated impulse withstand voltage)	-	2000	-
5.3.3(Currents)	-	2000	-
5.3.3.2(Conventional free air thermal current)	-	2000	-
5.3.3.3(Conventional enclosed thermal current)	-	2000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	-
5.3.3.5(Rated uninterrupted current)	-	2000	-
5.3.4(Rated frequency)	-	2000	-
5.3.5(Rated duty)	-	2000	-
5.3.5.2(Eight-hour duty)	-	2000	-
5.3.5.3(Uninterrupted duty)	-	2000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	-
5.3.6.2(Rated making capacity)	-	2000	-
5.3.6.3(Rated breaking capacity)	-	2000	-
5.3.7(Short-circuit characteristics)	-	2000	-
5.3.7.1(Rated short-time withstand current)	-	2000	-
5.3.7.2(Rated short-circuit making capacity)	-	2000	-
5.3.7.4(Rated conditional short-circuit current)	-	2000	-
5.4(Utilization category)	-	2000	-
5.5(Control circuits)	-	2000	-
5.6(Auxiliary circuits)	-	2000	-
5.7(Relays and releases)	-	2000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	-
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.1.5Special tests(Special tests)	-	140000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.4.2(Temperature-rise)	-	15000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.8.2(Overload test)	-	50000	-
9.3.9.2(Determination of critical load current)	-	45000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.11(Climatic test)	-	50000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.3(Electromagnetic compatibility tests)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	15000	-
9.3.4.8(Strength of actuator mechanism)	-	25000	-
9.3.5.3(Dielectric verification)	-	25000	-
9.3.5.5(Temperature-rise verification)	-	15000	-
9.3.6.4(Dielectric verification)	-	25000	-
9.3.6.6(Temperature-rise verification)	-	15000	-
9.3.7.4(Dielectric verification)	-	25000	-
9.3.7.6(Temperature-rise verification)	-	15000	-
9.3.8.3(Dielectric verification)	-	25000	-
9.3.8.5(Temperature-rise verification)	-	15000	-
9.3.9.3(Critical load current performance)	-	45000	-
9.3.5.4(Leakage current)	-	10000	-
9.3.6.5(Leakage current)	-	10000	-
9.3.7.5(Leakage current)	-	10000	-
9.3.8.4(Leakage current)	-	10000	-
8.3.2(Immunity)	-	20000	-
8.3.3(Emission)	-	20000	-
3.1(General)	-	0	-
4(Classification)	-	0	-
5.3.2(Rated voltages)	-	0	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	2000	-
5.3.2.3(Rated impulse withstand voltage)	-	2000	-
5.3.3(Currents)	-	2000	-
5.3.3.2(Conventional free air thermal current)	-	2000	-
5.3.3.3(Conventional enclosed thermal current)	-	2000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	-
5.3.3.5(Rated uninterrupted current)	-	2000	-
5.3.4(Rated frequency)	-	2000	-
5.3.5(Rated duty)	-	2000	-
5.3.5.2(Eight-hour duty)	-	2000	-
5.3.5.3(Uninterrupted duty)	-	2000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	-
5.3.6.2(Rated making capacity)	-	2000	-
5.3.6.3(Rated breaking capacity)	-	2000	-
5.3.7(Short-circuit characteristics)	-	2000	-
5.3.7.1(Rated short-time withstand current)	-	2000	-
5.3.7.2(Rated short-circuit making capacity)	-	2000	-
5.3.7.4(Rated conditional short-circuit current)	-	2000	-
5.4(Utilization category)	-	2000	-
5.5(Control circuits)	-	2000	-
5.6(Auxiliary circuits)	-	2000	-
5.7(Relays and releases)	-	2000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	-
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.1.5Special tests(Special tests)	-	140000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.4.2(Temperature-rise)	-	15000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.8.2(Overload test)	-	50000	-
9.3.9.2(Determination of critical load current)	-	45000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.11(Climatic test)	-	50000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
8.3(Electromagnetic compatibility tests)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	15000	-
9.3.4.8(Strength of actuator mechanism)	-	25000	-
9.3.5.3(Dielectric verification)	-	25000	-
9.3.5.5(Temperature-rise verification)	-	15000	-
9.3.6.4(Dielectric verification)	-	25000	-
9.3.6.6(Temperature-rise verification)	-	15000	-
9.3.7.4(Dielectric verification)	-	25000	-
9.3.7.6(Temperature-rise verification)	-	15000	-
9.3.8.3(Dielectric verification)	-	25000	-
9.3.8.5(Temperature-rise verification)	-	15000	-
9.3.9.3(Critical load current performance)	-	45000	-
9.3.5.4(Leakage current)	-	10000	-
9.3.6.5(Leakage current)	-	10000	-
9.3.7.5(Leakage current)	-	10000	-
9.3.8.4(Leakage current)	-	10000	-
8.3.2(Immunity)	-	20000	-
8.3.3(Emission)	-	20000	-
3.1(General)	-	0	-
4(Classification)	-	0	-
5.3.2(Rated voltages)	-	2000	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	2000	-
5.3.2.3(Rated impulse withstand voltage)	-	2000	-
5.3.3(Currents)	-	2000	-
5.3.3.2(Conventional free air thermal current)	-	2000	-
5.3.3.3(Conventional enclosed thermal current)	-	2000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	-
5.3.3.5(Rated uninterrupted current)	-	2000	-
5.3.4(Rated frequency)	-	2000	-
5.3.5(Rated duty)	-	2000	-
5.3.5.2(Eight-hour duty)	-	2000	-
5.3.5.3(Uninterrupted duty)	-	2000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	-
5.3.6.2(Rated making capacity)	-	2000	-
5.3.6.3(Rated breaking capacity)	-	2000	-
5.3.7(Short-circuit characteristics)	-	2000	-
5.3.7.1(Rated short-time withstand current)	-	2000	-
5.3.7.2(Rated short-circuit making capacity)	-	2000	-
5.3.7.4(Rated conditional short-circuit current)	-	2000	-
5.4(Utilization category)	-	2000	-
5.5(Control circuits)	-	2000	-
5.6(Auxiliary circuits)	-	2000	-
5.7(Relays and releases)	-	2000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	2000	-
6.2.2(Marking)	-	1000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	1000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	20000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	5000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1(General)	-	5000	-
8.2.1.2(Limits of operation of power operated equipment)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Impulse withstand voltage)	-	25000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	25000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	30000	-
8.2.4.1(Making and breaking capacities)	-	30000	-
8.2.4.2(Operational performance)	-	70000	-
8.2.4.3(Mechanical durability)	-	90000	-
8.2.4.4(Electrical durability)	-	140000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	45000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
8.2.8(Critical load current performance: DC equipment)	-	45000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	45000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.3(Dielectric test)	-	25000	-
9.1.4(Sampling tests)	-	25000	-
9.1.5Special tests(Special tests)	-	140000	-
9.2(Compliance with constructional requirements)	-	25000	-
9.3.3.6(DC test current ripple)	-	45000	-
9.3.4.2(Temperature-rise)	-	15000	-
9.3.4.3(Test of dielectric properties)	-	25000	-
9.3.4.4(Making and breaking capacities)	-	40000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	20000	-
9.3.4.5(Dielectric verification)	-	25000	-
9.3.4.6(Leakage current)	-	10000	-
9.3.5.2(Operational performance test)	-	140000	-
9.3.6.2(Short-time withstand current test)	-	45000	-
9.3.6.3(Short-circuit making capacity test)	-	45000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	45000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	45000	-
9.3.8.2(Overload test)	-	50000	-
9.3.9.2(Determination of critical load current)	-	45000	-
9.5.2(Mechanical durability)	-	90000	-
9.5.3(Electrical durability)	-	140000	-
9.5.4(Damp heat, salt mist, vibration and shock)	-	50000	-
D.7.1.1(Ambient air temperature)	-	1000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
D.9.3.10(Thermal cycling test)	-	25000	-
D.9.3.11(Climatic test)	-	50000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	15000	-
E.9.2(Current cycling test)	-	20000	-
E.9.2.4(Temperature measurements)	-	15000	-
E.9.3.1(Flexion test)	-	25000	-
E.9.3.2(Pull-out test)	-	25000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	1000	-
9.3.4.7(Temperature-rise verification)	-	15000	-
9.3.4.8(Strength of actuator mechanism)	-	25000	-
9.3.5.3(Dielectric verification)	-	25000	-
9.3.5.5(Temperature-rise verification)	-	15000	-
9.3.6.4(Dielectric verification)	-	25000	-
9.3.6.6(Temperature-rise verification)	-	15000	-
9.3.7.4(Dielectric verification)	-	25000	-
9.3.7.6(Temperature-rise verification)	-	15000	-
9.3.8.3(Dielectric verification)	-	25000	-
9.3.8.5(Temperature-rise verification)	-	15000	-
9.3.9.3(Critical load current performance)	-	45000	-
9.3.5.4(Leakage current)	-	10000	-
9.3.6.5(Leakage current)	-	10000	-
9.3.7.5(Leakage current)	-	10000	-
9.3.8.4(Leakage current)	-	10000	-

25 Mar, 2028

-
"1 8.3.2 (Immunity) Immunity Test facility is not available. 2 8.3.3 (Emission) Emission Test facility is not available. 3 8.3 (Electromagnetic compatibility tests) Electromagnetic compatibility tests Test facility is not available."

4374

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation/ Alloy Designation/ Temper Designation

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	800	-
Cl-6.1, Table-1(Fe)	-	800	-
Cl-6.1, Table-1(Cu)	-	800	-
Cl-6.1, Table-1(Mn)	-	800	-
Cl-6.1, Table-1(Mg)	-	800	-
Cl-6.1, Table-1(Cr)	-	800	-
Cl-6.1, Table-1(Ni)	-	800	-
Cl-6.1, Table-1(Zn)	-	800	-
Cl-6.1, Table-1(Pb)	-	800	-
Cl-6.1, Table-1(Sn)	-	800	-
Cl-6.1, Table-1(Ti)	-	800	-
Cl-6.1, Table-1(Others elements Each)	-	800	-
Cl-6.1, Table-1(Others elements Total)	-	800	-
Cl-6.1, Table-1(Aluminium)	-	800	-
Cl-6.2(The chemical analysis)	-	800	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	800	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	800	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	800	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	800	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	800	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	800	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	800	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	800	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	800	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	800	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	800	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	800	-
Cl-7.2(Tensile Tests)	-	1500	-
Cl-7.3(Test Pieces)	-	100	-
Cl-7.4(Hardness)	-	1000	-
Cl-8(Freedom from Defects)	-	0	-
Cl-11(RETEST)	-	100	-
Cl-13(Marking)	-	100	-
Cl. 6(Silicon)	-	800	-
Cl. 6(Iron)	-	800	-
Cl. 6(Copper)	-	800	-
Cl. 6(Manganese)	-	800	-
Cl. 6(Magnesium)	-	800	-
Cl. 6(Chromium)	-	800	-
Cl. 6(Nickel)	-	800	-
Cl. 6(Zinc)	-	800	-
Cl. 6(Lead)	-	800	-
Cl. 6(Tin)	-	800	-
Cl. 6(Titanium)	-	800	-
Cl. 6(Others Element Each)	-	800	-
Cl. 6(Others Element Total)	-	800	-
Cl. 6(Aluminium)	-	800	-
Cl. 6(Silver)	-	800	-
Cl. 6(Zirconium)	-	800	-
Cl. 6(Titanium+Zirconium)	-	800	-
Cl. 6(Antimony)	-	800	-
Cl. 6(Cobalt)	-	800	-
Cl. 6(Antimony+Cobalt)	-	800	-
Cl. 6(Beryllium)	-	800	-
10(Pressure Test)	-	1000	-
Cl-6.1, Table-1(Si)	-	0	-
Cl-6.1, Table-1(Fe)	-	0	-
Cl-6.1, Table-1(Cu)	-	0	-
Cl-6.1, Table-1(Mn)	-	0	-
Cl-6.1, Table-1(Mg)	-	0	-
Cl-6.1, Table-1(Cr)	-	0	-
Cl-6.1, Table-1(Ni)	-	0	-
Cl-6.1, Table-1(Zn)	-	0	-
Cl-6.1, Table-1(Pb)	-	0	-
Cl-6.1, Table-1(Sn)	-	0	-
Cl-6.1, Table-1(Ti)	-	0	-
Cl-6.1, Table-1(Others elements Each)	-	0	-
Cl-6.1, Table-1(Others elements Total)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	0	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	0	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	0	-
Cl. 6(Tin)	-	0	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	0	-
Cl. 6(Zirconium)	-	0	-
Cl. 6(Titanium+Zirconium)	-	0	-
Cl. 6(Antimony)	-	0	-
Cl. 6(Cobalt)	-	0	-
Cl. 6(Antimony+Cobalt)	-	0	-
Cl. 6(Beryllium)	-	0	-
10(Pressure Test)	-	0	-
Cl-6.1, Table-1(Si)	-	0	-
Cl-6.1, Table-1(Fe)	-	0	-
Cl-6.1, Table-1(Cu)	-	0	-
Cl-6.1, Table-1(Mn)	-	0	-
Cl-6.1, Table-1(Mg)	-	0	-
Cl-6.1, Table-1(Cr)	-	0	-
Cl-6.1, Table-1(Ni)	-	0	-
Cl-6.1, Table-1(Zn)	-	0	-
Cl-6.1, Table-1(Pb)	-	0	-
Cl-6.1, Table-1(Sn)	-	0	-
Cl-6.1, Table-1(Ti)	-	0	-
Cl-6.1, Table-1(Others elements Each)	-	0	-
Cl-6.1, Table-1(Others elements Total)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	0	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	0	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	0	-
Cl. 6(Tin)	-	0	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	0	-
Cl. 6(Zirconium)	-	0	-
Cl. 6(Titanium+Zirconium)	-	0	-
Cl. 6(Antimony)	-	0	-
Cl. 6(Cobalt)	-	0	-
Cl. 6(Antimony+Cobalt)	-	0	-
Cl. 6(Beryllium)	-	0	-
10(Pressure Test)	-	0	-
Cl-6.1, Table-1(Si)	-	0	-
Cl-6.1, Table-1(Fe)	-	0	-
Cl-6.1, Table-1(Cu)	-	0	-
Cl-6.1, Table-1(Mn)	-	0	-
Cl-6.1, Table-1(Mg)	-	0	-
Cl-6.1, Table-1(Cr)	-	0	-
Cl-6.1, Table-1(Ni)	-	0	-
Cl-6.1, Table-1(Zn)	-	0	-
Cl-6.1, Table-1(Pb)	-	0	-
Cl-6.1, Table-1(Sn)	-	0	-
Cl-6.1, Table-1(Ti)	-	0	-
Cl-6.1, Table-1(Others elements Each)	-	0	-
Cl-6.1, Table-1(Others elements Total)	-	0	-
Cl-6.1, Table-1(Aluminium)	-	0	-
Cl-6.2(The chemical analysis)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	0	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	0	-
Cl-7.2(Tensile Tests)	-	0	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	0	-
Cl-8(Freedom from Defects)	-	0	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	0	-
Cl. 6(Silicon)	-	0	-
Cl. 6(Iron)	-	0	-
Cl. 6(Copper)	-	0	-
Cl. 6(Manganese)	-	0	-
Cl. 6(Magnesium)	-	0	-
Cl. 6(Chromium)	-	0	-
Cl. 6(Nickel)	-	0	-
Cl. 6(Zinc)	-	0	-
Cl. 6(Lead)	-	0	-
Cl. 6(Tin)	-	0	-
Cl. 6(Titanium)	-	0	-
Cl. 6(Others Element Each)	-	0	-
Cl. 6(Others Element Total)	-	0	-
Cl. 6(Aluminium)	-	0	-
Cl. 6(Silver)	-	0	-
Cl. 6(Zirconium)	-	0	-
Cl. 6(Titanium+Zirconium)	-	0	-
Cl. 6(Antimony)	-	0	-
Cl. 6(Cobalt)	-	0	-
Cl. 6(Antimony+Cobalt)	-	0	-
Cl. 6(Beryllium)	-	0	-
10(Pressure Test)	-	0	-

-
Included w.e.f 23.07.2025 Excluding Cl. 8.2.1, 8.2.2 (Optional Tests)

4375

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17263 (2022)

Textiles - Polyester staples fibres - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification (IS 17263))	-	1000	-
5(Identification (IS 17263))	-	30000	-
6 & Table-3(Mean Linear Density (IS 234))	-	2000	-
6 & Table-3(Cut Length (IS 10014 Part-1))	-	2000	-
6 & Table-3(Average Elongation at Break (IS 235))	-	2000	-
6 & Table-3(Average Tenacity (IS 235))	-	2000	-
6 & Table-3(Hollowness (IS 17263))	-	2000	-
6 & Table-3(Crimp Reoval (For filing nonwoven Fiber Only) (IS 17263))	-	2000	-
6 & Table-3(Sinking Time (For spun lace fiber only)(IS 17263))	-	2000	-
6 & Table-4(Isophthalic Acid (IS 16481))	-	2000	-
6 & Table-4(Phosphorus Content (IS 17263))	-	2000	-
6 & Table-4(Ultraviolet Resistence (IS 13162 Part-2))	-	35000	-
6 & Table-4(Water Soluble Matter (IS 3456))	-	2000	-
6 & Table-4(Silicon Content (IS 17263))	-	2000	-
6 & Table-4(Colour strength with reference to standard shade (IS 17263))	-	2000	-
6 & Table-4(Colour difference with reference to standard shade (IS 17263))	-	2000	-
6 & Table-4(L Colour Value (IS 17263))	-	2000	-
6 & Table-4(Whiteness Index (IS 17263))	-	2000	-
6 & Table-4(Resistance to ageing (fibres in sheet form at 40ºC for 168 h) (IS 7016Part-8))	-	35000	-
6 & Table-4(Dry heat (hot air) shrinkage at 180ºC, for 30 min (IS 17263))	-	2000	-
Cl-6.5(Commercial Mass (IS 7703 Part-3))	-	2000	-
6.4 & Table 6(Colour Fastness to Light (IS/ISO 105-B01))	-	5500	-
6.4 & Table 6(Colour Fastness to Washing (IS/ISO 105-C10))	-	2500	-
6.4 & Table 6(Colour Fastness to Rubbing (IS/ISO 105-X12))	-	2500	-
6.4 & Table 6("Colour Fastness to Perspiration (acidic and alkaline) (IS/ISO 105-E04)")	-	2500	-
8(Marking (IS 17263))	-	1000	-
6.2(Freedom from Major Defects)	-	2500	-
6.4- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	2000	-
6.4- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	2000	-
6.4- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	2000	-
6.4- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	2000	-
6.4- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	2000	-
6.4- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	2000	-
6.1 Table 4(Moisture regain % Max at equilibrium condition)	-	2000	-
6.2 Table 4(Colour Strength with reference to standard yarn, %)	-	2000	-
6.1 Table 4(Phosphorus content)	-	2000	-
6.1 Table 4(Water soluble matter %)	-	2000	-
6.1 Table 4(Colour strength with reference to std shade %)	-	2000	-
6.1 Table 4(Colour difference with ref to std shade measured asDE)	-	2000	-
6.1 Table 4(L colour value %)	-	2000	-
6.1 Table 3(Sinking time, s)	-	2000	-
6.1 Table 4(Whiteness index)	-	2000	-
6.4 Table 6(Colour Fastness to light)	-	5500	-
6.4 Table 6(Colour Fastness to washing , test 2)	-	2500	-
6.4 Table 6(Colour Fastness to Rubbing)	-	2500	-
6.4 Table 6(Colour Fastness to perspiration)	-	2500	-
6.1 Table 3(Mean Linear Density ,Denier)	-	2000	-
6.1 Table 3(Cut Length)	-	2000	-
6.1 Table 3(Average elongation at break, %)	-	2000	-
6.1 Table 3(Average tenacity,gpd)	-	2000	-
6.1 Table 3(Hollowness, %)	-	2000	-
6.1 Table 3(Crimp removal %)	-	2000	-
6.1 Table 3(Sinking time,s)	-	2000	-
6 & Table-4(Moisture Regain (IS 17263))	-	2500	-
6.3(Lustre/Brightness)	-	5500	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion 6 & Table-4 (Anti Microbial activity Value) and Table 7

4376

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.2(Type of installation)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.3(Types of inlets)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.4(Clamping means)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.5(Minimum temperature during installation)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.6, 7.7, 7.8(The degree of ingress protection)	-	300	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.9(The provision for fixing accessories to the boxes )	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.1(The method of fixing the terminals)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.1(marking)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.3(BIS Certification Marking)	-	250	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
9.0(Dimensions)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
10.0(Protection against electric shock)	-	1250	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
11.0(PROVISION FOR EARTHING)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
12.0(Constructions)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance to ingress of solid objects)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance toharmful ingress of water)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance to ageing)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
14.0(insultation resistance)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
14.0(electric strength)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
15.0(Mechanical strength)	-	3000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
16.0(resistance to heat)	-	2000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(creepage distance)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(clearances)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(distance through seating compund)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
18.0(Resistance to insulating material to abnormal heat and fire)	-	2000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
19.0(Resistance to tracking)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
20.0(Resistance to corrosion)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
21.0(Electromagnetic compatibility (EMC))	-	175000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-

31 Dec, 2026

-
Included w.e.f 30.06.2025

4377

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

All

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	53000	-
Cl 5.2.2(" Height of upper ")	-	53000	-
Cl 5.2.3(Heel area)	-	53000	-
Cl 5.3.1.1(Construction of whole footwear)	-	53000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	53000	-
Cl 5.3.2(Leak proofness)	-	53000	-
Cl 5.3.3(Specific ergonomic features)	-	53000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	53000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	53000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	53000	-
Cl 5.3.6(Seam strength)	-	53000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	53000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	53000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	53000	-
Cl 5.4.2(Thickness)	-	53000	-
Cl 5.4.3(Tear strength)	-	53000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	53000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	53000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	53000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	53000	-
Cl 5.4.5(Flexing resistance)	-	53000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	53000	-
Cl 5.4.7(Resistance to hydrolysis)	-	53000	-
Cl 5.5.2(Lining- Tear strength)	-	53000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	53000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	53000	-
Cl 5.6.2(Tear strength of tongue)	-	53000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	53000	-
Cl 5.7.2(Water permeability of insock)	-	53000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	53000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	53000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	53000	-
Cl 5.8.2.1(Thickness of Outsole)	-	53000	-
Cl 5.8.2.2(Cleated area)	-	53000	-
Cl 5.8.2.3(Cleat height)	-	53000	-
Cl 5.8.3(Outsole- Tear strength)	-	53000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	53000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	53000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	53000	-
Cl 5.8.7(Interlayer bond strength)	-	53000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	53000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	53000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	53000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	53000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	53000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	53000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	53000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	53000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	53000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	53000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	53000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	53000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	53000	-
Cl 6.2.4(Energy absorption of seat region)	-	53000	-
Cl 6.2.5(Water resistance)	-	53000	-
Cl 6.2.6(Ankle protection)	-	53000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	53000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	53000	-
Cl 6.2.7.3(Resistance to cutting)	-	53000	-
Cl 6.2.8(Scuff cap)	-	53000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	53000	-
Cl 6.3(Upper — Water penetration and absorption)	-	53000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	53000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	53000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	53000	-
Cl 6.4.3.2(Design of Ladder grip)	-	53000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	53000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	53000	-
Cl 7("Marking ")	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	53000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	53000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	53000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	53000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	53000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	53000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	53000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	53000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	53000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	53000	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	53000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	53000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	53000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	53000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	53000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	53000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	53000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	53000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	53000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	53000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	53000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	53000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	53000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	53000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	53000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	53000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	53000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	53000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	53000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	53000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	53000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	53000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	53000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	53000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	53000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	53000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	53000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	53000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	53000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	53000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	53000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	53000	-

08 May, 2028

-
Included w.e.f. 07.04.2026

4378

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

Class A,AS&B/0.5 ml to 100 ml

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1&3(Marking)	-	200	-
3(Class of Accuracy)	-	200	-
4.1(Nominal capacities)	-	200	-
4.2(Accuracy)	-	800	-
5.1(Material)	-	800	-
5.1(Material)	-	200	-
5.1.1(Limit of Alkalinity)	-	200	-
5.2(Pattern of Pipette)	-	200	-
5.3(Workmanship & Finish)	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(v) Dia. of safety bulb (if provided ))	-	200	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(x) Internal dia. of suction tube D1 )	-	200	-
5.4(xi) External dia. of bulb D2 )	-	200	-
5.4(xii) External dia. of delivery tube D3 )	-	200	-
5.5(Delivery Time)	-	200	-
5.5(Delivery Time)	-	200	-
5.6&7(Graduation line & Visibility )	-	200	-
6.1.2(Marking)	-	200	-
6.1.1&3(Marking)	-	200	-
3(Class of Accuracy)	-	200	-
4.1(Nominal capacities)	-	200	-
4.2(Accuracy)	-	200	-
5.1(Material)	-	200	-
5.1(Material)	-	200	-
5.1.1(Limit of Alkalinity)	-	200	-
5.2(Pattern of Pipette)	-	200	-
5.3(Workmanship & Finish)	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(v) Dia. of safety bulb (if provided ))	-	200	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(x) Internal dia. of suction tube D1 )	-	200	-
5.4(xi) External dia. of bulb D2 )	-	200	-
5.4(xii) External dia. of delivery tube D3 )	-	200	-
5.5(Delivery Time)	-	200	-
5.5(Delivery Time)	-	200	-
5.6&7(Graduation line & Visibility )	-	200	-
6.1.2(Marking)	-	200	-
6.1.1&3(Marking)	-	200	-
3(Class of Accuracy)	-	200	-
4.1(Nominal capacities)	-	200	-
4.2(Accuracy)	-	200	-
5.1(Material)	-	200	-
5.1(Material)	-	200	-
5.1.1(Limit of Alkalinity)	-	200	-
5.2(Pattern of Pipette)	-	200	-
5.3(Workmanship & Finish)	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(v) Dia. of safety bulb (if provided ))	-	200	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(x) Internal dia. of suction tube D1 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
5.6&7(Graduation line & Visibility )	-	0	-
6.1.2(Marking)	-	0	-
4.1(unit of volume)	-	0	-
4.2(delivery volume)	-	0	-
4.3(reference temperature)	-	0	-
5.1(Types and Classes of accuracy)	-	0	-
5.2(Types of single- volume pipette)	-	0	-
Clause- 6.0(Maximum Permissible error)	-	0	-
7.1(Material)	-	0	-
7.2(Shape)	-	0	-
7.3(Bulb)	-	0	-
7.4(Dimensions)	-	0	-
7.5(Top of Pipette)	-	0	-
7.6(Delivery Jet)	-	0	-
7.7(Delivery Time)	-	0	-
7.8(Waiting Time)	-	0	-
Clause- 8.0(Graduation Line)	-	0	-
Clause- 9.0(Setting of the Meniscus)	-	0	-
Clause-10.0(Marking)	-	0	-
6.1.1&3(Marking)	-	0	-
3(Class of Accuracy)	-	0	-
4.1(Nominal capacities)	-	0	-
4.2(Accuracy)	-	0	-
5.1(Material)	-	0	-
5.1(Material)	-	0	-
5.1.1(Limit of Alkalinity)	-	0	-
5.2(Pattern of Pipette)	-	0	-
5.3(Workmanship & Finish)	-	0	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(v) Dia. of safety bulb (if provided ))	-	0	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-
5.4(x) Internal dia. of suction tube D1 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
5.6&7(Graduation line & Visibility )	-	0	-
6.1.2(Marking)	-	0	-
6.1.1&3(Marking)	-	0	-
3(Class of Accuracy)	-	0	-
4.1(Nominal capacities)	-	0	-
4.2(Accuracy)	-	0	-
5.1(Material)	-	0	-
5.1(Material)	-	0	-
5.1.1(Limit of Alkalinity)	-	0	-
5.2(Pattern of Pipette)	-	0	-
5.3(Workmanship & Finish)	-	0	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(v) Dia. of safety bulb (if provided ))	-	0	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-
5.4(x) Internal dia. of suction tube D1 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
5.6&7(Graduation line & Visibility )	-	0	-
6.1.2(Marking)	-	0	-
6.1.1&3(Marking)	-	0	-
3(Class of Accuracy)	-	0	-
4.1(Nominal capacities)	-	0	-
4.2(Accuracy)	-	0	-
5.1(Material)	-	0	-
5.1(Material)	-	0	-
5.1.1(Limit of Alkalinity)	-	0	-
5.2(Pattern of Pipette)	-	0	-
5.3(Workmanship & Finish)	-	0	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(v) Dia. of safety bulb (if provided ))	-	0	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-
5.4(x) Internal dia. of suction tube D1 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
5.6&7(Graduation line & Visibility )	-	0	-
6.1.2(Marking)	-	0	-
4.1(unit of volume)	-	0	-
4.2(delivery volume)	-	0	-
4.3(reference temperature)	-	0	-
5.1(Types and Classes of accuracy)	-	0	-
5.2(Types of single- volume pipette)	-	0	-
Clause- 6.0(Maximum Permissible error)	-	0	-
7.1(Material)	-	0	-
7.2(Shape)	-	0	-
7.3(Bulb)	-	0	-
7.4(Dimensions)	-	0	-
7.5(Top of Pipette)	-	0	-
7.6(Delivery Jet)	-	0	-
7.7(Delivery Time)	-	0	-
7.8(Waiting Time)	-	0	-
Clause- 8.0(Graduation Line)	-	0	-
Clause- 9.0(Setting of the Meniscus)	-	0	-
Clause-10.0(Marking)	-	0	-
Cl-7.4, Table-2 (i)(Overall length)	-	0	-
Cl-7.4, Table-2 (ii)(Internal diameter at the graduation line)	-	0	-
Cl-7.4, Table-2 (iii)(Length of suction tube⎯ valid only for bulb pattern pipettes)	-	0	-
Cl-7.4, Table-2 (iv)(Length of delivery tube ⎯ valid only for bulb pattern pipettes)	-	0	-
Cl-7.4, Table-2 (v)(External diameter of delivery tube ⎯ valid only for bulb pattern pipettes)	-	0	-
Cl-7.4, Table-2 (vi)(External diameter of bulb ⎯ valid only for bulb pattern pipettes)	-	0	-
Cl-7.4, Table-2 (vii)(External diameter of tube ⎯ valid only for straight pattern pipettes)	-	0	-
Cl-7.4, Table-3 (i)(Distance of graduation line from top of pipette (one-mark pipettes))	-	0	-
Cl-7.4, Table-3 (ii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	0	-
Cl-7.4, Table-3 (iii)(Distance from graduation line to tip of jet (one-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	0	-
Cl-7.4, Table-3 (iv)(Wall thickness (one-mark pipettes) ⎯ bulb pattern pipettes)	-	0	-
Cl-7.4, Table-3 (v)(Wall thickness (one-mark pipettes) ⎯ straight pattern pipettes)	-	0	-
Cl-7.4, Table-4 (i)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	0	-
Cl-7.4, Table-4 (ii)(Distance of upper graduation line from top of pipette (two-mark pipettes))	-	0	-
Cl-7.4, Table-4 (iii)(Distance from upper graduation line to tip of jet (two-mark pipettes) ⎯ valid only for straight pattern pipettes)	-	0	-
Cl-7.4, Table-4 (iv)(Distance from lower graduation line to bottom of bulb (two-mark pipettes))	-	0	-
Cl-7.4, Table-4 (v)(Distance from lower graduation line to tip of jet (two-mark pipettes))	-	0	-
Cl-7.4, Table-4 (vi)(Wall thickness (two-mark pipettes) ⎯ bulb pattern pipettes)	-	0	-
Cl-7.4, Table-4 (vii)(Wall thickness (two-mark pipettes) ⎯ straight pattern pipettes)	-	0	-
Cl-11(Visibility of graduation lines, figures and inscriptions)	-	0	-
Cl-12(Colour coding)	-	0	-
Cl-12(Colour coding)	-	0	-

23 May, 2028

-
Included w.e.f.16.07.2025

4379

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17265 (2023)

Textiles 100 Percent Polyester Spun Grey and White Yarns Specification Second Revision

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(CLASSIFICATIONS)	-	1000	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	2000	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	8000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	2000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	2500	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	5000	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	2000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	2000	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	2000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	2000	-
Cl.No. 6.5,(Objectionable Faults)	-	2000	-
Cl.No. 6.6(Commercial Mass)	-	2000	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	2000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	2000	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	2000	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	3000	-
Cl.No.8(MARKING)	-	1000	-
Cl- 6.2.3(Lea breaking strength of folded yarn)	-	2000	-
Cl-6.2.4(Ply twist)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Cl. 6.1 6.2 Table 4 (vi) Antimicrobial activity value and Table 8

4380

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

All Types , 19800,19700,19600,19500,19000,24345,24345 Alclad,31000,40800,51000-A,51000-B,52000,53000,543000,55000,64430,65032,74530

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defect)	-	500	-
5(chemical composition)	-	1500	-
6.1 table 2(0.2% proof strength)	-	1600	-
6.1 table 2(tensile strength)	-	1800	-
6.1 table 2(Elongation)	-	1600	-
8(Dimensions & Tolerances)	-	500	-
5.1, Table 1(Aluminium)	-	1200	-
5.1, Table 1(Copper)	-	1500	-
5.1, Table 1(Magnesium)	-	1150	-
5.1, Table 1(Silicon)	-	1200	-
5.1, Table 1(Iron)	-	1200	-
5.1, Table 1(Mangnese)	-	1000	-
5.1, Table 1(Zinc)	-	1000	-
5.1, Table 1(Titanium and /or other grain refining element)	-	1300	-
5.1, Table 1(Chromium)	-	1250	-
5.1, Table 1(Vanadium)	-	1100	-

-
Included w.e.f 23.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number