BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15632 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4321

Umwelt Research Lab Private Limited, Pune

7175516

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

17750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	0	-
Clause no. 3.1(Top Cover / Top Sheet)	-	500	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	500	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	500	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	Combined test charges for clause 6 are Rs.500
Clause no.6(Diaper Length)	-	0	-
Clause no.6(Diaper Width)	-	0	-
Clause no.6(Diaper Crotch)	-	0	-
Clause no.6(Absorbent Core Width Back)	-	0	-
Clause no.6(Absorbent Core Width Front)	-	0	-
Clause no.6(Core Crotch Width)	-	0	-
Clause no.7.1(pH Value)	-	500	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	500	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	1000	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	1000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	5000	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	2500	-
9(Marking)	-	250	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	4000	Combined test charges for clause 7.7 are Rs.4000
Cl-7.7 (Amendment No-1)(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-butyl phthalate (DBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	0	-

26 Dec, 2026

-
Included w.e.f 18.12.2025 Exclusion: Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity) Clause no. 7.4 (Biocompatibility Evaluation- Irritation) Clause no.7.4 (Biocompatibility Evaluation- Skin Sensitization) Clause no.7.5 (Biodegradability and Compostability (optional)) Clause no.7.6 (Anti-Bacterial Activity Value (optional))

4322

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	200	20% discount to BIS on testing charges
8(Protection against access to live parts)	-	1000	20% discount to BIS on testing charges
10(Power input and current)	-	800	20% discount to BIS on testing charges
11(Heating)	-	1000	20% discount to BIS on testing charges
13.1 &13.2(Leakage current test)	-	500	20% discount to BIS on testing charges
13.1 &13.3(Electric strength test)	-	500	20% discount to BIS on testing charges
14(Transient overvoltages)	-	500	20% discount to BIS on testing charges
15(Moisture resistance)	-	1000	20% discount to BIS on testing charges
15.3(Moisture resistance)	-	500	20% discount to BIS on testing charges
16.1 &16.2(Leakage current test)	-	500	20% discount to BIS on testing charges
16.1 & 16.3(Electric strength test)	-	500	20% discount to BIS on testing charges
17(Overload protection of transformers and associated circuits)	-	200	20% discount to BIS on testing charges
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	800	20% discount to BIS on testing charges
20.1(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
20.2(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
21(Mechanical strength)	-	400	20% discount to BIS on testing charges
22(Construction)	-	400	20% discount to BIS on testing charges
23(Internal wiring)	-	400	20% discount to BIS on testing charges
24(Components)	-	300	20% discount to BIS on testing charges
24.101(Components)	-	300	20% discount to BIS on testing charges
25("Supply connection and external flexible cords")	-	1000	20% discount to BIS on testing charges
26("Terminals for external conductors")	-	400	20% discount to BIS on testing charges
27(Provision for earthing)	-	1000	20% discount to BIS on testing charges
28(Screws and connections)	-	300	20% discount to BIS on testing charges
29("Clearances, creepage distances and solid insulation")	-	500	20% discount to BIS on testing charges
30(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
30.101(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
31(Resistance to rusting)	-	300	20% discount to BIS on testing charges
10(Power input and current)	-	200	20% discount to BIS on testing charges
7(Marking and instructions)	-	200	20% discount to BIS on testing charges
8(Protection against access to live parts)	-	1000	20% discount to BIS on testing charges
10(Power input and current)	-	800	20% discount to BIS on testing charges
11(Heating)	-	1000	20% discount to BIS on testing charges
13.1 &13.2(Leakage current test)	-	500	20% discount to BIS on testing charges
13.1 &13.3(Electric strength test)	-	500	20% discount to BIS on testing charges
14(Transient overvoltages)	-	500	20% discount to BIS on testing charges
15(Moisture resistance)	-	1000	20% discount to BIS on testing charges
15.3(Moisture resistance)	-	500	20% discount to BIS on testing charges
16.1 &16.2(Leakage current test)	-	500	20% discount to BIS on testing charges
16.1 & 16.3(Electric strength test)	-	500	20% discount to BIS on testing charges
17(Overload protection of transformers and associated circuits)	-	200	20% discount to BIS on testing charges
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	800	20% discount to BIS on testing charges
20.1(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
20.2(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
21(Mechanical strength)	-	400	20% discount to BIS on testing charges
22(Construction)	-	400	20% discount to BIS on testing charges
23(Internal wiring)	-	400	20% discount to BIS on testing charges
24(Components)	-	300	20% discount to BIS on testing charges
24.101(Components)	-	300	20% discount to BIS on testing charges
25("Supply connection and external flexible cords")	-	1000	20% discount to BIS on testing charges
26("Terminals for external conductors")	-	400	20% discount to BIS on testing charges
27(Provision for earthing)	-	1000	20% discount to BIS on testing charges
28(Screws and connections)	-	300	20% discount to BIS on testing charges
29("Clearances, creepage distances and solid insulation")	-	500	20% discount to BIS on testing charges
30(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
30.101(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
31(Resistance to rusting)	-	300	20% discount to BIS on testing charges
10(Power input and current)	-	200	20% discount to BIS on testing charges
7(Marking and instructions)	-	200	20% discount to BIS on testing charges
8(Protection against access to live parts)	-	1000	20% discount to BIS on testing charges
10(Power input and current)	-	800	20% discount to BIS on testing charges
11(Heating)	-	1000	20% discount to BIS on testing charges
13.1 &13.2(Leakage current test)	-	500	20% discount to BIS on testing charges
13.1 &13.3(Electric strength test)	-	500	20% discount to BIS on testing charges
14(Transient overvoltages)	-	500	20% discount to BIS on testing charges
15(Moisture resistance)	-	1000	20% discount to BIS on testing charges
15.3(Moisture resistance)	-	500	20% discount to BIS on testing charges
16.1 &16.2(Leakage current test)	-	500	20% discount to BIS on testing charges
16.1 & 16.3(Electric strength test)	-	500	20% discount to BIS on testing charges
17(Overload protection of transformers and associated circuits)	-	200	20% discount to BIS on testing charges
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	800	20% discount to BIS on testing charges
20.1(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
20.2(Stability and mechanical hazards)	-	250	20% discount to BIS on testing charges
21(Mechanical strength)	-	400	20% discount to BIS on testing charges
22(Construction)	-	400	20% discount to BIS on testing charges
23(Internal wiring)	-	400	20% discount to BIS on testing charges
24(Components)	-	300	20% discount to BIS on testing charges
24.101(Components)	-	300	20% discount to BIS on testing charges
25("Supply connection and external flexible cords")	-	1000	20% discount to BIS on testing charges
26("Terminals for external conductors")	-	400	20% discount to BIS on testing charges
27(Provision for earthing)	-	1000	20% discount to BIS on testing charges
28(Screws and connections)	-	300	20% discount to BIS on testing charges
29("Clearances, creepage distances and solid insulation")	-	500	20% discount to BIS on testing charges
30(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
30.101(Resistance to heat and fire)	-	500	20% discount to BIS on testing charges
31(Resistance to rusting)	-	300	20% discount to BIS on testing charges
10(Power input and current)	-	200	20% discount to BIS on testing charges

31 Dec, 2026

-
Included w.e.f. 15.10.2025 Exclusion : "32 (""Radiation, toxicity and similar hazards"") Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Voltage surges) Cl 19.11.4.5 (Immunity to conducted disturbances) Cl 19.11.4.6 (Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics and inter-harmonics) Cl 19.11.4.8 (Abnormal operation) "

4323

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

21930 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	500	Nil
4.1(Raw Material)	-	2000	Nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	Nil
4.2(Tapes – Linear Density )	-	500	Nil
4.2(Construction)	-	500	Nil
4.3(Sacks)	-	500	Nil
4.3.1(Bottom Seam)	-	500	Nil
4.3.1(The two rows of stitches shall be separated from each other)	-	0	Test Charges Included in Bottom Seam Test
4.3.1( The outer stitch)	-	0	Test Charges Included in Bottom Seam Test
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	Test Charges Included in Bottom Seam Test
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	Test Charges Included in Bottom Seam Test
4.3.1(stitches/dm)	-	0	Test Charges Included in Bottom Seam Test
4.3.2(Mouth)	-	0	Test Charges Included in Bottom Seam Test
4.4(Liner IS 10146 or IS 10910.)	-	500	Nil
4.4(Mass of the loose liner )	-	500	Nil
4.4(Width of the loose liner)	-	500	Nil
4.4(Length of the line)	-	500	Nil
4.4(Bottom seam of the loose liner)	-	500	Nil
4.4.1(Liner)	-	500	Nil
4.5 and Table 1 i(Capacity)	-	500	Nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	Nil
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	Test Charges Included in Dimensions Inside Length Test
5.2 and Table 1 iii(Ends per dm )	-	500	Nil
5.2 and Table 1 iv(Picks per dm )	-	0	Test Charges Included in Ends per dm Test
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	Nil
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	Nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	Nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	Nil
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	Nil
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	Test Charges Included in Breaking Strength Test
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	Test Charges Included in Breaking Strength Test
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	U.V Light Exposure Charges RS.10180
5.2 and Table 1 x(Ash content )	-	1200	Nil
5.3(UV Resistance)	-	10180	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	500	-

09 Aug, 2028

-
-

4324

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

21430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	Nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	Nil
4.2(Tapes – Linear Density )	-	500	Nil
4.3(Sacks)	-	500	Nil
4.3.1(Bottom Seam)	-	0	Charge included in sacks , cl.4.3
4.3.2(Mouth)	-	0	Charge included in sacks , cl.4.3
4.4 and Table 1 i(Capacity)	-	500	Nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	Nil
5.2 and Table 1 iii(Ends per dm )	-	500	Nil
5.2 and Table 1 iv(Picks per dm )	-	500	Nil
5.1 and Table 1 v(Mass of sack )	-	500	Nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	Nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	Nil
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	Rs. 10180 for UV Resistance exposure ( 192 hours).
5.2 and Table 1 x(Ash content )	-	1200	Nil
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	500	-

09 Aug, 2028

-
-

4325

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

17300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Materials)	-	1500	Tube Material by Pyrolysis /Chemical Test
Cl 3.2(Classification)	-	0	Test Charges are covered in Cl 3.1 (Materials)
Cl 3.2.1(Blend Name)	-	2600	% Rubber HC Content by Volume: Rs. 1700/- & Density: Rs.900/- Total Rs. 2600/-
Cl 3.3(Fit)	-	500	Workmanship, Form & Fit Test
Cl 3.3.1(Thickness Uniformity)	-	1600	-
Cl 4.1.1(Elongation)	-	1800	-
Cl 4.1.2(Strength of Splice)	-	1900	-
Cl 4.1.3(Set After Ageing)	-	2100	-
Cl 4.1.4(Accelerated Ageing)	-	4300	-
Cl 5(AIR TIGHTNESS)	-	500	-
Cl 6(MARKING)	-	500	Total Test Charges are Rs.17,300/- per sample (Note : 10% Discount in case of test charges are borne by BIS)
Cl 3.1(Materials)	-	1500	Tube Material by Pyrolysis /Chemical Test
Cl 3.2(Classification)	-	0	Test Charges are covered in Cl 3.1 (Materials)
Cl 3.2.1(Blend Name)	-	2600	% Rubber HC Content by Volume: Rs. 1700/- & Density: Rs.900/- Total Rs. 2600/-
Cl 3.3(Fit)	-	500	Workmanship, Form & Fit Test
Cl 3.3.1(Thickness Uniformity)	-	1600	-
Cl 4.1.1(Elongation)	-	1800	-
Cl 4.1.2(Strength of Splice)	-	1900	-
Cl 4.1.3(Set After Ageing)	-	2100	-
Cl 4.1.4(Accelerated Ageing)	-	4300	-
Cl 5(AIR TIGHTNESS)	-	500	-
Cl 6(MARKING)	-	500	Total Test Charges are Rs.17,300/- per sample (Note : 10% Discount in case of test charges are borne by BIS)

15 Sep, 2028

-
Included w.e.f. 26.09.2025

4326

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17682 (2021)

ALUMINIUM COMPOSITE PANEL SPECIFICATION

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1(Polymer Granules)	-	5000	Rs. 42000/- for all test excluding Table 3 & 4 Clause 5.1 Melt flow Index - Rs.2500/- Ash content - Rs.2500/-
Clause 5.2(Aluminium Alloy Sheets)	-	1000	Clause 5.2 - Rs.500/- Clause 5.3 - Rs.500/-
Clause 5.4(Surface Coating)	-	500	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	3000	Clause 6.1 - Length - Rs.750/- Width - Rs.750/- Clause 6.2 Thickness - Rs.1500/- Table-1 Edge Straightness - Rs.1500/- Table-1 Squarenss - Rs.1500/-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	2000	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	1500	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	1500	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	1500	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	2500	-
"Clause 7.1 Table 3(i)"(Coating type)	-	2000	Coating type and Coating Thickness - Rs.2000/-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	7000	Dry - Rs.2000/- Wet - Rs.2000/- Boiling water - Rs.3000/-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	2000	-
"Clause 7.1 Table 3(v)"(Gloss)	-	2000	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	Amendment no.1,Sept.2024 Sl. no. (V) a).1 Humidity Test - Rs.200,000/- a).2 Corrosion Test-Rs.200,000/- b) Weathering test PVDF/FEVE(2 Coat) - Rs.400,000/- PVDF/FEVE(3 Coat)- Rs.400,000/- SDP(2/3 Coat)-Rs.300,000/- Polyester(1 Coat)-Rs.100,000/-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	7500	Amendment no.1,Sept.2024 a) 1500/- b) 1500/- c) 1500/- d) 1500/- e) 1500/-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	15000	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	15000	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	15000	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	115000	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	35000	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	15000	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	5000	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	5000	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6.1(Normal dimensions)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Cl-6.2(Thickness)	-	0	-
Cl-6.3(Tolerances)	-	0	-
Cl-5.3(Adhesive)	-	0	-
Cl-6(Edge straightness, Max)	-	0	-
Cl-6(Squareness, Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6.1(Normal dimensions)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Cl-6.2(Thickness)	-	0	-
Cl-6.3(Tolerances)	-	0	-
Cl-5.3(Adhesive)	-	0	-
Cl-6(Edge straightness, Max)	-	0	-
Cl-6(Squareness, Max)	-	0	-

08 Feb, 2027

-
1 """Clause 7.2 Table 5(i)"" (Sound transmission class (STC), dB, Min) Sound transmission class Facility not available 2 ""Clause 7.2 Table 5(ii)"" (Sound absorption coefficient, percent, Min) Sound absorption coefficient Facility not available"

4327

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.99	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	14999.96	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	14999.97	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	15000	-
Cl-7.2.3(Grain Direction)	-	15000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	-
Cl-7.2.5.2(Splits)	-	15000	-
Cl-7.2.5.3(Overlap)	-	15000	-
Cl-8.1(Dimensions -length)	-	15000	-
Cl-8.2(Thickness of the plywood boards)	-	15000	-
Cl-8.3(Squareness)	-	15000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	-
Cl-11.3.2(Mycological Test)	-	15000	-
Cl-11.4(Moisture Content)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.6(Formaldehyde Content Test)	-	15000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	-
Cl-9(WORKMANSHIP AND FINISH)	-	15000	-
Cl-7.2.4(Scarf Joints)	-	15000	-
Cl. 4(Grades)	-	15000	-
Cl.5.1(Type based on classification by appearance)	-	15000	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	15000	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-13(Marking)	-	15000	-
Cl-5.1(Classification by appearance)	-	15000	-
Cl-5.2, Table- 1 (i)(Blister)	-	15000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	14999.98	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	14999.98	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	14999.99	-
Cl-5.2, Table- 1 (xi)(Patches)	-	14999.98	-
Cl-5.2, Table- 1 (xii)(Splits)	-	14999.99	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	14999.99	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	-
Cl-6.1(Timber)	-	15000	-
Cl-6.2(Adhesive)	-	15000	-
Cl-7.2.1(Thickness of veneers)	-	14999.98	-
Cl-7.2.3(Grain Direction)	-	14999.99	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	14999.97	-
Cl-7.2.5.2(Splits)	-	14999.98	-
Cl-7.2.5.3(Overlap)	-	14999.98	-
Cl-8.1(Dimensions -length)	-	14999.98	-
Cl-8.2(Thickness of the plywood boards)	-	14999.98	-
Cl-8.3(Squareness)	-	14999.97	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	14999.97	-
Cl-11.3.2(Mycological Test)	-	14999.98	-
Cl-11.4(Moisture Content)	-	14999.97	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	14999.98	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	14999.97	-
Cl-11.6(Formaldehyde Content Test)	-	14999.98	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	14999.97	-
Cl-9(WORKMANSHIP AND FINISH)	-	14999.98	-
Cl-7.2.4(Scarf Joints)	-	14999.98	-
Cl. 4(Grades)	-	14999.98	-
Cl.5.1(Type based on classification by appearance)	-	14999.98	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	15000	-
Cl.8.1(Dimensions -width)	-	14999.96	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	14999.97	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	15000	-
Cl-8.3(Edge Straightness)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	14999.97	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	15000	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	14999.98	-
Cl-13(Marking)	-	15000	-

-
Included w.e.f. 02.09.2025

4328

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 8931 (2021)

Copper alloy single taps, combination tap assemblies, stop valves and single lever mixers for water services Specification (second revision)

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Classfication)	-	0	-
Cl 4(Classfication)	-	0	-
Cl 6.1(Manufacture,Workmanship & Construction)	-	4000	-
Cl 6.5(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.6(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.7(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.8(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.9(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.10(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.11(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.12(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.13(Manufacture,Workmanship & Construction)	-	0	-
Cl 7(DIMENSIONS)	-	10000	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 8(ADDITIONAL REQUIREMENTS FOR ACCESSIBLE TAPS)	-	6000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	18000	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 11(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	14000	-
As per Table-1(Carbon)	-	5500	For complete chemical test
As per Table-1(Sulphur)	-	0	-
As per Table-1(Phosphorus)	-	0	-
As per Table-1(Manganese)	-	0	-
As per Table-1(Nitrogen)	-	0	-
As per Table-1(Silicon)	-	0	-
As per Table-1(Aluminium)	-	0	-
As per Table-1(Chromium)	-	0	-
As per Table-1(Vanadium)	-	0	-
As per Table-1(Molybdenum)	-	0	-
As per Table-1(Iron)	-	0	-
As per Table-1(Nickel)	-	0	-
As per Table-1(Copper)	-	0	-
As per Table-1(Zinc)	-	0	-
As per Table-1(Lead)	-	0	-
As per Table-1(Boron)	-	0	-
Cl 4(Classfication)	-	0	-
Cl 4(Classfication)	-	0	-
Cl 6.1(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.5(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.6(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.7(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.8(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.9(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.10(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.11(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.12(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.13(Manufacture,Workmanship & Construction)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 8(ADDITIONAL REQUIREMENTS FOR ACCESSIBLE TAPS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 11(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	0	-
As per Table-1(Carbon)	-	0	-
As per Table-1(Sulphur)	-	0	-
As per Table-1(Phosphorus)	-	0	-
As per Table-1(Manganese)	-	0	-
As per Table-1(Nitrogen)	-	0	-
As per Table-1(Silicon)	-	0	-
As per Table-1(Aluminium)	-	0	-
As per Table-1(Chromium)	-	0	-
As per Table-1(Vanadium)	-	0	-
As per Table-1(Molybdenum)	-	0	-
As per Table-1(Iron)	-	0	-
As per Table-1(Nickel)	-	0	-
As per Table-1(Copper)	-	0	-
As per Table-1(Zinc)	-	0	-
As per Table-1(Lead)	-	0	-
As per Table-1(Boron)	-	0	-
Cl 4(Classfication)	-	0	-
Cl 4(Classfication)	-	0	-
Cl 6.1(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.5(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.6(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.7(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.8(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.9(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.10(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.11(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.12(Manufacture,Workmanship & Construction)	-	0	-
Cl 6.13(Manufacture,Workmanship & Construction)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 7(DIMENSIONS)	-	0	-
Cl 8(ADDITIONAL REQUIREMENTS FOR ACCESSIBLE TAPS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 10(PERFORMANCE REQUIREMENTS)	-	0	-
Cl 11(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	0	-
As per Table-1(Carbon)	-	0	-
As per Table-1(Sulphur)	-	0	-
As per Table-1(Phosphorus)	-	0	-
As per Table-1(Manganese)	-	0	-
As per Table-1(Nitrogen)	-	0	-
As per Table-1(Silicon)	-	0	-
As per Table-1(Aluminium)	-	0	-
As per Table-1(Chromium)	-	0	-
As per Table-1(Vanadium)	-	0	-
As per Table-1(Molybdenum)	-	0	-
As per Table-1(Iron)	-	0	-
As per Table-1(Nickel)	-	0	-
As per Table-1(Copper)	-	0	-
As per Table-1(Zinc)	-	0	-
As per Table-1(Lead)	-	0	-
As per Table-1(Boron)	-	0	-

08 Feb, 2027

-
Included w.e.f. 12.11.2025

4329

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	500	-
8(Dimension and Tolerance)	-	1500	-
9.1 - 1(Copper)	-	700	-
9.1 - 1(Arsenic)	-	700	-
9.1 - 1(Iron)	-	700	-
9.1 - 1(Lead)	-	700	-
9.1 - 1(Nickel)	-	700	-
9.1 - 1(Tin)	-	700	-
9.1 - 1(Phosphorus)	-	700	-
9.1 - 1(Total impurities)	-	700	-
9.1 - 1(Manganese)	-	700	-
9.1 - 1(Aluminium)	-	700	-
9.1 - 1(Zinc)	-	700	-
10.1.1 - 2(Tensile Test)	-	3000	-
10.1.1 - 2(0.2 Proof stress)	-	2500	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	1000	-
10.2(Flattening Test)	-	2000	-
10.3(Drift Expanding Test)	-	2000	-
10.4.2(Hydrostatic Test)	-	2500	-
10.4.3(Pneumatic Test)	-	1500	-
10.4.1(Eddy Current Test)	-	1500	-
10.5(Microscopic Examination)	-	2000	-
10.6(Hydrogen Embrittlement Test)	-	4500	-
11.1(Residue Test Or cleanliness test)	-	1500	-
Cl-11.2(Residue Test Or cleanliness test)	-	1500	-
7(Freedom from defect)	-	0	-
8(Dimension and Tolerance)	-	0	-
9.1 - 1(Copper)	-	0	-
9.1 - 1(Arsenic)	-	0	-
9.1 - 1(Iron)	-	0	-
9.1 - 1(Lead)	-	0	-
9.1 - 1(Nickel)	-	0	-
9.1 - 1(Tin)	-	0	-
9.1 - 1(Phosphorus)	-	0	-
9.1 - 1(Total impurities)	-	0	-
9.1 - 1(Manganese)	-	0	-
9.1 - 1(Aluminium)	-	0	-
9.1 - 1(Zinc)	-	0	-
10.1.1 - 2(Tensile Test)	-	0	-
10.1.1 - 2(0.2 Proof stress)	-	0	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	0	-
10.2(Flattening Test)	-	0	-
10.3(Drift Expanding Test)	-	0	-
10.4.2(Hydrostatic Test)	-	0	-
10.4.3(Pneumatic Test)	-	0	-
10.4.1(Eddy Current Test)	-	0	-
10.5(Microscopic Examination)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	0	-
11.1(Residue Test Or cleanliness test)	-	0	-
Cl-11.2(Residue Test Or cleanliness test)	-	0	-

08 Feb, 2027

-
Included w.e.f. 12.11.2025

4330

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	7000	Rs. 7000 for entire Table 1
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	4000	Rs. 4000 for entire Table -4
11(Transverse Tension Test,%)	-	3500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	3000	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	3000	-
14(Reverse Flattaning Test)	-	2500	-
15(Flattaning Test-IS 2328)	-	2500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	3500	-
18(Leak Tighteness Test)	-	2500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	4000	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	3500	-
22(Workmanship, Finish and Appearance)	-	1500	-
23(Repair by Welding or Grinding)	-	0	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Yield Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flange Test)	-	0	-
Clause 14(Reverse Flattening Test)	-	0	-
Clause 15(Flattening Test)	-	0	-
Clause 16(Grain Size)	-	0	-
Clause 18()	-	0	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 22(Workmanship, Finish & Appearance)	-	0	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	0	-
12.2(Hardness test)	-	0	-
17(Sampling)	-	0	-
25(Marking)	-	0	-
6.7, Table 7, ii)(c) Chromium VI)	-	0	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	0	-
11(Transverse Tension Test,%)	-	0	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	0	-
14(Reverse Flattaning Test)	-	0	-
15(Flattaning Test-IS 2328)	-	0	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	-
18(Leak Tighteness Test)	-	0	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	0	-
22(Workmanship, Finish and Appearance)	-	0	-
23(Repair by Welding or Grinding)	-	0	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Yield Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flange Test)	-	0	-
Clause 14(Reverse Flattening Test)	-	0	-
Clause 15(Flattening Test)	-	0	-
Clause 16(Grain Size)	-	0	-
Clause 18()	-	0	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 22(Workmanship, Finish & Appearance)	-	0	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	0	-
12.2(Hardness test)	-	0	-
17(Sampling)	-	0	-
25(Marking)	-	0	-
6.7, Table 7, ii)(c) Chromium VI)	-	0	-

08 Feb, 2027

-
Included w.e.f. 12.11.2025

4331

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 2494 : Part 2 (1993)

V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Fire Resistant Antistatic V-belts)	-	5000	-
3.2(Antistatic V-belts)	-	3500	-
5(Requirements)	-	0	-
7.1(Fire Resistance Test)	-	5000	-
7.2(Electrical Resistance Test)	-	3500	-
7.3(Tensile Test)	-	4000	-
8(Designation)	-	0	-
9(Marking)	-	0	-
3.1(Fire Resistant Antistatic V-belts)	-	0	-
3.2(Antistatic V-belts)	-	0	-
5(Requirements)	-	0	-
7.1(Fire Resistance Test)	-	0	-
7.2(Electrical Resistance Test)	-	0	-
7.3(Tensile Test)	-	0	-
8(Designation)	-	0	-
9(Marking)	-	0	-

08 Feb, 2027

-
Included w.e.f 13.11.2025

4332

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	0	-
10.1(Elongation)	-	2000	-
10.1(Tensile Strength)	-	2500	-
8.0(Transmitting Capacities)	-	1500	-
7.2.2(Matched Belts - Code)	-	500	-
7.2.1(Matched Belts - Difference)	-	500	-
7.1(Belt Pitch Length)	-	1000	-
6.0(Designation)	-	2000	-
5 Table 2B(Cross sectional dimension)	-	1500	-
5 Table 2B(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	1500	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 2A(Cross sectional dimension)	-	0	-
5 Table 1(Cross sectional dimension)	-	1500	-
5 Table 1(Cross sectional dimension)	-	0	-
5 Table 1(Cross sectional dimension)	-	0	-
5 Table 1(Cross sectional dimension)	-	0	-
4.1(Material and Workmanship)	-	1000	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	0	-
4.1(Material and Workmanship)	-	0	-
7.2(Test Matched Belts)	-	0	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	1000	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	1000	-
Clause 5 Table 1(Nominal Height (T))	-	1000	-
Clause 5 Table 1(Nominal Included Angle (A))	-	1000	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	1000	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	5000	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

4333

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	0	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	0	-
Cl-6.2(Chemical analysis of the material)	-	0	-
Cl-7.1(General condition for delivery and inspection relating)	-	0	-
Cl-9(Ultimate tensile strength and elongation)	-	2000	-
Cl-10.1(Resistivity)	-	2000	-
Cl-10.1(electrical conductivity)	-	2500	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	0	-
Cl-11(Dimensions)	-	1000	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	500	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	6000	Includes all elements
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	0	-
Cl-6.2(Chemical analysis of the material)	-	0	-
Cl-7.1(General condition for delivery and inspection relating)	-	0	-
Cl-9(Ultimate tensile strength and elongation)	-	0	-
Cl-10.1(Resistivity)	-	0	-
Cl-10.1(electrical conductivity)	-	0	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	0	-
Cl-11(Dimensions)	-	0	-
Cl-13(Finish and freedom from defects)	-	0	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	0	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-

08 Feb, 2027

-
included w.e.f 05-01-2026

4334

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Materials)	-	1500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	2500	-
Cl 3.3(Fit)	-	1000	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	2000	-
Cl 4.1.3(Set After Ageing)	-	3000	-
Cl 4.1.4(Accelerated Ageing)	-	5000	-
Cl 5(AIR TIGHTNESS)	-	1500	-
Cl 6(MARKING)	-	0	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

4335

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Material And Workmanship)	-	1000	-
Cl 5.1(Cross-Section Dimensions)	-	6000	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	500	-
Cl 7(Length Measurement And Tolerances)	-	2500	-
Cl 7.2.1(Determination of Pitch Length)	-	2500	-
Cl 7.2.2(Determination of Pitch Length)	-	2500	-
Cl 7.2.3(Determination of Pitch Length)	-	2500	-
Cl 7.3(Matched Belts)	-	3000	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

4336

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking)	-	20000	-
13.1 (a)(Marking)	-	20000	-
13.1 (b)(Marking)	-	20000	-
13.1 (c)(Marking)	-	20000	-
13.1 (d)(Marking)	-	20000	-
13.1 (e)(Marking)	-	20000	-
13.1 (f)(Marking)	-	20000	-
13.1 (g)(Marking)	-	20000	-
13.1 (h)(Marking)	-	20000	-
13.1 (j)(Marking)	-	20000	-
13.2(Marking)	-	20000	-
13.4(Marking)	-	20000	-
3.1(Sizes )	-	20000	-
4.1(Rated Voltage)	-	20000	-
5.1(Rated frequency)	-	20000	-
6.1(Design and General Construction)	-	20000	-
6.3(Design and General Construction)	-	20000	-
6.3(Design and General Construction)	-	20000	-
6.4(Design and General Construction)	-	20000	-
6.5(Design and General Construction)	-	20000	-
6.6(Design and General Construction)	-	20000	-
6.7(Design and General Construction)	-	20000	-
6.9(Design and General Construction)	-	20000	-
6.1(Design and General Construction)	-	20000	-
6.11(Design and General Construction)	-	20000	-
6.12(Design and General Construction)	-	20000	-
7.1(Design and General Construction)	-	20000	-
8.1(Design and General Construction)	-	20000	-
9(Design and General Construction)	-	20000	-
10.1(Starting )	-	20000	-
11.1(Interchangeability)	-	20000	-
14.2 & 15.1(Air Delivery)	-	20000	-
14.3.A(Temperature-Rise (for motors))	-	20000	-
14.3.A(Temperature-Rise (for motors))	-	20000	-
14.3.A(Temperature-Rise (for motors))	-	20000	-
14.3.A(Temperature-Rise (for motors))	-	20000	-
14.3.B(Temperature-Rise (for regulators))	-	20000	-
14.3.B(Temperature-Rise (for regulators))	-	20000	-
14.3.B(Moistureproofness (for regulators only))	-	20000	-
14.3.B(Moistureproofness (for regulators only))	-	20000	-
14.5(Mechanical Endurance (for regulators only))	-	20000	-
14.1 & 14.6(Power factor)	-	20000	-
14.7(ac leakage)	-	20000	-
14.8(High voltage test)	-	20000	-
14.9(Insulation-Resistance)	-	20000	-
14.1(Earthing continuity)	-	20000	-
14.11 & 15.1(Electrical Input)	-	20000	-
14.12 & 16(Fan Speed)	-	20000	-
13.1(Marking)	-	20000	-
13.1 (a)(Marking)	-	20000	-
13.1 (b)(Marking)	-	20000	-
13.1 (c)(Marking)	-	20000	-
13.1 (d)(Marking)	-	20000	-
13.1 (e)(Marking)	-	20000	-
13.1 (f)(Marking)	-	20000	-
13.1 (g)(Marking)	-	20000	-
13.1 (h)(Marking)	-	20000	-
13.1 (j)(Marking)	-	20000	-
13.2(Marking)	-	20000	-
13.4(Marking)	-	20000	-
3.1(Sizes )	-	20000	-
4.1(Rated Voltage)	-	20000	-
5.1(Rated frequency)	-	20000	-
6.1(Design and General Construction)	-	20000	-
6.3(Design and General Construction)	-	20000	-
6.3(Design and General Construction)	-	20000	-
6.4(Design and General Construction)	-	20000	-
6.5(Design and General Construction)	-	20000	-
6.6(Design and General Construction)	-	20000	-
6.7(Design and General Construction)	-	20000	-
6.9(Design and General Construction)	-	20000	-
6.1(Design and General Construction)	-	20000	-
6.11(Design and General Construction)	-	20000	-
6.12(Design and General Construction)	-	20000	-
7.1(Design and General Construction)	-	20000	-
8.1(Design and General Construction)	-	20000	-
9(Design and General Construction)	-	20000	-
10.1(Starting )	-	20000	-
11.1(Interchangeability)	-	20000	-
14.2 & 15.1(Air Delivery)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.3(Temperature-Rise)	-	20000	-
14.4(Moistureproofness (for regulators only))	-	20000	-
14.4(Moistureproofness (for regulators only))	-	20000	-
14.5(Mechanical Endurance (for regulators only))	-	20000	-
14.1 & 14.6(Power factor)	-	20000	-
14.7(ac leakage)	-	20000	-
14.8(High voltage test)	-	20000	-
14.9(Insulation-Resistance)	-	20000	-
14.1(Earthing continuity)	-	20000	-
14.11 & 15.1(Electrical Input)	-	20000	-
14.12 & 16(Fan Speed)	-	20000	-
14.13(Flash Test)	-	20000	-
12(Silent Operation)	-	20000	-
Cl-16(Tolerances on ratings)	-	20000	-

08 May, 2028

-
Included w.e.f.29.09.2025

4337

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

29900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	500	-
5.3(Welding Defects)	-	1000	-
7.1(Material)	-	2500	-
7.1.2.1 & 7.1.2.2(Thickness)	-	1000	-
7.1.3(Coating Thickness)	-	1000	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	5000	-
7.1.4.3(O-Ring / Washer- Defects)	-	1000	-
7.2(Capacity)	-	1000	-
7.3(Heat Retention Capability)	-	1500	-
7.4(Cold Retention Capability)	-	1500	-
7.5.1(Drop Impact Test)	-	1500	-
7.5.2(Pendulum Impact Test)	-	1500	-
7.6(Fixing Strength of the Handle)	-	1000	-
7.7(Test for Strength of Shoulder Strap)	-	1000	-
7.8(Test for strength of cord)	-	1500	-
7.9(Leakage Test)	-	1500	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1500	-
7.13(Seepage test)	-	1500	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	2000	-
7.15(Test for length of the shoulder cap)	-	1500	-
7.16(Stability of Flask)	-	1000	-
7.17(Pour Test)	-	1500	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.3(Coating- Adhesion test)	-	1000	-
7.1.3(Coating - Thickness test)	-	1000	-
7.1.3(Coating- Salt water corrosion test)	-	1000	-
7.1.4.1(Stopper)	-	2500	-
7.1.4.2(O-ring/washer- Overall migration)	-	2500	-
7.1.4.2(O-ring/washer- Shore hardness)	-	1000	-
7.1.4.2(O-ring/washer- BPA)	-	5000	-
7.1.5(Auxillary closure)	-	2500	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	1000	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	3500	-
Cl-5.3(Welding Electrode)	-	2500	-
Cl.7.1.2.1(Test for leaching)	-	4500	-
Cl. 7.1.2.1(Sensorial Test)	-	1500	-
Cl-7.1.3, Table-1(Lead Limit)	-	1000	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

4338

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	1500	-
Clause 6(FREEDOM FROM DEFECTS)	-	1000	-
Clause 7 Sub-Clause 7.1(Material)	-	5500	-
Clause 10 Table 2(Preferred Thickness)	-	1000	-
Clause 11(Average Thickness)	-	1000	-
Clause 14(Surface condition)	-	1500	-
Clause 12(Dimension and Tolerances: I) Width)	-	500	-
Clause 12(Dimension and Tolerances: 2) Length)	-	500	-
9(Lubricants)	-	2500	-
13-(Table-5)(Tensile properties-IS 13237)	-	3500	-
7(Copper- IS 504)	-	0	-
Clause 7 Sub-Clause 7.2(Material)	-	0	-
7(Copper- IS 504)	-	0	-
7(Magnesium-IS 504)	-	0	-
7(Silicon- IS 504)	-	0	-
7(Iron-IS 504)	-	0	-
7(Manganese-IS 504)	-	0	-
7(Zinc-IS 504)	-	0	-
7(Titanium- IS 504)	-	0	-
7(Chromium- IS 504)	-	0	-
7(Cu+Si+Fe+Mn+Zn)	-	0	-
7(Cu+Mg+Si+Pe+Mn+Zn)	-	0	-
7(Cu+Mg+Si+Pe+Mn+Zn)	-	0	-

08 Feb, 2027

-
included w.e.f 09-12-2025.

4339

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 21 (2023)

Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 21 Infant Radiant Warmer First Revision

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing ME EQUIPMENT)	-	50000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	50000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	50000	-

05 Nov, 2029

-
"1 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) Electromagnetic compatibility of ME EQUIPMENTand ME SYSTEMS We don't have all EMI/EMCtesting facility 2 202 (Electromagnetic disturbances – Requirements and tests) Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS We don't have all EMI/EMCtesting facility"

4340

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

ALL

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	30000	-
5.3(Manufacture and Workmanship)	-	30000	-
7.1(Material)	-	30000	-
7.1.2(Thickness)	-	30000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	30000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	30000	-
7.1.2.8(Bisphenol A(BPA))	-	30000	-
7.3(Capacity)	-	30000	-
7.4(Heat Retention Capability)	-	30000	-
7.5(Cold Retention Capability)	-	30000	-
7.6.1(Drop Impact Test)	-	30000	-
7.6.2(Pendulum Impact Test)	-	30000	-
7.7(Fixing Strength of the Handle)	-	30000	-
7.8(Test for Strength of Shoulder Strap)	-	30000	-
7.9(Leakage Test)	-	30000	-
7.10(Joint Leak Test)	-	30000	-
7.11(Staining Test)	-	30000	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	30000	-
7.13.1(Length of the Shoulder Strap)	-	30000	-
7.13.2(Stability of Insulated Container)	-	30000	-
7.13.3(Cleaning)	-	30000	-
7.14(Seepage Test)	-	30000	-
9.1(Marking)	-	30000	-
9.2(BIS certification marking)	-	30000	-
10(Packaging)	-	30000	-
CLAUSE 5.2(Welding Defects)	-	30000	-
CLAUSE 7.1(Materials)	-	30000	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	30000	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	30000	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	30000	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	30000	-
CLAUSE 7.1.2.1(Adhesion Test)	-	30000	-
CLAUSE 7.1.2.1(Lead Limit)	-	30000	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	30000	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	30000	-
CLAUSE 7.3(Capacity)	-	30000	-
CLAUSE 7.4(Heat Retention Capability)	-	30000	-
CLAUSE 7.5(Cold Retention Capability)	-	30000	-
CLAUSE 7.6.1(Drop Impact)	-	30000	-
CLAUSE 7.6.2(Pendulum Impact)	-	30000	-
CLAUSE 7.7(Fixing Strength of Handle)	-	30000	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	30000	-
CLAUSE 7.9(Leakage Test)	-	30000	-
CLAUSE 7.10(Joint Leak Test)	-	30000	-
CLAUSE 7.11(Staining Test)	-	30000	-
CLAUSE 7.12(Checking of PUF insulation)	-	30000	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	30000	-
CLAUSE 7.13.2(Stability of Flask)	-	30000	-
CLAUSE 7.1.1(Material - inner container)	-	30000	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	30000	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	30000	-
Cl 7.1.2.2(Polymer - test for BPA)	-	30000	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	30000	-
Cl 7.1.2.4(Silicon gasket - defects)	-	30000	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	30000	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	30000	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	30000	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	30000	-
Cl 7.1.2.5(Thickness of steel rim)	-	30000	-
Cl 7.1.2.5(Thickness of glass lid)	-	30000	-
Cl 7.1.2.6(Thermal insulating material)	-	30000	-
Cl 7.1.2.7(Additional lid)	-	30000	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	30000	-
Cl 7.1.2.9(Internal utensils- material)	-	30000	-
Cl 7.1.2.9(Internal utensils- thickness)	-	30000	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	30000	-
Cl 7.1.2.9(Test for BPA)	-	30000	-
CLAUSE 7.1.2.3(Outer container or lid - material)	-	30000	-

08 May, 2028

-
Included w.e.f. 12.11.2025

4341

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	0	-
7.1.1(Material- Inner containers)	-	1500	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-
7.1.2.1(Coating - Limit of lead)	-	1500	-
7.1.2.1(Coating - Limit of Cadmium)	-	1500	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	5500	-
7.3(Capacity)	-	1000	-
7.4(Heat Retention Capability)	-	1500	-
7.5(Cold Retention Capability)	-	1500	-
7.6.1(Drop Impact Test)	-	1500	-
7.6.2(Pendulum Impact Test)	-	1500	-
7.7(Fixing Strength of the Handle)	-	1500	-
7.8(Test for Strength of Shoulder Strap)	-	1500	-
7.8.1(Test for strength of cord)	-	1500	-
7.9(Leakage Test)	-	2000	-
7.10(Joint Leak Test)	-	1000	-
7.11(Staining Test)	-	1500	-
7.12(Length of the Shoulder Strap)	-	1500	-
7.13(Stability of Flask/Bottle)	-	1000	-
7.14(Pour Test)	-	1500	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.2(Outer protective case and accessories - Material)	-	1500	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	1500	-
7.2(Arrangement for holding and suspension)	-	1000	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	6500	-
7.1.3(Overall migration)	-	3500	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	5500	-
7.1.3(Stopper Material)	-	3500	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1.1(Material- Inner containers)	-	0	-
7.1.2(Outer protective case and accessories - Thickness)	-	0	-
7.1.2.1(Coating - Limit of lead)	-	0	-
7.1.2.1(Coating - Limit of Cadmium)	-	0	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.8.1(Test for strength of cord)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12(Length of the Shoulder Strap)	-	0	-
7.13(Stability of Flask/Bottle)	-	0	-
7.14(Pour Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.2(Outer protective case and accessories - Material)	-	0	-
7.1.2.1(Coating- Thickness test)	-	0	-
7.1.2.1(Coating- Adhesion test)	-	0	-
7.1.2.1(Coating- Salt Water corrosion test)	-	0	-
7.2(Arrangement for holding and suspension)	-	0	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	0	-
7.1.3(Overall migration)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	0	-
7.1.3(Stopper Material)	-	0	-
5(Manufacture and Workmanship)	-	0	-
5.3(Manufacture and Workmanship)	-	0	-
7.1.1(Material- Inner containers)	-	0	-
7.1.2(Outer protective case and accessories - Thickness)	-	0	-
7.1.2.1(Coating - Limit of lead)	-	0	-
7.1.2.1(Coating - Limit of Cadmium)	-	0	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	0	-
7.3(Capacity)	-	0	-
7.4(Heat Retention Capability)	-	0	-
7.5(Cold Retention Capability)	-	0	-
7.6.1(Drop Impact Test)	-	0	-
7.6.2(Pendulum Impact Test)	-	0	-
7.7(Fixing Strength of the Handle)	-	0	-
7.8(Test for Strength of Shoulder Strap)	-	0	-
7.8.1(Test for strength of cord)	-	0	-
7.9(Leakage Test)	-	0	-
7.10(Joint Leak Test)	-	0	-
7.11(Staining Test)	-	0	-
7.12(Length of the Shoulder Strap)	-	0	-
7.13(Stability of Flask/Bottle)	-	0	-
7.14(Pour Test)	-	0	-
9.1(Marking)	-	0	-
9.2(BIS certification marking)	-	0	-
10(Packaging)	-	0	-
7.1.2(Outer protective case and accessories - Material)	-	0	-
7.1.2.1(Coating- Thickness test)	-	0	-
7.1.2.1(Coating- Adhesion test)	-	0	-
7.1.2.1(Coating- Salt Water corrosion test)	-	0	-
7.2(Arrangement for holding and suspension)	-	0	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	0	-
7.1.3(Overall migration)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	0	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	0	-
7.1.3(Stopper Material)	-	0	-

08 Feb, 2027

-
Included w.e.f 13.11.2025

4342

Alpha Test House Private Limited, Delhi

8131026

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

720000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	11700	-
Cl-4.3(Short-circuit and overload protection)	-	11700	-
Cl-4.3.101(AC input current)	-	11700	-
Cl-4.3.102(Transformer protection)	-	11700	-
Cl-4.3.103(AC input short-circuit current)	-	11700	-
Cl-4.3.104(Protection of the energy storage device)	-	1000	-
Cl-4.3.105(Unsynchronised load transfer)	-	11700	-
Cl-4.4(Protection against electric shock)	-	11700	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	11700	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	11700	-
Cl-4.4.7.1.1(Influencing factors)	-	11700	-
Cl-4.4.7.1.2(Pollution degree)	-	1000	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	11700	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	11700	-
Cl-4.4.9(Capacitor discharge)	-	11700	-
Cl-4.5.2(Service access areas)	-	11700	-
Cl-4.6(Protection against fire and thermal hazards)	-	11700	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	11700	-
Cl-4.6.3.1(General)	-	11700	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	11700	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	11700	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	11700	-
Cl- 4.6.5(Limited power sources)	-	11700	-
Cl-4.7(Protection against mechanical hazards)	-	11700	-
Clause 4(Protection against hazards)	-	1000	-
Cl-4.7.101(Protection in service access area)	-	1000	-
Clause 5(Test requirements)	-	1000	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	1000	-
Clause 5.2.2(Mechanical tests)	-	11700	-
Clause 5.2.3(Electrical tests)	-	11700	-
Cl-4.9(Protection against environmental stresses)	-	11700	-
Cl-4.10(Protection against sonic pressure hazards)	-	11700	-
Clause 5.2.4("Abnormal operation tests")	-	11700	-
Cl-4.11(Wiring and connections)	-	11700	-
Clause 5.2.5(Material tests)	-	11700	-
Clause 5.2.6(Environmental tests)	-	11700	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	11700	-
Clause 5.2.7(Hydrostatic pressure test)	-	11700	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	11700	-
Clause 6(Information and marking requirements)	-	11700	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	1000	-
Clause 6.1.101(Durability)	-	11700	-
Cl-4.101.2(Normal disconnect devices)	-	1000	-
Cl-4.102.1(Stored energy source- General)	-	1000	-
Cl-4.102.2(Accessibility and maintainability)	-	1000	-
Cl-4.102.3(Distance between battery cells)	-	1000	-
Cl- 4.102.5(Electrolyte spillage)	-	1000	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	11700	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	11700	-
Cl- 4.102.8.2(Location of protective devices)	-	11700	-
Cl-4.102.8.3(Rating of protective devices)	-	1000	-
Cl-4.103(UPS connection to telecommunication lines)	-	1000	-
Cl-5.1.5.3(Operating parameters for tests)	-	1000	-
Cl-5.1.7(Test overview)	-	1000	-
Cl-5.2.2.2(Non-accessibility test)	-	11700	-
Cl-5.2.2.4.4(Drop test)	-	11700	-
Cl-4.8.102(Backfeed protection)	-	11700	-
Cl- 4.102.7(Charging voltages)	-	1000	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	11700	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	11700	-
Cl-5.2.2.101(Cord guard test)	-	11700	-
Cl-5.2.3.9(Limited power source test)	-	11700	-
Cl-5.2.3.10(Temperature rise test)	-	11700	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	11700	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	11700	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	11700	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	11700	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	1000	-
Cl-5.2.3.102(Input current test)	-	11700	-
Cl-5.2.3.103(Short-time withstand current test)	-	11700	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	11700	-
Cl-5.2.3.104(Transformer protection test)	-	11700	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	11700	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	11700	-
Cl-5.2.6.4(Vibration test)	-	11700	-
Cl-5.2.6.5(Salt mist test)	-	11700	-
Cl-5.2.6.6(Dust and sand test)	-	11700	-
Cl-6(Information and marking requirements)	-	11700	-

-
Included w.e.f 19.09.2025

4343

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 16242 : Part 1 (2025)

Uninterruptible power systems UPS Part 1 Safety requirements (first revision)

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Fault and abnormal conditions)	-	25000	-
Cl-4.3(Short-circuit and overload protection)	-	2000	-
Cl-4.3.101(AC input current)	-	25000	-
Cl-4.3.102(Transformer protection)	-	1000	-
Cl-4.3.103(AC input short-circuit current)	-	1000	-
Cl-4.3.104(Protection of the energy storage device)	-	1000	-
Cl-4.3.105(Unsynchronised load transfer)	-	1000	-
Cl-4.4(Protection against electric shock)	-	1000	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	2000	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	500	-
Cl-4.4.7.1.1(Influencing factors)	-	500	-
Cl-4.4.7.1.2(Pollution degree)	-	2500	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	500	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	500	-
Cl-4.4.9(Capacitor discharge)	-	500	-
Cl-4.5.2(Service access areas)	-	500	-
Cl-4.6(Protection against fire and thermal hazards)	-	25000	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	1500	-
Cl-4.6.3.1(General)	-	500	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	500	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	500	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	25000	-
Cl- 4.6.5(Limited power sources)	-	3500	-
Cl-4.7(Protection against mechanical hazards)	-	25000	-
Clause 4(Protection against hazards)	-	1500	-
Cl-4.7.101(Protection in service access area)	-	1500	-
Clause 5(Test requirements)	-	1500	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	1500	-
Clause 5.2.2(Mechanical tests)	-	1500	-
Clause 5.2.3(Electrical tests)	-	25000	-
Cl-4.9(Protection against environmental stresses)	-	25000	-
Cl-4.10(Protection against sonic pressure hazards)	-	1000	-
Clause 5.2.4("Abnormal operation tests")	-	1500	-
Cl-4.11(Wiring and connections)	-	500	-
Clause 5.2.5(Material tests)	-	1000	-
Clause 5.2.6(Environmental tests)	-	1500	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	1000	-
Clause 5.2.7(Hydrostatic pressure test)	-	1000	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	500	-
Clause 6(Information and marking requirements)	-	500	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	500	-
Clause 6.1.101(Durability)	-	500	-
Cl-4.101.2(Normal disconnect devices)	-	500	-
Cl-4.102.1(Stored energy source- General)	-	500	-
Cl-4.102.2(Accessibility and maintainability)	-	500	-
Cl-4.102.3(Distance between battery cells)	-	500	-
Cl- 4.102.5(Electrolyte spillage)	-	500	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	500	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	500	-
Cl- 4.102.8.2(Location of protective devices)	-	500	-
Cl-4.102.8.3(Rating of protective devices)	-	500	-
Cl-4.103(UPS connection to telecommunication lines)	-	500	-
Cl-5.1.5.3(Operating parameters for tests)	-	500	-
Cl-5.1.7(Test overview)	-	500	-
Cl-5.2.2.2(Non-accessibility test)	-	500	-
Cl-5.2.2.4.4(Drop test)	-	500	-
Cl-4.8.102(Backfeed protection)	-	500	-
Cl- 4.102.7(Charging voltages)	-	500	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	500	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	500	-
Cl-5.2.2.101(Cord guard test)	-	500	-
Cl-5.2.3.9(Limited power source test)	-	500	-
Cl-5.2.3.10(Temperature rise test)	-	25000	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	500	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	500	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	500	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	500	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	500	-
Cl-5.2.3.102(Input current test)	-	25000	-
Cl-5.2.3.103(Short-time withstand current test)	-	500	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	500	-
Cl-5.2.3.104(Transformer protection test)	-	500	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	500	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	500	-
Cl-5.2.6.4(Vibration test)	-	3000	-
Cl-5.2.6.5(Salt mist test)	-	15000	-
Cl-5.2.6.6(Dust and sand test)	-	15000	-
Cl-6(Information and marking requirements)	-	500	-
Cl-4.2(Fault and abnormal conditions)	-	0	-
Cl-4.3(Short-circuit and overload protection)	-	0	-
Cl-4.3.101(AC input current)	-	0	-
Cl-4.3.102(Transformer protection)	-	0	-
Cl-4.3.103(AC input short-circuit current)	-	0	-
Cl-4.3.104(Protection of the energy storage device)	-	0	-
Cl-4.3.105(Unsynchronised load transfer)	-	0	-
Cl-4.4(Protection against electric shock)	-	0	-
Cl-4.4.2.2.2(Selection tables for contact area and skin humidity condition)	-	0	-
Cl-4.4.3.3(Protection by means of enclosures or barriers- Openings)	-	0	-
Cl-4.4.7.1.1(Influencing factors)	-	0	-
Cl-4.4.7.1.2(Pollution degree)	-	0	-
Cl-4.4.7.1.3(Overvoltage category (OVC))	-	0	-
Cl-4.4.7.7(PWB spacings for functional insulation)	-	0	-
Cl-4.4.9(Capacitor discharge)	-	0	-
Cl-4.5.2(Service access areas)	-	0	-
Cl-4.6(Protection against fire and thermal hazards)	-	0	-
Cl-4.6.2.2(Components within a circuit representing a fire hazard)	-	0	-
Cl-4.6.3.1(General)	-	0	-
Cl-4.6.3.2(Flammability of enclosure materials)	-	0	-
Cl-4.6.3.3.2(Openings in the top and side of fire enclosures)	-	0	-
Cl-4.6.4.1(Temperature limits- Internal parts)	-	0	-
Cl- 4.6.5(Limited power sources)	-	0	-
Cl-4.7(Protection against mechanical hazards)	-	0	-
Clause 4(Protection against hazards)	-	0	-
Cl-4.7.101(Protection in service access area)	-	0	-
Clause 5(Test requirements)	-	0	-
Cl-4.8 .101(Equipment with multiple sources of supply- General)	-	0	-
Clause 5.2.2(Mechanical tests)	-	0	-
Clause 5.2.3(Electrical tests)	-	0	-
Cl-4.9(Protection against environmental stresses)	-	0	-
Cl-4.10(Protection against sonic pressure hazards)	-	0	-
Clause 5.2.4("Abnormal operation tests")	-	0	-
Cl-4.11(Wiring and connections)	-	0	-
Clause 5.2.5(Material tests)	-	0	-
Clause 5.2.6(Environmental tests)	-	0	-
Cl-4.11.101.1(Non-detachable cords- Cord guard)	-	0	-
Clause 5.2.7(Hydrostatic pressure test)	-	0	-
Cl-4.11.101.2(Cord anchorages and strain relief)	-	0	-
Clause 6(Information and marking requirements)	-	0	-
Cl-4.101.1(Emergency switching (disconnect) device)	-	0	-
Clause 6.1.101(Durability)	-	0	-
Cl-4.101.2(Normal disconnect devices)	-	0	-
Cl-4.102.1(Stored energy source- General)	-	0	-
Cl-4.102.2(Accessibility and maintainability)	-	0	-
Cl-4.102.3(Distance between battery cells)	-	0	-
Cl- 4.102.5(Electrolyte spillage)	-	0	-
Cl- 4.102.6(Ventilation and hydrogen concentration)	-	0	-
Cl- 4.102.8.1(Overcurrent and earth fault protection)	-	0	-
Cl- 4.102.8.2(Location of protective devices)	-	0	-
Cl-4.102.8.3(Rating of protective devices)	-	0	-
Cl-4.103(UPS connection to telecommunication lines)	-	0	-
Cl-5.1.5.3(Operating parameters for tests)	-	0	-
Cl-5.1.7(Test overview)	-	0	-
Cl-5.2.2.2(Non-accessibility test)	-	0	-
Cl-5.2.2.4.4(Drop test)	-	0	-
Cl-4.8.102(Backfeed protection)	-	0	-
Cl- 4.102.7(Charging voltages)	-	0	-
Cl-5.2.2.6.101(Wall or ceiling mounted equipment test)	-	0	-
Cl-5.2.2.6.102(Rack mounted equipment test)	-	0	-
Cl-5.2.2.101(Cord guard test)	-	0	-
Cl-5.2.3.9(Limited power source test)	-	0	-
Cl-5.2.3.10(Temperature rise test)	-	0	-
Cl-5.2.3.101.1(Backfeed protection test- General)	-	0	-
Cl-5.2.3.101.2(Test for pluggable UPS)	-	0	-
Cl-5.2.3.101.3(Test for permanently connected UPS)	-	0	-
Cl-5.2.3.101.4(Method to simulate the load-induced change of reference potential for pluggable UPS)	-	0	-
Cl-5.2.3.101.5(Solid-state backfeed protection)	-	0	-
Cl-5.2.3.102(Input current test)	-	0	-
Cl-5.2.3.103(Short-time withstand current test)	-	0	-
Cl-5.2.3103.3(Input port short-time withstand current rating)	-	0	-
Cl-5.2.3.104(Transformer protection test)	-	0	-
Cl- 5.2.3.105(Unsynchronised load transfer test)	-	0	-
Cl-5.2.4.1(Abnormal operation and simulated faults tests- General)	-	0	-
Cl-5.2.6.4(Vibration test)	-	0	-
Cl-5.2.6.5(Salt mist test)	-	0	-
Cl-5.2.6.6(Dust and sand test)	-	0	-
Cl-6(Information and marking requirements)	-	0	-

-
Included w.e.f. 04.11.2025

4344

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Marking)	-	500	-
11(Marking)	-	0	-
11(Marking)	-	0	-
11(Marking)	-	0	-
11(Marking)	-	0	-
11(Marking)	-	0	-
11(Marking)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
12(Packing)	-	0	-
13(Accessories)	-	0	-
13(Accessories)	-	0	-
6(Nominal Sizes)	-	1000	-
6(Nominal Sizes)	-	0	-
8(Essential Requirements)	-	3000	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
8(Essential Requirements)	-	0	-
9(Finish)	-	500	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
9(Finish)	-	0	-
10Annex B(Test)	-	0	-
B-1.2(a) Visual Inspection)	-	250	-
B-1.3(b) Surface)	-	250	-
B-1.3(b) Surface)	-	250	-
B-1.4(c) Performance Requirements)	-	2000	-
B-1.4(c) Performance Requirements)	-	0	-
B-1.4(c) Performance Requirements)	-	0	-
B-1.4(c) Performance Requirements)	-	0	-
B-1.5(d) Endurance Test)	-	3000	-
B-1.5(d) Endurance Test)	-	0	-
B-1.5(d) Endurance Test)	-	0	-
B-1.5(d) Endurance Test)	-	0	-
B-1.5(d) Endurance Test)	-	0	-
B-1.5(d) Endurance Test)	-	0	-
Cl. 7 Table 2(Materials)	-	0	-
Clause 7 (Table 2 - xvii)(Material for Top lid)	-	500	-
Clause 7 (Table 2 - xvi)(Material for Pawl)	-	500	-
Clause 7 (Table 2 - xv)(Material for Top nut)	-	500	-
Clause 7 (Table 2 - xiv)(Material for Main arm bolt)	-	500	-
Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland )	-	500	-
Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft )	-	500	-
Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) )	-	500	-
Clause 7 (Table 2 - x)(Material for Clamp)	-	500	-
Clause 7 (Table 2 - ix)(Material for Main arm )	-	500	-
Clause 7 (Table 2 - viii)(Material for Adjusting arm)	-	500	-
Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic)	-	500	-
Clause 7 (Table 2 - vi)(Material for Control valve screw)	-	500	-
Clause 7 (Table 2 - v)(Material for Material for Packing/washers)	-	500	-
Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion)	-	500	-
Clause 7 (Table 2 - iii)(Material for Nuts)	-	500	-
Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring)	-	500	-

08 Feb, 2027

-
Included w.e.f.12.09.2025

4345

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

23600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1(Te)	-	12000	Including all elements
5.1 Table-1(Se)	-	0	-
5.1 Table-1(Bi)	-	0	-
5.1 Table-1(Se+Te+Bi)	-	0	-
5.1 Table-1(Sb)	-	0	-
5.1 Table-1(As)	-	0	-
5.1 Table-1(Sn)	-	0	-
5.1 Table-1(Pb)	-	0	-
5.1 Table-1(Fe)	-	0	-
5.1 Table-1(Ni)	-	0	-
5.1 Table-1(S)	-	0	-
5.1 Table-1(Ag)	-	0	-
5.1 Table-1(O)	-	0	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	0	-
6.1(Dimension)	-	1500	-
6.2.2(Ovality)	-	500	-
7.0(Freedom from Defects)	-	1000	-
8.1(Tensile Strength)	-	2500	-
8.2(Surface Compression Test)	-	1500	-
Cl-9.1, Table-4(Volume Resistivity)	-	3000	-
Cl-9.1, Table-4(Mass Resistivity)	-	3000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	3000	-
7.2(Surface Oxide)	-	2000	-
10.5(Microscopic Examination)	-	2000	-
9.2.1.1(Electrical Properties)	-	0	-
9.2.1.2(Electrical Properties)	-	0	-
9.2.1.3(Electrical Properties)	-	0	-
13(Mechanical Strength)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.2(Electrical Properties)	-	0	-

08 Feb, 2027

-
Included w.e.f 05.12.2025

4346

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	1000	-
Clause - 7.1(SULPHUR)	-	1000	-
Clause - 7.1(PHOSPHURS)	-	1000	-
Clause - 7.1(MANGANESE)	-	1000	-
Clause - 7.1(NITROGEN)	-	1000	-
As per Clause 10(Dimension)	-	0	-
As per Clause 10.1(Dimension Width)	-	250	-
As per Clause 10.1(Dimension Thickness)	-	250	-
As per Clause 10.2(Dimension Length)	-	250	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	0	-
As per Clause 11.5(Bend)	-	1000	-
As per Clause 11.6(Camber)	-	250	-
As per Clause 11.7 (i)(Out of Square)	-	250	-
As per Clause 11.7 (ii)(Round Corners)	-	250	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	250	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	250	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	250	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	250	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	250	-
As per Clause 11.7 (ix)(Scarfing pits)	-	500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	-
Clause. 13(Macro examination test.)	-	1500	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	2500	-
Clause. 13(Inclusion content)	-	2500	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	1000	-
Clause.7.1(Carbon Equbalant)	-	500	-
Clause.7.1(Microalloy element)	-	500	-
Clause - 7.1(CARBON)	-	0	-
Clause - 7.1(SULPHUR)	-	0	-
Clause - 7.1(PHOSPHURS)	-	0	-
Clause - 7.1(MANGANESE)	-	0	-
Clause - 7.1(NITROGEN)	-	0	-
As per Clause 10(Dimension)	-	0	-
As per Clause 10.1(Dimension Width)	-	0	-
As per Clause 10.1(Dimension Thickness)	-	0	-
As per Clause 10.2(Dimension Length)	-	0	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	0	-
As per Clause 11.5(Bend)	-	0	-
As per Clause 11.6(Camber)	-	0	-
As per Clause 11.7 (i)(Out of Square)	-	0	-
As per Clause 11.7 (ii)(Round Corners)	-	0	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	0	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	0	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	0	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	0	-
As per Clause 11.7 (ix)(Scarfing pits)	-	0	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	0	-
Clause. 13(Inclusion content)	-	0	-
Clause. 14(Marking)	-	0	-
Clause.15(Ordering information)	-	0	-
Clause.6.0(Manufacture)	-	0	-
Clause.7.1(Silicon)	-	0	-
Clause.7.1(Carbon Equbalant)	-	0	-
Clause.7.1(Microalloy element)	-	0	-

08 Feb, 2027

-
Included w.e.f 13.11.2025

4347

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Nominal Size)	-	500	-
(Cl. 7)(Identification)	-	500	-
(Cl. 7)(Identification)	-	0	-
(Cl. 4)(Materials)	-	1500	-
(Cl.6 , Table 3)(Dimensions)	-	1500	-
(Cl 8)(Construction,Workmanship and Finish)	-	500	-
(Cl 8)(Construction,Workmanship and Finish)	-	0	-
(Cl 8)(Construction,Workmanship and Finish)	-	0	-
(Cl 8)(Construction,Workmanship and Finish)	-	0	-
(Cl 8)(Construction,Workmanship and Finish)	-	0	-
(Cl 8.4)(Minimum Thickness)	-	500	-
(Cl. 8.5)(Finish)	-	500	-
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	2000	-
(Cl 9.2)(Drip Proofness Test)	-	3000	-
(Cl 9.3)(Thermal Shock Test )	-	2500	-
(Cl 9.4)(Hydraulic Pressure Test)	-	2500	-
(Cl 9.5)(Mechanical Strength Characteristics)	-	2500	-

08 Feb, 2027

-
Included w.e.f. 12.11.2025

4348

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

18800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	1000	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	5000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	2000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	2000	-
Cl-6.3(Safety Requirements)	-	1500	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	5000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	4000	-
Cl-6.5(Corrosion Resistance)	-	4000	-
Cl-6.6(Fire Resistance Test)	-	6000	-
Cl-8(Marking)	-	500	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

4349

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 15769 (2008)

Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Radiographic Soundness Test)	-	6500	-
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	5000	-
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	4000	-
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	4000	-
5.6(Longitudinal Bend Test)	-	3000	-
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	7500	-
5.8 (Table No.- 15)(Chemical Composition,%)	-	5000	-
5.2(Radiographic Soundness Test)	-	0	-
5.3 (Table No.- 1)(Tensile Test(T.S., Y.S. & El), Mpa-IS 1608)	-	0	-
5.4 (Table No.- 2)(Impact Test,J- IS 1757)	-	0	-
5.5 (Table No.- 1)(Transverse Tensile Test,Mpa (T.S., Y.S. & El))	-	0	-
5.6(Longitudinal Bend Test)	-	0	-
5.7(Diffusible Hydrogen Test,ml/100g- IS 11802)	-	0	-
5.8 (Table No.- 15)(Chemical Composition,%)	-	0	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

4350

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Materials)	-	2000	-
7.1.1(copper bottle - copper)	-	500	-
7.1.1(copper bottle – lead)	-	500	-
7.1.1(copper bottle – bismuth)	-	500	-
7.1.1(copper bottle – oxygen)	-	500	-
7.1.1(copper bottle – total impurities)	-	1000	-
7.1.3.3(o-ring or washer - Defects)	-	500	-
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	1500	-
7.1.8(Anodic coating)	-	1000	-
7.1.8(Hard Anodized)	-	1000	-
7.1.9(External coating– Limit of Lead)	-	1000	-
7.1.9(External coating– Limit of Cadmium)	-	1000	-
7.2(Capacity)	-	500	-
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	1500	-
7.4(Test for strength of shoulder strap)	-	1000	-
7.5(Test for cord)	-	500	-
7.7(Leakage test)	-	500	-
7.8(Staining test)	-	1000	-
7.9(Lever, device for operating or Regulating flow test)	-	1000	-
7.10(Stability test)	-	500	-
7.11(Load test)	-	500	-
7.12(Food safe test/Leaching test)	-	2000	-
7.12(Water potability)	-	1000	-
7.13(Turbidity)	-	1000	-
7.13(pH value)	-	500	-
7.13(Taste threshold)	-	500	-
7.13(Colour, Hazen units)	-	1000	-
7.13(Odour)	-	500	-
7.13(Total dissolved solids)	-	1000	-
9.1(Marking)	-	500	-
7.1.3(Overall Migration test (IS 9845 : 1998))	-	2000	-
Cl. 7.1.5(PERFORMANCE TEST (Lever device ))	-	1500	-
7.1.1.1(copper bottle – Thickness)	-	500	-
7.1.2.1(Stainless steel bottle (thickness))	-	500	-
7.1.2.1(Stainless steel bottle (material))	-	2000	-
7.1.2 Note 2(Aluminium bottle (Material))	-	2000	-
7.1.3.1(Stopper Material)	-	1500	-
7.1.3.2(o-ring or washer Overall migration)	-	2000	-
7.1.4(Auxillary closure - Material)	-	2000	-
7.1.9(External coating - Thickness test)	-	500	-
7.1.9(External coating - Salt water corrosion test)	-	1500	-
7.1.9(External coating - Adhesion test)	-	1000	-
7.3.1.3 (Amendment 1)(Drop impact test - Free fall test)	-	1000	-
7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang)	-	1000	-
7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang)	-	1000	-
Cl 7.6(Test for cord chain)	-	1000	-
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test)	-	1000	-
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel)	-	2000	-

08 Feb, 2027

-
Included w.e.f 04.11.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number