BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4531

IEC TEST LABS LLP

8165726

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1020000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	5000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	10000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	3000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	100000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
11.2.2(Spark Test)	-	10000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	100000	-
11.2.5(Surface Resistance of Sheath)	-	10000	-
11.3.1(Sheath Colour)	-	2000	-
11.3.2(Sheath Marking)	-	2000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	10000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	700000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	50000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	50000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	2000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	2000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	10000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	10000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	20000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	20000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	20000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	20000	-
Annex - B of IS 17293:2020(Compatibility test)	-	20000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	30000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	20000	-
11.2.5(Surface Resistance of Sheath)	-	20000	-
11.3.1(Sheath Colour)	-	1000	-
11.3.2(Sheath Marking)	-	1000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	20000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	20000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	20000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	500000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	10000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	10000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	1000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	30000	-

07 Sep, 2026

-
Included w.e.f.29.07.2025

4532

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

PVC Geomembrane

175080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	500	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1000	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	-
5,Table 1(Tear resistance (machine direction))	-	2000	-
5,Table 1(Tear resistance (Cross direction))	-	2000	-
5,Table 1(Index puncture resistance,N)	-	2700	-
5,Table 1(Low temperature crack resistance)	-	2000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	0	Test not available
5,Table 1(Seam strength,kg,Min)	-	2000	-
5,Table 1(Volatile Loss ,% ,Max)	-	760	-
5,Table 1(Peel strength,kN/m,Min)	-	1500	-
5,Table 1(Resistance to soil burial)	-	25000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	-
5,Table 1(Tensile strength (Transverse),% change)	-	1500	-
5,Table 1(Water extraction,% loss in weight)	-	1000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	104000	-
5, Table-2(Behaviour during perforation)	-	2700	-
5, Table-2(Dimensional Stability at 80 degree C)	-	2000	-
5, Table-2(Change in length after heating)	-	2000	-
5, Table-2(Resistance to acid and alkali)	-	10500	-
5, Table-2(Resistance to static puncturing)	-	2700	-
5, Table-2(Horizontal rate of burning)	-	1410	-
5, Table-2(Vertical rate of burning)	-	1810	-
4.0(Types)	-	0	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0	Already Given
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0	Already Given
5,Table 1(Elongation at break (Longitudinal),% change)	-	0	Already Given
5,Table 1(Elongation at break (Transverse),% change)	-	0	Already Given
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0	Already Given
6.0(Dimensions and tolerances)	-	0	Already Given
5, Table-2(Length)	-	0	Already Given
5, Table-2(Width)	-	0	Already Given
5, Table-2(Thickness at 20kPa pressure)	-	0	Already Given
5, Table-2(Tensile Strength (Longitudinal))	-	0	Already Given
5, Table-2(Tensile Strength (Transverse))	-	0	Already Given
5, Table-2(Elongation at break (Longitudinal))	-	0	Already Given
5, Table-2(Elongation at break (Transverse))	-	0	Already Given
5, Table-2(Tear Strength (Machine direction))	-	0	Already Given
5, Table-2(Tear Strength (Cross direction))	-	0	Already Given
5, Table-2(Height of fall without perforation)	-	0	Test not available
5, Table-2(Cold crack resistance at low temperature)	-	0	Already Given
5, Table-2(Hydrostatic Pressure Resistance)	-	0	Test not available
5, Table-2(Change in width after heating)	-	0	Already Given
5, Table-2(Strength of welded seam shear resistance)	-	0	Already Given
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	0	Already Given
7.2(Colour ,Surface characteristics and fredom from defects)	-	0	Already Given
5,Table 2(Specific Gravity)	-	0	Already Given
5,Table 1(Specific Gravity)	-	0	Already Given
5,Table 2(Specific Gravity)	-	0	Already Given

-
Included w.e.f.28.07.2025

4533

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

from 66 kV to 220 kV

446500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	12500	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	10000	-
19.1 b) IV)(Hot set test)	-	6500	-
19.1 b) V)(Shrinkage test)	-	3500	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3500	-
20.6(Tests for armouring material : Dimensions)	-	3500	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5500	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2500	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3500	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	32000	10% Discount to BIS
20.9.1(Thermal ageing on complete cable sample)	-	12500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	7500	-
20.11.1(Bending test followed by P D test)	-	60000	10% Discount to BIS
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	18500	10% Discount to BIS
20.13(Dielectric power factor measurement at elevated temperature)	-	18500	-
20.14.1(Load cycle test followed by P.D measurement)	-	75000	10% Discount to BIS
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	65000	10% Discount to BIS
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	4000	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	4000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	4000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	25000	10% Discount to BIS
20.18(Measurement of Capacitance)	-	25000	10% Discount to BIS
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	0	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	0	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	0	-
19.1 A) II)(Tests on conductor : Resistance test)	-	0	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	0	-
19.1 b) II)(Tensile strength and elongation at break)	-	0	-
19.1 b) III)(Thermal ageing in air oven)	-	0	-
19.1 b) IV)(Hot set test)	-	0	-
19.1 b) V)(Shrinkage test)	-	0	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	0	-
20.4(Test for concentric copper tape)	-	0	-
20.5(Thickness of metallic sheath)	-	0	-
20.6(Tests for armouring material : Dimensions)	-	0	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	0	-
Table 9, (Measurement of thickness)	-	0	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	0	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	0	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	0	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	0	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	0	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	0	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	0	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	0	-
20.8.3(Water tightness test)	-	0	-
20.9.1(Thermal ageing on complete cable sample)	-	0	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	0	-
20.11.1(Bending test followed by P D test)	-	0	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	0	-
20.13(Dielectric power factor measurement at elevated temperature)	-	0	-
20.14.1(Load cycle test followed by P.D measurement)	-	0	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	0	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	0	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	0	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	0	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	0	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	0	-
20.18(Measurement of Capacitance)	-	0	-

11 Apr, 2028

-
Included w.e.f.16.07.2025

4534

The National Small Industries Corporation Ltd (NSIC), Chennai

6135404

IS 6595 : Part 2 (2024)

Horizontal Centrifugal Pump for Clear, Cold Water Part 2 General Purpose (Other than Agricultural and Rural Water Supply) â Specification (Third Revision)

0.18 kW - 110 kW

5760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1 (i)(Casing)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.1 (ii)(Impeller)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.1 (iii)(Casing ring and impeller ring)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.1 (iv)(Shaft)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.1 (v)(Shaft sleeve (if provided))	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.1 (vi)(Bush)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-6.2(Gasket, Seals and Packings)	-	5759.99	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-7(Direction of rotation)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-8(Design Limiation)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-9.1(Volute Casing)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-9.2(Impeller)	-	5759.99	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-9.3(Shaft)	-	5759.99	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-9.4(DESIGN LIMITATIONS)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-10(Pump Test)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-12.1(Guarantee of Workmanship and Material)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-12.3(PUMP TEST)	-	5759.99	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-14(Marking)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-
Cl-12.2(Guarantee of Performance)	-	5760	0.37 KW-7.5 KW-5760/-, 7.51 KW-11 KW-6480/-, 11.1 KW-22 KW-7920/-, 22.1 KW-45 KW-12200/-, 45.1 KW-75 KW-25000/-, 75.1 KW-110 KW-27000/-

-
Incuded w.e.f.03.07.2025

4535

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 1328 (1996)

Veneered Decorative Plywood -Specification

BWR,MR/Type-1,2/All Size

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	200	-
4.1(Grade - For MR)	-	200	-
4.2(Type - For Type 1)	-	400	-
4.2(Type - For Type 2)	-	400	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	400	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	400	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	400	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	400	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	400	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	400	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	400	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	400	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	400	-
9(Finish - Cl. 9.1, 8.3)	-	400	-
9(Finish - Cl. 9.2, 8.3)	-	400	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	400	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	400	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	400	-
6.1(Decorative Veneers (Thickness))	-	400	-

23 May, 2028

-
Included w.e.f 24.06.2025

4536

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All Size

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	10000	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	10000	-
11(Transverse Tension Test,%)	-	10000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	10000	-
13 (Table No.- 7)(Flaring Test)	-	10000	-
14(Flattaning Test-IS 2328)	-	10000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	10000	-
17(Leak Tighteness Test)	-	10000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	10000	-
21(Workmanship, Finish and Appearance)	-	10000	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	10000	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	10000	-
Clause 10.1 - Table 4(Tensile Strength)	-	10000	-
Clause 10.1 - Table 4(Percent Elongation)	-	10000	-
Clause 11(Transverse Tension Test)	-	10000	-
Clause 12(Hardness Test)	-	10000	-
Clause 13(Flaring Test)	-	10000	-
Clause 14(Flattening Test)	-	10000	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	10000	-
10.2(Hardness test IS 1500 (part-1):2019)	-	10000	-
12.2(Flaring test IS 17878:2022)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	10000	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	10000	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	10000	-
Clause 15(Grain Size)	-	10000	-
Clause 17(Leak Tightness Test)	-	10000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	10000	-
Clause 21(Workmanship, Finish & Appearance)	-	10000	-
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	0	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	0	-
11(Transverse Tension Test,%)	-	0	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	0	-
13 (Table No.- 7)(Flaring Test)	-	0	-
14(Flattaning Test-IS 2328)	-	0	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	0	-
17(Leak Tighteness Test)	-	0	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	0	-
21(Workmanship, Finish and Appearance)	-	0	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flaring Test)	-	0	-
Clause 14(Flattening Test)	-	0	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
10.2(Hardness test IS 1500 (part-1):2019)	-	0	-
12.2(Flaring test IS 17878:2022)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	0	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	0	-
Clause 15(Grain Size)	-	0	-
Clause 17(Leak Tightness Test)	-	0	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 21(Workmanship, Finish & Appearance)	-	0	-

-
Included w.e.f 16.07.2025 Exclusion: Eddy Current

4537

Sleen India Biz venture Private Limited, Agra

9139736

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

Footwear

60500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	500	-
6(Sizes and Fittines)	-	500	-
7(Consturction)	-	800	-
8.1(Lining Material)	-	200	-
8.2, Table-1 (i)(Width, mm, Min)	-	300	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	800	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	1500	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	500	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1000	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	1000	-
8.5.2(Thickness)	-	400	-
8.5.3(Flexing Resistance)	-	1000	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	500	-
8.6.2(Tear Strength)	-	1000	-
8.6.3(Abrasion Resistance of Outsole)	-	1000	-
8.6.4(Flexing Resistance)	-	1000	-
8.6.5(Inter layer Bond Strength of outsole)	-	1000	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	700	-
Cl-8.8.1(Outsole/Heel)	-	800	-
Cl-8.9(Leak Proof Test)	-	1000	-
8.10(Height of Upper)	-	300	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	800	-
Cl-8.12(Upper Outsole Bond Strength)	-	700	-
Cl-8.13(Internal Length of Toe Cap)	-	800	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	500	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	500	-
8.16(Banned Chemicals)	-	30000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	3000	-
8.17(Steel Floor with Glycerine)	-	0	Test price for cl. 8.17 is 3000/-.
8.18(Corrosion Resistant Test for Toe Caps)	-	500	-
9.1(Penetration Resistance)	-	1000	-
9.2(Antistatic Footwear)	-	1000	-
9.3(Flame Resistance Property)	-	1000	-
9.4(Electrical Resistance)	-	1000	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	Test price for cl. 9.5 Resistance to Acid and Alkali is 1000/-.
9.6(Resistance to Fuel Oil)	-	1000	-
11.2(Marking)	-	500	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	-
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	`
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	`
8.4(Use of Rubber material)	-	0	`
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-
Cl-5(Design)	-	0	-
6(Sizes and Fittines)	-	0	``
7(Consturction)	-	0	-
8.1(Lining Material)	-	0	-
8.2, Table-1 (i)(Width, mm, Min)	-	0	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	0	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	0	-
8.4(Use of Rubber material)	-	0	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	0	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	0	-
8.5(Upper material)	-	0	-
8.5.1(Tensile Strength of upper)	-	0	-
8.5.2(Thickness)	-	0	-
8.5.3(Flexing Resistance)	-	0	-
8.5.4(Abrasion Resistance)	-	0	-
8.6.1(Thickness of Outsole)	-	0	-
8.6.2(Tear Strength)	-	0	-
8.6.3(Abrasion Resistance of Outsole)	-	0	-
8.6.4(Flexing Resistance)	-	0	-
8.6.5(Inter layer Bond Strength of outsole)	-	0	-
Cl-8.7(Insocks material)	-	0	-
8.7.1(Thickness of Insocks)	-	0	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	0	-
Cl-8.8.1(Outsole/Heel)	-	0	-
Cl-8.9(Leak Proof Test)	-	0	-
8.10(Height of Upper)	-	0	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	0	-
Cl-8.12(Upper Outsole Bond Strength)	-	0	-
Cl-8.13(Internal Length of Toe Cap)	-	0	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	0	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	0	-
8.16(Banned Chemicals)	-	0	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	0	-
8.17(Steel Floor with Glycerine)	-	0	-
8.18(Corrosion Resistant Test for Toe Caps)	-	0	-
9.1(Penetration Resistance)	-	0	-
9.2(Antistatic Footwear)	-	0	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	0	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	0	-
9.6(Resistance to Fuel Oil)	-	0	-
11.2(Marking)	-	0	-

-
Included w.e.f 18.08.2025

4538

COTTON ASSOCIATION OF INDIA, COTTON TESTING AND RESEARCH LABORATORY, JALGAON

7195836

IS 12171 (2024)

Cotton Bales Specification Fourth Revision

1466 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1.1(Staple Length)	-	201	-
Cl-5.1.2(Trash Content)	-	201	-
Cl-5.1.3(Moisture Content)	-	130	-
Cl-5.1.4(Strength of Fibre)	-	201	-
Cl-5.1.5(Micronaire Value)	-	130	-
Cl-5.1.6(Alternate Variety of the ginned cotton)	-	201	-
Cl-5.2.1(Dimensions)	-	201	-
Cl-5.2.2(Mass (Weight))	-	201	-

13 Jan, 2029

-
Exclusion: Cl.5.2 (Pressed Bales)

4539

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 9396 : Part 2 (2012)

Round open top sanitary cans for foods and drinks - Specification: Part 2 sizes and general requirements (Second Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Diameter)	-	15000	-
4.1.2(Capacities and Tinplate Thicknes)	-	15000	-
4.3(Internal Finish)	-	15000	-
4.4(External Treatment)	-	15000	-
5.1(Air Pressure Test)	-	15000	-
6( Packing And Conditions Of Supply)	-	15000	-
7(Marking)	-	15000	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

4540

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

CPS 2062/E250BR , CPS 1079/HR2 , CPS 2002/3 , CPS 2041/R260 , CPS 1786/Fe500D , CPS 6911/304 , CPS 7904/HC42A

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	3500	-
Clause - 7.1(SULPHUR)	-	3500	-
Clause - 7.1(PHOSPHURS)	-	3500	-
Clause - 7.1(MANGANESE)	-	3500	-
Clause - 7.1(NITROGEN)	-	3500	-
As per Clause 10(Dimension)	-	500	-
As per Clause 10.1(Dimension Width)	-	500	-
As per Clause 10.1(Dimension Thickness)	-	500	-
As per Clause 10.2(Dimension Length)	-	500	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	1000	-
As per Clause 11.5(Bend)	-	1000	-
As per Clause 11.6(Camber)	-	1000	-
As per Clause 11.7 (i)(Out of Square)	-	1000	-
As per Clause 11.7 (ii)(Round Corners)	-	1000	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	1000	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	1000	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	1000	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	1000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	1000	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Macro examination test.)	-	0	-
Clause. 13(Sulphur print.)	-	0	-
Clause. 13(Inclusion content)	-	0	-
Clause. 14(Marking)	-	500	-
Clause.15(Ordering information)	-	500	-
Clause.6.0(Manufacture)	-	500	-
Clause.7.1(Silicon)	-	3500	-
Clause.7.1(Carbon Equbalant)	-	3500	-
Clause.7.1(Microalloy element)	-	3500	-

-
Included w.e.f 23.07.2025 Excluding Clause. 13 Macro examination test, Sulphur Print, Inclusion Content(Optional Tests)

4541

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 9396 : Part 1 (1987)

Specification for round open top sanitary cans for foods and drinks: Part 1 tinplate (First Revision)

All Type

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tinplate- Carbon %)	-	15000	-
3.1(Tinplate- Manganese %)	-	15000	-
3.1(Tinplate- Phosphorus %)	-	15000	-
3.1(Tinplate- Sulphur %)	-	15000	-
3.1(Tinplate- Silicon %)	-	15000	-
3.1(Tinplate- Copper %)	-	15000	-
3.3(Tin Coating Mass- Body)	-	15000	-
3.3(Tin Coating Mass- Ends)	-	15000	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	15000	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	15000	-
3.2(Tinplate Thickness and Dimension: width)	-	15000	-
3.2(Tinplate Thickness and Dimension : length)	-	15000	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	15000	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	15000	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.4(Surface Finish)	-	15000	-
3.5 Appendix A(Tin Grain Size)	-	15000	-
3.6 Appendix B(Iron Solution Value)	-	15000	-
3.7(Surface Oil Coating)	-	15000	-
3.9(Shape)	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1O(Mechanical Properties )	-	15000	-
3.1(Tinplate- Carbon %)	-	-	-
3.1(Tinplate- Manganese %)	-	-	-
3.1(Tinplate- Phosphorus %)	-	-	-
3.1(Tinplate- Sulphur %)	-	-	-
3.1(Tinplate- Silicon %)	-	-	-
3.1(Tinplate- Copper %)	-	-	-
3.3(Tin Coating Mass- Body)	-	-	-
3.3(Tin Coating Mass- Ends)	-	-	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	-	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	-	-
3.2(Tinplate Thickness and Dimension: width)	-	-	-
3.2(Tinplate Thickness and Dimension : length)	-	-	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	-	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	-	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	-	-
3.4(Surface Finish)	-	-	-
3.4(Surface Finish)	-	-	-
3.5 Appendix A(Tin Grain Size)	-	-	-
3.6 Appendix B(Iron Solution Value)	-	-	-
3.7(Surface Oil Coating)	-	-	-
3.9(Shape)	-	-	-
3.1O(Mechanical Properties )	-	-	-
3.1O(Mechanical Properties )	-	-	-

02 Jun, 2027

-
Included w.e.f.04.07.2025

4542

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	300	-
Clause No - 5.18(linear and angular dimension)	-	300	-
Clause No - 6.2(harmfull ingress of water)	-	300	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	600	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	600	-
Clause No - 8.2(Addition)	-	600	-
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1200	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1200	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	400	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	800	-
Clause No -24.1.3(for switches)	-	800	-
Clause No -24.1.4(for automatic control)	-	800	-
Clause No -24.1.5(for innterconnection couplers)	-	800	-
Clause No -24.4(plug and socket)	-	800	-
Clause No -25.8, Table no -11(conductor resistance)	-	800	-
Clause No -25.5(dimension for pins)	-	800	-
Clause No -27.6(for circuit board)	-	800	-
Clause No -29.2(comparative tracking index)	-	1200	-
Clause No -29.3.3(dry heat test)	-	1200	-
Clause No -30.2.1(glow wire test)	-	1200	-
Clause No -30.101("incorporate combustible material")	-	1200	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1200	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	800	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	1400	-

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

4543

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17788 (2021)

Medical Textiles Nonwoven Fabric for Wipes Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Fibre identification)	-	500	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	500	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	1000	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	1500	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	1500	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	1500	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	1500	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	1500	-
Clause 6.1, Table 1, (vi)(pH)	-	1000	-
Clause 6.1, Table 1, (i)(Fibre identification)	-	0	-
Clause 6.1, table 1, (ii)(Weight per square metre, g/m2)	-	0	-
Caluse 6.1, Table 1, (iii) (a)(Absorption a) Sinking time, s, Max)	-	0	-
Caluse 6.1, Table 1, (iii) (b)(Absorption b) Water holding capacity, percent, Min)	-	0	-
Clause 6.1 , Table 1, (iv) (a)(Breaking strength (dry), N, Min a) Machine direction)	-	0	-
Clause 6.1 , Table 1, (iv) (b)(Breaking strength (dry), N, Min b) Cross direction)	-	0	-
Clause 6.1, Table 1, (v) (a)(Breaking strength (wet), N, Min a) Machine direction)	-	0	-
Clause 6.1, Table 1, (v) (b)(Breaking strength (wet), N, Min b) Cross direction)	-	0	-
Clause 6.1, Table 1, (vi)(pH)	-	0	-

-
Included w.e.f 02.07.2025

4544

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

All

44300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44300	-
Clause 4.1 (ii))(Free water, percent)	-	44300	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44300	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44300	-
Clause 4.1 ( v)(Chloride content, Max)	-	44300	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44300	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44300	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44300	-
Clause 6.3(Density kg/m3)	-	44300	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44300	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44300	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44300	-
Clause 6.6(Water Absorption)	-	44300	-
Clause 6.7(Jolting Test)	-	44300	-
Clause 9(MARKING)	-	44300	-

25 Apr, 2028

-
Included w.e.f 19.06.2025

4545

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 2 (2022)

Gypsum plaster boards - specification: Part 2 Coated laminated gypsum plaster boards Third Revision of IS 2095 Part 2

All

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( i)("CaS04 . 2H2 O, Min")	-	42000	-
Clause 4.1 (ii))(Free water, percent)	-	42000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	42000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	42000	-
Clause 4.1 ( v)(Chloride content, Max)	-	42000	-
(Clause 6.1.1)(Dimensions - Width,Length, Thickness (mm))	-	42000	-
(Clause 6.1.2)(Tolerance on Shape)	-	42000	-
(Clause 6.2)(Density)	-	42000	-
(Clause 6.3)(" Flexural Breaking Load ")	-	42000	-
(Clause 6.5)("Finish ")	-	42000	-
(Clauses 7.1.2 )(Sampling of Gypsum Plaster Board)	-	42000	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 6.4) (Fire Resistance)

4546

Stellar Test House, Noida

8171606

IS 712 (1984)

Specification for building limes (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	500	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	500	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	300	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	700	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	1500	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	750	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	500	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	500	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	1000	-
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	0	-
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	0	-
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	0	-
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	0	-
Cl 4 ,Table 1(Chem reqd)	-	0	-
cl 4, Table 2(Physical reqd)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	0	-
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	0	-
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	0	-
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	0	-
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	0	-

26 Sep, 2028

-
Included w.e.f 12.09.2025

4547

IEC TEST LABS LLP

8165726

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	2000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	2000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	2000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	3000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	3000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	3000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-

07 Sep, 2026

-
Included .w.e.f.18.07.2025

4548

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17787 (2021)

Medical Textiles Nonwoven Wipes Specification

15200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table 1, (i)(Length and width, mm)	-	500	-
Clause 6.1, Table 1, (ii)(pH)	-	1000	-
Clause 6.1, Table 1, (iii)(Total viable count, (cfu/g), Max)	-	1000	-
Clause 6.1, Table 1, (iv)(Pseudomonas aeruginosa)	-	1000	-
Clause 6.1, Table 1, (v)(Staphylococcus aureus)	-	1000	-
Clause 6.1, Table 1, (vi)(Candida albicans)	-	1200	-
Clause 6.1, Table 1, (vii)(E. coli)	-	1000	-
Clause 6.1, Table 1, (viii)(Anti-bacterial activity (optional), absorption method,)	-	0	-
Clause 6.3(Seal Leakage Test)	-	1000	-

-
Included w.e.f 04.07.2025 Exclusion: Cl 6.1 Table 1(viii) Anti-Bacterial Activity(optional)

4549

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	1000	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28.1(Screws and connections)	-	1000	-
22.2(Construction, IS 302-1)	-	1000	-
22.3(Construction, IS 302-1)	-	1000	-
B.22.4(Construction, IS 302-1)	-	1000	-
B.22.5(Construction, IS 302-1)	-	1000	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
15.2(Spillage Test)	-	0	-
15.2(Moisture resistance)	-	0	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-
15.2(Spillage Test)	-	-	-
15.2(Moisture resistance)	-	-	-

03 Oct, 2027

-
Included w.e.f 02.09.2025 Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

4550

BIS, Central Laboratory (CL)

None

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade Rs. 4800/- Testing Charge for Boric Acid- b) Technical (TECH) Grade Rs. 2000/- Testing Charge for Boric Acid- c) Explosive Grade Rs. 2300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-

-
GRADE OF BORIC ACID AS PER CL. 3 OF IS 10116 MAY BE DECLARED

4551

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

all

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	42500	-
Clause. 5.0(Free water (Natural / By -product))	-	42500	-
Clause. 5.0(pHvalue (Natural / By -product))	-	42500	-
Clause. 5.0(SiO2)	-	42500	-
Clause. 5.0(Chloride content)	-	42500	-
Clause. 6.0(Manufacturing)	-	42500	-
Clause. 7.0(Dimensions)	-	42500	-
Clause. 7.0(Tolerances)	-	42500	-
Clause. 7.0(Density)	-	42500	-
Clause. 7.0(Flexural Breaking Load)	-	42500	-
Clause. 7.0(Impact Resistance)	-	42500	-
Clause. 7.0(Surface Hardness)	-	42500	-
Clause. 7.0(Loading Capability)	-	42500	-
Clause. 7.0(Water Absorption)	-	42500	-
Clause. 7.0(Finish)	-	42500	-
Cl-5.3(Paper Liner)	-	42500	-
Clause 7.1(Dimensions)	-	42500	-
(Clause 7.2)(Density)	-	42500	-
(Clause 7.3)(Flexural Load)	-	42500	-
(Clause 7.4)(Impact Resistance)	-	42500	-
(Clause 7.5)(Surface Hardness)	-	42500	-
(Clause 7.6)(Loading Capability)	-	42500	-
(Clause 7.7)(Water Absorption)	-	42500	-

25 Apr, 2028

-
Included w.e.f 19.06.2025 Exclusion: (Clause 7.8) (Fire Resistance)

4552

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Remark
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	-
Cl-3.3 Table-1,2(Measuring force)	-	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	-
Cl-3.4.3(Preloading)	-	-
Cl-3.4.4(Length validation)	-	-
Cl-3.5(Marking)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	-
Cl-3.3 Table-1,2(Measuring force)	-	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	-
Cl-3.4.3(Preloading)	-	-
Cl-3.4.4(Length validation)	-	-
Cl-3.5(Marking)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	-

31 Dec, 2026

-
Included w.e.f. 16.03.2026 Exclusion: "Cl-12 (Marking) Cl-3.4.5 (Dynamic testing) Cl-3.6 (Cranked links) Cl-4.4, Table-3 (Minimum hole diameter d4) Cl-4.4, Table-3 (Platform height h4) Cl-4.4, Table-3 (Traverse distance between hole centres f) Cl-4.4, Table-4 (Height from chain centre line h5) Cl-4.4, Table-4 (Minimum diameter of holes d4) Cl-4.4, Table-5 (Pin diameter Types “X” and “Y” d2) Cl-4.4, Table-5 (Pin extension Type “X” b5) Cl-4.4, Table-5 (Pin extension Type “X” b8) Cl-4.4, Table-5 (Pin extensiona Type “Y” b10) Cl-4.4, Table-5 (Pin extensiona Type “Y” b9) Cl-4.6 (Marking) Cl-5.10 (Number of teeth) Cl-5.11 (Bore tolerance) Cl-5.3 (Diametral dimensions of sprocket rim) Cl-5.4 (Sprocket tooth gap forms) Cl-5.5 (Tooth heights and tip diameters) Cl-5.6 (Sprocket rim profiles) Cl-5.7 (Radial run-out) Cl-5.8 (Axial run-out (wobble)) Cl-5.9 (Pitch accuracy of sprocket teeth) "

4553

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

53700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	500.00	-
5,Table 1(Requirements)	-	0.00	-
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	0.00	-
5,Table 1(Thickness)	-	500.00	-
5,Table 1(Specific Gravity)	-	700.00	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1800.00	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0.00	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1300.00	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0.00	-
5,Table 1(Tear resistance (machine direction))	-	1600.00	-
5,Table 1(Tear resistance (Cross direction))	-	1100.00	-
5,Table 1(Index puncture resistance,N)	-	1100.00	-
5,Table 1(Low temperature crack resistance)	-	1600.00	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	1000.00	-
5,Table 1(Seam strength,kg,Min)	-	1100.00	-
5,Table 1(Volatile Loss ,% ,Max)	-	700.00	-
5,Table 1(Peel strength,kN/m,Min)	-	1100.00	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	7800.00	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	0.00	-
5,Table 1(Tensile strength (Transverse),% change)	-	0.00	-
5,Table 1(Elongation at break (Transverse),% change)	-	0.00	-
5,Table 1(Water extraction,% loss in weight)	-	600.00	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	28800.00	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0.00	-
6.0(Dimensions and tolerances)	-	0.00	-
5, Table-2(Length)	-	0.00	-
5, Table-2(Width)	-	0.00	-
5, Table-2(Thickness at 20kPa pressure)	-	0.00	-
5, Table-2(Tensile Strength (Longitudinal))	-	0.00	-
5, Table-2(Tensile Strength (Transverse))	-	0.00	-
5, Table-2(Elongation at break (Longitudinal))	-	0.00	-
5, Table-2(Elongation at break (Transverse))	-	0.00	-
5, Table-2(Tear Strength (Machine direction))	-	0.00	-
5, Table-2(Tear Strength (Cross direction))	-	0.00	-
5, Table-2(Behaviour during perforation)	-	0.00	-
5, Table-2(Height of fall without perforation)	-	0.00	-
5, Table-2(Cold crack resistance at low temperature)	-	0.00	-
5, Table-2(Hydrostatic Pressure Resistance)	-	0.00	-
5, Table-2(Dimensional Stability at 80 degree C)	-	0.00	-
5, Table-2(Change in length after heating)	-	0.00	-
5, Table-2(Change in width after heating)	-	0.00	-
5, Table-2(Resistance to acid and alkali)	-	0.00	-
5, Table-2(Strength of welded seam shear resistance)	-	0.00	-
5, Table-2(Resistance to static puncturing)	-	0.00	-
5, Table-2(Horizontal rate of burning)	-	0.00	-
5, Table-2(Vertical rate of burning)	-	0.00	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	0.00	-
5,Table 2(Specific Gravity)	-	0.00	-

24 Apr, 2027

-
Included w.e.f 06.06.2025 Exclusion: Cl 5,Table 1 (Resistance to soil burial)

4554

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

212200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,a(Marking )	-	32200	Extra EMI/EMC charges: 1,80,000
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.2(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.3(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.4(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.5(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.6(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.7(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
10.8(Speed Regulators)	-	32200	Extra EMI/EMC charges: 1,80,000
11.1(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
11.2(Starting)	-	32200	Extra EMI/EMC charges: 1,80,000
12(Interchangeability)	-	32200	Extra EMI/EMC charges: 1,80,000
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	180000	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	32200	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	32200	-
8.1,a(Marking )	-	32200	-
8.1,b(Marking )	-	32200	-
8.1,c(Marking )	-	32200	-
8.1,d(Marking )	-	32200	-
8.1,e(Marking )	-	32200	-
8.1,f(Marking )	-	32200	-
8.1,g(Marking )	-	32200	-
8.2(Marking )	-	32200	-
8.3(Marking )	-	32200	-
8.3,a(Marking )	-	32200	-
8.3,b(Marking )	-	32200	-
8.3,c(Marking )	-	32200	-
8.3,d(Marking )	-	32200	-
8.3,e(Marking )	-	32200	-
8.4(Marking )	-	32200	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	32200	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	32200	-
6.2(Rating)	-	32200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	32200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	32200	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	32200	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	32200	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	32200	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	32200	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	32200	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	32200	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	32200	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	32200	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	32200	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	32200	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	32200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	32200	-
10.1(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.2(Speed Regulators)	-	32200	-
10.3(Speed Regulators)	-	32200	-
10.4(Speed Regulators)	-	32200	-
10.5(Speed Regulators)	-	32200	-
10.6(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.7(Speed Regulators)	-	32200	-
10.8(Speed Regulators)	-	32200	-
11.1(Starting)	-	32200	-
11.2(Starting)	-	32200	-
12(Interchangeability)	-	32200	-
13(Silent Operation)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.3 & Table 1(Test for Air Performance)	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.4(Measurement of Speed of the Fan )	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
14.5(Measurement of Power factor and Power Input)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
16(Endurance Test)	-	32200	-
17(Test for Harmonic Distortion)	-	32200	-
4(GENERAL REQUIREMENTS)	-	32200	-
5(GENERAL NOTES ON TESTS)	-	32200	-
15.1, 15.2(Air delivery and service value)	-	32200	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	180000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	180000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	180000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	180000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	180000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	180000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	180000	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	32200	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	32200	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	32200	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	32200	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	32200	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	32200	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	32200	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	32200	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	32200	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	32200	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	32200	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	32200	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	32200	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	32200	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	32200	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	32200	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	32200	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	32200	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	32200	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	32200	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	32200	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	32200	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	32200	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	32200	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	32200	Extra EMI/EMC charges: 1,80,000
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	32200	Extra EMI/EMC charges: 1,80,000
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	0	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	0	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	0	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	0	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	0	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	0	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-

08 May, 2028

-
Included w.e.f.19.06.2025

4555

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
12(Charging of metal-ion batteries)	-	1800	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1600	-
15.3(Moisture resistance)	-	1600	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	800	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	600	-
19.101(Abnormal operation)	-	600	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
23(Internal wiring)	-	1200	-
24(Components)	-	1400	-
25("Supply connection and external flexible cords")	-	1600	-
26("Terminals for external conductors")	-	1600	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1500	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	500	-
22(Construction)	-	700	-
22.101(Construction)	-	700	-
22.102(Construction)	-	700	-
22.103(Construction)	-	700	-

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

4556

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	200	-
5(General conditions for the tests)	-	200	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	800	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	1200	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1600	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1600	-
17(Overload protection of transformers and associated circuits)	-	1200	-
18(Endurance)	-	500	-
19(Abnormal operation)	-	900	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1200	-
22(Construction)	-	1600	-
23(Internal wiring)	-	1400	-
24(Components)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1200	-
30(Resistance to heat and fire)	-	1500	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	500	-
12(Charging of metal-ion batteries)	-	700	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
25(Supply connection and external flexible cords)	-	700	-
26(Terminals for external conductors)	-	800	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.22.16(Auto Cord Reel Test), Cl.24(Components), Cl.22.46(Software Test), 32.2(Radiation Hazards)

4557

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1500	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	2000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1500	-
Cl-12.1(Test for Switches)	-	1800	-
Cl-13(Strength of Assembly)	-	1500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1800	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1200	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1800	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1800	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1500	-

-
Exclusion: 19.11.4.1 to 19.11.4.7 (EMI/EMC)

4558

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
7(Marking)	-	500	-
6(Classification )	-	500	-
6(Classification )	-	500	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	500	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	1000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	1000	-
Cl.22 of IS 2082:2018(Finish)	-	1000	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	1000	-
Cl.18 of IS 2082:2018( Reheating Time)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	1000	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	1000	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	500	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	500	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	500	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	500	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	500	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	500	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	500	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	500	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	500	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	500	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	500	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	500	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	500	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	500	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	500	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	500	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	500	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	500	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	500	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	500	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	500	-
7.14(Marking : Legibility and durability)	-	500	-
7.13(Marking : Official language of Instruction )	-	500	-
7.11(Marking : Indication of controls )	-	500	-
7.8(Marking : Terminals )	-	500	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	500	-
7.1(Marking : Rated power input)	-	500	-
7.1(Marking : Symbol for nature of supply )	-	500	-
7.1(Marking : Rated Voltage )	-	500	-
Cl.32 of IS 302-1:2008()	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
12(THERMOSTAT SETTING)	-	500	-
Cl-10(Mounting of the water heater)	-	500	-
Cl-11(Measurements of stored water temperature)	-	500	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	1000	-
Cl-14(Verification of the rated capacity)	-	1000	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	500	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
7.6(Marking : Symbol used )	-	500	-
7.1(Marking : Warning for Open- outlet )	-	500	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	500	-
7.1(Marking : Statement for a pressure-relief device)	-	500	-
7.1(Marking : Rated capacity)	-	500	-
7.1(Marking : Rated pressure)	-	500	-
7.1(Marking : Country of manufacture)	-	500	-
7.1(Marking: IP Number)	-	500	-
7.1(Marking: Symbol for Class II)	-	500	-
7.1(Marking: Model or type reference)	-	500	-

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.24(Components)

4559

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.1(Marking- IS 302-1)	-	200	-
7.6(Marking- IS 302-1)	-	200	-
7.8(Marking- IS 302-1)	-	200	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	800	-
10(Power Input and Current, IS 302-1)	-	1200	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	1500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1200	-
15.2(Moisture Resistance, IS 302-1)	-	1200	-
15(Moisture Resistance, IS 302-1)	-	1200	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	800	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	800	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1200	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	500	-
24.5(Components, IS 302-1)	-	500	-
24.6(Components, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	800	-
26(Terminals for External Conductors, IS 302-1)	-	800	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1200	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1500	-
31(Resistance of Rusting, IS 302-1)	-	1200	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
27(Provision for Earthing)	-	800	-
29(Clearances, Creepage distances and Solid Insulation)	-	1200	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC), Cl.15(IPX9), Cl.25.7(PVC Test), Cl.24(Components)

4560

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1364 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision )

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3(Dimension)	-	7500	For dimension testing
Cl. 4 and Table 3(Threads and tolerances)	-	500	For thread testing
Cl. 4 and Table 3(Mechanical Properties)	-	12500	For mechanical testing
Cl. 4 and Table 3(Finish – Coating)	-	1000	For coating testing
Cl. 4 and Table 3(Surface integrity)	-	3300	For surface integrity testing

-
Included w.e.f 06.06.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number