BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14118 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4681

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	N/A
7.0(Marking and instructions)	-	2000	N/A
8.0(Protection against access to live part test)	-	2000	N/A
9.0(Starting of motor-operated appliances test)	-	1000	N/A
10.0(Power Input and current test)	-	2000	N/A
11.0(Heating test)	-	2000	N/A
13.0(Leakage current and electric strength test)	-	1000	N/A
14.0(Transient voltages)	-	1000	N/A
16.0(Leakage current and electric strength test)	-	1000	N/A
15.0(Moisture Resistance)	-	2000	N/A
17.0(Overload protection of transformers test)	-	1000	N/A
19.0(Abnormal Operations)	-	2000	N/A
20.0(Stability and Mechanical Hazards)	-	2000	N/A
21.0(Mechanical Strength)	-	2000	N/A
22.0(Construction verification related tests)	-	2000	N/A
23.0(Internal wiring)	-	1000	N/A
24.0(Components)	-	1000	N/A
25.0(Supply connections and External Flexible Cords)	-	1000	N/A
26.0(Terminal for External Conductors)	-	1000	N/A
27.0(Provision for Earthing)	-	2000	N/A
28.0(Screws and connections)	-	1000	N/A
29.0(Clearances and Creepage distances and solid insulation)	-	1000	N/A
30.0(Resistance to heat and fire)	-	2000	N/A
31.0(Resistance to rusting)	-	2000	N/A
18.0(Endurance test)	-	1000	N/A
32.0(Radiation, Toxicity and Similar hazards)	-	1000	N/A
19.11.4.1(Electrostatic discharges)	-	0	N/A
19.11.4.2(Radiated fields)	-	0	N/A
19.11.4.3(Fast transient bursts)	-	0	N/A
19.11.4.4(Surge immunity test)	-	0	N/A
19.11.4.5(Immunity to conducted discharges)	-	0	N/A
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	N/A
19.11.4.7(Harmonics)	-	0	N/A
4(General Requirements)	-	1000	N/A
5(General condition for the tests)	-	1000	N/A

08 May, 2028

-
19.11.4.1 TO 19.11.4.7

4682

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

All Size

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	5000	-
Cl 9 & Table 2(Workmanship)	-	5000	-
Cl 10(Coating Adhesion )	-	5000	-
Cl 11(Workmanship)	-	5000	-
Cl 12(Weight)	-	5000	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9 & Table 2(Workmanship)	-	5000	-
Cl 10(Coating Adhesion )	-	5000	-
Cl 11(Workmanship)	-	5000	-
Cl 12(Weight)	-	5000	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9 & Table 2(Workmanship)	-	5000	-
Cl 10(Coating Adhesion )	-	5000	-
Cl 11(Workmanship)	-	5000	-
Cl 12(Weight)	-	5000	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	5000	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	5000	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	5000	-
Cl. 13.5(Camber)	-	5000	-
Cl. 13.4(Thickness)	-	5000	-
Cl. 13.3(Width)	-	5000	-
4, 5(CARBON)	-	5000	-
4, 5(SULPHUR)	-	5000	-
4, 5(PHOSPHURS)	-	5000	-
4.5(MANGANESE)	-	5000	-
4, 5(NITROGEN)	-	5000	-
4, 5(SILICON)	-	5000	-
4, 5(ALUMINIUM)	-	5000	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	5000	-
Cl 12(Weight)	-	5000	-
Cl 11(Workmanship)	-	5000	-
Cl 10(Coating Adhesion )	-	5000	-
Cl 9 & Table 2(Workmanship)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 8(UTM)	-	5000	-
Cl 9 & Table 2(Workmanship)	-	5000	-
Cl 10(Coating Adhesion)	-	5000	-
Cl 11(Workmanship)	-	5000	-
Cl 12(Weight)	-	5000	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	5000	-
Clause 8, Table 1(IS 1608 Part 1)	-	5000	-
Clause 8, Table 1(IS 1608 Part 1)	-	5000	-
Clause 8, Table 1(IS 1608 Part 1)	-	5000	-
Clause 9(IS 15961)	-	5000	-
Clause 9(IS 15961)	-	5000	-
Clause 9(IS 15961)	-	5000	-
Clause 9.7(IS 15961)	-	5000	-
Clause 11(IS 15961)	-	5000	-
Clause 12(IS 15961)	-	5000	-
Clause 13.1(IS 15961)	-	5000	-
Clause 13.2(IS 15961)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	5000	-
Clause 7.1(By Calculation)	-	5000	-
7.1(Chemical composition %, IS 513)	-	5000	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	5000	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	5000	-
10.0 (Table No.-3)(Coating adhesion test)	-	5000	-
11(Freedom from defects)	-	5000	-
12(Mass, kg)	-	5000	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	5000	-
7.1(Chemical composition %, IS 513)	-	5000	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	5000	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	5000	-
10.0 (Table No.-3)(Coating adhesion test)	-	5000	-
11(Freedom from defects)	-	5000	-
12(Mass, kg)	-	5000	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	5000	-
7.1(Chemical composition %, IS 513)	-	5000	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	5000	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	5000	-
10.0 (Table No.-3)(Coating adhesion test)	-	5000	-
11(Freedom from defects)	-	5000	-
12(Mass, kg)	-	5000	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	5000	-
Clause 8, Table 1(Tensile Strength)	-	5000	-
Clause 8, Table 1(Yield Strength)	-	5000	-
Clause 8, Table 1(Elongation)	-	5000	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	5000	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	5000	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	5000	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	5000	-
Clause 9.7(Differential Coating)	-	5000	-
Clause 11(Freedom from Defect)	-	5000	-
Clause 12(Mass)	-	5000	-
Clause 13.1(Coil Internal Diameter)	-	5000	-
Clause 13.2(Length Tolerance)	-	5000	-
Clause 7.1(Chromium)	-	5000	-
Clause 7.1(Nickel)	-	5000	-
Clause 7.1(Niobium)	-	5000	-
Clause 7.1(Vanadium)	-	5000	-
Clause 7.1(Titanium)	-	5000	-
Clause 7.1(Molybdenum)	-	5000	-
Clause 7.1(Boron)	-	5000	-
Clause 7.1(Calcium)	-	5000	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	5000	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	0	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	0	-
Cl. 13.5(Camber)	-	0	-
Cl. 13.4(Thickness)	-	0	-
Cl. 13.3(Width)	-	0	-
4, 5(CARBON)	-	0	-
4, 5(SULPHUR)	-	0	-
4, 5(PHOSPHURS)	-	0	-
4.5(MANGANESE)	-	0	-
4, 5(NITROGEN)	-	0	-
4, 5(SILICON)	-	0	-
4, 5(ALUMINIUM)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Cl 12(Weight)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 10(Coating Adhesion )	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9 & Table 2(Workmanship)	-	0	-
Cl 10(Coating Adhesion)	-	0	-
Cl 11(Workmanship)	-	0	-
Cl 12(Weight)	-	0	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 8, Table 1(IS 1608 Part 1)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9(IS 15961)	-	0	-
Clause 9.7(IS 15961)	-	0	-
Clause 11(IS 15961)	-	0	-
Clause 12(IS 15961)	-	0	-
Clause 13.1(IS 15961)	-	0	-
Clause 13.2(IS 15961)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	0	-
Clause 7.1(By Calculation)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
7.1(Chemical composition %, IS 513)	-	0	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	0	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	0	-
10.0 (Table No.-3)(Coating adhesion test)	-	0	-
11(Freedom from defects)	-	0	-
12(Mass, kg)	-	0	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	0	-
Clause 8, Table 1(Tensile Strength)	-	0	-
Clause 8, Table 1(Yield Strength)	-	0	-
Clause 8, Table 1(Elongation)	-	0	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	0	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	0	-
Clause 9.7(Differential Coating)	-	0	-
Clause 11(Freedom from Defect)	-	0	-
Clause 12(Mass)	-	0	-
Clause 13.1(Coil Internal Diameter)	-	0	-
Clause 13.2(Length Tolerance)	-	0	-
Clause 7.1(Chromium)	-	0	-
Clause 7.1(Nickel)	-	0	-
Clause 7.1(Niobium)	-	0	-
Clause 7.1(Vanadium)	-	0	-
Clause 7.1(Titanium)	-	0	-
Clause 7.1(Molybdenum)	-	0	-
Clause 7.1(Boron)	-	0	-
Clause 7.1(Calcium)	-	0	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	0	-

19 Nov, 2027

-
Included w.e.f 30.05.2025

4683

Planet Electro Labs Private Limited, Wazirpur

8185226

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

---

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	N/A
1.6(Power interface .)	-	1000	N/A
1.7(Markings and instructions)	-	2000	N/A
2.1(Protection from electric shock and energy hazards)	-	1000	N/A
2.2(SELV circuits)	-	1000	N/A
2.3(TNV circuits)	-	2000	N/A
2.4(Limited current circuits)	-	1000	N/A
2.5(Limited power sources .)	-	1000	N/A
2.6(Provisions for earthing and bonding)	-	1000	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000.01	N/A
2.8(Safety interlocks)	-	1000	N/A
2.9(Electrical insulation)	-	5000	N/A
2.10(Clearances, creepage distances and distances through insulation)	-	2000	N/A
3.1(General)	-	1000	N/A
3.2(Connection to a mains supply)	-	1000	N/A
3.3(Wiring terminals for connection of external conductors)	-	1000	N/A
3.4(Disconnection from the mains supply)	-	1000	N/AA
3.5(Interconnection of equipment)	-	1000	N/A
4.1(Stability)	-	1000	N/A
4.2(Mechanical strength)	-	1000	N/A
4.3(Design and construction)	-	1000	N/A
4.4(Protection against hazardous moving parts)	-	1000	N/A
4.5(Thermal requirements)	-	1000	N/A
4.6(Openings in enclosures)	-	1000	N/A
4.7(Resistance to fire)	-	1000	N/A
5.1(Touch current and protective conductor curren)	-	1000	N/A
5.2(Electric strength)	-	1000	N/A
5.3(Abnormal operating and fault conditions)	-	1000	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	N/A
7.1(General)	-	500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	500	N/A
2.8.2/2.8.5(Interlock switches)	-	1000	N/A
2.8.7(Switches and Relay)	-	0	N/A
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	N/A
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	N/A
2.10.5.6(Thin sheet materials)	-	1000	N/A
2.10.5.11(SMPS Transformer and Inductor)	-	0	N/A
2.10.5.12(Wires in wound components)	-	1000	N/A
2.10.5.13(Winding wire)	-	1000	N/A
2.10.5.14(Additional insulation in wound components)	-	1000	N/A
2.10.6(PCB material)	-	1000	N/A
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	N/A
2.10.8.4(Abrasion resistance test)	-	1000	N/A
2.10.9(Thermal Cycling)	-	5000	N/A
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	N/A
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	N/A
2.10.12(Enclosed and sealed parts)	-	1000	N/A
3.1.4(Internal wire)	-	1000	N/A
3.2.4(Appliance inlet /connector)	-	1000	N/A
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	N/A
4.2.8(Cathode Ray Tubes)	-	0	N/A
4.3.8(Batteries)	-	1000	N/A
4.3.10(Dust, powders, liquids and gases)	-	1000	N/A
4.3.11(Containers for liquids or gases)	-	1000	N/A
4.3.12(Flammable liquids)	-	1000	N/A
4.3.13.2(Ionizing radiation)	-	0	N/A
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	N/A
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	0	N/A
4.3.13.5(LED, laser class)	-	0	N/A
Annex A3(Hot flaming oil test)	-	0	N/A
Annex U(Insulating winding wires for use without interleaved insulation)	-	0	N/A
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	0	N/A
Annex K(Thermal Control)	-	1000	N/A
Annex Q(Voltage Dependent Resistors)	-	1000	N/A
Annex B(Motor tests under abnormal conditions)	-	1000	N/A
Annex C(Transformers)	-	1000	N/A
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	N/A
Annex EE(Household and home/ office document/ media shredders)	-	1000	N/A
4.6.2(Bottoms of fire enclosures)	-	0	N/A
1.5(Components)	-	0	N/A
2.10.5.4(Opto-coupler)	-	0	N/A
3.2.4(Appliance inlet /connector)	-	1000	N/A

08 May, 2028

-
-

4684

YORLAB LLP

7188606

IS 210 (2009)

Grey iron castings - Specification (First Revision)

FG 150/200/220/260/300/350/400

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	1000	-
10.1(FREEDOM FROM DEFECTS)	-	1500	-
10.2(FREEDOM FROM DEFECTS)	-	500	-
13(SIZE OF TEST BARS-Diameter)	-	250	-
13(SIZE OF TEST BARS-Length)	-	250	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	-
16, Table 3(Hardness Test)	-	1000	-
17,Annex B(TRANSVERSE TEST)	-	2500	-
18(HYDROSTATIC TEST)	-	3000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	500	-
10.1(FREEDOM FROM DEFECTS)	-	500	-
10.2(FREEDOM FROM DEFECTS)	-	500	-
13(SIZE OF TEST BARS-Diameter)	-	250	-
13(SIZE OF TEST BARS-Length)	-	250	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	-
16, Table 3(Hardness Test)	-	1500	-
17,Annex B(TRANSVERSE TEST)	-	2500	-
18(HYDROSTATIC TEST)	-	3000	-
9(IS 7754)	-	1500	-
9(IS 7754)	-	1500	-
9(Microstructure)	-	1500	-
21(Marking)	-	0	-
9(Microstructure)	-	1500	-
7.2(Casting dimensions)	-	500	-
Cl-6(Phosprorus (P) - IS 12308 ( P-5))	-	500	-

08 Oct, 2028

-
-

4685

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	1200	-
5.1 table 2(0.2% proof strength)	-	1000	-
5.1 table 2(Tensile strength)	-	1000	-
5.1 table 2(Elongation)	-	1000	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
9.1(Tensile test)	-	1000	-

24 Apr, 2028

-
-

4686

BLUESKY LAB LLP, GHAZIABAD

8170306

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	500	30% discount offered to BIS
30(Resistance to Heat & Fire)	-	1000	30% discount offered to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	30% discount offered to BIS
28(Screws & Connection)	-	1000	30% discount offered to BIS
27(Provision For Earthing)	-	1000	30% discount offered to BIS
26(Terminals For External Conductors)	-	1000	30% discount offered to BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
22(Construction)	-	1000	30% discount offered to BIS
21(Mechanical strength)	-	1500	30% discount offered to BIS
20(Stability & Mechanical Hazards)	-	1500	30% discount offered to BIS
19(Abnormal Operation)	-	1500	30% discount offered to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	30% discount offered to BIS
16(Leakage Current and Electric Strength)	-	1500	30% discount offered to BIS
15(Moisture Resistance)	-	1500	30% discount offered to BIS
14(Transient Over Voltage)	-	1500	30% discount offered to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	30% discount offered to BIS
11(Temperature Rise/Heating)	-	1500	30% discount offered to BIS
10(Power Input & Current)	-	1500	30% discount offered to BIS
9(Starting Of Motor Operated Appliances)	-	1500	30% discount offered to BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1500	30% discount offered to BIS
7(Marking/ Marking & Instructions)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1500	30% discount offered to BIS
18(Endurance)	-	1500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
22.32(CONSTRUCTION)	-	1000	30% discount offered to BIS
31(Resistance to Rusting)	-	-	-
30(Resistance to Heat & Fire)	-	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-	-
28(Screws & Connection)	-	-	-
27(Provision For Earthing)	-	-	-
26(Terminals For External Conductors)	-	-	-
25(Supply Connection & External Flexible Cables and Cords)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical strength)	-	-	-
20(Stability & Mechanical Hazards)	-	-	-
19(Abnormal Operation)	-	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-	-
16(Leakage Current and Electric Strength)	-	-	-
15(Moisture Resistance)	-	-	-
14(Transient Over Voltage)	-	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-	-
11(Temperature Rise/Heating)	-	-	-
10(Power Input & Current)	-	-	-
9(Starting Of Motor Operated Appliances)	-	-	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	-	-
7(Marking/ Marking & Instructions)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
18(Endurance)	-	-	-
6(Classification)	-	-	-
22.32(CONSTRUCTION)	-	-	-

22 May, 2028

-
Included w.e.f.27.02.2025 Exclusion Cl 19.11.4.1 Electrostatic discharge Cl 19.11.4.2 (Radiated fields) 24 (Components) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics)

4687

CIPET, Hyderabad

6111634

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

Polyethylene Pipes for the Supply of Gaseous Fuels

520000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	25 % DISCOUNT FOR BIS
4.3(Nominal Diameter)	-	500	25 % DISCOUNT FOR BIS
4.4(Colour)	-	500	25 % DISCOUNT FOR BIS
5.1(Polyethylene compound)	-	6100	25 % DISCOUNT FOR BIS
5.3(Anti-oxidant)	-	0	25 % DISCOUNT FOR BIS
5.4(U-V stabilizer)	-	2500	25 % DISCOUNT FOR BIS
5.7(PE Compound Quality Evaluation)	-	400000	25 % DISCOUNT FOR BIS
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	25 % DISCOUNT FOR BIS
5.6(Resistance to Weathering)	-	36000	25 % DISCOUNT FOR BIS
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	25 % DISCOUNT FOR BIS
6.1(Out of Roundness (Ovality))	-	500	25 % DISCOUNT FOR BIS
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	25 % DISCOUNT FOR BIS
7(Finish)	-	500	25 % DISCOUNT FOR BIS
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	5300	25 % DISCOUNT FOR BIS
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4500	25 % DISCOUNT FOR BIS
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	25 % DISCOUNT FOR BIS
8.2(Reversion Test)	-	700	25 % DISCOUNT FOR BIS
8.3(Density)	-	700	25 % DISCOUNT FOR BIS
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	25 % DISCOUNT FOR BIS
8.7(Volatile Matter Content)	-	700	25 % DISCOUNT FOR BIS
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	25 % DISCOUNT FOR BIS
8.9(Resistance to Weathering)	-	36000	25 % DISCOUNT FOR BIS
6.4(Length of Pipe)	-	500	25 % DISCOUNT FOR BIS
8.4(Melt Flow Rate (MFR))	-	1100	25 % DISCOUNT FOR BIS
8.5(Pigment Dispersion)	-	700	25 % DISCOUNT FOR BIS
8.10(Slow Crack Growth Rate Test)	-	10800	25 % DISCOUNT FOR BIS
8.11(Squeeze-off)	-	1300	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	700	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(iv) Volatile content)	-	700	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(v) Water content1))	-	700	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	700	25 % DISCOUNT FOR BIS
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	400000	25 % DISCOUNT FOR BIS
5.3(Anti-Oxidant)	-	0	25 % DISCOUNT FOR BIS
5.4(U.V. Stabilizer)	-	2500	25 % DISCOUNT FOR BIS
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	5000	25 % DISCOUNT FOR BIS
5.6(ii) Hydraulic characteristics)	-	36000	25 % DISCOUNT FOR BIS
5.6(iii) Thermal stability (Oxidation induction time))	-	2200	25 % DISCOUNT FOR BIS
6(Dimensions of pipes)	-	1500	25 % DISCOUNT FOR BIS
7(Finish)	-	500	25 % DISCOUNT FOR BIS
8.1(Hydraulic Characteristics)	-	20800	25 % DISCOUNT FOR BIS
8.2(Reversion test)	-	700	25 % DISCOUNT FOR BIS
8.3(Density)	-	700	25 % DISCOUNT FOR BIS
8.4(Melt Flow Rate)	-	1100	25 % DISCOUNT FOR BIS
8.5(Pigment Dispersion)	-	700	25 % DISCOUNT FOR BIS
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	25 % DISCOUNT FOR BIS
8.7(Volatile Matter Content)	-	700	25 % DISCOUNT FOR BIS
8.9(Resistance to Weathering)	-	36000	25 % DISCOUNT FOR BIS
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1800	25 % DISCOUNT FOR BIS
8.10(Slow Crack Growth Rate Test)	-	10800	25 % DISCOUNT FOR BIS
8.11(Squeeze-of)	-	1300	25 % DISCOUNT FOR BIS
10(Marking)	-	0	25 % DISCOUNT FOR BIS

23 Feb, 2027

-
Included w.e.f.22.05.2025

4688

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 4026 (2007)

Aluminium ingots, billets and wire bars (Ec Grade) (Fourth Revision)

1200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 8 Table 1(CHEMICAL COMPOSITION 1) Aluminium ,& min)	-	1200	-
Clause 8 Table 1(2) Silicon)	-	1200	-
Clause 8 Table 1(Chemical Composition 3) Iron)	-	1200	-
Clause 8 Table 1(Chemical Composition 4) Copper)	-	1200	-
Clause 8 Table 1(Chemical Composition 5) Titanium+ Vanadiun)	-	1200	-
Clause 8 Table 1(Chemical Composition 6) Manganese, Zirconium and Chromium)	-	1200	-

24 Apr, 2028

-
-

4689

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

1200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Chemical composition )	-	1200	-
Table-1, Clause - 6.1.1(Copper)	-	1200	-
Table-1, Clause - 6.1.1(Iron)	-	1200	-
Table-1, Clause - 6.1.1(Magnesium)	-	1200	-
Table-1, Clause - 6.1.1(Manganese)	-	1200	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	1200	-
Table-1, Clause - 6.1.1(Silicon)	-	1200	-
Table-1, Clause - 6.1.1(Vanadium)	-	1200	-
Table-1, Clause - 6.1.1(Zinc)	-	1200	-
Table-1, Clause - 6.1.1(Other elements (each))	-	1200	-
Table-1, Clause - 6.1.1(Others Total)	-	1200	-
Table-1, Clause - 6.1.1(Aluminium)	-	0	-

24 Apr, 2028

-
-

4690

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 18507 (2024)

Drywall Screws ï¿½ Specification

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	3000	-
Clause. 4.0(Thread size.)	-	3000	-
Clause. 4.0(Length)	-	3000	-
Clause. 5.0(Cross Recess)	-	3000	-
Clause. 5.0(Tolerances)	-	3000	-
Clause. 5.0(Surface Condition)	-	3000	-
Clause. 5.0(Surface Coating)	-	3000	-
Clause. 5.0(Acceptability)	-	3000	-
Clause.6.0(Torque Testing)	-	5000	-
Clause.7.0(Hardness)	-	5000	-
Clause.8.0(Designation)	-	3000	-
Clause.9.0(Marking)	-	3000	-
Clause. 5.0(Material)	-	3000	-

05 Apr, 2027

-
Included w.e.f. 03.03.2025

4691

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	3000	-
Clause. 4.0(Thread size.)	-	3000	-
Clause. 4.0(Length)	-	3000	-
Clause. 5.0(Material)	-	3000	-
Clause. 5.0(Cross Recess)	-	3000	-
Clause. 5.0(Tolerances)	-	3000	-
Clause. 5.0(Surface Condition)	-	3000	-
Clause. 5.0(Surface Coating)	-	3000	-
Clause.6.0(Acceptability)	-	3000	-
Clause.6.0(Torque Testing)	-	5000	-
CClause.7.0(Hardness)	-	5000	-
Clause.8.0(Designation)	-	3000	-
Clause.9.0(Marking)	-	3000	-

05 Apr, 2027

-
-

4692

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 17397 : Part 1 (2022)

PLASTICS THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION PART 1 DESIGNATION SYSTEM AND SPECIFICATIONS

34900 View breakup
-

Clause No.	Exclusion	Remark
4.1(General)	-	-
4.2.1(Data Block 1)	-	-
4.2.2(Data Block 2)	-	-
4.2.3(Data Block 3)	-	-
4.2.4(Data Block 4)	-	-
4.2.5(Data Block 5)	-	-
4.2.5.1(Hardness)	-	-
4.2.5.2(Tensile Modulus of Elasticity)	-	-
4.2.6(Data Block 6)	-	-
6.1(Hardness)	-	-
6.2(Tensile Modulus of Elasticity)	-	-
6.3.1.1(Pigments and Colourants)	-	-
6.3.1.2(Overall Migration)	-	-
7(Packing and Marking)	-	-

25 Feb, 2027

-
Included w.e.f. 24.02.2025

4693

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15.1(Moisture Resistance)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 6(Classification- IS 302-1)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	2000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	2000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	2000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	2000	-
Cl. 22 IS 302-2-9(Construction )	-	2000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	2000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	2000	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	2000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	2000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	2000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	1000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	1000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	0	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	0	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	0	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	0	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	0	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	0	-
Cl. 24 IS 302-2-9(Components)	-	0	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	0	-
Cl. 22 IS 302-2-9(Construction )	-	0	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	0	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	0	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	0	-
Cl. 18 IS 302-2-9(Endurance)	-	0	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	0	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	0	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	0	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	0	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 IS 302-2-9(Heating)	-	0	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	0	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	0	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	0	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
8(Protection against access to live parts)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

15 May, 2028

-
Included w.e.f.024.04.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components) Cl 32 (Radiation, toxicity and similar hazards)

4694

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 3039 (2024)

STRUCTURAL STEEL FOR CONSTRUCTION OF SHIPS - SPECIFICATION (Third revision)

all

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	18500	excluding GST
Cl-5(Designation and grade)	-	18500	excluding GST
Cl-6(Manufacture)	-	18500	excluding GST
Cl-7(FREEDOM FROM DEFECTS)	-	18500	excluding GST
Cl-8(CHEMICAL COMPOSITION)	-	18500	excluding GST
Cl-8.3, Table-1(C < 0.20)	-	18500	excluding GST
Cl-8.3, Table-1(C ≥ 0.20)	-	18500	excluding GST
Cl-8.3, Table-1(Mn)	-	18500	excluding GST
Cl-8.3, Table-1(S)	-	18500	excluding GST
Cl-8.3, Table-1(P)	-	18500	excluding GST
Cl-8.3, Table-1(Si)	-	18500	excluding GST
Cl-8.3, Table-1(N)	-	18500	excluding GST
Cl-8.3, Table-1(Cr)	-	18500	excluding GST
Cl-8.3, Table-1(Mo)	-	18500	excluding GST
Cl-8.3, Table-1(Ni)	-	18500	excluding GST
Cl-8.3, Table-1(Cu)	-	18500	excluding GST
Cl-8.3, Table-1(Nb)	-	18500	excluding GST
Cl-8.3, Table-1(V)	-	18500	excluding GST
Cl-8.3, Table-1(Ti)	-	18500	excluding GST
Cl-10.1(Number of Tensile Tests)	-	18500	excluding GST
Cl-10.2(Tensile Test Pieces)	-	18500	excluding GST
Cl-11(Impact test)	-	18500	excluding GST
Cl-13.1(Retest)	-	18500	excluding GST
Cl-13.2(Re-heat Treatment)	-	18500	excluding GST
Cl-15, Table-2(Beam, column, channel and angle sections including parallel beam and column sections)	-	18500	excluding GST
Cl-15, Table-2(Tee bars)	-	18500	excluding GST
Cl-15, Table-2(Bulb angles)	-	18500	excluding GST
Cl-15, Table-2(Plates, sheets and strips and flats)	-	18500	excluding GST
Cl-15, Table-2(Round and square bars)	-	18500	excluding GST
Cl-15, Table-2(Bulb flats)	-	18500	excluding GST
Cl-15, Table-2(Channel sections)	-	18500	excluding GST
Cl-15, Table-2(Hollow sections)	-	18500	excluding GST
Cl-15, Table-2(Plates for ship's hull structure)	-	18500	excluding GST
Cl-16(TOLERANCES)	-	18500	excluding GST
Cl-17(CALCLUATION OF MASS)	-	18500	excluding GST
Cl-18(MARKING)	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(C2))	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(Si)	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(Mn2))	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(P)	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(S)	-	18500	excluding GST
Cl-8.1, 8.3, 20, Table-3(Al)	-	18500	excluding GST

31 Dec, 2026

-
Included w.e.f 12.03.2025 Exclusion: Cl 12 Ultrasonic testing

4695

VARDAN ENVIROLAB, GURUGRAM

8169616

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

67000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	180	-
5(DESIGN)	-	180	-
6(SIZE AND FITTINGS)	-	180	-
7.1.1(Whole Footwear)	-	180	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
7.1.5(Energy Absorption at Seat Region)	-	700	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.7(Washability)	-	1000	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	180	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	700	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	700	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	700	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1350	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	600	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1500	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	700	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	700	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2700	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	300	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1000	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1350	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	300	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	700	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	700	-
7.4 , Table No. 5 , i)(Thickness)	-	180	-
7.4 , Table No. 5 , ii)(Flexing index)	-	800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	700	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	700	-
7.5 , Table No. 6 , i)(Thickness)	-	180	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1350	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	700	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	700	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	1000	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1350	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1080	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2700	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	500	-
7.6 , Table No. 7 , vii)(Compression set)	-	800	-
7.7 , Table No. 8 , i)(Compression set)	-	800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	1000	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	500	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	1500	-
7.9 , Table No. 10 , i)(Peel strength)	-	1500	-
7.9 , Table No. 10 , ii)(Shear strength)	-	1500	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	600	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	800	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	900	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	35000	TOTAL PRICE WITH CHEMICAL TEST 67000; WITHOUT CHEMICAL TEST 32000 10% DISCOUNT TO BIS
8(MARKING AND PACKING)	-	180	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2100	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	5000	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2500	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	7000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	500	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	6000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
4(SAMPLING AND CONDITIONING)	-	100	-
5(DESIGN)	-	100	-
6(SIZE AND FITTINGS)	-	100	-
7.1.1(Whole Footwear)	-	180	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
7.1.5(Energy Absorption at Seat Region)	-	630	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.7(Washability)	-	1000	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	180	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	700	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	700	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	500	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	700	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1350	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	500	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	600	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1500	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	700	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	700	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2700	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	300	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1000	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1350	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	300	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	700	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	700	-
7.4 , Table No. 5 , i)(Thickness)	-	180	-
7.4 , Table No. 5 , ii)(Flexing index)	-	800	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	700	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	700	-
7.5 , Table No. 6 , i)(Thickness)	-	180	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1350	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	700	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	700	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	1000	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1350	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1080	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2700	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	500	-
7.6 , Table No. 7 , vii)(Compression set)	-	800	-
7.7 , Table No. 8 , i)(Compression set)	-	800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	1000	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	500	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	800	-
7.8 , Table No. 9 , ii)(Resilience)	-	800	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	800	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	800	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	800	-
7.8 , Table No. 9 , v)(Peel strength)	-	1080	-
7.9 , Table No. 10 , i)(Peel strength)	-	1500	-
7.9 , Table No. 10 , ii)(Shear strength)	-	1500	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	600	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	800	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	800	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	900	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	35000	Total price with chemical testing 67000 without chemical test 32000 10% discount to BIS
8(MARKING AND PACKING)	-	180	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2100	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	5000	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	2500	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	7000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	500	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	6000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
7.1.5(Energy Absorption at Seat Region)	-	700	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	35000	Total price with chemical test 67000 without chemical test 32000 10% discount to BIS
4(SAMPLING AND CONDITIONING)	-	180	-
5(DESIGN)	-	180	-
6(SIZE AND FITTINGS)	-	180	-
7.8 , Table No. 9 , v)(Peel strength)	-	1500	-

26 Dec, 2027

-
-

4696

VARDAN ENVIROLAB, GURUGRAM

8169616

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

63000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	180	-
Cl No.4.2(Construction)	-	100	-
Cl No.4.3(Whole Footwear)	-	100	-
4.3.1(Insole)	-	100	-
4.3.2(Toe spring height)	-	180	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
4.3.6(Energy Absorption at Seat Region)	-	630	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	700	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2700	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1000	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	800	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1080	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1080	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1000	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	900	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	with chemical test 63000; without 28000 per sample 10% discount to BIS
Cl No . 5(MARKING AND PACKING)	-	180	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Clause 4.2 - 4.2.1(Construction)	-	100	-
Clause 4.2 - 4.2.2(Construction)	-	100	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	100	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1080	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1080	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	700	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Clause 4.7, Table 5 i)(Thickness)	-	180	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1080	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	700	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	700	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1080	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1080	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2700	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	1000	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	700	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	100	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	700	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1350	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	700	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.6, Table 4 i)(Thickness)	-	180	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	1350	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	700	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	700	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.1(Sampling and Conditioning)	-	100	-
Cl No.4.2(Construction)	-	100	-
Cl No.4.3(Whole Footwear)	-	100	-
4.3.1(Insole)	-	180	-
4.3.2(Toe spring height)	-	180	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1080	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1080	-
4.3.6(Energy Absorption at Seat Region)	-	630	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	700	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2700	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1000	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	180	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1080	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	700	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1080	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1080	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2700	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	800	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	800	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	800	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	800	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	900	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	-
Cl No . 5(MARKING AND PACKING)	-	180	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Clause 4.2 - 4.2.1(Construction)	-	100	-
Clause 4.2 - 4.2.2(Construction)	-	100	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	100	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1080	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1080	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1080	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	700	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	700	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1080	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	700	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	700	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	1080	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	700	-
Clause 4.7, Table 5 i)(Thickness)	-	180	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1080	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	700	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	700	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1080	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2700	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	180	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	180	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	2100	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	630	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1080	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	35000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	650	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	180	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1080	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	700	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	700	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	180	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	700	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	700	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1500	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	800	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	900	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	180	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	100	-
Clause 4.6, Table 4 i)(Thickness)	-	180	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	1080	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	1000	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	700	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	700	-
Cl No.4.1(Sampling and Conditioning)	-	180	-
4.3.1(Insole)	-	100	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	800	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	800	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1000	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	With chemical test 63000 without 28000 per sample 10% discount to BIS
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	1350	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1080	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	100	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	180	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1080	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	630	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	1000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1080	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	35000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	650	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	700	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	180	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1350	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	700	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	700	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	180	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1080	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	700	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	700	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1080	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	800	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	800	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	800	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	800	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	800	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	800	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	900	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	180	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1350	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	180	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	2100	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1080	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	500	-

26 Dec, 2027

-
-

4697

VARDAN ENVIROLAB, GURUGRAM

8169616

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	100	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	100	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	900	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1350	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1080	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1350	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1080	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	800	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	800	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	800	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	800	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	800	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	800	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2700	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1080	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	35000	WITH CHEMICAL TEST 46000 WITHOUT 11000 10% DISCOUNT TO BIS
Cl. No.9.(MARKING AND PACKING)	-	180	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl. No.8.6.2(Lead content)	-	2000	-
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	100	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	100	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	900	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1350	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1080	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1350	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1080	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	800	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	800	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	800	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	800	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	800	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	800	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2700	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1080	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	35000	With chemical test 47000 without 12000 10% discount to BIS
Cl. No.9.(MARKING AND PACKING)	-	180	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl. No.8.6.2(Lead content)	-	2000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1080	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	800	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1200	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1080	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1080	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1080	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	30000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	650	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	900	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1350	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	150	-

26 Dec, 2027

-
-

4698

VARDAN ENVIROLAB, GURUGRAM

8169616

IS 10702 (2023)

Hawai Chappal-Specification

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	180	-
4.2(Length)	-	180	-
4.3(Thickness)	-	180	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	2000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	180	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	180	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
Clause 4.1 - 4.1.1(Bottom Material)	-	180	-
Clause 4.1 - 4.1.2(Strap Material)	-	180	-
Clause 4.1 - 4.1.3(Material)	-	180	-
Clause 4.1 - 4.1.4(Material)	-	180	-
Clause 4.2(Material)	-	180	-
Clause 4.3 - 4.3.1(Thickness)	-	180	-
Clause 4.3 - 4.3.2(Thickness)	-	180	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	300	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	500	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	2000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	2000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1080	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	300	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	300	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	500	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	500	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	180	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	180	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	180	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	180	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	800	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	800	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1080	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1500	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1500	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.No. 5.2(lead content)	-	1000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	30000	10% off only for BIS Samples
6(MARKING AND PACKING)	-	0	-
4.1(Material)	-	180	-
4.2(Length)	-	180	-
4.3(Thickness)	-	180	-
4.4 , Table No. 1 , i)(Density)	-	180	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	300	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	2000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	180	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	180	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1500	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1500	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1500	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.No. 5.2(lead content)	-	1000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	30000	10% discount for BIS Samples
6(MARKING AND PACKING)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	180	-
Clause 4.1 - 4.1.2(Strap Material)	-	180	-
Clause 4.1 - 4.1.3(Material)	-	180	-
Clause 4.1 - 4.1.4(Material)	-	180	-
Clause 4.2(Material)	-	180	-
Clause 4.3 - 4.3.1(Thickness)	-	180	-
Clause 4.3 - 4.3.2(Thickness)	-	180	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	300	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	500	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	2000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	2000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1080	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	300	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	300	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	500	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	500	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	180	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	180	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	180	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	180	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	800	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	800	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1080	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl.No. 5.2(lead content)	-	650	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	30000	-
6(MARKING AND PACKING)	-	150	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	500	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	2000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	650	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	650	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1080	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	2000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	800	-
Cl.No. 5.2(lead content)	-	500	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	30000	10% Discount for BIS Sample
6(MARKING AND PACKING)	-	500	-
Clause 4.1 - 4.1.1(Bottom Material)	-	500	-
Clause 4.1 - 4.1.2(Strap Material)	-	500	-
Clause 4.1 - 4.1.3(Material)	-	500	-
Clause 4.1 - 4.1.4(Material)	-	500	-
Clause 4.2(Material)	-	500	-
Clause 4.3 - 4.3.1(Thickness)	-	500	-
Clause 4.3 - 4.3.2(Thickness)	-	500	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	500	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	180	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	180	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	800	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	800	-
Cl-4 ((Amendment No-1)(Category And Type)	-	180	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1080	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	500	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1080	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	500	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	500	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	500	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1080	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	30000	10% off only for BIS samples
6(MARKING AND PACKING)	-	100	-
Cl-4 ((Amendment No-1)(Category And Type)	-	100	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1500	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1000	-

26 Dec, 2027

-
-

4699

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1363 : Part 1 (2019)

Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision )

M5-M64

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3-Table 1(Dimensions-d)	-	17500	-
3-Table 1(Dimensions-da(Maximum))	-	17500	-
3-Table 1(Dimensions-ds(Minimum))	-	17500	-
3-Table 1(Dimensions-ds(maximum))	-	17500	-
3-Table 1(Dimensions-dw(minimum))	-	17500	-
3-Table 1(Dimensions-p)	-	17500	-
3-Table 1(Dimensions-b)	-	17500	-
3-Table 1(Dimensions-c(Maximum))	-	17500	-
3-Table 1(Dimensions-e(minimum))	-	17500	-
3-Table 1(Dimensions-k(nominal))	-	17500	-
3-Table 1(Dimensions-k(Minimum))	-	17500	-
3-Table 1(Dimensions-k(maximum))	-	17500	-
3-Table 1(Dimensions-kw(minimum))	-	17500	-
3-Table 1(Dimensions-r(minimum))	-	17500	-
3-Table 1(Dimensions-s(minimum))	-	17500	-
3-Table 1(Dimensions-s(maximum))	-	17500	-
3-Table 1(Dimensions-l(nominal))	-	17500	-
3-Table 1(Dimensions-l(minimum))	-	17500	-
3-Table 1(Dimensions-l(maximum))	-	17500	-
3-Table 1(Dimensions-ls(minimum))	-	17500	-
3-Table 1(Dimensions-lg(maximum))	-	17500	-
3-Table 1(Dimensions-β)	-	17500	-
3-Table 1(Dimensions-u)	-	17500	-
3-Table 2(Dimensions-d)	-	17500	-
3-Table 2(Dimensions-p)	-	17500	-
3-Table 2(Dimensions-b)	-	17500	-
3-Table 2(Dimensions-c(Maximum))	-	17500	-
3-Table 2(Dimensions-da(Maximum))	-	17500	-
3-Table 2(Dimensions-ds(Minimum))	-	17500	-
3-Table 2(Dimensions-ds(maximum))	-	17500	-
3-Table 2(Dimensions-dw(minimum))	-	17500	-
3-Table 2(Dimensions-e(minimum))	-	17500	-
3-Table 2(Dimensions-k(nominal))	-	17500	-
3-Table 2(Dimensions-k(Minimum))	-	17500	-
3-Table 2(Dimensions-k(maximum))	-	17500	-
3-Table 2(Dimensions-kw(minimum))	-	17500	-
3-Table 2(Dimensions-r(minimum))	-	17500	-
3-Table 2(Dimensions-s(minimum))	-	17500	-
3-Table 2(Dimensions-s(maximum))	-	17500	-
3-Table 2(Dimensions-l(nominal))	-	17500	-
3-Table 2(Dimensions-l(minimum))	-	17500	-
3-Table 2(Dimensions-l(maximum))	-	100	-
3-Table 2(Dimensions-ls(minimum))	-	17500	-
3-Table 2(Dimensions-lg(maximum))	-	17500	-
3-Table 2(Dimensions-β)	-	17500	-
3-Table 2(Dimensions-u)	-	17500	-
4-Table 3(General requirements-ISO 8992)	-	17500	-
4-Table 3(Threads-ISO 724 & 965(1))	-	17500	-
4-Table 3(Mechanical property-Property class (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Tensile strength (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Lower yield strength (ISO 898-1) )	-	17500	-
4-Table 3(Mechanical property-Stress at 0,2 % non-proportional elongation (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Stress at 0,0048d non-proportional elongation for full-size fasteners (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Stress under proof load (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Proof strength ratio (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Percentage elongation after fracture for machined test pieces (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Percentage reduction of area after fracture for machined test pieces (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Elongation after fracture for full-size fasteners (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Head soundness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Vickers hardness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Brinell hardness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Surface hardness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Non-carburization (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Height of non-decarburized thread zone (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Depth of complete decarburization in the thread (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Reduction of hardness after retempering (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Breaking torque (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Impact strength (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Quench Cracks(ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging cracks (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screw (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Raw material seams and laps (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Voids (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Folds (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Tool marks (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-- Quench cracks (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Hexagon head screw (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Width (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws-Depth (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Hexagon head screws (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Circular head screws - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Forging cracks in socket head screws- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Raw material, seams and laps- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Voids- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Folds- (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Tool marks - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Laps on the thread - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)-Damages - (ISO 6157-3))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Forging bursts-Circular head screws (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Shear bursts-Circular head screws (ISO 6157-1))	-	17500	-
4-Table 3(Mechanical property-Rockwell hardness (ISO 898-1))	-	17500	-
4-Table 3(Mechanical property-Surface integrity (ISO 898-1)--Damages (ISO 6157-1))	-	17500	-
4(Finish -Electrolite zinc coating)	-	17500	-

31 Dec, 2026

-
-

4700

BIS, Eastern Regional Laboratory (ERL)

None

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-
7.2.1 (Sizes)	-
8, 8.1, 8.2 (Joint in wires, except during stranding)	-
9.2 (Lay ratio)	-
9.4 (Multiple layer of wires)	-

-
Complete

4701

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 18509 (2024)

Cross-recessed Countersunk Head Wood Screws ï¿½ Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	3000	-
Clause. 4.0(Thread size.)	-	3000	-
Clause. 4.0(Length)	-	3000	-
Clause. 5.0(Material)	-	3000	-
Clause. 5.0(Thread And Screw ends)	-	3000	-
Clause. 5.0(Cross Recess)	-	3000	-
Clause. 5.0(Tolerances)	-	3000	-
Clause. 5.0(Surface Condition)	-	3000	-
Clause. 5.0(Surface Coating)	-	3000	-
Clause. 5.0(Acceptability)	-	3000	-
Clause.6.0(Torque Testing)	-	5000	-
Clause.7.0(Hardness)	-	5000	-
Clause.8.0(Designation)	-	3000	-
Clause.9.0(Marking)	-	3000	-

05 Apr, 2027

-
-

4702

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2547 : Part 1 (1976)

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

POP

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Table-1(Beta hemihydrate, SO3)	-	8500	-
Clause 4.1, Table-1(Beta hemihydrate, CaO)	-	8500	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble magnesium salts as MgO)	-	8500	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble sodium salts as Na2O)	-	8500	-
Clause 4.1, Table-1(Beta hemihydrate,. Loss of ignition)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, SO3)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, CaO)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Loss of ignition)	-	8500	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime)	-	8500	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. SO3)	-	8500	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. CaO)	-	8500	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO)	-	8500	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O)	-	8500	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition)	-	8500	-
Clause 4.1, Table-1(Keene's Plaster, SO3)	-	8500	-
Clause 4.1, Table-1(Keene's Plaster, CaO)	-	8500	-
Clause 4.1, Table-1(Keene's Plaster, Soluble magnesium salts as MgO)	-	8500	-
Clause 4.1, Table-1(Keene's Plaster, Soluble sodium salts as Na2O)	-	8500	-
Clause 4.1, Table-1(Keene's Plaster, Loss of ignition)	-	8500	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8500	-
Cl 5.2, Table 3(Transverse Strength)	-	8500	-
Cl 5.2, Table 4(Soundness)	-	8500	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8500	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8500	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8500	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8500	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8500	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8500	-
Cl 5.2, Table 4(Soundness)	-	8500	-
Cl 5.2, Table 3(Transverse Strength)	-	8500	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8500	-
5.1(Purity)	-	8500	-

31 Dec, 2026

-
-

4703

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18480 : Part 2 (2023)

Cross Recessed Tapping Screws Part 2 Countersunk Flat Head

All Grade / Type / Size / Designation as per IS 18480 -II : 2023

19340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	1040	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	18040	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.03.03.2025

4704

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

TYPE- I & II

18993.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	1050	Material Identification
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	-
4.2(Tapes – Linear Density )	-	700	For complete tape testing, IS 6192:2023 charges will be taken.
4.2(Construction)	-	0	-
4.3(Sacks)	-	500	For Visual Inspection
4.3.1(Bottom Seam)	-	500	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	1050	Material Identification
4.4(Mass of the loose liner )	-	500	For GSM
4.4(Width of the loose liner)	-	500	500.00 for liner Visual, Length, width & Thickness
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	for all kind of sack dimensions
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	Rs. 10180.00 for UV Resistance 1100.00 for Lengthwise strength 1100.00 for widthwise strength
5.2 and Table 1 x(Ash content )	-	1200	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	0	-
5.3(UV Resistance)	-	0	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	0	-

09 Aug, 2026

-
Included w.e.f. 13.02.2025

4705

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18480 : Part 1 (2023)

Cross Recessed Tapping Screws: Part 1 Pan Head

All Grade / Type / Size / Designation as per IS 18480-1: 2023

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	1270	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	17110	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f. 03.03.2025

4706

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18509 (2024)

Cross-recessed Countersunk Head Wood Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18509 : 2024

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	580	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Thread And Screw ends)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	16530	-
Clause. 5.0(Surface Coating)	-	460	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
Clause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Thread And Screw ends)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
Clause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.03.03.2025

4707

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	130	-
Cl 3.2(Material used for composite bottom)	-	130	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	130	-
Cl 3.4(Material used for stainless steel lid)	-	130	-
Cl 3.5(Material used for tempered glass lid)	-	130	-
Cl 3.5(Material used for stainless steel rim)	-	130	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	130	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	130	-
Cl 4.2(Thickness of the finished utensil)	-	130	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	130	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	130	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	130	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	130	-
Cl 5.1(Manufacturing defect & visual appearance)	-	130	-
CL 5.2(Accessibility for cleaning)	-	130	-
Cl 5.3(Joining of handles to the utensils)	-	130	-
Cl 5.4(Requirement for handles)	-	130	-
Cl 5.5(Welding (Finish))	-	130	-
Cl 5.6(Finish of 3-ply utensil)	-	130	-
Cl 5.7(Requirement for coating)	-	130	-
Cl 5.8(Coating thickness test)	-	130	-
Cl 5.8.1(Thermal shock test (Coating))	-	130	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	130	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	130	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	130	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	130	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	130	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	130	-
Cl 6.7(Nominal Capacity Test)	-	130	-
Cl 8(Marking)	-	130	-
3.1(a) Carbon)	-	130	-
3.1(b) Silicon)	-	130	-
3.1(c)Manganese)	-	130	-
3.1(d) Nickel)	-	130	-
3.1(Chromium)	-	130	-
3.1(Sulphu)	-	130	-
3.1(Phosphorus)	-	130	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	130	-
3.1(Nitrogen)	-	130	-
3.2 a(a) Carbon)	-	130	-
3.2 a(b) Silicon)	-	130	-
68995(Manganese)	-	130	-
3.2 a(d) Nickel)	-	130	-
3.2 a(Chromium)	-	130	-
3.2 a(Sulphur)	-	130	-
3.2 a(g) Phosphorus)	-	130	-
3.2 a(h) Copper)	-	130	-
3.2 b(c) Magnesium)	-	130	-
3.2 b(d) Silicon)	-	130	-
3.2 a(Nitrogen)	-	130	-
3.2 b(a) Aluminium)	-	130	-
3.2 b(b) Copper)	-	130	-
3.2 b(e) Iron)	-	130	-
3.2 b(f) Manganese)	-	130	-
3.2 b(d) Silicon)	-	130	-
3.2 b(e) Iron)	-	130	-
3.2 b(f) Manganese)	-	130	-
3.2 b(g) Zinc)	-	130	-
3.2 b(h) Titanium)	-	130	-
3.2 b(i) Chromium)	-	130	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	130	-
3.2 b(k) Lead)	-	130	-
3.2 c(a) Carbon)	-	130	-
3.2 c(b) Silicon)	-	130	-
3.2 c(c) Manganese)	-	130	-
3.2 c(d) Nickel)	-	130	-
3.2 c(e) Chromium)	-	130	-
3.2 c(f) Sulphur)	-	130	-
3.2 c(g) Phosphorus)	-	130	-
3.3(a) Inner layer)	-	130	-
3.3(b) Middlelayer)	-	130	-
3.3(c) Outerlayer)	-	130	-
3.4(a) Carbon)	-	130	-
3.4(b) Silicon)	-	130	-
3.4(c) Manganese)	-	130	-
3.4(d) Nickel)	-	130	-
3.4(e) Chromium)	-	130	-
3.4(f) Sulphur)	-	130	-
3.4(g) Phosphorus)	-	130	-
3.4(h) Copper)	-	130	-
3.4(i) Nitrogen)	-	130	-
3.4(Thickness stainless steel lid)	-	130	-
3.5(If the utensils provided with tempered glass lid)	-	130	-
4.1(Shapes and Dimensions)	-	130	-
4.2(Thickness of the sheet)	-	130	-
4.4(Thickness of 3ply full body utensil)	-	130	-
5(Workmanship and finish)	-	130	-
5.4(Handles)	-	130	-
4.1 of IS 13395(Construction)	-	130	-
4.2 of IS 13395(Materials)	-	130	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	130	-
4.5 of IS 13395(Attachment to Cookware)	-	130	-
5.2 of IS 13395(Bending Strength)	-	130	-
5.3 of IS 13395(Torque Strength)	-	130	-
5.4 of IS 13395(Impact Strength)	-	130	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	130	-
5.6 of IS 13395(Leakage)	-	130	-
5.7 of IS 13395(Thermal Insulation)	-	130	-
5.8 of IS 13395(Heat Resistance)	-	130	-
5.9 of IS 13395(Washing Resistance)	-	130	-
5.10 of IS 13395(Burning Resistance)	-	130	-
5.5(Material comes in contact with food)	-	130	-
6.1(Staining Test)	-	130	-
6.2(Mechanical Shock Test)	-	130	-
6.3(Thermal Shock Test)	-	130	-
6.4(Dry Heat Test)	-	130	-
6.6(Heat test)	-	130	-
6.7.1(Nominal Capacity Test)	-	130	-
6.7.2(Internal diameter of utensil)	-	130	-
Cl 5.8(Coating adhesion test)	-	130	-
Cl 4.3(Classification)	-	130	-
4.3 of IS 13395(Selection and Size)	-	130	-
4.3(Classifications)	-	130	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	130	-
4.3(Thickness of protective layer (as per IS 15960))	-	130	-

26 Sep, 2027

-
Included w.e.f. 03.03.2025

4708

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18508

19695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	695	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	16530	-
Clause. 5.0(Surface Coating)	-	460	-
Clause.6.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
CClause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause.6.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
CClause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.03.03.2025

4709

CIPET, KOCHI

6137634

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

39633 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	500	25% discount on test charges
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	Included in test charge for timber
Cl-6.1(Manufacture)	-	0	Included in test charge for timber
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	Included in test charge for timber
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	Included in test charge for timber
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	Included in test charge for timber
Cl-6.5(Manufacture (Scarf joints))	-	0	Included in test charge for timber
Cl-6.6(Manufacture ( Preservative treatment))	-	0	Included in test charge for timber
Cl-7.1(Dimensions -length)	-	375	25% discount on test charges
Cl-7.2(Thickness)	-	187.5	25% discount on test charges
Cl-7.3(Squareness)	-	375	25% discount on test charges
Cl-8.1, 8.2(Workmanship and finish)	-	0	Included in test charge for timber
Cl-10.3(Moisture Content)	-	675	25% discount on test charges
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	25% discount on test charges
Cl-10.5, 10.5.1(Resistance to Water Test)	-	1800	specimen preparation charges
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	specimen preparation charges
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	specimen preparation charges
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	25% discount on test charges
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.8(Tensile Strength)	-	2650	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.11(Retention of Preservative)	-	2750	25% discount on test charges and specimen preparation charges
Cl-10.12(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-5.1(Timber)	-	500	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	375	-
Cl-7.2(Thickness)	-	187.5	-
Cl-7.3(Squareness)	-	375	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	675	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	1325	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	187.5	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1800	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	-
Cl-10.8(Tensile Strength)	-	2650	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	2150	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	2150	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	2150	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	2150	-
Cl-10.11(Retention of Preservative)	-	2750	-
Cl-10.12(Formaldehyde Content Test)	-	2250	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

4710

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18507 (2024)

Drywall Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18507: 2024

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	580	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	15990	-
Clause. 5.0(Surface Coating)	-	1000	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
Clause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
Clause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number