BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

4711

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	2000	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	2000	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	2000	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	5000	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	5000	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	5000	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	5000	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	1000	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	1000	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	1000	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	1000	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	1000	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	2000	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	2000	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	2000	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	5000	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	5000	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	5000	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	5000	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	1000	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	1000	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	1000	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-	-

-
Included w.e.f. 12.11.2025

4712

Sleen India Biz venture Private Limited, Agra

9139736

IS 9202 (2020)

Rolling Bearings — Cylindrical Rollers — Specification ( First Revision )

10750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1( Basic Design)	-	1000	-
5.2(Roller Dimension and Weights)	-	1000	-
5.3(Tolerances)	-	500	-
5.4(Edge Spacing)	-	1000	-
6(Material)	-	2000	-
7(Hardness)	-	2000	-
8(Designation)	-	250	-
9(Manufacture )	-	500	-
10(Finish)	-	2000	-
12(Packing and Marking)	-	500	-

-
Included w.e.f 31.12.2025

4713

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 2618 (2016)

Laboratory glassware - Test tubes (Third Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	5000	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	5000	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	5000	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	7000	-
Cl. No. 6("Marking ")	-	5000	-

-
Included w.e.f. 12.11.2025

4714

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1381 : Part 2 (2019)

Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type)	-	1500	-
4(Series of capacities)	-	3500	-
5(Material)	-	2500	-
5(Material)	-	2500	-
6(Dimensions)	-	3000	-
6(Dimensions)	-	3000	-
6(Dimensions)	-	3000	-
6(Dimensions)	-	3000	-
7(Ground glass joints)	-	1500	-
8(Thermal shock endurance)	-	2500	-
9(Marking)	-	500	-
9(Marking)	-	500	-
9(Marking)	-	500	-
9(Marking)	-	500	-

-
Included w.e.f 04.11.2025

4715

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.2.4(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.3(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.2(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.6(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.11(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	2000	-
25.15(Supply connection and external flexible cords)	-	2000	-
25.14(Supply connection and external flexible cords)	-	2000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	2000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	2000	-
23.6 to 23.10(Internal wiring)	-	2000	-
23.5(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.114(Constructions)	-	2000	-
22.13 to 22.48(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	2000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
16.3(Insulation resistance test)	-	2000	-
16.3(Electric strength test)	-	2000	-
16.1 & 16.2(Leakage current test)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15.1(Moisture resistance)	-	2000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	2000	-
13.3 and Table No.- 4(Electric strength test)	-	2000	-
13.1, 13.2(Leakage current test)	-	2000	-
11.1 to 11.8, Table No.-3(Heating)	-	2000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.14(Legibility & Durability of Markings test)	-	2000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
31(Resistance to rusting)	-	0	Repeated
30.2.4(Resistance to heat and fire)	-	0	Repeated
30.2(Resistance to heat and fire)	-	0	Repeated
30.1(Resistance to heat and fire)	-	0	Repeated
29.3(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.2(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.2(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Repeated
28.2 to 28.4(Screws and connections)	-	0	Repeated
28.1, Table No.-14(Screws and connections)	-	0	Repeated
27.6(Provision for earthing)	-	0	Repeated
27.5(Provision for earthing)	-	0	Repeated
27.1 to 27.4(Provision for earthing)	-	0	Repeated
26.10 & 26.11(Terminals for external conductors)	-	0	Repeated
26.9(Terminals for external conductors)	-	0	Repeated
26.1 to 26.8(Terminals for external conductors)	-	0	Repeated
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Repeated
25.15(Supply connection and external flexible cords)	-	0	Repeated
25.14(Supply connection and external flexible cords)	-	0	Repeated
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Repeated
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Repeated
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Repeated
25.4(Supply connection and external flexible cords)	-	0	Repeated
25.3(Supply connection and external flexible cords)	-	0	Repeated
25.2(Supply connection and external flexible cords)	-	0	Repeated
25.1(Supply connection and external flexible cords)	-	0	Repeated
24.101 to 24.103(Components)	-	0	Repeated
24.2 to 24.6(Components)	-	0	Repeated
24.1(Components)	-	0	Repeated
23.101 to 23.102(Internal wiring)	-	0	Repeated
23.6 to 23.10(Internal wiring)	-	0	Repeated
23.5(Internal wiring)	-	0	Repeated
23.4(Internal wiring)	-	0	Repeated
23.3(Internal wiring)	-	0	Repeated
23.1 & 23.2(Internal wiring)	-	0	Repeated
22.101 to 22.114(Constructions)	-	0	Repeated
22.13 to 22.48(Constructions)	-	0	Repeated
22.12(Constructions)	-	0	Repeated
22.11(Constructions)	-	0	Repeated
22.11(Constructions)	-	0	Repeated
22.7 to 22.10(Constructions)	-	0	Repeated
22.6(Constructions)	-	0	Repeated
22.5(Constructions)	-	0	Repeated
22.4(Constructions)	-	0	Repeated
22.3(Constructions)	-	0	Repeated
22.2(Constructions)	-	0	Repeated
22.1(Constructions)	-	0	Repeated
21.2(MECHANICAL STRENGTH)	-	0	Repeated
21.1(MECHANICAL STRENGTH)	-	0	Repeated
20.2(Stability and mechanical hazards)	-	0	Repeated
20.1(Stability and mechanical hazards)	-	0	Repeated
19.101 and 19.102(ABNORMAL OPERATION)	-	0	Repeated
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	Repeated
17(Overload protection of transformers and associated circuits)	-	0	Repeated
16.3(Insulation resistance test)	-	0	Repeated
16.3(Electric strength test)	-	0	Repeated
16.1 & 16.2(Leakage current test)	-	0	Repeated
15.102(Moisture resistance)	-	0	Repeated
15.102(Moisture resistance)	-	0	Repeated
15.101(Moisture resistance)	-	0	Repeated
15.3(Moisture resistance)	-	0	Repeated
15.2(Moisture resistance)	-	0	Repeated
15.1(Moisture resistance)	-	0	Repeated
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	Repeated
13.3 and Table No.- 4(Electric strength test)	-	0	Repeated
13.1, 13.2(Leakage current test)	-	0	Repeated
11.1 to 11.8, Table No.-3(Heating)	-	0	Repeated
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	Repeated
8.1.5(Protection against access to live parts)	-	0	Repeated
8.1.4(Protection against access to live parts)	-	0	Repeated
8.1.3(Protection against access to live parts)	-	0	Repeated
8.1.2(Protection against access to live parts)	-	0	Repeated
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Repeated
7.14(Legibility & Durability of Markings test)	-	0	Repeated
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	Repeated
31(Resistance to rusting)	-	0	Repeated
30.2.4(Resistance to heat and fire)	-	0	Repeated
30.2(Resistance to heat and fire)	-	0	Repeated
30.1(Resistance to heat and fire)	-	0	Repeated
29.3(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.2(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.2(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Repeated
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	Repeated
28.2 to 28.4(Screws and connections)	-	0	Repeated
28.1, Table No.-14(Screws and connections)	-	0	Repeated
27.6(Provision for earthing)	-	0	Repeated
27.5(Provision for earthing)	-	0	Repeated
27.1 to 27.4(Provision for earthing)	-	0	Repeated
26.10 & 26.11(Terminals for external conductors)	-	0	Repeated
26.9(Terminals for external conductors)	-	0	Repeated
26.1 to 26.8(Terminals for external conductors)	-	0	Repeated
25.16 to 25.25(Supply connection and external flexible cords)	-	0	Repeated
25.15(Supply connection and external flexible cords)	-	0	Repeated
25.14(Supply connection and external flexible cords)	-	0	Repeated
25.9 to 25.13(Supply connection and external flexible cords)	-	0	Repeated
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	Repeated
25.5 to 25.7(Supply connection and external flexible cords)	-	0	Repeated
25.4(Supply connection and external flexible cords)	-	0	Repeated
25.3(Supply connection and external flexible cords)	-	0	Repeated
25.2(Supply connection and external flexible cords)	-	0	Repeated
25.1(Supply connection and external flexible cords)	-	0	Repeated
24.101 to 24.103(Components)	-	0	Repeated
24.2 to 24.6(Components)	-	0	Repeated
24.1(Components)	-	0	Repeated
23.101 to 23.102(Internal wiring)	-	0	Repeated
23.6 to 23.10(Internal wiring)	-	0	Repeated
23.5(Internal wiring)	-	0	Repeated
23.4(Internal wiring)	-	0	Repeated
23.3(Internal wiring)	-	0	Repeated
23.1 & 23.2(Internal wiring)	-	0	Repeated
22.101 to 22.114(Constructions)	-	0	Repeated
22.13 to 22.48(Constructions)	-	0	Repeated
22.12(Constructions)	-	0	Repeated
22.11(Constructions)	-	0	Repeated
22.11(Constructions)	-	0	Repeated
22.7 to 22.10(Constructions)	-	0	Repeated
22.4(Constructions)	-	0	Repeated
22.3(Constructions)	-	0	Repeated
22.2(Constructions)	-	0	Repeated
22.1(Constructions)	-	0	Repeated
21.1(MECHANICAL STRENGTH)	-	0	Repeated
20.2(Stability and mechanical hazards)	-	0	Repeated
20.1(Stability and mechanical hazards)	-	0	Repeated
19.101 and 19.102(ABNORMAL OPERATION)	-	0	Repeated
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	Repeated
17(Overload protection of transformers and associated circuits)	-	0	Repeated
16.3(Insulation resistance test)	-	0	Repeated
16.3(Electric strength test)	-	0	Repeated
16.1 & 16.2(Leakage current test)	-	0	Repeated
15.102(Moisture resistance)	-	0	Repeated
15.102(Moisture resistance)	-	0	Repeated
15.101(Moisture resistance)	-	0	Repeated
15.3(Moisture resistance)	-	0	Repeated
15.2(Moisture resistance)	-	0	Repeated
15.1(Moisture resistance)	-	0	Repeated
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	Repeated
13.3 and Table No.- 4(Electric strength test)	-	0	Repeated
13.1, 13.2(Leakage current test)	-	0	Repeated
11.1 to 11.8, Table No.-3(Heating)	-	0	Repeated
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	Repeated
8.1.5(Protection against access to live parts)	-	0	Repeated
8.1.4(Protection against access to live parts)	-	0	Repeated
8.1.3(Protection against access to live parts)	-	0	Repeated
8.1.2(Protection against access to live parts)	-	0	Repeated
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	Repeated
7.14(Legibility & Durability of Markings test)	-	0	Repeated
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	Repeated
22.6(Constructions)	-	0	Repeated
22.5(Constructions)	-	0	Repeated
21.2(MECHANICAL STRENGTH)	-	0	Repeated
31(Resistance to rusting)	-	-	-
30.2.4(Resistance to heat and fire)	-	-	-
30.2(Resistance to heat and fire)	-	-	-
30.1(Resistance to heat and fire)	-	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-	-
28.2 to 28.4(Screws and connections)	-	-	-
28.1, Table No.-14(Screws and connections)	-	-	-
27.6(Provision for earthing)	-	-	-
27.5(Provision for earthing)	-	-	-
27.1 to 27.4(Provision for earthing)	-	-	-
26.10 & 26.11(Terminals for external conductors)	-	-	-
26.9(Terminals for external conductors)	-	-	-
26.1 to 26.8(Terminals for external conductors)	-	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-	-
25.15(Supply connection and external flexible cords)	-	-	-
25.14(Supply connection and external flexible cords)	-	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-	-
25.4(Supply connection and external flexible cords)	-	-	-
25.3(Supply connection and external flexible cords)	-	-	-
25.2(Supply connection and external flexible cords)	-	-	-
25.1(Supply connection and external flexible cords)	-	-	-
23.101 to 23.102(Internal wiring)	-	-	-
23.6 to 23.10(Internal wiring)	-	-	-
23.5(Internal wiring)	-	-	-
23.4(Internal wiring)	-	-	-
23.3(Internal wiring)	-	-	-
23.1 & 23.2(Internal wiring)	-	-	-
22.101 to 22.114(Constructions)	-	-	-
22.13 to 22.48(Constructions)	-	-	-
22.12(Constructions)	-	-	-
22.11(Constructions)	-	-	-
22.11(Constructions)	-	-	-
22.7 to 22.10(Constructions)	-	-	-
22.6(Constructions)	-	-	-
22.5(Constructions)	-	-	-
22.4(Constructions)	-	-	-
22.3(Constructions)	-	-	-
22.2(Constructions)	-	-	-
22.1(Constructions)	-	-	-
21.2(MECHANICAL STRENGTH)	-	-	-
21.1(MECHANICAL STRENGTH)	-	-	-
20.2(Stability and mechanical hazards)	-	-	-
20.1(Stability and mechanical hazards)	-	-	-
19.101 and 19.102(ABNORMAL OPERATION)	-	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16.3(Insulation resistance test)	-	-	-
16.3(Electric strength test)	-	-	-
16.1 & 16.2(Leakage current test)	-	-	-
15.102(Moisture resistance)	-	-	-
15.102(Moisture resistance)	-	-	-
15.101(Moisture resistance)	-	-	-
15.3(Moisture resistance)	-	-	-
15.2(Moisture resistance)	-	-	-
15.1(Moisture resistance)	-	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-	-
13.3 and Table No.- 4(Electric strength test)	-	-	-
13.1, 13.2(Leakage current test)	-	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-	-
8.1.5(Protection against access to live parts)	-	-	-
8.1.4(Protection against access to live parts)	-	-	-
8.1.3(Protection against access to live parts)	-	-	-
8.1.2(Protection against access to live parts)	-	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-	-
7.14(Legibility & Durability of Markings test)	-	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-	-
31(Resistance to rusting)	-	-	-
30.2.4(Resistance to heat and fire)	-	-	-
30.2(Resistance to heat and fire)	-	-	-
30.1(Resistance to heat and fire)	-	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-	-
28.2 to 28.4(Screws and connections)	-	-	-
28.1, Table No.-14(Screws and connections)	-	-	-
27.6(Provision for earthing)	-	-	-
27.5(Provision for earthing)	-	-	-
27.1 to 27.4(Provision for earthing)	-	-	-
26.10 & 26.11(Terminals for external conductors)	-	-	-
26.9(Terminals for external conductors)	-	-	-
26.1 to 26.8(Terminals for external conductors)	-	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-	-
25.15(Supply connection and external flexible cords)	-	-	-
25.14(Supply connection and external flexible cords)	-	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-	-
25.4(Supply connection and external flexible cords)	-	-	-
25.3(Supply connection and external flexible cords)	-	-	-
25.2(Supply connection and external flexible cords)	-	-	-
25.1(Supply connection and external flexible cords)	-	-	-
23.101 to 23.102(Internal wiring)	-	-	-
23.6 to 23.10(Internal wiring)	-	-	-
23.5(Internal wiring)	-	-	-
23.4(Internal wiring)	-	-	-
23.3(Internal wiring)	-	-	-
23.1 & 23.2(Internal wiring)	-	-	-
22.101 to 22.114(Constructions)	-	-	-
22.13 to 22.48(Constructions)	-	-	-
22.12(Constructions)	-	-	-
22.11(Constructions)	-	-	-
22.11(Constructions)	-	-	-
22.7 to 22.10(Constructions)	-	-	-
22.4(Constructions)	-	-	-
22.3(Constructions)	-	-	-
22.2(Constructions)	-	-	-
22.1(Constructions)	-	-	-
21.1(MECHANICAL STRENGTH)	-	-	-
20.2(Stability and mechanical hazards)	-	-	-
20.1(Stability and mechanical hazards)	-	-	-
19.101 and 19.102(ABNORMAL OPERATION)	-	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16.3(Insulation resistance test)	-	-	-
16.3(Electric strength test)	-	-	-
16.1 & 16.2(Leakage current test)	-	-	-
15.102(Moisture resistance)	-	-	-
15.102(Moisture resistance)	-	-	-
15.101(Moisture resistance)	-	-	-
15.3(Moisture resistance)	-	-	-
15.2(Moisture resistance)	-	-	-
15.1(Moisture resistance)	-	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-	-
13.3 and Table No.- 4(Electric strength test)	-	-	-
13.1, 13.2(Leakage current test)	-	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-	-
8.1.5(Protection against access to live parts)	-	-	-
8.1.4(Protection against access to live parts)	-	-	-
8.1.3(Protection against access to live parts)	-	-	-
8.1.2(Protection against access to live parts)	-	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-	-
7.14(Legibility & Durability of Markings test)	-	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-	-
22.6(Constructions)	-	-	-
22.5(Constructions)	-	-	-
21.2(MECHANICAL STRENGTH)	-	-	-

19 Jul, 2027

-
Included w.e.f. 10.11.2025 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 24.2 to 24.6 (Components) 32 (Radiation, toxicity and similar hazards)

4716

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 4665 : Part 2 : Sec 3 (2023)

Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders

125000 View breakup
-

Clause No.	Exclusion	Remark
5(General Requirements)	-	-
6(Void)	-	-
8(Marking and Instructions )	-	-
9(Protection against access to live parts)	-	-
10(Starting)	-	-
12(Heating)	-	-
13(Leakage current)	-	-
14(Moisture resistance)	-	-
15( Electric strength)	-	-
16(Overload protection of transformers and associated circuits)	-	-
17(Endurance)	-	-
18(Abnormal operation)	-	-
19(Mechanical hazards)	-	-
20(Mechanical strength)	-	-
21(Construction)	-	-
22(Internal wiring)	-	-
23(Components)	-	-
24(Supply connection and external flexible cords)	-	-
25(Terminals for external conductors)	-	-
26(Provision for earthing)	-	-
27(Screws and connections)	-	-
28(Creepage distances, clearances and distances through insulation)	-	-
29(Resistance to heat, fire and tracking)	-	-
30(Resistance to rusting)	-	-
31(Radiation, toxicity and similar hazards)	-	-
11(Input and current)	-	-

05 Apr, 2027

-
Included w.e.f. 18.08.2025

4717

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	500	-
3.3, 4.3(Material )	-	500	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	500	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	1500	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1500	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
5(Marking )	-	500	-

-
Included w.e.f. 09.10.2025

4718

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17635 (2022)

Beds - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	20000	-
CLAUSE 5(Dimensions)	-	20000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	20000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	20000	-
CLAUSE 7(SAFETY TESTS)	-	20000	-
CLAUSE 7.3(Stability Test)	-	20000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	20000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	20000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	20000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	20000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	20000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	20000	-
CLAUSE 7.7(Vertical Impact Test)	-	20000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	20000	-
CLAUSE 8.2(Extendable Storage Elements)	-	20000	-
Cl-5(Dimensions)	-	20000	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	20000	-
Cl-6.1 (b)(Pencil hardness)	-	20000	-
Cl-6.1 (c)(Resistance to wet heat)	-	20000	-
Cl-6.1 (d)(Resistance to dry heat)	-	20000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	20000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	20000	-
Cl-6.1 (g)(Adhesive performance)	-	20000	-
Cl-6.2 (a) 1(Breaking load)	-	20000	-
Cl-6.2 (a) 2(Elongation at break)	-	20000	-
Cl-6.2 (a) 3(Tear strength)	-	20000	-
Cl-6.2 (a) 4(Colour fastness to light)	-	20000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	20000	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	20000	-
Cl-6.2 (a) 7(Colour fastness to water)	-	20000	-
Cl-6.2 (a) 8(Pilling resistance)	-	20000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	20000	-
Cl-6.2 (a) 10(Seam slippage)	-	20000	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	20000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	20000	-
Cl-6.2 (a) 13(Bursting strength)	-	20000	-
Cl-6.2 (a) 14(Resistance to cold)	-	20000	-
Cl-6.2 (b) 1(Tear strength)	-	20000	-
Cl-6.2 (b) 2(Flexing endurance)	-	20000	-
Cl-6.2 (b) 3(Finish adhesion)	-	20000	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	20000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	20000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	20000	-
Cl-6.2 (b) 7(Water vapour permeability)	-	20000	-
Cl-6.2 (b) 8(Colour fastness to water)	-	20000	-
Cl-7.1(Safety Tests)	-	20000	-
Cl-7.2(Safety Tests)	-	20000	-
Cl-7.3(Stability Test)	-	20000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	20000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	20000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	20000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	20000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	20000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	20000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	20000	-
Cl-7.7(Vertical Impact Test)	-	20000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	20000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	20000	-
Cl-10(Marking)	-	1000	-

19 Jul, 2027

-
Included w.e.f.11.08.2025

4719

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 916 (2000)

Square tins for solid products - Specification (Fourth Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Capacity)	-	1000	-
4.2(Dimension and Tolerances)	-	1700	-
4.3.1(Nominal Thickness)	-	500	-
4.3.1(Material of electrolytic tinplate)	-	1000	-
4.3.2(Handle wire diameter)	-	300	-
4.3.1.1(Tin Coating Thickness)	-	1000	-
4.3.2(Handle wire material)	-	1000	-
4.3.3(Solder Tin content)	-	1000	-
4.3.3(Solder Antimony content)	-	500	-
4.4.1(Body)	-	500	-
4.4.2(Sides)	-	500	-
4.4.3(Top and Bottom)	-	500	-
4.4.4(Top and Bottom embossing)	-	500	-
4.4.5(Handle)	-	500	-
4.4.6(Closure)	-	500	-
4.4.7(Supply condition)	-	500	-
4.4.8(Internal Finish)	-	1000	-
4.4.9(External Treatment)	-	500	-
5.1(Air-Pressure Test)	-	3000	-
5.2(Handle Pull Test)	-	3000	-

08 May, 2028

-
Included w.e.f 13.11.2025

4720

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	7000	-
5.2(Message Readability)	-	7000	-
6(Marking)	-	1000	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
4(Requirements)	-	1000	-
5(Tests)	-	0	-
6(Marking)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
4(Requirements)	-	0	-
5(Tests)	-	0	-
6(Marking)	-	0	-

24 Sep, 2026

-
Included w.e.f. 18.08.2025

4721

Rajkot Metlab Services LLP, Rajkot

7183706

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

19200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimensions and Tolerances)	-	1000	-
4.2.1.1(Dimensions and Tolerances )	-	1000	-
4.1(Dimensions and Tolerances)	-	1000	-
4.1(Dimensions and Tolerances)	-	1000	-
4.1(Dimensions and Tolerances)	-	1000	-
4.2.1(Material)	-	1500	-
4.2.1(Material)	-	1500	-
4.2.2(Handle)	-	1500	-
4.3.1 (Manufacture)	-	100	-
4.3.2(Manufacture)	-	100	-
4.3.3(Manufacture)	-	100	-
4.3.4(Manufacture)	-	100	-
4.3.5(Handle)	-	1000	-
4.3.5(Handle)	-	1000	-
4.3.5(Handle)	-	1000	-
4.3.5(Handle)	-	1000	-
4.3.5(Handle)	-	1000	-
5.1(Air-Pressure Test)	-	2500	-
5.2(Handle Pull Test)	-	2500	-
5.3(Hydraulic Pressure Test)	-	2500	-
Cl. 4.3.7,(Internal Finish)	-	100	-
Cl. 4.3.8.(Outside Finish)	-	100	-
Clause 4.2.3(Solder)	-	100	-
Clause 4.2.4(Sealing Compound)	-	100	-
Clause 4.3.6(Supply Condition)	-	100	-
Clause 4.3.7(Internal Finish)	-	100	-
Clause 4.3.8(Outside Finish)	-	100	-
Clause 6(SAMPLING)	-	100	-
Clause 7(MARKING)	-	100	-

12 Jan, 2028

-
Included w.e.f 06.01.2026

4722

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	1000	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-32(Radiation, toxicity and similar hazards)	-	2000	-
Cl-4(General requirement)	-	2000	-
Cl-7(Marking and instructions)	-	2000	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1500	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-19.11.4.1(Electrostatic discharges)	-	3000	-
Cl-19.11.4.3(Fast transient bursts)	-	3000	-
Cl-19.11.4.4(Surge immunity test)	-	3000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	3000	-
Cl-19.11.4.7(Harmonics)	-	3000	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2500	-
Cl-11(Heating)	-	3000	-
Cl-12(Charging of metal-ion batteries)	-	3000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2500	-
Cl-16(Leakage current and electric strength)	-	2500	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	1500	-
Cl-25(Supply connection and external flexible cords)	-	1500	-
Cl-26(Terminals for external conductors)	-	1500	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-19.11.4.1(Electrostatic discharges)	-	2000	-
Cl-19.11.4.3(Fast transient bursts)	-	2000	-
Cl-19.11.4.4(Surge immunity test)	-	2000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
Cl-19.11.4.7(Harmonics)	-	2000	-

15 Oct, 2027

-
Included w.e.f. 11.11.2025 Exclusion: "24 (Components) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

4723

RAHUL ENGINEERS LABORATORY PRIVATE LIMITED

8189106

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

POZZOLANA PORTLAND CEMENT - CALCINED CLAY BASED

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	2400	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	700	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	4000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-

-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 72 ± 1 h)

4724

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 17706 (2022)

PULL HANDLES SPECIFICATION

All Types

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(Materials)	-	0	-
Clause 4.2(Fitting Accessories and Installation)	-	0	-
Clause 4.4(Finish)	-	0	-
Clause 5.1(Corrosion Resistance)	-	25000	Grade 1- 5000/-, Grade 2,3 and 4 - 25000/-
Clause 5.2(Durability)	-	25000	Category 1 - 5000/-, Category 2,3, and 4 - 25000/-
Clause 6(Sampling and criteria for conformity)	-	0	-
Clause 7(Marking)	-	0	-
Clause 8(Packing)	-	0	-
Clause 4.1(Materials)	-	0	-
Clause 4.2(Fitting Accessories and Installation)	-	0	-
Clause 4.4(Finish)	-	0	-
Clause 5.1(Corrosion Resistance)	-	0	-
Clause 5.2(Durability)	-	0	-
Clause 6(Sampling and criteria for conformity)	-	0	-
Clause 7(Marking)	-	0	-
Clause 8(Packing)	-	0	-

-
Included w.e.f. 31.12.2025

4725

Rajkot Metlab Services LLP, Rajkot

7183706

IS 3757 (1985)

Specification for high strength structural bolts (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2 Table-1,2(Dimensions- d)	-	1000	-
2 Table-1,2(Dimensions- p)	-	1000	-
2 Table-1,2(Dimensions- bref)	-	1000	-
2 Table-1,2(Dimensions- c)	-	1000	-
2 Table-1,2(Dimensions- da)	-	1000	-
2 Table-1,2(Dimensions- ds)	-	1000	-
2 Table-1,2(Dimensions- dw)	-	1000	-
2 Table-1,2(Dimensions- e)	-	1000	-
2 Table-1,2(Dimensions- k)	-	1000	-
2 Table-1,2(Dimensions- kw)	-	1000	-
2 Table-1,2(Dimensions- r)	-	1000	-
3 Table-1,2(Dimensions- s)	-	1000	-
4 Table-1,2(Dimensions- z)	-	1000	-
5 Table-1,2(Dimensions- ls)	-	1000	-
6 Table-1,2(Dimensions- lg)	-	1000	-
6 Table-1,2(Dimensions- l)	-	1000	-
6 Table-1,2(Dimensions- Angle)	-	1000	-
2.3(Conformity of threads)	-	1000	-
4(Tensile Test for Machined Test pc- Stress at 0.2% non-propotional elongation)	-	1500	-
4(Tensile Test for Machined Test pc- Tensile Strength)	-	1500	-
4(Tensile Test for Machined Test pc- Elongation)	-	1500	-
4(Tensile Test for Machined Test pc- Reduction area)	-	1500	-
4(Tensile test for full size bolt- Ultimate Tensile Strength)	-	1500	-
4(Tensile test for full size bolt- Vicker's Hardness)	-	1000	-
4(Tensile test for full size bolt- Breaking Position)	-	1500	-
4(Proof load test)	-	1500	-
4(Wedge Load Test)	-	1500	-
4(Head soundness test)	-	1500	-
4(Torsional test)	-	5000	-
4(Surface Integrity Test )	-	1500	-
4(Impact Test)	-	1500	-
4(Hardness test )	-	1500	-
4(Decarburization test)	-	1500	-
4(Surface discountinuties test)	-	1500	-
4(Retempering test)	-	1000	-
5.1(Finish)	-	1000	-
5.2(Galvanization- Uniformity of Zinc Coating)	-	1000	-
5.2(Galvanization - Mass of zinc coating)	-	1000	-
5.2(Galvanization - Passivation Test)	-	1000	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1000	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1000	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1000	-
2 Table-1,2(Dimensions- d)	-	1000	-
2 Table-1,2(Dimensions- p)	-	1000	-
2 Table-1,2(Dimensions- bref)	-	1000	-
2 Table-1,2(Dimensions- c)	-	1000	-
2 Table-1,2(Dimensions- da)	-	1000	-
2 Table-1,2(Dimensions- ds)	-	1000	-
2 Table-1,2(Dimensions- dw)	-	1000	-
2 Table-1,2(Dimensions- e)	-	1000	-
2 Table-1,2(Dimensions- k)	-	1000	-
2 Table-1,2(Dimensions- kw)	-	1000	-
2 Table-1,2(Dimensions- r)	-	1000	-
3 Table-1,2(Dimensions- s)	-	1000	-
4 Table-1,2(Dimensions- z)	-	1000	-
5 Table-1,2(Dimensions- ls)	-	1000	-
6 Table-1,2(Dimensions- lg)	-	1000	-
6 Table-1,2(Dimensions- l)	-	1000	-
6 Table-1,2(Dimensions- Angle)	-	1000	-
2.3(Conformity of threads)	-	1000	-
4(Tensile Test for Machined Test pc- Stress at 0.2% non-propotional elongation)	-	1500	-
4(Tensile Test for Machined Test pc- Tensile Strength)	-	1500	-
4(Tensile Test for Machined Test pc- Elongation)	-	1500	-
4(Tensile Test for Machined Test pc- Reduction area)	-	1500	-
4(Tensile test for full size bolt- Ultimate Tensile Strength)	-	1500	-
4(Tensile test for full size bolt- Vicker's Hardness)	-	1500	-
4(Tensile test for full size bolt- Breaking Position)	-	1500	-
4(Proof load test)	-	1500	-
4(Wedge Load Test)	-	1500	-
4(Head soundness test)	-	1500	-
4(Torsional test)	-	5000	-
4(Surface Integrity Test )	-	1500	-
4(Impact Test)	-	1500	-
4(Hardness test )	-	1500	-
4(Decarburization test)	-	1500	-
4(Surface discountinuties test)	-	1500	-
4(Retempering test)	-	1500	-
5.1(Finish)	-	1500	-
5.2(Galvanization- Uniformity of Zinc Coating)	-	1500	-
5.2(Galvanization - Mass of zinc coating)	-	1500	-
5.2(Galvanization - Passivation Test)	-	1500	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1500	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1500	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	1500	-
2 Table-1,2(Dimensions- d)	-	-	-
2 Table-1,2(Dimensions- p)	-	-	-
2 Table-1,2(Dimensions- bref)	-	-	-
2 Table-1,2(Dimensions- c)	-	-	-
2 Table-1,2(Dimensions- da)	-	-	-
2 Table-1,2(Dimensions- ds)	-	-	-
2 Table-1,2(Dimensions- dw)	-	-	-
2 Table-1,2(Dimensions- e)	-	-	-
2 Table-1,2(Dimensions- k)	-	-	-
2 Table-1,2(Dimensions- kw)	-	-	-
2 Table-1,2(Dimensions- r)	-	-	-
3 Table-1,2(Dimensions- s)	-	-	-
4 Table-1,2(Dimensions- z)	-	-	-
5 Table-1,2(Dimensions- ls)	-	-	-
6 Table-1,2(Dimensions- lg)	-	-	-
6 Table-1,2(Dimensions- l)	-	-	-
6 Table-1,2(Dimensions- Angle)	-	-	-
2.3(Conformity of threads)	-	-	-
4(Tensile Test for Machined Test pc- Stress at 0.2% non-propotional elongation)	-	-	-
4(Tensile Test for Machined Test pc- Tensile Strength)	-	-	-
4(Tensile Test for Machined Test pc- Elongation)	-	-	-
4(Tensile Test for Machined Test pc- Reduction area)	-	-	-
4(Tensile test for full size bolt- Ultimate Tensile Strength)	-	-	-
4(Tensile test for full size bolt- Vicker's Hardness)	-	-	-
4(Tensile test for full size bolt- Breaking Position)	-	-	-
4(Proof load test)	-	-	-
4(Wedge Load Test)	-	-	-
4(Head soundness test)	-	-	-
4(Torsional test)	-	-	-
4(Surface Integrity Test )	-	-	-
4(Impact Test)	-	-	-
4(Hardness test )	-	-	-
4(Decarburization test)	-	-	-
4(Surface discountinuties test)	-	-	-
4(Retempering test)	-	-	-
5.1(Finish)	-	-	-
5.2(Galvanization- Uniformity of Zinc Coating)	-	-	-
5.2(Galvanization - Mass of zinc coating)	-	-	-
5.2(Galvanization - Passivation Test)	-	-	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	-	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	-	-
5.2(Galvanization - Adhesion of Zinc Coating)	-	-	-

12 Jan, 2028

-
Included w.e.f 27.01.2026

4726

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2047 (1992)

Aluminium alloy hardeners (Master Alloys) - Specification (Second Revision)

All Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirement)	-	12000	-
4(Manufacture )	-	0	-
5.1(Chemical Composition)	-	12000	-
6(Freedom from Defects)	-	12000	-
8(Packing)	-	0	-
9(Marking)	-	0	-

-
Included w.e.f 16.09.2025

4727

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1(Sample preparation as per clause 8 of IS 9873 Part 3:1999)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-i(Sb)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-ii(As)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-iii(Ba)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-iv(Cd)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-v(Cr)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-vi(Pb)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-vii(Hg)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-viii(Se)	-	250	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	250	-
4.1(Sample preparation as per clause 8 of IS 9873 Part 3:1999)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-i(Sb)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-ii(As)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-iii(Ba)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-iv(Cd)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-v(Cr)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-vi(Pb)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-vii(Hg)	-	250	-
Cl-4.1 & 4.2,Table 1,sl.no-viii(Se)	-	250	-

20 Aug, 2027

-
Included w.e.f.16.09.2025

4728

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	NIL
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	NIL
16.5, Table 2(Breaking Load Test - after stranding)	-	11000	NIL
16.6, Table 1(Elongation Test - before stranding)	-	2500	NIL
16.6, Table 1(Elongation Test - after stranding)	-	4500	NIL
16.7, Table 2(Resistivity Test)	-	12500	NIL
16.8(Wrapping Test)	-	4000	NIL
11(Stranding)	-	2000	NIL
8(Freedom from defects)	-	1000	NIL
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	NIL
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	NIL
16.11(Stress-strain Test)	-	40000	NIL
16.2(Visual Examination)	-	1000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	NIL
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	NIL
16.5, Table 2(Breaking Load Test - after stranding)	-	11000	NIL
16.6, Table 1(Elongation Test - before stranding)	-	2500	NIL
16.6, Table 1(Elongation Test - after stranding)	-	4500	NIL
16.7, Table 2(Resistivity Test)	-	12500	NIL
16.8(Wrapping Test)	-	4000	NIL
11(Stranding)	-	2000	NIL
8(Freedom from defects)	-	1000	NIL
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	NIL
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	NIL
16.11(Stress-strain Test)	-	40000	NIL

06 Jun, 2027

-
Included w.e.f. 16.10.2025

4729

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS/ISO 834 : Part 8 (2002)

Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

4730

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS/ISO 834 : Part 1 (1999)

Fire-Resistance Tests Elements of Building Construction Part 1 General Requirements

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

4731

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(Nominal Capacity)	-	1000	-
Table 1(Internal Neck Diameter)	-	1500	-
8.1(Material)	-	500	-
Table 1(Distance of graduation line)	-	500	-
Table 1(Overall Height)	-	1500	-
Table 1(Bulb Diameter)	-	1500	-
Table 1(Base Diameter)	-	1500	-
Table 1(Wall Thickness)	-	500	-
Table 1(Ground joint k4)	-	1000	-
Table 1(Ground joint k6)	-	1000	-
8.3(Shape)	-	1000	-
8.4(Neck)	-	800	-
8.5(Stopper)	-	700	-
8.6(Dimensions)	-	1500	-
9.0(Graduation Line)	-	500	-
Table-2(Nominal capacity)	-	1000	-
Table-2(Internal neck diameter)	-	1500	-
Table-2(Distance of graduation line 1))	-	1500	-
Table-2(Overall height 2))	-	1500	-
Table-2(Bulb diameter)	-	1500	-
Table-2(Base diameter)	-	1500	-
Table-2(Wall thickness)	-	500	-
Table-2(Ground joint 3) k4)	-	1000	-
Table-2(Ground joint 3) k6)	-	1000	-
12.1(Visibility of graduation line, figures and marking)	-	500	-
12.2(Visibility of graduation line, figures and marking)	-	500	-
Clause. 7.0(Accuracy)	-	1000	-

-
Included w.e.f. 21.08.2025

4732

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 17518 : Part 1 (2022)

Fire resistance tests Door and shutter assemblies Part 1: General requirements Adoption of ISO 3008-1:2019

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation)	-	350000		-

-
Included w.e.f. 06.11.2025

4733

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	500	-
31(Resistance to Rusting)	-	500	-
30(Resistance to Heat & Fire)	-	500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	500	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
24(Component)	-	500	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
16(Leakage Current and Electric Strength)	-	500	-
11(Temperature Rise/Heating)	-	500	-
10(Power Input & Current)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
32(Radiation ,Toxicity and similar hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30(Resistance to Heat & Fire)	-	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-	-
28(Screws & Connection)	-	-	-
27(Provision For Earthing)	-	-	-
26(Terminals For External Conductors)	-	-	-
25(Supply Connection & External Flexible Cables and Cords)	-	-	-
24(Component)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical strength)	-	-	-
20(Stability & Mechanical Hazards)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-	-
16(Leakage Current and Electric Strength)	-	-	-
11(Temperature Rise/Heating)	-	-	-

22 Jul, 2028

-
Included w.e.f. 29.09.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 15 (Moisture Resistance) "

4734

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

Electrical

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	Additional Testing Charge For EMI/EMC:- 20,0000/-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	1500	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	5000	-
15.3(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2500	-
19.2(Abnormal Operation, IS 302-1)	-	10000	-
19.2(Abnormal Operation, IS 302-1)	-	0	-
19.3(Abnormal Operation, IS 302-1)	-	0	-
19.3(Abnormal Operation, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2500	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	2500	-
22(Construction, IS 302-1)	-	5000	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.105.1(Construction)	-	0	-
22.105.2(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
11.107.1(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	5000	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	5000	-
24.2(Components, IS 302-1)	-	0	-
24.101(Components)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25.4(Supply Connection and External Flexible Cords)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	2500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	5000	-
27.1(Provision for Earthing, IS 302-1)	-	5000	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	5000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	5000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	5000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	2500	-
19.11.4.7(Harmonics)	-	25000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	-
19.11.4.5(Immunity to conducted discharges)	-	30000	-
19.11.4.4(Surge immunity test)	-	25000	-
19.11.4.3(Fast transient bursts)	-	25000	-
19.11.4.2(Radiated fields)	-	45000	-
19.11.4.1(Electrostatic discharges)	-	25000	-

-
Included w.e.f 11.08.2025

4735

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 16947 (2018)

Fire resistance tests for doors with glass panes, openable glass windows and sliding glass doors

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9(Integrity, Insulation, Radiation)	-	450000		-

-
Included w.e.f. 06.11.2025

4736

IEC TEST LABS LLP

8165726

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Complete for Unscreened Cable rated Up to and Including 3.3/3.3 kV.

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	1000	Rs.125000/- for Rated Voltage Up to 3.3/3.3 kV (Only 3.3/3.3 Grade)
4.1.1(CONDUCTOR)	-	1000	-
5(INSULATION)	-	1000	-
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	1000	-
7(FILLERS AND INNER SHEATH)	-	1000	-
8.1(ARMOURING)	-	1000	-
8.2(ARMOURING)	-	1000	-
9(OUTER SHEATH )	-	1000	-
10.1(CONDUCTOR)	-	1000	-
10.2(CONDUCTOR)	-	1000	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	1000	-
12.2(INSULATION : Thickness of Insulation)	-	2000	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	2000	-
12.4(Eccentricity and Ovality)	-	2000	-
12.5(INSULATION : Application of Insulation)	-	1000	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	1000	-
14.1.1(CORE IDENTIFICATION)	-	1000	-
15.1(LAVING UP OF CORES)	-	1000	-
16.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
17.1(ARMOURING : Application )	-	1000	-
17.1.1(ARMOURING )	-	1000	-
17.1.2(ARMOURING )	-	1000	-
17.1.3(ARMOURING )	-	1000	-
17.2(ARMOURING : Type of armour )	-	1000	-
17.2.1(ARMOURING : Type of armour )	-	1000	-
17.2(ARMOURING : Coverage )	-	1000	-
17.3(ARMOURING : Dimension )	-	1000	-
17.4(ARMOURING : Joints)	-	1000	-
16.4(ARMOURING : Resistance)	-	2000	-
18.1(OUTER SHEATH)	-	1000	-
18.2(OUTER SHEATH: Colour)	-	1000	-
18.3(Thicknes of outer sheath : average )	-	2000	-
18.3(Thicknes of outer sheath : minimum )	-	2000	-
19.1 i) a)(Annealing test (for copper))	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	2000	-
19.1 i) c)(Wrapping test ( for aluminium))	-	2000	-
19.1 i) d)(Resistance test - Main conductor )	-	2000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	2000	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2000	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	2000	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
19.1 iii) c)(Degree of cross linking )	-	5000	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	2000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	2000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	2000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	2000	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	10000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	0	-
19.1 v) b)(Volume resistivity)	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	2000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	2000	-
19.1 vi) d)(Sheath : Hot deformation)	-	2000	-
19.1 vi) e)(Loss of massIn air oven)	-	5000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2000	-
19.1 vi) g)(Sheath : Thermalstability)	-	2000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	2000	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	5000	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	5000	-
20.2(Partial discharge test)	-	0	-
20.3(Bending test)	-	0	-
20.4(Dielectric power factor test : As a function of voltage)	-	0	-
20.4(Dielectric power factor test : As a function of temperature)	-	0	-
20.5(Heating Cycle Test)	-	0	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	0	-
20.7(High voltage test)	-	5000	-
20.8(Flammability test)	-	5000	-
20.1(Oxygen Index Test)	-	5000	-
20.11(Flame Retardance Test on Single Cables)	-	2000	-
20.12(Flame Retardance Test on Bunched Cables)	-	10000	-
20.13(Test for Halogen Acid Gas Evolution)	-	10000	-
20.14( Test for Smoke Density)	-	5000	-
20.15(Temperature Index)	-	5000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	1000	-
21.2(IDENTIFICATION : Cable Identification)	-	1000	-
21.3(IDENTIFICATION : Cable Code)	-	1000	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	0	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	0	-
Cl. 8(Conductor)	-	1000	-
Cl. 8(Conductor)	-	1000	-
Cl. 8(Conductor)	-	1000	-
Cl.8 & 17(Armouring)	-	1000	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	2000	-
Cl.8 & 17(Armouring : Tensile Strength)	-	2000	-
Cl.8 & 17(Armouring : Elongation)	-	2000	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	2000	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	2000	-
Cl.8 & 17(Armouring : Application)	-	1000	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring : Resistivity Test)	-	2000	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	2000	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	2000	-
4.1(CONDUCTOR)	-	1000	-
4.1.1(CONDUCTOR)	-	1000	-
5(INSULATION)	-	1000	-
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	5000	-
7(FILLERS AND INNER SHEATH)	-	1000	-
8.1(ARMOURING)	-	1000	-
8.2(ARMOURING)	-	1000	-
9(OUTER SHEATH )	-	1000	-
10.1(CONDUCTOR)	-	1000	-
10.2(CONDUCTOR)	-	1000	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	1000	-
12.2(INSULATION : Thickness of Insulation)	-	2000	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	2000	-
12.4(Eccentricity and Ovality)	-	2000	-
12.5(INSULATION : Application of Insulation)	-	1000	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	1000	-
14.1.1(CORE IDENTIFICATION)	-	1000	-
15.1(LAVING UP OF CORES)	-	1000	-
16.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	2000	-
17.1(ARMOURING : Application )	-	1000	-
17.1.1(ARMOURING )	-	1000	-
17.1.2(ARMOURING )	-	1000	-
17.1.3(ARMOURING )	-	1000	-
17.2(ARMOURING : Type of armour )	-	1000	-
17.2.1(ARMOURING : Type of armour )	-	1000	-
17.2(ARMOURING : Coverage )	-	2000	-
17.3(ARMOURING : Dimension )	-	2000	-
17.4(ARMOURING : Joints)	-	2000	-
16.4(ARMOURING : Resistance)	-	2000	-
18.1(OUTER SHEATH)	-	1000	-
18.2(OUTER SHEATH: Colour)	-	1000	-
18.3(Thicknes of outer sheath : average )	-	2000	-
18.3(Thicknes of outer sheath : minimum )	-	2000	-
19.1 i) a)(Annealing test (for copper))	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	2000	-
19.1 i) c)(Wrapping test ( for aluminium))	-	2000	-
19.1 i) d)(Resistance test - Main conductor )	-	5000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	5000	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2000	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	2000	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
19.1 iii) c)(Degree of cross linking )	-	5000	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	2000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	2000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	2000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	2000	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	10000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	0	-
19.1 v) b)(Volume resistivity)	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	2000	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	2000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	2000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	2000	-
19.1 vi) d)(Sheath : Hot deformation)	-	2000	-
19.1 vi) e)(Loss of massIn air oven)	-	5000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2000	-
19.1 vi) g)(Sheath : Thermalstability)	-	5000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	5000	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	2000	-
20.2(Partial discharge test)	-	0	-
20.3(Bending test)	-	0	-
20.4(Dielectric power factor test : As a function of voltage)	-	0	-
20.4(Dielectric power factor test : As a function of temperature)	-	0	-
20.5(Heating Cycle Test)	-	0	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	0	-
20.7(High voltage test)	-	5000	-
20.8(Flammability test)	-	2000	-
20.1(Oxygen Index Test)	-	5000	-
20.11(Flame Retardance Test on Single Cables)	-	5000	-
20.12(Flame Retardance Test on Bunched Cables)	-	10000	-
20.13(Test for Halogen Acid Gas Evolution)	-	5000	-
20.14( Test for Smoke Density)	-	5000	-
20.15(Temperature Index)	-	5000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	2000	-
21.2(IDENTIFICATION : Cable Identification)	-	2000	-
21.3(IDENTIFICATION : Cable Code)	-	2000	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	0	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	0	-
Cl. 8(Conductor)	-	2000	-
Cl. 8(Conductor)	-	2000	-
Cl. 8(Conductor)	-	2000	-
Cl.8 & 17(Armouring)	-	2000	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	2000	-
Cl.8 & 17(Armouring : Tensile Strength)	-	2000	-
Cl.8 & 17(Armouring : Elongation)	-	2000	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	2000	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	2000	-
Cl.8 & 17(Armouring : Application)	-	2000	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring : Resistivity Test)	-	2000	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	2000	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	2000	-
4.1(CONDUCTOR)	-	1000	-
4.1.1(CONDUCTOR)	-	1000	-
5(INSULATION)	-	1000	-
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	1000	-
7(FILLERS AND INNER SHEATH)	-	1000	-
8.1(ARMOURING)	-	1000	-
8.2(ARMOURING)	-	1000	-
9(OUTER SHEATH )	-	1000	-
10.1(CONDUCTOR)	-	1000	-
10.2(CONDUCTOR)	-	1000	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	1000	-
12.2(INSULATION : Thickness of Insulation)	-	2000	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	2000	-
12.4(Eccentricity and Ovality)	-	2000	-
12.5(INSULATION : Application of Insulation)	-	1000	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	1000	-
14.1.1(CORE IDENTIFICATION)	-	1000	-
15.1(LAVING UP OF CORES)	-	1000	-
16.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2(INNER SHEATH (COMMON COVERING))	-	1000	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	1000	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	2000	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	2000	-
17.1(ARMOURING : Application )	-	1000	-
17.1.1(ARMOURING )	-	2000	-
17.1.2(ARMOURING )	-	2000	-
17.1.3(ARMOURING )	-	2000	-
17.2(ARMOURING : Type of armour )	-	2000	-
17.2.1(ARMOURING : Type of armour )	-	2000	-
17.2(ARMOURING : Coverage )	-	2000	-
17.3(ARMOURING : Dimension )	-	2000	-
17.4(ARMOURING : Joints)	-	2000	-
16.4(ARMOURING : Resistance)	-	2000	-
18.1(OUTER SHEATH)	-	1000	-
18.2(OUTER SHEATH: Colour)	-	1000	-
18.3(Thicknes of outer sheath : average )	-	2000	-
18.3(Thicknes of outer sheath : minimum )	-	2000	-
19.1 i) a)(Annealing test (for copper))	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	2000	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	2000	-
19.1 i) c)(Wrapping test ( for aluminium))	-	2000	-
19.1 i) d)(Resistance test - Main conductor )	-	2000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	2000	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2000	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	2000	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
19.1 iii) c)(Degree of cross linking )	-	2000	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	5000	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	5000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	2000	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	2000	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	5000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	0	-
19.1 v) b)(Volume resistivity)	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	2000	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	2000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	2000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	2000	-
19.1 vi) d)(Sheath : Hot deformation)	-	2000	-
19.1 vi) e)(Loss of massIn air oven)	-	5000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2000	-
19.1 vi) g)(Sheath : Thermalstability)	-	5000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	5000	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	5000	-
20.2(Partial discharge test)	-	0	-
20.3(Bending test)	-	0	-
20.4(Dielectric power factor test : As a function of voltage)	-	0	-
20.4(Dielectric power factor test : As a function of temperature)	-	0	-
20.5(Heating Cycle Test)	-	0	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	0	-
20.7(High voltage test)	-	5000	-
20.8(Flammability test)	-	5000	-
20.1(Oxygen Index Test)	-	5000	-
20.11(Flame Retardance Test on Single Cables)	-	5000	-
20.12(Flame Retardance Test on Bunched Cables)	-	10000	-
20.13(Test for Halogen Acid Gas Evolution)	-	5000	-
20.14( Test for Smoke Density)	-	5000	-
20.15(Temperature Index)	-	5000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	2000	-
21.2(IDENTIFICATION : Cable Identification)	-	2000	-
21.3(IDENTIFICATION : Cable Code)	-	2000	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	0	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	0	-
Cl. 8(Conductor)	-	1000	-
Cl. 8(Conductor)	-	1000	-
Cl. 8(Conductor)	-	1000	-
Cl.8 & 17(Armouring)	-	1000	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	2000	-
Cl.8 & 17(Armouring : Tensile Strength)	-	2000	-
Cl.8 & 17(Armouring : Elongation)	-	2000	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	2000	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	2000	-
Cl.8 & 17(Armouring : Application)	-	1000	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	2000	-
Cl.8 & 17(Armouring : Resistivity Test)	-	2000	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	2000	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	2000	-
4.1(CONDUCTOR)	-	0	-
4.1.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	0	-
7(FILLERS AND INNER SHEATH)	-	0	-
8.1(ARMOURING)	-	0	-
8.2(ARMOURING)	-	0	-
9(OUTER SHEATH )	-	0	-
10.1(CONDUCTOR)	-	0	-
10.2(CONDUCTOR)	-	0	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	0	-
12.2(INSULATION : Thickness of Insulation)	-	0	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	0	-
12.4(Eccentricity and Ovality)	-	0	-
12.5(INSULATION : Application of Insulation)	-	0	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	0	-
14.1.1(CORE IDENTIFICATION)	-	0	-
15.1(LAVING UP OF CORES)	-	0	-
16.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.2(INNER SHEATH (COMMON COVERING))	-	0	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
17.1(ARMOURING : Application )	-	0	-
17.1.1(ARMOURING )	-	0	-
17.1.2(ARMOURING )	-	0	-
17.1.3(ARMOURING )	-	0	-
17.2(ARMOURING : Type of armour )	-	0	-
17.2.1(ARMOURING : Type of armour )	-	0	-
17.2(ARMOURING : Coverage )	-	0	-
17.3(ARMOURING : Dimension )	-	0	-
17.4(ARMOURING : Joints)	-	0	-
16.4(ARMOURING : Resistance)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(OUTER SHEATH: Colour)	-	0	-
18.3(Thicknes of outer sheath : average )	-	0	-
18.3(Thicknes of outer sheath : minimum )	-	0	-
19.1 i) a)(Annealing test (for copper))	-	0	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	0	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	0	-
19.1 i) c)(Wrapping test ( for aluminium))	-	0	-
19.1 i) d)(Resistance test - Main conductor )	-	0	-
19.1 i) d)(Resistance test - Neutral conductor )	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	0	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
19.1 iii) c)(Degree of cross linking )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	0	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	0	-
19.1 v) b)(Volume resistivity)	-	0	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	0	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
19.1 vi) d)(Sheath : Hot deformation)	-	0	-
19.1 vi) e)(Loss of massIn air oven)	-	0	-
19.1 vi) f)(Sheath : Heat shock test)	-	0	-
19.1 vi) g)(Sheath : Thermalstability)	-	0	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	0	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	0	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	0	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	0	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	0	-
20.2(Partial discharge test)	-	0	-
20.3(Bending test)	-	0	-
20.4(Dielectric power factor test : As a function of voltage)	-	0	-
20.4(Dielectric power factor test : As a function of temperature)	-	0	-
20.5(Heating Cycle Test)	-	0	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	0	-
20.7(High voltage test)	-	0	-
20.8(Flammability test)	-	0	-
20.1(Oxygen Index Test)	-	0	-
20.11(Flame Retardance Test on Single Cables)	-	0	-
20.12(Flame Retardance Test on Bunched Cables)	-	0	-
20.13(Test for Halogen Acid Gas Evolution)	-	0	-
20.14( Test for Smoke Density)	-	0	-
20.15(Temperature Index)	-	0	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	0	-
21.2(IDENTIFICATION : Cable Identification)	-	0	-
21.3(IDENTIFICATION : Cable Code)	-	0	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	0	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	0	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl.8 & 17(Armouring)	-	0	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	0	-
Cl.8 & 17(Armouring : Tensile Strength)	-	0	-
Cl.8 & 17(Armouring : Elongation)	-	0	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	0	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	0	-
Cl.8 & 17(Armouring : Application)	-	0	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring : Resistivity Test)	-	0	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	0	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	0	-
4.1(CONDUCTOR)	-	0	-
4.1.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	0	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	0	-
7(FILLERS AND INNER SHEATH)	-	0	-
8.1(ARMOURING)	-	0	-
8.2(ARMOURING)	-	0	-
9(OUTER SHEATH )	-	0	-
10.1(CONDUCTOR)	-	0	-
10.2(CONDUCTOR)	-	0	-
11(CONDUCTOR SCREENING)	-	0	-
12.1(INSULATION)	-	0	-
12.2(INSULATION : Thickness of Insulation)	-	0	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	0	-
12.4(Eccentricity and Ovality)	-	0	-
12.5(INSULATION : Application of Insulation)	-	0	-
13.1(INSULATION SCREENING)	-	0	-
13.2(INSULATION SCREENING)	-	0	-
13.3(INSULATION SCREENING)	-	0	-
13.4(INSULATION SCREENING)	-	0	-
14.1(CORE IDENTIFICATION)	-	0	-
14.1.1(CORE IDENTIFICATION)	-	0	-
15.1(LAVING UP OF CORES)	-	0	-
16.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.2(INNER SHEATH (COMMON COVERING))	-	0	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	0	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	0	-
17.1(ARMOURING : Application )	-	0	-
17.1.1(ARMOURING )	-	0	-
17.1.2(ARMOURING )	-	0	-
17.1.3(ARMOURING )	-	0	-
17.2(ARMOURING : Type of armour )	-	0	-
17.2.1(ARMOURING : Type of armour )	-	0	-
17.2(ARMOURING : Coverage )	-	0	-
17.3(ARMOURING : Dimension )	-	0	-
17.4(ARMOURING : Joints)	-	0	-
16.4(ARMOURING : Resistance)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(OUTER SHEATH: Colour)	-	0	-
18.3(Thicknes of outer sheath : average )	-	0	-
18.3(Thicknes of outer sheath : minimum )	-	0	-
19.1 i) a)(Annealing test (for copper))	-	0	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	0	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	0	-
19.1 i) c)(Wrapping test ( for aluminium))	-	0	-
19.1 i) d)(Resistance test - Main conductor )	-	0	-
19.1 i) d)(Resistance test - Neutral conductor )	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	0	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	0	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
19.1 iii) c)(Degree of cross linking )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	0	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	0	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	0	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	0	-
19.1 v) b)(Volume resistivity)	-	0	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	0	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	0	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
19.1 vi) d)(Sheath : Hot deformation)	-	0	-
19.1 vi) e)(Loss of massIn air oven)	-	0	-
19.1 vi) f)(Sheath : Heat shock test)	-	0	-
19.1 vi) g)(Sheath : Thermalstability)	-	0	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	0	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	0	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	0	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	0	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	0	-
20.2(Partial discharge test)	-	0	-
20.3(Bending test)	-	0	-
20.4(Dielectric power factor test : As a function of voltage)	-	0	-
20.4(Dielectric power factor test : As a function of temperature)	-	0	-
20.5(Heating Cycle Test)	-	0	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	0	-
20.7(High voltage test)	-	0	-
20.8(Flammability test)	-	0	-
20.1(Oxygen Index Test)	-	0	-
20.11(Flame Retardance Test on Single Cables)	-	0	-
20.12(Flame Retardance Test on Bunched Cables)	-	0	-
20.13(Test for Halogen Acid Gas Evolution)	-	0	-
20.14( Test for Smoke Density)	-	0	-
20.15(Temperature Index)	-	0	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	0	-
21.2(IDENTIFICATION : Cable Identification)	-	0	-
21.3(IDENTIFICATION : Cable Code)	-	0	-
20.3 (a)(Partial discharge test (Bending test))	-	0	-
20.5 (a)(PD test (heating cycle test))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	0	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	0	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	0	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl. 8(Conductor)	-	0	-
Cl.8 & 17(Armouring)	-	0	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	0	-
Cl.8 & 17(Armouring : Tensile Strength)	-	0	-
Cl.8 & 17(Armouring : Elongation)	-	0	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	0	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	0	-
Cl.8 & 17(Armouring : Application)	-	0	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	0	-
Cl.8 & 17(Armouring : Resistivity Test)	-	0	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	0	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	0	-
Cl-20.16 (Amendment No-2)(Longitudinal Water Penetration Test)	-	20000	-

07 Sep, 2029

-
Included w.e.f 04.02.2026

4737

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 16945 (2018)

Fire resistance test for glass walls

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation, Radiation)	-	425000		-

-
Included w.e.f. 06.11.2025

4738

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	-	-
6(Classification- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.101(Marking)	-	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.3(Moisture Resistance, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation)	-	-	-
19.9(Abnormal Operation)	-	-	-
19.1(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.101(Mechanical Strength, IS 302-2-3)	-	-	-
22(Construction, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22.102(Construction)	-	-	-
22.103(Construction)	-	-	-
22.104(Construction)	-	-	-
22.105(Construction)	-	-	-
22.106(Construction)	-	-	-
22.107(Construction)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
4(General requirement)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.7(Harmonics)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
19(Abnormal operation)	-	-	-
25(Supply Connection and External Flexible Cords)	-	-	-

15 Oct, 2027

-
Included w.e.f. 11.11.2025 Exclusion: "24.1 (Components, IS 302-1) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

4739

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

CM ,CS,CD nominal diameter up to 200 mm

12600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100.00	-
9.5(Tensile Strength IS 12235(Part 13))	-	1300.00	Sample Preparation: 500.00
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000.00	Sample Preparation: 500.00
9.3(Density IS 12235 (Part 14))	-	700.00	-
9.2(Internal Diameter)	-	1000.00	Sample Preparation: 500.00
9.1( Visual Appearance)	-	500.00	-
9.1(Visual Appearance)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	500.00	-
8.4(Sealing rings - Hardness)	-	500.00	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500.00	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500.00	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500.00	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500.00	-
7.3.2(Rib height)	-	500.00	-
7.3.1(No.of Ribs)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500.00	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500.00	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500.00	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500.00	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1200.00	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1200.00	-
5(COLOUR)	-	500.00	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	500.00	-
8.4(Width b)	-	500.00	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	500.00	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	500.00	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	500.00	-
5.0(Colour of Pipes)	-	500.00	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000.00	-
4.1.2(K-Value as per IS-4669)	-	1000.00	-
7.1(Screen Pipes)	-	0.00	-
11(Marking)	-	500.00	-
5.1(Materials)	-	0.00	-
8(Packing)	-	0.00	-
4.1.3(Cross Chain Length)	-	0.00	-
7.2(Link Twisted (Cross chain))	-	0.00	-
7.3(The Basic chains)	-	0.00	-
7.9(Case Depth)	-	0.00	-
8(Marking)	-	0.00	-
Cl 9.7(Effect on Water Lead (first extraction))	-	3000.00	-
Cl 9.7(Effect on Water Lead (third extraction))	-	3000.00	-
Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	3000.00	-
Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000.00	-
Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000.00	-

09 Aug, 2029

-
Included w.e.f.05.08.2025 Exclusion Cl 4.1.1 (VCM Content as per IS 10151 (Annex A))

4740

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	1000	-
Table-1(Overall height)	-	1000	-
Table-1(Distance from top of scale to top of cylinder)	-	1000	-
Table-1(Internal height to highest graduation line)	-	1000	-
Table-1(Sub-divisions)	-	1000	-
Table-1(capacity at lowest graduation line)	-	1000	-
Cl-9.1(Wall thickness)	-	1000	-
Cl-9.2(Stability)	-	1000	-
Cl-9.3(Base)	-	1000	-
Cl-9.4(Rim and spout)	-	1000	-
Cl-9.5(Neck and stopper)	-	1000	-
Cl-9.6, Table-2(Nominal capacity)	-	1000	-
Cl-9.6, Table-2(Overall height)	-	1000	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	1000	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	1000	-
Cl-9.6, Table-2(Sub divisions)	-	1000	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	1000	-
Cl-10.1(Graduation)	-	1000	-
Cl-10.2(Figuring)	-	1000	-
Cl-11(Accuracy testing)	-	1000	-
Cl-13(Visibility of graduation lines, figures and marking)	-	0	-
Clause. 8.0(Material)	-	1500	-
Table- 1(Max. Permissible Error (Class- a))	-	1000	-
Table- 1(Max. Permissible Error (Class- b))	-	1000	-
Table- 2(Max. Permissible Error (Type-2))	-	1000	-

-
Included w.e.f. 12.11.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number