BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5281

EMC Testing and Compliance LLP, Gurugram

8141526

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	1000	-
Cl 3.2(Material used for composite bottom)	-	1000	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	1000	-
Cl 3.4(Material used for stainless steel lid)	-	1000	-
Cl 3.5(Material used for tempered glass lid)	-	1000	-
Cl 3.5(Material used for stainless steel rim)	-	1000	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	1000	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	1000	-
Cl 4.2(Thickness of the finished utensil)	-	1000	-
Cl 4.3(Classification)	-	1000	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	1000	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	1000	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	1000	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	1000	-
Cl 5.1(Manufacturing defect & visual appearance)	-	1000	-
CL 5.2(Accessibility for cleaning)	-	1000	-
Cl 5.3(Joining of handles to the utensils)	-	1000	-
Cl 5.4(Requirement for handles)	-	1000	-
Cl 5.5(Welding (Finish))	-	1000	-
Cl 5.6(Finish of 3-ply utensil)	-	1000	-
Cl 5.7(Requirement for coating)	-	1000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	2500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	2500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	2500	-
Cl 6.7(Nominal Capacity Test)	-	2500	-
Cl 8(Marking)	-	1000	-
3.1(a) Carbon)	-	1000	-
3.1(b) Silicon)	-	1000	-
3.1(c)Manganese)	-	1000	-
3.1(d) Nickel)	-	1000	-
3.1(Chromium)	-	1000	-
3.1(Sulphu)	-	1000	-
3.1(Phosphorus)	-	1000	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	1000	-
3.1(Nitrogen)	-	1000	-
3.2 a(a) Carbon)	-	1000	-
3.2 a(b) Silicon)	-	1000	-
68995(Manganese)	-	1000	-
3.2 a(d) Nickel)	-	1000	-
3.2 a(Chromium)	-	1000	-
3.2 a(Sulphur)	-	1000	-
3.2 a(g) Phosphorus)	-	1000	-
3.2 a(h) Copper)	-	1000	-
3.2 a(Nitrogen)	-	1000	-
3.2 b(a) Aluminium)	-	1000	-
3.2 b(b) Copper)	-	1000	-
3.2 b(c) Magnesium)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(e) Iron)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(d) Silicon)	-	1000	-
3.2 b(e) Iron)	-	1000	-
3.2 b(f) Manganese)	-	1000	-
3.2 b(g) Zinc)	-	1000	-
3.2 b(h) Titanium)	-	1000	-
3.2 b(i) Chromium)	-	1000	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	1000	-
3.2 b(k) Lead)	-	1000	-
3.2 c(a) Carbon)	-	1000	-
3.2 c(b) Silicon)	-	1000	-
3.2 c(c) Manganese)	-	1000	-
3.2 c(d) Nickel)	-	1000	-
3.2 c(e) Chromium)	-	1000	-
3.2 c(f) Sulphur)	-	1000	-
3.2 c(g) Phosphorus)	-	1000	-
3.3(a) Inner layer)	-	1000	-
3.3(b) Middlelayer)	-	1000	-
3.3(c) Outerlayer)	-	1000	-
3.4(a) Carbon)	-	1000	-
3.4(b) Silicon)	-	1000	-
3.4(c) Manganese)	-	1000	-
3.4(d) Nickel)	-	1000	-
3.4(e) Chromium)	-	1000	-
3.4(f) Sulphur)	-	1000	-
3.4(g) Phosphorus)	-	1000	-
3.4(h) Copper)	-	1000	-
3.4(i) Nitrogen)	-	1000	-
3.4(Thickness stainless steel lid)	-	1000	-
3.5(If the utensils provided with tempered glass lid)	-	1000	-
4.1(Shapes and Dimensions)	-	1000	-
4.2(Thickness of the sheet)	-	1000	-
4.3(Classifications)	-	1000	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	1000	-
4.3(Thickness of protective layer (as per IS 15960))	-	1000	-
4.4(Thickness of 3ply full body utensil)	-	1000	-
5(Workmanship and finish)	-	1000	-
5.4(Handles)	-	1000	-
4.1 of IS 13395(Construction)	-	1000	-
4.2 of IS 13395(Materials)	-	1000	-
4.3 of IS 13395(Selection and Size)	-	1000	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	1000	-
4.5 of IS 13395(Attachment to Cookware)	-	1000	-
5.2 of IS 13395(Bending Strength)	-	1000	-
5.3 of IS 13395(Torque Strength)	-	1000	-
5.4 of IS 13395(Impact Strength)	-	1000	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	1000	-
5.6 of IS 13395(Leakage)	-	1500	-
5.7 of IS 13395(Thermal Insulation)	-	1500	-
5.8 of IS 13395(Heat Resistance)	-	2000	-
5.9 of IS 13395(Washing Resistance)	-	1000	-
5.10 of IS 13395(Burning Resistance)	-	1000	-
5.5(Material comes in contact with food)	-	2000	-
6.1(Staining Test)	-	2000	-
6.2(Mechanical Shock Test)	-	2000	-
6.3(Thermal Shock Test)	-	2000	-
6.4(Dry Heat Test)	-	2000	-
6.6(Heat test)	-	2000	-
6.7.1(Nominal Capacity Test)	-	2000	-
6.7.2(Internal diameter of utensil)	-	2000	-
Cl 5.8(Coating thickness test)	-	2000	-
Cl 5.8(Coating adhesion test)	-	2000	-
Cl 5.8.1(Thermal shock test (Coating))	-	2000	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	2000	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	2000	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	2000	-

19 Jul, 2027

-
Included w.e.f 30.01.2026

5282

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

9050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
11(Marking)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
12(Packing)	-	5050	For dimensional and other qualitative test
13(Accessories)	-	5050	For dimensional and other qualitative test
13(Accessories)	-	5050	For dimensional and other qualitative test
6(Nominal Sizes)	-	5050	For dimensional and other qualitative test
6(Nominal Sizes)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
8(Essential Requirements)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
9(Finish)	-	5050	For dimensional and other qualitative test
10Annex B(Test)	-	5050	For dimensional and other qualitative test
B-1.2(a) Visual Inspection)	-	5050	For dimensional and other qualitative test
B-1.3(b) Surface)	-	5050	For dimensional and other qualitative test
B-1.3(b) Surface)	-	5050	For dimensional and other qualitative test
B-1.4(c) Performance Requirements)	-	5050	For dimensional and other qualitative test
B-1.4(c) Performance Requirements)	-	5050	For dimensional and other qualitative test
B-1.4(c) Performance Requirements)	-	5050	For dimensional and other qualitative test
B-1.4(c) Performance Requirements)	-	5050	For dimensional and other qualitative test
B-1.5(d) Endurance Test)	-	4000	For endurance test
B-1.5(d) Endurance Test)	-	4000	For endurance test
B-1.5(d) Endurance Test)	-	4000	For endurance test
B-1.5(d) Endurance Test)	-	4000	For endurance test
B-1.5(d) Endurance Test)	-	4000	For endurance test
B-1.5(d) Endurance Test)	-	4000	For endurance test
Cl. 7 Table 2(Materials)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xvii)(Material for Top lid)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xvi)(Material for Pawl)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xv)(Material for Top nut)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xiv)(Material for Main arm bolt)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland )	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft )	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) )	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - x)(Material for Clamp)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - ix)(Material for Main arm )	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - viii)(Material for Adjusting arm)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - vi)(Material for Control valve screw)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - v)(Material for Material for Packing/washers)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - iii)(Material for Nuts)	-	5050	For dimensional and other qualitative tests
Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring)	-	5050	For dimensional and other qualitative tests

-
Included w.e.f.09.07.2025

5283

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

Bars, Billets, Blooms, and slabs of all size

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	5000	-
Cl 8(Diameter, Ovality & Weight)	-	5000	-
Cl 9(UTM & HBW)	-	5000	-
Cl 7(Workmanship)	-	5000	-
Cl 8(Diameter, Ovality & Weight)	-	5000	-
Cl 9(UTM & HBW)	-	5000	-
Cl 7(Workmanship)	-	5000	-
Cl 8(Diameter, Ovality & Weight)	-	5000	-
Cl 9(UTM & HBW)	-	5000	-
6.1, 6.2(cr + n + mo)	-	4000	-
6.1, 6.2(tin)	-	4000	-
6.1, 6.2(boron)	-	4000	-
6.1, 6.2(vanadium)	-	4000	-
6.1, 6.2(molybdenum)	-	4000	-
6.1, 6.2(copper)	-	4000	-
6.1, 6.2(cromium)	-	4000	-
6.1, 6.2(nickel)	-	4000	-
6.1, 6.2(aluminium)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6.1, 6.2(phosphorus)	-	4000	-
6.1, 6.2(sulphur)	-	4000	-
6.1, 6.2(manganese)	-	4000	-
6.1, 6.2(silicon )	-	4000	-
6.1, 6.2(carbon)	-	4000	-
6, table 1(Chemical Composition)	-	4000	-
7(Freedom from defects)	-	5000	-
8(Dimensional Properties (Diameter))	-	5000	-
8(Dimensional Properties (Ovality))	-	5000	-
8(Dimensional Properties (Weight per Meter, kg))	-	5000	-
9.1, table 2(Tensile Strength)	-	5000	-
9.1, table 2(Yield Strength)	-	5000	-
9.1, table 2(Elongation)	-	5000	-
9.2, table 2(hardness test)	-	5000	-
12.2(Bend Test)	-	5000	-
12.3(grain size)	-	5000	-
12.4(Macrostructure)	-	5000	-
12.7(Blue Fracture Test)	-	5000	-
Cl 9(UTM & HBW)	-	5000	-
Cl 8(Diameter, Ovality & Weight)	-	5000	-
Cl 7(Workmanship)	-	5000	-
Cl 7(Workmanship)	-	5000	-
Cl 8(Diameter, Ovality & Weight)	-	5000	-
Cl 9(UTM & HBW)	-	5000	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	5000	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	5000	-
9.1(Tensile Strength - IS: 1608(P1))	-	5000	-
9.1(Yield Strength-IS:1608(P1))	-	5000	-
9.1(Elongation on SoA 5.65mm GL)	-	5000	-
9.2(Hardness-HB IS:1500 (P1))	-	5000	-
12.0 & 12.2(Bend Test - IS 1599)	-	5000	-
12.0 & 12.3(Grain Size - IS 4748)	-	5000	-
12.0 & 12.4(Macrostructure- IS 11371)	-	5000	-
7(Freedom from defects)	-	5000	-
12.7(Blue fracture test (IS:1875-1985))	-	5000	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	4000	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	4000	-
Cl-8(Diameter.)	-	5000	-
Cl-8(Ovality)	-	5000	-
Cl 7(Workmanship)	-	0	-
Cl 8(Diameter, Ovality & Weight)	-	0	-
Cl 9(UTM & HBW)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Diameter, Ovality & Weight)	-	0	-
Cl 9(UTM & HBW)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Diameter, Ovality & Weight)	-	0	-
Cl 9(UTM & HBW)	-	0	-
6, table 1(Chemical Composition)	-	0	-
7(Freedom from defects)	-	0	-
8(Dimensional Properties (Diameter))	-	0	-
8(Dimensional Properties (Ovality))	-	0	-
8(Dimensional Properties (Weight per Meter, kg))	-	0	-
9.1, table 2(Tensile Strength)	-	0	-
9.1, table 2(Yield Strength)	-	0	-
9.1, table 2(Elongation)	-	0	-
9.2, table 2(hardness test)	-	0	-
12.2(Bend Test)	-	0	-
12.3(grain size)	-	0	-
12.4(Macrostructure)	-	0	-
12.7(Blue Fracture Test)	-	0	-
Cl 9(UTM & HBW)	-	0	-
Cl 8(Diameter, Ovality & Weight)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Diameter, Ovality & Weight)	-	0	-
Cl 9(UTM & HBW)	-	0	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	0	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	0	-
9.1(Tensile Strength - IS: 1608(P1))	-	0	-
9.1(Yield Strength-IS:1608(P1))	-	0	-
9.1(Elongation on SoA 5.65mm GL)	-	0	-
9.2(Hardness-HB IS:1500 (P1))	-	0	-
12.0 & 12.2(Bend Test - IS 1599)	-	0	-
12.0 & 12.3(Grain Size - IS 4748)	-	0	-
12.0 & 12.4(Macrostructure- IS 11371)	-	0	-
7(Freedom from defects)	-	0	-
12.7(Blue fracture test (IS:1875-1985))	-	0	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	0	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	0	-
Cl-8(Diameter.)	-	0	-
Cl-8(Ovality)	-	0	-
Cl 12(Supplementary Requirements)	-	0	-
Cl 12(Supplementary Requirements)	-	0	-
Cl 12(Supplementary Requirements)	-	0	-
Cl 12(Supplementary Requirements)	-	0	-
Cl 12(Supplementary Requirements)	-	0	-

-
Included w.e.f.18.08.2025 Exclusion Cl "12.5 (Ultrasonic Test)12.6 (Magnetic Particle Test) Cl 12.0 & 12.5 (Ultrasnoic Test) Cl 12.0 & 12.6 (Magnetic Particle Test - IS 10138 (P3))

5284

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 13450 : Part 2 : Sec 27 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 27 electrocardiographic monitoring equipment

1212000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	30000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	30000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	12000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	15000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	50000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	30000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	30000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	40000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	40000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	40000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	35000	-
201.16(Me Systems)	-	20000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	370000	-
202(Electromagnetic compatibility – Requirements and tests)	-	170000	-
202.6(ELECTROMAGNETIC COMPATIBILITY)	-	150000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	100000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(Me Systems)	-	0	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	0	-
202(Electromagnetic compatibility – Requirements and tests)	-	0	-
202.6(ELECTROMAGNETIC COMPATIBILITY)	-	0	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	0	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

5285

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification - IS 444)	-	2500	For dimensional and other qualitative test
5(Lining - IS 444)	-	2500	For dimensional and other qualitative test
5(Reinforcement - IS 444)	-	2500	For dimensional and other qualitative test
5(Cover - IS 444)	-	2499.98	For dimensional and other qualitative test
5(Lining and Cover - IS 444)	-	2499.99	For dimensional and other qualitative test
6.1- Table 1(Internal diameters - ISO 4671)	-	2500	For dimensional and other qualitative test
6.2(Concentricity - ISO 4671)	-	2499.99	For dimensional and other qualitative test
6.3(Length -IS 4671)	-	2500	For dimensional and other qualitative test
6.4( thickness of the lining plus cover - ISO 4671)	-	2500	For dimensional and other qualitative test
6.4(If the cover is fluted, the depth of the flutes - ISO 4671)	-	2500	For dimensional and other qualitative test
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	7500	For mechanical test
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	7499.98	For mechanical test
7.1 - Table 2(elongation at break of Lining - ISO 37)	-	7500	For mechanical test
7.1 - Table 2(elongation at break of Cover - ISO 37)	-	7500	For mechanical test
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	7500	For mechanical test
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	7500	For mechanical test
7.1 - Table 2(Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-	7500	For mechanical test
7.1 - Table 2(Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-	7500	For mechanical test
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	2500.02	For hydrostatic test
7.2 - Table 3(Change in length at proof pressure - ISO 1402)	-	2499.99	For hydrostatic test
7.2 - Table 3(Minimum burst pressure - ISO 1402)	-	2500.02	For hydrostatic test
7.2 - Table 3(Adhesion between components - ISO 8033)	-	2500	For dimensional and other qualitative test
7.2 - Table 3(Ozone resistance - ISO 7326)	-	3000	For ozone resistance test
7.2 - Table 3(Flexibility at 23 °C - Method A of ISO 1746)	-	2000	For flexibility test
7.2 - Table 3(Low-temperature flexibility - Method B of ISO 4672)	-	2000.02	For flexibility test

-
Included w.e.f.07.07.2025

5286

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0( NOMINAL SIZES )	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
7.0(NOMINAL PRESSURES)	-	5000	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For complete hydrostatic test
9.1.1 ( Double Flanged Body Ends)	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
9.2.2(Wafer Body Ends)	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
11.0(Bodies)	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
12.0(DISC AND SHAFT)	-	2500	(7500 for size: 50 mm to 300 mm), (15000 for size 350 to 600 mm), (30,000 for size 700 to 900 mm), (60,000 for size 1000 mm to 1400 mm) For dimensional and qualitative Tests
14.0(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.2(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.3(BEARINGS)	-	2500	For dimensional and qualitative Tests
17.2(Body Test)	-	5000	For complete Hydrostatic Tests
17.4(Disc Strength Test)	-	5000	For complete Hydrostatic Tests
17.3(Seat Test)	-	5000	For complete Hydrostatic Tests
Cl. 15 Table 2(Materials)	-	7500	For each component (CI, Stainless Steel) - If required
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	2000	--
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	2000	-

-
-

5287

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

All sizes and All Grades

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nominal Sizes )	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
9.5-Table 13(Seat Test ( Hydrostatic))	-	1500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For Complete Cl 9
5(Types)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
4(Classification )	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1(Valve Bodie - IS 778)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.1(Body End Ports -IS 778)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.2(Water-Way Area - IS 778)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.3(Screwed Body End -IS 778)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.3.1(Screwed Body End -IS 778)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.3.1(Threads - IS 554)	-	3500	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) (For complete dimensional testing)
7.1.3.1-Table2(length of threaded portion in screwed end valves - IS 778)	-	3500	(For complete dimensional testing)
7.1.3.1(Thread -IS 778)	-	3500	(For complete dimensional testing)
7.1.3.1(Screwed Body End -IS 778)	-	3500	(For complete dimensional testing)
7.1.4(Flanged Body End IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1- Table 3(Diameter of flange - IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1- Table 3(Thickness of flange - IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1- Table 3(Diameter of Belt circle -IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1- Table 3(No. of holes - IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1- Table 3(Diameter of holes -IS 778)	-	3500	(For complete dimensional testing)
7.1.4.1(Holes in flange - IS 778)	-	3500	(For complete dimensional testing)
7.1.5(Wedge and Disc Guides in the Bodies of Gate Valves - IS 778)	-	3500	(For complete dimensional testing)
7.2.1(Bonnets - IS 778)	-	3500	(For complete dimensional testing)
7.2.1.1(Bonnets - IS 778)	-	3500	(For complete dimensional testing)
7.2.1.2(number of engaged threads - IS 778)	-	3500	(For complete dimensional testing)
7.2.1.2(pitch of threads - IS 778)	-	3500	(For complete dimensional testing)
7.2.1.3(Bonnets - IS 778)	-	3500	(For complete dimensional testing)
7.2.2(Bonnet Flanges - IS 778)	-	3500	(For complete dimensional testing)
7.2.3(Bonnet Bolting - IS 778)	-	3500	(For complete dimensional testing)
7.3(Stuffing Box - IS 778)	-	3500	(For complete dimensional testing)
7.4(Gland - IS 778)	-	3500	(For complete dimensional testing)
7.4.1(Gland nut - IS 778)	-	3500	(For complete dimensional testing)
7.5(Back Seat- IS 778)	-	3500	(For complete dimensional testing)
7.6.1(Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.2(Threads of Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.3(actuating threads - IS 778)	-	3500	(For complete dimensional testing)
7.6.4(Length of Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.5(Upper end of Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.6(Rising Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.6.1(Rising Stem - IS 778)	-	3500	(For complete dimensional testing)
7.6.7(Non-rising Stem - IS 778)	-	3500	(For complete dimensional testing)
7.7.1(Wedge-IS 778)	-	3500	(For complete dimensional testing)
7.7.2(Wedge-IS 778)	-	3500	(For complete dimensional testing)
7.7.3(Double disc - IS 778)	-	3500	(For complete dimensional testing)
7.7.3.1(Spreading assembly - IS 778)	-	3500	(For complete dimensional testing)
7.7.3.2(Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8(Disc Assembly for Globe Valves - IS 778)	-	3500	(For complete dimensional testing)
7.8.1(One-Piece Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8.1(One-Piece Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8.1(One-Piece Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8.1(One-Piece Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8.1(One-Piece Disc - IS 778)	-	3500	(For complete dimensional testing)
7.8.2(Renewable Disc Assembly - IS 778)	-	3500	(For complete dimensional testing)
7.9(Disc for Check Valves - IS 778)	-	3500	(For complete dimensional testing)
7.9(Disc for Check Valves - IS 778)	-	3500	(For complete dimensional testing)
7.9.1(Disc of glove and Check Valves - IS 778)	-	3500	(For complete dimensional testing)
7.10.1(Body Seats - IS 778)	-	3500	(For complete dimensional testing)
7.10.1(Seat ring - IS 778)	-	3500	(For complete dimensional testing)
7.11(Handwheel - IS 778)	-	3500	(For complete dimensional testing)
7.11(Handwheel - IS 778)	-	3500	(For complete dimensional testing)
8.1- Table 4(Thickness of Body and Bonnet- IS 778)	-	3500	(For complete dimensional testing)
8.2 - Table 5(Flat to Flat size -IS 778 )	-	3500	(For complete dimensional testing)
8.3 - Table 6(Width of end - IS 778)	-	3500	(For complete dimensional testing)
8.4 - Table 7(Stem Diameters - IS 778)	-	3500	(For complete dimensional testing)
8.5 - Table 8(Size of packing space - IS 778)	-	3500	(For complete dimensional testing)
8.6- Table 9 to Table 12(End to end/ centre to ends/ Face to face/Centre to face dimension )	-	3500	(For complete dimensional testing)
9.3-Table 13(Body Test ( Hydrostatic))	-	1500	For Complete Cl 9
9.4(Back Seat Test )	-	1500	For Complete Cl 9
6- Table 1-i)(Brass(Body)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-i)(Leaded tin Bronze(Body)-Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-ii)(Leaded tin Bronze(Bonnet or cover)-Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-ii)(Forged Brass(Bonnet or cover)-Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-ii)(Brass(Bonnet or cover)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze(Stuffing box) - Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (disc hinge)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze( check nut)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (stem nut)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (disc retaining nut)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (gland)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (gland nut) - Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze ( gland flange)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze ( gland flange)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (body seat rings)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze (body seat rings)- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze ( disc or wedge facing rings )- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Leaded tin bronze ( disc or wedge facing rings )- Cl 3 and table 1 of IS 318)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rod (Stuffing box) - Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rod (Stuffing box) - Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode(disc hinge)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)( Extruded brass rode (check nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)( Extruded brass rode (check nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (stem nut) - Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (disc retaining nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (disc retaining nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (gland )- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (gland )- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (gland nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (gland nut)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode ( gland flange)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode ( gland flange)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (body seat rings)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode (body seat rings)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode( disc or wedge facing rings)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Extruded brass rode( disc or wedge facing rings)- Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (Stuffing box)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (Stuffing box)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass(disc hinge)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass(disc hinge)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass ( check nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass ( check nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (stem nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (disc retaining nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (disc retaining nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland nut)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland flange)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (gland flange)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (body seat rings)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (body seat rings)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (disc or wedge facing rings)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Forged brass (disc or wedge facing rings)- Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(Stuffing box)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(Stuffing box)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass (disc hinge)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass (disc hinge)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass( check nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass( check nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(stem nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(stem nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(disc retaining nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(disc retaining nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(gland)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(gland)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(gland nut)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(gland flange)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(gland flange)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(body seat rings)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass(body seat rings)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass( disc or wedge facing rings)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iii)(Brass( disc or wedge facing rings)-Cl 7 and table 1 of IS 1264)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Extruded brass rod (stem)-Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Forged brass ( stem) -Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Forged brass ( stem) -Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Extruded brass rod (hinge pin)-Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass ( hinge pin) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass ( hinge pin) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Extruded brass rod (plug)-Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Extruded brass rod (plug)-Cl 8.1 and table 1 of IS 319)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass( plug) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(High-tensile brass( plug) - Cl 4.1 and table 1 of IS 320)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Forged brass ( plug) -Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-iv)(Forged brass ( plug) -Cl 8 , table 3 and FLB of IS 6912)	-	2000	For complete chemical test, if required
6- Table 1-v)(Chromium steel (Ball for ball type check valves) - Cl 5.1 and table 1 of IS 4398)	-	2000	For complete chemical test, if required
6- Table 1-vi)(Mild steel (Bolts, nuts) - IS 1367)	-	2000	For complete chemical test, if required
6- Table 1-vi)(Mild steel (Bolts, nuts) - IS 1367)	-	2000	For complete chemical test, if required
6- Table 1-vii)(Cast iron (Handwheel ) - Cl 6.1 of IS 210)	-	2000	For complete chemical test, if required
6- Table 1-vii)(Cast iron (Handwheel ) - Cl 6.1 of IS 210)	-	2000	For complete chemical test, if required
6- Table 1-viii)(Compressed asbestos fibre (Gasket) - Cl 8.9 , Annex G of IS 2712)	-	2000	For complete chemical test, if required
6- Table 1-viii)(Compressed asbestos fibre (Gasket) - Cl 8.9 , Annex G of IS 2712)	-	2000	For complete chemical test, if required
6- Table 1-ix)(Hemp and jute (Gland packing) - IS 5414)	-	2000	For complete chemical test, if required
6- Table 1-ix)(Hemp and jute (Gland packing) - IS 5414)	-	2000	For complete chemical test, if required
6- Table 1-ix)(Asbestos (Gland packing)-IS 4687)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required
6- Table 1-ix)(Asbestos (Gland packing)-IS 4687)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required
6- Table 1-x)(Phosphor bronze wire (Spring) - As per Cl 6.1, Table 1 of IS 7608)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required
6- Table 1-x)(Phosphor bronze wire (Spring) - As per Cl 6.1, Table 1 of IS 7608)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required
6- Table 1-xi)(Synthetic rubber ( Seating ring) -IS 5192)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required
6- Table 1-xi)(Synthetic rubber ( Seating ring) -IS 5192)	-	2000	(7000 for sizes upto and including 32 mm), (14000 for sizes 40 mm to upto and including 100 mm) For complete chemical test, if required

-
-

5288

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

MR/BWP

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	500	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	500	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	-
9.2.3(Adhesion of Plies - Annexure H)	-	500	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	0	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	0	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	1000	-
cl. 11(marking)	-	0	-
cl. 11.1(marking - BIS certification marking)	-	0	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
6.2(Core- Moisture & Width)	-	500	-
6.3(Cross Bands and Faces- Moisture content)	-	500	-
6.3.1(Thickness of cross band and face veneers)	-	500	-
Cl-7.1(Thickness)	-	0	-
Cl-7.2(Sizes)	-	0	-
9.2.6(Spot test - Annexure L)	-	-	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	-	-
cl. 11(marking)	-	-	-
cl. 11.1(marking - BIS certification marking)	-	-	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	-	-
6.2(Core- Moisture & Width)	-	-	-
6.3(Cross Bands and Faces- Moisture content)	-	-	-
6.3.1(Thickness of cross band and face veneers)	-	-	-
Cl-7.1(Thickness)	-	-	-
Cl-7.2(Sizes)	-	-	-

27 May, 2028

-
Included w.e.f.07.07.2025

5289

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 14407 (2023)

Aluminium cans for beverages -- Specification (first revision)

ALL

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	35400	-
5(Material)	-	35400	-
5.1-1A&B-1(Copper)	-	35400	-
5.1-1A&B-2(Magnesium)	-	35400	-
5.1-1A&B-3(Silicon)	-	35400	-
5.1-1A&B-4(Iron)	-	35400	-
5.1-1A&B-5(Manganese)	-	35400	-
5.1-1A&B-6(Zinc)	-	35400	-
5.1-1A&B-7(Titanium)	-	35400	-
5.1-1A&B-8(Chromium)	-	35400	-
5.1-1A&B-9(Gallium)	-	35400	-
5.1-1A&B-10(Vanadium)	-	35400	-
5.1-1A&B-11(Other total)	-	35400	-
5.1-1A&B-12(Aluminium)	-	35400	-
5.2 -6 Annex B-2.2(Determination of HX8 Minimum Tensile Strength)	-	35400	-
5.3-2A&B(Temper)	-	35400	-
5.3-2A&B(Specified Thickness)	-	35400	-
5.3-2A&B(Tensile Strength)	-	35400	-
5.3-2A&B(0.2 % Proof Stress)	-	35400	-
5.3-2A&B(Elongation)	-	35400	-
5.3-2A&B(Bend Test)	-	35400	-
6.1.1(Manufacture - Can Body)	-	35400	-
6.1.2(Manufacture - Can Ends)	-	35400	-
6.2(Internal Finish)	-	35400	-
6.3(External Coating)	-	35400	-
6.3.1(Bottom Rim Coating)	-	35400	-
6.3.2(Pasteurisation and Retort Coating)	-	35400	-
6.4(Shape and Dimensions)	-	35400	-
6.4.1 - 3(Shape and Dimensions)	-	35400	-
6.4.1 - 3(Nominal Capacity)	-	35400	-
6.4.1 - 3(Can Type)	-	35400	-
6.4.1 - 3(Finished Can Height)	-	35400	-
6.4.1 - 3(Inside Neck/Plug Diameter)	-	35400	-
6.4.1 - 3(Outside Can Diameter)	-	35400	-
6.4.1 - 3(Free Board)	-	35400	-
6.4.1 - 3(Neck Seaming Clearance)	-	35400	-
6.4.1 - 3(Brimful Capacity)	-	35400	-
6.4.2-4(Can End Size)	-	35400	-
6.4.2-4(Can End Type)	-	35400	-
6.4.2-4(Outside Curl Diameter)	-	35400	-
6.4.2-4(Punch Plug Diameter)	-	35400	-
6.4.2-4(Curl Height)	-	35400	-
6.4.2-4(Inside Curl Diameter)	-	35400	-
6.4.2-4(Countersink Depth)	-	35400	-
6.4.2-4(Panel Height)	-	35400	-
7.1.1(Top Load /Axial Load /Column Strength)	-	35400	-
7.1.2(Enamel Rater Criteria)	-	35400	-
7.1.3(Buckle Strength/Dome Reversal)	-	35400	-
7.1.4(Air Pressure Test)	-	35400	-
7.1.5(Slip Angle Test/Wall Mobility Test)	-	35400	-
7.2(Testing of Ends)	-	35400	-
7.3.1(Overall Migration Limit)	-	35400	-
7.3.2(Specific Migration Limit)	-	35400	-
7.3.2 - 5 - 1(Barium)	-	35400	-
7.3.2 - 5 - 2(Cobalt)	-	35400	-
7.3.2 - 5 - 3(Copper)	-	35400	-
7.3.2 - 5 - 4(Iron)	-	35400	-
7.3.2 - 5 - 5(Lithium)	-	35400	-
7.3.2 - 5 - 6(Manganese)	-	35400	-
7.3.2 - 5 - 7(Zinc)	-	35400	-
7.3.2 - 5 - 8(Antimony)	-	35400	-
7.3.2 - 5 - 9("Phthalic acid, bis (2-ethylhexyl)ester (DEHP)")	-	35400	-
9(Marking)	-	35400	-
7.2(Capacity)	-	35400	-
7.3(Impact Resistance test)	-	35400	-

08 May, 2028

-
Included w.e.f.10.07.2025

5290

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5082 (1998)

Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(CHEMICAL COMPOSITION Table 1)	-	5500	For complete chemical testing
Clause 5(FREEDOM FROM DEFECTS)	-	2500	For dimension and other qualitative test
8.1(MECHANICAL TEST Tensile Strength Min, Mpa)	-	6999.99	For mechanical test
8.1(MECHANICAL TEST (0.2 Percent Proof Stress Min, Mpa))	-	7000	For mechanical test
8.1(Percent Elongation on 5.65 Min)	-	7000.03	For mechanical test
8.1(Electrical Conductivity at 20°C,Min)	-	2500	For dimension and other qualitative test
8.1(Maximum Electrical Resistivity at 20°C ohm-mm/mm2)	-	2499.99	For dimension and other qualitative test
8.2(Bend Test)	-	2500	For dimension and other qualitative test
Clause 10(DIMENSIONAL TOLERANCES)	-	2499.98	For dimension and other qualitative test
6.1, Table 1(Aluminium)	-	5500	For complete chemical testing
6.1, Table 1(Copper)	-	5500	For complete chemical testing
6.1, Table 1(Magnesium)	-	5500	For complete chemical testing
6.1, Table 1(Silicon)	-	5500	For complete chemical testing
6.1, Table 1(Manganese)	-	5500	For complete chemical testing
6.1, Table 1(Zinc)	-	5500	For complete chemical testing
6.1, Table 1(Titanium)	-	5500	For complete chemical testing
6.1, Table 1(Chromium)	-	5500	For complete chemical testing
6.1, Table 1(Iron)	-	5500	For complete chemical testing
6.1, Table 1(Vanadium)	-	5500	For complete chemical testing

-
Included w.e.f.07.07.2025

5291

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

Type I/Type II/Type III/Type IV

17544.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	1150	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	694	-
5.1.6(Ash content - IS 2508: 2024)	-	900	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	525	-
5.1.1(Appearance)	-	375	-
5.1.2(Film Form)	-	375	-
5.1.3(Odour)	-	375	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	825	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	375	-
5.2.1.2(Nominal Width)	-	375	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1475	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	975	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	975	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	975	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	4200	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	825	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1325	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	825	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	0	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	0	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	0	-
5.1.6(Ash content - IS 2508: 2024)	-	0	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	0	-
5.1.1(Appearance)	-	0	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	0	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	0	-
5.2.1.2(Nominal Width)	-	0	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	0	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	0	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	0	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	0	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	0	-
5.1.6(Ash content - IS 2508: 2024)	-	0	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	0	-
5.1.1(Appearance)	-	0	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	0	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	0	-
5.2.1.2(Nominal Width)	-	0	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	0	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	0	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	0	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	0	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	0	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	0	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	0	-

31 Dec, 2026

-
Included w.e.f.09.07.2025

5292

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

ALL

23500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1(Te)	-	23500	-
5.1 Table-1(Se)	-	23500	-
5.1 Table-1(Bi)	-	23500	-
5.1 Table-1(Se+Te+Bi)	-	23500	-
5.1 Table-1(Sb)	-	23500	-
5.1 Table-1(As)	-	23500	-
5.1 Table-1(Sn)	-	23500	-
5.1 Table-1(Pb)	-	23500	-
5.1 Table-1(Fe)	-	23500	-
5.1 Table-1(Ni)	-	23500	-
5.1 Table-1(S)	-	23500	-
5.1 Table-1(Ag)	-	23500	-
5.1 Table-1(O)	-	23500	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	23500	-
6.1(Dimension)	-	23500	-
6.2.2(Ovality)	-	23500	-
7.0(Freedom from Defects)	-	23500	-
8.1(Tensile Strength)	-	23500	-
8.2(Surface Compression Test)	-	23500	-
Cl-9.1, Table-4(Volume Resistivity)	-	23500	-
Cl-9.1, Table-4(Mass Resistivity)	-	23500	-
Cl-9.1, Table-4(Electrical Conductivity)	-	23500	-
7.2(Surface Oxide)	-	23500	-
10.5(Microscopic Examination)	-	23500	-
9.2.1.1(Electrical Properties)	-	23500	-
9.2.1.2(Electrical Properties)	-	23500	-
9.2.1.3(Electrical Properties)	-	23500	-
13(Mechanical Strength)	-	23500	-
8.2.2(Calculated resistance)	-	23500	-
Cl-9.2.2(Electrical Properties)	-	23500	-

08 May, 2028

-
Included w.e.f.22.07.2025

5293

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

All Grade / Type / Size / Designation

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Workmanship & Finish)	-	1000	-
Cl.6.2(Ultimate Tensile Strength- IS 2657)	-	2500	-
Cl.6.2(0.2 percent proof strength- IS 2657)	-	2500	-
Cl.6.2(Elongation on 50 mm gauge length- IS 2657)	-	2500	-
Cl. 6.3(Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-	1000	-
Cl. 6.4(Hydrostatic Pressure Test-Cl. 6.4)	-	1000	-
Cl.7.1, Table 2(Outside Diameter-)	-	1000	-
Cl.7.1, Table 2(Roundness or Ovality)	-	1000	-
Cl.7.1, Table 2(Wall Thickness)	-	1000	-
Cl. 7.2(Length)	-	1000	-
Cl. 6.1(Copper- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Magnesium- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Silicon- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Iron- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Manganese- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Zinc- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Chromium- IS 504 or any other established instrumental/ chemical method)	-	1000	-
Cl. 6.1(Titanium and/ other grain refining elements)	-	1000	-
Cl. 6.1(Aluminium- IS 504 or any other established instrumental/ chemical method)	-	1000	-
9.1(Marking)	-	1000	-
14(Workmanship & Finish)	-	1000	-
7.1(Dimensions)	-	1000	-
6.2(Mechanical properties)	-	2500	-
6.3(Drift Expanding Test)	-	1000	-
6.4(Drift Expanding Testt)	-	1000	-
5.3.2(hydrostatic pressure test)	-	1000	-
6.3(Drift expanding test)	-	1000	-
7.1 table 2(Dimensions and tolerances for extruded tubes)	-	1000	-
6.1(chemical composition)	-	10000	-
6.2(ultimate tensile strength)	-	2500	-
6.2(0.2% proof strength)	-	2500	-
6.2(Elongation on 50 mm gauge length)	-	2500	-

-
Included w.e.f.28.07.2025

5294

Interfield Laboratories, Kochi

6124716

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

26875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	344	-
Cl-5.2.2(Coliform)	-	344	-
Cl-5.2.3(Staphylococcus aureus)	-	312.5	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	375	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	312.5	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	437	-
Cl-5.2.7(Yeast and mould)	-	312.5	-
Cl-5.2.8(Salmonella)	-	625	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	94	-
Cl-5.3, Table-1 (ii)(Odour)	-	93.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	93.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	125	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	125	-
Cl-5.3, Table-1 (vi)(pH)	-	125	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	125	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	375	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	375	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	187.5	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	187.5	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	187.5	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	125	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	375	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	375	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	187.5	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	125	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	375	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	187.5	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	125	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	125	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	125	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	250	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	125	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	187.5	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1250	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	187.5	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	187.5	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	375	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2250	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	375	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	375	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	375	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	344	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	375	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	375	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	375	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	2500	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	2500	-
Cl-5.3, Table-3 (x)(Uranium)	-	1865	-
Cl-5.4 (ii)(Total pesticide residue)	-	3125	-
Cl-5.2.3(Faecal streptococci)	-	312.5	-
Cl-5.2.8(shigella)	-	562.5	-
Cl-5.2.9(V.parahaemolyticus)	-	562.5	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	437	-
5.4 i)(Dieldrin)	-	104	-
5.4 i)(Aldrin)	-	104	-
5.4 i)(Malathion)	-	104	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	104	-
5.4 i)(Methyl Paraoxon)	-	104	-
5.4 i)(Methyl Parathion)	-	104	-
5.4 i)(Atrazine)	-	104	-
5.4 i)(Alachlor)	-	104	-
5.4 i)(Isoproturon)	-	104	-
5.4 i)(Butachlor)	-	104	-
5.4 i)(2,4-D)	-	109	-
5.4 i)(Phorate sulphone)	-	104	-
5.4 i)(Phorate sulphoxide)	-	104	-
5.4 i)(Phorate)	-	104	-
5.4 i)(Chlorpyrifos)	-	104	-
5.4 i)(Ethion)	-	104	-
5.4 i)(Monocrotophos)	-	104	-
5.4 i)(Endosulfan Sulphate)	-	104	-
5.4 i)(beta-Endosulfan)	-	104	-
5.4 i)(alpha-Endosulfan)	-	104	-
5.4 i)(Delta-HCH)	-	104	-
5.4 i)(beta-HCH)	-	104	-
5.4 i)(alpha-HCH)	-	104	-
5.4 i)(Gamma-HCH (Lindane))	-	104	-
5.4 i)(p,p DDD)	-	104	-
5.4 i)(o,p DDD)	-	104	-
5.4 i)(p,p DDE)	-	104	-
5.4, i)(o,p DDE)	-	104	-
5.4 i)(p,p DDT)	-	104	-
5.4 i)(o,p DDT)	-	104	-
5.3(Appearance)	-	50	-
5.3/Table 2/xiii(Suphate)	-	187.5	-
5.4/Annex D/i(P,P-DDT)	-	104	-
5.4/Annex D/ii(Lindane)	-	104	-
5.4/Annex D/iv(b-Endosulfan)	-	104	-
5.4/Annex D/xvi(Dieldrin)	-	104	-
5.4/Annex D/xvi(Aldrin)	-	104	-
5.4/Annex D/i(O,P-DDT)	-	104	-
5.4/Annex D/iv(a-Endosulfan)	-	104	-
5.4/Annex D/iii(d-HCH)	-	104	-
5.4/Annex D/i(O,P-DDD)	-	104	-
5.4/Annex D/i(P,P-DDE)	-	104	-
5.4/Annex D/i(O,P-DDE)	-	104	-
5.4/Annex D/iii(a-HCH)	-	104	-
5.4/Annex D/iii(β- HCH)	-	104	-
5.4/Annex D/iv(Endosulfan sulfate)	-	104	-
5.4/Annex D/i(P,P-DDD)	-	104	-
5.4/Annex D/xii(Alachlor)	-	104	-
5.4/Annex D/vii(Chlorpyrifos)	-	104	-
5.4/Annex D/x(Butachlor)	-	104	-
5.4/Annex D/vi(Ethion)	-	104	-
5.4/Annex D/xiv(Methyl parathion)	-	104	-
5.4/Annex D/xv(Malathion)	-	104	-
5.4/Annex D/viii(Phorate)	-	104	-
5.4/Annex D/v(Monochrotophos)	-	104	-
5.4/Annex D/xiii(Atrazine)	-	104	-
5.4/Annex D/viii(Phorate sulphoxide)	-	104	-
5.4/Annex D/viii(Phorate sulfone)	-	104	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	104	-
5.4/Annex D/xxviii(Malaoxon)	-	104	-
5.4/Annex D/xi(Isoproturon)	-	104	-
5.4/Annex D/ix(2,4 –D)	-	109	-
Cl-5.1(General Requirements)	-	500	-
Table 3, x)(Uranium)	-	1865	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	3125	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	344	-
Cl-5.2.2(Coliform)	-	344	-
Cl-5.2.3(Staphylococcus aureus)	-	312.5	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	375	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	312.5	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	437	-
Cl-5.2.7(Yeast and mould)	-	312.5	-
Cl-5.2.8(Salmonella)	-	625	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	94	-
Cl-5.3, Table-1 (ii)(Odour)	-	93.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	93.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	125	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	125	-
Cl-5.3, Table-1 (vi)(pH)	-	125	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	125	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	375	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	375	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	187.5	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	187.5	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	187.5	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	125	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	375	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	375	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	187.5	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	125	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	375	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	187.5	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	125	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	125	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	125	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	250	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	125	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	187.5	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	1250	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	187.5	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	187.5	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	375	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2250	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	375	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	375	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	375	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	344	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	375	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	375	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	375	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	2500	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	2500	-
Cl-5.3, Table-3 (x)(Uranium)	-	1865	-
Cl-5.4 (ii)(Total pesticide residue)	-	3125	-
Cl-5.2.3(Faecal streptococci)	-	312.5	-
Cl-5.2.8(shigella)	-	562.5	-
Cl-5.2.9(V.parahaemolyticus)	-	562.5	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	437	-
5.4 i)(Dieldrin)	-	104	-
5.4 i)(Aldrin)	-	104	-
5.4 i)(Malathion)	-	104	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	104	-
5.4 i)(Methyl Paraoxon)	-	104	-
5.4 i)(Methyl Parathion)	-	104	-
5.4 i)(Atrazine)	-	104	-
5.4 i)(Alachlor)	-	104	-
5.4 i)(Isoproturon)	-	104	-
5.4 i)(Butachlor)	-	104	-
5.4 i)(2,4-D)	-	109	-
5.4 i)(Phorate sulphone)	-	104	-
5.4 i)(Phorate sulphoxide)	-	104	-
5.4 i)(Phorate)	-	104	-
5.4 i)(Chlorpyrifos)	-	104	-
5.4 i)(Ethion)	-	104	-
5.4 i)(Monocrotophos)	-	104	-
5.4 i)(Endosulfan Sulphate)	-	104	-
5.4 i)(beta-Endosulfan)	-	104	-
5.4 i)(alpha-Endosulfan)	-	104	-
5.4 i)(Delta-HCH)	-	104	-
5.4 i)(beta-HCH)	-	104	-
5.4 i)(alpha-HCH)	-	104	-
5.4 i)(Gamma-HCH (Lindane))	-	104	-
5.4 i)(p,p DDD)	-	104	-
5.4 i)(o,p DDD)	-	104	-
5.4 i)(p,p DDE)	-	104	-
5.4, i)(o,p DDE)	-	104	-
5.4 i)(p,p DDT)	-	104	-
5.4 i)(o,p DDT)	-	104	-
5.3(Appearance)	-	104	-
5.3/Table 2/xiii(Suphate)	-	104	-
5.4/Annex D/i(P,P-DDT)	-	104	-
5.4/Annex D/ii(Lindane)	-	104	-
5.4/Annex D/iv(b-Endosulfan)	-	104	-
5.4/Annex D/xvi(Dieldrin)	-	104	-
5.4/Annex D/xvi(Aldrin)	-	104	-
5.4/Annex D/i(O,P-DDT)	-	104	-
5.4/Annex D/iv(a-Endosulfan)	-	104	-
5.4/Annex D/iii(d-HCH)	-	104	-
5.4/Annex D/i(O,P-DDD)	-	104	-
5.4/Annex D/i(P,P-DDE)	-	104	-
5.4/Annex D/i(O,P-DDE)	-	104	-
5.4/Annex D/iii(a-HCH)	-	104	-
5.4/Annex D/iii(β- HCH)	-	104	-
5.4/Annex D/iv(Endosulfan sulfate)	-	104	-
5.4/Annex D/i(P,P-DDD)	-	104	-
5.4/Annex D/xii(Alachlor)	-	104	-
5.4/Annex D/vii(Chlorpyrifos)	-	104	-
5.4/Annex D/x(Butachlor)	-	104	-
5.4/Annex D/vi(Ethion)	-	104	-
5.4/Annex D/xiv(Methyl parathion)	-	104	-
5.4/Annex D/xv(Malathion)	-	104	-
5.4/Annex D/viii(Phorate)	-	104	-
5.4/Annex D/v(Monochrotophos)	-	104	-
5.4/Annex D/xiii(Atrazine)	-	104	-
5.4/Annex D/viii(Phorate sulphoxide)	-	104	-
5.4/Annex D/viii(Phorate sulfone)	-	104	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	104	-
5.4/Annex D/xxviii(Malaoxon)	-	104	-
5.4/Annex D/xi(Isoproturon)	-	104	-
5.4/Annex D/ix(2,4 –D)	-	109	-
Cl-5.1(General Requirements)	-	500	-
Table 3, x)(Uranium)	-	1865	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	3125	-

02 Jul, 2027

-
Included w.e.f.29.07.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

5295

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	500	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	500	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2500	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	500	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	500	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	0	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	0	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	0	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	0	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	0	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	0	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	0	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	0	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	0	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	0	-
7.2(Uniformity Requirements)	-	500	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	1000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	6000	-

19 Aug, 2027

-
Included w.e.f 16.07.2025

5296

Stellar Test House, Noida

8171606

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	2000	-
Cl-5.2(Filter Pads)	-	2000	-
Cl-5.3(Sump Tank Capacities)	-	2000	-
Cl-5.4(Blower/Fan)	-	2000	-
Cl-5.4.3(Fan motor)	-	2000	-
Cl-5.5(Pump Set)	-	2000	-
Cl-5.6.1(Electrical wiring and connection)	-	2000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-5.7(Switches)	-	4000	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	4000	-
Cl-8.2(Sound Test)	-	4000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	8000	-
Cl-8.4(Cooling Efficiency Test)	-	8000	-
Cl-8.5(Power Consumption)	-	4000	-
Cl-8.6(EER Calculation Method)	-	4000	-
Cl-8.7(Drop Test)	-	2000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	2000	-
Cl-12.2.2(Protection against Electric Shock)	-	2000	-
Cl-12.2.3(High Voltage Tests)	-	3000	-
Cl-12.2.4(Leakage Current)	-	2000	-
Cl-12.2.5(Provision for Earthing)	-	2000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	2000	-
Cl-14(Storage)	-	1000	-
Cl-5.1(Enclosure)	-	0	-
Cl-5.2(Filter Pads)	-	0	-
Cl-5.3(Sump Tank Capacities)	-	0	-
Cl-5.4(Blower/Fan)	-	0	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	0	-
Cl-5.6.2(Suitable power cable)	-	0	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	0	-
Cl-8.1(Performance Requirement)	-	0	-
Cl-8.2(Sound Test)	-	0	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	0	-
Cl-8.4(Cooling Efficiency Test)	-	0	-
Cl-8.5(Power Consumption)	-	0	-
Cl-8.6(EER Calculation Method)	-	0	-
Cl-8.7(Drop Test)	-	0	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	0	-
Cl-12.2.1(General Running Tests)	-	0	-
Cl-12.2.2(Protection against Electric Shock)	-	0	-
Cl-12.2.3(High Voltage Tests)	-	0	-
Cl-12.2.4(Leakage Current)	-	0	-
Cl-12.2.5(Provision for Earthing)	-	0	-
Cl-12.2.6(Finish)	-	0	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	0	-

26 Sep, 2028

-
Included w.e.f 28.07.2025

5297

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
31(Resistance to rusting)	-	2000	-
30.3(Resistance to heat and fire)	-	2000	-
30.2(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
30.1(Resistance to heat and fire)	-	2000	-
29.2 & 29.3(Clearances, creepage distances )	-	2000	-
29.1 and table 2(creepage and Clearances distances )	-	2000	-
28.2 to 28.4(Screws and connections)	-	2000	-
28.1, Table No.-14(Screws and connections)	-	2000	-
27.5(Provision for earthing)	-	2000	-
27.1 to 27.4(Provision for earthing)	-	2000	-
26.10 & 26.13(Terminals for external conductors)	-	2000	-
26.9(Terminals for external conductors)	-	2000	-
26.1 to 26.8(Terminals for external conductors)	-	2000	-
25.7 to 25.13(Supply connection and external flexible cords)	-	2000	-
25.6(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.4(Supply connection and external flexible cords)	-	2000	-
25.3(Supply connection and external flexible cords)	-	2000	-
25.2(Supply connection and external flexible cords)	-	2000	-
25.1(Supply connection and external flexible cords)	-	2000	-
24.2 ,24.3,24.5 & 24.6(Components)	-	2000	-
24.1(Components)	-	2000	-
23.5 to 23.8(Internal wiring)	-	2000	-
23.4(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	2000	-
23.1 & 23.2(Internal wiring)	-	2000	-
22.101 to 22.103(Constructions)	-	2000	-
22.13 to 22.33(Constructions)	-	2000	-
22.12(Constructions)	-	2000	-
22.11(Constructions)	-	2000	-
22.7 to 22.10(Constructions)	-	2000	-
22.6(Constructions)	-	2000	-
22.5(Constructions)	-	2000	-
22.4(Constructions)	-	2000	-
22.3(Constructions)	-	2000	-
22.2(Constructions)	-	2000	-
22.1(Constructions)	-	2000	-
21.2(MECHANICAL STRENGTH)	-	2000	-
21.1(MECHANICAL STRENGTH)	-	2000	-
20.2(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	2000	-
19.103(ABNORMAL OPERATION)	-	2000	-
19.102(ABNORMAL OPERATION)	-	2000	-
19.101(ABNORMAL OPERATION)	-	2000	-
19.11(ABNORMAL OPERATION)	-	2000	-
19.9(ABNORMAL OPERATION)	-	2000	-
19.7(ABNORMAL OPERATION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
17(Over load Protection )	-	2000	-
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	2000	-
15.103(Moisture resistance)	-	2000	-
15.102(Moisture resistance)	-	2000	-
15.101(Moisture resistance)	-	2000	-
15.4(Moisture resistance)	-	2000	-
15.3(Moisture resistance)	-	2000	-
15.2(Moisture resistance)	-	2000	-
15(Moisture resistance)	-	5000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
12,12.1,12.2 & 12.3(Heating)	-	2000	-
11.103(TEMPERATURE RISE)	-	2000	-
11.102(TEMPERATURE RISE)	-	2000	-
11.101(TEMPERATURE RISE)	-	2000	-
11.1(TEMPERATURE RISE)	-	2000	-
11.8(TEMPERATURE RISE)	-	2000	-
11.7(TEMPERATURE RISE)	-	2000	-
11.6(TEMPERATURE RISE)	-	2000	-
11.5(TEMPERATURE RISE)	-	2000	-
11.4(TEMPERATURE RISE)	-	2000	-
11.2(TEMPERATURE RISE)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
10.1,10.2 10.101,10.102( Input and Current)	-	2000	-
9.2(Startability Test)	-	2000	-
9.1(Startability Test)	-	2000	-
9(Starting of motor operated Appliances)	-	2000	-
8.1.5(Protection against access to live parts)	-	2000	-
8.1.4(Protection against access to live parts)	-	2000	-
8.1.3(Protection against access to live parts)	-	2000	-
8.1.2(Protection against access to live parts)	-	2000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	2000	-
7.1 , 7.12, 7.14,7.15(Marking)	-	2000	-
6(Classifications)	-	2000	-
6(Classifications)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

5298

CIPET. MYSURU

6113734

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Size

157725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	300	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	-
7.1.3 (Effective length)	-	0	-
8(Pipe Ends)	-	300	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	500	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	575	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	16650	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	-
10.4 IS 12235(Part 19)(Flattening Test)	-	500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	-
5 Table 1(Classification of pipes)	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1200	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	1100	-
6.3.3(Density)	-	0	-

31 Dec, 2026

-
Included w.e.f 07.07.2025 Exclusion: Cl 6.2.1 Annex B (Chloride Content of Resin), Cl 6.3 (Compound Properties), Cl 6.3.1 Annex B (Chloride content), Cl 6.3.2 Annex C (Verification of the Malfunction Temperature, Tmal: )

5299

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 7092 : Part 1 (1992)

Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)

All Grade / Type / Size / Designation

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	500	-
5(Workmanship and Finish)	-	1500	-
8(Dimensions)	-	1000	-
7.2(Mechanical properties)	-	2500	-
7.3(Flattening test)	-	2000	-
7.4(Hydrostatic test)	-	2000	-

-
Included w.e.f.28.07.2025

5300

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

235000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	55000	5% Discount for BIS
6(CLASSIFICATION)	-	55000	5% Discount for BIS
7(MARKING AND INSTRUCTIONS)	-	55000	5% Discount for BIS
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	55000	5% Discount for BIS
10(POWER INPUT AND CURRENT)	-	55000	5% Discount for BIS
11(HEATING)	-	55000	5% Discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	55000	5% Discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	55000	5% Discount for BIS
15(MOISTURE RESISTANCE)	-	55000	5% Discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	55000	5% Discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	55000	5% Discount for BIS
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	55000	5% Discount for BIS
18(ENDURANCE)	-	55000	5% Discount for BIS
19(ABNORMAL OPERATION)	-	55000	5% Discount for BIS
19.11.4.1(Electrostatic discharges)	-	180000	-
19.11.4.2(Radiated fields)	-	180000	-
19.11.4.3(Fast transient bursts)	-	180000	-
19.11.4.4(Surge immunity test)	-	180000	-
19.11.4.5(Immunity to conducted discharges)	-	180000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	180000	-
19.11.4.7(Harmonics)	-	180000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	55000	5% Discount for BIS
21(MECHANICAL STRENGTH)	-	55000	5% Discount for BIS
22(CONSTRUCTION)	-	55000	5% Discount for BIS
23(INTERNAL WIRING)	-	55000	5% Discount for BIS
24(COMPONENTS)	-	55000	5% Discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	55000	5% Discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	55000	5% Discount for BIS
27(PROVISION FOR EARTHING)	-	55000	5% Discount for BIS
28(SCREWS AND CONNECTIONS)	-	55000	5% Discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	55000	5% Discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	55000	5% Discount for BIS
31(RESISTANCE TO RUSTING)	-	55000	5% Discount for BIS
19.13(ABNORMAL OPERATION)	-	55000	5% Discount for BIS
19.101(Abnormal Operation)	-	55000	5% Discount for BIS
19.102(Abnormal Operation)	-	55000	5% Discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	55000	5% Discount for BIS
4(GENERAL REQUIREMENT)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING AND INSTRUCTIONS)	-	0	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
19.13(ABNORMAL OPERATION)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-

08 May, 2028

-
Included w.e.f.22.07.2025 Exclusion Excluding Components

5301

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17635 (2022)

Beds - Specification

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
CLAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE)	-	12000	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	8000	-
CLAUSE 7(SAFETY TESTS)	-	1000	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	2000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	2000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	2000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	5000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	5000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	5000	-
CLAUSE 7.7(Vertical Impact Test)	-	2000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	5000	-
CLAUSE 8.2(Extendable Storage Elements)	-	5000	-
Cl-5(Dimensions)	-	0	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	3000	-
Cl-6.1 (b)(Pencil hardness)	-	1000	-
Cl-6.1 (c)(Resistance to wet heat)	-	2000	-
Cl-6.1 (d)(Resistance to dry heat)	-	2000	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	2000	-
Cl-6.1 (g)(Adhesive performance)	-	2000	-
Cl-6.2 (a) 1(Breaking load)	-	600	-
Cl-6.2 (a) 2(Elongation at break)	-	600	-
Cl-6.2 (a) 3(Tear strength)	-	600	-
Cl-6.2 (a) 4(Colour fastness to light)	-	1000	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	400	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	650	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	1000	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	700	-
Cl-6.2 (a) 10(Seam slippage)	-	800	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	2000	-
Cl-6.2 (a) 12(Abrasion resistance)	-	1000	-
Cl-6.2 (a) 13(Bursting strength)	-	700	-
Cl-6.2 (a) 14(Resistance to cold)	-	500	-
Cl-6.2 (b) 1(Tear strength)	-	650	-
Cl-6.2 (b) 2(Flexing endurance)	-	200	-
Cl-6.2 (b) 3(Finish adhesion)	-	700	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	2000	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	1000	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	700	-
Cl-6.2 (b) 8(Colour fastness to water)	-	600	-
Cl-7.1(Safety Tests)	-	1000	-
Cl-7.2(Safety Tests)	-	1000	-
Cl-7.3(Stability Test)	-	1000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	1000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	1000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	2000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	0	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	0	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	0	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	0	-
Cl-7.7(Vertical Impact Test)	-	0	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	0	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	0	-
Cl-10(Marking)	-	0	-

-
Included w.e.f.09.07.2025

5302

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
3(GENERAL REQUIREMENTS)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 Component

5303

IEC TEST LABS LLP

8165726

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	5000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	5000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	5000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	5000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	5000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	30000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	40000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	15000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	15000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	10000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	5000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	20000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	5000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	5000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	20000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	50000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	5000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	20000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	20000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	10000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	10000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	10000	-
IS 191:2007 & IS 440(Copper purity test)	-	20000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	10000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	10000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	10000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	10000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	10000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	10000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	10000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	10000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-

07 Sep, 2029

-
Included w.e.f.18.08.2025

5304

BIS, Guwahati Branch Laboratory (GBL)

None

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-

-
Disabled.

5305

Sleen India Biz venture Private Limited, Agra

9139736

IS 3521 : Part 2 (2021)

Personal Fall Arrest Systems Specification Part 2 Lanyards and Energy Absorbers

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.5(Adjustment Slippage)	-	3000	-
4.2.6(Static strength)	-	3000	-
4.2.7(Dynamic strength for adjustable lanyards)	-	3000	-
4.3.4(Inadvertent operation)	-	2000	-
4.3.5(Dynamic performance)	-	3000	-
5.2.4(Corrosion resistance)	-	5000	-
4.2.1(Fibre ropes and webbing)	-	2000	-
4.2.2(Chains)	-	2000	-
4.2.3(Terminations)	-	1000	-
4.2.4(Fittings)	-	3000	-
4.2.5(Adjustment slippage)	-	0	-
4.3.2(Terminations)	-	6000	-
4.3.3(Energy-absorbing lanyards and FBH with energy absorber)	-	3000	-
4.3.6(Static strength)	-	3000	-
4.3.7(Dynamic performance after conditioning)	-	4000	-
6.2(Marking)	-	500	-
4.2.5(Adjustment Slippage)	-	-	-
4.2.6(Static strength)	-	-	-
4.2.7(Dynamic strength for adjustable lanyards)	-	-	-
4.3.4(Inadvertent operation)	-	-	-
4.3.5(Dynamic performance)	-	-	-
5.2.4(Corrosion resistance)	-	-	-
4.2.1(Fibre ropes and webbing)	-	-	-
4.2.2(Chains)	-	-	-
4.2.3(Terminations)	-	-	-
4.2.4(Fittings)	-	-	-
4.2.5(Adjustment slippage)	-	-	-
4.3.2(Terminations)	-	-	-
4.3.3(Energy-absorbing lanyards and FBH with energy absorber)	-	-	-
4.3.6(Static strength)	-	-	-
4.3.7(Dynamic performance after conditioning)	-	-	-
6.2(Marking)	-	-	-

-
Included w.e.f 08.12.2025

5306

BIS, Guwahati Branch Laboratory (GBL)

None

IS 6909 (1990)

Supersulphated cement ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2 (Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Chloride content)	-

-
Disabled.

5307

BIS, Guwahati Branch Laboratory (GBL)

None

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

12900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration - 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Qty. required (8+1) kg Except sulphate expansion and transverse test (optional).

5308

BIS, Guwahati Branch Laboratory (GBL)

None

IS 12600 (1989)

Portland cement, low heat - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 v ( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.2 (Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 note 2 (Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-

-
Disabled.

5309

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	2000	-
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	2000	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	2000	-
10(INPUT AND CURRENT)	-	2000	-
11(TEMPERATURE RISE)	-	2000	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	2000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	2000	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	2000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

5310

BIS, Northern Regional Laboratory (NRL)

None

IS 5950 (2024)

Shot Firing Cables (for Use Other than in Shafts) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Section-2, Cl-3 (CONDUCTOR)	-
Section-2, Cl-4 (INSULATION)	-
Section-2, Cl-5 (SHEATH)	-
Section-3, Cl-6 (CONDUCTOR)	-
Section-3, Cl-7.1.1 (Thickness of Insulation & Sheath)	-
Section-3, Cl-7.2 (Tolerance on Thickness of Insulation)	-
Section-3, Cl-7.3 (Colour of Insulation)	-
Cl-9.1 (a) (Annealing test;)	-
Cl-9.1 (b) (Conductor resistance test)	-
Cl-9.1 (d) 1 (Tensile strength and elongation at break)	-
Cl-9.1 (d) 2 (Ageing in air oven)	-
Cl-9.1 (d) 3 (Loss of mass test)	-
Cl-9.1 (d) 4 (Hot deformation)	-
Cl-9.1 (d) 5 (Heat shock)	-
Cl-9.1 (d) 6 (hrinkage)	-
Cl-9.2 , e (Insulation resistance test)	-
Cl-10.4 (Flammability Test)	-
Cl-10.2 (Voltage Test)	-
Section-2, Cl-3 (CONDUCTOR)	-
Section-2, Cl-4 (INSULATION)	-
Section-2, Cl-5 (SHEATH)	-
Section-3, Cl-6 (CONDUCTOR)	-
Section-3, Cl-7.1.1 (Thickness of Insulation & Sheath)	-
Section-3, Cl-7.1.2 (Type II)	-
Section-3, Cl-7.2 (Tolerance on Thickness of Insulation)	-
Section-3, Cl-7.3 (Colour of Insulation)	-
Section-3, Cl-8.1 (Single-Core)	-
Section-3, Cl-8.2 (Tolerance on Thickness of Sheath)	-
Section-3, Cl-8.3 (Color of Sheath)	-
Cl-10.2 (Voltage Test)	-
Cl-10.4 (Flammability Test)	-
Cl-9.1 (a) (Annealing test;)	-
Cl-9.1 (b) (Conductor resistance test)	-
Cl-9.1 (c) (Test for thickness of insulation and sheath)	-
Cl-9.1 (d) 1 (Tensile strength and elongation at break)	-
Cl-9.1 (d) 2 (Ageing in air oven)	-
Cl-9.1 (d) 3 (Loss of mass test)	-
Cl-9.1 (d) 4 (Hot deformation)	-
Cl-9.1 (d) 5 (Heat shock)	-
Cl-9.1 (d) 6 (hrinkage)	-
Cl-9.2 , e (Insulation resistance test)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number