BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5341

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17635 (2022)

Beds - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	200	-
CLAUSE 5(Dimensions)	-	1300	-
CLAUSE 6(SURFACE PERFORMANCE)	-	4800	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	12500	-
CLAUSE 7(SAFETY TESTS)	-	9000	-
CLAUSE 7.3(Stability Test)	-	1000	-
CLAUSE 7.4(Vertical Static Load Tests)	-	1000	-
CLAUSE 7.5(Horizontal Static Load Tests)	-	1000	-
CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
CLAUSE 7.6.1(Vertical Durability Test of Bed Base)	-	1000	-
CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame)	-	1000	-
CLAUSE 7.6.3(Horizontal Durability Test of Headboards)	-	1000	-
CLAUSE 7.7(Vertical Impact Test)	-	1000	-
CLAUSE 8.1(Mechanisms for Lifting Bed Bases)	-	1000	-
CLAUSE 8.2(Extendable Storage Elements)	-	1000	-
Cl-5(Dimensions)	-	1300	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	800	-
Cl-6.1 (b)(Pencil hardness)	-	200	-
Cl-6.1 (c)(Resistance to wet heat)	-	500	-
Cl-6.1 (d)(Resistance to dry heat)	-	500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	800	-
Cl-6.1 (g)(Adhesive performance)	-	1000	-
Cl-6.2 (a) 1(Breaking load)	-	500	-
Cl-6.2 (a) 2(Elongation at break)	-	500	-
Cl-6.2 (a) 3(Tear strength)	-	500	-
Cl-6.2 (a) 4(Colour fastness to light)	-	500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	500	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	500	-
Cl-6.2 (a) 10(Seam slippage)	-	500	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	500	-
Cl-6.2 (a) 12(Abrasion resistance)	-	500	-
Cl-6.2 (a) 13(Bursting strength)	-	1500	-
Cl-6.2 (a) 14(Resistance to cold)	-	500	-
Cl-6.2 (b) 1(Tear strength)	-	1500	-
Cl-6.2 (b) 2(Flexing endurance)	-	500	-
Cl-6.2 (b) 3(Finish adhesion)	-	500	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	500	-
Cl-7.1(Safety Tests)	-	1000	-
Cl-7.2(Safety Tests)	-	1000	-
Cl-7.3(Stability Test)	-	1000	-
Cl-7.4.1(Vertical Static Load on Bed Base)	-	1000	-
Cl-7.4.2(Vertical Static Load on Side Rail)	-	1000	-
Cl-7.5.1(Horizontal Static Load on Headboard)	-	1000	-
Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard)	-	1000	-
Cl-7.6.1(Vertical Durability Test of Bed Base)	-	1000	-
Cl-7.6.2(Horizontal Durability Test of Bed Frame)	-	1000	-
Cl-7.6.3(Horizontal Durability Test of Headboards)	-	1000	-
Cl-7.7(Vertical Impact Test)	-	1000	-
Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases)	-	1000	-
Cl-8.2.2(Durability of Extendable Storage Elements)	-	1000	-
Cl-10(Marking)	-	200	-

-
Included w.e.f 04.08.2025

5342

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3(Specifications)	-	5000	10% discount BIS
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	10% discount BIS
3.5(Safety specification)	-	35000	10% discount BIS
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	200000	10% discount BIS
4(Marking)	-	5000	10% discount BIS
5(Operating Life Test)	-	10000	10% discount BIS
3.1, Table-1, i) a)(Hardware specification)	-	5000	10% discount BIS
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	10% discount BIS
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	10% discount BIS
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	10% discount BIS
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	10% discount BIS
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	10% discount BIS
3.1, Table-1, i) g)(Teletext)	-	5000	10% discount BIS
3.1, Table-1, i) h)(Multi-language support)	-	5000	10% discount BIS
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	10% discount BIS
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	10% discount BIS
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	10% discount BIS
3.1, Table-1, i) n)(Data services)	-	5000	10% discount BIS
3.1, Table-1, i) p)(OSD)	-	5000	10% discount BIS
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	10% discount BIS
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	10% discount BIS
3.1, Table-1, i) s)(Time)	-	5000	10% discount BIS
3.1, Table-1, i) t)(Digital TV output)	-	5000	10% discount BIS
3.4, Table-2, i) a)(Input voltage range)	-	5000	10% discount BIS
3.4, Table-2, i) b)(Frequency)	-	5000	10% discount BIS
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	10% discount BIS
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	10% discount BIS
3.1, Table-1, ii) c)(Network evolution)	-	5000	10% discount BIS
3.4, Table-2, iii) c)(RF input impedance)	-	5000	10% discount BIS
3.1, Table-1, ii) d)(Services available)	-	5000	10% discount BIS
3.1, Table-1, ii) e)(Selection via Service List)	-	5000	10% discount BIS
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	10% discount BIS
3.1, Table-1, ii) g)(Favourite Channel list)	-	5000	10% discount BIS
3.1, Table-1, ii) h)(Hidden Services)	-	5000	10% discount BIS
3.4, Table-2, iii) b)(Input frequency range)	-	5000	10% discount BIS
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	10% discount BIS
3.1, Table-1, ii) k)(RF input signal)	-	5000	10% discount BIS
3.1, Table-1, ii) m)(LNB supply current)	-	5000	10% discount BIS
3.1, Table-1, ii) n)(LNB supply voltage)	-	5000	10% discount BIS
3.1, Table-1, ii) p)(LNB Control)	-	5000	10% discount BIS
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	10% discount BIS
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	10% discount BIS
3.4, Table-2, iv) c)(RF input impedance)	-	5000	10% discount BIS
3.4, Table-2, iv) b)(Input frequency range)	-	5000	10% discount BIS
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	10% discount BIS
3.4, Table-2, v)(Symbol rate)	-	5000	10% discount BIS
3.4, Table-2, vi)(RF input return loss)	-	5000	10% discount BIS
3.4, Table-2, vii)(DisEqC)	-	5000	10% discount BIS
3.4, Table-2, viii)(Operating ambient temperature range)	-	5000	10% discount BIS
3.4, Table-2, ix)(Operating humidity range)	-	5000	10% discount BIS
3.4, Table-2, x)(Power consumption)	-	10000	10% discount BIS
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	10% discount BIS
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	10% discount BIS
3.1, Table-1, v) a)(Remote Control)	-	5000	10% discount BIS
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	10% discount BIS
3.1, Table-1, v) c)(Support package)	-	5000	10% discount BIS
3.3(Specifications)	-	-	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	-	-
3.5(Safety specification)	-	-	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	-	-
4(Marking)	-	-	-
5(Operating Life Test)	-	-	-
3.1, Table-1, i) a)(Hardware specification)	-	-	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	-	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	-	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	-	-
3.1, Table-1, i) e)(Active Format descriptors)	-	-	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	-	-
3.1, Table-1, i) g)(Teletext)	-	-	-
3.1, Table-1, i) h)(Multi-language support)	-	-	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	-	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	-	-
3.1, Table-1, i) m)(Service demultiplexing)	-	-	-
3.1, Table-1, i) n)(Data services)	-	-	-
3.1, Table-1, i) p)(OSD)	-	-	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	-	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	-	-
3.1, Table-1, i) s)(Time)	-	-	-
3.1, Table-1, i) t)(Digital TV output)	-	-	-
3.4, Table-2, i) a)(Input voltage range)	-	-	-
3.4, Table-2, i) b)(Frequency)	-	-	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	-	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	-	-
3.1, Table-1, ii) c)(Network evolution)	-	-	-
3.4, Table-2, iii) c)(RF input impedance)	-	-	-
3.1, Table-1, ii) d)(Services available)	-	-	-
3.1, Table-1, ii) e)(Selection via Service List)	-	-	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	-	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	-	-
3.1, Table-1, ii) h)(Hidden Services)	-	-	-
3.4, Table-2, iii) b)(Input frequency range)	-	-	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	-	-
3.1, Table-1, ii) k)(RF input signal)	-	-	-
3.1, Table-1, ii) m)(LNB supply current)	-	-	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	-	-
3.1, Table-1, ii) p)(LNB Control)	-	-	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	-	-
3.4, Table-2, iii) a)(Input level per carrier)	-	-	-
3.4, Table-2, iv) c)(RF input impedance)	-	-	-
3.4, Table-2, iv) b)(Input frequency range)	-	-	-
3.4, Table-2, iv) a)(Input level per carrier)	-	-	-
3.4, Table-2, v)(Symbol rate)	-	-	-
3.4, Table-2, vi)(RF input return loss)	-	-	-
3.4, Table-2, vii)(DisEqC)	-	-	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	-	-
3.4, Table-2, ix)(Operating humidity range)	-	-	-
3.4, Table-2, x)(Power consumption)	-	-	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	-	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	-	-
3.1, Table-1, v) a)(Remote Control)	-	-	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	-	-
3.1, Table-1, v) c)(Support package)	-	-	-

-
Included w.e.f. 07.08.2025

5343

Unique Test House LLP

9134536

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

19000 H4, 31000 H4, 31500 H4, 40800 H4, 51300 H4

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	500	OK
4(SUPPLY OF MATERIAL)	-	500	OK
5(PROFILE)	-	300	OK
6(MATERIAL)	-	500	OK
7.2(WIDTH)	-	400	OK
7.3(LENGTH)	-	500	OK
7.4(SQUARENESS)	-	500	OK
7.5(Depth and Pitch of the Corrugation)	-	300	OK
8(FINISH)	-	300	OK
9(MARKING)	-	300	OK
2(REFERENCES)	-	400	OK
2(REFERENCES)	-	500	OK
3(Freedom From Defects)	-	300	OK
4(Supply of Material)	-	100	OK
5(PROFILE)	-	100	OK
5.1(PROFILE)	-	100	OK
5.2(PROFILE)	-	400	OK
6(MATERIAL)	-	300	OK
7(Dimenstions and Tolerences)	-	300	OK
7.1(Dimenstions and Tolerences)	-	500	OK
7.2(WIDTH)	-	500	OK
7.3(LENGTH)	-	500	OK
7.4(SQUARENESS)	-	1000	OK
7.5(DEPTH AND PITCH OF THE CORRUGATION)	-	500	OK
8(FINISH)	-	200	OK
9(Marking)	-	300	OK
9.1(Marking)	-	500	OK
9.1.1(Marking)	-	200	OK
9.1.2(Marking)	-	200	OK

07 Sep, 2028

-
Included w.e.f.30.06.2025

5344

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	2000	-
Cl-9(Endurance fpr motor and base assembly)	-	5000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	1500	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1500	-
Cl-10.4(Idli Batter)	-	1500	-
Cl-10.5(Operational Tests for Juicers)	-	1500	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	3000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	2000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	2000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	2000	-

03 Oct, 2027

-
-

5345

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 16890 (2024)

Textiles — Protective Clothing for Firefighters — Specification

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General)	-	500	-
Cl-5.2.1(Configuration)	-	500	-
Cl-5.2.2(Restriction of Movement)	-	1000	-
Cl-5.2.3(Multilayer Clothing Assemblies)	-	2000	-
Cl-5.2.4(Seams)	-	1000	-
Cl-5.2.5(Hardware)	-	3000	-
Cl-5.2.6(Closure Systems)	-	4000	-
Cl-5.2.7(Retroreflective Elements)	-	4500	-
Cl-5.2.8(Sleeve Ends)	-	500	-
Cl-5.2.9(Clothing Mass)	-	500	-
Cl-5.2.10(Ease of Cleaning)	-	500	-
Cl-5.2.11(Labels)	-	500	-
Cl-5.2.12(Size Designations)	-	500	-
Cl-7.2(Flame Resistance)	-	3500	-
Cl-7.3(Heat Transfer (Flame Exposure))	-	3500	-
Cl-7.4(Heat Transfer (Radiant Exposure))	-	5000	-
Cl-7.5(Contact Heat)	-	8500	-
Cl-7.6(Residual Strength of Material when Exposed to Radiant Heat)	-	8000	-
Cl-7.7(Heat Resistance)	-	2000	-
Cl-7.8(Tensile Strength)	-	2500	-
Cl-7.8(Tensile Strength)	-	0	-
Cl-7.9(Tear Strength)	-	2500	-
Cl-7.10(Cleaning-Shrinkage Resistance)	-	500	-
Cl-7.11(Liquid-Chemical Penetration Resistance)	-	2000	-
Cl-7.12(Water-penetration Resistance)	-	1500	-
Cl-7.13(Water-vapour Resistance)	-	5000	-
Cl-8(Marking)	-	500	-
Cl-5.1(General)	-	0	-
Cl-5.2.1(Configuration)	-	0	-
Cl-5.2.2(Restriction of Movement)	-	0	-
Cl-5.2.3(Multilayer Clothing Assemblies)	-	0	-
Cl-5.2.4(Seams)	-	0	-
Cl-5.2.5(Hardware)	-	0	-
Cl-5.2.6(Closure Systems)	-	0	-
Cl-5.2.7(Retroreflective Elements)	-	0	-
Cl-5.2.8(Sleeve Ends)	-	0	-
Cl-5.2.9(Clothing Mass)	-	0	-
Cl-5.2.10(Ease of Cleaning)	-	0	-
Cl-5.2.11(Labels)	-	0	-
Cl-5.2.12(Size Designations)	-	0	-
Cl-7.2(Flame Resistance)	-	0	-
Cl-7.3(Heat Transfer (Flame Exposure))	-	0	-
Cl-7.4(Heat Transfer (Radiant Exposure))	-	0	-
Cl-7.5(Contact Heat)	-	0	-
Cl-7.6(Residual Strength of Material when Exposed to Radiant Heat)	-	0	-
Cl-7.7(Heat Resistance)	-	0	-
Cl-7.8(Tensile Strength)	-	0	-
Cl-7.8(Tensile Strength)	-	0	-
Cl-7.9(Tear Strength)	-	0	-
Cl-7.10(Cleaning-Shrinkage Resistance)	-	0	-
Cl-7.11(Liquid-Chemical Penetration Resistance)	-	0	-
Cl-7.12(Water-penetration Resistance)	-	0	-
Cl-7.13(Water-vapour Resistance)	-	0	-
Cl-8(Marking)	-	0	-

08 Feb, 2027

-
Included w.e.f 28.07.2025

5346

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 18809 (2024)

Wear and abrasion resistant steel sheet and plate ï¿½ Specification

Plate and Sheet

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(References)	-	0	-
3(Supply of Material)	-	0	-
3.1(Supply of Material)	-	0	-
3.2(Supply of Material)	-	0	-
3.3(Supply of Material)	-	0	-
4(Terminology)	-	0	-
4.1(Quenching)	-	0	-
4.2(Tempering)	-	0	-
4.3(Wear and Abrasion Resistant Steel)	-	0	-
4.4(Product)	-	0	-
5(Classification and Designation)	-	0	-
5.1(Designation)	-	0	-
5.2 (Table 1)(Grades (Hardness) HBW)	-	0	-
6(Manufacture)	-	0	-
6.1(Manufacture)	-	0	-
6.2(Manufacture)	-	0	-
7.1 (Table 2)(Chemical Compostion ( C))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( Mn))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( Si))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( P))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( S))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( Cr))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( Mo))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( Ni))	-	7000	-
7.1 (Table 2)(Chemical Compostion ( B))	-	7000	-
7.1 (Table 3)(Chemical Compostion ( Carbon Equivalent))	-	7000	-
7.1 (Table 3)(Chemical Compostion ( Al))	-	7000	-
7.1 (Table 3)(Chemical Compostion ( Nb))	-	7000	-
7.1 (Table 3)(Chemical Compostion ( V))	-	7000	-
7.1 (Table 3)(Chemical Compostion (Ti))	-	7000	-
7.1 (Table 3)(Chemical Compostion ( N))	-	7000	-
8 (Table -6)(Mechanical Properties ( Yield Strength )Mpa)	-	7000	-
8 (Table -6)(Mechanical Properties ( Tensile Strength )Mpa)	-	7000	-
8 (Table -6)(Mechanical Properties ( Elongation )%)	-	7000	-
8 (Table -7)(Bend Radius (Bend Angle:90 deg.))	-	7000	-
8 (Table 8)(Charpy Impact Value)	-	7000	-
8.1 (Table-5)(Hardness Test)	-	7000	-
8.2(Tensile test)	-	7000	-
8.3 (Table 7)(Bend Test)	-	7000	-
8.4 (Table 8)(Charpy V-Notch- Impact Test)	-	7000	-
9(Non Destrictive Test)	-	0	-
10(Retest)	-	14000	-
11(Freedom From Defects)	-	7000	-
12(Dimenstions and Tolerences)	-	7000	-
13(Marking)	-	0	-
14(Delivery)	-	0	-
15(BIS Certification Marking)	-	0	-
16(Ordering Information)	-	0	-
Cl.7(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Phosphorus - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
2(References)	-	0	-
3(Supply of Material)	-	0	-
3.1(Supply of Material)	-	0	-
3.2(Supply of Material)	-	0	-
3.3(Supply of Material)	-	0	-
4(Terminology)	-	0	-
4.1(Quenching)	-	0	-
4.2(Tempering)	-	0	-
4.3(Wear and Abrasion Resistant Steel)	-	0	-
4.4(Product)	-	0	-
5(Classification and Designation)	-	0	-
5.1(Designation)	-	0	-
5.2 (Table 1)(Grades (Hardness) HBW)	-	0	-
6(Manufacture)	-	0	-
6.1(Manufacture)	-	0	-
6.2(Manufacture)	-	0	-
7.1 (Table 2)(Chemical Compostion ( C))	-	0	-
7.1 (Table 2)(Chemical Compostion ( Mn))	-	0	-
7.1 (Table 2)(Chemical Compostion ( Si))	-	0	-
7.1 (Table 2)(Chemical Compostion ( P))	-	0	-
7.1 (Table 2)(Chemical Compostion ( S))	-	0	-
7.1 (Table 2)(Chemical Compostion ( Cr))	-	0	-
7.1 (Table 2)(Chemical Compostion ( Mo))	-	0	-
7.1 (Table 2)(Chemical Compostion ( Ni))	-	0	-
7.1 (Table 2)(Chemical Compostion ( B))	-	0	-
7.1 (Table 3)(Chemical Compostion ( Carbon Equivalent))	-	0	-
7.1 (Table 3)(Chemical Compostion ( Al))	-	0	-
7.1 (Table 3)(Chemical Compostion ( Nb))	-	0	-
7.1 (Table 3)(Chemical Compostion ( V))	-	0	-
7.1 (Table 3)(Chemical Compostion (Ti))	-	0	-
7.1 (Table 3)(Chemical Compostion ( N))	-	0	-
8 (Table -6)(Mechanical Properties ( Yield Strength )Mpa)	-	0	-
8 (Table -6)(Mechanical Properties ( Tensile Strength )Mpa)	-	0	-
8 (Table -6)(Mechanical Properties ( Elongation )%)	-	0	-
8 (Table -7)(Bend Radius (Bend Angle:90 deg.))	-	0	-
8 (Table 8)(Charpy Impact Value)	-	0	-
8.1 (Table-5)(Hardness Test)	-	0	-
8.2(Tensile test)	-	0	-
8.3 (Table 7)(Bend Test)	-	0	-
8.4 (Table 8)(Charpy V-Notch- Impact Test)	-	0	-
9(Non Destrictive Test)	-	0	-
10(Retest)	-	0	-
11(Freedom From Defects)	-	0	-
12(Dimenstions and Tolerences)	-	0	-
13(Marking)	-	0	-
14(Delivery)	-	0	-
15(BIS Certification Marking)	-	0	-
16(Ordering Information)	-	0	-
Cl.7(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Phosphorus - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-

-
Included w.e.f.04.08.2025

5347

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	15000	-
4.1.2 and A.4.1.2(Maximum height)	-	15000	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	15000	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	15000	-
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	15000	-
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	15000	-
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	15000	-
4.1.4.4 and 6.7.2 (Motion rides)	-	15000	-
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	15000	-
4.1.4.5 (Slides)	-	15000	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	15000	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	15000	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	15000	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	15000	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	15000	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	15000	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	15000	-
4.3(Rung ladders, stepladders and stairways)	-	15000	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	15000	-
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	15000	-
4.3 c(The surface of the tread shall not be slippery)	-	15000	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	15000	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	15000	-
4.3 f(The inclination of stairways)	-	15000	-
4.3 f(The inclination of stepladders)	-	15000	-
4.3 f(The inclination of rung ladders)	-	15000	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	15000	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	15000	-
4.4.1 (Head and neck entrapment)	-	15000	-
4.4.2(Entrapment of clothing and hair)	-	15000	-
4.4.3(Entrapment of feet)	-	15000	-
4.4.4(Entrapment of fingers)	-	15000	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	15000	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	15000	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	15000	-
4.6.1 and A.4.6.(Stability of slides)	-	15000	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	15000	-
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	15000	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	15000	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	15000	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	15000	-
4.7.3.1(Swings intended for children under 36 months)	-	15000	-
4.7.3.1(Swings intended for children under 36 months)	-	15000	-
4.7.3.2(Toddler swings without a crossbeam)	-	15000	-
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	15000	-
4.7.4(Impact from swing elements - Average surface compression)	-	15000	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	15000	-
4.7.5(Free swinging elements)	-	15000	-
4.7.5(Elements excluding free swinging)	-	15000	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	15000	-
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	15000	-
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	15000	-
4.7.8 d and A.4.7.8(Accessible chains)	-	15000	-
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	15000	-
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	15000	-
4.8(Seesaws )	-	15000	-
4.9(Carousels and rocking toys)	-	15000	-
4.9(Carousels and rocking toys)	-	15000	-
4.9(Free height of fall for carousels and rocking toys)	-	15000	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	15000	-
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	15000	-
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	15000	-
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	15000	-
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	15000	-
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	15000	-
4.10.4.4 and A.4.10(Safe collapse)	-	15000	-
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	15000	-
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	15000	-
4.11.1(Paddling pools - General)	-	15000	-
4.11.2(Edges, points, and small parts)	-	15000	-
4.11.2(Edges, points, and small parts)	-	15000	-
4.11.3(Paddling pools with inflatable walls)	-	15000	-
4.11.3(Paddling pools with inflatable walls)	-	15000	-
5.1(Labelling)	-	15000	-
5.2(Assembly and installation instructions)	-	15000	-
5.3(Maintenance instructions)	-	15000	-
5.4(Warnings)	-	15000	-
4.1.1 and 6.2.1( Strength of toys other than swings)	-	15000	-
4.1.2 and A.4.1.2(Maximum height)	-	15000	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	15000	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	15000	-
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	15000	-
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	15000	-
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	15000	-
4.1.4.4 and 6.7.2 (Motion rides)	-	15000	-
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	15000	-
4.1.4.5 (Slides)	-	15000	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	15000	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	15000	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	15000	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	15000	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	15000	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	15000	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	15000	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	15000	-
4.3(Rung ladders, stepladders and stairways)	-	15000	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	15000	-
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	15000	-
4.3 c(The surface of the tread shall not be slippery)	-	15000	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	15000	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	15000	-
4.3 f(The inclination of stairways)	-	15000	-
4.3 f(The inclination of stepladders)	-	15000	-
4.3 f(The inclination of rung ladders)	-	15000	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	15000	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	15000	-
4.4.1 (Head and neck entrapment)	-	15000	-
4.4.2(Entrapment of clothing and hair)	-	15000	-
4.4.3(Entrapment of feet)	-	15000	-
4.4.4(Entrapment of fingers)	-	15000	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	15000	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	15000	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	15000	-
4.6.1 and A.4.6.(Stability of slides)	-	15000	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	15000	-
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	15000	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	15000	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	15000	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.6.4 and A.4.6.(Roller slides)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.1 and A.4.10(Containment - General)	-	15000	-
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	15000	-
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	15000	-
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	15000	-
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	15000	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	15000	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	15000	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	15000	-
4.7.3.1(Swings intended for children under 36 months)	-	15000	-
4.7.3.1(Swings intended for children under 36 months)	-	15000	-
4.7.3.2(Toddler swings without a crossbeam)	-	15000	-
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	15000	-
4.7.4(Impact from swing elements - Average surface compression)	-	15000	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	15000	-
4.7.5(Free swinging elements)	-	15000	-
4.7.5(Elements excluding free swinging)	-	15000	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	15000	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	15000	-
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	15000	-
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	15000	-
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	15000	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	15000	-
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	15000	-
4.8(Seesaws )	-	15000	-
4.9(Carousels and rocking toys)	-	15000	-
4.9(Carousels and rocking toys)	-	15000	-
4.9(Free height of fall for carousels and rocking toys)	-	15000	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	15000	-
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	15000	-
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	15000	-
4.10.4.4 and A.4.10(Safe collapse)	-	15000	-
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	15000	-
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	15000	-
4.11.1(Paddling pools - General)	-	15000	-
4.11.2(Edges, points, and small parts)	-	15000	-
4.11.2(Edges, points, and small parts)	-	15000	-
4.11.3(Paddling pools with inflatable walls)	-	15000	-
4.11.3(Paddling pools with inflatable walls)	-	15000	-
5.1(Labelling)	-	15000	-
5.2(Assembly and installation instructions)	-	15000	-
5.3(Maintenance instructions)	-	15000	-
5.4(Warnings)	-	15000	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	15000	-

08 May, 2028

-
Included w.e.f. 01.09.2025 Exclusion: "4.7.4 (Impact from swing elements - swing elements shall not impart an average peak value of acceleration) 4.7.5 (Minimum clearance between swing elements, and similar equipment and adjacent structures) 4.7.6 and A.4.7.6 (Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam) 4.7.7 (Minimum clearance between swing elements and the ground - Footrests of swing elements) "

5348

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31(Resistance to Rusting)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
28(Screws & Connection)	-	2000	-
27(Provision For Earthing)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
25(Supply Connection & External Flexible Cables and Cords)	-	2000	-
24(Component)	-	2000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	2000	-
21(Mechanical strength)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	3000	-
17(Overload Protection)	-	2000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	2000	-
15(Moisture Resistance)	-	3000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	2000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	2000	-
12(Operation under overload conditions of appliances with heating elements)	-	2000	-
11(Temperature Rise/Heating)	-	2000	-
10(Input)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	2000	-
7(Marking/ Marking & Instructions)	-	2000	-
6(Classification)	-	2000	-
5(Rating)	-	2000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 32 Radiation, toxicity and similar hazards

5349

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17634 (2022)

Storage Units - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5(DIMENSIONS)	-	300	-
CLAUSE 6(SURFACE PERFORMANCE)	-	3800	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	10500	-
CLAUSE 7.1(SAFETY TESTS (General))	-	300	-
CLAUSE 7.2(Test for Non-Movable Parts)	-	300	-
CLAUSE 7.2.1(Shelves)	-	300	-
CLAUSE 7.2.1.2(Deflection of shelves)	-	300	-
CLAUSE 7.2.2.1(Sustained load test for tops and bottoms)	-	300	-
CLAUSE 7.2.2.2(Static load test for tops and bottoms)	-	300	-
CLAUSE 7.2.3.1(Strength of clothes-rail supports)	-	300	-
CLAUSE 7.2.3.2(Dislodgement of clothes rail)	-	300	-
CLAUSE 7.2.4.2(Drop test)	-	500	-
CLAUSE 7.2.4.3(Tests for units with castors or wheels)	-	300	-
CLAUSE 7.3.1(Pivoted Doors)	-	300	-
CLAUSE 7.3.1.2.1(Vertical load on pivoted door)	-	300	-
CLAUSE 7.3.1.2.2(Horizontal load on pivoted door)	-	300	-
CLAUSE 7.3.1.3(Slam-shut test of pivoted doors)	-	300	-
CLAUSE 7.3.1.4(Durability of pivoted doors)	-	400	-
CLAUSE 7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	100	-
CLAUSE 7.3.2.2(Slam shut/open test of sliding doors and horizontal roll-fronts)	-	200	-
CLAUSE 7.3.2.3(Durability of sliding doors and horizontal roll-fronts)	-	200	-
CLAUSE 7.3.3(Flaps)	-	700	-
CLAUSE 7.3.3.1(Strength of bottom-hinged flaps)	-	200	-
CLAUSE 7.3.3.2(Durability of flaps)	-	400	-
CLAUSE 7.3.3.3(Drop test for top-hinged flaps)	-	300	-
CLAUSE 7.3.4(Vertical Roll-Fronts)	-	200	-
CLAUSE 7.3.4.1(Slam shut/open test of vertical roll-fronts)	-	300	-
CLAUSE 7.3.4.2(Durability of vertical roll-fronts)	-	300	-
CLAUSE 7.3.5(Extension Element)	-	100	-
CLAUSE 7.3.5.2(Strength of extension elements)	-	100	-
CLAUSE 7.3.5.3(Durability of extension elements)	-	100	-
CLAUSE 7.3.5.4(Slam shut/open test of extension element)	-	400	-
CLAUSE 7.3.5.5(Displacement of extension element bottoms)	-	400	-
CLAUSE 7.3.5.6(Interlock test)	-	400	-
CLAUSE 7.3.6(Locking and Latching Mechanism Tests)	-	100	-
CLAUSE 7.3.6.2(Strength test for locking and latching mechanisms for extension elements)	-	100	-
CLAUSE 7.3.6.3(Locking and latching mechanisms for doors, flaps and roll-fronts)	-	100	-
CLAUSE 7.3.6.4(Durability test of locking and latching mechanisms)	-	300	-
CLAUSE 7.3.7(Pull Force Test)	-	200	-
CLAUSE 7.3.7(Pull Force Test)	-	200	-
CLAUSE 7.3.8(Top Load Ease Cycle Test)	-	400	-
CLAUSE 7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	400	-
CLAUSE 7.3.10("Drop Test – Dynamic – for Units with Seat Surfaces")	-	400	-
CLAUSE 7.4.1.3(Sustained load test (overload))	-	400	-
CLAUSE 7.4.1.4(Dislodgement test)	-	400	-
CLAUSE 7.5(Stability Tests)	-	200	-
CLAUSE 7.5.2.1("Units that can be adjusted to a Height of 1 000 mm or less")	-	200	-
CLAUSE 7.5.2.2("Units that can be adjusted to a height of more than 1 000 mm")	-	200	-
CLAUSE 7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	200	-
CLAUSE 7.5.6(Vertical Force Stability Test for Storage Units)	-	200	-
CLAUSE 7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	200	-
CLAUSE 7.5.8("Dynamic Stability Test for Units with Castors")	-	200	-
CLAUSE 7.5.9(Strength Test for Wall Attachments)	-	300	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	500	-
Cl-6.1 (b)(Pencil hardness)	-	300	-
Cl-6.1 (c)(Resistance to wet heat)	-	500	-
Cl-6.1 (d)Cl-6.1 (d)(Resistance to dry heat)	-	500	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	500	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats Resistance to marking by cold oils and fats)	-	500	-
Cl-6.1 (g)(Adhesive performance)	-	500	-
Cl-6.2 (a) 1(Breaking load)	-	500	-
Cl-6.2 (a) 2(Elongation at break)	-	500	-
Cl-6.2 (a) 3(Tear strength)	-	500	-
Cl-6.2 (a) 4(Colour fastness to light)	-	500	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	500	-
Cl-6.2 (a) 7(Colour fastness to water)	-	500	-
Cl-6.2 (a) 8(Pilling resistance)	-	500	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	500	-
Cl-6.2 (a) 10(Seam slippage)	-	500	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	500	-
Cl-6.2 (a) 12(Abrasion resistance)	-	500	-
Cl-6.2 (a) 13(Bursting strength)	-	500	-
Cl-6.2 (a) 14(Resistance to cold)	-	500	-
Cl-6.2 (b) 1(Tear strength)	-	500	-
Cl-6.2 (b) 2(Flexing endurance)	-	500	-
Cl-6.2 (b) 3(Finish adhesion)	-	500	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	500	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	500	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	500	-
Cl-6.2 (b) 7(Water vapour permeability)	-	500	-
Cl-6.2 (b) 8(Colour fastness to water)	-	500	-
Cl-7.1(General)	-	300	-
Cl-7.2.1(Shelves)	-	300	-
Cl-7.2.2(Tops and Bottoms)	-	300	-
Cl-7.2.3(Strength of Clothes Rails and their Supports)	-	300	-
Cl-7.2.4(Strength of the Structure)	-	300	-
Cl-7.3.1(Pivoted Doors)	-	300	-
Cl-7.3.2(Sliding Doors and Horizontal Roll-fronts)	-	100	-
Cl-7.3.3(Flaps)	-	400	-
Cl-7.3.4(Vertical Roll-Fronts)	-	200	-
Cl-7.3.5(Extension Elements)	-	1500	-
Cl-7.3.6(Locking and Latching Mechanism Test)	-	100	-
Cl-7.3.7(Pull Force Test)	-	200	-
Cl-7.3.8(Top Load Ease Cycle Test)	-	400	-
Cl-7.3.9(Durability Test for Units with Seating Surfaces – Cyclic Impact)	-	400	-
Cl-7.3.10(Drop Test – Dynamic – for Units with Seat Surfaces)	-	400	-
Cl-7.4.1(Units Not Supported by the Floor)	-	200	-
Cl-7.4.2(Units Supported by the Floor)	-	200	-
Cl-7.5.1(General)	-	200	-
Cl-7.5.2(Doors, Extension Elements and Flaps Closed, All Storage Units Unloaded)	-	200	-
Cl-7.5.3(Opening Doors, Extension Elements and Flaps, All Storage Units Unloaded)	-	200	-
Cl-7.5.4(Doors, Extension Elements and Flaps Opened and Unlocked)	-	200	-
Cl-7.5.5(Doors, Extension Elements and Flaps Closed and Locked, All Storage Units Loaded)	-	200	-
Cl-7.5.6(Vertical Force Stability Test for Storage Units)	-	200	-
Cl-7.5.7(Stability Test for Pedestals/Storage Units with Seat Surfaces)	-	200	-
Cl-7.5.8(Dynamic Stability Test for Units with Castors)	-	200	-
Cl-7.5.9(Strength Test for Wall Attachments)	-	300	-
Cl-9(Marking)	-	400	-

-
included w.e.f 26.11.2025

5350

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

255000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	5000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	20000	-
7.2(Intended Use)	-	100000	-
7.3(Reasonably foreseeable misuse)	-	100000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	25000	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	5000	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	0	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	0	-
7.2(Intended Use)	-	0	-
7.3(Reasonably foreseeable misuse)	-	0	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

5351

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS/ISO 80601 : Part 2 : Sec 61 (2017)

Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment

Pulse Oximeter Equipment

820000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(Power and Current)	-	7500	₹5,20,000/- Excluding EMI/EMC tests, ₹8,20,000/- With EMI/EMC tests
201.5(Temperature, Humidity, Dimensions, Force)	-	35000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	7500	-
201.7(Legibility & Durability of markings)	-	2500	-
201.7.2.9.101(Ingress Protection)	-	2500	-
201.8(Current, Voltage, Energy, Dimensions, Impedance)	-	70000	-
201.8.3.101(Current, Voltage, Energy, Dimensions, Impedance)	-	70000	-
201.8.5.5.1(Voltage, Time)	-	70000	-
201.8.5.5.2(Energy)	-	70000	-
201.9(Mechanical dimensions, strength , torque, force)	-	70000	-
201.11(Temperature)	-	70000	-
201.11.6.5.101(Temperature)	-	70000	-
201.11.8.101(Power)	-	70000	-
201.11.8.101.1(Power)	-	70000	-
201.11.8.101.2(Temperature)	-	70000	-
201.11.8.101.3(Temperature)	-	70000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	15000	-
201.12.1.101, 201.12.1.101.1(SpO2 ACCURACY)	-	15000	-
201.12.1.101.2(SpO2 ACCURACY)	-	15000	-
201.12.1.101.3(SpO2 ACCURACY)	-	15000	-
201.12.1.101.4(SpO2 ACCURACY)	-	15000	-
201.12.1.102(SpO2 ACCURACY)	-	15000	-
201.12.1.103(SpO2 ACCURACY)	-	15000	-
201.13(Temperature, Voltage, Current)	-	50000	-
201.13.101(Temperature, Voltage, Current)	-	50000	-
201.15(Mechanical strength, Temperature, current)	-	52500	-
201.15.3.5.101.1(Shock and vibration)	-	52500	-
201.15.101(Shock and vibration)	-	52500	-
201.16(Leakage currents , dielectirc strength)	-	7500	-
208(Alarm system verification)	-	5000	-
208.6.1.2.101(Alarm system verification)	-	5000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	5000	-
201.12.1.104(Pulse rate ACCURACY)	-	5000	-
201.12.4(Protection against hazardous output)	-	5000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	300000	-
202(Electromagnetic disturbances – Requirements and tests)	-	300000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	15000	-
212(Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment)	-	15000	-
201.101(PULSE OXIMETER PROBES and PROBE CABLE EXTENDERS)	-	5000	-
201.102(Saturation pulse INFORMATION SIGNAL)	-	5000	-
201.103(FUNCTIONAL CONNECTION)	-	5000	-

19 Mar, 2029

-
Included w.e.f. 16.04.2026

5352

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	8000	-
6(FREEDOM FROM DEFECTS)	-	8000	-
8(DIMENSIONS AND TOLERANCES)	-	8000	-
10(MECHANICAL PROPERTIES)	-	8000	-
Cl. 9(Aluminium)	-	8000	-
Cl. 9(Copper)	-	8000	-
Cl. 9(Magnesium)	-	8000	-
Cl. 9(Silicon)	-	8000	-
Cl. 9(Iron)	-	8000	-
Cl. 9(Manganese)	-	8000	-
Cl. 9(Zinc)	-	8000	-
Cl. 9(Titanium and/or other grain refining elements)	-	8000	-
Cl. 9(Chromium)	-	8000	-
Cl. 9(Ti+V)	-	8000	-
Cl. 9(Cr+Mn)	-	8000	-
Clause-10(Tensile strength)	-	8000	-

08 May, 2028

-
Included w.e.f 02.07.2025

5353

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS/ISO 80601 : Part 2 : Sec 56 (2017)

Medical electrical equipment: Part 2 particular requirements for basic safety and essential performance: Sec 56 clinical thermometers for body temperature measurement

Clinical Thermometers for Body Temperature Measurement

875000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	10000	₹5,75,000/- Excluding EMI/EMC tests, ₹8,75,000/- With EMI/EMC tests
201.5(General requirements for testing of ME EQUIPMENT)	-	35000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	5000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	2500	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	75000	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	75000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	75000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	75000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	75000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	12500	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	75000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	5000	-
201.15(Construction of ME EQUIPMENT)	-	75000	-
201.16(ME SYSTEMS)	-	5000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	300000	-
201.101(Laboratory performance requirements)	-	5000	-
201.102(CLINICAL ACCURACY VALIDATION)	-	5000	-
201.103("PROBES, PROBE CABLE EXTENDERS and PROBE COVERS ")	-	5000	-
202(Electromagnetic disturbances — Requirements and tests)	-	300000	-
208("General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems ")	-	7500	-
212("Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment ")	-	4000	-

19 Mar, 2029

-
Included w.e.f. 16.04.2026

5354

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 2 (2024)

Vitreous China Sanitary Appliances âSpecification Part 2 Specific Requirements of Washdown Water Closets (Sixth Revision)

Pattern 1,2,3,4 and any other Pattern or size

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	200	-
Cl-4(PATTERNS)	-	50	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	200	-
Cl-6(CONSTRUCTIONS)	-	200	-
Cl-7(FINISH)	-	200	-
Cl-8.1(Toilet Paper Test)	-	400	-
Cl-8.2(Smudge Test)	-	400	-
Cl-8.3(Holding Capacity Test)	-	400	-
Cl-8.4.1(Single Ball Test)	-	400	-
Cl-8.4.2(Fifty Ball Test)	-	400	-
Cl-8.5(Load Bearing Test)	-	400	-
Cl-8.6(Saw Dust Test)	-	400	-
Cl-8.7(Splash Test)	-	400	-
Cl-10("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	200	-
As per Clause 3(General requirements: - Material and manufacture IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: - Application of Glazing IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: -Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finish as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Bit as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-Spots, blisters and pinholes as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-polishing marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes as per 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements - Minimum Thickness as per IS 2556 (Part 1))	-	100	-
As per Clause 3(General requirements - Warpage as per IS 2556 (Part 1))	-	100	-
As per Clause 3(General requirements - Crazing as per IS 2556 (Part 1))	-	1200	-
As per Clause 3(General requirements - Water Absorption as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Modulus of Rupture as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Chemical Resistance Test as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Resistance to Staining and Burning as per IS 2556 (Part 1))	-	1000	-
As per Clause 4(Patterns)	-	50	-
As per Clause 5 - Table 1 - i)(Height - A)	-	200	-
As per Clause 5 - Table 1 - ii)(Depth of water seal, Min - H)	-	200	-
As per Clause 5 - Table 1 - iii)(Width of water closet - J)	-	200	-
As per Clause 5 - Table 1 - iv)(Distance from centre of seat bolt hole to front of water closet - K)	-	200	-
As per Clause 5 - Table 1 - v)(Distance from centre of seat bolt hole to inside face of flush rim at back, Max - L)	-	200	-
As per Clause 5 - Table 1 - vi)(Distance between a vertical line from tip of back plate to inside face of flush rim at back, Max - O)	-	200	-
As per Clause 5 - Table 1 - vii)(Width of opening, Min - P)	-	200	-
As per Clause 5 - Table 1 - viii)(Length of opening, Min - Q)	-	200	-
As per Clause 5 - Table 1 - ix)(Overall length - S)	-	200	-
As per Clause 5 - Table 1 - x)(Trap inlet depth, Min - T)	-	200	-
As per Clause 5 - Table 1 - xi)(Water surface Back to front - W1)	-	200	-
As per Clause 5 - Table 1 - xi)(Water surface Side to side - W2)	-	200	-
As per Clause 5 and 6 - Table 2 - i)(Height of centre line of flush inlet floor level, (for P-trap only) - B)	-	200	-
As per Clause 5 and 6 - Table 2 - ii)(Height of centre line of outlet from floor level, (for P-trap only) - C1)	-	200	-
As per Clause 5 and 6 - Table 2 - iii)(Distance from end of trap to floor (for S-trap only) - C2)	-	200	-
As per Clause 5 and 6 - Table 2 - iv)(Internal diameter of outlet, Min - D)	-	200	-
As per Clause 5 and 6 - Table 2 - v)(External diameter of outlet - D1)	-	200	-
As per Clause 5 and 6 - Table 2 - vi)(Radius of free space (to be measured from the centre of the outlet, taken at a distance 40 mm from the end of the outlet), Min - D2/2)	-	200	-
As per Clause 5 and 6 - Table 2 - vii)(Internal diameter of inlet - E2)	-	200	-
As per Clause 5 and 6 - Table 2 - viii)(Depth of inlet F socket, Min - F)	-	200	-
As per Clause 5 and 6 - Table 2 - ix)(Distance between end of flush inlet socket and outside of the outlet - G)	-	200	-
As per Clause 5 and 6 - Table 2 - ix)(Distance between end of flush inlet socket and outside of the outlet - G1)	-	200	-
As per Clause 5 and 6 - Table 2 - x)(Distance between end of flush inlet socket and centre line of the outlet- G2)	-	200	-
As per Clause 5 and 6 - Table 2 - x)(Distance between end of flush inlet socket and centre line of the outlet - G3)	-	200	-
As per Clause 5 and 6 - Table 2 - xi)(Diameter of seat bolt hole - M)	-	200	-
As per Clause 5 and 6 - Table 2 - xii)(Distance between centre of seat bolt holes - N)	-	200	-
As per Clause 5 and 6 - Table 2 - xiii)(Length of grooved part of outlet, Min - R)	-	200	-
As per Clause 5 and 6 - Table 2 - xiv)(Length of straight part of outlet glazed and without groove - R1)	-	200	-
As per Clause 5 and 6 - Table 2 - xv)(Angle of outlet (for P-trap only) - ∅)	-	200	-
As per Clause 5 and 6 - Table 2 - xvi)(Distance between end of outlet and floor - X)	-	200	-
As per Clause 5 and 6 - Table 2 - xvii)(Length of outlet without grooves- Y)	-	200	-
As per Clause 5 and 6 - Table 2 - xviii)(Length of outlet extending to the floor - Y1)	-	200	-
As per Clause 6.1(CONSTRUCTION)	-	200	-
As per Clause 6.2(CONSTRUCTION)	-	200	-
Cl 6.3(CONSTRUCTIONS)	-	200	-
As per Clause 7(FINISH)	-	200	-
As per Clause 8.1(Flushing tests - Toilet Paper Test)	-	400	-
As per Clause 8.2(Flushing tests - Smudge Test)	-	400	-
As per Clause 8.3(Flushing tests - Holding Capacity Test)	-	400	-
As per Clause 8.4.1(Flushing tests - Single Ball Test)	-	400	-
As per Clause 8.4.2(Flushing tests - Fifty Ball Test)	-	400	-
As per Clause 8.5(Load Bearing Test)	-	400	-
As per Clause 8.6(Flushing tests - Saw Dust Test)	-	400	-
As per Clause 8.7(Flushing tests - Splash Test)	-	400	-
As per Clause 10(Additional requirements for water effeciency as per IS 17650 part 1)	-	200	-
Cl 4(PATTERNS)	-	50	-
(Cl.6) & Cl.6.1(CONSTRUCTIONS)	-	200	-
Cl 6.2(CONSTRUCTIONS)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.4(CONSTRUCTIONS)	-	200	-
Cl 6.4.1(CONSTRUCTIONS)	-	200	-
Cl 7(FINISH)	-	200	-
Cl 8.4 & 8.4.1(Ball test & single ball test:)	-	200	-
Cl 8.4.2(Fifty ball test :)	-	200	-
Cl 8.5(Load bearing test :)	-	400	-
Cl 8.6(Saw dust test :)	-	400	-
Cl 8.7(Splash test :)	-	400	-
(Cl. 6) of IS 2556 : 1 (2004)(Permissible blemishes of defects)	-	200	-
(Cl. 6) of IS 2556 : 1 (2004) Cl.7(Min thickness)	-	100	-
Cl-3(GENERAL REQUIREMENTS)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	200	-
Cl-6(CONSTRUCTIONS)	-	200	-
Cl-7(FINISH)	-	200	-
Cl-8.1(Toilet Paper Test)	-	400	-
Cl-8.2(Smudge Test)	-	400	-
Cl-8.3(Holding Capacity Test)	-	400	-
Cl-8.4.1(Single Ball Test)	-	400	-
Cl-8.4.2(Fifty Ball Test)	-	400	-
Cl-8.5(Load Bearing Test)	-	400	-
Cl-8.6(Saw Dust Test)	-	400	-
Cl-8.7(Splash Test)	-	400	-
Cl-10(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	200	-
Cl-10(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	200	-
Cl-11(Marking)	-	200	-
Cl-11(Marking)	-	200	-
As per Clause 6 - 6.3(CONSTRUCTION)	-	200	-
As per Clause 6.4(CONSTRUCTION)	-	200	-
Cl 8 & 8.1(FLUSHING TESTS , toilet paper test)	-	400	-
Cl 8.2(Smudge Test :)	-	400	-
Cl 8.3(Holding Capacity Test :)	-	400	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	200	-
Cl-3(GENERAL REQUIREMENTS)	-	200	-
Cl-4(PATTERNS)	-	50	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	200	-
Cl-6(CONSTRUCTIONS)	-	200	-
Cl-7(FINISH)	-	200	-
Cl-8.1(Toilet Paper Test)	-	400	-
Cl-8.2(Smudge Test)	-	400	-
Cl-8.3(Holding Capacity Test)	-	400	-
Cl-8.4.1(Single Ball Test)	-	400	-
Cl-8.4.2(Fifty Ball Test)	-	400	-
Cl-8.5(Load Bearing Test)	-	400	-
Cl-8.6(Saw Dust Test)	-	400	-
Cl-8.7(Splash Test)	-	400	-
Cl-10("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	200	-
As per Clause 3(General requirements: - Material and manufacture IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: - Application of Glazing IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements: -Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finish as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Bit as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-Spots, blisters and pinholes as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC pans, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of rims of WC pans, Squatting pans bidets and urinals-polishing marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes as per 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks as per IS 2556 (Part 1))	-	200	-
As per Clause 3(General requirements - Minimum Thickness as per IS 2556 (Part 1))	-	100	-
As per Clause 3(General requirements - Warpage as per IS 2556 (Part 1))	-	1200	-
As per Clause 3(General requirements - Crazing as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Water Absorption as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Modulus of Rupture as per IS 2556 (Part 1))	-	1500	-
As per Clause 3(General requirements - Chemical Resistance Test as per IS 2556 (Part 1))	-	1200	-
As per Clause 3(General requirements - Resistance to Staining and Burning as per IS 2556 (Part 1))	-	1000	-
As per Clause 4(Patterns)	-	50	-
As per Clause 5 - Table 1 - i)(Height - A)	-	200	-
As per Clause 5 - Table 1 - ii)(Depth of water seal, Min - H)	-	200	-
As per Clause 5 - Table 1 - iii)(Width of water closet - J)	-	200	-
As per Clause 5 - Table 1 - iv)(Distance from centre of seat bolt hole to front of water closet - K)	-	200	-
As per Clause 5 - Table 1 - v)(Distance from centre of seat bolt hole to inside face of flush rim at back, Max - L)	-	200	-
As per Clause 5 - Table 1 - vi)(Distance between a vertical line from tip of back plate to inside face of flush rim at back, Max - O)	-	200	-
As per Clause 5 - Table 1 - vii)(Width of opening, Min - P)	-	200	-
As per Clause 5 - Table 1 - viii)(Length of opening, Min - Q)	-	200	-
As per Clause 5 - Table 1 - ix)(Overall length - S)	-	200	-
As per Clause 5 - Table 1 - x)(Trap inlet depth, Min - T)	-	200	-
As per Clause 5 - Table 1 - xi)(Water surface Back to front - W1)	-	200	-
As per Clause 5 - Table 1 - xi)(Water surface Side to side - W2)	-	200	-
As per Clause 5 and 6 - Table 2 - i)(Height of centre line of flush inlet floor level, (for P-trap only) - B)	-	200	-
As per Clause 5 and 6 - Table 2 - ii)(Height of centre line of outlet from floor level, (for P-trap only) - C1)	-	200	-
As per Clause 5 and 6 - Table 2 - iii)(Distance from end of trap to floor (for S-trap only) - C2)	-	200	-
As per Clause 5 and 6 - Table 2 - iv)(Internal diameter of outlet, Min - D)	-	200	-
As per Clause 5 and 6 - Table 2 - v)(External diameter of outlet - D1)	-	200	-
As per Clause 5 and 6 - Table 2 - vi)(Radius of free space (to be measured from the centre of the outlet, taken at a distance 40 mm from the end of the outlet), Min - D2/2)	-	200	-
As per Clause 5 and 6 - Table 2 - vii)(Internal diameter of inlet - E2)	-	200	-
As per Clause 5 and 6 - Table 2 - viii)(Depth of inlet F socket, Min - F)	-	200	-
As per Clause 5 and 6 - Table 2 - ix)(Distance between end of flush inlet socket and outside of the outlet - G)	-	200	-
As per Clause 5 and 6 - Table 2 - ix)(Distance between end of flush inlet socket and outside of the outlet - G1)	-	200	-
As per Clause 5 and 6 - Table 2 - x)(Distance between end of flush inlet socket and centre line of the outlet- G2)	-	200	-
As per Clause 5 and 6 - Table 2 - x)(Distance between end of flush inlet socket and centre line of the outlet - G3)	-	200	-
As per Clause 5 and 6 - Table 2 - xi)(Diameter of seat bolt hole - M)	-	200	-
As per Clause 5 and 6 - Table 2 - xii)(Distance between centre of seat bolt holes - N)	-	200	-
As per Clause 5 and 6 - Table 2 - xiii)(Length of grooved part of outlet, Min - R)	-	200	-
As per Clause 5 and 6 - Table 2 - xiv)(Length of straight part of outlet glazed and without groove - R1)	-	200	-
As per Clause 5 and 6 - Table 2 - xv)(Angle of outlet (for P-trap only) - ∅)	-	200	-
As per Clause 5 and 6 - Table 2 - xvi)(Distance between end of outlet and floor - X)	-	200	-
As per Clause 5 and 6 - Table 2 - xvii)(Length of outlet without grooves- Y)	-	200	-
As per Clause 5 and 6 - Table 2 - xviii)(Length of outlet extending to the floor - Y1)	-	200	-
As per Clause 6.1(CONSTRUCTION)	-	200	-
As per Clause 6.2(CONSTRUCTION)	-	200	-
Cl 6.3(CONSTRUCTIONS)	-	200	-
As per Clause 7(FINISH)	-	200	-
As per Clause 8.1(Flushing tests - Toilet Paper Test)	-	400	-
As per Clause 8.2(Flushing tests - Smudge Test)	-	400	-
As per Clause 8.3(Flushing tests - Holding Capacity Test)	-	400	-
As per Clause 8.4.1(Flushing tests - Single Ball Test)	-	400	-
As per Clause 8.4.2(Flushing tests - Fifty Ball Test)	-	400	-
As per Clause 8.5(Load Bearing Test)	-	400	-
As per Clause 8.6(Flushing tests - Saw Dust Test)	-	400	-
As per Clause 8.7(Flushing tests - Splash Test)	-	400	-
As per Clause 10(Additional requirements for water effeciency as per IS 17650 part 1)	-	200	-
Cl 4(PATTERNS)	-	50	-
(Cl.6) & Cl.6.1(CONSTRUCTIONS)	-	200	-
Cl 6.2(CONSTRUCTIONS)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.3(Dimensions and constructions)	-	200	-
Cl 6.4(CONSTRUCTIONS)	-	200	-
Cl 6.4.1(CONSTRUCTIONS)	-	200	-
Cl 7(FINISH)	-	200	-
Cl 8.4 & 8.4.1(Ball test & single ball test:)	-	200	-
Cl 8.4.2(Fifty ball test :)	-	200	-
Cl 8.5(Load bearing test :)	-	400	-
Cl 8.6(Saw dust test :)	-	400	-
Cl 8.7(Splash test :)	-	400	-
(Cl. 6) of IS 2556 : 1 (2004)(Permissible blemishes of defects)	-	200	-
(Cl. 6) of IS 2556 : 1 (2004) Cl.7(Min thickness)	-	100	-
Cl-3(GENERAL REQUIREMENTS)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	200	-
Cl-6(CONSTRUCTIONS)	-	200	-
Cl-7(FINISH)	-	200	-
Cl-8.1(Toilet Paper Test)	-	400	-
Cl-8.2(Smudge Test)	-	400	-
Cl-8.3(Holding Capacity Test)	-	400	-
Cl-8.4.1(Single Ball Test)	-	400	-
Cl-8.4.2(Fifty Ball Test)	-	400	-
Cl-8.5(Load Bearing Test)	-	400	-
Cl-8.6(Saw Dust Test)	-	400	-
Cl-8.7(Splash Test)	-	400	-
Cl-10(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	200	-
Cl-10(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY)	-	200	-
Cl-11(Marking)	-	200	-
Cl-11(Marking)	-	200	-
As per Clause 6 - 6.3(CONSTRUCTION)	-	200	-
As per Clause 6.4(CONSTRUCTION)	-	200	-
Cl 8 & 8.1(FLUSHING TESTS , toilet paper test)	-	400	-
Cl 8.2(Smudge Test :)	-	400	-
Cl 8.3(Holding Capacity Test :)	-	400	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	200	-

07 Feb, 2030

-
Included w.e.f.03.07.2025

5355

Robust Testing Solutions Private Limited, Alwar

8173526

IS 12444 (2020)

Copper Wire Rods for Electrical Applications — Specification ( First Revision )

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimension)	-	1000	-
6.2.2(Ovality)	-	2000	-
7.0(Freedom from Defects)	-	1000	-
8.1(Tensile Strength)	-	10000	-
8.2(Surface Compression Test)	-	10000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	5000	-
7.2(Surface Oxide)	-	5000	-
5.1 Table-1(Bi)	-	15000	-
5.1 Table-1(Pb)	-	15000	-
5.1 Table-1(Ag)	-	15000	-
5.1 Table-1(O)	-	20000	-
5.1 Table-1(Te)	-	15000	-
5.1 Table-1(Se)	-	15000	-
5.1 Table-1(Se+Te+Bi)	-	15000	-
5.1 Table-1(Sb)	-	15000	-
5.1 Table-1(As)	-	15000	-
5.1 Table-1(Sn)	-	15000	-
5.1 Table-1(Fe)	-	15000	-
5.1 Table-1(Ni)	-	15000	-
5.1 Table-1(S)	-	15000	-
5.1 Table-1(Maximum Allowable Total Impurities)	-	15000	-
10.5(Microscopic Examination)	-	5000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	5000	-
7.2(Surface Oxide)	-	5000	-
10.5(Microscopic Examination)	-	5000	-
Cl-9.1, Table-4(Volume Resistivity)	-	5000	-
Cl-9.1, Table-4(Mass Resistivity)	-	5000	-
Cl-9.1, Table-4(Electrical Conductivity)	-	5000	-
9.2.1.1(Electrical Properties)	-	5000	-
9.2.1.2(Electrical Properties)	-	5000	-
9.2.1.3(Electrical Properties)	-	5000	-
13(Mechanical Strength)	-	5000	-
8.2.2(Calculated resistance)	-	5000	-
Cl-9.2.2(Electrical Properties)	-	0	-
7.2(Surface Oxide)	-	0	-
10.5(Microscopic Examination)	-	0	-

02 Aug, 2029

-
Included w.e.f 28.07.2025

5356

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	6000	-
10.1(Power input)	-	6000	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	6000	-
13.3(Electric Strength at operating temperature)	-	6000	-
14(Transient Over Voltages)	-	8000	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	7500	-
15.3(Humidity Test)	-	7500	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	6000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	6000	-
17(Over Load Protection of Transformers and associated circuits)	-	9000	-
18(Endurance Test requirements and tests)	-	14000	-
19(Abnormal Operation)	-	10000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	3000	-
22(Construction verification related test)	-	12500	-
23(General)	-	2000	-
24(Components)	-	2000	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	3000	-
27(Provision for earthing)	-	3000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	1500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
30.2(Needle Flame Test)	-	0	-

24 Sep, 2026

-
Included w.e.f. 21.08.2025 Exclusion "22 (Construction verification related test) 24 (Components)" "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

5357

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 204 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 204 electric water boilers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	3000	-
11(TEMPRATURE RISE)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	2000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

5358

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS/IEC 80601 : Part 2 : Sec 30 (2018)

Medical electrical equipment: Part 2 - 30 particular requirements for basic safety and essential performance of automated non - Invasive sphygmomanometers

Automated Non-Invasive Sphygmomanometers

990000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	45000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	45000	-
210(Requirements for the development of physiologic closed-loop controllers)	-	5000	-
206(Usability)	-	5000	-
202.8(Electromagnetic IMMUNITY requirements for ME EQUIPMENT and ME SYSTEMS)	-	50000	-
202(Electromagnetic disturbances – Requirements and tests)	-	300000	-
201.106(Clinical accuracy)	-	5000	-
201.105(Automatic cycling modes)	-	5000	-
201.103(Maximum inflating time)	-	5000	-
201.102(Connection tubing and CUFF connectors)	-	5000	-
201.101(Requirements for CUFFS)	-	5000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	300000	-
201.16(ME SYSTEMS)	-	7500	-
201.15(Construction of ME EQUIPMENT)	-	75000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	7500	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	75000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	15000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	75000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	75000	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	75000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	75000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	2500	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	7500	-
201.5(General requirements for testing ME EQUIPMENT)	-	45000	-
201.4(General)	-	5000	-

19 Mar, 2029

-
Included w.e.f. 16.04.2026

5359

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	2000	-
6(Classification)	-	2000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	0	-
10("Power Input & Current")	-	0	-
11(Temperature Rise/ Heating)	-	3000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	0	-
15(Moisture Resistance)	-	5000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	2000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
23(Internal Wiring)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	2000	-
30(Resistance to Heat & Fire)	-	2000	-
31(Resistance to Rusting)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

5360

BCH Electric Limited, Faridabad

8186026

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

Limit Switch, Foot Switch, Push Button, Control relay

1205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available

05 Jun, 2028

-
-

5361

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

L.D.-2.5,M.D.-10,H.D.-20, E.H.D.-35

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(General)	-	100	-
3(Type/Shape of Cover)	-	100	-
8(LIFTING HOOKS)	-	100	-
5.2 and Table 1(Dimensions of Frame - A)	-	100	-
5.2 and Table 1(Dimensions of Frame - B)	-	100	-
5.2 and Table 1(Dimensions of Frame - C)	-	100	-
5.2 and Table 1(Dimensions of Frame - D)	-	100	-
5.2 and Table 1(Dimensions of Frame - E)	-	100	-
5.2 and Table 1(Dimensions of Frame - F)	-	100	-
5.2(Dimensions of cover- Diameter)	-	100	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	100	-
5.2(Top surface ofthe frame and cover is in level)	-	100	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	100	-
5.2 and Fig 1(Clear cover to reinforcement)	-	200	-
5.2 and Fig 1(Distance of housing from the edge)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
9.3 and Table and Annex C(Load Test)	-	1000	-
Clause No. 6(Design)	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat))	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet))	-	200	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	200	-
Clause No. 8(Lifting Hooks (Diameter of MS rod))	-	200	-
Clause No. 8(Lifting Device)	-	200	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load)	-	2000	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load)	-	2000	-
Clause No. 9.3 Annex C(Permanent set of cover)	-	2000	-
Clause No. 9.3 Annex C(Cracks at bottom side of the cover )	-	100	-
Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel)	-	0	-
Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover)	-	0	-

26 Aug, 2027

-
-

5362

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

7560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	200	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	200	-
7 Table-3 ii b(Expansion by Autoclave)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 iv(Magnesia)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 vii(Chloride content)	-	560	-
6.1 Table-2 viii(Alkali content)	-	600	-

26 Aug, 2027

-
-

5363

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 712 (1984)

Specification for building limes (Third Revision)

Class-A/B/C/D/E/F

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4 ,Table 1(Chem reqd)	-	0	--
cl 4, Table 2(Physical reqd)	-	0	--
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	1000	--
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	500	--
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	1000	--
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	1000	-
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	500	--
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	500	--
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	200	--
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	250	--
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	250	--
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	500	--
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	500	-

26 Aug, 2027

-
-

5364

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade-1/Grade-2

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	500	-
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	2500	-
8.4(Physical requirments- Compressive strength)	-	3000	-
8.5(Thermal Conductivity)	-	10000	-
8.6( Drying Shrinkage )	-	5000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	1300	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1000	-
3.2 & 8.2(Indivisual Height)	-	500	-
3.2 & 8.2(Indivisual Width)	-	500	-
3.2 & 8.2(Indivisual Length)	-	500	-
8.6, 9.4 & 11.5(Grade)	-	200	-

26 Aug, 2027

-
-

5365

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

Grade A,B & C TYPE HOLLOW AND SOLIDCONCRETE BLOCKS

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	500	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	500	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	500	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	500	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	500	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	500	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	500	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	2000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	5400	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2000	-
15(Marking)	-	500	-

26 Aug, 2027

-
-

5366

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30,M-35,M-40,M-50,M-55

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.1.1 (General Quality)	-	200	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	200	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	200	-
Clause 7.1.3 (Colour and Texture)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	200	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	100	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	200	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	100	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	100	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	300	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	100	-
Clause 7.3, Annex G(Average Breaking Load)	-	100	-
Clause 7.3, Annex G(Individual Breaking Load)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	500	15% Discount for BIS Sample
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	100	15% Discount for BIS Sample
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	200	-
10(Marking)	-	100	-

26 Aug, 2027

-
-

5367

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 13450 : Part 2 : Sec 12 (2023)

Medical Electrical Equipment Part 2 Particular requirements for basic safety and essential performance Section 12 Critical care ventilators (First Revision)

Critical care ventilators

1270000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	10000	-
201.5(General requirements for testing of ME equipment)	-	45000	-
201.6(Classification of ME equipment and ME systems)	-	7500	-
201.7(ME equipment identification, marking and documents)	-	2500	-
201.8(Protection against electrical hazards from ME equipment)	-	115000	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	115000	-
201.10(Protection against unwanted and excessive radiation hazards)	-	115000	-
201.11(Protection against excessive temperatures and other hazards)	-	115000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	35000	-
201.13(Hazardous situations and fault conditions for ME equipment)	-	115000	-
201.14(Programmable electrical medical systems (PEMS))	-	7500	-
201.15(Construction of ME equipment)	-	100000	-
201.16(ME systems)	-	7500	-
201.17(Electromagnetic compatibility of ME equipment and ME systems)	-	300000	-
201.101(Gas connections)	-	50000	-
201.102(Requirements for the VBS and accessories)	-	50000	-
201.103(Spontaneous breathing during loss of power supply)	-	50000	-
201.104(Indication of duration of operation)	-	5000	-
201.105(Functional connection)	-	5000	-
201.106(Display loops)	-	5000	-
201.107(Timed ventilatory pause)	-	5000	-
202(Electromagnetic disturbances — Requirements and tests)	-	300000	-
206(Usability)	-	5000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	5000	-

19 Mar, 2029

-
Included w.e.f. 16.04.2026

5368

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse and Fine aggregate

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	200	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	200	-
5.4.2(a)( Aggregates Impact Value)	-	200	-
5.4.2(b)( Aggregates Impact Value)	-	200	-
5.4.3(a)( Aggregate Abrasion Value)	-	200	-
5.4.3(b)( Aggregate Abrasion Value)	-	200	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	200	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	200	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	200	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	200	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	200	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	200	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	200	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	200	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	200	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	200	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	200	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	200	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	200	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	200	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	200	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	200	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	200	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	200	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	200	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	200	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	200	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	200	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	200	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	200	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	200	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	200	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	200	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	200	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	200	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	200	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	200	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	200	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	200	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	200	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	200	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	200	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	200	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	200	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	200	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	200	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	200	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	200	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	200	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	200	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	200	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	200	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	200	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	200	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	200	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	100	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	200	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	200	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	200	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	200	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	200	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	200	-
5.3(Elongation Index)	-	200	-
5.3(Flakiness Index)	-	200	-
7.2(Bulk Density loose)	-	200	-
7.2(Bulk Density Rodded)	-	200	-
5.5(Soundness By Magnesium Sulphate)	-	200	-
7.2(Bulking Of Fine Aggregate)	-	200	-

26 Aug, 2027

-
-

5369

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	700	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	700	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	0	0
5.4.2-IS: 3025(P-11)(Ph)	-	500	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	500	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	0	0
Cl 5.4 Table 1 (i)(Organic Solids)	-	0	0

26 Aug, 2027

-
-

5370

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4351 (2024)

Steel Frames for Doors - Specification (Third Revision)

Profile A, B, C, D & E

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5, Table-1 (i)(Mild steel sheet (cold rolled))	-	25000		-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number