BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5371

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 7898 (2024)

Manually Operated Chaff Cutter - Specification and Test Code(Third Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1(Material)	-	17500		-

-
-

5372

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Group BIa/BIb/BIIa/BIIb/BIII

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 table 5, i a (Length-IS 13630(pt-1))	-	200	-
6 table 5,i a (width-IS 13630(pt-1))	-	200	-
6 table 5, i b (Thickness- IS 13630(pt-1))	-	200	-
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	-
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	2500	-
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	-
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	1500	-
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	1200	-
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1000	-
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1000	-
6 table 6, i a (Length-IS 13630(pt-1))	-	200	-
6 table 6, i a (width-IS 13630(pt-1))	-	200	-
6 table 6, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	2500	-
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1500	-
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1500	-
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 7, i a (Length-IS 13630(pt-1))	-	200	-
6 table 7, i a (width-IS 13630(pt-1))	-	200	-
6 table 7, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	-
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1500	-
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1500	-
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 8, i a (Length-IS 13630(pt-1))	-	200	-
6 table 8, i a (width-IS 13630(pt-1))	-	200	-
6 table 8, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	1500	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1000	-
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	1200	-
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 9, i a (Length-IS 13630(pt-1))	-	200	-
6 table 9, i a (width-IS 13630(pt-1))	-	200	-
6 table 9, i b (Thickness-IS 13630(pt-1))	-	200	-
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	1000	-
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	1000	-
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	200	-
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	2500	-
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	500	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	2000	-
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	1500	-
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	1500	-
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	4000	-
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	2000	-
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 9, ii q(Bulk Density-)	-	1000	-
6 table 9, iii a(Resistance to staining )	-	1200	-
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6.0, Table 5 - 9 & SI No. - 1E(3)(Warpage)	-	200	-
6.0, Table 5 - 9 & SI No. - 1E(2)(Edge Curveture)	-	200	-
CLAUSE NO. 5.2(Shapes and Sizes)	-	200	-

26 Aug, 2027

-
-

5373

HT Product Services Private Limited, Noida

8175006

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-

03 Dec, 2026

-
Included w.e.f.18.08.2025

5374

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-
Cl.5.3.4(Permanency of Pigments - Annex D of IS 18800)	-	30000	-
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-
5.1.1(Description)	-	30000	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	30000	-
5.1.3(Wall Thickness)	-	30000	-
5.1.4(Capacity)	-	30000	-
5.2(Mechanical Requirements)	-	30000	-
5.3.1(Leakage Test)	-	30000	-
5.3.2(Drop Test)	-	30000	-
5.3.3(Compressive Deformation Resistance)	-	30000	-
5.3.4(Permanency of Pigments of Printed Container)	-	30000	-
Cl.5.3.4(Permanency of Pigments - Annex D of IS 18800)	-	30000	-

13 May, 2028

-
Included w.e.f 03.07.2025

5375

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

All Type

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	12500	-
Cl-5(Manufacturer)	-	12500	-
Cl-6(Aluminium for use as matrix)	-	12500	-
Cl-6(Top-surface of the aluminium matrix)	-	12500	-
Cl-6(Bottom-surface of the aluminium matrix)	-	12500	-
Cl-7.1.1(Tensile properties)	-	12500	-
Cl-7.1.1(Apparent Yield Strength)	-	12500	-
Cl-7.1.1(Tensile Strength Mpa,)	-	12500	-
Cl-7.1.2(Test Specimen)	-	12500	-
Cl-7.1.3(Test Parameters)	-	12500	-
Cl-7.2.1(Bond strength of Tri-Ply)	-	12500	-
Cl-7.2.2(Sample Preparation and Test Specimen)	-	12500	-
Cl-7.2.3(Test Apparatus)	-	12500	-
Cl-7.2.4(Procedure)	-	12500	-
Cl-8.1(Sample of suitable size)	-	12500	-
Cl-8.2(specimen for peel strength)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	12500	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	12500	-
Cl-9.1(Thickness)	-	12500	-
Cl-9.2(Diameter)	-	12500	-
Cl-9.3(Flatness)	-	12500	-
Cl-10(surface finish)	-	12500	-
Cl-11(Workmanship, finish and appearance)	-	12500	-
Cl-14(Marking)	-	12500	-

02 Jun, 2027

-
Included w.e.f.29.07.2025

5376

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	2500	-
19(ABNORMAL OPERATION)	-	2500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	500	-
24(Components)	-	1000	-
4(General requirements)	-	500	-
5(General Conditions of tests)	-	500	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	40000 and 20% Discount for BIS

-
Included w.e.f 16.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 22.32 Oxygen bomb for rubber material

5377

CIPET, Hyderabad

6111634

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Emitters

3525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	0	-
Cl-5.2(Emitter Ends)	-	0	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.1(Construction and Workmanship)	-	300.0	25% DISCOUNT FOR BIS
Cl-7.2(Flow Paths in Emitter)	-	300.0	25% DISCOUNT FOR BIS
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000.0	25% DISCOUNT FOR BIS
Cl-7.4(Emitter Pull-Out)	-	500.0	25% DISCOUNT FOR BIS
Cl-7.4.1(In-Line Emitters)	-	500.0	25% DISCOUNT FOR BIS
Cl-7.4.2(On-Line Emitters)	-	500.0	25% DISCOUNT FOR BIS
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	25% DISCOUNT FOR BIS
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000.0	25% DISCOUNT FOR BIS
Cl-8.1.3(Determination of Emitter Exponent)	-	600.0	25% DISCOUNT FOR BIS
Cl-9(Marking)	-	500.0	25% DISCOUNT FOR BIS

23 Feb, 2027

-
Included w.e.f 28.07.2025

5378

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3748 (2022)

Tool Steels - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Shape, dimensions and tolerances)	-	4500	For dimensional and other qualitative test
7.2(Chemical Composition)	-	5000	For chemical test
7.2(Carbon)	-	5000	For chemical test
7.2(Silicon)	-	5000	For chemical test
7.2(Manganese)	-	4999.98	For chemical test
7.2(Nickel)	-	5000	For chemical test
7.2(Chromium)	-	5000	For chemical test
7.2(Molybdenum)	-	5000	For chemical test
7.2(Sulphur)	-	5000	For chemical test
7.2(Phosphorus)	-	5000	For chemical test
7.2(Nitrogen)	-	5000	For chemical test
7.2(Copper)	-	5000	For chemical test
7.2(Aluminium)	-	5000	For chemical test
7.2(Titanium)	-	5000	For chemical test
7.2(Niobium)	-	5000	For chemical test
7.2(Cerium)	-	5000	For chemical test
7.2(Tantalum)	-	5000	For chemical test
7.2(Cobalt)	-	5000	For chemical test
7.2(Tungsten)	-	5000	For chemical test
7.2(Vanadium)	-	5000	For chemical test
7.3(Surface Quality)	-	4499.98	For dimensional and other qualitative test
7.4(Shapes, dimensions and tolerances)	-	4500	For dimensional and other qualitative test
7.2(Hardness Test)	-	3000	For hardness test
Annex B.3(Verification of Minimum Hardness in Hardening Test)	-	3000	For hardness test
Annex B.7(Non-Destructive Test)	-	4500	For dimensional and other qualitative test
As per Clause 7.2, Table 2 to 9(Carbon)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Silicon)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Manganese)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Chromium)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Sulphur)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(phosphorus)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Cobalt)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Molybdenum)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(vanadium)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Tunsten)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Nickel)	-	5000	For chemical test
As per Clause 7.2, Table 2 to 9(Nitrogen)	-	5000	For chemical test
4.1(Classification)	-	4500	For dimensional and other qualitative test
4.2(Designation)	-	4500	For dimensional and other qualitative test
6.2.1(General)	-	4500	For dimensional and other qualitative test
6.2.2(Heat-treatment condition)	-	4500	For dimensional and other qualitative test
6.2.3(Surface Condition)	-	4500	For dimensional and other qualitative test
7.1(General requirements)	-	4500	For dimensional and other qualitative test
7.2(Chemical composition and mechanical properties)	-	5000	For chemical test
7.3(Surface quality)	-	4500	For dimensional and other qualitative test
7.4(Shape, dimensions and tolerances)	-	4499.99	For dimensional and other qualitative test
9(Marking)	-	4499.98	For dimensional and other qualitative test
11.1(Product diameter or thickness ≥ 15 mm)	-	4500	For dimensional and other qualitative test
11.2(Product diameter or thickness < 15 mm)	-	4500	For dimensional and other qualitative test

-
Included w.e.f.30.06.2025

5379

BIS, Central Laboratory (CL)

None

IS 2556 : Part 2 (2024)

Vitreous China Sanitary Appliances âSpecification Part 2 Specific Requirements of Washdown Water Closets (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3 (GENERAL REQUIREMENTS)	-
Cl-5 (DIMENSIONS AND TOLERANCES)	-
Cl-6 (CONSTRUCTIONS)	-
As per Clause 5 - Table 1 - i) (Height - A)	-
As per Clause 5 - Table 1 - ii) (Depth of water seal, Min - H)	-
As per Clause 5 - Table 1 - iii) (Width of water closet - J)	-
As per Clause 5 - Table 1 - iv) (Distance from centre of seat bolt hole to front of water closet - K)	-
As per Clause 5 - Table 1 - v) (Distance from centre of seat bolt hole to inside face of flush rim at back, Max - L)	-
As per Clause 5 - Table 1 - vi) (Distance between a vertical line from tip of back plate to inside face of flush rim at back, Max - O)	-
As per Clause 5 - Table 1 - vii) (Width of opening, Min - P)	-
As per Clause 5 - Table 1 - viii) (Length of opening, Min - Q)	-
As per Clause 5 - Table 1 - ix) (Overall length - S)	-
As per Clause 5 - Table 1 - x) (Trap inlet depth, Min - T)	-
As per Clause 5 - Table 1 - xi) (Water surface Back to front - W1)	-

-
-

5380

BIS, Central Laboratory (CL)

None

IS 251 (2024)

SODA ASH, TECHNICAL â SPECIFICATION (fifth revision)

Technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 ("Description ( IS 251 : 2024 )")	-
4.2 ("Bulk Density ( IS 251 : 2024 )")	-
4.3 ("Volatile Matter Content ( IS 251 : 2024 )")	-
4.4 ("Sieve Analysis of Dense Grade Soda Ash ( IS 251 : 2024 )")	-
4.4.1 ("Material retained on 1.70 mm IS Sieve ( IS 251 : 2024 )")	-
4.4.1 ("Material passing through 75 μm IS Sieve ( IS 251 : 2024 )")	-
4.5 Table 1 (i) ("Total alkalinity (as Na₂CO₃) ( IS 251 : 2024 )")	-
4.5 Table 1 (ii) ("Matter insoluble in water ( IS 251 : 2024 )")	-
4.5 Table 1 (iii) ("Sulphate (Na₂SO₄) ( IS 251 : 2024 )")	-
4.5 Table 1 (iv) ("Chloride (as NaCl) ( IS 251 : 2024 )")	-
4.5 Table 1 (5) ("Iron (as Fe₂O₃) ( IS 251 : 2024 )")	-

-
-

5381

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

ALL

123780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	2500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	2000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	3000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1500	-
IS 191:2007 & IS 440(Copper purity test)	-	2500	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	1500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	2500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	2000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	750	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	750	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	1500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3500	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	20000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	2500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	1500	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	3000	-
IS 191:2007 & IS 440(Copper purity test)	-	3000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	750	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	750	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	3000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	1500	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	3500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	750	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1500	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5500	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	-
IS 191:2007 & IS 440(Copper purity test)	-	22500	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	1500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	3500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	1500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	3500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3500	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	30000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	2500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3500	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	5500	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2500	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1500	-

26 Jul, 2027

-
Included w.e.f. 01.09.2025

5382

Samridhi Test House Pvt. Ltd.

8184706

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

Safety glass - Specification: Part 2 for road transport

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	4900	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.1(Light Transmittance)	-	4700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.1(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.2(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.1(Resistance to Abrasion)	-	1800	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.1(Resistance to Abrasion)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.2(Resistance to Abrasion)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.1.2.3.2(Resistance to Abrasion)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.1(Resistance to Temperature Changes)	-	3400	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.2(a) Resistance to Fire)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.2.2(b) Resistance to Fire)	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.1 (Resistance to Radiation)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.2(Resistance to High Temperature)	-	2000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.1(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.2(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.2(Resistance to Humidity)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.3.3.3(Resistance to Humidity)	-	6500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.1(Optical Distortion)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.1.3 (Optical Distortion)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.2.3(Secondary image separation test)	-	5700	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.1(Head-form Test (Location of crack))	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	7000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.3.1(Head-form Test)	-	7200	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.3.2(Head-form Test)	-	7200	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.4(2.260 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.1(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.2(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.3(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5.4(227 g Ball)	-	5000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.1(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.4(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5.1(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.1.5.2(Fragmentation Test)	-	4000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.1.2(227 g ball test)	-	1900	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.1(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.2(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.2.1.3(227 g ball test)	-	600	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	5500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.2( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.2.3( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-a( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-1( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-2( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.5.3.2.3-b-3( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.1.7( Head-form Test)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.1.8( Head-form Test-The HIC value )	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.4-a(Mechanical Strength Test — 227g Ball)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.4-b(Mechanical Strength Test — 227g Ball)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.2.5(Mechanical Strength Test — 227g Ball test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.3.3(Flexibility and Fold Test)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.4.4-a(Weathering)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.4.4-b(Weathering)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.5.3-a(Cross-cut)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.6.5.3-b-1(Cross-cut)	-	9000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.1.1(227 g Ball Test at 20 ± 5°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.2.1(227g Ball Test at –18° ± 2°C)	-	6000	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.3.1(Flexibility Test and Fold Test)	-	8500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.7.3.1(Flexibility Test and Fold Test)	-	8500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.5(227 g Ball test)	-	7500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 3.7(Wind screen and Panes)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 4.1(Wind screen and Panes)	-	23500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 5.8.2(Wind screen)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
As per Clause 5.8.3(Wind screen)	-	9500	Toughened Glass for panes: - 11,000/- Laminated safety glass for panes: - 75,000/- Laminated safety glass for windscreen: - 87,000/- Toughened glass for windscreen: - 15,000/- Plastic glazing: - 139,000/-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-
5.4.3.1(Head-form Test (Location of crack))	-	0	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	0	-
5.4.5(227 g Ball test)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
As per Clause 5.8.2(Wind screen)	-	0	-
As per Clause 5.8.3(Wind screen)	-	0	-

-
Included w.e.f 28.07.2025

5383

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	2000	-
4(GENERAL NOTES ON TESTS)	-	2000	-
5(RATING)	-	2000	-
6(CLASSIFICATION)	-	2000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION)	-	2000	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
101.1(Type Tests)	-	2000	-
101.2(Acceptance Tests)	-	2000	-
101.3(Routine Tests)	-	2000	-
3(GENERAL REQUIREMENT)	-	-	-
4(GENERAL NOTES ON TESTS)	-	-	-
5(RATING)	-	-	-
6(CLASSIFICATION)	-	-	-
7(MARKING)	-	-	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-	-
10(INPUT AND CURRENT)	-	-	-
11(HEATING)	-	-	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	-	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	-	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	-	-
15(MOISTURE RESISTANCE)	-	-	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-	-
17(OVERLOAD PROTECTION)	-	-	-
18(ENDURANCE )	-	-	-
19(ABNORMAL OPERATION)	-	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-	-
21(MECHANICAL STRENGTH)	-	-	-
22(CONSTRUCTION)	-	-	-
23(INTERNAL WIRING)	-	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-	-
27(PROVISION FOR EARTHING)	-	-	-
28(SCREWS AND CONNECTIONS)	-	-	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	-	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	-	-
31(RESISTANCE TO RUSTING)	-	-	-
101.1(Type Tests)	-	-	-
101.2(Acceptance Tests)	-	-	-
101.3(Routine Tests)	-	-	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7(EMI/EMC) 32 (Radiation, toxicity and similar hazards)

5384

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facilty Not available
Cl-5.1 (a)(Pigment)	-	350	-
Cl-5.1 (b)(Driers)	-	0	Facility for Identification of type of driers not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	900	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facilty Not available
Cl-5.2(Material)	-	0	Facilty Not available
Cl-5.3(Compatibility with Thinner)	-	150	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facilty Not available
Cl-5.5(Lead Restriction)	-	400	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	150	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	200	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	200	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	400	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	150	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	250	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	200	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	150	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	200	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	200	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	400	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	400	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	1000	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	500	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	500	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	200	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	200	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	350	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	250	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facility Not available
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	Facility Not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facility Not available
Cl-5.2(Material)	-	0	Facility Not available
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facility Not available
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	Facility Not available
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	Facility Not available
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	Facility Not available
Cl-5.2(Material)	-	0	Facility Not available
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	Facility Not available
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	( FOR KEEPING PROPERTIES THE TEST CHARGES WILL BE 500 )
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-
Cl-4(The smell of the material shall not be objectionable during application)	-	0	-
Cl-5.1 (a)(Pigment)	-	0	-
Cl-5.1 (b)(Driers)	-	0	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	0	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	0	-
Cl-5.1.1 (c)(Suitable extenders)	-	0	-
Cl-5.2(Material)	-	0	-
Cl-5.3(Compatibility with Thinner)	-	0	-
Cl-5.4(Freedom from Objectionable Impurities)	-	0	-
Cl-5.5(Lead Restriction)	-	0	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	0	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	0	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	0	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	0	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	0	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	0	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	0	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	0	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	0	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	0	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	0	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	0	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	0	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	0	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	0	-
Cl-5.7, Table-2 (i)(Consistency)	-	0	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	0	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	0	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2025 Exclusion: "Cl-4 (The smell of the material shall not be objectionable during application) Cl-5.1.2 (volatile vehicle) Cl-5.4 (Freedom from Objectionable Impurities) "

5385

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 13450 : PART 2 : SEC 4 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 4 cardiac defibrillators (First Revision)

Cardiac Defibrillators

1090000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	10000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	45000	-
201.6(Classification Of ME equipment and ME systems)	-	7500	-
201.7(ME EQUIPMENT identification, marking and documents)	-	2500	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	75000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	75000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	75000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	75000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	20000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	75000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	7500	-
201.15(Construction of ME EQUIPMENT)	-	90000	-
201.16(ME SYSTEMS)	-	7500	-
201.17(Electromagnetic compatibility of ME equipment and ME systems)	-	300000	Facility for EMI/EMC available under 1668 (DIV-II) Location
202(Electromagnetic compatibility-Requirement and tests)	-	300000	Facility for EMI/EMC available under 1668 (DIV-II) Location

19 Mar, 2029

-
Included w.e.f. 18.08.2025

5386

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.4(Marking and Instructions)	-	500	-
Cl.7.5(Marking and Instructions)	-	500	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.101(Marking and Instructions)	-	500	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2200	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2200	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	1500	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	2500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	2500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2200	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2200	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	2000	-
Cl.18 (Endurance. )	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.101(Abnormal Operation.)	-	2000	-
Cl.19.102(Abnormal Operation.)	-	2000	-
Cl.19.103(Abnormal Operation.)	-	2000	-
Cl.19.104(Abnormal Operation.)	-	2000	-
Cl.19.105(Abnormal Operation.)	-	2000	-
Cl.19.106(Abnormal Operation.)	-	2000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.107(Abnormal Operation.)	-	2000	-
Cl.19.108(Abnormal Operation.)	-	2000	-
Cl.19.109(Abnormal Operation.)	-	2000	-
Cl.19.110(Abnormal Operation.)	-	2000	-
Cl.19.111(Abnormal Operation.)	-	2000	-
Cl.19.112(Abnormal Operation.)	-	2000	-
Cl.19.113(Abnormal Operation.)	-	2000	-
Cl.19.114(Abnormal Operation.)	-	2000	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	1500	-
Cl.21.101 (Mechanical Strength.)	-	1500	-
Cl.21.102(Mechanical Strength.)	-	1500	-
Cl.21.103(Mechanical Strength.)	-	1500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.11(Construction)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	2000	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	1500	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	1500	-
C.23.7 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
C.24.1.4(Component)	-	1000	-
C.24.2 of 302-1:2008(Component)	-	1000	-
Cl.24.10(Component)	-	1000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	1000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	1500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1500	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	1500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	1500	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	1500	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	1500	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	1500	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	1500	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	1500	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	1500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1500	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	1500	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	1500	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	1500	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	1500	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	1500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	1500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	1500	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	1500	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	1500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	1500	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	1500	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	1500	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	1500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	1500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	1500	-
Cl.24 of IS:302-2-30:2007(Component)	-	1000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	1000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	2000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	2000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	2000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	2000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	2000.42	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	1500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	1500	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	1500	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	1500	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	1500	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	1500	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	1500	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	1500	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	1500	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	1500	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	1500	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	1500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	1500	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	1500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	1500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	1500	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	1500	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	500	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	500	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	500	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	500	-
19.11.4.1(Electrostatic discharges)	-	2500	-
19.11.4.3(Fast transient bursts)	-	2500	-
19.11.4.4(Surge immunity test)	-	2500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2500	-
19.11.4.7(Harmonics)	-	2500	-

15 Oct, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.2(Radiated fields), Cl 19.11.4.5(Injected Current)

5387

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Moisture Movement)	-	1500	-
8.6(Drying shrinkage)	-	3500	-
8.5, Table 1(Water Absorption)	-	2000	-
8.4, Table 1(Compressive strength)	-	3500	-
8.3(Block Density)	-	1500	-
3.2.5(Thickness of Web)	-	3000	For dimensional and other qualitative test
3.2.5(Face Shell Thickness)	-	3000	For dimensional and other qualitative test
3.2(Width)	-	3000	For dimensional and other qualitative test
3.2(Height)	-	3000	For dimensional and other qualitative test
3.2(Length)	-	3000	For dimensional and other qualitative test
8.1(General)	-	3000	For dimensional and other qualitative test
8.2(Deimension (Length))	-	3000	For dimensional and other qualitative test
8.2(Deimension (Height))	-	3000	For dimensional and other qualitative test
8.2(Deimension (Width))	-	3000	For dimensional and other qualitative test
8.3(Block Density)	-	1500	For block density test
8.4(Compressive Strength)	-	3500	For compressive strength test
8.5(Water Absorption)	-	2000	For water absorption test
8.6(Drying Shrinkage)	-	3500	For drying shrinkage test
8.7(Moisture Movement)	-	1500	For moisture movement test

-
Included w.e.f.30.06.2025

5388

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	3000	For dimensional and other qualitative test
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	3000	For dimensional and other qualitative test
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	3000	For dimensional and other qualitative test
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	3000	For dimensional and other qualitative test
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	3000	For dimensional and other qualitative test
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	3000	For dimensional and other qualitative test
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	1500	For block density test
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	3500	For compressive strength test
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2000	For water absorption test
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	3500	For drying shrinkage test
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	1500	For moisture movement test
15(Marking)	-	3000	For dimensional and other qualitative test

-
Included w.e.f.30.06.2025

5389

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General Conditions for the tests)	-	0	-
Cl-6(Classification)	-	0	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	20000	-
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1000	-
Cl-10.4(Idli Batter)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-
Cl-19.11.4.1(Electrostatic discharges)	-	5000	if applicable (If EMI/EMC (Cl.19.11.4.1 to Cl.19.11.4.7) testing is applicable then Rs. 55000 will be charged extra)
Cl-19.11.4.2(Radiated fields)	-	20000	if applicable
Cl-19.11.4.3(Fast transient bursts)	-	5000	if applicable
Cl-19.11.4.4(Surge immunity test)	-	5000	if applicable
Cl-19.11.4.5(Immunity to conducted discharges)	-	10000	if applicable
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	if applicable
Cl-19.11.4.7(Harmonics)	-	5000	if applicable

20 Jun, 2028

-
Included w.e.f 28.07.2025 Exclusion: Cl 22.32 (Construction) Rubber parts oxygen bomb test, Cl 24 (Components) Components testing

5390

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	1500	-
Cl-6.2(Design)	-	150	-
Cl-6.3(Size and Fitting)	-	200	-
Cl-6.4(Height of Upper)	-	200	-
Cl-6.5.1(Whole Footwear-Construction)	-	200	-
Cl-6.5.2(Whole Footwear-Ergonomic Feature)	-	500	-
Cl-6.5.3(Whole Footwear-Upper – Outsole Bond Strength)	-	800	-
Cl-6.5.4(Whole Footwear- Slip Resistance)	-	1500	-
Cl-6.5.5(Whole Footwear- Resistance to Fuel Oil)	-	2000	-
Cl-6.5.6(Whole Footwear- Impact Resistance)	-	1200	-
Cl-6.5.7(Whole Footwear- Compression Resistance)	-	1200	-
Cl-6.5.8(Whole Footwear- Resistance to Corrosion)	-	2000	-
Cl-6.6.2(Upper- Material)	-	200	-
Cl-6.6.3(Upper-Tear Strength)	-	800	-
Cl-6.6.4(Upper- Tensile strength)	-	800	-
Cl-6.6.5(Upper- Water Vapour Permeability and Coefficient)	-	1000	-
Cl-6.7.1(Vamp and quarter lining-Material)	-	200	-
Cl-6.7.2(Vamp and quarter lining-Tear strength)	-	800	-
Cl-6.7.3(Vamp and quarter lining-Abrasion resistance)	-	1200	-
Cl-6.7.4(Vamp and quarter lining-Water vapour permeability and coefficient)	-	1000	-
Cl-6.8(Toecaps -Whole toecap)	-	3000	-
Cl-6.9.1(Insole- Material)	-	200	-
Cl-6.9.2(Insole-Thickness)	-	200	-
Cl-6.9.3(Insole- Abrasion resistance)	-	600	-
Cl-6.9.4(Insole- Water absorption and desorption)	-	1000	-
Cl-6.10(Insocks-Thickness)	-	200	-
Cl-6.10.1(Insocks-Material)	-	200	-
Cl-6.10.2(Insocks-Abrasion resistance)	-	1200	-
Cl-6.10.3(Insocks-Water absorption and desorption)	-	1000	-
Cl-6.11(Stiffener)	-	3000	-
Cl-6.12(Tongue -Material)	-	800	-
Cl-6.13(Closing thread-- Properties)	-	1000	-
Cl-6.14.1(Outsole-Material)	-	200	-
Cl-6.14.2, 6.14.3 & 6.14.4(Outsole-Thickness, cleat area and cleat height)	-	200	-
Cl-6.14.5(Outsole-Tear strength)	-	800	-
Cl-6.14.6(Outsole-Abrasion resistance)	-	1000	-
Cl-6.14.7(Outsole-Flexing resistance)	-	1000	-
Cl-6.14.8(Outsole-Interlayer bond strength)	-	800	-
Cl-6.15.1(Laces-Material)	-	200	-
Cl-6.15.2(Laces-Colour Fastness)	-	1000	-
Cl-6.15.3(Laces-Abrasion Resistance)	-	800	-
Cl-6.15.4(Laces-Breaking load)	-	800	-
Cl-7.1, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	Chemical package charges- 25000
Cl-7.2(PVC outsole)	-	3000	-
Cl-8.3(Cold insulation of Sole)	-	1000	-
Cl-8.4(Heat insulation of Sole)	-	1000	-
Cl-10(Marking)	-	200	-
cL-7.1, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1 Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (x)(pH)	-	800	-
Cl-7.1, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-7.1, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-

-
Included w.e.f. 18.08.2025

5391

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 16218 (2014)

Forks - Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	15000	-
3.2 (i)(Brass as parent material)	-	15000	-
3.2(ii)(Brass plated with pure silver)	-	15000	-
3.3(Plastic handle)	-	15000	-
4(Shapes and Dimensions)	-	15000	-
5(Manufacture)	-	15000	-
6.1(Workmanship)	-	15000	-
6.2(Finish)	-	15000	-
9(Marking)	-	15000	-
10(Packing)	-	15000	-

13 May, 2028

-
Included w.e.f 03.07.2025

5392

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 16286 (2014)

Spoons - Specification

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	15000	-
3.2 (i)(Brass as parent material)	-	15000	-
3.2(ii)(Brass plated with pure silver)	-	15000	-
3.3(Plastic handle)	-	15000	-
4(Shapes and Dimensions)	-	15000	-
5.1(Manufacture)	-	15000	-
5.2(Workmanship)	-	15000	-
5.3(Finish)	-	15000	-
8(Marking)	-	15000	-
9(Packing)	-	15000	-
Cl-6.1(Staining Test)	-	15000	-
Cl-6.2(Bending Test)	-	15000	-
Cl-6.3(Load Test)	-	15000	-
Cl-6.4.1(Boiling)	-	15000	-
Cl-6.4.2(Impact)	-	15000	-
Cl-6.4.3(Staining)	-	15000	-

13 May, 2028

-
Included w.e.f 03.07.2025

5393

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

ALL

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	14900	-
Cl-6.1, Table-1(Fe)	-	14900	-
Cl-6.1, Table-1(Cu)	-	14900	-
Cl-6.1, Table-1(Mn)	-	14900	-
Cl-6.1, Table-1(Mg)	-	14900	-
Cl-6.1, Table-1(Cr)	-	14900	-
Cl-6.1, Table-1(Ni)	-	14900	-
Cl-6.1, Table-1(Zn)	-	14900	-
Cl-6.1, Table-1(Pb)	-	14900	-
Cl-6.1, Table-1(Sn)	-	14900	-
Cl-6.1, Table-1(Ti)	-	14900	-
Cl-6.1, Table-1(Others elements Each)	-	14900	-
Cl-6.1, Table-1(Others elements Total)	-	14900	-
Cl-6.1, Table-1(Aluminium)	-	14900	-
Cl-6.2(The chemical analysis)	-	14900	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	14900	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	14900	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	14900	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	14900	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	14900	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	14900	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	14900	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	14900	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	14900	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	14900	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	14900	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	14900	-
Cl-7.2(Tensile Tests)	-	14900	-
Cl-7.3(Test Pieces)	-	14900	-
Cl-7.4(Hardness)	-	14900	-
Cl-8(Freedom from Defects)	-	14900	-
Cl-11(RETEST)	-	14900	-
Cl-13(Marking)	-	14900	-
Cl. 6(Silicon)	-	14900	-
Cl. 6(Iron)	-	14900	-
Cl. 6(Copper)	-	14900	-
Cl. 6(Manganese)	-	14900	-
Cl. 6(Magnesium)	-	14900	-
Cl. 6(Chromium)	-	14900	-
Cl. 6(Nickel)	-	14900	-
Cl. 6(Zinc)	-	14900	-
Cl. 6(Lead)	-	14900	-
Cl. 6(Tin)	-	14900	-
Cl. 6(Titanium)	-	14900	-
Cl. 6(Others Element Each)	-	14900	-
Cl. 6(Others Element Total)	-	14900	-
Cl. 6(Aluminium)	-	14900	-
Cl. 6(Silver)	-	14900	-
Cl. 6(Zirconium)	-	14900	-
Cl. 6(Titanium+Zirconium)	-	14900	-
Cl. 6(Antimony)	-	14900	-
Cl. 6(Cobalt)	-	14900	-
Cl. 6(Antimony+Cobalt)	-	14900	-
Cl. 6(Beryllium)	-	14900	-
10(Pressure Test)	-	14900	-

08 May, 2028

-
Included w.e.f 02.07.2025

5394

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
Clause No - 5.18(linear and angular dimension)	-	2000	-
Clause No - 6.2(harmfull ingress of water)	-	2000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	2000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	2000	-
Clause No - 8.2(Addition)	-	2000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	2000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	2000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	3000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	2000	-
Clause No -21.1(Mechanical strength)	-	2000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	2000	-
Clause No -24.1.2(safety isolating transformer)	-	2000	-
Clause No -24.1.3(for switches)	-	2000	-
Clause No -24.1.4(for automatic control)	-	2000	-
Clause No -24.1.5(for innterconnection couplers)	-	2000	-
Clause No -24.4(plug and socket)	-	2000	-
Clause No -25.8, Table no -11(conductor resistance)	-	2000	-
Clause No -25.5(dimension for pins)	-	2000	-
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	2000	-
Clause No -29.3.3(dry heat test)	-	2000	-
Clause No -30.2.1(glow wire test)	-	2000	-
Clause No -30.101("incorporate combustible material")	-	2000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22(CONSTRUCTION)	-	2000	-
24(COMPONENTS)	-	2000	-
11(Heating)	-	2000	-

19 Jul, 2027

-
Included w.e.f 10.07.2025 Exclusion : Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 32 Radiation, toxicity and similar hazards

5395

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	15000	-
Clause.4.0(Carbon)	-	15000	-
Clause.4.0(Sulphur)	-	15000	-
Clause.4.0(Sulphur)	-	15000	-
Clause.4.0(Phosphorus)	-	15000	-
Clause.4.0(Silicon)	-	15000	-
Clause.4.0(Manganese)	-	15000	-
Clause.5.0(Supply of Material)	-	15000	-
Clause.5.0(Supply of Material)	-	15000	-
Clause.6.0(Workmanship)	-	15000	-
Clause.7.0(Straightness)	-	15000	-
Clause.8.0(Basis of Calculation)	-	15000	-
Clause.9.0(Length)	-	15000	-
Clause.10.0(Dimensions and properties)	-	15000	-
Clause.10.0(Dimensions and properties)	-	15000	-
Clause.11.0(General)	-	15000	-
Clause.11.0(Outside Dimension)	-	15000	-
Clause.11.0(Thickness)	-	15000	-
Clause.11.0(Thickness)	-	15000	-
Clause.11.0(Concavity and Convexity)	-	15000	-
Clause.11.0(Squareness of Sides)	-	15000	-
Clause.11.0(External Corner Radiius)	-	15000	-
Clause.11.0(Straightness and twist)	-	15000	-
Clause.12.0(Dimension Tolerances)	-	15000	-
Clause.12.0(Dimension Tolerances)	-	15000	-
Clause.13.0(Surface Protection)	-	15000	-
Clause.14.0(Testing)	-	15000	-
Clause.15.0(Tensile test)	-	15000	-
Clause.15.0(Yield strength)	-	15000	-
Clause.15.0(Elognation Percent)	-	15000	-
Clause.18.0(Marking)	-	15000	-
6(Workmanship)	-	15000	-
10(Dimensions and Properties)	-	15000	-
11(Measurement of Shape and Size)	-	15000	-
12(Dimensions and Tolerances)	-	15000	-
13(Surface Protection)	-	15000	-
15(Tensile Test)	-	15000	-

13 May, 2028

-
Included w.e.f 03.07.2025

5396

DELHI TEST HOUSE, Azadhpur

8131406

IS 15905 (2024)

Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories — Spigot Series —Specification

ALL

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	1000	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-5.4(pipes and fittings)	-	500	Rs.500/- EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR > 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-6.2(EPDM)	-	10000	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-6.4(Minimum Free Lengths)	-	500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH
Cl-8(Crush tests on pipes ring)	-	2000	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-9(Hydrostatic test)	-	5000	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.2(External Diameters and Tolerances)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.3(Thickness and Tolerances)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.4(Length and Tolerances)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.5(Tolerances on Angles)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.6(Straightness of Pipe)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.7(End Faces)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.1(Pipe)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.1(Bend)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.2(Bend with or without access door)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.3(Long radius bend)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.4(Long tail bend)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.5(Horn plain bend)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.6(Double bend)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.7(Single branch)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.8(Single branch with or without access door)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.9(Double branch)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.11(Diminishing pieces)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.12(Offset)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.13(Equal and unequal parallel branch)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.14(P trap)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.15(H ventilation pipe)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.16(Y ventilation pipe)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.17(T Y single branch)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR >100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.18(Vent cowel)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.19(Inspection pipe (clean-out pipe))	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.20(Unequal trap)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.21(Single branch with or without door)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.22(Single branch socketed with access door)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.23(Multi inlet pipe)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.24(Floor trap (deep seal))	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-10.8.2.25(Access door)	-	1500	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-11.2(Resistance to Salt Spray)	-	5000	RS.15/- EACH Hrs.
Cl-12(Marking)	-	250	Rs.500/- EXTRA EACH CHEMICAL PARAMETER,FOR UPTO 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 2500/- AND EXTRA Rs 500/- EACH OPENING MOUTH&FOR ABOVE 100MM SIZE WITH TWO OPENING MOUTH TESTING CHRGERS-Rs 5000/- AND EXTRA Rs 1000/- EACH OPENING MOUTH,
Cl-6(Joints)	-	5000	IF REQUIRED CLAMPING COMPONENT TESTING

17 Jun, 2027

-
Included w.e.f 28.07.2025

5397

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	500	-
5.4.3(Sole bond)	-	800	-
5.4.4(Slip resistance)	-	1500	-
5.4.5(Leak proofness)	-	800	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	1000	-
5.4.6.4(Impact resistance)	-	1000	-
5.4.6.5(Compression resistance)	-	1000	-
5.4.7(Colour)	-	150	-
5.5.1(Upper material)	-	200	-
5.5.1(Upper Thickness)	-	200	-
5.5.2(Upper tensile strength)	-	800	-
5.5.3(Upper flexing)	-	1200	-
5.5.4(Upper Hardness)	-	500	-
5.6.1(Lining material)	-	200	-
5.6.2(Lining Tear strength)	-	800	-
5.6.3(Lining abrasion)	-	1200	-
5.6.4(Lining adhesion with upper)	-	800	-
5.7.1(Insole material)	-	200	-
5.7.1(Insole thickness)	-	200	-
5.7.2(Insole abrasion)	-	600	-
5.7.3(Water absorption and desorption)	-	1000	-
5.8.2(Eyelets material)	-	200	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	800	-
5.9.1(Insock material)	-	200	-
5.9.2(Inscok abrasion resistance)	-	1200	-
5.9.3(Insock water absorption and desorption)	-	1000	-
5.8.2(Closing thread breaking load)	-	800	-
5.11.1(Outsole material)	-	200	-
5.11.1(Outsole thickness)	-	200	-
5.11.2(Outsole density)	-	800	-
5.11.3(Outsole Interlayer bond)	-	800	-
5.11.4(Outsole tear)	-	800	-
5.11.5(Outsole Abrasion)	-	1200	-
5.11.6(Outsole hardness)	-	500	-
5.11.7(Outsole flexing)	-	1200	-
5.4.8.1(Conductive Footwear)	-	1500	-
5.4.8.2(Antistatic Footwear)	-	1500	-
5.4.8.3.2(Penetration resistance)	-	800	-
5.4.8.4(Cut resistance)	-	800	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	2000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.11.8(Outsole cold flex resistance)	-	2000	-
6.1(Volatility)	-	600	-
6.2(Lead content)	-	600	-
Table 1 as per IS 17011 2018(pH)	-	600	Chemical package charges 30000/-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	3000	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	3000	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	3000	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	3000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	3000	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
5.10(Closing Thread (If used))	-	800	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	800	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	800	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.1(Insole thickness)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.8.2(Closing thread breaking load)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
Table 1 as per IS 17011 2018(pH)	-	0	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	0	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	0	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	0	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	0	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	0	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	0	-
5.10(Closing Thread (If used))	-	0	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	0	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	0	-

-
Included w.e.f. 12.11.2025 5.5.5 (Upper Cold flex resistance)

5398

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

All Size

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	7000	-
6(Freedom from defects)	-	5000	-
8(Dimensions and Tolerances)	-	5000	-
Cl. 5.1, 5.2(chromium)	-	7000	-
Cl. 5.1, 5.2(silicon)	-	7000	-
Cl. 5.1, 5.2(copper)	-	7000	-
Cl. 5.1, 5.2(aluminium)	-	7000	-
Cl. 5.1, 5.2(Nitrogen )	-	7000	-
Cl. 5.1, 5.2(Phosphorus)	-	7000	-
Cl. 5.1, 5.2(Sulphur)	-	7000	-
Cl. 5.1, 5.2(Manganese)	-	7000	-
Cl. 5.1, 5.2(carbon)	-	7000	-
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	0	-
6(Freedom from defects)	-	0	-
8(Dimensions and Tolerances)	-	0	-
Cl. 5.1, 5.2(chromium)	-	0	-
Cl. 5.1, 5.2(silicon)	-	0	-
Cl. 5.1, 5.2(copper)	-	0	-
Cl. 5.1, 5.2(aluminium)	-	0	-
Cl. 5.1, 5.2(Nitrogen )	-	0	-
Cl. 5.1, 5.2(Phosphorus)	-	0	-
Cl. 5.1, 5.2(Sulphur)	-	0	-
Cl. 5.1, 5.2(Manganese)	-	0	-
Cl. 5.1, 5.2(carbon)	-	0	-

-
Included w.e.f 22.07.2025

5399

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5517 (1993)

Steels for hardening and tempering - Speicification (Second Revision)

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	For complete chemical testing
5(Freedom from defects , IS 5517)	-	2500	For dimension and other qualitative tests
8,Table 6(Hardness Test - IS 1500(Pt -1))	-	12500	Mechanical testing (tensile and Hardness)
9, Table 5(Mechanical ptoperties - IS 1608(Pt -1),IS 1598)	-	12500	Mechanical testing (tensile and Hardness)
10(Grain Size - IS 4748)	-	2500	For dimension and other qualitative tests
11.1(Inclusion Rating- IS 4163)	-	2500	For dimension and other qualitative tests
11.2(Blue Fracture Test - IS 10138 (Pt1))	-	3500	For Blue fracture test
11.2(Step Down Test- IS 10138(Pt2))	-	2500	For dimension and other qualitative tests
11.2(Magnetic Particle Test -- IS 10138(Pt3))	-	2500	For dimension and other qualitative tests
12;Table 7(Hardenability Test-IS 3848)	-	2500	For dimension and other qualitative tests
13.1&13.2&13.3(Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-	2500	For dimension and other qualitative tests
16.1 a)(Additional Test; Macro etch Test)	-	2500	-
16.1 b)(Additional Test; Ultrasonic Test -IS 3664)	-	1000	For additional mechanical tests
16.1 c); Table 7(Additional Test;Hardenability Test)	-	1000	For additional mechanical tests
16.1 d);Table 5(Additional Test;Blank Hardening Test)	-	1000	For additional mechanical tests
16.1 e)(Additional Test;Cleanliness Test-IS 10138(Pt 1to3))	-	1000	For additional mechanical tests
16.1 f)(Microstructure for machinability,including banding)	-	5000	For microstructure tests
16.1 g)(Hot up set for forgability)	-	5000	For Forgability test
Cl 6.2 & Table 2(Carbon- IS 228(Part 1))	-	5000	For complete chemical testing
Cl 6.2 & Table 3(Sulphur- IS 228(Part 9))	-	5000	For complete chemical testing
Cl 6.2 & Table 4(Phosphorous- IS 228(Part 3))	-	5000	For complete chemical testing
Cl 6.2 & Table 5(Manganese- IS 228(Part 2))	-	5000	For complete chemical testing
Cl 6.2 & Table 6(Silicon- IS 228(Part 2))	-	5000	For complete chemical testing

-
Included w.e.f 26.06.2025

5400

Byte Scientific Research Lab Private Limited

8189436

IS/ISO 834 : Part 8 (2002)

Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements

upto size 3 meter x 3 meter

440000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	440000		Installation of sample would be done by client itself at our facility.

28 Oct, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number