BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5401

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 550 : Part 1 (2022)

Safes: Part 1 specification Fifth Revision

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	5000	-
5.1(Dimensions)	-	5000	-
5.2(Sizes)	-	5000	-
6(Material declaration)	-	5000	-
7(Desigantion-Delaration)	-	5000	-
8.1(Body (Construction & workmanship))	-	5000	-
8.2(Door (Gap))	-	5000	-
8.4.1(Hinges)	-	5000	-
8.4.2(Bolts)	-	5000	-
8.5(Handle)	-	5000	-
8.6.1(Lock (key type) Garde)	-	5000	-
8.8(Cable hole size)	-	5000	-
9(Internal fixture)	-	5000	-
10(Painting)	-	5000	-
10.1(Cross hatch test)	-	5000	-
11.1(Marking of safe)	-	5000	-
12(Burglary attack)	-	150000	-
12(Fire Resistance)	-	150000	-

25 Oct, 2027

-
-

5402

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	25000	-
Cl. 9.2(Testing)	-	20000	-
Cl. 9.3(Cross Hatch Test)	-	20000	-
Cl. 10.1(Marking)	-	1500	-
Cl. 10.2(Marking)	-	1500	-
Cl. 10.3(Marking)	-	1500	-
Cl. 10.4(Marking on Keys)	-	1500	-
Cl. 11(Packing)	-	1500	-
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	25000	-
Cl. 9.2(Testing)	-	25000	-
Cl. 9.3(Cross Hatch Test)	-	20000	-
Cl. 10.1(Marking)	-	1500	-
Cl. 10.2(Marking)	-	1500	-
Cl. 10.3(Marking)	-	1500	-
Cl. 10.4(Marking on Keys)	-	1500	-
Cl. 11(Packing)	-	1500	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Cl. 9.2(Testing)	-	20000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-

25 Oct, 2027

-
-

5403

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 14203 (2017)

Fire resisting record protection cabinets - Specification (Second Revision)

340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nominal Sizes)	-	5000	-
4(Types)	-	5000	-
5(i) Steel components)	-	5000	-
6(a) Heght)	-	5000	-
6(b) Width)	-	5000	-
6(c) Depth)	-	5000	-
7(Designation)	-	5000	-
8(General Constructions)	-	5000	-
8.1(Cabinet construction)	-	5000	-
8.1(i) Outer body and inner box shall be fabricated from mild steel or galvanised steel sheets of not less than 0.8 mm nominal thickness. The steel parts shall not have any burrs or dents. If required the outer body shall be suitably stiffened to avoid bulging)	-	5000	-
8.1(The cabinet body of the fire resisting record protection cabinet shall be of double wall type with insulating material filled in-between. The insulating material should not produce toxic gases when the cabinet is exposed to fire situation The components shall be assembled by bolting, welding, riveting or by any combination of these methods)	-	5000	-
8.2(Locking Mechanism: The locking mechanisms shall be of 4 way type. The diameter of shooting bolts shall be 15 mm to 20 mm. There shall be minimum three shooting bolts (two shooting bolts for size 1 000) on each side and minimum one vertical shooting bolt each on top and bottom. The shooting bolts shall slide smoothly in recess and engage in body to a minimum depth of 12 mm.)	-	5000	-
8.3(Locks: The cabinet shall be supplied with a dual control key lock having minimum 6 levers with duplicate keys. The keys shall be made of stainless steel or any other non ferrous metal/alloy having non-corrosive properties. Minimum two sets of the keys shall be supplied. Alternatively three wheel combination locks in place of key lock or both may be provided, if required by the purchaser. purchaser)	-	5000	-
8.4(Handles: Handle shall be made from ferrous (powder coated/ plated), non-ferrous material or polymer)	-	5000	-
9(Internal Fixtures:)	-	5000	-
9.1(The cabinet shall be provided with minimum four shelves for nominal size 1 600, three shelves for nominal size 1 300 and two shelves for cabinets of nominal size 1 000. Shelf height shall be adjustable)	-	5000	-
9.2(A cabinet may also be provided with drawer unit fitted with any suitable lock)	-	5000	-
10(Painting)	-	5000	-
10.1(i)The inside and outside surfaces of cabinet shall be painted or powder coated. In case of paint an appropriate primer and under coating shall be used in accordance with normal industrial practices)	-	5000	-
10.1(ii)The minimum overall thickness of the coatings shall be 50 microns for powder coatings and 70 microns for liquid paints)	-	5000	-
10.1.1(Cross hatch test shall be conducted to conform the adhesion of coating in accordance with 10.2)	-	5000	-
10.2(Cross Hatch Test: )	-	5000	-
10.2(a) Make 6 parallel cut marks using sharp metal pointer and straight edge, through the painted/ coated surface, so as to make the base surface visible through cut marks.)	-	5000	-
10.2(b)Cut marks shall be minimum 20 mm long and at 2 mm distance from each other.)	-	5000	-
10.2(c)Make 6 similar cut marks in the direction perpendicular to first set of cut marks, with same length and spacing )	-	5000	-
10.2(d) These 12 cut marks together shall make a pattern of 25 squares of 2 mm × 2 mm size, totally separated from each other)	-	5000	-
10.2(e) A good quality transparent adhesive tape not less than 20 mm width, shall be stuck on the pattern, parallel to any one set of cut marks)	-	5000	-
10.2(f) To ensure continuous contact with paint/coat film, rub the tape firmly and remove air bubbles under the tape, if any)	-	5000	-
10.2(g)Within 60 to 120 s after sticking the tape, remove it by seizing free end of the tape and rapidly pulling it off at an angle close to 180°.)	-	5000	-
10.2(h) Painting/Coating quality is considered as acceptable, if no part of any 2 mm × 2 mm square of paint/coat comes off the surface due to pulling the tape)	-	5000	-
11.2(Fire endurance test: The fire resisting record protection cabinets shall be considered to be conforming to the requirements of this standard if they successfully complete the fire endurance test (see B-3.1) and fire and impact test (see B 3.2).)	-	170000	-
11.2.1(The fire resisting record protection cabinets shall be considered to be conforming to the requirements of this standard, if they pass the fire endurance test (see B-3.1) and fire and impact test (see B-3.2) if the contents (see B-1.1, B-3.1.1, B-3.2.1) kept in the cabinets during the test are found usable.)	-	10000	-
12.1(Marking:A metal plate showing type of cabinet together with the manufacturer’s name and the year of manufacture shall be fixed on the inner face of the door)	-	5000	-
12.2(Marking on Keys: The keys shall be marked with an identification number which shall not be the same as the serial number of the cabinet.)	-	5000	-
3(Nominal Sizes)	-	-	-
4(Types)	-	-	-
5(i) Steel components)	-	-	-
6(a) Heght)	-	-	-
6(b) Width)	-	-	-
6(c) Depth)	-	-	-
7(Designation)	-	-	-
8(General Constructions)	-	-	-
8.1(Cabinet construction)	-	-	-
8.1(i) Outer body and inner box shall be fabricated from mild steel or galvanised steel sheets of not less than 0.8 mm nominal thickness. The steel parts shall not have any burrs or dents. If required the outer body shall be suitably stiffened to avoid bulging)	-	-	-
8.1(The cabinet body of the fire resisting record protection cabinet shall be of double wall type with insulating material filled in-between. The insulating material should not produce toxic gases when the cabinet is exposed to fire situation The components shall be assembled by bolting, welding, riveting or by any combination of these methods)	-	-	-
8.2(Locking Mechanism: The locking mechanisms shall be of 4 way type. The diameter of shooting bolts shall be 15 mm to 20 mm. There shall be minimum three shooting bolts (two shooting bolts for size 1 000) on each side and minimum one vertical shooting bolt each on top and bottom. The shooting bolts shall slide smoothly in recess and engage in body to a minimum depth of 12 mm.)	-	-	-
8.3(Locks: The cabinet shall be supplied with a dual control key lock having minimum 6 levers with duplicate keys. The keys shall be made of stainless steel or any other non ferrous metal/alloy having non-corrosive properties. Minimum two sets of the keys shall be supplied. Alternatively three wheel combination locks in place of key lock or both may be provided, if required by the purchaser. purchaser)	-	-	-
8.4(Handles: Handle shall be made from ferrous (powder coated/ plated), non-ferrous material or polymer)	-	-	-
9(Internal Fixtures:)	-	-	-
9.1(The cabinet shall be provided with minimum four shelves for nominal size 1 600, three shelves for nominal size 1 300 and two shelves for cabinets of nominal size 1 000. Shelf height shall be adjustable)	-	-	-
9.2(A cabinet may also be provided with drawer unit fitted with any suitable lock)	-	-	-
10(Painting)	-	-	-
10.1(i)The inside and outside surfaces of cabinet shall be painted or powder coated. In case of paint an appropriate primer and under coating shall be used in accordance with normal industrial practices)	-	-	-
10.1(ii)The minimum overall thickness of the coatings shall be 50 microns for powder coatings and 70 microns for liquid paints)	-	-	-
10.1.1(Cross hatch test shall be conducted to conform the adhesion of coating in accordance with 10.2)	-	-	-
10.2(Cross Hatch Test: )	-	-	-
10.2(a) Make 6 parallel cut marks using sharp metal pointer and straight edge, through the painted/ coated surface, so as to make the base surface visible through cut marks.)	-	-	-
10.2(b)Cut marks shall be minimum 20 mm long and at 2 mm distance from each other.)	-	-	-
10.2(c)Make 6 similar cut marks in the direction perpendicular to first set of cut marks, with same length and spacing )	-	-	-
10.2(d) These 12 cut marks together shall make a pattern of 25 squares of 2 mm × 2 mm size, totally separated from each other)	-	-	-
10.2(e) A good quality transparent adhesive tape not less than 20 mm width, shall be stuck on the pattern, parallel to any one set of cut marks)	-	-	-
10.2(f) To ensure continuous contact with paint/coat film, rub the tape firmly and remove air bubbles under the tape, if any)	-	-	-
10.2(g)Within 60 to 120 s after sticking the tape, remove it by seizing free end of the tape and rapidly pulling it off at an angle close to 180°.)	-	-	-
10.2(h) Painting/Coating quality is considered as acceptable, if no part of any 2 mm × 2 mm square of paint/coat comes off the surface due to pulling the tape)	-	-	-
11.2(Fire endurance test: The fire resisting record protection cabinets shall be considered to be conforming to the requirements of this standard if they successfully complete the fire endurance test (see B-3.1) and fire and impact test (see B 3.2).)	-	-	-
11.2.1(The fire resisting record protection cabinets shall be considered to be conforming to the requirements of this standard, if they pass the fire endurance test (see B-3.1) and fire and impact test (see B-3.2) if the contents (see B-1.1, B-3.1.1, B-3.2.1) kept in the cabinets during the test are found usable.)	-	-	-
12.1(Marking:A metal plate showing type of cabinet together with the manufacturer’s name and the year of manufacture shall be fixed on the inner face of the door)	-	-	-
12.2(Marking on Keys: The keys shall be marked with an identification number which shall not be the same as the serial number of the cabinet.)	-	-	-

25 Oct, 2027

-
-

5404

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 550 : Part 1 (2014)

Safes: Part 1 specification (Fifth Revision)

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4 Table 1(CLASSIFICATIONS)	-	5000	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	5000	-
Cl. 5 Table 10(DIMENSIONS AND SIZES)	-	5000	-
Cl. 7 (DESIGNATIONS)	-	5000	-
Cl. 8.1(Body)	-	5000	-
Cl. 8.3(Door)	-	5000	-
Cl. 8.4.1(Hinges)	-	5000	-
Cl. 8.4.2(Bolts)	-	5000	-
Cl. 8.5 Table 3(Handles)	-	5000	-
Cl. 8.6.1(Locks (Type))	-	5000	-
Cl. 8.6.2(Locks (Levers))	-	25000	-
Cl. 8.6.3(Tests for locks)	-	25000	-
Cl. 8.6.4(Keys)	-	5000	-
Cl. 8.6.5(Unpickability)	-	5000	-
Cl. 8.6.6(Non-interchangeability)	-	5000	-
Cl. 8.7(Automatic Relocking Device)	-	10000	-
Cl. 9(INTERNAL FIXTURES)	-	5000	-
Cl. 10(Painting)	-	5000	-
Cl. 10(Painting)	-	5000	-
Cl. 11.1(Marking of Safes)	-	5000	-
Cl. 11.2( Marking on Keys)	-	5000	-
Cl. 11.3(BIS Certification Marking)	-	5000	-

25 Oct, 2027

-
-

5405

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 1046 (2014)

Cash boxes - Specification (Fourth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Fabrication)	-	5000	NA
Clause-5.2(Body)	-	5000	Na
Clause-5.3(Bottom)	-	5000	Na
Clause-5.4(Lid)	-	5000	Na
Clause-5.5(Hinges)	-	5000	Na
Clause-5.6(Bolts)	-	5000	Na
Clause-5.7(Handle)	-	5000	Na
Clause-5.8(Lock)	-	5000	Na
Clause-5.8.1(Levers)	-	5000	Na
Clause-5.8.2(Lever Spring)	-	5000	Na
Clause-5.8.3(Key)	-	5000	Na
Clause-5.8.4(Unpickability)	-	5000	NA
Clause-5.8.5(Non-interchangeability)	-	5000	Na
Clause-6(Internal Fixtures)	-	5000	Na
Clause-8(Marking)	-	5000	Na

25 Oct, 2027

-
-

5406

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 11188 : Part 1 (2014)

Vault (Strong Room) doors: Part 1 specification (Second Revision)

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(DIMENSIONS)	-	5000	-
5 Table 1(i) Door Type)	-	5000	-
5 Table 1(ii) Overall dimension of vault door)	-	5000	-
5 Table 1( a) Height,H)	-	5000	-
5 Table 1( b) Width W)	-	5000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	5000	-
5 Table 1( a) Height H, Min b) Width W, Min iv) a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min )	-	5000	-
5 Table 1( b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	5000	-
5 Table 1( v) Dimension of the rebate coming under shear)	-	5000	-
5 Table 1( vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	5000	-
5 Table 1( vii) Diameter of grill gate rods, Min)	-	5000	-
5 Table 1( viii) Pitch of grill gate rods)	-	5000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	5000	-
5 Table 1(xii) Wall thickness (recommendation))	-	5000	-
5 Table 1(xiii) Number of locks)	-	5000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	5000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	5000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	5000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	5000	-
5 Table 1(xix) Depth of engagement of shooting)	-	5000	-
8( CONSTRUCTION AND GENERALREQUIREMENTS)	-	5000	-
8.1.1( Ventilating Grill Gate (Inside))	-	5000	-
8.1.2( Main Door (Outside))	-	5000	-
8.2(Doors Frame)	-	5000	-
8.2.1 (Rebate of the Door Frame)	-	5000	-
8.2.2 (Compression Mechanism)	-	5000	-
8.2.3 (Crane Hinge Mechanism)	-	5000	-
8.3(Locking Mechanism)	-	5000	-
8.3.1( Lock Case)	-	5000	-
8.3.2 (Bolt Work)	-	5000	-
8.3.2.1 Table 1.(The number of bolts and their minimum dimension)	-	5000	-
8.4(Lock)	-	5000	-
8.4.5 (Automatic Relocking Device)	-	5000	-
9( DOOR FITTINGS)	-	5000	-
9.1(Hinges)	-	5000	-
9.1.1( Adjusting Bolt)	-	5000	-
9.2( Handles)	-	5000	-
9.3( Foot Bridge)	-	5000	-
10(FINISH)	-	20000	-
10.3( Cross Hatch Test)	-	20000	-
IS 11188 (Part 2), 3.1 and 3.2( i)Net Working time, Minutes)	-	37500	-
IS 11188 (Part 3) Cl4.4(Fire endurance IS 11188 (Part 3))	-	85000	-
IS 11188 (Part 3) Cl 4.5(Fire and stream hose IS 11188 (Part 3))	-	85000	-
11(Burglary resistance IS 11188 (Part 2))	-	37500	-

25 Oct, 2027

-
-

5407

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 14561 (2014)

Fire resisting (Insulating) filing cabinets - Specification (Second Revision)

335000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Types & Rating)	-	5000	-
3.1(i) The fire resisting filing cabinets shall be of two types: a) Vertical fire resisting filing cabinet, and b) Lateral fire resisting filing cabinet.)	-	5000	-
3.2(ii) The standard and lateral fire resisting filing cabinets shall have one-drawer or two-drawers or three drawers or four-drawers. A typical drawing of the fire resisting filing cabinet is given in Fig. 1.)	-	5000	-
3.3(iii) The fire resisting filing cabinets shall have fire resisting ratings of 60 min or 120 min or 180 min or 240 min)	-	5000	-
4(Dimensions and Tolerances, mm)	-	5000	-
4.1(Overall Dimensions of Fire Resisting Filing Cabinets: The internal usable space of the drawers of fire resisting (insulating) filing cabinets shall be as specified in Table 1 or any other size which is mutually agreed to between the purchaser and the supplier.)	-	5000	-
4.1(Internal usuable space of drawer, mm:)	-	5000	-
4.1(iv) Height of the bottom drawer above floor level)	-	5000	-
6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.)	-	5000	-
7(Constructions)	-	5000	-
7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front )	-	5000	-
7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.)	-	5000	-
7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same )	-	5000	-
7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.)	-	5000	-
7.4.2(The locking mechanism shall be designed in such a manner so that there is minimum passage for direct conduction of heat from outside to inside)	-	5000	-
7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer: a) Ball bearing / Roller bearing suspension (Movement), b) Solid roller suspension, and c) Telescopic slide suspension (Extension)	-	5000	-
7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism)	-	5000	-
7.6.1(The drawer handle shall be strong enough to take a minimum pull of 50 N for 2 min. There shall be no sharp corners or edges to avoid injury and damage to clothing)	-	5000	-
7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock)	-	5000	-
7.7.2(Each drawer may also be provided with individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.)	-	5000	-
7.8.1(The locking mechanism shall be such that when the top drawer is pushed-in fully, it actuates locking mechanism to lock all other drawers imultaneously, when they are in pushed-in position)	-	5000	-
7.8.1.1(At the time of locking the cabinet, if one of the drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.)	-	5000	-
7.8.1.2(In addition to the above, isolation mechanism shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated)	-	5000	-
8(Assemblies)	-	5000	-
8.1(The components shall be assembled by bolting, welding, riveting or by any combination of these processes)	-	5000	-
8.2(All joints between outer body and inner boxes, the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body)	-	5000	-
9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg (excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner)	-	5000	-
10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale)	-	15000	-
10.2(The inside and outside surfaces of the fire resisting (Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1)	-	15000	-
10.2.1(Cross Hatch Test)	-	15000	-
11.1(Fire endurance test)	-	150000	-
11.2(Fire and impact test)	-	100000	-
12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the year of manufacture shall be fixed inside surface of the top drawer of the cabinet in such a way that it is visible when it is opened.)	-	5000	-
12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet)	-	5000	-

25 Oct, 2027

-
-

5408

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 14562 (2014)

Fire resisting computer media protection cabinets - Specification (First Revision)

325000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Nominal Size (Declared))	-	5000	NA
3(Type)	-	5000	NA
4(Materail(Declaration))	-	5000	NA
5(Dimension & Tolerance - Nominal Size)	-	5000	NA
5(Nomina Inside dimension - Height)	-	5000	NA
5(Nomina Inside dimension - Width)	-	5000	NA
5(Nomina Inside dimension - Depth)	-	5000	NA
6(Designation)	-	5000	NA
7(Construction)	-	5000	NA
8(Assembly)	-	5000	NA
9.1(Fabrication (Thickness of Internal steelsheet))	-	5000	NA
9.2(Shelf)	-	5000	Na
9.3(Door (Thickness of steel sheet))	-	5000	Na
9.3(Door (Thickness of steel sheet))	-	5000	NA
9.4(Handle)	-	5000	Na
9.5(Compression mechanism)	-	5000	NA
9.6(Weight)	-	15000	NA
10(Sampling (Sample quantity))	-	5000	NA
11(Tests - Fire Resistancy)	-	150000	NA
11(Tests - Fire Resistancy)	-	150000	NA
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.6(Criteria for conformity -Fire & Impcat test)	-	50000	NA
11.6(Criteria for conformity -Fire & Impcat test)	-	50000	na
11.6(Criteria for conformity -Fire Endurance test)	-	50000	NA
11.7(Test Report)	-	5000	NA
12.1(Paint-Coating thicknes)	-	25000	Na
12.2(Crotch hatch test)	-	25000	NA
12.3(Finish)	-	5000	NA
13.1(Marking)	-	5000	NA
13.1(Marking on keys)	-	5000	NA

25 Oct, 2027

-
-

5409

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

PHOTOVOLTAIC (PV) MODULE

2384500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	30000	-
Cl-11.1(Visual inspection)	-	30000	-
Cl-11.2(Maximum power determination)	-	26000	-
Cl-11.3(Insulation test)	-	70000	-
Cl-11.4(Measurement of temperature coefficients)	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC)	-	42000	-
Cl-11.7(Performance at low irradiance)	-	19500	-
Cl-11.8(Outdoor exposure test)	-	80000	-
Cl-11.9(Hot-spot endurance test)	-	25000	-
Cl-11.10(UV preconditioning test)	-	120000	-
Cl-11.11(Thermal cycling test)	-	400000	-
Cl-11.12(Humidity-freeze test)	-	250000	-
Cl-11.13(Damp heat test)	-	400000	-
Cl-11.14(Robustness of terminations test)	-	12000	-
Cl-11.15(Wet leakage current tes)	-	65000	-
Cl-11.16(Static mechanical load test)	-	20000	-
Cl-11.17(Hail test)	-	20000	-
Cl-11.18(Bypass diode thermal test)	-	20000	-
Cl-11.19(Stabilization)	-	150000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	80000	-
11.21(Potential induced degradation test (MQT 21))	-	350000	-
11.22(Bending test (MQT 22))	-	70000	-
5(Marking and documentation)	-	5000	-

-
Included w.e.f.09.04.2025

5410

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	2000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	Testing charges included in Cl. 7
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	2000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	4000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl.11 of IS 302-2201: 2008(Heating)	-	0	Testing charges included in Cl. 11
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	Testing charges included in Cl. 13
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	2000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	4000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	Testing charges included in Cl. 15
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	3000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	Testing charges included in Cl. 16
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	4000	-
Cl.18 of IS 368:2014(Endurance)	-	5000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	6000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	Testing charges included in Cl. 19
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	2000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Testing charges included in Cl. 21
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	Testing charges included in Cl. 21
Cl.22 of IS 302-2-201: 2008(Construction)	-	5000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	Testing charges included in Cl. 22
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	Testing charges included in Cl. 23
Cl.24 of IS 302-2-201: 2008(Component)	-	3000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.24 of IS 302-2-201: 2008(Component)	-	0	Testing charges included in Cl. 24
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl. 25
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	2000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	Testing charges included in Cl. 27
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	2000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	Testing charges included in Cl. 29
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	3000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	Testing charges included in Cl. 30
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

5411

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 18800 (2023)

Stainless steel feeding bottle for infants -- Specification

29900 View breakup
-

Clause No.	Exclusion	Remark
Cl.4.1(Carbon - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Silicon - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Nickel - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Sulphur - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Phosphorous - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Nitrogen - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Molybdenum - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	-
Cl.4.1(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	-
5.1.1(Description)	-	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	-
5.1.3(Wall Thickness)	-	-
5.1.4(Capacity)	-	-
5.2(Mechanical Requirements)	-	-
5.3.1(Leakage Test)	-	-
5.3.2(Drop Test)	-	-
5.3.3(Compressive Deformation Resistance)	-	-
5.3.4(Permanency of Pigments of Printed Container)	-	-
5.1.1(Description)	-	-
5.1.2(Manufacture, Workmanship, Finish and Appearance)	-	-
5.1.3(Wall Thickness)	-	-
5.1.4(Capacity)	-	-
5.2(Mechanical Requirements)	-	-
5.3.1(Leakage Test)	-	-
5.3.2(Drop Test)	-	-
5.3.3(Compressive Deformation Resistance)	-	-
5.3.4(Permanency of Pigments of Printed Container)	-	-
Cl.5.3.4(Permanency of Pigments - Annex D of IS 18800)	-	-

25 Feb, 2027

-
Included w.e.f 12.06.2025

5412

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 9857 (1990)

Welding cables - Specification (First Revision)

All

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Conductor : Material )	-	0	-
5(SEPARATOR)	-	0	-
6(COVERING)	-	0	-
7(CONDUCTOR : CONSTRUCTION )	-	0	-
8(S E P A R A T O R)	-	0	-
9.1(C O V E R I N G : Application )	-	0	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	0	-
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	0	-
9.4(A p p l i c a t i o n of C o v e r i n g)	-	0	-
9.5(Colour of C o v e r i n g)	-	0	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	0	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	0	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	0	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	0	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	0	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	0	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	0	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	0	-
10.1 c) 5)(Hot set test )	-	0	-
10.1 c) 5)(Permanent set )	-	0	-
11.1(High Voltage Test ( Water Immersion Test ))	-	0	-
11.2(Spark Test)	-	0	-
11.3(Static Flexibility Test)	-	0	-
11.4(Flammability Test)	-	0	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-
12.3(Cable Code)	-	0	-
13.1(Packing )	-	0	-
13.2(Marking)	-	0	-
14(CABLE RATINGS)	-	0	-
15(VOLTAGE DROP)	-	0	-
Table 4(Copper purity test)	-	0	-
Table 2(Oil resistance - Elongation)	-	0	-
Table 2(Oil resistance - Tensile strength )	-	0	-
Table 2(Ageing in air bomb - Elongation)	-	0	-
Table 2(Ageing in air bomb - Tensile strength )	-	0	-
Table 1 (Thickness of covering)	-	0	-
15.1 (d)(Heat Shock Test)	-	0	-
15.1 (d)(Hot Deformation Test)	-	0	-
15.1 (d)(Loss Of Mass Test)	-	0	-
10.1(b), Table 1(Thickness of covering)	-	0	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	0	-
4(Conductor : Material )	-	-	-
5(SEPARATOR)	-	-	-
6(COVERING)	-	-	-
7(CONDUCTOR : CONSTRUCTION )	-	-	-
8(S E P A R A T O R)	-	-	-
9.1(C O V E R I N G : Application )	-	-	-
9.2(T h i c k n e s s o f C o v e r i n g)	-	-	-
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	-	-
9.4(A p p l i c a t i o n of C o v e r i n g)	-	-	-
9.5(Colour of C o v e r i n g)	-	-	-
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	-	-
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	-	-
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	-	-
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	-	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	-	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	-	-
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	-	-
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	-	-
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	-	-
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	-	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	-	-
10.1 c) 5)(Hot set test )	-	-	-
10.1 c) 5)(Permanent set )	-	-	-
11.1(High Voltage Test ( Water Immersion Test ))	-	-	-
11.2(Spark Test)	-	-	-
11.3(Static Flexibility Test)	-	-	-
11.4(Flammability Test)	-	-	-
12.1(Manufacturer's Identification)	-	-	-
12.2(Cable Identification)	-	-	-
12.3(Cable Code)	-	-	-
13.1(Packing )	-	-	-
13.2(Marking)	-	-	-
14(CABLE RATINGS)	-	-	-
15(VOLTAGE DROP)	-	-	-
Table 4(Copper purity test)	-	-	-
Table 2(Oil resistance - Elongation)	-	-	-
Table 2(Oil resistance - Tensile strength )	-	-	-
Table 2(Ageing in air bomb - Elongation)	-	-	-
Table 2(Ageing in air bomb - Tensile strength )	-	-	-
Table 1 (Thickness of covering)	-	-	-
15.1 (d)(Heat Shock Test)	-	-	-
15.1 (d)(Hot Deformation Test)	-	-	-
15.1 (d)(Loss Of Mass Test)	-	-	-
10.1(b), Table 1(Thickness of covering)	-	-	-
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	-	-

08 Feb, 2027

-
Included w.e.f 20.05.2025

5413

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	0	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	3000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	1000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	1000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 24 302-2-209 : 1994(Components)	-	3000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	2000	-
Cl. 22 302-2-209 : 1994(Construction )	-	5000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	0	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	4000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	3000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	4000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	3000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	4000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	0	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	2000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	0	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	0	-

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

5414

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

UP TO 315 MM

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	5000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
5.3(Ash content- Any Method)	-	1000	-
5.3(Toluene extract - Any Method)	-	1500	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	-
5.3(Carbon black particle size - Any Method)	-	500	-
5.4(Antioxidant - Any Method)	-	2000	-
6.2(Colour- IS 14333-2022)	-	100	-
7.1(Visual Appearance- IS 14333-2022)	-	100	-
7.2(Length- IS 14333-2022)	-	100	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	100	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	7000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.6(Density-IS 7328:2020)	-	1000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	3000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	8000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1500	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1000	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
6(Pipe Description - IS 14333-2022)	-	100	-
7.3(Coiling- IS 14333-2022)	-	100	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	100	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	100	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	5000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	5000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
5.3(Ash content- Any Method)	-	1000	-
5.3(Toluene extract - Any Method)	-	1500	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	-
5.3(Carbon black particle size - Any Method)	-	500	-
5.4(Antioxidant - Any Method)	-	2500	-
6.2(Colour- IS 14333-2022)	-	100	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	1000	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	1000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	6000	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.6(Density-IS 7328:2020)	-	1000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	2500	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	8000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1500	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	500	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
6(Pipe Description - IS 14333-2022)	-	100	-
7.3(Coiling- IS 14333-2022)	-	100	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	1000	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	1000	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	5000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-

18 Dec, 2027

-
Included w.e.f.09.04.2025 Exclusion Cl 5.3 (Density of Higher olefin - IS 7328:2020) Cl 5.3 (Olefin Constituents- 14333-2022)

5415

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

80000 View breakup
-

Clause No.	Exclusion	Remark
4(GENERAL REQUIREMENTS ON TESTS)	-	-
5(MARKING)	-	-
6(Dimensions)	-	-
7(TEST CONDITIONS)	-	-
8(Lamp Input)	-	-
8.1(Lamp Power)	-	-
8.2(Power Factor)	-	-
8.3(Harmonics)	-	-
8.4(Emission of Radio Frequency Disturbances)	-	-
9(light output)	-	-
9.1(Luminous Flux)	-	-
9.2(Luminous Intensity Distribution, Peak Intensity and Beam Angle)	-	-
10(Colour Nomenclature, Variation and Rendering)	-	-
11(Lamp Life)	-	-
12(DIMMING)	-	-
13(VERIFICATION)	-	-
14(TESTS)	-	-
Annex A(METHOD OF MEASURING LAMP CHARACTERISTICS)	-	-
Annex B(EXPLANATION OF THE PHOTOMETRIC CODE)	-	-

13 Dec, 2026

-
Included w.e.f 19.05.2025

5416

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 8448 (1989)

Automatic line voltage correctors (Step Type) for domestic use - Specification (First Revision)

Automatic line voltage correctors (Step Type) for domestic use

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Cooling)	-	0	-
5.1(RATINGS : Rated kVA )	-	100	-
5.2.1(Rated Voltage : Input Voltage Range )	-	100	-
5.2.2(Rated Voltage : Output Voltage Range)	-	100	-
6.1(CONSTRUCTION)	-	150	-
6.2(CONSTRUCTION)	-	150	-
6.3(CONSTRUCTION)	-	150	-
6.4(CONSTRUCTION)	-	150	-
6.5(CONSTRUCTION)	-	150	-
6.6(CONSTRUCTION)	-	150	-
6.7(CONSTRUCTION)	-	150	-
8 of IS 302:1979( SAFETY REQUIREMENTS : Protection Against Electric Shock)	-	22500	-
13.2 of IS 302:1979( SAFETY REQUIREMENTS : Leakage Current)	-	22500	-
20.1 of IS 302:1979( SAFETY REQUIREMENTS : Stability )	-	22500	-
21 of IS 302:1979( SAFETY REQUIREMENTS : Mechanical Strength)	-	22500	-
27 of IS 302:1979( SAFETY REQUIREMENTS : Provision for Earthing )	-	22500	-
28 of IS 302:1979( SAFETY REQUIREMENTS : Screws and Connections )	-	22500	-
29 of IS 302:1979( SAFETY REQUIREMENTS : Clearances )	-	22500	-
8.1(LIMITS OF TEMPERATURE-RISE )	-	0	-
8.2(LIMITS OF TEMPERATURE-RISE )	-	0	-
9.1( PERFORMANCE-REQUIREMENTS )	-	2500	-
10.1(TERMINAL MARKING )	-	150	-
11.1( MARKING : Rating Plate )	-	100	-
11.1( MARKING : Manufacturer’s name and country of manufacture)	-	100	-
11.1( MARKING : Manufacturer’s serial number land type number)	-	100	-
11.1( MARKING : Rated input voltage range)	-	100	-
11.1( MARKING :Rated output voltage)	-	100	-
11.1( MARKING : Rated frequency )	-	100	-
11.1( MARKING : Rated output current)	-	100	-
11.1( MARKING : Rated kVA)	-	100	-
11.1( MARKING : Class of insulation.)	-	100	-
12.2(TESTS : Physical examination)	-	150	-
12.3(TESTS : Output voltage )	-	2500	-
12.4(TESTS : Insulation resistance)	-	2500	-
12.5(TESTS : High voltage)	-	2500	-
12.6(TESTS : No-load current)	-	5000	-
7.1(TESTS : Protection against electric shock)	-	22500	-
7.3(TESTS : Stability )	-	22500	-
7.4(TESTS : Mechanical strength )	-	22500	-
7.5(TESTS : Provision for earthing )	-	22500	-
7.6(TESTS : Screws and connections )	-	22500	-
12.7.1( Temperature-rise : Measurment of Temperature of colling Air)	-	22500	-
12.7.2(Temperature-rise : Determination of Winding Temperature )	-	22500	-
12.7.3(Temperature-rise : Duration of Test of Temperature Rise )	-	22500	-
12.7.4(Temperature-rise : Leading)	-	22500	-
12.7(Temperature-rise : Temperature Correction for Cooling of Transformer after Shut Down )	-	22500	-
7.2(TESTS : Leakage current )	-	22500	-
7.7(TESTS : Creepage distances )	-	22500	-
7.7(TESTS : clearances )	-	22500	-
12.8(TESTS : Induced voltage )	-	22500	-
12.9(TESTS : Damp heat )	-	12500	-
12.1(TESTS : Stability test for relay operation)	-	5500	-
12.11(TESTS : Test for continuous operation )	-	12500	-
Clause 4(Cooling)	-	0	-
Clause 5(Rating)	-	100	-
Clause 6(Construction)	-	150	-
Clause 7.1(Protection Against Electric Shock)	-	22500	-
Clause 7.2(Leakage Current)	-	22500	-
Clause 7.3(Stability)	-	22500	-
Clause 7.4(Mechanical Strength)	-	22500	-
Clause 7.5(Provision for Earthing)	-	22500	-
Clause 7.6(Screws and Connections)	-	22500	-
Clause 7.7(Creepage Distances and Clearances)	-	22500	-
Clause 8(Limits Of Temperature rise)	-	7500	-
Clause 9(Performance Requirement)	-	5000	-
Clause 10(Terminal Marking)	-	150	-
Clause 11(Marking)	-	100	-
Clause 12.1(Classification of Tests)	-	0	-
Clause 12.2(Physical Examination)	-	150	-
Clause 12.3(Output Voltage Test)	-	2500	-
Clause 12.4(Insulation Resistance Test)	-	2500	-
Clause 12.5(High Voltage Test)	-	2500	-
Clause 12.6(No Load Current Test)	-	5000	-
Clause 12.7(Temperature-Rise Test)	-	7500	-
Clause 12.8(Induced Voltage Test)	-	5000	-
Clause 12.9(Damp Heat Test)	-	12500	-
Clause 12.10(Stability Test for Relay Operation)	-	5500	-
29 of IS 302:1979( SAFETY REQUIREMENTS : Creepage Distances)	-	500	-
Clause 12.11(Test for Continuous Operation)	-	12500	-

19 Mar, 2029

-
Included w.e.f 28.04.2025

5417

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14434 (2023)

POLYCARBONATE MOULDING AND EXTRUSION MATERIALS SPECIFICATION

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2.2(Filler Content)	-	1000	-
5(Melt Volume-Flow Rate (MVR))	-	1500	-
5.2(Specific Gravity)	-	1000	-
5.3(Flexural Modulus)	-	1500	-
5.4(Charpy Impact Strength, Notched)	-	1500	-
5.5(Deflection Temperature Under 1.82 MPa)	-	1500	-
5.6.1.2(Overall migration)	-	1000	-
4.2.5.2 Table 6 Sr.No.(i)(Volume resistivity)	-	0	-
4.2.5.2 Table 6 Sr.No.(ii)(Dielectric strength)	-	0	-
4.2.5(Flammability)	-	2000	-
4.2.5(Optical Properties(% Transmittance))	-	2500	-
4.2.5.2 Table 6 Sr.No.(ii)(Dielectric Constant)	-	0	-
4.2.5.2 Table 6 Sr.No.(ii)(Dissipation factor)	-	0	-
4.1(General)	-	1000	-
4.2.2.1(Data Block 2)	-	1000	-
4.2.2.2(Block 2)	-	1000	-
4.2.3(Data Block 3)	-	1000	-
4.2.4 (a)(Melt volume-flow rate)	-	1500	-
4.2.4 (b)(Specific gravity)	-	1000	-
4.2.4 (c)(Flexural modulus)	-	1500	-
4.2.4 (e)(Deflection temperature)	-	1500	-
4.2.5.2 Table - 6 (i)(Volume resistivity, Min, ohm-cm)	-	0	-
4.2.5.2 Table - 6 (ii)(Dielectric strength, Min, kV/mm)	-	0	-
4.2.5.2 Table - 6 (iii)(Dielectric constant at 1 MHz, Max)	-	0	-
4.2.5.2 Table - 6 (iv)(Dissipation factor at 1 MHz, Max)	-	0	-
5.6.1.1(Pigments and colourants)	-	3000	-
5.6.1.2(Overall migration)	-	1000	-
5.6.1.3(Storage and control)	-	200	-
6(Preparation of Test Specimens)	-	200	-
8(Packing and Marking)	-	200	-
4.2.4 (d)(Impact strength)	-	1500	-

-
Included w.e.f 23.07.2025 Scope restricted to Data Block 1,2,3&4 only

5418

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	1500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Power Input & Current)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
7(Marking/ Marking & Instructions)	-	200	-
6(Classification)	-	300	-
22.32(CONSTRUCTION)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5419

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	200	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15.1(Moisture Resistance)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 6(Classification- IS 302-1)	-	0	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	300	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	500	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	500	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	500	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	500	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	500	-
Cl. 24 IS 302-2-9(Components)	-	500	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-9(Construction )	-	500	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	500	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-9(Endurance)	-	500	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	500	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	500	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	500	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	500	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-9(Heating)	-	500	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	500	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
31(Resistance to rusting)	-	500	-
31(Resistance to rusting)	-	500	-
30.2.4(Resistance to heat and fire)	-	500	-
30.2(Resistance to heat and fire)	-	500	-
30.1(Resistance to heat and fire)	-	500	-
29.3(Clearances, creepage distances and solid insulation)	-	500	-
29.2(Clearances, creepage distances and solid insulation)	-	500	-
29.2(Clearances, creepage distances and solid insulation)	-	500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	500	-
28.2 to 28.4(Screws and connections)	-	500	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	500	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	200	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
8(Protection against access to live parts)	-	200	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	200	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	500	-
11(Temperature Rise/ Heating)	-	0	-
20.1(Stability and mechanical hazards)	-	500	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
31(Resistance to rusting)	-	0	-
31(Resistance to rusting)	-	0	-
30.2.4(Resistance to heat and fire)	-	0	-
30.2(Resistance to heat and fire)	-	0	-
30.1(Resistance to heat and fire)	-	0	-
29.3(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.2(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	0	-
28.2 to 28.4(Screws and connections)	-	0	-
28.1, Table No.-14(Screws and connections)	-	0	-
27.6(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
27.1 to 27.4(Provision for earthing)	-	0	-
26.10 & 26.11(Terminals for external conductors)	-	0	-
26.9(Terminals for external conductors)	-	0	-
26.1 to 26.8(Terminals for external conductors)	-	0	-
25.16 to 25.25(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.9 to 25.13(Supply connection and external flexible cords)	-	0	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	0	-
25.5 to 25.7(Supply connection and external flexible cords)	-	0	-
25.4(Supply connection and external flexible cords)	-	0	-
25.3(Supply connection and external flexible cords)	-	0	-
25.2(Supply connection and external flexible cords)	-	0	-
25.1(Supply connection and external flexible cords)	-	0	-
24.101(Components)	-	0	-
24.101(Components)	-	0	-
24.2 to 24.6(Components)	-	0	-
24.1(Components)	-	0	-
23.5(Internal wiring)	-	0	-
23.4(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
23.1 & 23.2(Internal wiring)	-	0	-
22.111(Constructions)	-	0	-
22.111(Constructions)	-	0	-
22.11o(Constructions)	-	0	-
22.109(Constructions)	-	0	-
22.108(Constructions)	-	0	-
22.101 to 22.107(Constructions)	-	0	-
22.13 to 22.48(Constructions)	-	0	-
22.12(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.11(Constructions)	-	0	-
22.7 to 22.10(Constructions)	-	0	-
22.6(Constructions)	-	0	-
22.5(Constructions)	-	0	-
22.4(Constructions)	-	0	-
22.3(Constructions)	-	0	-
22.2(Constructions)	-	0	-
22.1(Constructions)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.101(MECHANICAL STRENGTH)	-	0	-
21.2(MECHANICAL STRENGTH)	-	0	-
21.1(MECHANICAL STRENGTH)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
19.104(ABNORMAL OPERATION)	-	0	-
19.103(ABNORMAL OPERATION)	-	0	-
19.102(ABNORMAL OPERATION)	-	0	-
19.101(ABNORMAL OPERATION)	-	0	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16.3(Insulation resistance test)	-	0	-
16.3(Electric strength test)	-	0	-
16.1 & 16.2(Leakage current test)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.2(Moisture resistance)	-	0	-
15.1(Moisture resistance)	-	0	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	0	-
13.3 and Table No.- 4(Electric strength test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
13.1, 13.2(Leakage current test)	-	0	-
11.101(Heating)	-	0	-
11.1 to 11.8, Table No.-3(Heating)	-	0	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	0	-
8.1.5(Protection against access to live parts)	-	0	-
8.1.4(Protection against access to live parts)	-	0	-
8.1.3(Protection against access to live parts)	-	0	-
8.1.2(Protection against access to live parts)	-	0	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	0	-
7.14(Legibility & Durability of Markings test)	-	0	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
19(Abnormal Operation)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
15(Moisture Resistance)	-	0	-
14(Transient Over Voltage)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
11(Temperature Rise/ Heating)	-	0	-
10(Power Input & Current)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
23.6 to 23.10(Internal wiring)	-	0	-
8(Protection against access to live parts)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
28(Screws & Connections)	-	0	-
27(Provision For Earthing)	-	0	-
26(Terminals For External Conductors)	-	0	-
25(Supply Connection & External Flexible Cords)	-	0	-
24(Components)	-	0	-
23(Internal wiring)	-	0	-
22(Construction)	-	0	-
21(Mechanical strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5420

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

33800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	2000	-
Clause No - 6.2(harmfull ingress of water)	-	1500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	2000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	2000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	2000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	2000	-
Clause No -22.1(construction)	-	1500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	1500	-
Clause No -24.1.3(for switches)	-	500	-
Clause No -24.1.4(for automatic control)	-	500	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	500	-
Clause No -25.8, Table no -11(conductor resistance)	-	500	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1500	-
Clause No -30.101("incorporate combustible material")	-	2500	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
18(ENDURANCE)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	500	-
22(CONSTRUCTION)	-	500	-
24(COMPONENTS)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	500	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5421

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	1500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	-
18(ENDURANCE)	-	1500	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	200	-
21(MECHANICAL STRENGTH)	-	300	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	200	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	300	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	200	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	300	-
30(RESISTANCE TO HEAT AND FIRE)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5422

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	200	-
30.0(Resistance To Heat and Fire)	-	300	-
29.0(Creepage Distances and Clearances)	-	200	-
28.0(Screws and Connections)	-	300	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	500	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
15.0(Moisture resistance)	-	500	-
14.0(Transient Overvoltage)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
11.0(Heating)	-	800	-
10.0(Input and Current)	-	200	-
8.0(Protection against access to live parts)	-	200	-
7.0(Classification)	-	0	0
6.0(Marking and Instructions)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests)

5423

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	200	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	300	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	500	-
15.2(Moisture Resistance, IS 302-1)	-	0	-
15(Moisture Resistance, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.1(Abnormal Operation, IS 302-1)	-	0	-
19.101(Abnormal Operation)	-	0	-
19.102(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
20.101(Stability & Mechanical Hazards)	-	0	-
20.102(Stability & Mechanical Hazards)	-	0	-
20.103(Stability & Mechanical Hazards)	-	0	-
20.104(Stability & Mechanical Hazards)	-	0	-
20.105(Stability & Mechanical Hazards)	-	0	-
20.106(Stability & Mechanical Hazards)	-	0	-
20.107(Stability & Mechanical Hazards)	-	0	-
20.108(Stability & Mechanical Hazards)	-	0	-
20.109(Stability & Mechanical Hazards)	-	0	-
20.110(Stability & Mechanical Hazards)	-	0	-
20.111(Stability & Mechanical Hazards)	-	0	-
20.112(Stability & Mechanical Hazards)	-	0	-
20.113(Stability & Mechanical Hazards)	-	0	-
20.114(Stability & Mechanical Hazards)	-	0	-
20.115(Stability & Mechanical Hazards)	-	0	-
20.116(Stability & Mechanical Hazards)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	200	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22(Construction, IS 302-1)	-	300	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	1500	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27(Provision for Earthing, IS 302-1)	-	1500	-
27.2(Provision for Earthing, IS 302-1)	-	9	-
27.3(Provision for Earthing, IS 302-1)	-	9	-
27.4(Provision for Earthing, IS 302-1)	-	9	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	1500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	0	-
29(Clearances, Creepage distances and Solid Insulation)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15.1 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5424

Dashmesh Test Lab Private Limited

8186926

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

UPTO 1500MM

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	200	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	300	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	200	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	300	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	500	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	500	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	500	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	500	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	500	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	500	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	500	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	200	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	300	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	300	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	200	-
10.1(Speed Regulators)	-	0	500
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	500	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	500	-
13(Silent Operation)	-	500	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	500	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	500	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	500	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	0	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	0	-
8.1,b(Marking )	-	0	-
8.1,c(Marking )	-	0	-
8.1,d(Marking )	-	0	-
8.1,e(Marking )	-	0	-
8.1,f(Marking )	-	0	-
8.1,g(Marking )	-	0	-
8.2(Marking )	-	0	-
8.3(Marking )	-	0	-
8.3,a(Marking )	-	0	-
8.3,b(Marking )	-	0	-
8.3,c(Marking )	-	0	-
8.3,d(Marking )	-	0	-
8.3,e(Marking )	-	0	-
8.4(Marking )	-	0	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	-
6.2(Rating)	-	0	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.2(Speed Regulators)	-	0	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	0	-
10.5(Speed Regulators)	-	0	-
10.6(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	0	-
11.1(Starting)	-	0	-
11.2(Starting)	-	0	-
12(Interchangeability)	-	0	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.4(Measurement of Speed of the Fan )	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
15.1, 15.2(Air delivery and service value)	-	0	-
(Cl. 17 of IS 302-2-80 :2017)(Overload protection of transformers and associated circuits)	-	0	-
(Cl.4.4 of IS 374: 2019)(Bearings)	-	0	-
(Cl. 4.5 of IS 374: 2019)(Brushless DC Motor)	-	0	-
(Cl.4.6 of IS 374: 2019)(Enclosure)	-	0	-
(Cl. 7.6 of IS 302 Part 1)(Marking and Instructions)	-	0	-
Cl. 7.8 of IS 302-2-80 :2017(MARKING AND INSTRUCTIONS)	-	0	-
(Cl. 7.12 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.1 of IS 302-2-80 :2017)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.5 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.12.7 of IS 302-1: 2008(Marking and Instructions)	-	0	-
(Cl. 7.13 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 7.14 of IS 302-1: 2008)(Marking and Instructions)	-	0	-
(Cl. 10.1 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.3 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.4 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.7 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 10.8 of IS 374: 2019)(SPEED REGULATORS)	-	0	-
(Cl. 11.2 of IS 374: 2019)(STARTING)	-	0	-
(Cl. 13 of IS 374: 2019)(SILENT OPERATION)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 15.1 of IS 374: 2019)(PERFORMANCE REQUIREMENTS)	-	0	-
(Cl. 17 of IS 374: 2019(Test for Harmonic Distortion)	-	0	-
(Cl. 8.2 of IS 302-1: 2008)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	0	-
(Cl. 11 of IS 302-1: 2008)(HEATING)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 20.102 of IS 302-2-80 :2017)(STABILITY AND MECHANICAL HAZARDS)	-	0	-
(Cl. 22.2 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.14 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.21 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.22 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.41 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.44 of IS 302-1: 2008)(CONSTRUCTION)	-	0	-
(Cl. 22.101 of IS 302-2-80: 2017)(CONSTRUCTION)	-	0	-
(Cl. 23.1 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.2 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.4 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.5 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.6 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.7 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.9 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 23.10 of IS 302-1: 2008)(INTERNAL WIRING)	-	0	-
(Cl. 24.1 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 24.5 of IS 302-1: 2008)(COMPONENTS)	-	0	-
(Cl. 26.1 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.8 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.9 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 26.10 of IS 302-1: 2008)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
(Cl. 27.1 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.2 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.4 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 27.5 of IS 302-1: 2008)(PROVISION FOR EARTHING)	-	0	-
(Cl. 28.4 of IS 302-1: 2008)(SCREWS AND CONNECTIONS)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 30.2 of IS 302-1: 2008)(RESISTANCE TO HEAT AND FIRE)	-	0	-
(Cl. 32 of IS 302-1: 2008)(Radiation, toxicity and similar hazards)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 24.105 of IS IS 302-2-80 :2017)(COMPONENTS)	-	0	-
(Cl. 22.18 of IS 302-1: 2008)(Electric Ceiling type fan-Specification)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
Cl-9 (Cl-19.101 of IS 302-1)(Abnormal Operation)	-	0	-
(Cl. 15 of IS 302-1: 2008)(MOISTURE RESISTANCE)	-	0	-
(Cl. 15 of IS 302-1: 2008.(MOISTURE RESISTANCE)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 17 of IS 302-1: 2008)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19 of IS 302-2-80 :2017)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.7 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
(Cl. 19.13 of IS 302-1: 2008)(ABNORMAL OPERATION)	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5425

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	4000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	1500	-
17.0(Functional Safety)	-	2000	-
18.0(Changeover Operation)	-	1500	-
19.0(High Temperature Operation)	-	1500	-
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	1500	-
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	1500	-
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	1500	-

13 Dec, 2026

-
Included w.e.f 19.05.2025

5426

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	10000	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	2500	-
11(Transverse Tension Test,%)	-	2500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	2500	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	1500	-
14(Reverse Flattaning Test)	-	1500	-
15(Flattaning Test-IS 2328)	-	1500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	5000	-
18(Leak Tighteness Test)	-	1500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	1000	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	1000	-
22(Workmanship, Finish and Appearance)	-	500	-
23(Repair by Welding or Grinding)	-	500	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	1000	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	1000	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	1000	-
Clause 10.1 - Table 4(Tensile Strength)	-	2500	-
Clause 10.1 - Table 4(Yield Strength)	-	2500	-
Clause 10.1 - Table 4(Percent Elongation)	-	2500	-
Clause 11(Transverse Tension Test)	-	2500	-
Clause 12(Hardness Test)	-	2500	-
Clause 13(Flange Test)	-	1500	-
Clause 14(Reverse Flattening Test)	-	1500	-
Clause 15(Flattening Test)	-	1500	-
Clause 16(Grain Size)	-	5000	-
Clause 18()	-	1500	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	1000	-
Clause 22(Workmanship, Finish & Appearance)	-	500	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	1000	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	1000	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	1000	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	1000	-
12.2(Hardness test)	-	2500	-
17(Sampling)	-	500	-
25(Marking)	-	500	-
6.7, Table 7, ii)(c) Chromium VI)	-	1000	-

-
Included w.e.f 11.07.2025

5427

Sleen India Biz venture Private Limited, Agra

9139736

IS 2833 (2019)

Aniline, technical - Specification (Second Revision)

Industrial Chemical-Aniline

11200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	500	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	1000	-
Cl.2.2.2(Crystallizing Point)	-	1000	-
Cl.2.2.3(Distillation Range)	-	2000	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	3500	-
Cl.2.2.4(Assay, percent by GC)	-	0	Testing charges already mentioned above (at Assay, percent by Nitrite value) i.e. Rs 3500/-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	2500	-
Cl.2.2.6(Moisture content, percent by mass)	-	700	-
Cl.2.1(Description)	-	0	Repeated Clause
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	Repeated Clause
Cl.2.2.2(Crystallizing Point)	-	0	Repeated Clause
Cl.2.2.3(Distillation Range)	-	0	Repeated Clause
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	Repeated Clause
Cl.2.2.4(Assay, percent by GC)	-	0	Repeated Clause
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	Repeated Clause
Cl.2.2.6(Moisture content, percent by mass)	-	0	Repeated Clause
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-

-
Included w.e.f 11.07.2025

5428

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

All

330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	55000	-
7(Cooling Capacity Test)	-	40000	-
8(Freezing Capacity Test)	-	40000	Testing Charges for DC refrigerator :Nil
9("Automatic Ice-Making Capacity Test")	-	40000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	40000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	40000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	40000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	40000	-
6(Storage Test)	-	0	-
7(Cooling Capacity Test)	-	0	-
8(Freezing Capacity Test)	-	0	-
9("Automatic Ice-Making Capacity Test")	-	0	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	0	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	0	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	0	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	0	-

08 Feb, 2027

-
Included w.e.f 29.04.2025

5429

KPML Low Voltage Rotating Machine and Hydraulic Laboratory Karad Projects and motors Limited

7187626

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

Submersible Motors(0.37KW to 75KW)

21205 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Construction, IS 9283)	-	10000	-
5.1.1(Construction, IS 9283)	-	10000	-
5.1.2(Construction, IS 9283)	-	10000	-
5.1.3(Construction, IS 9283)	-	10000	-
5.1.4(Construction, IS 9283)	-	10000	-
5.2.1(Earthing, IS 9283)	-	5000	-
5.2.2(Earthing, IS 9283)	-	5000	-
5.2.3(Earthing, IS 9283)	-	5000	-
5.2.4(Earthing, IS 9283)	-	5000	-
5.2.5(Earthing, IS 9283)	-	5000	-
13(Terminal Markings, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.1(Marking, IS 9283)	-	5000	-
15.3(Marking, IS 9283)	-	5000	-
19(Temperature rise test, IS 9283)	-	21205	-
19(Temperature rise test, IS 9283)	-	21205	-
20(High Voltage test, IS 9283)	-	5000	-
21(Insulation Resistance test, IS 9283)	-	5000	-
22(Speed, IS 9283)	-	21205	-
23(Leakage Current test, IS 9283)	-	5000	-
16.1(c)(Measurement of Stator Resistance)	-	5000	-
16.1(d)(No Load Test)	-	10000	-
16.1(e)(Reduced Voltage running up Test)	-	5000	-
16.1(f)(Locked Rotor test)	-	5000	-
16.1(g)(Full Load Test)	-	21205	-
16.1m(Momentary over-load test)	-	21205	-
16.1 (h)(Performance Characteristics)	-	21205	-
16.2 ( a)(Insulation Resistance)	-	5000	-
16.2 ( b)(Voltage, Time)	-	5000	-
16.2 (c)(Voltage, Current, Power, Frequency, Speed)	-	21205	-
16.2 (d)(Voltgae, Current, Power, Torque)	-	21205	-
16.2 (e)(Voltage, Frequency, Speed)	-	21205	-
5.3(Foreign Matter, IS 9283)	-	500	-
5.5(Finish of Bearings, IS 9283)	-	1000	-
7.1(Dimensions of Motors, IS 9283)	-	2000	-
7.2.1(Tolerances, IS 9283)	-	500	-
7.2.2(Tolerances, IS 9283)	-	500	-
8(Type of duty, IS 9283)	-	500	-
17.1(Performance values, IS 9283)	-	10000	-
17.1(Performance values, IS 9283)	-	10000	-
17.1(Performance values, IS 9283)	-	10000	-
17.1(Performance values, IS 9283)	-	10000	-

26 Aug, 2028

-
Exclusion: Cl 5.6 (Balancing of Rotor, IS 9283), Cl 18.1 (Overload test, IS 9283)

5430

Sleen India Biz venture Private Limited, Agra

9139736

IS 695 (2020)

Acetic Acid — Specification ( Fourth Revision )

Industrial Chemical-Acitic Acid

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - Sl No - xiv(Water content - IS 2362)	-	800	-
4.3 - Table 1 - Sl No - xiii( Oxidizable impurities - Annex A 11)	-	900	-
4.3 - Table 1 - Sl No - xii(Acetaldehyde (CH3CHO) - Annex A 10)	-	900	-
4.3 - Table 1 - Sl No - xi(Formic acid (HCOOH)- Annex A 9)	-	1000	-
4.3 - Table 1 - Sl No - x(Heavy metals [(including iron) calculated as Pb] - Annex A 8)	-	800	-
4.3 - Table 1 - Sl No - ix(Sulphate (as SO4) - Annex A 7)	-	800	-
4.3 - Table 1 - Sl No - viii(Iron (as Fe) - Annex A 6)	-	800	-
4.3 - Table 1 - Sl No - vii(Chloride (as Cl) - Annex A 5)	-	800	-
4.3 - Table 1 - Sl No - vi(Residue on evaporation - Annex A 4)	-	1000	-
4.3 - Table 1 - Sl No - v(Crystallizing point - Annex A 3)	-	1000	-
4.3 - Table 1 - Sl No - iv(Acetic acid content (CH3COOH) - Annex A2)	-	1000	-
4.3 - Table 1 - Sl No - iii(Colour - IS 8768)	-	600	-
4.3 - Table 1 - Sl No - ii(Relative density at 27/27 ℃ - Cl 6 of IS 82)	-	1000	-
4.3 - Table 1 - Sl No - i(Solubility in water - Annex A 1)	-	600	-
4.2.2(Description)	-	500	-
4.1(Description)	-	0	Test price for clause 4.1 is 500/-.

-
Included w.e.f 28.05.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number