BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5461

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Heat Treatment)	-	2500	For dimension and other qualitative tests
Cl 9(Tensile & Hardness)	-	6000	For mechanical tests.
Cl 10(Diameter & Out Of Round)	-	2500	For dimension and other qualitative tests
Cl 8(Heat Treatment)	-	2500	For dimension and other qualitative tests
Cl 9(Tensile & Hardness)	-	5999.98	For mechanical tests.
Cl 10(Diameter & Out Of Round)	-	2500	For dimension and other qualitative tests
Cl 8(Heat Treatment)	-	2499.99	For dimension and other qualitative tests
Cl 9(Tensile & Hardness)	-	6000	For mechanical tests.
Cl 10(Diameter & Out Of Round)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 20 mm (Out of round)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	2500	For dimension and other qualitative tests
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	2500	For dimension and other qualitative tests
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	5999.98	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	5999.98	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	5999.98	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(0.2% Proof Stress)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Hardness)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(%Elongation)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	6000	For mechanical tests.
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	6000.01	For mechanical tests.
8(Steel Wire rod may be supplied in the annealed condition.)	-	2500	For dimension and other qualitative tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Niobium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	6499.99	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	6499.99	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Niobium)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Carbon)	-	6499.99	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	6499.97	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	6499.99	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Chromium)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	6499.98	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Molybdenum)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Aluminium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	6500	For chemical tests
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	6500	For chemical tests
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	2500	For dimension and other qualitative tests
Cl. 10.1(Out of Round)	-	2500	For dimension and other qualitative tests
Cl. 9.2 Table 4(Hardness)	-	6000	For mechanical tests
Cl. 9 .1 Table 3(Elongation)	-	6000	For mechanical tests
Cl. 9 .1 Table 3(0.2 % Proof Stress )	-	6000	For mechanical tests
Cl. 6(Freedom from defects)	-	2500	For dimension and other qualitative tests
Cl 10(Diameter & Out Of Round)	-	2500	For dimension and other qualitative tests
Cl 9(Tensile & Hardness)	-	6000	For mechanical tests
Cl 8(Heat Treatment)	-	2500	For dimension and other qualitative tests
Cl 8(Heat Treatment)	-	2500	For dimension and other qualitative tests
Cl 9(Tensile & Hardness)	-	6000	For mechanical tests
Cl 10(Diameter & Out Of Round)	-	2500	For dimension and other qualitative tests
13(Corrosion resistance-IS 10461,Part-1 & 2)	-	2500	For dimension and other qualitative tests
13(Corrosion Resistance - IS 10461)	-	2500	For dimension and other qualitative tests
15(Marking)	-	2500	For dimension and other qualitative tests

-
Included w.e.f 23.06.2025

5462

BIS, Central Laboratory (CL)

None

IS 15558 (2024)

INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-
Cl-5.1 (water heater)	-
Cl-5.2 (copper and copper alloy)	-
Cl-5.3 (Non-metallic materials)	-
Cl-5.4 (Mixing tube and burner head)	-
Cl-6.3 (All Water connections)	-
Cl-6.4 (water inlet and outlet connections)	-
Cl-6.6 (Gas Inlet Connections)	-
Cl-7 (Flame visibility)	-
Cl-8 (Gas Taps)	-
Cl-9 (Flame failuse device)	-
Cl-11 (Protection against accidental overheating)	-
Cl-13 (General condition of test)	-
Cl-14 (Gas Soundness)	-
Cl-15 (Water Soundness)	-
Cl-16 (Thermal efficiency)	-
Cl-17 (carbon monoxide/carbon dioxide)	-
Cl-18 (Gas Consumption)	-
Cl-19 (Ignition and flame travel)	-
Cl-20 (FLAME STABILITY)	-
Cl-21 (NOISE CONTROL)	-
Cl-22 (FLASH-BACK)	-
Cl-24 ("FIRE HAZARDS AND LIMITING TEMPERATURE")	-
Cl-25 (TIME FOR TEMPERATURE RISE)	-
Cl-26 (HOT WATER OUTPUT TEST)	-

-
-

5463

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5856 (2022)

Welding consumables Wire electrodes strip electrodes wires and rods for arc welding of stainless and heat resisting steels Classification (Third Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0 Table 1(Carbon)	-	8500	For chemical tests
6.0 Table 1(Sulphur)	-	8500	For chemical tests
6.0 Table 1(Phosphorus)	-	8500	For chemical tests
6.0 Table 1(Manganese)	-	8500	For chemical tests
6.0 Table 1(Silicon)	-	8500	For chemical tests
6.0 Table 1(Nitrogen)	-	8500	For chemical tests
6.0 Table 1(Copper)	-	8500	For chemical tests
6.0 Table 1(Titanium)	-	8500	For chemical tests
6.0 Table 1(Aluminium)	-	8500	For chemical tests
6.0 Table 1(Niobium)	-	8500	For chemical tests
6.0 Table 1(Nickel)	-	8500.04	For chemical tests
6.0 Table 1(Chromium)	-	8500.03	For chemical tests
6.0 Table 1(Molybdenum)	-	8500.03	For chemical tests
6.0 Table 1(Tungsten)	-	8500	For chemical tests
6.0 Table 1(Vanadium)	-	8500	For chemical tests
5.0 Annex A(proof strength)	-	13500.02	For mechanical tests
5.0 Annex A(Tensile strength)	-	13500.01	For mechanical tests
5.0 Annex A(Elongation)	-	13500	For mechanical tests

-
Included w.e.f 23.06.2025

5464

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 10702 (2023)

Hawai Chappal-Specification

34800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	250	-
4.2(Length)	-	500	-
4.3(Thickness)	-	500	-
4.4 , Table No. 1 , i)(Density)	-	500	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	800	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1200	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1200	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	500	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	800	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	250	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	250	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	800	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	25000	-
6(MARKING AND PACKING)	-	250	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl.No. 5.2(lead content)	-	1000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	250	-
Clause 4.1 - 4.1.2(Strap Material)	-	250	-
Clause 4.1 - 4.1.3(Material)	-	250	-
Clause 4.1 - 4.1.4(Material)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.3 - 4.3.1(Thickness)	-	500	-
Clause 4.3 - 4.3.2(Thickness)	-	500	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	500	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	800	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1200	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	500	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	500	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	800	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	800	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	800	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	250	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	250	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	250	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	250	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	800	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	800	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	800	-
Cl-4 ((Amendment No-1)(Category And Type)	-	250	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	800	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1200	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1200	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	25000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	800	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	25000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	800	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-

-
Included w.e.f 04.08.2025

5465

Samridhi Test House Pvt. Ltd.

8184706

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

Household Refrigerating Appliances- Refrigerators

320000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	54000	-
7(Cooling Capacity Test)	-	38000	-
8(Freezing Capacity Test)	-	36000	-
9("Automatic Ice-Making Capacity Test")	-	36000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	39000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	39000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	39000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	39000	-

-
-

5466

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	3500	For dimensional and other qualitative test
As per clause 7(CARBON)	-	6500	For chemical test
As per clause 7(SILICON)	-	6500	For chemical test
As per clause 7(MANGANESE)	-	6500	For chemical test
As per clause 7(PHOSPHORUS)	-	6499.99	For chemical test
As per clause 7(SULPHUR)	-	6500	For chemical test
As per clause 7(CHROMIUM)	-	6500	For chemical test
As per clause 7(MOLYBEDNUM)	-	6500	For chemical test
As per clause 7(NICKEL)	-	6500	For chemical test
As per clause 7(NITROGEN)	-	6500	For chemical test
As per clause 7(COPPER)	-	6500	For chemical test
As per clause 7(NIOBIUM)	-	6499.98	For chemical test
As per clause 7(TITANIUM)	-	6500	For chemical test
As per clause 7(ALUMINIUM)	-	6500	For chemical test
As per clause 8(HEAT TREATMENT)	-	3500	For dimensional and other qualitative test
As per clause 9(Dimension Tolerance)	-	3500	For dimensional and other qualitative test
As per clause 10(TENSILE TEST)	-	5000	For mechanical tests
As per clause 10.2(REVERSE BEND TEST)	-	5000	For mechanical tests
As per clause 10.3(TORSION TEST)	-	5000	For mechanical tests
As per clause 14(FINISH)	-	3500	For dimensional and other qualitative test
As per clause 15(CORROSION RESISTANCE)	-	5000	For mechanical tests
As per clause 16.2(MARKING)	-	3500.02	For dimensional and other qualitative test

-
Included w.e.f 23.06.2025

5467

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

Bottles, Jars, Cups

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	600	Complete Testing Charges- Rs 18,000 + GST (10 % Discount to BIS Complete Testing)
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	100	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	100	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	100	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	100	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	100	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	500	-
Clause 4.2(Design, Shape and Dimensions)	-	150	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	-
Clause 4.4(Capacity (Nominal))	-	300	-
Clause 4.4(Capacity (Brimfull))	-	300	-
Clause 4.5(Wall Thickness Top)	-	150	-
Clause 4.5(Wall Thickness Middle)	-	150	-
Clause 4.5(Wall Thickness Bottom)	-	150	-
Clause 4.6.1.1(Colour-Transparency)	-	300	-
Clause 4.6.1.2(Colour-Tint)	-	300	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	300	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	300	-
Clause 4.6.3.1(Drop Impact test)	-	350	-
Clause 4.6.3.2(Stack Load test)	-	750	-
Clause 4.6.4.1(Overall Migration Container)	-	500	-
Clause 4.6.4.1(Overall Migration Closure)	-	500	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	875	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	875	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	875	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	875	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	875	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	875	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Repeated Parameter
Clause 4.6.4.3(Colour migration Container)	-	875	-
Clause 4.6.4.3(Colour migration Closure)	-	875	-
Clause 4.6.5(Water Potability Test (Taste))	-	1500	-
Clause 4.6.5(Water Potability Test (odour))	-	1500	-
Clause 5.1(Marking)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	875	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	600	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	100	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	100	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	100	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	600	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	600	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	600	-
Clause 4.2(Design, Shape and Dimensions)	-	150	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	-
Clause 4.4(Capacity (Nominal))	-	300	-
Clause 4.4(Capacity (Brimfull))	-	300	-
Clause 4.5(Wall Thickness Top)	-	150	-
Clause 4.5(Wall Thickness Middle)	-	150	-
Clause 4.5(Wall Thickness Bottom)	-	150	-
Clause 4.6.1.1(Colour-Transparency)	-	300	-
Clause 4.6.1.2(Colour-Tint)	-	300	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	300	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	300	-
Clause 4.6.3.1(Drop Impact test)	-	350	-
Clause 4.6.3.2(Stack Load test)	-	750	-
Clause 4.6.4.1(Overall Migration Container)	-	500	-
Clause 4.6.4.1(Overall Migration Closure)	-	500	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	875	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	875	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	875	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	875	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	875	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	875	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	875	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	875	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	875	-
Clause 4.6.4.3(Colour migration Container)	-	875	-
Clause 4.6.4.3(Colour migration Closure)	-	875	-
Clause 4.6.5(Water Potability Test (Taste))	-	1500	-
Clause 4.6.5(Water Potability Test (odour))	-	1500	-
Clause 5.1(Marking)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	875	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	Repeated Parameter
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	Repeated Parameter
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	Repeated Parameter
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	Repeated Parameter
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	Repeated Parameter
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	Repeated Parameter
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	Repeated Parameter
Clause 4.2(Design, Shape and Dimensions)	-	0	Repeated Parameter
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	Repeated Parameter
Clause 4.4(Capacity (Nominal))	-	0	Repeated Parameter
Clause 4.4(Capacity (Brimfull))	-	0	Repeated Parameter
Clause 4.5(Wall Thickness Top)	-	0	Repeated Parameter
Clause 4.5(Wall Thickness Middle)	-	0	Repeated Parameter
Clause 4.5(Wall Thickness Bottom)	-	0	Repeated Parameter
Clause 4.6.1.1(Colour-Transparency)	-	0	Repeated Parameter
Clause 4.6.1.2(Colour-Tint)	-	0	Repeated Parameter
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	Repeated Parameter
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	Repeated Parameter
Clause 4.6.3.1(Drop Impact test)	-	0	Repeated Parameter
Clause 4.6.3.2(Stack Load test)	-	0	Repeated Parameter
Clause 4.6.4.1(Overall Migration Container)	-	0	Repeated Parameter
Clause 4.6.4.1(Overall Migration Closure)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	Repeated Parameter
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Repeated Parametervv
Clause 4.6.4.3(Colour migration Container)	-	0	Repeated Parameter
Clause 4.6.4.3(Colour migration Closure)	-	875	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	Repeated Parameter
Clause 4.6.5(Water Potability Test (odour))	-	0	Repeated Parameter
Clause 5.1(Marking)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	875	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-

-
Included w.e.f. 17.10.2025

5468

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1()	-	3000	For dimensional and other qualitative test
4.1(Construction)	-	3000	For dimensional and other qualitative test
4.2(Materials)	-	3500	For chemical test
4.3(Selection and Size)	-	3000	For dimensional and other qualitative test
4.4(Position of handle and knob with respect to cookware)	-	3000	For dimensional and other qualitative test
4.()	-	3000	For dimensional and other qualitative test
4.5(Attachment to cookware)	-	3000	For dimensional and other qualitative test
4.()	-	3000	For dimensional and other qualitative test
5.1(General)	-	3000	For dimensional and other qualitative test
5.2(Bending strength)	-	5500	For mechanical test
5.3(Torque strength)	-	5500	For mechanical test
5.4(Impact strength)	-	5500	For mechanical test
5.5(Fatigue resistance)	-	5500	For mechanical test
5.6(Leakage)	-	5500	For mechanical test
5.7(Thermal insulation)	-	5500	For mechanical test
5.8(Heat resistance)	-	5500	For mechanical test
5.9(Washing resistance)	-	5500	For mechanical test
5.10(Burning resistance)	-	5500	For mechanical test

-
Included w.e.f 23.06.2025

5469

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 13893 (1994)

Polyurethane soles semirigid - specification

4999 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	1000	-
4.3(Ross Flex test)	-	1500	-
4.3(Flexural strength )	-	1500	-
4.3(Abrasion Resistance)	-	1500	-
4.3(Elongation at break)	-	800	-
4.3(Tensile Strength )	-	800	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	250	-
4.1(Design)	-	250	-
5, 5.1, 5.2(Packing And Marking)	-	250	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	250	-
4.2 (Amendment 2)(Thickness)	-	250	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	1500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	800	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	800	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	800	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-

-
Included w.e.f.12.09.2025

5470

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	1500	For dimension and other qualitative tests
Cl-5(Manufacturer)	-	1500	For dimension and other qualitative tests
Cl-6(Aluminium for use as matrix)	-	8500	For chemical test
Cl-6(Top-surface of the aluminium matrix)	-	8500	For chemical test
Cl-6(Bottom-surface of the aluminium matrix)	-	8500	For chemical test
Cl-7.1.1(Tensile properties)	-	5000	For mechanical tests
Cl-7.1.1(Apparent Yield Strength)	-	5000	For mechanical tests
Cl-7.1.1(Tensile Strength Mpa,)	-	5000	For mechanical tests
Cl-7.1.2(Test Specimen)	-	1500	For dimension and other qualitative tests
Cl-7.1.3(Test Parameters)	-	1500.02	For dimension and other qualitative tests
Cl-7.2.1(Bond strength of Tri-Ply)	-	5000	For mechanical test
Cl-7.2.2(Sample Preparation and Test Specimen)	-	1500.02	For dimension and other qualitative tests
Cl-7.2.3(Test Apparatus)	-	1500.03	For dimension and other qualitative tests
Cl-7.2.4(Procedure)	-	1500	For dimension and other qualitative tests
Cl-8.1(Sample of suitable size)	-	1500	For dimension and other qualitative tests
Cl-8.2(specimen for peel strength)	-	5000.03	For mechanical test
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	5000.03	For mechanical test
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	5000	For mechanical test
Cl-9.1(Thickness)	-	1500	For dimension and other qualitative tests
Cl-9.2(Diameter)	-	1500	For dimension and other qualitative tests
Cl-9.3(Flatness)	-	1500.02	For dimension and other qualitative tests
Cl-10(surface finish)	-	1500.02	For dimension and other qualitative tests
Cl-11(Workmanship, finish and appearance)	-	1500.03	For dimension and other qualitative tests
Cl-14(Marking)	-	1500	For dimension and other qualitative tests

-
Included w.e.f 23.06.2025

5471

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 5852 : Part 2 (2019)

Toe Caps for Protection of Feet Ã¢â‚¬â€ Specification Part 2 Non-Metallic Toe Caps

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Internal length)	-	250	-
4.3.2(Width of flange)	-	250	-
4.4(Impact resistance)	-	1500	-
4.5(Compression resistance)	-	1500	-
5.5.2(Effect of high temperature)	-	1500	-
5.5.3(Effect of low temperature)	-	1500	-
5.5.4(Effect of fuel oil)	-	1500	-
6(Marking)	-	250	-
4.3.1(Internal length)	-	0	-
4.3.2(Width of flange)	-	0	-
4.4(Impact resistance)	-	0	-
4.5(Compression resistance)	-	0	-
5.5.2(Effect of high temperature)	-	0	-
5.5.3(Effect of low temperature)	-	0	-
5.5.4(Effect of fuel oil)	-	0	-
6(Marking)	-	0	-
4.3.1(Internal length)	-	-	-
4.3.2(Width of flange)	-	-	-
4.4(Impact resistance)	-	-	-
4.5(Compression resistance)	-	-	-
5.5.2(Effect of high temperature)	-	-	-
5.5.3(Effect of low temperature)	-	-	-
5.5.4(Effect of fuel oil)	-	-	-
6(Marking)	-	-	-

-
Included w.e.f. 21.08.2025

5472

Samridhi Test House Pvt. Ltd.

8184706

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

Household Refrigerating Appliances- Refrigerators

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	2000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	11000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	3000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	7000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	25000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	9000	-
14(Ice-Making Test (If Applicable))	-	25000	-
15(Test For Absence Of Odour And Taste)	-	41000	-
16(Safety Requirements)	-	50000	-

-
-

5473

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 15960 (2013)

Composite bottom stainless steel cooking utensils - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material - manufacture of utensils)	-	2500	For dimensional and other qualitative tests
3.1.1.1(Material - electrolytic copper)	-	8500	For chemical test
3.1.1.2(Material - copper cladding)	-	8500	For chemical test
3.1.1.3(Material – aluminium cladding)	-	8500	For chemical test
3.1.2(Material - protector plate)	-	2500	For dimensional and other qualitative tests
3.1.2.1(Material – copper core)	-	8500	For chemical test
3.1.2.2(Material – aluminium core)	-	8500	For chemical test
3.2(Material – Rivets, legs and other fittings)	-	2500	For dimensional and other qualitative tests
3.3(Material – screw)	-	2500	For dimensional and other qualitative tests
3.4(Material – handle and knob)	-	2500	For dimensional and other qualitative tests
3.5(Material – corrosion Resisting/ non-ferrous/ plastic)	-	4000.02	For mechanical and thermal test
4(Material Thickness)	-	2500	For dimensional and other qualitative tests
5(Dimensions of Utensil)	-	2500	For dimensional and other qualitative tests
6(Workmanship)	-	2500	For dimensional and other qualitative tests
7.1(Tests - Coating Thickness Test)	-	2500.02	For dimensional and other qualitative tests
7.2 & 7.2.1(Tests - Adhesion Test - Mechanical Shock Test)	-	4000	For mechanical and thermal shock test
7.2.2(Tests - Thermal Shock Test)	-	4000	For mechanical and thermal shock test
7.2.3(Tests - Dry Heat Test)	-	2500	For dimensional and other qualitative tests
7.3(Staining Test)	-	2500	For dimensional and other qualitative tests
10(Marking)	-	2500	For dimensional and other qualitative tests

-
Included w.e.f 23.06.2025

5474

Central Power Research Institute (CPRI), Bangalore

6101024

IS 13340 : PART 1 (2024)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation (Second Revision)

618070 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance measurement and output calculation)	-	8640	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	8640	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
9(Voltage tests between terminals)	-	1280	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
10(Voltage tests between terminals and container)	-	1000	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
11(Voltage tests between terminals and container)	-	1000	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
12(Sealing test)	-	1560	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
13(Thermal stability test)	-	125710	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
14("Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature")	-	6800	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
7(Capacitance measurement and output calculation)	-	8640	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
15(Lightning impulse voltage test between terminals and container)	-	8640	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
16(Discharge test)	-	21600	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
17(Ageing test)	-	278990	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
18(Self-healing test)	-	5140	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
19(Destruction test)	-	139610	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
20(Maximum permissible voltage)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
20.1(Long-duration voltages)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
20.2(Long-duration voltages)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
21(Maximum permissible current)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
22(Discharge device)	-	820	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
23("Container connections ")	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
24(Protection of the environment)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
25(Other safety requirements)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
26(Marking of the unit)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
26.1(Rating plate)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
26.2(Standardized connection symbols)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
26.3(Warning plate)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
27(Marking of the bank)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
27.1(Instruction sheet or rating plate)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
27.2(Warning plate)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
28(General)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
29(9 Choice of the rated voltage)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
30(Operating temperature)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
31(Special service conditions)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
32(2 Overvoltages)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
33(Overload currents)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
34(Switching and protective devices and connections)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
36(Capacitors connected to systems with audio-frequency remote control)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
36(Capacitors connected to systems with audio-frequency remote control)	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.
37(Electromagnetic compatibility (EMC))	-	0	Test charges are dependant on the kvar rating of the test sample and the complete test charges applicable, will be intimated through a proforma invoice on receipt of the test request.

31 Dec, 2026

-
Included w.e.f.03.07.2025

5475

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

270000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	2500	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Type Test and Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	25000	-
7.2(Intended Use)	-	110000	-
7.3(Reasonably foreseeable misuse)	-	100000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	25000	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	7500	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

24 Sep, 2026

-
Included w.e.f.03.07.2025 Exclusion : Clause 7.3.1 of IS 16047: Part 3

5476

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	250	-
4/4.1(REQUIREMENTS- Finishing)	-	250	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	250	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1500	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1000	-
4.1(Finishing)	-	250	-
4.2.1 - 1(Minimum internal length in mm)	-	250	-
4.2.2(Width of Flange)	-	250	-
4.3(Impact Resistance)	-	1500	-
4.4(Compression Resistance)	-	1500	-
4.5(Corrosion Resistance)	-	1000	-
5(Marking)	-	250	-
6(Packing)	-	250	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	0	-
4/4.1(REQUIREMENTS- Finishing)	-	0	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	0	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	0	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	0	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	0	-
4.1(Finishing)	-	0	-
4.2.1 - 1(Minimum internal length in mm)	-	0	-
4.2.2(Width of Flange)	-	0	-
4.3(Impact Resistance)	-	0	-
4.4(Compression Resistance)	-	0	-
4.5(Corrosion Resistance)	-	0	-
5(Marking)	-	0	-
6(Packing)	-	0	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	-	-
4/4.1(REQUIREMENTS- Finishing)	-	-	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	-	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	-	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	-	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	-	-
4.1(Finishing)	-	-	-
4.2.1 - 1(Minimum internal length in mm)	-	-	-
4.2.2(Width of Flange)	-	-	-
4.3(Impact Resistance)	-	-	-
4.4(Compression Resistance)	-	-	-
4.5(Corrosion Resistance)	-	-	-
5(Marking)	-	-	-
6(Packing)	-	-	-

-
Included w.e.f. 21.08.2025

5477

Indian Institute of Packaging (IIP), Mumbai

7118404

IS 16058 (2024)

Dunnage pallets made from recycled packaging wastes for warehousing application - Specification (First Revision)

43306.00 View breakup
-

Clause No.	Exclusion	Remark
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
14(Conditioning)	-	-
Cl-8.1.1(Nails)	-	-
Cl-8.1.2(Threaded Nail)	-	-
Cl-8.1.3(Ring Nail)	-	-
Cl-8.1.4(Interrupted Thread Nail)	-	-
Cl-8.1.5(Collated Nail)	-	-
Cl-8.1.6(Screw)	-	-
Cl-8.2(Requirements for Fasteners)	-	-
Cl-11.1(Dimensions of Pallet Type “A-1”)	-	-
Cl-11.1.1(Dimensions of Top Plank of Pallet Type “A-1”)	-	-
Cl-11.2(Dimensions of Pallet Type “A-2”)	-	-
Cl-11.2.1(Dimensions of Top Plank of Pallet Type “A-2”)	-	-
Cl-11.3(Dimensions of Pallet Type “B”)	-	-
Cl-11.3.1(Dimensions of Top Plank of Pallet Type “B”)	-	-
Cl-11.3.2(Dimensions of Bottom Support Plank of Pallet Type “B”)	-	-
Cl-12(Workmanship)	-	-
Cl-13(Finish)	-	-
Cl-15.1(Stacking Test Using Static Load)	-	-
Cl-15.2(Vertical Impact Drop Test)	-	-
Cl-15.3(Corner Drop Test)	-	-
Cl-15.4(Hammer Test)	-	-
Cl-15.5(Load Bearing Test)	-	-
Cl-16(Routine Tests)	-	-
Cl-17.1 (i)(Density (kg/m³))	-	-
Cl-17.2 (ii)(Tensile stress at proportional limits (kg/cm2))	-	-
Cl-17.2 (iii)(Tensile stress at maximum load (kg/cm2))	-	-
Cl-17.2 (iv)(Modulus of elasticity in tension parallel to grain (kg/cm²))	-	-
Cl-17.2 (v)(F alling impact strength, minimum height of fall (cm))	-	-
Cl-17.2 (vi)(Compression parallel to surface test (Min), (kg/cm²))	-	-
Cl-17.3 (i)(Moisture (percent, Max))	-	-
Cl-17.3 (ii)(Water absorption 2 h (percent, Max))	-	-
Cl-17.3 (iii)(Water absorption 24 h (percent, Max))	-	-
Cl-17.3 (iv)(Acidity and alkalinity resistance test)	-	-
Cl-20(Marking)	-	-
14(Conditioning)	-	-

30 Jun, 2028

-
Included w.e.f 29.07.2025

5478

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For chemical tests
6(Freedom From Defects)	-	1500	For dimensional and other qualitative tests
9.3(Tensile Test-1608:Part 1)	-	2500	For mechanical test
9.3, Table 3 (Yield Strength, Mpa)	-	2499.98	For mechanical test
9.3, Table 3 (Tensile Strength, Mpa)	-	2499.99	For mechanical test
9.3, Table 3 (Elongation, %)	-	2500	For mechanical test
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	1500	For dimensional and other qualitative tests
11(Surface finish)	-	1499.98	For dimensional and other qualitative tests
12(Dimensions)	-	1500	For dimensional and other qualitative tests
14.1(Thickness,mm)	-	1500	For dimensional and other qualitative tests
14.2( Width, mm)	-	1500	For dimensional and other qualitative tests
14.3(Length, mm)	-	1500	For dimensional and other qualitative tests
14.4(Flatness, mm)	-	1500	For dimensional and other qualitative tests
14.5(Camber, mm)	-	1500	For dimensional and other qualitative tests
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	2500	For mechanical tests
17(Marking)	-	1500	For dimensional and other qualitative tests
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	2500	For mechanical tests
4.1(General requirements)	-	1499.98	For dimensional and other qualitative tests
6(Freedom from defects)	-	1500	For dimensional and other qualitative tests
7(Heat treatment)	-	1500	For dimensional and other qualitative tests
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	3500	For chemical test
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	3499.98	For chemical test
9.1(Sample plan)	-	1500	For dimensional and other qualitative tests
9.2(Tensile test)	-	2500	For mechanical tests
9.3(Mechanical properties)	-	2500	For mechanical tests
9.4(Erichsen cupping test)	-	1500	For dimensional and other qualitative tests
10(Retests)	-	1500	For dimensional and other qualitative tests
11(Surface finish)	-	1500	For dimensional and other qualitative tests
12(Dimensions)	-	1500	For dimensional and other qualitative tests
13(Edge condition)	-	1500	For dimensional and other qualitative tests
14.1(Thickness)	-	1500	For dimensional and other qualitative tests
14.2.1(Mill Edge)	-	1500	For dimensional and other qualitative tests
14.2.2(Trimmed Edge)	-	1500	For dimensional and other qualitative tests
14.3(Length)	-	1500	For dimensional and other qualitative tests
14.4(Flatness)	-	1500	For dimensional and other qualitative tests
14.5(Camber)	-	1500	For dimensional and other qualitative tests
15(Inspection)	-	1500	For dimensional and other qualitative tests
17(Marking)	-	1500	For dimensional and other qualitative tests

-
Included w.e.f 23.06.2025

5479

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

Packaged natural mineral Water

17940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 1/i(Colour)	-	180	-
6.2/Table 1/ii(Odour)	-	120	-
6.2/Table 1/iii(Taste)	-	120	-
6.2/Table 1/iv(Turbidity)	-	120	-
6.2/Table 1/v(Total Dissoved)	-	180	-
6.2/Table 1/vi(pH Value)	-	120	-
6.2/Table 2/i(Nitrate)	-	220	-
6.2/Table 2/ii(Nitrite)	-	250	-
6.2/Table 2/iii(Sulphide)	-	180	-
6.2/Table 2/iv(Manganese)	-	180	-
6.2/Table 2/v(Copper)	-	250	-
6.2/Table 2/vi(Fluoride)	-	225	-
6.2/Table 2/vii(Barium)	-	260	-
6.2/Table 2/viii(Antimony)	-	410	-
6.2/Table 2/ix(Borate)	-	410	-
6.2/Table 2/x(Silver)	-	420	-
6.2/Table 2/xi(Chloride)	-	170	-
6.2/Table 2/xii(Sulphate)	-	225	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
6.2/Table 2/xv(Sodium)	-	240	-
6.2/Table 2/xvi(Alkalinity)	-	150	-
6.2/Table 2/xvii(Selenium)	-	410	-
6.2/Table 2/xviii(Mineral Oil)	-	140	-
6.2/Table 2/xix(Phenolic Compounds)	-	440	-
6.2/Table 2/xx(Anionic Surface active agents)	-	450	-
6.2/Table 3/i(Arsenic)	-	410	-
6.2/Table 3/ii(Cadmium)	-	250	-
6.2/Table 3/iii(Cyanide)	-	410	-
6.2/Table 3/iv(Chromium)	-	250	-
6.2/Table 3/v(Mercury)	-	410	-
6.2/Table 3/vi(Lead)	-	410	-
6.2/Table 3/vii(Nickel)	-	250	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1490	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1780	-
6.2/Table 3/x(Uranium)	-	890	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1780	For all pesticides Rs1780
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	For all pesticides Rs1780
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	For all pesticides Rs1780
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (vi)(Ethion)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (x)(Butachlor)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xv)(Malathion)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	For all pesticides Rs1780
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	For all pesticides Rs1780
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	For all pesticides Rs1780
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	210	-
6.1.4(Sulphite Reducing Anaerobe)	-	250	-
6.1.5(Pseudomonas aeruginosa)	-	260	-
6.1.6(Yeast and moould)	-	250	-
6.1.7(Salmonella)	-	350	-
6.1.8(Vibrio Cholera)	-	410	-
Cl-6.1.3(Staphylococcus aureus)	-	260	-
Cl-6.1.7(Shigella)	-	440	-
Cl-6.1.8(V. parahaemolyticus)	-	350	-
6.2/Table 1/i(Colour)	-	180	-
6.2/Table 1/ii(Odour)	-	120	-
6.2/Table 1/iii(Taste)	-	120	-
6.2/Table 1/iv(Turbidity)	-	120	-
6.2/Table 1/v(Total Dissoved)	-	180	-
6.2/Table 1/vi(pH Value)	-	120	-
6.2/Table 2/i(Nitrate)	-	220	-
6.2/Table 2/ii(Nitrite)	-	250	-
6.2/Table 2/iii(Sulphide)	-	180	-
6.2/Table 2/iv(Manganese)	-	180	-
6.2/Table 2/v(Copper)	-	250	-
6.2/Table 2/vi(Fluoride)	-	225	-
6.2/Table 2/vii(Barium)	-	260	-
6.2/Table 2/viii(Antimony)	-	410	-
6.2/Table 2/ix(Borate)	-	410	-
6.2/Table 2/x(Silver)	-	420	-
6.2/Table 2/xi(Chloride)	-	170	-
6.2/Table 2/xii(Sulphate)	-	225	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
6.2/Table 2/xv(Sodium)	-	240	-
6.2/Table 2/xvi(Alkalinity)	-	150	-
6.2/Table 2/xvii(Selenium)	-	410	-
6.2/Table 2/xviii(Mineral Oil)	-	140	-
6.2/Table 2/xix(Phenolic Compounds)	-	440	-
6.2/Table 2/xx(Anionic Surface active agents)	-	450	-
6.2/Table 3/i(Arsenic)	-	410	-
6.2/Table 3/ii(Cadmium)	-	250	-
6.2/Table 3/iii(Cyanide)	-	410	-
6.2/Table 3/iv(Chromium)	-	250	-
6.2/Table 3/v(Mercury)	-	410	-
6.2/Table 3/vi(Lead)	-	410	-
6.2/Table 3/vii(Nickel)	-	250	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1490	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1780	-
6.2/Table 3/x(Uranium)	-	890	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1780	For all pesticides Rs.1780
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	For all pesticides Rs.1780
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	For all pesticides Rs.1780
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (vi)(Ethion)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (x)(Butachlor)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xv)(Malathion)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	For all pesticides Rs.1780
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	For all pesticides Rs.1780
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	For all pesticides Rs.1780
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	210	-
6.1.4(Sulphite Reducing Anaerobe)	-	250	-
6.1.5(Pseudomonas aeruginosa)	-	260	-
6.1.6(Yeast and moould)	-	250	-
6.1.7(Salmonella)	-	350	-
6.1.8(Vibrio Cholera)	-	410	-
Cl-6.1.3(Staphylococcus aureus)	-	260	-
Cl-6.1.7(Shigella)	-	440	-
Cl-6.1.8(V. parahaemolyticus)	-	350	-
6.2/Table 1/i(Colour)	-	120	-
6.2/Table 1/ii(Odour)	-	120	-
6.2/Table 1/iii(Taste)	-	120	-
6.2/Table 1/iv(Turbidity)	-	120	-
6.2/Table 1/v(Total Dissoved)	-	180	-
6.2/Table 1/vi(pH Value)	-	120	-
6.2/Table 2/i(Nitrate)	-	220	-
6.2/Table 2/ii(Nitrite)	-	250	-
6.2/Table 2/iii(Sulphide)	-	180	-
6.2/Table 2/iv(Manganese)	-	180	-
6.2/Table 2/v(Copper)	-	250	-
6.2/Table 2/vi(Fluoride)	-	225	-
6.2/Table 2/vii(Barium)	-	260	-
6.2/Table 2/viii(Antimony)	-	410	-
6.2/Table 2/ix(Borate)	-	410	-
6.2/Table 2/x(Silver)	-	420	-
6.2/Table 2/xi(Chloride)	-	170	-
6.2/Table 2/xii(Sulphate)	-	225	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
6.2/Table 2/xv(Sodium)	-	240	-
6.2/Table 2/xvi(Alkalinity)	-	150	-
6.2/Table 2/xvii(Selenium)	-	410	-
6.2/Table 2/xviii(Mineral Oil)	-	140	-
6.2/Table 2/xix(Phenolic Compounds)	-	440	-
6.2/Table 2/xx(Anionic Surface active agents)	-	450	-
6.2/Table 3/i(Arsenic)	-	410	-
6.2/Table 3/ii(Cadmium)	-	250	-
6.2/Table 3/iii(Cyanide)	-	410	-
6.2/Table 3/iv(Chromium)	-	250	-
6.2/Table 3/v(Mercury)	-	410	-
6.2/Table 3/vi(Lead)	-	410	-
6.2/Table 3/vii(Nickel)	-	250	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1490	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1780	-
6.2/Table 3/x(Uranium)	-	890	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1780	For all pesticides 1780
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	For all pesticides 1780
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	For all pesticides 1780
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (vi)(Ethion)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (x)(Butachlor)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xv)(Malathion)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	For all pesticides 1780
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	For all pesticides 1780
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	For all pesticides 1780
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	210	-
6.1.4(Sulphite Reducing Anaerobe)	-	250	-
6.1.5(Pseudomonas aeruginosa)	-	260	-
6.1.6(Yeast and moould)	-	250	-
6.1.7(Salmonella)	-	350	-
6.1.8(Vibrio Cholera)	-	410	-
Cl-6.1.3(Staphylococcus aureus)	-	260	-
Cl-6.1.7(Shigella)	-	440	-
Cl-6.1.8(V. parahaemolyticus)	-	350	-
6.2/Table 1/i(Colour)	-	0	Parameter repeated.
6.2/Table 1/ii(Odour)	-	0	Parameter repeated.
6.2/Table 1/iii(Taste)	-	0	Parameter repeated.
6.2/Table 1/iv(Turbidity)	-	0	Parameter repeated.
6.2/Table 1/v(Total Dissoved)	-	0	Parameter repeated.
6.2/Table 1/vi(pH Value)	-	0	Parameter repeated.
6.2/Table 2/i(Nitrate)	-	0	Parameter repeated.
6.2/Table 2/ii(Nitrite)	-	0	Parameter repeated.
6.2/Table 2/iii(Sulphide)	-	0	Parameter repeated.
6.2/Table 2/iv(Manganese)	-	0	Parameter repeated.
6.2/Table 2/v(Copper)	-	0	Parameter repeated.
6.2/Table 2/vi(Fluoride)	-	0	Parameter repeated.
6.2/Table 2/vii(Barium)	-	0	Parameter repeated.
6.2/Table 2/viii(Antimony)	-	0	Parameter repeated.
6.2/Table 2/ix(Borate)	-	0	Parameter repeated.
6.2/Table 2/x(Silver)	-	0	Parameter repeated.
6.2/Table 2/xi(Chloride)	-	0	Parameter repeated.
6.2/Table 2/xii(Sulphate)	-	0	Parameter repeated.
6.2/Table 2/xiii(Magnesium)	-	0	Parameter repeated.
6.2/Table 2/xiv(Calcium)	-	0	Parameter repeated.
6.2/Table 2/xv(Sodium)	-	0	Parameter repeated.
6.2/Table 2/xvi(Alkalinity)	-	0	Parameter repeated.
6.2/Table 2/xvii(Selenium)	-	0	Parameter repeated.
6.2/Table 2/xviii(Mineral Oil)	-	0	Parameter repeated.
6.2/Table 2/xix(Phenolic Compounds)	-	0	Parameter repeated.
6.2/Table 2/xx(Anionic Surface active agents)	-	0	Parameter repeated.
6.2/Table 3/i(Arsenic)	-	0	Parameter repeated.
6.2/Table 3/ii(Cadmium)	-	0	Parameter repeated.
6.2/Table 3/iii(Cyanide)	-	0	Parameter repeated.
6.2/Table 3/iv(Chromium)	-	0	Parameter repeated.
6.2/Table 3/v(Mercury)	-	0	Parameter repeated.
6.2/Table 3/vi(Lead)	-	0	Parameter repeated.
6.2/Table 3/vii(Nickel)	-	0	Parameter repeated.
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	Parameter repeated.
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	Parameter repeated.
6.2/Table 3/x(Uranium)	-	0	Parameter repeated.
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	Parameter repeated.
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	Parameter repeated.
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	Parameter repeated.
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	Parameter repeated.
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	Parameter repeated.
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	Parameter repeated.
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	Parameter repeated.
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	Parameter repeated.
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	Parameter repeated.
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	Parameter repeated.
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	Parameter repeated.
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	Parameter repeated.
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	Parameter repeated.
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	Parameter repeated.
Cl- 6.3, Annex N (vi)(Ethion)	-	0	Parameter repeated.
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	Parameter repeated.
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	Parameter repeated.
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	Parameter repeated.
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	Parameter repeated.
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	Parameter repeated.
Cl- 6.3, Annex N (x)(Butachlor)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xv)(Malathion)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	Parameter repeated.
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	Parameter repeated.
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	Parameter repeated.
6.1.1(Escherichia coli)	-	0	Parameter repeated.
6.1.2(Coliform)	-	0	Parameter repeated.
6.1.3(Faecal Streptococci)	-	0	Parameter repeated.
6.1.4(Sulphite Reducing Anaerobe)	-	0	Parameter repeated.
6.1.5(Pseudomonas aeruginosa)	-	0	Parameter repeated.
6.1.6(Yeast and moould)	-	0	Parameter repeated.
6.1.7(Salmonella)	-	0	Parameter repeated.
6.1.8(Vibrio Cholera)	-	0	Parameter repeated.
Cl-6.1.3(Staphylococcus aureus)	-	0	Parameter repeated.
Cl-6.1.7(Shigella)	-	0	Parameter repeated.
Cl-6.1.8(V. parahaemolyticus)	-	0	Parameter repeated.

-
Included w.e.f.28.07.2025 Exclusion Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max) Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

5480

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	For chemical test
8.2, Table 3(Tensile Test-1608:Part 1)	-	3000	For mechanical test
8.2, Table 3(Proof Stress, N/mm2)	-	3000	For mechanical test
8.2, Table 3(Tensile Strength, N/mm2)	-	3000	For mechanical test
8.2, Table 3(Elongation, %)	-	3000	For mechanical test
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	3000	For mechanical test
8.4(Bend Test)	-	3000	For mechanical test
8.5(Erichsen Cupping Test)	-	2999.98	For mechanical test
10.1(Thickness, mm)	-	2000	For dimensional and other qualitative tests
10.2(width, mm)	-	2000	For dimensional and other qualitative tests
10.3(Length, mm)	-	2000	For dimensional and other qualitative tests
10.4(Flatness,mm)	-	2000	For dimensional and other qualitative tests
10.5(Camber, mm)	-	2000	For dimensional and other qualitative tests
11(Surface Finish)	-	2000	For dimensional and other qualitative tests
Cl . 6 .0(Freedom from defect)	-	2000	For dimensional and other qualitative tests
13(Marking)	-	2000	For dimensional and other qualitative tests
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	0	-
8.2, Table 3(Proof Stress, N/mm2)	-	0	-
8.2, Table 3(Tensile Strength, N/mm2)	-	0	-
8.2, Table 3(Elongation, %)	-	0	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Erichsen Cupping Test)	-	0	-
10.1(Thickness, mm)	-	0	-
10.2(width, mm)	-	0	-
10.3(Length, mm)	-	0	-
10.4(Flatness,mm)	-	0	-
10.5(Camber, mm)	-	0	-
11(Surface Finish)	-	0	-
Cl . 6 .0(Freedom from defect)	-	0.03	-
13(Marking)	-	0	-

-
Included w.e.f 23.06.2025

5481

BIS, Western Regional Laboratory (WRL)

None

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-
Cl-5 (General notes on tests)	-
Cl-6 (Rating)	-
Cl-7 (Classification)	-
Cl-8 (Marking)	-
Cl-9 (Checking of dimensions)	-
Cl-10.1, 10.2 (Prevention of Access to Live Parts)	-
Cl-10.3 (Requirements for Accessible Metal Parts)	-
Cl-10.4 (Requirements for Insulation of the Mechanism)	-
Cl. 10.5 (Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-
Cl-10.6 (Requirements for Switches Operated Indirectly)	-
Cl-10.7 (Requirements for Switches with Replaceable Pull Cord)	-
Cl-11 (Provision for earthing)	-
Cl-12 (Terminals)	-
Cl-13 (Constructional requirements)	-
Cl-14 (Mechanism)	-
Cl-15.1 (Resistance to Ageing)	-
Cl-15.2 (Protection Provided by Enclosures of Switches)	-
Cl-15.3 (Resistance to Humidity)	-
Cl-16.1 (General)	-
Cl-16.2 (Test for Measuring the Insulation Resistance)	-
Cl-16.3 (Electric Strength Test)	-
Cl-17 (Temperature rise)	-
Cl-18 (Making and breaking capacity)	-
Cl-19 (Normal operation)	-
19.1 (Test for Switches Intended for Inductive Loads)	-
19.2 (Test for Switches Intended for Externally Ballasted Lamp Loads)	-
19.3 (Test for Switches Intended for Self-ballasted Lamp Loads)	-
Cl-20 (Mechanical strength)	-
Cl-21 (Resistance to heat)	-
Cl-22 (Screws, current carrying parts and connections)	-
Cl-23 (Creepage distances, clearances and distance through sealing compound)	-
Cl-24.1 (Resistance to abnormal heat and fire)	-
Cl-24.2 (Resistance to tracking)	-
Cl-25 (Resistance to rusting)	-
13.5 (Attachment of knobs)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-
12.3.12(Table 13) (Deflection Test Forces)	-

-
Complete TF is available for varieties upto and including 32 A.

5482

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

ALL

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	1000	-
Clause no. 3.1(Top Cover / Top Sheet)	-	1000	-
Clause no. 3.2(Absorbent Core)	-	1000	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	1000	-
Clause no. 4(Fastening & Securing Mechanism)	-	1000	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	1000	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	-
Clause no.6(Diaper Length)	-	500	-
Clause no.6(Diaper Width)	-	500	-
Clause no.6(Diaper Crotch)	-	500	-
Clause no.6(Absorbent Core Length)	-	500	-
Clause no.6(Absorbent Core Width Back)	-	500	-
Clause no.6(Absorbent Core Width Front)	-	500	-
Clause no.6(Core Crotch Width)	-	500	-
Clause no.7.1(pH Value)	-	500	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	500	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	500	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	500	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	500	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	500	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	5000	-
9(Marking)	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	5000	-
6(Type and Size)	-	0	-
7.1(pH Test)	-	0	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	0	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	0	-
Clause no. 3(Material)	-	0	-
Clause no. 3.1(Top Cover / Top Sheet)	-	0	-
Clause no. 3.2(Absorbent Core)	-	0	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	-
Clause no. 4(Fastening & Securing Mechanism)	-	0	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	0	-
Clause no.6(Type and Size: FOR X LARGE)	-	0	-
Clause no.6(Diaper Length)	-	0	-
Clause no.6(Diaper Width)	-	0	-
Clause no.6(Diaper Crotch)	-	0	-
Clause no.6(Absorbent Core Length)	-	0	-
Clause no.6(Absorbent Core Width Back)	-	0	-
Clause no.6(Absorbent Core Width Front)	-	0	-
Clause no.6(Core Crotch Width)	-	0	-
Clause no.7.1(pH Value)	-	0	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	0	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	0	-
9(Marking)	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	0	-
6(Type and Size)	-	0	-
7.1(pH Test)	-	0	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	0	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	0	-
Clause no. 3(Material)	-	0	-
Clause no. 3.1(Top Cover / Top Sheet)	-	0	-
Clause no. 3.2(Absorbent Core)	-	0	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	-
Clause no. 4(Fastening & Securing Mechanism)	-	0	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	0	-
Clause no.6(Type and Size: FOR X LARGE)	-	0	-
Clause no.6(Diaper Length)	-	0	-
Clause no.6(Diaper Width)	-	0	-
Clause no.6(Diaper Crotch)	-	0	-
Clause no.6(Absorbent Core Length)	-	0	-
Clause no.6(Absorbent Core Width Back)	-	0	-
Clause no.6(Absorbent Core Width Front)	-	0	-
Clause no.6(Core Crotch Width)	-	0	-
Clause no.7.1(pH Value)	-	0	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	0	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	0	-
9(Marking)	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	0	-
6(Type and Size)	-	0	-
7.1(pH Test)	-	0	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	0	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	0	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	0	-

08 May, 2028

-
Included w.e.f. 30.07.2025 Exclusion: "Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity) Clause no.7.5 (Biodegradability and Compostability (optional))"

5483

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

ALL

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	20000	-
5.1.1(General)	-	20000	-
5.1.2(Optical Faults-IS 14900)	-	20000	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	20000	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	20000	-
5.1.2(Linear / Extended Faults -IS 14900)	-	20000	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	20000	-
5.2.2.1( Dimensions- Width )	-	20000	-
5.2.2.1( Dimensions- Length)	-	20000	-
5.2.2.2( Squareness)	-	20000	-
5.2.3 (Fragmentation Test- IS 17004)	-	20000	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	20000	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	20000	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	20000	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	20000	-
5.2.4.1 (Other distortions)	-	20000	-
5.2.5.1( Resistance to shock- IS 17004)	-	20000	-
5.2.5.2( Resistance to human impact- IS 17004)	-	20000	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	20000	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20000	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	20000	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	20000	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	20000	-
5.3.2.1( Dimensions and squareness- Width )	-	20000	-
5.3.2.1( Dimensions and squareness- Length)	-	20000	-
5.3.2.1( Dimensions and squareness-Squareness)	-	20000	-
5.3.2.2 (Edge displacement)	-	20000	-
5.3.3( Light Stability Test-IS 17004)	-	20000	-
5.3.3( Light Stability Test-IS 17004)	-	20000	-
5.3.4( Boil and Bake Tests-IS 17004)	-	20000	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	20000	-
5.3.6.1( Spot defects in the central area)	-	20000	-
5.3.6.2 (Linear defects in the central area)	-	20000	-
5.3.6.3( Defects in the outer area for framed edges)	-	20000	-
5.3.6.4( Vents)	-	20000	-
5.3.6.5( Creases and streaks)	-	20000	-
5.3.6.6( Defects on edge which will not be framed)	-	20000	-
5.3.7( Humidity Test – Optional)	-	20000	-
5.3.8( Resistance to Human Impact Test)	-	20000	-
4(Types)	-	20000	-
5.1.1(General)	-	20000	-
5.1.2(Optical Faults-IS 14900)	-	20000	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	20000	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	20000	-
5.1.2(Linear / Extended Faults -IS 14900)	-	20000	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	20000	-
5.2.2.1( Dimensions- Width )	-	20000	-
5.2.2.1( Dimensions- Length)	-	20000	-
5.2.2.2( Squareness)	-	20000	-
5.2.3 (Fragmentation Test- IS 17004)	-	20000	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	20000	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	20000	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	20000	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	20000	-
5.2.4.1 (Other distortions)	-	20000	-
5.2.5.1( Resistance to shock- IS 17004)	-	20000	-
5.2.5.2( Resistance to human impact- IS 17004)	-	20000	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	20000	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20000	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	20000	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	20000	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	20000	-
5.3.2.1( Dimensions and squareness- Width )	-	20000	-
5.3.2.1( Dimensions and squareness- Length)	-	20000	-
5.3.2.1( Dimensions and squareness-Squareness)	-	20000	-
5.3.2.2 (Edge displacement)	-	20000	-
5.3.3( Light Stability Test-IS 17004)	-	20000	-
5.3.3( Light Stability Test-IS 17004)	-	20000	-
5.3.4( Boil and Bake Tests-IS 17004)	-	20000	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	20000	-
5.3.6.1( Spot defects in the central area)	-	20000	-
5.3.6.2 (Linear defects in the central area)	-	20000	-
5.3.6.3( Defects in the outer area for framed edges)	-	20000	-
5.3.6.4( Vents)	-	20000	-
5.3.6.5( Creases and streaks)	-	20000	-
5.3.6.6( Defects on edge which will not be framed)	-	20000	-
5.3.7( Humidity Test – Optional)	-	20000	-
5.3.8( Resistance to Human Impact Test)	-	20000	-
5.2.1(Thickness)	-	20000	-
5.2.2(Dimension and Squarenes)	-	20000	-
5.2.4(Overall Bow)	-	20000	-
5.2.4(Measurement of wave and roller wave)	-	20000	-
5.2.4(Edge lift)	-	20000	-
5.2.4(Local distortion)	-	20000	-
5.2.3(Fragmentation test)	-	20000	-
5.2.7(Four point bending)	-	20000	-
5.2.6(Surface compression)	-	20000	-
5.2.5.1(Resistance to shock)	-	20000	-
5.2.5.2(Resistance to human impact)	-	20000	-
5.3.1(Thickness test)	-	20000	-
5.3.2.1(Dimension and Squarenes test)	-	20000	-
5.3.6(Defects in central area test)	-	20000	-
5.3.6.7(Defects in central area test)	-	20000	-
5.3.5(Fracture and adhesion)	-	20000	-
5.3.8(Resistance to human impact)	-	20000	-
5.3.4(Boil test)	-	20000	-
5.3.4(Bake test)	-	20000	-
5.3.7(Humidity test with condensation)	-	20000	-
5.3.7(Humidity test without condensation)	-	20000	-
5.3.3(Light stability test)	-	20000	-
5.3.2.2(Edge displacement test)	-	20000	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	20000	-
5.2.4(measurement of wave and roller wave)	-	20000	-
5.2.8(Fabrication in Glass)	-	20000	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	20000	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	20000	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	20000	-
As per Clause 5.3.9(Laminated Glass)	-	20000	-
As per Clause 5.2.8.2(Toughened)	-	20000	-
As per Clause 5.2.8.4(Toughened)	-	20000	-
As per Clause 5.2.9(Toughened)	-	20000	-
As per Clause 5.3.6.4(Laminated Glass)	-	20000	-
As per Clause 5.3.6.5(Laminated Glass)	-	20000	-
As per Clause 5.3.6.6(Laminated Glass)	-	20000	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	20000	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	20000	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	20000	-
As per Clause 5.7.1(Flexible Plastic)	-	20000	-
As per Clause 3.7(Wind screen and Panes)	-	20000	-
As per Clause 4.1(Wind screen and Panes)	-	20000	-

13 May, 2028

-
Included w.e.f.23.06.2025

5484

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 2067 (1975)

Specification for wrought aluminium wire for electrical purposes (Fourth Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No 4("Chemical Composition")	-	8000	-
Clause No 5.1("Mechanical properties ")	-	6000	-
Clause No 6("Freedom from defects ")	-	300	-
Clause No 7.1(Electrical resistivity of the wire condition o, H3, H4)	-	1300	-
Clause No 8("Mechanical properties condition o, H3, H4")	-	6000	-
Clause No 9(Joints)	-	300	-
Clause No 10.1(Tolerances (on size))	-	500	-
Clause No 12.1(Tensile test)	-	1000	-
Clause No 12.2(Elongation test)	-	1000	-
Clause No 12.3(Wrapping test)	-	1000	-
Clause No 12.4.1(Electrical resistivity shall be measured at room temp.)	-	1000	-
Clause No 15(Marking)	-	100	-

-
Included w.e.f.27.06.2025

5485

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	2000	10% Discount to BIS
Cl-4.2(Energy source classifications)	-	500	10% Discount to BIS
Cl-4.3(Protection against energy sources)	-	500	10% Discount to BIS
Cl-4.4(Safeguards)	-	500	10% Discount to BIS
Cl-4.5(Explosion)	-	500	10% Discount to BIS
Cl-4.6(Fixing of conductors and conductive parts)	-	500	10% Discount to BIS
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	10% Discount to BIS
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	10% Discount to BIS
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	500	10% Discount to BIS
Cl-4.10(Components requirements)	-	500	10% Discount to BIS
Cl-5.1(General- Electrically-caused injury)	-	500	10% Discount to BIS
Cl-5.2(Classification and limits of electrical energy sources)	-	2500	10% Discount to BIS
Cl-5.3(Protection against electrical energy sources)	-	2500	10% Discount to BIS
Cl-5.4(Insulation materials and requirements)	-	5000	10% Discount to BIS
Cl-5.5(Components as safeguards)	-	3000	10% Discount to BIS
Cl-5.6(Protective conductor)	-	3000	10% Discount to BIS
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2500	10% Discount to BIS
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1500	10% Discount to BIS
Cl-6.1(General- Electrically-caused fire)	-	500	10% Discount to BIS
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	10% Discount to BIS
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2500	10% Discount to BIS
Cl-6.4(Safeguards against fire under single fault conditions)	-	3000	10% Discount to BIS
Cl-6.5(Internal and external wiring)	-	3000	10% Discount to BIS
Cl-7.1(General- Injury caused by hazardous substances)	-	500	10% Discount to BIS
Cl-7.2(Reduction of exposure to hazardous substances)	-	2000	10% Discount to BIS
Cl-7.3(Ozone exposure)	-	500	10% Discount to BIS
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	500	10% Discount to BIS
Cl-7.5(Use of instructional safeguards and instructions)	-	500	10% Discount to BIS
Cl-8.1(General- Mechanically-caused injury)	-	500	10% Discount to BIS
Cl-8.2(Mechanical energy source classifications)	-	500	10% Discount to BIS
Cl-8.3(Safeguards against mechanical energy sources)	-	500	10% Discount to BIS
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	2000	10% Discount to BIS
Cl-8.5(Safeguards against moving parts)	-	2000	10% Discount to BIS
Cl-8.6(Stability of equipment)	-	2500	10% Discount to BIS
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2500	10% Discount to BIS
Cl-8.8(Handle strength)	-	1000	10% Discount to BIS
Cl-8.9(Wheels or casters attachment requirements)	-	1000	10% Discount to BIS
Cl-8.10(Carts, stands, and similar carriers)	-	1500	10% Discount to BIS
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	10% Discount to BIS
Cl-9.1(General-Thermal burn injury)	-	500	10% Discount to BIS
Cl-9.2(Thermal energy source classifications)	-	3000	10% Discount to BIS
Cl-9.3(Touch temperature limits)	-	5000	10% Discount to BIS
Cl-9.4(Safeguards against thermal energy sources)	-	500	10% Discount to BIS
Cl-9.5(Requirements for safeguards)	-	500	10% Discount to BIS
Annex A(Examples of equipment within the scope of this document)	-	0	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	500	10% Discount to BIS
Annex B-2(Normal operating conditions)	-	5000	10% Discount to BIS
Annex B-3(Simulated abnormal operating conditions)	-	5000	10% Discount to BIS
Annex B-4(Simulated single fault conditions)	-	5000	10% Discount to BIS
Annex D-1(Impulse test generators)	-	2000	10% Discount to BIS
Annex D-2(Antenna interface test generator)	-	2000	10% Discount to BIS
Annex E-1(Electrical energy source classification for audio signals)	-	3000	10% Discount to BIS
Annex E-2(Audio signals used during test)	-	3000	10% Discount to BIS
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	3000	10% Discount to BIS
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	500	10% Discount to BIS
Annex F-2(Letter symbols and graphical symbols)	-	500	10% Discount to BIS
Annex F-3(Equipment markings)	-	500	10% Discount to BIS
Annex F-4(Instructions)	-	500	10% Discount to BIS
Annex F-5(Instructional safeguards)	-	500	10% Discount to BIS
Annex G-5(Wound components)	-	10000	10% Discount to BIS
Annex G-6(Wire insulation)	-	5000	10% Discount to BIS
Annex G-7(Mains power supply cords and interconnection cables)	-	3000	10% Discount to BIS
Annex G-9(Integrated circuit (IC) current limiters)	-	10000	10% Discount to BIS
Annex G-10(Resistors)	-	10000	10% Discount to BIS
Annex G-13(Printed boards)	-	10000	10% Discount to BIS
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	10000	10% Discount to BIS
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	10000	10% Discount to BIS
Annex H-1(General- Criteria for telephone ringing signals)	-	500	10% Discount to BIS
Annex H-2(Method A)	-	2000	10% Discount to BIS
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	500	10% Discount to BIS
Annex L-1(General requirements)	-	500	10% Discount to BIS
Annex L-2(Permanently connected equipment)	-	500	10% Discount to BIS
Annex L-3()	-	500	10% Discount to BIS
Annex L-4(Single-phase equipment)	-	500	10% Discount to BIS
Annex L-5(Three-phase equipment)	-	500	10% Discount to BIS
Annex L-6(Switches as disconnect devices)	-	500	10% Discount to BIS
Annex L-7(Plugs as disconnect devices)	-	500	10% Discount to BIS
Annex L-8(Multiple power sources)	-	500	10% Discount to BIS
Annex L-9(Compliance criteria)	-	500	10% Discount to BIS
Annex M-1(General requirements)	-	1000	10% Discount to BIS
Annex M-2(Safety of batteries and their cells)	-	1000	10% Discount to BIS
Annex M-3(Protection circuits for batteries provided within the equipment)	-	10000	10% Discount to BIS
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	10000	10% Discount to BIS
Annex M-5(Risk of burn due to short-circuit during carrying)	-	10000	10% Discount to BIS
Annex M-6(Safeguards against short-circuits)	-	1500	10% Discount to BIS
Annex M-9(Preventing electrolyte spillage)	-	3000	10% Discount to BIS
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	500	10% Discount to BIS
Annex N(Electrochemical potentials (V))	-	500	10% Discount to BIS
Annex O(Measurement of creepage distances and clearances)	-	5000	10% Discount to BIS
Annex P-1(General-Safeguards against conductive objects)	-	500	10% Discount to BIS
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	3000	10% Discount to BIS
Annex P-3(Safeguards against spillage of internal liquids)	-	3000	10% Discount to BIS
Annex Q-1(Limited power source)	-	5000	10% Discount to BIS
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	10% Discount to BIS
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	10000	10% Discount to BIS
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	10000	10% Discount to BIS
Annex S-4(Flammability classification of materials)	-	500	10% Discount to BIS
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	10000	10% Discount to BIS
Annex T-1(General-Mechanical strength tests)	-	500	10% Discount to BIS
Annex T-2(Steady force test, 10 N)	-	1500	10% Discount to BIS
Annex T-3(Steady force test, 30 N)	-	2000	10% Discount to BIS
Annex T-4(Steady force test, 100 N)	-	3000	10% Discount to BIS
Annex T-5(Steady force test, 250 N)	-	5000	10% Discount to BIS
Annex T-6(Enclosure impact test)	-	3000	10% Discount to BIS
Annex T-7(Drop test)	-	3000	10% Discount to BIS
Annex T-8(Stress relief test)	-	5000	10% Discount to BIS
Annex T-9(Glass impact test)	-	5000	10% Discount to BIS
Annex T-11(Test for telescoping or rod antennas)	-	1500	10% Discount to BIS
Annex V-1(Accessible parts of equipment)	-	3000	10% Discount to BIS
Annex V-2(Accessible part criterion)	-	500	10% Discount to BIS
Annex W(Comparison of terms introduced in this document)	-	0	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	10000	10% Discount to BIS
Annex H-3(Method B)	-	5000	10% Discount to BIS
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	10% Discount to BIS
Annex Y-6(Mechanical strength of enclosures)	-	3000	10% Discount to BIS
Annex T-10(Glass fragmentation test)	-	3000	10% Discount to BIS
Cl-9.6(Requirements for wireless power transmitters)	-	5000	10% Discount to BIS

17 Feb, 2028

-
Included w.e.f. 30.06.2025. Exclusion- Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation), Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)"), Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex C-1 (Protection of materials in equipment from UV radiation), Annex C-2 (UV light conditioning test), Annex C-1 (Protection of materials in equipment from UV radiation), Annex C-2 (UV light conditioning test), Annex R (Limited short-circuit test), Annex U ("Mechanical strength of CRTs and protection against the effects of implosion"), Annex Y-1 (General- Construction requirements for outdoor enclosures), Annex Y-2 (Resistance to UV radiation), Annex Y-3 (Resistance to corrosion), Annex Y-5 (Protection of equipment within an outdoor enclosure), Annex S-3 (Flammability tests for the bottom of a fire enclosure), Annex S-6 (Grille covering material, cloth, and reticulated foam)

5486

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

all

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	9000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	10000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	10000	-
3.1(Packing)	-	0	-
3.2(Marking)	-	0	-
2.1(Description)	-	0	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	0	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	0	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	0	-
3.1(Packing)	-	0	-
3.2(Marking)	-	0	-
2.1(Description)	-	0	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	0	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	0	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	0	-
3.1(Packing)	-	0	-
3.2(Marking)	-	0	-

08 May, 2028

-
Included w.e.f 28.07.2025

5487

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 6912 (2005)

Copper and copper alloys forging stock and forging - Specification (Second Revision)

ALL

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SUPPLY OF MATERIAL)	-	12000	-
Cl. No.6(Freedom from defects)	-	12000	-
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	12000	-
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	12000	-
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	12000	-
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	12000	-
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	12000	-
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	12000	-
Cl.no.9(Mechanical properties)	-	12000	-
Cl.no.10(Forgability Test)	-	12000	-
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	12000	-
Cl. No.15(Marking)	-	12000	-
Cl. No.4(SUPPLY OF MATERIAL)	-	12000	-
Cl. No.6(Freedom from defects)	-	12000	-
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	12000	-
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	12000	-
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	12000	-
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	12000	-
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	12000	-
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	12000	-
Cl.no.9(Mechanical properties)	-	12000	-
Cl.no.10(Forgability Test)	-	12000	-
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	12000	-
Cl. No.15(Marking)	-	12000	-
As per Clause 12.1.1(For Forging Stock)	-	12000	-
As per Clause 12.1.2(For Forging)	-	12000	-
As per Clause 13.1.1(Forging Stock)	-	12000	-
As per Clause 13.1.2(Hot Worked Material)	-	12000	-
As per Clause 13.1.3(Cold Worked Material)	-	12000	-
As per Clause 13.1.4(Cast Material)	-	12000	-
As per Clause 13.1.5(Diameter or Width Across flats greater than 28 mm)	-	12000	-
Cl. No.4(SUPPLY OF MATERIAL)	-	12000	-
Cl. No.6(Freedom from defects)	-	12000	-
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	12000	-
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	12000	-
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	12000	-
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	12000	-
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	12000	-
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	12000	-
Cl.no.9(Mechanical properties)	-	12000	-
Cl.no.10(Forgability Test)	-	12000	-
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	12000	-
Cl. No.15(Marking)	-	12000	-
Cl. No.4(SUPPLY OF MATERIAL)	-	12000	-
Cl. No.6(Freedom from defects)	-	12000	-
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	12000	-
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	12000	-
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	12000	-
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	12000	-
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	12000	-
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	12000	-
Cl.no.9(Mechanical properties)	-	12000	-
Cl.no.10(Forgability Test)	-	12000	-
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	12000	-
Cl. No.15(Marking)	-	12000	-
As per Clause 12.1.1(For Forging Stock)	-	12000	-
As per Clause 12.1.2(For Forging)	-	12000	-
As per Clause 13.1.1(Forging Stock)	-	12000	-
As per Clause 13.1.2(Hot Worked Material)	-	12000	-
As per Clause 13.1.3(Cold Worked Material)	-	12000	-
As per Clause 13.1.4(Cast Material)	-	12000	-
As per Clause 13.1.5(Diameter or Width Across flats greater than 28 mm)	-	12000	-

13 May, 2028

-
Included w.e.f.23.06.2025

5488

Switchgear Testing Laboratories, Schneider Electric India Private Limited, Ahmednagar

7184626

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

4012000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	This test facility is not under NABL Scope
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
7.2.3(Dielectric properties)	-	25000	-
8.1.5(Special tests)	-	140000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	20000	This test facility is not under NABL Scope
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
Cl-7.3(Electromagnetic compatibility (EMC))	-	20000	This test facility is not under NABL Scope
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
7.3.2.7(Surges)	-	20000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	This test facility is not under NABL Scope
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
7.2.3(Dielectric properties)	-	25000	-
8.1.5(Special tests)	-	140000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	20000	This test facility is not under NABL Scope
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
Cl-7.3(Electromagnetic compatibility (EMC))	-	20000	This test facility is not under NABL Scope
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.2.3(Dielectric properties)	-	20000	-
8.1.5(Special tests)	-	20000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-

25 Mar, 2028

-
iNCLUDED W.E.F.21.08.2025 EXCLUSION 7.3.2.4 (Electrostatic discharges) 7.3.2.5 (Radiated radio-frequency electromagnetic fields) 7.3.2.6 (Electrical fast transients/bursts) 7.3.2.7 (Surges) 7.3.2.8 (Conducted disturbances induced by radio-frequency fields) 7.3.2.9 (Power-frequency magnetic fields) 7.3.2.10 (Voltage dips and interruptions) 7.3.2.11 (Harmonics in the supply) 7.3.3 (Emission) 8.4.2.4 (Surges) H.8.7 ("Verification of electromagnetic compatibility") Cl-7.3 (Electromagnetic compatibility (EMC)) 8.4.2.4 (Surges) Cl-7.3.2 (Immunity)

5489

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

All

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	8000	-
6.0(Shape)	-	8000	-
6.0(Size)	-	8000	-
6.0(Mass)	-	8000	-
7.0(Cu)	-	8000	-
7.0(Sn)	-	8000	-
7.0(Pb)	-	8000	-
7.0(Ni)	-	8000	-
7.0(Fe)	-	8000	-
7.0(Al)	-	8000	-
7.0(Mn)	-	8000	-
7.0(Si)	-	8000	-
7.0(Total impurities excluding Ni Pb Al Zn)	-	8000	-
9.0(Pressure test)	-	8000	-
11(Marking)	-	8000	-

13 May, 2028

-
Included w.e.f.23.06.2025

5490

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	5000	For dimensional and other qualitative tests
Cl 3.2(Material used for composite bottom)	-	5000	For dimensional and other qualitative tests
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	5000	For dimensional and other qualitative tests
Cl 3.4(Material used for stainless steel lid)	-	5000	For dimensional and other qualitative tests
Cl 3.5(Material used for tempered glass lid)	-	5000	For dimensional and other qualitative tests
Cl 3.5(Material used for stainless steel rim)	-	5000	For dimensional and other qualitative tests
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	5000	For dimensional and other qualitative tests
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	5000	For dimensional and other qualitative tests
Cl 4.2(Thickness of the finished utensil)	-	5000	For dimensional and other qualitative tests
Cl 4.3(Classification)	-	5000.03	For dimensional and other qualitative tests
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	5000	For dimensional and other qualitative tests
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	5000	For dimensional and other qualitative tests
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	5000	For dimensional and other qualitative tests
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	5000	For dimensional and other qualitative tests
Cl 5.1(Manufacturing defect & visual appearance)	-	5000	For dimensional and other qualitative tests
CL 5.2(Accessibility for cleaning)	-	5000	For dimensional and other qualitative tests
Cl 5.3(Joining of handles to the utensils)	-	5000	For dimensional and other qualitative tests
Cl 5.4(Requirement for handles)	-	5000	For dimensional and other qualitative tests
Cl 5.5(Welding (Finish))	-	5000	For dimensional and other qualitative tests
Cl 5.6(Finish of 3-ply utensil)	-	5000	For dimensional and other qualitative tests
Cl 5.7(Requirement for coating)	-	5000	For dimensional and other qualitative tests
Cl 5.8(Coating thickness test)	-	5000	For dimensional and other qualitative tests
Cl 5.8(Coating adhesion test)	-	5000	For dimensional and other qualitative tests
Cl 5.8.1(Thermal shock test (Coating))	-	2000	For thermal and mechanical shock test.
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	5000	For dimensional and other qualitative tests
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	2000	For thermal and mechanical shock tests.
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	2000	For thermal and mechanical shock tests.
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	5000	For dimensional and other qualitative tests.
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	5000	For dimensional and other qualitative tests.
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	2000	-
Cl 6.7(Nominal Capacity Test)	-	5000.02	For dimensional and other qualitative tests.
Cl 8(Marking)	-	5000	For dimensional and other qualitative tests.
3.1(a) Carbon)	-	6500	For chemical test
3.1(b) Silicon)	-	6500	For chemical test
3.1(c)Manganese)	-	6500	For chemical test
3.1(d) Nickel)	-	6500	For chemical test
3.1(Chromium)	-	6500	For chemical test
3.1(Sulphu)	-	6500	For chemical test
3.1(Phosphorus)	-	6500	For chemical test
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	9000	For dimensional and other qualitative tests.
3.1(Nitrogen)	-	6500	For chemical test
3.2 a(a) Carbon)	-	6500	For chemical test
3.2 a(b) Silicon)	-	6500	For chemical test
68995(Manganese)	-	6500	For chemical test
3.2 a(d) Nickel)	-	6500	For chemical test
3.2 a(Chromium)	-	6500	For chemical test
3.2 a(Sulphur)	-	6500	For chemical test
3.2 a(g) Phosphorus)	-	6500	For chemical test
3.2 a(h) Copper)	-	6500	For chemical test
3.2 a(Nitrogen)	-	6500	For chemical test
3.2 b(a) Aluminium)	-	6500	For chemical test
3.2 b(b) Copper)	-	6500	For chemical test
3.2 b(c) Magnesium)	-	6500	For chemical test
3.2 b(d) Silicon)	-	6500	For chemical test
3.2 b(e) Iron)	-	6500	For chemical test
3.2 b(f) Manganese)	-	6500	For chemical test
3.2 b(d) Silicon)	-	6500	For chemical test
3.2 b(e) Iron)	-	6500	For chemical test
3.2 b(f) Manganese)	-	6500	For chemical test
3.2 b(g) Zinc)	-	6500	For chemical test
3.2 b(h) Titanium)	-	6500	For chemical test
3.2 b(i) Chromium)	-	6500	For chemical test
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	6500	For chemical test
3.2 b(k) Lead)	-	6500	For chemical test
3.2 c(a) Carbon)	-	6500	For chemical test
3.2 c(b) Silicon)	-	6500	For chemical test
3.2 c(c) Manganese)	-	6500	For chemical test
3.2 c(d) Nickel)	-	6500	For chemical test
3.2 c(e) Chromium)	-	6500	For chemical test
3.2 c(f) Sulphur)	-	6500	For chemical test
3.2 c(g) Phosphorus)	-	6500	For chemical test
3.3(a) Inner layer)	-	5000	For dimensional and other qualitative tests.
3.3(b) Middlelayer)	-	5000	For dimensional and other qualitative tests.
3.3(c) Outerlayer)	-	5000	For dimensional and other qualitative tests.
3.4(a) Carbon)	-	6500	For chemical test
3.4(b) Silicon)	-	6500	For chemical test
3.4(c) Manganese)	-	6500	For chemical test
3.4(d) Nickel)	-	6500	For chemical test
3.4(e) Chromium)	-	6500	For chemical test
3.4(f) Sulphur)	-	6500	For chemical test
3.4(g) Phosphorus)	-	6500	For chemical test
3.4(h) Copper)	-	6500	For chemical test
3.4(i) Nitrogen)	-	6500	For chemical test
3.4(Thickness stainless steel lid)	-	5000	For dimensional and other qualitative tests.
3.5(If the utensils provided with tempered glass lid)	-	5000	For dimensional and other qualitative tests.
4.1(Shapes and Dimensions)	-	5000	For dimensional and other qualitative tests.
4.2(Thickness of the sheet)	-	5000	For dimensional and other qualitative tests.
4.3(Classifications)	-	5000	For dimensional and other qualitative tests.
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	5000	For dimensional and other qualitative tests.
4.3(Thickness of protective layer (as per IS 15960))	-	5000	For dimensional and other qualitative tests.
4.4(Thickness of 3ply full body utensil)	-	5000	For dimensional and other qualitative tests.
5(Workmanship and finish)	-	5000	For dimensional and other qualitative tests.
5.4(Handles)	-	5000	For dimensional and other qualitative tests.
4.1 of IS 13395(Construction)	-	5000	For dimensional and other qualitative tests.
4.2 of IS 13395(Materials)	-	5000	For dimensional and other qualitative tests.
4.3 of IS 13395(Selection and Size)	-	5000	For dimensional and other qualitative tests.
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	5000	For dimensional and other qualitative tests.
4.5 of IS 13395(Attachment to Cookware)	-	5000	For dimensional and other qualitative tests.
5.2 of IS 13395(Bending Strength)	-	4000	For mechanical tests
5.3 of IS 13395(Torque Strength)	-	4000	For mechanical tests
5.4 of IS 13395(Impact Strength)	-	4000	For mechanical tests
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	5000	For dimensional and other qualitative tests.
5.6 of IS 13395(Leakage)	-	5000	For dimensional and other qualitative tests.
5.7 of IS 13395(Thermal Insulation)	-	5000	For dimensional and other qualitative tests.
5.8 of IS 13395(Heat Resistance)	-	5000	For dimensional and other qualitative tests.
5.9 of IS 13395(Washing Resistance)	-	5000	For dimensional and other qualitative tests.
5.10 of IS 13395(Burning Resistance)	-	5000	For dimensional and other qualitative tests.
5.5(Material comes in contact with food)	-	5000	For dimensional and other qualitative tests.
6.1(Staining Test)	-	5000	For dimensional and other qualitative tests.
6.2(Mechanical Shock Test)	-	2000	For thermal and mechanical shock test
6.3(Thermal Shock Test)	-	2000	For thermal and mechanical shock test
6.4(Dry Heat Test)	-	5000	For dimensional and other qualitative tests.
6.6(Heat test)	-	5000	For dimensional and other qualitative tests.
6.7.1(Nominal Capacity Test)	-	5000	For dimensional and other qualitative tests.
6.7.2(Internal diameter of utensil)	-	5000	For dimensional and other qualitative tests.
Annex C(Test for leaching)	-	5000	For dimensional and other qualitative tests.
Annex C(Sensorial test)	-	5000.02	For dimensional and other qualitative tests.

-
Included w.e.f 23.06.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number