BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5521

BIS, Central Laboratory (CL)

None

IS 4320 (2024)

Thiram technical - Specification Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - IS 4320:2024)	-
3.2, 7.1, Table 1 (i) (Bis (dimethylthiocarbamoyl) disulphide - IS 4320:2024)	-
3.2, 7.1, Table 1 (ii) (Loss on drying at 60°C -- IS 4320:2024)	-
3.2, 7.1, Table 1 (iii) (Ash content - IS 4320:2024)	-

-
-

5522

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17264 (2022)

Textiles - Polyester industrial yarn - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation of Yarn (IS 17264))	-	5500	-
1(Microscopic and dissolution (IS 667))	-	30000	-
5.2.1 a(melting point)	-	2000	-
5.2.1 b(Staining Test (IS 667))	-	3000	-
5.2.2 & Table-1(Classification (IS 17264))	-	1000	-
5.2.2 & Table-1(Identification)	-	30000	-
6.3(Freedom from defects (IS 17264))	-	2500	-
6.1 & Table-3(Linear Density (IS 7703 Part-1))	-	2000	-
6.1 & Table-3(Tenacity (IS 7703 Part-2))	-	2000	-
6.1 & Table-3(Elongation (IS 7703 Part-2))	-	2000	-
6.1 & Table-3(Hot Air Shrinkage (IS 17264))	-	2000	-
6.2 & Table-4(Moisture regain (IS 17264))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2000	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2000	-
6.2 & Table-4(Finish oil pick-up (IS 17264))	-	2000	-
6.2 & Table-4(Phosphorus content (IS 17264))	-	2000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2))	-	30000	-
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264))	-	2000	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264))	-	2000	-
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01))	-	5500	-
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12))	-	3000	-
8(Marking (IS 17264))	-	1000	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	30000	-
6.4- Table -5, Sl no. 2 (a)(Rubbing, Dry IS/ISO 105-X12)	-	3000	-
6.4- Table -5, Sl no. 2 (b)(Rubbing, Wet IS/ISO 105-X13)	-	3000	-
6.5(Commercial mass)	-	2000	-
6.2 Table 4(Finish Oil Pickup)	-	2000	-
6.2 Table 4(Phosporus content)	-	2000	-
6.2 Table 4(Colour strength with reference to std yarn %)	-	2000	-
6.4 Table 5(Colour Fastness to Rubbing)	-	3000	-
6.1 Table 3(Linear Density, Denier (dtex))	-	2000	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2000	-
6.1 Table 3(Elongation %)	-	2000	-
6.1 Table 3(Hot Air Shrinkage %)	-	2000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Table 6

5523

Sleen India Biz venture Private Limited, Agra

9139736

IS 10931 (2023)

Lauric Acid - Specification (first revision of IS 10931)

All type

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	300	-
4.2 Table 1 (i)(Moisture)	-	500	-
4.2 Table 1 (ii)(Saponification value)	-	1000	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	1000	-
4.2 Table 1 (iv)(Iodine value)	-	3000	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	2000	-
4.2 Table 1 (vi)(Titre)	-	3000	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	1000	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	4000	-
4.3 Table 2 (ii)(C12 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (ii)(C12 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 3 (iii)(C14 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (iv)(C16 : 0)	-	0	Combined test price for cl.4.3 is 4000/-.
4.3 Table 2 (v)(Others)	-	0	Combined test price for cl.4.3 is 4000/-.
4.1(Description)	-	0	-
4.2 Table 1 (i)(Moisture)	-	0	-
4.2 Table 1 (ii)(Saponification value)	-	0	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.2 Table 1 (iv)(Iodine value)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	0	-
4.2 Table 1 (vi)(Titre)	-	0	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	0	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	0	-
4.3 Table 2 (ii)(C12 : 0)	-	0	-
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	-
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	-
4.3 Table 3 (ii)(C12 : 0)	-	0	-
4.3 Table 3 (iii)(C14 : 0)	-	0	-
4.3 Table 2 (iv)(C16 : 0)	-	0	-
4.3 Table 2 (v)(Others)	-	0	-
4.1(Description)	-	0	-
4.2 Table 1 (i)(Moisture)	-	0	-
4.2 Table 1 (ii)(Saponification value)	-	0	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	0	-
4.2 Table 1 (iv)(Iodine value)	-	0	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	0	-
4.2 Table 1 (vi)(Titre)	-	0	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	0	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	0	-
4.3 Table 2 (ii)(C12 : 0)	-	0	-
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	-
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	-
4.3 Table 3 (ii)(C12 : 0)	-	0	-
4.3 Table 3 (iii)(C14 : 0)	-	0	-
4.3 Table 2 (iv)(C16 : 0)	-	0	-
4.3 Table 2 (v)(Others)	-	0	-

-
Included w.e.f 09.07.2025

5524

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

Designations - 19000,19500,22588,24345,24534,31000,52000,53000,54300,63400,64423,64430,65032,74530

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	1300	-
5.1 table 2(0.2% proof strength)	-	1300	-
5.1 table 2(Tensile strength)	-	1500	-
5.1 table 2(Elongation)	-	1500	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	1300	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	1300	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	1100	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	1050	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	1050	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	1200	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	1100	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	1000	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	1300	-
4.1(Freedom from defects)	-	500	-
9.1(Tensile test)	-	1500	-
5.1 table 1(chemical composition)	-	0	-
5.1 table 2(0.2% proof strength)	-	0	-
5.1 table 2(Tensile strength)	-	0	-
5.1 table 2(Elongation)	-	0	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
4.1(Freedom from defects)	-	0	-
9.1(Tensile test)	-	0	-

-
Included w.e.f 23.07.2025

5525

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

1100 V

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Messenger (Neutral Conductor or Otherwise))	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Insulation)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Flexibility class)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Compactness)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(No of strands)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Surface)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.3(Protective barrier)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.4(size of street lighting conductor)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.5(Size of messenger conductor )	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Joints in messenger conductor )	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Direction of outer layer)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Insulation)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2( Thickness of insulation)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.3(Tolerance on thickness of insulation )	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.4(Aplication of the insulation )	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.5(Colour of the insulation )	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Core identification)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Core identification)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Identification by other means)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Assembly (Laying up))	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Assembly (Laying up))	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of lay)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) iii)(Carbon Black Content)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of phase conductor)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (phase conductor))	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of Street Lighting conductor)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (Street Lighting conductor))	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.1(Manufacturer's Identification)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2(Cable Identification)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Phase/Street Lighting conductor)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Messenger (Neutral Conductor or Otherwise))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Flexibility class)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Compactness)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(No of strands)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Surface)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.3(Protective barrier)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.4(size of street lighting conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.5(Size of messenger conductor )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Joints in messenger conductor )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Direction of outer layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2( Thickness of insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.3(Tolerance on thickness of insulation )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.4(Aplication of the insulation )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.5(Colour of the insulation )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Core identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Core identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Identification by other means)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Assembly (Laying up))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Assembly (Laying up))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of lay)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	8000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	0	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	0	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional) )	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) iii)(Carbon Black Content)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of phase conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (phase conductor))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of Street Lighting conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (Street Lighting conductor))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.1(Manufacturer's Identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2(Cable Identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Phase/Street Lighting conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Flexibility class)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Compactness)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(No of strands)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Surface)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.3(Protective barrier)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.4(size of street lighting conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.5(Size of messenger conductor )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Joints in messenger conductor )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.6(Direction of outer layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2( Thickness of insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.3(Tolerance on thickness of insulation )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.4(Aplication of the insulation )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.5(Colour of the insulation )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Core identification)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Core identification)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Identification by other means)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Assembly (Laying up))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Assembly (Laying up))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of lay)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 g)(High voltage test - IS10810:Part 45)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.4(Bending Test on the Completed Cable ( Optional))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1 d) iii)(Carbon Black Content)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of phase conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (phase conductor))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Construction of Street Lighting conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Number of wires (Street Lighting conductor))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.1(Manufacturer's Identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2(Cable Identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

-
Included w.e.f 22.07.2025 Exclusion: Cl 10.1 d) ii) Melt flow index, Cl 10.1 d) iv) Vicat softening point, Cl 10.1 d) v) Environmental stress cracking

5526

Sleen India Biz venture Private Limited, Agra

9139736

IS 18340 (2023)

Vinyl Sulphone - Specification

Vinyl Sulphone

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	250	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	3000	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	6000	-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	3000	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	4000	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	4000	-
Cl-4.2(Marking)	-	250	-
Cl-3.1(Description)	-	0	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	0	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	0	-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	0	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	0	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	0	-
Cl-4.2(Marking)	-	0	-

-
Included w.e.f 30.06.2025

5527

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

Class A&B/Type-1a,1b&2/5ml to 2000ml

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	500	-
Table-1(Overall height)	-	500	-
Table-1(Distance from top of scale to top of cylinder)	-	500	-
Table-1(Internal height to highest graduation line)	-	500	-
Table-1(Sub-divisions)	-	500	-
Table-1(capacity at lowest graduation line)	-	500	-
Cl-9.1(Wall thickness)	-	500	-
Cl-9.2(Stability)	-	500	-
Cl-9.3(Base)	-	500	-
Cl-9.4(Rim and spout)	-	500	-
Cl-9.5(Neck and stopper)	-	500	-
Cl-9.6, Table-2(Nominal capacity)	-	500	-
Cl-9.6, Table-2(Overall height)	-	500	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	500	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	500	-
Cl-9.6, Table-2(Sub divisions)	-	500	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	500	-
Cl-10.1(Graduation)	-	500	-
Cl-10.2(Figuring)	-	500	-
Cl-11(Accuracy testing)	-	1000	-
Cl-13(Visibility of graduation lines, figures and marking)	-	500	-
Clause. 8.0(Material)	-	1000	-
Table- 1(Max. Permissible Error (Class- a))	-	500	-
Table- 1(Max. Permissible Error (Class- b))	-	500	-
Table- 2(Max. Permissible Error (Type-2))	-	500	-

23 May, 2028

-
Included w.e.f 12.09.2025

5528

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

Class-A & B/1 ml to 1000 ml

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	500	-
Table 1(Nominal Capacity)	-	500	-
Table 1(Internal Neck Diameter)	-	500	-
Table 1(Distance of graduation line)	-	500	-
Table 1(Overall Height)	-	500	-
Table 1(Bulb Diameter)	-	500	-
Table 1(Base Diameter)	-	500	-
Table 1(Wall Thickness)	-	500	-
Table 1(Ground joint k4)	-	500	-
Table 1(Ground joint k6)	-	500	-
8.3(Shape)	-	500	-
8.4(Neck)	-	500	-
8.5(Stopper)	-	500	-
8.6(Dimensions)	-	500	-
9.0(Graduation Line)	-	500	-
Table-2(Nominal capacity)	-	500	-
Table-2(Internal neck diameter)	-	500	-
Table-2(Distance of graduation line 1))	-	500	-
Table-2(Overall height 2))	-	500	-
Table-2(Bulb diameter)	-	500	-
Table-2(Base diameter)	-	500	-
Table-2(Wall thickness)	-	500	-
Table-2(Ground joint 3) k4)	-	500	-
Table-2(Ground joint 3) k6)	-	500	-
12.1(Visibility of graduation line, figures and marking)	-	500	-
12.2(Visibility of graduation line, figures and marking)	-	500	-
Clause. 7.0(Accuracy)	-	500	-

23 May, 2028

-
Included w.e.f 12.09.2025

5529

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

ALL

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-

08 May, 2028

-
Included w.e.f 04.08.2025

5530

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 15462 (2019)

Polymer modified bitumen (Pmb) ? specification (First Revision)

PMB

277500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.5 (A) (i)(Softening point (R and B), °C, Min)	-	5000	-
Cl-6.5 (A) (ii)(Elastic recovery of half thread in ductilometer at 15°C, percent, Min)	-	10000	-
Cl-6.5 (A) (iii)(Flash point, COC, °C, Min)	-	2500	-
Cl-6.5 (A) (iv)(Viscosity at 150°C, Pa.s, Max)	-	10000	-
Cl-6.5 (A) (v)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 1.0 kPa, 25 mm Plate, 1 mm Gap, at 10 rad/s, at a temperature, °C)	-	25000	-
Cl-6.5 (A) (vi)(Phase Angle (δ), degree, Max)	-	5000	-
Cl-6.5 (A) (vii)(Separation, difference in softening point (R&B), °C, Max)	-	5000	-
Cl-6.5 (A) (viii)(FRAASS breaking1) point, °C, Max)	-	5000	-
Cl-6.5 (B) (i)(Loss in mass, percent, Max)	-	10000	-
Cl-6.5 (B) (ii)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 2.2 kPa, 25 mm Plate,1 mm Gap, at 10 rad/s at a temperature, °C)	-	30000	-
Cl-6.5 (B) (iii) (a)(Standard Traffic (S) Jnr3.2, Max 4.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	30000	-
Cl-6.5 (B) (iii) (b)(Heavy Traffic (H) Jnr3.2, Max 2 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	30000	-
Cl-6.5 (B) (iii) (c)(Very Heavy Traffic (V) Jnr3.2, Max 1 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	30000	-
Cl-6.5 (B) (iii) (d)(Extremely Heavy Traffic (E) Jnr3.2, Max 0.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	30000	-
Cl-6.5 (C) (i)(Complex modulus (G) multiplied by Sin delta (Gsin δ) as Max 6 000 kPa, 8 mm Plate, 2 mm Gap, at 10 rad/s at a temperature, °C)	-	50000	-
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
Cl-6.5 (A) (i)(Softening point (R and B), °C, Min)	-	0	Already given
Cl-6.5 (A) (ii)(Elastic recovery of half thread in ductilometer at 15°C, percent, Min)	-	0	Already given
Cl-6.5 (A) (iii)(Flash point, COC, °C, Min)	-	0	Already given
Cl-6.5 (A) (iv)(Viscosity at 150°C, Pa.s, Max)	-	0	Already given
Cl-6.5 (A) (v)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 1.0 kPa, 25 mm Plate, 1 mm Gap, at 10 rad/s, at a temperature, °C)	-	0	Already given
Cl-6.5 (A) (vi)(Phase Angle (δ), degree, Max)	-	0	Already given
Cl-6.5 (A) (vii)(Separation, difference in softening point (R&B), °C, Max)	-	0	Already given
Cl-6.5 (A) (viii)(FRAASS breaking1) point, °C, Max)	-	0	Already given
Cl-6.5 (B) (i)(Loss in mass, percent, Max)	-	0	Already given
Cl-6.5 (B) (ii)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 2.2 kPa, 25 mm Plate,1 mm Gap, at 10 rad/s at a temperature, °C)	-	0	Already given
Cl-6.5 (B) (iii) (a)(Standard Traffic (S) Jnr3.2, Max 4.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	Already given
Cl-6.5 (B) (iii) (b)(Heavy Traffic (H) Jnr3.2, Max 2 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	Already given
Cl-6.5 (B) (iii) (c)(Very Heavy Traffic (V) Jnr3.2, Max 1 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	Already given
Cl-6.5 (B) (iii) (d)(Extremely Heavy Traffic (E) Jnr3.2, Max 0.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	Already given
Cl-6.5 (C) (i)(Complex modulus (G) multiplied by Sin delta (Gsin δ) as Max 6 000 kPa, 8 mm Plate, 2 mm Gap, at 10 rad/s at a temperature, °C)	-	0	Already given
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	Already given
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	Already given
Clause 6.5 table 1(Flash point, all types)	-	0	Already given
4(Description)	-	0	Not a test
Cl-6.5 (A) (i)(Softening point (R and B), °C, Min)	-	0	-
Cl-6.5 (A) (ii)(Elastic recovery of half thread in ductilometer at 15°C, percent, Min)	-	0	-
Cl-6.5 (A) (iii)(Flash point, COC, °C, Min)	-	0	-
Cl-6.5 (A) (iv)(Viscosity at 150°C, Pa.s, Max)	-	0	-
Cl-6.5 (A) (v)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 1.0 kPa, 25 mm Plate, 1 mm Gap, at 10 rad/s, at a temperature, °C)	-	0	-
Cl-6.5 (A) (vi)(Phase Angle (δ), degree, Max)	-	0	-
Cl-6.5 (A) (vii)(Separation, difference in softening point (R&B), °C, Max)	-	0	-
Cl-6.5 (A) (viii)(FRAASS breaking1) point, °C, Max)	-	0	-
Cl-6.5 (B) (i)(Loss in mass, percent, Max)	-	0	-
Cl-6.5 (B) (ii)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 2.2 kPa, 25 mm Plate,1 mm Gap, at 10 rad/s at a temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (a)(Standard Traffic (S) Jnr3.2, Max 4.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (b)(Heavy Traffic (H) Jnr3.2, Max 2 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (c)(Very Heavy Traffic (V) Jnr3.2, Max 1 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (d)(Extremely Heavy Traffic (E) Jnr3.2, Max 0.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (C) (i)(Complex modulus (G) multiplied by Sin delta (Gsin δ) as Max 6 000 kPa, 8 mm Plate, 2 mm Gap, at 10 rad/s at a temperature, °C)	-	0	-
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
4(Description)	-	0	-
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
4(Description)	-	0	-
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
4(Description)	-	0	-
6.1(Material and Manufacture)	-	0	Test not available
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
4(Description)	-	0	-
Cl-6.5 (A) (i)(Softening point (R and B), °C, Min)	-	0	-
Cl-6.5 (A) (ii)(Elastic recovery of half thread in ductilometer at 15°C, percent, Min)	-	0	-
Cl-6.5 (A) (iii)(Flash point, COC, °C, Min)	-	0	-
Cl-6.5 (A) (iv)(Viscosity at 150°C, Pa.s, Max)	-	0	-
Cl-6.5 (A) (v)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 1.0 kPa, 25 mm Plate, 1 mm Gap, at 10 rad/s, at a temperature, °C)	-	0	-
Cl-6.5 (A) (vi)(Phase Angle (δ), degree, Max)	-	0	-
Cl-6.5 (A) (vii)(Separation, difference in softening point (R&B), °C, Max)	-	0	-
Cl-6.5 (A) (viii)(FRAASS breaking1) point, °C, Max)	-	0	-
Cl-6.5 (B) (i)(Loss in mass, percent, Max)	-	0	-
Cl-6.5 (B) (ii)(Complex modulus (G) divided by Sin delta (G/sin δ) as Min 2.2 kPa, 25 mm Plate,1 mm Gap, at 10 rad/s at a temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (a)(Standard Traffic (S) Jnr3.2, Max 4.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (b)(Heavy Traffic (H) Jnr3.2, Max 2 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (c)(Very Heavy Traffic (V) Jnr3.2, Max 1 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (B) (iii) (d)(Extremely Heavy Traffic (E) Jnr3.2, Max 0.5 kPa-1 Jnrdiff, Max 75 percent Test Temperature, °C)	-	0	-
Cl-6.5 (C) (i)(Complex modulus (G) multiplied by Sin delta (Gsin δ) as Max 6 000 kPa, 8 mm Plate, 2 mm Gap, at 10 rad/s at a temperature, °C)	-	0	-
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-
Clause 6.5 table 1(Loss in mass, all types)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 76-22)	-	0	-
Clause 6.5 table 1(Viscosity, PMB 82-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 64-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 70-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-10)	-	0	-
Clause 6.5 table 1(Softening point, PMB 76-22)	-	0	-
Clause 6.5 table 1(Softening point, PMB 82-10)	-	0	-
Clause 6.5 table 1(Flash point, all types)	-	0	-

-
Included w.e.f 04.09.2025

5531

BIS, Eastern Regional Laboratory (ERL)

None

IS 9294 (2023)

COLD-ROLLED STAINLESS STEEL STRIPS FOR RAZOR BLADES - Specification (First Revision)

All thickness

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Hardness test)	-
Cl-8.2 (hardness of cold-rolled)	-
Cl-9.1 (Microstructure)	-
Cl-13.1 (Width)	-
Cl-13.1 (Thickness)	-
Cl-13.2.2 (Edge Camber (Straightness))	-
Cl-13.2.3 (Edge Ripple)	-
Cl-14 (Surface Finish)	-
Cl-12 (Edge Condition)	-
Cl-6 (FREEDOM FROM DEFECTS)	-

-
Chemical: Except sulphur

5532

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	150	-
Cl-4.3.1(Size)	-	150	-
Cl-4.3.2(Weight)	-	250	-
Cl-4.4(Height of Upper)	-	250	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	800	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	1500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	1200	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1200	-
Cl-4.6.1(Material)	-	500	-
Cl-4.6.2(Tear Strength)	-	800	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1200	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	800	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1200	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	850	-
Cl-4.8.3(Water Absorption and Desorption)	-	850	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	500	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	800	-
Cl-4.12(Closing Thread)	-	800	-
Cl-4.13.2(Thickness)	-	500	-
Cl-4.13.3(Moulded Density)	-	800	-
Cl-4.13.4(Hardness)	-	800	-
Cl-4.13.5(Ageing Test)	-	1200	-
Cl-4.13.6(Tear Strength)	-	800	-
Cl-4.13.7(Abrasion Resistance)	-	1000	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	1300	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1600	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	800	-
Cl.4.5.3.2(Interlayer bond strength)	-	800	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	850	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
4.9 Insocks(Insock thickness)	-	500	-

-
Included w.e.f 04.08.2025

5533

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17262 (2022)

Textiles - Polyester partially oriented yarn (POY) - Specification (first revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	5500	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	2000	-
6.1 & 8.2 - Table -3, Sl no. 7(Unevenness of linear density, IS 7703 (Part 5))	-	9500	-
6.2- Table -4, Sl no. 1(Moisture regain, percent, Annex C)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	2000	-
6.2- Table -4, Sl no. 2(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	2000	-
6.2- Table -4, Sl no. 3(Water soluble matter, Percent, IS 3456)	-	2000	-
6.2- Table -4, Sl no. 4(Finish oil pick-up, percent, Annex D)	-	2000	-
6.2- Table -4, Sl no. 5(Phosphorus content, percent, Annex E)	-	2000	-
6.2- Table -4, Sl no. 6(Ultraviolet resistance, 500 h Percent retained strength, IS 13162 (Part 2))	-	5000	-
6.2- Table -4, Sl no. 8(Colour strength with reference to standard yarn, Percent, Annex F)	-	2000	-
6.2- Table -4, Sl no. 9(Colour difference with reference to standard yarn, measured as ΔE, Annex F)	-	2000	-
6.3(Freedom from Yarn Defects)	-	2000	-
6.4(Lustre/Brightness)	-	3500	-
6.5- Table -6, Sl no. 1(Light, Change in colour, IS/ISO 105-B01 or IS/ISO 105-B02)	-	5500	-
6.5- Table -6, Sl no. 2(Washing,IS/ISO 105-C10)	-	2500	-
6.5- Table -6, Sl no. 3(Rubbing, IS/ISO 105-X12)	-	2500	-
6.5- Table -6, Sl no. 4(Perspiration (acidic and alkaline), IS/ISO 105-E04)	-	2500	-
6.1 & 8.2 - Table -3, Sl no. 7 (a)(All deniers except microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 (b)(Microdeniers)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 7 ©(Dope dyed (all deniers))	-	1000	-
6.3(Freedom from Yarn Defects)	-	1000	-
6.4(Lustre/Brightness)	-	1000	-
6.5(Colour Fastness Properties of Dyed POY)	-	1000	-
6.1 Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 1(Nominal linear density, denier, IS 7703 (Part 1))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 2(Cross section)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 3(No. of filaments)	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 4(Declared average tenacity, gpd, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 5(Declared elongation, percent, IS 7703 (Part 2))	-	1000	-
6.1 & 8.2 - Table -3, Sl no. 6(Interlace as nips per metre, Annex B)	-	1000	-
6.5- Table -6, Sl no. 2 (a)(Washing, Change in colour IS/ISO 105-C10)	-	1000	-
6.5- Table -6, Sl no. 2 (b)(Washing, Staining IS/ISO 105-C11)	-	1000	-
6.5- Table -6, Sl no. 3 (a)(Rubbing, Dry IS/ISO 105-X12)	-	1000	-
6.5- Table -6, Sl no. 3 (b)(Rubbing, Wet IS/ISO 105-X13)	-	1000	-
6.5- Table -6, Sl no. 4 (a)(Perspiration (acidic and alkaline), chenge in colour IS/ISO 105-E04)	-	1000	-
6.5- Table -6, Sl no. 4 (b)(Perspiration (acidic and alkaline), staining IS/ISO 105-E05)	-	1000	-
6.6(Commercial mass)	-	1000	-
6.4 Table 5(Colour Fastness to Light)	-	1000	-
6.2 Table 4(Finish Oil Pickup, %)	-	1000	-
6.2 Table 4(Colour difference with reference to srtandard yarn, measured as DE)	-	1000	-
6.5 Table 6(Colour Fastness to light)	-	1000	-
6.5 Table 6(Colour Fastness to Rubbing)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.5 Table 6(Colour Fastness to perspiration)	-	1000	-
6.1 Table 3(Colour Fastness to washing , test 2)	-	1000	-
6.1 Table 3(Nominal Linear Density,denier)	-	1000	-
6.1 Table 3(Cross Section)	-	1000	-
6.1 Table 3(No of Filaments)	-	1000	-
6.1 Table 3(Average Tenacity,gpd)	-	1000	-
6.1 Table 3(Elongation ,Percent,Average)	-	1000	-
6.1 Table 3(Interlace as nips per meter)	-	1000	-
6.1 Table 3(Unevenness ,U Percent)	-	1000	-
6.1 Table 4(Water soluble matter %)	-	1000	-

19 Jul, 2027

-
Included w.e.f.22.07.2025 Excluding Cl. 6.2 Table 4 Antimicrobial activity value and Table 7

5534

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	15% discount for BIS projects.
8(Protection against access to live parts)	-	500	-
10(Power input and current)	-	2500	-
11(Heating)	-	3000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	1500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	500	-
15.101(Moisture resistance)	-	500	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101 to to 19.102(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1500	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1500	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	3000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
Cl.19.11.4.1(Electrostatic discharges)	-	0	Facility not available
Cl.19.11.4.2(Radiated fields)	-	0	Facility not available
Cl.19.11.4.3(Fast transient bursts)	-	0	Facility not available
Cl.19.11.4.4(Voltage surges)	-	0	Facility not available
Cl.19.11.4.5(Injected currents)	-	0	Facility not available
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	0	Facility not available
Cl.19.11.4.7(mains signals)	-	0	Facility not available
7(Marking and instructions)	-	0	Duplicate cl. no.
8(Protection against access to live parts)	-	0	Duplicate cl. no.
10(Power input and current)	-	0	Duplicate cl. no.
11(Heating)	-	0	Duplicate cl. no.
13.1 &13.2(Leakage current test)	-	0	Duplicate cl. no.
13.1 &13.3(Electric strength test)	-	0	Duplicate cl. no.
14(Transient overvoltages)	-	0	Duplicate cl. no.
15(Moisture resistance)	-	0	Duplicate cl. no.
15.3(Moisture resistance)	-	0	Duplicate cl. no.
15.101(Moisture resistance)	-	0	Duplicate cl. no.
16.1 &16.2(Leakage current test)	-	0	Duplicate cl. no.
16.1 & 16.3(Electric strength test)	-	0	Duplicate cl. no.
17(Overload protection of transformers and associated circuits)	-	0	Duplicate cl. no.
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	Duplicate cl. no.
19.101 to to 19.102(Abnormal operation)	-	0	Duplicate cl. no.
20(Stability and mechanical hazards)	-	0	Duplicate cl. no.
21(Mechanical strength)	-	0	Duplicate cl. no.
22(Construction)	-	0	Duplicate cl. no.
22.101(Construction)	-	0	Duplicate cl. no.
23(Internal wiring)	-	0	Duplicate cl. no.
24(Components)	-	0	Duplicate cl. no.
25("Supply connection and external flexible cords")	-	0	Duplicate cl. no.
26("Terminals for external conductors")	-	0	Duplicate cl. no.
27(Provision for earthing)	-	0	Duplicate cl. no.
28(Screws and connections)	-	0	Duplicate cl. no.
29("Clearances, creepage distances and solid insulation")	-	0	Duplicate cl. no.
30(Resistance to heat and fire)	-	0	Duplicate cl. no.
31(Resistance to rusting)	-	0	Duplicate cl. no.
32("Radiation, toxicity and similar hazards")	-	0	Duplicate cl. no.
Cl.19.11.4.1(Electrostatic discharges)	-	0	Duplicate cl. no.
Cl.19.11.4.2(Radiated fields)	-	0	Duplicate cl. no.
Cl.19.11.4.3(Fast transient bursts)	-	0	Duplicate cl. no.
Cl.19.11.4.4(Voltage surges)	-	0	Duplicate cl. no.
Cl.19.11.4.5(Injected currents)	-	0	Duplicate cl. no.
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	0	Duplicate cl. no.
Cl.19.11.4.7(mains signals)	-	0	Duplicate cl. no.

-
Included w.e.f.18.08.2025 Excl: Abnormal operation (Cl.19.11.4.1 to 19.11.4.4)

5535

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 73 (2013)

Paving bitumen - Specification (Fourth Revision)

VG 10, VG 20, VG 30, VG 40

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 Table 1(Penetration at 25°C, VG 10 )	-	5000	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	5000	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	5000	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	2500	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	2500	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	5000	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	5000	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	5000	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	Already given
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	Already given
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	Already given
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	Already given
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	Already given
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	Already given
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	Already given
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	Already given
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	Already given
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	Already given
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	Already given
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	Already given
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	Already given
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	Already given
6.1(Description)	-	0	Not a test
6.1(Description)	-	0	Already given
6.1(Description)	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	Already given
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	Already given
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	Already given
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	Already given
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	Already given
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	Already given
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	Already given
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	Already given
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	Already given
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	-
6.1(Description)	-	0	-
6.1(Description)	-	0	-
6.1(Description)	-	0	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 10 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C , VG 20 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 30 )	-	0	-
6.2 Table 1(Absolute viscosity at 60°C, VG 40 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 10 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 20 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 30 )	-	0	-
6.2 Table 1(Kinematic viscosity at 135°C, VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test:a) Viscosity ratio at 60°C, All Grades)	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 40 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 30 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm , VG 20 )	-	0	-
6.2 Table 1(Tests on residue from rolling thin film oven test: b) Ductility at 25°C, cm VG 10 )	-	0	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	-
6.2 Table 1(Penetration at 25°C,VG 40 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 30 )	-	0	-
6.2 Table 1(Penetration at 25°C, VG 20)	-	0	-
6.2 Table 1(Penetration at 25°C, VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 10 )	-	0	-
6.2 Table 1(Softening point (R&B) , VG 20 )	-	0	-
6.2 Table 1(Softening point (R&B), VG 30 )	-	0	-
6.2 Table 1(Softening point (R&B),VG 40 )	-	0	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	-
6.2 Table 1(Solubility in trichloroethylene, All Grades)	-	0	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	-
6.2 Table 1(Flash point (Cleveland open cup), All Grades)	-	0	-
6.1(Description)	-	0	-
6.1(Description)	-	0	-
6.1(Description)	-	0	-

-
Included w.e.f.07.08.2025

5536

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

25300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	200	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1500	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	500	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	2000	-
Cl.25 IS 15787:2008(Resistance to heat )	-	2000	-
Cl.24 IS 15787:2008(Mechanical strength)	-	2000	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	500	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	500	-
Cl.21 IS 15787:2008(Normal operation )	-	3500	-
Cl.20 IS 15787:2008(Making & Breaking )	-	500	-
Cl.19 IS 15787:2008(Temperature rise )	-	500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1000	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	500	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1500	-
Cl.12 IS 15787:2008(Terminals)	-	1500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	-
Cl.9 IS 15787:2008(Checking of dimension)	-	1000	-
Cl.8 IS 15787:2008(Marking )	-	500	-
Cl.7 IS 15787:2008(Classification)	-	500	-
Cl.6 IS 15787:2008(Ratings )	-	100	-

31 Dec, 2029

-
Included w.e.f 30.06.2025

5537

BIS, Eastern Regional Laboratory (ERL)

None

IS 16088 (2012)

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 IS 12235 (Part 1) Table 1 (Mean outside Diameter)	-
7.1.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 1 (Wall Thickness )	-
9.1 (Visual Appearance)	-
7.1.3 (Length)	-
8 (Pipe Ends)	-
9.2 IS 12235 (Part 3) (Opacity)	-
9.3 (Reversion test : )	-
9.4 (Vicat Softening temperature: )	-
9.5 (Density)	-
10.2 (resistance to external blows at 0 deg c)	-
10.4 IS 12235(Part 19) (Tensile Strength : )	-

-
Except Short term test (cl. 10.1.1), Long Term Test (cl. 10.1.2), Fire Exposure Test(cl 9.6), Flammability Test (cl 9.7), Flattening Test (cl 10.3 ), Kinking Resistance Test(Cl 10.5), CPVC Fire sprinkler pipes and fitting (cl. 10.6).

5538

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	200	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	100	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	200	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	200	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	200	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	100	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-

01 May, 2028

-
Included w.e.f 13.10.2025

5539

Samridhi Test House Pvt. Ltd.

8184706

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

Flat transparent sheet glass

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	100	-
4.1(Material)	-	700	-
4.1.1(Material)	-	700	-
4.2-Table 1 & Cl 5.1(Thickness )	-	1500	-
4.2-Table 1(Length )	-	1700	-
4.2-Table 1(Width)	-	1500	-
4.3-Table 2-i(Gaseous inclusion)	-	900	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	1100	-
4.3-Table 2-iii(Knots, dirts and stones)	-	1100	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	1100	-
4.3-Table 2-v & Cl 5.3(Bow)	-	1100	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	1300	-
4.3-Table 2-vii(Waviness)	-	1300	-
4.3-Table 2-viii(Sulphur stains)	-	1300	-
4.3-Table 2-ix(Corner breakage and chip)	-	1300	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	1300	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	1300	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	1300	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	1300	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Central area)	-	1300	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Outer area)	-	1300	-
3.1(CLASSIFICATION)	-	0	-
4.1(Material)	-	0	-
4.1.1(Material)	-	0	-
4.2-Table 1 & Cl 5.1(Thickness )	-	0	-
4.2-Table 1(Length )	-	0	-
4.2-Table 1(Width)	-	0	-
4.3-Table 2-i(Gaseous inclusion)	-	0	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	0	-
4.3-Table 2-iii(Knots, dirts and stones)	-	0	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	0	-
4.3-Table 2-v & Cl 5.3(Bow)	-	0	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	0	-
4.3-Table 2-vii(Waviness)	-	0	-
4.3-Table 2-viii(Sulphur stains)	-	0	-
4.3-Table 2-ix(Corner breakage and chip)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Central area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Outer area)	-	0	-
3.1(CLASSIFICATION)	-	0	-
4.1(Material)	-	0	-
4.1.1(Material)	-	0	-
4.2-Table 1 & Cl 5.1(Thickness )	-	0	-
4.2-Table 1(Length )	-	0	-
4.2-Table 1(Width)	-	0	-
4.3-Table 2-i(Gaseous inclusion)	-	0	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	0	-
4.3-Table 2-iii(Knots, dirts and stones)	-	0	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	0	-
4.3-Table 2-v & Cl 5.3(Bow)	-	0	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	0	-
4.3-Table 2-vii(Waviness)	-	0	-
4.3-Table 2-viii(Sulphur stains)	-	0	-
4.3-Table 2-ix(Corner breakage and chip)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Central area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Outer area)	-	0	-
3.1(CLASSIFICATION)	-	0	-
4.1(Material)	-	0	-
4.1.1(Material)	-	0	-
4.2-Table 1 & Cl 5.1(Thickness )	-	0	-
4.2-Table 1(Length )	-	0	-
4.2-Table 1(Width)	-	0	-
4.3-Table 2-i(Gaseous inclusion)	-	0	-
4.3-Table 2-ii(Opaque gaseous inclusion)	-	0	-
4.3-Table 2-iii(Knots, dirts and stones)	-	0	-
4.3-Table 2-iv & Cl 5.2(Scratches, rubs and crush)	-	0	-
4.3-Table 2-v & Cl 5.3(Bow)	-	0	-
4.3-Table 2-vi & Cl 5.4(Reams, Light Strings and lines)	-	0	-
4.3-Table 2-vii(Waviness)	-	0	-
4.3-Table 2-viii(Sulphur stains)	-	0	-
4.3-Table 2-ix(Corner breakage and chip)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Central area)	-	0	-
4.3.1-Table 2A-i(Allowable Cluster of Defects for AA Quality at Outer area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Central area)	-	0	-
4.3.1-Table 2A-ii(Allowable Cluster of Defects for A Quality at Outer area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Central area)	-	0	-
4.3.1-Table 2A-iii(Allowable Cluster of Defects for B Quality at Outer area)	-	0	-

-
Included w.e.f. 04.08.2025

5540

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

All Designation

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	1000	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	1000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	3000	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	3000	-
7(Dimension - IS 3965)	-	1000	-
11(Marking)	-	0	-
Table-1, Clause - 5.1(Copper)	-	3000	-
Table-1, Clause - 5.1(Iron)	-	3000	-
Table-1, Clause - 5.1(Magnesium)	-	3000	-
Table-1, Clause - 5.1(Manganese)	-	3000	-
Table-1, Clause - 5.1(Titanium)	-	3000	-
Table-1, Clause - 5.1(Silicon)	-	3000	-
Table-1, Clause - 5.1(Chromium)	-	3000	-
Table-1, Clause - 5.1(Zinc)	-	3000	-
Cl. 4(Freedom from Defects)	-	0	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	0	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	0	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	0	-
7(Dimension - IS 3965)	-	0	-
11(Marking)	-	0	-
Table-1, Clause - 5.1(Copper)	-	0	-
Table-1, Clause - 5.1(Iron)	-	0	-
Table-1, Clause - 5.1(Magnesium)	-	0	-
Table-1, Clause - 5.1(Manganese)	-	0	-
Table-1, Clause - 5.1(Titanium)	-	0	-
Table-1, Clause - 5.1(Silicon)	-	0	-
Table-1, Clause - 5.1(Chromium)	-	0	-
Table-1, Clause - 5.1(Zinc)	-	0	-

27 May, 2028

-
Included w.e.f.07.07.2025

5541

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
3.3(Specifications)	-	5000	-
3.5(Safety specification)	-	25000	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
4(Marking)	-	1000	-
5(Operating Life Test)	-	5000	-
3.1, Table-1, i) a)(Hardware specification)	-	5000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
3.1, Table-1, i) g)(Teletext)	-	5000	-
3.1, Table-1, i) h)(Multi-language support)	-	5000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
3.1, Table-1, i) n)(Data services)	-	5000	-
3.1, Table-1, i) p)(OSD)	-	5000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
3.1, Table-1, i) s)(Time)	-	5000	-
3.1, Table-1, i) t)(Digital TV output)	-	5000	-
3.4, Table-2, i) b)(Frequency)	-	5000	-
3.4, Table-2, i) a)(Input voltage range)	-	5000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
3.1, Table-1, ii) c)(Network evolution)	-	5000	-
3.4, Table-2, iii) c)(RF input impedance)	-	5000	-
3.1, Table-1, ii) d)(Services available)	-	5000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
3.1, Table-1, ii) h)(Hidden Services)	-	5000	-
3.4, Table-2, iii) b)(Input frequency range)	-	5000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
3.1, Table-1, ii) k)(RF input signal)	-	5000	-
3.1, Table-1, ii) m)(LNB supply current)	-	5000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
3.1, Table-1, ii) p)(LNB Control)	-	5000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
3.4, Table-2, iv) c)(RF input impedance)	-	5000	-
3.4, Table-2, iv) b)(Input frequency range)	-	5000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
3.4, Table-2, v)(Symbol rate)	-	5000	-
3.4, Table-2, vi)(RF input return loss)	-	5000	-
3.4, Table-2, vii)(DisEqC)	-	5000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
3.4, Table-2, ix)(Operating humidity range)	-	5000	-
3.4, Table-2, x)(Power consumption)	-	5000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
3.1, Table-1, v) a)(Remote Control)	-	5000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
3.1, Table-1, v) c)(Support package)	-	5000	-
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	0	-
3.3(Specifications)	-	0	-
3.5(Safety specification)	-	0	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	0	-
4(Marking)	-	0	-
5(Operating Life Test)	-	0	-
3.1, Table-1, i) a)(Hardware specification)	-	0	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	0	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	0	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	0	-
3.1, Table-1, i) e)(Active Format descriptors)	-	0	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	0	-
3.1, Table-1, i) g)(Teletext)	-	0	-
3.1, Table-1, i) h)(Multi-language support)	-	0	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	0	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	0	-
3.1, Table-1, i) m)(Service demultiplexing)	-	0	-
3.1, Table-1, i) n)(Data services)	-	0	-
3.1, Table-1, i) p)(OSD)	-	0	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	0	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	0	-
3.1, Table-1, i) s)(Time)	-	0	-
3.1, Table-1, i) t)(Digital TV output)	-	0	-
3.4, Table-2, i) b)(Frequency)	-	0	-
3.4, Table-2, i) a)(Input voltage range)	-	0	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	0	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	0	-
3.1, Table-1, ii) c)(Network evolution)	-	0	-
3.4, Table-2, iii) c)(RF input impedance)	-	0	-
3.1, Table-1, ii) d)(Services available)	-	0	-
3.1, Table-1, ii) e)(Selection via Service List)	-	0	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	0	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	0	-
3.1, Table-1, ii) h)(Hidden Services)	-	0	-
3.4, Table-2, iii) b)(Input frequency range)	-	0	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	0	-
3.1, Table-1, ii) k)(RF input signal)	-	0	-
3.1, Table-1, ii) m)(LNB supply current)	-	0	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	0	-
3.1, Table-1, ii) p)(LNB Control)	-	0	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	0	-
3.4, Table-2, iii) a)(Input level per carrier)	-	0	-
3.4, Table-2, iv) c)(RF input impedance)	-	0	-
3.4, Table-2, iv) b)(Input frequency range)	-	0	-
3.4, Table-2, iv) a)(Input level per carrier)	-	0	-
3.4, Table-2, v)(Symbol rate)	-	0	-
3.4, Table-2, vi)(RF input return loss)	-	0	-
3.4, Table-2, vii)(DisEqC)	-	0	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	0	-
3.4, Table-2, ix)(Operating humidity range)	-	0	-
3.4, Table-2, x)(Power consumption)	-	0	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	0	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	0	-
3.1, Table-1, v) a)(Remote Control)	-	0	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	0	-
3.1, Table-1, v) c)(Support package)	-	0	-

08 May, 2028

-
Included w.e.f. 31.07.2025 Exclusion: 3.5 (Safety specification)

5542

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All Type

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	12500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	12500	-
Cl. 4 (b)(Condition - IS 737)	-	12500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	12500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	12500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	12500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	12500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	12500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	12500	-
Cl. 6(Freedom from Defects - IS 737)	-	12500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	12500	-
Cl. 7(Al - IS 504)	-	12500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	12500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	12500	-
Cl. 8.2(Bend Test - IS 1599)	-	12500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	12500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	12500	-
Cl. 11(Selection of Test Samples - IS 737)	-	12500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	12500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	12500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	12500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	12500	-
Cl. 13.1(Marking - IS 737)	-	12500	-

02 Jun, 2027

-
Included w.e.f 30.06.2025

5543

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 9283 (2024)

LINE OPERATED A.C. MOTORS FOR SUBMERSIBLE PUMPSETS - SPECIFICATION (THIRD REVISION)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As Per Clause 5.1.2 Table 1(Material)	-	100	-
As Per Clause 5.1.3(Construction-General)	-	100	-
As per Clause 5.1.4(Construction-General)	-	100	-
As per Clause 5.2.1(Earthing)	-	100	-
As per Clause 5.4.1(Construction-Type of cable & Size of conductor of cable)	-	100	-
As per Clause 5.4.2(Construction-Length of cable)	-	100	-
As per Clause 5.4.3(Construction-Joint in Cable)	-	100	-
As per Clause 5.5(Finish of Bearings)	-	100	-
As per Clause 5.6(Balancing of Rotor)	-	100	-
As per Clause 7.1(Dimensions of Motors)	-	100	-
As per Clause 7.2(Tolerances)	-	100	-
As per Clause 12.1(Efficiency)	-	500	-
As per Clause 12.1(Efficiency)	-	500	-
As per Clause 13(Terminal Marking)	-	100	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.2(Rating Plate)	-	500	-
As per Clause 16.1(a),21(Insulationresistance test(Before HV Test))	-	750	-
As per Clause 16.1(a),21(Insulationresistance test(After HV Test))	-	750	-
As per Clause 16.1(b),20(High voltage test)	-	750	-
As per Clause 16.[c](Measurement of stator resistance)	-	500	-
As per Clause 16.(d)(No Load Test)	-	500	-
As per Clause 16.(e)(Reduced voltage running up test at no load)	-	250	-
As per Clause 16.(f)(Locked rotor readings of voltage, current, power input and torque of motors)	-	250	-
As per Clause 16.(g)(Full load reading of voltage, current, power input, speed and frequency)	-	2000	-
As per Clause 16.(h),11(Performance characteristics)	-	500	-
As per Clause 16.(j),19(Temperature rise test at rated voltage)	-	500	-
As per Clause 16.(k),19(Temperature rise test at reduced voltage)	-	500	-
As per Clause 16.(m),18(Momentary Overload Test)	-	800	-
As per Clause 16.(n),22(Leakage Current Test at rated voltage at no load)	-	250	-

31 Dec, 2029

-
Included w.e.f 23.06.2025

5544

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	-
Cl 5.2.2, Table 4(" Height of upper ")	-	250	-
Cl 5.2.3(Heel area)	-	250	-
Cl 5.3.1.1(Construction of whole footwear)	-	150	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	-
Cl 5.3.2.1(Toe protection - general)	-	250	-
Cl 5.3.2.2(Internal length)	-	800	-
Cl 5.3.2.3(Width of toecap flange)	-	250	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	2500	-
Cl 5.3.2.6(Impact resistance)	-	1200	-
Cl 5.3.2.7(Compression resistance)	-	1200	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	-
Cl 5.3.7(Seam strength)	-	800	-
Cl 5.3.8(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	250	-
Cl 5.4.2(Thickness)	-	250	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	1200	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	-
Cl 5.4.7(Resistance to hydrolysis)	-	2000	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	-
Cl 5.7.2(Water permeability of insock)	-	500	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	850	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	850	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	250	-
Cl 5.8.2.2(Cleated area)	-	250	-
Cl 5.8.2.3(Cleat height)	-	250	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	150	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	150	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	150	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	150	-
Cl 6.2.8.3(Resistance to cutting)	-	1200	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	-
Cl 6.4.3.2(Design of Ladder grip)	-	250	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	150	-

-
Included w.e.f. 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

5545

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 17153 (2019)

Domestic gas stoves for use with piped natural gas (PNG) - Specification

all

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26(Burner-5)	-	42000	Single Burner SS Body – Rs.20000/- Glass Top – Rs. 23000/- Double Burner SS Body – Rs. 25000/- Glass Top – Rs. 28000/- Three Burner SS Body – Rs. 30000/- Glass Top – Rs. 33000/- Four Burner SS Body – Rs. 35000/- Glass Top – Rs. 38000/- Five Burner SS Body
26(Burner-4)	-	42000	-
26(Burner-3)	-	42000	-
26(Burner-2)	-	42000	-
26(Burner-1)	-	42000	-
25.2(With the Burner lighted on full on, the flame temperature at a height of H+20 mm)	-	42000	-
25.1(Temperature of synthetic rubber diaphragm in gas carrying components)	-	42000	-
25.1(Temperature of the surface in normal use)	-	42000	-
25.1(Temperature of the portion of the surface other than the working surface likely to be touched accidentally.)	-	42000	-
25.1(Rise of Temperature above room temperature in (Wall, Floor, Ceiling), after two hours of operation)	-	42000	-
24(Burner-5)	-	42000	-
24(Burner-4)	-	42000	-
24(Burner-3)	-	42000	-
24(Burner-2)	-	42000	-
24(Burner-1)	-	42000	-
23(When operated at pressure 20-25 gf/cm2 , there shall be no extinction of flame on any of the burneroperating at the max of the burner, when the appliance is placed in normal current of air with velocity of 2 m/s.)	-	42000	-
22(When operated at pressure 20-25 gf/cm2 , for one at full on position, no soot shall be deposited on burner or on the bottom of the vessel.)	-	42000	-
21(When operated at pressure 20-25 gf/cm2 for half an hour flame shall be reduced to simmer and then brought back to full on, operation shall be repeated five times, no flash back shall occur during the test.)	-	42000	-
20(Ignition of Burner flame, their operation and turning off shall not give rise to undue excessive noise during the operation.)	-	42000	-
19.3(Fixed Min Pilot flame shall be sufficient to relight the main burner at the 21 mbar gas inlet pressure.)	-	42000	-
19.2(Pilot Flame shall be Stable without lifting or soot deposition at gas inlet pressure from 20-25 gf/cm2)	-	42000	-
19.1.1(When the gas consumption of the burner is reduced to simmer after operating half an hour on full ON flame shall not extinguish, blow off, strike back or form soot at 21 mbar gas inlet pressure.)	-	42000	-
19.1(It shall be possible to operate stove with taps fully open at gas inlet pressure , without the flame extinguishing, blowing off or striking back and without the formation of soot.)	-	42000	-
18.4.1(The flame failure device if provided shall confirm to IS:5116)	-	42000	-
18.3(When the burner is ignited from a pilot flame and/or by an electric/electronic method, the ignition and flame travel shall be smooth at pressure……..)	-	42000	-
18.2(if the flame is applied to any of the outer row of the burner ports when the gas is flowing , flame travel shall be complete……..)	-	42000	-
18.1(Where the burner or burners are lighted by automatic ignition (Battery of flint operated or by a pilot flame , it shall not be possible for gas to be admitted to the main burner without being smoothly ignited by the pilot flame. Each burner should be at room temperature at the begining of the test and should be tested in turn. )	-	42000	-
18.1(There shall be easy and safe access of lighting each burner by matchstick and it shall be easy to see that the burner is lighted)	-	42000	-
17.3(When the gas consumption of the burner is reduced to simmer, the flame shall not extinguish, blow off, strike back or form soot, when tested with commercial PNG at 21 mbar gas inlet pressure.)	-	42000	-
17.2(Burner-5)	-	42000	-
17.2(Burner-4)	-	42000	-
17.2(Burner-3)	-	42000	-
17.2(Burner-2)	-	42000	-
17.2(Burner-1)	-	42000	-
17.2(Sim Rating Declared)	-	42000	-
17.1.2(Total Gas Consumption)	-	42000	-
17.1(Burner-5)	-	42000	-
17.1(Burner-4)	-	42000	-
17.1( Burner-3)	-	42000	-
17.1( Burner-2)	-	42000	-
17.1( Burner-1)	-	42000	-
17.1(Rating Declared)	-	42000	-
15.2(Fragmentation test of the toughened glass to )	-	42000	-
15.1(Verification of the strength of the gas stove surface of the toughened glass top against thermal stress)	-	42000	-
15(Width wise deflection)	-	42000	-
15(Length wise deflection)	-	42000	-
15(Vertical Deflection)	-	42000	-
14.5(The position of the gas inlet shall allow connection to a gas supply on either side of the appliances, the rear end or bottom is also permitted. It shall be possible to change gas inlet from one side to other side easily by standard tools.)	-	42000	-
14.4(Any other connection made from the main gas rail shall be only metallic.)	-	42000	-
14.4(The external surface of the gas rail shall be treated to resist corrosion)	-	42000	-
14.4(The wall thickness of main gas rail)	-	42000	-
14.4(The pipe/tube used for main gas rail shall be of mild steel)	-	42000	-
14.3(Screwed gas Inlet and outlet connections shall confirm to IS:554, Declared by party)	-	42000	-
14.2((e))	-	42000	-
14.2((d))	-	42000	-
14.2(( c))	-	42000	-
14.2((b))	-	42000	-
14.2(Shape of Nozzles as per fig. 3 : (a))	-	42000	-
14.2(Where Nozzles for flexible tubing are fitted, they shall be so positioned as to facilitate fitting of the tubing and also to prevent heating of the tubing to more than 60°C)	-	42000	-
14.1(Nozzle shall be machined from free cutting brass, MS, SS, Zinc)	-	42000	-
13(All gas carrying parts of the appliances should be sound and these parts when connected to form complete assembly shall also be sound against any gas leakage. The complete assembly shall be checked at 14.71 kN/m²)	-	42000	-
12.1.2(The material of the pan support shall be metallic.)	-	42000	-
12.1.1(Loose Pan support shall be so designed that it is not possible to place them firmly in other than proper position)	-	42000	-
12.1(Prongs of the Support shall have suitable taper to accommodate round bottom pans.)	-	42000	-
12.1(The design of the pan supports shall be such that it is practicable to support a pan of 100 mm diameter over at least one top burner without the use of loose rings and such that 125 mm diameter vessel remains stable over each burner. )	-	42000	-
11.7(The appliance comprising two or more burners shall include one burner having a rating of at least 1450 kCal/hr, based on net calorific value of the gas (When using domestic PNG))	-	42000	-
11.6(For Burners having centre flame, provision shall be made to protect the centre flame from pan resting directly on burner top and smothering the centre flame. )	-	42000	-
11.5(If the burner is made and assembled in two or more parts they shall be so designed to provide proper self locating arrangement so that they are always reassembled to its original design preventing any maladjustment in their assembly. This shall also be applicable for primary air regulators.)	-	42000	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place.)	-	42000	-
11.3(The tightness of the joints in the burner assembly shall not be depended upon adhesives or any kind of packing.)	-	42000	-
11.2(The Burner supports shall be rigid and shall be fixed in their place. Their construction shall ensure the stability of the burners and shall prevent their undue movement in a horizontal plane.)	-	42000	-
11.1(The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	42000	-
10.2(The Size of the jet in Litres per hour of flow of PNG at STP conditions shall be impressed upon it.)	-	42000	-
10.1.1(Injector Jet shall be made of metal , with or without ceramic tip. The melting point of the metal shall not be less than 650°C)	-	42000	-
10.1(Dimension- Threads)	-	42000	-
10.1(Dimension- Projection from the face of mounting, Nominal)	-	42000	-
10.1(Dimension- Across Flats)	-	42000	-
10.1(The Injector Jets shall be fixed calibrated type and it shall not be possible to loosen them without the use of tools.)	-	42000	-
9.12(The noting means adopted shall be sufficiently robust to withstand normal use without distortion or damage.)	-	42000	-
9.11.1(Simmer flame shall be obtained by fixed simmer orifice.)	-	42000	-
9.11(Taps having an 'OFF' position shall have positive stops at the 'OFF' and simmer position except that special purpose taps (for appliance incorporating auto or self ignition device))	-	42000	-
9.1(Screw-down valves shall be so designed that it is impossible to withdraw completely the valve stem in the normal operation of the tap.)	-	42000	-
9.9(Screws nuts etc., which regulate the tension of taps valve or springs shall not loosen in operation of the appliance. It shall not be possible to cause a leak during normal manual operation of tap.)	-	42000	-
9.8(All controls or taps shall be easy to operate at all temperatures normally attained in use)	-	42000	-
9.7(C1)	-	42000	-
9.7(B1)	-	42000	-
9.7(A1)	-	42000	-
9.7(D)	-	42000	-
9.7(C)	-	42000	-
9.7(B)	-	42000	-
9.7(A)	-	42000	-
9.7(Dimension of Taper plugs in off position:)	-	42000	-
9.6(Each taper plug tap shall be spring loaded to maintain a gas tight fit. Helical springs fitted in taps and valves shall have flattened ends, which shall be rounded before fitting.)	-	42000	-
9.5.1(Taps shall be lubricated with suitable grease, resistant to the action of the gas and capable of operating at the maximum temperature of 110°C.)	-	42000	-
9.5(Taps shall be so made that in normal use and reasonable application of lubricant, the gas passages do not become blocked.)	-	42000	-
9.4(Preferably all taps (Excluding pilot taps) should lock in the off position, but in all cases it shall be impossible to handle or tap to move accidentally…. )	-	42000	-
9.3(When Taps are fitted with adjustable stops, there shall be means of looking the stops in position. If screws are used for this purpose, they shall not lead into gas passages.)	-	42000	-
9.2(Taps shall be designed so that when placed in any position and viewed from a distance of 3 m, will definitely indicate whether the valve is open, closed or in intermediate position.)	-	42000	-
9.2(All Taps shall close in the same direction. The direction of rotation of knob from off-on-simmer shall be anti-clockwise.)	-	42000	-
9.2(The 'ON' "OFF" and any fixed position of tap handles shall be clearly and durably indicated or shall be obvious by design or position else some indication shall be provided.)	-	42000	-
9.1(The Appliance shall have at least one tap for each burner)	-	42000	-
8.7(The external Finished surfaces shall be easily cleanable.)	-	42000	-
8.6(All springs, screws, nuts and bolts which are visible or to be removed for maintenance, shall be of corrosion-resistant material or treated to resist corrosion.)	-	42000	-
8.5(Concealed Gas Supplies: Concealed tubular fittings liable to corrode shall be protected by bituminous paint or other equally protective material.)	-	42000	-
8.4 (b)(Resistance to Heating)	-	42000	-
8.4 (a)(Resistance to Abrasion)	-	42000	-
8.3.3(Corrosion Resistance test)	-	42000	-
8.3.2(Adhesion Test)	-	42000	-
8.3.1(Thickness of Chromium coating)	-	42000	-
8.3(Thickness of Nickel coating of the top flat surface of the body of electroplated stove.)	-	42000	-
8.2(Vitreous enameled component shall meet the requirement when tested in accordance with Annex E of IS:5116)	-	42000	-
8.1(The finishes shall, on visual examination, show no defects, such as pin-holes, blisters, roughness or exposed area of metal, which give rise to undualy rapid deterioration in use.)	-	42000	-
8.1(Parts, which will come in contact with the foodstuff, shall be capable of being hygienically cleaned.)	-	42000	-
8.1(The Finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use.)	-	42000	-
7(Rigidity and Stability : The appliance shall be so designed that it remains stable and shall not be easily overturned.)	-	42000	-
6.7(Thickness of Sheet)	-	42000	-
6.6(All nuts, bolts and fittings having spanner flats shall be capable of being moved by suitable spanner or be readily accessible to an adjustable spanner.)	-	42000	-
6.5(Parts, which are intented to be removable by the user, shall be easy to replace correctly and difficult to assemble incorrectly.)	-	42000	-
6.4(Burners and parts of Burner only of same rating , model and make shall be interchangeable or replaceable without effecting performance.)	-	42000	-
6.3(Burner ports shall be so designed and located that in normal use spilage of food shall not cause internal fouling of mixing tube and or blockage of injector jet.)	-	42000	-
6.2(The relative distance between the centres of the adjoining burner-)	-	42000	-
6.2(the parts of the burner shall not become disconnected during operation of the appliance.)	-	42000	-
6.1(The appliance, including all the component parts, shall be easy to clean and maintain in good working order, there shall be easy access to the accessories and controls for maintenance and adjustment.)	-	42000	-
5.8.3(The number of glass fragments contained in a 50 mm side square, when tested as Cl. 15.2)	-	42000	-
5.8.3(Toughened glass shall fragment into small particles.)	-	42000	-
5.8.2(Pan support for an uncovered burner in contact with the glass ceramic surface.The surface area of the pan support in contact with the glass ceramic)	-	42000	-
5.8.2(The toughened glass top shall ensure durability against damage in normal use)	-	42000	-
5.8.2(The means to hold the glass top of the gas stove shall not allow any stress or risk of mechanical change to the glass top.)	-	42000	-
5.8.1(Toughened glass top including their edges or corners shall not have fissures or scratches)	-	42000	-
5.7(Drip tray if provided shall be made of non-corrosive material)	-	42000	-
5.6(Meltiing poin of metal used in oven, griller or auxilliary or anyother combination)	-	42000	-
5.6(Melting point of metal for burner top)	-	42000	-
5.5(The main body of the burner including mixer head, mixing tube and burner head shall be of substantial and durable construction)	-	42000	-
5.4(Change in weight or volume of a non metallic material, when immerse in n-Pentane or PNG for 72 hours)	-	42000	-
5.3(Mercurous Nitrate test for copper and copper alloy Parts)	-	42000	-
5.2(The burner parts shall not melt or distort when burner is operated with flames flashed back for half an hour in the mixing tube.)	-	42000	-
5.1.1(Plastic components which are liable to heating (For example, tap handles push buttons etc.) shall be free of fissures, distortion, blemishes and discolouration)	-	42000	-
5.1(The use of low pressure rubber or plastic tubing fitted or pushed on nozzle is not recommended.)	-	42000	-
5.1(If flexible tubing is used, it shall not be fitted on the outlet side of any control which is capable of cutting of the gas completely, except where screwed metal connection are fitted.)	-	42000	-
5.1(The appliance shall be free from swarf, grit and other foreign matters.)	-	42000	-
4.3(No pressure regulator shall be included as part of the stove.)	-	42000	-
4.2(Rivets, Fastening screws and plugs , etc. shall not lead into gas passages.)	-	42000	-
4.1(The construction of all the parts of equipment shall be sound and of high standard of workmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	42000	-
4.1(General)	-	42000	-
4.2(General)	-	42000	-
4.3(General)	-	42000	-
5.1(Materials)	-	42000	-
5.1(Materials)	-	42000	-
5.1(Materials)	-	42000	-
5.1(Materials)	-	42000	-
5.1.1(Materials)	-	42000	-
5.2(Materials)	-	42000	-
5.3(Materials)	-	42000	-
5.4(Materials)	-	42000	-
5.5(Materials)	-	42000	-
5.5(Materials)	-	42000	-
5.5(Materials)	-	42000	-
5.7(Materials)	-	42000	-
5.8.1(Materials)	-	42000	-
26(Thermal Efficiency)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
26(Thermal Efficiency)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
26(Thermal Efficiency)	-	42000	-
5.8.2 (a)(Materials)	-	42000	-
26(Thermal Efficiency)	-	42000	-
5.8.2 (b)(Materials)	-	42000	-
26(Thermal Efficiency)	-	42000	-
5.8.2 (c )(Materials)	-	42000	-
25.2(Fire Hazard and Limiting Temperature)	-	42000	-
5.8.2 (d)(Materials)	-	42000	-
25.1(Fire Hazard and Limiting Temperature)	-	42000	-
5.8.2 (d)(Materials)	-	42000	-
25.1(Fire Hazard and Limiting Temperature)	-	42000	-
25.1(Fire Hazard and Limiting Temperature)	-	42000	-
5.8.2 (e)(Materials)	-	42000	-
25.1(Fire Hazard and Limiting Temperature)	-	42000	-
5.8.2 (e)(Materials)	-	42000	-
5.8.2 (e)(Materials)	-	42000	-
24.2(Combustion)	-	42000	-
5.8.2 (e)(Materials)	-	42000	-
24.1(Combustion)	-	42000	-
5.8.2 (e)(Materials)	-	42000	-
24.1(Combustion)	-	42000	-
5.8.3 (a)(Materials)	-	42000	-
23(Resistance to Draught)	-	42000	-
5.8.3 (b)(Materials)	-	42000	-
5.8.3 (c)(Materials)	-	42000	-
22(Formation of soot)	-	42000	-
21(Flash Back)	-	42000	-
5.8.3 (d)(Materials)	-	42000	-
20(Noise Control)	-	42000	-
5.8.3 (e)(Materials)	-	42000	-
5.8.3 (f)(Materials)	-	42000	-
19.3(Flame Stability)	-	42000	-
6.1(Design for Maintenance)	-	42000	-
19.2(Flame Stability)	-	42000	-
6.1(Design for Maintenance)	-	42000	-
19.1.1(Flame Stability)	-	42000	-
6.2(Design for Maintenance)	-	42000	-
6.2(Design for Maintenance)	-	42000	-
19.1(Flame Stability)	-	42000	-
6.3(Design for Maintenance)	-	42000	-
18.4(Ignition and Flame Travel)	-	42000	-
6.4(Design for Maintenance)	-	42000	-
18.3(Ignition and Flame Travel)	-	42000	-
6.5(Design for Maintenance)	-	42000	-
18.2(Ignition and Flame Travel)	-	42000	-
18.1(Ignition and Flame Travel)	-	42000	-
18.1(Ignition and Flame Travel)	-	42000	-
6.6(Design for Maintenance)	-	42000	-
17.0(Gas Consumption)	-	42000	-
6.7(Design for Maintenance)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-
9.11(Gas Taps)	-	42000	-
7.1(Rigidity and Stability)	-	42000	-
7.2(Rigidity and Stability)	-	42000	-
7.3(Rigidity and Stability)	-	42000	-
8.1(Workmanship and Finish)	-	42000	-
8.1(Workmanship and Finish)	-	42000	-
8.2 & 8.2.1(Workmanship and Finish)	-	42000	-
8.3(Workmanship and Finish)	-	42000	-
8.3(Workmanship and Finish)	-	42000	-
8.3.2(Workmanship and Finish)	-	42000	-
8.4 (a)(Workmanship and Finish)	-	42000	-
8.4 (b)(Workmanship and Finish)	-	42000	-
8.5(Workmanship and Finish)	-	42000	-
8.6(Workmanship and Finish)	-	42000	-
8.7(Workmanship and Finish)	-	42000	-
9.1(Gas Taps)	-	42000	-
9.2(Gas Taps)	-	42000	-
9.2(Gas Taps)	-	42000	-
9.2(Gas Taps)	-	42000	-
9.3(Gas Taps)	-	42000	-
9.4(Gas Taps)	-	42000	-
9.5(Gas Taps)	-	42000	-
9.11.1(Gas Taps)	-	42000	-
9.12(Gas Taps)	-	42000	-
10.1(Injector Jets)	-	42000	-
10.1 (a)(Injector Jets)	-	42000	-
10.1 (b)(Injector Jets)	-	42000	-
10.1 (c )(Injector Jets)	-	42000	-
10.1.1(Injector Jets)	-	42000	-
9.5.1(Gas Taps)	-	42000	-
10.2(Injector Jets)	-	42000	-
9.6(Gas Taps)	-	42000	-
11.1(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.2(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.3(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.4(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.5(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.6(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
11.7(Burners)	-	42000	-
9.7(Gas Taps)	-	42000	-
9.8(Gas Taps)	-	42000	-
9.9(Gas Taps)	-	42000	-
9.10(Gas Taps)	-	42000	-
12.1(Pan Supports)	-	42000	-
12.1.1(Pan Supports)	-	42000	-
12.1.2(Pan Supports)	-	42000	-
13.1(Gas Soundness)	-	42000	-
14.1(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.2(Gas Inlet Connection)	-	42000	-
14.3(Gas Inlet Connection)	-	42000	-
14.4(Gas Inlet Connection)	-	42000	-
14.4(Gas Inlet Connection)	-	42000	-
14.4(Gas Inlet Connection)	-	42000	-
14.4(Gas Inlet Connection)	-	42000	-
14.5(Gas Inlet Connection)	-	42000	-
14.5(Gas Inlet Connection)	-	42000	-
14.5(Gas Inlet Connection)	-	42000	-
15.0(Strength and Rigidity)	-	42000	-
15.0(Strength and Rigidity)	-	42000	-
15.0(Strength and Rigidity)	-	42000	-
15.0(Strength and Rigidity)	-	42000	-
17.0(Gas Consumption)	-	42000	-
17.0(Gas Consumption)	-	42000	-

13 May, 2028

-
Included w.e.f.23.06.2025

5546

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	300	25% Discount for BIS
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	300	25% Discount for BIS
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	25% Discount for BIS
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	25% Discount for BIS
13.7.2 (chem)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (chem)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.9 (elec)(Surface condition test)	-	0	-
13.10 (elec)(Ultimate breaking load)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (elec)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	750	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	750	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	750	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	750	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (elec)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
10 (elec)(Stranding)	-	0	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
4.1(Resistivity)	-	750	25% Discount for BIS
4.2(Density)	-	500	25% Discount for BIS
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	25% Discount for BIS
4.4(Coefficient of Linear Expansion)	-	500	25% Discount for BIS
5.1(Density)	-	500	25% Discount for BIS
5.2(Coefficient of Linear Expansion)	-	500	25% Discount for BIS
14.2(a), 8.2.1(Sizes)	-	300	25% Discount for BIS
7(FREEDOM FROM DEFECTS)	-	0	-
6.2(zinc Purity)	-	750	25% Discount for BIS
9(Joint in wires)	-	0	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	0	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	25% Discount for BIS
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	0	-
8.2.2(Calculated resistance)	-	750	25% Discount for BIS
Cl-9.2.5(Welded joint strength)	-	0	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
10(Stranding)	-	0	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.7(Galvanising test Dip test for uniformity of coating)	-	750	25% Discount for BIS
13.7(Weight of Zinc Coating [g/m²])	-	750	25% Discount for BIS
13.7(Weight of Zinc Coating [g/m²])	-	750	25% Discount for BIS
7.1(Freedom from Defects)	-	0	-
9(Joint in Wire)	-	0	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.7(Galvanising test Dip test for uniformity of coating)	-	750	25% Discount for BIS

01 May, 2028

-
Included w.e.f 18.08.2025 Exclusion: Cl 13.9 (elec) (Surface condition test), Cl 13.10 (elec) (Ultimate breaking load) , Cl 13.11 (elec) (Stress-strain test)

5547

Sleen India Biz venture Private Limited, Agra

9139736

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

All type

80500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	400	-
5.1(MANUFACTURE- IS 15907)	-	800	-
5.2.1(Lamination- IS 15907)	-	1200	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	200	-
5.2.1(Lamination- IS 15907)	-	0	-
5.2.2(Lamination- IS 15907)	-	0	-
5.2.2(Lamination- IS 15907)	-	0	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	600	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(The width of the hem - IS 15907)	-	300	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Finished width of pocket - IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.4(Bonding- IS 15907)	-	500	-
6- Table 1- SL.No (i)(Mass)	-	500	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	800	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	0	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	17950	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	950	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	17950	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	400	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	400	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1000	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	500	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1000	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	800	-
6.1(Length -IS 15907)	-	200	-
6.1(Width - IS 15907)	-	200	-
6.1(Height - IS 15907)	-	200	-
6.2(Water Proofness,IS 7941)	-	300	-
6.2(Water Proofness, IS 7940)	-	9240	-
4.1(Identification)	-	400	-
4.1(Linear Density)	-	400	-
4.1(Width)	-	200	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1200	-

-
Included w.e.f 10.07.2025

5548

Samridhi Test House Pvt. Ltd.

8184706

IS 2553 : Part 3 (2019)

Safety glass - Specification: Part 3 solar applications

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	4500	-
4.2 & 6(Dimensions)	-	4500	-
4.2 & 6(Squareness)	-	4500	-
4.2 & 6(Flatness)	-	4500	-
4.2 & 6(Fragmentation)	-	14000	-
4.2 & 6(Resistance to Shock (Ball Drop))	-	23500	-
4.2 & 6(Mechanical Strength)	-	14500	-
4.2 & 6(Hail Strength)	-	24000	Additional Charges for Hail Strength (Optional Requirement) Rs 24000. Complete testing charges Including optional requirement (Hail Strength) Rs 98000.
5.2(Marking)	-	2000	-
As per Clause 6, Table 5(Solar Glas)	-	2000	-

-
Included w.e.f 28.07.2025

5549

Samridhi Test House Pvt. Ltd.

8184706

IS 14900 (2018)

Transparent float glass - Specification (First Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(A glass shall be deemed to be manufactured using float glass technology if the tin side of the glass can be identified by the UV light test as prescribed in Annex A.)	-	3100	-
Cl.4.2 ( Annexure B Table 1)(The minimum value for visual light transmission for a flat, transparent clear float glass, when measured as per Annex B, shall be as prescribed in Table 1)	-	1800	-
Cl.4.3.1 (Table 2)(Float glass thickness shall be measured with micrometer or calipers, which is graduated to 0.01 mm or with a measuring instrument having an equivalent accuracy. The tolerances on thickness shall be as specified in Table 2.)	-	2000	-
Cl.4.3.2.1(the finished pane shall not be larger than a prescribed rectangle of dimensions (W + v, L + v), or smaller than a prescribed rectangle of dimensions (W – v, L – v), where v is the maximum tolerance on nominal dimensions. The corresponding sides of the prescribed rectangles shall be parallel to each other and these rectangles shall have a common centre (see Fig.1).)	-	1900	-
Cl.4.3.2.2(The length and width of the glass on cut sizes shall be measured with a steel scale (tape) which is graduated to 1 mm. The measurement shall be made on adjacent two sides. The tolerances on nominal dimensions length L, and width W, shall be ± 5mm.)	-	1900	-
Cl.4.3.3(The tolerances on diagonals shall be as specified in Table 3.)	-	1900	-
Cl.4.4 (Annex C Table 8)(The glass shall be viewed under the conditions of observation as described in Annex C, and the angle at which there is no optical distortion shall be noted. This angle shall not be less than the appropriate critical viewing angle (see Table 8).)	-	1900	-
Cl.4.5.1(see Table 4(Spot faults are categorized based on their size (see Table 4). Determination of spot faults shall be done in accordance with Annex D. The maximum permissible number of the different categories of spot faults shall be as per Tables 5 and 6.)	-	2900	-
Cl.4.5.2(Annexure E)(There shall be no reams, strings and lines distinguished visually when tested in accordance with Annex E.)	-	3400	-
Cl.4.5.3(Annexure E)(There shall not be any linear/extended faults when tested in accordance with Annex E.)	-	14000	-
Cl.4.6(Fig.2)(Defects in shape such as chipping of cut side, shelling, protrusion, slicing off, corners on/off, etc as shown in Fig. 2 shall be such that the deviation from the cutting line when viewing perpendicularly to the surface of plate glass is not more than the nominal value of thickness of glass or 10 mm, whichever is smaller.)	-	2700	-
Cl.4.7 (Annexure F)(Material may be tested for bloom freedom as per Annex F whenever required by the purchaser.)	-	0	Exclusion Cl. 4.7 Bloom Test (Optional Requirement)
4.3.1(Thickness)	-	2000	-
4.3.1(Thickness test)	-	2000	-
4.3.1(Thickness test)	-	2000	-
Cl 4.1(A glass shall be deemed to be manufactured using float glass technology if the tin side of the glass can be identified by the UV light test as prescribed in Annex A.)	-	0	-
Cl.4.2 ( Annexure B Table 1)(The minimum value for visual light transmission for a flat, transparent clear float glass, when measured as per Annex B, shall be as prescribed in Table 1)	-	0	-
Cl.4.3.1 (Table 2)(Float glass thickness shall be measured with micrometer or calipers, which is graduated to 0.01 mm or with a measuring instrument having an equivalent accuracy. The tolerances on thickness shall be as specified in Table 2.)	-	0	-
Cl.4.3.2.1(the finished pane shall not be larger than a prescribed rectangle of dimensions (W + v, L + v), or smaller than a prescribed rectangle of dimensions (W – v, L – v), where v is the maximum tolerance on nominal dimensions. The corresponding sides of the prescribed rectangles shall be parallel to each other and these rectangles shall have a common centre (see Fig.1).)	-	0	-
Cl.4.3.2.2(The length and width of the glass on cut sizes shall be measured with a steel scale (tape) which is graduated to 1 mm. The measurement shall be made on adjacent two sides. The tolerances on nominal dimensions length L, and width W, shall be ± 5mm.)	-	0	-
Cl.4.3.3(The tolerances on diagonals shall be as specified in Table 3.)	-	0	-
Cl.4.4 (Annex C Table 8)(The glass shall be viewed under the conditions of observation as described in Annex C, and the angle at which there is no optical distortion shall be noted. This angle shall not be less than the appropriate critical viewing angle (see Table 8).)	-	0	-
Cl.4.5.1(see Table 4(Spot faults are categorized based on their size (see Table 4). Determination of spot faults shall be done in accordance with Annex D. The maximum permissible number of the different categories of spot faults shall be as per Tables 5 and 6.)	-	0	-
Cl.4.5.2(Annexure E)(There shall be no reams, strings and lines distinguished visually when tested in accordance with Annex E.)	-	0	-
Cl.4.5.3(Annexure E)(There shall not be any linear/extended faults when tested in accordance with Annex E.)	-	0	-
Cl.4.6(Fig.2)(Defects in shape such as chipping of cut side, shelling, protrusion, slicing off, corners on/off, etc as shown in Fig. 2 shall be such that the deviation from the cutting line when viewing perpendicularly to the surface of plate glass is not more than the nominal value of thickness of glass or 10 mm, whichever is smaller.)	-	0	-
Cl.4.7 (Annexure F)(Material may be tested for bloom freedom as per Annex F whenever required by the purchaser.)	-	0	-
4.3.1(Thickness)	-	0	-
4.3.1(Thickness test)	-	0	-
4.3.1(Thickness test)	-	0	-

-
Included w.e.f.31.07.2025 Exclusion Cl.4.7 (Annexure F) (Material may be tested for bloom freedom as per Annex F whenever required by the purchaser.)

5550

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5082 (1998)

Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision)

Grade - 19501, 63401 & Temper Designation - 19501 M,H1,H2 , 63401 WP(Range 1) , 63401 WP(Range 1) ,63401 WP(Range 2) , 63401 WP(Range 2)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(CHEMICAL COMPOSITION Table 1)	-	1000	-
Clause 5(FREEDOM FROM DEFECTS)	-	500	-
8.1(MECHANICAL TEST Tensile Strength Min, Mpa)	-	1500	-
8.1(MECHANICAL TEST (0.2 Percent Proof Stress Min, Mpa))	-	1200	-
8.1(Percent Elongation on 5.65 Min)	-	1100	-
8.1(Electrical Conductivity at 20°C,Min)	-	1250	-
8.1(Maximum Electrical Resistivity at 20°C ohm-mm/mm2)	-	1250	-
8.2(Bend Test)	-	1400	-
Clause 10(DIMENSIONAL TOLERANCES)	-	500	-
6.1, Table 1(Aluminium)	-	1000	-
6.1, Table 1(Copper)	-	1000	-
6.1, Table 1(Magnesium)	-	1000	-
6.1, Table 1(Silicon)	-	1000	-
6.1, Table 1(Manganese)	-	1000	-
6.1, Table 1(Zinc)	-	1000	-
6.1, Table 1(Titanium)	-	1000	-
6.1, Table 1(Chromium)	-	1000	-
6.1, Table 1(Iron)	-	1000	-
6.1, Table 1(Vanadium)	-	1000	-

-
Included w.e.f 02.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number