BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5581

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

630000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General testing requirements)	-	15000	OK
5(Marking and documentation)	-	15000	OK
6(Environmental Requirements and conditions)	-	100000	OK
7(Protection against electric shock and energy hazards)	-	50000	OK
8(Protection Against mechanical Hazards)	-	50000	OK
9(Protection Against Fire Hazards)	-	100000	OK
11(Protection against liquid hazards)	-	100000	OK
10(Protection against Sonic Pressure hazards)	-	50000	OK
12(Chemical hazards)	-	0	OK
13(Physical requirements)	-	50000	OK
14(Components)	-	100000	OK

17 Feb, 2028

-
-

5582

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Heating)	-	2000	NIL
29(clearance, creepage distances and solid insulation)	-	2000	NIL
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	0	-
11.2(General)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	2000	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-

17 Feb, 2028

-
Exclusion 24 (Components) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

5583

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	OK
7.0(Marking and instructions)	-	0	OK
8.0(Protection against access to live part test)	-	4000	OK
9.0(Starting of motor-operated appliances test)	-	0	OK
10.0(Power Input and current test)	-	3000	OK
11.0(Heating test)	-	3000	OK
13.0(Leakage current and electric strength test)	-	2000	OK
14.0(Transient voltages)	-	0	OK
15.0(Moisture Resistance)	-	2000	OK
16.0(Leakage current and electric strength test)	-	2000	OK
17.0(Overload protection of transformers test)	-	0	OK
18.0(Endurance test)	-	0	OK
19.0(Abnormal Operations)	-	3000	OK
20.0(Stability and Mechanical Hazards)	-	1000	OK
21.0(Mechanical Strength)	-	0	OK
22.0(Construction verification related tests)	-	0	OK
23.0(Internal wiring)	-	0	OK
24.0(Components)	-	0	OK
25.0(Supply connections and External Flexible Cords)	-	0	OK
26.0(Terminal for External Conductors)	-	0	OK
27.0(Provision for Earthing)	-	1000	OK
28.0(Screws and connections)	-	0	OK
29.0(Clearances and Creepage distances and solid insulation)	-	1000	OK
30.0(Resistance to heat and fire)	-	1000	OK
31.0(Resistance to rusting)	-	0	OK
32.0(Radiation, Toxicity and Similar hazards)	-	0	OK

17 Feb, 2028

-
Exclusion: Cl 24.0 (Components)

5584

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	OK
7(Marking and instructions)	-	0	OK
8(Protection against live parts)	-	1500	OK
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	OK
10(POWER INPUT AND CURRENT)	-	2000	OK
11(HEATING)	-	2000	OK
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	OK
14(TRANSIENT OVERVOLTAGES)	-	0	OK
15(MOISTURE RESISTANCE)	-	2000	OK
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	OK
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	OK
18(ENDURANCE)	-	0	OK
19(ABNORMAL OPERATION)	-	2000	OK
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	OK
21(MECHANICAL STRENGTH)	-	2000	OK
22(CONSTRUCTION)	-	0	OK
23(INTERNAL WIRING)	-	0	OK
24(COMPONENTS)	-	0	OK
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	OK
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	OK
27(PROVISION FOR EARTHING)	-	1000	OK
28(SCREWS AND CONNECTIONS)	-	0	OK
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	OK
30(RESISTANCE TO HEAT AND FIRE)	-	1000	OK
31(RESISTANCE TO RUSTING)	-	0	OK
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	OK

17 Feb, 2028

-
Exclusion: Cl 24 (COMPONENTS)

5585

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

99000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2500	-
1.6(Power interface .)	-	2500	-
1.7(Markings and instructions)	-	2500	-
2.1(Protection from electric shock and energy hazards)	-	2500	-
2.2(SELV circuits)	-	2500	-
2.3(TNV circuits)	-	2500	-
2.4(Limited current circuits)	-	2500	-
2.5(Limited power sources .)	-	2500	-
2.6(Provisions for earthing and bonding)	-	2500	-
2.8(Safety interlocks)	-	2500	-
2.9(Electrical insulation)	-	2500	-
2.10(Clearances, creepage distances and distances through insulation)	-	2500	-
3.1(General)	-	2500	-
3.2(Connection to a mains supply)	-	2500	-
3.3(Wiring terminals for connection of external conductors)	-	2500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	-
3.4(Disconnection from the mains supply)	-	2500	-
3.5(Interconnection of equipment)	-	2500	-
4.1(Stability)	-	2500	-
4.2(Mechanical strength)	-	2500	-
4.3(Design and construction)	-	2500	-
4.4(Protection against hazardous moving parts)	-	2500	-
4.5(Thermal requirements)	-	2500	-
4.6(Openings in enclosures)	-	2500	-
4.7(Resistance to fire)	-	2500	-
5.1(Touch current and protective conductor curren)	-	2500	-
5.3(Abnormal operating and fault conditions)	-	2500	-
5.2(Electric strength)	-	2500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2500	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2500	-
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	-
7.1(General)	-	6000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	6000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	6000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	6000	-

17 Feb, 2028

-
-

5586

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	4000	-
8(Protection against accidental contact with live parts)	-	4000	-
9(Terminals)	-	0	-
10(PROVISION FOR EARTHING)	-	4000	-
11(MOISTURE RESISTANCE)	-	4000	-
12(Electric Strength)	-	4000	-
13(Thermal endurance test for winding of ballasts)	-	4000	-
14(Fault conditions)	-	4000	-
15(Transformer heating)	-	4000	-
16(Construction)	-	4000	-
17(Creepage distance and clearances)	-	4000	-
18(Screws, current carrying parts and connections)	-	4000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	4000	-

17 Feb, 2028

-
-

5587

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Protection against live parts)	-	4500	Nil
6.0(Classification)	-	4500	OK
7(Marking and instructions)	-	4500	OK
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	4500	OK
10(POWER INPUT AND CURRENT)	-	12500	OK
11(HEATING)	-	4500	OK
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	4500	OK
14(IMPULSE VOLTAGE TEST)	-	4500	OK
15(HUMIDITY TREATMENT TEST)	-	4500	OK
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	4500	OK
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	4500	OK
24(COMPONENTS)	-	4500	OK
18(ENDURANCE)	-	4500	OK
19(ABNORMAL OPERATION)	-	4500	OK
20(STABILITY AND MECHANICAL HAZARDS)	-	4500	OK
21(MECHANICAL STRENGTH)	-	4500	OK
23(INTERNAL WIRING)	-	4500	OK
22(CONSTRUCTION)	-	4500	OK
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	4500	OK
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	4500	OK
27(PROVISION FOR EARTHING)	-	4500	OK
28(SCREWS AND CONNECTIONS)	-	4500	OK
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4500	OK
30(RESISTANCE TO HEAT AND FIRE)	-	4500	OK
31(RESISTANCE TO RUSTING)	-	4500	OK
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	4500	OK

17 Feb, 2028

-
Exclusion: Cl 24 (Components)

5588

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	4000	NIL
7(Marking and instructions)	-	4000	NIL
8(Protection against live parts)	-	4000	NIL
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	4000	NIL
10(POWER INPUT AND CURRENT)	-	17000	NIL
11(HEATING)	-	4000	NIL
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	4000	NIL
14(TRANSIENT OVERVOLTAGES)	-	4000	NIL
15(MOISTURE RESISTANCE)	-	4000	NIL
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	4000	NIL
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	4000	NIL
18(ENDURANCE)	-	4000	NIL
19(ABNORMAL OPERATION)	-	4000	NIL
20(STABILITY AND MECHANICAL HAZARDS)	-	4000	NIL
21(MECHANICAL STRENGTH)	-	4000	NIL
22(CONSTRUCTION)	-	4000	NIL
23(INTERNAL WIRING)	-	4000	NIL
24(COMPONENTS)	-	4000	NIL
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	4000	NIL
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	4000	NIL
27(PROVISION FOR EARTHING)	-	4000	NIL
28(SCREWS AND CONNECTIONS)	-	4000	NIL
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4000	NIL
30(RESISTANCE TO HEAT AND FIRE)	-	4000	NIL
31(RESISTANCE TO RUSTING)	-	0	NIL
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	NIL

17 Feb, 2028

-
Exclusion: Cl 24 (Components)

5589

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

102000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	4250	-
4.6(Power interface)	-	4250	-
4.7(Marking & instructions)	-	4250	-
5.1(Protection against shock and energy hazards)	-	4250	-
5.2(Requirement of auxiliary circuits)	-	4250	-
5.3(Protective earthing and bonding)	-	4250	-
5.4(AC and DC power isolation)	-	4250	-
5.5(Over current and earth fault condition)	-	4250	-
5.6(Safety interlocks)	-	4250	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4250	-
6.1(Wiring, connections and supply)	-	4250	-
6.2(Connection to power)	-	4250	-
6.3(Wiring terminals for external power conductors)	-	4250	-
7.1(Enclosure)	-	4250	-
7.2(STABILITY)	-	4250	-
7.3(MECHANICAL STRENGTH)	-	4250	-
7.4(Construction details)	-	4250	-
7.5(Resistance to fire)	-	4250	-
7.6(Battery location)	-	4250	-
7.7(Temperature rise)	-	4250	-
8.1(General procision for earth leakage)	-	4250	-
8.2(Electric Strength)	-	4250	-
8.3(Abnormal operating and fault conditions)	-	4250	-
9.0(Connection to telecommunication networks)	-	4250	-

17 Feb, 2028

-
-

5590

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	20000	NIL
5(Marking and documentation)	-	20000	NIL
6(Environmental requirements and conditions)	-	20000	NIL
7(Protection against electric shock and energy hazards)	-	20000	NIL
8(Protection against Mechanical Hazards)	-	20000	NIL
9(Protection against Fire Hazards)	-	20000	NIL
10(Protection against Sonic Pressure Hazards)	-	20000	NIL
11(Protection against Liquid Hazards)	-	20000	NIL
12(Protection against Chemical Hazards)	-	20000	NIL
13(Physical Requirements)	-	20000	NIL
14(Components)	-	20000	NIL

17 Feb, 2028

-
-

5591

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

79000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	-
7(Heating under normal operating conditions)	-	13000	-
8(Constructional requirements with regard to the protection against electric shock)	-	5000	-
9(Electric shock hazard under normal operating conditions)	-	7000	-
10(Insulation requirements)	-	5000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	-
14(Components)	-	6000	-
15(TERMINALS)	-	5000	-
16(External flexible cords)	-	6000	-
17(Electrical connections and mechanical fixings)	-	4000	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	-
19(Stability and mechanical hazards)	-	4000	-
20(Resistance to fire)	-	0	-

17 Feb, 2028

-
-

5592

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

88000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5.2(Insulation and Wiring)	-	1000	-
5.1(General)	-	0	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	2000	-
7.2(Intended Use)	-	35000	-
7.3(Reasonably foreseeable misuse)	-	48000	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

17 Feb, 2028

-
-

5593

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 16046 : Part 2 (2018)

93000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	5000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Type Test and Sample Size)	-	0	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	25000	-
7.3(Reasonably foreseeable misuse)	-	53000	-
8(Information for safety)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-
8.1(General)	-	0	-

17 Feb, 2028

-
Exclusion : Clause 7.3.1 of IS 16047: Part 3

5594

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

7500 View breakup
-

Clause No.	Exclusion	Remark
13(Marking)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
4(Nominal Size)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
5(Classes of Water meter)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	-
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
13(Marking)	-	-
4(Nominal Size)	-	-
5(Classes of Water meter)	-	-
7(Construction)	-	-
7.2(i) Body)	-	-
7.3(Registration Box)	-	-
7.4(Cap)	-	-
7.5(Connections )	-	-
7.6(Strainers)	-	-
7.7(Impeller and pistons)	-	For Complete Mechanical Test: 7500 & For Life Cycle Test:-20000 upto 25 mm, Above 25 mm:35000
7.8(Impeller, Chamber and Measuring Chamber )	-	-
7.9(Gears & Pinions )	-	-
7.1(Bearings)	-	-
7.11(Counter)	-	-
7.12(Dial)	-	-
7.13(Regulator)	-	-
7.14(Sealing)	-	-
7.15(Frost protection device)	-	-
8.1 & 8.2(Indicating device)	-	-
8.3(Value of verification Scale division )	-	-
8.4(Acceleration Device)	-	-
9.1, table 2(i)Threads )	-	-
9.1, table 4( ‘b’ )	-	-
9.1, table 5(iii) Overall Length (with nipple))	-	-
9.1, table 6(iv)Overall Width )	-	-
9.1, table 7(v)Overall Height H1)	-	-
9.1, table 8( H2 )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.3(Construction)	-	-
12.4.4(Life test )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
11.2(Min. Starting flow)	-	-
10.3(Temp. suitability )	-	-
10.1(Pressure tightness)	-	-
10.2(Loss of pressure)	-	-
11.1(Metering Accuracy)	-	-
12.4.2(Construction)	-	-
9.1, table 3(ii)Thread Length ‘a’ )	-	-
Cl-6.1.1 (b)(Elongation)	-	-
Cl-6.1.1 (c)(Water absorption on immersion)	-	-
Cl-6.1.1 (d)(withstanding temperature)	-	-

22 May, 2029

-
-

5595

BIS, Guwahati Branch Laboratory (GBL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3 (Treatment)	-
Cl-5.4 (Moisture Content)	-
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (i) b ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-4.1 (Timber)	-
Cl-4.2 (Adhesive)	-
Cl-5.1 (Veneers)	-
Cl-5.2.1 (Glueing)	-
Cl -5.2.2 (Thickness of Veneers)	-
Cl - 5.2.3.1 (Joint in Veneers)	-
Cl - 5.2.3.2 (Edge joints)	-
Cl - 5.2.3.3 (End joints)	-
Cl - 5.2.3.4 (Scarf joints)	-
Cl - 5.2.4 (Grain Direction)	-
5.1.1 (Defects in veneers)	-
Cl-9.12 (Steady-State Formaldehyde Emission Test)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength –Minimum Individual)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength –Minimum Individual)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength –Minimum Individual)	-
Cl-9.7 (Glue Adhesion in Mycological test - Glue Shear Strength -Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (ii) a ((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (ii) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-6.1 (Dimensions (width))	-
Cl-8.3 (Edge Straightness)	-
Cl-11.1 (Marking)	-
Cl-11.3 (Marking)	-
Cl. 9.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Rupture: Along the Face Grain: Average) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Minimum Individual) Wet Bending)	-
Cl. 9.9 (Table 3) ((Modulus of Elasticity: Along the Face Grain: Average) Wet Bending)	-

-
i) Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm

5596

BIS, Guwahati Branch Laboratory (GBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

- View breakup
Electricity Cost (per kWh) ₹ 9.00 Testing Charges per man hour ₹ 300.00 Total testing charge for BWP Grade ₹ 7,456.00 ₹ 7,450.00 Total testing charge for BWR Grade ₹ 7,108.00 ₹ 7,100.00 Total testing charge for MR Grade ₹ 7,090.00 ₹ 7,100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.7 (Steady-State Formaldehyde Emission Test)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.5.1 (Type based on classification by appearance)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl.8.1 (Dimensions -width)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-13 (Marking)	-

-
i)Except Steady-State Formaldehyde Emission Test (Optional Test). ii) Test facility available for thickness upto 25 mm

5597

Accurate Universal Laboratoies Private Limited, Ahmedabad

7174006

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-
Cl no.4.1(General)	-	14000	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	14000	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	14000	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	14000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	14000	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	14000	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	14000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	14000	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	14000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	14000	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	14000	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	14000	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	14000	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	14000	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	14000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	14000	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	14000	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	14000	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	14000	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	14000	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	14000	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	14000	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	14000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	14000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	14000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	14000	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	14000	-
4.1(General)	-	14000	-
Cl no.4.2(Ingredients)	-	14000	-
Cl no.5(Packing and marking)	-	14000	-
Cl-4.2.4(Aflatoxin B1)	-	14000	-

19 Sep, 2029

-
Included w.e.f.23.06.2025 Exclusion Cl-4.2.1 (Ingredients) Cl-4.2.3 (Material)

5598

Precision Laboratories LLP, Ahmedabad

7174106

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	6000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	6000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	6000	-
9.2.3(Adhesion of Plies - Annexure H)	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	6000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	6000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	6000	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	6000	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	6000	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	6000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	6000	-
cl. 11(marking)	-	6000	-
cl. 11.1(marking - BIS certification marking)	-	6000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	6000	-
6.2(Core- Moisture & Width)	-	6000	-
6.3(Cross Bands and Faces- Moisture content)	-	6000	-
6.3.1(Thickness of cross band and face veneers)	-	6000	-

31 Oct, 2026

-
Included w.e.f 01.04.2025

5599

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

45100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	0	Physical Testing: 22000 Chemical Testing:23100 Total:45100
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	400	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	200	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	200	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	600	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	200	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	400	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	600	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	200	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	400	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	400	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	600	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	200	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	600	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	2000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	400	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	200	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	200	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	200	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	200	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	400	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	400	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	400	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	400	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	600	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	600	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	200	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	400	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	400	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	200	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	200	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	200	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	200	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	200	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	400	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	400	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	400	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	200	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	400	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	400	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	400	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	200	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	200	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	2100	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	FOR CHEMICAL 23100
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-
Cl-5.1(Shape and Design)	-	0	-
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	0	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	0	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	0	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	0	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	0	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	0	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	0	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	0	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	0	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	0	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	0	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	0	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	0	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	0	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	0	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	0	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	0	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	0	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	0	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	0	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	0	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	0	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	0	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	0	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	0	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	0	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	0	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	0	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	0	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	0	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	0	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	0	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	0	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	0	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	0	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	0	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	0	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	0	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	0	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-

02 May, 2027

-
Included w.e.f 13.05.2025

5600

Intertek India Private Limited, New Delhi (E-26)

8136626

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	15% discount offered to samples received from BIS.
7.0(Marking and instructions)	-	1000	15% discount offered to samples received from BIS.
8.0(Protection against access to live part test)	-	2000	15% discount offered to samples received from BIS.
9.0(Starting of motor-operated appliances test)	-	0	This Clause is not Applicable.
10.0(Power Input and current test)	-	1000	15% discount offered to samples received from BIS.
11.0(Heating test)	-	3000	15% discount offered to samples received from BIS.
13.0(Leakage current and electric strength test)	-	4000	15% discount offered to samples received from BIS.
14.0(Transient voltages)	-	4000	15% discount offered to samples received from BIS.
15.0(Moisture Resistance)	-	3000	15% discount offered to samples received from BIS.
16.0(Leakage current and electric strength test)	-	5000	15% discount offered to samples received from BIS.
17.0(Overload protection of transformers test)	-	2000	15% discount offered to samples received from BIS.
18.0(Endurance test)	-	0	This Clause is not Applicable.
19.0(Abnormal Operations)	-	2000	15% discount offered to samples received from BIS.
20.0(Stability and Mechanical Hazards)	-	3000	15% discount offered to samples received from BIS.
21.0(Mechanical Strength)	-	2000	15% discount offered to samples received from BIS.
22.0(Construction verification related tests)	-	2000	15% discount offered to samples received from BIS.
23.0(Internal wiring)	-	2000	15% discount offered to samples received from BIS.
24.0(Components)	-	2000	15% discount offered to samples received from BIS.
25.0(Supply connections and External Flexible Cords)	-	1000	15% discount offered to samples received from BIS.
26.0(Terminal for External Conductors)	-	1000	15% discount offered to samples received from BIS.
27.0(Provision for Earthing)	-	1000	15% discount offered to samples received from BIS.
28.0(Screws and connections)	-	1000	15% discount offered to samples received from BIS.
29.0(Clearances and Creepage distances and solid insulation)	-	1000	15% discount offered to samples received from BIS.
30.0(Resistance to heat and fire)	-	3000	15% discount offered to samples received from BIS.
31.0(Resistance to rusting)	-	2000	15% discount offered to samples received from BIS.
4(General Requirements)	-	500	15% discount offered to samples received from BIS.
5(General condition for the tests)	-	500	15% discount offered to samples received from BIS.
6.0(Classification)	-	0	Repeated clause
7.0(Marking and instructions)	-	0	Repeated clause
8.0(Protection against access to live part test)	-	0	Repeated clause
9.0(Starting of motor-operated appliances test)	-	0	This clause is not applicable.
10.0(Power Input and current test)	-	0	Repeated clause
11.0(Heating test)	-	0	Repeated clause
13.0(Leakage current and electric strength test)	-	0	Repeated clause
14.0(Transient voltages)	-	0	Repeated clause
15.0(Moisture Resistance)	-	0	Repeated clause
16.0(Leakage current and electric strength test)	-	0	Repeated clause
17.0(Overload protection of transformers test)	-	0	Repeated clause
18.0(Endurance test)	-	0	This clause is not applicable.
19.0(Abnormal Operations)	-	0	Repeated clause
20.0(Stability and Mechanical Hazards)	-	0	Repeated clause
21.0(Mechanical Strength)	-	0	Repeated clause
22.0(Construction verification related tests)	-	0	Repeated clause
23.0(Internal wiring)	-	0	Repeated clause
24.0(Components)	-	0	Repeated clause
25.0(Supply connections and External Flexible Cords)	-	0	Repeated clause
26.0(Terminal for External Conductors)	-	0	Repeated clause
27.0(Provision for Earthing)	-	0	Repeated clause
28.0(Screws and connections)	-	0	Repeated clause
29.0(Clearances and Creepage distances and solid insulation)	-	0	Repeated clause
30.0(Resistance to heat and fire)	-	0	Repeated clause
31.0(Resistance to rusting)	-	0	Repeated clause
4(General Requirements)	-	0	Repeated clause
5(General condition for the tests)	-	0	Repeated clause

27 Apr, 2029

-
Included w.e.f.09.04.2025 Exclusion Cl 32.0 (Radiation, Toxicity and Similar hazards) Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

5601

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	10000	-
Cl 7(Dimensions Of Pipes)	-	10000	-
Cl 8(Visual Appearance)	-	10000	-
Cl 9.1(Hydraulic Characteristics)	-	10000	-
Cl 9.2(Fusion Compatibility)	-	10000	-
Cl 9.3(Reversion Test )	-	10000	-
Cl 9.4 & Annex B(Impact Strength)	-	10000	-
Cl 9.5(Density)	-	10000	-
Cl 9.6(Melt Flow Rate)	-	10000	-
Cl 9.7(Carbon Black Content & Dispersion)	-	10000	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	10000	-
Cl 9.9(Opacity)	-	10000	-
5(Colour)	-	10000	-

08 May, 2028

-
-

5602

ATCC TEST LABS LLP

8172626

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	200	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	300	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	500	-
6.5.3(Annexure N and by inspection)	-	500	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	200	-
6.18(Annexure H)	-	300	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	500	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	200	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	500	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	300	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	300	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	300	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	500	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	200	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	300	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	200	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	300	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	300	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	300	-
11.3.8(by inspection)	-	0	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	200	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	500	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	200	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	300	-
11.7.1.2.2(By Flexing test as per fig 9)	-	500	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	500	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	500	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	1000	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	500	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	500	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	500	-
12.1(As per IEC 60529)	-	500	-
12.1.6.2(Torque test)	-	500	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	500	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	500	-
12.3(as per cl 12.3.1 to 12.3.7)	-	500	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	500	-
14.1(As per table 14.1)	-	500	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	500	-
15.5(as per cl 15.5 to 15.6)	-	500	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	500	-
15.7(as per annexure J, cl 15.7)	-	500	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	500	-
16.2.4(test of cl 15 repeated )	-	500	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	500	-
17.9(as per cl 17.9.1 to 17.9.4)	-	500	-
17.1(as per cl 17.10.1 to 17.10.4)	-	500	-
17.11(as per cl 17.11.1 to 17.11.4)	-	500	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	500	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	500	-
J 17.18.5(as per cl J 17.8.5)	-	500	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	500	-
J 17.17(As per table 13.2)	-	500	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	500	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	500	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	500	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	0	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	-
18.2(Impact tester)	-	500	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	-
18.7(Pull test as per table 18.7)	-	500	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	0	-
19.2.6(By inspection)	-	0	-
20.1(as per table 20.2)	-	500	-
20.2.1(as per table 20.3)	-	500	-
20.2.2(as per table 20.4)	-	500	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	500	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	500	-
24.1(as per IEC 60742)	-	500	-
24.1(as per IEC 60384-14)	-	500	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	500	-
27.1(as per annexure H)	-	500	-
27.2(as per cl 27.2.1 and 27.2.2)	-	500	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	500	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	500	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	500	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	500	-
11.4.101(as per cl 11.4.101)	-	500	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	500	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	500	-
12.101.5(as per 12.103 to 12.105)	-	500	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	500	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	500	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	500	-
17.16.107( 250 thermal cycles.)	-	500	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	500	-
17.101.1(as per cl 17.101.1 to 17.105)	-	500	-
18.101(as per cl 18.101.2 and 101.3)	-	500	-
18.102(Hydrualic test)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	500	-
11(Constructional Requirements)	-	500	-
12(Moisture and Dust Resistance)	-	2500	-
13(Electric Strength and Insulation Resistance)	-	500	-
14(Heating)	-	500	-
15(Manufacturing Deviation and Drift)	-	500	-
16(Environmental Stress)	-	500	-
17(Endurance)	-	4400	-
18(Mechanical Strength)	-	500	-
19(Threaded Parts and Connections)	-	500	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	500	-
21(Fire Hazard Testing)	-	500	-
22(Resistance to Corrosion)	-	500	-
25(Normal Operation)	-	500	-
24(Components)	-	500	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	500	-
5(By inspection)	-	500	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	500	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	0	-
6.5.3(Annexure N and by inspection)	-	0	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	0	-
6.18(Annexure H)	-	0	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	0	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	0	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	0	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	0	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	0	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	0	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	0	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	0	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	0	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	0	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	500	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	200	-
11.3.8(by inspection)	-	500	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	0	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	0	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	0	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	0	-
11.7.1.2.2(By Flexing test as per fig 9)	-	0	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	0	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	0	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	0	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	0	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	0	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	0	-
12.1(As per IEC 60529)	-	0	-
12.1.6.2(Torque test)	-	0	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	0	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	0	-
12.3(as per cl 12.3.1 to 12.3.7)	-	0	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	0	-
14.1(As per table 14.1)	-	0	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	0	-
15.5(as per cl 15.5 to 15.6)	-	0	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	0	-
15.7(as per annexure J, cl 15.7)	-	0	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	0	-
16.2.4(test of cl 15 repeated )	-	0	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	0	-
17.9(as per cl 17.9.1 to 17.9.4)	-	0	-
17.1(as per cl 17.10.1 to 17.10.4)	-	0	-
17.11(as per cl 17.11.1 to 17.11.4)	-	0	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	0	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	0	-
J 17.18.5(as per cl J 17.8.5)	-	0	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	0	-
J 17.17(As per table 13.2)	-	0	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	0	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	0	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	0	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	500	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	0	-
18.2(Impact tester)	-	0	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	1000	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	0	-
18.7(Pull test as per table 18.7)	-	0	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	1000	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	500	-
19.2.6(By inspection)	-	500	-
20.1(as per table 20.2)	-	0	-
20.2.1(as per table 20.3)	-	0	-
20.2.2(as per table 20.4)	-	0	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	0	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	0	-
24.1(as per IEC 60742)	-	0	-
24.1(as per IEC 60384-14)	-	0	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	0	-
27.1(as per annexure H)	-	0	-
27.2(as per cl 27.2.1 and 27.2.2)	-	0	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	0	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	0	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	0	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	0	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	0	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	0	-
12.101.5(as per 12.103 to 12.105)	-	0	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	0	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	0	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	0	-
17.16.107( 250 thermal cycles.)	-	0	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	0	-
17.101.1(as per cl 17.101.1 to 17.105)	-	0	-
18.101(as per cl 18.101.2 and 101.3)	-	0	-
18.102(Hydrualic test)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	2000	-
11(Constructional Requirements)	-	2000	-
12(Moisture and Dust Resistance)	-	1000	-
13(Electric Strength and Insulation Resistance)	-	1000	-
14(Heating)	-	1000	-
15(Manufacturing Deviation and Drift)	-	1000	-
16(Environmental Stress)	-	1000	-
17(Endurance)	-	5000	-
18(Mechanical Strength)	-	1000	-
19(Threaded Parts and Connections)	-	1000	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	1000	-
21(Fire Hazard Testing)	-	1000	-
22(Resistance to Corrosion)	-	1000	-
25(Normal Operation)	-	1000	-
24(Components)	-	1000	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	2000	-

-
Included w.e.f.16.07.2025

5603

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 15 (2024)

Vitreous China Sanitary Appliances âSpecification Part 15 Specific Requirements of Universal Water Closets (Third Revision)

Size 1, Size 2 and any other sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	3000	-
Cl-4(SIZES)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	3000	-
Cl-6(CONSTRUCTION)	-	500	-
Cl-7(FINISH)	-	200	-
Cl-6.3(Two-Piece Bend)	-	500	-
Cl-8.1(Universal water)	-	1400	-
Cl-8.2(Toilet Paper Test)	-	200	-
Cl-8.3(Smudge Test)	-	200	-
Cl-8.4(Holding Capacity Test)	-	200	-
Cl-8.5.1(Single Ball Test)	-	200	-
Cl-8.5.2(Fifty Ball Test)	-	200	-
Cl-8.6(Fifty Ball Test)	-	200	-
Cl-8.7(Splash Test)	-	200	-
Cl-9(LOAD BEARING TEST)	-	1000	-
Cl-11("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	3000	-

-
Included w.e.f.03.04.2025

5604

QA TESTING LABORATORIES PRIVATE LIMITED LUCKNOW

9192006

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Compressive strength)	-	500	OK
6.1(Dimensions)	-	500	-
7.3(Efflorescence)	-	500	-
7.2(Water Absorption)	-	500	-
4.1(Common burnt clay bricks)	-	200	-
6.2(Tolerances)	-	200	-
5(General Quality)	-	200	-
9(Marking)	-	200	-

-
-

5605

QA TESTING LABORATORIES PRIVATE LIMITED LUCKNOW

9192006

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	200	-
Clause 7.3, Annex G(Average Breaking Load)	-	200	-
Clause 7.3, Annex G(Individual Breaking Load)	-	200	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	200	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	200	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	200	-
Clause 7.1.1 (General Quality)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	200	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	200	-

-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi) (Freeze Thaw durability, Clause 6.3 (Bonding and Delamination between the layers of paver blocks), Clause 3.20 (Spacer nibs), 10 (Marking), 5.2 (Mineral Admixture), 5.3 (Chemical Admixtures), 5.4 (Coarse and Fine Aggregates), 5.5 (Pigments), 5.6 (Water), cl.5 (Cement)

5606

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 2266 (2024)

STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision)

19900 View breakup
-

Clause No.	Exclusion	Remark
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6(Wire rope)	-	-
Cl-7(Construction)	-	-
Cl-8.1(Fibre Core)	-	-
Cl-8.2(Steel Core)	-	-
Cl-9(Joints)	-	-
Cl-10(Galvanizing)	-	-
Cl-12(Marking)	-	-
Cl-4(Rope size and Tolerance)	-	-

25 Feb, 2027

-
Included w.e.f 09.04.2025

5607

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED. BENGALURU

6175936

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.4(Length validation)	-	51250	-
Cl-3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-

10 Jan, 2027

-
Included w.e.f.03.06.2025 Exclusion Cl-5.6 (Sprocket rim profiles) Cl-5.9 (Pitch accuracy of sprocket teeth) Cl-5.11 (Bore tolerance)

5608

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 4521 (2024)

Wire Ropes Used in Oil Wells and Oil Well Drilling and Other Applications of Petroleum and Natural Gas Industries - Specification (Third Revision)

19900 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-
Cl-4(Size, Construction, Core and Grades)	-	-
Cl-5(Minimum breaking force)	-	-
Cl-6.1(Wire for guy strands)	-	-
Cl-6.2(Core)	-	-
Cl-6.3(Joints)	-	-
Cl-6.4(Mass)	-	-
Cl-6.5(Lay of the Rope)	-	-
Cl-6.6(Length of Lay)	-	-
Cl-7(Galvanizing)	-	-
Cl-8(Lubrication)	-	-
Cl-9(Rope grades)	-	-
Cl-10(wire tensile strength grade)	-	-
Cl-11(Tolerance in rope diameter)	-	-
Cl-12(Marking)	-	-

25 Feb, 2027

-
Included w.e.f 09.04.2025

5609

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17786 (2022)

Medical Textiles Underpad Specification

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1(Type and Sizes)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(pH Value)	-	250	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	500	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	500	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	3600	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	500	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-
Clause 5, Table 1(Type and Sizes)	-	0	-
Clause 6(WORKMANSHIP AND FINISH)	-	0	-
Clause 8.1(pH Value)	-	0	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	0	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	0	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	0	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	0	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	0	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-

20 Feb, 2028

-
-

5610

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	500	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	200	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	300	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	200	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	250	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	-
9(MARKING)	-	0	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	-

20 Feb, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number