| 5551 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 13893 (1994) |
Polyurethane soles semirigid - specification |
- |
6000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3.2(Ageing test) |
- |
2700 |
|
- |
| 4.3(Ross Flex test) |
- |
2000 |
|
- |
| 4.3(Flexural strength ) |
- |
2000 |
|
- |
| 4.3(Abrasion Resistance) |
- |
1080 |
|
- |
| 4.3(Elongation at break) |
- |
500 |
|
- |
| 4.3(Tensile Strength ) |
- |
500 |
|
- |
| 4.3(Hardness Shore(A)) |
- |
300 |
|
- |
| 4.3(Relative density ) |
- |
300 |
|
- |
| 4.2(Thickness ) |
- |
180 |
|
- |
| 4.1(Design) |
- |
150 |
|
- |
| Cl.5, 5.1, 5.2(Packing And Marking) |
- |
180 |
|
- |
| 4.2 (Amendment 2)(Thickness) |
- |
100 |
|
- |
| 4.3.1 Table 1 i) (Amendment 2)(Relative Density) |
- |
300 |
|
- |
| 4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N) |
- |
1080 |
|
- |
| 4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method) |
- |
1080 |
|
- |
| 4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes) |
- |
2700 |
|
- |
| 4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength) |
- |
250 |
|
- |
| 4.3.1 Table 1 vii) (Amendment 2)(Elongation at break) |
- |
250 |
|
- |
| 4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force)) |
- |
500 |
|
- |
| 4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A) |
- |
600 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5552 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 5676 (1995) |
Moulded solid rubber soles and heels - SpecificatlOn (Second Revision) |
- |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5/5.1(REQUIREMENTS-General) |
- |
100 |
|
- |
| 5/5.5- Table1(REQUIREMENTS-Thickness) |
- |
180 |
|
- |
| 6(Marking and packing) |
- |
180 |
|
- |
| 5/5.7- Table2(REQUIREMENTS- Physical Requirements-
as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16)) |
- |
4000 |
|
- |
| Cl.6.1,6.2,6.3(Marking and packing) |
- |
180 |
|
- |
| 5/5.2- Fig. 1 to 5(REQUIREMENTS-Design) |
- |
100 |
|
- |
| 5/5.3/5.3.1(REQUIREMENTS- Construction) |
- |
150 |
|
- |
| 5/5.6/5.6.1(REQUIREMENTS-Channel) |
- |
100 |
|
- |
| 8.3(Measurement of thickness) |
- |
180 |
|
- |
| 5.5 (Amendment 1)(Thickness) |
- |
180 |
|
- |
| 5.7 Table 2 i) (Amendment 1)(Relative Density) |
- |
300 |
|
- |
| 5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A) |
- |
600 |
|
- |
| 5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N) |
- |
1080 |
|
- |
| 5.7, Table 2 v) (Amendment 1)(Tensile strength) |
- |
250 |
|
- |
| 5.7, Table 2 vi) (Amendment 1)(Elongation at break) |
- |
250 |
|
- |
| 5.7, Table 2 vii) (Amendment 1)(Tear strength (average force)) |
- |
500 |
|
- |
| 5.7, Table 2 iii) (Amendment 1)(Flexing resistance) |
- |
1080 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5553 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 374 (2019) |
Specification for electric ceiling type fans and regulators (Third Revision) |
Upto and including 250V supply for Household and simila |
26250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Classification (as per Cl.6 of IS 302-2-80 :2017)) |
- |
500 |
|
10% discount on BIS samples |
| 8.1(Marking (as per Cl. 7 of IS 302-2-80:2017)) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,a(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,b(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,c(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,d(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,e(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,f(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.1,g(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.2(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.3,a(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.3,b(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.3,c(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.3,d(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.3,e(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8.4(Marking ) |
- |
500 |
|
10% discount on BIS samples |
| 8(Marking (as per Cl. 7.1 of IS 302-2-80:2017)) |
- |
500 |
|
10% discount on BIS samples |
| 8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008)) |
- |
500 |
|
10% discount on BIS samples |
| 8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008)) |
- |
500 |
|
10% discount on BIS samples |
| 8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017)) |
- |
500 |
|
10% discount on BIS samples |
| 6.2(Rating) |
- |
500 |
|
10% discount on BIS samples |
| 9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9( Heating (as per Cl.11 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017)) |
- |
5000 |
|
10% discount on BIS samples |
| 9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) ) |
- |
5000 |
|
10% discount on BIS samples |
| 9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Construction (as per Cl.22.101 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Components (as per Cl.24.103 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Components (as per Cl.24.104 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017)) |
- |
1000 |
|
10% discount on BIS samples |
| 9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017)) |
- |
1000 |
|
10% discount on BIS samples |
| 9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017)) |
- |
2000 |
|
10% discount on BIS samples |
| 10.1(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.2(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.3(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.4(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.5(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.6(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.7(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 10.8(Speed Regulators) |
- |
2000 |
|
10% discount on BIS samples |
| 11.1(Starting) |
- |
2000 |
|
10% discount on BIS samples |
| 11.2(Starting) |
- |
2000 |
|
10% discount on BIS samples |
| 12(Interchangeability) |
- |
2000 |
|
10% discount on BIS samples |
| 13(Silent Operation) |
- |
5000 |
|
10% discount on BIS samples |
| 14.3 & Table 1(Test for Air Performance) |
- |
5000 |
|
10% discount on BIS samples |
| 14.4(Measurement of Speed of the Fan ) |
- |
4000 |
|
10% discount on BIS samples |
| 14.5(Measurement of Power factor and Power Input) |
- |
4000 |
|
10% discount on BIS samples |
| 16(Endurance Test) |
- |
5000 |
|
10% discount on BIS samples |
| 17(Test for Harmonic Distortion) |
- |
4000 |
|
10% discount on BIS samples |
| 4(GENERAL REQUIREMENTS) |
- |
1000 |
|
- |
| 5(GENERAL NOTES ON TESTS) |
- |
1000 |
|
- |
| 15.1, 15.2(Air delivery and service value) |
- |
12000 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5554 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 17043 (2018) |
Derby shoes - Specification |
- |
54000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Innocuosness test IS 17011) |
- |
35000 |
|
Innocuosness test price: 35000;
without Innocuosness 19000 per sample
10% discount to BIS |
| 4.15.2(Breaking load & tag retention) |
- |
500 |
|
- |
| 4.15.1(Length of laces ) |
- |
100 |
|
- |
| 4.14(Eyelet pull out test) |
- |
100 |
|
- |
| 4.13.8(Flex resistance ) |
- |
1080 |
|
- |
| 4.13.7(Abrasion resistance ) |
- |
1080 |
|
- |
| 4.13.6(Tear Strength) |
- |
800 |
|
- |
| 4.13.5(Ageing test) |
- |
500 |
|
- |
| 4.13.4(Hardness (IRHD)) |
- |
2000 |
|
- |
| 4.13.3(Density ) |
- |
300 |
|
- |
| 4.13.2(Thickness ) |
- |
180 |
|
- |
| 4.13.1(Meterial) |
- |
180 |
|
- |
| 4.12(Breaking Strength of thread) |
- |
800 |
|
- |
| 4.11.2(Tear Strength) |
- |
500 |
|
- |
| 4.11.1(Thickness ) |
- |
180 |
|
- |
| 4.10(Toe Puff & counter stiffener thickness ) |
- |
180 |
|
- |
| 4.9.3(Abrasion resistance ) |
- |
800 |
|
- |
| 4.9.2(Water absorption & desorption ) |
- |
630 |
|
- |
| 4.9.1(Thickness ) |
- |
180 |
|
- |
| 4.8.3(Water absorption & desorption ) |
- |
630 |
|
- |
| 4.8.2(Abrasion ) |
- |
800 |
|
- |
| 4.8.1(Thickness ) |
- |
180 |
|
- |
| 4.7.4(Water vapour permeability & coefficent ) |
- |
630 |
|
- |
| 4.7.3(Abrasion resistance ) |
- |
800 |
|
- |
| 4.7.2(Tear Strength) |
- |
500 |
|
- |
| 4.7.1(Thickness ) |
- |
180 |
|
- |
| 4.6.4(Water penetration and water absorption) |
- |
630 |
|
- |
| 4.6.3(Water vapour permeability & coefficent ) |
- |
630 |
|
- |
| 4.6.2(Tear Strength) |
- |
500 |
|
- |
| 4.6.1(Thickness ) |
- |
180 |
|
- |
| 4.5.8(Energy absorption of seat region ) |
- |
630 |
|
- |
| 4.5.7(Cold insulation tester ) |
- |
900 |
|
- |
| 4.5.6(Heat insulation of sole complex) |
- |
900 |
|
- |
| 4.5.5.1(Electrical Properties Antistatic ) |
- |
3000 |
|
- |
| 4.5.4(Slip Resitance) |
- |
2500 |
|
- |
| 4.5.3.2(Interayer bond strength) |
- |
1080 |
|
- |
| 4.5.3.1(Upper/outsole bond strength) |
- |
1080 |
|
- |
| 4.5.2(Ergonomic Feature) |
- |
300 |
|
- |
| 4.5.1(Contruction) |
- |
100 |
|
- |
| 4.4(Height of upper ) |
- |
180 |
|
- |
| 4.3.2(Weight) |
- |
180 |
|
- |
| 4.3.1(Size) |
- |
180 |
|
- |
| 4.2(Design ) |
- |
180 |
|
- |
| 4.1(General) |
- |
180 |
|
- |
| 7(Marking) |
- |
150 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5555 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 16994 (2018) |
Footwear for Men and Women for Municipal Scavenging Work |
- |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.6(Leak Proof test) |
- |
900 |
|
. |
| 8.4(Volatility & lead content ) |
- |
800 |
|
. |
| 8.3(Compression Resistance) |
- |
630 |
|
. |
| 8.3(Impact resistance ) |
- |
630 |
|
. |
| 8.2(Internal Toe cap length) |
- |
180 |
|
. |
| 8.1(Height of upper ) |
- |
1080 |
|
. |
| 8.0(Construction) |
- |
180 |
|
. |
| 7.10(Ageing test) |
- |
2000 |
|
. |
| 7.9(Hydrolysis) |
- |
2700 |
|
. |
| 7.8(Insocks Material ) |
- |
100 |
|
. |
| 7.7.5(Upper / Outsole bond strength) |
- |
1080 |
|
. |
| 7.7.4(Interlayer Bond Strength ) |
- |
1080 |
|
. |
| 7.7.3(Flexing Resistance ) |
- |
1080 |
|
. |
| 7.7.2(Abrasion Resistance) |
- |
1080 |
|
. |
| 7.7.1(Tear Strength ) |
- |
500 |
|
. |
| 7.7(Hardness (IRHD)) |
- |
300 |
|
. |
| 7.7(Thickness) |
- |
180 |
|
. |
| 7.7(Density ) |
- |
300 |
|
. |
| 7.6(Peel Strength ) |
- |
1080 |
|
. |
| 7.6(Shape retention) |
- |
800 |
|
. |
| 7.6(Moisture ) |
- |
800 |
|
. |
| 7.6(Resilience test ) |
- |
800 |
|
. |
| 7.6(1st Dry collapsing load, hardness) |
- |
800 |
|
. |
| 7.5(Insocks ) |
- |
800 |
|
. |
| 7.5(Insoles ) |
- |
1350 |
|
. |
| 7.5(Water abrasion & desorption) |
- |
630 |
|
. |
| 7.5(Thickness ) |
- |
180 |
|
. |
| 7.4(Tensile Strength ) |
- |
500 |
|
. |
| 7.4(Abrasion Resistance) |
- |
1350 |
|
. |
| 7.4(Tear Strength ) |
- |
500 |
|
. |
| 7.3(Flexing Resistance ) |
- |
1500 |
|
. |
| 7.3(Tensile Strength ) |
- |
500 |
|
. |
| 7.3(Thickness ) |
- |
180 |
|
. |
| 7.3(Water Vapour permeability & coefficient ) |
- |
700 |
|
. |
| 7.3(Tear Strength ) |
- |
1080 |
|
. |
| 7.1(Compression Tester) |
- |
630 |
|
. |
| 7.1(Impact resistance) |
- |
630 |
|
. |
|
19 Jul, 2027 |
-
- |
| 5556 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 17037 (2018) |
Anti riot shoes - Specification |
- |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Innocuosness test IS 17011) |
- |
35000 |
|
WITHOUT INNOCOUSNESS 25000
10% DISCOUNT TO BIS |
| 4.16.2(Breaking load & lag retention) |
- |
1080 |
|
- |
| 4.16.1(Length of laces ) |
- |
180 |
|
- |
| 4.15(D-ring and Hooks ) |
- |
180 |
|
- |
| 4.14.10(Resistance to fuel oil) |
- |
900 |
|
- |
| 4.14.9(Resistance to hot contact) |
- |
800 |
|
- |
| 4.14.8(Flex resistance) |
- |
2000 |
|
- |
| 4.14.7(Abrasion resistance) |
- |
1080 |
|
- |
| 4.14.6(Tear Strength) |
- |
500 |
|
- |
| 4.14.5(Ageing test) |
- |
2000 |
|
- |
| 4.14.4(Hardness (IRHD)) |
- |
1500 |
|
- |
| 4.14.3(Density ) |
- |
180 |
|
- |
| 4.14.2(Thickness ) |
- |
180 |
|
- |
| 4.14.1(Meterial) |
- |
180 |
|
- |
| 4.13(Breaking Strength of thread) |
- |
180 |
|
- |
| 4.12.2(Tear Strength) |
- |
500 |
|
- |
| 4.12.1(Thickness ) |
- |
180 |
|
- |
| 4.11.2(Tear Strength) |
- |
500 |
|
- |
| 4.11.1(Thickness) |
- |
180 |
|
- |
| 4.10(Counter stiffener thickness) |
- |
100 |
|
- |
| 4.9.3(Water absorption & desorption ) |
- |
630 |
|
- |
| 4.9.2(Abrasion resistance ) |
- |
800 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5557 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 17012 (2018) |
High ankle tactical boots with pu - Rubber sole - Specification |
- |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Innocuousness Test IS 17011) |
- |
35000 |
|
WITH INNCOUSNESS TEST 60000, WITHOUT 25000 PER SAMPLE
10% DISCOUNT TO BIS |
| 4.16.2(Breaking Strength of lace ) |
- |
430 |
|
- |
| 4.16.1(Length of lace ) |
- |
180 |
|
- |
| 4.15(D-ring & Hooks ) |
- |
180 |
|
- |
| 6.1(Resistance to Fuel Oil) |
- |
1500 |
|
- |
| 4.14.9(Resistance to hot contact ) |
- |
1500 |
|
- |
| 4.14.8(Flexing resistance ) |
- |
900 |
|
- |
| 4.14.7(Ageing test) |
- |
2500 |
|
- |
| 4.14.6(Hardness (IRHD)) |
- |
1080 |
|
- |
| 4.14.5(Abrasion resistance ) |
- |
900 |
|
- |
| 4.14.4(Tear Strength) |
- |
630 |
|
- |
| 4.14.3(Sole Density ) |
- |
180 |
|
- |
| 4.14.2(Thickness) |
- |
180 |
|
- |
| 4.14.1(Material) |
- |
180 |
|
- |
| 4.13(Breaking Strength of thread ) |
- |
180 |
|
- |
| 4.12.2(Tear Strength) |
- |
630 |
|
- |
| 4.12.1(Thickness ) |
- |
180 |
|
- |
| 4.11.2(Tear Strength) |
- |
630 |
|
- |
| 4.11.1(Thickness ) |
- |
180 |
|
- |
| 4.10.3(Water absorption & desorption percent) |
- |
2500 |
|
- |
| 4.10.2(Abrasion resistance ) |
- |
630 |
|
- |
| 4.10.1(Material) |
- |
180 |
|
- |
| 4.9.3(Water absorption & desorption percent) |
- |
2500 |
|
- |
| 4.9.2(Abrasion resistance ) |
- |
630 |
|
- |
| 4.9.1(Thickness) |
- |
180 |
|
- |
| 4.8(Thickness Toe puff & counter stiffener) |
- |
180 |
|
- |
| 4.7.5(Water Vapour permeability & coefficient ) |
- |
1080 |
|
- |
| 4.7.4(Abrasion resistance ) |
- |
630 |
|
- |
| 4.7.3(Tear Strength) |
- |
900 |
|
- |
| 4.7.2(Material Counter & Tongue) |
- |
180 |
|
- |
| 4.7.1(Material vamp & Quarter) |
- |
180 |
|
- |
| 4.6.3(Water Penetration and water absorption ) |
- |
1080 |
|
- |
| 4.6.2(Tear Strength) |
- |
630 |
|
- |
| 4.6.1(Thickness ) |
- |
180 |
|
- |
| 4.5.8(Energy absorption of seat region ) |
- |
630 |
|
- |
| 4.5.7(Cold Insulation of sole complex) |
- |
900 |
|
- |
| 4.5.6(Heat Insulation of sole Complex) |
- |
900 |
|
- |
| 4.5.5(Antistatic test) |
- |
3000 |
|
- |
| 4.5.4(Slip Resitance) |
- |
2500 |
|
- |
| 4.5.3.2(Interayer bond strength) |
- |
1080 |
|
- |
| 4.5.3.1(Upper/outsole bond strength) |
- |
1080 |
|
- |
| 4.5.2(Ergonomic Feature) |
- |
300 |
|
- |
| 4.5.1(Construction) |
- |
180 |
|
- |
| 4.4(Height of upper ) |
- |
180 |
|
- |
| 4.3.2(Weight) |
- |
180 |
|
- |
| 4.3.1(Size) |
- |
180 |
|
- |
| 4.2(Design ) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5558 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 15644 (2006) |
Safety of electric toys |
- |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(Marking and instructions) |
- |
1000 |
|
- |
| 8.0(Power Input) |
- |
3000 |
|
- |
| 9.0(Heating and abnormal operation) |
- |
3000 |
|
- |
| 10.0(Electrical strength at operating temperature) |
- |
2000 |
|
- |
| 11.1(Moisture resistance) |
- |
2500 |
|
- |
| 11.2(Resistant to humidity) |
- |
2500 |
|
- |
| 12.0(Electric strength at room temperature) |
- |
2000 |
|
- |
| 13.0(Mechanical strength) |
- |
1000 |
|
- |
| 14.1(Construction) |
- |
500 |
|
- |
| 14.2(Construction) |
- |
500 |
|
- |
| 14.3(Construction) |
- |
500 |
|
- |
| 14.4(Construction) |
- |
500 |
|
- |
| 14.5(Construction) |
- |
500 |
|
- |
| 14.6(Construction) |
- |
500 |
|
- |
| 14.7(Construction) |
- |
500 |
|
- |
| 14.8(Construction) |
- |
500 |
|
- |
| 14.9(Construction) |
- |
500 |
|
- |
| 14.1(Construction) |
- |
500 |
|
- |
| 14.11(Construction) |
- |
500 |
|
- |
| 14.12(Construction) |
- |
500 |
|
- |
| 14.13(Construction) |
- |
500 |
|
- |
| 14.14(Construction) |
- |
500 |
|
- |
| 15.1(Protection of cords and wires) |
- |
500 |
|
- |
| 15.2(Protection of cords and wires) |
- |
500 |
|
- |
| 16.0(Components) |
- |
2000 |
|
- |
| 17 Table-1(Screws and connections) |
- |
1000 |
|
- |
| 17 Table-1(Nominal daimeter of screws made of insulating material) |
- |
1000 |
|
- |
| 18.0(Clearance and creepage distance) |
- |
1000 |
|
- |
| 19.1(Ball pressure test IEC 60695-10-2) |
- |
500 |
|
- |
| 19.2.1(Glow wire test IEC 60695-2-11) |
- |
500 |
|
- |
| 19.2.2(Needle flame test) |
- |
1000 |
|
- |
| 20.0(Radiation, toxicity and similar hazards) |
- |
2000 |
|
- |
| 14.15(Construction) |
- |
500 |
|
- |
| 14.16(Construction) |
- |
500 |
|
- |
| 9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
- |
| 9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
- |
| 9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
- |
| 9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 ) |
- |
3000 |
|
- |
| 9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9) |
- |
3000 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5559 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 5557 (2004) |
Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision) |
- |
9550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil) |
- |
900 |
|
- |
| 5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design) |
- |
100 |
|
- |
| 5/5.1.2 -IS 1638(REQUIREMENTS-Size) |
- |
100 |
|
- |
| 5/5.1.3-Table1(REQUIREMENTS-Thickness) |
- |
100 |
|
- |
| 5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components) |
- |
100 |
|
- |
| 5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric-
accordance with IS 1969) |
- |
100 |
|
- |
| 5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap-
an per IS 5852) |
- |
100 |
|
- |
| 5/5.1.6/5.1.6.1-Fig. 1,
Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction) |
- |
180 |
|
- |
| 5/5.1.6/5.1.6.2(REQUIREMENTS- Construction) |
- |
180 |
|
- |
| 5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment-
as per IS 3400 (Part 4)) |
- |
2000 |
|
- |
| 5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength) |
- |
500 |
|
- |
| 5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance-
as per Annex B.) |
- |
1500 |
|
- |
| 5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test) |
- |
900 |
|
- |
| 5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test-
as per IS IS 3400 (Part 5)) |
- |
800 |
|
- |
| 5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test-
as per Annex C) |
- |
630 |
|
- |
| 5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots) |
- |
180 |
|
- |
| 5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil) |
- |
900 |
|
- |
| 5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design) |
- |
100 |
|
- |
| 5/5.1.2 -IS 1638(REQUIREMENTS-Size) |
- |
100 |
|
- |
| 5/5.1.3-Table1(REQUIREMENTS-Thickness) |
- |
180 |
|
- |
| 5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components) |
- |
100 |
|
- |
| 5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric-
accordance with IS 1969) |
- |
100 |
|
- |
| 5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap-
an per IS 5852) |
- |
500 |
|
- |
| 5/5.1.6/5.1.6.1-Fig. 1,
Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction) |
- |
100 |
|
- |
| 5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment-
as per IS 3400 (Part 4)) |
- |
2000 |
|
- |
| 5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength) |
- |
500 |
|
- |
| 5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance-
as per Annex B.) |
- |
1500 |
|
- |
| 5, 5.1(Requirement) |
- |
100 |
|
- |
| 6.1(Marking) |
- |
180 |
|
- |
| 6, 6.1(Packing) |
- |
180 |
|
- |
| 6.2(Packing) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5560 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 14544 (1998) |
Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification |
- |
17078 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Types) |
- |
100 |
|
- |
| 5, 5.1(Requirements ) |
- |
100 |
|
- |
| 5.2, 5.2.1, 5.2.1.1(Materials - Upper Leather
) |
- |
100 |
|
- |
| 5.2.2(Materials - Insole Material
) |
- |
100 |
|
- |
| 5.2.3(Materials - Stiffener
) |
- |
100 |
|
- |
| 5.2.4(Materials - Lining Material
) |
- |
100 |
|
- |
| 5.2.5(Materials - Threads
) |
- |
100 |
|
- |
| 5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks ) |
- |
100 |
|
- |
| 5.2.6, 5.2.6.2(Materials - Grinderies - Shanks) |
- |
100 |
|
- |
| 5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets) |
- |
100 |
|
- |
| 5.2.7(Materials - Cotton NEWAR) |
- |
100 |
|
- |
| 5.2.8(Materials - Toe-Compound) |
- |
100 |
|
- |
| 5.2.9(Materials - Laces) |
- |
100 |
|
- |
| 5.2.10(Materials - Steel Toe Cap) |
- |
100 |
|
- |
| 5.2.11.1 (Table 1)(Sole and Heel ) |
- |
100 |
|
- |
| 5.2.11.2(Sole and Heel ) |
- |
100 |
|
- |
| 5.2.11.3 (Table 2)(Sole and Heel ) |
- |
100 |
|
- |
| 5.2.11.4(Sole and Heel ) |
- |
100 |
|
- |
| 5.3 (Table 3)(Components) |
- |
180 |
|
- |
| 5.4.8(Workmanship and Finish) |
- |
180 |
|
- |
| 5.5, 5.5.1(Mass) |
- |
150 |
|
- |
| 5.5, 5.5.2(Mass) |
- |
150 |
|
- |
| 5.5, 5.5.3(Mass) |
- |
150 |
|
- |
| 5.6(Performance Test) |
- |
630 |
|
- |
| 5.7, 5.7.1(Adhesion Test on Moulded Bottoms) |
- |
1000 |
|
- |
| 5.7, 5.7.2(Adhesion Test on Moulded Bottoms) |
- |
1000 |
|
- |
| 7, 7.1(Marking) |
- |
180 |
|
- |
| 7.1.1, 7.1.2(Marking) |
- |
180 |
|
- |
| 5.7(Adhesion Test ) |
- |
1000 |
|
- |
| 5.6(Impact resistance ) |
- |
630 |
|
- |
| 5.5(Mass per pairs) |
- |
150 |
|
- |
| 5.4(Construction) |
- |
180 |
|
- |
| 5.3(Thickness of components ) |
- |
180 |
|
- |
| 5.2.11.4(Ageing Test) |
- |
2700 |
|
- |
| 5.2.11.2(Mass after resistance to chemical effect) |
- |
150 |
|
- |
| 5.2.11(Flexing Resistance ) |
- |
2000 |
|
- |
| 5.2.11(Tensile Strength ) |
- |
500 |
|
- |
| 5.2.11(Elongation at break) |
- |
500 |
|
- |
| 5.2.11(Hardness (IRHD)) |
- |
600 |
|
- |
| 5.2.11(Material Sole & heel ) |
- |
100 |
|
- |
| 5.2.9(Length ) |
- |
100 |
|
- |
| 5.2.8(Toe-compound ) |
- |
100 |
|
- |
| 5.2.7(Width of fabric) |
- |
100 |
|
- |
| 5.2.6.3(Eyelets diameter) |
- |
100 |
|
- |
| 5.2.6.2(Corrosion Shanks ) |
- |
100 |
|
- |
| 5.2.6.1(Corrosion test Lasting tacks) |
- |
100 |
|
- |
| 5.2.5(Breaking Strength ) |
- |
500 |
|
- |
| 5.2.5(Twist) |
- |
100 |
|
- |
| 5.2.5(Count) |
- |
100 |
|
- |
| 5.2.5(Composition ) |
- |
100 |
|
- |
| 5.2.4(Lining Material ) |
- |
100 |
|
- |
| 5.2.3(Peel Strength ) |
- |
100 |
|
- |
| 5.2.3(Moisture) |
- |
100 |
|
- |
| 5.2.3(Resilience Test) |
- |
100 |
|
- |
| 5.2.3(Shape Retention) |
- |
100 |
|
- |
| 5.2.3(Hardness ) |
- |
600 |
|
- |
| 5.2.3(Dry collapsing) |
- |
100 |
|
- |
| 5.2.2(Insole Material ) |
- |
100 |
|
- |
| 5.2(Material ) |
- |
100 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5561 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 13995 (1995) |
Unlined moulded rubber boots - Specification |
- |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.7(Size) |
- |
100 |
|
- |
| 5.1.6(Design) |
- |
100 |
|
- |
| 5.1.5(Flexing resistance of upper) |
- |
1500 |
|
- |
| 5.1.4(Resistance to dry heat ageing ) |
- |
2000 |
|
- |
| 5.1.3(Tear Strength) |
- |
500 |
|
- |
| 5.1.2(Tensile Strength (after ageing)) |
- |
2700 |
|
- |
| 5.1.1(Tensile Strength (before ageing)) |
- |
500 |
|
- |
| 4.1(Thickness ) |
- |
180 |
|
- |
| 6, 6.1(Marking) |
- |
180 |
|
- |
| Cl.6, 6.1(Marking) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5562 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 11544 (1986) |
Specification for slipper, rubber |
- |
4500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.6(Thickness of components) |
- |
180 |
|
- |
| 3.2.5(Type of Thread) |
- |
180 |
|
- |
| 3.2(Flexural endurance) |
- |
1500 |
|
- |
| 3.2(Hardness after ageing) |
- |
600 |
|
- |
| 3.2(Hardness (IRHD)) |
- |
600 |
|
- |
| 3.2(Relative density ) |
- |
300 |
|
- |
| 3.1(Shape & Design) |
- |
100 |
|
- |
| 3.2.4(Colour fasntess to washing) |
- |
100 |
|
- |
| 3.2.4(Picks per cm) |
- |
100 |
|
- |
| 3.2.4(End per cm) |
- |
100 |
|
- |
| 3.2.4(Mass per unit area) |
- |
100 |
|
- |
| 3.2.2(Bottom Filling Material) |
- |
100 |
|
- |
| 3.2.4.1(Weave of fabrics) |
- |
100 |
|
- |
| 3.2.7(vulcanized process) |
- |
100 |
|
- |
| 3.2.8(Workmanship and Finish -) |
- |
100 |
|
- |
| 3.2.9(Preservation -) |
- |
100 |
|
- |
| Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing) |
- |
180 |
|
- |
| Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5563 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 11226 (1993) |
Leather safety footwear having direct moulded rubber sole specification (First Revision) |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2(Materials) |
- |
100 |
|
- |
| 5.2.1(Materials) |
- |
100 |
|
- |
| 5.2.1.1(Materials) |
- |
100 |
|
- |
| 5.2.2(Materials) |
- |
100 |
|
- |
| 5.2.3(Materials) |
- |
100 |
|
- |
| 5.2.4(Materials) |
- |
100 |
|
- |
| 5.2.5(Materials) |
- |
100 |
|
- |
| 5.2.6(Materials) |
- |
100 |
|
- |
| 5.2.6.1(Materials) |
- |
100 |
|
- |
| 5.2.6.2(Materials) |
- |
100 |
|
- |
| 5.2.6.3(Materials) |
- |
100 |
|
- |
| 5.2.7(Materials) |
- |
100 |
|
- |
| 5.2.8(Materials) |
- |
100 |
|
- |
| 5.2.9(Materials) |
- |
100 |
|
- |
| 5.2.10(Materials) |
- |
100 |
|
- |
| 5.2.11(Materials) |
- |
100 |
|
- |
| 5.2.11.1(Materials) |
- |
100 |
|
- |
| 5.2.11.2(Materials) |
- |
100 |
|
- |
| 5.2.11.3(Materials) |
- |
100 |
|
- |
| 5.3(Components) |
- |
180 |
|
- |
| 5.4( Manufacture ) |
- |
100 |
|
- |
| 5.4.1( Manufacture ) |
- |
100 |
|
- |
| 5.5(Mass) |
- |
150 |
|
- |
| 5.6(Performance Test) |
- |
630 |
|
- |
| 5.7(Adhesion Test on Moulded Bottoms) |
- |
1000 |
|
- |
| 7(MARKING) |
- |
180 |
|
- |
| 5.7(Toe adhesion ) |
- |
1000 |
|
- |
| 5.6.(Toe Impact test) |
- |
1000 |
|
- |
| 5.4(Dimension ) |
- |
100 |
|
- |
| 5.3 & 5.4.2(Thickness of components ) |
- |
100 |
|
- |
| 5.2.11.2(Flexing resistance) |
- |
1200 |
|
- |
| 5.2.11.2(Elongation at break) |
- |
500 |
|
- |
| 5.2.11.2(Tensile Strength) |
- |
500 |
|
- |
| 5.2.11.2(Hardness (Shore A)) |
- |
300 |
|
- |
| 5.2.11(Hardness (IRHD)-after ageing) |
- |
300 |
|
- |
| 5.2.11(Flexing resistance) |
- |
2000 |
|
- |
| 5.2.11(Elongation at break) |
- |
500 |
|
- |
| 5.2.11(Tensile Strength) |
- |
509 |
|
- |
| 5.2.11(Relative density ) |
- |
300 |
|
- |
| 5.2.11(Hardness (IRHD)) |
- |
500 |
|
- |
| 5.3(Components) |
- |
100 |
|
- |
| 5.5(Mass) |
- |
500 |
|
- |
| 5.6.(Toe Impact test) |
- |
630 |
|
- |
| 5.3 & 5.4.2(Thickness of components ) |
- |
180 |
|
- |
| 5.2.11(Tensile Strength) |
- |
500 |
|
- |
| 5.2.11(Hardness (IRHD)) |
- |
300 |
|
- |
| 5.1(REQUIREMENTS) |
- |
100 |
|
- |
| 5.2.11.2(Resistance to Fuel Oil) |
- |
300 |
|
- |
| 5.4.8(Workmanship and Finish) |
- |
100 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5564 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 6719 (1972) |
Solid Pvc Soles And Heels |
- |
3500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.6.1(Hardness ) |
- |
600 |
|
- |
| 3.6 (vi)(Lead (as Pb) ppm) |
- |
990 |
|
- |
| 3.6 (v)(Volatility, percent by means ) |
- |
800 |
|
- |
| 3.6 (iv)(Tear Strength a) Force Part b) Back Part ) |
- |
500 |
|
- |
| 3.6 (iii)(Elongation at break, percent ) |
- |
500 |
|
- |
| 3.6 (ii)(Tensile Strength ) |
- |
500 |
|
- |
| 3.6 (i)(Relative density ) |
- |
300 |
|
- |
| Cl. 3.1,3.2,3.3,3.4,3.5(Material) |
- |
150 |
|
- |
| Cl. 6.4(Measurement of thickness) |
- |
500 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5565 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 6664 (1992) |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
- |
6500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Size & Thickness ) |
- |
180 |
|
- |
| 4, Cl.4.1,4.1.1,4.1.2(Requirements) |
- |
150 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density) |
- |
300 |
|
- |
| Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min) |
- |
300 |
|
- |
| Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr) |
- |
2300 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max) |
- |
700 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min) |
- |
500 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
1000 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max) |
- |
1000 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max) |
- |
630 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles) |
- |
1200 |
|
- |
| 5, 5.1(Marking) |
- |
180 |
|
- |
| 6, 6.1(Packing) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5566 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 15844 (2010) |
Sports Footwear Specification |
- |
22000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.11(Corrosion resistance) |
- |
700 |
|
- |
| 3.10(Ross Flex test) |
- |
1000 |
|
- |
| 3.10(Collapsing load ) |
- |
800 |
|
- |
| 3.10(Crush load ) |
- |
500 |
|
- |
| 3.9(Lace abrasion test) |
- |
800 |
|
- |
| 3.9(Griping Strength of Tags) |
- |
500 |
|
- |
| 3.9(Colour migration / Colour fastness) |
- |
300 |
|
- |
| 3.9(Breaking Strength ) |
- |
500 |
|
- |
| 3.8(Heat resistance tester ) |
- |
500 |
|
- |
| 3.8(Compression set ) |
- |
1000 |
|
- |
| 3.8(Die-C tear Strength ) |
- |
500 |
|
- |
| 3.8(Elongation at Break ) |
- |
500 |
|
- |
| 3.8(Tensile Strength) |
- |
500 |
|
- |
| 3.7(Flexing index) |
- |
500 |
|
- |
| 3.7(Abrasion resistance ) |
- |
800 |
|
- |
| 3.7(Water absorption & loss percent ) |
- |
630 |
|
- |
| 3.7(Tensile Strength) |
- |
500 |
|
- |
| 3.6(Ross flexing ) |
- |
2000 |
|
- |
| 3.6(Adhesion to mid sole ) |
- |
800 |
|
- |
| 3.6(Abrasion resistance ) |
- |
1080 |
|
- |
| 3.6(Die-C tear Strength ) |
- |
500 |
|
- |
| 3.6(Trouser tear strength ) |
- |
500 |
|
- |
| 3.5(Heat resistance tester ) |
- |
500 |
|
- |
| 3.5(Adhesive to sole) |
- |
800 |
|
- |
| 3.5(Compression set ) |
- |
1000 |
|
- |
| 3.5(Die-C tear Strength ) |
- |
500 |
|
- |
| 3.5(Split tear strength ) |
- |
500 |
|
- |
| 3.5(Elongation at Break ) |
- |
500 |
|
- |
| 3.5(Tensile Strength) |
- |
500 |
|
- |
| 3.4(Colorfastness to light ) |
- |
300 |
|
- |
| 3.4(Colour fastness to crocking ) |
- |
300 |
|
- |
| 3.4(Tear Strength) |
- |
500 |
|
- |
| 3.4(Elongation at Break ) |
- |
500 |
|
- |
| 3.4(Tensile Strength) |
- |
500 |
|
- |
| 3.4(Adhesive Strength ) |
- |
800 |
|
- |
| 3.4(Hydrolysis ) |
- |
1000 |
|
- |
| 3.4(Upper flexing resistance ) |
- |
1000 |
|
- |
| 3.3.4(Energy absorption of seat region ) |
- |
630 |
|
- |
| 3.3.3(Sole /midsole bond strength ) |
- |
800 |
|
- |
| 3.3.2(Upper/outsole bond strength) |
- |
800 |
|
- |
| 3.3.1(Contruction) |
- |
100 |
|
- |
| 3.2.3 & 3.2.4(Visual ) |
- |
100 |
|
- |
| 3.2.1(Design ) |
- |
100 |
|
- |
| Cl. 3.6,Table 7,IS 3400(Part 17), iv)(Tear strength, kg/cm, Min) |
- |
500 |
|
- |
| Cl. 3.4,Table 3(Lastometer test, mm, Min) |
- |
500 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5567 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 3976 (2018) |
Safety Rubber Canvas Boots for Miners †Specification ( Sixth Revision ) |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
100 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
600 |
|
- |
| Cl.6.3 Tear Strength of Compact Outsole(
When outsoles are tested in accordance to 8.2 of
IS 15298 (Part 1), the tear strength shall be not less
than 8 kN/m for material having density higher
than 0.9/cm³ and when density of material is less than
or equal to 0.9 g/cm³, tear strength shall not be less
than 5 kN/m.) |
- |
500 |
|
- |
| Cl.5.2.3 Coated Binding Material
IS 1954(
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
150 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water coefficient as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
1350 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
1000 |
|
- |
| Cl.5.2.3 Coated Binding Material
IS 1954(
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
500 |
|
- |
| Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method
prescribed in 5.14 of IS 15298 (Part 1), the energy
absorption of the seat region shall not be less than 20 J.) |
- |
630 |
|
- |
| Cl.5.2.3 Coated Binding Material
Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) ) |
- |
500 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water
vapour permeability as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
500 |
|
- |
| CL.5.2.10 Counter Stiffener(
A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having
thickness not less than 1.5 mm is to be stitched at inside
of upper so as to fortify the back of the footwear at
joints of quarter.) |
- |
100 |
|
- |
| Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9
of IS 1638 (measurement of men’s lasts) and Table 8
of IS 1638 (measurement of women’s lasts).) |
- |
100 |
|
- |
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
500 |
|
- |
| Cl.5.2.3 Coated Binding Material
IS 1954(
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
800 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water coefficient as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
500 |
|
- |
| Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method
prescribed in 5.14 of IS 15298 (Part 1), the energy
absorption of the seat region shall not be less than 20 J.) |
- |
1350 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water
vapour permeability as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
1350 |
|
- |
| Cl.5.2.1.2( Composite upper material shall comply with
tear strength as per 5.4.3 of IS 15298 (Part 2).) |
- |
500 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
500 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water
vapour permeability as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
630 |
|
- |
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
1350 |
|
- |
| Cl.5.2.1.3 ,
Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance
with 6.5 of IS 15298 (Part 1).) |
- |
1000 |
|
- |
| Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).) |
- |
100 |
|
- |
| Cl.5.2.2 Compact Insole/Compact Insocks/Counter
Stiffener Lining(Textile material shall be used as lining material for
compact insole/compact insocks / counter stiffener. It
shall meet the requirement of tear strength as prescribed
in 5.6.1 of IS 15298 (Part 2).) |
- |
500 |
|
- |
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener(
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
1350 |
|
- |
| Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in
accordance with Annex B.) |
- |
800 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
100 |
|
- |
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
600 |
|
- |
| Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when
the outer sole heel is made of bi-polymer, the finished
boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not
develop any sign of tackiness or brittleness.) |
- |
1000 |
|
- |
| Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall
comply with the thickness and material requirements
prescribed in Table 3.) |
- |
180 |
|
- |
| Cl.5.2.6 Thread for Upper Closing(
The length (m/kg) and construction of sewing thread
shall conform to requirements as prescribed in
Table 4.) |
- |
100 |
|
- |
| Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.) |
- |
100 |
|
- |
| Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum
100 cm for Type 2.) |
- |
180 |
|
- |
| Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be
achieved when tested between 18 cm grip length in
accordance with Annex C.) |
- |
500 |
|
- |
| Cl.5.2.8.3( In case of cotton lace of black colour, the same
shall be free from sulphur dyes when tested in
accordance with Annex B. Two ends of the laces shall
be provided with plastic tips.) |
- |
800 |
|
- |
| Cl.5.2.9 Eyelets(
Aluminum eyelets of external collar diameter not less
than 10 mm and wall thickness of 0.30 to 0.35 mm
shall be used.) |
- |
100 |
|
- |
| Cl.5.3.2 (The tongue shall be made out of composite upper
material and shall be half bellow type for Type 2 and
full bellow type for Type 1.) |
- |
100 |
|
- |
| Cl.5.3.5 Outer toe cap( shall be provided which is made
of polymer/rubber and it shall be strongly adhered such
that it shall not open up or come out while in use. Toe
of the boot shall be reinforced with safety toe cap) |
- |
100 |
|
- |
| Cl.5.3.6( A designed foxing of width of minimum 25 mm
and of thickness of minimum 2 mm is to be provided.
The foxing shall not extend the edges of the outer
sole.) |
- |
100 |
|
- |
| Cl.5.3.7( Two pairs of detachable insocks are to be
provided. The insocks shall be compact in nature having
thickness not less than 2 mm.) |
- |
100 |
|
- |
| Cl.5.4 Finish(
In appearance, general workmanship and in all other
respects with regard to finish and get up of the footwear,
the footwear shall be matching to the approved sample
of the purchaser.) |
- |
100 |
|
- |
| Cl.5.5 Mass(The mass of one pair of finished footwear of size 8
shall not exceed 1 500 g for Type 1 and 1 400 g for
Type 2 with an increase or decrease of 100 g for each
bigger or smaller size, respectively.) |
- |
150 |
|
- |
| Cl.5.6( Height of Upper
Height of upper of the boots shall conform to column 5
(Design C) and column 4 (Design B) of 5.2.2, Table 4
of IS 15298 (Part 2) for Type 1 and Type 2, respectively
when measured as per 6.2 of IS 15298 (Part 1) on the
inside of the back of the footwear and from seat of the
insole to top edge of the upper.) |
- |
180 |
|
- |
| Cl.5.7 Performance Test(When safety footwear is tested in accordance with the
method described in 5.4 of IS 15298 (Part 1), at an
impact energy of (200 ± 4) J, the clearance under the
toecap at the moment of impact shall be in accordance
with Table 5. In addition, the toecap shall not develop
any cracks which go through the material, that is,
through which light can be seen.) |
- |
630 |
|
- |
| Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the
method prescribed in 5.2 of IS 15298 (Part 1), the bond
strength shall not be less than 4.0 N/mm, unless there
is tearing of the sole in which case the bond strength
shall not be less than 3.0 N/mm.) |
- |
800 |
|
- |
| Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer(
and Bi-density Sole
When tested in accordance with 5.2 of IS 15298 (Part 1),
the bond strength between the outer or cleated layer
and the adjacent layer shall not be less than 4.0 N/mm
unless there is tearing of any part of the sole, in which
case the bond strength shall not be less than 3.0 N/mm.) |
- |
800 |
|
- |
| Cl.5.10 Consolidation Test(
Representative sample of width 25 ± 0.5 mm are cut
out from the quarter of the upper along the length of
boot. The plies are separated by breaking the bond.
Carry out the test on two specimens in accordance with
IS 3400 (Part 5). Th) |
- |
800 |
|
- |
| Cl.5.11 Compression Resistance(
5.11.1 When safety boots are tested in accordance
with 5.5 of IS 15298 (Part 1), the clearance under the
toe cap at a compression load of 15 kN ± 0.1 kN shall
be in accordance with Table 5.) |
- |
630 |
|
- |
| Cl.5.12 Internal Length of Toe Cap(
For safety boots, internal length of the toe cap shall
meet the specification given in Table 5 of IS 15298
(Part 2) when tested as per 5.3 of IS 15298 (Part 1).) |
- |
180 |
|
- |
| Cl.6.1 Abrasion Resistance of Compact Outsole(
When outsole is tested in accordance with 8.3 of
IS 15298 (Part 1), the relative volume loss shall not
be greater than 250 mm³ for materials having density
0.9 g/cm³ or less, and not greater than 150 mm³ for
materials with density greater than 0.9 g/cm³.) |
- |
1080 |
|
- |
| Cl.6.2 Flexing Resistance of Compact Outsole(
When outsole is tested in accordance with 8.4 of
IS 15298 (Part 1), the cut growth shall not be greater
than 4 mm before 30 000 cycles.) |
- |
1080 |
|
- |
| Cl.6.4 Resistance to Hot Contact( — Sole Heel
When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform
and shall not develop any cracks when bent around the
mandrel.) |
- |
800 |
|
- |
| Cl.6.5 Hydrolysis(
When bottom sole or other components are made out
of polyurethane, the same shall be tested in accordance
with 8.5 of IS 15298 (Part 1) and the same shall comply
with 5.8.5 of IS 15298 (Part 2).) |
- |
2700 |
|
- |
| 5.2.4(Reinforcing Material) |
- |
100 |
|
- |
| 5.2.8.4(Colour of the lace) |
- |
100 |
|
- |
| Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4) |
- |
100 |
|
- |
| 8(CHEMICAL REQUIREMENTS) |
- |
4450 |
|
- |
| 10(Marking) |
- |
180 |
|
- |
| 11(PACKING) |
- |
180 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5568 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 3736 (1995) |
Canvas boots, rubber sole - Specification (Second Revision) |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5.
i) Tensile Length) |
- |
500 |
|
- |
| Cl.4.1.7.4 Ageing(ii) Elongation at break) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 2) : 1980(2)Hardness, IRHD) |
- |
500 |
|
- |
| 4.1.6 Fabric Laces
Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. ) |
- |
1000 |
|
- |
| Cl.4.1.1 upper IS 1969(d) Picks/dm) |
- |
500 |
|
- |
| Cl.4.4.5 ( Table 1.)(c) Ends/dm
) |
- |
500 |
|
- |
| 4.1.2 Lining Material(having 390 ± 10 ends/dm and ) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 4) : 1987
IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing
for 24 h at l00 ± 1°C) |
- |
500 |
|
- |
| Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of
8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of
sufficient lengh to permit separation over a length of at least 75 mm. Carry out
the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10
mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead
Load Method as given in Annex C.
The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf)
for each of the test pieces ( see Note under 4.7 ).') |
- |
1000 |
|
- |
| Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm
width strip is to be cut along the length of the boot of enough length so as to
make it convenient to allow a distance of minimum 30 mm between the jaws
of the tensile machine) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min) |
- |
500 |
|
- |
| Cl.4.1.3 Binding Material
IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in
Table 2, when tested in accordance with the methods referred to in col 4 of Table 2.
1)Width, mm. Min
) |
- |
500 |
|
- |
| Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.) |
- |
500 |
|
- |
| Cl.4.1.7.3
IS 3400 (Part 10) : 1977(Compression set, in percent. Max) |
- |
500 |
|
- |
| Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip
shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.) |
- |
500 |
|
- |
| Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation
test shall not be less than 30 N (3.0 kgf) for each of the test pieces) |
- |
1000 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min) |
- |
500 |
|
- |
| 4.1.6 Fabric Laces
Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. ) |
- |
500 |
|
- |
| Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of
8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of
sufficient lengh to permit separation over a length of at least 75 mm. Carry out
the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10
mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead
Load Method as given in Annex C.
The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf)
for each of the test pieces ( see Note under 4.7 ).') |
- |
500 |
|
- |
| Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation
test shall not be less than 30 N (3.0 kgf) for each of the test pieces) |
- |
500 |
|
- |
| IS 1969:1985(Breaking load on 50 cm
test length. N, Min) |
- |
500 |
|
- |
| 4.1.6 Fabric Laces
Cl.4.1.6.1(The laces shall have a minimum
breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.) |
- |
500 |
|
- |
| Cl.4.1.7 Rubber Components
Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles
b)Cut growth at the end of 150 000 cycles,
Percent, Max) |
- |
500 |
|
- |
| Cl.4.4.5 ( Table 1.)(b) Weft
) |
- |
500 |
|
- |
| Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth
as prescribed in Sl No. (i) of Table 1.
Breaking load in N, Min
a) Warp
) |
- |
500 |
|
- |
| Cl.4.1.1 upper IS 1969(b)Weft) |
- |
500 |
|
- |
| Cl.4.1.1 upper IS 1969(Breaking load in
N.Min (5 × 20 cm grip): a) Wrap) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles
a)Initial crack, Min) |
- |
500 |
|
- |
| 4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) ) |
- |
500 |
|
- |
| 4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N
Min in warp way and) |
- |
500 |
|
- |
| Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend
being the over layer and cotton drill as an inner layer and shall conform to the
requirements given at Sl No. (i) of Table
1. Sr.no 1.Overlayer Construction
) |
- |
500 |
|
- |
| 4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight
shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.) |
- |
500 |
|
- |
| Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979) |
- |
500 |
|
- |
| Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.) |
- |
500 |
|
- |
| Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming
to Sl No. (i) of Table 1) |
- |
500 |
|
- |
| Cl.4.1.5 Thread for Upper Closing
Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching
of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720.
Polyester variety thread shall conform to variety No. 9 of IS 9543.
Any other blend of thread would have breaking load not less than above referred
requirements.
Sewing thread cotton, manmade or blended shall be used for binding of upper.
For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester
variety thread shall conform to variety No. 5 of IS 9543.
Any other blend of thread would have breaking load not less than above referred
requirement of specification.') |
- |
500 |
|
- |
| Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements) |
- |
500 |
|
- |
| 4.1.6 Fabric Laces
Cl.4.1.6.1(The two ends of the lace shall
be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.) |
- |
500 |
|
- |
| Cl.4.1.7.2
IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.'
( Page 3, Table 4, Note 1) —
'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed.
1)Relative density, Max) |
- |
500 |
|
- |
| Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed
in Table 6.) |
- |
500 |
|
- |
| Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.) |
- |
500 |
|
- |
| Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.) |
- |
500 |
|
- |
| Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety
No. 29 for taping and binding and variety No. 8 for remaining seams. ) |
- |
500 |
|
- |
| Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.) |
- |
500 |
|
- |
| Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm
diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.') |
- |
500 |
|
- |
| Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the
top edge with white cloth
for binding of countertop edge with white clothfor binding of counter) |
- |
500 |
|
- |
| Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece,
circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside) |
- |
500 |
|
- |
| Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick
rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of
the boot. The golosh shall not extend below the edge of the sole.) |
- |
500 |
|
- |
| Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed
in 4.1.6.) |
- |
500 |
|
- |
| Cl.4.5.2( In appearance, general workmanship, finish
and in all other respects, not defined in this
standard, the boot shall be similar to those of the
sample approved by the purchaser, if any.) |
- |
500 |
|
- |
| Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.) |
- |
500 |
|
- |
| Cl.4.9 Composite Breaking Strength Test(
From the upper of made up footwear representative sample of width 25 ± 0.5 mm
width strip is to be cut along the length of the boot of enough length so as to
make it convenient to allow a distance of minimum 30 mm between the jaws
of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute.
Two such test pieces will be required to be obtained from the made up footwear
and will be subjected to test to break each test piece.
Mean value of each set of test pieces comprising of length wise and height wise
test pieces will be 1 000 N/25 mm width minimum.') |
- |
500 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5569 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 9873 : Part 2 (2017) |
Safety of toys: Part 2 flammability (Third Revision) |
Electric Toys and Non-Electric toys (all ranges) |
2000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
2000 |
|
10% discount for BIS |
| 4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more) |
- |
2000 |
|
10% discount for BIS |
| 4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm) |
- |
2000 |
|
10% discount for BIS |
| 4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
2000 |
|
10% discount for BIS |
| 4.5-5.5(Soft-filled toys-Test for soft-filled toys
) |
- |
2000 |
|
10% discount for BIS |
| 4.5-5.5(Soft-filled toys-rate of spread of flame ) |
- |
2000 |
|
10% discount for BIS |
| 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those
covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child
) |
- |
2000 |
|
10% discount for BIS |
| 4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those
covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child
) |
- |
2000 |
|
10% discount for BIS |
| 4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those
covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child) |
- |
2000 |
|
10% discount for BIS |
| 4.4-5.4(Toys intended to be entered by a child-rate of spread of flame) |
- |
2000 |
|
10% discount for BIS |
| 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play) |
- |
2000 |
|
10% discount for BIS |
| 4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child) |
- |
2000 |
|
10% discount for BIS |
| 4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame) |
- |
2000 |
|
10% discount for BIS |
| 4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child
) |
- |
2000 |
|
10% discount for BIS |
| 4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame) |
- |
2000 |
|
10% discount for BIS |
| 4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame) |
- |
2000 |
|
10% discount for BIS |
| 4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame) |
- |
2000 |
|
10% discount for BIS |
| 4.1(General) |
- |
200 |
|
10% discount for BIS |
|
19 Jul, 2027 |
-
- |
| 5570 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 798 (2020) |
Orthophosphoric Acid — Specification ( Third Revision ) |
Orthophosphoric Acid (Any Grade) |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (i)(Relative density ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (ii)(Orthophosphoric acid (H3 PO4 )) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (iii)(Iron (as Fe), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (iv)(Chlorides (as Cl), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (v)(Sulphates (as SO4 ), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (vi)(Arsenic (as As2 O3 ), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (vii)(Antimony (as Sb2 O3 ), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (viii)(Nitrates (as NO3 ),) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (ix)(Lead (as Pb), parts per million, Max) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (x)(Silica (as SiO2 ), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xi)(Calcium (as Ca) and Magnesium (as Mg), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xii)(Oxygen absorbed (as O),) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xiii)(Volatile acids) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xiv)(Manganese (as Mn), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xv)(Molybdenum (as Mo), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xvi)(Mercury (as Hg), ) |
- |
2000 |
|
- |
| 5.2.2 Table 1 (xvii)(Aluminium (as Al), ) |
- |
2000 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5571 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 302 : Part 2 : Sec 14 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision) |
--- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Classification- IS 302-1 ) |
- |
0 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.3(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.4(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.6(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.7(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.8(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.11(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.12(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.13(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.14(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.15(Marking- IS 302-1) |
- |
0 |
|
- |
| 7.101(Marking) |
- |
1000 |
|
- |
| 8( Protection Against Electric Shock, IS 302-1) |
- |
2000 |
|
- |
| 10(Power Input and Current, IS 302-1) |
- |
2000 |
|
- |
| 11(Heating, IS 302-1) |
- |
2000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
1000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
1000 |
|
- |
| 14(Transient Over Voltages, IS 302-1) |
- |
10000 |
|
- |
| 15(Moisture Resistance, IS 302-1) |
- |
5000 |
|
- |
| 16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
1000 |
|
- |
| 16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
1000 |
|
- |
| 17(Overload protection of Transformers and Associated Circuits, IS 302-1) |
- |
5000 |
|
- |
| 19.1(Abnormal Operation, IS 302-1) |
- |
0 |
|
- |
| 19.7(Abnormal Operation, IS 302-1) |
- |
0 |
|
- |
| 19.8(Abnormal Operation, IS 302-1) |
- |
0 |
|
- |
| 19.9(Abnormal Operation, IS 302-1) |
- |
0 |
|
- |
| 19.101(Abnormal Operation) |
- |
1000 |
|
- |
| 19.102(Abnormal Operation) |
- |
2000 |
|
- |
| 19.11.4.1(Electrostatic discharges) |
- |
3000 |
|
- |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
- |
| 19.11.4.3(Fast transient bursts) |
- |
3000 |
|
- |
| 19.11.4.4(Surge immunity test) |
- |
3000 |
|
- |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
3000 |
|
- |
| 19.11.4.7(Harmonics) |
- |
0 |
|
- |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
| 32(Radiation, Toxicity and similar Hazard IS 302-1) |
- |
0 |
|
- |
| 31(Resistance of Rusting, IS 302-1) |
- |
5000 |
|
- |
| 30.2(Resistance to Heat and Fire, IS 302-1) |
- |
1000 |
|
- |
| 30.1(Resistance to Heat and Fire, IS 302-1) |
- |
1000 |
|
- |
| 29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2000 |
|
- |
|
19 Jul, 2027 |
-
Exclusion
Cl 19.11.4.2 to Cl 19.11.4.7 |
| 5572 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 1989 : Part 2 (1986) |
Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision) |
- |
7650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Marking) |
- |
180 |
|
- |
| 4(Marking) |
- |
180 |
|
- |
| 7(Design) |
- |
100 |
|
- |
| 8(a) Upper Leather) |
- |
500 |
|
- |
| 8(b) Lining Leather) |
- |
500 |
|
- |
| 8(c) Bottom Material) |
- |
500 |
|
- |
| 8(d) Steel Toe Cap) |
- |
500 |
|
- |
| 8(e) Tape) |
- |
500 |
|
- |
| 8(f) Bottom Filling) |
- |
500 |
|
- |
| 8(g) Eyelet) |
- |
500 |
|
- |
| 8(h) Toe Compound) |
- |
500 |
|
- |
| 8(i) Threads) |
- |
500 |
|
- |
| 8(j) Rivets) |
- |
500 |
|
- |
| 8(k) Screw Wire) |
- |
500 |
|
- |
| 8(l) Heel Pin) |
- |
500 |
|
- |
| 8(m) Shank) |
- |
500 |
|
- |
| 8(n) Laces) |
- |
500 |
|
- |
| 8(o) Tongue Lining) |
- |
500 |
|
- |
| 8(p) Adhesive) |
- |
500 |
|
- |
| 8(q) Strengthening Piece) |
- |
500 |
|
- |
| 8(r) Leather Components) |
- |
500 |
|
- |
| 9(Manufacture) |
- |
500 |
|
- |
| 10(Finish) |
- |
500 |
|
- |
| 11(a) Boots with Leather Sole and Heel) |
- |
150 |
|
- |
| 11(b) Boots with Rubber Sole and Heel) |
- |
150 |
|
- |
| 12(Performance Test) |
- |
630 |
|
- |
| 13(Design) |
- |
100 |
|
- |
| 14(a) Upper Leather) |
- |
100 |
|
- |
| 14(b) Lining Leather) |
- |
100 |
|
- |
| 14(c) Bottom Material) |
- |
100 |
|
- |
| 14(d) Steel Toe Cap) |
- |
100 |
|
- |
| 14(e) Tape) |
- |
100 |
|
- |
| 14(f) Bottom Filling) |
- |
100 |
|
- |
| 14(g) Eyelet) |
- |
100 |
|
- |
| 14(h) Toe Compound) |
- |
100 |
|
- |
| 14(i) Threads) |
- |
100 |
|
- |
| 14(j) Rivets) |
- |
100 |
|
- |
| 14(k) Screw Wire) |
- |
100 |
|
- |
| 14(l) Heel Pin) |
- |
100 |
|
- |
| 14(m) Shank) |
- |
100 |
|
- |
| 14(n) Laces) |
- |
100 |
|
- |
| 14(o) Tongue Lining) |
- |
100 |
|
- |
| 14(p) Adhesive) |
- |
100 |
|
- |
| 14(q) Leather Components) |
- |
100 |
|
- |
| 15(Manufacture) |
- |
100 |
|
- |
| 16(Finish) |
- |
500 |
|
- |
| 17(a) Shoes with Leather Sole and Heel) |
- |
150 |
|
- |
| 17(b) Shoes with Rubber Sole and Heel) |
- |
150 |
|
- |
| 18(Performance Test) |
- |
630 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5573 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 1989 : Part 1 (1986) |
Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision) |
Leather Safety Boots and Shoes |
10328 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (a)(Marking) |
- |
500 |
|
- |
| 4.1 (b)(Marking) |
- |
500 |
|
- |
| 4.1 (c)(Marking) |
- |
500 |
|
- |
| 4.1 (d)(Marking) |
- |
500 |
|
- |
| 4.1 (e)(Marking) |
- |
500 |
|
- |
| 7.1(Design) |
- |
500 |
|
- |
| 4.1 (a)(Marking) |
- |
500 |
|
- |
| 4.1 (b)(Marking) |
- |
500 |
|
- |
| 4.1 (c)(Marking) |
- |
500 |
|
- |
| 4.1 (d)(Marking) |
- |
500 |
|
- |
| 4.1 (e)(Marking) |
- |
500 |
|
- |
| 7.1(Design) |
- |
1000 |
|
- |
| 10.1(Finish) |
- |
2000 |
|
- |
| 10.3(Finish) |
- |
2000 |
|
- |
| 10.4(Finish) |
- |
2000 |
|
- |
| 11.1(Mass
Boots with Leather Sole and Heel) |
- |
2000 |
|
- |
| 12(Performance test) |
- |
5000 |
|
- |
|
19 Jul, 2027 |
-
- |
| 5574 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 16103 : Part 1 (2012) |
Led modules for general lighting: Part 1 safety requirements |
- |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking) |
- |
1000 |
|
5 % Discount for BIS |
| 8(Terminals) |
- |
2000 |
|
5 % Discount for BIS |
| 9(PROVISION FOR EARTHING) |
- |
2000 |
|
5 % Discount for BIS |
| 10(Protection against accidental contact with live parts) |
- |
2000 |
|
5 % Discount for BIS |
| 11(Mositure Resistance and Insulation) |
- |
10000 |
|
5 % Discount for BIS |
| 12(Electric Strength) |
- |
2000 |
|
5 % Discount for BIS |
| 13(Fault conditions) |
- |
2000 |
|
5 % Discount for BIS |
| 15(Construction) |
- |
2000 |
|
5 % Discount for BIS |
| 16(Creepage distance and clearances) |
- |
2000 |
|
5 % Discount for BIS |
| 17(Screws, current carrying parts and connections) |
- |
2000 |
|
5 % Discount for BIS |
| 18(Resistance to heat, fire and tracking) |
- |
2000 |
|
5 % Discount for BIS |
| 19(Resistance to corrosion) |
- |
5000 |
|
5 % Discount for BIS |
| 21(Heat management) |
- |
1000 |
|
5 % Discount for BIS |
|
19 Jul, 2027 |
-
- |
| 5575 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 10322 : Part 5 : Sec 2 (2012) |
Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision) |
- |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
500 |
|
5 % Discount for BIS |
| 5(Classification of Luminaires') |
- |
500 |
|
5 % Discount for BIS |
| 6(Marking) |
- |
1000 |
|
5 % Discount for BIS |
| 7(Construction) |
- |
2000 |
|
5 % Discount for BIS |
| 8(Creepage Distance and Clearances) |
- |
2000 |
|
5 % Discount for BIS |
| 9(Provision for earthing) |
- |
2000 |
|
5 % Discount for BIS |
| 10(Terminals) |
- |
2000 |
|
5 % Discount for BIS |
| 11(External & Internal Wiring) |
- |
2000 |
|
5 % Discount for BIS |
| 12(Protection against electric shock) |
- |
2000 |
|
5 % Discount for BIS |
| 13(Endurance Tests and Thermal Tests) |
- |
10000 |
|
5 % Discount for BIS |
| 14(Resistance to Dust and Moisture) |
- |
10000 |
|
5 % Discount for BIS |
| 15(Insulation Resistance and Electric Strength) |
- |
5000 |
|
5 % Discount for BIS |
| 16(Resistance to Heat , fire and tracking) |
- |
2000 |
|
5 % Discount for BIS |
| 17(Photometric Test) |
- |
0 |
|
5 % Discount for BIS |
|
19 Jul, 2027 |
-
- |
| 5576 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 10322 : PART 5 : SEC 3 (2012) |
Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) |
- |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
500 |
|
5 % Discount for BIS |
| 5(Classification of Luminaires') |
- |
500 |
|
5 % Discount for BIS |
| 6.0(Marking) |
- |
1000 |
|
5 % Discount for BIS |
| 7.0(Construction) |
- |
2000 |
|
5 % Discount for BIS |
| 8.0(Creepage Distance and Clearances) |
- |
2000 |
|
5 % Discount for BIS |
| 9.0(Provision for earthing) |
- |
2000 |
|
5 % Discount for BIS |
| 10.0(Terminals) |
- |
2000 |
|
5 % Discount for BIS |
| 11.0(External & Internal Wiring) |
- |
2000 |
|
5 % Discount for BIS |
| 12.0(Protection against electric shock) |
- |
2000 |
|
5 % Discount for BIS |
| 13.0(Endurance Tests and Thermal Tests) |
- |
10000 |
|
5 % Discount for BIS |
| 14.0(Resistance to Dust & Moisture) |
- |
10000 |
|
5 % Discount for BIS |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
5 % Discount for BIS |
| 16.0(Resistance to Heat , fire and tracking) |
- |
2000 |
|
5 % Discount for BIS |
| 17.0(Photometric Test) |
- |
0 |
|
5 % Discount for BIS |
|
19 Jul, 2027 |
-
- |
| 5577 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 10322 : Part 5 : Sec 5 (2013) |
Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision) |
- |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
500 |
|
5 % Discount for BIS |
| 5(Classification of Luminaires') |
- |
500 |
|
5 % Discount for BIS |
| 6.0(Marking) |
- |
1000 |
|
5 % Discount for BIS |
| 7.0(Construction) |
- |
500 |
|
5 % Discount for BIS |
| 8.0(Creepage Distance and Clearances) |
- |
2000 |
|
5 % Discount for BIS |
| 9.0(Provision for earthing) |
- |
2000 |
|
5 % Discount for BIS |
| 10.0(Terminals) |
- |
2000 |
|
5 % Discount for BIS |
| 11.0(External & Internal Wiring) |
- |
2000 |
|
5 % Discount for BIS |
| 12.0(Protection against electric shock) |
- |
2000 |
|
5 % Discount for BIS |
| 13.0(Endurance Tests and Thermal Tests) |
- |
10000 |
|
5 % Discount for BIS |
| 14.0(Resistance to Dust & Moisture) |
- |
10000 |
|
5 % Discount for BIS |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
5 % Discount for BIS |
| 16.0(Resistance to Heat , fire and tracking) |
- |
2000 |
|
5 % Discount for BIS |
|
19 Jul, 2027 |
-
- |
| 5578 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 9873 : Part 9 (2017) |
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products |
Electric Toys and Non-Electric toys (all ranges) |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
10% Discount for BIS samples |
|
19 Jul, 2027 |
-
- |
| 5579 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 9873 : Part 3 (2017) |
Safety of toys: Part 3 migration of certain elements (Second Revision) |
Toys and Similar products |
3000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
| 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
3000 |
|
10 % discount for BIS Samples |
|
19 Jul, 2027 |
-
- |
| 5580 |
EMC Testing and Compliance LLP, Gurugram
| 8141526
| IS 10322 : Part 5 : Sec 9 (2017) |
Luminaires: Part 5 particular requirements: Sec 9 rope lights |
Supply voltages not exceeding 250V |
55000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 21.5(Classification of Luminaires') |
- |
2000 |
|
10% Discount for BIS |
| 21.6(Marking) |
- |
2000 |
|
10% Discount for BIS |
| 21.7(Construction) |
- |
20000 |
|
10% Discount for BIS |
| 21.8(Creepage Distance and Clearances) |
- |
5000 |
|
10% Discount for BIS |
| 21.10(Terminals) |
- |
2000 |
|
10% Discount for BIS |
| 21.11(External & Internal Wiring) |
- |
2000 |
|
10% Discount for BIS |
| 21.12(Protection against electric shock) |
- |
5000 |
|
10% Discount for BIS |
| 21.13(Endurance Tests and Thermal Tests) |
- |
15000 |
|
10% Discount for BIS |
| 21.14(Resistance to Dust & Moisture) |
- |
2000 |
|
10% Discount for BIS |
| 21.15(Insulation Resistance and Electric Strength) |
- |
15000 |
|
10% Discount for BIS |
| 21.16(Resistance to Heat , fire and tracking) |
- |
5000 |
|
10% Discount for BIS |
|
19 Jul, 2027 |
-
- |
