BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5311

BUNITECH METALLURGICAL SERVICES PRIVATE LIMITED

7188906

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

{Mild steel bars(Grade I/II), Upto and including 20 mm} & {Medium Tensile Steel Bars,Upto and including 16 mm}

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00
Clause -4, 4.3(TITANIUM)	-	500	-
Clause -4, 4.2(VANADIUM)	-	500	-
Clause -4, 4.1(NIOBIUM)	-	500	-
Clause -4, 4.1(Molybdenum)	-	500	-
Clause -4, 4.1(Chromium)	-	500	-
Clause -4, 4.1(Nickel)	-	500	-
Clause -4, 4.1( ALUMINIUM)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(NITROGEN)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-
Clause -4, 4.1( CARBON)	-	500	-
Clause 5.1(Freedom from Defect)	-	0	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	300	-
Cl 8.2(Bend test)	-	400	-
Clause 8.1(Ultimate Tensile Stress)	-	1000	-
Clause 8.1(Yield Stress)	-	1000	-
Cl. 8.1 Table 1(Elongation)	-	1000	-
Clause 6.1(Size)	-	100	-
7(Tolerance)	-	100	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	200	-
Cl 9.3(Press)	-	0	-
Cl 5.1(Workmanship)	-	0	-
Cl 6.1(Diameter)	-	100	-
Cl 6.2(Weight)	-	300	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1000	-
Cl 9.3(Press)	-	0	-
Cl 5.1(Workmanship)	-	0	-
Cl 6.2(Diameter & Ovality)	-	100	-
Cl 6.2(Weight)	-	300	-
Cl 8(Physical Requirements)	-	1000	-
Cl 9.3(Press)	-	0	-
Cl 9.3(Press)	-	0	-
Cl 8(UTM)	-	0	-
Clause 9.3(Bend test)	-	400	-
Cl 6.2(Weight)	-	300	-
Cl 6.2(Diameter & Ovality)	-	100	-
Cl 5.1(Workmanship)	-	0	-
Cl 5.1(Workmanship)	-	0	-
Cl 6.2(Diameter & Ovality)	-	100	-
Cl 6.2(Weight)	-	300	-
Cl 8(UTM)	-	0	-
Cl 9.3(Press)	-	0	-
Cl 4.1(Workmanship)	-	0	-
Cl 5 & 6(Diameter)	-	100	-
Cl 7(UTM)	-	0	-
Clause 5.1(IS 432 Part 1)	-	100	-
Clause 6.2(IS 1732)	-	100	-
Clause 8.1(IS 1608 Part 1)	-	100	-
Clause 4(Any Instrumental Method/Chemical Method)	-	100	-
Clause 4(By Calculation)	-	0	-
Clause 4(By Calculation)	-	0	-
Clause 4(Any Instrumental Method/Chemical Method)	-	100	-
Clause 6.2(Mass)	-	300	-
Clause 8.1(Ultimate Tensile Stress)	-	1000	-
Clause 4(Boron)	-	500	-
Clause 4(By Calculation)	-	0	-
Clause 4(By Calculation)	-	0	-
Clause 4(Copper)	-	500	-
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	1000	-
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	1000	-
11(Marking)	-	0	-
Clause 5.1(Freedom from Defect)	-	0	-
Clause 4(Boron)	-	500	-
Clause 4(Carbon Equivalent)	-	500	-
Clause 4(Ni+V+Ti)	-	500	-
Clause 4(Copper)	-	500	-
Clause 4(Copper)	-	500	-
Cl. 8.1 Table 1(Yield Stress)	-	1000	-
Clause 8.1(Elongation)	-	1000	-
Clause 6.2(Mass)	-	300	-

24 Oct, 2028

-
-

5312

BUNITECH METALLURGICAL SERVICES PRIVATE LIMITED

7188906

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

Grade(304,302,430) & Thickness-(0.5-4.0 mm)

8500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl . 6 .0(Freedom from defect)	-	500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Tensile Strength, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	1000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	500	-
8.5(Erichsen Cupping Test)	-	500	-
10.1(Thickness, mm)	-	500	-
10.2(width, mm)	-	500	-
10.3(Length, mm)	-	500	-
10.4(Flatness,mm)	-	500	-
10.5(Camber, mm)	-	500	-
11(Surface Finish)	-	100	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
13(Marking)	-	0	-

24 Oct, 2028

-
-

5313

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 7485 : Part 1 (2018)

Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)

8700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	100	NO ANY REAMARK
4, table 2(Material)	-	100	NO ANY REAMARK
4, table 2(General requirements)	-	100	NO ANY REAMARK
4, table 2(Thread)	-	100	NO ANY REAMARK
4, table 2(Mechanical property)	-	100	NO ANY REAMARK
4, table 2(Tolerances)	-	100	NO ANY REAMARK
4, table 2(Cross recess)	-	100	NO ANY REAMARK
4, table 2(Finish - coating)	-	100	NO ANY REAMARK
4, table 2(Surface integrity)	-	100	NO ANY REAMARK
4, table 2(Acceptability)	-	100	NO ANY REAMARK
5(Designation)	-	100	NO ANY REAMARK

20 Aug, 2028

-
Clauses No.5 (head soundness Test, surface Integrity And Finish)

5314

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 7485 : Part 2 (2018)

Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)

ALL

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	100	NO ANY REMARK
4, table 2(Material)	-	100	NO ANY REMARK
4, table 2(Thread)	-	100	NO ANY REMARK
4, table 2(Mechanical property)	-	100	NO ANY REMARK
4, table 2(Tolerances)	-	100	NO ANY REMARK
4, table 2(Cross recess)	-	100	NO ANY REMARK
4, table 2(Finish - coating)	-	100	NO ANY REMARK
4, table 2(Surface integrity)	-	100	NO ANY REMARK
4, table 2(Acceptability)	-	100	NO ANY REMARK
5(Designation)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.5 (head soundness Test, surface Integrity And Finish)

5315

BUNITECH METALLURGICAL SERVICES PRIVATE LIMITED

7188906

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Grade-(1,2,3,4,5,6...10,4M,6M,8M,10M), Diameter-(0.5mm to 40 mm)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5,000/-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 8(Freedom from defects)	-	0	-
Table 1 Note 3(Copper)	-	500	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-
Cl 8(Workmanship)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Silicon %)	-	500	-
6.1( Aluminium %)	-	500	-
Cl. 9(Out of Shape)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Cl 8(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	100	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	-
11(Marking)	-	500	-
9.3(Out of Shape - SOP-MT-23)	-	100	-
9.1(Diameter - SOP-MT-23)	-	200	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	-
Amendment 1(By Calculation)	-	200	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	200	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	200	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	200	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	500	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	200	-
Amendment 1(By Calculation)	-	100	-
Table 1 Note 3(Copper)	-	200	-
Amendment 1(Niobium)	-	500	-
Amendment 1(Vanadium)	-	500	-
Amendment 1(Titanium)	-	500	-

24 Oct, 2028

-
-

5316

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18507 (2024)

Drywall Screws ï¿½ Specification

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 4.0(Thread size.)	-	100	NO ANY REMARK
Clause. 4.0(Length)	-	100	NO ANY REMARK
Clause. 5.0(Material)	-	100	NO ANY REMARK
Clause. 5.0(Cross Recess)	-	100	NO ANY REMARK
Clause. 5.0(Tolerances)	-	100	NO ANY REMARK
Clause. 5.0(Surface Condition)	-	100	NO ANY REMARK
Clause. 5.0(Surface Coating)	-	100	NO ANY REMARK
Clause. 5.0(Acceptability)	-	100	NO ANY REMARK
Clause.6.0(Torque Testing)	-	100	NO ANY REMARK
Clause.7.0(Hardness)	-	100	NO ANY REMARK
Clause.8.0(Designation)	-	100	NO ANY REMARK
Clause.9.0(Marking)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.5 (Core hardness , surface Coting And surface condition)

5317

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

ALL

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 4.0(Thread size.)	-	100	NO ANY REMARK
Clause. 4.0(Length)	-	100	NO ANY REMARK
Clause. 5.0(Material)	-	100	NO ANY REMARK
Clause. 5.0(Cross Recess)	-	100	NO ANY REMARK
Clause. 5.0(Tolerances)	-	100	NO ANY REMARK
Clause. 5.0(Surface Condition)	-	100	NO ANY REMARK
Clause. 5.0(Surface Coating)	-	100	NO ANY REMARK
Clause.6.0(Acceptability)	-	100	NO ANY REMARK
Clause.6.0(Torque Testing)	-	100	NO ANY REMARK
CClause.7.0(Hardness)	-	100	NO ANY REMARK
Clause.8.0(Designation)	-	100	NO ANY REMARK
Clause.9.0(Marking)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.5 (Core hardness , surface Coting And surface condition)

5318

OPTIMAS TESTING SERVICES, OPTIMAS OE SOLUTIONS INDIA PRIVATE LIMITED

7187406

IS 18509 (2024)

Cross-recessed Countersunk Head Wood Screws ï¿½ Specification

ALL

5300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	100	NO ANY REMARK
Clause. 4.0(Thread size.)	-	100	NO ANY REMARK
Clause. 4.0(Length)	-	100	NO ANY REMARK
Clause. 5.0(Material)	-	100	NO ANY REMARK
Clause. 5.0(Thread And Screw ends)	-	100	NO ANY REMARK
Clause. 5.0(Cross Recess)	-	100	NO ANY REMARK
Clause. 5.0(Tolerances)	-	100	NO ANY REMARK
Clause. 5.0(Surface Condition)	-	100	NO ANY REMARK
Clause. 5.0(Surface Coating)	-	100	NO ANY REMARK
Clause. 5.0(Acceptability)	-	100	NO ANY REMARK
Clause.6.0(Torque Testing)	-	100	NO ANY REMARK
Clause.7.0(Hardness)	-	100	NO ANY REMARK
Clause.8.0(Designation)	-	100	NO ANY REMARK
Clause.9.0(Marking)	-	100	NO ANY REMARK

20 Aug, 2028

-
Clauses No.5 (Core hardness , surface Coting And surface condition)

5319

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

ALL

15000 View breakup
-

Clause No.	Exclusion	Remark
8.3(Ideal Heating Test)	-	-
8.2(Leakage Test)	-	-
8.4(Integral Test)	-	-
8.5(Performance Test)	-	-
7.6(Thermal Shock Test for Inner Sealing)	-	-
7.7(Thermal Shock Test for outer Sealing)	-	-
6(GENERAL REQUIREMENTS)	-	-
8.1(Measurement of Storage Water Tank Capacity)	-	-

08 Feb, 2027

-
Included w.e.f 29.04.2025

5320

ACE TEST HOUSE PVT. LTD.

8187926

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

havers, Hair Clippers and Similar Appliances

23450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	-
19.101(Abnormal operation)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
20.2(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	750	-
21.101(Mechanical strength)	-	500	-
21.102(Mechanical strength)	-	500	-
21.103(Mechanical strength)	-	500	-
22(Construction)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	500	-
23(Internal wiring)	-	1000	-
24(Components)	-	500	-
25("Supply connection and external flexible cords")	-	500	-
26("Terminals for external conductors")	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	500	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	500	-
32("Radiation, toxicity and similar hazards")	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-

08 Sep, 2028

-
Exclusion: Cl.24 Components Cl.19.11 and Cl.19.12 as per IS 302 Part1, EMI/EMC Cl.32, Radiation Toxicity and similar Hazards Cl.12, Charging of metal ion batteries Cl.15.2 (degree of protection IP Tests for IPX3, IPX4, IPX5, IPX7)

5321

BUNITECH METALLURGICAL SERVICES PRIVATE LIMITED

7188906

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Grade-(N1,N2,N3,N4,N5,N6,N7), Thickness-0.20 to 4.00 mm

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
9.3, Table 3 (Tensile Strength, Mpa)	-	1000	-
9.3, Table 3 (Yield Strength, Mpa)	-	1000	-
9.3, Table 3 (Elongation, %)	-	1000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	400	-
11(Surface finish)	-	0	-
12(Dimensions)	-	100	-
14.1(Thickness,mm)	-	100	-
14.2( Width, mm)	-	100	-
14.3(Length, mm)	-	100	-
14.4(Flatness, mm)	-	100	-
14.5(Camber, mm)	-	100	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	1000	-
17(Marking)	-	0	-
15(Inspection)	-	0	-
14.5(Camber)	-	100	-
14.4(Flatness)	-	100	-
14.3(Length)	-	100	-
14.2.2(Trimmed Edge)	-	100	-
14.2.1(Mill Edge)	-	0	-
14.1(Thickness)	-	100	-
13(Edge condition)	-	100	-
10(Retests)	-	0	-
9.4(Erichsen cupping test)	-	400	-
9.3(Mechanical properties)	-	1000	-
9.2(Tensile test)	-	1000	-
9.1(Sample plan)	-	0	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	500	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	500	-
7(Heat treatment)	-	0	-
6(Freedom from defects)	-	0	-
17(Marking)	-	0	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	1000	-
4.1(General requirements)	-	0	-
9.3(Tensile Test-1608:Part 1)	-	1000	-
11(Surface finish)	-	0	-
12(Dimensions)	-	100	-

24 Oct, 2028

-
-

5322

Bahadurgarh Footwear Development Services (BFDS), Bahadurgarh

8168806

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

PERSONAL PROTECTIVE EQUIPMENT PART 2 SAFETY FOOTWEAR)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	200	10 % DISSCOUNT FOR BIS SAMPLE.
Cl 5.2.2, Table 4(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	600	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	600	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1500	-
Cl 5.3.2.6(Impact resistance)	-	600	-
Cl 5.3.2.7(Compression resistance)	-	600	-
Cl 5.3.3(Leak proofness)	-	600	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1200	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	600	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	300	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	600	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	2500	-
Cl 5.5.2(Lining- Tear strength)	-	450	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	450	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	500	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	600	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1500	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	600	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	600	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	600	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	600	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	800	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	200	-
Cl 6.2.8.3(Resistance to cutting)	-	800	-
Cl 6.2.9(Scuff cap)	-	200	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	200	-
Cl 5.2(Design)	-	200	-
Cl 5.2.2, Table 4(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1500	-
Cl 5.3.2.6(Impact resistance)	-	600	-
Cl 5.3.2.7(Compression resistance)	-	600	-
Cl 5.3.3(Leak proofness)	-	600	-
Cl 5.3.4("Specific ergonomic features ")	-	600	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1200	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	300	-
Cl 5.3.7(Seam strength)	-	600	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	450	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	450	-
Cl 5.4.5(Flexing resistance)	-	640	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	2500	-
Cl 5.5.2(Lining- Tear strength)	-	450	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	450	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	500	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	600	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1500	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	200	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	500	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	500	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	800	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	800	-
Cl 6.2.7(Ankle protection)	-	800	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	800	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.8.3(Resistance to cutting)	-	800	-
Cl 6.2.9(Scuff cap)	-	500	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1200	-
Cl 6.3(Upper — Water penetration and absorption)	-	500	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	500	-
Cl 5.2(Design)	-	200	-
Cl 5.2.2, Table 4(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	800	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	800	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	800	-
Cl 5.3.2.6(Impact resistance)	-	500	-
Cl 5.3.2.7(Compression resistance)	-	500	-
Cl 5.3.3(Leak proofness)	-	800	-
Cl 5.3.4("Specific ergonomic features ")	-	800	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	600	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	450	-
Cl 5.3.7(Seam strength)	-	600	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	450	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	450	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	600	-
Cl 5.4.5(Flexing resistance)	-	600	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	800	-
Cl 5.5.2(Lining- Tear strength)	-	450	-
Cl 5.5.3(Lining- Abrasion resistance)	-	450	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	450	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	450	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	600	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	500	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	500	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	800	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	800	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.5(Water resistance)	-	600	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	500	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	500	-
Cl 6.2.7(Ankle protection)	-	800	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	600	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.8.3(Resistance to cutting)	-	500	-
Cl 6.2.9(Scuff cap)	-	500	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	600	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	-
Cl 7, Table 20("Marking ")	-	200	-

02 Sep, 2027

-
Included w.e.f 17.06.2025 (For Mechanical parameters only)

5323

ELCA Laboratories, Navi Mumbai

7169736

IS/IEC 60079 : PART 18 (2014)

Explosive atmospheres: Part 18 equipment protection by encapsulation "M" (Second Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1(Weight measurement)	-	12500	per sample
8.1.2(Supply voltage)	-	2500	per sample
8.2.2(Determination of limiting temperature)	-	15000	per sample
8.2.3.1(Thermal conditioning)	-	95000	per sample
8.2.3.2(Thermal conditioning)	-	95000	per sample
8.2.4(Supply voltage)	-	2500	per sample
8.2.5(Apply pull force)	-	3000	per sample
8.2.6(Apply pressure)	-	3000	per sample
8.2.8(Sudden water immersion)	-	5000	per sample
8.2.7(Protective device switching)	-	10000	per sample

02 Feb, 2028

-
-

5324

ELCA Laboratories, Navi Mumbai

7169736

IS/IEC 60079 : Part 1 (2014)

Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.2.2(Determination of explosion pressure (reference pressure))	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
15.2.3.2(Overpressure test – First method (static))	-	3000	per sample
15.3.1(Test for non-transmission of an internal ignition)	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
15.3.2(Electrical equipment of Groups I, IIA and IIB)	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
15.3.3(Electrical equipment of Groups I, IIA and IIB)	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
15.4.2(Tests of ability of the enclosure to withstand pressure)	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
19.3(Observation)	-	125000	Up to 15 lit - 60,000.00 15 to 40 lit - 90,000.00 above 40 lit - 1,25,000.00
19.4(Test of erosion by flame)	-	125000	Up to 15 lit - 60,000.00 15 to 40 lit - 90,000.00 above 40 lit - 1,25,000.00
C.3.1(Observation)	-	25000	up to 2" entry - 15,000.00 2" to 5" entry - 20,000.00 above 5" entry - 25,000.00
C.3.2(Observation)	-	6000	per sample
C.3.3.1(Torque)	-	2000	per sample
C.3.3.2(Pressure)	-	3000	per sample
C.3.4.1(Torque)	-	2000	per sample
C.3.4.2(Observation)	-	3000	per sample
C.3.4.3(Pressure)	-	3000	per sample
15.2.2(Pressure)	-	75000	For enclosure:Up to 5 lit-25,000/-, 5to15 lit-30,000/-,15to50 lit- 50,000/-, 50-100 Lit -65000/-,Above 100 lit - on request Rotating Electrical Machines: up to 112 frames size-28500, from 112 to 280 frame 38500/-, frame size 280 and above -75000.00/-.
15.4(Tests of flameproof enclosures with breathing and draining devices)	-	85000	per sample
B.1, B.2 & B.3(Observation)	-	9000	Per sample
5(Flameproof joints)	-	5000	Per sample

02 Feb, 2028

-
-

5325

ELCA Laboratories, Navi Mumbai

7169736

IS/IEC 60079 : PART 0 (2017)

Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )

201000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26.4.2(Observation)	-	3000	per sample
26.4.3(Observation)	-	1500	per sample
26.4.5(Observation)	-	12500	Up to 10 lit 7000.00 10 to 20 lit 9000.00 above 20 lit 12,500.00
26.5.1(Voltage, Current, Power, Torque, Speed, Temperature)	-	15000	Clause 26.5.1 Thermal Test Clause no 26.5.1.2 Service Temperature=7500.00 Clause no 26.5.1.3 Maximum Surface Temperature=7500.00.
26.5.2(Observation)	-	2500.00	per sample
26.6(Torque)	-	2000	per sample
26.8(Temperature)	-	95000	per sample
26.9(Temperature)	-	95000	per sample
26.12(Resistance)	-	25000	per sample
26.13(Insulation resitance)	-	15000	per sample
26.14(Capacitance)	-	2500	per sample
26.15(Power, Current, Speed)	-	15000	per sample
26.16(Dimension)	-	25000	per sample
A.3.1, A.3.2(Observation)	-	6000	per sample
A.3.3(Observation)	-	3000	per sample
A.3.4(Observation)	-	12500	per sample

02 Feb, 2028

-
-

5326

ELECTRONICS TEST AND DEVELOPMENT CENTRE - ETDC (STQC), BANGALURU (SAFETY LAB))

6117624

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	6000	Parameter Charges
1.6(Power interface .)	-	3000	Parameter Charges
1.7(Markings and instructions)	-	6000	Parameter Charges
2.1(Protection from electric shock and energy hazards)	-	30000	Parameter Charges
2.2(SELV circuits)	-	9000	Parameter Charges
2.3(TNV circuits)	-	12000	Parameter Charges
2.4(Limited current circuits)	-	3000	Parameter Charges
2.5(Limited power sources .)	-	3000	Parameter Charges
2.6(Provisions for earthing and bonding)	-	6000	Parameter Charges
2.7(Overcurrent and earth fault protection in primary circuits)	-	6000	Parameter Charges
2.8(Safety interlocks)	-	6000	Parameter Charges
2.9(Electrical insulation)	-	34000	Parameter Charges
2.10(Clearances, creepage distances and distances through insulation)	-	49000	Parameter Charges
3.1(General)	-	20500	Parameter Charges
3.2(Connection to a mains supply)	-	15000	Parameter Charges
3.3(Wiring terminals for connection of external conductors)	-	14500	Parameter Charges
3.4(Disconnection from the mains supply)	-	3000	Parameter Charges
3.5(Interconnection of equipment)	-	3000	Parameter Charges
4.1(Stability)	-	3000	Parameter Charges
4.2(Mechanical strength)	-	24500	Parameter Charges
4.3(Design and construction)	-	18000	Parameter Charges
4.4(Protection against hazardous moving parts)	-	6000	Parameter Charges
4.5(Thermal requirements)	-	16300	Parameter Charges
4.6(Openings in enclosures)	-	6000	Parameter Charges
4.7(Resistance to fire)	-	18000	Parameter Charges
5.1(Touch current and protective conductor curren)	-	6000	Parameter Charges
5.2(Electric strength)	-	3000	Parameter Charges
5.3(Abnormal operating and fault conditions)	-	29500	Parameter Charges
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	Parameter Charges
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	Parameter Charges
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	6000	Parameter Charges
2.8.2/2.8.5(Interlock switches)	-	0	Parameter Charges
2.8.7(Switches and Relay)	-	0	Parameter Charges
2.10.4.2(Material Group and Comparative Tracking Index)	-	8000	Parameter Charges
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	Parameter Charges
2.10.5.4(Opto-coupler)	-	0	Parameter Charges
2.10.5.11(SMPS Transformer and Inductor)	-	3000	Parameter Charges
2.10.5.12(Wires in wound components)	-	0	Parameter Charges
2.10.5.13(Winding wire)	-	0	Parameter Charges
2.10.6(PCB material)	-	0	Parameter Charges
2.10.8.2(Thermal conditioning (thermal ageing))	-	37000	Parameter Charges
2.10.8.4(Abrasion resistance test)	-	3000	Parameter Charges
3.1.4(Internal wire)	-	3000	Parameter Charges
3.2.4(Appliance inlet /connector)	-	3000	Parameter Charges
4.3.8(Batteries)	-	0	Parameter Charges
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	0	Parameter Charges
4.3.13.5(LED, laser class)	-	0	Parameter Charges
Annex Q(Voltage Dependent Resistors)	-	0	Parameter Charges
Annex B(Motor tests under abnormal conditions)	-	11500	Parameter Charges
Annex C(Transformers)	-	6000	Parameter Charges
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	3000	Parameter Charges

31 Dec, 2026

-
-

5327

ELECTRONICS TEST AND DEVELOPMENT CENTRE - ETDC (STQC), BANGALURU (SAFETY LAB))

6117624

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	Classification of Equipment only
7(Marking and instructions)	-	3000	Test Parameter
8(Protection against live parts)	-	9000	Test Parameters
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	statement/ observation only
10(POWER INPUT AND CURRENT)	-	3000	Test Parameter
11(HEATING)	-	26000	Test Parameters
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	6000	Test Parameters
15(HUMIDITY TREATMENT TEST)	-	15500	Test Parameters
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	6000	Test Parameters
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	6000	Test Parameters
18(ENDURANCE)	-	72000	Test Parameter
19(ABNORMAL OPERATION)	-	48500	Test Parameters
20(STABILITY AND MECHANICAL HAZARDS)	-	9000	Test Parameters
21(MECHANICAL STRENGTH)	-	15000	Test Parameters
22(CONSTRUCTION)	-	26000	Test Parameters
23(INTERNAL WIRING)	-	13500	Test Parameters
24(COMPONENTS)	-	3000	Test Parameters
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	15000	Test Parameters
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	6000	Test Parameters
27(PROVISION FOR EARTHING)	-	3000	Test Parameter
28(SCREWS AND CONNECTIONS)	-	3000	Test Parameter
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	20000	Test Parameters
30(RESISTANCE TO HEAT AND FIRE)	-	17800	Test Parameters
31(RESISTANCE TO RUSTING)	-	3000	Test Parameter
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3000	Test Parameter

31 Dec, 2026

-
Exclusion: Cl-19.11.4.2 (Radiated Fields), Cl-19.11.4.4 (Surge Immunity test)

5328

ELECTRONICS TEST AND DEVELOPMENT CENTRE - ETDC (STQC), BANGALURU (SAFETY LAB))

6117624

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	Parameter charges
6(Hazardous radiations)	-	3000	Parameter charges
7(Heating under normal operating conditions)	-	11500	Parameter charges
8(Constructional requirements with regard to the protection against electric shock)	-	282500	Parameter charges for total clause.
9(Electric shock hazard under normal operating conditions)	-	19500	Parameter charges
10(Insulation requirements)	-	36000	Parameter charges
11(Fault conditions)	-	29500	Parameter charges
12(Mechanical strength)	-	78100	Parameter charges
13(CLEARANCES and CREEPAGE DISTANCES)	-	12000	Parameter charges
14(Components)	-	3000	Parameter charges
15(TERMINALS)	-	20300	Parameter charges
16(External flexible cords)	-	15000	Parameter charges
17(Electrical connections and mechanical fixings)	-	6000	Parameter charges
19(Stability and mechanical hazards)	-	19800	Parameter charges
20(Resistance to fire)	-	18000	Parameter charges
6.1(Ionizing radiation)	-	3000	Parameter charges
6.2(Laser Radiation)	-	0	Document verification
6.3()	-	0	Document Verification
16.3b(Cord Bending Test)	-	15000	Parameter charges
20.2.4(Printed Boards)	-	0	Document verification

31 Dec, 2026

-
-

5329

BIS, Patna Branch Laboratory (PBL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.2 (Adhesive)	-
Cl-6.1 (Dimensions (length))	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (i) b ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-9.3 (Moisture Content)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-6.1 (Dimensions (length))	-
Cl-8.3 (Edge Straightness)	-
Cl-6.1 (Dimensions (width))	-
Cl-6.3 (Squareness)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (ii) a ((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (ii) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-

-
-

5330

BIS, Patna Branch Laboratory (PBL)

None

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2 (Adhesives for Bonding of Veneers)	-
Cl-7.1 (Dimensions -length)	-
Cl-10.3 (Moisture Content)	-
Cl-10.4.1 (Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-
Cl-10.4.2 (Glue Adhesion in Dry State - Adhesion of Plies)	-
Cl-10.5, 10.5.1 (Resistance to water test- glue shear strength- WOOD Failure, Average)	-
Cl-10.7.1, Table-2 (Mycological Test- Glue shear strengt)	-
Cl-10.8 (Tensile Strength)	-
Cl-10.11 (Retention of Preservative)	-
Cl-10.12 (Formaldehyde Content Test)	-
Cl-7.2 (Thickness)	-
Cl-7.3 (Squareness)	-
Cl-8.1, 8.2 (Workmanship and finish)	-
Cl-10.5.1.1 (Water Resistance Test-Glue shear strength)	-
Cl-10.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-10.6 (Water resistance test (Concrete shuttering Plywood))	-
Cl-10.7.2 (Mycological Test- Adhesion of plies)	-
Cl-10.9, Table-3 (i) (Along (parallel to the grain direction of the face veneer))	-
Cl-10.9, Table-3 (ii) (Across (perpendicular to the grain direction of the face veneer))	-
Cl-10.10, Table-4 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-10.10, Table-4 (i) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-7.1 (Dimensions (width))	-
Cl-7.1 (Dimensions -length)	-
Cl-7.3 (Edge Straightness)	-
Cl-7.3 (Squareness)	-

-
-

5331

BIS, Patna Branch Laboratory (PBL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
Electricity Cost (per kWh) ₹ 9.00 Testing Charges per man hour ₹ 300.00 Total testing charge for BWP Grade ₹ 7,456.00 ₹ 7,450.00 Total testing charge for BWR Grade ₹ 7,108.00 ₹ 7,100.00 Total testing charge for MR Grade ₹ 7,090.00 ₹ 7,100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
-

5332

BIS, Patna Branch Laboratory (PBL)

None

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 ( Density, g/cc)	-
7.3 ( Opacity)	-
8.1.1, 8.1.1.2, table-3 (Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-
8.1.2, table 4 to 7 (Wall Thickness)	-
8.1.3 (Length, meter)	-
8.2 table-9 (Dimensions of Integral Socket)	-
9 /9.1 / 27 degree centigrate (MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-
9.3 table-12 ( Ring Stiffness)	-
9.4, annexure-E ( Orientation Factor)	-
10, table-13 ( PHYSICAL AND 1CHARACTERISTICS)	-
11.2 / 11.2.1 ( Short-Term Pressure Test for Leak Tightness of Assemblies)	-
11.3 ( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-
9.2, table -11 ( Resistance to External Blows at 0 °C)	-

-
-

5333

BIS, Patna Branch Laboratory (PBL)

None

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.5 (Density)	-
Cl 9.6 (Melt Flow Rate)	-
Cl 7 (Dimensions Of Pipes)	-
Cl 9.1 (Hydraulic Characteristics)	-
Cl 9.2 (Fusion Compatibility)	-
Cl 9.3 (Reversion Test )	-
Cl 9.4 & Annex B (Impact Strength)	-
Cl 9.7 (Carbon Black Content & Dispersion)	-
Cl 9.8 (Thermal Stability By Hydrostatic Pressure Testing)	-
Cl 9.9 (Opacity)	-

-
-

5334

BIS, Patna Branch Laboratory (PBL)

None

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Dimensions of fitting)	-
8.2 (Opacity)	-
8.3 (Stress Relief Test)	-
8.4 (Vicat softening Temperature)	-
8.5 (Density)	-
Cl-9.1 (Hydrostatic Characteristics)	-
Cl-9.2 (Thermal Stability by Hydrostatic Pressure Testing)	-

-
-

5335

BIS, Patna Branch Laboratory (PBL)

None

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

Total Testing Charges : Rs. 9970.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
19 (Marking)	-
7.2 ,Table 2&3 (Socket Dimensions)	-
8 (Sealing Rings)	-
11 (Design requirements)	-
12.2 (Stress relief test)	-
12.3 (Vicat softening tempewrature)	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-
Cl.14, Annex A (Titanium Di-Oxide Content)	-
Cl.15, Annex B (Sulphated Ash Content)	-
16.1 (Impact test)	-
12.4 (Effect on water test)	-
17 (Watet tightness of joint)	-
7.1,Table 1 (Wall thickness)	-

-
-

5336

BIS, Patna Branch Laboratory (PBL)

None

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1.1, T4 (Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-
8.3 (Carbon black content- IS 2530-1963)	-
8.2 ("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-
8.4 (Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-
8.5 (Oxidation Induction Time -IS 4984:2016(Annexure-B))	-
8.6 (Density-IS 7328:2020)	-
8.7 ("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-
8.8,T5 ("Elongation -IS 4984-2016 (Annexure-H)")	-
8.9 (Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-
6 (Pipe Description - IS 14333-2022)	-
6.2 (Colour- IS 14333-2022)	-
7.1 (Visual Appearance- IS 14333-2022)	-
7.2 (Length- IS 14333-2022)	-
7.3 (Coiling- IS 14333-2022)	-
7.4,T3 of IS 4984 (Outside Diameter-IS 4984-2016)	-
7.4,T4 of IS 4984 (wall Thickness-IS 4984-2016)	-
7.4,T3 of IS 4984 (Ovality-IS 4984-2016)	-

-
-

5337

Dashmesh Test Lab Private Limited

8186926

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	500	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl.17(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15(Verification)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	1000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-35(Endurance)	-	500	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	2000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	1500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	300	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	200	-
Cl. 6 IS 302-2-35(Classification)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-

22 Jul, 2028

-
Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC Tests), Cl 15 (Degree of protection IP Tests for IPX3, IPX4, IPX5, IPX6, IPX7)

5338

DELHI TEST HOUSE, Azadhpur

8131406

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1(Febric)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.1.1(Febric)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.2(Seam)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.3(Hemming at the mouth)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.4(Freedom from defects)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.1(Febric)	-	-	-
As per Clause 4.1.1(Febric)	-	-	-
As per Clause 4.2(Seam)	-	-	-
As per Clause 4.3(Hemming at the mouth)	-	-	-
As per Clause 4.4(Freedom from defects)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	-	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	-	-

17 Jun, 2027

-
Included w.e.f 16.04.2025

5339

BLUESKY LAB LLP, GHAZIABAD

8170306

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	800	-
30.0(Resistance To Heat and Fire)	-	800	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
11.0(Heating)	-	2000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1500	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19.11.4.4(Surge immunity test)	-	2000	-
4(GENERAL REQUIREMENT)	-	800	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	800	-
19.11.4.4(Surge immunity test)	-	800	-

22 May, 2028

-
Included w.e.f 13.05.2025 Exclusion: Cl 19.11.4.19.11.4.7(EMI/EMC), Cl 24.0 (Components), Cl 32.0 (Radiation, Toxicity and Similar Hazards)

5340

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

Upto 20A, Upto 250V

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-5(General notes on tests)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-6(Rating)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-8(Marking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-9(Checking of dimensions)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.3(Requirements for Accessible Metal Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.4(Requirements for Insulation of the Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-7(Classification)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.6(Requirements for Switches Operated Indirectly)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-11(Provision for earthing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-12(Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-13(Constructional requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-14(Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.1(Resistance to Ageing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.2(Protection Provided by Enclosures of Switches)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.3(Resistance to Humidity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.1(General)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.2(Test for Measuring the Insulation Resistance)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.3(Electric Strength Test)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-17(Temperature rise)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-18(Making and breaking capacity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-19(Normal operation)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-20(Mechanical strength)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-21(Resistance to heat)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-22(Screws, current carrying parts and connections)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.1(Resistance to abnormal heat and fire)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.2(Resistance to tracking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-25(Resistance to rusting)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.1(Test for Switches Intended for Inductive Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
13.5(Attachment of knobs)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.12(Table 13)(Deflection Test Forces)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-4(General Requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-5(General notes on tests)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-6(Rating)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-8(Marking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-9(Checking of dimensions)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.3(Requirements for Accessible Metal Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.4(Requirements for Insulation of the Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-7(Classification)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.6(Requirements for Switches Operated Indirectly)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-11(Provision for earthing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-12(Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-13(Constructional requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-14(Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.1(Resistance to Ageing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.2(Protection Provided by Enclosures of Switches)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.3(Resistance to Humidity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.1(General)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.2(Test for Measuring the Insulation Resistance)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.3(Electric Strength Test)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-17(Temperature rise)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-18(Making and breaking capacity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-19(Normal operation)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-20(Mechanical strength)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-21(Resistance to heat)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-22(Screws, current carrying parts and connections)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.1(Resistance to abnormal heat and fire)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.2(Resistance to tracking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-25(Resistance to rusting)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.1(Test for Switches Intended for Inductive Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
13.5(Attachment of knobs)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.12(Table 13)(Deflection Test Forces)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A

-
Included w.e.f 07.05.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number