BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15633 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5971

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades as per IS

21050.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.3(Load In One Direction)	-	1000.00	For Physical testing with Pull Out test Rs 13600.00, Without Pull Out Rs 6500.00, For Chemical Testing Rs 5950.00 with Nitrogen, Without Nitrogen Rs 2950.00 For Chemical Elemental Analysis by Optical Emission Spectrometer Rs 1500.00
Cl 9.4(Load In Other Direction From Bend)	-	1000.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl 8.1(UTM)	-	0	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl 7.2(Weight)	-	0	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl 6.1(Length, Width & Thickness)	-	600.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl 5(Deformations and Surface Characteristics)	-	6500.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Sulphur and phosphorous)	-	350.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1( Nitrogen%)	-	3000.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Ni)	-	300.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Mo)	-	300.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Cr)	-	300.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(V)	-	300.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1( Copper %)	-	300.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Sulphur %)	-	350.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Phosphorus %)	-	400.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Manganese %)	-	350.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(Carbon %)	-	350.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 9.3, Table 4(Bend Test )	-	1000.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 8.1 Table 3(Elongation, percentage)	-	600.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 8.1 Table 3(TS/YS ratio)	-	500.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 8.1 Table 3(Yield Stress (YS))	-	500.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 7.2 Table -2 (Nominal Mass)	-	800.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 6.1(Nominal Size)	-	600.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	600.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	600.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
4.1(CE)	-	1500.00	G S T 18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order Note: Carbon Equivalent by Optical Emission Spectrometer

30 Sep, 2027

-
-

5972

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Calcined Clay Based

9300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	300.00	For Physical and Chemical Tests Rs 9300.00, Compressive Strength for 168 Hrs and 672 Hrs Rs 1600.00 extra
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	0	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- i(Fineness 4031 Part 2)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3500.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1500	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	GST @ 18% extra as applicable presently any change by Govt either increase or decrease will be applicable extra at the time of placement of order

30 Sep, 2027

-
-

5973

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

10900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3500	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- i(Fineness 4031 Part 2)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	0	G S T @ 18% extra as applicable at present
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	0	G S T @ 18% extra as applicable at present
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	0	0
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	0	0
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1500	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	0	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300.00	G S T @ 18% extra as applicable at presently any change in GST by Govt either increase or decrtease will be charged extra at the time of placment of order

30 Sep, 2027

-
-

5974

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP-DEC, BWP-COM, MR-DEC, MR-COM

16228 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	2000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	2000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	2000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	2000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2500	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.3(Adhesion of Plies - Annexure H)	-	800	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1500	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1500	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Squareness - Annexure D)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Thickness - Annexure E)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Width - 8.1.4)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
7.3(Dimensional Requirements - Length - 8.1.4)	-	1000	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	600	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	600.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
9.2.6(Spot test - Annexure L)	-	900.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order

30 Sep, 2027

-
-

5975

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

15 NB to 350 NB

9300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	For Physical Testing Rs 4700.00, For Chemical testing Rs 4600.00 with Nitrogen, Withouit Nitrogen Rs 1600.00, For Elemental Anaylsis by Optical Emmission Spectrometer Rs 1500.00
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3700.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	800.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	800.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
5 AND AS PER IS 10748(COPPER)	-	500.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
5 AND AS PER IS 10748(MICRO ALLOY)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	1500.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
5 AND AS PER IS 10748(CARBON)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3( ALUMINIUM)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3(SILICON)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3(NITROGEN)	-	3000.00	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3(MANGANESE)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3(PHOSPHURS)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3(SULPHUR)	-	0	GST @ 18% will be charged extra as applicable presently any change in GST by Govt either increase or decrease will bve charged extra at the time of placement of order
Clause - 5.1, Table-3( CARBON)	-	0	GST @ 18% extra as applicable presently any change by Govt in taxes etc will be charged extra

30 Sep, 2027

-
Scope restricted to 15 NB to 350 NB, Upto 25 mm nominal size and above 50 mm nominal size only

5976

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Welded Tubes and Pipes

7950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Press)	-	1000.00	For Physical Testing Rs 3100.00, For Chemical Testing Rs 3350.00, Elemental Analysis by IOptical Emission Spectrometr Rs 1500.00
Cl 12 & 13(Length, Width & Thickness)	-	600.00	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
Cl 8 & Table 3(UTM)	-	1500.00	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
7.1(Carbon %)	-	350.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Manganese %)	-	350.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Phosphorus %)	-	400.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Sulphur %)	-	350.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Silicon %)	-	400.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Copper %)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Aluminium %)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Nb)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(V)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Ti)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Cr)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Mo)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1(Ni)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Nitrogen%)	-	3000.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra for Nitrogen Rs 2800.00 Extra
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	100.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	200.00	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra For Nitrogen Rs 2800.00 extra
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra
7.1( Copper %)	-	0	GST@18% extra as applicable presently any change by Govt in taxes etc will be charged extra

30 Sep, 2027

-
-

5977

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 303 (1989)

Plywood for General Purposes -

BWR & MR/AA, AB, BB/Decorative and Commercial

29100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	For Physical and Chemical Testing complete testing charges Rs 29100.00
8(Dimensions & Tolerances - Width - Cl. 8)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Squareness - Annexure C)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	800	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2500	GST @ 18% extra as applicable at present
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.3(Moisture Content - Part 1 of IS 1734)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1500.00	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1500	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2000	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	600	GST@18% extra as applicable presently any change by Govt either increase or decrease will be charged extra at the time of placement of order

30 Sep, 2027

-
-

5978

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33, 43, 43-S ,53-S

17100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 i.(Fineness)	-	300.00	For Physical Testing Rs 4000.00 For Chemical Testing Rs 3300.00 For Transverse Strength Rs 1500.00
7 Table-3 ii a(Expansion by Le Chatelier)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 ii b(Expansion by Autoclave)	-	500.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iii a(Setting Time Initial)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iii b(Setting Time Final)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	800.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	0	GST @ 18% extra as applicable presently
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	0	GST @ 18% extra as applicable presently
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 viii(Alkali content)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 vii(Chloride content)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 vi(Loss on ignition)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 iv(Magnesia)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 iii.(Insoluble residue)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	300.00	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
6.1 Table-2 viii(Alkali content)	-	0	GST @ 18% extra as applicable presently
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	300.00	GST @ 18% extra as applicable presently
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1500	GST @ 18% extra as applicable presently any change by the Govt either increase or decrease in GST will be applicable at the time of placement of order
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	-

30 Sep, 2027

-
-

5979

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 16240 (2023)

REVERSE OSMOSIS RO BASED POINT-OF-USE POU WATER TREATMENT SYSTEM FOR DRINKING PURPOSES SPECIFICATION first revision

all

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Overall migration limits)	-	65000	-
Cl-6.3.1(TDS Reduction)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-i(Arsenic)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ii(Cadmium)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iii(Chromium)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-iv(Copper)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-v(Fluoride)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vi(Lead)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-vii(Mercury)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-viii(Nitrate)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-ix(Pesticides total)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-x(E. coli)	-	65000	-
Cl-6.3.2.1, 6.3.3.1 and B-1.2,Table 1, sl.no-xi(MS-2 Coliphage (Virus))	-	65000	-
Cl-6.3.3.2.1,Table 2,sl.no-i(Cryptosporidium parvum)	-	40000	-
Cl-6.3.3.2.1,Table 2,sl.no-ii(Giardia lamblia)	-	40000	-
Cl-6.4(Percent Recovery of Product Water and Hourly Production Rate)	-	65000	-
Cl-6.5.1(Excessive Leakage Current)	-	65000	-
Cl-6.5.2(High Voltage Test)	-	65000	-
Cl-6.5.3(Provision For Earthing)	-	65000	-
Cl-6.6(Power supply)	-	65000	-
Cl-6.7(Pressure Test (Hydrostatic Test) — Type Test)	-	65000	-
Cl-6.8.1(Routine Pressure Test (Pneumatic Test))	-	65000	-
Cl-6.8.2(Full Device Leakage Testing)	-	65000	-

08 May, 2028

-
Included w.e.f 17.06.2025

5980

Robust Testing Solutions Private Limited, Alwar

8173526

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	12500	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	10000	-
19.1 b) IV)(Hot set test)	-	6500	-
19.1 b) V)(Shrinkage test)	-	3500	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3500	-
20.6(Tests for armouring material : Dimensions)	-	3500	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5500	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2500	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3500	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	30000	-
20.9.1(Thermal ageing on complete cable sample)	-	12000	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	7000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	0	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	4000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	4000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	20000	-
20.18(Measurement of Capacitance)	-	20000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	60000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	15000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	15000	-
20.11.1(Bending test followed by P D test)	-	60000	-
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	10000	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	10000	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	10000	-
19.1 A) II)(Tests on conductor : Resistance test)	-	10000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	15000	-
19.1 b) II)(Tensile strength and elongation at break)	-	15000	-
19.1 b) III)(Thermal ageing in air oven)	-	25000	-
19.1 b) IV)(Hot set test)	-	15000	-
19.1 b) V)(Shrinkage test)	-	25000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	5000	-
20.6(Tests for armouring material : Dimensions)	-	5000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	5000	-
Table 9, (Measurement of thickness)	-	5000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	15000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	15000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	15000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	25000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	15000	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	15000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	15000	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	15000	-
20.8.3(Water tightness test)	-	35000	-
20.9.1(Thermal ageing on complete cable sample)	-	25000	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	15000	-
20.2(Resistivity test for semi-conducting layer)	-	5000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	5000	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	15000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	15000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	15000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	25000	-
20.18(Measurement of Capacitance)	-	25000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	70000	-
20.14.1(Load cycle test followed by P.D measurement)	-	60000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	50000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	50000	-
20.11.1(Bending test followed by P D test)	-	70000	-
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	15000	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	10000	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	15000	-
19.1 A) II)(Tests on conductor : Resistance test)	-	15000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	15000	-
19.1 b) II)(Tensile strength and elongation at break)	-	10000	-
19.1 b) III)(Thermal ageing in air oven)	-	25000	-
19.1 b) IV)(Hot set test)	-	15000	-
19.1 b) V)(Shrinkage test)	-	25000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	15000	-
20.4(Test for concentric copper tape)	-	15000	-
20.5(Thickness of metallic sheath)	-	15000	-
20.6(Tests for armouring material : Dimensions)	-	15000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	15000	-
Table 9, (Measurement of thickness)	-	15000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	10000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	15000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	15000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	25000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	15000	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	10000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	10000	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	25000	-
20.8.3(Water tightness test)	-	50000	-
20.9.1(Thermal ageing on complete cable sample)	-	25000	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	10000	-
20.2(Resistivity test for semi-conducting layer)	-	5000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	15000	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	15000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	15000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	15000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	35000	-
20.18(Measurement of Capacitance)	-	25000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	75000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	50000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	50000	-
20.11.1(Bending test followed by P D test)	-	70000	-

02 Aug, 2029

-
Included w.e.f 17.06.2025 Upto 66kV

5981

TECHNOPOWER TECH SOLUTIONS LLP

8187126

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Outdoor Type, Oil Immersed, Distribution Transformers Up to and Including 315 KVA, 11/0.433 KV.

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	1000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1000	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5000	-
21.2 d)(Measurement of no-load loss and current)	-	2000	-
21.2 e)(Measurement of insulation resistance)	-	1000	-
21.2 f)(Induced over-voltage withstand test)	-	2000	-
21.2 g)( Separate-source voltage withstand test)	-	3000	-
21.5.2.3( Oil leakage test (routine test))	-	1000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	3000	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	1000	-
10(Terminal arrangment )	-	500	-
11(Minimum clearance in Air)	-	500	-
21.4 c(No load current at 112.5 percent voltage.)	-	2000	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	1000	-
13.1(Marking (Rating Plates))	-	500	-
13.2(Terminal Marking Plate)	-	500	-
13.3(Marking )	-	500	-
13.4(Marking)	-	500	-
13.4.1(Marking)	-	500	-
14.1(MOUNTING ARRANGEMENT)	-	700	-
14.2(MOUNTING ARRANGEMENT)	-	700	-
14.3(MOUNTING ARRANGEMENT)	-	700	-
14.4(MOUNTING ARRANGEMENT)	-	700	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	3000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	2000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	1000	-
21.5.3.3(Oil leakage test (routine test))	-	1000	-
16(Conservator for Non-sealed type Transformers)	-	500	-
20(Fittings)	-	1000	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	5000	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	5000	-
10(Terminal Arrangement)	-	700	-
15.2(Pressure and Vacuum Requirements)	-	1000	-
19(Tolerances)	-	500	-
18(Efficiency and regulation)	-	1000	-
21(General )	-	3000	-
5(General )	-	3000	-
6.1(Rating)	-	5000	-
6.2(Rated frequency)	-	1000	-
6.3(Nominal system voltage)	-	1000	-
6.4(Basic Insulation level )	-	2500	-
6.5(No-Load Voltage Ratios)	-	1000	-
6.6(Winding connections and phase displacement)	-	1000	-
6.7(Tapping Range and Tapping Method)	-	2000	-
6.8(Losses and impedance values)	-	5000	-
6.9(Permissible Flux Density and Over Fluxing )	-	2000	-
11(Minimum Clearnaces air )	-	500	-
13(Marking )	-	500	-
14(Mounting arrangement)	-	500	-
16(Conservator for Non-Sealed type Transformers)	-	500	-
18(Efficiency and Regulation)	-	1000	-
19(Tolerances)	-	2000	-
20(Fittings)	-	3000	-
15.4(Gasket)	-	1000	-
15.1.1(TRANSFORMER TANK : Construction)	-	250	-
15.1.2(TRANSFORMER TANK : Construction)	-	250	-
15.1.3(TRANSFORMER TANK : Construction)	-	250	-
15.1.4(TRANSFORMER TANK : Construction)	-	250	-
15.1.5(TRANSFORMER TANK : Construction)	-	250	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	500	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	500	-
15(Trasnformer Tank )	-	250	-
21.5.3.3(Oil leakage test)	-	500	-

07 Aug, 2028

-
Exclusion: 21.3(a )-Lightning impulse test, 21.3(b)- Temperature rise test ,21.3(c)-Short-circuit withstand test, 21.4-special test, 9-Material testing.

5982

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13382 (2018)

Cast iron specials for mechanical and push-on flexible joints for pressure pipes for water, gas and sewage - Specification (Second Revision)

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Thickness Wall, mm )	-	18900	For complete testing
7(Joints)	-	18900	For complete testing
7.1(Type of Joints)	-	18900	For complete testing
7.2(Push on joints)	-	18900	For complete testing
7.3(Flange and mechanical joints)	-	18900	For complete testing
7.4(Bolt and hole circle)	-	18900	For complete testing
7.5(Flanges)	-	18900	For complete testing
7.6(Flanges)	-	18900	For complete testing
8(Rubber gaskets)	-	18900	For complete testing
8.2(Dimenmsions of Rubber gaskets)	-	18900	For complete testing
10(Mechanical Test)	-	18900	For complete testing
10.1(Tensile Stregth, Mpa)	-	18900	For complete testing
10.2(Hardness, HBW)	-	18900	For complete testing
11(Hydrostatic test)	-	18900	For complete testing
11.2(Withstand Hydrostatic Pressure)	-	18900	For complete testing
12(Sizes)	-	18900	For complete testing
12.2(Dimensions, mm)	-	18900	For complete testing
12.2(e)	-	18900	For complete testing
12.2(R)	-	18900	For complete testing
12.2(L)	-	18900	For complete testing
12.2(Socket)	-	18900	For complete testing
12.2(D)	-	18900	For complete testing
12.2(Cylinder Pipe)	-	18900	For complete testing
12.2(b)	-	18900	For complete testing
12.2(D1)	-	18900	For complete testing
12.2(W)	-	18900	For complete testing
12.2(P)	-	18900	For complete testing
12.2(X)	-	18900	For complete testing
12.2(Y)	-	18900	For complete testing
12.2(Z)	-	18900	For complete testing
12.2(S)	-	18900	For complete testing
12.2(Follower Gland)	-	18900	For complete testing
12.2(D)	-	18900	For complete testing
12.2(C )	-	18900	For complete testing
12.2(E)	-	18900	For complete testing
12.2(F)	-	18900	For complete testing
12.2(Hole Dia)	-	18900	For complete testing
12.2(N)	-	18900	For complete testing
12.2(M)	-	18900	For complete testing
12.2(A)	-	18900	For complete testing
12.2(Dia of Bolt)	-	18900	For complete testing
12.2(L)	-	18900	For complete testing
12.2(No of Bolt)	-	18900	For complete testing
12.2(Rubber Gasket )	-	18900	For complete testing
12.2(N)	-	18900	For complete testing
12.2(Q)	-	18900	For complete testing
12.2(R)	-	18900	For complete testing
12.2(T)	-	18900	For complete testing
12.2(U)	-	18900	For complete testing
12.2(V)	-	18900	For complete testing
14(Coating Test at 0 and 65 Degree Centegrade)	-	18900	For complete testing
15(Internal Lining)	-	18900	For complete testing
15.1(Cement mortor lining)	-	18900	For complete testing
17.2(Flexible Joints)	-	18900	For complete testing
18.1(Positive internal hydrostatic pressure)	-	18900	For complete testing
18.3(Stregth and Leak tightness test for flanged joints)	-	18900	For complete testing
6(Thickness Wall, mm )	-	18900	For complete testing
7(Joints)	-	18900	For complete testing
7.1(Type of Joints)	-	18900	For complete testing
7.2(Push on joints)	-	18900	For complete testing
7.3(Flange and mechanical joints)	-	18900	For complete testing
7.4(Bolt and hole circle)	-	18900	For complete testing
7.5(Flanges)	-	18900	For complete testing
7.6(Flanges)	-	18900	For complete testing
8(Rubber gaskets)	-	18900	For complete testing
8.2(Dimenmsions of Rubber gaskets)	-	18900	For complete testing
10(Mechanical Test)	-	18900	For complete testing
10.1(Tensile Stregth, Mpa)	-	18900	For complete testing
10.2(Hardness, HBW)	-	18900	For complete testing
11(Hydrostatic test)	-	18900	For complete testing
11.2(Withstand Hydrostatic Pressure)	-	18900	For complete testing
12(Sizes)	-	18900	For complete testing
12.2(Dimensions, mm)	-	18900	For complete testing
12.2(e)	-	18900	For complete testing
12.2(R)	-	18900	For complete testing
12.2(L)	-	18900	For complete testing
12.2(Socket)	-	18900	For complete testing
12.2(D)	-	18900	For complete testing
12.2(Cylinder Pipe)	-	18900	For complete testing
12.2(b)	-	18900	For complete testing
12.2(D1)	-	18900	For complete testing
12.2(W)	-	18900	For complete testing
12.2(P)	-	18900	For complete testing
12.2(X)	-	18900	For complete testing
12.2(Y)	-	18900	For complete testing
12.2(Z)	-	18900	For complete testing
12.2(S)	-	18900	For complete testing
12.2(Follower Gland)	-	18900	For complete testing
12.2(D)	-	18900	For complete testing
12.2(C )	-	18900	For complete testing
12.2(E)	-	18900	For complete testing
12.2(F)	-	18900	For complete testing
12.2(Hole Dia)	-	18900	For complete testing
12.2(N)	-	18900	For complete testing
12.2(M)	-	18900	For complete testing
12.2(A)	-	18900	For complete testing
12.2(Dia of Bolt)	-	18900	For complete testing
12.2(L)	-	18900	For complete testing
12.2(No of Bolt)	-	18900	For complete testing
12.2(Rubber Gasket )	-	18900	For complete testing
12.2(N)	-	18900	For complete testing
12.2(Q)	-	18900	For complete testing
12.2(R)	-	18900	For complete testing
12.2(T)	-	18900	For complete testing
12.2(U)	-	18900	For complete testing
12.2(V)	-	18900	For complete testing
14(Coating Test at 0 and 65 Degree Centegrade)	-	18900	For complete testing
15(Internal Lining)	-	18900	For complete testing
15.1(Cement mortor lining)	-	18900	For complete testing
17.2(Flexible Joints)	-	18900	For complete testing
18.1(Positive internal hydrostatic pressure)	-	18900	For complete testing
18.3(Stregth and Leak tightness test for flanged joints)	-	18900	For complete testing

-
Included w.e.f.21.05.2025

5983

ELCA Laboratories, Navi Mumbai

7169736

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

Grade E 250/E275/E300/E350/E410/E450/E550/E600

0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 11.3(Bend Test)	-	300	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	700	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	700	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	700	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl 18(Weight)	-	150	-
14.2(Grain Size)	-	600	-
Clause 12(Impact Test)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Clause 11.3(Bend Test)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
14.2(Grain Size)	-	600	-
Clause 12(Impact Test)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Clause 11.3(Bend Test)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
14.2(Grain Size)	-	600	-
Clause 12(Impact Test)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl 15(Length, Width & Thickness)	-	1500	-
Cl 11.3(Press)	-	300	-
Cl 10.3(UTM)	-	700	-
Cl 18(Weight)	-	500	-
Cl 15(Length, Width & Thickness)	-	1500	-
Cl 11.3(Press)	-	300	-
Cl 10.3(UTM)	-	700	-
Cl 18(Weight)	-	500	-
Cl 15(Length, Width & Thickness)	-	1500	-
Cl 11.3(Press)	-	300	-
Cl 10.3(UTM)	-	700	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	150	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	150	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	150	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	150	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	150	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	0	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	150	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	150	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	150	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	150	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	150	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	150	-
Cl 18(Weight)	-	500	-
Cl 15(Length, Width & Thickness)	-	1500	-
Cl 11.3(Press)	-	300	-
Cl 10.3(UTM)	-	700	-
14.2(Inclusion)	-	750	-
Cl 10.3(UTM)	-	700	-
Cl 11.3(Press)	-	300	-
Cl 18(Weight)	-	500	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	150	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	150	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	150	-
Clause 8, Table 1, Note 5(By Calculation)	-	0	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	150	-
Clause 8, Table 1, Note 6(By Calculation)	-	0	-
Clause 7(IS 2062)	-	1500	-
Clause 11.3(IS 1599)	-	300	-
Clause 12(IS 1757)	-	1500	-
Clause 15, Table 4(IS 2062)	-	1500	-
8(Micro Alloying elements)	-	0	-
8(Niobium as Nb)	-	150	-
8(Vanadium as V)	-	150	-
8(Titanium as Ti)	-	150	-
10(Tensile Strength-IS:1608(P1)-22)	-	700	-
10(Yield Stress-IS:1608(P1)-22)	-	700	-
10(Elongation on SoA 5.65mm GL)	-	700	-
Clause 8, Table 1, Note 2(Aluminium)	-	150	-
Clause 8, Table 1, Note 5(Niobium)	-	150	-
Clause 8, Table 1, Note 5(Titanium)	-	150	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	0	-
Clause 8, Table 1, Note 6(Boron)	-	300	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	0	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	0	-
Cl. 15, 16(Width )	-	500	-
Cl. 15, 16(Thickness )	-	500	-
Cl. 15, 16(Weight)	-	500	-
Cl 15(Length, Width & Thickness)	-	1500	-

02 Feb, 2028

-
Included w.e.f. 01.01.2026 Exclusion: Clause 13 Y Groove Crackability Test

5984

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 18801 (2023)

Refrigerated storage cabinets and counters for professional use Performance and energy consumption

Refrigerated Storage Cabinets and Counters for professional use

273000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Condensate drainage)	-	0	-
Cl-4.2.1(Classification according to temperature)	-	0	-
Cl-4.2.2(Defrosting)	-	0	-
Cl-4.2.3(Electrical energy consumption)	-	0	-
Cl-5.1(General)	-	0	-
Cl-5.2(Tests outside test room)	-	0	-
Cl-5.3.2(Tests inside test room- Test conditions)	-	0	-
Cl-5.3.3(Tests inside test room- Preparation of test cabinet)	-	0	-
Cl-5.3.4(Tests inside test room- Temperature test)	-	60000	-
Cl-5.3.5(Tests inside test room- Electrical energy consumption test.)	-	175000	-
Cl-6.1(Calculation of net volume.)	-	5000	-
Cl-6.2(Load line and cabinet label marking durability)	-	500	-
Cl-6.3(Tests outside test room — Linear dimensions, areas and volumes)	-	5000	-
Cl-4.1(Condensate drainage)	-	-	-
Cl-4.2.1(Classification according to temperature)	-	-	-
Cl-4.2.2(Defrosting)	-	-	-
Cl-4.2.3(Electrical energy consumption)	-	-	-
Cl-5.1(General)	-	-	-
Cl-5.2(Tests outside test room)	-	-	-
Cl-5.3.2(Tests inside test room- Test conditions)	-	-	-
Cl-5.3.3(Tests inside test room- Preparation of test cabinet)	-	-	-
Cl-5.3.4(Tests inside test room- Temperature test)	-	-	-
Cl-5.3.5(Tests inside test room- Electrical energy consumption test.)	-	-	-
Cl-6.1(Calculation of net volume.)	-	-	-
Cl-6.2(Load line and cabinet label marking durability)	-	-	-
Cl-6.3(Tests outside test room — Linear dimensions, areas and volumes)	-	-	-

19 Mar, 2029

-
-

5985

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	7000	For complete testing
8(Mechanical and Physical Properties)	-	7000	For complete testing
Cl 8(UTM)	-	7000	For complete testing
Cl 9(Workmanship)	-	7000	For complete testing
Cl 9.6(Workmanship)	-	7000	For complete testing
Cl 10(Workmanship)	-	7000	For complete testing
Cl 11(Length, Width & Thickness)	-	7000	For complete testing
Cl 8(UTM)	-	7000	For complete testing
Cl 9.5(Workmanship)	-	7000	For complete testing
Cl 9.6(Workmanship)	-	7000	For complete testing
Cl 10(Workmanship)	-	7000	For complete testing
Cl 11(Length, Width & Thickness)	-	7000	For complete testing
Cl 8(UTM)	-	7000	For complete testing
Cl 9(Workmanship)	-	7000	For complete testing
Cl 9.6(Workmanship)	-	7000	For complete testing
Cl 10(Workmanship)	-	7000	For complete testing
Cl 11(Length, Width & Thickness)	-	7000	For complete testing
7.0(ALUMINIUM)	-	7000	For complete testing
7.0(MICRO ALLOYS)	-	7000	For complete testing
7.0(NITROGEN)	-	7000	For complete testing
7.0(SILICON)	-	7000	For complete testing
7.0(MANGANESE)	-	7000	For complete testing
7.0(PHOSPHORUS)	-	7000	For complete testing
7.0(SULPHUR)	-	7000	For complete testing
7.0(CARBON)	-	7000	For complete testing
Cl. 11(Out of square)	-	7000	For complete testing
Cl. 11(Flatness)	-	7000	For complete testing
Cl. 11(Camber)	-	7000	For complete testing
Cl. 11(Width)	-	7000	For complete testing
Cl. 11(Thickness)	-	7000	For complete testing
Cl. 8.7(Bake Hardening Index)	-	7000	For complete testing
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	7000	For complete testing
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	7000	For complete testing
Cl. 8.4(Bend Test)	-	7000	For complete testing
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	7000	For complete testing
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	7000	For complete testing
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	7000	For complete testing
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	7000	For complete testing
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	7000	For complete testing
Cl. 9 Table 8(Surface roughness)	-	7000	For complete testing
Cl 11(Length, Width & Thickness)	-	7000	For complete testing
Cl 10(Workmanship)	-	7000	For complete testing
Cl 9.6(Workmanship)	-	7000	For complete testing
Cl 9(Workmanship)	-	7000	For complete testing
Cl 8(UTM)	-	7000	For complete testing
Cl 8(UTM)	-	7000	For complete testing
Cl 9(Workmanship)	-	7000	For complete testing
Cl 9.6(Workmanship)	-	7000	For complete testing
Cl 10(Workmanship)	-	7000	For complete testing
Cl 11(Thickness (08))	-	7000	For complete testing
Cl 7(UTM)	-	7000	For complete testing
8.1(Mechanical)	-	7000	For complete testing
8.2(Cupping test)	-	7000	For complete testing
8.3(Hardness HRB/HV)	-	7000	For complete testing
8.4(Bend Test)	-	7000	For complete testing
8.5(Plastic strain ratio)	-	7000	For complete testing
8.6(Tensile strain Hardening component)	-	7000	For complete testing
8.7(Black Hardening Index)	-	7000	For complete testing
9(Surface finish)	-	7000	For complete testing
10(Freedom from defects)	-	7000	For complete testing
13(Marking)	-	7000	For complete testing
Cl. 7.3(Carbon)	-	7000	For complete testing
Cl. 7.3(Manganese)	-	7000	For complete testing
Cl. 7.3(Suphur)	-	7000	For complete testing
Cl. 7.3(Phosphorus)	-	7000	For complete testing
Cl. 7.3(Silicon)	-	7000	For complete testing

-
Included w.e.f.21.05.2025

5986

LILABA ANALYTICAL LABORATORIES LLP, SURAT

7137216

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Permitted in all capacity/Volume/Quantities

11700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	100	+18 % GST
Cl. 4.2(Cl. 4.2 Design, Shape & Dimension)	-	100	+18%GST
4.3(Manufacture,Workmanship,Finish & appearance)	-	100	+18%GST
4.4(Capacity)	-	300	+18%GST
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	100	+18 % GST
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	100	+18 % GST
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	100	+18 % GST
4.6.2(TRANSPARANCY)	-	300	+18%GST
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	300	+18%GST
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	600	+18%GST
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	400	+18%GST
4.6.4(DROP TEST)	-	300	+18%GST
Cl. 4.6.5(Cl. 4.6.5 Migration)	-	1000	+18%GST
4.6.5.1 (chem)(Colour migration (Container))	-	1000	+18 % GST
4.6.6(PORTABILITY TEST)	-	1800	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	300	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	450	+18%GST
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	2550	+18%GST
4.6.5.1 (chem)(Colour migration (Caps))	-	1000	+18 % GST
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1000	+18 % GST
4.4 (b)(Brimful Capacity)	-	300	+18 % GST
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi)(Manganese)	-	300	+18 % GST
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	2550	+18 % GST

11 Jun, 2029

-
-

5987

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3312 (2021)

Steel Shelving Cabinets ( Adjustable Type ) - Specification ( Third Revision )

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(MARKING)	-	37500	For complete testing
15(MARKING)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
4.1(DIMENSIONS)	-	37500	For complete testing
5(FABRICATION)	-	37500	For complete testing
5.1(Sides)	-	37500	For complete testing
5.1(Sides)	-	37500	For complete testing
5.2(Back)	-	37500	For complete testing
5.2(Back)	-	37500	For complete testing
5.3(Top and Bottom)	-	37500	For complete testing
5.3(Top and Bottom)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5(Shelves)	-	37500	For complete testing
5.5.1(Self supporting Arrangement)	-	37500	For complete testing
5.6(Doors)	-	37500	For complete testing
5.6.1(Right Door)	-	37500	For complete testing
5.6.1(Right Door)	-	37500	For complete testing
5.6.1(Right Door)	-	37500	For complete testing
5.6.1(Right Door)	-	37500	For complete testing
5.6.2(Left Door)	-	37500	For complete testing
5.6.2(Left Door)	-	37500	For complete testing
5.7(Pedestal)	-	37500	For complete testing
5.7(Pedestal)	-	37500	For complete testing
5.8(Hinges)	-	37500	For complete testing
5.7(Pedestal)	-	37500	For complete testing
5.8(Hinges)	-	37500	For complete testing
5.8(Hinges)	-	37500	For complete testing
5.7(Pedestal)	-	37500	For complete testing
5.9(Locks)	-	37500	For complete testing
5.10(Lockers)	-	37500	For complete testing
5.10(Lockers)	-	37500	For complete testing
5.10(Lockers)	-	37500	For complete testing
5.10(Lockers)	-	37500	For complete testing
5.10.2(Doors)	-	37500	For complete testing
5.10.2(Doors)	-	37500	For complete testing
5.10.2(Doors)	-	37500	For complete testing
5.10.2(Doors)	-	37500	For complete testing
5.10.3(Locks)	-	37500	For complete testing
5.10.4(Drawer)	-	37500	For complete testing
5.10.5(Drawer)	-	37500	For complete testing
5.10.6(Drawer)	-	37500	For complete testing
5.10.7(Drawer)	-	37500	For complete testing
5.10.7(Drawer)	-	37500	For complete testing
5.10.7(Drawer)	-	37500	For complete testing
5.10.7(Drawer)	-	37500	For complete testing
6(ASSEMBLY)	-	37500	For complete testing
7(ADDITIONAL ACCESSORIES)	-	37500	For complete testing
8(Loading (Table 3))	-	37500	For complete testing
9(Finish)	-	37500	For complete testing
9.1.1(Steel Sheet Components)	-	37500	For complete testing
9.1.1(Steel Sheet Components)	-	37500	For complete testing
9.1.3(Steel Sheet Components)	-	37500	For complete testing
9.1.3(Steel Sheet Components)	-	37500	For complete testing
9.1.3(Steel Sheet Components)	-	37500	For complete testing
9.2(Steel Sheet Components)	-	37500	For complete testing
15(MARKING)	-	-	-
15(MARKING)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
4.1(DIMENSIONS)	-	-	-
5(FABRICATION)	-	-	-
5.1(Sides)	-	-	-
5.1(Sides)	-	-	-
5.2(Back)	-	-	-
5.2(Back)	-	-	-
5.3(Top and Bottom)	-	-	-
5.3(Top and Bottom)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5(Shelves)	-	-	-
5.5.1(Self supporting Arrangement)	-	-	-
5.6(Doors)	-	-	-
5.6.1(Right Door)	-	-	-
5.6.1(Right Door)	-	-	-
5.6.1(Right Door)	-	-	-
5.6.1(Right Door)	-	-	-
5.6.2(Left Door)	-	-	-
5.6.2(Left Door)	-	-	-
5.7(Pedestal)	-	-	-
5.7(Pedestal)	-	-	-
5.8(Hinges)	-	-	-
5.7(Pedestal)	-	-	-
5.8(Hinges)	-	-	-
5.8(Hinges)	-	-	-
5.7(Pedestal)	-	-	-
5.9(Locks)	-	-	-
5.10(Lockers)	-	-	-
5.10(Lockers)	-	-	-
5.10(Lockers)	-	-	-
5.10(Lockers)	-	-	-
5.10.2(Doors)	-	-	-
5.10.2(Doors)	-	-	-
5.10.2(Doors)	-	-	-
5.10.2(Doors)	-	-	-
5.10.3(Locks)	-	-	-
5.10.4(Drawer)	-	-	-
5.10.5(Drawer)	-	-	-
5.10.6(Drawer)	-	-	-
5.10.7(Drawer)	-	-	-
5.10.7(Drawer)	-	-	-
5.10.7(Drawer)	-	-	-
5.10.7(Drawer)	-	-	-
6(ASSEMBLY)	-	-	-
7(ADDITIONAL ACCESSORIES)	-	-	-
8(Loading (Table 3))	-	-	-
9(Finish)	-	-	-
9.1.1(Steel Sheet Components)	-	-	-
9.1.1(Steel Sheet Components)	-	-	-
9.1.3(Steel Sheet Components)	-	-	-
9.1.3(Steel Sheet Components)	-	-	-
9.1.3(Steel Sheet Components)	-	-	-
9.2(Steel Sheet Components)	-	-	-

-
Included w.e.f.21.05.2025

5988

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

all

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	45000	-
Cl. No.5("SIZE AND FITTINGS ")	-	45000	-
Cl. No.6("CONSTRUCTION ")	-	45000	-
Cl. No.7(MATERIAL)	-	45000	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	45000	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	45000	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	45000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	45000	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	45000	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	45000	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	45000	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	45000	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	45000	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	45000	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	45000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	45000	-
Cl. No.8.4,Table no. 5(i)(Density)	-	45000	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	45000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	45000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	45000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	45000	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	45000	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	45000	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	45000	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	45000	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	45000	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	45000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	45000	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	45000	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	45000	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	45000	-
Cl. No.9.(MARKING AND PACKING)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	45000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	45000	-
Cl. No.8.6.2(Lead content)	-	45000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	45000	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	45000	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	45000	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	45000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	45000	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	45000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	45000	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	45000	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	45000	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	45000	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	45000	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	45000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	45000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	45000	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	45000	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	45000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	45000	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	45000	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	45000	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	45000	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	45000	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	45000	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	45000	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	45000	-
Cl-10 (Amendment No-1)(Marking)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	45000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	45000	-

08 May, 2028

-
Included w.e.f.18.07.2025

5989

Robust Testing Solutions Private Limited, Alwar

8173526

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

Elastomer-insulated Cables, Part 2: For Working Voltages from 3.3 kV up to and Including 33kV

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTORS: Cables for Fixed Installation)	-	0	-
4.2(CONDUCTORS:Flexible Cables)	-	0	-
5(INSULATION)	-	0	-
7.1(Proofed Tape)	-	0	-
7.1(Proofed Tape: Thickness)	-	1000	-
7.2(Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-	1000	-
7.3(Tape )	-	0	-
8(SCREENING)	-	0	-
9(CENTRE AND FILLERS)	-	0	-
10(ARMOUR)	-	0	-
6(SEMICONDUCTING COMPOUND)	-	0	-
11.1(Inner Sheath)	-	0	-
11.2(Outer Sheath)	-	0	-
12.1(Tapes)	-	0	-
12.2(Cords and Yarns)	-	0	-
13.1 & 13.2(CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-	0	-
13.3(Earthing Conductor)	-	0	-
13.3.1(Earthing Conductor)	-	0	-
13.4(Separator Tape)	-	0	-
14(CONDUCTOR SCREENING)	-	0	-
15.1(INSULATION : Application)	-	30000	Additional charge 30,000/- for each core
15.2(Thickness of Insulation)	-	1000	-
15.3(Tolerance on Thickness of Insulation)	-	0	-
16.1(INSULATION SCREENING : Application)	-	0	-
16.2(INSULATION SCREENING : Parts )	-	0	-
16.3(INSULATION SCREENING : Non Metallic Parts )	-	0	-
16.4(INSULATION SCREENING : Metallic Parts )	-	0	-
17(CORE IDENTIFICATION)	-	0	-
17(CORE IDENTIFICATION: Unscreed cable )	-	0	-
18.1(LAYING UP OF CORES)	-	0	-
18.2(LAYING UP OF CORES : Flexible cable)	-	0	-
18.3(LAYING UP OF CORES : Binder Tape)	-	0	-
19.1(Inner Sheath : Application)	-	0	-
19.2(Thickness of Inner Sheath)	-	1000	-
19.3(Inner Sheath : proofed tape)	-	0	-
20.1(ARMOURING: Application)	-	0	-
20.2(Type of Armour)	-	0	-
20.2 1.2(Direction of lay of armour)	-	0	-
20.2 1.3(Joint in armour)	-	0	-
20.2.2(Filling Factot )	-	0	-
20.2.2(Diameter of braiding)	-	1000	-
20.2.2.1(Braiding material)	-	0	-
20.3(Substitution of the galvanized steel wires/formed)	-	0	-
21.1(OUTER SHEATH)	-	0	-
21.2(Coulor of Outer sheath)	-	0	-
21.3(Thickness of Outer Sheat: Average)	-	1000	-
21.3(Thickness of Outer Sheat: Minimum)	-	0	-
22.1 a)1)(Annealing test (for copper) - IS 10810: Part 1)	-	1500	-
22.1 a)2)(Tensile test (for aluminium) -IS 10810: Part 2)	-	1500	-
22.1 a)3)(Wrapping Test (for aluminium) - IS 10810: Part 3)	-	1000	-
22.1 a)4)(Conductor resistance test)	-	2500	-
22.1 a)5)(Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-	1500	-
22.1 b)1)(Test for Galvanized Steel Wires/Formed Wires 1) Dimensions -IS 10810: Part 36)	-	1000	-
22.1 b)2)i)(Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-	1000	-
22.1 b)2)ii)(Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-	1000	-
22.1 b)2)iii)(Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-	1000	-
22.1 b)2)iv)(Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-	1000	-
22.1 b)2)v)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-	2500	-
22.1 b)2)vi)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-	2500	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-	1500	-
22.1 c)2)(Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-	1500	-
22.1 c)2)(Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-	1500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-	2500	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)4)(Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Insulation( Ageing in air bomb) : Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath(Ageing in air bomb) : Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath ( Ageing in air bomb): Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)5)(Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-	4000	-
22.1 c)5)(Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-	0	-
22.1 c)5)(Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-	5000	-
22.1 c)5)(Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-	0	-
22.1 c)6)(Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-	3000	-
22.1 c)6)(Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-	3000	-
22.1 c)7)(Tear Resistance test - IS 10810: Part 17)	-	5500	-
22.1 c)8)(Shrinkage : Insulation - IS 10810: Part 12)	-	3000	-
22.1 c)8)(Shrinkage test- Crack observed : Insulation - IS 10810: Part 13)	-	0	-
22.1 c)8)(Shrinkage test : Sheath - IS 10810: Part 12)	-	3000	-
22.1 c)8)(Shrinkage test - Crack oberved : Sheath - IS 10810: Part 13)	-	0	-
22.1 c)9)(Hot deformation test : Insulation - IS 10810: Part 15)	-	2500	-
22.1 c)9)(Hot deformation test : Sheath - IS 10810: Part 15)	-	2500	-
22.1 c)10)(Loss of mass in air oven : Insulation - IS 10810: Part 10)	-	3500	-
22.1 c)10)(Loss of mass in air oven : Sheath - IS 10810: Part 10)	-	3500	-
22.1 c)11)(Heat shock : Insulation - IS 10810: Part 14)	-	2500	-
22.1 c)11)(Heat shock : Sheath - IS 10810: Part 14)	-	2500	-
22.1 c)12)(Thermal stability : Insulation - IS 10810: Part 60)	-	1500	-
22.1 c)12)(Thermal stability : Sheath - IS 10810: Part 60)	-	1500	-
22.1 d)(Insulation Resistance Test: Volume resistivity )	-	3500	-
22.1 d)(Insulation Resistance Test: Insulation resistance constant )	-	0	-
22.1 e)(Partial Discharge Test)	-	25000	-
22.1 f)(Bending Test Followed by Partial Discharge Test)	-	0	-
22.1 g)(Dielectric Power Factor Test 1) As a function of Voltage)	-	10000	-
22.1 g)(Dielectric Power Factor Test 1) As a function of temperature)	-	7000	-
22.1 h)(Heating Cycle Test)	-	20000	-
22.1 j)(Impulse Withstand Test)	-	20000	-
22.1 k)(High Voltage Test for Four Hours)	-	5000	-
22.1 m)(Water Absorption Test - IS 10810: Part 28)	-	5500	-
22.1 n)(Flammability)	-	3000	-
24.1(Manufacturer's Identification)	-	0	-
24.2(Voltage Identification)	-	0	-
24.3(Cable Code)	-	0	-
25.2.1(Marking on drum )	-	0	-
25.2.2(BIS Certification Marking)	-	0	-
22.4 (a)(Ozone Resistance Test)	-	5500	-
22.4 (b)(Cold impacts test for PVC sheath)	-	5000	-

02 Aug, 2029

-
Included w.e.f 04.06.2025

5990

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

All

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	1000	-
Cl-5.2(Emitter Ends)	-	500	-
Cl-5.3(Materials)	-	0	This is not a test
Cl-6.1(Test Specimens)	-	0	This is not a test
Cl-6.2.1(polyethylene pipe)	-	0	This is not a test
Cl-6.2.2("grease or chemicals ")	-	0	This is not a test
Cl-6.2.3(water temperature)	-	0	This is not a test
Cl-6.3(Accuracy or Measuring Devices)	-	0	This is not a test
Cl-7.1(Construction and Workmanship)	-	100	-
Cl-7.2(Flow Paths in Emitter)	-	500	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000	-
Cl-7.4(Emitter Pull-Out)	-	1000	-
Cl-7.4.1(In-Line Emitters)	-	1000	-
Cl-7.4.2(On-Line Emitters)	-	1000	-
Cl-8.1.1(Uniformity of Emission Rate)	-	2000	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	2000	-
Cl-8.1.3(Determination of Emitter Exponent)	-	8000	-
Cl-9(Marking)	-	100	-

18 Dec, 2027

-
Included w.e.f 21.05.2025

5991

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

From Diameter 0.20 mm onwards

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	1000	-
As per clause 7(CARBON)	-	1000	-
As per clause 7(SILICON)	-	1000	-
As per clause 7(MANGANESE)	-	1000	-
As per clause 7(PHOSPHORUS)	-	1000	-
As per clause 7(SULPHUR)	-	1000	-
As per clause 7(CHROMIUM)	-	1000	-
As per clause 7(MOLYBEDNUM)	-	500	-
As per clause 7(NICKEL)	-	1000	-
As per clause 7(NITROGEN)	-	1000	-
As per clause 7(COPPER)	-	500	-
As per clause 7(NIOBIUM)	-	500	-
As per clause 7(TITANIUM)	-	500	-
As per clause 7(ALUMINIUM)	-	500	-
As per clause 8(HEAT TREATMENT)	-	0	-
As per clause 9(Dimension Tolerance)	-	1000	-
As per clause 10(TENSILE TEST)	-	3000	-
As per clause 10.2(REVERSE BEND TEST)	-	2000	-
As per clause 10.3(TORSION TEST)	-	2000	-
As per clause 14(FINISH)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	5000	-
As per clause 16.2(MARKING)	-	0	-

18 Dec, 2027

-
Included w.e.f 21.05.2025

5992

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5820 (2024)

PRECAST CONCRETE CABLE COVERS â SPECIFICATION (first revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Cement)	-	19500	For complete testing
Cl-4.2(Aggregates)	-	19500	For complete testing
Cl-4.3(Pulverized Fuel Ash)	-	19500	For complete testing
Cl-4.4(Water)	-	19500	For complete testing
Cl-4.5(Steel Wire or Rod)	-	19500	For complete testing
Cl-5(Manufacture)	-	19500	For complete testing
Cl-6(Design)	-	19500	For complete testing
Cl-7.1(cable covers)	-	19500	For complete testing
Cl-7.2(Dimensions)	-	19500	For complete testing
Cl-7.3(Impact Strength)	-	19500	For complete testing
Cl-8.2(Number of Tests)	-	19500	For complete testing
Cl-11(Marking)	-	19500	For complete testing

-
Included w.e.f.21.05.2025

5993

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 7483 (2018)

Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1000	-
4, table 2(Material)	-	5000	-
4, table 2(General requirements)	-	100	-
4, table 2(Thread)	-	2000	-
4, table 2(Mechanical property)	-	6500	-
4, table 2(Tolerances)	-	1000	-
4, table 2(Cross recess)	-	100	-
4, table 2(Finish - coating)	-	4000	-
4, table 2(Surface integrity)	-	1000	-
4, table 2(Acceptability)	-	100	-
5(Designation)	-	100	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	-	-
4, table 2(Material)	-	-	-
4, table 2(General requirements)	-	-	-
4, table 2(Thread)	-	-	-
4, table 2(Mechanical property)	-	-	-
4, table 2(Tolerances)	-	-	-
4, table 2(Cross recess)	-	-	-
4, table 2(Finish - coating)	-	-	-
4, table 2(Surface integrity)	-	-	-
4, table 2(Acceptability)	-	-	-
5(Designation)	-	-	-

-
Included w.e.f 13.11.2025

5994

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9295 (2024)

STEEL TUBES FOR IDLERS FOR BELT CONVEYORS - SPECIFICATION (second revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Types /Grade and Designation)	-	12500	For complete testing
As per clause 6(Material)	-	12500	For complete testing
As per clause 7(Manufacture)	-	12500	For complete testing
As per clause 7.1.5(Sulphur)	-	12500	For complete testing
As per clause 7.1.6(Phosphorus)	-	12500	For complete testing
As per clause 8(Mechanical Properties)	-	12500	For complete testing
As per clause 8.1(Tensile Test)	-	12500	For complete testing
As per clause 8.1.1(Yield Stress)	-	12500	For complete testing
As per clause 8.1.2(Elongation)	-	12500	For complete testing
As per clause 8.2(Drift Expansion Test)	-	12500	For complete testing
As per clause 8.3(Flattening Test)	-	12500	For complete testing
Cl-9.1, Table-2(Outside Diameter)	-	12500	For complete testing
As per clause 10(Hardness Test)	-	12500	For complete testing
As per clause 11(Mechanical Test)	-	12500	For complete testing
As per clause 12(Retests)	-	12500	For complete testing
As per clause 13(Dimension Tolerance)	-	12500	For complete testing
As per clause 14(Workmanship)	-	12500	For complete testing
As per clause 15(Straightness)	-	12500	For complete testing
As per clause 16(Length)	-	12500	For complete testing
As per clause 17(Surface Protection)	-	12500	For complete testing
As per clause 18(Marking)	-	12500	For complete testing

-
Included w.e.f.21.05.2025

5995

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

ALL

18800 View breakup
-

Clause No.	Exclusion	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	-
"Cl. 11 IS 4159:2021"(Heating)	-	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	-
"Cl. 18 IS 4159:2021"(Endurance)	-	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	-
"Cl. 22 IS 4159:2021"(Construction)	-	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	-
"Cl. 24 IS 4159:2021"(Components)	-	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	-
Cl.22.106(CONSTRUCTION)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.2 of IS 4159:2021(Marking)	-	-
Cl.7.3 of IS 4159:2021(Marking)	-	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11.2 of IS 4159:2021(Heating)	-	-
Cl.11.101 of IS 4159:2021(Heating)	-	-
Cl.18 of IS 4159:2021(Endurance Test)	-	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.22.101 of IS 4159:2021(Construction)	-	-
Cl.22.102 of IS 4159:2021(Construction)	-	-
Cl.22.103 of IS 4159:2021(Construction)	-	-
Cl.22.104 of IS 4159:2021(Construction)	-	-
Cl.22.105 of IS 4159:2021(Construction)	-	-
Cl.22.106 of IS 4159:2021(Construction)	-	-
Cl.22.107 of IS 4159:2021(Construction)	-	-
Cl.22.108 of IS 4159:2021(Construction)	-	-
Cl.22.109 of IS 4159:2021(Construction)	-	-
Cl.22.110 of IS 4159:2021(Construction)	-	-
Cl.22.111 of IS 4159:2021(Construction)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	-
19.11.4.7(Harmonics)	-	-
"Cl. 6 IS 4159:2021"(Classification)	-	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	-
"Cl. 11 IS 4159:2021"(Heating)	-	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	-
"Cl. 18 IS 4159:2021"(Endurance)	-	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	-
"Cl. 22 IS 4159:2021"(Construction)	-	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	-
"Cl. 24 IS 4159:2021"(Components)	-	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	-
Cl.22.106(CONSTRUCTION)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.2 of IS 4159:2021(Marking)	-	-
Cl.7.3 of IS 4159:2021(Marking)	-	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11.2 of IS 4159:2021(Heating)	-	-
Cl.11.101 of IS 4159:2021(Heating)	-	-
Cl.18 of IS 4159:2021(Endurance Test)	-	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.22.101 of IS 4159:2021(Construction)	-	-
Cl.22.102 of IS 4159:2021(Construction)	-	-
Cl.22.103 of IS 4159:2021(Construction)	-	-
Cl.22.104 of IS 4159:2021(Construction)	-	-
Cl.22.105 of IS 4159:2021(Construction)	-	-
Cl.22.106 of IS 4159:2021(Construction)	-	-
Cl.22.107 of IS 4159:2021(Construction)	-	-
Cl.22.108 of IS 4159:2021(Construction)	-	-
Cl.22.109 of IS 4159:2021(Construction)	-	-
Cl.22.110 of IS 4159:2021(Construction)	-	-
Cl.22.111 of IS 4159:2021(Construction)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	-
19.11.4.7(Harmonics)	-	-
"Cl. 6 IS 4159:2021"(Classification)	-	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	-
"Cl. 11 IS 4159:2021"(Heating)	-	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	-
"Cl. 18 IS 4159:2021"(Endurance)	-	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	-
"Cl. 22 IS 4159:2021"(Construction)	-	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	-
"Cl. 24 IS 4159:2021"(Components)	-	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	-
Cl.22.106(CONSTRUCTION)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.1 of IS 4159:2021(Marking)	-	-
Cl.7.2 of IS 4159:2021(Marking)	-	-
Cl.7.3 of IS 4159:2021(Marking)	-	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	-
Cl.11.2 of IS 4159:2021(Heating)	-	-
Cl.11.101 of IS 4159:2021(Heating)	-	-
Cl.18 of IS 4159:2021(Endurance Test)	-	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	-
Cl.22.101 of IS 4159:2021(Construction)	-	-
Cl.22.102 of IS 4159:2021(Construction)	-	-
Cl.22.103 of IS 4159:2021(Construction)	-	-
Cl.22.104 of IS 4159:2021(Construction)	-	-
Cl.22.105 of IS 4159:2021(Construction)	-	-
Cl.22.106 of IS 4159:2021(Construction)	-	-
Cl.22.107 of IS 4159:2021(Construction)	-	-
Cl.22.108 of IS 4159:2021(Construction)	-	-
Cl.22.109 of IS 4159:2021(Construction)	-	-
Cl.22.110 of IS 4159:2021(Construction)	-	-
Cl.22.111 of IS 4159:2021(Construction)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	-
19.11.4.7(Harmonics)	-	-

08 Feb, 2027

-
Included w.e.f. 11.09.2025 Exclusion: "19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) "

5996

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

All

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Application Classes)	-	800000	-
4.0(Construction Requirements)	-	800000	-
5.0(Polymeric Materials)	-	800000	-
6.0(Internal Wiring and Current Carrying Parts)	-	800000	-
7.0(Connections)	-	800000	-
8.0(Bonding and Grounding)	-	800000	-
11.0(Marking)	-	800000	-
12.0(Requirements of Supplied documents)	-	800000	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	800000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	800000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	800000	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	800000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	800000	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	800000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	800000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	800000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	800000	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	800000	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	800000	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	800000	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	800000	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	800000	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	800000	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	800000	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	800000	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	800000	-
5.4.3 IS/IEC 61730-1(Rivets)	-	800000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	800000	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	800000	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	800000	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	800000	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	800000	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	800000	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	800000	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	800000	-
5.3.4 IS/IEC 61730-1(Connectors)	-	800000	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	800000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	800000	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	800000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	800000	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	800000	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	800000	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	800000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	800000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	800000	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	800000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	800000	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	800000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	800000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	800000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	800000	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	800000	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	800000	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	800000	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	800000	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	800000	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	800000	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	800000	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	800000	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	800000	-
5.4.3 IS/IEC 61730-1(Rivets)	-	800000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	800000	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	800000	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	800000	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	800000	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	800000	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	800000	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	800000	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	800000	-
5.3.4 IS/IEC 61730-1(Connectors)	-	800000	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	800000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	800000	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	800000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	800000	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	800000	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	800000	-
4(Classification, applications and intended use)	-	800000	-
5.2(Marking and documentation)	-	800000	-
5.3(Electrical components and insulation)	-	800000	-
5.3.2(Internal wiring)	-	800000	-
5.3.4(Connectors)	-	800000	-
5.4(Mechanical and electromechanical connections)	-	800000	-
5.5(Materials)	-	800000	-
5.5.2, 5.3.7(Polymeric materials)	-	800000	-
5.6(Protection against electric shock)	-	800000	-
5.6.3.4(Clearances and creepage distances)	-	800000	-
9.0(Creepage and clearance distances)	-	800000	-
10.0(Field Wiring Compartments with covers)	-	800000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

5997

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

All

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.2(Visual inspection MST 01)	-	800000	-
Clause 10.3(Performance at STC MST 02)	-	800000	-
Clause 10.4(Maximum powerdetermination MST 03)	-	800000	-
Clause 10.5(Insulation thickness test MST 04)	-	800000	-
Clause 10.6(Durability of markings MST 05)	-	800000	-
Clause 10.7(Sharp edge test MST 06)	-	800000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	800000	-
Clause 10.9(Accessibility test MST 11)	-	800000	-
Clause 10.10(Cut susceptibility test MST 12)	-	800000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	800000	-
Clause 10.12(Impulse voltage test MST 14)	-	800000	-
Clause 10.13(Insulation test MST 16)	-	800000	-
Clause 10.14(Wet leakage current test MST 17)	-	800000	-
Clause 10.15(Temperature test MST 21)	-	800000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	800000	-
Clause 10.17(Fire test MST 23)	-	800000	-
Clause 10.18(Ignitability test MST 24)	-	800000	-
Clause 10.19(Bypass diode thermal test MST 25)	-	800000	-
Clause 10.20(Reverse current overload test MST 26)	-	800000	-
Clause 10.21(Module breakage test MST 32)	-	800000	-
Clause 10.22(Screw connections test MST 33)	-	800000	-
Clause 10.23(Static mechanical load test MST 34)	-	800000	-
Clause 10.24(Peel test MST 35)	-	800000	-
Clause 10.25(Lap shear strength test MST 36)	-	800000	-
Clause 10.26(Materials creep test MST 37)	-	800000	-
Clause 10.27(Robustness of terminations test MST 42)	-	800000	-
Clause 10.28(Thermal cycling test MST 51)	-	800000	-
Clause 10.29(Humidity freeze test MST 52)	-	800000	-
Clause 10.30(Damp heat test MST 53)	-	800000	-
Clause 10.31(UV test MST 54)	-	800000	-
Clause 10.32(Cold conditioning MST 55)	-	800000	-
Clause 10.33(Dry heat conditioning MST 56)	-	800000	-

25 Apr, 2028

-
Included w.e.f.26.05.2025

5998

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 15853 (2009)

Textiles – Polyester blended woven suiting for uniforms

Textile

27420 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	510	-
4.1, Table 1,ii)(Length,m)	-	510	-
4.1, Table 1,iii)(Overall widthc m)	-	510	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	510	-
4.1, Table 1,v)(v) Mass, g/m2)	-	510	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	760	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	1010	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	1010	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	1500	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	5000	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	1220	-
4.2(Limited Flame Spread Requirement)	-	1810	-
4.3(Anti-Bacterial Activity Value)	-	4810	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	1000	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	410	-
4.1, Table 1,xvi)(Colour fastness)	-	1510	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	610	-
4.1, Table 1,xvi)(Colour fastness)	-	1020	-
4.1, Table 1,xvi)(Colour fastness)	-	1270	-
4.1, Table 1,xvi)(Colour fastness)	-	1020	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	Already given
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	910	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	Already given
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	Already given
4.1, Table 1,ii)(Length,m)	-	0	Already given
4.1, Table 1,iii)(Overall widthc m)	-	0	Already given
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	Already given
4.1, Table 1,v)(v) Mass, g/m2)	-	0	Already given
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	Already given
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	Already given
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	Already given
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	Already given
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	Already given
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	Already given
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	Already given
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	Already given
4.2(Limited Flame Spread Requirement)	-	0	Already given
4.3(Anti-Bacterial Activity Value)	-	0	Already given
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	Already given
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	Already given
4.1, Table 1,ii)(Length,m)	-	0	Already given
4.1, Table 1,iii)(Overall widthc m)	-	0	Already given
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	Already given
4.1, Table 1,v)(v) Mass, g/m2)	-	0	Already given
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	Already given
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	Already given
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	Already given
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	Already given
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	Already given
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	Already given
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	Already given
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	Already given
4.2(Limited Flame Spread Requirement)	-	0	Already given
4.3(Anti-Bacterial Activity Value)	-	0	Already given
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	Already given
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	Already given
4.1, Table 1,ii)(Length,m)	-	0	Already given
4.1, Table 1,iii)(Overall widthc m)	-	0	Already given
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	Already given
4.1, Table 1,v)(v) Mass, g/m2)	-	0	Already given
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	Already given
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	Already given
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	Already given
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	Already given
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	Already given
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	Already given
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	Already given
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	Already given
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	Already given
4.2(Limited Flame Spread Requirement)	-	0	Already given
4.3(Anti-Bacterial Activity Value)	-	0	Already given
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-

-
Included w.e.f 26.05.2025 For fabric only

5999

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 10702 (2023)

Hawai Chappal-Specification

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	4000040000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	40000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	40000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	40000	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	40000	-
4.2(Length)	-	40000	-
4.3(Thickness)	-	40000	-
4.4 , Table No. 1 , i)(Density)	-	40000	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	40000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	40000	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	40000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	40000	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	40000	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	40000	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	40000	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	40000	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	40000	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	40000	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	40000	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	40000	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	40000	-
6(MARKING AND PACKING)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	40000	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	40000	-
Cl.No. 5.2(lead content)	-	40000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	40000	-
Clause 4.1 - 4.1.2(Strap Material)	-	40000	-
Clause 4.1 - 4.1.3(Material)	-	40000	-
Clause 4.1 - 4.1.4(Material)	-	40000	-
Clause 4.2(Material)	-	40000	-
Clause 4.3 - 4.3.1(Thickness)	-	40000	-
Clause 4.3 - 4.3.2(Thickness)	-	40000	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	40000	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	40000	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	40000	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	40000	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	40000	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	40000	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	40000	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	40000	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	40000	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	40000	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	40000	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	40000	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	40000	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	40000	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	40000	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	40000	-
Cl-4 ((Amendment No-1)(Category And Type)	-	40000	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	40000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	40000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	40000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	40000	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	40000	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	40000	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	40000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	40000	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	40000	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	40000	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	40000	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	40000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	40000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	40000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	40000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	40000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	40000	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-
4.1(Material)	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
4.4 , Table No. 1 , i)(Density)	-	0	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	0	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	0	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	0	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	0	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	0	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	0	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	0	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	0	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	0	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	0	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	0	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	0	-
6(MARKING AND PACKING)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	0	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	0	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	0	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	0	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	0	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	0	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	0	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	0	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	0	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	0	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	0	-

08 May, 2028

-
Included w.e.f.18.07.2025

6000

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 712 (1984)

Specification for building limes (Third Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4 ,Table 1(Chem reqd)	-	18500	For complete testing
cl 4, Table 2(Physical reqd)	-	18500	For complete testing
Cl. 4.1 - Table 1 - i(Calcium and Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - ii(Magnesium Oxides, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - iii(Silica, Alumina and Ferric oxide, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - iv(Unhydrated Magnesium oxide, on ignited basis - IS 6932 (part 5) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - v(Insoluble Residue in dilute acid and alkali, on ignited basis - IS 6932 (part 1) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - vi(Carbondioxide on oven dried basis - IS 6932 (part 2) : 1973)	-	18500	For complete testing
Cl. 4.1 - Table 1 - vii(Free moisture content - IS 1514 : 1959)	-	18500	For complete testing
Cl. 4.1 - Table 1 - viii(Available lime as CaO (dry basis) - IS 1514 : 1959)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (ix) (Popping Pitting)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (viii) (Soundness- Le chatelier Expansion)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (vii) (Volume yield)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (vi) (Workability Bumps)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (v) (Transverse strength at 28 days)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (iv) b) (Compressive strength at 28 days)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (iv) a) (Compressive strength at 14 days)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (iii) b) (Final Setting time)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (iii) a) (Initial Setting time)	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (ii) b) (Residue on slaking (Residue on 300 micron IS sieve))	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (ii) a) (Residue on slaking (Residue on 850 micron IS sieve))	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (i) c) (Fineness- (Residue on 212 micron IS Sieve))	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (i) b) (Fineness- (Residue on 300 micron IS Sieve))	-	18500	For complete testing
Clauses 5.1 Table No. 2, SI No. (i) a) (Fineness- (Residue on 2.36 mm IS Sieve))	-	18500	For complete testing

-
Included w.e.f.21.05.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number