| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
250 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
250 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
500 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 5(REQUIREMENTS) |
- |
250 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
250 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
500 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
1200 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
250 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
500 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
1500 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
500 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
11290 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
500 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
500 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 5(REQUIREMENTS) |
- |
250 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
500 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
250 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
500 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
500 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
500 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
11290 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
500 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
500 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 5(REQUIREMENTS) |
- |
500 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
500 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
500 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
2500 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
4500 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
5000 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
8000 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
22500 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
500 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
500 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
1500 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
500 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
1500 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
12500 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
6500 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
22500 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
11290 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
500 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
500 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
500 |
|
- |
| 5(REQUIREMENTS) |
- |
500 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
500 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
1000 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
500 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
500 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
500 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
500 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
1000 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
2500 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
4500 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
5000 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
8000 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
3500 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
1500 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
25000 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
1500 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
500 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
500 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,x)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xi)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black content) |
- |
0 |
|
- |
| 5,3.1,
Table2,iii)
Type I / II / III / IV / V /
VI
Annex K(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
| 5,3.1,
Table2,iv)
Type I / II / III / IV / V /
VI
Annex L(Average asperity height) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) d)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xv)
Type I / II / III / IV / V /
VI / VII
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xvi)
Type I / II / III / IV / V /
VI
Annex J(Stress crack resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) d)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,xii)
Type I / II / III / IV / V /
VI / VII
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiii)
Type I / II / III / IV / V /
VI
ISO 11357 (Part 6)
or ASTM D 5885(Oxidative induction time (OIT) :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiii)
Type I / II / III / IV / V /
VI / VII
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xiv)
Type I / II / III / IV / V /
VI
Oven method of
IS 7016 (Part 8),
ISO 11357-6 and
ASTM D 5885(Oven ageing at 85°C, Retention of
oxidative induction time (OIT) after
90 days :
a) Standard OIT
or
b) High pressure OIT) |
- |
0 |
|
- |
| 3, 3.1(MATERIAL AND MANUFACTURE) |
- |
0 |
|
- |
| 3, 3.2(MATERIAL AND MANUFACTURE
If two or more pieces of geomembranes are used,
the material shall be joined together by a suitable heat
sealing process keeping an overlap of at least 2.5 cm. ) |
- |
0 |
|
- |
| 4, 4.1(VARIETY AND TYPES :
Based on the finish, HDPE geomembrane shall be
of following varieties) |
- |
0 |
|
- |
| 4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under) |
- |
0 |
|
- |
| 5(REQUIREMENTS) |
- |
0 |
|
- |
| 5,3.1,
Table 1(Requirements of Smooth HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) a)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table1,i) b)
Type I / II / III / IV / V /
VI / VII
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table1,ii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) a)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) b)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table1,iv) c)
Type I / II / III / IV / V /
VI / VII
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table1,v)
Type I / II / III / IV / V /
VI / VII
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,vi)
Type I / II / III / IV / V /
VI / VII
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table1,vii)
Type I / II / III / IV / V /
VI / VII
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table1,viii)
Type I / II / III / IV / V /
VI / VII
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table1,ix)
Type I / II / III / IV / V /
VI / VII
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table1,xi)
Type I / II / III / IV / V /
VI / VII
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table1,xiv)
Type I / II / III / IV / V /
VI / VII
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 5,3.1,
Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane) |
- |
0 |
|
- |
| 5,3.1,
Table2,i) a)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(Length) |
- |
0 |
|
- |
| 5,3.1,
Table 2,i) b)
Type I / II / III / IV / V /
VI
IS 7016 (Part 1)(width) |
- |
0 |
|
- |
| 5,3.1,
Table2,ii)
Type I / II / III / IV / V /
VI
Annex K(Average core thickness) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) a)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) b)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Breaking strength,) |
- |
0 |
|
- |
| 5,3.1,
Table 2,v) c)
Type I / II / III / IV / V /
VI
Annex B(Tensile properties:
Yield elongation) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vi) a)
Type I / II / III / IV / V /
VI
Annex C(Tear resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,vii)
Type I / II / III / IV / V /
VI
Annex D(Puncture resistanc) |
- |
0 |
|
- |
| 5,3.1,
Table 2,viii)
Type I / II / III / IV / V /
VI
Annex E(Low temperature crack resistance at minus 30°C±1°C) |
- |
0 |
|
- |
| 5,3.1,
Table 2,iX)
Type I / II / III / IV / V /
VI
Annex F(Hydrostatic resistance) |
- |
0 |
|
- |
| 5,3.1,
Table 2,x)
Type I / II / III / IV / V /
VI
Annex G(Seam strength :
85 percent of the
original actual
fabric strength
or unbreakable
seam) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xii)
Type I / II / III / IV / V /
VI
IS 2530(Carbon black dispersion) |
- |
0 |
|
- |
| 5,3.1,
Table 2,xv)
Type I / II / III / IV / V /
VI
Annex H(Retention of breaking strength after UV exposure of 144 h :
85 percent of the
original actual
fabric strength) |
- |
0 |
|
- |
| 6(DIMENSIONS AND TOLERANCES
The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.) |
- |
0 |
|
- |
| 7, 7.1
Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS:
) |
- |
0 |
|
- |
| 7, 7.2(COLOUR, SURFACE CHARACTERISTICS
AND FREEDOM FROM DEFECTS) |
- |
0 |
|
- |
| 5,3.1,
Table1,iii)
Type I / II / III / IV / V /
VI / VII
Method A of
IS 13162 (Part 3)(Lowest individual of 10 thickness value) |
- |
0 |
|
- |
