BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6181

BIS, Southern Regional Laboratory (SRL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Please see remarks View breakup
Total testing charge for BWP Grade - ₹ 7,450.00 Total testing charge for BWR Grade -₹ 7,100.00 Total testing charge for MR Grade -₹ 7,100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-8.1 (Dimensions -length)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
Quantity Required: 2 Nos of Full Sheets Steady-state Formaldehyde emission (optional test) as per Cl.11.7

6182

Aaditech Test and Calibration Lab LLP

8179926

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	200	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
10.0(Resistance to Heat -Ball presure test)	-	1000	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	1000	-
9.2(Bending Test At Room Temp)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	700	-
7.4(Unifomity of The wall Thickness)	-	500	-
7.3(Length of conduit)	-	500	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	500	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	500	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	500	-
6.3(Standard Mark on Conduit)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.1 - d(Marking)	-	200	-
6.1 - c(Marking)	-	200	-
6.1 - b(Marking)	-	200	-
6.1 - a(Marking)	-	200	-
6.1(Marking)	-	-	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	-	-
6.3(Standard Mark on Conduit)	-	-	-
7.1.1(Maximum and minimum outside diameter of socket)	-	-	-
7.1.1 Table-2(Length of Socket end)	-	-	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	-	-
7.2(Minimum inside diameter of conduit)	-	-	-
7.3(Length of conduit)	-	-	-
7.4(Unifomity of The wall Thickness)	-	-	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	-	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	-	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	-	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	-	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	-	-
10(Resistance to Heat -Ball presure test)	-	-	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	-	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	-	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	-	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	-	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	-	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	-	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	-	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	-	-
10.0(Resistance to Heat -Ball presure test)	-	-	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	-	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	-	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	-	-
9.3(Compression Test at Full force applied (On load))	-	-	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	-	-
9.2(Bending Test At Room Temp)	-	-	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	-	-
7.4(Unifomity of The wall Thickness)	-	-	-
7.3(Length of conduit)	-	-	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	-	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	-	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	-	-
7.1.1 Table-2(Length of Socket end)	-	-	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	-	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	-	-
6.3(Standard Mark on Conduit)	-	-	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	-	-
6.1 - d(Marking)	-	-	-
6.1 - c(Marking)	-	-	-
6.1 - b(Marking)	-	-	-
6.1 - a(Marking)	-	-	-

28 Aug, 2027

-
Included.w.e.f.23.12.2024

6183

BIS, Central Laboratory (CL)

None

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Cl.4.1 (Carbon)	-
As per Cl.4.1 (Sulphur)	-
As per Cl.4.1 (Phosphorus)	-
As per Cl.4.1 (Manganese)	-
As per Cl.4.1 (Nitrogen)	-
As per Cl.4.1 (Silicon)	-
As per Cl.4.1 (Aluminium)	-
As per Cl.4.1 (Vanadium)	-
As per Cl.4.1 (Niobium)	-
As per Cl.4.1 (Copper)	-
As per Cl.4.1 (Titanium)	-
As per Cl.4.1 (Boron)	-
Cl-9.1 (The nominal thickness of sheets)	-

-
-

6184

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1865 (1991)

Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grades)	-	14500	For complete testing
4.1(General requirements)	-	14500	For complete testing
5(Manufacture)	-	14500	For complete testing
6(Workmanship and finish)	-	14500	For complete testing
7(Heat treatment)	-	14500	For complete testing
9(Micro structure)	-	14500	For complete testing
10.1(Separately-Cast Test Samples)	-	14500	For complete testing
10.2(Cast-on Test Samples)	-	14500	For complete testing
11.1(Batch)	-	14500	For complete testing
11.2(Number of Tests per Batch)	-	14500	For complete testing
12.1(Tensile Strength)	-	14500	For complete testing
12.2(Impact Test)	-	14500	For complete testing
13.1(Tensile Test)	-	14500	For complete testing
13.2(Hardness Test)	-	14500	For complete testing
13.3(Impact Test)	-	14500	For complete testing
14(Validity of tests)	-	14500	For complete testing
15(Retest)	-	14500	For complete testing
16(Additional test)	-	14500	For complete testing
17(Marking)	-	14500	For complete testing

04 Dec, 2028

-
Included w.e.f. 13.01.2024

6185

BIS, Central Laboratory (CL)

None

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Medium Density Fibre (MDF) Board)	-
Cl-7 (Finish)	-
Cl-8.1 (Dimensions of prelaminated MDF)	-
Cl-8.2 (Tolerances)	-
Cl-8.2.1 (Edge straightness)	-
Cl-9.1 S.No-(1), i (Density, kg/m3)	-
Cl-9.1 S.No-(1), ii (Variation from mean density, percent)	-
Cl-9.1 S.No-(1), iii (Moisture content, percent)	-
Cl-9.1 S.No-(1), iv (Variation from mean moisture content, percent (absolute))	-
Cl-9.1 S.No-(1), vi (Internal bond strength, N/mm2, Min)	-
Cl-9.1 S.No-(1), vii,a (After cyclic test)	-
Cl-9.1 S.No-(1), vii,b (After accelerated water resistance test)	-
Cl-9.1 S.No-(1), x, (Screw withdrawal strength, ????????, Min)	-
Cl-9.1 S.No-(1), xv (Resistance to crack)	-
Cl-9.1 S.No-(1), xvi (Resistance to a cigarette burn)	-
Cl-12 (Marking)	-
Cl-9.1 S.No-(1), viii (Modulus of rupture, N/mm2 , Min)	-
Cl-9.1 S.No-(1), ix (Modulus of elasticity, N/mm2 , Min)	-
Cl-9.1 S.No-(1), xi (Formaldehyde content (Fc), mg/100 g for oven dry board)	-

-
Sample size required: One board for all tests; Facility available at CL: (1) Dimensions (Length,Width ,Thickness, Squareness,Edge Straightness) (2) Moisture Content, (3) Density (4)Linear expansion (5) Internal bond strength (6)Screw withdrawal strength (7) Water Absorption Test (8) Resistance to Crack (9) Resistance to Cigarette burn, (10) Modulus of rupture & Modulus of elasticity Sample Test Parameter not available in CL "Clauses 9.1 and 10.2.2 Linear expansion, Internal bond Strength (After cyclic test, After accelerated water resistance test),. Resistance to steam/water vapours,Resistance to stain,Abrasion resistance." SIZE: One Board For All Tests Sample Size without dimensional measurements: Length-1200 mm, width-1200

6186

Standard Testing and Compliance, Faridabad

6178726

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6.0(Marking)	-	2000	15% discount to BIS
7.0(Construction)	-	5000	15% discount to BIS
8.0(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9.0(Provision for earthing)	-	1000	15% discount to BIS
10.0(Terminals)	-	1000	15% discount to BIS
11.0(External & Internal Wiring)	-	2000	15% discount to BIS
12.0(Protection against electric shock)	-	3000	15% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14.0(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17.0(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Exclusion: Electromechanical contact system (4.11.6), UV Radiation (cl.4.24, IS 10322(Part-1):2014, cl 17 photometric test.

6187

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

Footwear

61125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	200	-
Cl No.4.3(Whole Footwear)	-	0	-
4.3.1(Insole)	-	200	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1650	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1650	-
4.3.6(Energy Absorption at Seat Region)	-	1050	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	900	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	550	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	900	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	900	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	3500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	900	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	550	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1650	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1650	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	3500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	900	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	2500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1700	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1700	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	550	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1250	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	45000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1800	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1900	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	450	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1650	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1650	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	900	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	900	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	900	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	2025	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	300	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	900	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1050	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	300	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	2025	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1050	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1650	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1650	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	3500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	900	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	2500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1650	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1050	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1650	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	45000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1200	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	900	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	550	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	900	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	900	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	900	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	550	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	900	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1650	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	3500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	900	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	2500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	1250	-
Clause 4.4, Table 2 iii)(Tear strength)	-	900	-
Cl No.4.1(Sampling and Conditioning)	-	-	-
Cl No.4.2(Construction)	-	-	-
Cl No.4.3(Whole Footwear)	-	-	-
4.3.1(Insole)	-	-	-
4.3.2(Toe spring height)	-	-	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
4.3.6(Energy Absorption at Seat Region)	-	-	-
4.3.7(Complete Shoe Flexing)	-	-	-
4.3.9(Slip Resistance)	-	-	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	-	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	-	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	-	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	-	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	-	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	-	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	-	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	-	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	-	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	-	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	-	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	-	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	-	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	-	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	-	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	-	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	-	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	-	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	-	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	-	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	-	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	-	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	-	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	-	-
Cl No . 5(MARKING AND PACKING)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Clause 4.2 - 4.2.1(Construction)	-	-	-
Clause 4.2 - 4.2.2(Construction)	-	-	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	-	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	-	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	-	-
Clause 4.4, Table 1 ii)(Tear strength)	-	-	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	-	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	-	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	-	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.5, Table 3 i)(Tear strength)	-	-	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	-	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.6, Table 4 i)(Thickness)	-	-	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	-	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	-	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	-	-
Clause 4.7, Table 5 i)(Thickness)	-	-	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	-	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	-	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	-	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	-	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	-	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	-	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	-	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	-	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	-	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	-	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	-	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	-	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	-	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	-	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	-	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	-	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	-	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	-	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	-	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	-	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	-	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	-	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	-	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	-	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	-	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	-	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	-	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	-	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	-	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	-	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	-	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	-	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	-	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	-	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	-	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	-	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	-	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	-	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	-	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	-	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	-	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	-	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	-	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	-	-
Clause 4.4, Table 2 iii)(Tear strength)	-	-	-

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 4.3.8 Washability

6188

BIS, Eastern Regional Laboratory (ERL)

None

IS 10805 (2022)

Foot-Valves, Reflux Valves or NonReturn Valves and Bore Valves to be Used in Suction Lines of Agricultural Pumping Systems â Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions)	-
5.3 (Flange Dimensions)	-

-
Mechanical: Test facility not available for Seat Test, Housing Test, K-value test, frictional loss. Declaration required for nominal size of pipe and valve.

6189

TUV INDIA PVT LTD, PUNE

7139026

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	15000	N/A
5.2(Message Readability)	-	15000	N/A
5.1(Inputting of text)	-	15000	NA
5.2(Message Readability)	-	15000	NA
6(Marking)	-	15000	NA

31 Dec, 2026

-
-

6190

TUV INDIA PVT LTD, PUNE

7139026

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1500	N/A
8.1.1(Protection against live parts in all positions)	-	1500	N/A
8.1.2(Protection against live parts in openings)	-	1500	N/A
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	N/A
8.1.4(Protection against live parts against protective impedance)	-	1500	N/A
10.1(Power input)	-	1500	N/A
10.2(Current input)	-	1500	N/A
11.1(General)	-	0	N/A
11.2(General)	-	0	N/A
11.3(Heating)	-	10000	N/A
13.1(General)	-	0	N/A
13.2(Leakage current at operating temperature)	-	1500	N/A
13.3(Electric Strength at operating temperature)	-	1500	N/A
14(Transient Over Voltages)	-	1500	N/A
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	N/A
15.3(Humidity Test)	-	14400	N/A
16.0(General)	-	0	N/A
16.1(General)	-	0	N/A
16.2(Leakage Current (after Clause 15))	-	1500	N/A
17(Over Load Protection of Transformers and associated circuits)	-	1500	N/A
19(Abnormal Operation)	-	3000	N/A
20(Stability test)	-	1000	N/A
21(Mechanical Strength Test)	-	1500	N/A
22(Construction verification related test)	-	1500	N/A
23(General)	-	1500	N/A
25(Supply connection and external flexible cords)	-	1500	N/A
26(Terminals for external conductors)	-	1500	N/A
27(Provision for earthing)	-	1500	N/A
28(Screw test and connections)	-	1500	N/A
29(clearance, creepage distances and solid insulation)	-	1500	N/A
30.1(Ball pressure test)	-	1000	N/A
30.2(Glow Wire Test)	-	1000	N/A
30.2(Needle Flame Test)	-	1000	N/A
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	N/A
15.2(Spillage Test)	-	1500	N/A

31 Dec, 2026

-
Included w.e.f. 28 June 2018. Excluding: EMI/EMC (Cl.19.11.4.2), Component (Cl.24) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

6191

TUV INDIA PVT LTD, PUNE

7139026

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

60000 View breakup
Rs. 1,10,000/- for Electronic Games (Video), Optical disc Players with built in amplifier of input power 200W and above, Amplifier of input power 2000W and above, Electronic musical system with input power 200W and above, Power adaptors for audio, Video and similar electronic apparatus, Plasma/ LED/LCD television screen upto 32 inch, Plasma/ LED/LCD television screen above 32 inch and upto 70 inch.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	N/A
7(Heating under normal operating conditions)	-	7000	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	3000	N/A
9(Electric shock hazard under normal operating conditions)	-	3000	N/A
10(Insulation requirements)	-	15000	N/A
11(Fault conditions)	-	4000	N/A
12(Mechanical strength)	-	3000	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	N/A
15(TERMINALS)	-	4000	N/A
16(External flexible cords)	-	3000	N/A
17(Electrical connections and mechanical fixings)	-	3000	N/A
19(Stability and mechanical hazards)	-	3000	N/A
20(Resistance to fire)	-	3000	N/A

31 Dec, 2026

-
Revised Version Included w.e.f. 28 June 2018 : Excluding: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Printed Boards (Cl.13.5), Component test (Cl.14), External flexible cord (Cl.16.1 & Cl.16.3), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18) and Sub- contracting of Vibration test (Cl.12.1.3) to M/s Reliable Analytical Laboratories Pvt. Ltd., Thane.

6192

TUV INDIA PVT LTD, PUNE

7139026

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
Rs. 80,000/- for Laptop/Notebook/ Tablets; Rs. 1,00,000/- for Visual Display Units/Video Monitors upto 32 inch; Rs. 1,10,000/- for Visual Display Units/Video Monitors above 32 inch and upto 70 inch; Rs. 85,000/- for Printers/Plotters for A4 and Legal size paper; Rs. 95,000/- for Printers/Plotters for A3 and above size paper; Rs. 80,000/- for Scanners (Battery Operated); Rs. 98,000/- for Scanners (Mains Operated); Rs. 50,000/- for Wireless Keyboard; Rs. 80,000/- for Telephone Answering Machine; Rs. 85,000/- for Set Top Box; Rs. 1,10,000/- for Automatic Data Processing Machine; Rs. 1,00,000/- for Copying Machine/ Duplicators for A4 and Legal size paper; Rs. 1,05,000/- for Copying Machine/ Duplicators for A3 and above size paper ; Rs. 78,000/- for Mail Processing Machine/Postage Machine/Franking Machines; Rs. 75,000/- for Power Adapters for IT Equipments, Mobile Phones, Cash Registers, Point of Sale machine, Smart Card Readers, Passport Readers. The following products included in the existing scope w.e.f. 28 June 2018 : Rs. 1,108000/- for CCTV Cameras/CCTV Recorders, USB Driven Barcode Readers, Barcode Scanners, Iris Scanners, Optical Fingerprint Scanners, Smart Watches.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	N/A
1.7(Markings and instructions)	-	1000	N/A
2.1(Protection from electric shock and energy hazards)	-	1500	N/A
2.2(SELV circuits)	-	1500	N/A
2.3(TNV circuits)	-	1500	N/A
2.4(Limited current circuits)	-	1500	N/A
2.5(Limited power sources .)	-	1500	N/A
2.6(Provisions for earthing and bonding)	-	1500	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	1500	N/A
2.8(Safety interlocks)	-	2000	N/A
2.9(Electrical insulation)	-	36000	300/ Hour
2.10(Clearances, creepage distances and distances through insulation)	-	1500	N/A
3.1(General)	-	1000	N/A
3.2(Connection to a mains supply)	-	1500	N/A
3.3(Wiring terminals for connection of external conductors)	-	2000	N/A
4.1(Stability)	-	1500	N/A
4.2(Mechanical strength)	-	1500	N/A
4.3(Design and construction)	-	1500	N/A
4.4(Protection against hazardous moving parts)	-	1500	N/A
4.5(Thermal requirements)	-	4000	N/A
4.6(Openings in enclosures)	-	1500	N/A
4.7(Resistance to fire)	-	1500	N/A
5.1(Touch current and protective conductor curren)	-	1500	N/A
5.2(Electric strength)	-	1500	N/A
5.3(Abnormal operating and fault conditions)	-	4000	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1500	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1500	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	1500	N/A
7.1(General)	-	1500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	1500	N/A

31 Dec, 2026

-
Excluding following tests: Components (Cl. 1.5), Tests on coated printed boards and coated components (Cl. 2.10.8), Power Supply Cords (Cl. 3.2.5.1), Cathode Ray Tubes (Cl. 4.2.8), High Pressure Lamps (Cl. 4.2.9), Batteries (Cl. 4.3.8), Oil and grease(Cl. 4.3.9), Dust Powders, liquids and gases (Cl. 4.3.10), Flammable liquids (Cl. 4.3.12), Ionizing radiation (Cl.4.3.13.2) Effect of UV radiation on materials (Cl. 4.3.13.3/ Annex Y) Human exposure to UV radiation (Cl.4.3.13.4) Laser including LED (Cl.4.3.13.5), Bottom of the fire enclosure/ Hot flaming oil test (Cl.4.6.2 & Annex-A3), Evaluation of Integrated Circuit (IC) Current Limiters (Annex CC).

6193

TUV INDIA PVT LTD, PUNE

7139026

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	1500	N/A
4.7(Marking & instructions)	-	1500	N/A
5.1(Protection against shock and energy hazards)	-	1500	N/A
5.2(Requirement of auxiliary circuits)	-	1500	N/A
5.3(Protective earthing and bonding)	-	1500	N/A
5.4(AC and DC power isolation)	-	1500	N/A
5.5(Over current and earth fault condition)	-	1500	N/A
5.6(Safety interlocks)	-	5000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1500	N/A
6.1(Wiring, connections and supply)	-	1500	N/A
6.2(Connection to power)	-	1500	N/A
6.3(Wiring terminals for external power conductors)	-	1500	N/A
7.1(Enclosure)	-	1500	N/A
7.2(STABILITY)	-	1500	N/A
7.3(MECHANICAL STRENGTH)	-	1500	N/A
7.4(Construction details)	-	1500	N/A
7.5(Resistance to fire)	-	1500	N/A
7.7(Temperature rise)	-	7000	N/A
8.1(General procision for earth leakage)	-	1500	N/A
8.2(Electric Strength)	-	1500	N/A
8.3(Abnormal operating and fault conditions)	-	7000	N/A
9.0(Connection to telecommunication networks)	-	1500	N/A
7.6(Battery location)	-	1500	NA

31 Dec, 2026

-
Excluding testing of Components (Clause 1.5)

6194

TUV INDIA PVT LTD, PUNE

7139026

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	N/A
9(Terminals)	-	3000	N/A
10(PROVISION FOR EARTHING)	-	1500	N/A
11(MOISTURE RESISTANCE)	-	20000	N/A
12(Electric Strength)	-	1500	N/A
13(Thermal endurance test for winding of ballasts)	-	5000	N/A
14(Fault conditions)	-	5000	N/A
15(Transformer heating)	-	5000	N/A
16(Construction)	-	2000	N/A
17(Creepage distance and clearances)	-	3000	N/A
18(Screws, current carrying parts and connections)	-	2000	N/A
19(Resistance to heat, fire and tracking)	-	3000	N/A
20(Resistance to corrosion)	-	2000	N/A
8(Protection against accidental contact with live parts)	-	2000	N/A

31 Dec, 2026

-
-

6195

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	1000	-
7.3(Tolerance on thickness of insulation )	-	1000	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1000	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	1000	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1000	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1000	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	2000	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	2000	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional))	-	1000	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1000	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1000	-
10.1 d) iii)(Carbon Black Content)	-	2000	-

11 Mar, 2028

-
-

6196

Standard Testing and Compliance, Faridabad

6178726

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

rope lights

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	15% discount to BIS
21.5(Classification of Luminaires')	-	0	15% discount to BIS
21.6(Marking)	-	2000	15% discount to BIS
21.7(Construction)	-	5000	15% discount to BIS
21.8(Creepage Distance and Clearances)	-	2000	15% discount to BIS
21.10(Terminals)	-	1000	15% discount to BIS
21.11(External & Internal Wiring)	-	2000	15% discount to BIS
21.12(Protection against electric shock)	-	3000	15% discount to BIS
21.13(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
21.14(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
21.15(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
21.16(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
21.7.1(General)	-	0	15% discount to BIS
21.7.3(Terminals and supply connections)	-	0	15% discount to BIS
21.7.4(Control units)	-	0	15% discount to BIS
21.7.5(Mechanical strength)	-	0	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

6197

Standard Testing and Compliance, Faridabad

6178726

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

lighting chains

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	15% discount to BIS
20.5(Classification of Luminaires')	-	0	15% discount to BIS
20.6(Marking)	-	2000	15% discount to BIS
20.7(Construction)	-	5000	15% discount to BIS
20.8(Creepage Distance and Clearances)	-	2000	15% discount to BIS
20.10(Terminals)	-	1000	15% discount to BIS
20.11(External & Internal Wiring)	-	2000	15% discount to BIS
20.12(Protection against electric shock)	-	3000	15% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
20.14(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

6198

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

51000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	-
5(Construction)	-	5000	-
6.3(Cooling Capacity Test)	-	8000	-
6.4(Maximum Operating Condition Test)	-	5000	-
6.5(Pull Down Test)	-	5000	-
9(Maximum Power Consumption Test)	-	5000	-
10(Annual Energy Consumption Test)	-	8000	-
11(Storage Capacity Test)	-	5000	-
13(Functional Test)	-	2000	-
14 a)(Protection against electric shock)	-	2000	-
14 b)(High voltage (electric strength) test)	-	2000	-
14 c)(Leakage current tests)	-	2000	-
14 d)(Provision for earthing)	-	2000	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-

20 Jun, 2028

-
Included w.e.f 27.03.2025

6199

Standard Testing and Compliance, Faridabad

6178726

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

Flood Light

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6.0(Marking)	-	2000	15% discount to BIS
7.0(Construction)	-	5000	15% discount to BIS
8.0(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9.0(Provision for earthing)	-	1000	15% discount to BIS
10.0(Terminals)	-	1000	15% discount to BIS
11.0(External & Internal Wiring)	-	2000	15% discount to BIS
12.0(Protection against electric shock)	-	3000	15% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14.0(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17.0(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

6200

MSME TESTING CENTRE, CHENNAI

6106704

IS 9537 : Part 8 (2003)

Conduits for electrical installations - Specification: Part 8 rigid non - Threadable conduits of aluminium alloy

Aluminum Alloy Conduit

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(type test)	-	0	Testing charges applicable per sample per size.
4.2(ambient temperature)	-	0	Testing charges applicable per sample per size.
4.5(for rigid conduits, lengths)	-	0	Testing charges applicable per sample per size.
4.5(for pliable and flexible conduit coils)	-	0	Testing charges applicable per sample per size.
7(DIMENSIONS)	-	4000	Testing charges applicable per sample per size.
8(CONSTRUCTION)	-	1000	Testing charges applicable per sample per size.
9.2(Bending Test)	-	1000	Testing charges applicable per sample per size.
9.3(Compression Test)	-	1000	Testing charges applicable per sample per size.
clause No. 9.1(replacement)	-	1000	Testing charges applicable per sample per size.
clause No. 12(ELECTRICAL CHARACTERISTICS)	-	1000	Testing charges applicable per sample per size.

31 Dec, 2026

-
Included w.e.f. 02.04.2024

6201

MSME TESTING CENTRE, CHENNAI

6106704

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

All Type

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	200	-
6.4(Skin Formation)	-	0	-
6.5(Thinning Properties)	-	0	Sample along with suitable thinner 1 L can be submitted
6.6(Application Properties)	-	0	-
6.8(Lead Restriction)	-	800	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	500	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	500	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	1000	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	200	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	200	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	200	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	200	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	200	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	200	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	200	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	200	-
6.9 Table 2 (6) Colour , (Finishing))	-	500	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	2000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	200	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	-

31 Dec, 2026

-
Included w.e.f. 02.04.2024 Exclusion: Cl.6.7.1.3 (QUV appratus)

6202

MSME TESTING CENTRE, CHENNAI

6106704

IS 653 (1992)

Linoleum Sheets And Tiles

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3-01-01(width of sheet)	-	200	-
5.3-01-02(Tolerance to tile size)	-	200	-
5.3-01-03(Thickness)	-	200	-
7("Squareness (for tiles only")	-	500	-
7(Seasoning (for plain linoleum only))	-	400	-
7(Residual Indentation)	-	1000	-
7(Flexibility)	-	500	-
7(Water absorption)	-	1000	-
7(Ageing)	-	1500	-
7("Colour fastness to day light")	-	1000	-

31 Dec, 2026

-
Included w.e.f. 28.03.2024

6203

MSME TESTING CENTRE, CHENNAI

6106704

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	0	OK
Table 1(CLASS II)	-	0	OK
5.2.2.1(General)	-	0	OK
5.2.2.2(Height of upper)	-	100	OK
5.3.2.1(Construction)	-	0	OK
5.3.1.2(Upper/outsole bond strength)	-	400	OK
5.3.2.2(Leakproofness)	-	300	OK
5.3.2.3(Specific ergonomic features )	-	0	OK
5.3.4.1(Slip resistance)	-	500	OK
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	0	OK
5.3.4.3(Slip resistance on steel floor with glycerine )	-	0	OK
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	0	OK
5.4.2.2(Thickness )	-	100	OK
5.4.2.3(Tear strenth)	-	400	OK
5.4.2.4(Tensile properties)	-	400	OK
5.4.2.5(Flexing resistance )	-	500	OK
5.4.2.6(Water vapour permeability and coefficient )	-	600	OK
5.5.2.4(pH value )	-	200	OK
5.5.2.5(Chromium VI content )	-	300	OK
5.4.2.8(Hydrolysis)	-	0	OK
5.5.2.1(Tear strength )	-	400	OK
5.5.2.2(Abrasion resistance )	-	500	OK
5.5.2.3(Water vapour permeability and coefficient )	-	0	OK
5.6.2.1(Tear strength )	-	0	OK
5.6.2.2(pH value )	-	0	OK
5.6.2.3(Chromium VI content )	-	0	OK
5.7.2.1(Insole and insock )	-	0	OK
5.7.2.2(Insole and insock )	-	0	OK
5.7.2.3(Water absorption and desorption )	-	500	OK
5.7.4.1(Abrasion resistance )	-	300	OK
5.7.4.2(Abrasion resistance )	-	300	OK
5.7.2.5(Chromium VI content )	-	0	OK
5.8.2.1(Outsole)	-	0	OK
5.8.1.1(Thickness )	-	100	OK
5.8.1.2(Cleated area )	-	0	OK
5.8.1.3(Cleat height)	-	0	OK
5.8.2.2(Tear strength )	-	400	OK
5.8.2.3(Abrasion resistance )	-	300	OK
5.8.2.4(Flexing resistance )	-	500	OK
5.8.2.5(Hydrolysis )	-	500	OK
5.8.2.6(Interlayer bond strength )	-	400	OK
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	300	OK
6.2.1.2(Construction)	-	0	OK
6.2.1.3(Dimensions )	-	0	OK
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	300	OK
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	0	OK
6.2.2.1(Conductive footwear)	-	0	OK
6.2.2.2(Antistatic footwear)	-	500	OK
6.2.3.1(Heat insulation of sole complex )	-	500	OK
6.2.3.2(Cold insulation of sole complex)	-	500	OK
6.2.2.4(Energy absorption of seat region )	-	400	OK
6.2.2.5(Water resistance )	-	0	OK
6.2.2.6(Ankle protection)	-	0	OK
6.2.7.1(Cut resistance foot wear)	-	500	OK
6.2.7.2(Cut resistance foot wear)	-	0	OK
6.3.2.2(Upper- water penetration)	-	300	OK
6.4.2.1(Resistance to hot contact)	-	300	OK
6.4.2.2(Resistance to fuel oil)	-	400	OK
5.2.2.3(Seat region)	-	0	OK
5.4.2.1(Upper)	-	0	OK
5.4.2.7(pH value )	-	0	OK
5.4.2.9(Chromium VI content )	-	0	OK
6.2.2.3(Electrically insulating footwear )	-	500	OK
6.2.7.3(Resistance to cutting)	-	0	OK
6.2.7.4(Pentration resistance)	-	0	OK
6.2.1.1(Metallic anti-penetration insert )	-	0	OK

31 Dec, 2026

-
Included w.e.f. 28.03.2024 Exclusion: Cl.6.2.1.4 (Flex resistance of penetration-resistant inserts ), Cl.5.3.2.5 (Innocuousness )

6204

MSME TESTING CENTRE, CHENNAI

6106704

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	0	-
5.3.1.1 Table-2(Construction)	-	0	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	400	-
Table-2(Strength)	-	0	-
5.3.2.1 Table-2(General)	-	0	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	0	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	400	-
5.3.2.4 Table-2(Compression)	-	400	-
5.3.3 Table-2(Leak Proofness)	-	300	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	500	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	500	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	500	-
5.4.1 Table-2(General)	-	0	-
5.4.2 Table-2(Thickness)	-	100	-
5 4 3 Table-2(Tear Strength)	-	400	-
5.4.4 Table-2(Tensile Properties)	-	400	-
5.4.5 Table-2(Flexing Resistance)	-	500	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5 4.7 Table-2( )	-	200	-
5 4.8 Table-2(Hydrolysis)	-	500	-
5.4 9 Table-2(Chrome VI)	-	300	-
5.5.1 Table-2(Tear Strength)	-	400	-
5.5.2 Table-2(Abrasion Resistance)	-	500	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	0	-
5.5.4 Table-2(pH Value)	-	200	-
5.5.5 Table-2(Chrome VI)	-	300	-
5.6.1 Table-2(Tear Strength)	-	0	-
5.6.2 Table-2(pH Value)	-	200	-
5.6.3 Table-2(Chromium VI)	-	300	-
5.7.3 Table-3(Water Absorption &)	-	500	-
Table-3(Desorption)	-	0	-
5.8.6 Table-2(Interlayer BondStrength)	-	400	-
6.2.1 Table-I8(Penetration Resistance)	-	300	-
6.2.2.1 Table-18(Electrical Properties)	-	500	-
6.2.2.2 Table-18(Antistatic Footwear)	-	500	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	500	-
6.2.3.2 Table-18(Cold Insulated)	-	500	-
6.2.4 Table-18(Energy Absorption of seat region)	-	400	-
6.2.5 Table-18(Water Resistance)	-	200	-
6.2.7 Table-18(Ankle Protection)	-	500	-
6.2.8 Table-18(Cut Resistance)	-	500	-
6.3 Table-18(Water Penetration & Absorption)	-	300	-
6.4.1 Table-18(Resistance to Hot Contact)	-	300	-
6.4.2 Table-18(Resistance to Fuel oil)	-	400	-
8.2.1(Conductive footwear)	-	500	-
8.2.2(Antistatic footwear)	-	500	-

31 Dec, 2026

-
Included w.e.f. 28.03.2024 Excluding Footwear with electrical insulating

6205

MSME TESTING CENTRE, CHENNAI

6106704

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

Insulation A,C,D/Sheath ST1,ST2,ST3/Cat 01,02,FR/AYY

20000 View breakup
Type Test: Rs.10000/- (1 core), Rs.11000/- (2 core), Rs.13000/- (3 core), Rs.15000/- (3 1/2, 4 core) Optional Tests Cold Bend test – Rs 1500 /- Cold Impact – Rs 1500 /-Additional Ageing Test – Rs 1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3000	-
10.4(Flammability test- Unaffected portion)	-	500	-
10.4(Flammability test-Burning after flame removal)	-	500	-
table 1 e) 3) (IR constant- max. Temp)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	250	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	250	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	250	-
10.2(HV (room temperature))	-	1000	-
10.1(HV (water immersion))	-	750	-
10.1(HV (water immersion))	-	750	-
10.6(Halogen evolution)	-	5000	-
10.7(Temperature index)	-	5000	-
10.5(Oxygen index)	-	5000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	500	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	625	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	625	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	625	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	625	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	625	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	625	-
Table 1 iii) c) 3)(Elongation variation)	-	625	-
Table 1 iii) c) 3)(TS variation)	-	625	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	625	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	625	-
8.3(Thickness of Sheath)	-	500	-
5.3(Thickness of Insulation)	-	500	-
9.1(Ovality)	-	500	-
9(Overall dimensions)	-	500	-
4.2(Conductor resistance test)	-	500	-
4.1(Wrapping test (for Al))	-	400	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
4.1(Annealing test (for copper))	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	500	-
8.3(Minimum thickness of Sheath)	-	250	-
8.3(Avarage thickness of Sheath)	-	250	-
5.3(Minimum thickness of insulation)	-	250	-
5.3(Avarage thickness of insulation)	-	250	-
11.1(Durability)	-	500	-
13(Cable code)	-	500	-
11.2(Legibility)	-	500	-
11(Identification)	-	500	-
Table 1(Category Code)	-	500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	500	-
5.2(Application )	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	500	-
12(CONSTRUCTION Core Identification)	-	500	-
8.1(Sheath Material )	-	500	-
7(Binder Tape)	-	500	-
6.2(Filler)	-	500	-
6.1(Filler)	-	500	-
5.1(Insulation)	-	500	-
4.4(Joints in Conductor)	-	500	-
4.4(Joints in Conductor)	-	500	-
4.1(Conductor - Material)	-	500	-
4.1(Conductor - Material)	-	500	-
12.0(Core identification)	-	500	-
4, IS 8130(Construction of conductor)	-	500	-
Table 2, IS 8130(No fo wire in a conductor)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	500	-
Table 4(Copper purity test)	-	660	-
5.4(Mechanical properties before and after ageing)	-	2500	-

31 Dec, 2026

-
Exclusion: Cl.10.8 (smoke density rating), Cl.10.3 (spark test)

6206

MSME TESTING CENTRE, CHENNAI

6106704

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE Insulated/ST2 PVC Sheathed/A2XFY/A2XWY/FR

22000 View breakup
Type test: Rs.11000/- or Rs.6000/- for two core, Rs.13000/- or Rs.7000/- for three core, Rs.15000/- or Rs.8500/- for 3.5 & 4 core, Optional Test Cold bend test – Rs 1500 /- Cold impact test – Rs 1500 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	400	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	400	-
15.1 a) iii)(Wrapping test (for aluminium))	-	400	-
15.1 a) iv)(Resistance test - Main conductor)	-	250	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	250	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	2500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	500	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	625	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	625	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	625	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	625	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	-
16.2(HIGH VOLTAGE TEST )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	500	-
16.9(Oxygen Index Test)	-	5000	-
16.14(Temperature Index)	-	5000	-
17.1(Manufacturer'. identification)	-	500	-
17.2(cable Indentification )	-	500	-
17.3(cable Code )	-	500	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	625	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	625	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	625	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	625	-
Table 4(Copper purity test)	-	660	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
3(CONDUCTOR: MATERIALS)	-	500	-
4(INSULATION : MATERIALS)	-	500	-
5.1(FILLER AND INNER SHEATH)	-	500	-
5.2(FILLER AND INNER SHEATH)	-	500	-
6(ARMOURING)	-	500	-
7(OUTER SHEATH)	-	500	-
8.1(CONDUCTOR: CONSTRUCTION)	-	500	-
8.2(PROTECTIVE BARRIER)	-	500	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	500	-
9.1(Insulation Applied by extrusicn)	-	500	-
9.2(Thickness of Insulation - Average)	-	500	-
9.3(Thickness of Insulation - Minimum)	-	500	-
9.4(Application of Insulation)	-	500	-
10.1(Core Identification)	-	500	-
10.2(Core Identification- Neutral)	-	500	-
10.3(Core Identification by number )	-	500	-
10.4(Core Identification by number - Neutral )	-	500	-
11(LAVING UP OF CORES)	-	500	-
12.1 & 12.2(Inner sheath : Application)	-	500	-
12.3(Thickness of Inner Sheath)	-	500	-
13.1(Armouring: Application)	-	500	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(Armouring: Direction of Lay )	-	500	-
13.2(Type of armour )	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(Armour: Joint)	-	500	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	500	-
14.2(Colour of outer sheath)	-	500	-
14.3(Thickness of outer sheath - AVERAGE)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	500	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-

31 Dec, 2026

-
-

6207

MSME TESTING CENTRE, CHENNAI

6106704

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

1100V/Type A/C/ST1/ST2/AYFY/AYWY/CAT01

15000 View breakup
Type test: Rs.14000/- (2 core), Rs.17000/- (3 core), Rs.19000/- (3 1/2, 4 core) Optional Tests Cold Bend test – Rs 1500 /- Cold Impact – Rs 1500 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	500	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	500	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
6.1(MATERIALS : ARMGURING)	-	500	-
6.2(MATERIALS : ARMGURING)	-	500	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	500	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	500	-
8.1(CONSTRUCTION : CONDUCTOR)	-	500	-
8.2(CONSTRUCTION : CONDUCTOR)	-	500	-
9.1(INSULATION )	-	500	-
9.2(INSULATION : Thickness of Insulation)	-	250	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	250	-
9.4(INSULATION : Application of Insulation)	-	500	-
10.1(CORE IDENTIFICATION)	-	500	-
10.2(CORE IDENTIFICATION)	-	500	-
10.3(CORE IDENTIFICATION)	-	500	-
10.3.1(Arrangement of Marking)	-	500	-
11.1(LAYING UP OF CORES)	-	500	-
11.2(LAYING UP OF CORES)	-	500	-
12.1(INNER SHEATH)	-	500	-
12.2(INNER SHEATH)	-	500	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
13.1.1(ARMOURING : Application)	-	500	-
13.1.2(Armouring: Coverage )	-	500	-
13.1.3(ARMOURING : Direction of lay )	-	500	-
13.1.4(ARMOURING : Application)	-	500	-
13.2(ARMOURING : Type of Armour)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	500	-
13.5.1(ARMOURING : Resistance)	-	250	-
13.5.2(ARMOURING : Resistance)	-	250	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(OUTER SHEATH)	-	500	-
14.2(OUTER SHEATH)	-	500	-
14.3(OUTER SHEATH : Colour )	-	500	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	400	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	400	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	400	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	250	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	250	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	250	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	250	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	250	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	250	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	625	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	625	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	625	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	625	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	625	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	625	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	625	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	625	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	500	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	500	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	500	-
15.1 d)6)(Heat shock test- Insulation )	-	500	-
15.1 d)6)(Heat shock test- sheath )	-	500	-
15.1 d)7)(Thermal stability- insulation )	-	500	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 e)(Insulation resistance test : IR Constant )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	1500	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	500	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	500	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1500	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1500	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	5000	-
16.1(Temperature Index)	-	5000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	500	-
17.2(IDENTIFICATION : Cable Identification)	-	500	-
17.2.1(IDENTIFICATION : Cable Identification)	-	500	-
17.3(IDENTIFICATION : Cable Code)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1000	-
16.4(Flammability Test- Un affected portion)	-	500	-
16.4(Flammability Test- Period of Burning)	-	500	-
9.3(Minimum Thickness of Reduce core insulation)	-	500	-
9.2(Thickness of Reduce core insulation)	-	500	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	500	-
Table 4(Copper purity test)	-	660	-

31 Dec, 2026

-
Exclusion: Cl.16.10 smoke density test, Cl.16.8 (Test for specific optical density & smoke)

6208

MSME TESTING CENTRE, CHENNAI

6106704

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

13500 View breakup
-

Clause No.	Exclusion	Remark
4,Table 1(Class I, IS 15298)	-	NIL
4,Table 1(Class II, IS 15298)	-	NIL
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	NIL
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	NIL
5.2.3, Table 10 ,Design A(Seat Region)	-	NIL
5.3.1.1(Construction)	-	NIL
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	NIL
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	NIL
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	NIL
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	NIL
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	NIL
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	NIL
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	NIL
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	NIL
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	NIL
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	NIL
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	NIL
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	NIL
5.4.1,Table 10(General)	-	NIL
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	NIL
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	NIL
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	NIL
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	NIL
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	NIL
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	NIL
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	NIL
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	NIL
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	NIL
5.6(Tongue - IS 15298 Part 2 )	-	NIL
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	NIL
5.6.2(Ph Value ; ISO 20344,6.9)	-	NIL
5.6.3(Chromium VI content; ISO 17075)	-	NIL
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	NIL
5.7.2(Ph Value ; ISO 20344,6.9)	-	NIL
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	NIL
5.7.4.1(Insole ; ISO 20344,7.3 )	-	NIL
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	NIL
5.8.1.2(Cleated area)	-	NIL
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	NIL
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	NIL
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	NIL
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	NIL
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	NIL
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	NIL
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	NIL
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	NIL
6.2.1.2(Consruction)	-	NIL
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	NIL
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	NIL
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	NIL
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	NIL
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	NIL
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	NIL
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	NIL
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	NIL
6.2.6.1(Construction)	-	NIL
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	NIL
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	NIL
6.2.8.1(Design)	-	NIL
6.2.8.2(Construction)	-	NIL
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	NIL
6.2.8.4(Penetration Resistance)	-	NIL
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	NIL
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	NIL
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	NIL
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	NIL

31 Dec, 2026

-
Included w.e.f. 28.03.2024 Exclusion: Cl.6.2.1.4 (Flex resistance of penetration -resistant insert ; ISO 20344,5.9), Cl.5.3.6 (Innocuousness)

6209

MSME TESTING CENTRE, CHENNAI

6106704

IS 13995 (1995)

Unlined moulded rubber boots - Specification

Unlined moulded rubber boots

2700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	100	OK
5.1.6(Design)	-	0	OK
5.1.5(Flexing resistance of upper)	-	600	OK
5.1.4(Resistance to dry heat ageing )	-	500	OK
5.1.3(Tear Strength)	-	300	OK
5.1.2(Tensile Strength (after ageing))	-	800	OK
5.1.1(Tensile Strength (before ageing))	-	300	OK
4.1(Thickness )	-	100	OK
6, 6.1(Marking)	-	0	OK

31 Dec, 2026

-
Included w.e.f. 28.03.2024

6210

MSME TESTING CENTRE, CHENNAI

6106704

IS 11544 (1986)

Specification for slipper, rubber

3800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	100	OK
3.2.5(Type of Thread)	-	400	OK
3.2.4(Picks per cm)	-	100	OK
3.2.4(End per cm)	-	100	OK
3.2.4(Mass per unit area)	-	300	OK
3.2(Flexural endurance)	-	1500	OK
3.2(Hardness after ageing)	-	500	OK
3.2(Hardness (IRHD))	-	300	OK
3.2(Relative density )	-	300	OK
3.1(Shape & Design)	-	100	OK
3.2.2(Bottom Filling Material)	-	0	OK
3.2.4.1(Weave of fabrics)	-	0	OK
3.2.7(vulcanized process)	-	0	OK
3.2.8(Workmanship and Finish -)	-	0	OK
3.2.9(Preservation -)	-	100	OK
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	0	OK

31 Dec, 2026

-
Included w.e.f. 28.03.2024 Exclusion: 3.2.4 (Colour fasntess to washing)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number