BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6151

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

Footwear

82500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	200	-
Cl-5(Design)	-	200	-
Cl-6(Size and Fittings)	-	200	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1650	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1050	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1650	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	1050	-
Cl.7.1.3(Complete Shoe Flexing)	-	1500	-
Cl.7.1.5(Slip Resistance)	-	2500	-
Cl.7.1.6(Heel Drop)	-	300	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1500	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	900	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	550	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1500	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	900	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	1500	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	900	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	0	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	2025	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	0	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	900	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	1250	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1500	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	1500	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	3500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	1500	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	900	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	2025	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	550	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	1500	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	1500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	900	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	1050	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	2025	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	1050	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	2500	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1650	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1650	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	3500	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	900	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	900	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	0	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1500	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1500	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	900	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	2500	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	900	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	900	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1350	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1500	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	1500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	1000	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	1000	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1500	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	1000	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	1250	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	1250	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1900	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	450	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	5500	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Cl-7.12.2(PVC is present in sports shoe)	-	1200	-
Cl- 8.1(Marking)	-	300	-
Cl-6(Size and Fittings)	-	-	-
Cl-5(Design)	-	-	-
Cl-6(Size and Fittings)	-	-	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	-	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	-	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	-	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	-	-
Cl.7.1.3(Complete Shoe Flexing)	-	-	-
Cl.7.1.5(Slip Resistance)	-	-	-
Cl.7.1.6(Heel Drop)	-	-	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	-	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	-	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	-	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	-	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	-	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	-	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	-	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	-	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	-	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	-	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	-	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	-	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	-	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	-	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	-	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	-	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	-	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	-	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	-	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	-	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	-	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	-	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	-	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	-	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	-	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	-	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	-	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	-	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	-	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	-	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	-	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	-	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	-	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	-	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	-	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	-	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	-	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	-	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	-	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	-	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	-	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	-	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	-	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	-	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	-	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	-	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	-	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	-	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	-	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	-	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	-	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	-	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	-	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	-	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Cl-7.12.2(PVC is present in sports shoe)	-	-	-
Cl- 8.1(Marking)	-	-	-

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 7.1.4 Washability

6152

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 2 (2016)

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)

121408 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Tripping limits and characteristics)	-	20000	-
8.3.3.3(Test of dielectric properties)	-	11068	-
8.3.3.4(Mechanical operation and operational performance capability)	-	15000	-
8.3.3.5(Overload performance)	-	11068	-
8.3.3.6(Verification of dielectric withstand)	-	11068	-
8.3.3.7(Verification of temperature-rise)	-	20000	-
8.3.3.8(Verification of Overload releases)	-	11068	-
8.3.3.9(Verification of undervoltage and shunt releases)	-	11068	-
8.3.3.10(Verification of main contact position)	-	11068	-

05 Mar, 2028

-
Restricted only for Sequence I.

6153

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

-----

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	100	-
5(General conditions for the tests)	-	100	-
6(Classification)	-	100	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	500	-
9(Starting of motor-operated appliances)	-	100	-
10(Power input and current)	-	2000	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1500	-
18(Endurance)	-	100	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	300	-
21(Mechanical strength)	-	300	-
22(Construction)	-	200	-
23(Internal wiring)	-	200	-
24(Components)	-	200	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	500	-
29(Clearances, creepage distances and solid insulation)	-	500	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	1000	-
A.101(Pressure test)	-	500	-
12(Charging of metal-ion batteries)	-	100	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-

03 Oct, 2027

-
Included .w.e.f.04.12.2024 Exclusion 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 32 (RADIATION TOXICITY AND SIMILAR HAZARDS)

6154

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

Mobile Phone Handsets-Indian Language Support

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	5000	10% discount to BIS
5.2(Message Readability)	-	5000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
"Cl.6.1 "(Marking)	-	5000	10% discount to BIS
"Cl.6.2 "(BIS Certification Marking)	-	5000	10% discount to BIS
4(Requirements)	-	5000	10% discount to BIS
5(Tests)	-	5000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
4(Requirements)	-	0	-
5(Tests)	-	0	-
6(Marking)	-	0	-

11 Sep, 2027

-
Included w.e.f.13.12.2024

6155

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

Footwear

62625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	0	-
5(DESIGN)	-	200	-
6(SIZE AND FITTINGS)	-	200	-
7.1.1(Whole Footwear)	-	0	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1650	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1650	-
7.1.5(Energy Absorption at Seat Region)	-	1050	-
7.1.6(Complete Shoe Flexing)	-	1500	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	300	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	900	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	550	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	1500	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	0	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	900	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1500	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	900	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	1050	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	2025	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	1000	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	900	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	1250	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1500	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	1500	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	0	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	3500	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	1500	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	1500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	900	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	2025	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	550	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	500	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	1500	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	0	-
7.4 , Table No. 5 , i)(Thickness)	-	300	-
7.4 , Table No. 5 , ii)(Flexing index)	-	1200	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	1050	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , i)(Thickness)	-	300	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	2025	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	1050	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	2500	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	1650	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1650	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	3500	-
7.6 , Table No. 7 , iv)(Tear strength)	-	900	-
7.6 , Table No. 7 , v)(Tensile strength)	-	900	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	1500	-
7.7 , Table No. 8 , i)(Compression set)	-	1500	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	900	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	2500	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	900	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	1000	-
7.8 , Table No. 9 , ii)(Resilience)	-	1000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	1000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	0	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	1000	-
7.8 , Table No. 9 , v)(Peel strength)	-	1350	-
7.9 , Table No. 10 , i)(Peel strength)	-	1700	-
7.9 , Table No. 10 , ii)(Shear strength)	-	1700	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	1250	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	1000	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	1000	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	1500	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	1000	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	1250	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	0	-
8(MARKING AND PACKING)	-	200	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1800	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	4500	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1900	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	5500	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	450	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	5500	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
7.12.2 (Amendment 1)(Lead content)	-	1200	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1500	-
4(SAMPLING AND CONDITIONING)	-	-	-
5(DESIGN)	-	-	-
6(SIZE AND FITTINGS)	-	-	-
7.1.1(Whole Footwear)	-	-	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
7.1.5(Energy Absorption at Seat Region)	-	-	-
7.1.6(Complete Shoe Flexing)	-	-	-
7.1.8(Slip Resistance)	-	-	-
7.1.9(Heel Drop)	-	-	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	-	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	-	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	-	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	-	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	-	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	-	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	-	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	-	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	-	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	-	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	-	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	-	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	-	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	-	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	-	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	-	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	-	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	-	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	-	-
7.3 , Table No. 4 , i)(Tear strength,)	-	-	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	-	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	-	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	-	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	-	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	-	-
7.4 , Table No. 5 , i)(Thickness)	-	-	-
7.4 , Table No. 5 , ii)(Flexing index)	-	-	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	-	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	-	-
7.5 , Table No. 6 , i)(Thickness)	-	-	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	-	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	-	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	-	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	-	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	-	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	-	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	-	-
7.6 , Table No. 7 , iv)(Tear strength)	-	-	-
7.6 , Table No. 7 , v)(Tensile strength)	-	-	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	-	-
7.6 , Table No. 7 , vii)(Compression set)	-	-	-
7.7 , Table No. 8 , i)(Compression set)	-	-	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	-	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	-	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	-	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	-	-
7.8 , Table No. 9 , ii)(Resilience)	-	-	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	-	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	-	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	-	-
7.8 , Table No. 9 , v)(Peel strength)	-	-	-
7.9 , Table No. 10 , i)(Peel strength)	-	-	-
7.9 , Table No. 10 , ii)(Shear strength)	-	-	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	-	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	-	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	-	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	-	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	-	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	-	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	-	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	-	-
8(MARKING AND PACKING)	-	-	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	-	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	-	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	-	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
7.12.2 (Amendment 1)(Lead content)	-	-	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	-	-

31 Dec, 2026

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 7.1.7 Washability

6156

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 6719 (1972)

Solid Pvc Soles And Heels

Footwear

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	400	-
3.6 (vi)(Lead (as Pb) ppm)	-	1200	-
3.6 (v)(Volatility, percent by means )	-	1200	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	900	-
3.6 (iii)(Elongation at break, percent )	-	0	-
3.6 (ii)(Tensile Strength )	-	900	-
3.6 (i)(Relative density )	-	400	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	200	-
6 ,6.1,6.2,6.3(Test Method)	-	0	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	200	-
Cl. 6.4(Measurement of thickness)	-	300	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	1650	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	1650	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	1200	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	1200	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	1200	-
3.6.1(Hardness )	-	-	-
3.6 (vi)(Lead (as Pb) ppm)	-	-	-
3.6 (v)(Volatility, percent by means )	-	-	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	-	-
3.6 (iii)(Elongation at break, percent )	-	-	-
3.6 (ii)(Tensile Strength )	-	-	-
3.6 (i)(Relative density )	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
6 ,6.1,6.2,6.3(Test Method)	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
Cl. 6.4(Measurement of thickness)	-	-	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	-	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	-	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	-	-

31 Dec, 2026

-
Included.w.e.f.27.01.2025

6157

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

Footwear

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	1650	-
4.2(Water absorption)	-	1000	-
4.2(Heat Shrinkage )	-	2500	-
4.2(Split tear strength)	-	900	-
4.2(Shrinkage at room temp)	-	2500	-
4.2(Compression set)	-	1500	-
4.2(Hardness (Shore A))	-	400	-
4.2(Density )	-	400	-
4.2(Size & Thickness )	-	300	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	900	-
6, 6.1(Packing)	-	200	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	1650	-
5, 5.1(Marking)	-	300	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	400	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
6, 6.1(Packing)	-	200	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	300	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	1650	-
4.2(Flexing resistance )	-	1650	-
4.2(Water absorption)	-	1000	-
4.2(Heat Shrinkage )	-	2500	-
4.2(Split tear strength)	-	900	-
4.2(Shrinkage at room temp)	-	2500	-
4.2(Compression set)	-	1500	-
4.2(Hardness (Shore A))	-	400	-
4.2(Density )	-	400	-
4.2(Size & Thickness )	-	300	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	400	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	900	-
6, 6.1(Packing)	-	200	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	1650	-
5, 5.1(Marking)	-	300	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	400	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	400	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	2700	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	2500	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	1650	-
5, 5.1(Marking)	-	300	-
6, 6.1(Packing)	-	200	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	300	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	1650	-
4.2(Flexing resistance )	-	-	-
4.2(Water absorption)	-	-	-
4.2(Heat Shrinkage )	-	-	-
4.2(Split tear strength)	-	-	-
4.2(Shrinkage at room temp)	-	-	-
4.2(Compression set)	-	-	-
4.2(Hardness (Shore A))	-	-	-
4.2(Density )	-	-	-
4.2(Size & Thickness )	-	-	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	-	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	-	-
6, 6.1(Packing)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	-	-
5, 5.1(Marking)	-	-	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	-	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	-	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	-	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	-	-
5, 5.1(Marking)	-	-	-
6, 6.1(Packing)	-	-	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	-	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	-	-

31 Dec, 2026

-
Included w.e.f 06.02.2025

6158

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

Footwear

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	-
5/5.1(REQUIREMENTS-General)	-	200	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
6(Marking and packing)	-	300	-
8.1(Test methods)	-	0	-
8.3(Measurement of thickness)	-	300	-
5.5 (Amendment 1)(Thickness)	-	300	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	400	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	400	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	1650	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	900	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	900	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1650	-
Cl.6.1,6.2,6.3(Marking and packing)	-	300	-
8.1(Test Methods)	-	0	-
Cl.8.3(Measurement of thickness ")	-	300	-

31 Dec, 2026

-
Included.w.e.f.27.01.2025

6159

Unique Test House

9134536

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

ALL SIZE/DESIGNATION /CONDITION/ETC

7300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Freedom from defects)	-	500	-
6.1 Table-1(Cu)	-	700	-
6.1 Table-1(Pb)	-	700	-
6.1 Table-1(Fe)	-	700	-
6.1 Table-1(Total impurities including iron)	-	100	-
6.1 Table-1(Zn)	-	700	-
7.1.1(Tensile Test)	-	1500	-
Table-2(Thickness)	-	100	-
Table-2(Tensile Strength)	-	1000	-
Table-2(Elongation)	-	500	-
Table-2(Vickers Hardness)	-	500	-
Table-2(Transverse Bend)	-	500	-
Table-2(Longitudinal Bend)	-	200	-
7.1.1(Erichsen cupping values -IS 410)	-	100	-
7.1.5(Grain Size - IS 410)	-	100	-
8(Dimensions -IS 410)	-	200	-
11(Marking)	-	100	-
7.1.1(Erichsen cupping values -IS 410)	-	500	-
7.1.5(Grain Size - IS 410)	-	1500	-
8(Dimensions -IS 410)	-	100	-
11(Marking)	-	100	-

07 Sep, 2028

-
Included.w.e.f.13.01.2025

6160

Aaditech Test and Calibration Lab LLP

8179926

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 IS 15787:2008(Ratings )	-	500	-
Cl.7 IS 15787:2008(Classification)	-	200	-
Cl.8 IS 15787:2008(Marking )	-	700	-
Cl.9 IS 15787:2008(Checking of dimension)	-	1000	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	-
Cl.11 IS 15787:2008(Provision for earthing )	-	1000	-
Cl.12 IS 15787:2008(Terminals)	-	1500	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1000	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	1000	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	2000	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	1000	-
Cl.19 IS 15787:2008(Temperature rise )	-	1500	-
Cl.20 IS 15787:2008(Making & Breaking )	-	2000	-
Cl.21 IS 15787:2008(Normal operation )	-	2000	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	1000	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	1000	-
Cl.24 IS 15787:2008(Mechanical strength)	-	1500	-
Cl.25 IS 15787:2008(Resistance to heat )	-	1500	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	1000	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	1000	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1500	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	1500	-

28 Aug, 2027

-
Included w.e.f 12.12.2024

6161

BIS, Eastern Regional Laboratory (ERL)

None

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

For all type

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5, Table -1 S. No-(i) (Amendment No-1) (Insole)	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1) (Toe spring height)	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1) ("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1) (Energy absorption at seat region)	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1) ("Abrasion resistance a-Cellular sole b-Solid sole")	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1) (Hydrolysis resistance)	-
Cl No . 4.14, Table no. 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes)	-
Cl No . 4.14, Table no. 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl No . 4.14, Table no. 1 of IS 17011(iv) (Chromium (VI))	-
Cl No . 4.14, Table no. 1 of IS 17011(v) (Dimethyl fumarate (DMFU))	-
Cl No . 4.14, Table no. 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl No . 4.14, Table no. 1 of IS 17011(viii) (Organotin compounds)	-
Cl No . 4.14, Table no. 1 of IS 17011(x) (pH)	-
Cl No . 4.14, Table no. 1 of IS 17011(xi) (Phthalates (each individual phthalate))	-
Cl No . 4.14, Table no. 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresi)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl.4.1 (Table B-3 Sl I) (Allergenic Disperse Dyes :Disperse blue 3)	-
Cl.4.1 (Table B-3 Sl II) (Allergenic Disperse Dyes :Disperse blue 7)	-
Cl.4.1 (Table B-3 Sl III) (Allergenic Disperse Dyes :Disperse blue 26)	-
Cl.4.1 (Table B-3 Sl IV) (Allergenic Disperse Dyes :Disperse blue 102)	-
Cl.4.1 (Table B-3 Sl V) (Allergenic Disperse Dyes: Disperse brown 1)	-
Cl.4.1 (Table B-3 Sl VI) (Allergenic Disperse Dyes :Disperse yellow 1)	-
Cl.4.1 (Table B-3 Sl VII) (Allergenic Disperse Dyes :Disperse yellow 9)	-
Cl.4.1 (Table B-3 Sl VIII) (Allergenic Disperse Dyes :Disperse yellow 39)	-
Cl.4.1 (Table B-3 Sl IX) (Allergenic Disperse Dyes :Disperse yellow 49)	-
Cl.4.1 (Table B-3 Sl X) (Allergenic Disperse Dyes :Disperse orange 1)	-
Cl.4.1 (Table B-3 Sl XI) (Allergenic Disperse Dyes :Disperse red 11)	-
Cl.4.1 (Table B-3 Sl XII) (Allergenic Disperse Dyes :Disperse red 17)	-
Cl.4.1 (Table B-3 Sl XIII) (Allergenic Disperse Dyes :Disperse yellow 7)	-
Cl.4.1 (Table B-3 Sl XIV) (Allergenic Disperse Dyes :Disperse yellow 56)	-
Cl.4.1 (Table B-3 Sl XV) (Allergenic Disperse Dyes :Disperse red 151)	-
Cl.4.1 (Table B-3 Sl XVI) (Allergenic Disperse Dyes :Solvent red 23)	-
Cl.4.1 (Table B-4 Sl I) (Carcinogenic Disperse Dyes :Navy blue)	-
Cl.4.1 (Table B-4 Sl II) (Carcinogenic Disperse Dyes: Disperse blue 1)	-
Cl.4.1 (Table B-4 Sl IV) (Carcinogenic Disperse Dyes :Disperse blue 106)	-
Cl.4.1 (Table B-4 Sl V) (Carcinogenic Disperse Dyes: Disperse blue 124)	-
Cl.4.1 (Table B-4 Sl VI) (Carcinogenic Disperse Dyes :Disperse yellow 3)	-
Cl.4.1 (Table B-4 Sl VII) (Carcinogenic Disperse Dyes: Disperse orange 3)	-
Cl.4.1 (Table B-4 Sl VIII) (Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-
Cl.4.1 (Table B-4 Sl IX) (Carcinogenic Disperse Dyes :Disperse red 1)	-
Cl.4.1 (Table B-4 Sl X) (Carcinogenic Disperse Dyes :Basic red 9)	-
Cl.4.1 (Table B-4 Sl XI) (Carcinogenic Disperse Dyes :Violet 3)	-
Cl.4.1 (Table B-4 Sl XII) (Carcinogenic Disperse Dyes Disperse yellow 23)	-
Cl-5, Table -1 S. No- (v) (Amendment No-1) (Complete shoe flexing)	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1) (Washability)	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1) (Slip resistance, coefficient of friction (COF),)	-
Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-

-
Except , Washability, Colour fastness to Artificial daylight, Bursting strength Mech-Quantity:- 3 Pairs + Raw material for Additional requirements + Type to be declared + Slab for Hydrolysis resistance test (200 X 200 mm of thickness 3.0 +/- 0.2 mm) + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test Chem-Complete, Material declaration required for Innocuousness test.

6162

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	0	Complete testing charges Rs. 20,000 + GST [including Uranium Cl 5.3]; Cl 5.2 - Rs 3,250 + GST; Cl 5.3 - Rs 12,250 + GST; Cl 5.4 - Rs 4,500 + GST (10% Discount to BIS for Complete Testing) Except radioactive residues
5.4/Annex D/i(P,P-DDT)	-	150	-
5.4/Annex D/ii(Lindane)	-	150	-
5.4/Annex D/iv(b-Endosulfan)	-	150	-
5.4/Annex D/xvi(Dieldrin)	-	150	-
5.4/Annex D/xvi(Aldrin)	-	150	-
5.4/Annex D/i(O,P-DDT)	-	150	-
5.4/Annex D/iv(a-Endosulfan)	-	150	-
5.4/Annex D/iii(d-HCH)	-	150	-
5.4/Annex D/i(O,P-DDD)	-	150	-
5.4/Annex D/i(P,P-DDE)	-	150	-
5.4/Annex D/i(O,P-DDE)	-	150	-
5.4/Annex D/iii(a-HCH)	-	150	-
5.4/Annex D/iii(β- HCH)	-	150	-
5.4/Annex D/iv(Endosulfan sulfate)	-	150	-
5.4/Annex D/i(P,P-DDD)	-	150	-
5.4/Annex D/xii(Alachlor)	-	150	-
5.4/Annex D/vii(Chlorpyrifos)	-	150	-
5.4/Annex D/x(Butachlor)	-	150	-
5.4/Annex D/vi(Ethion)	-	150	-
5.4/Annex D/xiv(Methyl parathion)	-	150	-
5.4/Annex D/xv(Malathion)	-	150	-
5.4/Annex D/viii(Phorate)	-	150	-
5.4/Annex D/v(Monochrotophos)	-	150	-
5.4/Annex D/xiii(Atrazine)	-	150	-
5.4/Annex D/viii(Phorate sulphoxide)	-	150	-
5.4/Annex D/viii(Phorate sulfone)	-	150	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	150	-
5.4/Annex D/xxviii(Malaoxon)	-	150	-
5.4/Annex D/xi(Isoproturon)	-	150	-
5.4/Annex D/ix(2,4 –D)	-	150	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	250	Complete testing charges Rs. 20,000 + GST [including Uranium Cl 5.3]; Cl 5.2 - Rs 3,250 + GST; Cl 5.3 - Rs 12,250 + GST; Cl 5.4 - Rs 4,500 + GST (10% Discount to BIS for Complete Testing) ; Except radioactive residues
Cl-5.2.2(Coliform)	-	250	-
Cl-5.2.3(Staphylococcus aureus)	-	250	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	250	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	250	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	-
Cl-5.2.7(Yeast and mould)	-	250	-
Cl-5.2.8(Salmonella)	-	250	-
Cl-5.2.9(Vibrio cholera)	-	250	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	200	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	200	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	200	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	200	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	200	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	200	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	200	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	200	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	200	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	200	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	350	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	200	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	300	-
Cl-5.3, Table-3 (x)(Uranium)	-	4000	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	250	-
Cl-5.2.8(shigella)	-	250	-
Cl-5.2.9(V.parahaemolyticus)	-	250	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	-
5.4 i)(Dieldrin)	-	150	-
5.4 i)(Aldrin)	-	150	-
5.4 i)(Malathion)	-	150	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	150	-
5.4 i)(Methyl Paraoxon)	-	150	-
5.4 i)(Methyl Parathion)	-	150	-
5.4 i)(Atrazine)	-	150	-
5.4 i)(Alachlor)	-	150	-
5.4 i)(Isoproturon)	-	150	-
5.4 i)(Butachlor)	-	150	-
5.4 i)(2,4-D)	-	150	-
5.4 i)(Phorate sulphone)	-	150	-
5.4 i)(Phorate sulphoxide)	-	150	-
5.4 i)(Monocrotophos)	-	150	-
5.4 i)(Endosulfan Sulphate)	-	150	-
5.4 i)(beta-Endosulfan)	-	150	-
5.4 i)(alpha-Endosulfan)	-	150	-
5.4 i)(Delta-HCH)	-	150	-
5.4 i)(beta-HCH)	-	150	-
5.4 i)(Gamma-HCH (Lindane))	-	150	-
5.4 i)(p,p DDD)	-	150	-
5.4 i)(o,p DDD)	-	150	-
5.4 i)(p,p DDE)	-	150	-
5.4, i)(o,p DDE)	-	150	-
5.4 i)(p,p DDT)	-	150	-
5.4 i)(o,p DDT)	-	150	-
Table 3, x)(Uranium)	-	4000	-
5.4 i)(Phorate)	-	150	-
5.4 i)(Chlorpyrifos)	-	150	-
5.4 i)(Ethion)	-	150	-
5.4 i)(alpha-HCH)	-	150	-
5.3(Appearance)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	150	-
5.4/Annex D/ii(Lindane)	-	150	-
5.4/Annex D/iv(b-Endosulfan)	-	150	-
5.4/Annex D/xvi(Dieldrin)	-	150	-
5.4/Annex D/xvi(Aldrin)	-	150	-
5.4/Annex D/i(O,P-DDT)	-	150	-
5.4/Annex D/iv(a-Endosulfan)	-	150	-
5.4/Annex D/iii(d-HCH)	-	150	-
5.4/Annex D/i(O,P-DDD)	-	150	-
5.4/Annex D/i(P,P-DDE)	-	150	-
5.4/Annex D/i(O,P-DDE)	-	150	-
5.4/Annex D/iii(a-HCH)	-	150	-
5.4/Annex D/iii(β- HCH)	-	150	-
5.4/Annex D/iv(Endosulfan sulfate)	-	150	-
5.4/Annex D/i(P,P-DDD)	-	150	-
5.4/Annex D/xii(Alachlor)	-	150	-
5.4/Annex D/vii(Chlorpyrifos)	-	150	-
5.4/Annex D/x(Butachlor)	-	150	-
5.4/Annex D/vi(Ethion)	-	150	-
5.4/Annex D/xiv(Methyl parathion)	-	150	-
5.4/Annex D/xv(Malathion)	-	150	-
5.4/Annex D/viii(Phorate)	-	150	-
5.4/Annex D/v(Monochrotophos)	-	150	-
5.4/Annex D/xiii(Atrazine)	-	150	-
5.4/Annex D/viii(Phorate sulphoxide)	-	150	-
5.4/Annex D/viii(Phorate sulfone)	-	150	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	150	-
5.4/Annex D/xxviii(Malaoxon)	-	150	-
5.4/Annex D/xi(Isoproturon)	-	150	-
5.4/Annex D/ix(2,4 –D)	-	150	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	250	-
Cl-5.2.2(Coliform)	-	250	-
Cl-5.2.3(Staphylococcus aureus)	-	250	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	250	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	250	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	-
Cl-5.2.7(Yeast and mould)	-	250	-
Cl-5.2.8(Salmonella)	-	250	-
Cl-5.2.9(Vibrio cholera)	-	250	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	200	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	200	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	200	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	200	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	200	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	200	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	200	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	200	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	200	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	200	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	350	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	200	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	300	-
Cl-5.3, Table-3 (x)(Uranium)	-	4000	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	250	-
Cl-5.2.8(shigella)	-	250	-
Cl-5.2.9(V.parahaemolyticus)	-	250	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	-
5.4 i)(Dieldrin)	-	150	-
5.4 i)(Aldrin)	-	150	-
5.4 i)(Malathion)	-	150	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	150	-
5.4 i)(Methyl Paraoxon)	-	150	-
5.4 i)(Methyl Parathion)	-	150	-
5.4 i)(Atrazine)	-	150	-
5.4 i)(Alachlor)	-	150	-
5.4 i)(Isoproturon)	-	150	-
5.4 i)(Butachlor)	-	150	-
5.4 i)(2,4-D)	-	150	-
5.4 i)(Phorate sulphone)	-	150	-
5.4 i)(Phorate sulphoxide)	-	150	-
5.4 i)(Monocrotophos)	-	150	-
5.4 i)(Endosulfan Sulphate)	-	150	-
5.4 i)(beta-Endosulfan)	-	150	-
5.4 i)(alpha-Endosulfan)	-	150	-
5.4 i)(Delta-HCH)	-	150	-
5.4 i)(beta-HCH)	-	150	-
5.4 i)(Gamma-HCH (Lindane))	-	150	-
5.4 i)(p,p DDD)	-	150	-
5.4 i)(o,p DDD)	-	150	-
5.4 i)(p,p DDE)	-	150	-
5.4, i)(o,p DDE)	-	150	-
5.4 i)(p,p DDT)	-	150	-
5.4 i)(o,p DDT)	-	150	-
Table 3, x)(Uranium)	-	4000	-
5.4 i)(Phorate)	-	150	-
5.4 i)(Chlorpyrifos)	-	150	-
5.4 i)(Ethion)	-	150	-
5.4 i)(alpha-HCH)	-	150	-

08 Apr, 2028

-
Included w.e.f. 20.11.2024 Exclusion: Cl. 5.3 Table-4 ii (Beta emitters), Cl. 5.3 Table-4 I (Alpha emitters)

6163

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

----

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	500	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	-
Clause No - 8.2(Addition)	-	500	-
Clause No - 10.1, Table No. -1(power input deviation)	-	4000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	1500	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	500	-
Clause No -24.1.3(for switches)	-	1000	-
Clause No -24.1.4(for automatic control)	-	1000	-
Clause No -24.1.5(for innterconnection couplers)	-	1000	-
Clause No -24.4(plug and socket)	-	1000	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	1000	-
Clause No -27.6(for circuit board)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1000	-
Clause No -30.101("incorporate combustible material")	-	1000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 5.18(linear and angular dimension)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	0	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	0	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	0	-
Clause No - 8.2(Addition)	-	0	-
Clause No - 10.1, Table No. -1(power input deviation)	-	0	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	0	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	0	-
Clause No - 14(Impulse test voltage)	-	0	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	0	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	0	-
Clause No -21.1(Mechanical strength)	-	0	-
Clause No -22.1(construction)	-	0	-
Clause No -22.11(push force applied)	-	0	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	0	-
Clause No -25.5(dimension for pins)	-	0	-
Clause No -27.6(for circuit board)	-	0	-
Clause No -29.2(comparative tracking index)	-	0	-
Clause No -29.3.3(dry heat test)	-	0	-
Clause No -30.2.1(glow wire test)	-	0	-
Clause No -30.101("incorporate combustible material")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-

03 Oct, 2027

-
Included.w.e.f.26.11.2024 Exclusion - 19.11.4.1 to 19.11.4.4 (EMI/EMC)

6164

Classic Testing & Research Centre (B17), Noida

8180826

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1500	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	500	-
12(Mechanical strength)	-	500	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	500	-
16(External flexible cords)	-	500	-
17(Electrical connections and mechanical fixings)	-	500	-
19(Stability and mechanical hazards)	-	500	-
20(Resistance to fire)	-	500	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	500	-
8.16(Wound Component)	-	1000	-
15(Internal wires and power cords)	-	500	-
16.3b(Cord Bending Test)	-	500	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	1000	-
4(General test conditions)	-	1000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	500	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	500	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	500	-
Cl.5.1 of Cl.5(General requirements)	-	500	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	500	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	500	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	500	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	1000	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	500	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	500	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	500	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	500	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	500	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	500	-
Cl.5.3 of Cl.5(Terminals)	-	500	-
Cl.5.3a) of Cl.5(Earth terminal)	-	500	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	500	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	500	-
Cl.5.4 of Cl.5(Caution marking)	-	500	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	500	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	500	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5 of Cl.5(Instructions)	-	500	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	500	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	500	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	500	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	500	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	500	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	500	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	500	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	500	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	500	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	500	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	500	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	500	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	500	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	500	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	500	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	500	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	500	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	500	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	500	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	500	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	500	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	500	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	500	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	500	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	500	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	500	-
Cl.8.6 of Cl.8(Class II apparatus)	-	500	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	500	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	500	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	500	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	500	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	500	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	500	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	500	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	500	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	500	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	500	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	500	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	500	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	500	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	500	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	500	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	500	-
Cl.8.11 of Cl.8(Detaching of wires)	-	500	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	500	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	500	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	500	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	500	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	500	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	500	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	500	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	500	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	500	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	500	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	500	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	500	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	500	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	500	-
Cl.9.1 of Cl.9(Testing on the outside)	-	500	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	500	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	500	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	500	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	500	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	500	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	500	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	500	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	500	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	500	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	500	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	500	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	500	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	500	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	500	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	500	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	500	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	500	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	500	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	500	-
Cl.10.2 of Cl.10(Surge Test)	-	500	-
Cl.10.2 a) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	500	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	500	-
Cl.10.3 of Cl.10(Humidity treatment)	-	500	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	500	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	500	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	500	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	500	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	500	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	500	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	500	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	500	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	500	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	500	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	500	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	500	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	500	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	500	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	500	-
Cl.11.2.6 of Cl.11.2(Windings )	-	500	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	500	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	500	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	500	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	500	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	500	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	500	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	500	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	500	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	500	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	500	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	500	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	500	-
Cl.12.4 of Cl.12(Drawers )	-	500	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	500	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	500	-
Cl.12.5 b) of Cl.12(Impact test,)	-	500	-
Cl.12.5 c) of Cl.12(Torque test)	-	500	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	500	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	500	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	500	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	500	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	500	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	500	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	500	-
Cl.12.7.3 of Cl.12.7(Tests)	-	500	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	500	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	500	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	500	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	500	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	500	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	500	-
Cl.13.1 of Cl.13(General)	-	500	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	500	-
Cl.13.3 of Cl.13(Clearances)	-	500	-
Cl.13.3.1 of Cl.13.3(General)	-	500	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	500	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	500	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	500	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	500	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	500	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	500	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	500	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	500	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	500	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	500	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	500	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	500	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	500	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	500	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	500	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	500	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	500	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	500	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	500	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	500	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	500	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	500	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	500	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	500	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	500	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	500	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	500	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	500	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	500	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	500	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	500	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	500	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	500	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	500	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	500	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	500	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	500	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	500	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	500	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	500	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	500	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	500	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	500	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	500	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	500	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	500	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	500	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	500	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	500	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	500	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	500	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	500	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	500	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	500	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	500	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	500	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	500	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	500	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	500	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	500	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	500	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	500	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	500	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	500	-
Cl.19.1 of Cl.19(Stability requirements)	-	500	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	500	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	500	-
Cl.19.3 of Cl.19(Vertical force test )	-	500	-
Cl.19.4 of Cl.19(Horizontal force test)	-	500	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	500	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	500	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	500	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	500	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	500	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	500	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	500	-
Cl.20.1 of Cl.20(Requirements)	-	500	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	500	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	500	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	500	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	500	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	500	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	500	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	500	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	500	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	500	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	500	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	500	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	500	-
5(Marking and instructions)	-	500	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1000	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	1000	-
12(Mechanical strength)	-	1000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	1000	-
16(External flexible cords)	-	1000	-
17(Electrical connections and mechanical fixings)	-	1000	-
19(Stability and mechanical hazards)	-	1000	-
20(Resistance to fire)	-	1000	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	1000	-
8.16(Wound Component)	-	500	-
15(Internal wires and power cords)	-	500	-
16.3b(Cord Bending Test)	-	1000	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	500	-
4(General test conditions)	-	500	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	1000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	1000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	1000	-
Cl.5.1 of Cl.5(General requirements)	-	500	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	500	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	500	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	1000	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	500	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	1000	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	1000	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	1000	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	1000	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	1000	-
Cl.5.3 of Cl.5(Terminals)	-	1000	-
Cl.5.3a) of Cl.5(Earth terminal)	-	1000	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	1000	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	1000	-
Cl.5.4 of Cl.5(Caution marking)	-	1000	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	1000	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	1000	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	1000	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	1000	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	1000	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	500	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	1000	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	1000	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	1000	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	1000	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	1000	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	1000	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	1000	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	1000	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	1000	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	1000	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	1000	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	1000	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	1000	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	1000	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	1000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	1000	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	1000	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	1000	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	1000	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	1000	-
Cl.8.6 of Cl.8(Class II apparatus)	-	1000	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	1000	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	1000	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	1000	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	1000	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	1000	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	1000	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	1000	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	1000	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	1000	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	1000	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	1000	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	1000	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	1000	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	1000	-
Cl.8.11 of Cl.8(Detaching of wires)	-	1000	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	1000	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	1000	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	1000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	1000	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	1000	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	1000	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	1000	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	1000	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	1000	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	1000	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	1000	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	1000	-
Cl.9.1 of Cl.9(Testing on the outside)	-	1000	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	1000	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	1000	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	1000	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	1000	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	1000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	1000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	1000	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	1000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	1000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	1000	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	1000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	1000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	1000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	1000	-
Cl.10.2 of Cl.10(Surge Test)	-	1000	-
Cl.10.2 a) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	1000	-
Cl.10.3 of Cl.10(Humidity treatment)	-	1000	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	1000	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	1000	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	1000	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	1000	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	1000	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	1000	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	1000	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	1000	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	1000	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	1000	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	1000	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	1000	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	1000	-
Cl.11.2.6 of Cl.11.2(Windings )	-	1000	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	1000	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	1000	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	1000	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	1000	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	1000	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	1000	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	1000	-
Cl.12.4 of Cl.12(Drawers )	-	1000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	1000	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	1000	-
Cl.12.5 b) of Cl.12(Impact test,)	-	1000	-
Cl.12.5 c) of Cl.12(Torque test)	-	1000	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	1000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	1000	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	1000	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	1000	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	1000	-
Cl.12.7.3 of Cl.12.7(Tests)	-	1000	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	1000	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	1000	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	1000	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	1000	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	1000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	1000	-
Cl.13.1 of Cl.13(General)	-	1000	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	1000	-
Cl.13.3 of Cl.13(Clearances)	-	1000	-
Cl.13.3.1 of Cl.13.3(General)	-	1000	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	1000	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	1000	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	1000	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	1000	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	1000	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	1000	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	1000	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	1000	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	1000	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	1000	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	1000	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	1000	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	1000	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	1000	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	1000	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	1000	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	1000	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	1000	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	1000	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	1000	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	1000	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	1000	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	1000	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	1000	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	1000	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	1000	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	1000	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	1000	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	1000	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	1000	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	1000	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	1000	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	1000	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	1000	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	1000	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	1000	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	1000	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	1000	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	1000	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	1000	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	1000	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	1000	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	1000	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	1000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	1000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	1000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	1000	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	1000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	1000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	1000	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	1000	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	1000	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	1000	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	1000	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	1000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	1000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	1000	-
Cl.19.1 of Cl.19(Stability requirements)	-	1000	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	1000	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	1000	-
Cl.19.3 of Cl.19(Vertical force test )	-	1000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	1000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	1000	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	1000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	1000	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	1000	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	1000	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	1000	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	1000	-
Cl.20.1 of Cl.20(Requirements)	-	1000	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	1000	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	1000	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	1000	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	1000	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	1000	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	1000	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	1000	-
5(Marking and instructions)	-	1000	-
7(Heating under normal operating conditions)	-	1000	-
8(Constructional requirements with regard to the protection against electric shock)	-	1000	-
9(Electric shock hazard under normal operating conditions)	-	1000	-
10(Insulation requirements)	-	1000	-
11(Fault conditions)	-	1000	-
12(Mechanical strength)	-	1000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	1000	-
15(TERMINALS)	-	1000	-
16(External flexible cords)	-	1000	-
17(Electrical connections and mechanical fixings)	-	1000	-
19(Stability and mechanical hazards)	-	1000	-
20(Resistance to fire)	-	1000	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	1000	-
8.16(Wound Component)	-	1000	-
15(Internal wires and power cords)	-	1000	-
16.3b(Cord Bending Test)	-	1000	-
20.2.4(Printed Boards)	-	1000	-
3(General requirements)	-	1000	-
4(General test conditions)	-	1000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	1000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	1000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	1000	-
Cl.5.1 of Cl.5(General requirements)	-	1000	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	1000	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	1000	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	1000	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	1000	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	1000	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	1000	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	1000	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	1000	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	1000	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	1000	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	1000	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	1000	-
Cl.5.3 of Cl.5(Terminals)	-	1000	-
Cl.5.3a) of Cl.5(Earth terminal)	-	1000	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	1000	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	1000	-
Cl.5.4 of Cl.5(Caution marking)	-	1000	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	1000	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	1000	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5 of Cl.5(Instructions)	-	1000	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	1000	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	1000	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	1000	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	1000	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	1000	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	1000	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	1000	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	1000	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	1000	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	1000	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	1000	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	1000	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	1000	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	1000	-
Cl.7.1 of Cl.7(General)	-	1000	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	1000	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	1000	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	1000	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	1000	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	1000	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	1000	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	1000	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	1000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	1000	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	1000	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	1000	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	1000	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	1000	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	1000	-
Cl.8.6 of Cl.8(Class II apparatus)	-	1000	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	1000	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	1000	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	1000	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	1000	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	1000	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	1000	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	1000	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	1000	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	1000	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	1000	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	1000	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	1000	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	1000	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	1000	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	1000	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	1000	-
Cl.8.11 of Cl.8(Detaching of wires)	-	1000	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	1000	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	1000	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	1000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	1000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	1000	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	1000	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	1000	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	1000	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	1000	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	1000	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	1000	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	1000	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	1000	-
Cl.9.1 of Cl.9(Testing on the outside)	-	1000	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	1000	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	1000	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	1000	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	1000	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	1000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	1000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	1000	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	1000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	1000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	1000	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	1000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	1000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	1000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	1000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	1000	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	1000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	1000	-
Cl.10.2 of Cl.10(Surge Test)	-	1000	-
Cl.10.2 a) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	1000	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	1000	-
Cl.10.3 of Cl.10(Humidity treatment)	-	1000	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	1000	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	1000	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	1000	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	1000	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	1000	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	1000	-
Cl.11.2 of Cl.11(Heating)	-	1000	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	1000	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	1000	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	1000	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	1000	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	1000	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	1000	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	1000	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	1000	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	1000	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	1000	-
Cl.11.2.6 of Cl.11.2(Windings )	-	1000	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	1000	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	1000	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	1000	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	1000	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	1000	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	1000	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	1000	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	1000	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	1000	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	1000	-
Cl.12.4 of Cl.12(Drawers )	-	1000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	1000	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	1000	-
Cl.12.5 b) of Cl.12(Impact test,)	-	1000	-
Cl.12.5 c) of Cl.12(Torque test)	-	1000	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	1000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	1000	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	1000	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	1000	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	1000	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	1000	-
Cl.12.7.3 of Cl.12.7(Tests)	-	1000	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	1000	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	1000	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	1000	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	1000	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	1000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	1000	-
Cl.13.1 of Cl.13(General)	-	1000	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	1000	-
Cl.13.3 of Cl.13(Clearances)	-	1000	-
Cl.13.3.1 of Cl.13.3(General)	-	1000	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	1000	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	1000	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	1000	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	1000	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	1000	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	1000	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	1000	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	1000	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	1000	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	1000	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	1000	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	1000	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	1000	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	1000	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	1000	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	1000	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	1000	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	1000	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	1000	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	1000	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	1000	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	1000	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	1000	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	1000	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	1000	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	1000	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	1000	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	1000	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	1000	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	1000	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	1000	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	1000	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	1000	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	1000	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	1000	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	1000	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	1000	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	1000	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	1000	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	1000	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	1000	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	1000	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	1000	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	1000	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	1000	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	1000	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	1000	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	1000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	1000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	1000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	1000	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	1000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	1000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	1000	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	1000	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	1000	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	1000	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	1000	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	1000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	1000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	1000	-
Cl.19.1 of Cl.19(Stability requirements)	-	1000	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	1000	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	1000	-
Cl.19.3 of Cl.19(Vertical force test )	-	1000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	1000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	1000	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	1000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	1000	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	1000	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	1000	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	1000	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	1000	-
Cl.20.1 of Cl.20(Requirements)	-	1000	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	1000	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	1000	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	1000	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	1000	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	1000	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	1000	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	1000	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	1000	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	1000	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	1000	-

15 Oct, 2027

-
Included .w.e.f.29.11.2024 Exclusion CL 6 (Hazardous radiations) CL 14 (Components) CL 18 (Mechanical strength of picture tubes and protection against the effects of implosion) CL 6.1 (Ionizing radiation) CL 6.2 (Laser Radiation) CL 6.3

6165

BIS, Northern Regional Laboratory (NRL)

None

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 (Escherichia coli)	-
6.1.2 (Coliform)	-
6.1.3 (Faecal Streptococci)	-
Cl-6.1.3 (Staphylococcus aureus)	-
6.1.4 (Sulphite Reducing Anaerobe)	-
6.1.5 (Pseudomonas aeruginosa)	-
6.1.6 (Yeast and moould)	-
6.1.7 (Salmonella)	-
Cl-6.1.7 (Shigella)	-
6.1.8 (Vibrio Cholera)	-
Cl-6.1.8 (V. parahaemolyticus)	-
6.2/Table 1/i (Colour)	-
6.2/Table 1/ii (Odour)	-
6.2/Table 1/iii (Taste)	-
6.2/Table 1/iv (Turbidity)	-
6.2/Table 1/v (Total Dissoved)	-
6.2/Table 1/vi (pH Value)	-
6.2/Table 2/i (Nitrate)	-
6.2/Table 2/ii (Nitrite)	-
6.2/Table 2/iii (Sulphide)	-
6.2/Table 2/iv (Manganese)	-
6.2/Table 2/v (Copper)	-
6.2/Table 2/vi (Fluoride)	-
6.2/Table 2/vii (Barium)	-
6.2/Table 2/viii (Antimony)	-
6.2/Table 2/ix (Borate)	-
6.2/Table 2/x (Silver)	-
6.2/Table 2/xi (Chloride)	-
6.2/Table 2/xii (Sulphate)	-
6.2/Table 2/xiii (Magnesium)	-
6.2/Table 2/xiv (Calcium)	-
6.2/Table 2/xv (Sodium)	-
6.2/Table 2/xvi (Alkalinity)	-
6.2/Table 2/xvii (Selenium)	-
6.2/Table 2/xviii (Mineral Oil)	-
6.2/Table 2/xix (Phenolic Compounds)	-
6.2/Table 2/xx (Anionic Surface active agents)	-
6.2/Table 3/i (Arsenic)	-
6.2/Table 3/ii (Cadmium)	-
6.2/Table 3/iii (Cyanide)	-
6.2/Table 3/iv (Chromium)	-
6.2/Table 3/v (Mercury)	-
6.2/Table 3/vi (Lead)	-
6.2/Table 3/vii (Nickel)	-
6.2/Table 3/viii (Polychlorinated biphenyle (PCB))	-
6.2/Table 3/ix (Polynuclear aromatic hydrocarbons)	-
6.2/Table 3/x (Uranium)	-

-
MICROBIOLOGICAL COMPLETE, Chemical Cyanide and RARs not available

6166

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

Type 1 , Type 2 , Type 3

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1(Construction)	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	0	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10.4(Linear Deflection Test [ Cl.10.4 ])	-	0	-
10.5(External load Test [ Cl.10.5 ])	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
13(External Influences )	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	0	-
8(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1.101(Construction)	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Impact Test [ Cl.10.3 ])	-	0	-
10(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10(Linear Deflection Test [ Cl.10.4 ])	-	0	-
10(External load Test [ Cl.10.5 ])	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
13(External Influences )	-	0	-
4(General Requirements)	-	0	-
5(General Conditions for test)	-	0	-
7(Marking)	-	500	-
8(Dimensions)	-	1000	-
9(Construction)	-	2000	-
10(Mechanical Properties)	-	4000	-
11(Resistance to flame propagation)	-	2000	-
12(Electrical characteristics)	-	2000	-
13(External Influences)	-	3500	-
9(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	0	-

11 Apr, 2028

-
Included. w.e.f.09.12.2024

6167

FICCI Research & Analysis Centre

8131215

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

13491 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4/Annex D/i(P,P-DDT)	-	3088	Including all pesticides
5.4/Annex D/ii(Lindane)	-	3088	Including all pesticides
5.4/Annex D/iv(b-Endosulfan)	-	3088	Including all pesticides
5.3(Appearance)	-	71	NA
5.4/Annex D/xvi(Aldrin)	-	3088	Including all pesticides
5.4/Annex D/xvi(Dieldrin)	-	3088	Including all pesticides
5.4/Annex D/i(O,P-DDT)	-	3088	Including all pesticides
5.4/Annex D/iv(a-Endosulfan)	-	3088	Including all pesticides
5.4/Annex D/iii(d-HCH)	-	3088	Including all pesticides
5.4/Annex D/i(O,P-DDD)	-	3088	Including all pesticides
5.4/Annex D/i(P,P-DDE)	-	3088	Including all pesticides
5.4/Annex D/i(O,P-DDE)	-	3088	Including all pesticides
5.4/Annex D/iii(a-HCH)	-	3088	Including all pesticides
5.4/Annex D/iii(β- HCH)	-	3088	Including all pesticides
5.4/Annex D/iv(Endosulfan sulfate)	-	3088	Including all pesticides
5.4/Annex D/i(P,P-DDD)	-	3088	Including all pesticides
5.4/Annex D/xii(Alachlor)	-	3088	Including all pesticides
5.4/Annex D/vii(Chlorpyrifos)	-	3088	Including all pesticides
5.4/Annex D/x(Butachlor)	-	3088	Including all pesticides
5.4/Annex D/vi(Ethion)	-	3088	Including all pesticides
5.4/Annex D/xiv(Methyl parathion)	-	3088	Including all pesticides
5.4/Annex D/xv(Malathion)	-	3088	Including all pesticides
5.4/Annex D/viii(Phorate)	-	3088	Including all pesticides
5.4/Annex D/v(Monochrotophos)	-	3088	Including all pesticides
5.4/Annex D/xiii(Atrazine)	-	3088	Including all pesticides
5.4/Annex D/viii(Phorate sulphoxide)	-	3088	Including all pesticides
5.4/Annex D/viii(Phorate sulfone)	-	3088	Including all pesticides
5.4/Annex D/xxvii(Methyl paraoxon)	-	3088	Including all pesticides
5.4/Annex D/xxviii(Malaoxon)	-	3088	Including all pesticides
5.4/Annex D/xi(Isoproturon)	-	3088	Including all pesticides
5.4/Annex D/ix(2,4 –D)	-	3088	Including all pesticides
Cl-5.1(General Requirements)	-	190	Including all pesticides
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	214	Including all pesticides
Cl-5.2.2(Coliform)	-	214	Including all pesticides
Cl-5.2.3(Staphylococcus aureus)	-	214	Including all pesticides
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	214	Including all pesticides
Cl-5.2.5(Pseudomonas Aeruginosa)	-	214	Including all pesticides
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	214	Including all pesticides
Cl-5.2.7(Yeast and mould)	-	214	Including all pesticides
Cl-5.2.8(Salmonella)	-	214	Including all pesticides
Cl-5.3, Table-1 (iii)(Taste)	-	71	NA
Cl-5.2.9(Vibrio cholera)	-	214	NA
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	71	NA
Cl-5.3, Table-1 (ii)(Odour)	-	71	NA
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	238	NA
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	238	NA
Cl-5.3, Table-1 (vi)(pH)	-	71	NA
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	190	NA
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	190	NA
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	190	NA
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	190	NA
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	238	NA
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	238	NA
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	475	NA
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	190	NA
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	190	NA
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	190	NA
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	190	NA
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	190	NA
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	238	NA
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	238	NA
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	190	NA
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	190	NA
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	190	NA
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	238	NA
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	475	NA
Cl-5.3, Table-2 (xx)(Mineral oil)	-	238	NA
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	238	NA
Cl-5.3, Table-2 (xxii)(Sulphide)	-	238	Na
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	190	Na
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	190	NA
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	238	NA
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	190	NA
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	190	NA
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	190	NA
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	190	NA
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	190	NA
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	190	NA
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	190	NA
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	3088	Including all pesticides
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	3088	Including all pesticides
Cl-5.3, Table-3 (x)(Uranium)	-	190	NA
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0	Testing facility is no available and the same will be subcontracting
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0	Testing facility is no available and the same will be subcontracting
Cl-5.4 (i)(Pesticide residues considered individually)	-	3088	Including all pesticides
Cl-5.4 (ii)(Total pesticide residue)	-	3088	Including all pesticides
Cl-5.2.3(Faecal streptococci)	-	214	NA
Cl-5.2.8(shigella)	-	214	NA
Cl-5.2.9(V.parahaemolyticus)	-	214	NA
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	214	NA
5.4 i)(Dieldrin)	-	3088	Including all pesticides
5.4 i)(Aldrin)	-	3088	Including all pesticides
5.4 i)(Malathion)	-	3088	Including all pesticides
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	3088	Including all pesticides
5.4 i)(Methyl Paraoxon)	-	3088	Including all pesticides
5.4 i)(Methyl Parathion)	-	3088	Including all pesticides
5.4 i)(Atrazine)	-	3088	Including all pesticides
5.4 i)(Alachlor)	-	3088	Including all pesticides
5.4 i)(Isoproturon)	-	3088	Including all pesticides
5.4 i)(Butachlor)	-	3088	Including all pesticides
5.4 i)(2,4-D)	-	3088	Including all pesticides
5.4 i)(Phorate sulphone)	-	3088	Including all pesticides
5.4 i)(Phorate sulphoxide)	-	3088	Including all pesticides
5.4 i)(Phorate)	-	3088	Including all pesticides
5.4 i)(Chlorpyrifos)	-	3088	Including all pesticides
5.4 i)(Ethion)	-	3088	Including all pesticides
5.4 i)(Monocrotophos)	-	3088	Including all pesticides
5.4 i)(Endosulfan Sulphate)	-	3088	Including all pesticides
5.4 i)(beta-Endosulfan)	-	3088	Including all pesticides
5.4 i)(alpha-Endosulfan)	-	3088	Including all pesticides
5.4 i)(Delta-HCH)	-	3088	Including all pesticides
5.4 i)(beta-HCH)	-	3088	Including all pesticides
5.4 i)(alpha-HCH)	-	3088	Including all pesticides
5.4 i)(Gamma-HCH (Lindane))	-	3088	Including all pesticides
5.4 i)(p,p DDD)	-	3088	Including all pesticides
5.4 i)(o,p DDD)	-	3088	Including all pesticides
5.4 i)(p,p DDE)	-	3088	Including all pesticides
5.4, i)(o,p DDE)	-	3088	Including all pesticides
5.4 i)(p,p DDT)	-	3088	Including all pesticides
5.4 i)(o,p DDT)	-	3088	Including all pesticides
Table 3, x)(Uranium)	-	190	NA

08 Jun, 2027

-
Included w.e.f.25.11.2024 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

6168

CIPET, Hyderabad

6111634

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

59960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	500	FOR BIS 25 % DISCOUNT
5.2.1(Fabric)	-	500	FOR BIS 25 % DISCOUNT
5.2.2(Linear density of tapes)	-	500	FOR BIS 25 % DISCOUNT
5.2.4(Unlaminated fabric mass)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500	FOR BIS 25 % DISCOUNT
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	FOR BIS 25 % DISCOUNT
5.4.1(Sack)	-	2000	FOR BIS 25 % DISCOUNT
5.4.1.1(Centre seam)	-	1000	FOR BIS 25 % DISCOUNT
5.4.1.2(Bottom seam)	-	1000	FOR BIS 25 % DISCOUNT
5.4.2(Sack)	-	1000	FOR BIS 25 % DISCOUNT
5.4.3(Sack)	-	500	FOR BIS 25 % DISCOUNT
5.4.5(Liner)	-	3000	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Inside length)	-	500	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Inside width)	-	500	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Gusset width)	-	500	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Warp per dm)	-	500	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Weft per dm)	-	500	FOR BIS 25 % DISCOUNT
6.1.1, Table 1(Mass of laminated fabric)	-	500	FOR BIS 25 % DISCOUNT
6.2, Table 1(Average breaking strength - Lengthwise)	-	1600	FOR BIS 25 % DISCOUNT
6.2, Table 1(Average breaking strength - Widthwise)	-	1600	FOR BIS 25 % DISCOUNT
6.2, Table 1(Breaking strength of bottom seam)	-	1600	FOR BIS 25 % DISCOUNT
6.2, Table 1(Breaking strength of centre seam)	-	1600	FOR BIS 25 % DISCOUNT
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	1600	FOR BIS 25 % DISCOUNT
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	1600	FOR BIS 25 % DISCOUNT
6.3(Average breaking strength - Lengthwise after UV exposure)	-	12800	FOR BIS 25 % DISCOUNT
6.3(Average breaking strength - Widthwise after UV exposure)	-	12800	FOR BIS 25 % DISCOUNT
6.4(Drop Impact Testing of Filled Sacks)	-	1100	FOR BIS 25 % DISCOUNT
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	500	FOR BIS 25 % DISCOUNT
Clause 6.2.2(Stitch strength)	-	1600	FOR BIS 25 % DISCOUNT
Clause 6.2.2(Weld seam strength)	-	1600	FOR BIS 25 % DISCOUNT
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	500	FOR BIS 25 % DISCOUNT
Clause 6.2.2(Stitch strength)	-	1600	FOR BIS 25 % DISCOUNT
Clause 6.2.2(Weld seam strength)	-	1600	FOR BIS 25 % DISCOUNT
Clause 6.5 Table 1 viii(Ash content)	-	1200	FOR BIS 25 % DISCOUNT

23 Feb, 2027

-
Included .w.e.f.29.11.2024

6169

CIPET, Hyderabad

6111634

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE 63, PE 80 and PE 100

54875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1125	FOR BIS 25 % DISCOUNT
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	FOR BIS 25 % DISCOUNT
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	FOR BIS 25 % DISCOUNT
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	FOR BIS 25 % DISCOUNT
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	FOR BIS 25 % DISCOUNT
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	700	FOR BIS 25 % DISCOUNT
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	925	FOR BIS 25 % DISCOUNT
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	900	FOR BIS 25 % DISCOUNT
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	700	FOR BIS 25 % DISCOUNT
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	3000	FOR BIS 25 % DISCOUNT
5.2.1.1, T2(Compound ash content - Any Method)	-	1200	FOR BIS 25 % DISCOUNT
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	925	FOR BIS 25 % DISCOUNT
5.3(Density of Higher olefin - IS 7328:2020)	-	700	FOR BIS 25 % DISCOUNT
5.3(Olefin Constituents- 14333-2022)	-	2125	FOR BIS 25 % DISCOUNT
5.3(Loading of Carbon Black - IS 2530:1963)	-	925	FOR BIS 25 % DISCOUNT
5.3(Ash content- Any Method)	-	1200	FOR BIS 25 % DISCOUNT
5.3(Toluene extract - Any Method)	-	900	FOR BIS 25 % DISCOUNT
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	700	FOR BIS 25 % DISCOUNT
5.3(Carbon black particle size - Any Method)	-	3000	FOR BIS 25 % DISCOUNT
5.4(Antioxidant - Any Method)	-	0	FOR BIS 25 % DISCOUNT
6(Pipe Description - IS 14333-2022)	-	0	FOR BIS 25 % DISCOUNT
6.2(Colour- IS 14333-2022)	-	500	FOR BIS 25 % DISCOUNT
7.1(Visual Appearance- IS 14333-2022)	-	500	FOR BIS 25 % DISCOUNT
7.2(Length- IS 14333-2022)	-	500	FOR BIS 25 % DISCOUNT
7.3(Coiling- IS 14333-2022)	-	0	FOR BIS 25 % DISCOUNT
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	FOR BIS 25 % DISCOUNT
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	500	FOR BIS 25 % DISCOUNT
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	500	FOR BIS 25 % DISCOUNT
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	FOR BIS 25 % DISCOUNT
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	FOR BIS 25 % DISCOUNT
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	FOR BIS 25 % DISCOUNT
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	FOR BIS 25 % DISCOUNT
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	FOR BIS 25 % DISCOUNT
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	700	FOR BIS 25 % DISCOUNT
8.3(Carbon black content- IS 2530-1963)	-	925	FOR BIS 25 % DISCOUNT
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	FOR BIS 25 % DISCOUNT
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	FOR BIS 25 % DISCOUNT
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	FOR BIS 25 % DISCOUNT
8.6(Density-IS 7328:2020)	-	700	FOR BIS 25 % DISCOUNT
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1800	FOR BIS 25 % DISCOUNT
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1800	FOR BIS 25 % DISCOUNT
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1800	FOR BIS 25 % DISCOUNT
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	5500	FOR BIS 25 % DISCOUNT

23 Feb, 2027

-
Included.w.e.f.29.11.2024

6170

BIS, Northern Regional Laboratory (NRL)

None

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (iv) (Cyanide (as CN))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/ix (2,4 –D)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/xvi (Dieldrin)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-

-
Microbiological parameter is complete. Cyanide and RARs not available

6171

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17509 (2021)

Disposable Baby Diaper Specification

16100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.7.1(pH Value)	-	250	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	3050	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	600	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	2850	-
Clause no.6(Diaper Length)	-	125	-
Clause no.6(Diaper Width)	-	125	-
Clause no.6(Diaper Crotch)	-	125	-
Clause no.6(Absorbent Core Length)	-	125	-
Clause no.6(Absorbent Core Width Back)	-	125	-
Clause no.6(Absorbent Core Width Front)	-	125	-
Clause no.6(Core Cortch)	-	125	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Covered under rewet under load
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	1375	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Covered under rewet under load
Clause no.7.5(Phthalate Test)	-	3500	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	2600	-
Clause no. 3(Material)	-	1000	Covers testing charges for clause 3.0,4.0,5.0,9.0,10.0
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Covered under material
Clause no. 3.2(Absorbent Core)	-	0	Covered under material
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Covered under material
Clause no. 4(Fastening & Securing Mechanism)	-	0	Covered under material
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Covered under material
Clause no.6(Type and Size: FOR X LARGE)	-	0	Covered under material
9 & 9.1(Marking)	-	0	Covered under material
10(Packing)	-	0	Covered under material

-
-

6172

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

Disposable Sanitary Napkin/All sizes

11925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	250	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	675	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	3050	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	600	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	2600	Except skin irritation & sensitization
Cl 5(SIZES, Regular )	-	250	-
3.1(Cover/Top sheet)	-	1000	The testing charges covers Clause 3,4,6,9 and 10
3.2(Absorbent Core)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
3.3(Barrier or Bottom Sheet)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
4.1 (1)(Type and shapes of sanitary napkins)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
4.2(Sanitary napkins shape & design)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
6.0(Manufacture, workmanship & finish)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
7.6(Pthalate test)	-	3500	-
Cl 5(SIZES, Large)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(SIZES, Extra Large)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(SIZES, XXL)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(Absorbent Capacity, Regular )	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, Large)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, Extra Large)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, XXL)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption

-
-

6173

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(POWER INPUT AND CURRENT)	-	1500	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(IMPULSE VOLTAGE TEST)	-	1000	-
15(HUMIDITY TREATMENT TEST)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	2000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1500	-
22(CONSTRUCTION)	-	1500	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	-
27(PROVISION FOR EARTHING)	-	2500	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.32(Oxygen bomb for rubber material)	-	2000	-
22.46(Software)	-	1000	-
Cl-19.11.4.1(Electrostatic discharge)	-	1000	-
Cl-19.11.4.3(Fast transient bursts)	-	1000	-
Cl-19.11.4.4(Surge Immunity test)	-	1000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	1000	-
Cl-19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 exclusion Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.5 (Immunity to conducted discharge)

6174

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	500	-
4(INSULATION : MATERIALS)	-	500	-
5.1(FILLER AND INNER SHEATH)	-	500	-
5.2(FILLER AND INNER SHEATH)	-	500	-
6(ARMOURING)	-	500	-
7(OUTER SHEATH)	-	500	-
8.1(CONDUCTOR: CONSTRUCTION)	-	500	-
8.2(PROTECTIVE BARRIER)	-	500	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	500	-
9.1(Insulation Applied by extrusicn)	-	500	-
9.2(Thickness of Insulation - Average)	-	1000	-
9.3(Thickness of Insulation - Minimum)	-	1000	-
9.4(Application of Insulation)	-	500	-
10.1(Core Identification)	-	500	-
10.2(Core Identification- Neutral)	-	500	-
10.3(Core Identification by number )	-	500	-
10.4(Core Identification by number - Neutral )	-	500	-
11(LAVING UP OF CORES)	-	500	-
12.1 & 12.2(Inner sheath : Application)	-	500	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	500	-
13.1.2(Armouring: Coverage )	-	1500	-
13.1.3(Armouring: Direction of Lay )	-	500	-
13.2(Type of armour )	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(Armour: Joint)	-	500	-
13.5(Armouring : Resistance Test)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	500	-
14.2(Colour of outer sheath)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	1000	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	2000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	5000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	2000	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	-
16.2(HIGH VOLTAGE TEST )	-	2000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1000	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	1000	-
16.9(Oxygen Index Test)	-	3000	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	3000	-
16.14(Temperature Index)	-	2000	-
17.1(Manufacturer'. identification)	-	500	-
17.2(cable Indentification )	-	500	-
17.3(cable Code )	-	500	-
15.4 (a)(Cold bend)	-	1000	-
15.4 (b)(Cold impact)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 4(Copper purity test)	-	2500	-
Cl No. 16.15(Smoke density test)	-	2000	-
Table 2(Cold Impact test for Outer sheath)	-	1000	-
Table 2(Cold bend test for Outer sheath)	-	1000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl.8(Conductor)	-	500	-
Cl.8(Conductor)	-	500	-
Cl.8(Conductor)	-	500	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	1000	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	1000	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	1000	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-

11 Mar, 2028

-
-

6175

Novateur Electrical and Digital Systems Pvt Ltd, Sinnar, Nasik

7176426

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	20000	-
4(Classification)	-	20000	-
5.3.2(Rated voltages)	-	20000	-
5.3.2.1(Rated operational voltage)	-	20000	-
5.3.2.2(Rated insulation voltage)	-	20000	-
5.3.2.3(Rated impulse withstand voltage)	-	20000	-
5.3.3(Currents)	-	20000	-
5.3.3.2(Conventional free air thermal current)	-	20000	-
5.3.3.3(Conventional enclosed thermal current)	-	20000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	20000	-
5.3.3.5(Rated uninterrupted current)	-	50000	-
5.3.4(Rated frequency)	-	20000	-
5.3.5(Rated duty)	-	50000	-
5.3.5.2(Eight-hour duty)	-	50000	-
5.3.5.3(Uninterrupted duty)	-	50000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	20000	-
5.3.6.2(Rated making capacity)	-	100000	-
5.3.6.3(Rated breaking capacity)	-	100000	-
5.3.7(Short-circuit characteristics)	-	100000	-
5.3.7.1(Rated short-time withstand current)	-	100000	-
5.3.7.2(Rated short-circuit making capacity)	-	100000	-
5.3.7.4(Rated conditional short-circuit current)	-	100000	-
5.4(Utilization category)	-	20000	-
5.5(Control circuits)	-	20000	-
5.6(Auxiliary circuits)	-	20000	-
5.7(Relays and releases)	-	20000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	20000	-
6.2.2(Marking)	-	50000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	50000	-
7(Normal service, mounting and transport conditions)	-	20000	-
8.1.1(General)	-	20000	-
8.2.1.2(Limits of operation of power operated equipment)	-	20000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	20000	-
8.2.1.4(Limits of operation of shunt releases)	-	20000	-
8.2.2(Temperature-rise)	-	40000	-
8.2.3(Dielectric properties)	-	50000	-
8.2.3.2(Impulse withstand voltage)	-	50000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	50000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	50000	-
8.2.4.1(Making and breaking capacities)	-	100000	-
8.2.4.2(Operational performance)	-	100000	-
8.2.4.3(Mechanical durability)	-	50000	-
8.2.4.4(Electrical durability)	-	100000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	100000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	50000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	50000	-
9.1.3.2(Mechanical operation test)	-	100000	-
9.1.3.3(Dielectric test)	-	50000	-
9.1.4(Sampling tests)	-	20000	-
9.1.5Special tests(Special tests)	-	20000	-
9.2(Compliance with constructional requirements)	-	20000	-
9.3.4.2(Temperature-rise)	-	40000	-
9.3.4.3(Test of dielectric properties)	-	50000	-
9.3.4.4(Making and breaking capacities)	-	100000	-
9.3.4.5(Dielectric verification)	-	50000	-
9.3.4.6(Leakage current)	-	30000	-
9.3.5.2(Operational performance test)	-	50000	-
9.3.6.2(Short-time withstand current test)	-	100000	-
9.3.6.3(Short-circuit making capacity test)	-	100000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	100000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	150000	-
9.3.8.2(Overload test)	-	100000	-
9.5.2(Mechanical durability)	-	50000	-
9.5.3(Electrical durability)	-	100000	-
D.7.1.1(Ambient air temperature)	-	20000	-
D.8.1.4(Clearances and creepage distances)	-	50000	-
D.9.3.10(Thermal cycling test)	-	0	Already mentioned in Test Facility not available for clause no. D.9.3.10(Thermal cyclic test)
8.1.7.2(Additional constructional requirements)	-	20000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	40000	-
9.3.4.8(Strength of actuator mechanism)	-	50000	-
9.3.5.3(Dielectric verification)	-	50000	-
9.3.5.5(Temperature-rise verification)	-	40000	-
9.3.6.4(Dielectric verification)	-	50000	-
9.3.6.6(Temperature-rise verification)	-	40000	-
9.3.7.4(Dielectric verification)	-	50000	-
9.3.7.6(Temperature-rise verification)	-	40000	-
9.3.8.3(Dielectric verification)	-	50000	-
9.3.8.5(Temperature-rise verification)	-	40000	-
9.3.5.4(Leakage current)	-	30000	-
9.3.6.5(Leakage current)	-	30000	-
9.3.7.5(Leakage current)	-	30000	-
9.3.8.4(Leakage current)	-	30000	-
9.1.3.2(Mechanical operation test)	-	100000	-
E.9.2(Current cycling test)	-	150000	-
E.9.2.4(Temperature measurements)	-	40000	-
8.1.2.2(Glow wire testing)	-	50000	-
3.1(General)	-	20000	-
4(Classification)	-	20000	-
5.3.2(Rated voltages)	-	20000	-
5.3.2.1(Rated operational voltage)	-	20000	-
5.3.2.2(Rated insulation voltage)	-	20000	-
5.3.2.3(Rated impulse withstand voltage)	-	50000	-
5.3.3(Currents)	-	20000	-
5.3.3.2(Conventional free air thermal current)	-	20000	-
5.3.3.3(Conventional enclosed thermal current)	-	20000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	20000	-
5.3.3.5(Rated uninterrupted current)	-	50000	-
5.3.4(Rated frequency)	-	20000	-
5.3.5(Rated duty)	-	50000	-
5.3.5.2(Eight-hour duty)	-	50000	-
5.3.5.3(Uninterrupted duty)	-	50000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	20000	-
5.3.6.2(Rated making capacity)	-	100000	-
5.3.6.3(Rated breaking capacity)	-	100000	-
5.3.7(Short-circuit characteristics)	-	100000	-
5.3.7.1(Rated short-time withstand current)	-	100000	-
5.3.7.2(Rated short-circuit making capacity)	-	100000	-
5.3.7.4(Rated conditional short-circuit current)	-	100000	-
5.4(Utilization category)	-	20000	-
5.5(Control circuits)	-	20000	-
5.6(Auxiliary circuits)	-	20000	-
5.7(Relays and releases)	-	20000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	20000	-
6.2.2(Marking)	-	50000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	50000	-
7(Normal service, mounting and transport conditions)	-	20000	-
8.1.1(General)	-	20000	-
8.2.1.2(Limits of operation of power operated equipment)	-	20000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	20000	-
8.2.1.4(Limits of operation of shunt releases)	-	20000	-
8.2.2(Temperature-rise)	-	40000	-
8.2.3(Dielectric properties)	-	50000	-
8.2.3.2(Impulse withstand voltage)	-	50000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	50000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	100000	-
8.2.4.1(Making and breaking capacities)	-	100000	-
8.2.4.2(Operational performance)	-	100000	-
8.2.4.3(Mechanical durability)	-	50000	-
8.2.4.4(Electrical durability)	-	50000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	100000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	20000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	100000	-
9.1.3.2(Mechanical operation test)	-	100000	-
9.1.3.3(Dielectric test)	-	50000	-
9.1.4(Sampling tests)	-	20000	-
9.1.5Special tests(Special tests)	-	20000	-
9.2(Compliance with constructional requirements)	-	20000	-
9.3.4.2(Temperature-rise)	-	40000	-
9.3.4.3(Test of dielectric properties)	-	50000	-
9.3.4.4(Making and breaking capacities)	-	100000	-
9.3.4.5(Dielectric verification)	-	50000	-
9.3.4.6(Leakage current)	-	30000	-
9.3.5.2(Operational performance test)	-	100000	-
9.3.6.2(Short-time withstand current test)	-	100000	-
9.3.6.3(Short-circuit making capacity test)	-	100000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	100000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	150000	-
9.3.8.2(Overload test)	-	100000	-
9.5.2(Mechanical durability)	-	50000	-
9.5.3(Electrical durability)	-	50000	-
D.7.1.1(Ambient air temperature)	-	20000	-
D.8.1.4(Clearances and creepage distances)	-	50000	-
8.1.7.2(Additional constructional requirements)	-	20000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	40000	-
9.3.4.8(Strength of actuator mechanism)	-	50000	-
9.3.5.3(Dielectric verification)	-	50000	-
9.3.5.5(Temperature-rise verification)	-	40000	-
9.3.6.4(Dielectric verification)	-	50000	-
9.3.6.6(Temperature-rise verification)	-	40000	-
9.3.7.4(Dielectric verification)	-	50000	-
9.3.7.6(Temperature-rise verification)	-	40000	-
9.3.8.3(Dielectric verification)	-	50000	-
9.3.8.5(Temperature-rise verification)	-	40000	-
9.3.5.4(Leakage current)	-	30000	-
9.3.6.5(Leakage current)	-	30000	-
9.3.7.5(Leakage current)	-	30000	-
9.3.8.4(Leakage current)	-	30000	-
9.1.3.2(Mechanical operation test)	-	100000	-
E.9.2(Current cycling test)	-	150000	-
E.9.2.4(Temperature measurements)	-	40000	-
8.1.2.2(Glow wire testing)	-	50000	-

21 Feb, 2027

-
Included. w.e.f.09.12.2024 Exclusion CL 8.1.7.1 (General) CL 8.2.1 (Operating conditions) CL 8.2.1.1 (General) CL 8.2.8 (Critical load current performance: DC equipment) CL 9.3.3.6 (DC test current ripple) CL 9.3.4.4.3 (Characteristics of transient recovery voltage) CL 9.3.9.2 (Determination of critical load current) CL 9.4 (Electromagnetic compatibility tests) CL 9.5.4 (Damp heat, salt mist, vibration and shock) CL D.8.1.12 (Degrees of protection of enclosed equipment) CL D.9.3.11 (Climatic test) CL D.9.3.12 (Temperature-rise verification with solar effects – Outdoor units only) CL CL E.9.3.1 (Flexion test) CL E.9.3.2 (Pull-out test) CL 9.3.9.3 (Critical load current performance) CL D.9.3.10 (Thermal cycling test) CL 9.4.2 (Immunity) CL 9.4.3 (Emission) Capacity: Short Circuit Test: 63A to 50kA @ 415 V Making & Breaking capacities: up to 50kA Short time withstand:50kA Temperature rise test: Upto 4000A Electrical Endurance test: Upto 2500A @ 415V Mechanical Endurance test HV (Upto 15kV AC/DC) Leakage Current (Upto 300mA) Impulse (Upto 20kVp) Voltage source 50 to 1000VAC/DC

6176

BIS, Southern Regional Laboratory (SRL)

None

IS 1328 (1996)

Veneered Decorative Plywood -Specification

Please see remarks View breakup
Rs. 5550/- for MR. Grade & material testing charges as per relevant referred ISs Rs. 6720/- for BWR Grade & material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions & Tolerances - Width - Cl. 8)	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-

-
Quantity Required: 2 Nos of Full Sheets

6177

BIS, Southern Regional Laboratory (SRL)

None

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
12, 12.1 (MARKING)	-

-
Quantity Required: 2 Nos of Full Sheets

6178

BIS, Southern Regional Laboratory (SRL)

None

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Rs.6494.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
cl. 11.1 (marking - BIS certification marking)	-

-
Quantity Required: 2 Nos of Block Boards

6179

CIPET, Hyderabad

6111634

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

Polyethylene/ Class 1 - 3 / Size - 12 -32mm

17725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	6900	25 % DISCOUNT FOR BIS
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	25 % DISCOUNT FOR BIS
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	25 % DISCOUNT FOR BIS
Cl-6.0(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	25 % DISCOUNT FOR BIS
Cl-7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
Cl-7.3(Tensile Test)	-	1300	25 % DISCOUNT FOR BIS
Cl-7.3.1(Test Piece)	-	500	25 % DISCOUNT FOR BIS
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	25 % DISCOUNT FOR BIS
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	25 % DISCOUNT FOR BIS
6(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	1000	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	3000	25 % DISCOUNT FOR BIS
7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
7.3(Tensile Strength)	-	1300	25 % DISCOUNT FOR BIS
7.3(Elongation at Break)	-	1300	25 % DISCOUNT FOR BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
4.2(a)(Carbon Black Content-IS 2530)	-	925	25 % DISCOUNT FOR BIS
4.2(b)(Carbon Black Dispersion-IS 2530)	-	925	25 % DISCOUNT FOR BIS
Cl-4.1(Material)	-	6900	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	-
Cl-7.2(Reversion Test)	-	700	-
Cl-7.3(Tensile Test)	-	1300	-
Cl-7.3.1(Test Piece)	-	500	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.1 & Table 2(Hydraulic Characteristics)	-	1000	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Strength)	-	1300	-
7.3(Elongation at Break)	-	1300	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
4.2(a)(Carbon Black Content-IS 2530)	-	925	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	-

23 Feb, 2027

-
Included w.e.f. 20.11.2024

6180

BIS, Southern Regional Laboratory (SRL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-8.3 (Edge Straightness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.9, Table-3 (ii) a (Wet Bending Strength- Modulus of Rupture (MOR)-Average)	-
Cl-9.9, Table-3 (ii) b (Wet Bending Strength- Modulus of Rupture (MOR), -Minimum individual)	-
Cl-11.1 (Marking)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.10 (Retention of Preservative)	-

-
Quantity Required: 2 Nos of Marine Plywood Sheets Except Steady-state Formaldehyde emission (optional test) as per Cl.9.12

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number