BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6121

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33/43/53/43-S/53-S

39625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio. Our current testing charges
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio. Our current testing charges
6.1 Table-2 iii.(Insoluble residue)	-	2340	Our current testing charges
6.1 Table-2 iv(Magnesia)	-	3040	Our current testing charges
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	2340	Our current testing charges
6.1 Table-2 vi(Loss on ignition)	-	1180	Our current testing charges
6.1 Table-2 vii(Chloride content)	-	2340	Our current testing charges
6.1 Table-2 viii(Alkali content)	-	1950	Our current testing charges
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	12685	This testing charge is combined for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the ratio. Our current testing charges
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	5380	This combined testing charge is for Fe2O3 and Al2O3 to calculate the ratio. Our current testing charges
7 Table-3 i.(Fineness)	-	1950	Our current testing charges
7 Table-3 ii a(Expansion by Le Chatelier)	-	1950	Our current testing charges
7 Table-3 ii a(Expansion after aeration)	-	1950	Our current testing charges
7 Table-3 ii b(Expansion by Autoclave)	-	3510	Our current testing charges
7 Table-3 ii b(Expansion after aeration)	-	3510	Our current testing charges
7 Table-3 iii a(Setting Time Initial)	-	875	Our current testing charges
7 Table-3 iii b(Setting Time Final)	-	875	Our current testing charges
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	Our current testing charges
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	Our current testing charges
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	Our current testing charges

15 May, 2027

-
-

6122

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 455 (2015)

Portland slag cement - Specification

31620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	3040	Current testing charge of lab
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1180	Current testing charge of lab
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	Current testing charge of lab
7 Table 1 i(Fineness IS 4031(Part 2))	-	1950	Current testing charge of lab
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1950	Current testing charge of lab
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	3510	Current testing charge of lab
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	875	Current testing charge of lab
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	875	Current testing charge of lab
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	2000	Current testing charge of lab
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	2270	Current testing charge of lab
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	2660	Current testing charge of lab

15 May, 2027

-
-

6123

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC (FLY ASH BASED)

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	Current testing charge of lab
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	Current testing charge of lab
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	Current testing charge of lab
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	Current testing charge of lab
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	Current testing charge of lab
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	Current testing charge of lab
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	Current testing charge of lab
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	Current testing charge of lab
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	Current testing charge of lab
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	Current testing charge of lab
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	Current testing charge of lab
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	Current testing charge of lab
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	Current testing charge of lab
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	Current testing charge of lab

15 May, 2027

-
-

6124

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

WATER FOR CONSTRUCTION

9690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 .2(pH)	-	1750	These are our current testing charges.
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	880	These are our current testing charges.
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	1750	These are our current testing charges.
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	2340	These are our current testing charges.
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	880	These are our current testing charges.
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	880	These are our current testing charges.
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	605	These are our current testing charges.
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	605	These are our current testing charges.

15 May, 2027

-
-

6125

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

PULVERIZED FUEL ASH

41045 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	7525	These are our current testing charges
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2145	These are our current testing charges
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3810	These are our current testing charges
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	3040	These are our current testing charges
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	2340	These are our current testing charges
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	3990	These are our current testing charges
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	2340	These are our current testing charges
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1180	These are our current testing charges
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	1220	These are our current testing charges
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1950	These are our current testing charges
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2820	These are our current testing charges
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3510	These are our current testing charges
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3810	These are our current testing charges
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	3510	These are our current testing charges
7.2(Uniformity Requirements)	-	2120	These are our current testing charges
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3510	These are our current testing charges

15 May, 2027

-
-

6126

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	These are our current testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	These are our current testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	These are our current testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	These are our current testing charges.

15 May, 2027

-
-

6127

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 8042 (2015)

White portland cement - Specification (Third Revision)

41965 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the ratio. These are our current testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	These are our current testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	2340	These are our current testing charges.

15 May, 2027

-
-

6128

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16353 (2015)

Portland Cement Clinker - Specification

Portland Cement Clinker

42725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio. These are our current testing charges.
Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio. These are our current testing charges.
Clause 5 Table 1(C3S, percent by mass)	-	4965	These are our current testing charges.
Clause 5 Table 1(C3A, percent by mass)	-	5860	These are our current testing charges.
Clause 5 Table 1(C3S+C2S, percent by mass)	-	4965	These are our current testing charges.
Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3))	-	2340	These are our current testing charges.
Clause 5 Table 1(Free lime)	-	2820	These are our current testing charges.
Clause 5 Table 1(Chloride content)	-	2340	These are our current testing charges.
Clause 5 Table 1(Magnesia)	-	3040	These are our current testing charges.
Clause 5 Table 1(Alkali content)	-	1950	These are our current testing charges.
Clause 5 Table 1(Total loss on ignition)	-	1180	These are our current testing charges.
Clause 5 Table 1(Insoluble residue)	-	2340	These are our current testing charges.
6.1 IS 4031(Part 2)(Fineness)	-	1950	These are our current testing charges.
6.1 Table 2 i) a) IS 4031 (Part 3)(Soundness by Le-Chatelier method)	-	1950	These are our current testing charges.
6.1 Table 2 i) b) IS 4031 (Part 3)(Soundness by Autoclave test method)	-	3510	These are our current testing charges.
6.1 Table 2 ii) a) IS 4031 (Part 5)(Initial Setting time)	-	875	These are our current testing charges.
6.1 Table 2 ii) b) IS 4031 (Part 5)(Final Setting time)	-	875	These are our current testing charges.
6.1 Table 2 iii) a) IS 4031 (Part 6)(Compressive Strength at 72±1 h)	-	2000	These are our current testing charges.
6.1 Table 2 iii) b) IS 4031 (Part 6)(Compressive Strength at 168±2 h)	-	2270	These are our current testing charges.
6.1 Table 2 iii) c) IS 4031 (Part 6)(Compressive Strength at 672±4 h)	-	2660	These are our current testing charges.
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-	744	These are our current testing charges.
6.2 Table 3 ii) (Granulometric composition of clinker(Size 5-50 mm))	-	743	These are our current testing charges.
6.2 Table 3 i) (Granulometric composition of clinker(Size <5 mm))	-	743	These are our current testing charges.

15 May, 2027

-
-

6129

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

39695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	These are our current testing charges.
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	These are our current testing charges.
5.4.2(a)( Aggregates Impact Value)	-	3040	These are our current testing charges.
5.4.2(b)( Aggregates Impact Value)	-	3040	These are our current testing charges.
5.4.3(a)( Aggregate Abrasion Value)	-	4490	These are our current testing charges.
5.4.3(b)( Aggregate Abrasion Value)	-	4490	These are our current testing charges.
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	2340	These are our current testing charges.
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	2340	These are our current testing charges.
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1180	These are our current testing charges.
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1180	These are our current testing charges.
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	5320	These are our current testing charges.
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	5950	These are our current testing charges.
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	980	These are our current testing charges.
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2145	These are our current testing charges.
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	0	These are our current testing charges.
5.5(Soundness By Magnesium Sulphate)	-	5950	These are our current testing charges.
5.3(Elongation Index)	-	870	These are our current testing charges.
5.3(Flakiness Index)	-	870	These are our current testing charges.

15 May, 2027

-
-

6130

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16715 (2018)

Ultrafine Ground Granulated Blast Furnace Slag - Specification

64290 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4 and 5.1(Loss on ignition)	-	1180	Complete testing charge is from current BIS approved scope valid upto 15.05.24.
Clause 4 and 5.1(Manganese oxide (MnO))	-	1950	These are our current Testing charges.
Clause 4 and 5.1(Magnesium oxide (MgO))	-	3040	These are our current Testing charges.
Clause 4 and 5.1(Sulphide sulphur (S))	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Sulphate (as SO3),)	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Insoluble residue)	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Chloride content)	-	2340	These are our current Testing charges.
Clause 4 and 5.1((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3))	-	0	These are our calculated values.
Clause 4 and 5.1((CaO+MgO+Al2O3)/ SiO2)	-	0	These are our calculated values.
Clause 4 and 5.1((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO))	-	0	These are our calculated values.
6 and Table 2 i(Fineness (optional), BET Method(Nitrogen adsorption) IS 11578)	-	19965	These are our current Testing charges.
6 and Table 2 ii a(Particle size -D50)	-	7500	These are our current Testing charges.
6 and Table 2 ii b(Particle size -D95)	-	7500	These are our current Testing charges.
6 and Table 2 iii a(Slag activity index -7 days)	-	6495	These are our current Testing charges.
6 and Table 2 iii b(Slag activity index -28 days)	-	7300	These are our current Testing charges.

15 May, 2027

-
-

6131

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16993 (2018)

Microfine Ordinary Portland Cement ” Specification

50920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 -Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	Complete testing charges are the existing BIS charges in our current scope valid till 15.05.2024.
5 -Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
5 -Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	These are our current testing charges.
5 -Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These are our current testing charges.
5 -Table - 1 ix( (Additional requirements) for microfine sulphate resisting Portland cement: a) Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	5860	These are our current testing charges.
5 -Table - 1 ix((Additional requirements) for microfine sulphate resisting Portland cement: b) Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate (C2AF + 2C2A) - Cl 4 of IS 4032:1985)	-	8200	These are our current testing charges.
6 and Table 2 i(Fineness (optional) IS 11578)	-	1950	These are our current testing charges.
6 and Table 2 ii a(Particle size, D50, Using laser diffraction PSD analyzer)	-	7500	These are our current testing charges.
6 and Table 2 ii b(Particle size, D95, Using laser diffraction PSD analyzer)	-	7500	These are our current testing charges.
6 and Table 2 iii a(Setting Time Initial)	-	875	These are our current testing charges.
6 and Table 2 iii b(Setting Time Final)	-	875	These are our current testing charges.
6 and Table 2 iv(Bleeding test at 3 h from the time of mixing)	-	12100	These are our current testing charges.
6 and Table 2 v a(Compretsive Strenqth .3 days IS 4031(Part 8))	-	2000	These are our current testing charges.
6 and Table 2 v b(Compretsive Strenqth 7 days IS 4031(Part 8))	-	2270	These are our current testing charges.
6 and Table 2 v c(Compretsive Strenqth 28 days IS 4031(Part 8))	-	2660	These are our current testing charges.

15 May, 2027

-
-

6132

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1344 (1981)

Specification for Calcined Clay Pozzolana

26210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.2(Silica)	-	2145		Complete testing charges are BIS approved charges in our scope and are valid upto 15.05.2024.

15 May, 2027

-
-

6133

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 12089 (1987)

Specification for granulated slag for the manufacture portland slag cement

23735 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Physical State)	-	980	These are our current testing charges.
3.2(composition of granulated slag, Manganese Oxide)	-	1950	These are our current testing charges.
3.2(composition of granulated slag, Magnesium Oxide)	-	3040	These are our current testing charges.
3.2(composition of granulated slag, Sulphide Sulphur)	-	2340	These are our current testing charges.
3.3(percentages of major oxides)	-	13085	These are our current testing charges.
3.4(insoluble residue of dried samples)	-	2340	These are our current testing charges.

15 May, 2027

-
-

6134

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

44395 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	12685	These are our current testing charges.
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
4.1 - Table - 1 v(Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	5860	These are our current testing charges.
4.1 - Table - 1 vi(Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-	8200	These are our current testing charges.
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	These are our current testing charges.
5.1(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
5.2.1.1(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
5.2.1.1(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
5.3 a)(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
5.3 b)(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
5.4(Salphate Expansion (Optional))	-	9060	These are our current testing charges.
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
5.6(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	These are our current testing charges.

15 May, 2027

-
-

6135

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 12600 (1989)

Portland cement, low heat - specification

49185 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These are our current testing charges.
5.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
5.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
5.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
5.1 - Table - 1 v( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	These are our current testing charges.
5.2(Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-	5160	These are our current testing charges.
5.1 - Table - 1 note 2(Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-	1950	These are our current testing charges.
6.1(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
6.2.1.1(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
6.2.1.1(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
6.4 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
6.4 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
6.4 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	These are our current testing charges.
6.7 a)(Heat of Hydration- IS 4031 Part 9)	-	5950	These are our current testing charges.
6.7 b)(Heat of Hydration- IS 4031 Part 9)	-	5950	These are our current testing charges.

15 May, 2027

-
-

6136

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 6909 (1990)

Supersulphated cement ? specification

23560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
5.1(Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-	3040	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
5.1(Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-	2340	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
5.1(Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-	2340	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.1(Fineness 4031 Part 2)	-	1950	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.2(Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-	1950	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.4 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.4 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.
6.4 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	The complete testing charges are BIS approved charges valid till 15.05.2024. Individual testing charges are current charges of lab.

15 May, 2027

-
-

6137

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

13650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	0	Calculated parameter
5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	0	Calculated parameter
5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	Lab's current charges
5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	Lab's current charges
5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	Lab's current charges
5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	Lab's current charges
6.1(Fineness 4031 Part 2)	-	1950	Lab's current charges
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	Lab's current charges
6.2.1.1(Expansion after aeration - 4031 Part 3)	-	1950	Lab's current charges
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	Lab's current charges
6.2.1.1(Expansion after aeration- 4031 Part 3)	-	3510	Lab's current charges
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	Lab's current charges
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	Lab's current charges
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	1770	Lab's current charges
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	Lab's current charges

15 May, 2027

-
-

6138

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17261 (2022)

Textiles - Polyester continuous filament fully drawn yarns - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification (IS 17261))	-	1500	-
5(Designation ( IS 17261))	-	7500	-
6.1 & Table-3(Linear Density)	-	2500	-
6.1 & Table-3(Uneveness U)	-	10500	-
6.1 & Table-3(Tenacity)	-	2500	-
6.1 & Table-3(Elongation)	-	2500	-
6.2 & Table-4(Moisture regain ( IS17261))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2500	-
6.2 & Table-4(Finish oil pick-up ( IS17261))	-	2500	-
6.2 & Table-4(Phosphorus content ( IS17261))	-	2500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	50000	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 (Part-2))	-	50000	-
6.2 & Table-4(Anti-microbial activity value (IS/ISO 20743))	-	35000	-
6.2 & Table-4(Colour strength with reference to standard yarn ( IS17261))	-	2500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE ( IS17261))	-	2500	-
6.3(Freedom From Defects)	-	3500	-
6.4 & Table-5(Lustre/Brightness TiO2 Content)	-	4500	-
6.5 & Table-6(Colour Fastness Rating To Light Change in colour)	-	7500	-
6.5 & Table-7(Colour Fastness Rating To Washing Change in colour)	-	3500	-
6.5 & Table-8(Colour Fastness Rating To Washing Staining)	-	3500	-
6.5 & Table-9(Colour Fastness Rating To Rubbing Dry)	-	3500	-
6.5 & Table-10(Colour Fastness Rating To Rubbing Wet)	-	3500	-
6.5 & Table-11(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour)	-	3500	-
6.5 & Table-12(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining)	-	3500	-
6.7 & table-7(Free and releasable formaldehyde)	-	9500	-
6.7 & table-7(Mercury (IS 15651))	-	0	-
6.7 & table-7(Chromium III (IS 15651))	-	0	-
6.7 & table-7(Chromium VI (IS 15651))	-	0	-
6.7 & table-7(Lead (IS 15651))	-	0	-
6.7 & table-7(Cadmium (IS 15651))	-	0	-
6.7 & table-7(Copper (IS 15651))	-	0	-
6.7 & table-7(Antimony (IS 15651))	-	0	-
6.7 & table-7(Pentachlorophenol (IS 15651))	-	0	-
6.7 & table-7(Pesticides (IS 15651))	-	0	-
6.7 & table-7(Banned Pesticides (IS 15651))	-	0	-
6.7 & table-7(Banned azo colourants (arylamines) (IS 15570))	-	0	-
8(Marking (IS 17261))	-	0	-
6.7 & Table 7(Colour Fastness Rating To Light Change in colour (IS/ISO 105-B01 or IS/ISO 105-B02))	-	3500	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	40000	-
6.1 Table -3(Boiling water shrinkage, IS 17087)	-	2500	-
6.1 Table -3(Interlace as nips per metre, Annex B of IS 17262)	-	2500	-
6.1 Table -3(No. of filaments in multifilament yarn)	-	2500	-
6.2- Table -4, Sl no. 2 (a)(Isophthalic acid (IPA) content in Virgin polyester yarn, Percent, Annex C of IS 16481)	-	2500	-
6.2- Table -4, Sl no. 2 (b)(Isophthalic acid (IPA) content in Dope dyed/white yarn, Percent, Annex C of IS 16482)	-	2500	-
6.2- Table -4, Sl no. 2 (c)(Isophthalic acid (IPA) content in Recycled polyester yarn, Percent, Annex C of IS 16483)	-	2500	-
6.6(Commercial Mass, IS 7703)	-	0	-
6.5 Table 6(Colour Fastness to Light)	-	7500	-
6.5 Table 6(Colour Fatness to Washing, Test 2)	-	3500	-
6.5 Table 6(Colour Fastness to Rubbing)	-	3500	-
6.5 Table 6(Colour Fastness to perspiration)	-	3500	-
6.2 Table 4(Moisture Regain , %)	-	2000	-
6.2 Table 4(Water soluble matter %)	-	2500	-
6.2 Table 4(Finish oil pickup, %)	-	2500	-
6.2 Table 4(Phosphorus content , %)	-	2500	-
6.2 Table 4(Phosphorus content , %)	-	2500	-
6.2 Table 4(Colour strength with refernce to standard yarn, %)	-	2500	-
6.2 Table 4(Colour difference with referece standard yarn, measure as DE)	-	2500	-
6.1 Table 3(Linear Density ,Denier (dtex))	-	2500	-
6.1 Table 3(Unevenness ,(U %))	-	2500	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2500	-
6.1 Table 3(Elongation %)	-	2500	-
6.1 Table 3(Boiling Water Shrinkage %)	-	2500	-

08 May, 2028

-
-

6139

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 17450 (2020)

1,3 Phenylenediamine ” Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 17450:2020)	-	200	-
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	2000	-
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	1950	-
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	1950	-
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	1700	-
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	1700	-
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.2, 4.3 Table 1 v)(Other unknown impurities - IS 17450:2020)	-	0	-
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.2, 4.3 Table 1 v)(Other unknown impurities - IS 17450:2020)	-	0	Already Mentioned
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.2, 4.3 Table 1 v)(Other unknown impurities - IS 17450:2020)	-	0	Already Mentioned
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.1(Description - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (i)(Purity - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (ii)(1,2 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(1,4 Phenylenediamine - IS 17450:2020)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iv)(Set Point IS 5299:2001)	-	0	Already Mentioned
3.2, 5.3.1 Table 1 (iii)(Moisture by Karl Fischer IS 5299:2001)	-	0	Already Mentioned
3.2, 4.3 Table 1 v)(Other unknown impurities - IS 17450:2020)	-	0	Already Mentioned

-
Included w.e.f.28.03.2025

6140

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

3750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	3750	Complete testing charges
4.1(Sample preparation as per clause 8 of IS 9873 Part 3:1999)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-i(Sb)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-ii(As)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-iii(Ba)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-iv(Cd)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-v(Cr)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-vi(Pb)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-vii(Hg)	-	3750	Complete testing charges
Cl-4.1 & 4.2,Table 1,sl.no-viii(Se)	-	3750	Complete testing charges

-
Included w.e.f.20.06.2025

6141

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	11900	For complete testing
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	11900	For complete testing
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	11900	For complete testing
4.7(pH value - ISO 787-9)	-	11900	For complete testing
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	11900	For complete testing
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	11900	For complete testing
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	11900	For complete testing
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	11900	For complete testing
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	11900	For complete testing
4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	11900	For complete testing
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	11900	For complete testing
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	11900	For complete testing
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	11900	For complete testing
4.7(pH value - ISO 787-9)	-	11900	For complete testing
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	11900	For complete testing
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	11900	For complete testing
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	11900	For complete testing

-
Included w.e.f.20.06.2025

6142

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18507 (2024)

Drywall Screws ï¿½ Specification

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	0	-
4.1.2 and A.4.1.2(Maximum height)	-	0	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	0	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	0	-
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	0	-
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	0	-
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	0	-
4.1.4.4 and 6.7.2 (Motion rides)	-	0.02	-
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	0	-
4.1.4.5 (Slides)	-	0	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	0	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	0	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	0	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	0	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	0	-
4.3(Rung ladders, stepladders and stairways)	-	0	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	0	-
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	0	-
4.3 c(The surface of the tread shall not be slippery)	-	0	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	0	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	0	-
4.3 f(The inclination of stairways)	-	0	-
4.3 f(The inclination of stepladders)	-	0	-
4.3 f(The inclination of rung ladders)	-	0	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	0.02	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	0	-
4.4.1 (Head and neck entrapment)	-	0	-
4.4.2(Entrapment of clothing and hair)	-	0	-
4.4.3(Entrapment of feet)	-	0	-
4.4.4(Entrapment of fingers)	-	0.02	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	0	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	0	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	0.02	-
4.6.1 and A.4.6.(Stability of slides)	-	0	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	0	-
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0.01	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	0.01	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0.02	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	0	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	0	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	0	-
4.7.3.1(Swings intended for children under 36 months)	-	0	-
4.7.3.1(Swings intended for children under 36 months)	-	0	-
4.7.3.2(Toddler swings without a crossbeam)	-	0	-
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	0	-
4.7.4(Impact from swing elements - Average surface compression)	-	0	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	0	-
4.7.5(Free swinging elements)	-	0	-
4.7.5(Elements excluding free swinging)	-	0	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	0	-
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	0	-
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	0	-
4.7.8 d and A.4.7.8(Accessible chains)	-	0	-
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	0.01	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	0	-
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	0	-
4.8(Seesaws )	-	0.02	-
4.9(Carousels and rocking toys)	-	0	-
4.9(Carousels and rocking toys)	-	0	-
4.9(Free height of fall for carousels and rocking toys)	-	0	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	0	-
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	0	-
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	0	-
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	0	-
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	0	-
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	0	-
4.10.4.4 and A.4.10(Safe collapse)	-	0	-
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	0	-
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	0	-
4.11.1(Paddling pools - General)	-	0	-
4.11.2(Edges, points, and small parts)	-	0	-
4.11.2(Edges, points, and small parts)	-	0	-
4.11.3(Paddling pools with inflatable walls)	-	0	-
4.11.3(Paddling pools with inflatable walls)	-	0	-
5.1(Labelling)	-	0.02	-
5.2(Assembly and installation instructions)	-	0.02	-
5.3(Maintenance instructions)	-	0	-
5.4(Warnings)	-	0	-
4.1.1 and 6.2.1( Strength of toys other than swings)	-	0	-
4.1.2 and A.4.1.2(Maximum height)	-	0	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	0	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	0.01	-
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	0	-
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	0	-
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	0.01	-
4.1.4.4 and 6.7.2 (Motion rides)	-	0	-
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	0	-
4.1.4.5 (Slides)	-	0	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	0	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	0	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	0	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	0	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	0.03	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	0	-
4.3(Rung ladders, stepladders and stairways)	-	0.02	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	0	-
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	0	-
4.3 c(The surface of the tread shall not be slippery)	-	0	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	0	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	0	-
4.3 f(The inclination of stairways)	-	0	-
4.3 f(The inclination of stepladders)	-	0	-
4.3 f(The inclination of rung ladders)	-	0	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	0	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	0	-
4.4.1 (Head and neck entrapment)	-	0	-
4.4.2(Entrapment of clothing and hair)	-	0	-
4.4.3(Entrapment of feet)	-	0	-
4.4.4(Entrapment of fingers)	-	0	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	0	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	0	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	0	-
4.6.1 and A.4.6.(Stability of slides)	-	0	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	0	-
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	0	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.6.4 and A.4.6.(Roller slides)	-	0	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	0	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	0	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	0	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	0	-
4.7.3.1(Swings intended for children under 36 months)	-	0	-
4.7.3.1(Swings intended for children under 36 months)	-	0	-
4.7.3.2(Toddler swings without a crossbeam)	-	0	-
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	0	-
4.7.4(Impact from swing elements - Average surface compression)	-	0	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	0.02	-
4.7.5(Free swinging elements)	-	0	-
4.7.5(Elements excluding free swinging)	-	0	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	0	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	0	-
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	0	-
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	0	-
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	0	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	0	-
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	0	-
4.8(Seesaws )	-	0	-
4.9(Carousels and rocking toys)	-	0	-
4.9(Carousels and rocking toys)	-	0	-
4.9(Free height of fall for carousels and rocking toys)	-	0	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	-
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.1 and A.4.10(Containment - General)	-	0	-
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	0.03	-
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	0	-
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	0	-
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	0	-
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	0	-
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	0	-
4.10.4.4 and A.4.10(Safe collapse)	-	0	-
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	0	-
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	0	-
4.11.1(Paddling pools - General)	-	0	-
4.11.2(Edges, points, and small parts)	-	0	-
4.11.2(Edges, points, and small parts)	-	0	-
4.11.3(Paddling pools with inflatable walls)	-	0	-
4.11.3(Paddling pools with inflatable walls)	-	0	-
5.1(Labelling)	-	0	-
5.2(Assembly and installation instructions)	-	0	-
5.3(Maintenance instructions)	-	0	-
5.4(Warnings)	-	0	-
Clause. 4.0(Dimenssions.)	-	5000	For dimension and other qualitative tests
Clause. 4.0(Thread size.)	-	5000	For dimension and other qualitative tests
Clause. 4.0(Length)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Material)	-	5000	For chemical tests (material )
Clause. 5.0(Cross Recess)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Tolerances)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Surface Condition)	-	3500	For surface condition and coating tests
Clause. 5.0(Surface Coating)	-	3500	For surface condition and coating tests
Clause. 5.0(Acceptability)	-	4999.99	For dimension and other qualitative tests
Clause.6.0(Torque Testing)	-	6000	For complete mechanical tests
Clause.7.0(Hardness)	-	6000	for complete mechanical tests
Clause.8.0(Designation)	-	5000	For dimension and other qualitative tests
Clause.9.0(Marking)	-	5000	For dimension and other qualitative tests

-
Included w.e.f.20.06.2025

6143

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	0	-
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	0	-
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	0	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	0	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	0	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	0	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	0	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	0	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	0	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	0	-
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	0	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	0	-
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	0	-
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	0	-
4.1(General)	-	0	-
Clause. 4.0(Dimenssions.)	-	5000	For dimension and other qualitative tests
Clause. 4.0(Thread size.)	-	5000	For dimension and other qualitative tests
Clause. 4.0(Length)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Material)	-	5000	For chemical tests (material)
Clause. 5.0(Cross Recess)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Tolerances)	-	5000	For dimension and other qualitative tests
Clause. 5.0(Surface Condition)	-	3500	For Surface condition and coating tests
Clause. 5.0(Surface Coating)	-	3500	For Surface condition and coating tests
Clause.6.0(Acceptability)	-	5000	For dimension and other qualitative tests
Clause.6.0(Torque Testing)	-	6000	For complete mechanical tests
CClause.7.0(Hardness)	-	6000	For complete mechanical tests
Clause.8.0(Designation)	-	5000	For dimension and other qualitative tests
Clause.9.0(Marking)	-	5000	For dimension and other qualitative tests

-
Included w.e.f.20.06.2025

6144

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

64900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	1000	-
Cl-5(Design)	-	1000	-
Cl-6(Size and Fittings)	-	1000	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	6000	Upper to midsole/outsole-Rs 2000/- Upper to composite sole- Rs 2000/- Outsole to midsole-Rs 2000/-
Cl.7.1.2(Energy Absorption at Seat Region)	-	2000	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	-
Cl.7.1.3(Complete Shoe Flexing)	-	4000	-
Cl.7.1.4(Washability)	-	5500	-
Cl.7.1.5(Slip Resistance)	-	5500	-
Cl.7.1.6(Heel Drop)	-	1000	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	2000	Dry condition- Rs 1000/- Wet condition- Rs 1000/-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	1000	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	3000	Dry- Rs 1500/- Wet- Rs 1500/-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	2000	water vapour permeability- Rs 1000/- Water vapour coefficient- Rs 1000/-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	1000	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	5000	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	1000	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	1000	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	3000	Dry- Rs 1500/- Wet- Rs 1500/-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	1000	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	1000	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	3000	Dry- Rs 1500/- Wet- Rs 1500/-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	2000	water vapour permeability- Rs 1000/- Water vapour coefficient- Rs 1000/-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	1500	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	5000	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	1000	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	3000	Dry- Rs 1500/- Wet- Rs 1500/-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	1000	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	2000	water vapour permeability- Rs 1000/- Water vapour coefficient- Rs 1000/-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	1000	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	1500	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	3000	Water absorption- Rs 1500/- Water desorption- Rs 1500/-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	3000	Dry- Rs 1500/- Wet- Rs 1500/-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	3000	Water absorption- Rs 1500/- Water desorption- Rs 1500/-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	1000	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	1000	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1500	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	1500	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	1000	Complete Testing Charges
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	1000	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	1000	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	1000	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	1000	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	1000	-
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	1000	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	0	Cl 7.8 Table 9, S.no.1 to S.no. 4- Total Rs 2500/-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	0	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	0	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1000	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	3000	Peel strength, initial- Rs 1500/- Peel strength, After 5000 cycle- Rs 1500/-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	3000	shear strength, initial- Rs 1500/- shear strength, After 5000 cycle- Rs 1500/-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	1000	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	1000	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	1000	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1000	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	1000	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	1000	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	1000	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	1000	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	Chemical requirement- Rs 35000/-, Lead content- Rs 2500/-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	0	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl-7.12.2(PVC is present in sports shoe)	-	0	-
Cl- 8.1(Marking)	-	500	-

25 Feb, 2027

-
-

6145

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

8166826

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Plasma /LCD/LED TV of screen sizes upto 150 inches

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	0	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	11000	-
8(Constructional requirements with regard to the protection against electric shock)	-	10000	-
9(Electric shock hazard under normal operating conditions)	-	9000	-
10(Insulation requirements)	-	15000	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	12000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
14(Components)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-

-
-

6146

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	400	-
Clause.4.0(Sulphur)	-	400	-
Clause.4.0(Sulphur)	-	0	-
Clause.4.0(Phosphorus)	-	400	-
Clause.4.0(Silicon)	-	400	-
Clause.4.0(Manganese)	-	400	-
Clause.5.0(Supply of Material)	-	0	-
Clause.5.0(Supply of Material)	-	0	-
Clause.6.0(Workmanship)	-	0	-
Clause.7.0(Straightness)	-	0	-
Clause.8.0(Basis of Calculation)	-	0	-
Clause.9.0(Length)	-	0	-
Clause.10.0(Dimensions and properties)	-	300	-
Clause.10.0(Dimensions and properties)	-	0	-
Clause.11.0(General)	-	0	-
Clause.11.0(Outside Dimension)	-	100	-
Clause.11.0(Thickness)	-	100	-
Clause.11.0(Thickness)	-	0	-
Clause.11.0(Concavity and Convexity)	-	100	-
Clause.11.0(Squareness of Sides)	-	100	-
Clause.11.0(External Corner Radiius)	-	100	-
Clause.11.0(Straightness and twist)	-	100	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.12.0(Dimension Tolerances)	-	0	-
Clause.13.0(Surface Protection)	-	0	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	1200	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1200	-
Clause.18.0(Marking)	-	100	-
6(Workmanship)	-	0	-
10(Dimensions and Properties)	-	0	-
11(Measurement of Shape and Size)	-	300	-
12(Dimensions and Tolerances)	-	0	-
13(Surface Protection)	-	0	-
15(Tensile Test)	-	0	-

19 Apr, 2028

-
Included w.e.f 07.05.2025

6147

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

380000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	80000	-
7(Cooling Capacity Test)	-	50000	-
8(Freezing Capacity Test)	-	50000	Testing Charges for DC refrigerator :Nil
9("Automatic Ice-Making Capacity Test")	-	50000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	50000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	50000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	50000	Testing Charges for DC refrigerator :Nil
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	0	Rs.50,000/- Testing Charges covered in Part 1.

20 Jun, 2028

-
-

6148

FARE Labs Pvt. Ltd., Gurugram

8135716

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

14600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	1250	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	1250	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	Duplication on LIMS
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	Duplication on LIMS
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1250	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1250	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1250	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	Duplication on LIMS
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	Duplication on LIMS
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	Duplication on LIMS
Cl no.4.1(General)	-	250	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	700	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	800	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	800	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	800	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	700	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	700	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	Duplication on LIMS
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	800	-
4.1(General)	-	0	Duplication on LIMS
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	250	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	Duplication on LIMS
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	Duplication on LIMS
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	Duplication on LIMS
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	Duplication on LIMS
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	Duplication on LIMS
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	Duplication on LIMS
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	Duplication on LIMS
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	Duplication on LIMS
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	Duplication on LIMS
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1250	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	Duplication on LIMS
Cl no.5(Packing and marking)	-	250	-
Cl no.4.2(Ingredients)	-	250	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	0	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	0	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	0	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	-
Cl no.4.1(General)	-	0	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	0	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	0	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	0	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	0	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	0	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	0	-
4.1(General)	-	0	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	0	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	-
Cl no.5(Packing and marking)	-	0	-
Cl no.4.2(Ingredients)	-	0	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	0	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	0	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	0	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	-
Cl no.4.1(General)	-	0	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	0	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	0	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	0	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	0	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	0	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	0	-
4.1(General)	-	0	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	0	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	-
Cl no.5(Packing and marking)	-	0	-
Cl no.4.2(Ingredients)	-	0	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	0	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	0	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	0	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	-
Cl no.4.1(General)	-	0	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	0	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	0	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	0	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	0	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	0	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	0	-
4.1(General)	-	0	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	0	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	-
Cl no.5(Packing and marking)	-	0	-
Cl no.4.2(Ingredients)	-	0	-
Cl-4.2.4(Aflatoxin B1)	-	0	-
Cl-4.2.3(material)	-	0	-

09 Mar, 2029

-
Included w.e.f.16.04.2025 Exclusion Cl 4.2.1 Ingredients

6149

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

Low voltage switchgear and control gear - Contactors and Motor Starters

2064566 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	0	-
8.1.2.1(General materials requirements)	-	0	-
8.1.2.2(Glow wire testing)	-	20000	Test Charges will vary depending on the rating, tripping class, DC rating of the sample Test charge applicable will be intimated through a proforma invoice + taxes
8.1.2.3(Test based on flammability category)	-	0	No feasibility
8.1.3(Current-carrying parts and their connections)	-	0	-
8.1.4(Clearances and creepage distances)	-	10000	-
8.1.5.1(Insulation)	-	0	-
8.1.5.2(Direction of movement)	-	0	-
8.1.5.3(Mounting)	-	0	-
8.1.5.4(Protection)	-	0	-
8.1.8(Terminals)	-	0	-
8.1.8.1(General)	-	0	-
8.1.8.2(Terminal identification and marking)	-	0	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	0	-
8.1.10(Provisions for protective earthing)	-	0	-
8.1.11(Enclosures for equipment)	-	0	-
8.1.11.1(Design)	-	0	-
8.1.11.2(Insulation)	-	0	-
8.1.12(Degrees of protection of enclosed equipment)	-	40000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	30000	-
8.1.14(Limited energy source)	-	10000	-
8.1.14.1(General)	-	0	-
8.1.14.2(Limited energy source with galvanic separation)	-	20000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	20000	-
8.1.15(Stored charge energy circuit)	-	0	-
8.1.16(Fault and abnormal conditions)	-	20000	-
8.1.17(Short-circuit and overload protection of ports)	-	25000	-
8.2(Performance requirements)	-	0	-
8.2.1.1.1(General conditions)	-	0	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	20000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	20000	-
8.2.1(Operating conditions)	-	0	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	20000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	0	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	35000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	35000	-
8.2.1.5.1.2(Thermal memory test verification)	-	25000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	35000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	35000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	35000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	35000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	35000	-
8.2.2(Temperature-rise)	-	40000	-
8.2.2.3(Accessible parts)	-	0	-
8.2.2.4(Ambient air temperature)	-	0	-
8.2.2.5(Main circuit)	-	0	-
8.2.2.6(Control circuits)	-	0	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	20000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Voltage limiting components between circuits)	-	0	-
8.2.4.3.1(Mechanical durability)	-	96000	-
8.2.4.3.2(Electrical durability)	-	144000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	25000	-
8.2.4.6(Pole impedance)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	60000	-
8.2.5.1(Performance under short-circuit conditions)	-	60000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	60000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	60000	-
8.3(Electromagnetic compatibility (EMC))	-	400000	-
8.3.2(Immunity)	-	320000	-
8.3.3(Emission)	-	80000	-
9.1.5.2(Environment tests)	-	280000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	25000	-
9.2.4(Limited energy source test)	-	20000	-
9.2.5(Breakdown of components)	-	20000	-
9.2.5.2(Breakdown of components test)	-	20000	-
9.3.3.2(Operating limits)	-	80000	-
9.3.3.2.1.2(Coil power consumption)	-	40000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	90000	-
9.3.3.3.1(Ambient air temperature)	-	0	-
9.3.3.3.2(Measurement of the temperature of parts)	-	0	-
9.3.3.3.3(Temperature-rise of a part)	-	0	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	40000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	30000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	35000	-
9.3.3.6(Operational performance capability)	-	90000	-
9.3.4.2.2(prospective current)	-	0	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	60000	-
9.3.5(Overload current withstand capability of contactors)	-	45000	-
9.3.6.2(Operation and operating limits)	-	80000	-
9.3.6.3(Dielectric tests)	-	10000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	45000	-
9.4.2(Immunity)	-	320000	-
9.4.2.2(Electrostatic discharge)	-	30000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	120000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	30000	-
9.4.2.5(Electrical fast transient/bursts)	-	30000	-
9.4.2.6(Surges)	-	50000	-
9.4.2.7(Power frequency magnetic field)	-	30000	-
9.4.2.8(Voltage dips and short-time interruptions)	-	30000	-
9.4.2.9(Harmonics in the supply)	-	0	-
9.4.3(Emission)	-	80000	-
F.7.2(Tests on products in a new condition)	-	20000	-
F.7.3(Test after conventional operational performance)	-	90000.02	-
H.3(Limits of operation of control functions)	-	40000	-
H.4(Test of the control functions)	-	40000	-
M.8.3(Electromagnetic compatibility (EMC))	-	400000	-
M.9.4(Thermal cycling test)	-	120000	-
M.9.5(Climatic test)	-	180000	-
M.9.7(Critical load current test)	-	20000	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	40000	-
M.9.11(Clearance and creepage distances)	-	10000	-
N.3.2(Touch current measurement)	-	15000	-
P.2.3(Verification of operational performance capability)	-	90000	-
P.2.4.2(Test voltage)	-	10000	-
P.2.4.3(Application of the test voltage)	-	0	-
P.4(Test of MPSD for IT system)	-	95000	-
Q.5.3(Selectivity determined by test)	-	95000	-

-
Exclusions: 8.1.2.3 (Test based on flammability category), 8.1.12 (Degrees of protection of enclosed equipment), 9.4.2.9 (Harmonics in the supply), M.9.9 (Degree of protection of enclosed contactors)

6150

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

47860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	500	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	850	Width, linear density & colour of tape
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	400	length & width of bottom panel
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	150	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	150	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	450	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	900	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1600	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	650	-
5.3(Lamination)	-	700	unlaminated fabric mass
5.4(Sack Fabrication)	-	2200	top fold height, stitch distance from edge, inner diameter of grommet, double row stitch dimension, stitches/dm, length, mass & linear density of stitching thread
5.5(Capacity)	-	550	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	400	length & width of open top
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	450	mass of bale of sacks
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	18180	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	200	height
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	450	laminated fabric mass
Clause 5.4(Sack Fabrication)	-	19080	Fibre Identification, breaking load of stitching yarn, UV exposure for stitching yarn
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-

-
Included w.e.f 04.03.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number