BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6241

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

TYPE- I & II

18993.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	1050	Material Identification
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	-
4.2(Tapes – Linear Density )	-	700	For complete tape testing, IS 6192:2023 charges will be taken.
4.2(Construction)	-	0	-
4.3(Sacks)	-	500	For Visual Inspection
4.3.1(Bottom Seam)	-	500	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	1050	Material Identification
4.4(Mass of the loose liner )	-	500	For GSM
4.4(Width of the loose liner)	-	500	500.00 for liner Visual, Length, width & Thickness
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	for all kind of sack dimensions
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	Rs. 10180.00 for UV Resistance 1100.00 for Lengthwise strength 1100.00 for widthwise strength
5.2 and Table 1 x(Ash content )	-	1200	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	0	-
5.3(UV Resistance)	-	0	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	0	-

-
Included w.e.f. 13.02.2025

6242

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18480 : Part 1 (2023)

Cross Recessed Tapping Screws: Part 1 Pan Head

All Grade / Type / Size / Designation as per IS 18480-1: 2023

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	1270	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	17110	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-
Clause. 3.0(Dimenssions.)	-	0	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	0	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross Recess)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	0	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f. 03.03.2025

6243

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18509 (2024)

Cross-recessed Countersunk Head Wood Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18509 : 2024

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	580	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Thread And Screw ends)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	16530	-
Clause. 5.0(Surface Coating)	-	460	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
Clause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Thread And Screw ends)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
Clause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.03.03.2025

6244

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	130	-
Cl 3.2(Material used for composite bottom)	-	130	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	130	-
Cl 3.4(Material used for stainless steel lid)	-	130	-
Cl 3.5(Material used for tempered glass lid)	-	130	-
Cl 3.5(Material used for stainless steel rim)	-	130	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	130	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	130	-
Cl 4.2(Thickness of the finished utensil)	-	130	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	130	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	130	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	130	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	130	-
Cl 5.1(Manufacturing defect & visual appearance)	-	130	-
CL 5.2(Accessibility for cleaning)	-	130	-
Cl 5.3(Joining of handles to the utensils)	-	130	-
Cl 5.4(Requirement for handles)	-	130	-
Cl 5.5(Welding (Finish))	-	130	-
Cl 5.6(Finish of 3-ply utensil)	-	130	-
Cl 5.7(Requirement for coating)	-	130	-
Cl 5.8(Coating thickness test)	-	130	-
Cl 5.8.1(Thermal shock test (Coating))	-	130	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	130	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	130	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	130	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	130	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	130	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	130	-
Cl 6.7(Nominal Capacity Test)	-	130	-
Cl 8(Marking)	-	130	-
3.1(a) Carbon)	-	130	-
3.1(b) Silicon)	-	130	-
3.1(c)Manganese)	-	130	-
3.1(d) Nickel)	-	130	-
3.1(Chromium)	-	130	-
3.1(Sulphu)	-	130	-
3.1(Phosphorus)	-	130	-
Stainless Steel Utensils - Specification (THIRD REVISION)(Copper)	-	130	-
3.1(Nitrogen)	-	130	-
3.2 a(a) Carbon)	-	130	-
3.2 a(b) Silicon)	-	130	-
68995(Manganese)	-	130	-
3.2 a(d) Nickel)	-	130	-
3.2 a(Chromium)	-	130	-
3.2 a(Sulphur)	-	130	-
3.2 a(g) Phosphorus)	-	130	-
3.2 a(h) Copper)	-	130	-
3.2 b(c) Magnesium)	-	130	-
3.2 b(d) Silicon)	-	130	-
3.2 a(Nitrogen)	-	130	-
3.2 b(a) Aluminium)	-	130	-
3.2 b(b) Copper)	-	130	-
3.2 b(e) Iron)	-	130	-
3.2 b(f) Manganese)	-	130	-
3.2 b(d) Silicon)	-	130	-
3.2 b(e) Iron)	-	130	-
3.2 b(f) Manganese)	-	130	-
3.2 b(g) Zinc)	-	130	-
3.2 b(h) Titanium)	-	130	-
3.2 b(i) Chromium)	-	130	-
3.2 b(j) Cu+Si+Fe+Mn+Zn+mg)	-	130	-
3.2 b(k) Lead)	-	130	-
3.2 c(a) Carbon)	-	130	-
3.2 c(b) Silicon)	-	130	-
3.2 c(c) Manganese)	-	130	-
3.2 c(d) Nickel)	-	130	-
3.2 c(e) Chromium)	-	130	-
3.2 c(f) Sulphur)	-	130	-
3.2 c(g) Phosphorus)	-	130	-
3.3(a) Inner layer)	-	130	-
3.3(b) Middlelayer)	-	130	-
3.3(c) Outerlayer)	-	130	-
3.4(a) Carbon)	-	130	-
3.4(b) Silicon)	-	130	-
3.4(c) Manganese)	-	130	-
3.4(d) Nickel)	-	130	-
3.4(e) Chromium)	-	130	-
3.4(f) Sulphur)	-	130	-
3.4(g) Phosphorus)	-	130	-
3.4(h) Copper)	-	130	-
3.4(i) Nitrogen)	-	130	-
3.4(Thickness stainless steel lid)	-	130	-
3.5(If the utensils provided with tempered glass lid)	-	130	-
4.1(Shapes and Dimensions)	-	130	-
4.2(Thickness of the sheet)	-	130	-
4.4(Thickness of 3ply full body utensil)	-	130	-
5(Workmanship and finish)	-	130	-
5.4(Handles)	-	130	-
4.1 of IS 13395(Construction)	-	130	-
4.2 of IS 13395(Materials)	-	130	-
4.4 of Is 13395(Position of Handle and Knob with Respect to Cookware)	-	130	-
4.5 of IS 13395(Attachment to Cookware)	-	130	-
5.2 of IS 13395(Bending Strength)	-	130	-
5.3 of IS 13395(Torque Strength)	-	130	-
5.4 of IS 13395(Impact Strength)	-	130	-
5.5 of IS 13395(Fatigue Resistance 15 000 cycles withstand)	-	130	-
5.6 of IS 13395(Leakage)	-	130	-
5.7 of IS 13395(Thermal Insulation)	-	130	-
5.8 of IS 13395(Heat Resistance)	-	130	-
5.9 of IS 13395(Washing Resistance)	-	130	-
5.10 of IS 13395(Burning Resistance)	-	130	-
5.5(Material comes in contact with food)	-	130	-
6.1(Staining Test)	-	130	-
6.2(Mechanical Shock Test)	-	130	-
6.3(Thermal Shock Test)	-	130	-
6.4(Dry Heat Test)	-	130	-
6.6(Heat test)	-	130	-
6.7.1(Nominal Capacity Test)	-	130	-
6.7.2(Internal diameter of utensil)	-	130	-
Cl 5.8(Coating adhesion test)	-	130	-
Cl 4.3(Classification)	-	130	-
4.3 of IS 13395(Selection and Size)	-	130	-
4.3(Classifications)	-	130	-
4.3(Core Thickness for 3-ply Construction (asper IS15960))	-	130	-
4.3(Thickness of protective layer (as per IS 15960))	-	130	-

-
Included w.e.f. 03.03.2025

6245

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18508 (2024)

Chipboard Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18508

19695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	695	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	16530	-
Clause. 5.0(Surface Coating)	-	460	-
Clause.6.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
CClause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause.6.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
CClause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.03.03.2025

6246

CIPET, KOCHI

6137634

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

39633 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	500	25% discount on test charges
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	Included in test charge for timber
Cl-6.1(Manufacture)	-	0	Included in test charge for timber
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	Included in test charge for timber
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	Included in test charge for timber
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	Included in test charge for timber
Cl-6.5(Manufacture (Scarf joints))	-	0	Included in test charge for timber
Cl-6.6(Manufacture ( Preservative treatment))	-	0	Included in test charge for timber
Cl-7.1(Dimensions -length)	-	375	25% discount on test charges
Cl-7.2(Thickness)	-	187.5	25% discount on test charges
Cl-7.3(Squareness)	-	375	25% discount on test charges
Cl-8.1, 8.2(Workmanship and finish)	-	0	Included in test charge for timber
Cl-10.3(Moisture Content)	-	675	25% discount on test charges
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	25% discount on test charges
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1800	specimen preparation charges
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1325	25% discount on test charges and specimen preparation charges
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	specimen preparation charges
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	specimen preparation charges
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	25% discount on test charges
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	25% discount on test charges
Cl-10.8(Tensile Strength)	-	2650	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	2150	25% discount on test charges and specimen preparation charges
Cl-10.11(Retention of Preservative)	-	2750	25% discount on test charges and specimen preparation charges
Cl-10.12(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-5.1(Timber)	-	500	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	0	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	375	-
Cl-7.2(Thickness)	-	187.5	-
Cl-7.3(Squareness)	-	375	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	675	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1325	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	187.5	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	187.5	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1800	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1800	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1800	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	5262.5	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	187.5	-
Cl-10.8(Tensile Strength)	-	2650	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	2150	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	2150	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	2150	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	2150	-
Cl-10.11(Retention of Preservative)	-	2750	-
Cl-10.12(Formaldehyde Content Test)	-	2250	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	3750	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

6247

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18507 (2024)

Drywall Screws ï¿½ Specification

All Grade / Type / Size / Designation as per IS 18507: 2024

19580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	580	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	15990	-
Clause. 5.0(Surface Coating)	-	1000	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	350	-
Clause.7.0(Hardness)	-	460	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-
Clause. 4.0(Dimenssions.)	-	0	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	0	-
Clause. 5.0(Cross Recess)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Surface Condition)	-	0	-
Clause. 5.0(Surface Coating)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Torque Testing)	-	0	-
Clause.7.0(Hardness)	-	0	-
Clause.8.0(Designation)	-	0	-
Clause.9.0(Marking)	-	0	-

17 Feb, 2028

-
-

6248

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

48860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	450	-
5.2 Table 1(Dimensions)	-	200	-
5.2 Table 1(Dimensions)	-	200	-
5.2 Table 1(Dimensions)	-	200	-
5.2 Table 1(Ends per dm)	-	150	-
5.2 Table 1(Picks per dm)	-	150	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	450	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	900	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	900	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	2500	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	650	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	550	-
4.3.1(Bottom Seam)	-	20330	-
4.3(Sacks)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	900	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	17280	-
4.2(Linear Density)	-	450	-
4.2(Width of tape)	-	200	-
Cl-4.4(Lamination Mass)	-	650	-
Cl-4.5(Liner- Thickness)	-	450	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	700	-
Cl-4.5(Liner- Width)	-	200	-
Cl-4.5(Liner- Visible defects)	-	400	-

-
Included w.e.f 04.03.2025

6249

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 7486 (2018)

Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision)

All Grade / Type / Size / Designation as per IS 7486: 2018

16680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1270	-
4, table 2(Material)	-	1200	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	14210	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
-

6250

CIPET, KOCHI

6137634

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

35105 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	1350	25% discount on test charges
Cl-4.2(Adhesive)	-	0	Included in test charges for timber
Cl-5.1(Veneers)	-	0	Included in test charges for timber
Cl-5.2.1(Glueing)	-	0	Included in test charges for timber
Cl -5.2.2(Thickness of Veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.1(Joint in Veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.2(Edge joints)	-	0	Included in test charges for timber
Cl - 5.2.3.4(Scarf joints)	-	0	Included in test charges for timber
Cl - 5.2.4(Grain Direction)	-	0	Included in test charges for timber
Cl-5.3(Treatment)	-	0	Included in test charges for timber
Cl-5.4(Moisture Content)	-	0	Included in test charges for timber
Cl-6.1(Dimensions (length))	-	375	25% discount on test charges
Cl-6.2(Thickness)	-	187.5	25% discount on test charges
Cl-6.3(Squareness)	-	375	25% discount on test charges
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	Included in test charges for timber
Cl-9.3(Moisture Content)	-	675	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	187.5	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1325	Specimen preparation charges included
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1325	Specimen preparation charges included
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	25 % discount on test charges
Cl-9.5.2(Water Resistance Test)	-	1800	Specimen preparation charges included
Cl-9.6(Tensile Strength-Along the grain)	-	2650	Tensile strength for both direction and specimen preparation charges included
Cl-9.7(Mycological Test -Adhesion)	-	5262.5	Total test charge for glue shear strength, adhesion of plies and mycological test.25% discount on test charges
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1325	25% discount on test charges and specimen preparation charges included
Cl-9.10(Retention of Preservative)	-	2750	25% discount on test charges
Cl-9.11(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9.4.2(Adhesion of Plies)	-	0	Included in test charges for timber
5.1.1(Defects in veneers)	-	0	Included in test charges for timber
Cl - 5.2.3.3(End joints)	-	0	Included in test charges for timber
Cl-4.1(Timber)	-	1350	-
Cl-4.2(Adhesive)	-	0	-
Cl-5.1(Veneers)	-	0	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	0	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	0	-
Cl-6.1(Dimensions (length))	-	375	-
Cl-6.2(Thickness)	-	187.5	-
Cl-6.3(Squareness)	-	375	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	0	-
Cl-9.3(Moisture Content)	-	675	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	187.5	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1325	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1325	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	187.5	-
Cl-9.5.2(Water Resistance Test)	-	1800	-
Cl-9.6(Tensile Strength-Along the grain)	-	2650	-
Cl-9.7(Mycological Test -Adhesion)	-	5262.5	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1325	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1325	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1325	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1325	-
Cl-9.10(Retention of Preservative)	-	2750	-
Cl-9.11(Formaldehyde Content Test)	-	2250	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9.4.2(Adhesion of Plies)	-	0	-
5.1.1(Defects in veneers)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

6251

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 17980 (2022)

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters (First Revision)

523000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (a)(Static MPPT efficiency)	-	249000		-
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	274000		-

-
Included w.e.f 07.04.2025

6252

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17731 (2021)

Agro-Textiles Laminated Woven Orchard Protection Covers Specification

102750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	450	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	450	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	900	-
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	90000	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	900	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	3000	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	900	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	650	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	650	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	2200	-
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	450	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	450	-
Clause No. 6.2(Joints/Seams)	-	200	-
Clause No. 6.3(Number and position of metal eyelets)	-	400	-
Clause No. 7.1(colour , texture and finish)	-	200	-
Cl-4.2("Fabric - tapes/dm in warp and weft directions and width of selvedge ")	-	500	-
Cl-6.4(Rope for Tying the Laminated Woven Orchard Protection Cover)	-	450	-

-
Included w.e.f 04.03.2025 Exclusion:Clause No. 7, Table 1, (ix) (Total visible light transmission, percent), Clause No. 7, Table 1, (x) (Light diffusion, percent), Clause No. 7, Table 1, (xi) (Thermicity IR effectiveness, percent)

6253

BIS, Central Laboratory (CL)

None

IS 1159 (2023)

Baking Powder â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, Table 1, (I) (Description)	-
Cl. 3.3, Table 1, (I) (Moisture,Percentage by Mass)	-
Cl. 3.3, Table 1, (II) (Available Carbon di-oxide, percent by Mass)	-
Cl. 3.3, Table 1, (III) (Arsenic, mg/kg,)	-
Cl. 3.3, Table 1, (IV) (Lead, mg/kg)	-

-
500 gm x 3

6254

CIPET, KOCHI

6137634

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

22759 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	225	25% discount on test charges
Cl-5.2, Table- 1 (i)(Blister)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ii)(Checks)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iv)(Dote)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vi)(Joints)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xi)(Patches)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xii)(Splits)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	Included in classification by appearance
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	Included in classification by appearance
Cl-6.1(Timber)	-	0	Included in classification by appearance
Cl-6.2(Adhesive)	-	0	Included in classification by appearance
Cl-7.2.1(Thickness of veneers)	-	0	Included in classification by appearance
Cl-7.2.3(Grain Direction)	-	0	Included in classification by appearance
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	Included in classification by appearance
Cl-7.2.5.2(Splits)	-	0	Included in classification by appearance
Cl-7.2.5.3(Overlap)	-	0	Included in classification by appearance
Cl-8.1(Dimensions -length)	-	375	25% discount on test charges
Cl-8.2(Thickness of the plywood boards)	-	187.5	25% discount on test charges
Cl-8.3(Squareness)	-	375	25% discount on test charges
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.3.2(Mycological Test)	-	3750	25% discount on test charges
Cl-11.4(Moisture Content)	-	675	25% discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.6(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9(WORKMANSHIP AND FINISH)	-	0	Included in classification by appearance
Cl-7.2.4(Scarf Joints)	-	0	Included in classification by appearance
Cl-5.1(Classification by appearance)	-	225	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	375	-
Cl-8.2(Thickness of the plywood boards)	-	187.5	-
Cl-8.3(Squareness)	-	375	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	-
Cl-11.3.2(Mycological Test)	-	3750	-
Cl-11.4(Moisture Content)	-	375	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	-
Cl-11.6(Formaldehyde Content Test)	-	2250	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

6255

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 7485 : Part 2 (2018)

Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)

All Grade / Type / Size / Designation as per IS 7485-2

21670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1270	-
4, table 2(Material)	-	1200	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	19200	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
-

6256

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 7485 : Part 1 (2018)

Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)

All Grade / Type / Size / Designation as per IS 7485-1

13940 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1270	-
4, table 2(Material)	-	1200	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	11470	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
Included w.e.f 03.06.2025

6257

CENTRAL POWER RESEARCH INSTITUTE (CPRI), BHOPAL

8100924

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

2103920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2.2(Glow wire testing)	-	6300	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one type
8.1.4(Clearances and creepage distances)	-	1800	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5(Limits of operation of current sensing relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1.1(General tripping requirements of overload relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.1.2(Thermal memory test verification)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4.1(Limits of operation of under-current relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.2(Temperature-rise)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.3(Accessible parts)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.4(Ambient air temperature)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.5(Main circuit)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
8.2.2.6(Control circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.3(Dielectric properties)	-	54050	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹14970 SPN/DP ₹33010 TP ₹43530 FP ₹54050
8.2.3.2(Voltage limiting components between circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.3.1(Mechanical durability)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.3.2(Electrical durability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.4(Overload current withstand capability of contactors)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.5(Coil power consumption)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.6(Pole impedance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2(Operating limits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.1.2(Coil power consumption)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.1.3(Pole impedance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.2.2(Relays and releases)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.2(Materials)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.2.1(General materials requirements)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.3(Current-carrying parts and their connections)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.1(Insulation)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.2(Direction of movement)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.4(Protection)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.5.3(Mounting)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8(Terminals)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8.1(General)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.8.2(Terminal identification and marking)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.10(Provisions for protective earthing)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11(Enclosures for equipment)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11.1(Design)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.11.2(Insulation)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.12(Degrees of protection of enclosed equipment)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2(Performance requirements)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1(Operating conditions)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.1.1.1(General conditions)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890
8.2.5.1(Performance under short-circuit conditions)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770
9.3.3.3.1(Ambient air temperature)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.2(Measurement of the temperature of parts)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.3(Temperature-rise of a part)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.4(Temperature-rise of the main circuit)	-	70270	Charges for one rating upto 200A ₹19450 201A to 1000A ₹26810/- 1001A to 2000A ₹36110 2001A to 3000A ₹46230/- 3001A to 4000A ₹58270/- 4001A to 5000A ₹70270/- per rating without GST
9.3.3.3.5(Temperature-rise of control circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.3.6(Operational performance capability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.4.2.2(prospective current)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
9.3.5(Overload current withstand capability of contactors)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.6.2(Operation and operating limits)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
9.3.6.3(Dielectric tests)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
9.3.6.4(Mechanical operation tests of a MPSD)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
F.7.2(Tests on products in a new condition)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
F.7.3(Test after conventional operational performance)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	11500	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
M.9.11(Clearance and creepage distances)	-	1800	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
P.2.3(Verification of operational performance capability)	-	27000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one sample of one rating
P.2.4.2(Test voltage)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
P.2.4.3(Application of the test voltage)	-	14000	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating SP ₹3000 SPN/DP ₹8000 TP ₹11000 FP ₹14000
P.4(Test of MPSD for IT system)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
Q.5.3(Selectivity determined by test)	-	101010	Estimated tests charges do not include GST. Final charges will include GST at the prevailing rates. Charges for one rating without GST SP, SPN/DP & TPN upto 10kA ₹40890 FP upto 10kA is ₹81770 SP, SPN/DP & TPN 10kA to 50kA ₹50550
8.1.2.2(Glow wire testing)	-	-	-
8.1.4(Clearances and creepage distances)	-	-	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	-	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	-	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	-	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	-	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	-	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	-	-
8.2.1.5.1.2(Thermal memory test verification)	-	-	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	-	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	-	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	-	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	-	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	-	-
8.2.2(Temperature-rise)	-	-	-
8.2.2.3(Accessible parts)	-	-	-
8.2.2.4(Ambient air temperature)	-	-	-
8.2.2.5(Main circuit)	-	-	-
8.2.2.6(Control circuits)	-	-	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	-	-
8.2.3(Dielectric properties)	-	-	-
8.2.3.2(Voltage limiting components between circuits)	-	-	-
8.2.4.3.1(Mechanical durability)	-	-	-
8.2.4.3.2(Electrical durability)	-	-	-
8.2.4.4(Overload current withstand capability of contactors)	-	-	-
8.2.4.5(Coil power consumption)	-	-	-
8.2.4.6(Pole impedance)	-	-	-
9.3.3.2(Operating limits)	-	-	-
9.3.3.2.1.2(Coil power consumption)	-	-	-
9.3.3.2.1.3(Pole impedance)	-	-	-
9.3.3.2.2(Relays and releases)	-	-	-
8.1.2(Materials)	-	-	-
8.1.2.1(General materials requirements)	-	-	-
8.1.3(Current-carrying parts and their connections)	-	-	-
8.1.5.1(Insulation)	-	-	-
8.1.5.2(Direction of movement)	-	-	-
8.1.5.4(Protection)	-	-	-
8.1.5.3(Mounting)	-	-	-
8.1.8(Terminals)	-	-	-
8.1.8.1(General)	-	-	-
8.1.8.2(Terminal identification and marking)	-	-	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	-	-
8.1.10(Provisions for protective earthing)	-	-	-
8.1.11(Enclosures for equipment)	-	-	-
8.1.11.1(Design)	-	-	-
8.1.11.2(Insulation)	-	-	-
8.1.12(Degrees of protection of enclosed equipment)	-	-	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	-	-
8.2(Performance requirements)	-	-	-
8.2.1(Operating conditions)	-	-	-
8.2.1.1.1(General conditions)	-	-	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	-	-
8.2.5.1(Performance under short-circuit conditions)	-	-	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	-	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	-	-
9.3.3.3.1(Ambient air temperature)	-	-	-
9.3.3.3.2(Measurement of the temperature of parts)	-	-	-
9.3.3.3.3(Temperature-rise of a part)	-	-	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	-	-
9.3.3.3.5(Temperature-rise of control circuits)	-	-	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	-	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	-	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	-	-
9.3.3.6(Operational performance capability)	-	-	-
9.3.4.2.2(prospective current)	-	-	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	-	-
9.3.5(Overload current withstand capability of contactors)	-	-	-
9.3.6.2(Operation and operating limits)	-	-	-
9.3.6.3(Dielectric tests)	-	-	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	-	-
F.7.2(Tests on products in a new condition)	-	-	-
F.7.3(Test after conventional operational performance)	-	-	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	-	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	-	-
M.9.11(Clearance and creepage distances)	-	-	-
P.2.3(Verification of operational performance capability)	-	-	-
P.2.4.2(Test voltage)	-	-	-
P.2.4.3(Application of the test voltage)	-	-	-
P.4(Test of MPSD for IT system)	-	-	-
Q.5.3(Selectivity determined by test)	-	-	-

30 Jun, 2027

-
Exclusions: 8.1.2.3 (Test based on flammability category), 8.1.14 (Limited energy source), 8.1.14.1 (General), 8.1.14.2 (Limited energy source with galvanic separation), 8.1.14.3 (Limited energy source with current limiting impedance), 8.1.15 (Stored charge energy circuit), 8.1.16 (Fault and abnormal conditions), 8.1.17 (Short-circuit and overload protection of ports), 8.3 (Electromagnetic compatibility (EMC)), 8.3.2 (Immunity), 8.3.3 (Emission), 9.1.5.2 (Environment tests), 9.2.2 (Electrical performance of screwless-type clamping units), 9.2.3 (Ageing test for screwless-type clamping unit), 9.2.4 (Limited energy source test), 9.2.5 (Breakdown of components), 9.2.5.2 (Breakdown of components test), 9.4.2 (Immunity), 9.4.2.2 (Electrostatic discharge), 9.4.2.3 (Radiated radio-frequency electromagnetic field), 9.4.2.4 (Conducted disturbances induced by radio-frequency fields), 9.4.2.5 (Electrical fast transient/bursts), 9.4.2.6 (Surges), 9.4.2.7 (Power frequency magnetic field), 9.4.2.8 (Voltage dips and short-time interruptions), 9.4.2.9 (Harmonics in the supply), 9.4.3 (Emission), H.3 (Limits of operation of control functions), H.4 (Test of the control functions), M.8.3 (Electromagnetic compatibility (EMC)), M.9.4 (Thermal cycling test), M.9.5 (Climatic test), M.9.7 (Critical load current test), N.3.2 (Touch current measurement)

6258

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 7483 (2018)

Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision)

All Grade / Type / Size / Designation as per IS 7483

19670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1200	-
4, table 2(Material)	-	1200	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	17270	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-
3(Dimensions)	-	0	-
4, table 2(Material)	-	0	-
4, table 2(General requirements)	-	0	-
4, table 2(Thread)	-	0	-
4, table 2(Mechanical property)	-	0	-
4, table 2(Tolerances)	-	0	-
4, table 2(Cross recess)	-	0	-
4, table 2(Finish - coating)	-	0	-
4, table 2(Surface integrity)	-	0	-
4, table 2(Acceptability)	-	0	-
5(Designation)	-	0	-

17 Feb, 2028

-
Included w.e.f 03.06.2025

6259

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1084 (2005)

Textiles – Manila ropes – Specification (fifth revision)

Grade 1 & Grade 2

33500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.5(Lubrication Weighing or loading materials shall not be used. For the purpose of dressing the fibre or for the preservation of the rope, a lubricant shall be added preferably petroleum products. The quantity of dressing applied to the fibre shall be neither less than 10 percent nor more than 15 percent calculated on the mass of the finished rope when determined by extraction with petroleum ether or other solvent.)	-	2500	-
6.4.1(The angle of lay for all types of ropes shall be 37°)	-	2500	-
4(GRADING )	-	0	NA
6(MANUFACTURE)	-	0	NA
6.1 Table 1 to 3(Manila Fibre )	-	1000	-
6.2 Table 1 to 3(Yarn )	-	1500	-
6.3(Strand )	-	1500	-
6.4(Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-	0	Testing charges already mentioned above at Cl. no. 6.4 The angle of lay i.e. Rs. 2500/-
6.6 IS 3522 (Part 1)(Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-	8000	-
8(REQUIREMENTS)	-	0	-
8.2 IS 7071 (Parts 1 to 3)(Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-	2000	-
8.4(Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-	1500	-
8.5 Table: 1 / 2 / 3(No. of yarns per strand)	-	4000	-
8.5 Table: 1 / 2 / 3(Linear density)	-	2000	-
8.5 Table: 1 / 2 / 3(Breaking strength Grade :)	-	4000	-
9(FINISH)	-	1000	-
10,10.1 IS 9560(IDENTIFICATION )	-	2000	-
10.1.1(IDENTIFICATION )	-	0	Testing charges already mentioned above
11 IS 3256(PACKING .)	-	0	NA
6.5(Lubrication Weighing or loading materials shall not be used. For the purpose of dressing the fibre or for the preservation of the rope, a lubricant shall be added preferably petroleum products. The quantity of dressing applied to the fibre shall be neither less than 10 percent nor more than 15 percent calculated on the mass of the finished rope when determined by extraction with petroleum ether or other solvent.)	-	0	Testing charges already mentioned above
6.4.1(The angle of lay for all types of ropes shall be 37°)	-	0	Testing charges already mentioned above
4(GRADING )	-	0	NA
6(MANUFACTURE)	-	0	Testing charges already mentioned above
6.1 Table 1 to 3(Manila Fibre )	-	0	Testing charges already mentioned above
6.2 Table 1 to 3(Yarn )	-	0	Testing charges already mentioned above
6.3(Strand )	-	0	Testing charges already mentioned above
6.4(Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-	0	Testing charges already mentioned above
6.6 IS 3522 (Part 1)(Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-	0	Testing charges already mentioned above
8(REQUIREMENTS)	-	0	NA
8.1 IS 7071 (Part 2)(Mass of the Coil The net mass of the coil shall be determined in accordance with IS 7071 (Part 2). The difference between the observed mass and the calculated value of mass obtained by multiplying nominal linear density of the rope with the length of rope in the coil shall be within limits specified below: Reference No. of Rope)	-	0	NA
8.2 IS 7071 (Parts 1 to 3)(Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-	0	Testing charges already mentioned above
8.3 IS 7071 (Parts 1 to 3)(Length of Coil The length of each coil when tested as per IS 7071 (Parts 1 to 3) shall not be less than 220 m or as declared. However, if so agreed between the buyer and the seller, the length of coil may be tested under zero tension and ± 5 percent tolerance shall be applicable for the rope with diameters less than or equal to 14 and ± 3 percent with a diameter greater than 14 on the specified/declared length.)	-	0	NA
8.4(Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(No. of yarns per strand)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(Linear density)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(Breaking strength Grade :)	-	0	Testing charges already mentioned above
9(FINISH)	-	0	Testing charges already mentioned above
10,10.1 IS 9560(IDENTIFICATION )	-	0	Testing charges already mentioned above
10.1.1(IDENTIFICATION )	-	0	Testing charges already mentioned above
11 IS 3256(PACKING .)	-	0	NA
6.5(Lubrication Weighing or loading materials shall not be used. For the purpose of dressing the fibre or for the preservation of the rope, a lubricant shall be added preferably petroleum products. The quantity of dressing applied to the fibre shall be neither less than 10 percent nor more than 15 percent calculated on the mass of the finished rope when determined by extraction with petroleum ether or other solvent.)	-	0	Testing charges already mentioned above
6.4.1(The angle of lay for all types of ropes shall be 37°)	-	0	Testing charges already mentioned above
4(GRADING )	-	0	NA
6(MANUFACTURE)	-	0	NA
6.1 Table 1 to 3(Manila Fibre )	-	0	Testing charges already mentioned above
6.2 Table 1 to 3(Yarn )	-	0	Testing charges already mentioned above
6.3(Strand )	-	0	Testing charges already mentioned above
6.4(Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-	0	Testing charges already mentioned above
6.6 IS 3522 (Part 1)(Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-	0	Testing charges already mentioned above
8(REQUIREMENTS)	-	0	NA
8.1 IS 7071 (Part 2)(Mass of the Coil The net mass of the coil shall be determined in accordance with IS 7071 (Part 2). The difference between the observed mass and the calculated value of mass obtained by multiplying nominal linear density of the rope with the length of rope in the coil shall be within limits specified below: Reference No. of Rope)	-	0	NA
8.2 IS 7071 (Parts 1 to 3)(Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-	0	Testing charges already mentioned above
8.3 IS 7071 (Parts 1 to 3)(Length of Coil The length of each coil when tested as per IS 7071 (Parts 1 to 3) shall not be less than 220 m or as declared. However, if so agreed between the buyer and the seller, the length of coil may be tested under zero tension and ± 5 percent tolerance shall be applicable for the rope with diameters less than or equal to 14 and ± 3 percent with a diameter greater than 14 on the specified/declared length.)	-	0	NA
8.4(Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(No. of yarns per strand)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(Linear density)	-	0	Testing charges already mentioned above
8.5 Table: 1 / 2 / 3(Breaking strength Grade :)	-	0	NA
9(FINISH)	-	0	Testing charges already mentioned above
10,10.1 IS 9560(IDENTIFICATION )	-	0	Testing charges already mentioned above
10.1.1(IDENTIFICATION )	-	0	Testing charges already mentioned above
11 IS 3256(PACKING .)	-	0	NA
Cl.6.5(Lubrication)	-	0	Testing charges already mentioned above
Cl.6.6(a)(Rot-Proofing Treatment(Zinc))	-	0	Testing charges already mentioned above
Cl.6.6(b)(Rot-Proofing Treatment(Copper))	-	0	Testing charges already mentioned above
6.1(Manila Fiber)	-	0	Testing charges already mentioned above
6.2(Yarn)	-	0	Testing charges already mentioned above
6.3(Strand)	-	0	Testing charges already mentioned above
6.4(Ropes)	-	0	Testing charges already mentioned above
6.5(Lubrication)	-	0	Testing charges already mentioned above
6.6(Rot proofing Treatment)	-	0	Testing charges already mentioned above
8.1(Mass of the Coil)	-	0	NA
8.2(Pitch)	-	0	Testing charges already mentioned above
8.3(Length of Coil)	-	0	NA
8.4(Diameter)	-	0	Testing charges already mentioned above
8.5-Table 1-(i)(Diameter)	-	0	Testing charges already mentioned above
8.5-Table 1-(ii)(No of Yarns per Strand)	-	0	Testing charges already mentioned above
8.5-Table 1-(iii)(Linear Density)	-	0	Testing charges already mentioned above
8.5-Table 1-(iv)("Tensile Force to be Applied for the Measurement of Liner Density N")	-	0	Testing charges already mentioned above
8.5-Table 1-(v)(Breaking Strength Min)	-	0	NA
8.5-Table 1-(v)(Breaking Strength Min)	-	0	NA
11(Packing)	-	0	NA
12(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f.24.02.2025 Exclusion For construction water and compressive strength test only.

6260

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18476 (2023)

Fasteners ï¿½ Hexagon Washer Head Drilling Screws with Tapping Screw Thread

All Grade / Type / Size / Designation as per IS 18476

17225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	1385	-
Clause. 4.0(Thread size.)	-	0	-
Clause. 4.0(Length)	-	0	-
Clause. 5.0(Material)	-	1200	-
Clause. 5.0(Thread)	-	0	-
Clause. 5.0(Tolerances)	-	0	-
Clause. 5.0(Mechnical and functional properties.)	-	14640	-
Clause. 5.0(Finish)	-	0	-
Clause. 5.0(Acceptability)	-	0	-
Clause.6.0(Designation)	-	0	-
Clause.6.0(Marking)	-	0	-

17 Feb, 2028

-
-

6261

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18471 : Part 3 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head

All Grade / Type / Size / Designation as per IS 18471 (Part-III)

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	810	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Tolerances)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	15640	-
Clause. 4.0(Finish)	-	0	-
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
-

6262

FARE Labs Pvt. Ltd., Gurugram

8135716

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

31100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.7,Table 3, Sl No i)(Lead)	-	300	-
Clause 3.7,Table 3 ,Sl No ii)(Arsenic)	-	300	-
3.7, Table 3 (ii)(Arsenic - IS 11124)	-	0	-
3.7, Table 3 (i)(Lead -IS 12074)	-	0	-
Clause 3.7,Table 3,Sl No iii)(Aflaoxin)	-	1000	-
Clause 3.7,Table 3, Sl No iv)(Melamine)	-	1000	-
3.6(Pesticide residue)	-	100	-
4.8(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	100	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Pesticide Residues)	-	0	-
3.6(2,4-Dichlorophenoxy Acetic acid)	-	100	-
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	100	-
3.6(Acetamiprid)	-	100	-
3.6(Azoxystrobin)	-	100	-
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	100	-
3.6(Bifenthrin)	-	100	-
3.6(Bitertanol)	-	100	-
3.6(Buprofezin)	-	100	-
3.6(Carbaryl)	-	100	-
3.6(Carbendazim)	-	100	-
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	100	-
3.6(Chlorantraniliprole)	-	100	-
3.6(Chlorothalonil)	-	100	-
3.6(Chlorpyriphos)	-	100	-
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	100	-
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	100	-
3.6(Deltamethrin (Decamethrin))	-	100	-
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	100	-
3.6(Difenoconazole)	-	100	-
3.6(Dimethoate)	-	100	-
3.6(Dinotefuron)	-	100	-
3.6(Mancozeb)	-	100	-
3.6(metiram as CS2)	-	100	-
3.6(Edifenphos)	-	100	-
3.6(Emamectin Benzoate)	-	100	-
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	100	-
3.6(Ethofenprox (Etofenprox))	-	100	-
3.6(Fenpropathrin)	-	100	-
3.6(Fenvalerate (fat soluble residue))	-	100	-
3.6(Fipronil)	-	100	-
3.6(Flubendiamide)	-	100	-
3.6(Flusilazole)	-	100	-
3.6(Glufosinate Ammonium)	-	100	-
3.6(Imidacloprid)	-	100	-
3.6(Indoxacarb)	-	100	-
3.6(Kresoxim Methyl)	-	100	-
3.6(Methomyl)	-	100	-
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Metolachlor)	-	100	-
3.6(Monocrotophos)	-	100	-
3.6(Oxydemeton-Methyl)	-	100	-
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	100	-
3.6(Penconazole)	-	100	-
3.6(Phenthoate)	-	100	-
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	100	-
3.6(Pirimiphos-methyl)	-	100	-
3.6(Propiconazole)	-	100	-
3.6(Pyraclostrobin)	-	100	-
3.6(Tebuconazole)	-	100	-
3.6(Thiacloprid)	-	100	-
3.6(Thiophanate-Methyl)	-	100	-
3.6(Thiamethoxam)	-	100	-
3.6(Triacontanol)	-	100	-
3.6(Triadimefon)	-	100	-
3.6(Trichlorfon)	-	100	-
3.6("Antibiotic and Veterinary drug residues ")	-	100	-
3.6(Ampicillin)	-	450	-
3.6(Apramycin)	-	450	-
3.6(Albendazole)	-	450	-
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	450	-
3.6(Ceftiofur)	-	450	-
3.6(Cefphactril)	-	450	-
3.6(Doramectin)	-	450	-
3.6(Diminazene)	-	450	-
3.6(Flunixin)	-	450	-
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	450	-
3.6(Ivermectin)	-	450	-
3.6(Lincomycin)	-	450	-
3.6(Monensin)	-	450	-
3.6(Meloxicam)	-	450	-
3.6(Neomycin)	-	450	-
3.6(Oxyclozanide)	-	450	-
3.6(Parbendazole)	-	450	-
3.6(Praziquantel)	-	450	-
3.6(Spectinomycin)	-	450	-
3.6(Sulfadiazine)	-	450	-
3.6(Sulfanilamide)	-	450	-
3.6(Sulfaquinoxaline)	-	4500	-
3.6(Sulfadimidine)	-	450	-
3.6(Sulfa Chloropyrazine)	-	450	-
3.6(Thiabendazole)	-	450	-
3.6(Trimethoprim)	-	450	-
3.6(Tylosin)	-	450	-
3.6(Virginiamycin)	-	450	-
3.7, Table 3 (iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	0	-
3.7, Table 3 (iv)(Melamine - IS 16195)	-	0	-
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	300	-
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	300	-
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	300	-
Clause 3.5,Table 1 ,Sl No iv)(Milk protein in milk solids not fat)	-	300	-
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	300	-
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	300	-
Clause 3.5,Table 1 ,Sl No vii)(Titratable acidity (lactic acid),)	-	300	-
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	300	-
3.5, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (ii)(Total solids -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (iii)(Milk Fat -IS 11721/IS 1224(P-2))	-	0	-
3.5, Table 1 (iv)(Milk protein in milk solids not fat-IS 11917)	-	0	-
3.5, Table 1 (v)(Insolubility index - IS 12759)	-	0	-
3.5, Table 1 (vi)(Total ash (on dry basis) - IS1165)	-	0	-
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	0	-
3.5, Table 1 (viii)(Scorched Particles - IS 13500)	-	0	-
3.2(Flavour and Taste)	-	300	-
3.3(extraneous matter)	-	1000	-
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	500	-
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	500	-
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	500	-
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	500	-
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	500	-
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	700	-
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	500	-
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	500	-
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	500	-
"3.5 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1):2021)	-	0	-
"3.5 Table 2 (ii) "(Coliform count-IS 5401 (Part 1):2012)	-	0	-
"3.5 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 8/Sec-1))	-	0	-
"3.5 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	-
"3.5 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3/ Section -1))	-	0	-
"3.5 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	-
"3.5 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	-
"3.5 Table 2 (viii) "(Sulphite reducing clostridia-ISO 15213)	-	0	-
"3.5 Table 2 (ix) "(Escherichia coli-IS 5887 (Part 1))	-	0	-
CL 3.4, Table 2 (i)(Aerobic Plate Count)	-	0	-
CL 3.4, Table 2 (ii)(Coliform Count)	-	0	-
CL 3.4, Table 2 (iii)(Staphylococcus aureus (Coagulase positive))	-	0	-
CL 3.4, Table 2 (iv)(Yeast and Mold Count)	-	0	-
CL 3.4, Table 2 (v)(Salmonella sp)	-	0	-
CL 3.4, Table 2 (vi)(Listeria monocytogenes)	-	0	-
CL 3.4, Table 2 (vii)(Bacillus cereus)	-	0	-
CL 3.4, Table 2 (ix)(E. coli)	-	0	-
3.1(Discription)	-	600	-
4(Packing)	-	600	-
5(Marking)	-	600	-
3.2(Flavour & Taste - IS 1165)	-	0	-
3.3(Free from lumps ,extraneous matter,vetetable oil/fat,mineral oil, thickening agents, added flavour and sweetening agent - IS 1165)	-	0	-
CL 3.4, Table 2 (viii)(Sulphite reducing clostridia)	-	0	-
Clause 3.7,Table 3, Sl No i)(Lead)	-	0	-
Clause 3.7,Table 3 ,Sl No ii)(Arsenic)	-	0	-
3.7, Table 3 (ii)(Arsenic - IS 11124)	-	0	-
3.7, Table 3 (i)(Lead -IS 12074)	-	0	-
Clause 3.7,Table 3,Sl No iii)(Aflaoxin)	-	0	-
Clause 3.7,Table 3, Sl No iv)(Melamine)	-	0	-
3.6(Pesticide residue)	-	0	-
4.8(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Pesticide Residues)	-	0	-
3.6(2,4-Dichlorophenoxy Acetic acid)	-	0	-
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	0	-
3.6(Acetamiprid)	-	0	-
3.6(Azoxystrobin)	-	0	-
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	0	-
3.6(Bifenthrin)	-	0	-
3.6(Bitertanol)	-	0	-
3.6(Buprofezin)	-	0	-
3.6(Carbaryl)	-	0	-
3.6(Carbendazim)	-	0	-
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	0	-
3.6(Chlorantraniliprole)	-	0	-
3.6(Chlorothalonil)	-	0	-
3.6(Chlorpyriphos)	-	0	-
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	0	-
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	0	-
3.6(Deltamethrin (Decamethrin))	-	0	-
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	0	-
3.6(Difenoconazole)	-	0	-
3.6(Dimethoate)	-	0	-
3.6(Dinotefuron)	-	0	-
3.6(Mancozeb)	-	0	-
3.6(metiram as CS2)	-	0	-
3.6(Edifenphos)	-	0	-
3.6(Emamectin Benzoate)	-	0	-
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	0	-
3.6(Ethofenprox (Etofenprox))	-	0	-
3.6(Fenpropathrin)	-	0	-
3.6(Fenvalerate (fat soluble residue))	-	0	-
3.6(Fipronil)	-	0	-
3.6(Flubendiamide)	-	0	-
3.6(Flusilazole)	-	0	-
3.6(Glufosinate Ammonium)	-	0	-
3.6(Imidacloprid)	-	0	-
3.6(Indoxacarb)	-	0	-
3.6(Kresoxim Methyl)	-	0	-
3.6(Methomyl)	-	0	-
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	0	-
3.6(Metolachlor)	-	0	-
3.6(Monocrotophos)	-	0	-
3.6(Oxydemeton-Methyl)	-	0	-
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	0	-
3.6(Penconazole)	-	0	-
3.6(Phenthoate)	-	0	-
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	0	-
3.6(Pirimiphos-methyl)	-	0	-
3.6(Propiconazole)	-	0	-
3.6(Pyraclostrobin)	-	0	-
3.6(Tebuconazole)	-	0	-
3.6(Thiacloprid)	-	0	-
3.6(Thiophanate-Methyl)	-	0	-
3.6(Thiamethoxam)	-	0	-
3.6(Triacontanol)	-	0	-
3.6(Triadimefon)	-	0	-
3.6(Trichlorfon)	-	0	-
3.6("Antibiotic and Veterinary drug residues ")	-	0	-
3.6(Ampicillin)	-	0	-
3.6(Apramycin)	-	0	-
3.6(Albendazole)	-	0	-
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	0	-
3.6(Ceftiofur)	-	0	-
3.6(Cefphactril)	-	0	-
3.6(Doramectin)	-	0	-
3.6(Diminazene)	-	0	-
3.6(Flunixin)	-	0	-
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	0	-
3.6(Ivermectin)	-	0	-
3.6(Lincomycin)	-	0	-
3.6(Monensin)	-	0	-
3.6(Meloxicam)	-	0	-
3.6(Neomycin)	-	0	-
3.6(Oxyclozanide)	-	0	-
3.6(Parbendazole)	-	0	-
3.6(Praziquantel)	-	0	-
3.6(Spectinomycin)	-	0	-
3.6(Sulfadiazine)	-	0	-
3.6(Sulfanilamide)	-	0	-
3.6(Sulfaquinoxaline)	-	0	-
3.6(Sulfadimidine)	-	0	-
3.6(Sulfa Chloropyrazine)	-	0	-
3.6(Thiabendazole)	-	0	-
3.6(Trimethoprim)	-	0	-
3.6(Tylosin)	-	0	-
3.6(Virginiamycin)	-	0	-
3.7, Table 3 (iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	0	-
3.7, Table 3 (iv)(Melamine - IS 16195)	-	0	-
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	0	-
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	0	-
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	0	-
Clause 3.5,Table 1 ,Sl No iv)(Milk protein in milk solids not fat)	-	0	-
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	0	-
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	0	-
Clause 3.5,Table 1 ,Sl No vii)(Titratable acidity (lactic acid),)	-	0	-
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	0	-
3.5, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (ii)(Total solids -IS 16072/IS 11623)	-	0	-
3.5, Table 1 (iii)(Milk Fat -IS 11721/IS 1224(P-2))	-	0	-
3.5, Table 1 (iv)(Milk protein in milk solids not fat-IS 11917)	-	0	-
3.5, Table 1 (v)(Insolubility index - IS 12759)	-	0	-
3.5, Table 1 (vi)(Total ash (on dry basis) - IS1165)	-	0	-
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	0	-
3.5, Table 1 (viii)(Scorched Particles - IS 13500)	-	0	-
3.2(Flavour and Taste)	-	0	-
3.3(extraneous matter)	-	0	-
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	0	-
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	0	-
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	0	-
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	-
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	0	-
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	0	-
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	-
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	-
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	0	-
"3.5 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1):2021)	-	0	-
"3.5 Table 2 (ii) "(Coliform count-IS 5401 (Part 1):2012)	-	0	-
"3.5 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 8/Sec-1))	-	0	-
"3.5 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	-
"3.5 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3/ Section -1))	-	0	-
"3.5 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	-
"3.5 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	-
"3.5 Table 2 (viii) "(Sulphite reducing clostridia-ISO 15213)	-	0	-
"3.5 Table 2 (ix) "(Escherichia coli-IS 5887 (Part 1))	-	0	-
CL 3.4, Table 2 (i)(Aerobic Plate Count)	-	0	-
CL 3.4, Table 2 (ii)(Coliform Count)	-	0	-
CL 3.4, Table 2 (iii)(Staphylococcus aureus (Coagulase positive))	-	0	-
CL 3.4, Table 2 (iv)(Yeast and Mold Count)	-	0	-
CL 3.4, Table 2 (v)(Salmonella sp)	-	0	-
CL 3.4, Table 2 (vi)(Listeria monocytogenes)	-	0	-
CL 3.4, Table 2 (vii)(Bacillus cereus)	-	0	-
CL 3.4, Table 2 (ix)(E. coli)	-	0	-
3.1(Discription)	-	0	-
4(Packing)	-	0	-
5(Marking)	-	0	-
3.2(Flavour & Taste - IS 1165)	-	0	-
3.3(Free from lumps ,extraneous matter,vetetable oil/fat,mineral oil, thickening agents, added flavour and sweetening agent - IS 1165)	-	0	-
CL 3.4, Table 2 (viii)(Sulphite reducing clostridia)	-	0	-

09 Mar, 2029

-
Included w.e.f.19.05.2025

6263

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

17050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	2150	Blend Analysis: 950 Dimension of bedsheet & pillow cover: 800 Visual Observations X 2: 400
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	350	INR 350 is the price for each washing & drying cycle
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	300	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	500	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	400	-
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	1650	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	250	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	700	-
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	650	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	900	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	800	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	800	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	350	-
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	450	-
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	6800	-

-
Included w.e.f 04.03.2025 Exclusion: 7.1- Table 2- vi) (PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2)), 7.1- Table 2- vii) (PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)]), 7.1- Table 2- viii) (PERFORMANCE REQUIREMENTS - Biocompatibility Evaluation a) Cytotoxicity b) Irritation and skin sensitization)

6264

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 18471 : Part 2 (2023)

Fasteners ï¿½ Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head

All grade/ Type/ Size as per IS 18471 (Part-II): 2023

17650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimenssions.)	-	810	-
Clause. 3.0(Thread size.)	-	0	-
Clause. 3.0(Length)	-	0	-
Clause. 4.0(Material)	-	1200	-
Clause. 4.0(Thread)	-	0	-
Clause. 4.0(Cross recesses)	-	0	-
Clause. 4.0(Mechnical and functional properties.)	-	15640	-
Clause. 4.0(Finish)	-	0	0
Clause. 4.0(Acceptability)	-	0	-
Clause.5.0(Designation)	-	0	-
Clause.5.0(Marking)	-	0	-

17 Feb, 2028

-
-

6265

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
5(Marking )	-	0	-
3.3, 4.3(Material )	-	0	-
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	2000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	2000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
3, 4(Type of Flask)	-	0	-
3.1, 4.1(Series of Nominal Capacity)	-	0	-
3.2, 4.2(Nominal Capacity )	-	0	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	0	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	0	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	0	-
3.5.2(Neck Length)	-	0	-
3.5.3, 4.5.2(Dimensions of base )	-	0	-
3.5.4, 4.5.3(Wall thickness)	-	0	-

-
Included w.e.f 23.05.2025 Excluding Material Cl 3.3 & 4.3 Restricted to nominal capacity of 1000 milliletres

6266

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 17682 (2021)

ALUMINIUM COMPOSITE PANEL SPECIFICATION

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1(Polymer Granules)	-	5000	Rs. 42000/- for all test excluding Table 3 & 4 Clause 5.1 Melt flow Index - Rs.2500/- Ash content - Rs.2500/-
Clause 5.2(Aluminium Alloy Sheets)	-	1000	Clause 5.2 - Rs.500/- Clause 5.3 - Rs.500/-
Clause 5.4(Surface Coating)	-	500	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	3000	Clause 6.1 - Length - Rs.750/- Width - Rs.750/- Clause 6.2 Thickness - Rs.1500/- Table-1 Edge Straightness - Rs.1500/- Table-1 Squarenss - Rs.1500/-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	2000	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	1500	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	1500	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	1500	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	2500	-
"Clause 7.1 Table 3(i)"(Coating type)	-	2000	Coating type and Coating Thickness - Rs.2000/-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	7000	Dry - Rs.2000/- Wet - Rs.2000/- Boiling water - Rs.3000/-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	2000	-
"Clause 7.1 Table 3(v)"(Gloss)	-	2000	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	Amendment no.1,Sept.2024 Sl. no. (V) a).1 Humidity Test - Rs.200,000/- a).2 Corrosion Test-Rs.200,000/- b) Weathering test PVDF/FEVE(2 Coat) - Rs.400,000/- PVDF/FEVE(3 Coat)- Rs.400,000/- SDP(2/3 Coat)-Rs.300,000/- Polyester(1 Coat)-Rs.100,000/-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	7500	Amendment no.1,Sept.2024 a) 1500/- b) 1500/- c) 1500/- d) 1500/- e) 1500/-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	15000	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	15000	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	15000	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	115000	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	35000	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	15000	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6(DIMENSIONS AND TOLERANCE)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-
Clause 5.1(Polymer Granules)	-	0	-
Clause 5.2(Aluminium Alloy Sheets)	-	0	-
Clause 5.4(Surface Coating)	-	0	-
Clause 6.1(Normal dimensions)	-	0	-
"Clause 7.1 Table 2(i)"(Density of core, g/cm)	-	0	-
"Clause 7.1 Table 2(ii)"(Tensile strength,)	-	0	-
"Clause 7.1 Table 2(iii)"(Yield strength)	-	0	-
"Clause 7.1 Table 2(iv)"(Elongation)	-	0	-
"Clause 7.1 Table 2(v)"(Peel strength, N/10 mm width, Min)	-	0	-
"Clause 7.1 Table 3(i)"(Coating type)	-	0	-
"Clause 7.1 Table 3(ii)"(Coating thickness)	-	0	-
"Clause 7.1 Table 3(iii)"(Adhesion (cross hatch))	-	0	-
"Clause 7.1 Table 3(iv)"(Pencil hardness, Min)	-	0	-
"Clause 7.1 Table 3(v)"(Gloss)	-	0	-
"Clause 7.1 Table 3(vi)"(Weatherometer test (for 4 000 h))	-	0	-
"Clause 7.1 Table 3(vii)"(Chemical resistance)	-	0	-
"Clause 7.1 Table 4(i)"(Limiting oxygen index (LOI), Min)	-	0	-
"Clause 7.1 Table 4(ii)"(Smoke density rating, percent, Max)	-	0	-
"Clause 7.1 Table 4(iii)"(Ignitability)	-	0	-
"Clause 7.1 Table 4(iv)"(Flame spread)	-	0	-
"Clause 7.1 Table 4(v)"(Non-combustibility (see Note))	-	0	-
"Clause 7.1 Table 4(vi)"(Oxygen bomb calorimeter)	-	0	-
"Clause 7.2 Table 5(i)"(Sound transmission class (STC), dB, Min)	-	0	-
"Clause 7.2 Table 5(ii)"(Sound absorption coefficient, percent, Min)	-	0	-
"Clause 7.2 Table 5(iii)"(Coefficient of linear thermal expansion, °C–1 , Max)	-	0	-
"Clause 7.2 Table 5(iv)"(Thermal Conductivity (W/m2 K), Max)	-	0	-

25 Feb, 2027

-
-

6267

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

2061000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.2(Terminal identification and marking)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.3(Functional markings)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.4(Emergency stop)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5(Operating diagram)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5.1(Position indication)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.5.2(Terminal markings for operating diagrams)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.2.6(Time delay markings)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
5.3(Instructions for installation, operation and maintenance)	-	500	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.2.2(Glow-wire testing)	-	10000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.3(Current-carrying parts and their connections)	-	35000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.1.4(Clearances and creepage distances)	-	25000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.2.4.1(Making and breaking capacities)	-	80000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.2.4.3(Durability)	-	240000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.4(Electrostatic discharges)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	120000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.6(Electrical fast transients/bursts)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.7(Surges)	-	50000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.9(Power-frequency magnetic fields)	-	30000	375000(For sequence testings of 1 sample); 1226000(For Annex & Other testings of 1 sample); 460000 (For EMC tests per sample) Total cost 2061000 (Seq. tests + Annex tests + EMC tests)
7.3.2.10(Voltage dips and interruptions)	-	30000	-
7.3.3(Emission)	-	30000	-
7.2.3(Dielectric properties)	-	15000	-
8.1.5(Special tests)	-	350000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	25000	-
8.2.1.1.1(Glow-wire test)	-	15000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	15000	-
8.2.3(Enclosures for equipment)	-	60000	-
8.2.4(Mechanical and electrical properties of terminals)	-	25000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	25000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	25000	-
8.2.4.4(Pull-out test)	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	5000	-
8.2.5(Verification of actuating force (or moment))	-	5000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	20000	-
8.3.3.3(Temperature rise)	-	25000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	80000	-
8.3.3.5.2(Test circuits and connections)	-	500	-
8.3.4.3(Test circuit and test quantities)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	50000	-
8.3.4.1(General conditions for short-circuit tests)	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	50000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	60000	-
C.3(Electrical durability)	-	144000	-
C.2(Mechanical durability)	-	96000	-
C.1.2(Observation)	-	500	-
F 8.1.2.6("Dielectric test after stresses")	-	15000	-
F 8.1.2.4(Impact test)	-	5000	-
F.8.1.2.3("Rapid change of temperature test")	-	80000	-
F.8.1.2.5(Damp heat, cyclic)	-	80000	-
F.8.1.2.4(Impact test)	-	5000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	15000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	420000	-
H.8.6("Performance under short circuit current conditions")	-	50000	-
H.8.5("Making and breaking capacities")	-	80000	-
H.8.4(OFF-state current)	-	5000	-
H.8.2(Voltage drop test)	-	5000	-
J.8.5("Degree of protection for indicating towers")	-	60000	-
J.8.4.3(Indirect support mounting)	-	500	-
J.8.4.2.3(Vibration)	-	60000	-
J.8.4.2.2(Shock)	-	60000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	50000	-
J.8.3.3.3(Temp-rise tests)	-	25000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	15000	-
J.8.3.3.4(Dielectric test)	-	15000	-
J.7.1.12(Indicator lights with built-in transformers)	-	15000	-
J.7("Constructional requirements")	-	500	-
K 8.3.4("Performance under conditional shortcircuit current")	-	50000	-
K 8.3.7(Verification of robustness of the actuating system)	-	5000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	5000	-
K.8.3.6(Verification of direct opening action)	-	50000	-
L.8.4(Special test for mechanically linked contact elements)	-	50000	-
N.3(Method based on durability test results)	-	50000	-
L.8.4(Special test for mechanically linked contact elements)	-	50000	-
K.8.3.6(Verification of direct opening action)	-	50000	-
5.2.1(" Marking : General ")	-	0	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	0	-
K 8.3.7(Verification of robustness of the actuating system)	-	0	-
K 8.3.4("Performance under conditional shortcircuit current")	-	0	-
5.2.2(Terminal identification and marking)	-	0	-
J.7("Constructional requirements")	-	0	-
5.2.3(Functional markings)	-	0	-
J.7.1.12(Indicator lights with built-in transformers)	-	0	-
J.8.3.3.4(Dielectric test)	-	0	-
5.2.4(Emergency stop)	-	0	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	0	-
J.8.3.3.3(Temp-rise tests)	-	0	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	0	-
5.2.5(Operating diagram)	-	0	-
J.8.4.2.2(Shock)	-	0	-
5.2.5.1(Position indication)	-	0	-
J.8.4.2.3(Vibration)	-	0	-
J.8.4.3(Indirect support mounting)	-	0	-
5.2.5.2(Terminal markings for operating diagrams)	-	0	-
J.8.5("Degree of protection for indicating towers")	-	0	-
5.2.6(Time delay markings)	-	0	-
H.8.2(Voltage drop test)	-	0	-
5.3(Instructions for installation, operation and maintenance)	-	0	-
H.8.4(OFF-state current)	-	0	-
H.8.5("Making and breaking capacities")	-	0	-
7.1.2.2(Glow-wire testing)	-	0	-
H.8.6("Performance under short circuit current conditions")	-	0	-
7.1.3(Current-carrying parts and their connections)	-	0	-
Cl-7.3(Electromagnetic compatibility (EMC))	-	0	-
G.8.2.2(Pull-out test)	-	0	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	0	-
G.8.2.3(Torque test)	-	0	-
7.2.4.1(Making and breaking capacities)	-	0	-
7.2.4.1(Making and breaking capacities)	-	0	-
G.8.2.4(Push test)	-	0	-
G.8.2.5(Bend test)	-	0	-
F.8.1.2.1(Dielectric tests in new conditions)	-	0	-
7.2.4.3(Durability)	-	0	-
F.8.1.2.4(Impact test)	-	0	-
7.3.2.4(Electrostatic discharges)	-	0	-
F.8.1.2.5(Damp heat, cyclic)	-	0	-
F.8.1.2.3("Rapid change of temperature test")	-	0	-
7.3.2.6(Electrical fast transients/bursts)	-	0	-
F 8.1.2.4(Impact test)	-	0	-
F 8.1.2.6("Dielectric test after stresses")	-	0	-
C.1.2(Observation)	-	0	-
7.3.2.7(Surges)	-	0	-
C.2(Mechanical durability)	-	0	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	0	-
C.3(Electrical durability)	-	0	-
7.3.2.9(Power-frequency magnetic fields)	-	0	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	0	-
8.4.2.4(Surges)	-	0	-
7.3.2.10(Voltage dips and interruptions)	-	0	-
8.3.4.4 a)(Condition of the switching element after the test)	-	0	-
8.3.4.4 b)(Condition of the switching element after the test)	-	0	-
8.3.4.1(General conditions for short-circuit tests)	-	0	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	0	-
8.3.4.3(Test circuit and test quantities)	-	0	-
7.3.3(Emission)	-	0	-
8.3.3.5.2(Test circuits and connections)	-	0	-
8.3.3.5(Making and breaking capacities)	-	0	-
8.3.3.2(Operating limits of contactor relays)	-	0	-
7.2.3(Dielectric properties)	-	0	-
8.3.3.4(Dielectric properties)	-	0	-
8.3.3.3(Temperature rise)	-	0	-
8.1.5(Special tests)	-	0	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	0	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	0	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	0	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	0	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	-
8.2.1.1.1(Glow-wire test)	-	0	-
8.2.4.4(Pull-out test)	-	0	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	0	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	0	-
8.2.4.2(Tests of mechanical strength of terminals)	-	0	-
8.2.4(Mechanical and electrical properties of terminals)	-	0	-
8.2.3(Enclosures for equipment)	-	0	-
8.3.3.5.6 b(Dielectric verification)	-	0	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	0	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	0	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	0	-
7.3.2.11(Harmonics in the supply)	-	0	-
7.3.2.11(Harmonics in the supply)	-	0	-

-
Included w.e.f.18.02.2025 Exclusion Cl 7.3.2.11 (Harmonics in the supply) Cl 8.2.1.1.2 (Flammability, hot wire ignition and arc ignition tests (on materials)) Cl 8.2.3 (Enclosures for equipment) Cl 8.3.1 (Degree of protection of enclosed control circuit devices) Cl H.8.7 ("Verification of electromagnetic compatibility") Cl J.8.5 ("Degree of protection for indicating towers") Cl J.8.5 ("Degree of protection for indicating towers") Cl 8.2.1.1.2 (Flammability, hot wire ignition and arc ignition tests (on materials)) Cl 8.2.3 (Enclosures for equipment) Cl 7.3.2.11 (Harmonics in the supply)

6268

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

Twisted & Knuckled in Each Mesh Size

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing.
Cl.5(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.5(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	For Complete testing
Cl.6.1, 6.2, Table 1(Mesh Size)	-	500	For Complete testing
Cl.6.3, Table 1(Width of the fabric)	-	500	For Complete testing
Cl.6.3, Table 1(Length of the fabric)	-	500	For Complete testing
Cl.6.1, 6.2, Table 1(Nominal Dia of Mesh wire)	-	500	For Complete testing
Cl. 7.2 and Table 1(Line Wire (Diameter))	-	500	For Complete testing
Cl. 7.2 and Table 1(Line Wire (Number of wires))	-	500	For Complete testing
Cl.8(Chain link fence fabric(Mass of zinc coating)- IS 6745)	-	500	For Complete testing
Cl.8(Chain link fence fabric (Number of dips of zinc coating))	-	500	For Complete testing
Cl.8(Chain link fence fabric (Uniformity of Zinc coating)-IS 2633)	-	500	For Complete testing
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	500	For Complete testing
Cl.8(Chain link fence fabric [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	500	For Complete testing
Cl.9.1.1(Tensile test of mesh and line wires- IS 1608)	-	500	For Complete testing
Cl.9.1.2(Wrapping test of mesh and line wires-IS 1755)	-	500	For Complete testing
Cl.9.1.3(Twist test of mesh and line wires-IS 1717)	-	500	For Complete testing
Cl.9.1.4(Bend test of mesh and line wires- IS 1608)	-	500	For Complete testing
Cl.9.2(Line wire (Mass of zinc coating)- IS 6745)	-	500	For Complete testing
Cl.9.2(Line Wire (Number of dips of zinc coating))	-	500	For Complete testing
Cl.9.2(Line Wire (Uniformity of Zinc coating)-IS 2633)	-	500	For Complete testing
Cl.9.2(Line Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	500	For Complete testing
Cl.9.2(Line Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	500	For Complete testing
Cl.9.2(Mesh wire (Mass of zinc coating)- IS 6745)	-	500	For Complete testing
Cl.9.2(Mesh Wire (Number of dips of zinc coating))	-	500	For Complete testing
Cl.9.2(Mesh Wire (Uniformity of Zinc coating)-IS 2633)	-	500	For Complete testing
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating (Minimum complete turn of wrap)]- IS 4826/IS 12753)	-	500	For Complete testing
Cl.9.2(Mesh Wire [Adhesion test of Zinc coating( Ratio between mandrel diameter and of wire)]-IS 4826/IS 12753)	-	500	For Complete testing

-
-

6269

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Grade 1 / 2 / 3 / 4 / 5 / 6

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	1000	Complete Testing Charges
Cl 9(Press)	-	1000	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	500	Complete Testing Charges
Cl. 14(Weight)	-	700	Complete Testing Charges
Cl. 12, 13(Camber)	-	700	Complete Testing Charges
15.0 & 15.5(Telescopicity - IS:10748)	-	1000	Complete Testing Charges
7.1(Carbon %)	-	500	Complete Testing Charges
7.1(Manganese %)	-	500	Complete Testing Charges
7.1(Phosphorus %)	-	500	Complete Testing Charges
7.1(Sulphur %)	-	500	Complete Testing Charges
7.1(Silicon %)	-	500	Complete Testing Charges
7.1( Copper %)	-	500	Complete Testing Charges
7.1( Aluminium %)	-	500	Complete Testing Charges
7.1( Nb)	-	500	Complete Testing Charges
7.1(V)	-	500	Complete Testing Charges
7.1( Ti)	-	500	Complete Testing Charges
7.1(Cr)	-	500	Complete Testing Charges
7.1(Mo)	-	500	Complete Testing Charges
7.1(Ni)	-	500	Complete Testing Charges
7.1( Nitrogen%)	-	500	Complete Testing Charges
7.1(CE)	-	500	Complete Testing Charges
7.1(Carbon %)	-	500	Complete Testing Charges
7.1(Manganese %)	-	500	Complete Testing Charges
7.1(Phosphorus %)	-	500	Complete Testing Charges
7.1(Sulphur %)	-	500	Complete Testing Charges
7.1(Silicon %)	-	500	Complete Testing Charges
7.1( Copper %)	-	500	Complete Testing Charges
7.1( Aluminium %)	-	500	Complete Testing Charges
7.1( Nb)	-	500	Complete Testing Charges
7.1(V)	-	500	Complete Testing Charges
7.1( Ti)	-	500	Complete Testing Charges
7.1(Cr)	-	500	Complete Testing Charges
7.1(Mo)	-	500	Complete Testing Charges
7.1(Ni)	-	500	Complete Testing Charges
7.1( Nitrogen%)	-	1000	Complete Testing Charges
7.1(CE)	-	500	Complete Testing Charges
7.1(Carbon %)	-	500	Complete Testing Charges
7.1(Manganese %)	-	500	Complete Testing Charges
7.1(Phosphorus %)	-	500	Complete Testing Charges
7.1(Sulphur %)	-	500	Complete Testing Charges
7.1(Silicon %)	-	500	Complete Testing Charges
7.1( Copper %)	-	500	Complete Testing Charges
7.1( Aluminium %)	-	500	Complete Testing Charges
7.1( Nb)	-	500	Complete Testing Charges
7.1(V)	-	500	Complete Testing Charges
7.1( Ti)	-	500	Complete Testing Charges
7.1(Cr)	-	500	Complete Testing Charges
7.1(Mo)	-	500	Complete Testing Charges
7.1(Ni)	-	500	Complete Testing Charges
7.1( Nitrogen%)	-	500	Complete Testing Charges
7.1(CE)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	500	Complete Testing Charges
Cl. 12, 13(Thickness)	-	500	Complete Testing Charges
Cl. 8, Table 3(Elongation)	-	1000	Complete Testing Charges
Cl. 8, Table 3(Yield Stress)	-	1000	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	500	Complete Testing Charges
Cl 11(Workmanship)	-	500	Complete Testing Charges
Cl 9(Press)	-	1000	Complete Testing Charges
Cl 8 & Table 3(UTM)	-	1000	Complete Testing Charges
Cl 8 & Table 3(UTM)	-	1000	Complete Testing Charges
Cl 9(Press)	-	1000	Complete Testing Charges
Cl 11(Workmanship)	-	500	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	500	Complete Testing Charges
7.0 (7)(Micro Alloying elements - IS:8811)	-	500	Complete Testing Charges
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1000	Complete Testing Charges
8.0 (2)(Yield Strength-IS:1608(P1))	-	1000	Complete Testing Charges
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	1000	Complete Testing Charges
12 (1)(Width - SOP MT-23)	-	500	Complete Testing Charges
12 (2)(Thickness- SOP MT-23)	-	500	Complete Testing Charges
12 (3)(Mass of Strip- SOP MT-23)	-	500	Complete Testing Charges
15.0 & 15.1(Coil edges - IS:10748)	-	500	Complete Testing Charges
15.0 & 15.2(Surface finish - IS:10748)	-	500	Complete Testing Charges
15(Condition of Coil)	-	500	Complete Testing Charges
16(Marking)	-	500	Complete Testing Charges
3.4(Vehicle Fuel System)	-	500	Complete Testing Charges
9(Protective Treatment)	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	Complete Testing Charges
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	Complete Testing Charges
Cl 8 & Table 3(UTM)	-	1000	Complete Testing Charges
Cl 11(Workmanship)	-	500	Complete Testing Charges
Cl 9(Press)	-	1000	Complete Testing Charges
Cl 11(Workmanship)	-	500	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	500	Complete Testing Charges
Cl 9(Press)	-	1000	Complete Testing Charges
Cl 12 & 13(Length, Width & Thickness)	-	500	Complete Testing Charges
Cl 11(Workmanship)	-	500	Complete Testing Charges
Cl 8 & Table 3(UTM)	-	1000	Complete Testing Charges
CL 12(Average Width (04))	-	1000	Complete Testing Charges
CL 12(Average Thickness (08))	-	1000	Complete Testing Charges

-
-

6270

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

YST 160 / YST 210 / YST 240 / YST 310 / YST 355, Cold Formed / Hot Formed

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	500	Complete Testing Charges
Clause.4.0(Carbon)	-	500	Complete Testing Charges
Clause.4.0(Sulphur)	-	500	Complete Testing Charges
Clause.4.0(Sulphur)	-	500	Complete Testing Charges
Clause.4.0(Phosphorus)	-	500	Complete Testing Charges
Clause.4.0(Silicon)	-	14900	Complete Testing Charges
Clause.4.0(Manganese)	-	500	Complete Testing Charges
Clause.5.0(Supply of Material)	-	500	Complete Testing Charges
Clause.5.0(Supply of Material)	-	500	Complete Testing Charges
Clause.6.0(Workmanship)	-	500	Complete Testing Charges
Clause.7.0(Straightness)	-	500	Complete Testing Charges
Clause.8.0(Basis of Calculation)	-	500	Complete Testing Charges
Clause.9.0(Length)	-	500	Complete Testing Charges
Clause.10.0(Dimensions and properties)	-	500	Complete Testing Charges
Clause.10.0(Dimensions and properties)	-	500	Complete Testing Charges
Clause.11.0(General)	-	500	Complete Testing Charges
Clause.11.0(Outside Dimension)	-	500	Complete Testing Charges
Clause.11.0(Thickness)	-	500	Complete Testing Charges
Clause.11.0(Thickness)	-	500	Complete Testing Charges
Clause.11.0(Concavity and Convexity)	-	500	Complete Testing Charges
Clause.11.0(Squareness of Sides)	-	500	Complete Testing Charges
Clause.11.0(External Corner Radiius)	-	500	Complete Testing Charges
Clause.11.0(Straightness and twist)	-	500	Complete Testing Charges
Clause.12.0(Dimension Tolerances)	-	500	Complete Testing Charges
Clause.12.0(Dimension Tolerances)	-	500	Complete Testing Charges
Clause.13.0(Surface Protection)	-	500	Complete Testing Charges
Clause.14.0(Testing)	-	500	Complete Testing Charges
Clause.15.0(Tensile test)	-	500	Complete Testing Charges
Clause.15.0(Yield strength)	-	1000	Complete Testing Charges
Clause.15.0(Elognation Percent)	-	1000	Complete Testing Charges
Clause.18.0(Marking)	-	500	Complete Testing Charges
6(Workmanship)	-	500	Complete Testing Charges
10(Dimensions and Properties)	-	500	Complete Testing Charges
11(Measurement of Shape and Size)	-	500	Complete Testing Charges
12(Dimensions and Tolerances)	-	500	Complete Testing Charges
13(Surface Protection)	-	500	Complete Testing Charges
15(Tensile Test)	-	1000	Complete Testing Charges

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number