BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6301

SGS India Private Limited-Multilaboratory, Chennai

6114716

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	150	-
6.1.2(Coliform)	-	150	-
6.1.3(Faecal Streptococci)	-	375	-
6.1.4(Sulphite Reducing Anaerobe)	-	150	-
6.1.5(Pseudomonas aeruginosa)	-	300	-
6.1.6(Yeast and moould)	-	150	-
6.1.7(Salmonella)	-	675	-
6.1.8(Vibrio Cholera)	-	450	-
6.2/Table 1/i(Colour)	-	150	-
6.2/Table 1/ii(Odour)	-	37.5	-
6.2/Table 1/iii(Taste)	-	37.5	-
6.2/Table 1/iv(Turbidity)	-	37.5	-
6.2/Table 1/v(Total Dissoved)	-	75	-
6.2/Table 1/vi(pH Value)	-	37.5	-
6.2/Table 2/i(Nitrate)	-	300	-
6.2/Table 2/ii(Nitrite)	-	225	-
6.2/Table 2/iii(Sulphide)	-	150	-
6.2/Table 2/iv(Manganese)	-	150	-
6.2/Table 2/v(Copper)	-	150	-
6.2/Table 2/vi(Fluoride)	-	150	-
6.2/Table 2/vii(Barium)	-	150	-
6.2/Table 2/viii(Antimony)	-	150	-
6.2/Table 2/ix(Borate)	-	225	-
6.2/Table 2/x(Silver)	-	75	-
6.2/Table 2/xi(Chloride)	-	75	-
6.2/Table 2/xii(Sulphate)	-	150	-
6.2/Table 2/xiii(Magnesium)	-	75	-
6.2/Table 2/xiv(Calcium)	-	75	-
6.2/Table 2/xv(Sodium)	-	75	-
6.2/Table 2/xvi(Alkalinity)	-	75	-
6.2/Table 2/xvii(Selenium)	-	75	-
6.2/Table 2/xviii(Mineral Oil)	-	150	-
6.2/Table 2/xix(Phenolic Compounds)	-	375	-
6.2/Table 2/xx(Anionic Surface active agents)	-	375	-
6.2/Table 3/i(Arsenic)	-	150	-
6.2/Table 3/ii(Cadmium)	-	150	-
6.2/Table 3/iii(Cyanide)	-	225	-
6.2/Table 3/iv(Chromium)	-	75	-
6.2/Table 3/v(Mercury)	-	150	-
6.2/Table 3/vi(Lead)	-	150	-
6.2/Table 3/vii(Nickel)	-	75	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	150	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	2250	Testing charge applicable for Total pesticides (package)
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-

14 Feb, 2028

-
Included w.e.f 30.04.2025 Exclusion:Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max), Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

6302

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 12585 (2023)

SPECIFICATION FOR THERMOPLASTIC HOSES (TEXTILE REINFORCED) FOR WATER - GENERAL PURPOSE ( First Revision of IS 12585 )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Materials and Construction)	-	250	-
5(Materials and Construction)	-	250	-
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	250	-
6.2(Concentricity)	-	250	-
6.3(Tolerance on Length)	-	250	-
6.4(Minimum Wall Thickness)	-	250	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	250	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	250	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	250	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	250	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	800	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	800	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	800	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	800	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	800	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	800	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))	-	800	-
7, 7.2 -Table 3(Flexibility at 23°C)	-	800	-
7, 7.2 -Table 3(Low Temperature flexibility)	-	800	-
5(Materials and Construction)	-	0	-
5(Materials and Construction)	-	0	-
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	0	-
6.2(Concentricity)	-	0	-
6.3(Tolerance on Length)	-	0	-
6.4(Minimum Wall Thickness)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))	-	0	-
7, 7.2 -Table 3(Flexibility at 23°C)	-	0	-
7, 7.2 -Table 3(Low Temperature flexibility)	-	0	-
5(Materials and Construction)	-	0	-
5(Materials and Construction)	-	0	-
6.1(Dimensions (Inside diameters and tolerances on inside diameter))	-	0	-
6.2(Concentricity)	-	0	-
6.3(Tolerance on Length)	-	0	-
6.4(Minimum Wall Thickness)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Tensile Strength) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials (Minimum Elongation at break) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials-Resistance to ageing (Change in Tensile Strength from original value, max) -Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Tensile Strength from original value, max) -Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Resistance to ageing(Change in Elongation at break from original value, max) - Cover)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Lining)	-	0	-
7, 7.1 -Table 2(Physical Properties-Thermoplastic materials - Loss in mass on heating- Cover)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 23°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 23°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Proof Pressure at 60°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 1)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 2)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Minimum Burst Pressure at 60°C - Type 3)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Change in Length at maximum working pressure at 23°C (±8%))	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - Adhesion between components)	-	0	-
7, 7.2 -Table 3(Physical Properties-Finished Hoses - UV resistance (Xenon-arc lamp))	-	0	-
7, 7.2 -Table 3(Flexibility at 23°C)	-	0	-
7, 7.2 -Table 3(Low Temperature flexibility)	-	0	-

15 Aug, 2028

-
Included w.e.f 15.01.2025

6303

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	500	-
11.2(Legibility)	-	500	-
11.1(Durability)	-	500	-
11(Identification)	-	500	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3000	-
10.4(Flammability test- Unaffected portion)	-	1000	-
10.4(Flammability test-Burning after flame removal)	-	1000	-
table 1 e) 3) (IR constant- max. Temp)	-	1000	-
table 1 e) 3) (IR constant- Room temp )	-	1000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1000	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	1000	-
10.2(HV (room temperature))	-	1000	-
10.1(HV (water immersion))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.8(Smoke density rating)	-	2000	-
10.6(Halogen evolution)	-	2000	-
10.7(Temperature index)	-	2000	-
10.5(Oxygen index)	-	2000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	-
Table 1(Category Code)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1000	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	2000	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1000	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1000	-
Table 1 iii) d) 4)(Cracks Observed)	-	1000	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	1000	-
Table 1 iii) c) 4)(Cracks Observed)	-	1000	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	1000	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2000	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2000	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2000	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2000	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	1000	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	1000	-
Table 1 iii) c) 3)(Elongation variation)	-	2000	-
Table 1 iii) c) 3)(TS variation)	-	2000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	2000	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	1000	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	1000	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	500	-
8.3(Thickness of Sheath)	-	1000	-
5.2(Application )	-	500	-
5.3(Thickness of Insulation)	-	1000	-
9.1(Ovality)	-	1000	-
9(Overall dimensions)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	1000	-
4.2(Conductor resistance test)	-	1000	-
4.1(Wrapping test (for Al))	-	1000	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
4.1(Annealing test (for copper))	-	1000	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	500	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	500	-
12(CONSTRUCTION Core Identification)	-	500	-
8.1(Sheath Material )	-	500	-
7(Binder Tape)	-	500	-
6.2(Filler)	-	500	-
6.1(Filler)	-	500	-
5.1(Insulation)	-	500	-
4.4(Joints in Conductor)	-	500	-
4.4(Joints in Conductor)	-	500	-
4.1(Conductor - Material)	-	500	-
4.1(Conductor - Material)	-	500	-
10.11(Persulphate Test )	-	2000	-
12.0(Core identification)	-	500	-
4, IS 8130(Construction of conductor)	-	500	-
Table 2, IS 8130(No fo wire in a conductor)	-	500	-
8.3(Minimum thickness of Sheath)	-	1000	-
8.3(Avarage thickness of Sheath)	-	1000	-
5.3(Minimum thickness of insulation)	-	1000	-
5.3(Avarage thickness of insulation)	-	1000	-
table 1, 4.2(insulation resistance test)	-	1000	-
5.4(Mechanical properties before and after ageing)	-	2000	-
4.1(Material)	-	500	-
4.2(Electrical Resistance)	-	1000	-
5(INSULATION)	-	500	-
6(FILLER)	-	500	-
7(BINDER TAPE)	-	500	-
8(SHEATH)	-	500	-
9(OVERALL DIMENSIONS)	-	1000	-
10.1(High Voltage Test (Water Immersion Test))	-	2000	-
10.2(High Voltage Test (at Room Temperature))	-	1000	-
10.4(Flammability Test)	-	1000	-
10.5(Oxygen Index Test)	-	2000	-
10.6(Test for Halogen Acid Gas Evolution)	-	2000	-
10.7(Test for Temperature Index)	-	2000	-
10.8(Smoke Density Rating)	-	2000	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
10.1(Flex Test)	-	1000	-
10.11(Persulphate Test)	-	1000	-
11(IDENTIFICATION)	-	500	-
12(CORE IDENTIFICATION)	-	500	-
13(CABLE CODE)	-	500	-
15(PACKING AND MARKING)	-	500	-
16.1(Construction)	-	500	-
16.2(Tests)	-	500	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	500	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	500	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	500	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	500	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	500	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	500	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	500	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	500	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	500	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	500	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	500	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	500	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	500	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	500	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	500	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	500	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	500	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	500	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	500	-
Cl.19.1.4(Assembly of Cores)	-	500	-
Cl. 8.2(Application of Sheath)	-	500	-
10.3(Spark Test)	-	1000	-
10.3(Spark test)	-	1000	-
Table 4(Copper purity test)	-	2500	-
10.3(Spark Test)	-	1000	-

11 Mar, 2028

-
-

6304

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 14756 (2022)

Draft Indian Standard STAINLESS STEEL COOKWARE SPECIFICATION Second Revision of IS 14756

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material)	-	500	-
3.2(Material)	-	500	-
3.3(Material)	-	500	-
3.4(Material)	-	500	-
3.4(Material)	-	500	-
3.5(Material)	-	500	-
3.5(Material)	-	500	-
3.5(Material)	-	500	-
3.5(Material)	-	500	-
4.1 (Annex A)(Shapes and Dimensions)	-	100	-
4.2 (Table 1)(Shapes and Dimensions)	-	100	-
4.2 (Table 1)(Shapes and Dimensions)	-	100	-
4.2(Shapes and Dimensions)	-	100	-
4.3(Shapes and Dimensions)	-	100	-
4.4(Shapes and Dimensions)	-	100	-
5.1(Workmanship and Finish)	-	100	-
5.1(Workmanship and Finish)	-	100	-
5.1(Workmanship and Finish)	-	100	-
5.2(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.3(Workmanship and Finish)	-	100	-
5.4(Workmanship and Finish)	-	100	-
5.5(Workmanship and Finish)	-	100	-
5.6(Workmanship and Finish)	-	100	-
6.1(Staining Test)	-	1000	-
6.1(Staining Test)	-	1000	-
6.2(Mechanical Shock Test (For Cladded Utensils only))	-	1000	-
6.3(Thermal Shock Test (For Cladded Utensils only))	-	1000	-
6.4(Dry Heat Test (For Cladded Utensils only))	-	1000	-
6.5(Coating Thickness Test (For Copper Deposit))	-	1000	-
6.6(3 Ply)	-	1000	-
6.7.1(Nominal Capacity Test)	-	1000	-
6.7.2(Nominal Capacity Test- Diameter)	-	1000	-
6.8.1(Tests on Tempered Glass Lid)	-	1000	-
6.8.1(Tests on Tempered Glass Lid)	-	1000	-
6.8.2(Tests on Tempered Glass Lid (Ball drop test))	-	1000	-
6.8.3(Tests on Tempered Glass Lid (thermal shock test))	-	1000	-
6.8.4.1(Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-	1000	-
6.8.4.2(Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-	1000	-
As per Clause 3(Carbon)	-	500	-
As per Clause 3(Silicon)	-	500	-
As per Clause 3(Manganese)	-	500	-
As per Clause 3(Nickel)	-	500	-
As per Clause 3(Chromium)	-	500	-
As per Clause 3(Sulphur)	-	500	-
As per Clause 3(phosphorus)	-	500	-
As per Clause 3(Nitrogen)	-	500	-
As per Clause 3(Titanium)	-	500	-
As per Clause 3(Aluminium)	-	500	-
As per Clause 3(Copper)	-	500	-
As per Clause 3(Magnesium)	-	500	-
As per Clause 3(Iron)	-	500	-
As per Clause 3(Zinc)	-	500	-
As per Clause 3(Arsenic)	-	500	-
As per Clause 3(Antimony)	-	500	-
As per Clause 3(Bismith)	-	500	-
As per Clause 3(Lead)	-	500	-
As per Clause 3(Tellurium)	-	500	-
CL-5.4(CL-4.1 of IS 13395)(Construction)	-	100	-
CL-5.4(CL-4.2 of IS 13395)(Materials)	-	100	-
CL-5.4(CL-4.3 of IS 13395)(Selection and Size)	-	100	-
CL-5.4(CL-4.4 of IS 13395)("Position of Handle and Knob with Respect to Cookware")	-	100	-
CL_5.4(CL-4.5 of IS 13395)(Attachment to Cookware)	-	100	-
CL-5.4(CL-5.2 of IS 13395)(Bending Strength)	-	100	-
CL-5.4(CL-5.3 of IS 13395)(Torque Strength)	-	100	-
CL-5.4(CL-5.4 of IS 13395)(Impact Strength)	-	100	-
CL-5.4(CL-5.5 of IS 13395)(Fatigue Resistance)	-	100	-
CL-5.4(CL-5.6 of IS 13395)(Leakage)	-	100	-
CL-5.4(CL-5.7 of IS 13395)(Thermal Insulation)	-	100	-
CL-5.4(CL-5.8 of IS 13395)(Heat Resistance)	-	100	-
CL-5.4(CL-5.9 of IS 13395)(Washing Resistance (Type Test))	-	100	-
CL-5.4(CL-5.10 of IS 13395)(Burning Resistance)	-	100	-
3.1(Material)	-	0	-
3.2(Material)	-	0	-
3.3(Material)	-	0	-
3.4(Material)	-	0	-
3.4(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
4.1 (Annex A)(Shapes and Dimensions)	-	0	-
4.2 (Table 1)(Shapes and Dimensions)	-	0	-
4.2 (Table 1)(Shapes and Dimensions)	-	0	-
4.2(Shapes and Dimensions)	-	0	-
4.3(Shapes and Dimensions)	-	0	-
4.4(Shapes and Dimensions)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.4(Workmanship and Finish)	-	0	-
5.5(Workmanship and Finish)	-	0	-
5.6(Workmanship and Finish)	-	0	-
6.1(Staining Test)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test (For Cladded Utensils only))	-	0	-
6.3(Thermal Shock Test (For Cladded Utensils only))	-	0	-
6.4(Dry Heat Test (For Cladded Utensils only))	-	0	-
6.5(Coating Thickness Test (For Copper Deposit))	-	0	-
6.6(3 Ply)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Nominal Capacity Test- Diameter)	-	0	-
6.8.1(Tests on Tempered Glass Lid)	-	0	-
6.8.1(Tests on Tempered Glass Lid)	-	0	-
6.8.2(Tests on Tempered Glass Lid (Ball drop test))	-	0	-
6.8.3(Tests on Tempered Glass Lid (thermal shock test))	-	0	-
6.8.4.1(Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-	0	-
6.8.4.2(Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-	0	-
As per Clause 3(Carbon)	-	0	-
As per Clause 3(Silicon)	-	0	-
As per Clause 3(Manganese)	-	0	-
As per Clause 3(Nickel)	-	0	-
As per Clause 3(Chromium)	-	0	-
As per Clause 3(Sulphur)	-	0	-
As per Clause 3(phosphorus)	-	0	-
As per Clause 3(Nitrogen)	-	0	-
As per Clause 3(Titanium)	-	0	-
As per Clause 3(Aluminium)	-	0	-
As per Clause 3(Copper)	-	0	-
As per Clause 3(Magnesium)	-	0	-
As per Clause 3(Iron)	-	0	-
As per Clause 3(Zinc)	-	0	-
As per Clause 3(Arsenic)	-	0	-
As per Clause 3(Antimony)	-	0	-
As per Clause 3(Bismith)	-	0	-
As per Clause 3(Lead)	-	0	-
As per Clause 3(Tellurium)	-	0	-
CL-5.4(CL-4.1 of IS 13395)(Construction)	-	0	-
CL-5.4(CL-4.2 of IS 13395)(Materials)	-	0	-
CL-5.4(CL-4.3 of IS 13395)(Selection and Size)	-	0	-
CL-5.4(CL-4.4 of IS 13395)("Position of Handle and Knob with Respect to Cookware")	-	0	-
CL_5.4(CL-4.5 of IS 13395)(Attachment to Cookware)	-	0	-
CL-5.4(CL-5.2 of IS 13395)(Bending Strength)	-	0	-
CL-5.4(CL-5.3 of IS 13395)(Torque Strength)	-	0	-
CL-5.4(CL-5.4 of IS 13395)(Impact Strength)	-	0	-
CL-5.4(CL-5.5 of IS 13395)(Fatigue Resistance)	-	0	-
CL-5.4(CL-5.6 of IS 13395)(Leakage)	-	0	-
CL-5.4(CL-5.7 of IS 13395)(Thermal Insulation)	-	0	-
CL-5.4(CL-5.8 of IS 13395)(Heat Resistance)	-	0	-
CL-5.4(CL-5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
CL-5.4(CL-5.10 of IS 13395)(Burning Resistance)	-	0	-
3.1(Material)	-	0	-
3.2(Material)	-	0	-
3.3(Material)	-	0	-
3.4(Material)	-	0	-
3.4(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
3.5(Material)	-	0	-
4.1 (Annex A)(Shapes and Dimensions)	-	0	-
4.2 (Table 1)(Shapes and Dimensions)	-	0	-
4.2 (Table 1)(Shapes and Dimensions)	-	0	-
4.2(Shapes and Dimensions)	-	0	-
4.3(Shapes and Dimensions)	-	0	-
4.4(Shapes and Dimensions)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.3(Workmanship and Finish)	-	0	-
5.4(Workmanship and Finish)	-	0	-
5.5(Workmanship and Finish)	-	0	-
5.6(Workmanship and Finish)	-	0	-
6.1(Staining Test)	-	0	-
6.1(Staining Test)	-	0	-
6.2(Mechanical Shock Test (For Cladded Utensils only))	-	0	-
6.3(Thermal Shock Test (For Cladded Utensils only))	-	0	-
6.4(Dry Heat Test (For Cladded Utensils only))	-	0	-
6.5(Coating Thickness Test (For Copper Deposit))	-	0	-
6.6(3 Ply)	-	0	-
6.7.1(Nominal Capacity Test)	-	0	-
6.7.2(Nominal Capacity Test- Diameter)	-	0	-
6.8.1(Tests on Tempered Glass Lid)	-	0	-
6.8.1(Tests on Tempered Glass Lid)	-	0	-
6.8.2(Tests on Tempered Glass Lid (Ball drop test))	-	0	-
6.8.3(Tests on Tempered Glass Lid (thermal shock test))	-	0	-
6.8.4.1(Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-	0	-
6.8.4.2(Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-	0	-
As per Clause 3(Carbon)	-	0	-
As per Clause 3(Silicon)	-	0	-
As per Clause 3(Manganese)	-	0	-
As per Clause 3(Nickel)	-	0	-
As per Clause 3(Chromium)	-	0	-
As per Clause 3(Sulphur)	-	0	-
As per Clause 3(phosphorus)	-	0	-
As per Clause 3(Nitrogen)	-	0	-
As per Clause 3(Titanium)	-	0	-
As per Clause 3(Aluminium)	-	0	-
As per Clause 3(Copper)	-	0	-
As per Clause 3(Magnesium)	-	0	-
As per Clause 3(Iron)	-	0	-
As per Clause 3(Zinc)	-	0	-
As per Clause 3(Arsenic)	-	0	-
As per Clause 3(Antimony)	-	0	-
As per Clause 3(Bismith)	-	0	-
As per Clause 3(Lead)	-	0	-
As per Clause 3(Tellurium)	-	0	-
CL-5.4(CL-4.1 of IS 13395)(Construction)	-	0	-
CL-5.4(CL-4.2 of IS 13395)(Materials)	-	0	-
CL-5.4(CL-4.3 of IS 13395)(Selection and Size)	-	0	-
CL-5.4(CL-4.4 of IS 13395)("Position of Handle and Knob with Respect to Cookware")	-	0	-
CL_5.4(CL-4.5 of IS 13395)(Attachment to Cookware)	-	0	-
CL-5.4(CL-5.2 of IS 13395)(Bending Strength)	-	0	-
CL-5.4(CL-5.3 of IS 13395)(Torque Strength)	-	0	-
CL-5.4(CL-5.4 of IS 13395)(Impact Strength)	-	0	-
CL-5.4(CL-5.5 of IS 13395)(Fatigue Resistance)	-	0	-
CL-5.4(CL-5.6 of IS 13395)(Leakage)	-	0	-
CL-5.4(CL-5.7 of IS 13395)(Thermal Insulation)	-	0	-
CL-5.4(CL-5.8 of IS 13395)(Heat Resistance)	-	0	-
CL-5.4(CL-5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
CL-5.4(CL-5.10 of IS 13395)(Burning Resistance)	-	0	-

15 Aug, 2028

-
Included w.e.f 07.01.2025

6305

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	200	-
Clause 4.2(Material)	-	200	-
Clause 4.2.1(Lining)	-	200	-
Clause 4.2.2 (a)(Reinforcement)	-	500	-
Clause 4.2.2 (b)(Reinforcement)	-	500	-
Clause 4.2.3(Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	500	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1200	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1200	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	1000	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	1000	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	1000	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	200	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	200	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	200	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	200	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	200	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	200	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	200	-
Clause 5.2.1(BIS Certification Marking )	-	200	-

15 Aug, 2028

-
Included w.e.f. 12.12.2024

6306

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 9573 : Part 1 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision)

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 (General)	-	200	-
Clause 4.1 (General)	-	200	-
Clause 4.1(General)	-	200	-
Clause 4.2(Material)	-	500	-
Clause 4.2.1(Lining)	-	500	-
Clause 4.2.2(Reinforcement)	-	500	-
Clause 4.2.3(Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	500	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	500	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1200	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1200	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	1000	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Electrical Continuity Test)	-	1000	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	1000	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	200	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 2.5 MPa; )	-	200	-
Clause 5.2 (c)(Marking Nominal bore )	-	200	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	200	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	200	-
Clause 5.2 (f)(Marking IS 9573 (Part 1) )	-	200	-
Clause 5.2.1(BIS Certification Marking )	-	200	-

15 Aug, 2028

-
Included w.e.f 18.12.2024

6307

LILABA ANALYTICAL LABORATORIES LLP, SURAT

7137216

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

11700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	300	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	300	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	100	-
Clause 4.2(Design, Shape and Dimensions)	-	100	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	100	-
Clause 4.4(Capacity (Nominal))	-	100	-
Clause 4.4(Capacity (Brimfull))	-	200	-
Clause 4.5(Wall Thickness Top)	-	100	-
Clause 4.5(Wall Thickness Middle)	-	100	-
Clause 4.5(Wall Thickness Bottom)	-	100	-
Clause 4.6.1.1(Colour-Transparency)	-	250	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	200	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	200	-
Clause 4.6.3.1(Drop Impact test)	-	200	-
Clause 4.6.3.2(Stack Load test)	-	250	-
Clause 4.6.4.1(Overall Migration Container)	-	500	-
Clause 4.6.4.1(Overall Migration Closure)	-	500	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	250	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	250	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	250	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	250	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	250	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	250	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	250	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	350	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	1000	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	250	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	350	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	1000	-
Clause 4.6.4.3(Colour migration Container)	-	400	-
Clause 4.6.4.3(Colour migration Closure)	-	400	-
Clause 4.6.5(Water Potability Test (Taste))	-	500	-
Clause 4.6.5(Water Potability Test (odour))	-	500	-
Clause 5.1(Marking)	-	100	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	-
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	-
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	-
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	-
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	-
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	-
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	-
Clause 4.2(Design, Shape and Dimensions)	-	0	-
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	-
Clause 4.4(Capacity (Nominal))	-	0	-
Clause 4.4(Capacity (Brimfull))	-	0	-
Clause 4.5(Wall Thickness Top)	-	0	-
Clause 4.5(Wall Thickness Middle)	-	0	-
Clause 4.5(Wall Thickness Bottom)	-	0	-
Clause 4.6.1.1(Colour-Transparency)	-	0	-
Clause 4.6.1.2(Colour-Tint)	-	0	-
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	-
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	-
Clause 4.6.3.1(Drop Impact test)	-	0	-
Clause 4.6.3.2(Stack Load test)	-	0	-
Clause 4.6.4.1(Overall Migration Container)	-	0	-
Clause 4.6.4.1(Overall Migration Closure)	-	0	-
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	-
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	-
Clause 4.6.4.3(Colour migration Container)	-	0	-
Clause 4.6.4.3(Colour migration Closure)	-	0	-
Clause 4.6.5(Water Potability Test (Taste))	-	0	-
Clause 4.6.5(Water Potability Test (odour))	-	0	-
Clause 5.1(Marking)	-	0	-

11 Jun, 2029

-
Included w.e.f 08.12.2025

6308

Sleen India Biz venture Private Limited, Agra

9139736

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

Safety Shoes-Part-4

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	10% Discount on BIS sample.
Cl 5.2.2(" Height of upper ")	-	150	10% Discount on BIS sample.
Cl 5.2.3(Heel area)	-	150	10% Discount on BIS sample.
Cl 5.3.1.1(Construction of whole footwear)	-	200	10% Discount on BIS sample.
Cl 5.3.1.2(Upper/outsole bond strength)	-	750	10% Discount on BIS sample.
Cl 5.3.2(Leak proofness)	-	300	10% Discount on BIS sample.
Cl 5.3.3(Specific ergonomic features)	-	600	10% Discount on BIS sample.
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	4500	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2200	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1200	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2400	10% Discount on BIS sample.
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	4500	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2400	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	300	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	2800	10% Discount on BIS sample.
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1500	10% Discount on BIS sample.
Cl 5.3.6(Seam strength)	-	750	10% Discount on BIS sample.
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	10% Discount on BIS sample.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	400	10% Discount on BIS sample.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	400	10% Discount on BIS sample.
Cl 5.4.2(Thickness)	-	200	10% Discount on BIS sample.
Cl 5.4.3(Tear strength)	-	500	10% Discount on BIS sample.
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	500	10% Discount on BIS sample.
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	500	10% Discount on BIS sample.
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	500	10% Discount on BIS sample.
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	500	10% Discount on BIS sample.
Cl 5.4.5(Flexing resistance)	-	600	10% Discount on BIS sample.
Cl 5.4.6(Water vapour permeability and coefficient)	-	700	10% Discount on BIS sample.
Cl 5.4.7(Resistance to hydrolysis)	-	1000	10% Discount on BIS sample.
Cl 5.5.2(Lining- Tear strength)	-	450	10% Discount on BIS sample.
Cl 5.5.3(Lining- Abrasion resistance)	-	600	10% Discount on BIS sample.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	700	10% Discount on BIS sample.
Cl 5.6.2(Tear strength of tongue)	-	500	10% Discount on BIS sample.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	10% Discount on BIS sample.
Cl 5.7.2(Water permeability of insock)	-	500	10% Discount on BIS sample.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	10% Discount on BIS sample.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	600	10% Discount on BIS sample.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	600	10% Discount on BIS sample.
Cl 5.8.2.1(Thickness of Outsole)	-	200	10% Discount on BIS sample.
Cl 5.8.2.2(Cleated area)	-	150	10% Discount on BIS sample.
Cl 5.8.2.3(Cleat height)	-	150	10% Discount on BIS sample.
Cl 5.8.3(Outsole- Tear strength)	-	500	10% Discount on BIS sample.
Cl 5.8.4(Outsole- Abrasion resistance)	-	700	10% Discount on BIS sample.
Cl 5.8.5(Outsole-Flexing resistance)	-	700	10% Discount on BIS sample.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	10% Discount on BIS sample.
Cl 5.8.7(Interlayer bond strength)	-	450	10% Discount on BIS sample.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	500	10% Discount on BIS sample.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	500	10% Discount on BIS sample.
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	10% Discount on BIS sample.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	10% Discount on BIS sample.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	10% Discount on BIS sample.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	600	10% Discount on BIS sample.
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	500	10% Discount on BIS sample.
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	500	10% Discount on BIS sample.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	700	10% Discount on BIS sample.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	10% Discount on BIS sample.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	10% Discount on BIS sample.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	600	10% Discount on BIS sample.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	600	10% Discount on BIS sample.
Cl 6.2.4(Energy absorption of seat region)	-	450	10% Discount on BIS sample.
Cl 6.2.5(Water resistance)	-	300	10% Discount on BIS sample.
Cl 6.2.6(Ankle protection)	-	450	10% Discount on BIS sample.
Cl 6.2.7.1(Cut resistance footwear- design)	-	200	10% Discount on BIS sample.
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	200	10% Discount on BIS sample.
Cl 6.2.7.3(Resistance to cutting)	-	450	10% Discount on BIS sample.
Cl 6.2.8(Scuff cap)	-	600	10% Discount on BIS sample.
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1500	10% Discount on BIS sample.
Cl 6.3(Upper — Water penetration and absorption)	-	300	10% Discount on BIS sample.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	300	10% Discount on BIS sample.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	10% Discount on BIS sample.
Cl 6.4.3.2(Design of Ladder grip)	-	200	10% Discount on BIS sample.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	10% Discount on BIS sample.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	10% Discount on BIS sample.
Cl 7("Marking ")	-	200	10% Discount on BIS sample.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	300	10% Discount on BIS sample.

15 May, 2027

-
Included w.e.f 28.05.2025

6309

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	3000	-
8(Protection against accidental contact with live parts)	-	3000	-
9(Terminals)	-	4000	-
10(PROVISION FOR EARTHING)	-	5000	-
11(MOISTURE RESISTANCE)	-	4000	-
12(Electric Strength)	-	4000	-
13(Thermal endurance test for winding of ballasts)	-	3000	-
14(Fault conditions)	-	4000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	4000	-
17(Creepage distance and clearances)	-	3000	-
18(Screws, current carrying parts and connections)	-	3000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	5000	-
16(Enclosures)	-	4000	-
16(Bridging resistor in primary circuit)	-	3000	-
16(Capacitor and RC units)	-	4000	-
16(RF suppression (X-Y capacitors))	-	4000	-
16(Inductor)	-	4000	-
16(MOV/VDR)	-	4000	-
16(SMPS/Mains Transformer)	-	4000	-
16(PCB material)	-	4000	-
19(Metal base PCB for LED)	-	4000	-
19(Transparent cover)	-	5000	-
19(Bobbin)	-	4000	-
16(Insulated tape)	-	3000	-
16(Heat shrinkage sleeve)	-	4000	-
19(Terminals)	-	4000	-
16(Connector)	-	4000	-
16(Fuse)	-	4000	-
16(Internal wire)	-	4000	-
16(LED)	-	4000	-
16(Opto-coupler)	-	4000	-
16(Opto-coupler)	-	4000	-
16(EMI/EMC filter)	-	4000	-
16(Winding wire)	-	4000	-
16(Thin sheet materials)	-	4000	-
7(Marking)	-	3000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	3000	-
9(TERMINALS)	-	3000	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	4000	-
11(MOISTURE RESISTANCE AND INSULATION)	-	4000	-
12(ELECTRIC STRENGTH)	-	4000	-
14(FAULT CONDITIONS)	-	4000	-
15(TRANSFORMER HEATING)	-	4000	-
16(CONSTRUCTION)	-	4000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	2000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	3000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	-
20(RESISTANCE TO CORROSION)	-	3000	-
4(GENERAL REQUIREMENTS)	-	2000	-
5(GENERAL NOTES ON TESTS)	-	2000	-
6(CLASSIFICATION)	-	3000	-
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	3000	-
9(Terminals)	-	3000	-
10(PROVISION FOR EARTHING)	-	5000	-
11(MOISTURE RESISTANCE)	-	6000	-
12(Electric Strength)	-	5000	-
13(Thermal endurance test for winding of ballasts)	-	5000	-
14(Fault conditions)	-	5000	-
15(Transformer heating)	-	8000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	3000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	3000	-
16(Enclosures)	-	1000	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	1000	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	2000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	3000	-
9(TERMINALS)	-	2000	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	5000	-
11(MOISTURE RESISTANCE AND INSULATION)	-	3000	-
12(ELECTRIC STRENGTH)	-	5000	-
14(FAULT CONDITIONS)	-	5000	-
15(TRANSFORMER HEATING)	-	8000	-
16(CONSTRUCTION)	-	5000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	3000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	3000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	8000	-
20(RESISTANCE TO CORROSION)	-	5000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
6(CLASSIFICATION)	-	1000	-

26 Sep, 2027

-
Included w.e.f 01.01.2025 Exclusion : Cl 16 (RF suppression (X-Y capacitors), MOV/VDR), (SMPS/Mains Transformer), (PCB material), (Insulated tape), (Heat shrinkage sleeve), (Connector), (Fuse), (Internal wire), (LED), (Opto-coupler), (EMI/EMC filter), (Winding wire) Cl 19 (Metal base PCB for LED), (Transparent cover), (Bobbin)

6310

HT Product Services Private Limited, Noida

8175006

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	500	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	1000	-
11(Heating)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	2000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	2000	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	0	-
A.101(Pressure test)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
A.101(Pressure test)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
A.101(Pressure test)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
12(Charging of metal-ion batteries)	-	0	-

03 Dec, 2026

-
Included w.e.f 13.11.2024 Exclusion: Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts),Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), CL. 19.11.4.7 (Harmonics), 32 (Radiation, toxicity and similar hazards).

6311

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
7(Marking)	-	1250	--
6(Classification )	-	1250	--
6(Classification )	-	1250	--
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	--
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	--
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	--
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	--
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	2000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	--
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	--
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	750	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.24ofIS302-221:2011)(Component)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	750	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	--
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	--
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	--
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	--
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1500	--
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	750	--
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2250	--
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	6000	--
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	3000	--
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2500	--
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1250	--
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1500	--
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	--
(Cl.22 of IS 2082:2018)(Finish)	-	1000	--
Cl.22 of IS 2082:2018(Finish)	-	1000	--
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	1000	--
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	1500	--
Cl.19 of IS 2082:2018(Mixing Factor)	-	1250	--
Cl.18 of IS 2082:2018( Reheating Time)	-	2500	--
Cl.17 of IS 2082:2018(Hot Water Output)	-	3000	--
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	6000	--
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	2250	--
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	375	--
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	750	--
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	750	--
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	250	--
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	250	--
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	--
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	250	--
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	250	--
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	750	--
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	90	--
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	90	--
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	90	--
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	90	--
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	90	--
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	90	--
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	90	--
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	90	--
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	250	--
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	250	--
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	250	--
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	250	--
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	250	--
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	55	--
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	55	--
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	55	--
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	55	--
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	55	--
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	55	--
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	55	--
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	55	--
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	55	--
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	55	--
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	55	--
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	55	--
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	55	--
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	55	--
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	55	--
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	55	--
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	55	--
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	55	--
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	55	--
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	55	--
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	55	--
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	55	--
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	55	--
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	55	--
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	55	--
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	--
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	--
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	500	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	200	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	200	--
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	--
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1500	--
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	--
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	--
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	--
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	300	--
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	300	--
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	300	--
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	--
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	--
7.101(Marking : Indifiction of water inlet and water outlet )	-	50	--
7.14(Marking : Legibility and durability)	-	500	--
7.13(Marking : Official language of Instruction )	-	50	--
7.11(Marking : Indication of controls )	-	50	--
7.8(Marking : Terminals )	-	50	--
7.6(Marking : Symbol used )	-	50	--
7.1(Marking : Warning for Open- outlet )	-	50	--
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	50	--
7.1(Marking : Rated capacity)	-	50	--
7.1(Marking : Country of manufacture)	-	50	--
7.1(Marking: IP Number)	-	50	--
7.1(Marking: Symbol for Class II)	-	50	--
7.1(Marking: Model or type reference)	-	50	--
7.1(Marking : Rated power input)	-	50	--
7.1(Marking : Symbol for nature of supply )	-	50	--
4(GENERAL REQUIREMENT)	-	1250	--
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	--
12(THERMOSTAT SETTING)	-	1250	--
Cl-10(Mounting of the water heater)	-	1250	--
Cl-12(Thermostat setting)	-	1250	--
Cl-13(Measurement of energy consumption)	-	2250	--
Cl-14(Verification of the rated capacity)	-	2250	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	200	--
7.1(Marking : Statement for a pressure-relief device)	-	50	--
7.1(Marking : Rated pressure)	-	50	--
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	50	--
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	750	--
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	750	--
7.1(Marking : Rated Voltage )	-	50	--
Cl-11(Measurements of stored water temperature)	-	750	--
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	500	-

03 Oct, 2027

-
-

6312

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Remark
11.0(Marking)	-	-
10.1(Elongation)	-	-
10.1(Tensile Strength)	-	-
8.0(Transmitting Capacities)	-	-
7.2.2(Matched Belts - Code)	-	-
7.2.1(Matched Belts - Difference)	-	-
7.1(Belt Pitch Length)	-	-
6.0(Designation)	-	-
5 Table 2B(Cross sectional dimension)	-	-
5 Table 2B(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 2A(Cross sectional dimension)	-	-
5 Table 1(Cross sectional dimension)	-	-
5 Table 1(Cross sectional dimension)	-	-
5 Table 1(Cross sectional dimension)	-	-
5 Table 1(Cross sectional dimension)	-	-
4.1(Material and Workmanship)	-	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	-
4.1(Material and Workmanship)	-	-
7.2(Test Matched Belts)	-	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	-
Clause 5 Table 1(Nominal Height (T))	-	-
Clause 5 Table 1(Nominal Included Angle (A))	-	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	-
7.2(Test Matched Belts)	-	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	-
Clause 5 Table 1(Nominal Height (T))	-	-
Clause 5 Table 1(Nominal Included Angle (A))	-	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	-

25 Feb, 2027

-
-

6313

HT Product Services Private Limited, Noida

8175006

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation Of Cells and Batteries, IS 8144)	-	0	-
5(Dimensions, IS 8144)	-	1000	-
5(Dimensions, IS 8144)	-	0	-
6.1(Terminals, IS 8144)	-	1000	-
6.2(Terminals, IS 8144)	-	0	-
7.1(Requirements, IS 8144)	-	0	-
7.2(Requirements, IS 8144)	-	0	-
7.3(Requirements, IS 8144)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.2(Marking, IS 8144)	-	0	-
9.4(Initial Life Test, IS 8144)	-	1500	-
9.4(Initial Life Test (Flash light), IS 8144)	-	1500	-
9.4(Initial Life Test (Digital audio), IS 8144)	-	1500	-
9.4(Initial Life Test (Radio/clock), IS 8144)	-	1500	-
9.4(Initial Life Test (Remote control), IS 8144)	-	1500	-
9.4(Initial Life Test (Motor/toy), IS 8144)	-	1500	-
9.4(Initial Life Test (Tape recorder), IS 8144)	-	1500	-
9.4(Initial Life Test (Pulse test), IS 8144)	-	1500	-
9.4(Initial Life Test (Portable lighting), IS 8144)	-	1000	-
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	1000	-
9.5(Delayed Life Test, IS 8144)	-	1000	-
9.6(Leakage Test, IS 8144)	-	500	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	0	-
9.4(Initial Life Test, IS 8144)	-	0	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	0	-

03 Dec, 2026

-
-

6314

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	7000		10 % Discount (BIS)
5.2(Message Readability)	-	7000		10 % Discount (BIS)

04 Jul, 2027

-
-

6315

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

15700 View breakup
-

Clause No.	Exclusion	Remark
3.1(MATERIALS : CONDUCTOR)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
4.1.1(INSULATION : General Purjose Insulaiion)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
4.1.2(INSULATION : Heat Resisting Insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
6.1(MATERIALS : ARMGURING)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
6.2(MATERIALS : ARMGURING)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
8.1(CONSTRUCTION : CONDUCTOR)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
8.2(CONSTRUCTION : CONDUCTOR)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.1(INSULATION )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.2(INSULATION : Thickness of Insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.4(INSULATION : Application of Insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
10.1(CORE IDENTIFICATION)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
10.2(CORE IDENTIFICATION)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
10.3(CORE IDENTIFICATION)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
10.3.1(Arrangement of Marking)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
11.1(LAYING UP OF CORES)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
11.2(LAYING UP OF CORES)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
12.1(INNER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
12.2(INNER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.1.1(ARMOURING : Application)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.1.2(Armouring: Coverage )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.1.3(ARMOURING : Direction of lay )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.1.4(ARMOURING : Application)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.2(ARMOURING : Type of Armour)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.3(Armouring : Dimensions -Wire Diameter)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.4(ARMOURING : Joints)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.5.1(ARMOURING : Resistance)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 a)(ARMOURING: Tensile Strength)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 b)(ARMOURING: Elongation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 f)(ARMOURING: Mass of zinc coating )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
13.6 g)(ARMOURING: Resistivity)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
14.1(OUTER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
14.2(OUTER SHEATH)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
14.3(OUTER SHEATH : Colour )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 a) 4)(Resistance test - Neutral conductor )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)1)(Physical tests for sheath : Elongation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)4)(Hot deformation : Insulation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)4)(Hot deformation : Sheath )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)5)( Loss of mass in air oven- Insulation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)5)( Loss of mass in air oven- sheath )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)6)(Heat shock test- Insulation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)6)(Heat shock test- sheath )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)7)(Thermal stability- insulation )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 d)7)(Thermal stability- Sheath )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 e)(Insulation resistance test : Volume Resistivity )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 e)(Insulation resistance test : IR Constant )	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 f)(High voltage test ( water immersion test ))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1 g)(High voltage test at room temperature)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.4 a)(Cold bend test- Insulation ( Optional test))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.4 a)(Cold bend test- Sheath ( Optional test))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.4 b)(Cold impact test- Insulation ( Optional test))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.4 b)(Cold impact test- Sheath ( Optional test))	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
17.2(IDENTIFICATION : Cable Identification)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
17.2.1(IDENTIFICATION : Cable Identification)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
17.3(IDENTIFICATION : Cable Code)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.4(Flammability Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.4(Flammability Test- Un affected portion)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.4(Flammability Test- Period of Burning)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.3(Minimum Thickness of Reduce core insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
9.2(Thickness of Reduce core insulation)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.5(Oxygen Index Test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.6(Flame Retardance Test on Single Cables)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.7(Flame Retardance Test on Bunched Cables)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.9(Test for Halogen Acid Gas Evolution)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
16.1(Temperature Index)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
Cl No. 16.10(Smoke density test)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.
Cl No. 16.8(Test for specific optical density of smoke)	-	Up to 02 Core: Category 01 for Rs.15,700/- Category C1 for Rs.38,800/- Category C2 for Rs.47,200/- Add additional per core for Rs.2,500/- 10% discount is allowed to the repeat customers within One year.

31 Dec, 2026

-
-

6316

AIC-AMTZ Medivalley Incubation Council (Medivalley laboratory), Visakhapatnam

6172206

IS 13450 : Part 1 : SEC 2 (2018)

Medical electrical equipment: Part 1 general requirements for the basic safety and essential performance: Sec 2 collateral standard: electromagnetic disturbances - Requirements and tests (First Revision)

IN HOUSE LAB FACILITY

400000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 5(Electrical fast transients / bursts)	-	15000.00	BASIC EMC standard IEC 61000-4-4 (Any Parameter)-NABL
Table 5(Surges line-to-line)	-	15000.00	BASIC EMC standard IEC 61000-4-5 (Any Parameter)-NABL
Table 5(Surges line-to-ground)	-	15000.00	BASIC EMC standard IEC 61000-4-5 (Any Parameter)-NABL
Table 5(Conducted disturbances induced by RF fields)	-	15000.00	BASIC EMC standard IEC 61000-4-6(Any Parameter)-NABL
Table 4(ELECTROSTATIC DISCHARGE)	-	15000.00	BASIC EMC standard IEC 61000-4-2(Any Parameter)-NON NABL
Table 6(Electrical fast transients / bursts)	-	15000.00	BASIC EMC standard IEC 61000-4-4(Any Parameter)-NABL
Table 6(Surges line-to-line)	-	15000.00	BASIC EMC standard IEC 61000-4-5(Any Parameter)-NABL
Table 6(Conducted disturbances induced by RF fields)	-	15000.00	BASIC EMC standard IEC 61000-4-6(Any Parameter)-NABL
Table 7(ELECTROSTATIC DISCHARGE)	-	15000.00	BASIC EMC standard IEC 61000-4-2(Any Parameter)-Non NABL
Table 7(Conducted disturbances induced by RF fields)	-	15000.00	BASIC EMC standard IEC 61000-4-6(Any Parameter)-NABL
7.1(Protection of radio services and other equipment)	-	15000	ME Equipment & ME System containing X ray Generators
7.2(Protection of the PUBLIC MAINS NETWORK)	-	15000	Patient Physiological simulation
8.1(General)	-	15000	Immunity Test Setup
8.2(PATIENT physiological simulation)	-	15000	Immunity Test Parameter
8.3(Termination of PATIENT-COUPLED parts)	-	15000	Immunity Test Parameter
8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD)	-	15000	Immunity Test Setup
8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS)	-	15000	Immunity Test Parameter
8.9(IMMUNITY TEST LEVELS)	-	15000	Immunity Test Setup
8.10(IMMUNITY to proximity fields from RF wireless communications equipment)	-	15000	Immunity Test Setup
9(Test report)	-	5000	Its a test format as per the clause 9
8.7(Operating modes)	-	5000	Basic Safety
6(Documentation of the tests)	-	5000	Its a test format as per the clause 9
4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS)	-	5000	Risk assessment process
4.2(Non-ME EQUIPMENT used in an ME SYSTEM)	-	5000	Risk assessment process
4.3(General test conditions)	-	5000	Basic safety & Risk assessment
8.5(Subsystems)	-	5000	Test Report & Risk Management file
8.8(Non-ME EQUIPMENT)	-	5000	Test Report & Risk Management file
Table 8(ELECTROSTATIC DISCHARGE)	-	15000.00	BASIC EMC standard IEC 61000-4-2(Any Parameter)-Non NABL
Table 8(Electrical fast transients / bursts)	-	15000	BASIC EMC standard IEC 61000-4-4(Any Parameter)-Non-NABL.
Table 8(Surges line-to-ground)	-	15000	BASIC EMC standard IEC 61000-4-5(Any Parameter)-Non-NABL.
Table 8(Conducted disturbances induced by RF fields)	-	15000	BASIC EMC standard IEC 61000-4-6(Any Parameter)-Non-NABL.
5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents)	-	5000.00	ME Equipment and ME Systems Documentation Non NABL
Table 6(Electrical transient conduction along supply lines)	-	15000.00	EMC Immunity Test Facilities Non NABL
Table 6(Surges line-to-ground)	-	15000.00	EMC Immunity Test Facilities.

18 May, 2026

-
Exclusion: Cl.4.3 (Mains terminal disturbance voltage (Conducted EMISSIONS) CISPER16, Electromagnetic radiation disturbance (radiated Emissions) CISPER 11, Harmonics Current Emissions IEC 61000-3-2 & 3-3, Voltage changes, Voltage Fluctuations and flickers EMISSIONS IEC 61000-3-3, Immunity to proximity fields from RF wireless Communications Equipment IEC 61000-4-3, Power Frequency magnetic field IMMUNITY IEC61000-4-8, Voltages dips ,Short Interruptions and Voltages Variations IMMUNITY IEC 61000-4-11, Radiated RF Electromagnetic Field Immunity IEC61000-4-3), Cl.7.1 (PROTECTION OF RADIO SERVICES AND OTHER EQUIPMENTS), Table-5 (Voltage dips IEC 61000-4-11, Voltage Interrputions IEC 61000-4-11), Table-4 (Radiated RF Field EM Field IEC 61000-4-3, Proximity field From RF Wireless, Power Frequency Magnetic Fields) Cl.8.6 (Radiated RF Electromagnetic Field Immunity IEC61000-4-3), Cl.7.1 (Electromagnetic radiation disturbance (radiated Emissions) CISPER 11), Cl.7.2 (Harmonics distortions.)

6317

NATIONAL TEST HOUSE-ER (NTH), KOLKATA

5140804

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2000	-
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	250	-
Cl-5.2, Table- 1 (ii)(Checks)	-	250	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	250	-
Cl-5.2, Table- 1 (iv)(Dote)	-	250	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	250	-
Cl-5.2, Table- 1 (vi)(Joints)	-	250	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	250	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	250	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	250	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	250	-
Cl-5.2, Table- 1 (xi)(Patches)	-	250	-
Cl-5.2, Table- 1 (xii)(Splits)	-	250	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	250	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-

14 Jun, 2027

-
Included w.e.f.10.12.2024 Exclusion Cl-11.6 (Formaldehyde Content Test) Cl-11.7 (Steady-State Formaldehyde Emission Test)

6318

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

BWP,MR/8DS20,8DS21,9DS20,9DS21,10DS21,10DS20,12DS20,21

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	15% Discount for BIS Samples
9.2(Workmanship & Finish)	-	200	15% Discount for BIS Samples
9.3(Workmanship & Finish)	-	200	15% Discount for BIS Samples
11.1(Dimensions - Height)	-	200	15% Discount for BIS Samples
11.1(Dimensions - Width)	-	200	15% Discount for BIS Samples
11.1(Dimensions - Thickness)	-	200	15% Discount for BIS Samples
11.1(Dimensions - Variation in thickness)	-	200	15% Discount for BIS Samples
11.1(Dimensions - Squareness)	-	500	15% Discount for BIS Samples
11.12(End immersion test)	-	2500	15% Discount for BIS Samples
11.13(Knife Test)	-	1500	15% Discount for BIS Samples
11.14(Glue Adhesion Test)	-	1500	15% Discount for BIS Samples
11.1(Dimensions and Squareness Test)	-	0	0
11.1(Dimensions and Squareness Test)	-	0	0
11.1(Dimensions and Squareness Test)	-	0	0
11.1(Dimensions and Squareness Test)	-	0	0
11.1(Dimensions and Squareness Test)	-	0	0
11.2(General Flatness Test)	-	1500	15% Discount for BIS Samples
11.2(General Flatness Test)	-	0	0
11.2(General Flatness Test)	-	0	0
11.3(Local Planeness Test)	-	1500	15% Discount for BIS Samples
11.4(Impact Indentation Test)	-	1500	15% Discount for BIS Samples
11.4(Impact Indentation Test)	-	0	0
11.5(Flexure Test)	-	2000	15% Discount for BIS Samples
11.5(Flexure Test)	-	0	0
11.6(Edge Loading Test)	-	1500	15% Discount for BIS Samples
11.6(Edge Loading Test)	-	0	0
11.6(Edge Loading Test)	-	0	0
11.6(Edge Loading Test)	-	0	0
11.7.1(Shock Resistance Test)	-	2000	15% Discount for BIS Samples
11.7.2(Shock Resistance Test)	-	0	0
11.8(Buckling Test)	-	1500	15% Discount for BIS Samples
11.8(Buckling Test)	-	0	0
11.8(Buckling Test)	-	0	0
11.9.2(Slamming Test)	-	1000	15% Discount for BIS Samples
11.9.3(Slamming Test)	-	0	0
11.10(Misuse Test)	-	600	15% Discount for BIS Samples
11.11(Varying Humidity Test)	-	1500	15% Discount for BIS Samples
11.11(Varying Humidity Test)	-	0	0
11.12(End Immersion Test)	-	0	0
11.13(Knife Test)	-	0	0
11.14(Glue Adhesion Test)	-	0	0
11.15(Screw Withdrawal Resistance Test)	-	2500	15% Discount for BIS Samples
11.15(Screw Withdrawal Resistance Test)	-	0	0
Clause 9(WORKMANSHIP AND FINISH)	-	0	0
Clause 11.2(General Flatness Test)	-	0	0
Clause 11.3(Local Planeness Test)	-	0	0
Clause 11.4(Impact Indentation Test)	-	0	0
Clause 11.5(Flexure Test)	-	0	0
Clause 11.6(Edge Loading Test)	-	0	0
11.7(Shock Resistance Test)	-	0	0
Clause 11.8(Buckling Resistance Test)	-	0	0
Clause 11.9(Slamming Test)	-	0	0
11.1(Misuse Test)	-	0	0
11.11(Varying Humidity Test)	-	0	0
Clause 11.12(End Immersion Test)	-	0	0
Clause 11.13(Knife Test)	-	0	0
Clause 11.14(Glue Adhesion Test)	-	0	0
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	0
11.1(Dimensions and Squareness Test)	-	0	0
9.1(WORKMANSHIP AND FINISH)	-	0	0
9.2(WORKMANSHIP AND FINISH)	-	0	0
9.3(WORKMANSHIP AND FINISH)	-	0	0
Clause 6.1.3(moisture content)	-	500	15% Discount for BIS Samples

26 Aug, 2027

-
-

6319

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

Siliceous Fly ash / calcareous Fly ash

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	1000	15% Discount for BIS Samples
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	1000	15% Discount for BIS Samples
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	1000	15% Discount for BIS Samples
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	500	15% Discount for BIS Samples
5.1, 6.1, Table 1(Total chlorides)	-	500	15% Discount for BIS Samples
5.1, 6.1, Table 1(Loss on ignition)	-	500	15% Discount for BIS Samples
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	15% Discount for BIS Samples
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	500	15% Discount for BIS Samples
7.1, Table 1(Soundnes)	-	0	0
11.1(Supplies of pulverized fuel)	-	0	0
11.2(Tolerance Requirements for the Quantity of Pulverized Fuel Ash Packed in Bags)	-	0	0
Clauses 5.1 & 7.1 Table No. 2, SI No. (iii) (Soundness by autoclave test - Expansion of specimen)	-	1000	15% Discount for BIS Samples
Clauses 5.1 & 7.1 Table No. 2, SI No. (ii) (Particles retained on 45 micron IS Sieve (we sieving))	-	0	0
Clauses 5.1 & 7.1 Table No. 2, SI No. (i) (Fineness- Specific surface by blaine's method)	-	0	0
Clase No.7.1, Table No.2, Sl.No.i(Fineness-Specific surface by Blaine's permeability method)	-	0	0
Clase No.7.1, Table No.2, Sl.No.ii(Particle retained on 45 micron IS sieve (wet sieving))	-	0	0
Clase No.7.1, Table No.2, Sl.No.iii(Soundness by autoclave tests)	-	0	0
7.2(Uniformity Requirements)	-	0	0
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1000	15% Discount for BIS Samples
6.2(moisture content)	-	500	15% Discount for BIS Samples

26 Aug, 2027

-
-

6320

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

Calcareous Fly ash / Silliceous Fly ash

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	1000	15% Discount for BIS Samples
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	1000	15% Discount for BIS Samples
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1000	15% Discount for BIS Samples
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	1000	15% Discount for BIS Samples
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	15% Discount for BIS Samples
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	15% Discount for BIS Samples
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	15% Discount for BIS Samples
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	500	15% Discount for BIS Samples
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	0	0
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1000	15% Discount for BIS Samples
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	1000	15% Discount for BIS Samples
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	15% Discount for BIS Samples
5.1&7.1, table-2 (III)(Lime Reactivity)	-	0	0
5.1, 7.1, table-2, iii(Lime reacitivity)	-	0	0
7.2(Uniformity Requirements)	-	0	0
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	1000	15% Discount for BIS Samples
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	2000	15% Discount for BIS Sample
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	15% Discount for BIS Samples

26 Aug, 2027

-
-

6321

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

Except Tensile Properties 0.2 % proof Strength and 1.0 % Proof Strength at Elevated Temperature

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	0	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	2000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	2000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	2000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	2000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	2000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	10000	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	10000	Including Rate for Chemical Tests
Cl - 9.1,9.5,13.2(Hardness)	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-

18 Dec, 2027

-
Including w.e.f. 28.10.2024 Excluding Cl.9.2 (0.2 % Proof Strength and 1.0 % Proof Strength at Elevated Temperature)

6322

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	--
6(Classification- IS 302-1)	-	100	--
7.1(Marking- IS 302-1)	-	60	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	-
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.1(Marking- IS 302-1)	-	40	--
7.3(Marking- IS 302-1)	-	40	--
7.4(Marking- IS 302-1)	-	40	--
7.6(Marking- IS 302-1)	-	40	--
7.7(Marking- IS 302-1)	-	40	--
7.8(Marking- IS 302-1)	-	40	--
7.11(Marking- IS 302-1)	-	40	--
7.12(Marking- IS 302-1)	-	40	--
7.13(Marking- IS 302-1)	-	40	--
7.14(Marking- IS 302-1)	-	40	--
7.15(Marking- IS 302-1)	-	40	--
7.101(Marking)	-	40	--
8( Protection Against Electric Shock, IS 302-1)	-	500	--
10(Power Input and Current, IS 302-1)	-	900	--
11(Heating, IS 302-1)	-	500	--
11(Heating, IS 302-1)	-	500	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
11(Heating, IS 302-1)	-	1000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	750	--
15.1(Moisture Resistance, IS 302-1)	-	500	--
15.2(Moisture Resistance, IS 302-1)	-	500	--
15.3(Moisture Resistance, IS 302-1)	-	500	--
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	--
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	--
19.4(Abnormal Operation, IS 302-1)	-	100	--
19.4(Abnormal Operation, IS 302-1)	-	100	--
19.5(Abnormal Operation, IS 302-1)	-	80	--
19.5(Abnormal Operation, IS 302-1)	-	100	--
19.7(Abnormal Operation)	-	80	--
19.9(Abnormal Operation)	-	80	--
19.1(Abnormal Operation)	-	80	--
19.101(Abnormal Operation)	-	80	--
20.1(Stability & Mechanical Hazards, IS 302-1)	-	250	--
20.2(Stability & Mechanical Hazards, IS 302-1)	-	250	--
21.1(Mechanical Strength, IS 302-1)	-	200	--
21.2(Mechanical Strength, IS 302-1)	-	200	--
21.101(Mechanical Strength, IS 302-2-3)	-	100	--
22(Construction, IS 302-1)	-	80	--
22.101(Construction)	-	60	--
22.102(Construction)	-	60	--
22.103(Construction)	-	60	--
22.104(Construction)	-	60	--
22.105(Construction)	-	60	--
22.106(Construction)	-	60	--
22.107(Construction)	-	60	--
23.1(Internal Wiring, IS 302-1)	-	50	--
23.2(Internal Wiring, IS 302-1)	-	50	--
23.3(Internal Wiring, IS 302-1)	-	50	--
23.4(Internal Wiring, IS 302-1)	-	50	--
23.5(Internal Wiring, IS 302-1)	-	50	--
23.6(Internal Wiring, IS 302-1)	-	50	--
23.7(Internal Wiring, IS 302-1)	-	50	--
23.8(Internal Wiring, IS 302-1)	-	50	--
23.9(Internal Wiring, IS 302-1)	-	50	--
23.10(Internal Wiring, IS 302-1)	-	50	--
24.1(Components, IS 302-1)	-	100	--
24.2(Components, IS 302-1)	-	100	--
24.4(Components, IS 302-1)	-	100	--
24.5(Components, IS 302-1)	-	100	--
24.6(Components, IS 302-1)	-	100	--
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	50	--
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	25	--
26(Terminals for External Conductors, IS 302-1)	-	500	--
27.1(Provision for Earthing, IS 302-1)	-	100	--
27.2(Provision for Earthing, IS 302-1)	-	100	--
27.3(Provision for Earthing, IS 302-1)	-	100	--
27.4(Provision for Earthing, IS 302-1)	-	100	--
27.5(Provision for Earthing, IS 302-1)	-	500	--
28(Screws & Connections, IS 302-1)	-	500	--
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	--
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	--
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	--
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	--
31(Resistance of Rusting, IS 302-1)	-	500	--
4(General requirement)	-	50	--
16(Leakage current and electric strength)	-	1000	--
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
17(Overload protection of transformers and associated circuits)	-	0	This clause of Part 1 is applicable.
18(Endurance)	-	0	This clause of Part 1 is not applicable.
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	--
19(Abnormal operation)	-	500	--
25(Supply Connection and External Flexible Cords)	-	50	--
14(Transient Over Voltages, IS 302-1)	-	1000	-

03 Oct, 2027

-
Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) 19.11.4.1 to 19.11.4.7

6323

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	--
6(Classification- IS 302-1)	-	50	--
7.1(Marking- IS 302-1)	-	200	--
7.1(Marking- IS 302-1)	-	200	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.2(Marking)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.1(Marking- IS 302-1)	-	500	--
7.4(Marking)	-	500	--
7.5(Marking)	-	500	--
7.6(Marking)	-	500	--
8( Protection Against Electric Shock, IS 302-1)	-	500	--
9(Starting, IS 302-1)	-	500	--
10(Power Input and Current, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
11(Heating, IS 302-1)	-	2000	--
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1250	--
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1250	--
15.1(Moisture Resistance, IS 302-1)	-	1000	--
15.2(Moisture Resistance-Spillage test)	-	1000	--
15(Moisture Resistance, IS 302-1)	-	1000	--
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1250	--
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1250	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
19(Abnormal Operation, IS 302-1)	-	1000	--
20(Stability & Mechanical Hazards, IS 302-1)	-	500	--
20(Stability & Mechanical Hazards, IS 302-1)	-	500	--
21(Mechanical Strength, IS 302-1)	-	750	--
21(Mechanical Strength, IS 302-1)	-	750	--
22.1(Construction, IS 302-1)	-	1500	--
22.2(Construction)	-	1500	--
22.3(Construction)	-	1500	--
22.4(Construction)	-	1500	--
22.5(Construction)	-	1500	--
22.6(Construction)	-	1500	--
22.8(Construction)	-	1500	--
22.9(Construction)	-	1500	--
22.1(Construction)	-	1500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
23(Internal Wiring, IS 302-1)	-	500	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.1(Components, IS 302-1)	-	750	--
24.2(Components)	-	750	--
24.4(Components)	-	750	--
24.5(Components)	-	750	--
24.6(Components)	-	750	--
24.7(Components)	-	750	--
24.8(Components)	-	750	--
24.9(Components)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
25(Supply Connection and External Flexible Cords, IS 302-1)	-	750	--
26(Terminals for External Conductors, IS 302-1)	-	750	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
27(Provision for Earthing, IS 302-1)	-	500	--
28(Screws & Connections, IS 302-1)	-	500	--
29(Clearances and Distances through Insulation, IS 302-1)	-	500	--
29(Clearances and Distances through Insulation, IS 302-1)	-	500	--
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1500	--
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1500	--
31(Resistance of Rusting, IS 302-1)	-	1500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	500	--
34.3(Whisking egg whites )	-	500	--
34.4(IDLI batter-Grinding of black gram)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.4(IDLI batter-Grinding of rice)	-	1000	--
34.5.1 (a)(Operational test for juicers )	-	1000	--
34.5.1 (b)(Operational test for juicers )	-	1000	--
34.5.2(Operational test for juicers )	-	1000	--
35(Temperature withstand test for bowl)	-	200	--
36(Test for controls )	-	500	--
37(Strength of Assembly )	-	500	--
37(Strength of Assembly )	-	500	--
Cl 37(Strength of assembly)	-	500	--
Cl 36(Test for controls)	-	1500	--
Cl 35(Temperature withstand test for bowl)	-	600	--
Cl.31(Resistance to rusting)	-	250	--
Cl.30(Resistance to heat and fire)	-	250	--
CL.29(Clearances, Creepage distances and Solid Insulation)	-	200	--
Cl.28(Screws and connections)	-	200	--
Cl.27(Provision for Earthing)	-	500	--
Cl.26(Terminals for external conductors)	-	200	--
Cl.25(Supply connection and external flexible cords)	-	100	--
Cl.24(Components)	-	100	--
Cl.23(Internal wiring)	-	100	--
Cl.22(Construction)	-	200	--
Cl.21(Mechanical Strength)	-	250	--
Cl.20(Stability & Mechanical Hazards)	-	250	--
Cl.19(Abnormal operation)	-	500	--
Cl.18(Endurance)	-	2500	--
Cl. 16(Leakage current and Electric strength)	-	750	--
Cl.15(Moisture Resistance)	-	500	--
Cl.13(Leakage current and Electric strength at operating temperature)	-	1000	--
Cl.11(Temperature rise/ Heating)	-	1500	--
Cl.10(Power Input and Current)	-	1000	--
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	500	--
Cl. 7(Marking and instructions)	-	100	--
Cl. 6(Classification)	-	200	--
3(GENERAL REQUIREMENTS)	-	50	--
4(GENERAL NOTES ON TESTS)	-	50	--
5(RATING)	-	100	--
Cl 34(Operational Tests)	-	1500	--
14(Transient Over Voltages, IS 302-1)	-	500	-
Cl.14(Transient Over voltage)	-	500	-

03 Oct, 2027

-
-

6324

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	100	--
8.1.1(Protection against live parts in all positions)	-	500	--
8.1.2(Protection against live parts in openings)	-	500	--
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	--
8.1.4(Protection against live parts against protective impedance)	-	500	--
9(Starting of motor operation test requirements and tests)	-	500	--
10.1(Power input)	-	1000	--
10.2(Current input)	-	1000	--
11.1(General)	-	100	--
11.2(General)	-	800	--
11.3(Heating)	-	1000	--
13.1(General)	-	500	--
13.2(Leakage current at operating temperature)	-	1000	---
13.3(Electric Strength at operating temperature)	-	500	--
15.0(General)	-	500	--
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	--
15.2(Spillage Test)	-	500	--
15.3(Humidity Test)	-	1000	--
16.0(General)	-	500	--
16.1(General)	-	500	---
16.2(Leakage Current (after Clause 15))	-	1000	---
16.3(Electric Strength (after clause 15 and 16.2))	-	500	--
17(Over Load Protection of Transformers and associated circuits)	-	1000	---
18(Endurance Test requirements and tests)	-	2000	--
19(Abnormal Operation)	-	2000	--
20(Stability test)	-	2000	--
21(Mechanical Strength Test)	-	2000	--
22(Construction verification related test)	-	2000	--
23(General)	-	2000	---
24(Components)	-	2000	--
25(Supply connection and external flexible cords)	-	2000	--
26(Terminals for external conductors)	-	2000	--
27(Provision for earthing)	-	2000	--
28(Screw test and connections)	-	1000	--
29(clearance, creepage distances and solid insulation)	-	1000	--
30.1(Ball pressure test)	-	500	---
30.2(Glow Wire Test)	-	1000	--
30.2(Needle Flame Test)	-	500	--
31(Resistance to Rusting)	-	1000	--
4(General requirement)	-	50	--
16(Leakage current and electric strength)	-	500	--
17(Overload protection of transformers and associated circuits)	-	1000	--
18(Endurance)	-	2000	--
8.1.5(Live parts of built-in appliances)	-	500	--
11.4(Heating appliances)	-	1000	--
11.5(Motor-operated appliances)	-	1000	--
11.6(Combined appliances)	-	1000	--
11.7(Duration corresponding)	-	1000	--
11.8(Temperature rise)	-	1000	--
4(General Requirement)	-	50	-
5(General conditions for tests)	-	50	--
6(Classification- IS 302-1)	-	250	--
14(Transient Over Voltages)	-	1000	-

03 Oct, 2027

-
19.11.4.1 to 19.11.4.7 32 (Radiation Toxicity and Similar Hazards) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

6325

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

13600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	--
30.0(Resistance To Heat and Fire)	-	1000	--
29.0(Creepage Distances and Clearances)	-	500	--
28.0(Screws and Connections)	-	500	--
27.0(Provision For Earthing)	-	500	--
26.0(Terminals for external conductors)	-	500	--
25.0(Supply Connection and External Flexible Cords)	-	500	--
23.0(Internal Wiring)	-	300	--
22.0(Construction)	-	200	--
21.0(Mechanical Strength)	-	200	--
20.0(Stability and mechanical hazards)	-	300	--
19.0(Abnormal Operation)	-	500	--
17.0(Overload Protection of transformer and associated circuit)	-	500	--
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	--
15.0(Moisture resistance)	-	1500	--
13.0(Leakage Current and electric strength at operating temperature)	-	1500	--
11.0(Heating)	-	1000	--
10.0(Input and Current)	-	1000	--
8.0(Protection against access to live parts)	-	500	--
6.0(Classification)	-	100	--
7.0(Marking and Instructions)	-	500	--
24(Components)	-	500	--
4(GENERAL REQUIREMENTS)	-	0	Visual inspection
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	Visual Inspection
14.0(Transient Overvoltage)	-	1000	-

03 Oct, 2027

-
Cl 19.11.4.1 to Cl 19.11.4.7 32 (RADIATION TOXICITY AND SIMILAR HAZARDS)

6326

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS/IEC 60947 : Part 5 : Sec 2 (2019)

LLow-Voltage Switchgear and Controlgear Part 5 Control Circuit Devices and Switching Elements Section 2 Proximity Switches ( First Revision )

1559000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	0	No test
5.2(Operating conditions)	-	0	No test
6.2(Marking)	-	2000	Visual inspection For 1 Samples)
5.3(Rated and limiting values for the proximity switch and switching element(s))	-	0	No test
6.4(Environmental information)	-	0	No test
7(Normal service, mounting and transport conditions)	-	0	No test
8(Constructional and performance requirements)	-	1559000	Full tests as per Seq. 1 to Seq. 5 tests and CL. 9.2, 9.3 Annex B & Annex C are covered in this general clause
8.1.1.2(Glow-wire testing)	-	30000	For 1 Sample
8.1.1.3(Test based on flammability categor)	-	60000	For 1 Sample
8.1.2(Current-carrying parts and their connections)	-	0	no tests
8.1.3(Clearances and creepage distances)	-	17000	For 1 Sample
8.1.7.1(Constructional requirements)	-	80000	For 1 Sample
8.1.9(Provisions for protective earthing)	-	3000	For 1 Sample
8.1.10(Degree of protection)	-	60000	For 1 Sample
8.1.11(Requirements for proximity switches with integrally connected cables)	-	25000	For 1 Sample
8.1.15(Protection against artificial optical radiation)	-	7000	For 1 Sample
8.2(Performance requirements)	-	1559000	Full tests as per Seq. 1 to Seq. 5 tests and CL. 9.2, 9.3 Annex B & Annex C are covered in this general clause
8.2.2(Temperature-rise)	-	15000	For 1 Sample
8.2.3(Dielectric properties)	-	15000	For 1 Sample
8.2.3.2(Impulse withstand voltage)	-	10000	For 1 Sample
8.2.4(Ability to make and break under normal load and abnormal load conditions)	-	60000	For 1 Sample
8.2.5(Conditional short-circuit current)	-	45000	For 1 Sample
8.2.6(Electromagnetic compatibility (EMC))	-	520000	For all EMC tests for 1 sample
8.2.6.2(Immunity)	-	0	Covered under above test
8.2.6.2.2(Electrostatic discharges)	-	40000	For 1 sample
8.2.6.2.3(Radiated radio-frequency electromagnetic fields)	-	160000	For 1 sample
8.2.6.2.4(Electrical fast transients/bursts)	-	40000	For 1 sample
8.2.6.2.5(Surges)	-	0	Test not applicable for these products
8.2.6.2.6(Conducted disturbances induced by radio-frequency fields)	-	40000	For 1 sample
8.2.6.2.7(Power-frequency magnetic fields)	-	40000	For 1 sample
8.2.6.2.8(Voltage dips and interruptions)	-	60000	For 1 sample
8.2.6.3(Emission)	-	140000	For 1 sample for Conducted Emission Test & Radiated Emission Test
8.3(Physical dimensions)	-	0	No test
8.4(Shock and vibration and special environmental conditions)	-	215000	For 1 sample
9.2(Compliance with constructional requirements)	-	230000	(IP, Mech. & Elect. Properties of terminals, Glow wire, Flammability) for 1 sample
9.2.2.1(Test of resistance to abnormal heat and fire)	-	30000	for 1 sample
9.2.2.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	60000	for 1 sample
9.3.3.4(Dielectric properties)	-	15000	for 1 sample
9.3.3.4.5(Impulse withstand voltage test)	-	10000	for 1 sample
9.3.3.5(Making and breaking capacities)	-	60000	for 1 sample
9.6(Verification of the electromagnetic compatibility)	-	520000	For all EMC tests for 1 sample
B.9.1.2.3(Cable tests)	-	25000	For all as per annex c. for 1 sample
B.9.1.2.4(Change of temperature test)	-	45000	for 1 sample
B.9.1.2.5(Impact test)	-	5000	for 1 sample
B.9.1.2.6(Damp heat, cyclic test)	-	70000	for 1 sample
B.9.1.2.7(Dielectric test after stresses)	-	5000	for 1 sample
C.9.1.2(Pull test)	-	10000	for 1 sample
C.9.1.3(Torque test)	-	5000	for 1 sample
C.9.1.4(Push test)	-	5000	for 1 sample
C.9.1.5(Bend test)	-	5000	for 1 sample
9.3.4(Performance under short-circuit current conditions)	-	45000	for 1 sample
9.4(Testing of operating distances)	-	15000	for 1 sample
9.5(Testing for the frequency of operating cycles)	-	15000	for 1 sample
8.1.10(Degree of protection)	-	60000	for 1 sample
9.3.3.2(Operating limits)	-	5000	for 1 sample
5.1(General)	-	0	Duplicate clause, already considered
5.2(Operating conditions)	-	0	Duplicate clause, already considered
6.2(Marking)	-	0	Duplicate clause, already considered
5.3(Rated and limiting values for the proximity switch and switching element(s))	-	0	Duplicate clause, already considered
6.4(Environmental information)	-	0	Duplicate clause, already considered
7(Normal service, mounting and transport conditions)	-	0	Duplicate clause, already considered
8(Constructional and performance requirements)	-	0	Duplicate clause, already considered
8.1.1.2(Glow-wire testing)	-	0	Duplicate clause, already considered
8.1.1.3(Test based on flammability categor)	-	0	Duplicate clause, already considered
8.1.2(Current-carrying parts and their connections)	-	0	Duplicate clause, already considered
8.1.3(Clearances and creepage distances)	-	0	Duplicate clause, already considered
8.1.7.1(Constructional requirements)	-	0	Duplicate clause, already considered
8.1.9(Provisions for protective earthing)	-	0	Duplicate clause, already considered
8.1.10(Degree of protection)	-	0	Duplicate clause, already considered
8.1.11(Requirements for proximity switches with integrally connected cables)	-	0	Duplicate clause, already considered
8.1.15(Protection against artificial optical radiation)	-	0	Duplicate clause, already considered
8.2(Performance requirements)	-	0	Duplicate clause, already considered
8.2.2(Temperature-rise)	-	0	Duplicate clause, already considered
8.2.3(Dielectric properties)	-	0	Duplicate clause, already considered
8.2.3.2(Impulse withstand voltage)	-	0	Duplicate clause, already considered
8.2.4(Ability to make and break under normal load and abnormal load conditions)	-	0	Duplicate clause, already considered
8.2.5(Conditional short-circuit current)	-	0	Duplicate clause, already considered
8.2.6(Electromagnetic compatibility (EMC))	-	0	Duplicate clause, already considered
8.2.6.2(Immunity)	-	0	Duplicate clause, already considered
8.2.6.2.2(Electrostatic discharges)	-	0	Duplicate clause, already considered
8.2.6.2.3(Radiated radio-frequency electromagnetic fields)	-	0	Duplicate clause, already considered
8.2.6.2.4(Electrical fast transients/bursts)	-	0	Duplicate clause, already considered
8.2.6.2.5(Surges)	-	0	Duplicate clause, already considered
8.2.6.2.6(Conducted disturbances induced by radio-frequency fields)	-	0	Duplicate clause, already considered
8.2.6.2.7(Power-frequency magnetic fields)	-	0	Duplicate clause, already considered
8.2.6.2.8(Voltage dips and interruptions)	-	0	Duplicate clause, already considered
8.2.6.3(Emission)	-	0	Duplicate clause, already considered
8.3(Physical dimensions)	-	0	Duplicate clause, already considered
8.4(Shock and vibration and special environmental conditions)	-	0	Duplicate clause, already considered
9.2(Compliance with constructional requirements)	-	0	Duplicate clause, already considered
9.2.2.1(Test of resistance to abnormal heat and fire)	-	0	Duplicate clause, already considered
9.2.2.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	0	Duplicate clause, already considered
9.3.3.4(Dielectric properties)	-	0	Duplicate clause, already considered
9.3.3.4.5(Impulse withstand voltage test)	-	0	Duplicate clause, already considered
9.3.3.5(Making and breaking capacities)	-	0	Duplicate clause, already considered
9.6(Verification of the electromagnetic compatibility)	-	0	Duplicate clause, already considered
B.9.1.2.3(Cable tests)	-	0	Duplicate clause, already considered
B.9.1.2.4(Change of temperature test)	-	0	Duplicate clause, already considered
B.9.1.2.5(Impact test)	-	0	Duplicate clause, already considered
B.9.1.2.6(Damp heat, cyclic test)	-	0	Duplicate clause, already considered
B.9.1.2.7(Dielectric test after stresses)	-	0	Duplicate clause, already considered
C.9.1.2(Pull test)	-	0	Duplicate clause, already considered
C.9.1.3(Torque test)	-	0	Duplicate clause, already considered
C.9.1.4(Push test)	-	0	Duplicate clause, already considered
C.9.1.5(Bend test)	-	0	Duplicate clause, already considered
9.3.4(Performance under short-circuit current conditions)	-	0	Duplicate clause, already considered
9.4(Testing of operating distances)	-	0	Duplicate clause, already considered
9.5(Testing for the frequency of operating cycles)	-	0	Duplicate clause, already considered
8.1.10(Degree of protection)	-	0	Duplicate clause, already considered
9.3.3.2(Operating limits)	-	0	Duplicate clause, already considered
9.3.3.3(Temperature-rise)	-	15000	For 1 sample
5.1(General)	-	0	-
5.2(Operating conditions)	-	0	-
6.2(Marking)	-	0	-
5.3(Rated and limiting values for the proximity switch and switching element(s))	-	0	-
6.4(Environmental information)	-	0	-
7(Normal service, mounting and transport conditions)	-	0	-
8(Constructional and performance requirements)	-	0	-
8.1.1.2(Glow-wire testing)	-	0	-
8.1.1.3(Test based on flammability categor)	-	0	-
8.1.2(Current-carrying parts and their connections)	-	0	-
8.1.3(Clearances and creepage distances)	-	0	-
8.1.7.1(Constructional requirements)	-	0	-
8.1.9(Provisions for protective earthing)	-	0	-
8.1.10(Degree of protection)	-	0	-
8.1.11(Requirements for proximity switches with integrally connected cables)	-	0	-
8.1.15(Protection against artificial optical radiation)	-	0	-
8.2(Performance requirements)	-	0	-
8.2.2(Temperature-rise)	-	0	-
8.2.3(Dielectric properties)	-	0	-
8.2.3.2(Impulse withstand voltage)	-	0	-
8.2.4(Ability to make and break under normal load and abnormal load conditions)	-	0	-
8.2.5(Conditional short-circuit current)	-	0	-
8.2.6(Electromagnetic compatibility (EMC))	-	0	-
8.2.6.2(Immunity)	-	0	-
8.2.6.2.2(Electrostatic discharges)	-	0	-
8.2.6.2.3(Radiated radio-frequency electromagnetic fields)	-	0	-
8.2.6.2.4(Electrical fast transients/bursts)	-	0	-
8.2.6.2.5(Surges)	-	0	-
8.2.6.2.6(Conducted disturbances induced by radio-frequency fields)	-	0	-
8.2.6.2.7(Power-frequency magnetic fields)	-	0	-
8.2.6.2.8(Voltage dips and interruptions)	-	0	-
8.2.6.3(Emission)	-	0	-
8.3(Physical dimensions)	-	0	-
8.4(Shock and vibration and special environmental conditions)	-	0	-
9.2(Compliance with constructional requirements)	-	0	-
9.2.2.1(Test of resistance to abnormal heat and fire)	-	0	-
9.2.2.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	0	-
9.3.3.4(Dielectric properties)	-	0	-
9.3.3.4.5(Impulse withstand voltage test)	-	0	-
9.3.3.5(Making and breaking capacities)	-	0	-
9.6(Verification of the electromagnetic compatibility)	-	0	-
B.9.1.2.3(Cable tests)	-	0	-
B.9.1.2.4(Change of temperature test)	-	0	-
B.9.1.2.5(Impact test)	-	0	-
B.9.1.2.6(Damp heat, cyclic test)	-	0	-
B.9.1.2.7(Dielectric test after stresses)	-	0	-
C.9.1.2(Pull test)	-	0	-
C.9.1.3(Torque test)	-	0	-
C.9.1.4(Push test)	-	0	-
C.9.1.5(Bend test)	-	0	-
9.3.4(Performance under short-circuit current conditions)	-	0	-
9.4(Testing of operating distances)	-	0	-
9.5(Testing for the frequency of operating cycles)	-	0	-
8.1.10(Degree of protection)	-	0	-
9.3.3.2(Operating limits)	-	0	-
9.3.3.3(Temperature-rise)	-	0	-

12 May, 2027

-
Included w.e.f. 06.12.2024 Exclusion: 8.1.10 (Degree of protection-IP X9), Annexure E. Product rating: up to 250V AC & 300V DC; At 200mA AC & 50mA DC; Short circuit test at max. 15KA AC,

6327

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	3000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	3000	-
8(Insulation Resistance and Electric Strength)	-	6000	-
9(MECHANICAL STRENGTH)	-	4000	-
10(cap temperature)	-	8000	-
11(Resistance to Heat)	-	3000	-
12(Resistance to Flame and Ignition)	-	3000	-
13(Fault conditions)	-	4000	-
14(Creepage distance and clearances)	-	2000	-
4(General requirement and General test requirements)	-	3000	-
5(Marking)	-	3000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	3000	-
8(Strength after humidity treatment)	-	4000	-
9(Mechanical strength)	-	3000	-
10(Cap temperature rise)	-	4000	-
11(Resistance to heat)	-	4000	-
13(Fault conditions)	-	6000	-
14(Creepage distances and clearances)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	3000	-
16(Condition of compliance)	-	2000	-
17(Tests)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	2000	-
Annex B(Lamps with operating position limitations)	-	2000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	3000	-
12(Resistance to flame and ignition)	-	4000	-
5(Marking)	-	3000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	4000	-
8(Insulation Resistance and Electric Strength)	-	4000	-
9(MECHANICAL STRENGTH)	-	3000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	3000	-
13(Fault conditions)	-	4000	-
14(Creepage distance and clearances)	-	2000	-
4(General requirement and General test requirements)	-	2000	-
5(Marking)	-	3000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	3000	-
8(Strength after humidity treatment)	-	4000	-
9(Mechanical strength)	-	3000	-
10(Cap temperature rise)	-	5000	-
11(Resistance to heat)	-	2000	-
13(Fault conditions)	-	4000	-
14(Creepage distances and clearances)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	2000	-
16(Condition of compliance)	-	2000	-
17(Tests)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	2000	-
Annex B(Lamps with operating position limitations)	-	2000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	2000	-
12(Resistance to flame and ignition)	-	3000	-
5(Marking)	-	3000	-
6(Interchangeability)	-	4000	-
7(Protection against accidental contact with live parts)	-	4000	-
8(Insulation Resistance and Electric Strength)	-	5000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	4000	-
11(Resistance to Heat)	-	5000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	4000	-
14(Creepage distance and clearances)	-	4000	-
4(General requirement and General test requirements)	-	3000	-
5(Marking)	-	3000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	3000	-
8(Strength after humidity treatment)	-	5000	-
9(Mechanical strength)	-	5000	-
10(Cap temperature rise)	-	5000	-
11(Resistance to heat)	-	4000	-
13(Fault conditions)	-	4000	-
14(Creepage distances and clearances)	-	4000	-
15(Selection of lamps for tests (Sampling))	-	1000	-
16(Condition of compliance)	-	4000	-
17(Tests)	-	2000	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	1000	-
Annex B(Lamps with operating position limitations)	-	1000	-
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	1000	-
12(Resistance to flame and ignition)	-	3000	-

26 Sep, 2027

-
Included w.e.f 01.01.2025

6328

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	5000	-
4.7(Marking & instructions)	-	2000	-
5.1(Protection against shock and energy hazards)	-	5000	-
5.2(Requirement of auxiliary circuits)	-	5000	-
5.3(Protective earthing and bonding)	-	3000	-
5.4(AC and DC power isolation)	-	2000	-
5.5(Over current and earth fault condition)	-	3000	-
5.6(Safety interlocks)	-	5000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	-
6.1(Wiring, connections and supply)	-	3000	-
6.2(Connection to power)	-	3000	-
6.3(Wiring terminals for external power conductors)	-	3000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	3000	-
7.3(MECHANICAL STRENGTH)	-	5000	-
7.4(Construction details)	-	5000	-
7.5(Resistance to fire)	-	3000	-
7.6(Battery location)	-	5000	-
7.7(Temperature rise)	-	4000	-
8.1(General procision for earth leakage)	-	3000	-
8.2(Electric Strength)	-	3000	-
8.3(Abnormal operating and fault conditions)	-	5000	-
9.0(Connection to telecommunication networks)	-	3000	-

24 Sep, 2026

-
-

6329

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 14286 : Part 1 : Sec 2 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

1985000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	20000	-
Cl-11.2(Maximum power determination)	-	30000	-
Cl-11.3(Insulation tes)	-	15000	-
Cl-11.4(Measurement of temperature coefficients)	-	60000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC and NMOT)	-	30000	-
Cl-11.7(Performance at low irradiance)	-	30000	-
Cl-11.8(Outdoor exposure test)	-	30000	-
Cl-11.9(Hot-spot endurance test)	-	200000	-
Cl-11.10(UV preconditioning test)	-	150000	-
Cl-11.11(Thermal cycling test)	-	250000	-
Cl-11.12(Humidity-freeze test)	-	100000	-
Cl-11.13(Damp heat test)	-	150000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current test)	-	20000	-
Cl-11.16(Static mechanical load test)	-	40000	-
Cl-11.17(Hail test)	-	20000	-
Cl-11.18(Bypass diode testing)	-	80000	-
Cl-11.19(Stabilization)	-	300000	-
5(Marking and documentation)	-	5000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	120000	-
11.21(Potential induced degradation test (MQT 21))	-	300000	-
11.22(Bending test (MQT 22))	-	20000	-

20 Jun, 2028

-
Included w.e.f.08.11.2024

6330

BIS, Eastern Regional Laboratory (ERL)

None

IS 6719 (1972)

Solid Pvc Soles And Heels

For all

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.6.1 (Hardness )	-
3.6 (i) (Relative density )	-
3.6 (v) (Volatility, percent by means )	-
Table 1 (Flexing resistance) (Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-
Table 1 (Abrasion resistance) (Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-
Cl. 6.4 (Measurement of thickness)	-
3.6 (iv) (Tear Strength a) Force Part b) Back Part )	-
Cl. 3.1,3.2,3.3,3.4,3.5 (Material)	-
3.6 (iii) (Elongation at break, percent )	-
3.6 (ii) (Tensile Strength )	-
6 ,6.1,6.2,6.3 (Test Method)	-
Cl. 3.1,3.2,3.3,3.4,3.5 (Material)	-
3.6 (vi) (Lead (as Pb) ppm)	-
Table 1 Cl. 3.6, Sl No (iii) (Volatility, Percent by mass)	-
Table 1 Cl. 3.6, Sl No (iv) ("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-
Table 1 Cl. 3.6, Sl No (iv) ("Lead (as Pb), for other sized shoes, ppm ")	-

-
Mech- Complete Chem - Complete

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number