BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6361

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

E250 ,275,300,350,410,450,550,600,650

13875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7(Freedom from Defect)	-	600	-
Cl 15(Length, Width & Thickness)	-	1900	-
Cl 18(Weight)	-	600	-
Cl 10.3(UTM)	-	1200	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1200	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	875	-
Cl 11.3(Press)	-	1200	-
Clause 12(Impact Test)	-	1900	-
20(MARKING)	-	600	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	5000	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	5000	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	5000	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	5000	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	5000	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	5000	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	5000	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	5000	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	5000	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Clause 8, Table 1, Note 2(Aluminium)	-	5000	-
Clause 8, Table 1, Note 5(Niobium)	-	5000	-
Clause 8, Table 1, Note 5(Titanium)	-	5000	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	5000	-
Clause 8, Table 1, Note 6(Boron)	-	5000	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	5000	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Camber)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Channel Section: Depth)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	1900	Total charge for Dimension Rs 1900/-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	1900	Total charge for Dimension Rs 1900/-
15(Sectional Area)	-	1900	Total charge for Dimension Rs 1900/-
15(Dimension -D)	-	1900	Total charge for Dimension Rs 1900/-
15(Dimension -B)	-	1900	Total charge for Dimension Rs 1900/-
15(Thickness - t)	-	1900	Total charge for Dimension Rs 1900/-
15(Thickness - T)	-	1900	Total charge for Dimension Rs 1900/-
15(Radius R1)	-	1900	Total charge for Dimension Rs 1900/-
15(Radius R2)	-	1900	Total charge for Dimension Rs 1900/-
15(Flange Slope)	-	1900	Total charge for Dimension Rs 1900/-
15(Ovality)	-	1900	Total charge for Dimension Rs 1900/-

-
Y groove crackability test (Cl.13), Other test (NDT, metallurgical tests) (Cl.14).

6362

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 415, Fe 415D, Fe 415S; Fe 500, Fe 500D, Fe 500S;

23213 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
5.7(Pull-out test - IS:2770(P1))	-	10000	-
Cl 7.2(Weight)	-	600	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Clause 9.4(Rebend Test)	-	1800	-
Cl. 9.3, Table 4(Bend Test )	-	1400	-
Cl. 8.1 Table 3(TS/YS ratio)	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Cl. 8.1 Table 3(Yield Stress (YS))	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Cl. 8.1 Table 3(Maximum Extension)	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	5000	-
4.1(Sulphur and phosphorous)	-	5000	-
4.1(CE)	-	5000	-
4.1( Nitrogen%)	-	5000	-
4.1(Ni)	-	5000	-
4.1(Mo)	-	5000	-
4.1(Cr)	-	5000	-
4.1( Ti)	-	5000	-
4.1(V)	-	5000	-
4.1( Nb)	-	5000	-
4.1( Aluminium %)	-	5000	-
4.1( Copper %)	-	5000	-
4.1(Silicon %)	-	5000	-
4.1(Sulphur %)	-	5000	-
4.1(Phosphorus %)	-	5000	-
4.1(Manganese %)	-	5000	-
4.1(Carbon %)	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	5000	-
4.2(Niobium (Nb))	-	5000	-
4.2(Boron (B))	-	5000	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	5000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	5000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	5000	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1600	Test charge for Cl. 9.2, 9.3 & 9.4, Table 3, Table 4 Tensile strength , Elongation % Rs. 1600
Cl 9.3(Load In One Direction)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	0	-

-
-

6363

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

Size- 50,65,80,100, 125,150, 200,250,300,350,400, 450,

5300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Manufacture Dimensions Table 2 )	-	1300	-
6.9(Manufacture )	-	900	-
8.2(Hydrostatic Body Test )	-	2500	-
8.3(Hydrostatic Seat Test)	-	2500	-

-
Excl: Cl 8.2 (Hydrostatic body test) and Cl 8.3 (Hydrostatic seat test). Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises

6364

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Upto 1400 mm Sweep Size

15200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Rating)	-	100	.
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	100	.
8.1,a(Marking )	-	100	.
8.1,b(Marking )	-	100	.
8.1,c(Marking )	-	100	.
8.1,d(Marking )	-	100	.
8.1,e(Marking )	-	100	.
8.1,f(Marking )	-	100	.
8.1,g(Marking )	-	100	.
8.2(Marking )	-	100	.
8.4(Marking )	-	100	.
10.1(Speed Regulators)	-	500	.
10.2(Speed Regulators)	-	500	.
10.3(Speed Regulators)	-	500	.
10.4(Speed Regulators)	-	500	.
10.5(Speed Regulators)	-	500	.
10.6(Speed Regulators)	-	500	.
10.7(Speed Regulators)	-	500	.
10.8(Speed Regulators)	-	500	.
8.3,a(Marking )	-	100	.
8.3,b(Marking )	-	100	.
8.3,c(Marking )	-	100	.
8.3,d(Marking )	-	100	.
8.3,e(Marking )	-	100	.
11.1(Starting)	-	200	.
11.2(Starting)	-	200	.
12(Interchangeability)	-	500	.
13(Silent Operation)	-	500	.
14.4(Measurement of Speed of the Fan )	-	500	.
14.5(Measurement of Power factor and Power Input)	-	500	.
14.3 & Table 1(Test for Air Performance)	-	1500	.
17(Test for Harmonic Distortion)	-	200	.
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	500	.
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	500	.
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	500	.
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	500	.
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	500	.
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	.
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	.
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	.
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	500	.
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	500	.
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	200	.
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	200	.
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	Not Applicable
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	.
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	.
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	.
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	900	.
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	900	.
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	900	.
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	900	.
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	900	.
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	900	.
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	200	.
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	200	.
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	200	.
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	200	.
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	200	.
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	200	.
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	200	.
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	200	.
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	.
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	.
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	.
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	.
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	500	.
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	200	.
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	200	.
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	200	.
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	.
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	200	.
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	200	.
16(Endurance Test)	-	1000	.
16(Endurance Test)	-	1000	.
16(Endurance Test)	-	1000	.
16(Endurance Test)	-	1000	.
16(Endurance Test)	-	1000	.
14.3 & Table 1(Test for Air Performance)	-	1500	.
17(Test for Harmonic Distortion)	-	200	.

-
Exclusion: Cl 9 (Overvoltage protection of transformers and associated circuits), Cl 17 (Test for harmonic distortion)

6365

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

Nominal Dia. 50 - 1200 mm

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1(Manufacture - Bodies and Bonnets)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.2.2(Manufacture - Bodies and Bonnets)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.2.3(Manufacture)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.4.1(Wedges)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.4.2(Wedge Faces)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.7.2(Stem and Wedge Nuts)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.7.3(Stem and Wedge Nuts)	-	900	Cl. 7.2.1 + 7.2.2 + 7.2.3 + 7.4.1 + 7.4.2 + 7.7.2 + 7.7.3 + 7.7.4
7.2.4(Manufacture)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.7.1 Table 2,3(Dimension of Stem and Wedge Nuts)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.7.1 Table 2,4(Dimension of Stem and Wedge Nuts)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.7.1 Table 2,5(Dimension of Stem and Wedge Nuts)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.9(Height of Valve)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.11(Hand Wheel)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.12(Valve Caps)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.13 Table 2, 3(Stuffing Box )	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
7.14(By Pass Arrangements)	-	1300	Cl.7.2.4 + 7.4 + 7.7.1 + 7.9 + 7.11 + 7.12 + 7.13 + 7.14
10.1 Annex B-1(Hydraulic Test)	-	3800	Cl. 10.1
10.1 Annex B-2(Hydraulic Test)	-	3800	Cl. 10.1
10.2(Flaw Detection Test for Stems)	-	1900	Total charge for as per Cl. 10.2.1 Flaw Detection Rs. 1300/- Total charge for as per Cl. 11 Marking Rs. 600/-
Cl.6, Table-1(CARBON)	-	5000	Total Charges for Chemical composition Rs. 5000/-
Cl.6, Table-1(SULPHUR)	-	5000	-
Cl.6, Table-1(PHOSPHURS)	-	5000	-
Cl.6, Table-1(MANGANESE)	-	5000	-
Cl.6, Table-1(NITROGEN)	-	5000	-
Cl.6, Table-1(SILICON)	-	5000	-
Cl.6, Table-1(ALUMINIUM)	-	5000	-
Cl.6, Table-1(CHROMIUM)	-	5000	-
Cl.6, Table-1(NIOBIUM)	-	5000	-
Cl.6, Table-1(NICKEL)	-	5000	-
Cl.6, Table-1(VANADIUM)	-	5000	-
Cl.6, Table-1(TITANIUM)	-	5000	-
Cl.6, Table-1(MOLYBDENUM)	-	5000	-
Cl.6, Table-1(ZINC)	-	5000	-
Cl.6, Table-1(CADMIUM)	-	5000	-
Cl.6, Table-1(IRON)	-	5000	-
Cl.6, Table-1(TIN)	-	5000	-
Cl.6, Table-1(COPPER)	-	5000	-
Cl.6, Table-1(THALLIUM)	-	5000	-
Cl.6, Table-1(INDIUM)	-	5000	-
Cl.6, Table-1(TOTAL IMPURITIES)	-	5000	-
Cl.6, Table-1(CARBON)	-	5000	-

-
Excl: Cl 10.1 Annex B1 , Annex B2 (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

6366

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

Designation : Light, Medium, Heavy, Extra Heavy

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Covers and Frames)	-	600	Cl. 5.1.1 + Cl. 5.1.2 + Cl. 5.2
5.1.2(Covers and Frames)	-	600	Cl. 5.1.1 + Cl. 5.1.2 + Cl. 5.2
5.2(Key Holes and Keys)	-	600	Visual as per Cl. 5.1.1 + Cl. 5.1.2 + Cl. 5.2
5.2 and Fig.1 (Key Holes and Keys)	-	600	Visual as per Cl. 5.1.1 + Cl. 5.1.2 + Cl. 5.2
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
10 and Table 3(LOAD TEST)	-	2500	-
8(COATING - At 0˚C)	-	2000	Cl. 8 (COATING - At 0˚C & at 63˚C)
8(COATING - At 63˚C)	-	2000	Cl. 8 (COATING - At 0˚C & at 63˚C)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	1900	Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)
5.2 and Fig.1 (Key Holes and Keys)	-	600	Dimensions as per Cl. 7 & Table 2 and Fig. 3 to 9 and Cl. 5.2 & Fig. 1 (Key Holes & Keys)

-
-

6367

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

Type1 and Type2

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
7.1(Construction)	-	1900	Total charge for Dimension Rs 1900/-
7.2(Construction)	-	1900	Total charge for Dimension Rs 1900/-
7.3(Construction)	-	1900	Total charge for Dimension Rs 1900/-
7.4(Construction)	-	1900	Total charge for Dimension Rs 1900/-
7.5(Construction)	-	1900	Total charge for Dimension Rs 1900/-
7.6(Closures)	-	1900	Total charge for Dimension Rs 1900/-
8.1(Finish)	-	600	-
9.1(Leakage at air pressure )	-	1300	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	1300	-
6(Material)	-	5000	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 2(Type 2 D(h3: 4 min))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 2(Type 2 D(D1: 571.5 ± 2))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 2(Type 2 C( D1: 571.5 ± 2))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 1(Type 1 D(h3: 4 min))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 1(Type 1 C(h3: 4 min))	-	1900	Total charge for Dimension Rs 1900/-
5, Fig 1(Type 1 C( D1: 571.5 ± 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
Dimensions (Type 2 D Drums Figure 2)(D3 Diameter over chime 585 Max)	-	1900	Total charge for Dimension Rs 1900/-

-
-

6368

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Body and ends)	-	1500	Cl. (5.1 + 5.2 + 6.2 + 6.3 + 6.4) = Rs. 1500
5.2(Closures)	-	1500	Cl. (5.1 + 5.2 + 6.2 + 6.3 + 6.4) = Rs. 1500
6.2(Construction)	-	1500	Cl. (5.1 + 5.2 + 6.2 + 6.3 + 6.4) = Rs. 1500
6.3(Construction)	-	1500	Cl. (5.1 + 5.2 + 6.2 + 6.3 + 6.4) = Rs. 1500
6.4(Construction)	-	1500	Cl. (5.1 + 5.2 + 6.2 + 6.3 + 6.4) = Rs. 1500
7.1(Finish)	-	600	Cl. (7.1 + 7.2) = Rs. 600
7.2(Finish)	-	600	Cl. (7.1 + 7.2) = Rs. 600
8(Air Pressure Test)	-	1900	-

-
-

6369

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 13997 (2014)

Drums, large open top - Specification (First Revision)

Type Grade A & B

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, Table 1(Dimensions-D2)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-D3)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-D4)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-H1)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-H5)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-h2)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-h3)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-h4)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
5, Table 1(Dimensions-p1)	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
6.2(The nominal thickness of steel sheets for body and ends )	-	1900	Figure 1 & 2 Total Dimension Charge Cl. (5 + 6) = Rs. 1900
7.2( CONSTRUCTION)	-	600	Cl. (7.2 + 7.4 + 7.6) + Rs. 600
7.4( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums)	-	600	Cl. (7.2 + 7.4 + 7.6) + Rs. 600
7.6( CONSTRUCTION)	-	600	Cl. (7.2 + 7.4 + 7.6) + Rs. 600
8.1(FINISH )	-	600	Cl. (8.1 + 8.2) + Rs. 600
8.2(FINISH )	-	600	Cl. (8.1 + 8.2) + Rs. 600
9(leakage test)	-	1300	Cl. 9 & 9.1 = Rs. 1300

-
-

6370

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 17632 (2022)

General Purpose Chairs and Stools - Specification

77500 View breakup
-

Clause No.	Exclusion	Remark
CLAUSE 5(DIMENSIONS)	-	-
CLAUSE 6(SURFACE PERFORMANCE)	-	-
CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance)	-	-
CLAUSE 7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	-
CLAUSE 7.2.2(Rearwards Overbalancing)	-	-
CLAUSE 7.2.3(Sideways Overbalancing for Chairs with Arms)	-	-
CLAUSE 7.2.4(Sideways Overbalancing for Chairs with Arms)	-	-
CLAUSE 7.3.1.1(Seat static load test)	-	-
CLAUSE 7.3.1.2(Back static load test)	-	-
CLAUSE 7.3.1.3(Armrests/Wings sideways static load test)	-	-
CLAUSE 7.3.1.4(Arm downwards static load test)	-	-
CLAUSE 7.3.1.5(Leg forward static load test)	-	-
CLAUSE 7.3.1.6(Leg sideways static load test)	-	-
CLAUSE 7.3.1.7(Diagonal base load test)	-	-
CLAUSE 7.3.1.8(Foot rest static-load test)	-	-
CLAUSE 7.3.2.1(Seat impact test)	-	-
CLAUSE 7.3.2.2(Back impact test)	-	-
CLAUSE 7.3.2.3(Arm impact test)	-	-
CLAUSE 7.3.2.4(Drop test)	-	-
CLAUSE 7.4.1(Seat Fatigue Test)	-	-
CLAUSE 7.4.2(Back Fatigue Test)	-	-
CLAUSE 7.4.3(Arm Rest Durability Test)	-	-
Cl - 5(DIMENSIONS)	-	-
Cl-6.1 (a)(Resistance to mechanical damage)	-	-
Cl-6.1 (b)(Pencil hardness)	-	-
Cl-6.1 (c)(Resistance to wet heat)	-	-
Cl-6.1 (d)(Resistance to dry heat)	-	-
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	-
Cl-6.1 (f)(Resistance to marking by cold oils and fats)	-	-
Cl-6.1 (g)(Adhesive performance)	-	-
Cl-6.2 (a) 1(Breaking load)	-	-
Cl-6.2 (a) 2(Elongation at break)	-	-
Cl-6.2 (a) 3(Tear strength)	-	-
Cl-6.2 (a) 4(Colour fastness to light)	-	-
Cl-6.2 (a) 5(Colour fastness to rubbing)	-	-
Cl-6.2 (a) 6(Colour fastness to perspiration)	-	-
Cl-6.2 (a) 7(Colour fastness to water)	-	-
Cl-6.2 (a) 8(Pilling resistance)	-	-
Cl-6.2 (a) 9(Coating adhesion strength)	-	-
Cl-6.2 (a) 10(Seam slippage)	-	-
Cl-6.2 (a) 11(Resistance to damage by flexing)	-	-
Cl-6.2 (a) 12(Abrasion resistance)	-	-
Cl-6.2 (a) 13(Bursting strength)	-	-
Cl-6.2 (a) 14(Resistance to cold)	-	-
Cl-6.2 (b) 1(Tear strength)	-	-
Cl-6.2 (b) 2(Flexing endurance)	-	-
Cl-6.2 (b) 3(Finish adhesion)	-	-
Cl-6.2 (b) 4(Colour fastness to artificial light)	-	-
Cl-6.2 (b) 5(Colour fastness to rubbing)	-	-
Cl-6.2 (b) 6(Colour fastness to water spotting)	-	-
Cl-6.2 (b) 7(Water vapour permeability)	-	-
Cl-6.2 (b) 8(Colour fastness to water)	-	-
Cl-7.2.1(Forwards Overbalancing and Sideways Overbalancing for Chairs without Arms)	-	-
Cl-7.2.2(Rearwards Overbalancing)	-	-
Cl-7.2.3(Sideways Overbalancing for Chairs with Arms)	-	-
Cl-7.2.4(Stools/ Poufs (All Directions))	-	-
Cl-7.3.1(Static Load Test)	-	-
Cl-7.3.2(Impact Test)	-	-
Cl-7.4.1(Seat Fatigue Test)	-	-
Cl-7.4.2(Back Fatigue Test)	-	-
Cl-7.4.3(Arm Rest Durability)	-	-
Cl-9(Marking)	-	-
7.1(General test conditions)	-	-

25 Feb, 2027

-
Included w.e.f 04.06.2025

6371

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

Grade LTB -1 LTB -2 LTB -3 LTB -4 LTB -5 LTB -6

8750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table 1.(CHEMlCAL COMPOSITION)	-	5000	Cl. 3.1 Table 1
4.1, Table 2(Elongation)	-	1200	Cl. 4.1 (Tensile Test) = Rs. 1200
4.1, Table 2(0.2% Proof stress)	-	1563	Cl. 4.1 (Tensile Test) = Rs. 1200
4.1, Table 2(Tensile strength)	-	1200	Cl. 4.1 (Tensile Test) = Rs. 1200
6(FREEDOM FROM DEFECTS)	-	1000	Cl. 6 (6.1 + 6.2) = Rs. 625
6.1(Freedom from defects-Ingots)	-	600	Cl. 6 (6.1 + 6.2) = Rs. 600
6.2(Freedom from defects-Castings)	-	600	Cl. 6 (6.1 + 6.2) = Rs. 600
7.1(Mass)	-	599.99	-
7.2(Dimension)	-	1250	-
8(Marking)	-	600	-

-
-

6372

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 5414 (1995)

Gaskets and packings - Gland packing jute and hemp - Specification (First Revision)

Grade I, II & III

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Thickness)	-	1900	Visual & Dimension Cl. 4 & 7 - Rs. 1900
4.5(Weight per metre)	-	400	-
5(Workmanship)	-	600	-
4.2(Lubricant Content -A-1 of IS 5414)	-	1000	-
4.3(Graphite or Mica Content - A-2 of IS 5414)	-	1000	-

-
-

6373

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 5290 (1993)

Landing valves - Specification (Third Revision)

Type - A and Type - B

43300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 (a) fig-1, type A(Types AND DIMENSIONS)	-	4400	Total charge for Dimension and Marking Rs. 4400/-
6, 6.1(Finish)	-	600	-
7, 7.1(7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-	2000	Test charge for Water Tightness as per Cl. 7.1
7, 7.2(hydrostatics pressure tests)	-	2500	-
7, 7.3(Flow test, pressure 7 kgf/cm2)	-	3800	-
5, 5.1 (b) fig-2, type B(Types AND DIMENSIONS)	-	4400	Total charge for Dimension and Marking Rs. 4400/-
4.4(Marking)	-	4400	Total charge for Dimension and Marking Rs. 4400/-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1981(Tin)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1982(Zinc)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1983(Lead)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1984(Nickel)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1985(Aluminium)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1986(Silicon)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1987(Antimony)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1988(Iron)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1989(Total of all impurities(excluding Nickel))	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1990(copper)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(copper)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Si)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Mg)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Fe)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Mn)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Ni)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Zn)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Pb)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Sn)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Ti)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975(Al)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(C)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(Si)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(Mn)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(P)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(S)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(Cr)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(Ni)	-	5000	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999(Fe)	-	5000	-
Cl. 4.1.1, For Zinc-aluminium alloy(Cu)	-	5000	-
Cl. 4.1.1, For Zinc-aluminium alloy(Al)	-	5000	-
Cl. 4.1.1, For Zinc-aluminium alloy(Mg)	-	5000	-
Cl. 4.1.1, For Zinc-aluminium alloy(Zn)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(C)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(Si)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(Mn)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(Ni)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(Cr)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(Mo)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(S)	-	5000	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972.(P)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Copper plus Incidental Ni)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Sn)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Pb)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Fe)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Mn)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Al)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Sb)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Total others elements)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1(Zn)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Copper plus Incidental Ni)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Sn)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Pb)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Fe)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Mn)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Al)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Sb)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Total others elements)	-	5000	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 2(Zn)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(Cu)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(Pb)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(Fe)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(Total Others impurities excluding Fe)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(zn)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 1(Sb)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 2(Cu)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 2(Pb)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 2(Fe)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 2(Total Others impurities excluding Fe)	-	5000	-
Cl. 4.2 referes to IS 319: 1979. For grade 2(Zn)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (C)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (Si)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (Mn)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (Ni)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (Cr)	-	5000	-
Cl. 4.2 referes to IS 6603 : 1972. for Designatton 04Cr17Ni12MO2 (Mo)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400N(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400N(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(C)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(Si)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Mn)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(Ni)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(Cr)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(Mo)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(Cu)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 200-400W(V)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450N(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450N(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(C)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Si)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(S)	-	5000	-
5.2.1(Types AND DIMENSIONS)	-	4400	Total charges for Dimension & Marking Rs. 4400.00-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Ni)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Cr)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Mo)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(Cu)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 230-450W(V)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520N(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520N(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(C)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Si)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Mn)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Ni)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Cr)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Mo)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(Cu)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 280-520W(V)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570N(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570N(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(C)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Si)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Mn)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(P)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(S)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Ni)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Cr)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Mo)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(Cu)	-	5000	-
Cl. 4.3 referes to IS 1030 : 1989( but current 1998) for grade 340-570W(V)	-	5000	-
Cl. 4.3 referes to IS 4687 : 1980 (Currently 1995). as per cl 3.1.1.1 of IS 4687(Loss on drying)	-	5000	Total charge for Clause No. 4.4 Gland packing (IS 4687) Loss on Drying & Loss on Ignition Rs. 2000/- Gland packing (IS 4687) Lubricant Content Rs 1000/- Gland packing (IS 4687) Graphite Content Rs. 1000/- Rubber (IS 937) Ageing Test 1000/-
Cl. 4.3 referes to IS 4687 : 1980 (Currently 1995). as per cl 3.1.1.1 of IS 4687(Loss on ignition)	-	2000	Total charge for Clause No. 4.4 Gland packing (IS 4687) Loss on Drying & Loss on Ignition Rs. 2000
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 1(Sn)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 1(P)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 1(Pb)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 1(Other impurities)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 2(Cu)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 2(Sn)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 2(P)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 2(Pb)	-	5000	-
Cl. 4.5 referes to IS 7608 : 1987. as per cl 6.1 of IS 7608 For grade 2(Other impurities)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr13(Al)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X12Cr13(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X20Cr13(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X30Cr13(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr18Ni11(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr18Ni10(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X07Cr18Ni09(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X04Cr17Ni12Mo2(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(C)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X02Cr17Ni12Mo2(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(Si)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(Mn)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(Ni)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(Cr)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(S)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(P)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.2 , Table1 of IS 6528. For Designation X10Cr17Mn6Ni4N(N)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Ferritic & Martensitic Steel(Mo)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Ferritic & Martensitic Steel(Cu)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel without Specified Mo(Ti)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel without Specified Mo(Nb)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel without Specified Mo(Mo)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel without Specified Mo(Cu)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel Specified Mo(Ti)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel Specified Mo(Nb)	-	5000	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel Specified Mo(Cu)	-	5000	-
6, 6.2(Finish)	-	1000	Test charge for Colour test as per Clause No. 6.2

-
-

6374

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 937 (1981)

Specification for Washers For Water Fittings For Fire Fighting Purposes

All

14474 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Acid & Alkali Resistant Test)	-	0	-
2.1(Elongation at Break before & after Ageing)	-	4987	Charge for Tensile & Elongation Test before & after Ageing
2.1(Hardness of Rubber before & after Ageing)	-	4987	Charge for Hardness Test before & after Ageing
4.1(Size & Dimension)	-	1300	-
5.1(Workmanship and Finish)	-	600	-
6.1(Marking)	-	600	-
2.1()	-	2000	-

-
-

6375

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	-
6(Interchangeability)	-	1000	-
7(Protection against accidental contact with live parts)	-	1000	-
8(Insulation Resistance and Electric Strength)	-	2000	-
9(MECHANICAL STRENGTH)	-	1000	-
10(cap temperature)	-	1000	-
11(Resistance to Heat)	-	2500	-
12(Resistance to Flame and Ignition)	-	2500	-
13(Fault conditions)	-	1000	-
14(Creepage distance and clearances)	-	1000	-

-
-

6376

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

All

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	600	-
Cl. 10.1 (a)(Macro Examination)	-	600	-
Clause 10.2(Bend)	-	1200	-
Cl. 10.3(Camber)	-	600	-
Cl 11(Length, Width & Thickness)	-	1300	-
Clause 6.1(IS 2830 : 2012)	-	5000.00	Each individual element @ Rs. 875.00
6.1(Carbon %)	-	875.00	-
6.1(Carbon %)	-	875.00	-
6.1(Manganese %)	-	875.00	-
6.1(Phosphorus %)	-	875.00	-
6.1(Sulphur %)	-	875.00	-
6.1(Silicon %)	-	875.00	-
6.1( Copper %)	-	875.00	-
6.1( Aluminium %)	-	875.00	-
6.1( Nb)	-	875.00	-
6.1(V)	-	875.00	-
6.1( Ti)	-	875.00	-
6.1(Cr)	-	875.00	-
6.1(Mo)	-	875.00	-
6.1(Ni)	-	875.00	-
6.1(Nitrogen%)	-	875.00	-
Clause 9(Freedom from Defect)	-	600	-
10.1 (b)(Sulphur print)	-	0	-

-
-

6377

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions, IS 8144)	-	1000	.
6.1(Terminals, IS 8144)	-	500	.
6.2(Terminals, IS 8144)	-	500	.
8.2(Marking, IS 8144)	-	500	.
9.4(Initial Life Test, IS 8144)	-	2500	.
9.5(Delayed Life Test, IS 8144)	-	2500	.
9.6(Leakage Test, IS 8144)	-	1500	.
9.7(Delayed life test under dry heat conditions, IS 8144)	-	4000	.

-
-

6378

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

All

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1,7.2,7.3 Table 1(Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
7.1,7.2,7.3 Table 1(Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	875.00	Test Charge for Clause 7.1 (Table - 1) - Rs. 5000/- Each individual element @ Rs. 875/-
6(Freedom from defects)	-	600	-
13(Corrosion Resistance- IS 10461(Part1))	-	1000	-
9(Hardness)	-	1300	-
10(Dimensional Tolerances)	-	1300	-
14(Marking)	-	600	-

-
-

6379

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Nominal Dia 80-2000 MM

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	2500	Test Charge Rs. 1300/- for Hardness Test only as per Cl. 10.2 Test Charge Rs. 1200/- for Tensile Test only as per Cl. 10.1.5
Cl 11(Hydrostatic Test)	-	3800	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	6800	Test Charge Rs. 4400/- for Dimension as per Cl. 13 only + Test Charge Rs. 900/- for Ovality Cl. 15.3 & Rs. 900/- for Straightness Cl. 15.6; and Rs. 600 for Visual Cl. 7.2

-
-

6380

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 14257 (2019)

Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

660000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	5000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	5000	-
9.3.2(Dimensions and Layout)	-	5000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	250000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	100000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	100000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	100000	-
9.3.16(Strength of Terminal Test)	-	100000	-
9.3.17(Robustness to Fastening Test)	-	100000	-
9.3.18(Test For Dry-Charged Battery)	-	100000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	10000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	150000	-
8(MARKING)	-	5000	-
5(Rating)	-	5000	-
6(Capacities, Dimensions, Mass & Layout)	-	150000	-
8(Marking)	-	5000	-
9.3.1(Physical Examination)	-	10000	-
9.3.2(Dimensions and Layout)	-	10000	-
9.3.3(Marking)	-	5000	-
9.3.4(Capacity (5h Rate) Test)	-	150000	-
9.3.5(High Rate Discharge Test)	-	100000	-
9.3.6(Cold Cranking Performance Test (CCA))	-	100000	-
9.3.7(Reserve Capacity Test)	-	100000	-
9.3.8(Charge acceptance test)	-	100000	-
9.3.9(Water Consumption Test)	-	50000	-
9.3.10(Charge Retention Test)	-	100000	-
9.3.11(Light Load Endurance (LLE) Test)	-	80000	-
9.3.12(Life Cycle Test)	-	350000	-
9.3.13(Overcharge Endurance Test)	-	100000	-
9.3.14(Electrolyte Retention Test)	-	100000	-
9.3.15(Vibration Resistance Test)	-	85000	-
9.3.16(Strength of Terminal Test)	-	80000	-
9.3.17(Robustness to Fastening Test)	-	80000	-
9.3.18(Test For Dry-Charged Battery)	-	50000	-
4, Table no. 1(Direct-Current Potentiometers Third Revision)	-	5000	-
5(RATING)	-	5000	-
6, Table no. 2(CAPACITIES, DIMENSIONS, MASS AND LAYOUT)	-	5000	-
7(CHARGING)	-	5000	-
8(MARKING)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

6381

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	10000	-
8(MARKING AND PACKING)	-	10000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	150000	-
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	50000	-
5(MATERIALS )	-	5000	-
6(CONSTRUCTIONAL REQUIREMENTS)	-	5000	-
7(CAPACITY AND DIMENSIONS)	-	5000	-
8(MARKING AND PACKING)	-	5000	-
10(GENERAL REQUIREMENTS FOR TESTS)	-	5000	-
11(TESTS)	-	50000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

6382

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

Lamp Rating : Upto 25 W, 40 W, 60 W, 100 W & 200 W

69375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
7.2(Lamp Dimensions, IS 418:2004)	-	1000	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.1(Wattage, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.1(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
8.2.2(Luminous Flux Initial, IS 418)	-	2500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
9(Lumen Maintenance, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.1(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
10.2(Life Test Requirements, IS 418)	-	8500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-
6(Marking, IS 418)	-	500	Total charge for GLS lamp testing as per IS-418 & IS 15518(Part 1) Safety i) upto 25W Total Rs.30,000/- ii) upto 40W Total Rs.37,500/- iii) upto 60W Total Rs. 46,875/- iv) upto 100W Total Rs.69,375/- v) upto 200W Total Rs. 1,25,000/-

-
-

6383

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

218000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Endurance Life Cycle Test)	-	50000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	5000	-
12.8(Test for Vent Seal Operation)	-	5000	-
12.7 & Annex B(Test on Separators)	-	50000	-
12.6(Test for Retention of Charge)	-	50000	-
12.5(Watt Hour Efficiency)	-	50000	-
12.4(Ampere Hour Efficiency)	-	50000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	10000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	49999.98	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	5000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	10000	-
12.1(Endurance Life Cycle Test)	-	150000	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	100000	-
12.8(Test for Vent Seal Operation)	-	10000	-
12.7 & Annex B(Test on Separators)	-	10000	-
12.6(Test for Retention of Charge)	-	100000	-
12.5(Watt Hour Efficiency)	-	100000	-
12.4(Ampere Hour Efficiency)	-	100000	-
12.3(Capacity Test at Other Discharge Rates)	-	100000	-
12.2(Test for C 1 Capacity)	-	100000	-
12.1(Test for C 10 Capacity)	-	100000	-
9(Temperature for Tests)	-	50000	-
8(Markings on Cell)	-	5000	-
7.5(Information to be Furnished by the Battery Supplier)	-	5000	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	5000	-
7.3(Standard Cell Capacities)	-	5000	-
7.2(Designation of Cells)	-	5000	-
7.1(Rating )	-	5000	-
4(MATERIAL AND CONSTRUCTION)	-	5000	-
5(FLAME ARRESTOR)	-	5000	-
6(CHARGERS)	-	5000	-
7(RATING AND DESIGNATION)	-	5000	-
8(MARKINGS ON CELL)	-	5000	-
9(TEMPERATURE FOR TESTS)	-	50000	-
10(CLASSIFICATION OF TESTS)	-	5000	-
11(ACCEPTANCE TESTS)	-	100000	-
12(TESTS PROCEDURES)	-	5000	-

14 Nov, 2027

-
Included w.e.f 05.05.2025

6384

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

All

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Material)	-	5000	-
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 1))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 1 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	Total charge for Cl. 7 Construction is Rs. 600/-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1300	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	1300	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-
5(Dimensions (Type 2 D Drums Figure 2))	-	1900	Total charge for Dimension Rs 1900/-

-
-

6385

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1537 (1976)

Specification for vertically cast iron pressure pipes for water, gas and sewage (First Revision)

Size-Nominal Diameter 80- 1500

11300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 to 10.6(Coating )	-	2000	-
3.1 , 6 of IS 210( The composition of cast iron shall be left to the discretion of the manufacturer)	-	600	-
4.1(Tensile Strength)	-	2500	Cl 4.1 + 4.2
4.2(Hardness test)	-	2500	Cl 4.1 + 4.2
6.1(Hydrostatic test)	-	2500	-
7.1 & Table 2(DE)	-	3100	Total Total charge for Dimension as per Cl 7 Rs. 3100/-
7.1 & Table 2(DI)	-	3100	-
7.1 & Table 2(P)	-	3100	-
7.1 & Table 2(g)	-	3100	-
7.1 & Table 2(h)	-	3100	-
7.1 & Table 2(DC)	-	3100	-
7.1 & Table 2(c)	-	3100	-
7.1 & Table 2(f)	-	3100	-
7.1 & Table 3(DI)	-	3100	-
7.1 & Table 3(P)	-	3100	-
7.1 & Table 3(g)	-	3100	-
7.1 & Table 3(h)	-	3100	-
7.1 & Table 4(D)	-	3100	-
7.1 & Table 4(a)	-	3100	-
7.1 & Table 4(b)	-	3100	-
7.1 & Table 4(s)	-	3100	-
7.1 & Table 4(r)	-	3100	-
7.1 & Table 5(D)	-	3100	-
7.1 & Table 5(C)	-	3100	-
7.1 & Table 5(Holes Number)	-	3100	-
7.1 & Table 5(Holes Diameter)	-	3100	-
7.1 & Table 5(Diameter of Bolts)	-	3100	-
7.1 & Table 6 to 8(DE)	-	3100	-
7.1 & Table 6 to 8(t)	-	3100	-
7.1 & Table 6 to 8(Mass of one meter barrel (Approx))	-	3100	-
7.1 & Table 6 to 8(Socket mass (Approx))	-	3100	-
7.1 & Table 6 to 8(Total mass for one working length in meter)	-	3100	-
8.4(Permissible deviation from a straight line)	-	3100	-
9.1,Table 9(DE)	-	3100	-
9.1,Table 9(e)	-	3100	-
9.1,Table 9(Flange, Mass of one meter (Approx))	-	3100	-
9.1,Table 9(Mass of one flange (Approx))	-	3100	-
9.1,Table 9(Working Length)	-	3100	-

-
Cl 6.1 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

6386

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

All size as per IS

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1.1(Visual Inspection Test)	-	2500	-
6.1.1.2(Macro Examination)	-	1400	-
6.1.1.3(Micro Examination)	-	1000	-
5(Material-Rolled Steel Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Coupling Section)	-	1900	Total Charge for Dimension Test Rs. 1900/-
5(Material-Glass Panels)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1(Frames)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.1.1.4(Fillet Weld Test)	-	1000	-
6.2(Side Hung Shutter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter- Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2(Side Hung Shutter-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel )	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Material of handel plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.2 & 6.2.2.1(Handle and Handle Plate-Height of handle plate)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Material)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Thickness)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-H)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-J)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-K)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-L)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.2.3(Peg Stay - Dimensions-M)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Thickness of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Pin diameter)	-	1900	Total Charge for Dimension Test Rs. 1900/-
6.3(Top Hung Ventilator-Width of hinge)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.1(Position of Holes)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Position of Fixing Screws)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-A)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-B)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-C)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-D)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-E)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-F)	-	1900	Total Charge for Dimension Test Rs. 1900/-
7.2 Table 2(Lugs-G)	-	1900	Total Charge for Dimension Test Rs. 1900/-

-
-

6387

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 1785 : Part 2 (1983)

Specification for plain hard drawn steel wire for prestressed concrete: Part 2 as - Drawn wire (First Revision)

All

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(PHOSPHORUS)	-	5000	-
3.1.1(SULPHUR)	-	5000	-
Clause 3.4(Surface Finish)	-	1000	-
Cl 5.1(Diameter)	-	1300	-
Cl 6.1(Tensile Test On UTM)	-	1200	-
Cl 6.2(Tensile Test On UTM)	-	1200	-
Cl. 7.4(0.2 % Proof Stress )	-	1563	-
Cl. 7.5(Ductility/ Reverse Bend Test)	-	1600	-

-
-

6388

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 6701 (1985)

Specification for tungsten filament miscellaneous electric lamps (First Revision)

Upto 15W

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3 of IS 6701:1985(REQUIREMENTS FOR MECHANICAL AND PHYSICAL CHARACTERISTICS)	-	6500	-
Cl 5 of IS 6701:1985(MARKING)	-	500	-
6.2.1(Wattage)	-	2500	-
6.2.1(Lumens)	-	2500	-
6.2.2(Average Life)	-	3000	-

-
-

6389

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 4038 (1986)

Foot Valves For Water Works Purposes

Size- 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Coating)	-	5000	-
4.1(MANUFACTURE-Type)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.2(MANUFACTURE)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.3(MANUFACTURE- Housings)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4(MANUFACTURE- Flanges)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Rhickness of flange)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-C)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-A)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-d)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.4.2-Table 2(MANUFACTURE- Flanges-DIMENSIONS AND DRILLING OF FLANGES-Dia of bolt)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed-ends Polygon side)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5(MANUFACTURE- Screwed Ends-screwed)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-L)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.1-Table 3(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-H)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-Nominal size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.5.2-Table 4(MANUFACTURE- Screwed Ends-screwed-DIMENSIONS OF SCREWED-END FOOT VALVES-D)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers )	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6(MANUFACTURE- Strainers -Thickness)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Nominal Size)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -Maximum dia of Hole(Ciecular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.6-Table 5(MANUFACTURE- Strainers -DIMENSIONS OF STRAINER HOLES -MAXIMUM VALUE FOR THE Small dimension of the hole(Non-circular))	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
4.7(MANUFACTURE-Bolts and Nuts-)	-	1900	Total charge for Visual & Dimension is Rs, 1900/-
6.1.1(Seat Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-
6.1.2(Housing Test)	-	2500	Total charge for Hydraulic Test is Rs, 2500/-

-
Cl 6.1.2 Housing test (Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises)

6390

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

All

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Manufacture)	-	600	-
3.3(Manufacture)	-	600	-
3.4(Manufacture)	-	600	-
6.1(Hydrostatic Test)	-	1900	-
7.1(Sizes and Mass)	-	2300	-
7.2(Sizes and Mass)	-	2300	-
7.3(Sizes and Mass)	-	2900	Cl. 7.0, 7.1, 7.2, 7.3, 8 Dimensional Verification 2300.00 Cl. 7.3, 8 Weight Measurement 600.00
7.4(Sizes and Mass Dimensions of Flange)	-	0	-
5.1(Tensile Test)	-	0	-

-
Hydrostatic test upto 300mm. Above 300mm test can be carried at unit premises

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number