BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6421

TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI

7103506

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	500	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value

31 Dec, 2026

-
Included.w.e.f.22.01.2025 Exclusion Cl. No. 10.4 (Non-Destructive Testing) (Optional test)

6422

Samridhi Test House Pvt. Ltd.

8184706

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	2000	-
5(Construction)	-	2000	-
6.3(Cooling Capacity Test)	-	5000	-
6.4(Maximum Operating Condition Test)	-	5000	-
6.5(Pull Down Test)	-	10000	-
9(Maximum Power Consumption Test)	-	15000	-
10(Annual Energy Consumption Test)	-	10000	-
11(Storage Capacity Test)	-	7000	-
13(Functional Test)	-	15000	-
14 a)(Protection against electric shock)	-	2000	-
14 b)(High voltage (electric strength) test)	-	2000	-
14 c)(Leakage current tests)	-	2000	-
14 d)(Provision for earthing)	-	2000	-

09 Apr, 2028

-
Included w.e.f 21.05.2025

6423

BIS, Eastern Regional Laboratory (ERL)

None

IS 1855 (2022)

Stranded steel wire ropes for winding and man - Riding haulages in mines - Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1 and Table 1 of IS 1835 (Carbon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Sulphur- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Phosphorous- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Manganese- IRelevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Silicon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Chromium-Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Copper- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Nickel- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Clause 4 (Rope size and tolerance)	-
Clause 6.4 (Lay)	-
Clause 7 (Galvanizing)	-
Clause 9 (Freedom from defects)	-

-
Mech: Declarations required - Nominal dia, Type of core, Rope grade

6424

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

Industrial and protective rubber knee and ankle boots

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	200	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	200	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	200	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	600	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	1000	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	600	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	3000	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	700	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	200	-
6, 6.1(Packing)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	0	-
6.2(Packing)	-	0	-

26 Jul, 2027

-
Included w.e.f 09.04.2025

6425

Maarc Labs Private Limited, Pune

7119116

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	307.7	-
Cl-5.2.2(Coliform)	-	307.7	-
Cl-5.2.3(Staphylococcus aureus)	-	307.7	-
Cl-5.2.3(Faecal streptococci)	-	307.7	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	307.7	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	307.7	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	307.7	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	307.7	-
Cl-5.2.7(Yeast and mould)	-	307.7	-
Cl-5.2.8(Salmonella)	-	307.7	-
Cl-5.2.8(shigella)	-	307.7	-
Cl-5.2.9(Vibrio cholera)	-	307.7	-
Cl-5.2.9(V.parahaemolyticus)	-	307.7	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (x)(Uranium)	-	800	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	100	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	100	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	100	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	1000	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	100	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	500	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	100	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
5.4/Annex D/i(P,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDD)	-	129	-
5.4/Annex D/i(P,P-DDE)	-	129	-
5.4/Annex D/i(O,P-DDE)	-	129	-
5.4/Annex D/i(P,P-DDD)	-	129	-
5.4/Annex D/ii(Lindane)	-	129	-
5.4/Annex D/iii(d-HCH)	-	129	-
5.4/Annex D/iii(a-HCH)	-	129	-
5.4/Annex D/iii(β- HCH)	-	129	-
5.4/Annex D/iv(b-Endosulfan)	-	129	-
5.4/Annex D/iv(Endosulfan sulfate)	-	129	-
5.4/Annex D/iv(a-Endosulfan)	-	129	-
5.4/Annex D/v(Monochrotophos)	-	129	-
5.4/Annex D/vi(Ethion)	-	129	-
5.4/Annex D/vii(Chlorpyrifos)	-	129	-
5.4/Annex D/viii(Phorate)	-	129	-
5.4/Annex D/viii(Phorate sulphoxide)	-	129	-
5.4/Annex D/viii(Phorate sulfone)	-	129	-
5.4/Annex D/ix(2,4 –D)	-	129	-
5.4/Annex D/x(Butachlor)	-	129	-
5.4/Annex D/xi(Isoproturon)	-	129	-
5.4/Annex D/xii(Alachlor)	-	129	-
5.4/Annex D/xiii(Atrazine)	-	129	-
5.4/Annex D/xiv(Methyl parathion)	-	129	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	129	-
5.4/Annex D/xv(Malathion)	-	129	-
5.4/Annex D/xxviii(Malaoxon)	-	129	-
5.4/Annex D/xvi(Dieldrin)	-	129	-
5.4/Annex D/xvi(Aldrin)	-	129	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	900	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	900	-
Cl-5.4 (ii)(Total pesticide residue)	-	130	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	129	-
5.4 i)(Dieldrin)	-	129	-
5.4 i)(Aldrin)	-	129	-
5.4 i)(Malathion)	-	129	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	129	-
5.4 i)(Methyl Paraoxon)	-	129	-
5.4 i)(Methyl Parathion)	-	129	-
5.4 i)(Atrazine)	-	129	-
5.4 i)(Alachlor)	-	129	-
5.4 i)(Isoproturon)	-	129	-
5.4 i)(Butachlor)	-	129	-
5.4 i)(2,4-D)	-	129	-
5.4 i)(Phorate sulphone)	-	129	-
5.4 i)(Phorate sulphoxide)	-	129	-
5.4 i)(Phorate)	-	129	-
5.4 i)(Chlorpyrifos)	-	129	-
5.4 i)(Ethion)	-	129	-
5.4 i)(Monocrotophos)	-	129	-
5.4 i)(Endosulfan Sulphate)	-	129	-
5.4 i)(beta-Endosulfan)	-	129	-
5.4 i)(alpha-Endosulfan)	-	129	-
5.4 i)(Delta-HCH)	-	129	-
5.4 i)(beta-HCH)	-	129	-
5.4 i)(alpha-HCH)	-	129	-
5.4 i)(Gamma-HCH (Lindane))	-	129	-
5.4 i)(p,p DDD)	-	129	-
5.4 i)(o,p DDD)	-	129	-
5.4 i)(p,p DDE)	-	129	-
5.4, i)(o,p DDE)	-	129	-
5.4 i)(p,p DDT)	-	129	-
5.4 i)(o,p DDT)	-	129	-
Table 3, x)(Uranium)	-	800	-
5.3(Appearance)	-	100	-
Cl-5.1(General Requirements)	-	100	-

31 Dec, 2026

-
Included w.e.f.18.11.2024 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

6426

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

13000 View breakup
-

Clause No.	Exclusion	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-

26 Sep, 2027

-
Included w.e.f.05.11.2024

6427

BIS, Eastern Regional Laboratory (ERL)

None

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

For all class, design and size

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.3.6, Table no 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
Cl 5.3.6, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl 5.3.6, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.6, Table no1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl 5.3.6, Table no 1 of IS 17011 (vii) (Formaldehyde)	-
Cl 5.3.6, Table no 1 of IS 17011 (x) (pH)	-
Cl 5.3.6, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl 5.3.6, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl 5.2 (Design)	-
Cl 5.2.2, Table 4 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.7 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.5 (Flexing resistance)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2, Table 14 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1, Table 15 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except water resistance test (trough test), metatarsal protection. Quantity:- 6 Pairs shoes + 2 Toe caps(if metallic) + 5 Pairs Toe caps (if non -metallic)+ 1 slab of outsole (Size 200x200 mm of thickness 2.0+/-0.2 mm) for tear strength + 1 slab (size 200 x 200 mm of thickness 3.0+/- 0.2 mm) for Hydrolysis + Raw material + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test. Chem - Complete, Material declaration required for Innocuousness test.

6428

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated ( Heavy Duty) Electric Cables

22500 View breakup
For BIS samples: Testing charges shall not exceed 1.5 times BIS Testing charges. For other: a) Single core unsheathe cable =Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR cable = Rs. 11000/- d) Extra charges for FR LSH cable = Rs 14000/- e) Extra charges for armouring cable =Rs. 4000/- f) Extra charges for mining cable =Rs 1200/- g) separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(INSULATION : Thickness of Insulation)	-	75	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.5.1(ARMOURING : Resistance)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.1.2(Armouring: Coverage )	-	75	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	78	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	78	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	75	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	81	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	81	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	81	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	81	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	81	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2670	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2670	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2670	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 d)4)(Hot deformation : Insulation )	-	90	-
15.1 d)4)(Hot deformation : Sheath )	-	90	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2670	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2670	-
15.1 d)6)(Heat shock test- Insulation )	-	90	-
15.1 d)6)(Heat shock test- sheath )	-	90	-
15.1 d)7)(Thermal stability- insulation )	-	81	-
15.1 d)7)(Thermal stability- Sheath )	-	81	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	156	-
15.1 e)(Insulation resistance test : IR Constant )	-	156	-
15.1 f)(High voltage test ( water immersion test ))	-	870	-
15.1 g)(High voltage test at room temperature)	-	870	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	177	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	177	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	177	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	177	-
16.4(Flammability Test)	-	75	-
16.5(Oxygen Index Test)	-	582	-
16.6(Flame Retardance Test on Single Cables)	-	75	-
16.7(Flame Retardance Test on Bunched Cables)	-	131	-
16.1(Temperature Index)	-	480	-
16.9(Test for Halogen Acid Gas Evolution)	-	183	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	870	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	870	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-

03 Jan, 2027

-
-

6429

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC INSULATED UNSHEATHED AND SHEATHED CABLE

14500 View breakup
a) Single core unsheathed Cable=Rs. 4000/- b) Single core sheathed cable = Rs. 5000/- c) Extra charges for outdoor use cable =Rs 3000/- d) Extra charges for low temp. use cable = Rs. 1200/- e) Extra charges for FR Cable = Rs. 8000/- f) Extra charges for FR-LSH cable = Rs. 10000/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Rs. 900/- for copper purity test only [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	4223	-
10.4(Flammability test- Unaffected portion)	-	125	-
10.4(Flammability test-Burning after flame removal)	-	125	-
table 1 e) 3) (IR constant- max. Temp)	-	176	-
table 1 e) 3) (IR constant- Room temp )	-	176	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	176	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	176	-
10.2(HV (room temperature))	-	870	-
10.1(HV (water immersion))	-	870	-
10.8(Smoke density rating)	-	131	-
10.6(Halogen evolution)	-	181	-
10.7(Temperature index)	-	630	-
10.5(Oxygen index)	-	585	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	102	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	102	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	102	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	102	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	81	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	81	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	90	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	90	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	90	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	90	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	90	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	90	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2670	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2670	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2670	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2670	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	81	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	81	-
8.3(Thickness of Sheath)	-	75	-
5.3(Thickness of Insulation)	-	75	-
10.11(Per sulphate test (for tinned Cu cable only))	-	125	-
4.2(Conductor resistance test)	-	81	-
4.1(Wrapping test (for Al))	-	75	-
4.1(Tensile test (for Al)- After Stranding)	-	81	-
4.1(Tensile test (for Al)-Before Stranding)	-	81	-
4.1(Annealing test (for copper))	-	81	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	75	-
Table 4(Copper purity test)	-	900	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2670	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	81	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	81	-
Table 1 iii) c) 3)(Elongation variation)	-	2670	-
Table 1 iii) c) 3)(TS variation)	-	81	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	2670	-
9(Overall dimensions)	-	75	-
7(BINDER TAPE)	-	75	-
6(FILLER)	-	75	-

03 Jan, 2027

-
-

6430

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

PLAIN CONDUITS OF INSULATING METERIALS

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 10000/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	75	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	75	-
7.4(Unifomity of The wall Thickness)	-	75	-
7.2(Minimum inside diameter of conduit)	-	75	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	75	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	78	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	78	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	75	-
10(Resistance to Heat -Ball presure test)	-	75	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	75	-
9.3(Compression Test at Full force applied (On load))	-	78	-
7.3(Length of conduit)	-	75	-
6.1(Marking)	-	75	-

03 Jan, 2027

-
-

6431

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE Insulated, PVC Sheathed Armored cable

22500 View breakup
a) Single core unsheathed Cable=Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR Cable = Rs. 11000/- d) Extra charges for FR-LSH cable = Rs. 14000/- c) Extra charges for armouring cable =Rs 4000/- d) Extra charges for mining cable = Rs. 1200/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Thickness of Insulation - Average)	-	75	-
9.3(Thickness of Insulation - Minimum)	-	75	-
13.1.2(Armouring: Coverage )	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-
13.5(Armouring : Resistance Test)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	78	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	128	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	125	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	78	-
14.3(Thickness of outer sheath - AVERAGE)	-	75	-
14.3(Thickness of outer sheath - minimum)	-	75	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) iii)(Wrapping test (for aluminium))	-	75	-
15.1 a) iv)(Resistance test - Main conductor)	-	81	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	81	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2670	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	90	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	90	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2670	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	870	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	81	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2670	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 e) v) (Sheath : Hot deformation)	-	2670	-
15.1 e) vi) (Sheath : Heat shock test)	-	81	-
15.1 e) vii) (Sheath : Thermalstability)	-	156	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1017	-
16.2(HIGH VOLTAGE TEST )	-	75	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	582	-
16.9(Oxygen Index Test)	-	75	-
16.14(Temperature Index)	-	78	-
16.1(Flame Retardance Test on Single Cables)	-	131	-
16.11(Flame Retardance Test on Bunched Cables)	-	183	-
16.13(Test for Halogen Acid Gas Evolution)	-	480	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
3(CONDUCTOR: MATERIALS)	-	78	-
12.1 & 12.2(Inner sheath : Application)	-	78	-
14.1(Outer Sheath : Application)	-	78	-
14.2(Colour of outer sheath)	-	81	-

03 Jan, 2027

-
-

6432

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminum Alloy Stranded conductor

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	300	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	300	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	300	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	300	-
12.3 Table 1(Elongation Test- Before Stranding)	-	300	-
12.3 Table 1(Elongation Test- After Stranding)	-	300	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 18 wire layer)	-	300	-
9.2(Lay Ratio 24 wire layer)	-	300	-
6.1(Freedom from Defects)	-	300	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	300	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	300	-
9.1(Stranding)	-	300	-
9.3(Direction of Lay)	-	300	-
9.4(Multiple layers of wires)	-	300	-

03 Jan, 2027

-
-

6433

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

AERTAL BUNCHED CABLES

9900 View breakup
a) For one core = Rs 4400/- b) Extra Charges for each additional core = Rs. 1500/- c) Bare messenger conductor =Rs. 1000/- d) Separate wire before stranding =Rs 500/- e) Insulated messenger conductor =Rs. 1500/- f) Optional test (if Required)= Rs 800/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2( Thickness of insulation)	-	75	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	78	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	75	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	78	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	78	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	78	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2670	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2670	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	2670	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	2670	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	165	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	5475	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	153	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	153	-
10.1 g)(High voltage test - IS10810:Part 45)	-	153	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	75	-

03 Jan, 2027

-
Only XLPE insulation

6434

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for overhead Transmission purpose

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	300	-
12.3, Table-1(Breaking load before stranding)	-	300	-
12.3, Table-1(Breaking load after stranding)	-	300	-
12.4(Wrapping test)	-	300	-
12.5, Table 1(Resistance test)	-	300	-
12.6, Table 3(Measurement of lay ratio)	-	300	-
6(Freedom from defects)	-	300	-
7.2.1(Sizes)	-	300	-
7.1.1(Nominal Sizes)	-	300	-
7.2.2(Resistance)	-	300	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	300	-
9.3(Stranding)	-	300	-
9.2(Lay ratio)	-	300	-
9.4(Multiple layer of wires)	-	300	-

03 Jan, 2027

-
-

6435

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductor Galvanized steel reinforced

7900 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 7900/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	303	-
13.7.2 (chem)(Mass of Zinc coating)	-	304	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	304	-
13.10 (elec)(Ultimate breaking load)	-	304	-
7(FREEDOM FROM DEFECTS)	-	304	-
9(Joint in wires)	-	304	-
14.2(a), 8.2.1(Sizes)	-	304	-
13.9 (elec)(Surface condition test)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	--

03 Jan, 2027

-
Restricted for conductor size below 100 mm2

6436

BIS, Central Laboratory (CL)

None

IS 8521 : Part 1 (2022)

Eye and Face Protection for Occupational Use Part 1 General Requirements (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.3 (Construction and adjustment)	-
Cl-7.5 (Resistance to thermal exposure)	-
Cl-7.7 (Resistance to corrosion)	-
Cl-8 (Marking of protectors)	-

-
partial facility

6437

Samridhi Test House Pvt. Ltd.

8184706

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	6600	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	9500	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	38000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	12000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	19000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	42000	-
"Cl. No.16 "(Safety Requirements)	-	42400	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Repeat Test
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Repeat Test
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Repeat Test
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Repeat Test
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Repeat Test
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Repeat Test
"Cl. No.16(a) "(Protection against acess to live parts)	-	5000	-
"Cl. No.16(b) "(Power input and current)	-	9000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	5700	-
"Cl. No.16(e) "(Moisture resistance)	-	10000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	5700	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	2800	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	2800	-
"Cl. No.20.3(c) "(c) Electric strength)	-	2800	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	2400	-
4(Classification)	-	500	-
5(Marking)	-	0	Repeat Test
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	500	-
8.2(Material and Finishes)	-	500	-
8.3(Thermal Insulation and Air Tightness)	-	500	-
8.4(Doors, Lids and Fittings)	-	500	-
8.5(Shelves and Containers)	-	500	-
8.6(Disposal of Defrost Water)	-	500	-
8.7(Refrigerating System)	-	500	-
8.8(Supply Cord)	-	500	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	0	Repeat Test
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	0	Repeat Test
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	0	Repeat Test
10(Testing the Opening force of door(s) or lid(s))	-	0	Repeat Test
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	0	Repeat Test
12(Testing the Mechanical strength of shelves and similar components)	-	0	Repeat Test
13(Water-vapour condensation test)	-	6000	-
14(Ice-making test (if applicable))	-	0	Repeat Test
15(Test for absence of odour and taste)	-	0	Repeat Test
16(a)(Protection against access to live parts)	-	0	Repeated Test
16(b)(Power input and current)	-	0	Repeated Test
16 (c(Heating)	-	0	Repeated Test
16(d)(Leakage current and electric strength at operating temperature)	-	0	Repeated Test
16(e)(Moisture resistance)	-	0	Repeated Test
16(f)(Leakage current and electric strength (high voltage after humidity))	-	0	Repeated Test
17(Packing)	-	1000	-
18(Designation)	-	1000	-
19(Instructions for Use and Maintenance)	-	4700	-
20.3 (a)(Leakage Current Test)	-	0	Repeat Test
20.3 (b)(Earth Continuity Test)	-	0	Repeat Test
20.3 (c(Electric Strength Test)	-	0	Repeat Test

09 Apr, 2028

-
Included w.e.f 21.05.2025

6438

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 7686 (2020)

Specification for 3 ( N, N-Diethyl ) Aminophenol ( First Revision )

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1(Description)	-	1000	-
Cl. 3.2(Solubility in alcohol, ether, sodium hydroxide and hydrochloric acid)	-	2000	-
Cl. 3.3, Table 1, Sr. No (i), A-2(Crystallizing point,)	-	3500	-
Cl. 3.3, Table 1, Sr. No (ii), A-3(Purity by CV)	-	3000	-
Cl. 3.3, Table 1, Sr. No (iii), B(Purity by HPLC)	-	4000	-
Cl. 3.3, Table 1, Sr. No (iv), C(Salt content as NaCl)	-	2500	-
Cl. 3.1(Description)	-	0	NA
Cl. 3.2(Solubility in alcohol, ether, sodium hydroxide and hydrochloric acid)	-	0	NA
Cl. 3.3, Table 1, Sr. No (i), A-2(Crystallizing point,)	-	0	NA
Cl. 3.3, Table 1, Sr. No (ii), A-3(Purity by CV)	-	0	NA
Cl. 3.3, Table 1, Sr. No (iii), B(Purity by HPLC)	-	0	NA
Cl. 3.3, Table 1, Sr. No (iv), C(Salt content as NaCl)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 03.03.2025

6439

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Remark
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
4.1(unit of volume)	-	-
4.2(delivery volume)	-	-
4.3(reference temperature)	-	-
5.1(Types and Classes of accuracy)	-	-
5.2(Types of single- volume pipette)	-	-
7.1(Material)	-	-
7.2(Shape)	-	-
7.3(Bulb)	-	-
7.4(Dimensions)	-	-
7.5(Top of Pipette)	-	-
7.6(Delivery Jet)	-	-
7.7(Delivery Time)	-	-
7.8(Waiting Time)	-	-
Clause- 8.0(Graduation Line)	-	-
Clause- 9.0(Setting of the Meniscus)	-	-
Clause-10.0(Marking)	-	-
Clause- 6.0(Maximum Permissible error)	-	-

26 Sep, 2027

-
Included w.e.f. 30.10.2024

6440

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Remark
3, 4(Type of Flask)	-	-
3.1, 4.1(Series of Nominal Capacity)	-	-
3.2, 4.2(Nominal Capacity )	-	-
3.3, 4.3(Material )	-	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	-
3.5.2(Neck Length)	-	-
3.5.3, 4.5.2(Dimensions of base )	-	-
3.5.4, 4.5.3(Wall thickness)	-	-
5(Marking )	-	-

26 Sep, 2027

-
Included w.e.f.05.11.2024

6441

Samridhi Test House Pvt. Ltd.

8184706

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	500	-
3.2(Harness)	-	200	-
3.3(Metal Parts)	-	2000	-
4.1(Sizes)	-	500	-
5.1(Shell)	-	100	-
5.2(Harness)	-	1000	-
5.3(Chin Strap or Nape Strap)	-	2000	-
5.4(Lamp Bracket)	-	1000	-
5.5(Cable Clip)	-	1000	-
6.1(Workmanship & Finish)	-	100	-
7.1(Mass)	-	500	-
8.1(Shock Absorption Resistance)	-	1000	-
8.2(Penetration Resistance)	-	1000	-
8.3(Flamability Resistance)	-	1000	-
8.4(Electrical Resistance)	-	1000	-
8.5(Water Absorption)	-	1000	-
8.6(Heat Resistance)	-	1000	-
3.1(Shell)	-	0	Repeated Test
3.2(Harness)	-	0	Repeated Test
3.3(Metal Parts)	-	0	Repeated Test
4.1(Sizes)	-	0	Repeated Test
5.1(Shell)	-	0	Repeated Test
5.2(Harness)	-	0	Repeated Test
5.3(Chin Strap or Nape Strap)	-	0	Repeated Test
5.4(Lamp Bracket)	-	0	Repeated Test
5.5(Cable Clip)	-	0	Repeated Test
6.1(Workmanship & Finish)	-	0	Repeated Test
7.1(Mass)	-	0	Repeated Test
8.1(Shock Absorption Resistance)	-	0	Repeated Test
8.2(Penetration Resistance)	-	0	Repeated Test
8.3(Flamability Resistance)	-	0	Repeated Test
8.4(Electrical Resistance)	-	0	Repeated Test
8.5(Water Absorption)	-	0	Repeated Test
8.6(Heat Resistance)	-	0	Repeated Test
5.2.1(Head Band)	-	1000	-
5.3.1(Chin Strap)	-	1000	-
5.3.2(Nape Strap)	-	1000	-

09 Apr, 2028

-
-

6442

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	13500	-
Table 1(Nominal Capacity)	-	13500	-
Table 1(Internal Neck Diameter)	-	13500	-
Table 1(Distance of graduation line)	-	13500	-
Table 1(Overall Height)	-	13500	-
Table 1(Bulb Diameter)	-	13500	-
Table 1(Base Diameter)	-	13500	-
Table 1(Wall Thickness)	-	13500	-
Table 1(Ground joint k4)	-	13500	-
Table 1(Ground joint k6)	-	13500	-
8.3(Shape)	-	13500	-
8.4(Neck)	-	13500	-
8.5(Stopper)	-	13500	-
8.6(Dimensions)	-	13500	-
9.0(Graduation Line)	-	13500	-
Table-2(Nominal capacity)	-	13500	-
Table-2(Internal neck diameter)	-	13500	-
Table-2(Distance of graduation line 1))	-	13500	-
Table-2(Overall height 2))	-	13500	-
Table-2(Bulb diameter)	-	13500	-
Table-2(Base diameter)	-	13500	-
Table-2(Wall thickness)	-	13500	-
Table-2(Ground joint 3) k4)	-	13500	-
Table-2(Ground joint 3) k6)	-	13500	-
12.1(Visibility of graduation line, figures and marking)	-	13500	-
12.2(Visibility of graduation line, figures and marking)	-	13500	-
Clause. 7.0(Accuracy)	-	13500	-

26 Sep, 2027

-
included w.e.f.05.11.2024

6443

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 209 (2024)

Refined Zinc - Specification (Fifth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Zinc))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Lead))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Iron))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Cadmium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Aluminium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Copper))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Tin))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Total of All Impurities))	-	1500	-
Cl 9.1(Freedom from Defect)	-	1000	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

6444

CSIR-CECRI, CSIR-Battery Performance Testing & Evalauation Centre, Karaikudi

6162524

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

417600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
4.3.7.1(Specific gravity)	-	0	-
Cl-5.4(Marking)	-	0	-

24 Sep, 2027

-
included w.e.f.17.10.2024

6445

CIPET, Madurai

6139834

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

HDPE Crates

7838 View breakup
For Others: Rs.10050/- (For BIS: Rs.6638/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	25% Discount for BIS
2.3(Shape and Dimensions)	-	500	25% Discount for BIS
2.4(Mass )	-	300	25% Discount for BIS
2.5(Appearance and Surface Finish)	-	300	25% Discount for BIS
2.6(Colour Fastness)	-	300	25% Discount for BIS
2.7(Resistance to Stress)	-	1000	25% Discount for BIS
2.8(Resistance to Applied Load)	-	1100	25% Discount for BIS
2.9(Strength)	-	1100	1200 Specimen conditioning charges 25% Discount for BIS only on testing charges
2.1(Dimensional Stability)	-	900	25% Discount for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

6446

CIPET, Madurai

6139834

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
For Others: Rs.9175/- Rs.6075/- For raw material (optional) For BIS: Rs.7431/- Rs.5181/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25 % Discount for BIS on Testing charge
4.1.b(Potyethylene - anti-oxidant)	-	2000	25 % Discount for BIS on Testing charge
4.1.c.i (Density)	-	500	Rs 625 Sample Preparation charge 25 % Discount for BIS on Testing charge
4.1.c.ii (Toluene extract - Annex A)	-	1100	25 % Discount for BIS on Testing charge
4.1.c.iii (Volatile matter - Annex B )	-	700	25 % Discount for BIS on Testing charge
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25 % Discount for BIS on Testing charge
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25 % Discount for BIS on Testing charge
7.3(Tensile Test)	-	1100	Rs 300 Sample Preparation charge 25 % Discount for BIS on Testing charge
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % Discount for BIS on Testing charge
7.3(Elongation at Break)	-	0	With Tensile strength
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	25 % Discount for BIS on Testing charge
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	Rs 300 Inclusive of all dimension
7.2(Reversion Test)	-	1100	Rs 250 Sample Preparation charge 25 % Discount for BIS on Testing charge

22 May, 2027

-
Included w.e.f. 17-02-2021

6447

CIPET, Madurai

6139834

IS 10889 (2004)

High density polyethylene films (First Revision)

5756 View breakup
For Others: Rs.7675/- Rs.3,225/- For raw material (optional) For BIS: Rs.5756/- Rs.3,044/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	1050	25 % Discount on Testing Charges for BIS
5.2(Black Compound)	-	3850	25 % Discount on Testing Charges for BIS
6.1.1(Appearance)	-	300	25 % Discount on Testing Charges for BIS
6.1.5(Melt Flow Rate)	-	1100	25 % Discount on Testing Charges for BIS
6.2.1, Table 1(Nominal Thickness)	-	250	25 % Discount on Testing Charges for BIS
6.2.2, Table 2(Nominal Width)	-	250	25 % Discount on Testing Charges for BIS
6.4.1(Tensile Strength at Break)	-	2200	1100 for Machine Direction 1100 for Transverse Direction 25 % Discount on Testing Charges for BIS
6.4.2(Elongation at Break)	-	0	As per 6.4.1
6.4.3(Impact Resistance (Falling Dart))	-	850	25 % Discount on Testing Charges for BIS
6.4.3, Table 6(Average Thickness of Film)	-	250	25 % Discount on Testing Charges for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

6448

CIPET, Madurai

6139834

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

7988 View breakup
For Others: Rs.6650/- Rs.2750/- For raw material (optional) For BIS: Rs.4988/- Rs.2063/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	1050	25% Dicount for BIS
5.1(Visual)	-	250	25% Dicount for BIS
5.2(Film form)	-	250	25% Dicount for BIS
5.3(winding)	-	250	25% Dicount for BIS
5.4(Odour)	-	250	25% Dicount for BIS
5.5(Thickness)	-	250	25% Dicount for BIS
5.6(Width)	-	250	25% Dicount for BIS
5.7(Tensile Strength)	-	1300	25% Dicount for BIS
5.8(Elongation at Break)	-	1300	25% Dicount for BIS
5.9(Dart Impact Resistance)	-	850	25% Dicount for BIS
5.10(Slip)	-	850	25% Dicount for BIS
8.1(Leak test)	-	400	25% Dicount for BIS
8.2(Drop test)	-	1100	25% Dicount for BIS
8.3(Printing Requirements)	-	500	25% Dicount for BIS
9.1(General requirements)	-	250	25% Dicount for BIS
9.2(Product Specific Requirements)	-	250	25% Dicount for BIS
10(Marking)	-	250	25% Dicount for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

6449

CIPET, Madurai

6139834

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

41325 View breakup
For Others: Rs.41,325/- (For BIS: Rs.31,306/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	5500	Sample Preparation Charges -500 ( Butt Welded sample to be submitted ) 25% Discount on the testing charges only
8.9 table-6(Elongation at Break)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.8(Tensile Strength for Butt-fusion)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.7(Density)	-	500	25% Discount on the testing charges only
8.5 (Oxidation Induction Time)	-	2200	25% Discount on the testing charges only
8.4( Melt Flow Rate)	-	1100	25% Discount on the testing charges only
8.2(Longitudinal Reversion Test)	-	700	Sample Preparation Charges - 200 25% Discount on the testing charges only
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	17400	Acceptance Test - Rs 1600 Type Test (165Hrs)- 4800 Type Test (1000Hrs) -11000 Sample Preparation Charge - 250 25% Discount on the testing charges only
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	25% Discount on the testing charges only
7.4.1.2(Ovality)	-	0	25% Discount on the testing charges only
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	750	For all dimensions measurement test charges would be - 700 25% Discount on the testing charges only
7.2(Length)	-	250	25% Discount on the testing charges only
6.2.1(6.1.1 Identification Stripes)	-	250	25% Discount on the testing charges only
6.2(Colour)	-	250	25% Discount on the testing charges only
8.6(Overall migration)	-	1700	Sample Preparation Charges - 300 25% Discount on the testing charges only
8.3(Carbon black)	-	1625	Carbon Black Content- 925 Carbon Black Dispersion - 700 25% Discount on the testing charges only
5, 5.1 table-1(MATERIALS)	-	4025	Sample Preparation Charge -625 25% Discount on the testing charges only
5.3(e)(Carbon Black Master Batch)	-	925	25% Discount on the testing charges only

22 May, 2027

-
Diameter 16mm to 200mm.

6450

CIPET, Madurai

6139834

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

woven sacks for packaging of 50 kg cement

7913 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	25% Discount for testing charge
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	25% Discount for testing charge
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	25% Discount for testing charge
4.2 (Fabric)	-	1050	25% Discount for testing charge
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	25% Discount for testing charge
4.4(Seam )	-	250	25% Discount for testing charge
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	25% Discount for testing charge
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	300	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge

22 May, 2027

-
For finished product only

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number