BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6451

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

57300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	550	GENERAL Rs. 250.00 DESIGN Rs. 300.00
Cl-4.3.1(Size)	-	200	-
Cl-4.3.2(Weight)	-	300	-
Cl-4.4(Height of Upper)	-	250	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	800	CONSTRUCTION Rs. 300 ERGONOMIC FEATURES Rs. 500
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1200	UPPER OUTSOLE BOND STRENGTH Rs. 600 INTERLAYER BOND STRENGTH Rs. 600
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	1000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	600	-
Cl-4.6.1(Material)	-	650	Thickness Rs. 250.00 Material Rs. 400.00
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	800	-
Cl-4.7.1(Material)	-	400	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1200	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	400	-
Cl-4.8.2(Abrasion Resistance)	-	500	-
Cl-4.8.3(Water Absorption and Desorption)	-	750	-
Cl-4.9.3(Abrasion Resistance)	-	500	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	650	Thickness Rs. 250.00 Material Rs. 400.00
Cl-4.11.1(Material)	-	650	MATERIAL Rs. 400 THICKNESS Rs. 250
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	750	No. of Ply Rs. 250.00 Breaking Strength Rs. 500.00
Cl-4.13.2(Thickness)	-	250	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	250	-
Cl-4.13.5(Ageing Test)	-	1000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	800	-
Cl-4.13.8(Flexing Resistance)	-	800	-
Cl-4.14(Eyelet)	-	1400	Colour Peeling Test Rs. 500.00 Material Rs. 400.00 Eyelet Pull out Test Rs. 500.00
Cl-5(Chemical Requirements)	-	30000	IS 17011
Cl-7(Marking)	-	0	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	500	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	0	REPEATED CHARGES ALREADY MENTIONED IN CL- 4.5.3 BOND STRENGTH UPPER OUTSOLE BOND STRENGTH Rs. 600 INTERLAYER BOND STRENGTH Rs. 600 TOTAL Rs. 1200.00
Cl.4.5.3.2(Interlayer bond strength)	-	0	REPEATED CHARGES ALREADY MENTIONED IN CL- 4.5.3 BOND STRENGTH UPPER OUTSOLE BOND STRENGTH Rs. 600 INTERLAYER BOND STRENGTH Rs. 600 TOTAL Rs. 1200.00
Cl-4.9.1(Material)	-	400	-
Cl-4.9.2(Water Absorption and Desorption)	-	750	-
Cl-4.13.1(Material)	-	400	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1300	CHARGES MATERIAL Rs. 400 LENGTH Rs. 150 BREAKING STRENGTH Rs. 500 TAG RETENTION Rs. 250 TOTAL Rs. 1300

20 Jan, 2028

-
-

6452

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

68500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Size and Fittings)	-	0	TESTING CHARGES with UPPER LEATHER Rs. 68,500.00 with UPPER COATED FABRIC / TEXTILE Rs. 68,500.00
Cl-5(Design)	-	0	-
Cl-6(Size and Fittings)	-	0	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	1800	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	0	REPEATED
Cl.7.1.2(Energy Absorption at Seat Region)	-	0	REPEATED
Cl.7.1.3(Complete Shoe Flexing)	-	1000	-
Cl.7.1.4(Washability)	-	500	-
Cl.7.1.5(Slip Resistance)	-	2500	-
Cl.7.1.6(Heel Drop)	-	500	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	500	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	500	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	500	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	500	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	250	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	1200	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	500	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	250	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	500	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	500	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1000	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	1000	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	2000	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	1000	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	500	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	500	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	1200	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	500	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	1000	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	500	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	500	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	750	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	1200	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	750	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	500	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	800	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	800	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	2000	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	500	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	500	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	250	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	500	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	500	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	500	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	500	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	250	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	500	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	500	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	500	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	750	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	500	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	500	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	500	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	500	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	500	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	500	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	750	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	750	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	30000	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	INNOCUOUSNESS Rs. 30,000
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	INNOCUOUSNESS Rs. 30,000
Cl-7.12.2(PVC is present in sports shoe)	-	1000	LEAD CONTENT Rs. 1000
Cl- 8.1(Marking)	-	0	VISUAL
Cl.7.7 Table-8 S.No- (iii)(Elongation at break, percent, Min)	-	0	REPEATED

20 Jan, 2028

-
-

6453

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	0	Testing Charges With Upper- Leather Rs. 68,000.00 With Upper- Coated Fabric/Textile Rs.68,000.00 VISUAL
5(DESIGN)	-	0	VISUAL
6(SIZE AND FITTINGS)	-	0	-
7.1.1(Whole Footwear)	-	200	TOE SPRING HEIGHT Rs. 200
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	600	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	600	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	600	-
7.1.5(Energy Absorption at Seat Region)	-	500	-
7.1.6(Complete Shoe Flexing)	-	1000	-
7.1.7(Washability)	-	500	-
7.1.8(Slip Resistance)	-	2500	-
7.1.9(Heel Drop)	-	500	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	500	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	500	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	500	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	500	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	500	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	250	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	800	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1200	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	500	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	250	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	500	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	500	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	500	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	2000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	1000	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	500	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	1200	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	500	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	500	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	500	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	500	-
7.4 , Table No. 5 , i)(Thickness)	-	250	-
7.4 , Table No. 5 , ii)(Flexing index)	-	500	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	500	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	375	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	375	-
7.5 , Table No. 6 , i)(Thickness)	-	250	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	1200	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	375	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	375	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	500	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	800	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	800	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	2000	-
7.6 , Table No. 7 , iv)(Tear strength)	-	500	-
7.6 , Table No. 7 , v)(Tensile strength)	-	500	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	250	-
7.6 , Table No. 7 , vii)(Compression set)	-	500	-
7.7 , Table No. 8 , i)(Compression set)	-	500	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	500	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	500	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	250	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	500	-
7.8 , Table No. 9 , ii)(Resilience)	-	500	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	500	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	500	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	500	-
7.8 , Table No. 9 , v)(Peel strength)	-	500	-
7.9 , Table No. 10 , i)(Peel strength)	-	500	-
7.9 , Table No. 10 , ii)(Shear strength)	-	500	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	500	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	500	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	500	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	500	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	500	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	500	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	500	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	750	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	30000	INNOCUOUSNESS 30000
8(MARKING AND PACKING)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	INNOCUOUSNESS Rs.30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	0	INNOCUOUSNESS Rs.30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(x)(pH)	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	INNOCUOUSNESS Rs. 30000 MENTIONED IN CLAUSE 7.12

20 Jan, 2028

-
-

6454

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

49000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	5 % DISCOUNT TO BIS Samples
Cl No.4.2(Construction)	-	0	Clause Covered in Amendment No. 1
Cl No.4.3(Whole Footwear)	-	0	Clause Covered in Amendment No. 1
4.3.1(Insole)	-	0	Clause Covered in Amendment No. 1
4.3.2(Toe spring height)	-	0	Clause Covered in Amendment No. 1
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	Clause Covered in Amendment No. 1
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	Clause Covered in Amendment No. 1
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	Clause Covered in Amendment No. 1
4.3.6(Energy Absorption at Seat Region)	-	0	Clause Covered in Amendment No. 1
4.3.7(Complete Shoe Flexing)	-	0	Clause Covered in Amendment No. 1
4.3.8(Washability)	-	0	Clause Covered in Amendment No. 1
4.3.9(Slip Resistance)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	Clause Covered in Amendment No. 1
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	Clause Covered in Amendment No. 1
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	Clause Covered in Amendment No. 1
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	Clause Covered in Amendment No. 1
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	Clause Covered in Amendment No. 1
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	Clause Covered in Amendment No. 1
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	Clause Covered in Amendment No. 1
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	Clause Covered in Amendment No. 1
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	Clause Covered in Amendment No. 1
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	Clause Covered in Amendment No. 1
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	Clause Covered in Amendment No. 1
Cl No . 5(MARKING AND PACKING)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	Clause Covered in Amendment No. 1
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	Clause Covered in Amendment No. 1
Clause 4.2 - 4.2.1(Construction)	-	0	Clause Covered in Amendment No. 1
Clause 4.2 - 4.2.2(Construction)	-	0	Clause Covered in Amendment No. 1
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	Clause Covered in Amendment No. 1
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	Clause Covered in Amendment No. 1
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	Clause Covered in Amendment No. 1
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	Clause Covered in Amendment No. 1
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 1 ii)(Tear strength)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 2 iii)(Tear strength)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	Clause Covered in Amendment No. 1
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	Clause Covered in Amendment No. 1
Clause 4.5, Table 3 i)(Tear strength)	-	0	Clause Covered in Amendment No. 1
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	Clause Covered in Amendment No. 1
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	Clause Covered in Amendment No. 1
Clause 4.6, Table 4 i)(Thickness)	-	0	Clause Covered in Amendment No. 1
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	Clause Covered in Amendment No. 1
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	Clause Covered in Amendment No. 1
Clause 4.7, Table 5 i)(Thickness)	-	0	Clause Covered in Amendment No. 1
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	Clause Covered in Amendment No. 1
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	Clause Covered in Amendment No. 1
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	Clause Covered in Amendment No. 1
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	Clause Covered in Amendment No. 1
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	Clause Covered in Amendment No. 1
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	Visual
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	200	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	600	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	500	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	800	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2000	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1000	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	500	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	250	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	500	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	500	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	500	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	500	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	250	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1000	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	500	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	375	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	375	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	250	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1200	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	375	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	375	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1000	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2000	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	500	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	500	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	500	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	500	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	500	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	500	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	750	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	500	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	500	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	Repeated
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	500	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	750	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	Clause Covered in Amendment No. 1
Cl No.4.1(Sampling and Conditioning)	-	0	REPEATED
Cl No.4.2(Construction)	-	0	REPEATED
Cl No.4.3(Whole Footwear)	-	0	REPEATED
4.3.1(Insole)	-	0	REPEATED
4.3.2(Toe spring height)	-	0	REPEATED
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	REPEATED
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	REPEATED
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	REPEATED
4.3.6(Energy Absorption at Seat Region)	-	0	REPEATED
4.3.7(Complete Shoe Flexing)	-	0	REPEATED
4.3.8(Washability)	-	0	REPEATED
4.3.9(Slip Resistance)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	REPEATED
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	REPEATED
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	0	REPEATED
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	0	REPEATED
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	REPEATED
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	0	REPEATED
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	REPEATED
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	0	REPEATED
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	REPEATED
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	REPEATED
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	0	REPEATED
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	0	REPEATED
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	REPEATED
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	0	REPEATED
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	REPEATED
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	REPEATED
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	REPEATED
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	REPEATED
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	REPEATED
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	0	REPEATED
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	0	REPEATED
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	REPEATED
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	0	REPEATED
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	0	REPEATED
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	0	REPEATED
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	0	REPEATED
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	0	REPEATED
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	0	REPEATED
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	0	REPEATED
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	REPEATED
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	0	REPEATED
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	0	REPEATED
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	0	REPEATED
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	0	REPEATED
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	0	REPEATED
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	0	REPEATED
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	0	REPEATED
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	0	REPEATED
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	0	REPEATED
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	0	REPEATED
Cl No . 5(MARKING AND PACKING)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	REPEATED
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	REPEATED
Clause 4.2 - 4.2.1(Construction)	-	0	REPEATED
Clause 4.2 - 4.2.2(Construction)	-	0	REPEATED
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	REPEATED
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	0	REPEATED
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	0	REPEATED
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	0	REPEATED
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	0	REPEATED
Clause 4.4, Table 1 ii)(Tear strength)	-	0	REPEATED
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	0	REPEATED
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	REPEATED
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	0	REPEATED
Clause 4.4, Table 2 i)(Breaking Strength)	-	0	REPEATED
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	REPEATED
Clause 4.4, Table 2 iii)(Tear strength)	-	0	REPEATED
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	0	REPEATED
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	REPEATED
Clause 4.5, Table 3 i)(Tear strength)	-	0	REPEATED
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	0	REPEATED
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	0	REPEATED
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	REPEATED
Clause 4.6, Table 4 i)(Thickness)	-	0	REPEATED
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	0	REPEATED
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	0	REPEATED
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	REPEATED
Clause 4.7, Table 5 i)(Thickness)	-	0	REPEATED
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	0	REPEATED
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	0	REPEATED
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	REPEATED
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	0	REPEATED
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	0	REPEATED
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	0	REPEATED
Clause 4.9, Table 7 ii)(Split Tear strength)	-	0	REPEATED
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	0	REPEATED
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	REPEATED
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	REPEATED
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	REPEATED
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	REPEATED
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	REPEATED
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	REPEATED
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	REPEATED
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	REPEATED
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	REPEATED
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	REPEATED
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	REPEATED
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	REPEATED
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	REPEATED
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	REPEATED
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	REPEATED
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	REPEATED
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	REPEATED
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	REPEATED
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	REPEATED
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	REPEATED
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	REPEATED
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	REPEATED
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	REPEATED
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	REPEATED
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	REPEATED
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	REPEATED
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	REPEATED
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	REPEATED
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	REPEATED
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	REPEATED
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	REPEATED
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	REPEATED
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	REPEATED
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	REPEATED
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	REPEATED
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	REPEATED
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	REPEATED
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	REPEATED
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	REPEATED
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	REPEATED
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	REPEATED
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	REPEATED
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	REPEATED
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	REPEATED
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	REPEATED
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	REPEATED
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	REPEATED
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	REPEATED
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	REPEATED
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	REPEATED
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	REPEATED
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	REPEATED
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	REPEATED
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	REPEATED
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	REPEATED
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	REPEATED
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	REPEATED
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	REPEATED
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	REPEATED
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	REPEATED
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	REPEATED

20 Jan, 2028

-
-

6455

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 17037 (2018)

Anti riot shoes - Specification

64350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	30000	-
4.16.2(Breaking load & lag retention)	-	1000	Breaking Load 500 Tag Retention 500
4.16.1(Length of laces )	-	550	Material 400 Length 150
4.15(D-ring and Hooks )	-	650	Material 400 No. of D Rings 250
4.14.10(Resistance to fuel oil)	-	600	-
4.14.9(Resistance to hot contact)	-	500	-
4.14.8(Flex resistance)	-	800	-
4.14.7(Abrasion resistance)	-	800	-
4.14.6(Tear Strength)	-	500	-
4.14.5(Ageing test)	-	1000	-
4.14.4(Hardness (IRHD))	-	250	-
4.14.3(Density )	-	300	-
4.14.2(Thickness )	-	250	-
4.14.1(Meterial)	-	400	-
4.13(Breaking Strength of thread)	-	750	Breaking Strength of Thread 500 No. of Ply 250
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	950	Material 400 Thickness 250 GSM 300
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness)	-	900	Material 400 Thickness 250 Density 250
4.10(Counter stiffener thickness)	-	250	-
4.9.3(Water absorption & desorption )	-	750	-
4.9.2(Abrasion resistance )	-	1200	-
4.9.1(Meterial)	-	400	-
4.8.3(Water absorption & desorption )	-	750	-
4.8.2(Abrasion resistance )	-	400	-
4.8.1(Meterial)	-	400	-
4.7.5(Water vapour permeability & coefficent )	-	1000	-
4.7.4(Abrasion resistance )	-	1200	-
4.7.3(Tear Strength)	-	500	-
4.7.1(Meterial)	-	400	-
4.6.4(Water penetration and water absorption)	-	800	-
4.6.3(Water vapour permeability & coefficent )	-	1000	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	650	Material 400 Thickness 250
4.5.11(Water resistance machine method)	-	0	-
4.5.11(Water Resistance Tray method )	-	500	-
4.5.11(Thickness Toe puff & counter stiffener)	-	0	.
4.5.10(Energy absorption of seat region )	-	500	-
4.5.9(Cold insulation of sole complex)	-	600	-
4.5.8(Heat insulation of sole complex)	-	500	-
4.5.7.1(Antistatic test)	-	1000	-
4.5.6.4(Compression resistance)	-	400	-
4.5.6.3(Impact resistance )	-	400	-
4.5.6.2(Internal Toe cap length)	-	150	-
4.5.6.1(General)	-	300	-
4.5.5.4(Ageing test)	-	1000	-
4.5.5.3(Nail penetraion Insert )	-	400	-
4.5.5.2(Flex resistance )	-	1000	-
4.5.5.1(Dimension)	-	250	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	600	-
4.5.3.1(Upper/outsole bond strength)	-	600	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Contruction)	-	300	-
4.4(Height of upper )	-	150	-
4.3.2(Weight)	-	300	-
4.3.1(Size)	-	1000	-
4.2(Design )	-	0	Visual
4.1(General)	-	0	Visual
4.5.3(Bond strength)	-	0	Repeated
4.9(Insocks)	-	0	-
5(Chemical Requirements)	-	0	-
6.1(Scale of Sampling)	-	0	-
6.2(Methods of Selecting Footwear)	-	0	-
6.3.1(Visual and Tactile Examination)	-	0	-
6.3.2(Dimensional Characteristics)	-	0	-
6.3.3.1(Tests for physical requirements)	-	0	-
6.3.3.2(Tests for chemical requirements)	-	0	-
7(Marking)	-	0	-
4.4, Table 2(Shoe size)	-	0	-
4.4, Table 2(Height)	-	0	-
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	0	-

20 Jan, 2028

-
-

6456

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

All

13550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3.1.2(Upper/outsole bond strength)	-	350	-
Table 1(CLASS I)	-	0	This parameter is visually checked
Table 1(CLASS II)	-	0	This parameter is visually checked
5.2.2.1(General)	-	0	This parameter is visually checked
5.2.2.2(Height of upper)	-	100	-
5.2.2.3(Seat region)	-	400	-
5.3.2.1(Construction)	-	0	-
5.3.2.2(Leakproofness)	-	400	-
5.3.2.3(Specific ergonomic features )	-	0	-
5.3.4.1(Slip resistance)	-	2400	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	1200	-
5.3.4.3(Slip resistance on steel floor with glycerine )	-	1200	-
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	2400	-
5.4.2.1(Upper)	-	100	-
5.4.2.2(Thickness )	-	100	-
5.4.2.3(Tear strenth)	-	350	-
5.4.2.4(Tensile properties)	-	350	-
5.4.2.5(Flexing resistance )	-	300	-
5.4.2.6(Water vapour permeability and coefficient )	-	800	-
5.4.2.7(pH value )	-	200	-
5.4.2.8(Hydrolysis)	-	1500	-
5.4.2.9(Chromium VI content )	-	1500	-
5.5.2.1(Tear strength )	-	350	-
5.5.2.2(Abrasion resistance )	-	1000	-
5.5.2.3(Water vapour permeability and coefficient )	-	800	-
5.5.2.4(pH value )	-	200	-
5.5.2.5(Chromium VI content )	-	1500	-
5.6(Tongue )	-	0	-
5.6.2.1(Tear strength )	-	350	-
5.6.2.2(pH value )	-	250	-
5.6.2.3(Chromium VI content )	-	1500	-
5.7.2.1(Insole and insock )	-	50	-
5.7.2.2(Insole and insock )	-	50	-
5.7.2.3(Water absorption and desorption )	-	500	-
5.7.4.1(Abrasion resistance )	-	400	-
5.7.4.2(Abrasion resistance )	-	0	-
5.7.2.5(Chromium VI content )	-	1500	-
5.8.2.1(Outsole)	-	0	-
5.8.1.1(Thickness )	-	100	-
5.8.1.2(Cleated area )	-	100	-
5.8.1.3(Cleat height)	-	100	-
5.8.2.2(Tear strength )	-	350	-
5.8.2.3(Abrasion resistance )	-	600	-
5.8.2.4(Flexing resistance )	-	600	-
5.8.2.5(Hydrolysis )	-	1500	-
5.8.2.6(Interlayer bond strength )	-	350	-
6.2.1.1(Metallic anti-penetration insert )	-	400	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	400	-
6.2.1.2(Construction)	-	0	-
6.2.1.3(Dimensions )	-	100	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	400	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	500	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	400	-
6.2.2.1(Conductive footwear)	-	1000	-
6.2.2.2(Antistatic footwear)	-	800	-
6.2.2.3(Electrically insulating footwear )	-	800	-
6.2.3.1(Heat insulation of sole complex )	-	500	-
6.2.3.2(Cold insulation of sole complex)	-	500	-
6.2.2.4(Energy absorption of seat region )	-	400	-
6.2.2.5(Water resistance )	-	300	-
6.2.2.6(Ankle protection)	-	500	-
6.2.7.1(Cut resistance foot wear)	-	0	-
6.2.7.2(Cut resistance foot wear)	-	0	-
6.2.7.3(Resistance to cutting)	-	500	-
6.2.7.4(Pentration resistance)	-	400	-
6.3.2.2(Upper- water penetration)	-	800	-
6.4.2.1(Resistance to hot contact)	-	400	-
6.4.2.2(Resistance to fuel oil)	-	300	-
7(a)(Marking)	-	0	-
7(b)(Marking)	-	0	-
7(c)(Marking)	-	0	-
7(d)(Marking)	-	0	-
7(e)(Marking)	-	0	-
7(e)(Marking)	-	0	-

20 Jan, 2028

-
-

6457

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	500	-
4,Table 1(Class I, IS 15298)	-	0	This parameter is visually checked
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	0	This parameter is visually checked
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	100	-
5.2.3, Table 10 ,Design A(Seat Region)	-	0	This parameter is visually checked
5.3.1.1(Construction)	-	0	This parameter is visually checked
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	400	-
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	400	-
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	0	This parameter is visually checked
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	100	-
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	400	-
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	500	-
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	500	-
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	400	-
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	500	-
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1200	-
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	1200	-
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	2000	-
5.4.1,Table 10(General)	-	0	This parameter is visually checked
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	100	-
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	400	-
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	400	-
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	800	-
5.4.7(Ph Value ; ISO 20344,6.9)	-	250	-
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	2000	-
5.4.9(Chromium VI content; ISO 17075)	-	1500	-
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	400	-
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	1000	-
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	800	-
5.5.4(Ph Value ; ISO 20344,6.9)	-	250	-
5.5.5(Chromium VI content; ISO 17075)	-	1500	-
5.6(Tongue - IS 15298 Part 2 )	-	0	This parameter is visually checked
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	400	-
5.6.2(Ph Value ; ISO 20344,6.9)	-	250	-
5.6.3(Chromium VI content; ISO 17075)	-	1500	-
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	100	-
5.7.2(Ph Value ; ISO 20344,6.9)	-	250	-
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	500	-
5.7.4.1(Insole ; ISO 20344,7.3 )	-	500	-
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	1000	-
5.7.5(Chromium VI content; ISO 17075)	-	1500	-
5.8.1(Design, IS 15298 Part 2 )	-	0	This parameter is visually checked
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	100	-
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	100	-
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	100	-
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	400	-
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	700	-
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	700	-
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	1500	-
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	400	-
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	400	-
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	500	-
6.2.1.2(Consruction)	-	0	This parameter is visually checked
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	100	-
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	1000	-
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	500	-
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	400	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	1000	-
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	1000	-
6.2.2.3(Electrically insulating footwear; EN 50321)	-	1000	-
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	500	-
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	500	-
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	500	-
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	300	-
6.2.6.1(Construction)	-	0	This parameter is visually checked
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	400	-
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	500	-
6.2.8.1(Design)	-	0	This parameter is visually checked
6.2.8.2(Construction)	-	0	This parameter is visually checked
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	500	-
6.2.8.4(Penetration Resistance)	-	400	-
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	800	-
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	400	-
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	400	-
4,Table 1(Class II, IS 15298)	-	0	This parameter is visually checked

20 Jan, 2028

-
-

6458

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

All

15350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3.2.3 Table-2(Impact Resistance -T- )	-	400	-
5.2.2 Table-2(Height of upper)	-	100	-
5.2.3 Table-2(Seat Region)	-	400	-
5.3.1.1 Table-2(Construction)	-	0	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	400	-
Table-2(Strength)	-	400	-
5.3.2.1 Table-2(General)	-	0	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	100	-
5.3.2.4 Table-2(Compression)	-	400	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	0	-
5.3.3 Table-2(Leak Proofness)	-	400	-
5.3.4 Table-2(Specific Ergonomic)	-	200	-
Table-2(Features)	-	0	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	1200	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	1200	-
Table-2(0.18)	-	0	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	2400	-
5.4.1 Table-2(General)	-	0	-
5.4.2 Table-2(Thickness)	-	100	-
5 4 3 Table-2(Tear Strength)	-	400	-
5.4.4 Table-2(Tensile Properties)	-	400	-
5.4.5 Table-2(Flexing Resistance)	-	500	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	800	-
5 4.7 Table-2( )	-	250	-
5 4.8 Table-2(Hydrolysis)	-	1500	-
5.4 9 Table-2(Chrome VI)	-	1500	-
5.5.1 Table-2(Tear Strength)	-	400	-
5.5.2 Table-2(Abrasion Resistance)	-	1000	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	800	-
5.5.4 Table-2(pH Value)	-	250	-
5.5.5 Table-2(Chrome VI)	-	1500	-
5.6.1 Table-2(Tear Strength)	-	400	-
5.6.2 Table-2(pH Value)	-	250	-
5.6.3 Table-2(Chromium VI)	-	1500	-
5.7.1 Table-3(Thickness)	-	100	-
5.7.2 Table-3(pH Value)	-	250	-
5.7.3 Table-3(Water Absorption &)	-	250	-
Table-3(Desorption)	-	250	-
5.7.4.1 Table-3(Insole Abrasion)	-	5000	-
5.7.4.2 Table-3(Abrasion)	-	400	-
5.7.5 Table-3(Chromium VI)	-	1500	-
5.8.1 Table-2(Design)	-	0	This parameter is visually checked
5.8.2 Table-2(Tear Strength)	-	400	-
5.8.3 Table-3(Abrasion Resistance)	-	700	-
5.8.4 Table-3(Flexing Resistance)	-	700	-
5.8.5 Table-3(Hydrolysis)	-	1500	-
5.8.6 Table-2(Interlayer BondStrength)	-	400	-
6.2.1 Table-I8(Penetration Resistance)	-	400	-
6.2.2.1 Table-18(Electrical Properties)	-	0	-
Table-18(Conductive Footwear)	-	1000	-
6.2.2.2 Table-18(Antistatic Footwear)	-	800	-
6.2.2.3 Table-18(Electrically Insulated)	-	800	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	500	-
6.2.3.2 Table-18(Cold Insulated)	-	500	-
6.2.4 Table-18(Energy Absorption of seat region)	-	400	-
6.2.5 Table-18(Water Resistance)	-	300	-
6.2.7 Table-18(Ankle Protection)	-	500	-
6.2.8 Table-18(Cut Resistance)	-	500	-
6.3 Table-18(Water Penetration & Absorption)	-	800	-
6.4.1 Table-18(Resistance to Hot Contact)	-	400	-
6.4.2 Table-18(Resistance to Fuel oil)	-	300	-

20 Jan, 2028

-
-

6459

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	350	-
4(Manufacture- IS16186)	-	0	-
4.1(Fabric)	-	0	-
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	25	-
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	100	-
4.2(Seam-IS 9113 (Cl.5.1.2))	-	100	-
4.2.i)( Type of stitches Herakle )	-	0	-
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	0	-
4.2.iii)( Stitches/dm 10 ± 1 )	-	0	-
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	25	-
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	100	-
4.3.i)( Stitches/dm 10 ± 1 )	-	0	-
4.3.ii)(Tex of jute twine )	-	50	-
4.3( 310 tex.X 2-ply )	-	0	--
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	100	-
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	0	-
4.5(Freedom from defects)	-	100	-
4.5, Annex A(GAW)	-	0	-
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	0	-
4.5, Annex A(Multiple broken weft(pick))	-	0	-
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	0	-
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	0	-
4.5, Annex A(Gap stitching-Stitching missing)	-	0	-
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	0	-
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	0	-
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	100	-
4.1 & 5.1, Table 1(Outside Length, cm )	-	100	-
4.1 & 5.1, Table 1(Outside Width, cm )	-	100	-
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	100	-
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	100	-
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	250	-
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	350	-
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	0	Repeated
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	0	Repeated
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	400	-
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	400	-

20 Jan, 2028

-
-

6460

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	100	-
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	400	-
5.3 Table 2 ii) ( Number of joined bags per)	-	0	-
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	0	-
4(MANUFACTURE)	-	250	-
4.1(Fabric)	-	0	-
4.1.1(Fabric)	-	0	-
4.2 IS 9113(Seam )	-	0	-
4.3 IS 9113(Hemming at the Mouth )	-	0	-
4.4 Annex B(Freedom from Defects)	-	0	-
4.5 IS 10146(Liner)	-	0	-
5,5.1 Table 1(SPECIFIC REQUIREMENTS)	-	0	-
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	150	-
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	150	-
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	100	-
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	250	-
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	175	-
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	175	-
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	175	-
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	175	-
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	200	-
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	200	-
5.3 (SPECIFIC REQUIREMENTS)	-	0	-
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	0	-
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	0	-
6 IS 2873(PACKING)	-	0	-
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	0	Repeated
5.3 Table 2 ii) ( Number of joined bags per)	-	0	Repeated
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	0	Repeated
4(MANUFACTURE)	-	0	Repeated
4.1(Fabric)	-	0	Repeated
4.1.1(Fabric)	-	0	Repeated
4.2 IS 9113(Seam )	-	0	Repeated
4.3 IS 9113(Hemming at the Mouth )	-	0	Repeated
4.4 Annex B(Freedom from Defects)	-	0	Repeated
4.5 IS 10146(Liner)	-	0	Repeated
5,5.1 Table 1(SPECIFIC REQUIREMENTS)	-	0	Repeated
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	0	Repeated
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	0	Repeated
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	0	Repeated
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	0	Repeated
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	0	Repeated
5.3 (SPECIFIC REQUIREMENTS)	-	0	Repeated
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	0	Repeated
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	0	Repeated
6 IS 2873(PACKING)	-	0	Repeated
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	0	Repeated
5.3 Table 2 ii) ( Number of joined bags per)	-	0	Repeated
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	0	Repeated
4(MANUFACTURE)	-	0	Repeated
4.1(Fabric)	-	0	Repeated
4.1.1(Fabric)	-	0	Repeated
4.2 IS 9113(Seam )	-	0	Repeated
4.3 IS 9113(Hemming at the Mouth )	-	0	Repeated
4.4 Annex B(Freedom from Defects)	-	0	Repeated
4.5 IS 10146(Liner)	-	0	Repeated
5,5.1 Table 1(SPECIFIC REQUIREMENTS)	-	0	Repeated
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	0	Repeated
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	0	Repeated
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	0	Repeated
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	0	Repeated
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	0	Repeated
5.3 (SPECIFIC REQUIREMENTS)	-	0	Repeated
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	0	Repeated
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	0	Repeated
6 IS 2873(PACKING)	-	0	Repeated
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	0	Repeated
5.3 Table 2 ii) ( Number of joined bags per)	-	0	Repeated
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	0	Repeated
4(MANUFACTURE)	-	0	Repeated
4.1(Fabric)	-	0	Repeated
4.1.1(Fabric)	-	0	Repeated
4.2 IS 9113(Seam )	-	0	Repeated
4.3 IS 9113(Hemming at the Mouth )	-	0	Repeated
4.4 Annex B(Freedom from Defects)	-	0	Repeated
4.5 IS 10146(Liner)	-	0	Repeated
5,5.1 Table 1(SPECIFIC REQUIREMENTS)	-	0	Repeated
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	0	Repeated
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	0	Repeated
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	0	Repeated
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	0	Repeated
5,5.1,5.2Table 1,v) a)Cl.8.6.2 of IS 9113Table A / B / C(Average breaking load of sacking (ravelled strip method, 10.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2Table 1,v) b)Cl.8.6.2 of IS 9113Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 10.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	0	Repeated
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	0	Repeated
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	0	Repeated
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	0	Repeated
5.3 (SPECIFIC REQUIREMENTS)	-	0	Repeated
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	0	Repeated
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	0	Repeated
6 IS 2873(PACKING)	-	0	Repeated

20 Jan, 2028

-
-

6461

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 1943 (1995)

Textiles – A-twill jute bags (second revision)

3050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1,5.1,Table 1(Average Breaking Strength in N -IS 1969 N)	-	350	-
4.1(Sacking- IS 1943)	-	200	-
4.1(Sacking- IS 1943)	-	0	Repeated
4.2(Seam -- IS 1943)	-	100	-
4.2(Seam -- IS 1943)	-	0	Repeated
4.2(Seam -- IS 1943)	-	0	Repeated
4.2(Seam -- IS 570)	-	0	Repeated
4.3(Safety Stitches -IS 1943)	-	100	-
4.3(Safety Stitches -IS 1943)	-	0	Repeated
4.3(Safety Stitches -IS 570)	-	0	Repeated
4.4(Hemming at the mouth IS 9113)	-	100	-
4.4( IS 570)	-	0	-
4.5(Joined bag - IS 9113)	-	200	-
4.6(Freedom from defects- IS 1943)	-	100	-
4.1,5.1,Table 1(Dimension;Outside Length-IS 9113)	-	150	-
4.1,5.1,Table 1(Dimension;Outside width-IS 9113)	-	150	-
4.1,5.1,Table 1(Ends /dm -IS 1963)	-	100	-
4.1,5.1,Table 1(Picks/dm -IS 1963)	-	100	-
4.1,5.1,Table 1(Corrected Mass/Bag,g-IS 9113)	-	250	-
4.1,5.1,Table 1(Average breaking load of seam-IS 9030)	-	350	-
4.1,5.1,Table 1(Moisture Regain, Percent-IS 9113)	-	400	-
4.1,5.1,Table 1(Oil content, Percent-IS 2969)	-	400	-

20 Jan, 2028

-
-

6462

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 177 (1989)

Cotton drills – Specification (fourth revision)

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2(Cloth)	-	50	-
3 / 3.1(MANUFACTURE / Yarn)	-	100	-
3.2(Cloth)	-	50	-
3.2.1(Cloth)	-	50	-
3.2.3(Cloth)	-	50	-
4/ 4.1 table-1(REQUIREMENTS)	-	0	-
4/ 4.2 table-2(REQUIREMENTS)	-	3050	-
3 / 3.1(MANUFACTURE / Yarn)	-	0	Repeated
3.2(Cloth)	-	0	Repeated
3.2.1(Cloth)	-	0	Repeated
3.2.2(Cloth)	-	0	Repeated
3.2.3(Cloth)	-	0	Repeated
4/ 4.1 table-1(REQUIREMENTS)	-	0	Repeated
4/ 4.2 table-2(REQUIREMENTS)	-	0	Repeated
3 / 3.1(MANUFACTURE / Yarn)	-	0	Repeated
3.2(Cloth)	-	0	Repeated
3.2.1(Cloth)	-	0	Repeated
3.2.2(Cloth)	-	0	Repeated
3.2.3(Cloth)	-	0	Repeated
4/ 4.1 table-1(REQUIREMENTS)	-	0	Repeated
4/ 4.2 table-2(REQUIREMENTS)	-	0	Repeated
4.1,Table 1(Weave)	-	100	-
4.1,Table 1(Width)	-	100	-
4.1,Table 1(Length)	-	100	-
4.1,Table 1(Breaking load ,Weft)	-	175	-
4.1,Table 1(Breaking load ,Warp)	-	175	-
4.1,Table 1(Mass)	-	250	-
4.1,Table 1(Picks/cm)	-	100	-
4.1,Table 1(Ends/cm)	-	100	-
4.1,Table 1(Count of Yarn (cotton count(tex)),Weft)	-	125	-
4.1,Table 1(Count of Yarn (cotton count(tex)),Warp)	-	125	-

20 Jan, 2028

-
-

6463

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 4605 (1981)

Specification for crepe bandage (First Revision)

3350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.6(REQUIREMENTS-Breaking Load-tested by the method given in IS : 1969-1968)	-	350	-
5/5.7(REQUIREMENTS-The loss on scouring-tested according to IS : 1383-1977+)	-	500	-
5/5.3(REQUIREMENTS-Stretchability)	-	300	-
5/5.2(REQUIREMENTS-Weight per Unit Area)	-	250	-
5/5.4(REQUIREMENTS-Recovery)	-	150	-
2/2.1(MATERIAL- as per the method given in IS : 1889 ( Part I )-1976*)	-	400	-
3/3.1(DIMENSIONS)	-	300	-
4/4.1.1(MANUFACTURE, WORKMANSHIP AND FINISH- Warp yarns- as per IS : 832-l964+)	-	125	-
4/4.1.2(MANUFACTURE, WORKMANSHIP AND FINISH- Weft yarns)	-	125	-
4/4.2(MANUFACTURE, WORKMANSHIP AND FINISH)	-	400	-
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	200	-
5/5.5(REQUIREMENTS-Chemical Neutrality-according to ' hot method' given in 6.3 of IS : 1390-1961*.)	-	250	-
5/5.7(REQUIREMENTS-The loss on scouring-tested according to IS : 1383-1977+)	-	0	Repeated
5/5.3(REQUIREMENTS-Stretchability)	-	0	Repeated
5/5.2(REQUIREMENTS-Weight per Unit Area)	-	0	Repeated
5/5.4(REQUIREMENTS-Recovery)	-	0	Repeated
5/5.6(REQUIREMENTS-Breaking Load-tested by the method given in IS : 1969-1968)	-	0	Repeated
2/2.1(MATERIAL- as per the method given in IS : 1889 ( Part I )-1976*)	-	0	Repeated
3/3.1(DIMENSIONS)	-	0	Repeated
4/4.1.1(MANUFACTURE, WORKMANSHIP AND FINISH- Warp yarns- as per IS : 832-l964+)	-	0	Repeated
4/4.1.2(MANUFACTURE, WORKMANSHIP AND FINISH- Weft yarns)	-	0	Repeated
4/4.2(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	Repeated
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	0	Repeated
5/5.5(REQUIREMENTS-Chemical Neutrality-according to ' hot method' given in 6.3 of IS : 1390-1961*.)	-	0	Repeated
5/5.7(REQUIREMENTS-The loss on scouring-tested according to IS : 1383-1977+)	-	0	Repeated
5/5.3(REQUIREMENTS-Stretchability)	-	0	Repeated
5/5.2(REQUIREMENTS-Weight per Unit Area)	-	0	Repeated
5/5.4(REQUIREMENTS-Recovery)	-	0	Repeated
5/5.6(REQUIREMENTS-Breaking Load-tested by the method given in IS : 1969-1968)	-	0	Repeated
2/2.1(MATERIAL- as per the method given in IS : 1889 ( Part I )-1976*)	-	0	Repeated
3/3.1(DIMENSIONS)	-	0	Repeated
4/4.1.1(MANUFACTURE, WORKMANSHIP AND FINISH- Warp yarns- as per IS : 832-l964+)	-	0	Repeated
4/4.1.2(MANUFACTURE, WORKMANSHIP AND FINISH- Weft yarns)	-	0	Repeated
4/4.2(MANUFACTURE, WORKMANSHIP AND FINISH)	-	0	Repeated
5/5.1(REQUIREMENTS-Threads per Stated Length)	-	0	Repeated
5/5.5(REQUIREMENTS-Chemical Neutrality-according to ' hot method' given in 6.3 of IS : 1390-1961*.)	-	0	Repeated

20 Jan, 2028

-
-

6464

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 6803 (1972)

Specification for special proofed canvas and duck

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6.2(Bundesmann water repellency test for special proofed duck-there shall be no penetration ofwater through the fabric and its inner side shall not be wetted. The water absorption shall not exceed 60 percent by mass.)	-	400	-
Cl. 3.2.2.1, Appendix A-2, IS 1039(Copper Content)	-	400	-
Cl. 3.2.2.1, Appendix A-2, IS 1040(Zinc Content)	-	400	-
3.2.8(Shrinkage-material shall not have more than 3 percent shrinkage in warp or weft direction (As per A-3))	-	200	-
Cl. 3.2.3 (pH Value)	-	250	-
Cl. 3.2.1 , Appendix A-1(Proofing Content)	-	500	-
Cl. 3.2.2.1(Resistance to Microbial Attack)	-	0	-
3.2.7.1(Colour fastness-The material when tested prescribed in IS : 2454-1967*, shall show a fastness rating of not less than 5, unless otherwise agreed to between the purchaser and the supplier.)	-	400	-
3.1(Base fabric(Refer IS 1422 for cotton duck and IS 1424 for Cotton canvas))	-	0	-
3.2.4(Pliability- Special proofed canvas on duck shall be pliable when the sample is kept for 2 hours at 0 degree )	-	300	-
3.2.5(Breaking strength of special proofed canvas and duck- Average(IS 1969) )	-	350	-
3.2.6.1, table 1(Waterpoofness-Pressure head test for special proofed canvas-(refer Annexure E))	-	200	-
3.2.6.3(Cone test -Form a cone by folding, pressing and creasing a 300 x 300 mm piece of special proofed canvas or duck. Suspend it by means of a metal ring and fill the cone with 400 ml of water and allowit to stand as such in a conditioned room at 27 ± 2°C and 65 ± 2 percent relative humidity for 18 hours.)	-	200	-
3.2.7.2(Colour fastness to washing- When tested as prescribed in IS : 764-19667, the change in colour and the degree of staining of the material shall be of rating 3 or better.)	-	400	-
3.2.9(Dimension-)	-	0	-
Cl. 3.2.2.1, Appendix A-2, IS 1039(Copper Content)	-	0	Repeated
Cl. 3.2.2.1, Appendix A-2, IS 1040(Zinc Content)	-	0	Repeated
3.2.8(Shrinkage-material shall not have more than 3 percent shrinkage in warp or weft direction (As per A-3))	-	0	Repeated
Cl. 3.2.3 (pH Value)	-	0	Repeated
Cl. 3.2.1 , Appendix A-1(Proofing Content)	-	0	Repeated
3.2.6.2(Bundesmann water repellency test for special proofed duck-there shall be no penetration ofwater through the fabric and its inner side shall not be wetted. The water absorption shall not exceed 60 percent by mass.)	-	0	Repeated
Cl. 3.2.2.1(Resistance to Microbial Attack)	-	0	Repeated
3.2.7.1(Colour fastness-The material when tested prescribed in IS : 2454-1967*, shall show a fastness rating of not less than 5, unless otherwise agreed to between the purchaser and the supplier.)	-	0	Repeated
3.1(Base fabric(Refer IS 1422 for cotton duck and IS 1424 for Cotton canvas))	-	0	Repeated
3.2.4(Pliability- Special proofed canvas on duck shall be pliable when the sample is kept for 2 hours at 0 degree )	-	0	Repeated
3.2.5(Breaking strength of special proofed canvas and duck- Average(IS 1969) )	-	0	Repeated
3.2.6.1, table 1(Waterpoofness-Pressure head test for special proofed canvas-(refer Annexure E))	-	0	Repeated
3.2.6.3(Cone test -Form a cone by folding, pressing and creasing a 300 x 300 mm piece of special proofed canvas or duck. Suspend it by means of a metal ring and fill the cone with 400 ml of water and allowit to stand as such in a conditioned room at 27 ± 2°C and 65 ± 2 percent relative humidity for 18 hours.)	-	0	Repeated
3.2.7.2(Colour fastness to washing- When tested as prescribed in IS : 764-19667, the change in colour and the degree of staining of the material shall be of rating 3 or better.)	-	0	Repeated
3.2.9(Dimension-)	-	0	Repeated
Cl. 3.2.2.1, Appendix A-2, IS 1039(Copper Content)	-	0	Repeated
Cl. 3.2.2.1, Appendix A-2, IS 1040(Zinc Content)	-	0	Repeated
3.2.8(Shrinkage-material shall not have more than 3 percent shrinkage in warp or weft direction (As per A-3))	-	0	Repeated
Cl. 3.2.3 (pH Value)	-	0	Repeated
Cl. 3.2.1 , Appendix A-1(Proofing Content)	-	0	Repeated
3.2.6.2(Bundesmann water repellency test for special proofed duck-there shall be no penetration ofwater through the fabric and its inner side shall not be wetted. The water absorption shall not exceed 60 percent by mass.)	-	0	Repeated
Cl. 3.2.2.1(Resistance to Microbial Attack)	-	0	Repeated
3.2.7.1(Colour fastness-The material when tested prescribed in IS : 2454-1967*, shall show a fastness rating of not less than 5, unless otherwise agreed to between the purchaser and the supplier.)	-	0	Repeated
3.1(Base fabric(Refer IS 1422 for cotton duck and IS 1424 for Cotton canvas))	-	0	Repeated
3.2.4(Pliability- Special proofed canvas on duck shall be pliable when the sample is kept for 2 hours at 0 degree )	-	0	Repeated
3.2.5(Breaking strength of special proofed canvas and duck- Average(IS 1969) )	-	0	Repeated
3.2.6.1, table 1(Waterpoofness-Pressure head test for special proofed canvas-(refer Annexure E))	-	0	Repeated
3.2.6.3(Cone test -Form a cone by folding, pressing and creasing a 300 x 300 mm piece of special proofed canvas or duck. Suspend it by means of a metal ring and fill the cone with 400 ml of water and allowit to stand as such in a conditioned room at 27 ± 2°C and 65 ± 2 percent relative humidity for 18 hours.)	-	0	Repeated
3.2.7.2(Colour fastness to washing- When tested as prescribed in IS : 764-19667, the change in colour and the degree of staining of the material shall be of rating 3 or better.)	-	0	Repeated
3.2.9(Dimension-)	-	0	Repeated

20 Jan, 2028

-
-

6465

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 1 (1968)

Specification for the national flag of India (Cotton khadi) (second revision)

All

7250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.2 Table 1 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	175	-
3.1.2.3 Table 2 iii) IS 2977( Dimensional changes)	-	200	-
5.2(Depth of Lapped seam 10 mm ± 2 mm)	-	150	-
3.2.2 Table 3 ii) IS 1963(Picks/dm)	-	100	-
3.2.2 Table 3 i) IS 1963(Ends/dm)	-	100	-
3.1.2 Table 1 i) IS 1963(Ends/dm)	-	100	-
3.1.2 Table 1 ii) IS 1963(Picks/dm)	-	100	-
3.1.2 Table 1 iii) IS 1964(Weight)	-	250	-
3.2.2 Table 3 iii) IS 1964(Weight)	-	250	-
3.1.2.3 Table 2 i)b IS 765(Washing)	-	400	-
3.1.2.3 Table 2 i)a IS 686/IS 2454(The colour fastness ratings and other requirements of hunting are given in Table 2: Colour fastness to : l.ight)	-	400	-
3.1.2.3 Table 2 ii) Cold Method of IS 1390(pH Value)	-	250	-
5,5.1 b(The number of stitches shall not be less than 4 per cm)	-	0	-
3.1 3.1.1(Cotton Khadi Bunting : Yarn -“The yarn used for the manufacture of bunting shall be hand_ spun from clean-carded cotton. The approximate count of yarn for warp and weft shall he 30 tex x 2 (or Nm 33/2 ).)	-	250	-
3.1.2 Table 1 iv)b IS 1969(Weft)	-	175	-
3.2 3.2.1(Cotton Khadi Duck :- used for the sleeve of the flag. Yarn -The yarn used in the manufacture of duck shall be handspun from clean carded cotton. The approximate count of yarn for warpand weft shall be 38 tex x 3 (or Nm 26/3).)	-	250	-
3.2.2 Table 3 iv)b IS 1969(Weft)	-	175	-
3.2.2 Table 3 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	175	-
5.5.1(Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-	0	-
2,2.1(Design)	-	0	-
2.2(Design)	-	0	-
2.2(Design)	-	0	-
3(MATERIALS)	-	0	-
3.1.2 Table 1(Cloth--The bunting shall be woven on handlooms in plain weave. )	-	100	-
3.1.2 Table 1(The particulars of bunting shall be as given in Table 1)	-	0	-
3.1.2.1(Cloth)	-	0	-
3.1.2.2(Cloth)	-	0	-
3.2 3.2.2 Table 3(Cotton Khadi Duck :- used for the sleeve of the flag. Cloth - The duck shall be woven on handlooms in plain weave. It shall he used in the scoured state and shall, confwm to fhe requirements of Table 3. )	-	100	-
3.2.2 Table 3 (REQUIREMENTS OF COTTON KHADI DUCK :-)	-	50	-
3.3,3.3.1 IS 1720(Sewing Threads )	-	1050	-
3.3,3.3.2 IS 1720(Sewing Threads)	-	1050	-
3.4 3.4.1,Table 4 i)(Hemp Cordage The cordages of various sizes shall conform to the requirements given in Table 4. Size )	-	100	-
3.4 3.4.1,Table 4 ii)(No of Strands)	-	0	-
3.4 3.4.1,Table 4 iii)(Linear Density)	-	250	-
3.4 3.4.1,Table 4 iv) Appendix A.(Breaking load)	-	350	-
3.5,3.5.1(Wooden Toggles)	-	200	-
4,4.1 Table 5 Fig. 2 & 3(Dimensions of Flag )	-	0	-
4,4.1 Table 5 Fig. 2 & 3(A)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(B)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(C)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(D)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(E)	-	0	-
4,4.1 Table 5 Fig. 2 & 3( Dimension of Hemp Cordage and Loop L)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(M)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(N)	-	0	-
3.5.2 Table 5 Fig.1(Wooden Toggle P)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(Q)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(R)	-	0	-
4,4.1 Table 5 Fig. 2 & 3(S)	-	0	-
4,4.1 Table 5 Fig. 2 & 4(T)	-	0	-
4.2(FLAG)	-	0	-
4.3 a IS 1803(Asoka Chakra)	-	0	-
4.3 b IS 1804(Asoka Chakra)	-	0	-
4.3.1 Table 6 Fig. 4.(Dimensions of the Asoka Chakra )	-	100	-
4.3.1 Table 6 Fig. 4.(J)	-	0	-
4.3.1 Table 6 Fig. 4.(K)	-	0	-
4.3.1 Table 6 Fig. 4.(L)	-	0	-
4.3.1 Table 6 Fig. 4.(N)	-	0	-
5,5.1 a(Constructions)	-	0	-
5.3(Reinforcements -)	-	0	-
5.4( Sleeve)	-	50	-
5.5(Hemp cordage)	-	50	-
5.6(Toggle)	-	0	-
3.1.2.3 Table 2 iii) IS 2977( Dimensional changes)	-	0	Repeated
5.2(Depth of Lapped seam 10 mm ± 2 mm)	-	0	Repeated
3.2.2 Table 3 ii) IS 1963(Picks/dm)	-	0	Repeated
3.2.2 Table 3 i) IS 1963(Ends/dm)	-	0	Repeated
3.1.2 Table 1 i) IS 1963(Ends/dm)	-	0	Repeated
3.1.2 Table 1 ii) IS 1963(Picks/dm)	-	0	Repeated
3.1.2 Table 1 iii) IS 1964(Weight)	-	0	Repeated
3.2.2 Table 3 iii) IS 1964(Weight)	-	0	Repeated
3.1.2.3 Table 2 i)b IS 765(Washing)	-	0	Repeated
3.1.2.3 Table 2 i)a IS 686/IS 2454(The colour fastness ratings and other requirements of hunting are given in Table 2: Colour fastness to : l.ight)	-	0	Repeated
3.1.2.3 Table 2 ii) Cold Method of IS 1390(pH Value)	-	0	Repeated
5,5.1 b(The number of stitches shall not be less than 4 per cm)	-	0	Repeated
3.1 3.1.1(Cotton Khadi Bunting : Yarn -“The yarn used for the manufacture of bunting shall be hand_ spun from clean-carded cotton. The approximate count of yarn for warp and weft shall he 30 tex x 2 (or Nm 33/2 ).)	-	0	Repeated
3.1.2 Table 1 iv)b IS 1969(Weft)	-	0	Repeated
3.2 3.2.1(Cotton Khadi Duck :- used for the sleeve of the flag. Yarn -The yarn used in the manufacture of duck shall be handspun from clean carded cotton. The approximate count of yarn for warpand weft shall be 38 tex x 3 (or Nm 26/3).)	-	0	Repeated
3.1.2 Table 1 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	0	Repeated
3.2.2 Table 3 iv)b IS 1969(Weft)	-	0	Repeated
3.2.2 Table 3 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	0	Repeated
5.5.1(Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-	0	Repeated
2,2.1(Design)	-	0	Repeated
2.2(Design)	-	0	Repeated
2.2(Design)	-	0	Repeated
3(MATERIALS)	-	0	Repeated
3.1.2 Table 1(Cloth--The bunting shall be woven on handlooms in plain weave. )	-	0	Repeated
3.1.2 Table 1(The particulars of bunting shall be as given in Table 1)	-	0	Repeated
3.1.2.1(Cloth)	-	0	Repeated
3.1.2.2(Cloth)	-	0	Repeated
3.2 3.2.2 Table 3(Cotton Khadi Duck :- used for the sleeve of the flag. Cloth - The duck shall be woven on handlooms in plain weave. It shall he used in the scoured state and shall, confwm to fhe requirements of Table 3. )	-	0	Repeated
3.2.2 Table 3 (REQUIREMENTS OF COTTON KHADI DUCK :-)	-	0	Repeated
3.3,3.3.1 IS 1720(Sewing Threads )	-	0	Repeated
3.3,3.3.2 IS 1720(Sewing Threads)	-	0	Repeated
3.4 3.4.1,Table 4 i)(Hemp Cordage The cordages of various sizes shall conform to the requirements given in Table 4. Size )	-	0	Repeated0
3.4 3.4.1,Table 4 ii)(No of Strands)	-	0	Repeated
3.4 3.4.1,Table 4 iii)(Linear Density)	-	0	Repeated
3.4 3.4.1,Table 4 iv) Appendix A.(Breaking load)	-	0	Repeated
3.5,3.5.1(Wooden Toggles)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(Dimensions of Flag )	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(A)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(B)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(C)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(D)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(E)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3( Dimension of Hemp Cordage and Loop L)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(M)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(N)	-	0	Repeated
3.5.2 Table 5 Fig.1(Wooden Toggle P)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(Q)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(R)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(S)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 4(T)	-	0	Repeated
4.2(FLAG)	-	0	Repeated
4.3 a IS 1803(Asoka Chakra)	-	0	Repeated
4.3 b IS 1804(Asoka Chakra)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(Dimensions of the Asoka Chakra )	-	0	Repeated
4.3.1 Table 6 Fig. 4.(J)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(K)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(L)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(N)	-	0	Repeated
5,5.1 a(Constructions)	-	0	Repeated
5.3(Reinforcements -)	-	0	Repeated
5.4( Sleeve)	-	0	Repeated
5.5(Hemp cordage)	-	0	Repeated
5.6(Toggle)	-	0	Repeated
3.1.2.3 Table 2 iii) IS 2977( Dimensional changes)	-	0	Repeated
5.2(Depth of Lapped seam 10 mm ± 2 mm)	-	0	Repeated
3.2.2 Table 3 ii) IS 1963(Picks/dm)	-	0	Repeated
3.2.2 Table 3 i) IS 1963(Ends/dm)	-	0	Repeated
3.1.2 Table 1 i) IS 1963(Ends/dm)	-	0	Repeated
3.1.2 Table 1 ii) IS 1963(Picks/dm)	-	0	Repeated
3.1.2 Table 1 iii) IS 1964(Weight)	-	0	Repeated
3.2.2 Table 3 iii) IS 1964(Weight)	-	0	Repeated
3.1.2.3 Table 2 i)b IS 765(Washing)	-	0	Repeated
3.1.2.3 Table 2 i)a IS 686/IS 2454(The colour fastness ratings and other requirements of hunting are given in Table 2: Colour fastness to : l.ight)	-	0	Repeated
3.1.2.3 Table 2 ii) Cold Method of IS 1390(pH Value)	-	0	Repeated
5,5.1 b(The number of stitches shall not be less than 4 per cm)	-	0	Repeated
3.1 3.1.1(Cotton Khadi Bunting : Yarn -“The yarn used for the manufacture of bunting shall be hand_ spun from clean-carded cotton. The approximate count of yarn for warp and weft shall he 30 tex x 2 (or Nm 33/2 ).)	-	0	Repeated
3.1.2 Table 1 iv)b IS 1969(Weft)	-	0	Repeated
3.2 3.2.1(Cotton Khadi Duck :- used for the sleeve of the flag. Yarn -The yarn used in the manufacture of duck shall be handspun from clean carded cotton. The approximate count of yarn for warpand weft shall be 38 tex x 3 (or Nm 26/3).)	-	0	Repeated
3.1.2 Table 1 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	0	Repeated
3.2.2 Table 3 iv)b IS 1969(Weft)	-	0	Repeated
3.2.2 Table 3 iv)a IS 1969( Breaking load on 50 x 200 mm strips: Wrap)	-	0	Repeated
5.5.1(Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-	0	Repeated
2,2.1(Design)	-	0	Repeated
2.2(Design)	-	0	Repeated
2.2(Design)	-	0	Repeated
3(MATERIALS)	-	0	Repeated
3.1.2 Table 1(Cloth--The bunting shall be woven on handlooms in plain weave. )	-	0	Repeated
3.1.2 Table 1(The particulars of bunting shall be as given in Table 1)	-	0	Repeated
3.1.2.1(Cloth)	-	0	Repeated
3.1.2.2(Cloth)	-	0	Repeated
3.2 3.2.2 Table 3(Cotton Khadi Duck :- used for the sleeve of the flag. Cloth - The duck shall be woven on handlooms in plain weave. It shall he used in the scoured state and shall, confwm to fhe requirements of Table 3. )	-	0	Repeated
3.2.2 Table 3 (REQUIREMENTS OF COTTON KHADI DUCK :-)	-	0	Repeated
3.3,3.3.1 IS 1720(Sewing Threads )	-	0	Repeated
3.3,3.3.2 IS 1720(Sewing Threads)	-	0	Repeated
3.4 3.4.1,Table 4 i)(Hemp Cordage The cordages of various sizes shall conform to the requirements given in Table 4. Size )	-	0	Repeated
3.4 3.4.1,Table 4 ii)(No of Strands)	-	0	Repeated
3.4 3.4.1,Table 4 iii)(Linear Density)	-	0	Repeated
3.4 3.4.1,Table 4 iv) Appendix A.(Breaking load)	-	0	Repeated
3.5,3.5.1(Wooden Toggles)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(Dimensions of Flag )	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(A)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(B)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(C)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(D)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(E)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3( Dimension of Hemp Cordage and Loop L)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(M)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(N)	-	0	Repeated
3.5.2 Table 5 Fig.1(Wooden Toggle P)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(Q)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(R)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 3(S)	-	0	Repeated
4,4.1 Table 5 Fig. 2 & 4(T)	-	0	Repeated
4.2(FLAG)	-	0	Repeated
4.3 a IS 1803(Asoka Chakra)	-	0	Repeated
4.3 b IS 1804(Asoka Chakra)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(Dimensions of the Asoka Chakra )	-	0	Repeated
4.3.1 Table 6 Fig. 4.(J)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(K)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(L)	-	0	Repeated
4.3.1 Table 6 Fig. 4.(N)	-	0	Repeated
5,5.1 a(Constructions)	-	0	Repeated
5.3(Reinforcements -)	-	0	Repeated
5.4( Sleeve)	-	0	Repeated
5.5(Hemp cordage)	-	0	Repeated
5.6(Toggle)	-	0	Repeated

20 Jan, 2028

-
-

6466

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

8150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	100	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	400	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	125	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	100	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	100	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	100	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	100	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	100	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	100	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	200	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	300	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	100	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	125	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	100	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	100	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	200	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	50	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	125	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	200	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	500	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	150	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	150	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	150	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	150	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	600	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	200	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	200	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	100	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	400	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	300	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	50	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	100	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	50	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	50	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	200	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	100	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	125	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	50	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	50	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	50	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	50	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	50	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	50	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	50	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	50	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	50	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	200	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	200	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	0	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	0	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	0	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	0	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	0	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	0	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	0	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	0	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	0	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	0	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	0	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	0	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	0	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	0	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	0	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	0	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	0	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	0	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	0	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	0	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	0	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	0	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	0	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	0	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	0	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	0	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	0	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	0	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	0	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	0	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	0	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	0	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	0	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	0	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	0	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	0	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	0	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	0	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	0	-

20 Jan, 2028

-
-

6467

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 3735 (1996)

Canvas Shoes, Rubber Sole

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	100	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	300	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	350	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	400	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	400	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	350	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	400	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	100	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	100	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	350	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Above
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	200	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	300	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	250	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Repeated
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Repeated
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Repeated
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Repeated
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Repeated
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Repeated
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Repeated
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Repeated
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Repeated
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Repeated
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Repeated
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Repeated
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Repeated
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Repeated
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Repeated
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Repeated
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Repeated
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Repeated
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Repeated
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Repeated
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Repeated
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Repeated
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Repeated
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Repeated
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Repeated
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Repeated
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Repeated
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Repeated
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Repeated
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Repeated
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Repeated
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Repeated
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Repeated
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Repeated
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Repeated
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Repeated
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Repeated
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Repeated
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Repeated
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Repeated
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Repeated
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Repeated
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Repeated
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Repeated
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Repeated
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Repeated
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Repeated
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Repeated
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Repeated
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Repeated
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Repeated
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Repeated
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Repeated
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Repeated
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Repeated
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Repeated
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Repeated
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Repeated
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Repeated
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Repeated
4.8(Adhesion )	-	0	Repeated
4.7(Consolidation test )	-	0	Repeated
4.6(Mass )	-	0	Repeated
4.5(Finish )	-	0	-
4.4(Contruction )	-	0	-
4.3(Leg Height )	-	0	-
4.2(Design )	-	0	-
4.1.6.2(Thickness of components )	-	0	Repeated
4.1.6.2(Ageing)	-	0	Repeated
4.1.6.2(Elongation at break after ageing )	-	200	-
4.1.6.2(Tensile after ageing )	-	200	-
4.1.6(Compression set )	-	300	-
4.1.6(Elongation at break )	-	200	-
4.1.6(Tensile strength)	-	200	-
4.1.6(Hardness (after accelerated ))	-	200	-
4.1.6(Flexing resistance test)	-	600	-
4.1.6(Hardness )	-	200	-
4.1.6(Relative density)	-	200	-
4.1.5(Sulpher dyes content )	-	0	-
4.1.5(Breaking Load )	-	0	Repeated
4.1.5(Length )	-	0	Repeated
4.1.4(Thickness)	-	0	Repeated
4.1.4(Size )	-	0	Repeated
4.1.3(Color fastness to perspiration)	-	400	-
4.1.3(Colorfastness to washing)	-	400	-
4.1.3(Colorfastness to light )	-	0	Repeated
4.1.3(Single thread breaking load)	-	0	Repeated
4.1.3(Construction )	-	0	Repeated
4.1.2(Colorfastness to light )	-	0	Repeated
4.1.2(Colorfastness to washing)	-	400	-
4.1.2(Breaking Strength )	-	350	-
4.1.2(Width )	-	0	Repeated
4.1.1.2(Colorfastness to washing)	-	400	-
4.1.1.1(Colorfastness to light )	-	0	Repeated
4.1.1 (Drill) (End & Picks/dm)	-	200	-
4.1.1 (Drill) (Colorfastness to light )	-	0	Repeated
4.1.1 (canvas )(End & Picks/dm)	-	200	-
4.1.1 (canvas )(Breaking Load )	-	350	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	0	-

20 Jan, 2028

-
-

6468

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 1422 (1983)

Specification for cotton duck (third revision)

3400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	250	-
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	500	-
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	500	-
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	200	Shrinkage or Elongation %
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	400	-
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	400	-
3.1(MANUFACTURE)	-	150	-
3.2(MANUFACTURE)	-	150	-
4.1,Table 1(Contsructional Particulars )	-	125	-
4.1,Table 1(Contsructional Particulars )	-	125	-
4.1,Table 1(Contsructional Particulars )	-	100	-
4.1,Table 1(Contsructional Particulars )	-	100	-
4.1,Table 1(Contsructional Particulars )	-	250	-
4.1,Table 1(Contsructional Particulars )	-	350	-
4.1,Table 1(Contsructional Particulars )	-	200	-
4.1,Table 1(Contsructional Particulars )	-	100	-
5.1 (a)(MARKING)	-	0	-
5.1 (b)(MARKING)	-	0	-
5.1 (c)(MARKING)	-	0	-
5.1 (d)(MARKING)	-	0	-
5.1 (e)(MARKING)	-	0	-
5.1 (f)(MARKING)	-	0	-
5.1 (g)(MARKING)	-	0	-
5.1.2(MARKING)	-	0	-
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	0	-
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	0	Repeated
Cl 4.2, Table 2, Sr. No. 2(pH value )	-	0	Repeated
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	0	Repeated
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	0	Repeated
3.1(MANUFACTURE)	-	0	Repeated
3.2(MANUFACTURE)	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
5.1 (a)(MARKING)	-	0	Repeated
5.1 (b)(MARKING)	-	0	Repeated
5.1 (c)(MARKING)	-	0	Repeated
5.1 (d)(MARKING)	-	0	Repeated
5.1 (e)(MARKING)	-	0	Repeated
5.1 (f)(MARKING)	-	0	Repeated
5.1 (g)(MARKING)	-	0	Repeated
5.1.2(MARKING)	-	0	Repeated
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Scoured or Dyed)	-	0	Repeated
Cl 4.2, Table 2, Sr. No. 1(Scouring loss, Grey)	-	0	Repeated
Cl 4.2, Table 2, Sr. No.4(Colour fastness ( for dyed duck ) to: Light)	-	0	Repeated
Cl 4.2, Table 2, Sr. No.5(Washing - Test 3)	-	0	Repeated
3.1(MANUFACTURE)	-	0	Repeated
3.2(MANUFACTURE)	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
4.1,Table 1(Contsructional Particulars )	-	0	Repeated
5.1 (a)(MARKING)	-	0	Repeated
5.1 (b)(MARKING)	-	0	Repeated
5.1 (c)(MARKING)	-	0	Repeated
5.1 (d)(MARKING)	-	0	Repeated
5.1 (e)(MARKING)	-	0	Repeated
5.1 (f)(MARKING)	-	0	Repeated
5.1 (g)(MARKING)	-	0	Repeated
5.1.2(MARKING)	-	0	Repeated

20 Jan, 2028

-
-

6469

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

20200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.14.8(Flexing resistance )	-	700	-
4.14.8(Flexing resistance )	-	700	-
4.16.2(Breaking Strength of lace )	-	400	-
4.16.1(Length of lace )	-	100	-
4.15(D-ring & Hooks )	-	350	-
6.1(Resistance to Fuel Oil)	-	500	-
4.14.9(Resistance to hot contact )	-	300	-
4.14.7(Ageing test)	-	500	-
4.14.6(Hardness (IRHD))	-	100	-
4.14.5(Abrasion resistance )	-	700	-
4.14.4(Tear Strength)	-	400	-
4.14.3(Sole Density )	-	200	-
4.14.2(Thickness)	-	100	-
4.14.1(Material)	-	350	-
4.13(Breaking Strength of thread )	-	400	-
4.12.2(Tear Strength)	-	400	-
4.12.1(Thickness )	-	100	-
4.11.2(Tear Strength)	-	400	-
4.11.1(Thickness )	-	100	-
4.10.3(Water absorption & desorption percent)	-	500	-
4.10.2(Abrasion resistance )	-	1000	-
4.10.1(Material)	-	350	-
4.9.3(Water absorption & desorption percent)	-	500	-
4.9.2(Abrasion resistance )	-	500	-
4.9.1(Thickness)	-	100	-
4.8(Thickness Toe puff & counter stiffener)	-	100	-
4.7.5(Water Vapour permeability & coefficient )	-	800	-
4.7.4(Abrasion resistance )	-	1000	-
4.7.3(Tear Strength)	-	400	-
4.7.2(Material Counter & Tongue)	-	350	-
4.7.1(Material vamp & Quarter)	-	350	-
4.6.3(Water Penetration and water absorption )	-	800	-
4.6.2(Tear Strength)	-	400	-
4.6.1(Thickness )	-	100	-
4.5.8(Energy absorption of seat region )	-	400	-
4.5.7(Cold Insulation of sole complex)	-	500	-
4.5.6(Heat Insulation of sole Complex)	-	500	-
4.5.5(Antistatic test)	-	1000	-
4.5.4(Slip Resitance)	-	1200	-
4.5.3.2(Interayer bond strength)	-	400	-
4.5.3.1(Upper/outsole bond strength)	-	400	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Construction)	-	500	-
4.4(Height of upper )	-	100	-
4.3.2(Weight)	-	250	-
4.3.1(Size)	-	100	-
4.2(Design )	-	200	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	500	-
8, 8.1, 8.2, 8.2.1(Marking)	-	500	-

20 Jan, 2028

-
-

6470

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 4605 (2020)

Crepe Bandage - Specification ( Second Revision )

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.5(Breaking Load)	-	500	-
8.3( Elasticity)	-	500	-
8.2( Weight per Unit Area)	-	300	-
8.1( Threads per Stated Length 2)Ends)	-	125	-
8.1( Threads per Stated Length 1)Ends)	-	125	-
6.0( Workmanship and finish )	-	200	-
5.2(The selvedge )	-	200	-
5.1.2 (Weft Yarns)	-	250	-
5.1.1 (Warp Yarns)	-	250	-
4 (Annexure B)(DIMENSIONS 2) Length (Stretched))	-	250	-
4.0( DIMENSIONS 1)Width (cm) (Unstretched))	-	250	-
3.0(MATERIAL)	-	700	-
Clause.8.7(Ether Soluble Substances)	-	500	-
Clause.8.6(Water Soluble Substances)	-	500	-
Clause.8.4(Chemical Neutrality)	-	300	-
Clause.8.7(Ether Soluble Substances)	-	0	Repeated
Clause.8.6(Water Soluble Substances)	-	0	Repeated
Clause.8.4(Chemical Neutrality)	-	0	Repeated
Clause 3(Material used in manufacturing of crepe bandage)	-	0	Repeated
Clause 3(Quality of Rayon)	-	0	Repeated
Clause 4(Dimensions (width, cm and length , m))	-	0	Repeated
Clause 5.1.1(Warp Yarns)	-	0	Repeated
Clause 5.1.2(Weft Yarns)	-	0	Repeated
Clause 8.1(Threads per Stated Length)	-	0	Repeated
Clause 8.2(Weight per Unit Area)	-	0	Repeated
Clause 8.3(Elasticity)	-	0	Repeated
Clause 8.4(PH for Chemical neutrality)	-	0	Repeated
Clause 8.5(Breaking Load , N)	-	0	Repeated
Clause 8.6(Water Soluble Substances , percent)	-	0	Repeated
Clause 8.7(Ether Soluble Substances, percent)	-	0	Repeated
Clause 3(Material used in manufacturing of crepe bandage)	-	0	Repeated
Clause 3(Quality of Rayon)	-	0	Repeated
Clause 4(Dimensions (width, cm and length , m))	-	0	Repeated
Clause 5.1.1(Warp Yarns)	-	0	Repeated
Clause 5.1.2(Weft Yarns)	-	0	Repeated
Clause 8.1(Threads per Stated Length)	-	0	Repeated
Clause 8.2(Weight per Unit Area)	-	0	Repeated
Clause 8.3(Elasticity)	-	0	Repeated
Clause 8.4(PH for Chemical neutrality)	-	0	Repeated
Clause 8.5(Breaking Load , N)	-	0	Repeated
Clause 8.6(Water Soluble Substances , percent)	-	0	Repeated
Clause 8.7(Ether Soluble Substances, percent)	-	0	Repeated

20 Jan, 2028

-
-

6471

CIPET, Ahmedabad

7116134

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

27568 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	250	4.2,5.1,5.2, 5.3,5.4
5.2 Table 1(Dimensions)	-	250	4.2,5.1,5.2, 5.3,5.4
5.2 Table 1(Ends per dm)	-	250	4.2,5.1,5.2, 5.3,5.4
5.2 Table 1(Picks per dm)	-	250	4.2,5.1,5.2, 5.3,5.4
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	250	4.2,5.1,5.2, 5.3,5.4
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1350	1100+250
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1350	1100+250
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1350	1100+250
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	0
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	0
5.2 Table 1(Drop impact strength)	-	1100	0
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	950	0
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	950	0
5.2 Table 1(Dimensions)	-	250	0
5.2 Table 1(Dimensions)	-	250	0
5.2 Table 1(Dimensions)	-	250	0

31 Dec, 2027

-
-

6472

CIPET, Ahmedabad

7116134

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

23394 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	300
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	0
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	0
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	0
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	0
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	0
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	0
9.1(PIPE ENDS)	-	0	0
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	0
Clause 10.7(Sulphated Ash Content)	-	950	0
10.1(Colour)	-	300	0

31 Dec, 2027

-
-

6473

CIPET, Ahmedabad

7116134

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

152694 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	7.1.1, 7.1.2, 7.1.3
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	Included in 7.1.1
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	Included in 7.1.1
7.1.3 (Effective length)	-	0	Included in 7.1.1
8(Pipe Ends)	-	300	8, 9.1
9.1(Visual Appearance)	-	0	Included in 9.1
9.2 IS 12235 (Part 3)(Opacity)	-	575	0
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	9.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	9.3
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	0
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	0
9.6 IS 12235(Part 14)(Density)	-	500	0
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	20°C /1 h.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	95°C /165 h
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	95°C /1000 h
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	1000	1000+109500
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1100	1100+300
10.4 IS 12235(Part 19)(Flattening Test)	-	500	0
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1100	1100+500
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11000	11000+300
6.3(K value Test)	-	1100	0
6.2.1 Annex B(Chloride Content of Resin)	-	4300	0
6.3.1 Annex B(Chloride content)	-	4300	0
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	0

31 Dec, 2027

-
-

6474

CIPET, Ahmedabad

7116134

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

33275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	0
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	0
7.2.1 (Visual and Workmanship Requirement)	-	300	0
3.0(Reversion test)	-	700	700+300
3.0(Tensile strength at yield)	-	1100	1100+250
3.0((ii)Acceptance Test at 3.8MPa induced stress for 48 hours at 80°C)	-	1600	0
3.0((i)Quality Test at 3.5MPa induced stress for 165 hours at 80°C)	-	4800	0
4.1.1.2.1(Density)	-	500	0
4.1.1.2.1(MFI @ 1900C/5.0 Kg)	-	1100	0
4.1.5(a. Identification of Rubber Ring)	-	1050	0
4.1.5(b. Colour of rubber ring)	-	300	0
4.1.5(c. Change in hardness after keeping it in air at 70°C for 7 days)	-	375	0
6.1.1, 6.1.1.1(Leakage Test)	-	850	0
6.1.2.2( Hydraulic Proof Test)	-	850	0
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	0
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	0

31 Dec, 2027

-
-

6475

CIPET, Ahmedabad

7116134

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

11594 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(K-Value as per IS-4669)	-	1100	0
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	3000	0
8.4(Sealing rings - Hardness)	-	375	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	0
9.1(Visual Appearance)	-	300	0
9.2(Internal Diameter)	-	350	0
9.3(Density IS 12235 (Part 14))	-	500	0
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1100	1100+300
9.5(Tensile Strength IS 12235(Part 13))	-	1100	1100+500
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	0
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	0

31 Dec, 2027

-
-

6476

CIPET, Ahmedabad

7116134

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

38700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	250	0
6.2.1(6.1.1 Identification Stripes)	-	250	0
7()	-	300	0
7.2(Length)	-	500	0
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	0	0
7.4.1.2(Ovality)	-	0	0
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	1600+4000+4800+11000
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	0
8.2(Longitudinal Reversion Test)	-	700	0
8.3(Carbon black)	-	925	0
8.4( Melt Flow Rate)	-	1100	0
8.5 (Oxidation Induction Time)	-	2200	0
8.6(Overall migration)	-	1700	0
8.7(Density)	-	500	0
8.8(Tensile Strength for Butt-fusion)	-	1100	1100+250
8.9 table-6(Elongation at Break)	-	1100	0
8.10(Slow Crack Growth Rate)	-	5500	0
5.2(Density)	-	500	0
5.2(MFI @ 1900C/5.0 Kg)	-	1100	0
5.2(Volatile matter Content)	-	700	0

31 Dec, 2027

-
-

6477

CIPET, Ahmedabad

7116134

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

356175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4(Colour)	-	0		0
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	0		0
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	0		0
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	0		0
6.4(Length of pipe)	-	0		0
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0		0
8.1(Hydraulic Charactristics, Annex-A)	-	0		0
8.2(Reversion Test. Annex-C)	-	0		0
8.3(Density, Annex A of IS 7328)	-	0		0
8.4(Melt Flow Rate (MFR), IS 2530)	-	0		0
8.7(Tensile yield strength, Annex-J)	-	0		0
8.7(Elongation at break, Annex-J)	-	0		0
8.5(Thermal Stability to Oxidation, Annex-D)	-	0		0
8.8(Resistance to Weathering, Annex-F)	-	0		0
8.9(Squeeze off, Annex-G)	-	0		0
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	0		0
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	0		0
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	0		0
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	0		0
Table-2, 5.1(Thermal Staibility, Annex-D)	-	0		0
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	0		0
Table-2, 5.1(Pigment dispersion, Annex-E)	-	0		0

31 Dec, 2027

-
-

6478

CIPET, Ahmedabad

7116134

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

18150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	Tio2
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	6.1.1, 6.1.2, 6.1.3 & 6.1.4
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	Included in 6.1
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	Included in 6.1
6.1.3 (Length of Pipe)	-	0	Included in 6.1
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	Included in 6.1
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	Included in 6.1
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	Included in 6.1
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	Included in 6.1
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	Included in 6.1
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	Included in 6.1
6.1.4.1 (e3min=0.75e)	-	0	Included in 6.1
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	Included in 6.1
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	Included in 6.1
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	Included in 6.1
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	Included in 6.1
7.1(Appearance:- )	-	300	0
7.2(Colour )	-	300	0
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	0
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	700	700+300
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1100	1100+300
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1100	1100+300
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	0
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	0
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	0
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	0
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	0

31 Dec, 2027

-
-

6479

CIPET, Ahmedabad

7116134

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

20438 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Finish)	-	300	0
8.3(Dimensional Tolerances)	-	500	0
9.2, 11.4(Moisture content)	-	700	700+500
11.10(screw withdrawal strength)	-	1100	1100+500
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	0
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	0
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	0
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	0
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	0
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	550	550+500
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	550	550+500
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	550	550+500
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	550	550+500
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	550	550+500
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	550	550+500
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	550	550+500
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	550	550+500
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	550	550+500
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	550	0
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	550	0
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	550	0
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	550	0
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	550	0
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	550	0
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	550	0
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	550	0
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	550	0
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	550	0
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	550	0
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	550	0
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	550	0
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	550	0
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	550	0
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	550	0
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	550	0
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	550	0
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	550	0
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1100	1100+500
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1100	1100+500
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1100	1100+500
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1100	1100+500
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1100	1100+500
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1100	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1100	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1100	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1100	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1100	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1100	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1100	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1100	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1100	1100+500
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1100	1100+500

31 Dec, 2027

-
-

6480

CIPET, Ahmedabad

7116134

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

12100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700
6.2.2(Fittings)	-	0
6.3(General)	-	300
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000
8.3.1(Wall Thickness ofEmitting Pipe)	-	250
8.3.2(Inside Diameter ofEmitting Pipe)	-	0
8.3.3(Flow Paths in Emitting Unit)	-	400
8.3.4(Spacing ofEmitter Units)	-	0
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600
8.5(Resistance to Tension at Elevated Temperature)	-	1100
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600
8.8(Determination of Emitting Unit Exponent)	-	600

31 Dec, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number