BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6481

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 2993 : Part 2 (2024)

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

ELECTRICAL

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1.1(General)	-	35000	-
5.1.7(Voltage test between the terminals)	-	35000	-
5.1.8(Voltage test between terminals and case)	-	35000	-
5.1.9(Capacitance measurement)	-	35000	-
5.1.10(Check of dimensions)	-	35000	-
5.1.10(Check of dimensions)	-	35000	-
5.1.11.1(Robustness of terminations)	-	35000	-
5.1.11.2(Soldering)	-	35000	-
5.1.11.3(Vibration)	-	35000	-
5.1.12(Sealing test)	-	35000	-
5.1.13(Endurance test)	-	35000	-
5.1.14(Damp heat test)	-	35000	-
5.1.15(Self-healing test)	-	35000	-
5.1.16(Destruction test)	-	35000	-
5.1.17.1(Ball-pressure test)	-	35000	-
5.1.17.2(Glow-wire test)	-	35000	-
5.1.17.3(Tracking test)	-	35000	-
5.2(Overloads)	-	35000	-
5.3.1(Creepage distances and clearances)	-	35000	-
5.3.2(Terminals and connecting cables)	-	35000	-
5.3.3(Earth connections)	-	35000	-
5.3.4(Discharge devices)	-	35000	-
5.3.5(Pollution)	-	35000	-
5.4(Marking)	-	35000	-
6.1.6(Voltage test between the terminals)	-	35000	-
6.1.7(Voltage test between terminals and case)	-	35000	-
6.1.8(Capacitance and power factor measurement)	-	35000	-
6.1.9(Check of dimensions)	-	35000	-
6.1.10.1(Robustness of terminations)	-	35000	-
6.1.10.2(Soldering)	-	35000	-
6.1.10.3(Vibration)	-	35000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	35000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	35000	-
6.1.10.5(Rapid change of temperature)	-	35000	-
6.1.11(Sealing test)	-	35000	-
6.1.12(Endurance test)	-	35000	-
6.1.13(Damp heat test)	-	35000	-
6.1.14(Pressure relief test)	-	35000	-
6.1.15.1(Ball-pressure test)	-	35000	-
6.1.15.2(Glow-wire test)	-	35000	-
6.1.15.3(Tracking test)	-	35000	-
6.2(Overloads)	-	35000	-
6.3.1(Creepage distances and clearances)	-	35000	-
6.3.2(Terminals and connecting cables)	-	35000	-
6.3.3(Earth connections)	-	35000	-
6.3.4(Discharge devices)	-	35000	-
6.3.5(Pollution)	-	35000	-
6.4(Marking)	-	35000	-
7.2.1(Measurement of working voltage)	-	35000	-
7.2.2(Influence of capacitance)	-	35000	-
7.3(Checking capacitor temperature)	-	35000	-
7.4(Checking transients)	-	35000	-
7.5(Storage of electrolytic capacitors)	-	35000	-
Annex A(Test voltage)	-	35000	-

26 Sep, 2027

-
included w.e.f.30.10.2024

6482

BIS, Eastern Regional Laboratory (ERL)

None

IS 15644 (2006)

Safety of electric toys

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
9.0 (Heating and abnormal operation)	-
10.0 (Electrical strength at operating temperature)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13 (Mechanical Strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
14.1 (Construction)	-
14.11 (Construction)	-
14.12 (Construction)	-
14.13 (Construction)	-
14.14 (Construction)	-
15.1 (Protection of cords and wires)	-
15.2 (Protection of cords and wires)	-
16.0 (Components)	-
17 Table-1 (Screws and connections)	-
17 Table-1 (Nominal daimeter of screws made of insulating material)	-
18.0 (Clearance and creepage distance)	-
19.1 (Ball pressure test IEC 60695-10-2)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-
19.2.2 (Needle flame test)	-
20.0 (Radiation, toxicity and similar hazards)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
9.3 ("Heating and Abnormal Operation (For All toys)")	-
9.4 ("Heating and Abnormal Operation (For All toys)")	-
9.5 ("Heating and Abnormal Operation (For All toys)")	-
9.6 (Heating and Abnormal Operation (For Toys incorporating motors))	-
9.7 (Heating and Abnormal Operation)	-
9.8 (Heating and Abnormal Operation)	-
9.8.1 (Heating and Abnormal Operation)	-
9.8.2 (Heating and Abnormal Operation)	-
14.15 (Construction)	-
14.16, Table 2 (Construction)	-
4.1 & Table-1 (Antimony (Sb))	-
4.1 & Table-1 (Arsenic (As))	-
4.1 & Table-1 (Barium (Ba))	-
4.1 & Table-1 (Chromium (Cr))	-
4.1 & Table-1 (Lead (Pb))	-
4.1 & Table-1 (Mercury (Hg))	-
4.1 & Table-1 (Selenium (Se))	-
4.2 (Reasonably foreseeable abuse- Cl. 5.24.2 Drop test)	-
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010) of IS 9873 : Part 7 (2017) (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.2 (Reasonably foreseeable abuse- Cl. 5.24.4 Dynamic strength test for wheeled ride-on toys other than toy scooters)	-
17.2 (Screws and connections )	-

-
Except toys having LASER and light emitting diodes. Test facilities for toys above size of 34"x22"x22" is not available.

6483

Elenergy Lab Research Pvt. Ltd., Bengaluru

6185426

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

Class 0.2S,0.5S, & 1.0S, 5 A to 6 A

201000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test of meter constant)	-	2000	-
6.10.6(ac high voltage test)	-	2500	-
6.10.6(Insulation test)	-	1500	-
6.12(Test of ambient temperature influence)	-	7500	-
6.10.5(Test of influence of heating)	-	4500	-
6.10.7(Test of immunity to earth/phase fault)	-	3000	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	5500	-
6.12(Magnetic induction of External Origin 0.5mT)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	5500	-
6.11(Fast transient burst test)	-	6000	-
6.12(Frequency Variation)	-	4000	-
6.12(Reversed Phase Sequence)	-	4000	-
6.12(Voltage Unbalanced)	-	4000	-
6.12(Voltage Variation)	-	4000	-
6.12(Waveform 10% of 3rd Harmonics)	-	4000	-
6.10.3(Test of influence of short time over currents)	-	3000	-
6.12(Test of repeatability of error)	-	7500	-
6.12(Test on limits of error)	-	15000	-
6.10.6(Impulse voltage test)	-	15000	-
6.3(Clearance and creepage distances)	-	2500	-
6.11(Surge Immunity test)	-	5000	-
6.10.4(Test of influence of self-heating)	-	3000	-
6.12(Test of no-load condition)	-	2000	-
6.10.1(Test of power consumption)	-	3000	-
6.12(Test of starting condition)	-	2000	-
6.10.2(Test of influence of supply voltage)	-	4500	-
6.9(Damp heat cyclic test)	-	25000	-
6.5(Test of protection against penetration of dust and water)	-	6000	-
6.5(Shock test)	-	5000	-
6.5(Spring hammer test)	-	1000	-
6.4(Test of resistance to heat and fire)	-	2000	-
6.5(Vibration test)	-	7500	-
6.9(Cold test)	-	15000	-
6.9(Dry heat test)	-	15000	-
6.8.1(Additional information)	-	2500	-
6.8(Connection diagrams and terminal marking)	-	2500	-
6.8(BIS Standard Mark)	-	2500	-
6.8(Marking of meters Name plate)	-	2500	-
10.0(Smart Meter Functional Requirements)	-	0	-
8, 9.5(Smart Meter Communicability)	-	0	-
9.3(Test of Display)	-	0	-
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	0	-
Note b of Table 1(Access and data read test)	-	0	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	0	-
6.12(Operation of Accessories)	-	0	-
6.12(Test of influence quantities)	-	42000	-
6.7(Output device)	-	2500	-
6.6(Display of measured values)	-	2500	-
6.2.2(Insulating encased meter)	-	2500	-
6.2.2(Terminal Cover(s))	-	2500	-
6.2.1(Heat Deflection Test)	-	2500	-
6.2.1(Terminals, terminal block and protective earth terminal)	-	2500	-
6.2(Communication module)	-	2500	-
6.2(Window)	-	2500	-
6.2(Meter case)	-	2500	-
6.2(General Constructional requirements)	-	2500	-
10(Smart Meter Functional Requirement)	-	0	-
9.5(Test for Smart meter communicability )	-	0	-
9.4(Test for Data Exchange Protocol)	-	0	-
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.5(Mechanical Requirement)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water ,Test of resistance to heat and fire
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.9(Climatic Codition)	-	55000	Mention testing charges for the Test for Climatic Influences, including the Dry heat test, Cold test, and Damp heat cyclic test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.1(Electrical Requirments)	-	21000	Mention testing charges for the Test of Electrical Requirement, including the Power consumption test ,Influence of supply voltage, Short-time over currents, Self-heating,Influence of heating, Influence of immunity to earth fault
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.12((11 of IS 14697 ) Accuracy Requirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.10.7((9.6 of IS 14697 ) Insulation Rtequirement )	-	79500	Mention testing charges for the Test of Accuracy Requirements, including the limits of error, Interpretation of test results, Meter constant, Starting condition, No-load condition, Ambient temperature, Repeatability of error,Test of influence quantities
6.10.6((9.5 of IS 14697 ) Insulation Requirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	8000	Mention testing charges for the Test of Insulation Properties, including the Insulation Resistance test, a.c. high voltage test, Impulse voltage test
9.3(Measurement)	-	0	-
6.8(Inspection )	-	2500	-
6.8(Inspection ( 7 of IS 14697) )	-	2500	-
6.7(Inspection ( 6.11 of IS 14697))	-	2500	-
6.6(Inspection ( 6.10 of IS 14697))	-	2500	-
6.3(Measurement ( 6.6 of IS 14697))	-	2500	-
6.2(General constructional Requirement)	-	2500	-
6.2(General constructional Requirement)	-	2500	-

08 May, 2028

-
Exclusions -6.11 (Test of immunity to electromagnetic HF field), 6.11 (Test of immunity to electrostatic discharge), 6.11 (Radio interference measurement)

6484

Elenergy Lab Research Pvt. Ltd., Bengaluru

6185426

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

Class 0.2 S,0.5 S & 1 S, 5 A to 10 A

183500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.14, 11.6(Test of Meter Constant/Registration)	-	1500	-
12.7.6.3, 9.5(ac Voltage test)	-	2500	-
12.7.6.4(Insulation resistance test)	-	1500	-
12.11, 11.3(Test of Ambient Temperature Influence)	-	6000	-
12.7.5, 9.4(Test of Influence of Heating)	-	4500	-
12.17, 9.6(Test of Immunity to Earth/Phase Fault)	-	3000	-
12.10, 11.2(Test of Influence Quantities)	-	32000	-
"12.8.4(Fast Transient Burst Test)	-	6000	-
12.7.3, 9.2.3()	-	3000	-
12.16, 11.7(Repeatability of Error Test)	-	5500	-
11.1(Limits of Error Due to Variation of the Current)	-	12500	-
12.7.6.2, 9.5()	-	4000	-
6.6(Clearance and Creepage Distance)	-	2500	-
12.8.5, 10.1(Surge Immunity test)	-	5000	-
12.7.4, 9.3(Test of Influence of Self-Heating)	-	3000	-
12.12, 11.4(Test of No-Load Condition)	-	1500	-
12.7.1, 9.1(Test of Power Consumption)	-	3000	-
12.13, 11.5(Test of Starting Conditions)	-	1500	-
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	4500	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
12.5(Protection against penetration of dust and water)	-	6000	-
12.3.1(Shock test)	-	5000	-
12.3.3(Spring hammer test)	-	1000	-
12.4(Test of resistance to heat and fire)	-	2000	-
12.3.2(Vibration test)	-	7500	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry heat test)	-	15000	-
"12.8.5(Surge Immunity Test)	-	5000	-
6.1(General)	-	2500	-
6.2(Meter Case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, Terminals Block(s) and Protective Earth Terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
6.7(Insulating Encased Meter)	-	2500	-
6.10(Display of Measured Values)	-	2500	-
9.6 & 12.17(Immunity to Earth/Phase Fault)	-	3000	-
6.11(Output Device)	-	2500	-
9.4 & 12.7.5(Influence of Heating)	-	4500	-
7.1(Name Plate)	-	2500	-
7.2(Connections, Diagrams and Terminal Marking)	-	2500	-
11.2("Phase of Auxiliary supply voltage by 120 degree")	-	1000	-
11.2(Auxiliary voltage ± 15 percent)	-	1000	-
12.15(Interpretation of Test Results)	-	1500	-
11.4.1(Initial Start-up of the Meter)	-	1500	-
6(General and Constructional requirements)	-	2500	-
6.1(General)	-	2500	-
6.2(Meter case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminals block(s) and protective earth terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
6.6(Clearance and creepage distances)	-	2500	-
6.7()	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
7.1 a)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 b)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 c)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 d)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 e)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 f)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 g)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 h)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 j)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 k)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 m)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 n)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 p)(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1.1(BIS certification Marking)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
8(Climatic Conditions)	-	0	-
9.3 & 12.7.4(Influence of Self-heating)	-	3000	-
9.2.3 & 12.7.3(Short Time Over Current)	-	3000	-
9.2.2 & 12.7.2(Influence of Supply Voltage)	-	4500	-
9.1 & 12.7.1(Power Consumption)	-	3000	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry Heat Test)	-	15000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.8, 12.4(Test of Resistance to Heat and Fire)	-	2000	-
12.4, 6.8(Test of Resistance to Heat and Fire)	-	2000	-
12.3.1(Shock Test)	-	5000	-
12.3.2(Vibration Test)	-	7500	-
12.3.3(Spring Hammer Test)	-	1000	-
11.7, 12.16(Repeatability of Error Test)	-	5500	-
11.6, 12.14(Meter Constant)	-	1500	-
11.5, 12.13(Test of Starting Conditions)	-	1500	-
11.4, 12.12(Test of No-Load Condition)	-	1500	-
11.3, 12.11(Test of Ambient Temperature Influence)	-	6000	-
11.2, 12.10(Limits of error due to other Influence Quantities)	-	12500	-
12.15(Limits of Error and Interpretation or Test Results)	-	12500	-
11.1(Limits of error due to variation of the current)	-	12500	-
10.1, 12.8.4(Fast Transient Burst Test)	-	6000	-
12.8.4, 10.1(Fast Transient Burst Test)	-	6000	-
10.1, 12.8.5(Surge Immunity test)	-	5000	-
9.5, 12.7.6.2(Impulse voltage test)	-	4000	-
11.3 & 12.11(Limits of Error Due to Ambient Temperature Variation)	-	12500	-
11.6 & 12.14(Meter Constant)	-	1500	-
11.7 & 12.16(Repeatability of Error Test)	-	5500	-
12.13 & 11.5(Starting Current)	-	1500	-
11.4.2 & 12.12(Running with No-Load)	-	1500	-
9.5, 12.7.6.3(ac Voltage test)	-	2500	-
9.5 & 12.7.6.2(Impulse voltage test)	-	4000	-
9.5 & 12.7.6.3(a.c. voltage test)	-	2500	-
9.6, 12.17(Test of Immunity to Earth/Phase Fault)	-	3000	-
9.4, 12.7.5(Test of Influence of Heating)	-	4500	-
11.2(Electrical fast transient burst)	-	6000	-
11.2(‘Abnormal’ ac magnetic induction of external origin 10 mT)	-	3750	-
11.2(Continuous ‘abnormal’ magnetic induction of external origin)	-	3750	-
11.2(Magnetic induction of external origin 0.5 mT)	-	3750	-
11.2(Continuous magnetic induction of external origin)	-	3750	-
11.2(Voltage unbalance)	-	3000	-
11.2(Reversed phase sequence)	-	3000	-
11.2(Wave form: 10 percent of third harmonic in the current)	-	3000	-
11.2(Frequency variation)	-	3000	-
11.2(Voltage variation)	-	3000	-
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	-
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	-
12.7.6.4, 9.5()	-	1500	-
9.5, 12.7.6.4()	-	1500	-
12.9.1(Test of Accuracy Requirements : General Test Conditions)	-	0	-
9.1, 12.7.1(Test of Power Consumption)	-	3000	-
9.2.1(Test of Influence of Supply Voltage)	-	4500	-
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	4500	-
9.2.3 12.7.3(Test of Influence of Short-time Overcurrents)	-	3000	-
9.3, 12.7.4(Test of Influence of Self-Heating)	-	3000	-

08 May, 2028

-
Exclusions -12.8.6 (Radio Interference Measurement), 12.8.3 (Test for Immunity to Electromagnetic HF Fields), Test for Immunity to Electrostatic Discharge (ESD), 11.2 (Electromagnetic HF fields), 10.1, 12.8.2 (Test for Immunity to Electrostatic Discharge (ESD)), 12.8.2, 10.1 (Test for Immunity to Electrostatic Discharge (ESD)), 10.1, 12.8.3 (Test for immunity to electromagnetic HF field), 12.8.3, 10.1 (Test for immunity to electromagnetic HF field), 12.8.6, 10.2 (Radio Interference Measurement), 10.2, 12.8.6 (Radio Interference Suppression)

6485

Elenergy Lab Research Pvt. Ltd., Bengaluru

6185426

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

Class 1 & 2 5A to 120A

209000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.12(Test of meter constant)	-	2000	-
6.10.6(ac high voltage test)	-	2500	-
6.10.6(Insulation resistance test)	-	1500	-
6.12(Test of ambient temperature influence)	-	7500	-
6.10.5(Test of influence of heating)	-	4500	-
6.10.7(Test of influence of immunity to earth fault)	-	3000	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	5500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	5500	-
6.12(DC & Even Harmonics in the ac current circuit)	-	8000	-
6.12(Frequency Variation)	-	4000	-
6.12(Magnetic induction of External Origin 0.5mT)	-	5500	-
6.12(Reversed Phase Sequence)	-	4000	-
6.12(Voltage Unbalanced)	-	4000	-
6.12(Waveform 10% of 3rd Harmonics)	-	4000	-
6.10.1(Test of influence of short time over currents)	-	3000	-
6.12(Test of repeatability of error )	-	7500	-
6.12(Test on limits of error due to variation of the current)	-	15000	-
6.10.6(Impulse voltage test)	-	4000	-
6.3(Clearance and creepage distances)	-	2500	-
6.11(Surge Immunity test)	-	5000	-
6.10.4(Test of influence of self-heating)	-	3000	-
6.12(Test of no-load condition)	-	2000	-
6.10.1(Test of power consumption)	-	3000	-
6.12(Test of starting condition)	-	2000	-
6.10.1(Test of influence of supply voltage)	-	4500	-
6.9(Damp heat cyclic test)	-	25000	-
6.5(Protection against penetration of dust and water)	-	6000	-
6.5(Shock test)	-	5000	-
6.5(Spring Hammer test)	-	1000	-
6.5(Test of resistance to heat and fire)	-	2000	-
6.5(Vibration test)	-	7500	-
6.9(Cold test)	-	15000	-
6.9(Dry heat test)	-	15000	-
6.11(Fast transient burst test)	-	6000	-
cl. 12.7.6.2 of IS 13779(Impulse voltage test)	-	4000	-
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	2500	-
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	1500	-
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	15000	-
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	15000	-
cl. 11.3 of IS 13779(Limits of Error Due to Ambien! Temperature Variation )	-	15000	-
cl. 11.4 of IS 13779(Starting and Running w'th No-Load)	-	2000	-
cl. 11.5 of IS 13779(Starting Current)	-	2000	-
cl. 11.6 of IS 13779(Meter Constant)	-	2000	-
cl 11.1 of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	15000	-
12.15 of IS 13779(Test of Meter Constant/Registration)	-	2000	-
12.14 of IS 13779(Test of Starting Conditions)	-	2000	-
12.13 of IS 13779(Test of No-Load Condition)	-	2000	-
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	7500	-
12.17 of IS 13779(Repeatability of Error Test )	-	7500	-
12.7.1 of IS 13779(Test of Power Consumption)	-	3000	-
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	4500	-
12.7.3 of IS 13779( Test of Influence of Short-time Overcurrents)	-	3000	-
12.7.4 of IS 13779(Test of Influence of Self-Heating)	-	3000	-
12.7.5 of IS 13779(Test of Influence of Heating)	-	4500	-
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	3000	-
12.9.4 of IS 13779(FastTransient BurstTest)	-	6000	-
12.6.1 of IS 13779(Dry Heat Test)	-	15000	-
12.6.2 of IS 13779(Cold Test)	-	15000	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	25000	-
12.3.1 of IS 13779(Shock Test)	-	5000	-
12.3.2 of IS 13779(Vibration Test)	-	7500	-
12.3.3 of IS 13779( Spring Hammer Test)	-	1000	-
12.5 a) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5 b) of IS 13779(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	2000	-
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	3000	-
4.4.4 of IS 15844(Influence of Self-Heating)	-	3000	-
4.4.5 of IS 15844(Influence of Heating)	-	4500	-
6.7(Output device)	-	2500	-
6.6(Display of measured values)	-	2500	-
6.2.2(Insulating encased meter)	-	2500	-
6.2.2(Terminal Cover(s))	-	2500	-
6.2.1(Heat Deflection Test)	-	2500	-
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	2500	-
6.2(Communication module Load switch)	-	2500	-
6.2(Window)	-	2500	-
6.2(Meter case)	-	2500	-
6.2(General and constructional requirements)	-	2500	-
6.2(General constructional Requirement)	-	2500	-
6.2(General constructional Requirement)	-	2500	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:1999(Limits of error due to other influence quantities)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.11.1 and Table 17 of IS 13779:1999(Limits of Error and Interpretation or Test Results)	-	15000	-
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	2500	-
12.10.1 a) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 b) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 c) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 d) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 e) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.10.1 f) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	0	-
12.11 of IS 13779(Test of Iniluence Quantities)	-	31500	-
4.4.2.1 of IS 15844(Voltage range)	-	0	-
4.4.2.2 of IS 15844( Specified operating range )	-	0	-
4.4.2.3 of IS 15844(Extended operating range)	-	0	-
4.4.2.4 of IS 15844( Limit range of operation)	-	0	-
4.4.2.5 of IS 15844(Withstand range)	-	0	-
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	0	-
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	0	-
4.4.6 of IS 15844(Insulation)	-	0	-
6.8(BIS Standard Mark)	-	0	-
6.8(Marking of smart meters Name plate)	-	0	-
11.0(Smart meter functional requirements)	-	0	-
9, 10.6(Test of Smart Meter Communicability)	-	0	-
10.3(Test of Display)	-	0	-
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	0	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	0	-
7.2, 10.4(Dielectric strength (G-8))	-	0	-
7.2, 10.4(Minimum switched current (G-7))	-	0	-
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	0	-
7.2, 10.4(Fault current making capacity (G-5))	-	0	-
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	0	-
7.2, 10.4(Electrical endurance (G-3))	-	0	-
7.2, 10.4(Normal operation (G-2))	-	0	-
Note 1c of Table 1(Remote disconnect/connect)	-	0	-
Note 1b of Table 1(Access and data read test)	-	0	-
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	0	-
6.12(Operation of Accessories)	-	0	-
6.12(Test of influence quantities)	-	31500	-
6.8.1(Additional information)	-	0	-
6.8(Connection diagrams and terminal marking)	-	0	-
Table 1 (Note 1)(Schedule of type tests)	-	0	-
Table 1 (Note 1)(Schedule of type tests)	-	0	-
10.6.2(Test for Smart meter communicability )	-	0	-
10.5(Test for Data Exchange Protocol)	-	0	-
10.4(Test for Load Switch)	-	0	-
10.3(Inspection)	-	0	-
6.8(Inspection)	-	2500	-
6.8(Inspection)	-	2500	-
6.7(Inspection)	-	2500	-
6.7(Inspection)	-	2500	-
6.6(Inspection)	-	2500	-
6.3(Measurement)	-	2500	-
11(Smart Meter Functional Requirement)	-	0	-
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.11(Electromagnetic Compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test
6.12(Voltage Variation)	-	3000	-

08 May, 2028

-
Test for Immunity to Electrostatic Discharge (ESD), Test for Immunity to Electromagnetic HF Fields, Radio Interference Measurement, Test for Immunity to Electromagnetic HF Fields, Test for Immunity to Electrostatic Discharge (ESD), Radio Interference Measurement

6486

Elenergy Lab Research Pvt. Ltd., Bengaluru

6185426

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

Class 1 & 2 5A to 120A

198500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6.5(As per cl 4.6.5)	-	2000	-
5.4.6.3(Table 15, power source 500 VA)	-	2500	-
5.4.6.4(500±50V dc)	-	1500	-
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	15000	-
5.4.5(As per cl 4.4.5)	-	4500	-
4.6.2(As per table 12)	-	50000	-
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	6000	-
5.4.3(Table 8, as per cl4.4.3)	-	3000	-
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	7500	-
4.6.1(As per table 10 & 11, cl 5.6.1)	-	15000	-
5.4.6.2(12.7.6.2 of IS 13779)	-	4000	-
4.2.6(By measurement)	-	2500	-
5.5.6(according to IEC 61000- 4-5)	-	5000	-
5.4.4(Table 9, and cl 4.4.4)	-	3000	-
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	2000	-
5.4.1(As per 4.4.1.1)	-	3000	-
5.6.4(As per cl 4.6.3, Table 13)	-	2000	-
5.4.2(As per 4.4.2.1)	-	4500	-
5.3.3(As per cl 5.4.6)	-	25000	-
5.2.5(Protection against penetration of dust (IP5X))	-	6000	-
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	1000	-
5.2(Test of mechanical requirements)	-	21500	Mention testing charges for the Test for Mechanical Requirements, including the Vibration test, Shock test, Spring hammer test, Protection against penetration of dust and water,Test of resistance to heat and fire
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	2000	-
5.2.3(As per IS 9000 (Part 8))	-	7500	-
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	15000	-
4(General Requirements)	-	0	-
4.1.1(By Inspection)	-	0	-
4.1.2(By Inspection)	-	0	-
4.1.3(By Inspection)	-	0	-
4.1.4(By Inspection)	-	0	-
4.2(Mechanical Requirements)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.1(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.2(By Inspection)	-	2500	-
4.2.3(By Inspection)	-	2500	-
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By inserting copper conductor of appropriate size)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.4(By Inspection)	-	2500	-
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	2500	-
4.2.5(The terminals their fixing screws, a suitable length of external insulated conductor and its insulation shall be enclosed by a cover with a provision for sealing. )	-	2500	-
4.2.5(The fixing screws used on the terminal cover for fixing and sealing shall be held captive in the terminal cover.)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.6(By measurement)	-	2500	-
4.2.7(Standard test fingure)	-	2500	-
4.2.10(Display of measured values)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.1(By inspection)	-	2500	-
4.2.10.2(By inspection)	-	2500	-
4.2.10.3(By measurement)	-	2500	-
4.2.10.4(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.5(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.6(By inspection)	-	2500	-
4.2.10.7(By inspection)	-	2500	-
4.2.10.7(By inspection)	-	2500	-
4.2.10.8(Fig. 4, annexure F)	-	2500	-
4.2.10.9(Fig. 5, annexure F)	-	2500	-
4.2.10.9(Fig. 5, annexure F)	-	2500	-
4.2.11(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
4.2.11.1(By inspection)	-	2500	-
5.4.6(As per IS 2071 (Part1))	-	0	-
4.6.6.2 , annexure G -8(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -7(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -6(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -5(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -4(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -3(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 , annexure G -2(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	0	-
4.6.6.2 .1(Load switching capability)	-	0	-
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	0	-
4.2.12(Test on Token Carrier Interface)	-	0	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of error due to other influence quantities)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
Cl.4.6.2 and Table 12 of IS 15884:2010(Limits of Error and Interpretation or Test Results)	-	15000	-
6(Functional Requirements)	-	0	-
Annexure A(Functional Performance)	-	0	-
4.2.12.3(Keypad Interface)	-	0	-
4.2.10.9(General requirements- Optical characteristics)	-	0	-
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	0	-
5.8(Test of Load Switch)	-	0	-
5.9(Test of Consumption-Based charging function)	-	0	-
5.10(Test of Time-Based charging function)	-	0	-
4.6.6.2.2(Performance requirement for load switching Utilization category UC2 (Annex G.))	-	0	-
4.6.6.2.2 & G2(Normal operation)	-	0	-
4.6.6.2.2 & G3(Electrical endurance)	-	0	-
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	0	-
4.6.6.2.2 & G5(Fault current making capacity)	-	0	-
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	0	-
4.6.6.2.2 & G7(Minimum switched current)	-	0	-
4.6.6.2.2 & G8(Dielectric strength)	-	0	-
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	0	-
4.2.5(When the meter is mounted on the meter board, no access to the terminals shall be possible without breaking the seal of the terminal cover.)	-	0	-
5.4.6.2(12.7.6.2 of IS 13779)	-	4000	-
5.6(As per cl 4.6)	-	0	-
5.4(As per 5.6.1)	-	0	-
4.4.2(Table 7)	-	0	-
5.3(Tests of Climatic Influences)	-	0	-
5.5.6(according to IEC 61000- 4-5)	-	5000	-
5.5.6(Surge Immunity Test)	-	5000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	25000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	25000	-
5.3.3(Visual examination)	-	25000	-
5.2.1(As per cl 12.3.3 of IS 13779)	-	1000	-
5.2.5(As per IS 12063)	-	6000	-
5.2.5(500 V dc)	-	6000	-
5.2.5(Protection against penetration of water (IP1X))	-	6000	-
5.2.5(As per IS 12063)	-	6000	-
5.2.5(500 V dc)	-	6000	-
4.6.3(Limits of error due to Ambient temperature Variation)	-	15000	-
5.5(Test of electromagnetic compatibility)	-	11000	Mention testing charges for the Test for Electromagnetic Compatibility, including the Fast transient burst test, Surge Immunity Test.
5.4.4(Table 9, and cl 4.4.4)	-	3000	-
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	4000	-

08 May, 2028

-
Radio Interference Measurement, Test for Immunity to Electromagnetic HF Fields, Test for Immunity to Electrostatic Discharge (ESD), Test for Immunity to Electrostatic Discharge (ESD)

6487

MS TESTING LABORATORY LLP

8187716

IS 14314 (1995)

Thtnner,general purpose,for synthetic paints and varnishes - Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1, Clause 4.2, Table 1 (Sr.No. x)(Keeping Quality (Copper corrosion))	-	500	Keeping quality test report will be done after 12 months
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ix)(Keeping Quality (Water content))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii)(Keeping Quality (Hydrocarbon content))	-	800	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii)(Keeping Quality (Residue on evaporation))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi)(Keeping Quality (Flash point (Abel)))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v)(Keeping Quality (Distillation range))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv)(Keeping Quality (Relative density at 27 °C))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii)(Keeping Quality (Spot test))	-	200	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii)(Keeping Quality (Odour))	-	200	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i)(Keeping Quality (Colour))	-	500	-
Clause 4.2, Table 1 (Sr.No. x)(Copper corrosion)	-	500	-
Clause 4.2, Table 1 (Sr.No. ix)(Water content)	-	500	-
Clause 4.2, Table 1 (Sr.No. viii)(Hydrocarbon content)	-	800	-
Clause 4.2, Table 1 (Sr.No. vii)(Residue on evaporation)	-	500	-
Clause 4.2, Table 1 (Sr.No. vi)(Flash point (Abel))	-	500	-
Clause 4.2, Table 1 (Sr.No. v)(Distillation range)	-	500	-
Clause 4.2, Table 1 (Sr.No. iv)(Relative density at 27 °C)	-	500	-
Clause 4.2, Table 1 (Sr.No. iii)(Spot test)	-	200	-
Clause 4.2, Table 1 (Sr.No. ii)(Odour)	-	200	-
Clause 4.2, Table 1 (Sr.No. i)(Colour)	-	500	-

28 Aug, 2028

-
-

6488

Elenergy Lab Research Pvt. Ltd., Bengaluru

6185426

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

Class 1 & 2 5A to 120 A

186500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.15 & 11.6(Test of meter constant)	-	1500	-
12.7.6.3(ac high voltage test)	-	2500	-
12.7.6.4(Insulation resistance test)	-	1500	-
12.12 & 11.3(Test of ambient temperature influence)	-	6000	-
12.7.5(Test of influence of heating)	-	4500	-
12.8(Test of immunity to earth/phase fault)	-	3000	-
12.11, 11.2(Test of Influence Quantities)	-	35000	-
12.7.3(Test of influence of short time over currents)	-	3000	-
12.17, 11.7(Repeatability of Error Test)	-	5500	-
11.1(Test on limits of error due to variation of current)	-	12500	-
12.7.6.2(Impulse voltage test)	-	4000	-
6.6(Clearance and creepage distances)	-	2500	-
12.9.5, 10.1(Surge Immunity test)	-	5000	-
12.7.4(Test of Influence of self heating)	-	3000	-
12.13, 11.4(Test of No-Load Condition)	-	1500	-
12.7.1(Test of power consumption)	-	3000	-
12.14, 11.5(Test of Starting Conditions)	-	1500	-
12.7.2(Voltage dip of Vref=50% Dip time: 1 min Number of dips: 1)	-	3000	-
12.6.3(Damp Heat Cycle Test)	-	25000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.3.1(Shock test)	-	5000	-
12.3.3(Spring hammer test)	-	1000	-
12.4(Test of resistance to heat and fire)	-	2000	-
12.3.2(Vibration Test)	-	7500	-
12.6.2(Cold Test)	-	15000	-
12.6.1(Dry heat test)	-	15000	-
12.9.4, 10.1(Fast Transient Burst Test)	-	6000	-
6.1(General)	-	2500	-
6.2(Meter Case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminal block and protective earth terminal)	-	2500	-
6.5(Terminals covers and Extended Terminal Cover)	-	2500	-
6.7(Insulating encased meter)	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	4000	-
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	4000	-
6(General and Constructional requirements)	-	2500	-
6.1(General)	-	2500	-
6.2(Meter case)	-	2500	-
6.3(Window)	-	2500	-
6.4(Terminals, terminals block(s) and protective earth terminal)	-	2500	-
6.5(Terminal Cover(s))	-	2500	-
6.6(Clearance and creepage distances)	-	2500	-
6.7(Insulating encased meter)	-	2500	-
6.10(Display of measured values)	-	2500	-
6.11(Output device)	-	2500	-
9.5, 12.7.6.2(Impulse voltage test)	-	4000	-
12.7.6.2, 9.5(Impulse voltage test)	-	4000	-
12.7.6.3, 9.5(ac Voltage test)	-	2500	-
9.5, 12.7.6.3(ac Voltage test)	-	2500	-
12.7.6.4, 9.5(Insulation resistance test)	-	1500	-
9.5, 12.7.6.4(Insulation resistance test)	-	1500	-
12.7.1, 9.1(Test of Power Consumption)	-	3000	-
9.1, 12.7.1(Test of Power Consumption)	-	3000	-
9.2.1(Test of Influence of Supply Voltage)	-	4500	-
12.7.2, 9.2.2(Test of Influence of Supply Voltage)	-	4500	-
9.2.2, 12.7.2(Test of Influence of Supply Voltage)	-	4500	-
12.7.3, 9.2.3(Test of Influence of Short-time Overcurrents)	-	3000	-
9.2.3, 12.7.3(Test of Influence of Short-time Overcurrents)	-	3000	-
12.7.4, 9.3(Test of Influence of Self-Heating)	-	3000	-
9.3, 12.7.4(Test of Influence of Self-Heating)	-	3000	-
12.7.5, 9.4(Test of Influence of Heating)	-	4500	-
9.4, 12.7.5(Test of Influence of Heating)	-	4500	-
12.8, 9.6(Test of Immunity to Earth/Phase Fault)	-	3000	-
9.6, 12.8(Test of Immunity to Earth/Phase Fault)	-	3000	-
10.1, 12.9.4(Fast Transient Burst Test)	-	6000	-
10.1, 12.9.5(Surge Immunity test)	-	5000	-
11.1(Limits of error due to variation of the current)	-	12500	-
12.16(Limits of Error and Interpretation or Test Results)	-	12500	-
11.2, 12.11(Limits of error due to other Influence Quantities)	-	12500	-
11.3, 12.12(Test of Ambient Temperature Influence)	-	6000	-
12.12, 11.3(Test of Ambient Temperature Influence)	-	6000	-
11.4, 12.13(Test of No-Load Condition)	-	1500	-
11.5, 12.14(Test of Starting Conditions)	-	1500	-
11.6, 12.15(Meter Constant)	-	1500	-
12.15, 11.6(Test of Meter Constant/Registration)	-	1500	-
11.7, 12.17(Repeatability of Error Test)	-	5500	-
12.3.1(Shock Test)	-	5000	-
12.3.3(Spring Hammer Test)	-	1000	-
6.8, 12.4(Test of Resistance to Heat and Fire)	-	2000	-
12.4, 6.8(Test of Resistance to Heat and Fire)	-	2000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.5, 6.9(Test of Protection Against Penetration of Dust and Water)	-	6000	-
6.9, 12.5(Test of Protection Against Penetration of Dust and Water)	-	6000	-
12.6.1(Dry Heat Test)	-	15000	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
AC static watihour meters, class 1 and 2 - Specification (First Revision)(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of error due to other influence quantities)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
Cl.11.2 and Table 17 of IS 13779:2020(Limits of Error and Interpretation or Test Results)	-	12500	-
7.1 a)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 b)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 c)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 d)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 e)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 f)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 g)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 h)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 j)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 k)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 m)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 n)(MARKING OF METERS : Name Plate)	-	2500	-
7.1 p)(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1(MARKING OF METERS : Name Plate)	-	2500	-
7.1.1(BIS certification Marking)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
8(Climatic Conditions)	-	0	-
12.7.6.1, 9.5(Test of insulation Properties : General test conditions)	-	0	-
9.5, 12.7.6.1(Test of insulation Properties : General test conditions)	-	0	-
12.10.1(Test of Accuracy Requirements : General Test Conditions)	-	0	-
4(Classification)	-	0	-
5.1(Standard Reference Voltages)	-	0	-
5.2(Standard Basic Currents)	-	0	-
5.3(Rated Maximum Current)	-	0	-
5.4(Standard Frequency)	-	0	-
12.16 & 11.7(Test of repeatability of error)	-	5500	-
7.1(Name Plate)	-	2500	-
7.2(Connection diagrams and terminal marking)	-	2500	-
12.14 & 11.5(Test of starting condition)	-	1500	-
12.3.2(Vibration test)	-	2500	-
12.13 & 11.4(Test of no-load condition)	-	1500	-
12.5(Test of protection against penetration of dust and water)	-	6000	-
11.2(Test on limits of error due to other influence quantities)	-	12500	-
12.6.2(Cold test)	-	15000	-
12.6.3(Damp heat cyclic test)	-	25000	-
12.9.5(Surge Immunity Test)	-	5000	-
12.7.1(Test of power consumption)	-	6000	-
12.9.4(Fast transient burst test)	-	6000	-
12.7.2(Test of influence of supply voltage)	-	4500	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	3000	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 20msec Number of interruptions: 1)	-	3000	-
12.7.6.4(Insulation resistance test)	-	1500	-

08 May, 2028

-
Exclusions -12.9.6 (Radio Interference Measurement), 12.9.3 (Test of Immunity to electromagnetic HF field), 12.9.2 (Test of Immunity to electrostatic discharge), 10.1, 12.9.2 (Test for Immunity to Electrostatic Discharge (ESD)), 12.9.2, 10.1 (Test for Immunity to Electrostatic Discharge (ESD)), 10.1, 12.9.3 (Test for immunity to electromagnetic HF field), 12.9.3, 10.1 (Test for immunity to electromagnetic HF field), 12.9.6, 10.2 (Radio Interference Measurement), 10.2, 12.9.6 (Radio Interference Measurement)

6489

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 133 (2013)

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1()	-	0	-
5.4(IS 101 (Part 1/Sec 2))	-	1000	-
5.5()	-	1000	-
5.6()	-	1000	-
5.7(IS 133Annex B.)	-	1000	-
5.8(IS 101 (Part 8/Sec 5).)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 1)	-	1000	-
Table 1 5.9,ii(IS 101 Part l/Sec 7)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 2)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 3)	-	1000	-
Table 1 5.9,iii(Part 1/Sec 5)	-	1000	-
Table 1 5.9, iv((Part 3/Sec 4))	-	1000	-
Table 1 5.9, iv(Part 4/Sec 4)	-	1000	-
Table 1 5.9,v(Part 3/Sec 5)	-	1000	-
Table 1 5.9,vi(Qualitative IS 5)	-	1000	-
Table 1 5.9,vii(Part 4/Sec 1)	-	1000	-
Table 1 Cl No 5.9 Vii(Part 4/Sec 3)	-	5000	-
Table 1 5.9,ix(IS 133Annex E.)	-	1000	-
Table 1 5.9,x(3 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,x(2 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,xi((Part 1/Sec 6))	-	1000	-
Table 1 5.9,xii((Part 8/Sec 6)	-	1000	-
Table 1 5.9,xiii(IS 133Annex F.)	-	1000	-
Table 1 5.9,xiv(Part 6/Sec 2)	-	1000	-

08 Apr, 2027

-
-

6490

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 13369 (1992)

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

101000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 11.2(IS 13369-1992, Amndt. 1 to 3)	-	500	---
Cl. 11.4(IS 13369-1992, Amndt. 1 to 3)	-	500	---
Cl. 11.5(IS 13369-1992, Amndt. 1 to 3)	-	20000	---
Cl. 11.8(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.6(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.7(IS 13369-1992, Amndt. 1 to 3)	-	40000	---
Cl. 11.9(IS 13369-1992, Amndt. 1 to 3)	-	10000	---
Cl. 11.10(IS 13369-1992, Amndt. 1 to 3)	-	10000	---

08 Apr, 2027

-
(12V & upto 200Ah capacity)

6491

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 1651 (2013)

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates) - Specification (Fourth Revision)

121500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 12.2(IS 1651-2013)	-	500	---
Cl. 12.3(IS 1651-2013)	-	500	---
Cl. 12.4(IS 1651-2013)	-	500	---
Cl. 12.5(IS 1651-2013)	-	25000	---
Cl. 12.10(IS 1651-2013)	-	5000	---
Cl. 12.9(IS 1651-2013)	-	10000	---
Cl. 12.7(IS 1651-2013)	-	5000	---
Cl. 12.8(IS 1651-2013)	-	45000	---
Cl. 12.11(IS 1651-2013)	-	5000	---
Cl. 12.12(IS 1651-2013)	-	10000	---
Cl. 12.13(IS 1651-2013)	-	15000	---

08 Apr, 2027

-
(2V/12V & upto 800Ah capacity)

6492

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.7(Markings and instructions)	-	1000	--
2.1(Protection from electric shock and energy hazards)	-	1000	---
1.6(Power interface .)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.5(Limited power sources .)	-	2000	-
2.6(Provisions for earthing and bonding)	-	5000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	5000	-
2.9(Electrical insulation)	-	2000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2000	-
3.1(General)	-	2000	-
3.2(Connection to a mains supply)	-	2000	-
4.2(Mechanical strength)	-	5000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	5000	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	2000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	5000	-
5.3(Abnormal operating and fault conditions)	-	1000	-

08 Apr, 2027

-
Excluding following tests: 1.Components (Cl. 1.5), 2.TNV Circuit (CL :2.3) 3.Moving parts (Cl. 2.8.5), 4. Switches & Relays-Overload test (Cl. 2.8.7.2), 5. Switches & Relays-Endurance test (Cl. 2.8.7.3), 6. Semiconductor devices (Cl. 2.10.5.4), 7. Insulation in wound components (Cl. 2.10.5.11), 8. Wire in wound components (Cl. 2.10.5.12), 9. Wire with solvent-based enamel in wound components (Cl.2.10.5.13), 10. Additional insulation in wound components (Cl. 2.10.5.14), 11. Construction of printed Boards( Cl.2.10.6) 12. Tests on coated printed boards and coated components sample preparation and preliminary inspection (Cl. 2.10.8.1), 13. Tests on coated printed components- Thermal Conditioning (Cl. 2.10.8.2), 14. Tests on coated printed boards & coated components- Abrasion resistance (Cl. 2.10.8.4), 15. Appliance inlets (Cl. 3.2.4), 16. Power Supply Cords (Cl. 3.2.5), 17. Mechanical strength test (Cathode ray tube) (Cl. 4.2.8), 18. Radiation (Cl. 4.3.13), 19. Conditions for a fire enclosure (Cl. 4.7.2), 20. Materials (Cl. 4.7.3), 21. Motors (Cl. 5.3.2), 22. Transformers (Cl. 5.3.3), 23. Electromechanical components (Cl. 5.3.5), 24. Simulation of faults (Cl. 5.3.7), 25. Unattended equipment (Cl.5.3.8) 26. Impulse test ( Cl.7.4.3)

6493

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	-
7(Heating under normal operating conditions)	-	5000	-
8(Constructional requirements with regard to the protection against electric shock)	-	5000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	5000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	2000	-
14(Components)	-	5000	-
15(TERMINALS)	-	1000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	5000	-

08 Apr, 2027

-
Excluding following tests: 1. Ionizing radiation test (Cl.6.1), 2. Laser radiation (Cl.6.2), 3. Requirements for Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), 4. Measurement of transient Voltage : ( Cl.13.3.4) 5. Component test (Cl.14) 6. Plug and socket( Cl.15.1) 7. External Flexile Cord (Cl.16.3), 8. Mechanical Strength of Picture Tubes for intrinsically protected Picture tubes (Cl.18.1) 9. Mechanical Strength of Picture Tubes for non-intrinsically protected Picture tubes (Cl. 18.2) 10. Electrical Component (Cl. 20.2), 11. Internal Wiring (Cl. 20.2.3), 12.Printed Boards (Cl. 20.2.4), 13.Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4 (Cl. 20.2.5); 14. Fire Enclosure ( Cl. 20.3) 15. Heat Resistance of Insulating Materials (Cl.7.2) 16. Printed Boards (Cl.13.5) 17. Remote control device held in hand (Tumbling barrel), (Cl.12.3)

6494

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Test for C 10 Capacity)	-	20000	----
12.2(Test for C 1 Capacity)	-	20000	----
12.4(Ampere Hour Efficiency)	-	10000	---
12.5(Watt Hour Efficiency)	-	10000	----
12.6(Test for Retention of Charge)	-	10000	----
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	10000	----
12.1(Endurance Life Cycle Test)	-	40000	-----

08 Apr, 2027

-
(12V/24 V upto 200Ah capacity)

6495

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

220000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Capacity test)	-	20000	----
8.2(Endurance test)	-	80000	----
8.3(Charge retention test)	-	10000	---
8.4(Cycle endurance in Photovoltaic application)	-	90000	----
8.5(Sulphation Test)	-	10000	-----
8.6(Water loss test)	-	10000	-----

08 Apr, 2027

-
(2V/12V & upto 800Ah capacity) For lead acid batteries only

6496

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 7372 (1995)

Lead - Acid storage batteries for motor vehicles - Specification (First Revision)

191500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.3 of IS 7372:1995(Physical Examination)	-	500	---
Cl 9.4 of IS 7372:1995(Dimensions and Layout)	-	500	----
Cl 9.5 of IS 7372:1995(Marking)	-	500	-----
Cl 9.6 of IS 7372:1995(Air Pressure Test)	-	10000	----
Cl 9.7 of IS 7372:1995(9.7 Capacity Test)	-	25000	----
Cl 9.8 of IS 7372:1995(Vibration Test)	-	10000	----
Cl 9.9 of IS 7372:1995(High-Rate Discharge Test at Normal Temperature)	-	15000	-----
Cl 9.10 of IS 7372:1995(High-Rate Discharge Test at Low Temperature)	-	20000	----
Cl 9.12 of IS 7372:1995(Retention of Charge Test)	-	15000	-----
Cl 9.13 of IS 7372:1995(Resistance to Overcharge Test)	-	10000	-----
Cl 9.14 of IS 7372:1995(Life Test)	-	60000	-----
Cl 9.15 of IS 7372:1995(Storage Test)	-	25000	----

08 Apr, 2027

-
(12V & upto 200Ah capacity)

6497

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	1200	Without GST
6.4(Skin Formation)	-	1200	Without GST
6.5(Thinning Properties)	-	1200	Without GST
6.6(Application Properties)	-	1200	Without GST
6.8(Lead Restriction)	-	1200	Without GST
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	1200	Without GST
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	1200	Without GST
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	1200	Without GST
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	1200	Without GST
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	1200	Without GST
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	1200	Without GST
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	1200	Without GST
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	1200	Without GST
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	1200	Without GST
6.9 Table 2 (4) a) Finish (Under coating ) )	-	1200	Without GST
6.9 Table 2 (4) a) Finish (Finishing) )	-	1200	Without GST
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	1200	Without GST
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	1200	Without GST
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	1200	Without GST
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	1200	Without GST
6.9 Table 2 (6) Colour , (Finishing))	-	1200	Without GST
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	1200	Without GST
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	3000	Without GST
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	3000	Without GST
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	3000	Without GST
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1200	Without GST
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	2000	Without GST
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	1200	Without GST
6.7.1.3(QUV apparatus)	-	10000	Without GST

08 Apr, 2027

-
-

6498

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	1500	Without GST
Cl 5.1 (b)(Composition, Driers)	-	1500	Without GST
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	1500	Without GST
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	1500	Without GST
Cl 5.1 .1 (c)(Suitable extenders)	-	2999.98	Without GST
Cl 5.1.2(Volatile vehicle)	-	1200	Without GST
Cl 5.2(Material)	-	1200	Without GST
Cl 5.3(Compatibility with Thinner, IS 1872)	-	1200	Without GST
Cl 5.4(Freedom from Objectionable Impurities)	-	1200	Without GST
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	1200	Without GST
1 (i) (a) Table 1(Consistency, Annex C)	-	1200	Without GST
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	1200	Without GST
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	1200	Without GST
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	1200	Without GST
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	1200	Without GST
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	1200	Without GST
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	1200	Without GST
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	1200	Without GST
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	1200	Without GST
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	1200	Without GST
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	1200	Without GST
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	1200	Without GST
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	3000	Without GST
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	5000	Without GST
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	5000	Without GST
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	5000	Without GST
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1200	Without GST
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	1200	Without GST

08 Apr, 2027

-
-

6499

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 16732 (2019)

Galvanized structural steel - Specification

Galvanized Structural Steel

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Supply of material)	-	22500	-
5(Grades)	-	22500	-
6(Manufacture)	-	22500	-
7.1(Black material)	-	22500	-
7.2(Galvanized steel)	-	22500	-
8.1(Ladle Analys)	-	22500	-
8.2(Product Analysis)	-	22500	-
9.1(Quality of Zinc)	-	22500	-
9.2(Mass of Zinc Coating)	-	22500	-
11.1(Tensile Test Pieces)	-	22500	-
11.2(Tensile Test)	-	22500	-
12.1(Bend Test Piece)	-	22500	-
12.2(Bend Test)	-	22500	-
13(Impact test)	-	22500	-
14(Y groove crackability test)	-	22500	-
15.1(Mass of Galvanized Coating)	-	22500	-
15.2(Determination of Uniformity of Galvanized)	-	22500	-
15.3(Thickness of Zinc Coating)	-	22500	-
15.4(Adhesion of Galvanized Coating)	-	22500	-
16(Dimensions and Tolerances)	-	22500	-
17(Fabrication and tolerances)	-	22500	-
18(Other optional test)	-	22500	-
21(Marking)	-	22500	-

31 Dec, 2026

-
Included w.e.f.22.10.2024

6500

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

Reduced blackplate

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	15000	-
6(Freedom from defects)	-	15000	-
8(Dimensions and Tolerances)	-	15000	-
Cl. 5.1, 5.2(chromium)	-	15000	-
Cl. 5.1, 5.2(silicon)	-	15000	-
Cl. 5.1, 5.2(copper)	-	15000	-
Cl. 5.1, 5.2(aluminium)	-	15000	-
Cl. 5.1, 5.2(Nitrogen )	-	15000	-
Cl. 5.1, 5.2(Phosphorus)	-	15000	-
Cl. 5.1, 5.2(Sulphur)	-	15000	-
Cl. 5.1, 5.2(Manganese)	-	15000	-
Cl. 5.1, 5.2(carbon)	-	15000	-

31 Dec, 2026

-
included w.e.f.22.10.2024

6501

Samridhi Test House Pvt. Ltd.

8184706

IS 9973 (1981)

Specification for visor for scooter helmets

6700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Impact resistance)	-	300	-
5.2(Penetration resistance)	-	400	-
5.3(Flammability)	-	600	-
5.4.1(Distortion)	-	200	-
5.4.2(Spherical&Cylindral error)	-	900	-
5.4.3(Prismatic Error)	-	900	-
5.4.4(Diffuse transmittance)	-	800	-
5.4.5(Light transmission)	-	800	-
5.5(Field of Vision)	-	800	-
7.0(Mass)	-	300	-
5.1(Impact resistance)	-	0	Repeated Test
5.2(Penetration resistance)	-	0	Repeated Test
5.3(Flammability)	-	0	Repeated Test
5.4.1(Distortion)	-	0	Repeated Test
5.4.2(Spherical&Cylindral error)	-	0	Repeated Test
5.4.3(Prismatic Error)	-	0	Repeated Test
5.4.4(Diffuse transmittance)	-	0	Repeated Test
5.4.5(Light transmission)	-	0	Repeated Test
5.5(Field of Vision)	-	0	Repeated Test
7.1(Mass)	-	0	Repeated Test
3(Materials)	-	200	-
4(Design)	-	200	-
6.1(Workmanship and Finish)	-	100	-
5.2.2(Cradle)	-	0	This clause Number is not mentioned in the standard.

09 Apr, 2028

-
-

6502

Unique Test House

9134536

IS 14845 (2000)

Resilient seated cast iron air relief valves for water works purposes - specification

ALL TYPES / ALL SIZES

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 3)&(Cl5)(Type & Nom Size)	-	200	-
(Cl 3)&(Cl5)(Type & Nom Size)	-	200	-
(Cl 3)&(Cl5)(Type & Nom Size)	-	300	-
(Cl 4)(Nom.Pressures)	-	200	-
(Cl 8)(End Connection)	-	200	-
(Cl 8)(End Connection)	-	200	-
(Cl 8)(End Connection)	-	200	-
(Cl 9)(Material)	-	200	-
(Cl10.1)( Design And Manufacture)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.2)( Body)	-	200	-
(Cl10.3)( Covers of Large Orifice Chamber)	-	300	-
(Cl10.4)(High Pressure Orifice)	-	300	-
(Cl10.4)(High Pressure Orifice)	-	500	-
(Cl10.4)(High Pressure Orifice)	-	500	-
(Cl10.4)(High Pressure Orifice)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.5, Table 3)(Float)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl10.6)(Low Pressure Seat Ring)	-	500	-
(Cl 10.7)(Joint Supporting Ring)	-	500	-
(Cl 10.8)(Cowl)	-	200	-
(Cl 10.8)(Cowl)	-	200	-
(Cl 10.9)(Gasket or jointing material )	-	100	-
(Cl10.6)(Nut & Bolts)	-	100	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
Cl 10.11(Built- in-isolating Valve)	-	500	-
(Cl.11)(Finish)	-	200	-
(Cl.12)(Testing and Performance)	-	500	-
(Cl.12)(Testing and Performance)	-	500	-
(Cl.12)(Testing and Performance)	-	500	-
(Cl.12.4.4) : (Body Test )	-	2000	-
(Cl.14)(Coating)	-	500	-
(Cl.14)(Coating)	-	500	-

07 Sep, 2028

-
Included w.e.f 24.10.2024

6503

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

steel strip

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	15000	-
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	15000	-
5.2(Tensile Test-1608:Part 1)	-	15000	-
5.2(Tensile Strength, Mpa)	-	15000	-
5.2(Elongation, %)	-	15000	-
5.3(Bend Test-1599)	-	15000	-
7.1(Freedom from defects)	-	15000	-
8.2(Width)	-	15000	-
8.2(Thickness)	-	15000	-
10(Marking)	-	15000	-
9.1(Finishing & Packing)	-	15000	-

31 Dec, 2026

-
included w.e.f.22.10.2024

6504

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

mild steel wire

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 5.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
6(FREEDOM FROM DEFECTS)	-	15000	-
7.1(i)Ultimate Tensile Strength,)	-	15000	-
7.2(ii) Reverse Torsion Test)	-	15000	-
7.3(iii) Crushing Test)	-	15000	-
8( DIMENSIONS AND TOLERANCES)	-	15000	-

31 Dec, 2026

-
included w.e.f.22.10.2024

6505

Samridhi Test House Pvt. Ltd.

8184706

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	100	-
4.5(Metal Parts)	-	800	-
4.6(Visor)	-	0	-
6.1(General)	-	100	-
6.2(Shell)	-	100	-
6.3(Protactive Padding)	-	200	-
6.4(Retention System)	-	300	-
6.7(Peripheral Vision)	-	500	-
6.8(Workmanship and Finish)	-	300	-
7.0(Tests for Helmets)	-	10600	-
7.2(Impact Absorption Test)	-	1500	-
7.3(Rigidity Test)	-	500	-
7.4(Projections and Surface Friction Test)	-	1500	-
7.5(Dynamic Test of Retention System)	-	500	-
7.6(Audibility Test)	-	900	-
7.5(Tests for Helmets)	-	0	Repeated Test
7.4(Tests for Helmets)	-	0	Repeated Test
7.3(Tests for Helmets)	-	0	Repeated Test
7.2(Tests for Helmets)	-	0	Repeated Test
7(Tests for Helmets)	-	0	Repeated Test
6.8(Workmanship and Finish)	-	0	Repeated Test
6.7(Constructional Requirements)	-	0	Repeated Test
6.4(Constructional Requirements)	-	0	Repeated Test
6.3(Constructional Requirements)	-	0	Repeated Test
6.2(Constructional Requirements)	-	0	Repeated Test
6.1(Constructional Requirements)	-	0	Repeated Test
5(Size)	-	100	-
4.6(Material)	-	0	Repeated Test
4.5(Material)	-	0	Repeated Test
4.1(Material)	-	0	Repeated Test
7.7(Retention Test of Helmet)	-	1000	-
7.8(Micro-Slip Test of the Chin Strap)	-	1000	-
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1000	-
7.10.1(Inadvertent Release by Pressure)	-	1000	-
7.10.2(Ease of Release)	-	500	-
7.10.3(Tests for Helmets)	-	1200	-
7.10.2(Tests for Helmets)	-	0	Repeated Test
7.10.1(Tests for Helmets)	-	0	Repeated Test
7.9(Tests for Helmets)	-	0	Repeated Test
7.7(Tests for Helmets)	-	0	Repeated Test
7.6(Tests for Helmets)	-	0	Repeated Test
7.10.3(Durability of Quick Release Mechanism)	-	0	Repeated Test
7.8(Tests for Helmets)	-	0	Repeated Test

09 Apr, 2028

-
-

6506

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

15000 View breakup
Rs. 15000/-

Clause No.	Exclusion	Remark
4(Designation Of Cells and Batteries, IS 8144)	-	All Test - Facility Available
5(Dimensions, IS 8144)	-	All Test - Facility Available
6.1(Terminals, IS 8144)	-	All Test - Facility Available
7.1(Requirements, IS 8144)	-	All Test - Facility Available
7.2(Requirements, IS 8144)	-	All Test - Facility Available
7.3(Requirements, IS 8144)	-	All Test - Facility Available
8.1(Marking- Cl. 4.1.6, IS 6303)	-	All Test - Facility Available
8.2(Marking, IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test, IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Flash light), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Digital audio), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Radio/clock), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Remote control), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Motor/toy), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Tape recorder), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Pulse test), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Portable lighting), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	All Test - Facility Available
9.4(Initial Life Test, IS 8144)	-	All Test - Facility Available
9.5(Delayed Life Test, IS 8144)	-	All Test - Facility Available
9.6(Leakage Test, IS 8144)	-	All Test - Facility Available
9.7(Delayed life test under dry heat conditions, IS 8144)	-	All Test - Facility Available
9.7(Delayed life test under dry heat conditions, IS 8144)	-	All Test - Facility Available

31 Dec, 2026

-
Included w.e.f. 18.03.2024

6507

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 15652 (2006)

Insulating mats for electrical purposes - Specification

15000 View breakup
-

Clause No.	Exclusion	Remark
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	-
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	-
10.a)(Packing)	-	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	-
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	-
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	-
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	-
8(Thermal Properties (Cl..8.4))	-	-
8(Thermal Properties (Cl..8.4))	-	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	-
8(Extreme Low Temperature (Cl.8.6))	-	-

31 Dec, 2026

-
Included w.e.f. 18.03.2024

6508

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

17800 View breakup
-

Clause No.	Exclusion	Remark
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	All Test Facility Available
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	All Test Facility Available
"Cl. 11 IS 4159:2021"(Heating)	-	All Test Facility Available
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	All Test Facility Available
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	All Test Facility Available
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	All Test Facility Available
"Cl. 18 IS 4159:2021"(Endurance)	-	All Test Facility Available
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	All Test Facility Available
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	All Test Facility Available
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	All Test Facility Available
"Cl. 22 IS 4159:2021"(Construction)	-	All Test Facility Available
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	All Test Facility Available
"Cl. 24 IS 4159:2021"(Components)	-	All Test Facility Available
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	All Test Facility Available
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	All Test Facility Available
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	All Test Facility Available
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	All Test Facility Available
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	All Test Facility Available
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	All Test Facility Available
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	All Test Facility Available
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	All Test Facility Available

31 Dec, 2026

-
-

6509

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

18900 View breakup
-

Clause No.	Exclusion	Remark
8(Protection against live parts)	-	10% discount is allowed to the repeat customers within One year
10(POWER INPUT AND CURRENT)	-	10% discount is allowed to the repeat customers within One year
11(HEATING)	-	10% discount is allowed to the repeat customers within One year
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	10% discount is allowed to the repeat customers within One year
14(TRANSIENT OVERVOLTAGES)	-	10% discount is allowed to the repeat customers within One year
15(MOISTURE RESISTANCE)	-	10% discount is allowed to the repeat customers within One year
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	10% discount is allowed to the repeat customers within One year
19(ABNORMAL OPERATION)	-	10% discount is allowed to the repeat customers within One year
20(STABILITY AND MECHANICAL HAZARDS)	-	10% discount is allowed to the repeat customers within One year
21(MECHANICAL STRENGTH)	-	10% discount is allowed to the repeat customers within One year
22(CONSTRUCTION)	-	10% discount is allowed to the repeat customers within One year
23(INTERNAL WIRING)	-	10% discount is allowed to the repeat customers within One year
24(COMPONENTS)	-	10% discount is allowed to the repeat customers within One year
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	10% discount is allowed to the repeat customers within One year
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	10% discount is allowed to the repeat customers within One year
27(PROVISION FOR EARTHING)	-	10% discount is allowed to the repeat customers within One year
28(SCREWS AND CONNECTIONS)	-	10% discount is allowed to the repeat customers within One year
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10% discount is allowed to the repeat customers within One year
30(RESISTANCE TO HEAT AND FIRE)	-	10% discount is allowed to the repeat customers within One year
31(RESISTANCE TO RUSTING)	-	10% discount is allowed to the repeat customers within One year

31 Dec, 2026

-
Included w.e.f. 18.03.2024 Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Voltage dips and interruptions)

6510

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

18500 View breakup
-

Clause No.	Exclusion	Remark
8(Protection against live parts)	-	10% discount is allowed to the repeat customers within One year
10(POWER INPUT AND CURRENT)	-	10% discount is allowed to the repeat customers within One year
11(HEATING)	-	10% discount is allowed to the repeat customers within One year
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	10% discount is allowed to the repeat customers within One year
14(TRANSIENT OVERVOLTAGES)	-	10% discount is allowed to the repeat customers within One year
15(MOISTURE RESISTANCE)	-	10% discount is allowed to the repeat customers within One year
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	10% discount is allowed to the repeat customers within One year
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	10% discount is allowed to the repeat customers within One year
18(ENDURANCE)	-	10% discount is allowed to the repeat customers within One year
19(ABNORMAL OPERATION)	-	10% discount is allowed to the repeat customers within One year
20(STABILITY AND MECHANICAL HAZARDS)	-	10% discount is allowed to the repeat customers within One year
21(MECHANICAL STRENGTH)	-	10% discount is allowed to the repeat customers within One year
22(CONSTRUCTION)	-	10% discount is allowed to the repeat customers within One year
23(INTERNAL WIRING)	-	10% discount is allowed to the repeat customers within One year
24(COMPONENTS)	-	10% discount is allowed to the repeat customers within One year
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	10% discount is allowed to the repeat customers within One year
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	10% discount is allowed to the repeat customers within One year
27(PROVISION FOR EARTHING)	-	10% discount is allowed to the repeat customers within One year
28(SCREWS AND CONNECTIONS)	-	10% discount is allowed to the repeat customers within One year
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10% discount is allowed to the repeat customers within One year
30(RESISTANCE TO HEAT AND FIRE)	-	10% discount is allowed to the repeat customers within One year
31(RESISTANCE TO RUSTING)	-	10% discount is allowed to the repeat customers within One year
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	10% discount is allowed to the repeat customers within One year

31 Dec, 2026

-
Included w.e.f. 18.03.2024 Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Injected currents), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number