BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6571

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16390 (2015)

Agro textiles - Nylon knitted seamless gloves for tobacco harvesters - Specification

18350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Yarn)	-	4200	-
4.2(Gloves)	-	1250	-
4.3(Freedom from Defects)	-	200	-
5.1(Dimensions and Mass)	-	2400	-
5.2(Wales and Courses)	-	300	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	200	-
6.1.1(difference of 1.0 cm in the overall length permissible while pairin Quantitative)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
6.1.1(difference of 1.0 cm in the overall length permissible while pairin Quantitative)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
Cl-5.3, Table-4 (i)(Dimensional change (due to relaxation), percent, Max)	-	350	-
Cl-5.3, Table-4 (ii)(pH value of aqueous extract)	-	350	-
Cl-5.3, Table-4 (iii)(Scouring loss, percent, max)	-	650	-
Cl-5.3, Table-4 (iv)(Glove finger dexterity, s, Max)	-	200	-
Cl-5.3, Table-4 (v)(Dimensional change due to washing, percent, Max a) Lengthwise)	-	250	-
Cl-5.3, Table-4 (v)(Dimensional change due to washing, percent, Max : b) Widthwise)	-	0	-
Cl-5.3, Table-4 (vi)(Abrasion resistance with zero emery paper at a pressure of 9 kpa for 700 cycles)	-	1200	-
Cl-5.3, Table-4 (vii)(Water vapour permeability, g/m2/day)	-	6800	-

-
Included w.e.f 04.03.2025 Exclusion: Cl 4.2.1 (The gloves shall be of the design), Cl 5.4 (Sealed Sample),Cl 5.4.1 (The custody of the sealed), Cl 9.1 (Lot),Cl 9.1.1 (The conformity of the lot), Cl 9.2 (Unless otherwise)

6572

Sipra labs Ltd., Hyderabad

6117916

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	-
Cl-5.2.2(Coliform)	-	150	-
Cl-5.2.3(Faecal streptococci)	-	375	-
Cl-5.2.3(Staphylococcus aureus)	-	375	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	150	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	300	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	150	-
Cl-5.2.7(Yeast and mould)	-	150	-
Cl-5.2.8(Salmonella)	-	675	-
Cl-5.2.8(shigella)	-	675	-
Cl-5.2.9(Vibrio cholera)	-	450	-
Cl-5.2.9(V.parahaemolyticus)	-	450	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	37.5	-
Cl-5.3, Table-1 (ii)(Odour)	-	37.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	37.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	37.5	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	75	-
Cl-5.3, Table-1 (vi)(pH)	-	37.5	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	75	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	75	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	75	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	225	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	150	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	75	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	75	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	75	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	75	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	75	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	75	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	75	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	75	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	75	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	75	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	375	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	150	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	4000	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	150	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	150	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	75	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	150	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	75	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	450	-
Cl-5.3, Table-3 (x)(Uranium)	-	3000	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	2500	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	2500	-
5.4/Annex D/i(O,P-DDT)	-	75	-
5.4/Annex D/i(P,P-DDT)	-	80	-
5.4/Annex D/i(O,P-DDE)	-	120	-
5.4/Annex D/i(P,P-DDE)	-	75	-
5.4/Annex D/i(O,P-DDD)	-	100	-
5.4/Annex D/i(P,P-DDD)	-	120	-
5.4/Annex D/ii(Lindane)	-	100	-
5.4/Annex D/iii(a-HCH)	-	100	-
5.4/Annex D/iii(β- HCH)	-	120	-
5.4/Annex D/iii(d-HCH)	-	100	-
5.4/Annex D/iv(a-Endosulfan)	-	75	-
5.4/Annex D/iv(b-Endosulfan)	-	75	-
5.4/Annex D/iv(Endosulfan sulfate)	-	75	-
5.4/Annex D/v(Monochrotophos)	-	120	-
5.4/Annex D/vi(Ethion)	-	100	-
5.4/Annex D/vii(Chlorpyrifos)	-	100	-
5.4/Annex D/viii(Phorate)	-	100	-
5.4/Annex D/viii(Phorate sulphoxide)	-	100	-
5.4/Annex D/viii(Phorate sulfone)	-	120	-
5.4/Annex D/ix(2,4 –D)	-	675	-
5.4/Annex D/x(Butachlor)	-	75	-
5.4/Annex D/xi(Isoproturon)	-	600	-
5.4/Annex D/xii(Alachlor)	-	80	-
5.4/Annex D/xiii(Atrazine)	-	100	-
5.4/Annex D/xiv(Methyl parathion)	-	75	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	75	-
5.4/Annex D/xv(Malathion)	-	100	-
5.4/Annex D/xxviii(Malaoxon)	-	100	-
5.4/Annex D/xvi(Aldrin)	-	75	-
5.4/Annex D/xvi(Dieldrin)	-	75	-
Cl-5.4 (ii)(Total pesticide residue)	-	1500	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	37.5	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(o,p DDT)	-	75	Repeated parameter
5.4 i)(p,p DDT)	-	80	Repeated parameter
5.4, i)(o,p DDE)	-	120	Repeated parameter
5.4 i)(p,p DDE)	-	75	Repeated parameter
5.4 i)(o,p DDD)	-	100	Repeated parameter
5.4 i)(p,p DDD)	-	120	Repeated parameter
5.4 i)(Gamma-HCH (Lindane))	-	100	Repeated parameter
5.4 i)(alpha-HCH)	-	100	Repeated parameter
5.4 i)(beta-HCH)	-	120	Repeated parameter
5.4 i)(Delta-HCH)	-	100	Repeated parameter
5.4 i)(alpha-Endosulfan)	-	75	Repeated parameter
5.4 i)(beta-Endosulfan)	-	75	Repeated parameter
5.4 i)(Endosulfan Sulphate)	-	75	Repeated parameter
5.4 i)(Monocrotophos)	-	120	Repeated parameter
5.4 i)(Ethion)	-	100	Repeated parameter
5.4 i)(Chlorpyrifos)	-	100	Repeated parameter
5.4 i)(Phorate)	-	100	Repeated parameter
5.4 i)(Phorate sulphoxide)	-	100	Repeated parameter
5.4 i)(Phorate sulphone)	-	120	Repeated parameter
5.4 i)(2,4-D)	-	675	Repeated parameter
5.4 i)(Butachlor)	-	75	Repeated parameter
5.4 i)(Isoproturon)	-	600	Repeated parameter
5.4 i)(Alachlor)	-	80	Repeated parameter
5.4 i)(Atrazine)	-	100	Repeated parameter
5.4 i)(Methyl Parathion)	-	75	Repeated parameter
5.4 i)(Methyl Paraoxon)	-	75	Repeated parameter
5.4 i)(Malathion)	-	100	Repeated parameter
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	100	Repeated parameter
5.4 i)(Dieldrin)	-	75	Repeated parameter
Table 3, x)(Uranium)	-	3000	Repeated parameter
5.4 i)(Aldrin)	-	75	Repeated parameter
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
5.3(Appearance)	-	-	-
Cl-5.1(General Requirements)	-	-	-
5.4 i)(o,p DDT)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Dieldrin)	-	-	-
Table 3, x)(Uranium)	-	-	-
5.4 i)(Aldrin)	-	-	-

31 Mar, 2027

-
Included w.e.f.20.12.2024

6573

FARE Labs Pvt. Ltd. (8166516), Gurugram

8166516

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	3250	30% Discount for BIS Sample
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	3250	30% Discount for BIS Sample
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	-	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	-	-

25 Nov, 2026

-
Included w.e.f.19.12.2024 For Alpha Emitters and Beta Emitters only

6574

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

ELECTRICAL

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	5000	-
6(CLASSIFICATION)	-	5000	-
7(MARKING AND INSTRUCTIONS)	-	5000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	5000	-
10(POWER INPUT AND CURRENT)	-	5000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
19(ABNORMAL OPERATION)	-	5000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
21(MECHANICAL STRENGTH)	-	5000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	5000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	-
27(PROVISION FOR EARTHING)	-	5000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	-
19.13(ABNORMAL OPERATION)	-	5000	-
19.101(Abnormal Operation)	-	5000	-
19.102(Abnormal Operation)	-	5000	-
24(COMPONENTS)	-	5000	-
14(TRANSIENT OVERVOLTAGES)	-	5000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.2(Radiated fields)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.5(Immunity to conducted discharges)	-	5000	-
28(SCREWS AND CONNECTIONS)	-	5000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	5000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	5000	-
18(ENDURANCE)	-	5000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
4(GENERAL REQUIREMENT)	-	5000	-
6(CLASSIFICATION)	-	5000	-
7(MARKING AND INSTRUCTIONS)	-	5000	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	5000	-
10(POWER INPUT AND CURRENT)	-	5000	-
11(HEATING)	-	5000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	-
19(ABNORMAL OPERATION)	-	5000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
21(MECHANICAL STRENGTH)	-	5000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	5000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	-
27(PROVISION FOR EARTHING)	-	5000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	-
19.13(ABNORMAL OPERATION)	-	5000	-
19.101(Abnormal Operation)	-	5000	-
19.102(Abnormal Operation)	-	5000	-
24(COMPONENTS)	-	5000	-
14(TRANSIENT OVERVOLTAGES)	-	5000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	5000	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	0	-
18(ENDURANCE)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-

26 Sep, 2027

-
INCLUDED W.E.F.07.11.2024 Exclusion cl 19.11.4.1 (Electrostatic discharges)

6575

Indian Institute of Packaging (IIP), Delhi

8177901

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Substance, Ref IS 1763)	-	600	-
Cl. 4.4(Size and tolerance on size)	-	550	CHARGES RATE ARE PER SIZE.
Cl. 4.5(pH)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1200	-
Cl.4.2(Substance, Ref IS 1763)	-	600	-
Cl. 4.4(Size and tolerance on size)	-	550	CHARGES ARE AS PER SIZE.
Cl. 4.5(pH)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1200	-
Cl.4.1(Description)	-	550	-
Cl.4.2(Substance)	-	600	-
Cl.4.2.1(Tolerances on nominal substance)	-	600	-
Cl.4.3(Thickness)	-	550	-
Cl.4.4(Sizes and tolerances on sizes)	-	550	CHARGES ARE AS PER SIZE.
Cl.4.5(pH)	-	700	-
Table-1(i)(Tensile index, CD)	-	1200	-
Table-1(i)(Tensile index, MD)	-	1200	-
Table-1(ii)(Brightness, ISO)	-	800	-
Table-1(iii)(Opacity)	-	800	-
Table-1(iv)(One minute cobb test)	-	600	-
Table-1(v)(No of double fold, CD)	-	700	-
Table-1(v)(No of double fold, MD)	-	700	-
Table-1(vi)(Gloss)	-	800	-
Table-1(vii)(Wax pick)	-	1200	-
Table-1(viii)(Smoothness (Bendtsen))	-	700	-
Table-1(ix)(Tear index, CD)	-	1200	-
Table-1(ix)(Tear index, MD)	-	1200	-

-
-

6576

CIPET, Madurai

6139834

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40-200 mm

51425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	25 % Discount for BIS
6(Visual Appearance)	-	500	25 % Discount for BIS
7.1(Hydraulic Characteristics - Quality test)	-	4800	25 % Discount for BIS
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	25 % Discount for BIS
7.2(Reversion Test)	-	700	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.3(Tensile Test- i) Tensile Strength)	-	1300	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.3(Tensile Test - ii)Elongation at Break)	-	1300	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	25 % Discount for BIS Specimen Prepration Charges 500/-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	25 % Discount for BIS Specimen Prepration Charges 500/-
7.5(Density)	-	700	25 % Discount for BIS Specimen Prepration Charges 500/-
7.6(Melt Flow Rate)	-	1100	25 % Discount for BIS Specimen Prepration Charges 500/-
7.6(Melt Flow Rate)	-	1100	25 % Discount for BIS
4.2(Carbon black- a)carbon content)	-	925	25 % Discount for BIS
4.2(Carbon black- b) Dispersion of carbon black)	-	700	25 % Discount for BIS
7.6(Melt now Rate (MFR))	-	1100	25 % Discount for BIS
7.5(Density)	-	700	25 % Discount for BIS
7.4 Table-2(Fusion Compatibility Test)	-	1600	25 % Discount for BIS
7.3(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1 Table -2(Hydraulic Characteristics)	-	1600	25 % Discount for BIS
6.1(VISUAL APPEARANCE)	-	500	25 % Discount for BIS
5.1.2(Ovality)	-	500	25 % Discount for BIS
5.1 table -1(DIMENSIONS OF PIPES)	-	500	25 % Discount for BIS
4.3(Anti-oxidant)	-	2000	25 % Discount for BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % Discount for BIS
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	25 % Discount for BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	25 % Discount for BIS
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	25 % Discount for BIS
3(CLASSIFICATION OF PIPES)	-	500	25 % Discount for BIS
4.1(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
4.1(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
4.1.3(Workmanship and appearance)	-	500	25 % Discount for BIS
4.1.4(Holding attachments for coupler parts)	-	1500	25 % Discount for BIS
6.1.3(Weldability Test- a) Quality test)	-	4800	25 % Discount for BIS
6.1.3(Weldability Test- b) Acceptance test)	-	1600	25 % Discount for BIS
3(Quick Coupled pipes)	-	1500	25 % Discount for BIS
3(QUICK COUPLED PIPES)	-	1500	25 % Discount for BIS
4(QUICK COUPLED FITTINGS)	-	1500	25 % Discount for BIS
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % Discount for BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25 % Discount for BIS
4.1 .1.2.1(HDPE couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1 .1.2.2(HDPE couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1(Quick Coupled Pipes and Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25 % Discount for BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25 % Discount for BIS
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.3, 6.1.3.1(Weldability Test)	-	1600	25 % Discount for BIS
6.1.3.1.1(Weldability Test)	-	1600	25 % Discount for BIS
6.1.3.2(Quick coupled fittings)	-	1500	25 % Discount for BIS
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	25 % Discount for BIS
7.2.1(Visual and Workmanship Requirement)	-	500	25 % Discount for BIS
6.2 b(Material Identification - Male & Female Coupler)	-	1050	25 % Discount for BIS
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	25 % Discount for BIS
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	25 % Discount for BIS
6.3.4()	-	500	25 % Discount for BIS
6.3.5(Material Identification - Saddle)	-	1100	25 % Discount for BIS
6.3.5(Material Identification - Pipe Ends)	-	1100	25 % Discount for BIS
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	25 % Discount for BIS
4.2(Metallic Couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2(Metallic Couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
7.2.1(Leakage Test)	-	850	25 % Discount for BIS
Cl.4.1.3(Den sity Test)	-	700	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(Thermal Stabi lity)	-	2200	25 % Discount for BIS
Cl.4.1.3(Thermal Stabi lity)	-	2200	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.5(Di men sion)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.5.1.l(Outside Diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.5.1.l(Outside Diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.6.2.L(Wall Thickness)	-	500	25 % Discount for BIS
Cl.6.2.4(Workmanship and Appearance)	-	500	25 % Discount for BIS
Cl.6.2.6(Rubber Ring Hardness)	-	500	25 % Discount for BIS
Cl.6.2.6(Ageing Test)	-	4200	25 % Discount for BIS
Cl.7.1.l(Visual Anneara nce)	-	500	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.3(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.3(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.6(Corrected Density)	-	700	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.2(Cl.7.2.2)	-	0	0
Cl.7.2.3(Weld ability Test)	-	1600	25 % Discount for BIS
Cl.7.2.3(Weld ability Test)	-	1600	25 % Discount for BIS
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	25 % Discount for BIS
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	500	25 % Discount for BIS
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1(Thermal Stability (OIT))	-	2200	25 % Discount for BIS
6.1(Volatile Matter)	-	700	25 % Discount for BIS
6.1(Water content)	-	700	25 % Discount for BIS
6.1(Tensile strength at Yield & Elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
6.1(Carbon Black Content)	-	925	25 % Discount for BIS
6.1(Carbon Black Dispersion)	-	700	25 % Discount for BIS
6.2.1(Base Density x 2)	-	1400	25 % Discount for BIS
6.2.1(Melt Flow Index x 2)	-	2200	25 % Discount for BIS
6.2.1(Thermal Stability (OIT) x 2)	-	4400	25 % Discount for BIS
6.2.1(Volatile Matter x 2)	-	1400	25 % Discount for BIS
6.2.1(Water content x 2)	-	700	25 % Discount for BIS
6.2.1(Carbon Black Content x 2)	-	1400	25 % Discount for BIS
6.2.1(Carbon Black Dispersion x 2)	-	1400	25 % Discount for BIS
6.2.1(Wall thickness of male & female coupler)	-	500	25 % Discount for BIS
6.2.4(Workmanship and appearance (Visual))	-	500	25 % Discount for BIS
6.2.5(Holding attachment for coupler parts)	-	1500	25 % Discount for BIS
6.2.5(Material Composition (Chemical Analysis))	-	1050	25 % Discount for BIS
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	25 % Discount for BIS
6.2.6(Material Identification (Chemical Analysis))	-	1050	25 % Discount for BIS
6.2.6(Color)	-	500	25 % Discount for BIS
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	25 % Discount for BIS
6.2.6(Ageing Charges for rubber ring)	-	500	25 % Discount for BIS
7.1.1(Visual appearance of pipes)	-	500	25 % Discount for BIS
7.1.2(Hydraulic Characteristics)	-	1600	25 % Discount for BIS
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	25 % Discount for BIS
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	1600	25 % Discount for BIS
7.1.3(Reversion)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.4(Tensile strength & elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.5(Fusion Compatibility test)	-	1600	25 % Discount for BIS
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.6(Corrected Density)	-	700	25 % Discount for BIS
7.1.6(Base Density)	-	700	25 % Discount for BIS
7.1.6(Carbon black Content)	-	925	25 % Discount for BIS
7.1.7(Melt Flow Rate (MFR))	-	1100	25 % Discount for BIS
7.2.1(Leakage test 1hour / 27°C)	-	850	25 % Discount for BIS
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	Specimen Preparation Charges 500/- 25 % Discount for BIS
8(Supply of pipe (Visual))	-	500	25 % Discount for BIS
4.1.1 (Table-1)(Density)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Melt Flow Index)	-	1100	25 % Discount for BIS
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	25 % Discount for BIS
4.1.1 (Table-1)(Volatile Matter)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Water content)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
4.1.4(Carbon Black Dispersion)	-	700	25 % Discount for BIS
4.1.1(Polyethylene material)	-	1100	25 % Discount for BIS
4.1.3, Table 1,(i)(Bass density)	-	700	25 % Discount for BIS
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	25 % Discount for BIS
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	25 % Discount for BIS
4.1.3, Table 1,(iv)(Volatile matter)	-	700	25 % Discount for BIS
4.1.3, Table 1,(v)(Water content)	-	700	25 % Discount for BIS
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.4(The Carbon Content and Dispersion)	-	1625	25 % Discount for BIS
4.1.5(Carbon Black Specification)	-	925	25 % Discount for BIS
4.1.6(Antioxidant)	-	2000	25 % Discount for BIS
4.1.7(Rework Material)	-	500	25 % Discount for BIS
4.2(Metallic Couplers)	-	500	25 % Discount for BIS
5.1, Table 1,(i)(Plain pipes)	-	500	25 % Discount for BIS
5.1, Table 1,(ii)(90° Bends and tee)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(iii)(Base pipe )	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(vii)(Riser pipe and socket)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
7.1.1(Visual Appearance and Workmanship)	-	500	25 % Discount for BIS
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	850	-
7.2.3(Weldability Test)	-	1600	-
7.3(Quick Couple Fitting)	-	1500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	-
4.1 (b)(HDPE couplers —)	-	500	-
5(Dimensions of pipe - i) Outside diameter)	-	15000	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	4800	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.6(Melt now Rate (MFR))	-	925	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1600	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2200	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1600	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	1500	-
3(QUICK COUPLED PIPES)	-	1500	-
4(QUICK COUPLED FITTINGS)	-	1500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
4.1 .1.2.1(HDPE couplers)	-	1500	-
4.1 .1.2.2(HDPE couplers)	-	1500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	1500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	-
4.2(Metallic Couplers)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	1500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	500	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	1300	-
6.1(Carbon Black Content)	-	925	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	1500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	500	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1600	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	925	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	1600	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	950	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1100	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	700	-
4.1.5(Carbon Black Specification)	-	700	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	1500	-
5.1, Table 1,(i)(Plain pipes)	-	1500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	1500	-
5.1, Table 1,(iii)(Base pipe )	-	1500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	850	-
7.2.3(Weldability Test)	-	1600	-
7.3(Quick Couple Fitting)	-	1500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	-
4.1 (b)(HDPE couplers —)	-	1500	-
5(Dimensions of pipe - i) Outside diameter)	-	1500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	1500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	1600	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.6(Melt now Rate (MFR))	-	1100	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1600	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	200	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	4800	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	1500	-
3(QUICK COUPLED PIPES)	-	1500	-
4(QUICK COUPLED FITTINGS)	-	1500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
4.1 .1.2.1(HDPE couplers)	-	1500	-
4.1 .1.2.2(HDPE couplers)	-	1500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	1500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1050	-
4.2(Metallic Couplers)	-	1050	-
4.2(Metallic Couplers)	-	1050	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4200	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	700	-
6.1(Carbon Black Content)	-	700	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	1000	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	1500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	1050	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1300	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	950	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	925	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1050	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	700	-
4.1.5(Carbon Black Specification)	-	500	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
5.1, Table 1,(i)(Plain pipes)	-	500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	25 % Discount for BIS
7.1.6(Corrected Density)	-	700	25 % Discount for BIS
7.1.7(Melt flow rate)	-	1100	25 % Discount for BIS
7.2.1(Leakage Test)	-	850	25 % Discount for BIS
7.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
7.2.3(Weldability Test)	-	1600	25 % Discount for BIS
7.3(Quick Couple Fitting)	-	500	25 % Discount for BIS
10(Marking)	-	500	25 % Discount for BIS
5.1.2(Squareness)	-	500	25 % Discount for BIS
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	25 % Discount for BIS
4.1 (b)(HDPE couplers —)	-	1500	25 % Discount for BIS
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	0
7.6(Melt now Rate (MFR))	-	0	0
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	00
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	0
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	1500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	1300	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	950	-
4.2(Carbon black- b) Dispersion of carbon black)	-	800	-
7.6(Melt now Rate (MFR))	-	1100	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1300	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	2000	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1600	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	500	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-
4.1 .1.2.1(HDPE couplers)	-	500	-
4.1 .1.2.2(HDPE couplers)	-	500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1050	-
4.2(Metallic Couplers)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	7
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	850	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4200	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	1300	-
6.1(Carbon Black Content)	-	925	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	1050	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1600	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	925	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	925	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1050	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1300	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	900	-
4.1.5(Carbon Black Specification)	-	850	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
5.1, Table 1,(i)(Plain pipes)	-	500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	1600	-
7.2.3(Weldability Test)	-	500	-
7.3(Quick Couple Fitting)	-	500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	500	-
4.1 (b)(HDPE couplers —)	-	1500	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	-	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	-	-
6(Visual Appearance)	-	-	-
7.1(Hydraulic Characteristics - Quality test)	-	-	-
7.1(Hydraulic Characteristics - Acceptance test)	-	-	-
7.2(Reversion Test)	-	-	-
7.3(Tensile Test- i) Tensile Strength)	-	-	-
7.3(Tensile Test - ii)Elongation at Break)	-	-	-
7.4(Fusion Compatibility Test- a) Quality test)	-	-	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	-	-
7.5(Density)	-	-	-
7.6(Melt Flow Rate)	-	-	-
7.6(Melt Flow Rate)	-	-	-
4.2(Carbon black- a)carbon content)	-	-	-
4.2(Carbon black- b) Dispersion of carbon black)	-	-	-
7.6(Melt now Rate (MFR))	-	-	-
7.5(Density)	-	-	-
7.4 Table-2(Fusion Compatibility Test)	-	-	-
7.3(Tensile Test)	-	-	-
7.2(Reversion Test)	-	-	-
7.1 Table -2(Hydraulic Characteristics)	-	-	-
6.1(VISUAL APPEARANCE)	-	-	-
5.1.2(Ovality)	-	-	-
5.1 table -1(DIMENSIONS OF PIPES)	-	-	-
4.3(Anti-oxidant)	-	-	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	-	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	-	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	-	-
3(CLASSIFICATION OF PIPES)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1.3(Workmanship and appearance)	-	-	-
4.1.4(Holding attachments for coupler parts)	-	-	-
6.1.3(Weldability Test- a) Quality test)	-	-	-
6.1.3(Weldability Test- b) Acceptance test)	-	-	-
3(Quick Coupled pipes)	-	-	-
3(QUICK COUPLED PIPES)	-	-	-
4(QUICK COUPLED FITTINGS)	-	-	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	-	-
4.1 .1.2.1(HDPE couplers)	-	-	-
4.1 .1.2.2(HDPE couplers)	-	-	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	-	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	-	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	-	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	-	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	-	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	-	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	-	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	-	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	-	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	-	-
6.1(Quick Coupled Pipes and Fittings)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.1.3, 6.1.3.1(Weldability Test)	-	-	-
6.1.3.1.1(Weldability Test)	-	-	-
6.1.3.2(Quick coupled fittings)	-	-	-
6.2, 6.2.1(Quick Coupled Fittings)	-	-	-
7.2.1(Visual and Workmanship Requirement)	-	-	-
6.2 b(Material Identification - Male & Female Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.4()	-	-	-
6.3.5(Material Identification - Saddle)	-	-	-
6.3.5(Material Identification - Pipe Ends)	-	-	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	-	-
4.2(Metallic Couplers)	-	-	-
4.2(Metallic Couplers)	-	-	-
7.2.1(Leakage Test)	-	-	-
Cl.4.1.3(Den sity Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.5(Di men sion)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.6.2.L(Wall Thickness)	-	-	-
Cl.6.2.4(Workmanship and Appearance)	-	-	-
Cl.6.2.6(Rubber Ring Hardness)	-	-	-
Cl.6.2.6(Ageing Test)	-	-	-
Cl.7.1.l(Visual Anneara nce)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.6(Corrected Density)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.2(Cl.7.2.2)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	-	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	-	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	-	-
6.1(Thermal Stability (OIT))	-	-	-
6.1(Volatile Matter)	-	-	-
6.1(Water content)	-	-	-
6.1(Tensile strength at Yield & Elongation at break)	-	-	-
6.1(Carbon Black Content)	-	-	-
6.1(Carbon Black Dispersion)	-	-	-
6.2.1(Base Density x 2)	-	-	-
6.2.1(Melt Flow Index x 2)	-	-	-
6.2.1(Thermal Stability (OIT) x 2)	-	-	-
6.2.1(Volatile Matter x 2)	-	-	-
6.2.1(Water content x 2)	-	-	-
6.2.1(Carbon Black Content x 2)	-	-	-
6.2.1(Carbon Black Dispersion x 2)	-	-	-
6.2.1(Wall thickness of male & female coupler)	-	-	-
6.2.4(Workmanship and appearance (Visual))	-	-	-
6.2.5(Holding attachment for coupler parts)	-	-	-
6.2.5(Material Composition (Chemical Analysis))	-	-	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	-	-
6.2.6(Material Identification (Chemical Analysis))	-	-	-
6.2.6(Color)	-	-	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	-	-
6.2.6(Ageing Charges for rubber ring)	-	-	-
7.1.1(Visual appearance of pipes)	-	-	-
7.1.2(Hydraulic Characteristics)	-	-	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.3(Reversion)	-	-	-
7.1.4(Tensile strength & elongation)	-	-	-
7.1.5(Fusion Compatibility test)	-	-	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.6(Base Density)	-	-	-
7.1.6(Carbon black Content)	-	-	-
7.1.7(Melt Flow Rate (MFR))	-	-	-
7.2.1(Leakage test 1hour / 27°C)	-	-	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	-	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
8(Supply of pipe (Visual))	-	-	-
4.1.1 (Table-1)(Density)	-	-	-
4.1.1 (Table-1)(Melt Flow Index)	-	-	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	-	-
4.1.1 (Table-1)(Volatile Matter)	-	-	-
4.1.1 (Table-1)(Water content)	-	-	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	-	-
4.1.4(Carbon Black Content)	-	-	-
4.1.4(Carbon Black Dispersion)	-	-	-
4.1.1(Polyethylene material)	-	-	-
4.1.3, Table 1,(i)(Bass density)	-	-	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	-	-
4.1.3, Table 1,(iii)(Thermal stability)	-	-	-
4.1.3, Table 1,(iv)(Volatile matter)	-	-	-
4.1.3, Table 1,(v)(Water content)	-	-	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	-	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	-	-
4.1.4(The Carbon Content and Dispersion)	-	-	-
4.1.5(Carbon Black Specification)	-	-	-
4.1.6(Antioxidant)	-	-	-
4.1.7(Rework Material)	-	-	-
4.2(Metallic Couplers)	-	-	-
5.1, Table 1,(i)(Plain pipes)	-	-	-
5.1, Table 1,(ii)(90° Bends and tee)	-	-	-
5.1, Table 1,(iii)(Base pipe )	-	-	-
5.1, Table 1,(iv)(PCN)	-	-	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	-	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	-	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	-	-
7.1.1(Visual Appearance and Workmanship)	-	-	-
7.1.2(Hydraulic Performance Characteristic)	-	-	-
7.1.3(Reversion Test)	-	-	-
7.1.4(Tensile Test)	-	-	-
7.1.5(Fusion Compatibility Test)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.7(Melt flow rate)	-	-	-
7.2.1(Leakage Test)	-	-	-
7.2.2(Hydraulic Proof Test)	-	-	-
7.2.3(Weldability Test)	-	-	-
7.3(Quick Couple Fitting)	-	-	-
10(Marking)	-	-	-
5.1.2(Squareness)	-	-	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	-	-
4.1 (b)(HDPE couplers —)	-	-	-

22 May, 2027

-
Included w.e.f 10.07.2025 For finished products only

6577

Bureau Veritas (India) Pvt Ltd, Chennai

6108016

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	200	-
Cl-5.2.2(Coliform)	-	200	-
Cl-5.2.3(Staphylococcus aureus)	-	300	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	300	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	200	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	100	-
Cl-5.2.7(Yeast and mould)	-	200	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	350	-
Cl-5.2.3(Faecal streptococci)	-	300	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	350	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	100	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	-
Cl-5.3, Table-3 (x)(Uranium)	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	-
Cl-5.3, Table-1 (ii)(Odour)	-	50	-
Cl-5.3, Table-1 (iii)(Taste)	-	50	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	150	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	100	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	150	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	150	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	150	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	950	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	2500	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	200	-
Cl-5.2.2(Coliform)	-	200	-
Cl-5.2.3(Staphylococcus aureus)	-	300	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	300	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	200	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	100	-
Cl-5.2.7(Yeast and mould)	-	200	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	350	-
Cl-5.2.3(Faecal streptococci)	-	300	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	350	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	100	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	-
Cl-5.3, Table-3 (x)(Uranium)	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	-
Cl-5.3, Table-1 (ii)(Odour)	-	50	-
Cl-5.3, Table-1 (iii)(Taste)	-	50	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	150	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	100	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	150	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	150	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	150	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	950	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	2500	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.1(General Requirements)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Aldrin)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
Table 3, x)(Uranium)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-

31 Jul, 2026

-
Included w.e.f.28.05.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

6578

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Steel Tube

13800 View breakup
For BIS samples: 1.5 times of BIS testing charges,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 AND AS PER IS 10748(CARBON)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(MANGANESE)	-	600	5% discount for BIS
6.2 AND AS PER IS 513(SILICON)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(SULPHUR)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(COPPER)	-	600	5% discount for BIS
6.2 AND AS PER IS 513(NITROGEN)	-	600	5% discount for BIS
Clause - 6.1.1, Table-1(ALUMINIUM)	-	600	5% discount for BIS
Cl 8(Outer Diameter, Thickness & Mass)	-	600	5% discount for BIS
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	600	5% discount for BIS
10.1(Thared Joints(IS:554))	-	600	5% discount for BIS
11(Length & tolerance)	-	600	5% discount for BIS
13.0(Leak Proof Test)	-	600	5% discount for BIS
Cl. 14.1(Tensile Strength)	-	600	5% discount for BIS
Cl. 14.1.1(Elongation)	-	600	5% discount for BIS
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	600	5% discount for BIS
Cl. 14.3(Flattening test (Over 50 mm NB))	-	600	5% discount for BIS
Cl 15(Workmanship)	-	600	5% discount for BIS

26 Jul, 2027

-
The scope may be restricted for plain ended pipe only. The scope may be restricted upto 40 mm

6579

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

Steel tubes for structural purposes

8200 View breakup
For BIS samples: 1.5 times of BIS testing charges,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	300	5% discount for BIS
Clause - 5.1, Table-3(MANGANESE)	-	300	5% discount for BIS
Clause - 5.1, Table-3(SILICON)	-	300	5% discount for BIS
Clause - 5.1, Table-3(SULPHUR)	-	300	5% discount for BIS
Clause - 5.1, Table-3(PHOSPHURS)	-	300	5% discount for BIS
5 AND AS PER IS 10748(COPPER)	-	300	5% discount for BIS
Clause - 5.1, Table-3( ALUMINIUM)	-	300	5% discount for BIS
Cl 6(Outer Diameter, Thickness & Mass)	-	300	5% discount for BIS
Cl 7(Workmanship)	-	100	5% discount for BIS
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	300	5% discount for BIS
8.0(Uniformity of galvanized coating - IS 4736)	-	300	5% discount for BIS
9(Straightness)	-	300	5% discount for BIS
10(Lengths)	-	100	5% discount for BIS
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	300	5% discount for BIS
Clause 11.2, Table -2(Yield Strength)	-	300	5% discount for BIS
Clause 11.2, Table -2(Elongation)	-	300	5% discount for BIS
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	300	5% discount for BIS
12(Marking)	-	100	5% discount for BIS
13.0(Oiling and Painting - Visual)	-	200	5% discount for BIS
Clause - 5.1, Table-3(NITROGEN)	-	300	5% discount for BIS

26 Jul, 2027

-
The scope may be restricted upto 40 mm

6580

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 16726 (2018)

Textiles – Pouch for ammunition and grenades made of disruptive pattern nylon 6 6 – Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	300	-
Clause 5(FREEDOM FROM DEFECT)	-	300	-
Clauses 6.1 and 6.2, Table 2 (i)(Nature of fibre/filament)	-	800	-
Clauses 6.1 and 6.2, Table 2 (ii)(Nature of coating)	-	500	-
Clauses 6.1 and 6.2, Table 2 (iii)(Weave)	-	300	-
Clauses 6.1 and 6.2, Table 2 (iv)(End/dm)	-	300	-
Clauses 6.1 and 6.2, Table 2 (v)(Picks/dm)	-	300	-
Clauses 6.1 and 6.2, Table 2 (vi)(Mass, g/sq. m)	-	300	-
Clauses 6.1 and 6.2, Table 2 (vii)("Tearing strength, N, Min: (a) Warpway (b) Weftway")	-	500	-
Clauses 6.1 and 6.2, Table 2 (viii)(Abrasion resistance (Martindale), Using abradant ‘Emery paper No. 600’ at load of 200 g on uncoated surface)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (ix)("Colour fastness to washing, Test C (3), Min: (a) Change in colour (b) Staining on adjacent fabric")	-	1500	-
Clauses 6.1 and 6.2, Table 2 (x)("Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric")	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xi)("Colour fastness to rubbing, Min: (a) Dry (b) Wet")	-	500	-
Clauses 6.1 and 6.2, Table 2 (xii)(Colour fastness to light, Min)	-	1500	-
Clauses 6.1 and 6.2, Table 2 (xiii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xiv)(Water proofness at 30 cm water column height for 60 min)	-	800	-
Clauses 6.1 and 6.2, Table 2 (xv)(Water repellency (uncoated face), Spray rating, Min)	-	800	-
Clauses 6.1 and 6.2, Table 2 (xvi)(Separation of PU film)	-	300	-
Clauses 6.1 and 6.2, Table 2 (xvii)(Resistance to accelerated ageing at 70 ± 1°C for 168 h in air circulating oven)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xviii)(Resistance to damage by flexing after 100 000 cycles)	-	1000	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	800	-
Clause 6.3, Table 3 (ii)(Number of holes per square inch (Rectangular in shape))	-	300	-
Clause 6.3, Table 3 (iii)(Mass, g/sq. m)	-	300	-
Clause 6.3, Table 3 (iv)(Colour fastness to washing, Test C(3), Min: (a) Change in colour (b) Staining on adjacent fabric)	-	1000	-
Clause 6.3, Table 3 (v)(Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric)	-	1000	-
Clause 6.3, Table 3 (vi)(Colour fastness to light, Min)	-	1500	-
Clause 6.3, Table 3 (vii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	800	-
Clause 6.3, Table 3 (viii)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.4, Table 4 (i)(Nature of fibre/filament)	-	800	-
Clause 6.4 Table 4 (ii)(End/dm)	-	300	-
Clause 6.4, Table 4 (iii)(Picks/dm)	-	300	-
Clause 6.4, Table 4 (iv)(Mass per linear meter, g)	-	300	-
Clause 6.4 Table 4 (v)(Breaking strength, N, Min (2.5 cm × full width fabric between grips))	-	500	-
Clause 6.4, Table 4 (vi)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	1000	-
Clause 6.4, Table 4 (vii)(Colour fastness to light, Min)	-	1500	-
Clause 6.4, Table 4 (vii)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.5, Table 5 (i)(Nature of fibre/filament)	-	800	-
Clause 6.5, Table 5 (i)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	1000	-
Clause 6.5, Table 5 (i)(Colour fastness to light, Min)	-	1500	-
Clause 6.5, Table 5 (i)(Dimensional change due to relaxation, percentage, Max: a) Warpway b) Weftway)	-	800	-
Clause 6.5, Table 5 (i)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.9, Table 6 (i)(Nature of material)	-	800	-
Clause 6.9, Table 6 (i)(Resistance to accelerated ageing)	-	1500	-
Clause 6.9, Table 6 (i)(Resistance to low temperature)	-	1000	-
Clause 6.9, Table 6 (i)(Colour fastness to light, Min)	-	1500	-
Clause 6.9, Table 6 (i)(Pull load, kgf, Min (For quick release buckle only))	-	500	-
Clause 6.6(The Component – 8, Component – 9, Component – 10 and Component – 11 of the 'Pouch')	-	4000	-
Clause 6.7(The Component – 12 of the ‘Pouch’)	-	3000	-
Clause 6.8(Component – 13, Component –14 and Component –15 used in the ‘Pouch’)	-	4000	-
Clause 7(MARKING)	-	300	-
Clause 8(PACKING)	-	300	-
3(Material and manufacture)	-	500	-
4(Stitching)	-	300	-
6.1 and 6.2 - Table 2 - (i)(Nature of fibre filament)	-	800	-
6.1 and 6.2 - Table 2 - (ii)(Nature of coating)	-	500	-
6.1 and 6.2 - Table 2 - (iii)(Weave)	-	300	-
6.1 and 6.2 - Table 2 - (iv)(End/dm)	-	300	-
6.1 and 6.2 - Table 2 - (v)(Picks/dm)	-	300	-
6.1 and 6.2 - Table 2 - (vi)(Mass)	-	300	-
6.1 and 6.2 - Table 2 - (vii)(Tearing strength)	-	500	-
6.1 and 6.2 - Table 2 - (viii)(Abrasion resistance)	-	800	-
6.1 and 6.2 - Table 2 - (ix)(Colour fastness to washing)	-	1000	-
6.1 and 6.2 - Table 2 - (x)(Colour fastness to perspiration)	-	1000	-
6.1 and 6.2 - Table 2 - (xi)(Colour fastness to rubbing)	-	1000	-
6.1 and 6.2 - Table 2 - (xii)(Colour fastness to light)	-	1500	-
6.1 and 6.2 - Table 2 - (xiii)(Dimensional change due to relaxation)	-	800	-
6.1 and 6.2 - Table 2 - (xiv)(Water proofness at 30 cm water column height)	-	800	-
6.1 and 6.2 - Table 2 - (xv)(Water repellency, spray rating)	-	800	-
6.1 and 6.2 - Table 2 - (xvi)(Separation of PU film)	-	300	-
6.1 and 6.2 - Table 2 - (xvii)(Resistance to accelerated)	-	1500	-
6.1 and 6.2 - Table 2 - (xviii)(Resistance to damage by flexing after 100000 cycles)	-	800	-
6.3 - Table 3 - (i)(Nature of fibre/ filament)	-	800	-
6.3 - Table 3 - (ii)(Number of holes per square inch)	-	300	-
6.3 - Table 3 - (iii)(Mass)	-	300	-
6.3 - Table 3 - (iv)(Colour fastness to washing)	-	1000	-
6.3 - Table 3 - (v)(Colour fastness to perspiration)	-	1000	-
6.3 - Table 3 - (vi)(Colour fastness to light)	-	1500	-
6.3 - Table 3 - (vii)(Dimensional change due to relaxation)	-	800	-
6.3 - Table 3 - (viii)(pH value of aqueous extract)	-	500	-
6.4 - Table 4 - (i)(Nature of fibre / filament)	-	800	-
6.4 - Table 4 - (ii)(6.4 - Table 4 - (iii))	-	300	-
6.4 - Table 4 - (iv)(Mass per linear meter)	-	300	-
6.4 - Table 4 - (v)(Breaking strength)	-	500	-
6.4 - Table 4 - (vi)(Colour fastness to washing)	-	1000	-
6.4 - Table 4 - (vii)(Colour fastness to light)	-	1500	-
6.4 - Table 4 - (viii)(pH value of aqueous extract)	-	500	-
6.5 - Table 5 - (i)(Nature of fibre/filament)	-	800	-
6.5 - Table 5 - (ii)(Colour fastness to washing)	-	1000	-
6.5 - Table 5 - (iii)(Colour fastness to light)	-	1500	-
6.5 - Table 5 - (iv)(Dimensional change due to relaxation)	-	800	-
6.5 - Table 5 - (v)(pH value of aquesous extract)	-	500	-
6.9 - Table 6 - (i)(Nature of material)	-	800	-
6.9 - Table 6 - (ii)(Resistance to accelerated ageing)	-	1500	-
6.9 - Table 6 - (iii)(Resistance to low temperature)	-	1500	-
6.9 - Table 6 - (iv)(Colour fastness to light)	-	1500	-
6.9 - Table 6 - (v)(Pull load)	-	500	-
7(Marking)	-	300	-
8(Packing)	-	300	-
Cl-6.6 (Cl-7.1 of IS 8156)(Colour Fastness)	-	500	-
Cl-6.6 (Cl-7.2 of IS 8156)(Strength of Tapes)	-	500	-
Cl-6.6 (Cl-7.3 of IS 8156)(Shrinkage)	-	800	-
Cl-6.6 (Cl-7.4 of IS 8156)(Endurance Test)	-	800	-
Cl-6.6 (Cl-7.5 of IS 8156)(Dot Tear Test)	-	500	-
Cl-6.7 (Cl-4.1 of IS 9686)(Length)	-	300	-
Cl-6.7 (Cl-4.3 of IS 9686)(Thickness)	-	300	-
Cl-6.7 (Cl-4.4 of IS 9686)(Stretch Tests)	-	300	-
Cl-6.7 (Cl-4.4.1.1 of IS 9686)(Before Ageing- Extension)	-	800	-
Cl-6.7 (Cl-4.4.1.2 of IS 9686)(Before Ageing- Limit of useful extension)	-	800	-
Cl-6.7 (Cl-4.4.1.3 of IS 9686)(Before Ageing-Tension decay under constant stretch)	-	800	-
Cl-6.7 (Cl-4.4.1.4 of IS 9686)(Before Ageing-Fatigue test)	-	800	-
Cl-6.7 (Cl-4.4.2.1 of IS 9686)(After Accelerated Ageing- Extension)	-	800	-
Cl-6.7 (Cl-4.4.2.2 of IS 9686)(After Accelerated Ageing- Tension decay under constant stretch)	-	800	-
Cl-6.7 (Cl-4.4.2.3 of IS 9686)(After Accelerated Ageing- Fatigue test)	-	800	-
Cl-6.7 (Cl-4.5 of IS 9686)("Colour Fastness a-light ")	-	1500	-
Cl-6.7 (Cl-4.5 of IS 9686)("Colour Fastness b-washing")	-	1000	-
Cl-6.8 (Cl-10.2 , Table-4 (i) of IS 14181 (Part-1)(Security of interlocking of textile chain to lateral load or cross-wise strength of textile chain with 25 mm length in grip)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (ii) of IS 14181 (Part-1)(Fold over security of textile chain (for both obverse and reverse fold))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (iii) of IS 14181 (Part-1)(Security of attachment of top stop (all types))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (iv) of IS 14181 (Part-1)(Security of attachment of bottom stop)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (v) of IS 14181 (Part-1)(Security of attachment of retainer to longitudinal load (open-end fasteners))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (vi) of IS 14181 (Part-1)(Security of attachment of retainer to lateral load (open end fasteners))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (vii) of IS 14181 (Part-1)(Security of attachment of puller to slider)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (viii) of IS 14181 (Part-1)(Security of slider lock holding)	-	500	-
Cl-6.8 (Cl-10.3, Table-5 (i) of IS 14181 (Part-1)(Reciprocating movement of slider under load)	-	500	-
Cl-6.8 (Cl-10.3, Table-5 (iv) of IS 14181 (Part-1)(Remeshability of fastener)	-	500	-
Cl-6.8 (Cl-10.4, Table-6 (i) of IS 14181 (Part-1)(Light)	-	1500	-
Cl-6.8 (Cl-10.4, Table-6 (ii) of IS 14181 (Part-1)(Perspiration)	-	1000	-
Cl-6.8 (Cl-10.4, Table-6 (iii) of IS 14181 (Part-1)(Sea water)	-	800	-
Cl-6.8 (Cl-10.4, Table-6 (iv) of IS 14181 (Part-1)(Washing)	-	1000	-
Cl-6.8 (Cl-10.4, Table-6 (v) of IS 14181 (Part-1)(Organic solvents)	-	800	-

15 Apr, 2027

-
included w.e.f.21.10.2024 Exclusion Cl-6.8 (Cl-10.3, Table-5 (ii) of IS 14181 (Part-1) (Resistance to abrasion Under load (cycles)) Cl-6.8 (Cl-10.3, Table-5 (iii) of IS 14181 (Part-1) (Resistance to heat under load)

6581

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

18210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	200	-
5.2(Colour)	-	200	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	0	-
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	0	-
5.2(Colour)	-	0	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	0	-
Cl. 5, 5.1(Shape of Net)	-	0	-
5.2(Colour)	-	0	-
6(Types)	-	0	-
Cl. 4 & 7, Table-1(Light Duty Fencing Net (Hexagonal Shape) :)	-	0	-
(i)(Mass)	-	450	-
(ii)(Mesh Size, Traverse Direction)	-	550	-
(iii)(Mesh Size, Cross Direction)	-	550	-
(iv)(Thickness at joint)	-	450	-
(v)(Filament Thickness)	-	450	-
(vi)(Dimensions:)	-	0	-
(vi)(Length)	-	300	-
(vi)(Width)	-	300	-
(vii) a(Tensile Strength before UV exposure, Machine Direction)	-	900	-
(vii) b(Tensile Strength before UV exposure, Traverse Direction)	-	0	-
(viii) a(Elongation before UV exposure, Machine Direction)	-	0	-
(viii) b(Elongation before UV exposure, Traverse Direction)	-	0	-
(ix) a(Tensile Strength after UV exposure, Machine Direction)	-	13860	-
(ix) b(Tensile Strength after UV exposure, Traverse Direction)	-	0	-

-
-

6582

BIS, Eastern Regional Laboratory (ERL)

None

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

For all Type and Variety

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (visual)	-
7.1.1 (Tear strength)	-
7.1.2 (Abrasion resistance)	-
7.5.1 (Tensile)	-
7.5.3 (Upper flexing)	-
7.6.1 (Out sole thickness)	-
7.6.3 (out sole abrasion)	-
7.6.4 (out sole flexing)	-
7.6.5 (Interlayer bond strength)	-
7.7.1 (Insock thickness)	-
7.7.2 (Insock abrasion)	-
8.2 (Leak proofness)	-
8.1 (Hot contact)	-
8.3 (Height of upper)	-
8.4 (Adhesion test)	-
7.3 (sulphur test)	-

-
Mech- Complete Chem- Except permeation test

6583

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

All Grade / Type / Size / Designation

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-4.2(Carbon content of finished PE lateral pipe)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.0(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3(Tensile Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.1(Test Piece)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.2(Procedure)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.0(Supply of pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.0(Coiling)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-10.0(Sampling and criteria for conformity)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Class of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Elongation at Break)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(a)(Carbon Black Content-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

6584

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17358 : Part 2 (2020)

Agro textiles â€“ Fencing nets for agriculture and horticulture purposes â€“ Specification Part 2 Fencing nets made from mono filament yarns and combination of tape and mono filament yarns

25010 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.1(HDPE Monofilament density)	-	500	-
Clause No. 4.1.1(Heat Shrinkage of the Monofilament Yarn at 60 and 95℃)	-	2000	-
Clause No. 4.2(Width of the tape used in fabric)	-	200	-
Clause No. 4.2(Density of the tape)	-	500	-
Clause No. 4.2.1(Heat Shrinkage of the tape at 60 and 95℃)	-	2000	-
Clause No. 5.1(Width of the Fabric)	-	200	-
Clause No. 5.2.1(Eyelet to Eyelet Edge Distance)	-	200	-
Clause No. 6(Mass of the fencing nets)	-	0	-
Clause 7.1(Dimensions)	-	600	-
Clause 7.2 (i)(Mass g/m²)	-	450	-
Clause 7.2 (ii)(Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-	900	-
Clause 7.2 (iii)(Retention of breaking strength after UV exposure of 144 h)	-	13860	-
Clause 7.2 (iv)(Colour fastness to artificial light)	-	1650	-
Clause 7.2 (v)(Bursting pressure, kgf/cm2)	-	800	-
4.1(MATERIALS - HDPE Monofilament)	-	0	-
4.2(MATERIALS - HDPE Tapes)	-	0	-
5.1(MANUFACTURE - Fabric)	-	200	Tape width
5.2(MANUFACTURE - Eyelet)	-	550	eyelet to eyelet distance across length + length of eyelet + number of ply
5.3(MANUFACTURE - Colour)	-	200	-
6(TYPES of e fencing nets - a) Type 1 b) Type 2)	-	200	-
7.1(REQUIREMENTS - Dimensions and Mass)	-	0	-
7.2-Table 1- i)(REQUIREMENTS - Mass g/m2)	-	0	-
7.2-Table 1- ii)(REQUIREMENTS - Average breaking strength of fencing net fabric (strip method, 325×50 mm test piece with gauge length of 200 mm), N a) Warpway b) Weftway As per IS 1969 (Part 1))	-	0	-
7.2-Table 1- iii)(REQUIREMENTS - Retention of breaking strength after UV exposure of 144 h, percent)	-	0	-
7.2-Table 1- iv)(REQUIREMENTS - Colour fastness to artificial light)	-	0	-
7.2-Table 1- v)(REQUIREMENTS - Bursting pressure, kgf/cm2)	-	0	-

-
Included w.e.f 12.03.2025 Exclusion: Clause 8.1 (Length of the fencing nets)

6585

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

upto DN 315 mm

49275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	5825	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
7.2(Length)	-	0.0	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	800	ovality & visual appearance charges are inclusive
7.4.1.2(Ovality)	-	0.0	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.2(Longitudinal Reversion Test)	-	900	-
8.3(Carbon black)	-	1625	CBC & CBD ARE INCLUSIVE
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	-
8.9 table-6(Elongation at Break)	-	1600	-
8.10(Slow Crack Growth Rate)	-	6000	-
5.3 (a)(Carbon Black Master Batch)	-	925	-
5.3(d)(Carbon Black Master Batch)	-	950	-
6.2(Colour)	-	250	identification of stripes charges are inclusive
8.6(Overall migration)	-	2000	-

31 Dec, 2026

-
-

6586

HT Product Services Private Limited, Noida

8175006

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

100000 View breakup
Rs. 100000/- (for batteries upto 150 Ah, 30 V, for cells uto 300 Ah, 30V)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	0	-
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	4000	-
5.3(Venting)	-	0	-
5.4(Temperature, Voltage and Current Management)	-	0	-
5.5(Terminal Contacts)	-	0	-
5.6(Assembly of Cells into batteries)	-	0	-
5.7(Quality Plan)	-	0	-
5.8(Battery Safety Components)	-	0	-
6(Type Test and Sample Size)	-	5000	-
7(Specific requirements and tests)	-	0	-
7.1(Charging procedure for test purposes)	-	0	-
7.2(Intended Use)	-	14000	-
7.3(Reasonably foreseeable misuse)	-	77000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	0	-
9(Marking)	-	0	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

03 Dec, 2026

-
-

6587

HT Product Services Private Limited, Noida

8175006

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

For DC up to 250 V and AC up to 1000 V

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	3000	-
10(Protection against accidental contact with live parts)	-	3000	-
11(Mositure Resistance and Insulation)	-	4000	-
12(Electric Strength)	-	3500	-
13(Fault conditions)	-	2000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	2000	-
18(Resistance to heat, fire and tracking)	-	3000	-
19(Resistance to corrosion)	-	2000	-
21(Heat management)	-	1000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6588

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

up to 1000 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	5000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	5000	-
13.0(Endurance Tests and Thermal Tests)	-	15000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	10000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6589

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

up to 1000 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6(Marking)	-	2000	-
7(Construction)	-	3000	-
8(Creepage Distance and Clearances)	-	3000	-
9(Provision for earthing)	-	3000	-
10(Terminals)	-	4000	-
11(External & Internal Wiring)	-	4000	-
12(Protection against electric shock)	-	3000	-
13(Endurance Tests and Thermal Tests)	-	7000	-
14(Resistance to Dust and Moisture)	-	4000	-
15(Insulation Resistance and Electric Strength)	-	5000	-
16(Resistance to Heat , fire and tracking)	-	4000	-
17(Photometric Test)	-	6000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6590

HT Product Services Private Limited, Noida

8175006

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

up to 1000 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	7000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	4000	-
17.0(Photometric Test)	-	6000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6591

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

up to 1000 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2000	-
5(Classification of Luminaires')	-	2000	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	3000	-
10.0(Terminals)	-	4000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	7000	-
14.0(Resistance to Dust & Moisture)	-	4000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	4000	-
17.0(Photometric Test)	-	6000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6592

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

up to 250 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Packing -Each Package shall bear the following Particulars)	-	0	-
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	500	-
7.0(Construction)	-	5000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	3000	-
10.0(Terminals)	-	5000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	5000	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6593

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

up to 250 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	1000	-
20.6(Marking)	-	1000	-
20.7(Construction)	-	5000	-
20.8(Creepage Distance and Clearances)	-	3000	-
20.9(Provision for earthing)	-	1000	-
20.10(Terminals)	-	4000	-
20.11(External & Internal Wiring)	-	5000	-
20.12(Protection against electric shock)	-	5000	-
20.13(Endurance Tests and Thermal Tests)	-	5000	-
20.14(Resistance to Dust & Moisture)	-	5000	-
20.15(Insulation Resistance and Electric Strength)	-	5000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6594

HT Product Services Private Limited, Noida

8175006

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

up to 250 V

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	500	-
21.5(Classification of Luminaires')	-	500	-
21.6(Marking)	-	4000	-
21.7(Construction)	-	4000	-
21.8(Creepage Distance and Clearances)	-	4000	-
21.9(Provision for earthing)	-	4000	-
21.10(Terminals)	-	4000	-
21.11(External & Internal Wiring)	-	4000	-
21.12(Protection against electric shock)	-	4000	-
21.13(Endurance Tests and Thermal Tests)	-	4000	-
21.14(Resistance to Dust & Moisture)	-	4000	-
21.15(Insulation Resistance and Electric Strength)	-	4000	-
21.16(Resistance to Heat , fire and tracking)	-	4000	-
21.7.1(General)	-	4000	-
21.7.3(Terminals and supply connections)	-	4000	-
21.7.4(Control units)	-	4000	-
21.7.5(Mechanical strength)	-	4000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6595

HT Product Services Private Limited, Noida

8175006

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	5000	-
5.2(Capacity)	-	5000	-
5.3(SOC Adjustment)	-	5000	-
6.2.1(Vibration)	-	15000	-
6.2.2(Mechanical Shock)	-	10000	-
6.2.3(Crush)	-	10000	-
6.3.1(High Temperature Endurance)	-	10000	-
6.3.2(Temperature Cycling)	-	20000	-
6.4.1(External Short Circuit)	-	30000	-
6.4.2(Overcharge)	-	20000	-
6.4.3(Forced Discharge)	-	20000	-
6.4.4(Internal short circuit test)	-	40000	-
6.4.3(Forced Discharge)	-	0	-

03 Dec, 2026

-
Included w.e.f. 02.07.2024

6596

HT Product Services Private Limited, Noida

8175006

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

475000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	-
7.1(Charging Procedures For Test Purposes)	-	10000	-
7.2.1(External Short-Circuit Test)	-	30000	-
7.2.2(Impact Test)	-	20000	-
7.2.3(Drop Test)	-	10000	-
7.2.4(Thermal Abuse Test)	-	20000	-
7.2.5(Overcharge Test)	-	40000	-
7.2.6(Forced Discharge Test)	-	40000	-
7.3.2(Internal short-circuit test)	-	100000	-
7.3.3(Propagation Test)	-	150000	-
8(Battery System Safety)	-	40000	-
9(Information For Safety)	-	5000	-
10(Marking and Designation)	-	5000	-

03 Dec, 2026

-
Included w.e.f. 02.07.2024

6597

HT Product Services Private Limited, Noida

8175006

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	1500	-
5.2(Message Readability)	-	1500	-
6(Marking)	-	1500	-
"Cl.6.1 "(Marking)	-	1000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
4(Requirements)	-	1500	-
5(Tests)	-	1000	-
6(Marking)	-	1000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

6598

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

ALL

27900 View breakup
-

Clause No.	Exclusion	Remark
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connection)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cables and Cords)	-	-
24(Component)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
18(Endurance)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	-
7(Marking/ Marking & Instructions)	-	-
6(Classification)	-	-
22.32(CONSTRUCTION)	-	-

08 Feb, 2027

-
Included w.e.f 07.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7

6599

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 2993 : Part 2 (2024)

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

358250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1.1(General)	-	4000	-
5.1.7(Voltage test between the terminals)	-	9000	-
5.1.8(Voltage test between terminals and case)	-	9000	-
5.1.9(Capacitance measurement)	-	31500	capacitance measurement charge is 13500 & Tangent of loss angle charge is 18000
5.1.10(Check of dimensions)	-	4000	-
5.1.11.1(Robustness of terminations)	-	36000	-
5.1.11.2(Soldering)	-	5000	-
5.1.11.3(Vibration)	-	21500	Vibration charge is : 20000 & Fixing bolt charge is: 1500
5.1.12(Sealing test)	-	9000	-
5.1.13(Endurance test)	-	95000	-
5.1.14(Damp heat test)	-	66000	-
5.1.15(Self-healing test)	-	9000	-
5.1.16(Destruction test)	-	44250	-
5.1.17.1(Ball-pressure test)	-	3000	-
5.1.17.2(Glow-wire test)	-	3000	-
5.1.17.3(Tracking test)	-	5000	-
5.2(Overloads)	-	0	-
5.3.1(Creepage distances and clearances)	-	0	-
5.3.2(Terminals and connecting cables)	-	0	-
5.3.3(Earth connections)	-	0	-
5.3.4(Discharge devices)	-	0	-
5.3.5(Pollution)	-	0	-
5.4(Marking)	-	4000	-
6.1.6(Voltage test between the terminals)	-	9000	For Electrolytic motor start capacitors
6.1.7(Voltage test between terminals and case)	-	9000	For Electrolytic motor start capacitors
6.1.8(Capacitance and power factor measurement)	-	15000	For Electrolytic motor start capacitors
6.1.9(Check of dimensions)	-	4000	For Electrolytic motor start capacitors
6.1.10.1(Robustness of terminations)	-	36000	For Electrolytic motor start capacitors
6.1.10.2(Soldering)	-	5000	For Electrolytic motor start capacitors
6.1.10.3(Vibration)	-	20000	For Electrolytic motor start capacitors
6.1.10.4(Fixing bolt or stud (if fitted))	-	1500	-
6.1.10.5(Rapid change of temperature)	-	10000	For Electrolytic motor start capacitors
6.1.11(Sealing test)	-	9000	For Electrolytic motor start capacitors
6.1.12(Endurance test)	-	95000	For Electrolytic motor start capacitors
6.1.13(Damp heat test)	-	66000	For Electrolytic motor start capacitors
6.1.14(Pressure relief test)	-	5000	For Electrolytic motor start capacitors
6.1.15.1(Ball-pressure test)	-	3000	For Electrolytic motor start capacitors
6.1.15.2(Glow-wire test)	-	3000	For Electrolytic motor start capacitors
6.1.15.3(Tracking test)	-	5000	For Electrolytic motor start capacitors
6.2(Overloads)	-	0	-
6.3.1(Creepage distances and clearances)	-	0	-
6.3.2(Terminals and connecting cables)	-	0	-
6.3.3(Earth connections)	-	0	-
6.3.4(Discharge devices)	-	0	-
6.3.5(Pollution)	-	0	-
6.4(Marking)	-	4000	For Electrolytic motor start capacitors
7.2.1(Measurement of working voltage)	-	0	-
7.2.2(Influence of capacitance)	-	0	-
7.3(Checking capacitor temperature)	-	0	-
7.4(Checking transients)	-	0	-
7.5(Storage of electrolytic capacitors)	-	0	-
Annex A(Test voltage)	-	0	-
5.1.10(Check of dimensions)	-	0	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	0	-
5.1.1.1(General)	-	-	-
5.1.7(Voltage test between the terminals)	-	-	-
5.1.8(Voltage test between terminals and case)	-	-	-
5.1.9(Capacitance measurement)	-	-	-
5.1.10(Check of dimensions)	-	-	-
5.1.11.1(Robustness of terminations)	-	-	-
5.1.11.2(Soldering)	-	-	-
5.1.11.3(Vibration)	-	-	-
5.1.12(Sealing test)	-	-	-
5.1.13(Endurance test)	-	-	-
5.1.14(Damp heat test)	-	-	-
5.1.15(Self-healing test)	-	-	-
5.1.16(Destruction test)	-	-	-
5.1.17.1(Ball-pressure test)	-	-	-
5.1.17.2(Glow-wire test)	-	-	-
5.1.17.3(Tracking test)	-	-	-
5.2(Overloads)	-	-	-
5.3.1(Creepage distances and clearances)	-	-	-
5.3.2(Terminals and connecting cables)	-	-	-
5.3.3(Earth connections)	-	-	-
5.3.4(Discharge devices)	-	-	-
5.3.5(Pollution)	-	-	-
5.4(Marking)	-	-	-
6.1.6(Voltage test between the terminals)	-	-	-
6.1.7(Voltage test between terminals and case)	-	-	-
6.1.8(Capacitance and power factor measurement)	-	-	-
6.1.9(Check of dimensions)	-	-	-
6.1.10.1(Robustness of terminations)	-	-	-
6.1.10.2(Soldering)	-	-	-
6.1.10.3(Vibration)	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-
6.1.10.5(Rapid change of temperature)	-	-	-
6.1.11(Sealing test)	-	-	-
6.1.12(Endurance test)	-	-	-
6.1.13(Damp heat test)	-	-	-
6.1.14(Pressure relief test)	-	-	-
6.1.15.1(Ball-pressure test)	-	-	-
6.1.15.2(Glow-wire test)	-	-	-
6.1.15.3(Tracking test)	-	-	-
6.2(Overloads)	-	-	-
6.3.1(Creepage distances and clearances)	-	-	-
6.3.2(Terminals and connecting cables)	-	-	-
6.3.3(Earth connections)	-	-	-
6.3.4(Discharge devices)	-	-	-
6.3.5(Pollution)	-	-	-
6.4(Marking)	-	-	-
7.2.1(Measurement of working voltage)	-	-	-
7.2.2(Influence of capacitance)	-	-	-
7.3(Checking capacitor temperature)	-	-	-
7.4(Checking transients)	-	-	-
7.5(Storage of electrolytic capacitors)	-	-	-
Annex A(Test voltage)	-	-	-
5.1.10(Check of dimensions)	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-

20 Jun, 2028

-
Included w.e.f 05.11.2024

6600

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 2993 : Part 2 (2024)

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1.1(General)	-	1000	5% discount for BIS
5.1.7(Voltage test between the terminals)	-	10000	5% discount for BIS
5.1.8(Voltage test between terminals and case)	-	10000	5% discount for BIS
5.1.9(Capacitance measurement)	-	25000	5% discount for BIS
5.1.10(Check of dimensions)	-	6000	5% discount for BIS
5.1.10(Check of dimensions)	-	6000	5% discount for BIS
5.1.11.1(Robustness of terminations)	-	5000	5% discount for BIS
5.1.11.2(Soldering)	-	5000	5% discount for BIS
5.1.11.3(Vibration)	-	15000	5% discount for BIS
5.1.12(Sealing test)	-	15000	5% discount for BIS
5.1.13(Endurance test)	-	80000	5% discount for BIS
5.1.14(Damp heat test)	-	50000	5% discount for BIS
5.1.15(Self-healing test)	-	75000	5% discount for BIS
5.1.16(Destruction test)	-	80000	5% discount for BIS
5.1.17.1(Ball-pressure test)	-	3000	5% discount for BIS
5.1.17.2(Glow-wire test)	-	3000	5% discount for BIS
5.1.17.3(Tracking test)	-	3000	5% discount for BIS
5.2(Overloads)	-	3000	5% discount for BIS
5.3.1(Creepage distances and clearances)	-	2000	5% discount for BIS
5.3.2(Terminals and connecting cables)	-	5000	5% discount for BIS
5.3.3(Earth connections)	-	1000	5% discount for BIS
5.3.4(Discharge devices)	-	1000	5% discount for BIS
5.3.5(Pollution)	-	1000	5% discount for BIS
5.4(Marking)	-	1000	5% discount for BIS
6.1.6(Voltage test between the terminals)	-	10000	5% discount for BIS
6.1.7(Voltage test between terminals and case)	-	10000	5% discount for BIS
6.1.8(Capacitance and power factor measurement)	-	25000	5% discount for BIS
6.1.9(Check of dimensions)	-	10000	5% discount for BIS
6.1.10.1(Robustness of terminations)	-	10000	5% discount for BIS
6.1.10.2(Soldering)	-	5000	5% discount for BIS
6.1.10.3(Vibration)	-	15000	5% discount for BIS
6.1.10.4(Fixing bolt or stud (if fitted))	-	5000	5% discount for BIS
6.1.10.4(Fixing bolt or stud (if fitted))	-	5000	5% discount for BIS
6.1.10.5(Rapid change of temperature)	-	45000	5% discount for BIS
6.1.11(Sealing test)	-	15000	5% discount for BIS
6.1.12(Endurance test)	-	80000	5% discount for BIS
6.1.13(Damp heat test)	-	50000	5% discount for BIS
6.1.14(Pressure relief test)	-	75000	5% discount for BIS
6.1.15.1(Ball-pressure test)	-	3000	5% discount for BIS
6.1.15.2(Glow-wire test)	-	3000	5% discount for BIS
6.1.15.3(Tracking test)	-	3000	5% discount for BIS
6.2(Overloads)	-	3000	5% discount for BIS
6.3.1(Creepage distances and clearances)	-	3000	5% discount for BIS
6.3.2(Terminals and connecting cables)	-	6000	5% discount for BIS
6.3.3(Earth connections)	-	2000	5% discount for BIS
6.3.4(Discharge devices)	-	3000	5% discount for BIS
6.3.5(Pollution)	-	2000	5% discount for BIS
6.4(Marking)	-	5000	5% discount for BIS
7.2.1(Measurement of working voltage)	-	2000	5% discount for BIS
7.2.2(Influence of capacitance)	-	2000	5% discount for BIS
7.3(Checking capacitor temperature)	-	2000	5% discount for BIS
7.4(Checking transients)	-	2000	5% discount for BIS
7.5(Storage of electrolytic capacitors)	-	2000	5% discount for BIS
Annex A(Test voltage)	-	2000	5% discount for BIS
5.1.1.1(General)	-	-	-
5.1.7(Voltage test between the terminals)	-	-	-
5.1.8(Voltage test between terminals and case)	-	-	-
5.1.9(Capacitance measurement)	-	-	-
5.1.10(Check of dimensions)	-	-	-
5.1.10(Check of dimensions)	-	-	-
5.1.11.1(Robustness of terminations)	-	-	-
5.1.11.2(Soldering)	-	-	-
5.1.11.3(Vibration)	-	-	-
5.1.12(Sealing test)	-	-	-
5.1.13(Endurance test)	-	-	-
5.1.14(Damp heat test)	-	-	-
5.1.15(Self-healing test)	-	-	-
5.1.16(Destruction test)	-	-	-
5.1.17.1(Ball-pressure test)	-	-	-
5.1.17.2(Glow-wire test)	-	-	-
5.1.17.3(Tracking test)	-	-	-
5.2(Overloads)	-	-	-
5.3.1(Creepage distances and clearances)	-	-	-
5.3.2(Terminals and connecting cables)	-	-	-
5.3.3(Earth connections)	-	-	-
5.3.4(Discharge devices)	-	-	-
5.3.5(Pollution)	-	-	-
5.4(Marking)	-	-	-
6.1.6(Voltage test between the terminals)	-	-	-
6.1.7(Voltage test between terminals and case)	-	-	-
6.1.8(Capacitance and power factor measurement)	-	-	-
6.1.9(Check of dimensions)	-	-	-
6.1.10.1(Robustness of terminations)	-	-	-
6.1.10.2(Soldering)	-	-	-
6.1.10.3(Vibration)	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	-	-
6.1.10.5(Rapid change of temperature)	-	-	-
6.1.11(Sealing test)	-	-	-
6.1.12(Endurance test)	-	-	-
6.1.13(Damp heat test)	-	-	-
6.1.14(Pressure relief test)	-	-	-
6.1.15.1(Ball-pressure test)	-	-	-
6.1.15.2(Glow-wire test)	-	-	-
6.1.15.3(Tracking test)	-	-	-
6.2(Overloads)	-	-	-
6.3.1(Creepage distances and clearances)	-	-	-
6.3.2(Terminals and connecting cables)	-	-	-
6.3.3(Earth connections)	-	-	-
6.3.4(Discharge devices)	-	-	-
6.3.5(Pollution)	-	-	-
6.4(Marking)	-	-	-
7.2.1(Measurement of working voltage)	-	-	-
7.2.2(Influence of capacitance)	-	-	-
7.3(Checking capacitor temperature)	-	-	-
7.4(Checking transients)	-	-	-
7.5(Storage of electrolytic capacitors)	-	-	-
Annex A(Test voltage)	-	-	-

04 Jul, 2027

-
Included.w.e.f.05.11.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number