BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6631

BIS, Eastern Regional Laboratory (ERL)

None

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

5550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 D Drums Figure 1))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 C Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
5 (Dimensions (Type 1 D Drums Figure 2))	-
6 (Material)	-
7 (Construction)	-
7.1 (Construction)	-
7.2 (Construction)	-
7.3 (Construction)	-
7.4 (Construction)	-
7.5 (Construction)	-
7.7 (Construction)	-
8 (Finish )	-
9.1 (Leakage at air pressure )	-
9.2 (Drop Test)	-
9.3 (Hydraulic Pressure Test)	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 C Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
5 (Dimensions (Type 2 D Drums Figure 2))	-
6 (Material)	-
5 (Dimensions (Type 1 C Drums Figure 1))	-

-
Except Mech: 9.2 Drop Test,9.3 Hydraulic Pressure Test

6632

BIS, Eastern Regional Laboratory (ERL)

None

IS 16984 (2018)

Folding box board for general consumer product packaging - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Partial; Chem(except OBA (optical brightening agent), Anthraquinone, Dioxins and Furans,Pentachlorophenol (PCP), Polychlorinated biphenyls) Mech(except Cl 5.9 table 1 bulk, Cobb, Brightness, Gloss, IGT Dry Pick, Roughness. Cl 5.7 Stiffness

6633

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

ELECTRICAL

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	500	-
Cl.31(Verification)	-	500	-
Cl.30(Verification)	-	500	-
CL.29(Verification)	-	500	-
Cl.28(Verification)	-	500	-
Cl.27(Verification)	-	500	-
Cl.26(Verification)	-	500	-
Cl.25(Verification)	-	500	-
Cl.24(Verification)	-	500	-
Cl.23(Verification)	-	500	-
Cl.22(Verification)	-	500	-
Cl.21(Verification)	-	500	-
Cl.20(Verification)	-	500	-
Cl.19(Verification)	-	500	-
Cl.17(Verification)	-	500	-
Cl. 16(Verification)	-	500	-
Cl.15(Verification)	-	500	-
Cl.14(Verification)	-	500	-
Cl.13(Verification)	-	500	-
Cl.11(Verification)	-	500	-
Cl.10(Verification)	-	500	-
Cl.8(Verification)	-	500	-
Cl. 7(Verification)	-	500	-
Cl. 7(Verification)	-	500	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-35(Endurance)	-	500	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	500	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-35(Endurance)	-	500	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	500	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENT)	-	500	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	-
Cl. 18 IS 302-2-35(Endurance)	-	500	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	500	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENT)	-	500	-

-
Included w.e.f 25.03.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

6634

Aaditech Test and Calibration Lab LLP

8179926

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

ELECTRICAL

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	100	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	100	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	100	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	100	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	100	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	100	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	100	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	100	-
Cl.18 of IS 368:2014(Endurance)	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	100	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	100	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	100	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	100	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(GENERAL REQUIREMENT)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	100	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	100	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	100	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	100	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	100	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	100	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	100	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	100	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	100	-
Cl.18 of IS 368:2014(Endurance)	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	100	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.24 of IS 302-2-201: 2008(Component)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	100	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	100	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	100	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	100	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	100	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	100	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	100	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(GENERAL REQUIREMENT)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-

-
INCLUDED w.e.f 03.02.2025 Exclusion : Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

6635

Shri Krishna Test House

8122336

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

All types

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of material and designation)	-	7000	-
Cl-5(Manufacturer)	-	7000	-
Cl-6(Aluminium for use as matrix)	-	7000	-
Cl-6(Top-surface of the aluminium matrix)	-	7000	-
Cl-6(Bottom-surface of the aluminium matrix)	-	7000	-
Cl-7.1.1(Tensile properties)	-	7000	-
Cl-7.1.1(Apparent Yield Strength)	-	7000	-
Cl-7.1.1(Tensile Strength Mpa,)	-	7000	-
Cl-7.1.2(Test Specimen)	-	7000	-
Cl-7.1.3(Test Parameters)	-	7000	-
Cl-7.2.1(Bond strength of Tri-Ply)	-	7000	-
Cl-7.2.2(Sample Preparation and Test Specimen)	-	7000	-
Cl-7.2.3(Test Apparatus)	-	7000	-
Cl-7.2.4(Procedure)	-	7000	-
Cl-8.1(Sample of suitable size)	-	7000	-
Cl-8.2(specimen for peel strength)	-	7000	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	7000	-
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	7000	-
Cl-9.1(Thickness)	-	7000	-
Cl-9.2(Diameter)	-	7000	-
Cl-9.3(Flatness)	-	7000	-
Cl-10(surface finish)	-	7000	-
Cl-11(Workmanship, finish and appearance)	-	7000	-
Cl-14(Marking)	-	7000	-

05 Oct, 2028

-
Included w.e.f. 20.01.2025

6636

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

All Type

15900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	4500	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1500	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	2500	-
Cl-7.2(Reversion Test)	-	1500	-
Cl-7.3(Tensile Test)	-	1500	-
Cl-7.3.1(Test Piece)	-	1000	-
Cl-7.3.2(Procedure)	-	500	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1500	-
Cl-8.0(Supply of pipes)	-	500	-
Cl-9.0(Coiling)	-	500	-
Cl-10.0(Sampling and criteria for conformity)	-	500	-
Cl-11(Marking)	-	500	-
3(Class of Pipe)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	2500	-
7.1 & Table 2(Hydraulic Characteristics)	-	2500	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Strength)	-	1500	-
7.3(Elongation at Break)	-	1500	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1500	-
4.2(a)(Carbon Black Content-IS 2530)	-	1500	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1500	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	2500	-

-
Included w.e.f 08.05.2025

6637

National Test House (WR) - NTH, Mumbai

7107604

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	10000	i)Size up to 200 mm. Dia. ii)Acceptance test fee: 18000/- iii)Type test fee(inclusive of 1000 hrs. test): 27000/-for BIS
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	1000	-
8.7(Density)	-	1000	-
8.5 (Oxidation Induction Time)	-	1000	-
8.4( Melt Flow Rate)	-	2000	-
8.2(Longitudinal Reversion Test)	-	1000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	5000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	5000	-
7.4.1.2(Ovality)	-	500	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1000	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	2000	-
8.3(Carbon black)	-	1500	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	2000	-
5.2(Volatile matter Content)	-	1000	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 8.3(Carbon Black content)	-	1500	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
Clause 8.6(Overall migration (stimulate))	-	2000	-
Clause 8.6(Overall migration (surface of material))	-	2000	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	1000	-
Cl. 8.3(Carbon Black Content)	-	1500	-
Cl. 8.3(Carbon Black Dispersion)	-	1000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.7(Density-IS 7328:2020)	-	1000	-
8.7(Corrected Density- IS 7328:2020)	-	1000	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
Cl 8.3(Carbon Black Content)	-	1500	-
Cl 8.3(Carbon Black Dispersion)	-	1000	-
Clause 7.3(Coiling)	-	500	-
7()	-	0	-
8.10(Slow Crack Growth Rate)	-	10000	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	2000	-
5.2(Volatile matter Content)	-	1000	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 8.3(Carbon Black content)	-	1500	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
Clause 8.6(Overall migration (stimulate))	-	2000	-
Clause 8.6(Overall migration (surface of material))	-	2000	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	1000	-
Cl. 8.3(Carbon Black Content)	-	1500	-
Cl. 8.3(Carbon Black Dispersion)	-	1000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.7(Density-IS 7328:2020)	-	1000	-
8.7(Corrected Density- IS 7328:2020)	-	1000	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
Cl 8.3(Carbon Black Content)	-	1500	-
Cl 8.3(Carbon Black Dispersion)	-	1000	-
Clause 7.3(Coiling)	-	500	-
7()	-	0	-

24 Jul, 2025

-
Included .w.e.f.10.02.2025 Exclusion Cl 5.4 (Anti Oxydent) Cl 5.3 (a) (Carbon black master batch) Cl 5.3 (b) (Carbon black master batch) Cl 5.3 (c) (Carbon black master batch) Cl 5.3 (b) (Carbon black master batch) Cl 5.3 (e) (Carbon black master batch) Cl 5.3 (Polyethylene Resin) Cl 5.3 (Toluene Extract)

6638

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

Storage Water Heaters

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	0	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	0	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
22.101(rated pressure)	-	0	-
22.102(Closed water heaters)	-	0	-
22.103(Addition)	-	0	-
22.104(Addition)	-	0	-
22.105(Cistern-type water heaters)	-	0	-
22.109(Addition)	-	0	-
24(Components)	-	0	-
A.101(Pressure test)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	0	-
30(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
22.101(rated pressure)	-	0	-
22.102(Closed water heaters)	-	0	-
22.103(Addition)	-	0	-
22.104(Addition)	-	0	-
22.105(Cistern-type water heaters)	-	0	-
22.109(Addition)	-	0	-
A.101(Pressure test)	-	0	-
32(Radiation, toxicity and similar hazards)	-	0	-

11 Apr, 2028

-
Included w.e.f 23.01.2025 Exclusion : Cl 19.11.4.1- Cl 19.11.4.7, Cl 12 (Charging of metal-ion batteries), Cl 24 (Components)

6639

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1000	-
IS 191:2007 & IS 440(Copper purity test)	-	1000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	4000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	4000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	4000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	4000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	4000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	4000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	2000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	2000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	5000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	5000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	500	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	5000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	4000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	6000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	6000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	6000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	6000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	500	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	6000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	6000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	0	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	0	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	0	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	0	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	0	-

15 Aug, 2028

-
Included w.e.f 05.05.2025

6640

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

11200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	3775.00	Identification: 1050/- CBC: 925/- Toluene Extract: 1100/- Volatile Matter: 700/- Additional GST as applicable
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925.00	Additional GST as applicable
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	Additional GST as applicable
Cl-6.0(Visual Appearance)	-	500	Additional GST as applicable
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1000.00	Additional GST as applicable
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	3000.00	Additional GST as applicable
Cl-7.2(Reversion Test)	-	1200	700/- test charges + 500/- sample preparation
Cl-7.3(Tensile Test)	-	1800.00	1300/- test charges + 500/- sample preparation
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200.00	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.1 & Table 2(Hydraulic Characteristics)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Strength)	-	0	-
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	0	-
4.2(a)(Carbon Black Content-IS 2530)	-	925.00	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700.00	-

-
Included w.e.f. 20.01.2025

6641

National Test House (WR) - NTH, Mumbai

7107604

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Marking )	-	200	-
6(Rating )	-	200	-
7(Classification)	-	200	-
9.1(Dimensions)	-	500	-
10(Protection against electric shock )	-	300	-
12(Provision for Earthing)	-	200	-
11.1(Terminals)	-	200	-
13.1(Construction)	-	300	-
14(Construction)	-	200	-
15.1(Moisture Resistance, Insulation Resistance and Electric Strength)	-	500	-
16.1(Mechanical Strength)	-	1000	-
17(Screws,current-carrying parts and connections)	-	200	-
18(Creepage distances and Clearances)	-	500	-
19.1(General resistance to heat)	-	500	-
20.1(Resistance to heat, fire and tracking)	-	500	-
21.1(Resistance to excessive residual stresses and to rusting)	-	500	-
8.1(Marking )	-	500	-
6(Rating )	-	500	-
7(Classification)	-	500	-
10(Protection against electric shock )	-	500	-
12(Provision for Earthing)	-	500	-
11.1(Terminals)	-	500	-
13.1(Construction)	-	500	-
14(Construction)	-	500	-
16.1(Mechanical Strength)	-	500	-
17(Screws,current-carrying parts and connections)	-	500	-

24 Jul, 2025

-
-

6642

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1545 (1994)

Solid drawn coppbr and copper alloy tubes for condensers and heat exchangers - Specification (Third Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No.8.1(Dimensions)	-	500	-
Cl. No.8.2(Tolerances)	-	500	-
Cl. No.9.1, Table no.1(i)(Chemical composition-Copper)	-	300	-
Cl. No.9.1, Table no.1(ii)(Lead)	-	300	-
Cl. No.9.1, Table no.1(iii)(Tin)	-	300	-
Cl. No.9.1, Table no.1(iv)(Iron)	-	300	-
Cl. No.9.1, Table no.1(v)(Aluminium)	-	300	-
Cl. No.9.1, Table no.1(vi)(Mangenese)	-	300	-
Cl. No.9.1, Table no.1(vi)(Arsenic)	-	300	-
Cl. No.9.1, Table no.1(vii)(Nickle)	-	300	-
Cl. No.9.1, Table no.1(iv)(Zinc)	-	300	-
Cl. No.9.1, Table no.1(iv)(Phosphorus)	-	300	-
Cl. No.9.1, Table no.1(iv)(T.L)	-	300	-
Cl. No.10.1.1(Hardness test)	-	1500	-
Cl. No.10.1.2(Tensile Test)	-	2000	-
Cl. No.10.2, Table no.2(Flattening Test)	-	1200	-
Cl. No.10.3(Drift Expanding Test)	-	1500	-
Cl. No.10.5(Microscopic Examination)	-	2500	-
Cl. No.10.6.1(Ammonia Vapour Cracking Test)	-	2500	-
Cl. No.10.6.2(Mercurous Nitrate Test)	-	2000	-

view Scope file
Included w.e.f 09.04.2025 Exclusion: Cl. No.10.4.1 (Eddy-Current Test)

6643

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	1500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	1500	-
Cl 4.2(Thickness of the finished utensil)	-	1500	-
Cl 4.3(Classification)	-	500	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	1500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	1500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	1500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	1500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	1000	-
CL 5.2(Accessibility for cleaning)	-	1000	-
Cl 5.3(Joining of handles to the utensils)	-	2500	-
Cl 5.4(Requirement for handles)	-	12000	-
Cl 5.5(Welding (Finish))	-	1000	-
Cl 5.6(Finish of 3-ply utensil)	-	1000	-
Cl 5.7(Requirement for coating)	-	1000	-
Cl 5.8(Coating thickness test)	-	1500	-
Cl 5.8(Coating adhesion test)	-	1500	-
Cl 5.8.1(Thermal shock test (Coating))	-	4000	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	4000	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	1500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	5000	-
Cl 6.7(Nominal Capacity Test)	-	1000	-
Cl 8(Marking)	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	1500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	2000	-
Cl 3.1(Material used for manufacturing utensils)	-	0	-
Cl 3.2(Material used for composite bottom)	-	0	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	0	-
Cl 3.4(Material used for stainless steel lid)	-	0	-
Cl 3.5(Material used for tempered glass lid)	-	0	-
Cl 3.5(Material used for stainless steel rim)	-	0	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	0	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	0	-
Cl 4.2(Thickness of the finished utensil)	-	0	-
Cl 4.3(Classification)	-	0	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	0	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	0	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	0	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	0	-
Cl 5.1(Manufacturing defect & visual appearance)	-	0	-
CL 5.2(Accessibility for cleaning)	-	0	-
Cl 5.3(Joining of handles to the utensils)	-	0	-
Cl 5.4(Requirement for handles)	-	0	-
Cl 5.5(Welding (Finish))	-	0	-
Cl 5.6(Finish of 3-ply utensil)	-	0	-
Cl 5.7(Requirement for coating)	-	0	-
Cl 5.8(Coating thickness test)	-	0	-
Cl 5.8(Coating adhesion test)	-	0	-
Cl 5.8.1(Thermal shock test (Coating))	-	0	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	0	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	0	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	0	-
Cl 6.7(Nominal Capacity Test)	-	0	-
Cl 8(Marking)	-	0	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	0	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	0	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	0	-

25 Feb, 2027

-
-

6644

DELHI TEST HOUSE, Azadhpur

8131406

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Materials)	-	5500	NA
Cl 3.2(Classification)	-	250	NA
Cl 3.2.1(Blend Name)	-	0	NA
Cl 3.3(Fit)	-	1000	NA
Cl 3.3.1(Thickness Uniformity)	-	1000	NA
Cl 4.1.1(Elongation)	-	1000	NA
Cl 4.1.2(Strength of Splice)	-	1000	NA
Cl 4.1.3(Set After Ageing)	-	1000	NA
Cl 4.1.4(Accelerated Ageing)	-	3500	NA
Cl 5(AIR TIGHTNESS)	-	1500	NA
Cl 6(MARKING)	-	500	NA
Cl 3.1(Materials)	-	-	-
Cl 3.2(Classification)	-	-	-
Cl 3.2.1(Blend Name)	-	-	-
Cl 3.3(Fit)	-	-	-
Cl 3.3.1(Thickness Uniformity)	-	-	-
Cl 4.1.1(Elongation)	-	-	-
Cl 4.1.2(Strength of Splice)	-	-	-
Cl 4.1.3(Set After Ageing)	-	-	-
Cl 4.1.4(Accelerated Ageing)	-	-	-
Cl 5(AIR TIGHTNESS)	-	-	-
Cl 6(MARKING)	-	-	-

17 Jun, 2027

-
Included w.e.f. 21.01.2025

6645

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Rs. 9462 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Thickness of the finished utensil)	-
Cl 4.3 (Classification)	-
Cl 5.1 (Manufacturing defect & visual appearance)	-
CL 5.2 (Accessibility for cleaning)	-
Cl 5.4 (Requirement for handles)	-
Cl 5.6 (Finish of 3-ply utensil)	-
Cl 5.8 (Coating thickness test)	-
Cl 5.8.1 (Thermal shock test (Coating))	-
Cl 6.1 (Staining Test (Type Test - Frequency Once in a Year))	-
Cl 6.2 (Mechanical Shock Test (for Cladded Utensils Only))	-
Cl 6.3 (Thermal Shock Test (for Cladded Utensils Only))	-
Cl 6.4 (Dry Heat Test (for Cladded Utensils Only))	-
Cl 6.5 (Coating Thickness Test (for Copper Deposit))	-
Cl 6.6 (Thermal shock test (3-ply construction utensil body))	-
Cl 6.7 (Nominal Capacity Test)	-
5.4 of IS 13395 (Impact Strength)	-
4.4 of Is 13395 (Position of Handle and Knob with Respect to Cookware)	-
4.5 of IS 13395 (Attachment to Cookware)	-
5.2 of IS 13395 (Bending Strength)	-
5.3 of IS 13395 (Torque Strength)	-
5.5 of IS 13395 (Fatigue Resistance 15 000 cycles withstand)	-
5.8 of IS 13395 (Heat Resistance)	-
5.10 of IS 13395 (Burning Resistance)	-
6.7.2 (Internal diameter of utensil)	-
6.1 (Staining Test)	-
4.2 of IS 13395 (Materials)	-
4.3 of IS 13395 (Selection and Size)	-
Cl 3.5 (Material used for tempered glass lid)	-
Cl 3.5 (Material used for stainless steel rim)	-
4.1 of IS 13395 (Construction)	-
5.6 of IS 13395 (Leakage)	-
5.7 of IS 13395 (Thermal Insulation)	-

-
Expect material testing

6646

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 6192 (2023)

Textiles Monoaxially oriented high density polyethylene HDPE and polypropylene PP tapes Specification

HDPE & PP Tape

18630.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(High Density Polyethylene Tapes)	-	4300.00	Density: 700/- plus 500/- (Specimen preparation) MFI: 1100/- Identification: 2000/- GST as Applicable & 25 % Discount on test charges only for BIS
Cl-4.2(Polypropylene Tapes)	-	4300.00	Density: 700/- plus 500/- (Specimen preparation) MFI: 1100/- Identification: 2000/- GST as Applicable & 25 % Discount on test charges only for BIS
Cl-4.3(Additives and Masterbatches)	-	0	-
Cl-5.1.1(Finished tape width)	-	500	-
Cl-5.1.2(Thickness of the tape)	-	500	-
Cl-5.1.3(Linear density of tape)	-	700	-
Cl-5.1.4(Polypropylene Tapes)	-	1100	1100/- for Tenacity, Elongation at break & Strength
Cl-5.1.5(Average value of the elongation at break of tape)	-	0	-
Cl-5.1.6(UV radiation exposure)	-	10180.00	For 192 hrs. UV Conditioning
Cl-5.1.6(UV stabilized HDPE and PP resins)	-	1100	for tenacity after UV
Cl-5.1.7(Average heat shrinkage of HDPE tapes)	-	1700.00	-
Cl-5.1.8(Ash Content)	-	1200.00	-
Cl-6.1(Marking)	-	0	-

-
Included w.e.f. 20.01.2025

6647

PIBCO LIMITED R&D CENTRE

8184506

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

category B Only

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	0	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Length )	-	0	-
5,Table 1(Width )	-	0	-
5,Table 1(Thickness)	-	0	-
5,Table 1(Specific Gravity)	-	0	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	0	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	0	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0	-
5,Table 1(Tear resistance (machine direction))	-	0	-
5,Table 1(Tear resistance (Cross direction))	-	0	-
5,Table 1(Index puncture resistance,N)	-	0	-
5,Table 1(Low temperature crack resistance)	-	0	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	0	-
5,Table 1(Seam strength,kg,Min)	-	0	-
5,Table 1(Volatile Loss ,% ,Max)	-	0	-
5,Table 1(Peel strength,kN/m,Min)	-	0	-
5,Table 1(Resistance to soil burial)	-	0	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	0	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	0	-
5,Table 1(Tensile strength (Transverse),% change)	-	0	-
5,Table 1(Elongation at break (Transverse),% change)	-	0	-
5,Table 1(Water extraction,% loss in weight)	-	0	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	0	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0	-
6.0(Dimensions and tolerances)	-	2000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	1000	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1500	-
5, Table-2(Elongation at break (Transverse))	-	1500	-
5, Table-2(Tear Strength (Machine direction))	-	1500	-
5, Table-2(Tear Strength (Cross direction))	-	1500	-
5, Table-2(Behaviour during perforation)	-	3000	-
5, Table-2(Height of fall without perforation)	-	3000	-
5, Table-2(Cold crack resistance at low temperature)	-	3000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	5000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	3000	-
5, Table-2(Change in length after heating)	-	1500	-
5, Table-2(Change in width after heating)	-	1500	-
5, Table-2(Resistance to acid and alkali)	-	20000	-
5, Table-2(Strength of welded seam shear resistance)	-	3000	-
5, Table-2(Resistance to static puncturing)	-	5000	-
5, Table-2(Horizontal rate of burning)	-	12500	-
5, Table-2(Vertical rate of burning)	-	12500	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 2(Specific Gravity)	-	1000	-

23 Mar, 2028

-
Exclusion: Cl 5,Table 1

6648

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

Personal Protective Equipment Part 2 Safety Footwear

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	100	-
Cl 5.2.2, Table 4(" Height of upper ")	-	150	-
Cl 5.2.3(Heel area)	-	100	-
Cl 5.3.1.1(Construction of whole footwear)	-	100	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	600	-
Cl 5.3.2.1(Toe protection - general)	-	100	-
Cl 5.3.2.2(Internal length)	-	250	-
Cl 5.3.2.3(Width of toecap flange)	-	100	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	600	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	600	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	600	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1800	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	350	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3500	-
Cl 5.3.7(Seam strength)	-	600	-
Cl 5.3.8(Lead Content ( National Annex A))	-	600	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.2(Thickness)	-	600	-
Cl 5.4.3(Tear strength)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	600	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	600	-
Cl 5.4.5(Flexing resistance)	-	600	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	600	-
Cl 5.4.7(Resistance to hydrolysis)	-	1200	-
Cl 5.5.2(Lining- Tear strength)	-	600	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	600	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	600	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	600	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	600	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	600	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	600	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	600	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	500	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	500	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	600	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	2500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	2500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	100	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.2(Design)	-	0	-
Cl 5.2.2, Table 4(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2.1(Toe protection - general)	-	0	-
Cl 5.3.2.2(Internal length)	-	0	-
Cl 5.3.2.3(Width of toecap flange)	-	0	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	-
Cl 5.3.2.6(Impact resistance)	-	0	-
Cl 5.3.2.7(Compression resistance)	-	0	-
Cl 5.3.3(Leak proofness)	-	0	-
Cl 5.3.4("Specific ergonomic features ")	-	0	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.7(Seam strength)	-	0	-
Cl 5.3.8(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.8.3(Resistance to cutting)	-	0	-
Cl 6.2.9(Scuff cap)	-	0	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7, Table 20("Marking ")	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-

-
Included w.e.f. 17.02.2025 Exclusion: Cl 6.2.6.2 ("Metatarsal protection-Impact resistance of metatarsal protective device "), Cl 6.2.7 (Ankle protection), Cl 6.2.6.1 (Metatarsal protection - Construction)

6649

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Rated Voltage Being Not more then 250 V for single - phase appliances and 480 V for Other Appliances Including Direct Current (DC) Supplied appliances and Battery Operated appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	20% Discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount to BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% Discount to BIS
10.1(Power input)	-	1000	20% Discount to BIS
10.2(Current input)	-	1000	20% Discount to BIS
11.1(General)	-	500	20% Discount to BIS
11.2(General)	-	500	20% Discount to BIS
11.3(Heating)	-	1000	20% Discount to BIS
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	20% Discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount to BIS
14(Transient Over Voltages)	-	1000	20% Discount to BIS
15.0(General)	-	1000	20% Discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount to BIS
15.2(Spillage Test)	-	1000	20% Discount to BIS
15.3(Humidity Test)	-	1000	20% Discount to BIS
16.0(General)	-	500	20% Discount to BIS
16.1(General)	-	500	20% Discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount to BIS
18(Endurance Test requirements and tests)	-	500	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
20(Stability test)	-	1000	20% Discount to BIS
21(Mechanical Strength Test)	-	1000	20% Discount to BIS
22(Construction verification related test)	-	1000	20% Discount to BIS
23(General)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
26(Terminals for external conductors)	-	1000	20% Discount to BIS
27(Provision for earthing)	-	1000	20% Discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount to BIS
30.1(Ball pressure test)	-	1000	20% Discount to BIS
30.2(Glow Wire Test)	-	1000	20% Discount to BIS
30.2(Needle Flame Test)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
32(Radiation Toxicity and Similar Hazards)	-	1000	20% Discount to BIS
4(General requirement)	-	500	20% Discount to BIS
16(Leakage current and electric strength)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
18(Endurance)	-	500	20% Discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount to BIS
11.4(Heating appliances)	-	900	20% Discount to BIS
11.5(Motor-operated appliances)	-	1200	20% Discount to BIS
11.6(Combined appliances)	-	1000	20% Discount to BIS
11.7(Duration corresponding)	-	1000	20% Discount to BIS
11.8(Temperature rise)	-	1000	20% Discount to BIS
4(General Requirement)	-	500	20% Discount to BIS
5(General conditions for tests)	-	500	20% Discount to BIS
6(Classification- IS 302-1)	-	500	20% Discount to BIS
28(Screw test and connections)	-	1000	20% Discount to BIS
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
28(Screw test and connections)	-	0	-

11 Apr, 2028

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMC/EMI) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

6650

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

ELECTRICAL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	100	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
10(POWER INPUT AND CURRENT)	-	100	-
11(HEATING)	-	100	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	100	-
14(TRANSIENT OVERVOLTAGES)	-	100	-
15(MOISTURE RESISTANCE)	-	100	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	100	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	-
18(ENDURANCE)	-	100	-
19(ABNORMAL OPERATION)	-	100	-
20(STABILITY AND MECHANICAL HAZARDS)	-	100	-
21(MECHANICAL STRENGTH)	-	100	-
22(CONSTRUCTION)	-	100	-
23(INTERNAL WIRING)	-	100	-
24(COMPONENTS)	-	100	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	100	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	-
27(PROVISION FOR EARTHING)	-	100	-
28(SCREWS AND CONNECTIONS)	-	100	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	100	-
30(RESISTANCE TO HEAT AND FIRE)	-	100	-
31(RESISTANCE TO RUSTING)	-	100	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(General requirements)	-	100	-
5(General Conditions of tests)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
Marking- IS 302-1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.12.1(Marking- IS 302-1)	-	100	-
7.12.3(Marking- IS 302-1)	-	100	-
7.12.5(Marking- IS 302-1)	-	100	-
7.12.6(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking- IS 302-2-15)	-	100	-
8(Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	100	-
16(Leakage current as per Cl 16, IS 302-1)	-	100	-
16(electric strength as per Cl 16, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	100	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	100	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
10(POWER INPUT AND CURRENT)	-	100	-
11(HEATING)	-	100	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	100	-
14(TRANSIENT OVERVOLTAGES)	-	100	-
15(MOISTURE RESISTANCE)	-	100	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	100	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	-
18(ENDURANCE)	-	100	-
19(ABNORMAL OPERATION)	-	100	-
20(STABILITY AND MECHANICAL HAZARDS)	-	100	-
21(MECHANICAL STRENGTH)	-	100	-
22(CONSTRUCTION)	-	100	-
23(INTERNAL WIRING)	-	100	-
24(COMPONENTS)	-	100	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	100	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	-
27(PROVISION FOR EARTHING)	-	100	-
28(SCREWS AND CONNECTIONS)	-	100	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	100	-
30(RESISTANCE TO HEAT AND FIRE)	-	100	-
31(RESISTANCE TO RUSTING)	-	100	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(General requirements)	-	100	-
5(General Conditions of tests)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
Marking- IS 302-1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.12.1(Marking- IS 302-1)	-	100	-
7.12.3(Marking- IS 302-1)	-	100	-
7.12.5(Marking- IS 302-1)	-	100	-
7.12.6(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking- IS 302-2-15)	-	100	-
8(Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	100	-
16(Leakage current as per Cl 16, IS 302-1)	-	100	-
16(electric strength as per Cl 16, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	100	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-

-
Included w.e.f 03.02.2025 Exclusion: Cl. 19.11.4.1 to 19.11.4.7 (EMI/EMC tests)

6651

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	400	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal Operation, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.3(Mechanical Strength, IS 302-1)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction, IS 302-1)	-	100	-
22.11(Construction, IS 302-1)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction, IS 302-1)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28.1(Screws and connections)	-	100	-
22.2(Construction, IS 302-1)	-	100	-
22.3(Construction, IS 302-1)	-	100	-
B.22.4(Construction, IS 302-1)	-	100	-
B.22.5(Construction, IS 302-1)	-	100	-
12(Charging of metal-ion batteries)	-	2000	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	400	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal Operation, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.3(Mechanical Strength, IS 302-1)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction, IS 302-1)	-	100	-
22.11(Construction, IS 302-1)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction, IS 302-1)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28.1(Screws and connections)	-	100	-
22.2(Construction, IS 302-1)	-	100	-
22.3(Construction, IS 302-1)	-	100	-
B.22.4(Construction, IS 302-1)	-	100	-
B.22.5(Construction, IS 302-1)	-	100	-

23 Jun, 2028

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

6652

Aaditech Test and Calibration Lab LLP

8179926

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

ELECTRICAL

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-

-
Included w.e.f 25.03.2025 Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7(EMI/EMC)

6653

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirements)	-	500	-
Cl-5.2(Redraw rods)	-	500	-
Cl-6(Manufacture)	-	450	-
Cl-7.1, Table-2 (i)(Silicon)	-	400	-
Cl-7.1, Table-2 (ii)(Iron)	-	400	-
Cl-7.1, Table-2 (iii)(Copper)	-	400	-
Cl-7.1, Table-2 (iv)(Manganese)	-	400	-
Cl-7.1, Table-2 (v)(Magnesium)	-	400	-
Cl-7.1, Table-2 (vi)(Chromium)	-	400	-
Cl-7.1, Table-2 (vii)(Zinc)	-	400	-
Cl-7.1, Table-2 (viii)(Boron)	-	400	-
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	400	-
Cl-7.1, Table-2 (x)(Other each)	-	400	-
Cl-7.1, Table-2 (xi)(Others total)	-	400	-
Cl-7.1, Table-2 (xii)(Aluminium)	-	400	-
Cl-8.1, Table-3(UTS (MPa))	-	2000	-
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	1000	-
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	1000	-
Cl-8.1, Table-3(Conductivity (%) (IACS))	-	1000	-
Cl-9(Electrical resistivity)	-	2000	-
Cl-10(Diameter and Permissible Variations)	-	650	-
Cl-11(Joints)	-	400	-
Cl-12(Finish and freedom from defects)	-	400	-
Cl-16(Marking)	-	300	-

31 Dec, 2026

-
Included w.e.f 03.03.2025

6654

BIS, Eastern Regional Laboratory (ERL)

None

IS 15030 (2022)

TEREPHTHALIC ACID - SPECIFICATION (First revision)

4288 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2-Table 1-(i) (Moisture content)	-
3.2-Table 1-(ii) (Colour, Pt-Co)	-
3.2-Table 1-(iii) (Ash content)	-
3.2-Table 1-(iv) (Acid value)	-
3.2-Table 1-(v) (Total of iron, cobalt, manganese, chromium and titanium)	-
3.2-Table 1-(vii) (4-carboxybenzaldehyde)	-
3.2-Table 1-(vi) (Total of sodium, magnesium, potassium, calcium and nickel)	-
3.2-Table 1-(viii) (4-carboxybenzaldehyde + p-toluic acid)	-

-
COMPLETE

6655

BIS, Eastern Regional Laboratory (ERL)

None

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade Rs. 4800/- Testing Charge for Boric Acid- b) Technical (TECH) Grade Rs. 2000/- Testing Charge for Boric Acid- c) Explosive Grade Rs. 2300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.2 ( Description)	-

-
COMPLETE

6656

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Type

18850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	300	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	300	-
Cl-6.1(Manufacture)	-	300	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	300	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	300	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	300	-
Cl-6.5(Manufacture (Scarf joints))	-	300	-
Cl-6.6(Manufacture ( Preservative treatment))	-	300	-
Cl-7.1(Dimensions -length)	-	300	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1500	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1500	-
Cl-10.8(Tensile Strength)	-	1500	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1500	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1500	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-10.11(Retention of Preservative)	-	2500	-
Cl-10.12(Formaldehyde Content Test)	-	2000	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	8500	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	300	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	600	-
Cl-7.2(Thickness)	-	200	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	1000	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	2000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	2000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1600	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1600	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1600	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1600	-
Cl-10.11(Retention of Preservative)	-	2500	-
Cl-10.12(Formaldehyde Content Test)	-	2500	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	2500	-

-
Included w.e.f 20.05.2025

6657

National Test House (WR) - NTH, Mumbai

7107604

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 viii(Alkali content)	-	500	-
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2500	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2500	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2500	-

24 Jul, 2025

-
-

6658

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	VCM Content K - Value
4(Size of fitting)	-	0	Dimension
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	Socket Lengths & Diameter at mid point of Socket Length
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	Socket Lengths & Diameter at mid point of Socket Length
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	Opacity
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	Short term Hydraulic test (27 °C/1hour)
8(Marking)	-	500	marking
3.2.3(socket, measurements)	-	500	-
6.3(Effect on water test)	-	3000	-

31 Dec, 2026

-
-

6659

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	Dimension
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	Included in Dimension
Clause 3.2.2, and Fig. 2.(B)	-	500	Included in Dimension
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Plumbing)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(B)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Nominal size)	-	0	Included in Dimension
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1200	Sulphated ash content
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	3000	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	-
3.1(General)	-	4100	1100+3000

31 Dec, 2026

-
-

6660

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	VST
9.5(Tensile Strength IS 12235(Part 13))	-	1800	Tensile 1300+500
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	1000+500
9.3(Density IS 12235 (Part 14))	-	700	--
9.2(Internal Diameter)	-	500	--
9.1( Visual Appearance)	-	500	--
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1500	1000+500
8.4(Sealing rings - Hardness)	-	500	--
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	--
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	--
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	--
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	--
7.3.2(Rib height)	-	500	--
7.3.1(No.of Ribs)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500	1000+500
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500	--
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1200	--
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1200	700+500
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	--
9.5(Tensile Strength IS 12235(Part 13))	-	1600	Tensile 1100+500
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	1100+300
9.3(Density IS 12235 (Part 14))	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500	500
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
4.1.2(K-Value as per IS-4669)	-	1100	-

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found