BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6661

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

25650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	K – Value
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	Dimension
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	Included in Dimension
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	Included in Dimension
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	Included in Dimension
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	Included in Dimension
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	Included in Dimension
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	Visual appearance
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200	Reversion (700+500)
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	Stress relief test
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	Vicat Softening temp. (VST)
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Effect on sunlight for 1600 hrs*(Manual)
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Resistance to sulphic acid 55°C/14days + Sample Preparation (2000+500)
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1600	Resistance to external blow at 0°C(Impact) + Sample Preparation (1100+500)
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1800	Tensile strength (Before Exposure) + Sample Preparation (1300+500)
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	850	Axial Shrinkage (Type B pipe only) (90˚C/ 1 Hour)
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	Water tightness of joints
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	Resistance to Dichloromethane at Specified temp.
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	Included in Dimension
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200	Reversion 700+500
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Resistance to sulphic acid 55°C/14days + Sample Preparation
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	Resistance to external blow at 0°C(Impact) + Sample Preparation
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350	Tensile strength (Before Exposure) + Sample Preparation
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	Axial Shrinkage (Type B pipe only) (90˚C/ 1 Hour)
8.6(Effect on Water Test)	-	3000	-

31 Dec, 2026

-
-

6662

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MATERIAL-(Conform to IS 10151))	-	3000	Material identification
5.1.3(MATERIAL- (Refer IS 4669))	-	1100	included in 5.1
8.2(Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-	700	Density
8.5(Elongation Test-(Annex C,)- pipes shall not elongate more than 7.5 percent)	-	1300	Elongation test
7.4.2(Perforation Requirement-The maximum in flow area shall be 80 cm2/m length of pipe of all diameters)	-	500	Perforation Requirement
7.4.3(Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-	0	Perforation Requirement
7, Table 1(DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-	500	Dimension and tolerences
7.2, 8(Wall Thickness)	-	500	included in dimension and tolerences
7.3(Length)	-	500	included in dimension and tolerences
8.1.1(Visual Appearance, Workmanship and Finish)	-	500	Visual Appearance, Workmanship & Finish
8.1.2(Visual Appearance, Workmanship and Finish)	-	0	Visual Appearance, Workmanship & Finish
8.3,Table 3(Pipe stiffness-(Refer Annex A))	-	1100	Pipe Stiffness
8.4,Table 3(Impact Strength at 0 degree C- (refer Annex B))	-	1600	Impact strength at O °C 1100+500
8.6(BendIng Test-(Annex D,))	-	1000	Bending test
8.7(Joints)	-	1000	Joint test
7.4.1(Perforation Requirement- There sh.all be maximum 8 rows of perforation)	-	0	Perforation Requirement
6(TYPES- perforated or non-perforated types.)	-	0	-
8.8(The quantities of lead, dialkyl tin C4 and higher homologues (measured as tin), and any other toxic substances extracted from the internal walls of the pipes)	-	3000	--

31 Dec, 2026

-
-

6663

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

148625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	Classification of pipe
6.2.1 Annex B(Chloride Content of Resin)	-	2000	Chloride content of resin
6.3.1 Annex B(Chloride content)	-	4300	Resin Chlorine content
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1100	Heat Deflection Temp. (HDT)
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	Density
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	Dimension of pipe
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	Outside diameter at any point
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	wall thickness
7.1.3 (Effective length)	-	500	Effective lenght
8(Pipe Ends)	-	500	Pipe ends ( Visual)
9.1(Visual Appearance)	-	500	Visual Appearance
9.2 IS 12235 (Part 3)(Opacity)	-	700	Opasity
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	Effect on water
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1200	Reversion 700+500
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	Vicat Softening temp. (VST)
9.6 IS 12235(Part 14)(Density)	-	500	Density
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	Hydrostatic Characteristics Acceptance test (20°C /1 h. ) 850
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	Type test (95°C /165 h. ) 4800
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	Type test (95°C /1000 h. ) 11000
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	109500	Thermal Stability by Hydrostatic Pressure Type Test 950C/ 8760 hr/12.50
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1500	Resistance to External Blow at 0 °C 1000+500
10.4 IS 12235(Part 19)(Flattening Test)	-	1100	Flattening Test
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1800	Tensile Strength 1300+500

31 Dec, 2026

-
-

6664

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	Marking
3(Type of Fitting)	-	500	Type of fitting
4(Size Designation)	-	500	Dimension
5(Colour of fittings)	-	500	Colour of fittings
7.1,Table 1(Wall thickness)	-	500	Included in Dimension
7.2 ,Table 2&3(Socket Dimensions)	-	500	Included in Dimension
7.3(Dimensions of waste trap(Nahani Trap)	-	500	Included in Dimension
8(Sealing Rings)	-	1550	Hardness of Sealing Ring 1050+500
10(Workmanship)	-	500	Workmanship
11(Design requirements)	-	500	Design Requirement (Visual) Access Opening (Optional)
11.1(Solvent cement type or Rubber ring type)	-	500	Included in Design Requirement (Visual)
11.2(Socket and spigot configeration)	-	500	Included in Design Requirement (Visual)
11.4,Table 5(Vent cowl)	-	500	Included in dimension
11.5,Table 6(Pipe Clips)	-	500	Included in Dimension
12.1(Visual appearance)	-	500	Visual Appearance
12.2(Stress relief test)	-	1200	Stress Relief test 700+500
12.3(Vicat softening tempewrature)	-	1100	Vicat Softening Temp. (VST)
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	Resistance to Sulphuric Acid ( 55 °C/14 days) 2000+500
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	Titanium Dioxide Content (TiO2)
Cl.15, Annex B(Sulphated Ash Content)	-	1200	Sulphated Ash Content
16.1(Impact test)	-	1100	Impact test (Drop test)
17(Watet tightness of joint)	-	850	Water Tightness of Joints
12.4(Effect on water test)	-	3000	-
11.3(Access Openings)	-	500	-
Table 4(Dimension of Access Openings)	-	500	-

31 Dec, 2026

-
-

6665

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	Dimension of Pipe & Socket
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	500	Dimension of Pipe & Socket
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	500	Dimension of Pipe & Socket
6.1.3 (Length of Pipe)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	500	Dimension of Pipe & Socket
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	Dimension of Pipe & Socket
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	500	Dimension of Pipe & Socket
6.1.4.1 (e3min=0.75e)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	500	Dimension of Pipe & Socket
7.1(Appearance:- )	-	500	Appearance
7.2(Colour )	-	500	Colour
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	Vicat Softening temp. (VST)
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1200	Longitudinal Reversion 700+500
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1600	Resistance to External Blow at 0 °C 1100+500
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1600	Ring Stiffness 1100+500
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	Acceptance test (1 hr/270C)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	Type test (1000 hrs /600C)
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	500	-
9.2 IS 14182(b) Solvent cement)	-	500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	0	Included in 10.2.1
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	Internal Negative Hydrostatic Pressure test (internal Vacuum) for Elastomeric Sealing ring joints
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	Internal Hydrostatic Pressure test for Elastomeric
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	Included in 10.1.2
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	Titanium Dioxide Content (TiO2
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-

31 Dec, 2026

-
-

6666

DELHI TEST HOUSE, Azadhpur

8131406

IS 5168 (2018)

Glass feeding bottles - Specification (First Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Materials)	-	6000	NA
Cl 5.2(Description)	-	500	NA
Cl 5.3(Capacity)	-	1000	NA
Cl 5.4(Types, Dimensions and Wall Thickness)	-	1000	NA
Cl 5.5(Scale and Graduations)	-	1500	NA
Cl 5.7(Thermal Shock Resistance)	-	2500	NA
Cl 5.5(Scale and Graduations)	-	1500	NA
5.6(Limit of Alkalinity)	-	2000	NA
5.8(Migration of Heavy and toxic Elements)	-	5500	NA
Cl 5.3(Capacity)	-	250	NA
"Clause 5.2.1 Sub Clause.5.2.1.1 &5.2.1.2 "(Manufacture, workmanship, Finish and Appearance)	-	250	NA
Cl 5.7(Thermal Shock Resistance)	-	2000	NA

17 Jun, 2027

-
-

6667

DELHI TEST HOUSE, Azadhpur

8131406

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.3(Carbon Dispersion Test)	-	2500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.3(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.6(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
6.1(Finish)	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.1.1(Resistance to Deformation)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.1.2(Resistance to Deformation)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.2(Resistance to Impact)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.3(Test for Top Load Resistance)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.4(Tensile Strength)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.5(Flexural Modulus)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.6(overall Migration)	-	3000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.4(Wall Thickness above effective height)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.1(Lid Thickness)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.1(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.2(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.2.1(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.3(Test for Top Load Resistance)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
6.1(Finish)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.1(Density)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.6(overall Migration)	-	3000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.2(MFR)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)

17 Jun, 2027

-
-

6668

DELHI TEST HOUSE, Azadhpur

8131406

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.5 Annex J(Product resistance test for printed pouches)	-	500	NA
7.4 Annex H(Ink adhesion test for printed pouches)	-	500	NA
7.3 Annex G(Drop test )	-	500	NA
7.2 Annex F(Stack Load test)	-	500	NA
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	NA
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	500	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	500	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	500	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	500	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	500	NA
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	3500	NA
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	2000	NA
6.1.6(Width)	-	250	NA
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	250	NA
6.1.4(Odour)	-	250	NA
6.1.3(Winding of the Film )	-	250	NA
6.1.2(Film Form)	-	250	NA
6.1.1(Description)	-	250	NA
5(Material)	-	750	NA
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	NA
6.1.7(Migration test)	-	3500	NA
7.2(Water potability)	-	1000	NA
7.3(Stack load test)	-	1000	NA
7.6(Product resistance test)	-	500	NA
7.5(Ink adhesion test)	-	500	NA
Table 3((i) Barium)	-	500	NA
Table 3(ii) Cobalt)	-	500	NA
Table 3(iii) Copper)	-	500	NA
Table 3(iv) Iron)	-	500	NA
Table 3(v) Lithium)	-	500	NA
Table 3(vi) Manganese)	-	500	NA
Table 3(viii) Antimony)	-	500	NA
Table 3(ix) Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	500	NA
6.1.10(Dart Impact Resistance)	-	1000	NA
9(Packing and Marking)	-	250	NA

17 Jun, 2027

-
-

6669

Indian Institute of Packaging (IIP), Delhi

8177901

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

40130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	0	-
5.2.1(Fabric)	-	11900	-
5.2.2(Linear density of tapes)	-	1199.99	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	3499.99	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	0	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	0	-
5.4.1.2(Bottom seam)	-	5100	-
5.4.2(Sack)	-	0	-
5.4.3(Sack)	-	1599.99	-
5.4.5(Liner)	-	4500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	0	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	0	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1600	Breaking Strength: 1100/- and Specimen Preparation Charge: 500/-
6.2, Table 1(Breaking strength of bottom seam)	-	1600	Seam Strength: 1100/- and Specimen Preparation Charge: 500/-
6.2, Table 1(Breaking strength of centre seam)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	12880	CHARGES FOR UV EXPOSURE : 10180/-; Breaking Strength both direction: 2200/- and Specimen Preparation Charge: 500/-
6.3(Average breaking strength - Widthwise after UV exposure)	-	0	-
6.4(Drop Impact Testing of Filled Sacks)	-	1600	Drop Test: 1100; Sample Preparation Charge: 500/-
Clause 6.5 Table 1 viii(Ash content)	-	1199.99	-

-
-

6670

DELHI TEST HOUSE, Azadhpur

8131406

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1250	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	700	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	NA
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	250	NA
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	250	NA
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	250	-
Clause 7.1.3 (Colour and Texture)	-	250	NA
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	250	NA
10(Marking)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	250	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	250	NA
Clause 7.1.1 (General Quality)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	NA

17 Jun, 2027

-
-

6671

DELHI TEST HOUSE, Azadhpur

8131406

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	NA
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2000	NA
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	NA
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	250	NA
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	250	NA
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	NA
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	NA
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	NA
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	NA
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	NA
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	NA
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	NA
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3000	NA
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	NA
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	NA
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	NA
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	NA
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	NA
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	NA
8.6(Effect on Water Test)	-	4500	NA

17 Jun, 2027

-
-

6672

DELHI TEST HOUSE, Azadhpur

8131406

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	1500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 9.3(Load In One Direction)	-	1500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 7.2(Weight)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 5(Deformations and Surface Characteristics)	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Sulphur and phosphorous)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(CE)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Nitrogen%)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Ni)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Mo)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Cr)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Ti)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(V)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Nb)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Aluminium %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Copper %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Sulphur %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Phosphorus %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Manganese %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Carbon %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 9.3, Table 4(Bend Test )	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(TS/YS ratio)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 7.2 Table -2 (Nominal Mass)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
8.18.1 Table 3(Total elongation at maximum force)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 5(Deformations and Surface Characteristics)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
5.7(PullOut (Bond Test))	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.2(Niobium (Nb))	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.2(Boron (B))	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(TS/YS Ratio)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.2(Surface Characteristics)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause 6.3(Effective Cross-sectional Area)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
5.7(Pull-out test - IS:2770(P1))	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM

17 Jun, 2027

-
-

6673

DELHI TEST HOUSE, Azadhpur

8131406

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12 & 13(Length, Width & Thickness)	-	1000	NA
7.1(Carbon %)	-	500	NA
7.1(Manganese %)	-	500	NA
7.1(Phosphorus %)	-	500	NA
7.1(Sulphur %)	-	500	NA
7.1(Silicon %)	-	500	NA
7.1( Copper %)	-	500	NA
7.1( Aluminium %)	-	500	NA
7.1( Nb)	-	500	NA
7.1(V)	-	500	NA
7.1( Ti)	-	500	NA
7.1(Cr)	-	500	NA
7.1(Mo)	-	500	NA
7.1(Ni)	-	500	NA
7.1( Nitrogen%)	-	2000	NA
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	2000	NA
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	NA
Cl. 12, 13(Camber)	-	500	NA
Cl. 12, 13(Thickness)	-	500	NA
Cl. 8, Table 3(Elongation)	-	1000	NA
Cl. 8, Table 3(Yield Stress)	-	1000	NA
Cl 12 & 13(Length, Width & Thickness)	-	1000	NA
Cl 11(Workmanship)	-	250	NA
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1000	NA
8.0 (2)(Yield Strength-IS:1608(P1))	-	1000	NA
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	1000	NA
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	NA

17 Jun, 2027

-
-

6674

DELHI TEST HOUSE, Azadhpur

8131406

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2, Table 3(Low temperature Flexibility)	-	1000	NA
7.2, Table 3(Flexibility at 23°C)	-	1000	NA
7.2, Table 3(Ozone Resistance)	-	2500	NA
7.2, Table 3(Adhesion between Components- Cover and Reinforcement)	-	1500	NA
7.2, Table 3(Adhesion between Components- Reinforcement layers)	-	1500	NA
7.2, Table 3(Adhesion between Components- Lining and Reinforcement)	-	1500	NA
7.2, Table 3(Minimum Bursting Pressure for type 3)	-	1000	NA
7.2, Table 3(Minimum Bursting Pressure for type 2)	-	1000	NA
7.2, Table 3(Minimum Bursting Pressure for type 1)	-	1000	NA
7.2, Table 3(Change in Diameeter at Maximum working Pressure)	-	1000	NA
7.2, Table 3(Change in Length at Maximum working Pressure)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 3)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 2)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 1)	-	1000	NA
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover)	-	2000	NA
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining)	-	2000	NA
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value)	-	3000	NA
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value)	-	3000	NA
7.1, Table 2(Elongation at Break of Cover of all types)	-	3000	NA
7.1, Table 2(Elongation at Break of Lining of all types)	-	1000	NA
7.1, Table 2(Tensile Strength of Cover)	-	1000	NA
7.1, Table 2(Tensile Strength of Lining)	-	1000	NANA
6, Dimensions(Thickness of Cover of Type 3)	-	500	NA
6, Dimensions(Thickness of Cover of Type 2)	-	500	-
6, Dimensions(Thickness of Cover of Type 1)	-	500	-
6, Dimensions(Tolerance on Length)	-	500	NA
6, Dimensions(Concentricity)	-	500	NA
5(Material and Construction)	-	500	NA
Cl 7.2 & Table 3(Low-temperature flexibility)	-	500	NA
Cl 7.2 & Table 3(Flexibility at 23 °C)	-	500	NA
Cl 7.2 & Table 3(Ozone resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Adhesion between components)	-	2000	NA
Cl 7.2 & Table 3(Minimum burst pressure)	-	1000	NA
Cl 7.2 & Table 3(Change in diameter at maximum working pressure)	-	1000	NA
Cl 7.2 & Table 3(Change in length at maximum working pressure)	-	1000	NA
Cl 7.2 & Table 3(Proof pressure)	-	1000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	2000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	2000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	2000	NA
Cl 7.1 & Table 2(Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-	1000	NA
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	1000	NA
Cl 7.1 & Table 2(Minimum elongation at break)	-	500	NA
Cl 7.1 & Table 2(Minimum tensile strength)	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	500	NA
Cl 6.3(Tolerance on length)	-	500	NA
Cl 6.2(Concentricity)	-	500	NA
Cl 6.1 & Table 1(Internal diameters and tolerances)	-	500	NA
Cl 5(Materials and construction)	-	500	NA

17 Jun, 2027

-
-

6675

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

Type-I , II ,III , IV , V

39550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	15000	30% Discount
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	30% Discount
4.2(Tapes – Linear Density )	-	1500	30% Discount
4.2(Construction)	-	1000	30% Discount
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	1500	30% Discount
4.3.1(The number of stitches/dm)	-	1000	30% Discount
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	1000	30% Discount
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	1000	30% Discount
5.1 and Table 1 v(Mass of sack )	-	1500	30% Discount
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	5000	30% Discount
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	2500	30% Discount
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	2500	30% Discount
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	20000	30% Discount
5.2 and Table 1 x(Ash content )	-	1000	30% Discount
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	1500	30% Discount
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v(Mass of sack )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-

31 Dec, 2026

-
Included w.e.f 10.02.2025

6676

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

154000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.8(Temperature rise)	-	15000	-
11.7(Duration corresponding)	-	0	Refer charges for Cl. no. 11.8
11.6(Combined appliances)	-	0	Refer charges for Cl. no. 11.8
11.5(Motor-operated appliances)	-	0	Refer charges for Cl. no. 11.8
11.4(Heating appliances)	-	0	Refer charges for Cl. no. 11.8
8.1.5(Live parts of built-in appliances)	-	5000	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	9000	-
16(Leakage current and electric strength)	-	12000	-
4(General requirement)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	3000	-
30.2(Glow Wire Test)	-	3000	-
30.1(Ball pressure test)	-	3000	-
29(clearance, creepage distances and solid insulation)	-	5000	-
28(Screw test and connections)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	4000	-
24(Components)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	3000	-
22.1(Construction, IS 302-1)	-	12000	-
21.1(Mechanical Strength, IS 302-1)	-	4000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3000	-
19(Abnormal Operation)	-	15000	-
18(Endurance)	-	0	Repeated Clause
17(Over Load Protection of Transformers and associated circuits)	-	0	Repeated Clause
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Refer charges for Cl. no. 16
16.2(Leakage Current (after Clause 15))	-	0	Refer charges for Cl. no. 16
16.1(General)	-	0	Refer charges for Cl. no. 16
16.0(General)	-	0	Refer charges for Cl. no. 16
15.3(Humidity Test)	-	4000	-
15.2(Spillage Test)	-	4000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	4000	-
15.0(Moisture resistance)	-	4000	-
14(Transient Over Voltages)	-	9000	-
13.3(Electric Strength at operating temperature)	-	0	Refer charges for Cl. no. 13
13.2(Leakage current at operating temperature)	-	0	Refer charges for Cl. no. 13
13(Leakage current and electric strength at operating temperature)	-	12000	-
11.3(Heating)	-	0	Refer charges for Cl. no. 11.8
11.2(General)	-	0	Refer charges for Cl. no. 11.8
11.1(General)	-	0	Refer charges for Cl. no. 11.8
10.2(Current input)	-	5000	-
10.1(Power input)	-	5000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	Refer charges for Cl. no. 8.1.5
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Refer charges for Cl. no. 8.1.5
8.1.2(Protection against live parts in openings)	-	0	Refer charges for Cl. no. 8.1.5
8.1.1(Protection against live parts in all positions)	-	0	Refer charges for Cl. no. 8.1.5
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	1000	-
Annex D(Thermal motor protectors)	-	1000	-
15.2(Moisture resistance)	-	0	Refer charges for Cl. no. 15.3
19.17(Abnormal Operation, IS 302-1)	-	0	Refer charges for Cl. no. 19
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Refer charges for Cl. no. 20
21.2(Mechanical Strength, IS 302-1)	-	0	Refer charges for Cl. no. 21
21.3(Mechanical Strength, IS 302-1)	-	0	Refer charges for Cl. no. 21
22.5(Construction)	-	0	Refer charges for Cl. no. 22
22.6(Construction, IS 302-1)	-	0	Refer charges for Cl. no. 22
22.11(Construction, IS 302-1)	-	0	Refer charges for Cl. no. 22
22.42(Construction)	-	0	Refer charges for Cl. no. 22
23.3(Internal Wiring, IS 302-1)	-	0	Refer charges for Cl. no. 23
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	Repeated Clause
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges for Cl. no. 25
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges for Cl. no. 25
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges for Cl. no. 25
26.5(Terminals for external conductors)	-	0	Refer charges for Cl. no. 26
27.5(Provision for Earthing, IS 302-1)	-	0	Refer charges for Cl. no. 27
28.1(Screws and connections)	-	0	Refer charges for Cl. no. 28
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
Annex C(Ageing test on motors)	-	2000	-

27 Oct, 2028

-
Included w.e.f 11.02.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC), Cl 12 (Charging of metal-ion batteries), Cl 32 (Radiation Toxicity and Similar Hazards), Cl 22 (Construction) and Annex B (Construction) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

6677

DELHI TEST HOUSE, Azadhpur

8131406

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	8500	NA
Cl 3.2(Material used for composite bottom)	-	8500	NA
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	8500	NA
Cl 3.4(Material used for stainless steel lid)	-	8500	NA
Cl 3.5(Material used for tempered glass lid)	-	8500	NA
Cl 3.5(Material used for stainless steel rim)	-	8500	NA
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	500	NA
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	500	NA
Cl 4.2(Thickness of the finished utensil)	-	500	NA
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	500	NA
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	500	NA
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	500	NA
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	500	NA
Cl 5.1(Manufacturing defect & visual appearance)	-	500	NA
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	1500	NA
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	1500	NA
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	1500	NA
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	1500	NA
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	2500	NA
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	1500	NA
Cl 6.7(Nominal Capacity Test)	-	250	NA
Cl 8(Marking)	-	250	NA
Cl 4.3(Classification)	-	250	NA
CL 5.2(Accessibility for cleaning)	-	250	NA
Cl 5.3(Joining of handles to the utensils)	-	500	NA
Cl 5.4(Requirement for handles)	-	15000	NA
Cl 5.5(Welding (Finish))	-	250	NA
Cl 5.6(Finish of 3-ply utensil)	-	250	NA
Cl 5.7(Requirement for coating)	-	1500	NA
Cl 5.8(Coating thickness test)	-	1500	NA
Cl 5.8(Coating adhesion test)	-	1500	NA
Cl 5.8.1(Thermal shock test (Coating))	-	1500	NA

17 Jun, 2027

-
Included.w.e.f.14.01.2025

6678

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All Type

15450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	750	-
Cl-4.2(Adhesive)	-	750	-
Cl-5.1(Veneers)	-	750	-
Cl-5.2.1(Glueing)	-	750	-
Cl -5.2.2(Thickness of Veneers)	-	750	-
Cl - 5.2.3.1(Joint in Veneers)	-	750	-
Cl - 5.2.3.2(Edge joints)	-	750	-
Cl - 5.2.3.3(End joints)	-	750	-
Cl - 5.2.3.4(Scarf joints)	-	750	-
Cl - 5.2.4(Grain Direction)	-	750	-
Cl-5.3(Treatment)	-	750	-
Cl-5.4(Moisture Content)	-	750	-
Cl-6.1(Dimensions (length))	-	750	-
Cl-6.2(Thickness)	-	750	-
Cl-6.3(Squareness)	-	750	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	750	-
Cl-9.3(Moisture Content)	-	750	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	750	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	750	-
Cl-9.5.2(Water Resistance Test)	-	750	-
Cl-9.6(Tensile Strength-Along the grain)	-	1200	-
Cl-9.7(Mycological Test -Adhesion)	-	1200	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	750	-
5.1.1(Defects in veneers)	-	750	-
Cl-4.1(Timber)	-	0	-
Cl-4.2(Adhesive)	-	8500	-
Cl-5.1(Veneers)	-	2500	-
Cl-5.2.1(Glueing)	-	0	-
Cl -5.2.2(Thickness of Veneers)	-	500	-
Cl - 5.2.3.1(Joint in Veneers)	-	0	-
Cl - 5.2.3.2(Edge joints)	-	0	-
Cl - 5.2.3.3(End joints)	-	0	-
Cl - 5.2.3.4(Scarf joints)	-	0	-
Cl - 5.2.4(Grain Direction)	-	0	-
Cl-5.3(Treatment)	-	0	-
Cl-5.4(Moisture Content)	-	500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	750	-
Cl-6.3(Squareness)	-	750	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	-
Cl-9.3(Moisture Content)	-	500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	750	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	750	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	800	-
Cl-9.7(Mycological Test -Adhesion)	-	1000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1200	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1200	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1200	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1200	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	2500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	2500	-
Cl-9.4.2(Adhesion of Plies)	-	8500	-
5.1.1(Defects in veneers)	-	2500	-

-
Included w.e.f 20.05.2025

6679

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Rated Voltage Being Not more then 250 V for single - phase appliances and 480 V for Other Appliances Including Direct Current (DC) Supplied appliances and Battery Operated appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	1000	20% Discount TO BIS
5(General conditions for the tests)	-	500	20% Discount TO BIS
11.8(Temperature rise)	-	1000	20% Discount TO BIS
11.7(Duration corresponding)	-	1000	20% Discount TO BIS
11.6(Combined appliances)	-	1000	20% Discount TO BIS
11.5(Motor-operated appliances)	-	1200	20% Discount TO BIS
11.4(Heating appliances)	-	900	20% Discount TO BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount TO BIS
18(Endurance)	-	500	20% Discount TO BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount TO BIS
16(Leakage current and electric strength)	-	1000	20% Discount TO BIS
4(General requirement)	-	500	20% Discount TO BIS
32.1(Radiation Toxicity and Similar Hazards)	-	1000	20% Discount TO BIS
30.2(Needle Flame Test)	-	1000	20% Discount TO BIS
30.2(Glow Wire Test)	-	1000	20% Discount TO BIS
30.1(Ball pressure test)	-	1000	20% Discount TO BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount TO BIS
28(Screw test and connections)	-	1000	20% Discount TO BIS
27.1(Provision for Earthing, IS 302-1)	-	1000	20% Discount TO BIS
26(Terminals for external conductors)	-	1000	20% Discount TO BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount TO BIS
24(Components)	-	1000	20% Discount TO BIS
23.1(Internal Wiring, IS 302-1)	-	1000	20% Discount TO BIS
22.1(Construction, IS 302-1)	-	1000	20% Discount TO BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% Discount TO BIS
19(Abnormal Operation)	-	1000	20% Discount TO BIS
18(Endurance)	-	500	20% Discount TO BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount TO BIS
16.1(General)	-	500	20% Discount TO BIS
16.0(General)	-	500	20% Discount TO BIS
15.3(Humidity Test)	-	1000	20% Discount TO BIS
15.2(Spillage Test)	-	1000	20% Discount TO BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount TO BIS
15.0(Moisture resistance)	-	1000	20% Discount TO BIS
14(Transient Over Voltages)	-	1000	20% Discount TO BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount TO BIS
13.2(Leakage current at operating temperature)	-	1000	20% Discount TO BIS
13(Leakage current and electric strength at operating temperature)	-	1000	20% Discount TO BIS
11.3(Heating)	-	1000	20% Discount TO BIS
11.2(General)	-	500	20% Discount TO BIS
11.1(General)	-	500	20% Discount TO BIS
10.1(Power input)	-	1000	20% Discount TO BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% Discount TO BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount TO BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount TO BIS
7(Marking and instructions)	-	500	20% Discount TO BIS
A.2(Earth continuity test)	-	1000	20% Discount TO BIS
Annex C(Ageing test on motors)	-	1000	20% Discount TO BIS
Annex D(Thermal motor protectors)	-	1000	20% Discount TO BIS
15.2(Moisture resistance)	-	1000	20% Discount TO BIS
19.17(Abnormal Operation, IS 302-1)	-	1000	20% Discount TO BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% Discount TO BIS
22.5(Construction)	-	1000	20% Discount TO BIS
22.6(Construction, IS 302-1)	-	1000	20% Discount TO BIS
22.11(Construction, IS 302-1)	-	1000	20% Discount TO BIS
22.16(Construction)	-	1000	20% Discount TO BIS
22.32(Construction, IS 302-1)	-	1000	20% Discount TO BIS
22.42(Construction)	-	1000	20% Discount TO BIS
23.3(Internal Wiring, IS 302-1)	-	1000	20% Discount TO BIS
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	20% Discount TO BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount TO BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount TO BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount TO BIS
26.5(Terminals for external conductors)	-	1000	20% Discount TO BIS
27.5(Provision for Earthing, IS 302-1)	-	1000	20% Discount TO BIS
28.1(Screws and connections)	-	1000	20% Discount TO BIS
22.2(Construction, IS 302-1)	-	1000	20% Discount TO BIS
22.3(Construction, IS 302-1)	-	1000	20% Discount TO BIS
B.22.4(Construction, IS 302-1)	-	1000	20% Discount TO BIS
B.22.5(Construction, IS 302-1)	-	1000	20% Discount TO BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount TO BIS
10.2(Current input)	-	1000	20% Discount TO BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount TO BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount TO BIS
31(Resistance to Rusting)	-	1000	20% Discount TO BIS
21.1(Mechanical Strength, IS 302-1)	-	1000	20% Discount TO BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount TO BIS
21.2(Mechanical Strength, IS 302-1)	-	1000	20% Discount TO BIS
21.3(Mechanical Strength, IS 302-1)	-	1000	20% Discount TO BIS
6(Classification- IS 302-1)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	0	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
30.2(Needle Flame Test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.1(Ball pressure test)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
28(Screw test and connections)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
26(Terminals for external conductors)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
19(Abnormal Operation)	-	0	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.0(Moisture resistance)	-	0	-
14(Transient Over Voltages)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.1(Power input)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
7(Marking and instructions)	-	0	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	0	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction, IS 302-1)	-	0	-
22.11(Construction, IS 302-1)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction, IS 302-1)	-	0	-
22.42(Construction)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28.1(Screws and connections)	-	0	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
10.2(Current input)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
31(Resistance to Rusting)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
21.3(Mechanical Strength, IS 302-1)	-	0	-

11 Apr, 2028

-
Included w.e.f 23.01.2025 Excluded : Cl 19.11.4.1 - Cl 19.11.4.7, Cl 12 (Charging of metal-ion batteries) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

6680

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Type

10450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	300	-
Cl-5.2, Table- 1 (i)(Blister)	-	300	-
Cl-5.2, Table- 1 (ii)(Checks)	-	300	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	300	-
Cl-5.2, Table- 1 (iv)(Dote)	-	300	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	300	-
Cl-5.2, Table- 1 (vi)(Joints)	-	300	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	300	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	300	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	300	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	300	-
Cl-5.2, Table- 1 (xi)(Patches)	-	300	-
Cl-5.2, Table- 1 (xii)(Splits)	-	300	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	300	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	300	-
Cl-6.1(Timber)	-	300	-
Cl-6.2(Adhesive)	-	300	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	300	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	300	-
Cl-7.2.5.2(Splits)	-	300	-
Cl-7.2.5.3(Overlap)	-	300	-
Cl-8.1(Dimensions -length)	-	700	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	700	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-9(WORKMANSHIP AND FINISH)	-	300	-
Cl-7.2.4(Scarf Joints)	-	300	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	8500	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	600	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	750	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-7.2.4(Scarf Joints)	-	0	-

-
Included w.e.f 20.05.2025

6681

MSME TESTING CENTER, AHMEDABAD

7186204

IS 6956 (2001)

Cover paper - Specification (First Revision)

15175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.3(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.4(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.3(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.4(Product Specific Requirements)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)-Further a mean of 10 test results shall not vary from nominal grarnmage by more than ±4 percent.)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.3(Grarnmage-As per 6 of IS 1060 (Part 1)- no single test result shall vary by more than *6 percent from nominal)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (One minute Cobb test (Test method Column 4 and 5 of table1))	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Smoothness (Bendtsen)-(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Burst Index-(Test method Column 4 and 5 of table1))	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Ph(Test method Column 4 and 5 of table1))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-MD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Folding endurance-CD-(Test method Column 4 and 5 of table1))	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-CD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Tensile Index-MD(Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Brightness(For white paper only) -(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Opacity, (Test method Column 4 and 5 of table1))	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-CD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Bending stiffness index,-MD-(Test method Column 4 and 5 of table1))	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.1(REQUIREMENTS-General)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.2,Table1 (Wax pick-(Test method Column 4 and 5 of table1))	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.1(Description)	-	600	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.3(Grammage)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(i)(pH)	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iia)(Tensile Index,MD)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iib)(Tensile Index,CD)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iii)(One minute cobb test)	-	1000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(iv)(Opacity)	-	2000	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(v)(Brightness)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(vi)(Burst Index)	-	1400	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(vii)(Wax pick)	-	1150	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(viii)(Smoothness(Bendtsen))	-	900	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(ixa)(Folding endurance,CD)	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(ixb)(Folding endurance,MD)	-	675	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(xa)(Bending stiffness index,CD)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
Cl.4.2, Table-1(xb)(Bending stiffness index,MD)	-	775	Above are general charges .Concession of 25% and 10 % to Micro & Small Enterprises respectively
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	visual test
4.4.1.1(Additional Requirements for ECO-Mark)	-	900	visual test
4.4.4(Product Specific Requirements)	-	900	visual test

16 Jun, 2028

-
-

6682

MSME TESTING CENTER, AHMEDABAD

7186204

IS 12766 (2023)

COMPUTER PAPER - SPECIFICATION

20225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Continuous Length)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1(Paper Description)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1.1(Grammage (Substance))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.1.2(Printing)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.2(Z-fold)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.3(Perforation)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Feed hole diameter(As per Annex A)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.4(Feed hole to feed hole disance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Clause 4.4(Distance of Feed hole centre from the edge of the paper)	-	900	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.5(Size)	-	575	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (i)(As per IS 1060 (Part 5/Sec 3))	-	525	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ii)(Tensile index, CD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ii)(Tensile index, MD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iii)(Tear index, MD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iii)(Tear index, CD)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (iv)(Burst Index)	-	1400	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
One minute Cobb test(As per IS 1060 (Part 5/Sec 4))	-	1000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Brightness ISO(Brightness ISO)	-	775	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (vii)(Opacity)	-	2000	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (viii)(Moisture)	-	700	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (ix)(Ash)	-	1150	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.
Clause 4.7, Table 1, s.no. (x)(Smoothness (Bendtsen) for both sides)	-	900	The general charges apply as stated above. However, Micro Enterprises receive a 25% concession on these charges, while small enterprises are eligible for a 10% concession.

16 Jun, 2028

-
-

6683

MSME TESTING CENTER, AHMEDABAD

7186204

IS 1397 (2020)

Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

20725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grade)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges
Cl 5.2(Finish)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.3(Size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.4(Substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. i)(Moisture content,)	-	700	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.i i)(pH, Min)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. iii)(Burst index )	-	1400	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. iv)(Tear index (each direction))	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. v)(Tensile index CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. v)(Tensile index MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No. vi)(Folding endurance, CD)	-	675	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.vii)(Cobb value Front,, 60 sec 27°C)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.5 Table 1 S.No.vii)(Cobb value Back,, 60 sec 27°C)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.i)(pH)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.ii)(Ash)	-	1000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.iii)(Elongation at break, CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.iii)(Elongation at break, MD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
Cl 5.6 Table 2 S.No.ii)(Elongation at break, CD)	-	2000	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.1 (Requirements- Materials (Grade 1))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.2(Requirements- Materials (Grade 2))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5, 5.1, 5.1.3(Requirements- Materials (Grade 3))	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.1(Finish (Grade 1) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.2(Finish (Grade 2) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.2, 5.2.3(Finish (Grade 3) )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.3(Size)	-	575	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.4(Substance)	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.5(Requirements )	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
5.6(Optional Requirements )	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6, 6.3, 6.3.1(Marking- Each package and roll shall be marked with the following information)	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6, 6.3, 6.3.2(Marking- Each package and roll shall be marked with the following information)	-	600	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
6.4(BIS Certification Marking )	-	900	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.
8(Tests)	-	20725	Above is general charges. For micro enterprises and small enterprises concession of 25% and 10% respectively to above charges.

16 Jun, 2028

-
-

6684

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All Grade, Size. Both Single and Double Layer

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	12500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	12500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	12500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	12500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	12500	-
Clause 7.1.3 (Colour and Texture)	-	12500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	12500	-
Clause 7.1.1 (General Quality)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	12500	-
Clause 3.20(Spacer nibs)	-	12500	-
10(Marking)	-	12500	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	12500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	12500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	12500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	12500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	12500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	12500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	12500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	12500	-
Clause 7.1.3 (Colour and Texture)	-	12500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	12500	-
Clause 7.1.1 (General Quality)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	12500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	12500	-
Clause 3.20(Spacer nibs)	-	12500	-
10(Marking)	-	12500	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

26 Aug, 2027

-
Included.w.e.f.13.02.2025

6685

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	500	-
4.1.1 b) (Material : Seperator tape )	-	500	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	500	-
4.1.1 e) (Shape of conductor )	-	500	-
4.1.1 f) (Nominal size of conductor )	-	500	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	500	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	500	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	1000	-
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	1000	-
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	2000	-
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	2000	-
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	2000	-
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	2000	-
4.3(Fillers)	-	1000	-
4.4(Binder Tape)	-	1000	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	1000	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	1000	-
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	1000	-
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1000	-
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1000	-
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000	-
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	1000	-
4.5.6, 13.4(Colour of Sheath)	-	1000	-
5.1(High Voltage Test (at Room Temperature))	-	1000	-
5.2(Spark Test (Routine Test))	-	1000	-
5.3(Flammability Test- IS 10810 (Part 53).)	-	3000	-
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	3000	-
5.5(Temperature Index-IS 10810 (Part 64).)	-	3000	-
5.6(Smoke Density-IS 10810 (Part 63).)	-	5000	-
5.7(Assessment of Halogen- Table 1 of Annex D)	-	5000	-
5.1(Persulphate Test- IS 10810 (Part 4).)	-	4000	-
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	4000	-
5.12(Hot Set Test- IS 10810 (Part 30).)	-	4000	-
5.12(Permanent Set - IS 10810 (Part 30).)	-	4000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	4000	-
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	4000	-
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	4000	-
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	4000	-
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	4000	-
6.1, Table 1(CORE IDENTIFICATION)	-	4000	-
6.2(Core Identification by Numbers)	-	500	-
6.2.1(Preferred Arrangement of Marking)	-	5000	-
6.2.2(Durability)	-	500	-
7.0(CABLE CODE)	-	500	-
9.0( IDENTIFICATION)	-	500	-
10.1(Packing )	-	500	-
10.2(marking)	-	500	-
10.2.1(Standards marking)	-	500	-
13.3, 14.3(assembly of cores )	-	500	-
6.1(General Requirements)	-	500	-
6.1.1(Colour Combination Green Yellow)	-	500	-
12.1(Conductor)	-	500	-
12.2, Table 4(insulation)	-	500	-
Table 4(Copper Purity test)	-	5000	-
4.3.1 (e)(Fluorine content test (Fillers))	-	5000	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	5000	-
4.3.1 (c)(Conductivity test (Fillers))	-	5000	-
4.3.1 (b)(pH test (Fillers))	-	5000	-
4.3.1 (a)(HCl test (Fillers))	-	5000	-
5.7 (a)(HCl test (Assessment of halogen test))	-	5000	-
5.7 (b)(pH test (Assessment of halogen test))	-	5000	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	5000	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	5000	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	5000	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	500	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	500	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	500	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	5000	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	500	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	1000	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	800	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	800	-
Table 2, III a (i)(Conductor Resistance)	-	800	-
Annex A(Hot Deformation)	-	600	-
6.1, Table 1(CORE IDENTIFICATION)	-	0	-
6.1(General Requirements)	-	0	-
6.1.1(Colour Combination Green Yellow)	-	0	-
12.1(Conductor)	-	0	-
12.2, Table 4(insulation)	-	0	-
Table 4(Copper Purity test)	-	0	-
4.3.1 (e)(Fluorine content test (Fillers))	-	0	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	0	-
4.3.1 (c)(Conductivity test (Fillers))	-	0	-
4.3.1 (b)(pH test (Fillers))	-	0	-
4.3.1 (a)(HCl test (Fillers))	-	0	-
5.7 (a)(HCl test (Assessment of halogen test))	-	0	-
5.7 (b)(pH test (Assessment of halogen test))	-	0	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	0	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	0	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	0	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	0	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	0	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	0	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	0	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	0	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	0	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	0	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	0	-
Table 2, III a (i)(Conductor Resistance)	-	0	-
Annex A(Hot Deformation)	-	0	-
6.1, Table 1(CORE IDENTIFICATION)	-	-	-
6.1(General Requirements)	-	-	-
6.1.1(Colour Combination Green Yellow)	-	-	-
12.1(Conductor)	-	-	-
12.2, Table 4(insulation)	-	-	-
Table 4(Copper Purity test)	-	-	-
4.3.1 (e)(Fluorine content test (Fillers))	-	-	-
4.3.1 (d)(Presence of fluorine test (Fillers))	-	-	-
4.3.1 (c)(Conductivity test (Fillers))	-	-	-
4.3.1 (b)(pH test (Fillers))	-	-	-
4.3.1 (a)(HCl test (Fillers))	-	-	-
5.7 (a)(HCl test (Assessment of halogen test))	-	-	-
5.7 (b)(pH test (Assessment of halogen test))	-	-	-
5.7 (c)(Conductivity test (Assessment of halogen test))	-	-	-
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	-	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	-	-
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	-	-
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	-	-
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	-	-
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	-	-
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	-	-
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	-	-
Cl.4.2.1 & Annex A(Insulation Resistance Constant at Rated Temperature (70°C))	-	-	-
Table 2, III a (i)(Conductor Resistance)	-	-	-
Annex A(Hot Deformation)	-	-	-

15 Aug, 2028

-
Included w.e.f 12.03.2025

6686

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1660 (2024)

Wrought and Cast Aluminium Utensils Specification ( Second Revision )

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	500	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	500	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	500	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	500	-
Cl-4.1(Main body of utensil)	-	1000	-
Cl-4.1(Cast cookware)	-	1000	-
Cl-4.1(Other aluminum components and parts)	-	1000	-
Cl-4.1.1(Lids (material))	-	1000	-
Cl-4.1.1(Minimum thickness of lid)	-	500	-
Cl-4.1.2(Minimum thickness of glass)	-	500	-
Cl-4.1.2(Material of rim)	-	500	-
Cl-4.1.2(Minimum thickness of rim)	-	500	-
Cl-4.2(Material of strips)	-	1000	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	1000	-
Cl-4.3(Clips of lunch box)	-	1000	-
Cl-4.3(Clips of lunch box)	-	1000	-
Cl-4.3(Rivets used in lunch box)	-	1000	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	1000	-
Cl-4.5(Rivets for fixing of handles)	-	500	-
Cl-4.5(Material of cap)	-	500	-
Cl-4.6(Strips used for flame guards)	-	2500	-
Cl-4.6(stainless steel)	-	2500	-
Cl-5(Fabrication)	-	2000	-
Cl-6(Shape and Dimensions)	-	1000	-
Cl-7.1(Handles, when fitted)	-	1000	-
Cl-7.2(Handles)	-	1000	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	500	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	1000	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	500	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	1000	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	1000	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	2500	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	2500	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	2500	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	2500	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	2500	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	2500	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	250	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	1000	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	1000	-
Cl-8(Workmanship and Finish)	-	250	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	500	-
Cl-8.3(Minimum nominal thickness)	-	500	-
Cl-8.3(Thickness of hard anodized)	-	250	-
Cl-8.3(Finish and appearance of hard anodized)	-	250	-
Cl-8.3(Abrasion resistance of hard anodized)	-	1000	-
Cl-8.3(Colour of hard anodized)	-	500	-
Cl-8.3(Hardness of hard anodized)	-	500	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	500	-
Cl-8.5(Non-stick unreinforced PTFE)	-	500	-
Cl-8.6(Ceramic coating)	-	500	-
Cl-8.7(The thickness test, adhesion test)	-	1000	-
Cl-8.7(Minimum thickness of coating)	-	1000	-
Cl-8.7.1(Dry heat the cookware)	-	1000	-
Cl-8.8(Requirements of PTFE)	-	1000	-
Cl-8.9(Material for induction plate)	-	500	-
Cl-8.9(Test for Induction compatible base)	-	1000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	1000	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	1000	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	1000	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	500	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	500	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	500	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	500	-
Cl-9.1(Normal Capacity)	-	500	-
Cl-9.2(Normal Capacity of internal diameter)	-	500	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	0	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	-
Cl-4.1(Main body of utensil)	-	0	-
Cl-4.1(Cast cookware)	-	0	-
Cl-4.1(Other aluminum components and parts)	-	0	-
Cl-4.1.1(Lids (material))	-	0	-
Cl-4.1.1(Minimum thickness of lid)	-	0	-
Cl-4.1.2(Minimum thickness of glass)	-	0	-
Cl-4.1.2(Material of rim)	-	0	-
Cl-4.1.2(Minimum thickness of rim)	-	0	-
Cl-4.2(Material of strips)	-	0	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Rivets used in lunch box)	-	0	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	-
Cl-4.5(Rivets for fixing of handles)	-	0	-
Cl-4.5(Material of cap)	-	0	-
Cl-4.6(Strips used for flame guards)	-	0	-
Cl-4.6(stainless steel)	-	0	-
Cl-5(Fabrication)	-	0	-
Cl-6(Shape and Dimensions)	-	0	-
Cl-7.1(Handles, when fitted)	-	0	-
Cl-7.2(Handles)	-	0	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	0	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	0	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	0	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	0	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	-
Cl-8(Workmanship and Finish)	-	0	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	0	-
Cl-8.3(Minimum nominal thickness)	-	0	-
Cl-8.3(Thickness of hard anodized)	-	0	-
Cl-8.3(Finish and appearance of hard anodized)	-	0	-
Cl-8.3(Abrasion resistance of hard anodized)	-	0	-
Cl-8.3(Colour of hard anodized)	-	0	-
Cl-8.3(Hardness of hard anodized)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	-
Cl-8.5(Non-stick unreinforced PTFE)	-	0	-
Cl-8.6(Ceramic coating)	-	0	-
Cl-8.7(The thickness test, adhesion test)	-	0	-
Cl-8.7(Minimum thickness of coating)	-	0	-
Cl-8.7.1(Dry heat the cookware)	-	0	-
Cl-8.8(Requirements of PTFE)	-	0	-
Cl-8.9(Material for induction plate)	-	0	-
Cl-8.9(Test for Induction compatible base)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	0	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	-
Cl-9.1(Normal Capacity)	-	0	-
Cl-9.2(Normal Capacity of internal diameter)	-	0	-
Cl-3.1.1, 3.1.2(Minimum Thickness of Sheet)	-	0	-
Cl-3.1.3, Table-2(Minimum Thickness at the Bottom)	-	0	-
Cl-3.1.3, Table-2(Minimium Thickness of Wall at the Top Edge)	-	0	-
Cl-3.1.3, Table-2(Minimum Cover Thickness)	-	0	-
Cl-4.1(Main body of utensil)	-	0	-
Cl-4.1(Cast cookware)	-	0	-
Cl-4.1(Other aluminum components and parts)	-	0	-
Cl-4.1.1(Lids (material))	-	0	-
Cl-4.1.1(Minimum thickness of lid)	-	0	-
Cl-4.1.2(Minimum thickness of glass)	-	0	-
Cl-4.1.2(Material of rim)	-	0	-
Cl-4.1.2(Minimum thickness of rim)	-	0	-
Cl-4.2(Material of strips)	-	0	-
Cl-4.2(Stainless steel handles, rivets and fittings)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Clips of lunch box)	-	0	-
Cl-4.3(Rivets used in lunch box)	-	0	-
Cl-4.4(Screws, studs/nuts, and locking loop)	-	0	-
Cl-4.5(Rivets for fixing of handles)	-	0	-
Cl-4.5(Material of cap)	-	0	-
Cl-4.6(Strips used for flame guards)	-	0	-
Cl-4.6(stainless steel)	-	0	-
Cl-5(Fabrication)	-	0	-
Cl-6(Shape and Dimensions)	-	0	-
Cl-7.1(Handles, when fitted)	-	0	-
Cl-7.2(Handles)	-	0	-
Cl-7.3 (Cl- 4.1 of IS 13395)(Construction)	-	0	-
Cl-7.3 (Cl- 4.2 of IS 13395)(Materials)	-	0	-
Cl-7.3 (Cl- 4.3 of IS 13395)(Selection and Size)	-	0	-
Cl-7.3 (Cl- 4.4 of IS 13395)(Position of Handle and Knob with Respect to Cookware)	-	0	-
Cl-7.3 (Cl- 4.5 of IS 13395)(Attachment to Cookware)	-	0	-
Cl-7.3 (Cl- 5.2 of IS 13395)(Bending Strength)	-	0	-
Cl-7.3 (Cl- 5.3 of IS 13395)(Torque Strength)	-	0	-
Cl-7.3 (Cl- 5.4 of IS 13395)(Impact Strength)	-	0	-
Cl-7.3 (Cl- 5.5 of IS 13395)(Fatigue Resistance)	-	0	-
Cl-7.3 (Cl- 5.6 of IS 13395)(Leakage)	-	0	-
Cl-7.3 (Cl- 5.7 of IS 13395)(Thermal Insulation)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Heat Resistance)	-	0	-
Cl-7.3 (Cl- 5.9 of IS 13395)(Washing Resistance (Type Test))	-	0	-
Cl-7.3 (Cl- 5.10 of IS 13395)(Burning Resistance)	-	0	-
Cl-8(Workmanship and Finish)	-	0	-
Cl-8.3(Utensils, if anodized, fully or partially)	-	0	-
Cl-8.3(Minimum nominal thickness)	-	0	-
Cl-8.3(Thickness of hard anodized)	-	0	-
Cl-8.3(Finish and appearance of hard anodized)	-	0	-
Cl-8.3(Abrasion resistance of hard anodized)	-	0	-
Cl-8.3(Colour of hard anodized)	-	0	-
Cl-8.3(Hardness of hard anodized)	-	0	-
Wrought and Cast Aluminium Utensils — Specification(Lid of the cookware)	-	0	-
Cl-8.5(Non-stick unreinforced PTFE)	-	0	-
Cl-8.6(Ceramic coating)	-	0	-
Cl-8.7(The thickness test, adhesion test)	-	0	-
Cl-8.7(Minimum thickness of coating)	-	0	-
Cl-8.7.1(Dry heat the cookware)	-	0	-
Cl-8.8(Requirements of PTFE)	-	0	-
Cl-8.9(Material for induction plate)	-	0	-
Cl-8.9(Test for Induction compatible base)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.1(Tests for Lunch Boxes- Performance Test)	-	0	-
Cl-8.10.2(Tests for Lunch Boxes- Ground Nut Oil Test for Leakage)	-	0	-
Cl-8.11.1(Test(s) on Tempered Glass Lid- Fragmentation Test)	-	0	-
Cl-8.11.2(Test(s) on Tempered Glass Lid-Ball Drop Test)	-	0	-
Cl-8.11.3(Test(s) on Tempered Glass Lid- Thermal Shock Test)	-	0	-
Cl-8.11.4(Test(s) on Tempered Glass Lid- Free Fall Test)	-	0	-
Cl-9.1(Normal Capacity)	-	0	-
Cl-9.2(Normal Capacity of internal diameter)	-	0	-

15 Aug, 2028

-
Included w.e.f 11.02.2025

6687

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (HDPE Mono filament)	-
4.1 (HDPE Mono filament)	-
4.2 (Fabric)	-
4.3 (Colour)	-
5.0 (Types)	-
6.1 (Dimensions and mass)	-
6.2 Table 1 (Mass g/m2,Min)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-
6.2 Table 1 (Warpway Weftway)	-
6.2 Table 1 (Retention of breaking strength after UV exposure, N, Min)	-
6.2 Table 1 (Shading %)	-

-
Except raw material test, Colour fastness of artificial light and Bursting pressure test

6688

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimensions and Mass - IS 1954)	-
6.2 Table 1 (Mass - IS 1964)	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-
6.2 Table 1 (Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-
4.3, 4 (Colour)	-
4.1, 4 ( HDPE Tapes Linear density )	-
4.1, 4 (HDPE Tapes Width )	-
4.1, 4 (HDPE Tapes UV stabilizer)	-
4.1, 4 (HDPE Tapes Material Identification )	-
6.2 Table 1 (Shading Percentage)	-

-
Except raw material test, Colour fastness of artificial light and Bursting pressure test

6689

The Automotive Research Association of India (ARAI), Kothrud, Pune

7106935

IS 2553 : Part 2 (2019)

Safety glass - Specification: Part 2 for road transport (First Revision)

209521 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Light Transmittance)	-	5700	-
5.1.1(Light Transmittance)	-	5700	-
5.1.2.1(Resistance to Abrasion)	-	7888	-
5.1.2.2(Resistance to Abrasion)	-	7888	-
5.1.2.3.1(Resistance to Abrasion)	-	7888	-
5.1.2.3.2(Resistance to Abrasion)	-	7888	-
5.1.2.3.2(Resistance to Abrasion)	-	7888	-
5.3.1 (Resistance to Radiation)	-	26840	-
5.3.2(Resistance to High Temperature)	-	6571	-
5.3.3.1(Resistance to Humidity)	-	80172	-
5.3.3.2(Resistance to Humidity)	-	80172	-
5.3.3.2(Resistance to Humidity)	-	80172	-
5.3.3.3(Resistance to Humidity)	-	80172	-
5.4.1(Optical Distortion)	-	6622	-
5.4.1.3 (Optical Distortion)	-	6622	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone A)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category M1 and N -Zone B)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Primary area)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category L -Zone Secondary area)	-	6160	-
5.4.2(Secondary image separation test-Vehicle Category M2 , M3 and N -central area)	-	6160	-
5.4.2.3(Secondary image separation test)	-	6160	-
5.4.3.1(Head-form Test (Location of crack))	-	12142	-
5.4.3.2(Head-form Test (Interlayer adhesion))	-	12142	-
5.4.3.3.1(Head-form Test)	-	12142	-
5.4.3.3.2(Head-form Test)	-	12142	-
5.4.4(2.260 g Ball)	-	8650	-
5.4.5.1(227 g Ball)	-	13049	-
5.4.5.2(227 g Ball)	-	13049	-
5.4.5.3(227 g Ball)	-	13049	-
5.4.5.4(227 g Ball)	-	13049	-
5.5.1.1.1(Fragmentation Test)	-	12897	-
5.5.1.1.4(Fragmentation Test)	-	12897	-
5.5.1.1.5(Fragmentation Test)	-	12897	-
5.5.1.1.5.1(Fragmentation Test)	-	12897	-
5.5.1.1.5.2(Fragmentation Test)	-	12897	-
5.5.1.2(227 g ball test)	-	5851	-
5.5.2.1.1(227 g ball test)	-	7122	-
5.5.2.1.2(227 g ball test)	-	7122	-
5.5.2.1.3(227 g ball test)	-	7122	-
5.5.3.1(equirements Applicable only to Double-Glazed Units-Individual components)	-	5700	-
5.5.3.2.1( Head-form Test)	-	13813	-
5.5.3.2.2.1( Head-form Test)	-	13813	-
5.5.3.2.2.2( Head-form Test)	-	13813	-
5.5.3.2.2.3( Head-form Test)	-	13813	-
5.5.3.2.3-a( Head-form Test)	-	13813	-
5.5.3.2.3-b-1( Head-form Test)	-	13813	-
5.5.3.2.3-b-2( Head-form Test)	-	13813	-
5.5.3.2.3-b-3( Head-form Test)	-	13813	-

11 Jan, 2028

-
-

6690

The Automotive Research Association of India (ARAI), Kothrud, Pune

7106935

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

71250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Dimension Test Charge. Charges are inclusive of all parameters of dimension test requirements
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
6.6.2,Anx-K(Technical specification-Declaration)	-	0	-
5(Marking)	-	6360	Charges are included in dimension test charge
4.1(Tyre dimension- Section Width)	-	6360	Charges are included in dimension test charge
4.1(Tyre dimension- Outer diameter)	-	6360	Charges are included in dimension test charge
4.6(Tread wear Indicator)	-	6360	Charges are included in dimension test charge
4.4(Tyre strength (Plunger test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
4.5(Endurance test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
4.2(Load & Speed test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
5(Marking)	-	6360	Charges are included in dimension test charge
4.1(Tyre Dimensions)	-	6360	Charges are included in dimension test charge
4.2(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
4.4(Tyre Strength Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
4.5(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
4.6(Tread wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	6360	Charges are included in dimension test charge
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19200	Charges are inclusive of all parameters of Load/Speed Performance Test requirements
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10320	Charges are inclusive of all parameters of Tyre Strength Test (Plunger Test) requirements
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	78000	Charges are inclusive of all parameters of Endurance Test requirements
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	6360	Charges are included in dimension test charge
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	6360	Charges are included in dimension test charge
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	6360	Charges are included in dimension test charge

11 Jan, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number