BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14137 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6751

Sleen India Biz venture Private Limited, Agra

9139736

IS 3818 (1992)

Continuous (Piano) hinges -Specification

Type I,Type II,Type III,Type IV

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 (Ref. Cl.9 of IS 1868:1996)(Anodic casting thickness (Cl. 9.2 of IS 1868:1996))	-	1000	-
4-Fig 1(DIMENSIONS AND TOLERANCES-Nominal Size)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-B)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-C)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-D)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-T)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES- Other Dimensions)	-	200	-
4-Fig 2(DIMENSIONS AND TOLERANCES-CoNTINUOUS ( PIANO) HINGIS TYPB III; 50 min NOMINAL SID)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B1)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B2)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-C)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-D)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-T)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	200	-
5.1(MANUFACTURE)	-	100	-
5.2(MANUFACTURE-Knuekles)	-	100	-
5.2(MANUFACTURE-Knuekles)	-	100	-
5.3(MANUFACTURE-Pins)	-	100	-
5.3(MANUFACTURE-Pins)	-	100	-
5.3(MANUFACTURE-Pin-Anodized thickness)	-	1000	-
5.3(MANUFACTURE-Pins)	-	100	-
5.4(MANUFACTURE-Screw Holes)	-	100	-
6(Finish)	-	1000	-
Cl. 6 (Ref. Cl.9 of IS 1868:1996)(Anodic casting thickness (Cl. 9.2 of IS 1868:1996))	-	1000	-
4-Fig 1(DIMENSIONS AND TOLERANCES-Nominal Size)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-B)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-C)	-	100	-
4-Fig 1(DIMENSIONS AND TOLERANCES-D)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-T)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-	200	-
4-Fig 1(DIMENSIONS AND TOLERANCES- Other Dimensions)	-	200	-
4-Fig 2(DIMENSIONS AND TOLERANCES-CoNTINUOUS ( PIANO) HINGIS TYPB III; 50 min NOMINAL SID)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B1)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-B2)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-C)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-D)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-T)	-	200	-
4-Fig 3(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	200	-
5.1(MANUFACTURE)	-	100	-
5.2(MANUFACTURE-Knuekles)	-	100	-
5.2(MANUFACTURE-Knuekles)	-	100	-
5.3(MANUFACTURE-Pins)	-	100	-
5.3(MANUFACTURE-Pins)	-	100	-
5.3(MANUFACTURE-Pin-Anodized thickness)	-	1000	-
5.3(MANUFACTURE-Pins)	-	100	-
5.4(MANUFACTURE-Screw Holes)	-	100	-
6(Finish)	-	1000	-
Cl. 6 (Ref. Cl.9 of IS 1868:1996)(Anodic casting thickness (Cl. 9.2 of IS 1868:1996))	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-Nominal Size)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-B)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-C)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-D)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-T)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES- Other Dimensions)	-	0	Repeated Clause.
4-Fig 2(DIMENSIONS AND TOLERANCES-CoNTINUOUS ( PIANO) HINGIS TYPB III; 50 min NOMINAL SID)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B1)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B2)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-C)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-D)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-T)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	0	Repeated Clause.
5.1(MANUFACTURE)	-	0	Repeated Clause.
5.2(MANUFACTURE-Knuekles)	-	0	Repeated Clause.
5.2(MANUFACTURE-Knuekles)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pin-Anodized thickness)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.4(MANUFACTURE-Screw Holes)	-	0	Repeated Clause.
6(Finish)	-	0	Repeated Clause.
Cl. 6 (Ref. Cl.9 of IS 1868:1996)(Anodic casting thickness (Cl. 9.2 of IS 1868:1996))	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-Nominal Size)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-B)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-C)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-D)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-T)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-	0	Repeated Clause.
4-Fig 1(DIMENSIONS AND TOLERANCES- Other Dimensions)	-	0	Repeated Clause.
4-Fig 2(DIMENSIONS AND TOLERANCES-CoNTINUOUS ( PIANO) HINGIS TYPB III; 50 min NOMINAL SID)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B1)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-B2)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-C)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-D)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-T)	-	0	Repeated Clause.
4-Fig 3(DIMENSIONS AND TOLERANCES-CSK Screw No.)	-	0	Repeated Clause.
5.1(MANUFACTURE)	-	0	Repeated Clause.
5.2(MANUFACTURE-Knuekles)	-	0	Repeated Clause.
5.2(MANUFACTURE-Knuekles)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pin-Anodized thickness)	-	0	Repeated Clause.
5.3(MANUFACTURE-Pins)	-	0	Repeated Clause.
5.4(MANUFACTURE-Screw Holes)	-	0	Repeated Clause.
6(Finish)	-	0	Repeated Clause.

15 May, 2027

-
Included w.e.f 03.03.2025

6752

SHRI BAJRANG TESTING LABS, GREATER NOIDA

8183006

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

All

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	2000	-
9.5(Tensile Strength IS 12235(Part 13))	-	2500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	2000	-
9.3(Density IS 12235 (Part 14))	-	1500	-
9.2(Internal Diameter)	-	0	-
9.1( Visual Appearance)	-	500	-
9.1(Visual Appearance)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	0	-
8.4(Sealing rings - Hardness)	-	500	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	3000	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	0	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	0	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	0	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	-
7.3.2(Rib height)	-	0	-
7.3.1(No.of Ribs)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500	Total charges for the all dimension including Rs.-1500/-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	15000	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	0	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	0	-
5(COLOUR)	-	500	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	0	-
8.4(Width b)	-	0	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	0	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	0	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	0	-
5.0(Colour of Pipes)	-	0	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	5000	-
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	0	-
7.1(Screen Pipes)	-	0	-
11(Marking)	-	0	-
5.1(Materials)	-	0	-
8(Packing)	-	0	-
4.1.3(Cross Chain Length)	-	0	-
7.2(Link Twisted (Cross chain))	-	0	-
7.3(The Basic chains)	-	0	-
7.9(Case Depth)	-	0	-
8(Marking)	-	0	-
4.1.2(K-Value as per IS-4669)	-	0	-

01 Dec, 2027

-
-

6753

SHRI BAJRANG TESTING LABS, GREATER NOIDA

8183006

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All

23300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	500	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	500	-
6.3(General)	-	500	-
6.3(General)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	2000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	2000	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	1000	Total charges for all dimension including Rs-1000/-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	2000	-
8.3.4(Spacing ofEmitter Units)	-	500	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	2000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	5500	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2000	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	4000	-
8.8(Determination of Emitting Unit Exponent)	-	1000	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	1500	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	2000	-
4.2(Carbon black content)	-	2000	-
4.2(Carbon black dispersion)	-	1500	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.1.3(Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-

01 Dec, 2027

-
CI 5.1.2 (Cl 4.1(a) Polyethylene, (b) Antioxidant of IS 12786)

6754

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

FPS/FPT-1/FPT-2/XPS/XPT/E1/E2

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	500	-
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	500	-
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	500	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	1000	-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	1000	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	1000	-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1000	-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1000	-
7(Finish)	-	0	-
8.3(Dimensional Tolerances)	-	2000	-
9.2, 11.4(Moisture content)	-	500	-
11.10(screw withdrawal strength)	-	1000	-
Cl-9.6(Workability)	-	0	-
Cl-9.7 (Amendment No-5)(Formaldehyde Content/Emission, Fc)	-	1500	-
Cl-12 (Amendment No 1)(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	1000	-

30 Dec, 2027

-
Exclusion: Cl-9.7.2 (Steady State Formaldehyde Emission Value)

6755

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Gr I/ Grade II/ TYPE I/ TYPE II/ TYPE III/ TYPE V/E1/E2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	0	-
Cl 8(Dimensions & Tolerances)	-	2000	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 4(Grades & Types)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 7(Finish)	-	0	-
Cl 8(Dimensions & Tolerances)	-	2000	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	500	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.3(Test For Moisture Content)	-	500	-
Cl 10.2(Test For Density)	-	500	-
Cl 8(Dimensions & Tolerances)	-	2000	-
Cl 7(Finish)	-	0	-
Cl 6(Manufacture)	-	0	-
Cl 4(Grades & Types)	-	0	-
Cl 10.15(Test for Formaldehyde Content/Emission)	-	1500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

30 Dec, 2027

-
-

6756

MS TESTING LABORATORY LLP

8187716

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

16100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Lead Restriction)	-	500	-
4.1(Composition)	-	500	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	500	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	200	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	500	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	500	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	500	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	500	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	500	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	500	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	2000	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	500	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	500	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	500	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	500	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	500	-
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	7200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Visual Observation))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Visual Observation))	-	2000	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Degree of settling))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Change in Skinning))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Dried film))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Loss of Mass))	-	500	Complete testing charges including Keeping Properties is INR 16100/- For Keeping Properties testing charges is INR 8900/- Test Charges excluding keeping properties test is INR 7200/- Keeping properties test report will be done after one year.

28 Aug, 2028

-
-

6757

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

MR Grade / BWP Grade/BD/BN/PD/PN/MD/MN

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	0	-
9.2(Workmanship & Finish)	-	0	-
9.3(Workmanship & Finish)	-	0	-
11.1(Dimensions - Height)	-	500	-
11.1(Dimensions - Width)	-	500	-
11.1(Dimensions - Thickness)	-	500	-
11.1(Dimensions - Variation in thickness)	-	500	-
11.1(Dimensions - Squareness)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	500	-
11.1(Dimensions and Squareness Test)	-	500	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1000	-
11.4(Impact Indentation Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.7.1(Shock Resistance Test)	-	1000	-
11.7.2(Shock Resistance Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	1000	-
11.10(Misuse Test)	-	1000	-
11.11(Varying Humidity Test)	-	5000	-
11.11(Varying Humidity Test)	-	5000	-
11.12(End Immersion Test)	-	1000	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	500	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	500	-
Clause 11.2(General Flatness Test)	-	1000	-
Clause 11.3(Local Planeness Test)	-	1000	-
Clause 11.4(Impact Indentation Test)	-	1000	-
Clause 11.5(Flexure Test)	-	1000	-
Clause 11.6(Edge Loading Test)	-	1000	-
Clause 11.7(Shock Resistance Test)	-	1000	-
Clause 11.8(Buckling Resistance Test)	-	1000	-
Clause 11.9(Slamming Test)	-	1000	-
Clause 11.10(Misuse Test)	-	1000	-
Clause 11.11(Varying Humidity Test)	-	5000	-
Clause 11.12(End Immersion Test)	-	1000	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	1000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	1000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	500	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	1000	-
11.7(Shock Resistance Test)	-	1000	-
11.8(Buckling Resistance Test)	-	1000	-
11.9(Slamming Test)	-	1000	-
11.1(Misuse Test)	-	1000	-
11.11(Varying Humidity Test)	-	5000	-
11.12(End Immersion Test)	-	1000	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	1000	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
11.12(End immersion test)	-	1000	-
6.3(Cross-Bands )	-	0	-

30 Dec, 2027

-
-

6758

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

BWR/TYPE 1/TYPE 2/TYPE 3/ TYPE 4/TYPE 5/TYPE 6

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	0	-
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	500	-
8.2(Thickness)	-	500	-
8.3, Taable-1 (i)(Tolerance- Length)	-	500	-
9(WORKMANSHIP AND FINISH)	-	0	-
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	1000	-
11 (b)(For flame penetration)	-	1000	-
11 (c)(For rate of burning)	-	1000	-
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	1000	-
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	1000	-
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	1000	-
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	1000	-
12.2(Other Tests)	-	3000	-
14(Marking)	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-

30 Dec, 2027

-
-

6759

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/E1/E2

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	500	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	500	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-

30 Dec, 2027

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

6760

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

BWP Grade / Type CS, CSC, CSFF/ E1/ E2

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	500	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	0	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	500	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	0	-
Cl-10.3(Moisture Content)	-	1000	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength)	-	500	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to Water Test)	-	0	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	500	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	500	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	500	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	500	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a(Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-	1000	-
Cl-10.10, Table-4 (i) b(Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1500	-
Cl-10.12(Formaldehyde Content Test)	-	1500	-

30 Dec, 2027

-
Exclusion: Cl-10.5.2 (Water Resistance Test ) Cl-10.13 (Steady-State Formaldehyde Emission Test)

6761

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 8401 (1994)

Alkyl benzene sulphonic acid (Acid Slurry) - Specification (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	1000	-
5.2, table 1 (i)(Active matter as alkyl benzene sulphonic acid, % by mass, Min)	-	8500	-
5.2, table 1 (ii)(Free alkyl benzene, % by mass,Max)	-	2500	-
5.2, table 1 (iii)(Free sulphonic acid,5 by mass, Max)	-	3000	-
5.2, table 1 (iv)(Colour: a)of 10 % alcohol solution(mass by mass) in 1/4 in cell on Lovibond Tintometer, not darker than)	-	10000	a) of 10% alcoholic sol. (mass by mass) in 1/4 in cell on lovibond tintometer not darkar than INR 2000 b) of sol. In distilled water containing 5% active matter on Klett colorimeter max (in Klett) INR 8000
6.1(Packing)	-	0	Test not applicable
6.2(Marking)	-	0	Test not applicable
6.2(Marking)	-	0	Test not applicable

31 Dec, 2026

-
Included w.e.f.10.12.2024

6762

Sleen India Biz venture Private Limited, Agra

9139736

IS 206 (2010)

Tee and strap hinges - Specification (Fifth Revision)

Tee and Strap Hinges

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(DIMENSIONS AND TOLERANCES)	-	500	-
6(WORKMANSHIP)	-	100	-
7(FINISH)	-	100	-
10(MARKING)	-	100	-
Clause 3.1,1(Light weight (Type 1))	-	500	-
Clause 3.1,2(Light weight (Type 2))	-	500	-
Clause 3.1,3(Medium weight (Type 1))	-	500	-
Clause 3.1,4(Medium weight (Type 2))	-	500	-
Clause 3.1,5(Heavy weight (Type 1))	-	500	-
Clause 3.1,6(Heavy weight (Type 2))	-	500	-
Clause 3.1,7(Heavy weight (Type 3))	-	500	-
Clause 3.2,1(Light weight)	-	500	-
Clause 3.2,2(Medium weight (Type 1))	-	500	-
Clause 3.2,3(Medium weight (Type 2))	-	500	-
Clause 3.2,4(Heavy weight )	-	500	-
Clause 4 Table 1(i)(Mild steel sheet)	-	500	-
Clause 4 Table 1(ii)(Mild steel wire)	-	500	-
Clause 5.1(Dimensions)	-	500	-
Clause 6(Workmanship)	-	100	-
Clause 8(Packing)	-	100	-
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	100	-
Clause 10(Marking)	-	100	-
5(DIMENSIONS AND TOLERANCES)	-	0	Repeated clause.
6(WORKMANSHIP)	-	0	Repeated clause.
7(FINISH)	-	0	Repeated clause.
10(MARKING)	-	0	Repeated clause.
Clause 3.1,1(Light weight (Type 1))	-	0	Repeated clause.
Clause 3.1,2(Light weight (Type 2))	-	0	Repeated clause.
Clause 3.1,3(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.1,4(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.1,5(Heavy weight (Type 1))	-	0	Repeated clause.
Clause 3.1,6(Heavy weight (Type 2))	-	0	Repeated clause.
Clause 3.1,7(Heavy weight (Type 3))	-	0	Repeated clause.
Clause 3.2,1(Light weight)	-	0	Repeated clause.
Clause 3.2,2(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.2,3(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.2,4(Heavy weight )	-	0	Repeated clause.
Clause 4 Table 1(i)(Mild steel sheet)	-	0	Repeated clause.
Clause 4 Table 1(ii)(Mild steel wire)	-	0	Repeated clause.
Clause 5.1(Dimensions)	-	0	Repeated clause.
Clause 6(Workmanship)	-	0	Repeated clause.
Clause 8(Packing)	-	0	Repeated clause.
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	0	Repeated clause.
Clause 10(Marking)	-	0	Repeated clause.
5(DIMENSIONS AND TOLERANCES)	-	0	Repeated clause.
6(WORKMANSHIP)	-	0	Repeated clause.
7(FINISH)	-	0	Repeated clause.
10(MARKING)	-	0	Repeated clause.
Clause 3.1,1(Light weight (Type 1))	-	0	Repeated clause.
Clause 3.1,2(Light weight (Type 2))	-	0	Repeated clause.
Clause 3.1,3(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.1,4(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.1,5(Heavy weight (Type 1))	-	0	Repeated clause.
Clause 3.1,6(Heavy weight (Type 2))	-	0	Repeated clause.
Clause 3.1,7(Heavy weight (Type 3))	-	0	Repeated clause.
Clause 3.2,1(Light weight)	-	0	Repeated clause.
Clause 3.2,2(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.2,3(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.2,4(Heavy weight )	-	0	Repeated clause.
Clause 4 Table 1(i)(Mild steel sheet)	-	0	Repeated clause.
Clause 4 Table 1(ii)(Mild steel wire)	-	0	Repeated clause.
Clause 5.1(Dimensions)	-	0	Repeated clause.
Clause 6(Workmanship)	-	0	Repeated clause.
Clause 8(Packing)	-	0	Repeated clause.
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	0	Repeated clause.
Clause 10(Marking)	-	0	Repeated clause.
5(DIMENSIONS AND TOLERANCES)	-	0	Repeated clause.
6(WORKMANSHIP)	-	0	Repeated clause.
7(FINISH)	-	0	Repeated clause.
10(MARKING)	-	0	Repeated clause.
Clause 3.1,1(Light weight (Type 1))	-	0	Repeated clause.
Clause 3.1,2(Light weight (Type 2))	-	0	Repeated clause.
Clause 3.1,3(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.1,4(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.1,5(Heavy weight (Type 1))	-	0	Repeated clause.
Clause 3.1,6(Heavy weight (Type 2))	-	0	Repeated clause.
Clause 3.1,7(Heavy weight (Type 3))	-	0	Repeated clause.
Clause 3.2,1(Light weight)	-	0	Repeated clause.
Clause 3.2,2(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.2,3(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.2,4(Heavy weight )	-	0	Repeated clause.
Clause 4 Table 1(i)(Mild steel sheet)	-	0	Repeated clause.
Clause 4 Table 1(ii)(Mild steel wire)	-	0	Repeated clause.
Clause 5.1(Dimensions)	-	0	Repeated clause.
Clause 6(Workmanship)	-	0	Repeated clause.
Clause 8(Packing)	-	0	Repeated clause.
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	0	Repeated clause.
Clause 10(Marking)	-	0	Repeated clause.
5(DIMENSIONS AND TOLERANCES)	-	0	Repeated clause.
6(WORKMANSHIP)	-	0	Repeated clause.
7(FINISH)	-	0	Repeated clause.
10(MARKING)	-	0	Repeated clause.
Clause 3.1,1(Light weight (Type 1))	-	0	Repeated clause.
Clause 3.1,2(Light weight (Type 2))	-	0	Repeated clause.
Clause 3.1,3(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.1,4(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.1,5(Heavy weight (Type 1))	-	0	Repeated clause.
Clause 3.1,6(Heavy weight (Type 2))	-	0	Repeated clause.
Clause 3.1,7(Heavy weight (Type 3))	-	0	Repeated clause.
Clause 3.2,1(Light weight)	-	0	Repeated clause.
Clause 3.2,2(Medium weight (Type 1))	-	0	Repeated clause.
Clause 3.2,3(Medium weight (Type 2))	-	0	Repeated clause.
Clause 3.2,4(Heavy weight )	-	0	Repeated clause.
Clause 4 Table 1(i)(Mild steel sheet)	-	0	Repeated clause.
Clause 4 Table 1(ii)(Mild steel wire)	-	0	Repeated clause.
Clause 5.1(Dimensions)	-	0	Repeated clause.
Clause 6(Workmanship)	-	0	Repeated clause.
Clause 8(Packing)	-	0	Repeated clause.
Clause 9(SAMPLING AND CRITERION FOR CONFORMITY)	-	0	Repeated clause.
Clause 10(Marking)	-	0	Repeated clause.

15 May, 2027

-
Included w.e.f 28.07.2025

6763

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR/BWR/BWP

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	2500	-
4 Table (i)(BWR (Boiling Water Resistant))	-	2500	-
4 Table (i)(MR (Moisture Ressistant))	-	2500	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	2500	-
7.4(Acidity and Alkalinity ( pH))	-	1000	-

30 Dec, 2027

-
-

6764

EMC Testing and Compliance LLP, Gurugram

8141526

IS 11744 (2020)

Phosphorous Pentachloride, Technical - Specification ( First Revision )

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	2000	-
Table-1(Phosphorous pentachloride ( as PCl 5),)	-	3000	-
Table-1(Bulk density)	-	3000	-
Table-1(Sulphate)	-	3000	-
Table-1(Iron)	-	3000	-
Table-1(Lead)	-	3000	-

19 Jul, 2027

-
Included w.e.f.12.06.2025

6765

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(VISUAL)	-	300	-
3.2(specificgravity)	-	300	-
3.3(specificgravity)	-	300	-
3.4(specificgravity)	-	300	-
3.5(visual)	-	300	-
3.6(VISUAL)	-	300	-
3.7(VISUAL)	-	300	-
4(visual)	-	300	-
5(Design)	-	300	-
6(size & fitting)	-	300	-
7.1(visual)	-	300	-
7.1.1(Tear strength)	-	500	-
7.1.2(Abrasion resistance)	-	800	-
7.2(all test of table 1)	-	800	-
7.3(all test of table 2)	-	500	-
7.3(sulphur test)	-	500	-
7.4(Visual)	-	300	-
7.4.1(all test of table 3)	-	1000	-
7.5(Visual)	-	300	-
7.5.1(Tensile)	-	500	-
7.5.2(Thickness)	-	300	-
7.5.3(Upper flexing)	-	800	-
7.6(VISUAL)	-	300	-
7.6.1(Out sole thickness)	-	300	-
7.6.2(out sole tear strength)	-	500	-
7.6.3(out sole abrasion)	-	800	-
7.6.4(out sole flexing)	-	1000	-
7.6.5(Interlayer bond strength)	-	500	-
7.7(INSOCK Visual)	-	300	-
7.7.1(Insock thickness)	-	300	-
7.7.2(Insock abrasion)	-	800	-
8(CONSTRUCTION)	-	300	-
8.1(Hot contact)	-	500	-
8.2(Leak proofness)	-	500	-
8.3(Height of upper)	-	300	-
8.4(Adhesion test)	-	500	-
8.5(Resistance to acid & alkaline)	-	800	-
8.6(Resistance to fule oil)	-	500	-
8.7.1(Antistatic)	-	800	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	800	-
8.7.3(Elecrically nsulating footwear)	-	800	-
8.7.4(Resistance to cold)	-	1500	-
10(Visual OBSERVATION)	-	300	-
11.1(Visual OBSERVATION)	-	300	-
11.2(Visual OBSERVATION)	-	300	-
11.3(Visual OBSERVATION)	-	300	-

15 Apr, 2027

-
including w.e.f.10.10.2024

6766

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	300	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	300	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	300	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	800	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	300	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	300	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	2500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	500	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	300	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	800	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	300	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	300	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	300	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	2500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	300	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	300	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	800	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	300	-
5, 5.1(Requirement)	-	300	-
6.1(Marking)	-	300	-
6, 6.1(Packing)	-	300	-
5, 5.1(Requirement)	-	300	-
6.1(Marking)	-	300	-
6.2(Packing)	-	300	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	2500	-

15 Apr, 2027

-
including w.e.f.10.10.2024

6767

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 17988 (2022)

CHLORINATED POLYVINYL CHLORIDE CPVC RESIN SPECIFICATION

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grades)	-	0	Rs. 20000/- Excluding Special Requirements Rs. 14000/- for Special Requirements only For Basic resin test covered separately UNDER IS 17658
5.1(Basic Resin)	-	0	Rs. 20000/- Excluding Special Requirements Rs. 14000/- for Special Requirements only For Basic resin test covered separately UNDER IS 17658
5.2 Table - 1 (i)(K Value for PVC resin, Min)	-	2000	-
5.2 Table - 1 (ii)(Inherent Viscosity, Min)	-	2000	-
5.2 Table - 1 (iii)(Sieve Analysis, material retained on 250- micron sieve, percent by weight, Max)	-	1500	-
5.2 Table - 1 (iv)(Average Particle Size, micron)	-	2000	-
5.2 Table - 1 (v)(Apparent density, g/ml)	-	1500	-
5.2 Table - 1 (vi)(Dry Flow of 140 g, sec, Max)	-	1500	-
5.2 Table - 1 (vii)(Volatile Matter, percent, Max)	-	1500	-
5.2 Table - 1 (viii)(Chlorine Content, percent, Min)	-	1500	-
5.2 Table - 1 (ix)(RVCM Content, ppm, Max)	-	5000	-
5.2 Table - 1 (x)(Foreign Matter, Max)	-	1500	-
6(SPECIAL REQUIREMENTS OF POLYMER USED FOR MOULDING)	-	14000	1) RVCM Content INR 5000 2) Migration of RVCM into Food stuff INR 5000 3) Overall Migration INR 4000
7(Packing and Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

6768

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS/IEC 80601 : Part 2 : Sec 30 (2018)

Medical electrical equipment: Part 2 - 30 particular requirements for basic safety and essential performance of automated non - Invasive sphygmomanometers

950000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General)	-	25000	-
201.5(General requirements for testing ME EQUIPMENT)	-	30000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	10000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	10000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	40000	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	25000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	25000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	35000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	35000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	25000	-
201.15(Construction of ME EQUIPMENT)	-	30000	-
201.16(ME SYSTEMS)	-	20000	-
201.17(Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS)	-	350000	-
201.101(Requirements for CUFFS)	-	100000	-
201.102(Connection tubing and CUFF connectors)	-	100000	-
201.103(Maximum inflating time)	-	100000	-
201.105(Automatic cycling modes)	-	100000	-
201.106(Clinical accuracy)	-	100000	-
202(Electromagnetic disturbances – Requirements and tests)	-	350000	-
202.8(Electromagnetic IMMUNITY requirements for ME EQUIPMENT and ME SYSTEMS)	-	50000	-
206(Usability)	-	100000	-
210(Requirements for the development of physiologic closed-loop controllers)	-	100000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	100000	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	100000	-

05 Apr, 2027

-
included w.e.f. 21.10.2024 Exclusion CL 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) CL 202 (Electromagnetic disturbances – Requirements and tests)

6769

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 17046 (2018)

Fibre Optic Cable for Cable TV Application

Fibre Optic Cable

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Design and construction of aerial metal free optical fibre cable)	-	0	-
3.2(Fibre used in the cable)	-	0	-
3.3(Self-supporting metal free aerial optical fibre cable)	-	0	-
3.4(Technical Requirements)	-	0	-
3.5(Mechanical Characteristics)	-	0	-
3.6(Environmental Characteristic of Fibre)	-	0	-
3.7(Optical Fibre Cable Construction Specifications)	-	0	-
3.8(Mechanical Characteristics and Tests on Optical Fibre Cable)	-	124900	-
4(Marking)	-	0	-
3.1(Design and construction of aerial metal free optical fibre cable)	-	0	-
3.2(Fibre used in the cable)	-	0	-
3.3(Self-supporting metal free aerial optical fibre cable)	-	0	-
3.4(Technical Requirements)	-	0	-
3.5(Mechanical Characteristics)	-	0	-
3.6(Environmental Characteristic of Fibre)	-	0	-
3.7(Optical Fibre Cable Construction Specifications)	-	0	-
3.8(Mechanical Characteristics and Tests on Optical Fibre Cable)	-	0	-
4(Marking)	-	0	-

19 Mar, 2026

-
Included.w.e.f.26.12.2024

6770

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
5(General conditions for the tests)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
6(Classification)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
7(Marking and instructions)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
8(Protection against access to live parts)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
9(Starting of motor-operated appliances)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
10(Power input and current)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
11(Heating)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
13(Leakage current and electric strength at operating temperature)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
14(Transient overvoltages)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
15(Moisture resistance)	-	3000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
16(Leakage current and electric strength)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
17(Overload protection of transformers and associated circuits)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
18(Endurance)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19(Abnormal operation)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.1(Electrostatic discharges)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.2(Radiated fields)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.3(Fast transient bursts)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.4(Surge immunity test)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.5(Immunity to conducted discharges)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
19.11.4.7(Harmonics)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
20(Stability and mechanical hazards)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
21(Mechanical strength)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
22(Construction)	-	2000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
23(Internal wiring)	-	200	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
24(Components)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
25(Supply connection and external flexible cords)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
26(Terminals for external conductors)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
27(Provision for earthing)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
28(Screws and connections)	-	400	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
29(Clearances, creepage distances and solid insulation)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
30(Resistance to heat and fire)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
31(Resistance to rusting)	-	1000	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
32(Radiation, toxicity and similar hazards)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
A.101(Pressure test)	-	500	For BIS samples:1.5 tims of BIS testng charges. For others: Rs.12,000/- upto 2 KW and Rs.15000/- above 2 KW.(15% discount to BIS]
4(General requirement)	-	0	NIL
5(General conditions for the tests)	-	0	NIL
6(Classification)	-	0	NIL
7(Marking and instructions)	-	0	NIL
8(Protection against access to live parts)	-	0	NIL
9(Starting of motor-operated appliances)	-	0	NIL
10(Power input and current)	-	0	NIL
11(Heating)	-	0	NIL
13(Leakage current and electric strength at operating temperature)	-	0	NIL
14(Transient overvoltages)	-	0	NIL
15(Moisture resistance)	-	0	NIL
16(Leakage current and electric strength)	-	0	NIL
17(Overload protection of transformers and associated circuits)	-	0	NIL
18(Endurance)	-	0	NIL
19(Abnormal operation)	-	0	NIL
20(Stability and mechanical hazards)	-	0	NIL
21(Mechanical strength)	-	0	NIL
22(Construction)	-	0	NIL
23(Internal wiring)	-	0	NIL
24(Components)	-	0	NIL
25(Supply connection and external flexible cords)	-	0	NIL
26(Terminals for external conductors)	-	0	NIL
27(Provision for earthing)	-	0	NIL
28(Screws and connections)	-	0	NIL
29(Clearances, creepage distances and solid insulation)	-	0	NIL
30(Resistance to heat and fire)	-	0	NIL
31(Resistance to rusting)	-	0	NIL
A.101(Pressure test)	-	0	NIL
12(Charging of metal-ion batteries)	-	0	NIL
32(Radiation, toxicity and similar hazards)	-	0	NIL

31 Dec, 2026

-
Included w.e.f.05.11.2024 Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC)

6771

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 14286 : Part 1 : Sec 3 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic PV modules Third Revision

1985000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	20000	-
Cl-11.2(Maximum power determination)	-	30000	-
Cl-11.3(Insulation test)	-	15000	-
Cl-11.4(Measurement of temperature coefficients)	-	60000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC and NMOT)	-	30000	-
Cl-11.7(Performance at low irradiance)	-	30000	-
Cl-11.8(Outdoor exposure test)	-	30000	-
Cl-11.9(Hot-spot endurance test)	-	200000	-
Cl-11.10(UV preconditioning test)	-	150000	-
Cl-11.11(Thermal cycling test)	-	250000	-
Cl-11.12(Humidity-freeze test)	-	100000	-
Cl-11.13(Damp heat test)	-	150000	-
Cl-11.14(Robustness of terminations test)	-	15000	-
Cl-11.15(Wet leakage current test)	-	20000	-
Cl-11.16(Static mechanical load test)	-	40000	-
Cl-11.17(Hail test)	-	20000	-
Cl-11.18(Bypass diode testing)	-	80000	-
Cl-11.19(Stabilization)	-	300000	-
Cl-8(Major visual defects)	-	0	-
Cl-11.1(Visual inspection)	-	0	-
Cl-11.2(Maximum power determination)	-	0	-
Cl-11.3(Insulation test)	-	0	-
Cl-11.4(Measurement of temperature coefficients)	-	0	-
Cl-11.5(Measurement of nominal module operating temperature)	-	0	-
Cl-11.6(Performance at STC and NMOT)	-	0	-
Cl-11.7(Performance at low irradiance)	-	0	-
Cl-11.8(Outdoor exposure test)	-	0	-
Cl-11.9(Hot-spot endurance test)	-	0	-
Cl-11.10(UV preconditioning test)	-	0	-
Cl-11.11(Thermal cycling test)	-	0	-
Cl-11.12(Humidity-freeze test)	-	0	-
Cl-11.13(Damp heat test)	-	0	-
Cl-11.14(Robustness of terminations test)	-	0	-
Cl-11.15(Wet leakage current test)	-	0	-
Cl-11.16(Static mechanical load test)	-	0	-
Cl-11.17(Hail test)	-	0	-
Cl-11.18(Bypass diode testing)	-	0	-
Cl-11.19(Stabilization)	-	0	-
5(Marking and documentation)	-	5000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	120000	-
11.21(Potential induced degradation test (MQT 21))	-	300000	-
11.22(Bending test (MQT 22))	-	20000	-

20 Jun, 2028

-
Included w.e.f 05.11.2024

6772

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14549 (1998)

Hexaconazole, technical - Specification

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (g), Table 1 (i), Annex-A(Hexaconazole Content)	-	4000	-
Table 1 (ii)(Moisture Content)	-	1500	-
Table 1 (iii)(Acidity)	-	1200	-
Table 1 (iv)(Material insoluble in acetone)	-	1200	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

6773

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 17631 (2022)

Work Chairs - Specification

79500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
clause 4(DESIGN AND WORKMANSHIP)	-	2000	/
clause 5(DIMENSIONS)	-	2000	/
Cl-6.1 (a)(Resistance to mechanical damage)	-	10000	/
Cl-6.1 (b)(Pencil hardness)	-	1000	/
Cl-6.1 (c)(Resistance to wet heat;)	-	1000	/
Cl-6.1 (d)(Resistance to dry heat;)	-	1000	/
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	/
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	1000	/
Cl-6.1 (g)(Adhesive performance)	-	1000	/
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1000	/
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	/
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	/
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	2000	/
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	/
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	/
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	/
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	/
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	/
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	/
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	/
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	/
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	/
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	/
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1000	/
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1000	/
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	/
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1000	/
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	/
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1000	/
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1000	/
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1000	/
Cl-7.3.1(Front Edge Overturning)	-	1000	/
Cl-7.3.2(Forwards Overturning)	-	1000	/
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	/
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	/
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	/
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	/
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	/
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	/
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	/
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	/
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	/
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	/
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	/
Cl-7.5.1(Seat and Back Durability)	-	20000	/
Cl-7.5.2(Arm Rest Durability)	-	20000	/
Cl-7.5.3(Swivel Test)	-	20000	/
Cl-7.5.4(Foot-rest Durability)	-	20000	/
Cl-7.5.5(Castor and Chair-Base Durability)	-	20000	/
clause 4(DESIGN AND WORKMANSHIP)	-	2000	/
clause 5(DIMENSIONS)	-	2000	/
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	/
Cl-6.1 (b)(Pencil hardness)	-	1000	/
Cl-6.1 (c)(Resistance to wet heat;)	-	1000	/
Cl-6.1 (d)(Resistance to dry heat;)	-	1000	/
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	/
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	1000	/
Cl-6.1 (g)(Adhesive performance)	-	1000	/
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1000	/
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	/
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	/
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	2000	/
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	/
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	/
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	/
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	/
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	/
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	/
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	/
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	/
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	/
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	/
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1000	/
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1000	/
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	/
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1000	/
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	/
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1000	/
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1000	/
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1000	/
Cl-7.3.1(Front Edge Overturning)	-	1000	/
Cl-7.3.2(Forwards Overturning)	-	1000	/
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	/
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	/
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	/
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	/
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	/
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	/
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	/
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	/
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	/
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	/
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	/
Cl-7.5.1(Seat and Back Durability)	-	20000	/
Cl-7.5.2(Arm Rest Durability)	-	20000	/
Cl-7.5.3(Swivel Test)	-	20000	/
Cl-7.5.4(Foot-rest Durability)	-	20000	/
Cl-7.5.5(Castor and Chair-Base Durability)	-	20000	/
clause 4(DESIGN AND WORKMANSHIP)	-	2000	/
clause 5(DIMENSIONS)	-	2000	/
Cl-6.1 (a)(Resistance to mechanical damage)	-	1000	/
Cl-6.1 (b)(Pencil hardness)	-	1000	/
Cl-6.1 (c)(Resistance to wet heat;)	-	1000	/
Cl-6.1 (d)(Resistance to dry heat;)	-	1000	/
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	1000	/
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	1000	/
Cl-6.1 (g)(Adhesive performance)	-	1000	/
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	1000	/
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	1000	/
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	1000	/
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	2000	/
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	1000	/
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	1000	/
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	1000	/
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	1000	/
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	1000	/
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	1000	/
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	1000	/
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	1000	/
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	1000	/
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	1000	/
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	1000	/
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	1000	/
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	1000	/
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	1000	/
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	1000	/
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	1000	/
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	1000	/
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	1000	/
Cl-7.3.1(Front Edge Overturning)	-	1000	/
Cl-7.3.2(Forwards Overturning)	-	1000	/
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	1000	/
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	1000	/
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	1000	/
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	1000	/
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	1000	/
Cl-7.4.1(Seat Front Edge Static Load Test)	-	2000	/
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	2000	/
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	2000	/
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	2000	/
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	2000	/
Cl-7.4.6(Foot Rest Static Load Test)	-	2000	/
Cl-7.5.1(Seat and Back Durability)	-	20000	/
Cl-7.5.2(Arm Rest Durability)	-	20000	/
Cl-7.5.3(Swivel Test)	-	20000	/
Cl-7.5.4(Foot-rest Durability)	-	20000	/
Cl-7.5.5(Castor and Chair-Base Durability)	-	20000	/
clause 4(DESIGN AND WORKMANSHIP)	-	0	/
clause 5(DIMENSIONS)	-	0	/
Cl-6.1 (a)(Resistance to mechanical damage)	-	0	/
Cl-6.1 (b)(Pencil hardness)	-	0	/
Cl-6.1 (c)(Resistance to wet heat;)	-	0	/
Cl-6.1 (d)(Resistance to dry heat;)	-	0	/
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	0	/
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	0	/
Cl-6.1 (g)(Adhesive performance)	-	0	/
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	0	/
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	0	/
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	0	/
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	0	/
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	0	/
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	0	/
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	0	/
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	0	/
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	0	/
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	0	/
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	0	/
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	0	/
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	0	/
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	0	/
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	0	/
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	0	/
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	0	/
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	0	/
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	0	/
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	0	/
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	0	/
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	0	/
Cl-7.3.1(Front Edge Overturning)	-	0	/
Cl-7.3.2(Forwards Overturning)	-	0	/
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	0	/
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	0	/
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	0	/
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	0	/
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	0	/
Cl-7.4.1(Seat Front Edge Static Load Test)	-	0	/
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	0	/
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	0	/
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	0	/
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	0	/
Cl-7.4.6(Foot Rest Static Load Test)	-	0	/
Cl-7.5.1(Seat and Back Durability)	-	0	/
Cl-7.5.2(Arm Rest Durability)	-	0	/
Cl-7.5.3(Swivel Test)	-	0	/
Cl-7.5.4(Foot-rest Durability)	-	0	/
Cl-7.5.5(Castor and Chair-Base Durability)	-	0	/
clause 4(DESIGN AND WORKMANSHIP)	-	0	/
clause 5(DIMENSIONS)	-	0	/
Cl-6.1 (a)(Resistance to mechanical damage)	-	0	/
Cl-6.1 (b)(Pencil hardness)	-	0	/
Cl-6.1 (c)(Resistance to wet heat;)	-	0	/
Cl-6.1 (d)(Resistance to dry heat;)	-	0	/
Cl-6.1 (e)(Resistance to marking by cold liquids)	-	0	/
Cl-6.1 (f)(Resistance to marking by cold oils and fats;)	-	0	/
Cl-6.1 (g)(Adhesive performance)	-	0	/
Cl-6.2 (a) (1)(For Fabric and Synthetic Leather:- Breaking load)	-	0	/
Cl-6.2 (a) (2)(For Fabric and Synthetic Leather:- Elongation at break)	-	0	/
Cl-6.2 (a) (3)(For Fabric and Synthetic Leather:- Tear strength)	-	0	/
Cl-6.2 (a) (4)(For Fabric and Synthetic Leather:- Colour fastness to light)	-	0	/
Cl-6.2 (a) (5)(For Fabric and Synthetic Leather:- Colour fastness to rubbing)	-	0	/
Cl-6.2 (a) (6)(For Fabric and Synthetic Leather:- Colour fastness to perspiration)	-	0	/
Cl-6.2 (a) (7)(For Fabric and Synthetic Leather:- Colour fastness to water)	-	0	/
Cl-6.2 (a) (8)(For Fabric and Synthetic Leather:- Pilling resistance)	-	0	/
Cl-6.2 (a) (9)(For Fabric and Synthetic Leather:- Coating adhesion strength)	-	0	/
Cl-6.2 (a) (10)(For Fabric and Synthetic Leather:- Seam slippage)	-	0	/
Cl-6.2 (a) (11)(For Fabric and Synthetic Leather:- Resistance to damage by flexing)	-	0	/
Cl-6.2 (a) (12)(For Fabric and Synthetic Leather:- Abrasion resistance)	-	0	/
Cl-6.2 (a) (13)(For Fabric and Synthetic Leather:- Bursting strength)	-	0	/
Cl-6.2 (a) (14)(For Fabric and Synthetic Leather:- Resistance to cold)	-	0	/
Cl-6.2 (b) (1)(For Natural Leather:- Tear strength)	-	0	/
Cl-6.2 (b) (2)(For Natural Leather:- Flexing endurance)	-	0	/
Cl-6.2 (b) (3)(For Natural Leather: Finish adhesion)	-	0	/
Cl-6.2 (b) (4)(For Natural Leather: Colour fastness to artificial light)	-	0	/
Cl-6.2 (b) (5)(For Natural Leather: Colour fastness to rubbing)	-	0	/
Cl-6.2 (b) (6)(For Natural Leather: Colour fastness to water spotting)	-	0	/
Cl-6.2 (b) (7)(For Natural Leather: Water vapour permeability)	-	0	/
Cl-6.2 (b) (8)(For Natural Leather: Colour fastness to water)	-	0	/
Cl-7.3.1(Front Edge Overturning)	-	0	/
Cl-7.3.2(Forwards Overturning)	-	0	/
Cl-7.3.3(Forwards Overturning for Chairs with Foot Rest)	-	0	/
Cl-7.3.4(Sideways Overturning for Chairs Without Arm Rests)	-	0	/
Cl-7.3.5(Sideways Overturning for Chairs With Arm Rests)	-	0	/
Cl-7.3.6(Rearwards Overturning for Chairs Without Back Rest Inclination)	-	0	/
Cl-7.3.7(Rearwards Overturning for Chairs with Backrest Inclination)	-	0	/
Cl-7.4.1(Seat Front Edge Static Load Test)	-	0	/
Cl-7.4.2(Combined Seat and Back Static Load Test)	-	0	/
Cl-7.4.3(Arm Rest Downward Static Load Test — Central)	-	0	/
Cl-7.4.4(Arm Rest Downward Static Load Test — Front)	-	0	/
Cl-7.4.5(Arm Rest Sideways Static Load Test)	-	0	/
Cl-7.4.6(Foot Rest Static Load Test)	-	0	/
Cl-7.5.1(Seat and Back Durability)	-	0	/
Cl-7.5.2(Arm Rest Durability)	-	0	/
Cl-7.5.3(Swivel Test)	-	0	/
Cl-7.5.4(Foot-rest Durability)	-	0	/
Cl-7.5.5(Castor and Chair-Base Durability)	-	0	/

26 Sep, 2027

-
Included w.e.f 18.10.2024

6774

ATCC TEST LABS LLP

8172626

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	300	-
Cl-5(General notes on tests)	-	200	-
Cl-6(Rating)	-	500	-
Cl-7(Classification)	-	200	-
Cl-8(Marking)	-	300	-
Cl-9(Checking of dimensions)	-	500	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	500	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	300	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	200	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	300	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	200	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	500	-
Cl-11(Provision for earthing)	-	500	-
Cl-12(Terminals)	-	1000	-
Cl-13(Constructional requirements)	-	1000	-
Cl-14(Mechanism)	-	1000	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	500	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	500	-
Cl-16.3(Electric Strength Test)	-	500	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	1000	-
Cl-19(Normal operation)	-	1000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	500	-
Cl-22(Screws, current carrying parts and connections)	-	300	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	200	-
Cl-24.1(Resistance to abnormal heat and fire)	-	500	-
Cl-24.2(Resistance to tracking)	-	200	-
Cl-25(Resistance to rusting)	-	300	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	1000	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	1000	-
13.5(Attachment of knobs)	-	500	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	500	-
12.3.12(Table 13)(Deflection Test Forces)	-	500	-

15 Jun, 2026

-
Revised version of IS 3854:2023 Included w.e.f. 01.10.2024

6775

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 18385 (2023)

Hot- Dip galvanized/galvannealed Steels Sheet and strips for Automotive Applications- Specification

ALL

25000 View breakup
-

Clause No.	Exclusion	Remark
Clause. 4.5(Surface Finish)	-	-
Clause. 5.0(Material)	-	-
Clause. 8.0(Tensile Test)	-	-
Clause. 8.0(Yield Stress or Proof stress)	-	-
Clause. 8.0(Elongation)	-	-
Clause. 8.0(Plastic strain Ratio)	-	-
Clause. 8.0(Tensile Strain Hardening Component)	-	-
Clause. 8.0(Bake Hardening Index)	-	-
Clause. 8.0(Hole Expansion Ratio)	-	-
Clause. 8.0(Bend Test)	-	-
Clause.9.0(Coating Mass)	-	-
Clause.9.0(Coating Adherence)	-	-
Clause.10.0(Dimensions, Shape & Tolerances)	-	-
Clause.11.0(Freedom From Defects)	-	-
Clause.19.0(Mass)	-	-
7(C)	-	-
7(Mn)	-	-
7(S)	-	-
7(P)	-	-
7(Si)	-	-
7(B)	-	-
7(Ti)	-	-
7(Nb)	-	-
7(V)	-	-
7(N)	-	-
7(Al)	-	-
7(Cr)	-	-
7(Mo)	-	-
7(Ni)	-	-
Clause. 4.5(Surface Finish)	-	-
Clause. 5.0(Material)	-	-
Clause. 8.0(Tensile Test)	-	-
Clause. 8.0(Yield Stress or Proof stress)	-	-
Clause. 8.0(Elongation)	-	-
Clause. 8.0(Plastic strain Ratio)	-	-
Clause. 8.0(Tensile Strain Hardening Component)	-	-
Clause. 8.0(Bake Hardening Index)	-	-
Clause. 8.0(Hole Expansion Ratio)	-	-
Clause. 8.0(Bend Test)	-	-
Clause.9.0(Coating Mass)	-	-
Clause.9.0(Coating Adherence)	-	-
Clause.10.0(Dimensions, Shape & Tolerances)	-	-
Clause.11.0(Freedom From Defects)	-	-
Clause.19.0(Mass)	-	-
7(C)	-	-
7(Mn)	-	-
7(S)	-	-
7(P)	-	-
7(Si)	-	-
7(B)	-	-
7(Ti)	-	-
7(Nb)	-	-
7(V)	-	-
7(N)	-	-
7(Al)	-	-
7(Cr)	-	-
7(Mo)	-	-
7(Ni)	-	-
6.4(Zinc and zinc alloy ingots used for Galvanizing)	-	-

25 Feb, 2027

-
Included w.e.f 10.02.2025

6776

Aaditech Test and Calibration Lab LLP

8179926

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

1100V

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	2000	-
11.2(Legibility)	-	2000	-
11.1(Durability)	-	2000	-
11(Identification)	-	2000	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000	-
10.4(Flammability test- Unaffected portion)	-	2000	-
10.4(Flammability test-Burning after flame removal)	-	2000	-
table 1 e) 3) (IR constant- max. Temp)	-	2000	-
table 1 e) 3) (IR constant- Room temp )	-	2000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	2000	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	2000	-
10.2(HV (room temperature))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.8(Smoke density rating)	-	2000	-
10.6(Halogen evolution)	-	2000	-
10.7(Temperature index)	-	2000	-
10.5(Oxygen index)	-	2000	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	2000	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	2000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	2000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	2000	-
Table 1(Category Code)	-	2000	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	2000	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	2000	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	2000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	2000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	2000	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	2000	-
Table 1 iii) d) 4)(Cracks Observed)	-	2000	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	2000	-
Table 1 iii) c) 4)(Cracks Observed)	-	2000	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	2000	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2000	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2000	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2000	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2000	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	2000	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	2000	-
Table 1 iii) c) 3)(Elongation variation)	-	2000	-
Table 1 iii) c) 3)(TS variation)	-	2000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	2000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	2000	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	2000	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	2000	-
8.3(Thickness of Sheath)	-	2000	-
5.2(Application )	-	2000	-
5.3(Thickness of Insulation)	-	2000	-
9.1(Ovality)	-	2000	-
9(Overall dimensions)	-	2000	-
10.11(Per sulphate test (for tinned Cu cable only))	-	2000	-
4.2(Conductor resistance test)	-	2000	-
4.1(Wrapping test (for Al))	-	2000	-
4.1(Tensile test (for Al)- After Stranding)	-	2000	-
4.1(Tensile test (for Al)-Before Stranding)	-	2000	-
4.1(Annealing test (for copper))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	2000	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	2000	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	2000	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	2000	-
12(CONSTRUCTION Core Identification)	-	2000	-
8.1(Sheath Material )	-	2000	-
7(Binder Tape)	-	2000	-
6.2(Filler)	-	2000	-
6.1(Filler)	-	2000	-
5.1(Insulation)	-	2000	-
4.4(Joints in Conductor)	-	2000	-
4.1(Conductor - Material)	-	2000	-
10.11(Persulphate Test )	-	2000	-
12.0(Core identification)	-	2000	-
4, IS 8130(Construction of conductor)	-	2000	-
Table 2, IS 8130(No fo wire in a conductor)	-	2000	-
8.3(Minimum thickness of Sheath)	-	2000	-
8.3(Avarage thickness of Sheath)	-	2000	-
5.3(Minimum thickness of insulation)	-	2000	-
5.3(Avarage thickness of insulation)	-	2000	-
table 1, 4.2(insulation resistance test)	-	2000	-
5.4(Mechanical properties before and after ageing)	-	2000	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2000	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	2000	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	2000	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	2000	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	2000	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	2000	-
4.4(Joints in Conductor)	-	2000	-
4.1(Conductor - Material)	-	2000	-
10.3(Spark test)	-	2000	-
10.3(Spark Test)	-	2000	-
Table 4(Copper purity test)	-	2000	-
4.1(Material)	-	2000	-
4.2(Electrical Resistance)	-	2000	-
5(INSULATION)	-	2000	-
6(FILLER)	-	2000	-
7(BINDER TAPE)	-	2000	-
8(SHEATH)	-	2000	-
9(OVERALL DIMENSIONS)	-	2000	-
10.1(High Voltage Test (Water Immersion Test))	-	2000	-
10.2(High Voltage Test (at Room Temperature))	-	2000	-
10.3(Spark Test)	-	2000	-
10.4(Flammability Test)	-	2000	-
10.5(Oxygen Index Test)	-	2000	-
10.6(Test for Halogen Acid Gas Evolution)	-	2000	-
10.7(Test for Temperature Index)	-	2000	-
10.8(Smoke Density Rating)	-	2000	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
10.1(Flex Test)	-	2000	-
10.11(Persulphate Test)	-	2000	-
11(IDENTIFICATION)	-	2000	-
12(CORE IDENTIFICATION)	-	2000	-
13(CABLE CODE)	-	2000	-
15(PACKING AND MARKING)	-	2000	-
16.1(Construction)	-	2000	-
16.2(Tests)	-	2000	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	2000	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	2000	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	2000	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	2000	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	2000	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	2000	-

28 Aug, 2027

-
-

6777

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1170 (1992)

Ferrochromium - Specification (Second Revision)

15900 View breakup
-

Clause No.	Exclusion	Remark
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	-
8.5(Residual elements)	-	-
9.5(Manganese)	-	-
10.5(Nickle)	-	-
11.5(Vanadium)	-	-
12.5(Copper)	-	-
13.5(Molybdenum)	-	-
14.5(Columbium)	-	-
15.5(Tantalum)	-	-
16.5(Cobalt)	-	-
17.5(Aluminium)	-	-
18.5(Titanium)	-	-
19.5(Zirconium)	-	-
20.5(Arsenic)	-	-
21.5(Lead)	-	-
22.5(Tin)	-	-
23.5(Zinc)	-	-
24.5(Boron)	-	-
25.5(Antimony)	-	-
26.5(Silver)	-	-
27.5(Bismuth)	-	-
10(Extraneous contamination)	-	-
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	-
8.5(Residual elements)	-	-
9.5(Manganese)	-	-
10.5(Nickle)	-	-
11.5(Vanadium)	-	-
12.5(Copper)	-	-
13.5(Molybdenum)	-	-
14.5(Columbium)	-	-
15.5(Tantalum)	-	-
16.5(Cobalt)	-	-
17.5(Aluminium)	-	-
18.5(Titanium)	-	-
19.5(Zirconium)	-	-
20.5(Arsenic)	-	-
21.5(Lead)	-	-
22.5(Tin)	-	-
23.5(Zinc)	-	-
24.5(Boron)	-	-
25.5(Antimony)	-	-
26.5(Silver)	-	-
27.5(Bismuth)	-	-
9 , Table 2(Size Range)	-	-
10(Extraneous contamination)	-	-
9 , Table 2(Size Range)	-	-
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	-
8.5(Residual elements)	-	-
9.5(Manganese)	-	-
10.5(Nickle)	-	-
11.5(Vanadium)	-	-
12.5(Copper)	-	-
13.5(Molybdenum)	-	-
14.5(Columbium)	-	-
15.5(Tantalum)	-	-
16.5(Cobalt)	-	-
17.5(Aluminium)	-	-
18.5(Titanium)	-	-
19.5(Zirconium)	-	-
20.5(Arsenic)	-	-
21.5(Lead)	-	-
22.5(Tin)	-	-
23.5(Zinc)	-	-
24.5(Boron)	-	-
25.5(Antimony)	-	-
26.5(Silver)	-	-
27.5(Bismuth)	-	-
10(Extraneous contamination)	-	-
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	-
8.5(Residual elements)	-	-
9.5(Manganese)	-	-
10.5(Nickle)	-	-
11.5(Vanadium)	-	-
12.5(Copper)	-	-
13.5(Molybdenum)	-	-
14.5(Columbium)	-	-
15.5(Tantalum)	-	-
16.5(Cobalt)	-	-
17.5(Aluminium)	-	-
18.5(Titanium)	-	-
19.5(Zirconium)	-	-
20.5(Arsenic)	-	-
21.5(Lead)	-	-
22.5(Tin)	-	-
23.5(Zinc)	-	-
24.5(Boron)	-	-
25.5(Antimony)	-	-
26.5(Silver)	-	-
27.5(Bismuth)	-	-
9 , Table 2(Size Range)	-	-
10(Extraneous contamination)	-	-
9 , Table 2(Size Range)	-	-

25 Feb, 2027

-
-

6778

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

ALL

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	220000	Complete testing charge is Rs. 42000 excluding fire resistance test. Rs.220000 for fire resistance test.
Clause. 7.0(Finish)	-	0	-
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	0	-
Clause. 7.0(Finish)	-	0	-
Clause. 5.0(CaSO4.2H2O)	-	0	-
Clause. 5.0(Free water (Natural / By -product))	-	0	-
Clause. 5.0(pHvalue (Natural / By -product))	-	0	-
Clause. 5.0(SiO2)	-	0	-
Clause. 5.0(Chloride content)	-	0	-
Clause. 6.0(Manufacturing)	-	0	-
Clause. 7.0(Dimensions)	-	0	-
Clause. 7.0(Tolerances)	-	0	-
Clause. 7.0(Density)	-	0	-
Clause. 7.0(Flexural Breaking Load)	-	0	-
Clause. 7.0(Impact Resistance)	-	0	-
Clause. 7.0(Surface Hardness)	-	0	-
Clause. 7.0(Loading Capability)	-	0	-
Clause. 7.0(Water Absorption)	-	0	-
Clause. 7.0(Fire Resistance)	-	0	-
Clause. 7.0(Finish)	-	0	-

08 Feb, 2027

-
Included w.e.f 29.04.2025

6779

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

458000 View breakup
-

Clause No.	Exclusion	Remark
5.1.4(Carbon black, Density)	-	-
5.1.1(Density)	-	-
5.1.2(Melt Flow Index)	-	-
5.1.4(Carbon black, Toluene extract)	-	-
5.1.4(Carbon black, Volatile matter)	-	-
5.1.4(Carbon black, particle size)	-	-
5.1.4(Carbon black, Tint strength)	-	-
5.1.5(UV Stabilizer)	-	-
5.2.1(Visual Appearance)	-	-
5.2.2(Film Form)	-	-
5.2.4(Odour)	-	-
5.3.1.1(Tolerance on thickness)	-	-
5.3.1.2(Tolerance on width)	-	-
5.3.2(Impact Strength)	-	-
5.3.2, Table 1(Nominal Film Thickness)	-	-
5.3.2, Table 1(Impact Failure Mass)	-	-
5.3.3(Tensile Strength at Break)	-	-
5.3.4(Elongation at Break)	-	-
5.3.5(Coefficient of Friction)	-	-
5.3.6(Elmendorf Tear Strength)	-	-
5.3.7(Opacity)	-	-
5.4, Table 2(Carbon black, percent)	-	-
5.4, Table 2(Ash content, percent)	-	-
5.4, Table 2(Carbon black dispersion)	-	-
5.5(Service Life)	-	-
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	-
506(Solar Reflectance for Reflective Mulch Film)	-	-
Cl.5.4(Carbon Black percent (w/w)- Annex A)	-	-
Cl.5.4(Ash content percent (w/w)- Annex A)	-	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	-
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	-
506(Solar Reflectance for Reflective Mulch Film)	-	-
Cl.5.4(Carbon Black percent (w/w)- Annex A)	-	-
Cl.5.4(Ash content percent (w/w)- Annex A)	-	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	-
Cl.5.4(Carbon Black Dispersion- Cl.16 of IS 2530)	-	-

25 Feb, 2027

-
Included w.e.f 28.03.2025

6780

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1921 (2005)

Flux cored solder wire - Specification (Second Revision)

ALL

34900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(CHEMICAL COMPOSITION)	-	34900	-
CLAUSE 5.1.1(Activated flux)	-	34900	-
CLAUSE 5.1.2(Non-activated flux)	-	34900	-
CLAUSE 6.1(Hardening)	-	34900	-
CLAUSE 6.2(Freedom from Corrosive Action)	-	34900	-
CLAUSE 7(DIMENSIONS)	-	34900	-
CLAUSE 8(SAMPLING FOR TESTS)	-	34900	-
CLAUSE 9(RETEST AND REJECTION)	-	34900	-
CLAUSE 4(CHEMICAL COMPOSITION)	-	34900	-
CLAUSE 5.1.1(Activated flux)	-	34900	-
CLAUSE 5.1.2(Non-activated flux)	-	34900	-
CLAUSE 6.1(Hardening)	-	34900	-
CLAUSE 6.2(Freedom from Corrosive Action)	-	34900	-
CLAUSE 7(DIMENSIONS)	-	34900	-
CLAUSE 8(SAMPLING FOR TESTS)	-	34900	-
CLAUSE 9(RETEST AND REJECTION)	-	34900	-
CLAUSE 4(CHEMICAL COMPOSITION)	-	34900	-
CLAUSE 5.1.1(Activated flux)	-	34900	-
CLAUSE 5.1.2(Non-activated flux)	-	34900	-
CLAUSE 6.1(Hardening)	-	34900	-
CLAUSE 6.2(Freedom from Corrosive Action)	-	34900	-
CLAUSE 7(DIMENSIONS)	-	34900	-
CLAUSE 8(SAMPLING FOR TESTS)	-	34900	-
CLAUSE 9(RETEST AND REJECTION)	-	34900	-

25 Feb, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number