BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15462 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

6781

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17730 : Part 2 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 2 Woven Hail Protection Nets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7, Table 1, (i) (Mass in g/m2, (with a tolerance of ± 5 percent))	-
Clause 7, table 1, (ii) a ("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-
Clause 7,table 1, (ii) b ("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-
Clause 7, table 1, (iii) ("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-
Clause 7, table 1, (vii) (Porosity, percent)	-
Clause 7, table 1, (ix) (Seam (joint) strength, percent, Min)	-
7.1 (Dimensions)	-
Cl-4.1 (HDPE Monofilament)	-
Cl-6.1 (Fabric)	-
Cl-6.2 (Reinforcement)	-
Cl-6.3 (Joints)	-
Cl-6.4 (Stitching)	-
Cl-6.5 (Colour)	-

-
Except Raw material, Colour fastness to artificial light, Bursting pressure, Shading percentage, Cold cracking resistance test and Limited test facility for UV resistance test.

6782

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17730 : Part 1 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 1 Warp Knitted Hail Protection Nets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7, Table 1, (i) (Mass in g/m2, (with a tolerance of ± 5 percent))	-
Clause 7, table 1, (ii) a ("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-
Clause 7,table 1, (ii) b ("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-
Clause 7, table 1, (iii) ("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-
Clause 7, table 1, (viii) (Seam (joint) strength, percent, Min)	-
4.1 (HDPE Monofilament (linear density))	-
6.1 (Fabric (width))	-
6.2 (Reinforcement)	-
6.3 (Joints)	-
6.4 (Stitching)	-
6.5 (Colour)	-
7.1 (Length, Width)	-

-
Except Raw material, Colour fastness to artificial light, Bursting pressure, Shading percentage, Cold cracking resistance test and Limited test facility for UV resistance test.

6783

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17357 (2020)

Agro textiles – Harvest nets for agriculture and horticulture purposes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (HDPE Monofilament density)	-
Clause No. 5.1 (Width of the Fabric)	-
Clause No. 6.2 (i) (Mass g/m²)	-
Clause No. 6.2 (ii) (Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-
Clause No. 6.2 (iii) (Retention of breaking strength after UV exposure of 144 h)	-
Clause 7.1 (Length of the monofilament harvest nets)	-
4.1 (MATERIALS - HDPE Monofilament)	-
5.1 (MANUFACTURE - Fabric)	-
5.2 (MANUFACTURE - Colour)	-
5.3 (MANUFACTURE - Fixing of Eyelets)	-
7.1 (Packing)	-
7.2 (Marking)	-

-
Except Raw material Colour fastness to artificial light, Bursting pressure, Air permeability

6784

DELHI TEST HOUSE, Azadhpur

8131406

IS 2887 (2017)

Laundry soap powders/flakes - Specification (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 (5.1.1)(Description)	-	500	NA
5 (5.1.2)(Odour and lathering Properties)	-	500	NA
5.2,7.31 and 8.1Table 1(Total fatty matter)	-	2000	NA
5.2,7.31 and 8.1Table 1(Rosin acid)	-	2000	NA
5.2,7.31 and 8.1Table 1(Unsaponifiable matter)	-	2000	NA
5.2,7.31 and 8.1Table 1(Free caustic alkali)	-	1000	NA
5.2,7.31 and 8.1Table 1(Matter insoluble in alcohol)	-	2000	NA
5.2,7.31 and 8.1Table 1(Glycerol)	-	1500	NA
5.2,7.31 and 8.1Table 1(Hexbromide test ( on fatty acid))	-	500	NA
5.2,7.31 and 8.1Table 1(Active alkalinity)	-	500	NA
5.2,7.31 and 8.1Table 1(Chloride (as sodium chloride))	-	500	NA
5.2,7.31 and 8.1Table 1(LSD?NSD)	-	1500	NA

17 Jun, 2027

-
-

6785

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17356 (2020)

Agro textiles – Windshield nets for agriculture and horticulture purposes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 4.1 (HDPE Monofilament density)	-
Clause No. 5.1 (Width of the Fabric)	-
Clause No. 5.2.1 (Length of the Eyelet)	-
Clause No. 5.2.1 (Eyelet to Eyelet Edge Distance)	-
Clause No. 6 (Mass of the windshield nets)	-
Clause 7.2 (i) (Mass g/m²)	-
Clause 7.2 (ii) (Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-
Clause 7.2 (iii) (Retention of breaking strength after UV exposure of 144 h)	-
5.1 (MANUFACTURE - Fabric)	-
5.3 (MANUFACTURE - Colour)	-
6 (TYPES - a) Type 1, b) Type 2)	-
8.1 (Packing)	-
8.2 (Marking)	-

-
Except Raw material, Colour fastness to artificial , Bursting pressure and Wind blockage.

6786

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 17355 (2020)

Agro textiles – Propylene spun bonded non-woven mulch mat for agricultural and horticultural applications - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no. 6.1 & 8.3, Table-1 (i) (Lengthwise)	-
Clause no. 6.1 & 8.3, Table-1 (ii) (Width)	-
Clause no. 6.1 & 8.3, Table-1 (iii) (Mass)	-
Clause no. 6.1 & 8.3, Table-1 (iv) (Thickness)	-
Clause no. 6.1 & 8.3, Table-1 (v) a) (Tensile Strength, Machine Direction)	-
Clause no. 6.1 & 8.3, Table-1 (v) b) (Tensile Strength, Cross Direction)	-
Clause no. 6.1 & 8.3, Table-1 (vi) a) (Elongation, Machine Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vi) b) (Elongation, Cross Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vii) a) (UV stability, retained strength after UV exposure, Machine Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (vii) b) (UV stability, retained strength after UV exposure, Cross Dir.)	-
Clause no. 6.1 & 8.3, Table-1 (viii) (Colour)	-
Clause no. 6.1 & 8.3, Table-1 (ix) (Ash Content)	-
Clause no. 6.1 & 8.3, Table-1 (x) a) (Trapezoid Tear Strength, Machine Direction)	-
Clause no. 6.1 & 8.3, Table-1 (x) b) (Trapezoid Tear Strength, Cross Direction)	-
Clause No. 4-(a) (Mass)	-

-
-

6787

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	200	-
6(Standard ratings)	-	200	-
7(Classification)	-	200	-
8(Marking)	-	500	-
9(Dimensions)	-	700	-
10(Protection against electric shock)	-	700	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	1000	-
13(Construction)	-	500	-
14(Switched lampholders)	-	500	-
15(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	1000	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	500	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	700	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	500	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	200	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	300	-
4(General requirements)	-	200	-
6(Standard ratings)	-	200	-
7(Classification)	-	200	-
8(Marking)	-	500	-
9(Dimensions)	-	700	-
10(Protection against electric shock)	-	700	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	1000	-
13(Construction)	-	500	-
14(Switched lampholders)	-	500	-
15(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	1000	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	500	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	700	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	500	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	200	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	300	-
4(General requirements)	-	200	-
6(Standard ratings)	-	200	-
7(Classification)	-	200	-
8(Marking)	-	500	-
9(Dimensions)	-	700	-
10(Protection against electric shock)	-	700	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	1000	-
13(Construction)	-	500	-
14(Switched lampholders)	-	500	-
15(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	1000	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	500	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	700	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	500	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	2000	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	200	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	300	-

23 Jun, 2028

-
Included.w.e.f.15.01.2025

6788

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-
6.5 ( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-
6. Table 2 i) IS 1964 (Mass)	-
6. Table 2 vii) Annex C (Puncture strength)	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-
4,4.1 IS 6192 ( MATERIALS HDPE Tapes)	-
4.2 IS 6899 (MATERIALS HDPE Fabric)	-
5,5.1 (MANUFACTURE Lamination )	-
6.7 IS 1969 (Part 1) (Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-

-
Except Raw material test, Retention of breaking strength after UV exposure of 500 h, Cold cracking resistance test, Hydrostatic Burst Pressure Test, Proof Pressure Test, Kink Test and Welded Seam Strength After UV Exposure

6789

Renewable Energy Test Centre (RTC), Murthal

9137734

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1200	GST 18% extra as per Govt. rules
Cl 7.10(0 Resistance to Internal Pressure Test)	-	500	GST 18% extra as per Govt. rules
Cl 7.9(Resistance to Impact Test)	-	300	GST 18% extra as per Govt. rules
Cl 7.8(Resistance to Thermal Shock Test)	-	500	GST 18% extra as per Govt. rules
Cl 7.7(Vacuum Performance Test)	-	1000	GST 18% extra as per Govt. rules
Cl 7.6(Average Heat Loss Coefficient Test)	-	500	GST 18% extra as per Govt. rules
Cl 7.5(Stagnation Solar Irradiation Test)	-	500	GST 18% extra as per Govt. rules
Cl 7.4(Stagnation Performance Parameter Test)	-	500	GST 18% extra as per Govt. rules
Cl 7.2.2(Uniformity)	-	500	GST 18% extra as per Govt. rules
Cl 5.1.1(Transmittance ratio ( material))	-	500	GST 18% extra as per Govt. rules
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	0	GST 18% extra as per Govt. rules
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	0	GST 18% extra as per Govt. rules
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	0	GST 18% extra as per Govt. rules
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	0	GST 18% extra as per Govt. rules
Cl 4.2 & table 1(Tube Length)	-	0	GST 18% extra as per Govt. rules
Cl 4.2 & table 1(Sealed off Part Length)	-	0	GST 18% extra as per Govt. rules
Cl 4.3(Absorber Area for Different Tube Sizes)	-	0	GST 18% extra as per Govt. rules
Cl 4.4(Solar Selective Absorbing Coating)	-	0	GST 18% extra as per Govt. rules
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	0	GST 18% extra as per Govt. rules
Cl 5.1.2(Bubble & crack (material))	-	0	GST 18% extra as per Govt. rules
Cl 5.1.3(Knots (material))	-	0	GST 18% extra as per Govt. rules
Cl 5.1.4(Solar absorbing ratio (material))	-	0	GST 18% extra as per Govt. rules
Cl 5.2.1(Scratch length and visibility)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.2(Appearance of selective coating)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.3(Colour fading area)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.4(Strut member)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.5(The inner and cover tube at the open end)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.8(Cross-section of the open end)	-	0	GST 18% extra as per Govt. rules
Cl 5.2.9(Sealed end)	-	0	GST 18% extra as per Govt. rules
Cl 9(Marking)	-	0	GST 18% extra as per Govt. rules
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	-	-
Cl 7.10(0 Resistance to Internal Pressure Test)	-	-	-
Cl 7.9(Resistance to Impact Test)	-	-	-
Cl 7.8(Resistance to Thermal Shock Test)	-	-	-
Cl 7.7(Vacuum Performance Test)	-	-	-
Cl 7.6(Average Heat Loss Coefficient Test)	-	-	-
Cl 7.5(Stagnation Solar Irradiation Test)	-	-	-
Cl 7.4(Stagnation Performance Parameter Test)	-	-	-
Cl 7.2.2(Uniformity)	-	-	-
Cl 5.1.1(Transmittance ratio ( material))	-	-	-
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	-	-
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	-	-
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	-	-
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	-	-
Cl 4.2 & table 1(Tube Length)	-	-	-
Cl 4.2 & table 1(Sealed off Part Length)	-	-	-
Cl 4.3(Absorber Area for Different Tube Sizes)	-	-	-
Cl 4.4(Solar Selective Absorbing Coating)	-	-	-
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	-	-
Cl 5.1.2(Bubble & crack (material))	-	-	-
Cl 5.1.3(Knots (material))	-	-	-
Cl 5.1.4(Solar absorbing ratio (material))	-	-	-
Cl 5.2.1(Scratch length and visibility)	-	-	-
Cl 5.2.2(Appearance of selective coating)	-	-	-
Cl 5.2.3(Colour fading area)	-	-	-
Cl 5.2.4(Strut member)	-	-	-
Cl 5.2.5(The inner and cover tube at the open end)	-	-	-
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	-	-
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	-	-
Cl 5.2.8(Cross-section of the open end)	-	-	-
Cl 5.2.9(Sealed end)	-	-	-
Cl 9(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 10.02.2025

6790

BIS, Hyderabad Branch Laboratory (HYBL)

None

IS 16089 (2013)

Jute agro-textile – Sapling bags for growth of seedling/ sapling – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4, Table 1, (i) (Mass, g/m², Min)	-
Clause 4, Table 1, (ii) (Thickness, mm)	-
Clause 4, Table 1, (iii) (Open area, percent)	-
Clause 4, Table 1, (iv) a (Threads/dm, Warp)	-
Clause 4, Table 1, (iv) b (Threads/dm, Weft)	-
Clause 4, Table 1, (v) (Width of Hessian fabric, cm)	-
Clause 4, Table 1, (vi) (Length and width of sapling bags, cm, Min)	-
Clause 4, Table 1, (vii) (Water holding capacity, percent)	-
Clause 4, Table 1, (viii) a (Tensile strength, kN/m, Warp)	-
Clause 4, Table 1, (viii) b (Tensile strength, kN/m, Weft)	-

-
complete test facility

6791

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
4(General requirement)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
15.2(Spillage Test)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
4(General requirement)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
15.2(Spillage Test)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
18(Endurance)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-

20 Jun, 2026

-
Included w.e.f.03.07.2025 Exclusion (EMI/EMC) Cl 19.11.4.1 to Cl 19.11.4.7 24(component) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

6792

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 11951 (2024)

PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER â SPECIFICATION (Second Revision)

49500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Non-Submersible Pumpset)	-	1000	-
5.1.2(Submersible Pumpset)	-	1000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	2500	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	2500	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	1000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	1000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	1000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	2500	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	2500	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	2500	-
Cl-8(GENERAL REQUIREMENTS)	-	6000	-
9.2(Tests on motor)	-	5000	-
9.3(Water Requirement)	-	1000	-
9.4.1(Reliability Tests)	-	12000	-
9.4.3(Ingress protection test)	-	5000	-
9.4.6(Dry Run Test)	-	2000	-
9.5(Routine Test)	-	5000	-
9.6(Type Test)	-	49500	-
9.7(Leakage current and electric strength at operating temperature)	-	2000	-
9.7(Moisture resistance)	-	4000	Additional 2000/- charges will be applicable for the test Cl.31 of IS 302-1.
9.7(Leakage current and electric strength)	-	2000	-

20 Jun, 2028

-
-

6793

DELHI TEST HOUSE, Azadhpur

8131406

IS 18755 (2024)

Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification

ALL

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1.1(Tensile properties)	-	1500	NA
Cl-7.1.1(Apparent Yield Strength)	-	1500	NA
Cl-7.1.1(Tensile Strength Mpa,)	-	1500	NA
Cl-7.2.1(Bond strength of Tri-Ply)	-	1500	NA
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface)	-	1500	NA
Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface)	-	1500	NA
Cl-9.1(Thickness)	-	500	NA
Cl-8.2(specimen for peel strength)	-	1500	NANA
Cl-9.2(Diameter)	-	500	NA
Cl-9.3(Flatness)	-	500	NA
Cl-10(surface finish)	-	500	NA
Cl-11(Workmanship, finish and appearance)	-	500	NA
Cl-14(Marking)	-	250	NA

17 Jun, 2027

-
Included.w.e.f.14.01.2025

6794

Central Electronics Centre, Indian Institute of Technology, Chennai

6138124

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	3000	Nil
1.7(Markings and instructions)	-	3000	nil
2.1(Protection from electric shock and energy hazards)	-	12000	nil
2.3(TNV circuits)	-	12000	nil
2.2(SELV circuits)	-	12000	nil
2.4(Limited current circuits)	-	12000	nil
2.5(Limited power sources .)	-	8000	nil
2.6(Provisions for earthing and bonding)	-	8000	Nil
2.7(Overcurrent and earth fault protection in primary circuits)	-	8000	Nil
2.8(Safety interlocks)	-	3000	Nil
2.9(Electrical insulation)	-	8000	Nil
2.10(Clearances, creepage distances and distances through insulation)	-	8000	Nil
3.1(General)	-	5000	Nil
3.2(Connection to a mains supply)	-	8000	Nil
3.3(Wiring terminals for connection of external conductors)	-	8000	Nil
3.4(Disconnection from the mains supply)	-	8000	Nil
4.1(Stability)	-	12000	Nil
4.2(Mechanical strength)	-	28000	Nil
4.3(Design and construction)	-	8000	Nil
4.4(Protection against hazardous moving parts)	-	8000	Nil
4.5(Thermal requirements)	-	24000	Nil
4.6(Openings in enclosures)	-	8000	Nil
4.7(Resistance to fire)	-	18000	Nil
5.1(Touch current and protective conductor curren)	-	12000	Nil
5.2(Electric strength)	-	28000	Nil
5.3(Abnormal operating and fault conditions)	-	28000	Nil
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	12000	Nil
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	12000	Nil
6.3(Protection of the telecommunication wiring system from overheating)	-	24000	Nil
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	12000	Nil
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	12000	Nil
7.4(Insulation between primary circuits and cable distribution systems)	-	12000	Nil
2.10.4.2(Material Group and Comparative Tracking Index)	-	12000	Nil
2.10.5.3(Insulating Compound as Solid Insulation)	-	12000	Nil
2.10.5.4(Opto-coupler)	-	8000	Nil
2.10.5.6(Thin sheet materials)	-	8000	Nil
2.10.5.11(SMPS Transformer and Inductor)	-	12000	Nil
2.10.5.12(Wires in wound components)	-	3000	Nil
2.10.5.13(Winding wire)	-	3000	Nil
2.10.5.14(Additional insulation in wound components)	-	8000	Nil
2.10.6(PCB material)	-	12000	Nil
2.10.8.2(Thermal conditioning (thermal ageing))	-	18000	Nil
2.10.8.4(Abrasion resistance test)	-	18000	Nil
2.10.9(Thermal Cycling)	-	24000	Nil
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	18000	Nil
2.10.11(Tests for semiconductor devices and for cemented joints)	-	18000	Nil
2.10.12(Enclosed and sealed parts)	-	28000	Nil
3.1.4(Internal wire)	-	24000	Nil
3.2.4(Appliance inlet /connector)	-	24000	Nil
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	24000	Nil
4.3.8(Batteries)	-	28000	Nil
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	28000	Nil
4.3.13.5(LED, laser class)	-	12000	Nil
Annex U(Insulating winding wires for use without interleaved insulation)	-	24000	Nil
Annex K(Thermal Control)	-	18000	Nil
Annex Q(Voltage Dependent Resistors)	-	18000	Nil
Annex C(Transformers)	-	12000	Nil
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	8000	Nil
Annex EE(Household and home/ office document/ media shredders)	-	8000	Nil

31 Dec, 2026

-
-

6795

Central Electronics Centre, Indian Institute of Technology, Chennai

6138124

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	NIL
6(Hazardous radiations)	-	8000	facilities not avaliable
7(Heating under normal operating conditions)	-	18000	NIL
8(Constructional requirements with regard to the protection against electric shock)	-	24000	NIL
9(Electric shock hazard under normal operating conditions)	-	12000	NIL
10(Insulation requirements)	-	28000	NIL
11(Fault conditions)	-	12000	NIL
12(Mechanical strength)	-	28000	NIL
13(CLEARANCES and CREEPAGE DISTANCES)	-	8000	NIL
14(Components)	-	12000	NIL
15(TERMINALS)	-	12000	NIL
16(External flexible cords)	-	12000	NIL
17(Electrical connections and mechanical fixings)	-	8000	NIL
19(Stability and mechanical hazards)	-	8000	NIL
20(Resistance to fire)	-	18000	NIL
6.1(Ionizing radiation)	-	8000	facility not available
6.2(Laser Radiation)	-	8000	facility not available
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	3000	NIL
8.16(Wound Component)	-	3000	NIL
14(Components)	-	12000	NIL
15(Internal wires and power cords)	-	8000	NIL
16.3b(Cord Bending Test)	-	3000	NIL
20.2.4(Printed Boards)	-	8000	NIL
4(General test conditions)	-	8000	NIL
Cl.5.1 of Cl.5(General requirements)	-	3000	NIL
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	3000	NIL
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	3000	NIL
Cl.5.2 of Cl.5(Identification and supply ratings)	-	3000	NIL
Cl.5.2 a) of Cl.5(Identification, maker)	-	3000	NIL
Cl.5.2 b) of Cl.5(Model number or type reference)	-	3000	NIL
Cl.5.2 d) of Cl.5(Nature of supply)	-	3000	NIL
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	3000	NIL
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	3000	NIL
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	3000	NIL
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	3000	NIL
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	3000	NIL
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	3000	NIL
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	3000	NIL
Cl.5.3 of Cl.5(Terminals)	-	3000	NIL
Cl.5.3a) of Cl.5(Earth terminal)	-	3000	NIL
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	3000	NIL
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	3000	NIL
Cl.5.4 of Cl.5(Caution marking)	-	3000	NIL
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	3000	NIL
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	3000	NIL
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	3000	NIL
Cl.5.5 of Cl.5(Instructions)	-	3000	NIL
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	3000	NIL
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	3000	NIL
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	3000	NIL
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	3000	NIL
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	3000	NIL
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	3000	NIL
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	3000	NIL
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	3000	NIL
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	3000	NIL
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	3000	NIL
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	3000	NIL
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	3000	NIL
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	3000	NIL
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	3000	NIL
Cl.7.1 of Cl.7(General)	-	3000	NIL
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	8000	NIL
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	8000	NIL
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	8000	NIL
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	8000	NIL
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	8000	NIL
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	8000	NIL
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	8000	NIL
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	3000	NIL
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	3000	NIL
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	24000	NIL
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	3000	NIL
Cl.8.5 of Cl.8(Class I apparatus*)	-	3000	NIL
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	3000	NIL
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	3000	NIL
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	3000	NIL
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	3000	NIL
Cl.8.6 of Cl.8(Class II apparatus)	-	3000	NIL
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	3000	NIL
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	3000	NIL
Cl.8.7 of Cl.8(Components bridging insulation)	-	3000	NIL
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	3000	NIL
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	3000	NIL
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	3000	NIL
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	3000	NIL
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	3000	NIL
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	3000	NIL
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	3000	NIL
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	3000	NIL
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	3000	NIL
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	3000	NIL
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	3000	NIL
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	3000	NIL
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	3000	NIL
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	3000	NIL
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	3000	NIL
Cl.8.11 of Cl.8(Detaching of wires)	-	3000	NIL
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	3000	NIL
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	5000	NIL
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	NIL
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	NIL
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	3000	NIL
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	3000	NIL
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	3000	NIL
Cl.8.18 of Cl.8(Disconnection from the mains)	-	3000	NIL
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	3000	NIL
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	3000	NIL
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	3000	NIL
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	3000	NIL
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	3000	NIL
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	3000	NIL
Cl.9.1 of Cl.9(Testing on the outside)	-	8000	NIL
Cl.9.1.1 of Cl.9.1(Requirements)	-	3000	NIL
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	3000	NIL
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	3000	NIL
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	3000	NIL
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	3000	NIL
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	3000	NIL
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	3000	NIL
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	3000	NIL
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	3000	NIL
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	3000	NIL
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	3000	NIL
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	3000	NIL
Cl.9.1.4 of Cl.9.1(Terminals)	-	4000	NIL
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	4000	NIL
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	4000	NIL
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	3000	NIL
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	3000	NIL
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	3000	NIL
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	3000	NIL
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	3000	NIL
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	3000	NIL
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	3000	NIL
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	3000	NIL
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	3000	NIL
Cl.9.2 of Cl.9(Removal of protective covers)	-	3000	NIL
Cl.10.2 of Cl.10(Surge Test)	-	5000	NIL
Cl.10.2 a) of Cl.10(Surge Test)	-	5000	NIL
Cl.10.2 b) of Cl.10(Surge Test)	-	5000	NIL
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	5000	NIL
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	5000	NIL
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	5000	NIL
Cl.10.3 of Cl.10(Humidity treatment)	-	28000	NIL
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	3000	NIL
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	3000	NIL
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	3000	NIL
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	3000	NIL
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	3000	NIL
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	3000	NIL
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	3000	NIL
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	3000	NIL
Cl.11.2 of Cl.11(Heating)	-	3000	NIL
Cl.11.2.1 of Cl.11.2(Requirements)	-	3000	NIL
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	3000	NIL
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	3000	NIL
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	3000	NIL
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	3000	NIL
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	3000	NIL
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	8000	NIL
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	8000	NIL
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	8000	NIL
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	8000	NIL
Cl.11.2.6 of Cl.11.2(Windings )	-	8000	NIL
Cl.11.2.7 of Cl.11.2(Printed boards)	-	8000	NIL
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	8000	NIL
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	8000	NIL
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	8000	NIL
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	3000	NIL
Cl.12.1.1 of Cl.12.1(Requirements)	-	3000	NIL
Cl.12.1.2 of Cl.12.1(Bump test )	-	3000	NIL
Cl.12.1.3 of Cl.12.1(Vibration test)	-	5000	NIL
Cl.12.1.4 of Cl.12.1(Impact test)	-	3000	NIL
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	3000	NIL
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	3000	NIL
Cl.12.1.5 of Cl.12.1(Drop test)	-	3000	NIL
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	3000	NIL
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	3000	NIL
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	3000	NIL
Cl.12.4 of Cl.12(Drawers )	-	3000	NIL
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	3000	NIL
Cl.12.5 a) of Cl.12(Endurance test,)	-	5000	NIL
Cl.12.5 b) of Cl.12(Impact test,)	-	3000	NIL
Cl.12.5 c) of Cl.12(Torque test)	-	3000	NIL
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	3000	NIL
Cl.12.6.1 of Cl.12.6(General requirements)	-	3000	NIL
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	3000	NIL
Cl.12.6.2 of Cl.12.6(Physical securement)	-	3000	NIL
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	3000	NIL
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	3000	NIL
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	3000	NIL
Cl.12.7.3 of Cl.12.7(Tests)	-	3000	NIL
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	3000	NIL
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	3000	NIL
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	3000	NIL
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	3000	NIL
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	3000	NIL
Cl.12.7.4 of Cl.12.7(Compliance)	-	3000	NIL
Cl.13.1 of Cl.13(General)	-	8000	NIL
Cl.13.2 of Cl.13(Determination of Working voltage)	-	3000	NIL
Cl.13.3 of Cl.13(Clearances)	-	8000	NIL
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	3000	NIL
Cl.13.4 a) of Cl.13(Creepage distances )	-	8000	NIL
Cl.13.4 b) of Cl.13(Creepage distances )	-	8000	NIL
Cl.13.4 c) of Cl.13(Creepage distances )	-	8000	NIL
Cl.13.6 a) of Cl.13(Jointed insulation )	-	3000	NIL
Cl.13.6 b) of Cl.13(Jointed insulation )	-	3000	NIL
Cl.13.6 c) of Cl.13(Jointed insulation )	-	3000	NIL
Cl.13.6 d) of Cl.13(Jointed insulation )	-	3000	NIL
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	3000	NIL
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	3000	NIL
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	3000	NIL
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	3000	NIL
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	3000	NIL
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	3000	NIL
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	3000	NIL
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	3000	NIL
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	3000	NIL
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	3000	NIL
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	3000	NIL
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	3000	NIL
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	3000	NIL
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	3000	NIL
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	8000	NIL
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	3000	NIL
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	3000	NIL
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	3000	NIL
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	3000	NIL
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	3000	NIL
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	3000	NIL
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	3000	NIL
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	3000	NIL
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	3000	NIL
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	3000	NIL
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	3000	NIL
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	3000	NIL
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	3000	NIL
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	3000	NIL
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	3000	NIL
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	3000	NIL
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	3000	NIL
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	3000	NIL
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	3000	NIL
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	3000	NIL
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	3000	NIL
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	3000	NIL
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	3000	NIL
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	3000	NIL
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	3000	NIL
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	3000	NIL
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	3000	NIL
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	3000	NIL
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	3000	NIL
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	3000	NIL
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	3000	NIL
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	3000	NIL
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	3000	NIL
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	3000	NIL
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	3000	NIL
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	3000	NIL
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	3000	NIL
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	3000	NIL
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	3000	NIL
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	3000	NIL
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	3000	NIL
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	3000	NIL
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	8000	NIL
Cl.19.1 of Cl.19(Stability requirements)	-	3000	NIL
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	3000	NIL
Cl.19.1 i) of Cl.19(Stability requirements)	-	3000	NIL
Cl.19.3 of Cl.19(Vertical force test )	-	3000	NIL
Cl.19.4 of Cl.19(Horizontal force test)	-	3000	NIL
Cl.19.5 of Cl.19(Test of edges and corners)	-	3000	NIL
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	3000	NIL
Cl.19.6.1 of Cl.19.6(Requirements)	-	3000	NIL
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	3000	NIL
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	3000	NIL
Cl.19.7.1 of Cl.19..7(Requirements)	-	3000	NIL
Cl.19.7.3 of Cl.19.7(Compliance)	-	3000	NIL
Cl.20.1 of Cl.20(Requirements)	-	8000	NIL
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	3000	NIL
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	3000	NIL
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	3000	NIL
Cl.20.2.2 of Cl.20.2(Electrical components )	-	3000	NIL
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	3000	NIL
Cl.20.2.4 of Cl.20.2(Printed boards)	-	8000	NIL
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	8000	NIL
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	8000	NIL
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	3000	NIL
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	3000	NIL
Cl.20.3 of Cl.20(Fire enclosure*)	-	3000	NIL
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	3000	NIL
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	3000	NIL
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	3000	NIL

31 Dec, 2026

-
-

6796

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

Class - A, AS & B

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-
11(Markings )	-	12000	-
5.1(Class of Accuracy)	-	12000	-
5.2(Types)	-	12000	-
6.1(Maximum permissible errors)	-	12000	-
8(Construction)	-	12000	-
Table 2(i) Scale length )	-	12000	-
Table 3( ii) Overall length )	-	12000	-
Table 4(iii) Distance of Zero line from top of burette )	-	12000	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	-
8.2( c) Top of burette )	-	12000	-
8.3(d) Stopcock and similar devices)	-	12000	-
8.4(e) Stop Cock Leakage)	-	12000	-
8.5( f) Delivery jet)	-	12000	-
8.6(g) Delivery time )	-	12000	-
8.6(g) Delivery time )	-	12000	-
9(Graduations, figuring and patterns )	-	12000	-
9.1(a) Graduations patterns )	-	12000	-
9.2(Position of graduation line)	-	12000	-
9.3(c) Marking of graduation lines )	-	12000	-
12(. Visibility of graduation line)	-	12000	-

26 Aug, 2027

-
Included w.e.f. 25.03.2025

6797

DELHI TEST HOUSE, Azadhpur

8131406

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	NA
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	NA
8.2, Table 3(Proof Stress, N/mm2)	-	1000	NA
8.2, Table 3(Tensile Strength, N/mm2)	-	1000	NA
8.2, Table 3(Elongation, %)	-	800	NA
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	NA
8.4(Bend Test)	-	1000	NA
8.5(Erichsen Cupping Test)	-	1000	NA
10.1(Thickness, mm)	-	250	NA
10.2(width, mm)	-	250	NA
10.3(Length, mm)	-	250	NA
10.4(Flatness,mm)	-	250	NA
10.5(Camber, mm)	-	250	NA
11(Surface Finish)	-	250	NA
Cl . 6 .0(Freedom from defect)	-	100	NA

17 Jun, 2027

-
-

6798

DELHI TEST HOUSE, Azadhpur

8131406

IS 15905 (2011)

Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(shall conform to FG 150 grade,appropriate, specified in IS 210.)	-	2500	-
5.3(Hardness )	-	1000	-
7.1(Visual Inspection and Hammer Test)	-	250	-
8.1(Crushing Strength )	-	1500	-
9.1(Hydraustatic Test)	-	2500	-
10.1(External Diameter)	-	250	-
10.2, Table 3, Sl no. I to IV(Pipe Thickness)	-	250	-
10.2 , Table 3, Sl no. I to IV(Fittings Thickness)	-	250	-
10.3(Length)	-	250	-
10.5(Masses)	-	250	-
12.1 to 12.5(Coating )	-	500	-
5.3(Hardness )	-	1000	-
7.1(Visual Inspection and Hammer Test)	-	500	-
8.1(Crushing Strength )	-	250	-
9.1(Hydraustatic Test)	-	2500	-
10.1(External Diameter)	-	250	-
10.2, Table 3, Sl no. I to IV(Pipe Thickness)	-	250	-
10.2 , Table 3, Sl no. I to IV(Fittings Thickness)	-	250	-
10.3(Length)	-	250	-
10.5(Masses)	-	250	-
11.2.5, Table 8, Sl no. I to II(a)	-	250	-
11.2.5, Table 8, Sl no. I to II(Nominal Size (DN 1))	-	100	-
11.2.5, Table 8, Sl no. I to II(b)	-	100	-
11.2.5, Table 8, Sl no. I to II(c )	-	100	-
11.2.5, Table 8, Sl no. I to II(d)	-	100	-
11.2.6, Table 9, Sl no. I to II(Nominal Size (DN ))	-	100	-
11.2.6, Table 9, Sl no. I to II(a)	-	100	-
11.2.6, Table 9, Sl no. I to II(b)	-	100	-
11.2.6, Table 9, Sl no. I to II(c)	-	100	-
11.2.6, Table 9, Sl no. I to II(r)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 1))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 2))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (L)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (a)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (b)	-	100	-
11.2.11, Table 14, (Nominal Size (DN 1))	-	100	-
11.2.11, Table 14, (Nominal Size (DN 2))	-	100	-
11.2.11, Table 14, ( L)	-	100	-
11.2.12, Table 15(Nominal Size (DN ))	-	100	-
11.2.12, Table 15(L)	-	100	-
11.2.12, Table 15(a)	-	100	-
11.2.12, Table 15(b)	-	100	-
11.2.13, Table 16(Nominal Size (DN 1))	-	100	-
11.2.13, Table 16(Nominal Size (DN 2))	-	100	-
11.2.13, Table 16(L)	-	100	-
11.2.13, Table 16(a)	-	100	-
11.2.13, Table 16(b)	-	100	-
11.2.13, Table 16(c)	-	100	-
11.2.13, Table 16(d)	-	100	-
11.2.13, Table 16(r)	-	100	-
11.2.14, Table 17,(Nominal Size (DN ))	-	100	-
11.2.14, Table 17,(a)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(r)	-	100	-
11.2.14, Table 17,(j)	-	100	-
11.2.14, Table 17,(k)	-	100	-
11.2.14, Table 17,(d)	-	100	-
11.2.15, Table 18,(Nominal Size (DN 1))	-	100	-
11.2.15, Table 18,(Nominal Size (DN 2))	-	100	-
11.2.15, Table 18,(L)	-	100	-
11.2.15, Table 18,(a)	-	100	-
11.2.15, Table 18,(b)	-	100	-
11.2.15, Table 18,(c)	-	100	-
11.2.15, Table 18,(d)	-	100	-
11.2.15, Table 18,(e )	-	100	-
11.2.15, Table 18,(f )	-	100	-
11.2.15, Table 18,(g)	-	100	-
11.2.16, Table 19, (Nominal Size (DN 1))	-	100	-
11.2.16, Table 19, (Nominal Size (DN 2))	-	100	-
11.2.16, Table 19, (L)	-	100	-
11.2.16, Table 19, (a)	-	100	-
11.2.16, Table 19, (b)	-	100	-
11.2.16, Table 19, (c)	-	100	-
11.2.16, Table 19, (d)	-	100	-
11.2.17, Table 20, (Nominal Size (DN 1))	-	100	-
11.2.17, Table 20, (Nominal Size (DN 2))	-	100	-
11.2.17, Table 20, (L)	-	100	-
11.2.17, Table 20, (a)	-	100	-
11.2.17, Table 20, (b)	-	100	-
11.2.17, Table 20, (c)	-	100	-
11.2.17, Table 20, (d)	-	100	-
11.2.18, Table 21, (Nominal Size (DN ))	-	100	-
11.2.18, Table 21, (L)	-	100	-
11.2.18, Table 21, (a)	-	100	-
11.2.18, Table 21, (b)	-	100	-
11.2.19, Table 22, (Nominal Size (DN ))	-	100	-
11.2.19, Table 22, (L)	-	100	-
11.2.19, Table 22, (c)	-	100	-
11.2.19, Table 22, (d)	-	100	-
Cl. A-1, Table 23, (Nominal Size (DN ))	-	100	-
Cl. A-1, Table 23, (Outside Dia (D))	-	100	-
Cl. A-1, Table 23, (Thickness (I))	-	100	-
Cl. A-1, Table 23, (Height (H))	-	100	-
Cl. A-2, Table 24, (Nominal Size (DN ))	-	100	-

17 Jun, 2027

-
-

6799

DELHI TEST HOUSE, Azadhpur

8131406

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	-
9.5(Tensile Strength IS 12235(Part 13))	-	1500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	-
9.3(Density IS 12235 (Part 14))	-	1000	-
9.2(Internal Diameter)	-	500	-
9.1( Visual Appearance)	-	250	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	-
8.4(Sealing rings - Hardness)	-	500	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	250	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	250	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	-
7.3.2(Rib height)	-	250	-
7.3.1(No.of Ribs)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	250	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	500	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	500	-
5(COLOUR)	-	250	-
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	1000	-
8.4(Width b)	-	250	-
8.3.1 & 8.3.2 (Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A) Outside diameter d1(+0, -0.3) d2 d3 D1 (+0.3, -0) D2 D4 D5 (+0.3, -0) Z h3 (+0, -0.1) H4 (+0, -0.1) )	-	250	-
8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN) Number of threads in 25.4mm Pitch (P) Height of thread (h) Major (Gauge Diameter) d Pitch(d2) Minor (d1) External Thread gauge length Nominal No. of turns of thread max min )	-	250	-
7.5.1 7.5.2 (Slot Dimension (Table 10) Fig 2A & 2B a. Minimum number of slot on the circumference b. Σa±5% c. Mean value of approximate free passage area (%) for width of slot (w) d. Tolerance on width of slot (w) e. Width of material between slot (b))	-	250	-
5.0(Colour of Pipes)	-	250	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	5500	--
4.1.2(K-Value as per IS-4669)	-	1500	-
4.1.1 (VCM Content as per IS 10151 (Annex A))	-	1000	-
7.1(Screen Pipes)	-	250	-
7.2(Link Twisted (Cross chain))	-	500	-

17 Jun, 2027

-
-

6800

DELHI TEST HOUSE, Azadhpur

8131406

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Lining - IS 444)	-	100	NA
5(Reinforcement - IS 444)	-	100	NA
5(Cover - IS 444)	-	100	NA
5(Lining and Cover - IS 444)	-	100	NA
6.1- Table 1(Internal diameters - ISO 4671)	-	250	NA
6.2(Concentricity - ISO 4671)	-	250	NA
6.3(Length -IS 4671)	-	250	NA
6.4( thickness of the lining plus cover - ISO 4671)	-	250	NA
6.4(If the cover is fluted, the depth of the flutes - ISO 4671)	-	250	NA
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	1000	NA
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	1000	NA
7.1 - Table 2(elongation at break of Lining - ISO 37)	-	500	NA
7.1 - Table 2(elongation at break of Cover - ISO 37)	-	500	NA
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	1000	NA
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	1000	NA
7.1 - Table 2(Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-	500	NA
7.1 - Table 2(Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-	500	NA
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	2500	NA
7.2 - Table 3(Change in length at proof pressure - ISO 1402)	-	1250	NA
7.2 - Table 3(Minimum burst pressure - ISO 1402)	-	1250	NA
7.2 - Table 3(Adhesion between components - ISO 8033)	-	1000	NA
7.2 - Table 3(Ozone resistance - ISO 7326)	-	2500	NA
7.2 - Table 3(Flexibility at 23 °C - Method A of ISO 1746)	-	500	NA
7.2 - Table 3(Low-temperature flexibility - Method B of ISO 4672)	-	500	NA

17 Jun, 2027

-
-

6801

DELHI TEST HOUSE, Azadhpur

8131406

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

35400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
6.2.1(6.1.1 Identification Stripes)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
7.2(Length)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	15000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.2(Longitudinal Reversion Test)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.3(Carbon black)	-	2500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.4( Melt Flow Rate)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.5 (Oxidation Induction Time)	-	4000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.6(Overall migration)	-	3500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.7(Density)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.8(Tensile Strength for Butt-fusion)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.9 table-6(Elongation at Break)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.10(Slow Crack Growth Rate)	-	3500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.2(Polyethylene Resin)	-	8000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(c)(Carbon Black Master Batch)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(d)(Carbon Black Master Batch)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.4(Anti oxydent)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(b)(Carbon Black Master Batch)	-	2000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(e)(Carbon Black Master Batch)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
7.4.1.2(Ovality)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(b)(Carbon Black Master Batch)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3 (a)(Carbon Black Master Batch)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.2(Density)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.2(Volatile matter Content)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.3(Toluene Extract)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Clause 7.1(Visual Apperance)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Clause 8.3(Carbon Black content)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Clause 8.3(Carbon Black Dispersion)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Clause 8.6(Overall migration (stimulate))	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Clause 8.6(Overall migration (surface of material))	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
7.1(Visual Appearance)	-	250	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl. 8.3(Carbon Black Content)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl. 8.3(Carbon Black Dispersion)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.7(Density-IS 7328:2020)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.7(Corrected Density- IS 7328:2020)	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl 8.3(Carbon Black Content)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/
Cl 8.3(Carbon Black Dispersion)	-	1500	For DN 10mm - 400mm= Rs. 36500/- For DN 401mm - 630mm= Rs. 42500/-

17 Jun, 2027

-
-

6802

DELHI TEST HOUSE, Azadhpur

8131406

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.3.1(Adhesion )	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.2(Impact Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.4(Load Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.5(Scratch Resistance)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.7(Dry Film Thickness)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 9.1(Workmanship)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.1(Corrosion Test)	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.2(Humidity Test)	-	4500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 11(Length, Width & Thickness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.1(Adhesion )	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 8.3.2(Impact Resistance)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.2(Humidity Test)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 11(Length, Width & Thickness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
8.6(Solvent Resistance test)	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
9.2(colour)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
9.3(Gloss (60 Deg))	-	1000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
Cl 10.1(Corrosion Test)	-	15	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
10.1(IS 9844)	-	15	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
7 & 7.3(ISO 2808)	-	2000	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra
11.0(Thickness)	-	500	Rs.25500/-, FOR - Corrosive resistance test @15/- per hour extra, Humidity resistance test @Rs.15/- per hour extra

17 Jun, 2027

-
-

6803

DELHI TEST HOUSE, Azadhpur

8131406

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl 7(Workmanship)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 6(Outer Diameter, Thickness & Mass)	-	1500	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1500	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	-
5 AND AS PER IS 10748(CARBON)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
Clause - 5.1, Table-3(SILICON)	-	500	-
Clause - 5.1, Table-3(NITROGEN)	-	2000	-
Clause - 5.1, Table-3(MANGANESE)	-	500	-
Clause - 5.1, Table-3(SULPHUR)	-	500	-
Clause - 5.1, Table-3( CARBON)	-	500	-
9(Straightness)	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	1000	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	1000	-
Clause 11.2, Table -2(Yield Strength)	-	1000	-
Cl 13(Workmanship)	-	200	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 6(Outer Diameter, Thickness & Mass)	-	1500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	1500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	1500	-
13.0(Oiling and Painting - Visual)	-	500	-

17 Jun, 2027

-
-

6804

DELHI TEST HOUSE, Azadhpur

8131406

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	250	NA
4(Size of fitting)	-	250	NA
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	NA
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	250	NA
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	250	NA
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	250	NA
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	1000	NA
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	2000	NA
8(Marking)	-	250	NA
6.3(Effect on water test)	-	5500	NA

17 Jun, 2027

-
-

6805

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 2618 (2016)

Laboratory glassware - Test tubes (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	0	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	0	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	0	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	10000	-
Cl. No. 6("Marking ")	-	10000	-
Cl. No. 4, Table no. 1(i)("Water resistance ")	-	0	-
Cl. No. 4, Table no. 1(ii)(Acid resistance)	-	0	-
Cl. No. 4, Table no. 1(ii)(Alkali resistance)	-	0	-
Cl. No. 5, Table no.2 to 4(Construction and dimensions)	-	10000	-
Cl. No. 6("Marking ")	-	10000	-

26 Aug, 2027

-
Included w.e.f.13.02.2025

6806

Aaditech Test and Calibration Lab LLP

8179926

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

ELECTRICAL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.1(Marking )	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.1(Marking )	-	1000	-
9.1 (a)(Marking )	-	1000	-
9.1 (b)(Marking )	-	1000	-
9.1 (c)(Marking )	-	1000	-
9.1 (d)(Marking )	-	1000	-
9.1 (e)(Marking )	-	1000	-
9.1 (f)(Marking )	-	1000	-
9.2(Marking )	-	1000	-
6.1(Design and General Construction)	-	1000	-
6.2(Design and General Construction)	-	1000	-
6.3(Design and General Construction)	-	1000	-
6.5(Design and General Construction)	-	1000	-
6.6(Design and General Construction)	-	1000	-
9.5.1 , 7.3(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (a)(Temperature Rise )	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	1000	-
9.5.3(High Voltage Test)	-	1000	-
9.5.5(Earthing Connection)	-	1000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	1000	-
7.6(General and safety requirements)	-	1000	-
7.7(Voltage drop)	-	1000	-
8.1(Performance)	-	1000	-
8.2(Performance)	-	1000	-
8.3(Performance)	-	1000	-
9.5.7, 9.5.4(Moisture Resistance )	-	1000	-
7.4.1(Mechanical strength )	-	1000	-
7.4.1(a)(Mechanical strength )	-	1000	-
7.4.1(b)(Mechanical strength )	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	1000	-
9.5.10( Electrical Endurance Test)	-	1000	-
9.5.11.2(Environmental Tests)	-	1000	-
9.5.11.3(Environmental Tests)	-	1000	-
9.5.11.4(Environmental Tests)	-	1000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.12.1(Resistance to Abnormal Heat and to Fire)	-	1000	-
9.5.13(Resistance to Rusting )	-	1000	-
9.5.14(Checking of Dimensions)	-	1000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	1000	-
9.5.1 , 7.3 (b)(Temperature Rise)	-	1000	-
7.1, 7.5.4(Insulation Resistance)	-	1000	-

-
Included w.e.f 03.02.2025

6807

National Test House (WR) - NTH, Mumbai

7107604

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	500	-
6(Standard ratings)	-	500	-
7(Classification)	-	500	-
8(Marking)	-	1000	-
9(Dimensions)	-	1500	-
10(Protection against electric shock)	-	500	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	500	-
13(Construction)	-	1000	-
14(Switched lampholders)	-	1000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	2500	-
16(Mechanical strength)	-	500	-
17(Screws, current-carrying parts and connections)	-	500	-
18(Creepage distances and clearances)	-	500	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	1000	-
12.4(Thermal tests)	-	1000	-
9.1(Lampholder dimensions)	-	1000	-
11.2(Terminals)	-	1000	-
12.3(Provision for earthing)	-	500	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	1000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	1000	-
16.7(Mechanical strength)	-	500	-
16.8(Mechanical strength)	-	500	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-

24 Jul, 2025

-
Included.w.e.f.13.01.2025

6808

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 16646 (2017)

Transportable refillable fully wrapped composite cylinders for liquefied petroleum gas (LPG) - Specification

Composite cylinders

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Symbols and unit)	-	300	-
5(General)	-	300	-
6.1(General)	-	300	-
6.2(Liner Material)	-	0	-
6.3(Composite Materials)	-	0	-
7.1(General)	-	300	-
7.4(Liners)	-	0	-
7.5(Composite Overwrap)	-	0	-
7.6(Design Submission)	-	0	-
8.1(General)	-	0	-
8.2(Prototype Testing of Cylinder Design)	-	0	-
8.3(New Design)	-	0	-
8.4(Design Variant)	-	0	-
9.1(Liner Material Test)	-	0	-
9.2(Composite material test)	-	0	-
9.4(Hydraulic Proof Test)	-	2500	-
9.6(Cylinder Burst Test)	-	4500	-
9.7(Ambient Pressure Cycle Test)	-	2000	-
9.12(Drop Test)	-	2500	-
9.17(Leak Test)	-	2000	-
9.19(Leakage Test with Service Valve)	-	1000	-
9.23(Verticality)	-	500	-
10.1(Liner Batch Test and Inspection)	-	2000	-
10.2(Composite Material Batch Test and Inspection)	-	0	-
10.3(Testing and Inspection of Cylinder)	-	0	-
12(Marking)	-	500	-
4(Symbols and unit)	-	0	-
5(General)	-	0	-
6.1(General)	-	0	-
6.2(Liner Material)	-	0	-
6.3(Composite Materials)	-	0	-
7.1(General)	-	0	-
7.4(Liners)	-	0	-
7.5(Composite Overwrap)	-	0	-
7.6(Design Submission)	-	0	-
8.1(General)	-	0	-
8.2(Prototype Testing of Cylinder Design)	-	0	-
8.3(New Design)	-	0	-
8.4(Design Variant)	-	0	-
9.1(Liner Material Test)	-	0	-
9.2(Composite material test)	-	0	-
9.4(Hydraulic Proof Test)	-	0	-
9.6(Cylinder Burst Test)	-	0	-
9.7(Ambient Pressure Cycle Test)	-	0	-
9.12(Drop Test)	-	0	-
9.17(Leak Test)	-	0	-
9.19(Leakage Test with Service Valve)	-	0	-
9.23(Verticality)	-	0	-
10.1(Liner Batch Test and Inspection)	-	0	-
10.2(Composite Material Batch Test and Inspection)	-	0	-
10.3(Testing and Inspection of Cylinder)	-	0	-
12(Marking)	-	0	-
9.3(Liner Burst Test)	-	2000	-
9.5(Resin Shear Test)	-	2000	-
9.8(Vacuum Test)	-	1000	-
9.9(Environmental Cycle Test)	-	2000	-
9.10(Stress Rupture Test)	-	2000	-
9.11(Flaw Test)	-	1000	-
9.13(High Velocity Impact Test)	-	800	-
9.14(Fire Resistance Test)	-	500	-
9.15(Permeability Test)	-	1000	-
9.16(Torque Test)	-	500	-
9.18(Pneumatic Cycle Test)	-	2000	-
9.20(Spike Test)	-	1000	-
9.21(Lifting Test)	-	1000	-
9.22(Straightness)	-	500	-
4(Symbols and unit)	-	0	-
5(General)	-	0	-
6.1(General)	-	0	-
6.2(Liner Material)	-	0	-
6.3(Composite Materials)	-	0	-
7.1(General)	-	0	-
7.4(Liners)	-	0	-
7.5(Composite Overwrap)	-	0	-
7.6(Design Submission)	-	0	-
8.1(General)	-	0	-
8.2(Prototype Testing of Cylinder Design)	-	0	-
8.3(New Design)	-	0	-
8.4(Design Variant)	-	0	-
9.1(Liner Material Test)	-	0	-
9.2(Composite material test)	-	0	-
9.4(Hydraulic Proof Test)	-	0	-
9.6(Cylinder Burst Test)	-	0	-
9.7(Ambient Pressure Cycle Test)	-	0	-
9.12(Drop Test)	-	0	-
9.17(Leak Test)	-	0	-
9.19(Leakage Test with Service Valve)	-	0	-
9.23(Verticality)	-	0	-
10.1(Liner Batch Test and Inspection)	-	0	-
10.2(Composite Material Batch Test and Inspection)	-	0	-
10.3(Testing and Inspection of Cylinder)	-	0	-
12(Marking)	-	0	-
9.3(Liner Burst Test)	-	0	-
9.5(Resin Shear Test)	-	0	-
9.8(Vacuum Test)	-	0	-
9.9(Environmental Cycle Test)	-	0	-
9.10(Stress Rupture Test)	-	0	-
9.11(Flaw Test)	-	0	-
9.13(High Velocity Impact Test)	-	0	-
9.14(Fire Resistance Test)	-	0	-
9.15(Permeability Test)	-	0	-
9.16(Torque Test)	-	0	-
9.18(Pneumatic Cycle Test)	-	0	-
9.20(Spike Test)	-	0	-
9.21(Lifting Test)	-	0	-
9.22(Straightness)	-	0	-
4(Symbols and unit)	-	0	-
5(General)	-	0	-
6.1(General)	-	0	-
6.2(Liner Material)	-	0	-
6.3(Composite Materials)	-	0	-
7.1(General)	-	0	-
7.4(Liners)	-	0	-
7.5(Composite Overwrap)	-	0	-
7.6(Design Submission)	-	0	-
8.1(General)	-	0	-
8.2(Prototype Testing of Cylinder Design)	-	0	-
8.3(New Design)	-	0	-
8.4(Design Variant)	-	0	-
9.1(Liner Material Test)	-	0	-
9.2(Composite material test)	-	0	-
9.4(Hydraulic Proof Test)	-	0	-
9.6(Cylinder Burst Test)	-	0	-
9.7(Ambient Pressure Cycle Test)	-	0	-
9.12(Drop Test)	-	0	-
9.17(Leak Test)	-	0	-
9.19(Leakage Test with Service Valve)	-	0	-
9.23(Verticality)	-	0	-
10.1(Liner Batch Test and Inspection)	-	0	-
10.2(Composite Material Batch Test and Inspection)	-	0	-
10.3(Testing and Inspection of Cylinder)	-	0	-
12(Marking)	-	0	-
9.3(Liner Burst Test)	-	0	-
9.5(Resin Shear Test)	-	0	-
9.8(Vacuum Test)	-	0	-
9.9(Environmental Cycle Test)	-	0	-
9.10(Stress Rupture Test)	-	0	-
9.13(High Velocity Impact Test)	-	0	-
9.14(Fire Resistance Test)	-	0	-
9.15(Permeability Test)	-	0	-
9.16(Torque Test)	-	0	-
9.18(Pneumatic Cycle Test)	-	0	-
9.20(Spike Test)	-	0	-
9.21(Lifting Test)	-	0	-
9.22(Straightness)	-	0	-
9.11(Flaw Test)	-	0	-

-
Included w.e.f. 22.01.2026

6809

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	500	Complete Test Charges - Rs 11,000 + GST [Except Cl.7.6-Phthalates]; Complete Test Charges - Rs 15,000 + GST [Including Cl.7.6-Phthalates]; All Prices are Except Cl.7.4 - Biocompatibility Evaluation-Cytotoxicity, Irritation and Skin Sensitization & Cl.7.5
3.2(Absorbent Core)	-	500	NA
3.3(Barrier or Bottom Sheet)	-	200	NA
4.1 (1)(Type and shapes of sanitary napkins)	-	200	NA
4.2(Sanitary napkins shape & design)	-	200	NA
Cl 5(SIZES, Regular )	-	125	Except Cl.7.4-Biocompatibility Evaluation-Cytotoxicity, Irritation and Skin Sensitization. Cl.7.5-Biodegradibility and Compost ability (Optional)
Cl 5(SIZES, Large)	-	125	NA
Cl 5(SIZES, Extra Large)	-	125	NA
Cl 5(Absorbent Capacity, Regular )	-	0	NA
Cl 5(Absorbent Capacity, Large)	-	0	NA
Cl 5(Absorbent Capacity, Extra Large)	-	0	NA
Cl 5(Absorbent Capacity, XXL)	-	0	NA
Cl 5(SIZES, Regular )	-	0	-
Cl 5(SIZES, Large)	-	0	-
Cl 5(SIZES, Extra Large)	-	0	-
Cl 5(SIZES, XXL)	-	125	-
Cl 5(Absorbent Capacity, Regular )	-	0	-
Cl 5(Absorbent Capacity, Large)	-	0	-
Cl 5(Absorbent Capacity, Extra Large)	-	0	-
Cl 5(Absorbent Capacity, XXL)	-	0	-
6.0(Manufacture, workmanship & finish)	-	400	NA
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	600	NA
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	5000	NA
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	2500	-
7.6(Pthalate test)	-	4000	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	400	NA

-
Cl 7.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization), Cl 7.5 (Biodegradability and Compostability (Optional)

6810

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 7404 : Part 1 (1991)

Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-

31 Dec, 2026

-
Included.w.e.f.15.01.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number