BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11228 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

661

ELCA Laboratories

IS/IEC 60079 : PART 0 (2017)

Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )

201000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
26.4.2(Observation)	-	3000	per sample
26.4.3(Observation)	-	1500	per sample
26.4.5(Observation)	-	12500	Up to 10 lit 7000.00 10 to 20 lit 9000.00 above 20 lit 12,500.00
26.5.1(Voltage, Current, Power, Torque, Speed, Temperature)	-	15000	Clause 26.5.1 Thermal Test Clause no 26.5.1.2 Service Temperature=7500.00 Clause no 26.5.1.3 Maximum Surface Temperature=7500.00.
26.5.2(Observation)	-	2500.00	per sample
26.6(Torque)	-	2000	per sample
26.8(Temperature)	-	95000	per sample
26.9(Temperature)	-	95000	per sample
26.12(Resistance)	-	25000	per sample
26.13(Insulation resitance)	-	15000	per sample
26.14(Capacitance)	-	2500	per sample
26.15(Power, Current, Speed)	-	15000	per sample
26.16(Dimension)	-	25000	per sample
A.3.1, A.3.2(Observation)	-	6000	per sample
A.3.3(Observation)	-	3000	per sample
A.3.4(Observation)	-	12500	per sample

02 Feb, 2028

-
-

662

ELECTRONICS TEST AND DEVELOPMENT CENTRE BANGALURU(SAFETY LAB))

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	6000	Parameter Charges
1.6(Power interface .)	-	3000	Parameter Charges
1.7(Markings and instructions)	-	6000	Parameter Charges
2.1(Protection from electric shock and energy hazards)	-	30000	Parameter Charges
2.2(SELV circuits)	-	9000	Parameter Charges
2.3(TNV circuits)	-	12000	Parameter Charges
2.4(Limited current circuits)	-	3000	Parameter Charges
2.5(Limited power sources .)	-	3000	Parameter Charges
2.6(Provisions for earthing and bonding)	-	6000	Parameter Charges
2.7(Overcurrent and earth fault protection in primary circuits)	-	6000	Parameter Charges
2.8(Safety interlocks)	-	6000	Parameter Charges
2.9(Electrical insulation)	-	34000	Parameter Charges
2.10(Clearances, creepage distances and distances through insulation)	-	49000	Parameter Charges
3.1(General)	-	20500	Parameter Charges
3.2(Connection to a mains supply)	-	15000	Parameter Charges
3.3(Wiring terminals for connection of external conductors)	-	14500	Parameter Charges
3.4(Disconnection from the mains supply)	-	3000	Parameter Charges
3.5(Interconnection of equipment)	-	3000	Parameter Charges
4.1(Stability)	-	3000	Parameter Charges
4.2(Mechanical strength)	-	24500	Parameter Charges
4.3(Design and construction)	-	18000	Parameter Charges
4.4(Protection against hazardous moving parts)	-	6000	Parameter Charges
4.5(Thermal requirements)	-	16300	Parameter Charges
4.6(Openings in enclosures)	-	6000	Parameter Charges
4.7(Resistance to fire)	-	18000	Parameter Charges
5.1(Touch current and protective conductor curren)	-	6000	Parameter Charges
5.2(Electric strength)	-	3000	Parameter Charges
5.3(Abnormal operating and fault conditions)	-	29500	Parameter Charges
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	Parameter Charges
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	Parameter Charges
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	6000	Parameter Charges
2.8.2/2.8.5(Interlock switches)	-	0	Parameter Charges
2.8.7(Switches and Relay)	-	0	Parameter Charges
2.10.4.2(Material Group and Comparative Tracking Index)	-	8000	Parameter Charges
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	Parameter Charges
2.10.5.4(Opto-coupler)	-	0	Parameter Charges
2.10.5.11(SMPS Transformer and Inductor)	-	3000	Parameter Charges
2.10.5.12(Wires in wound components)	-	0	Parameter Charges
2.10.5.13(Winding wire)	-	0	Parameter Charges
2.10.6(PCB material)	-	0	Parameter Charges
2.10.8.2(Thermal conditioning (thermal ageing))	-	37000	Parameter Charges
2.10.8.4(Abrasion resistance test)	-	3000	Parameter Charges
3.1.4(Internal wire)	-	3000	Parameter Charges
3.2.4(Appliance inlet /connector)	-	3000	Parameter Charges
4.3.8(Batteries)	-	0	Parameter Charges
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	0	Parameter Charges
4.3.13.5(LED, laser class)	-	0	Parameter Charges
Annex Q(Voltage Dependent Resistors)	-	0	Parameter Charges
Annex B(Motor tests under abnormal conditions)	-	11500	Parameter Charges
Annex C(Transformers)	-	6000	Parameter Charges
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	3000	Parameter Charges

31 Dec, 2026

-
-

663

ELECTRONICS TEST AND DEVELOPMENT CENTRE BANGALURU(SAFETY LAB))

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	Classification of Equipment only
7(Marking and instructions)	-	3000	Test Parameter
8(Protection against live parts)	-	9000	Test Parameters
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	statement/ observation only
10(POWER INPUT AND CURRENT)	-	3000	Test Parameter
11(HEATING)	-	26000	Test Parameters
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	6000	Test Parameters
15(HUMIDITY TREATMENT TEST)	-	15500	Test Parameters
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	6000	Test Parameters
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	6000	Test Parameters
18(ENDURANCE)	-	72000	Test Parameter
19(ABNORMAL OPERATION)	-	48500	Test Parameters
20(STABILITY AND MECHANICAL HAZARDS)	-	9000	Test Parameters
21(MECHANICAL STRENGTH)	-	15000	Test Parameters
22(CONSTRUCTION)	-	26000	Test Parameters
23(INTERNAL WIRING)	-	13500	Test Parameters
24(COMPONENTS)	-	3000	Test Parameters
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	15000	Test Parameters
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	6000	Test Parameters
27(PROVISION FOR EARTHING)	-	3000	Test Parameter
28(SCREWS AND CONNECTIONS)	-	3000	Test Parameter
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	20000	Test Parameters
30(RESISTANCE TO HEAT AND FIRE)	-	17800	Test Parameters
31(RESISTANCE TO RUSTING)	-	3000	Test Parameter
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3000	Test Parameter

31 Dec, 2026

-
Exclusion: Cl-19.11.4.2 (Radiated Fields), Cl-19.11.4.4 (Surge Immunity test)

664

ELECTRONICS TEST AND DEVELOPMENT CENTRE BANGALURU(SAFETY LAB))

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

78000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	Parameter charges
6(Hazardous radiations)	-	3000	Parameter charges
7(Heating under normal operating conditions)	-	11500	Parameter charges
8(Constructional requirements with regard to the protection against electric shock)	-	282500	Parameter charges for total clause.
9(Electric shock hazard under normal operating conditions)	-	19500	Parameter charges
10(Insulation requirements)	-	36000	Parameter charges
11(Fault conditions)	-	29500	Parameter charges
12(Mechanical strength)	-	78100	Parameter charges
13(CLEARANCES and CREEPAGE DISTANCES)	-	12000	Parameter charges
14(Components)	-	3000	Parameter charges
15(TERMINALS)	-	20300	Parameter charges
16(External flexible cords)	-	15000	Parameter charges
17(Electrical connections and mechanical fixings)	-	6000	Parameter charges
19(Stability and mechanical hazards)	-	19800	Parameter charges
20(Resistance to fire)	-	18000	Parameter charges
6.1(Ionizing radiation)	-	3000	Parameter charges
6.2(Laser Radiation)	-	0	Document verification
6.3()	-	0	Document Verification
16.3b(Cord Bending Test)	-	15000	Parameter charges
20.2.4(Printed Boards)	-	0	Document verification

31 Dec, 2026

-
-

665

BIS Patna Branch Laboratory (PBL)

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.2 (Adhesive)	-
Cl-6.1 (Dimensions (length))	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.2 (Adhesion of Plies)	-
Cl-9.5.2 (Water Resistance Test)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.3 (Moisture Content)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-

-
-

666

BIS Patna Branch Laboratory (PBL)

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.2 (Adhesives for Bonding of Veneers)	-
Cl-7.1 (Dimensions -length)	-
Cl-10.3 (Moisture Content)	-
Cl-10.4.1 (Glue Adhesion in Dry State - Glue Shear Strength)	-
Cl-10.4.2 (Glue Adhesion in Dry State - Adhesion of Plies)	-
Cl-10.5, 10.5.1 (Resistance to Water Test)	-
Cl-10.7.1, Table-2 (Mycological Test- Glue shear strengt)	-
Cl-10.8 (Tensile Strength)	-
Cl-10.11 (Retention of Preservative)	-
Cl-10.12 (Formaldehyde Content Test)	-
Cl-7.2 (Thickness)	-
Cl-7.3 (Squareness)	-
Cl-8.1, 8.2 (Workmanship and finish)	-
Cl-10.5.1.1 (Water Resistance Test-Glue shear strength)	-
Cl-10.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-10.6 (Water resistance test (Concrete shuttering Plywood))	-
Cl-10.7.2 (Mycological Test- Adhesion of plies)	-
Cl-10.9, Table-3 (i) (Along (parallel to the grain direction of the face veneer))	-
Cl-10.9, Table-3 (ii) (Across (perpendicular to the grain direction of the face veneer))	-
Cl-10.10, Table-4 (i) a (Wet Bending Strength -Modulus of Elasticity (MOE),- Average)	-
Cl-10.10, Table-4 (i) b (Wet Bending Strength - Modulus of Elasticity (MOE),- Minimum individual)	-

-
-

667

BIS Patna Branch Laboratory (PBL)

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl. 4 (Grades)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl.5.2 (Quality Requirements of Plywood for General Purposes)	-

-
-

668

BIS Patna Branch Laboratory (PBL)

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5 ( Density, g/cc)	-
7.3 ( Opacity)	-
8.1.1, 8.1.1.2, table-3 (Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-
8.1.2, table 4 to 7 (Wall Thickness)	-
8.1.3 (Length, meter)	-
8.2 table-9 (Dimensions of Integral Socket)	-
9 /9.1 / 27 degree centigrate (MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-
9.3 table-12 ( Ring Stiffness)	-
9.4, annexure-E ( Orientation Factor)	-
10, table-13 ( PHYSICAL AND 1CHARACTERISTICS)	-
11.2 / 11.2.1 ( Short-Term Pressure Test for Leak Tightness of Assemblies)	-
11.3 ( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-
9.2, table -11 ( Resistance to External Blows at 0 °C)	-

-
-

669

BIS Patna Branch Laboratory (PBL)

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.5 (Density)	-
Cl 9.6 (Melt Flow Rate)	-
Cl 7 (Dimensions Of Pipes)	-
Cl 9.1 (Hydraulic Characteristics)	-
Cl 9.2 (Fusion Compatibility)	-
Cl 9.3 (Reversion Test )	-
Cl 9.4 & Annex B (Impact Strength)	-
Cl 9.7 (Carbon Black Content & Dispersion)	-
Cl 9.8 (Thermal Stability By Hydrostatic Pressure Testing)	-
Cl 9.9 (Opacity)	-

-
-

670

BIS Patna Branch Laboratory (PBL)

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Dimensions of fitting)	-
8.2 (Opacity)	-
8.3 (Stress Relief Test)	-
8.4 (Vicat softening Temperature)	-
8.5 (Density)	-
Cl-9.1 (Hydrostatic Characteristics)	-
Cl-9.2 (Thermal Stability by Hydrostatic Pressure Testing)	-

-
-

671

BIS Patna Branch Laboratory (PBL)

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
19 (Marking)	-
7.2 ,Table 2&3 (Socket Dimensions)	-
8 (Sealing Rings)	-
11 (Design requirements)	-
12.2 (Stress relief test)	-
12.3 (Vicat softening tempewrature)	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-
Cl.14, Annex A (Titanium Di-Oxide Content)	-
Cl.15, Annex B (Sulphated Ash Content)	-
16.1 (Impact test)	-
12.4 (Effect on water test)	-
17 (Watet tightness of joint)	-
7.1,Table 1 (Wall thickness)	-

-
-

672

BIS Patna Branch Laboratory (PBL)

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1.1, T4 (Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-
8.3 (Carbon black content- IS 2530-1963)	-
8.2 ("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-
8.4 (Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-
8.5 (Oxidation Induction Time -IS 4984:2016(Annexure-B))	-
8.6 (Density-IS 7328:2020)	-
8.7 ("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-
8.8,T5 ("Elongation -IS 4984-2016 (Annexure-H)")	-
8.9 (Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-
6 (Pipe Description - IS 14333-2022)	-
6.2 (Colour- IS 14333-2022)	-
7.1 (Visual Appearance- IS 14333-2022)	-
7.2 (Length- IS 14333-2022)	-
7.3 (Coiling- IS 14333-2022)	-
7.4,T3 of IS 4984 (Outside Diameter-IS 4984-2016)	-
7.4,T4 of IS 4984 (wall Thickness-IS 4984-2016)	-
7.4,T3 of IS 4984 (Ovality-IS 4984-2016)	-

-
-

673

DELHI TEST HOUSE, Azadhpur

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1(Febric)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.1.1(Febric)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.2(Seam)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.3(Hemming at the mouth)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.4(Freedom from defects)	-	500	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	750	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	1000	COMPLETE TESTING CHARGES- RS.-10000/-
As per Clause 4.1(Febric)	-	-	-
As per Clause 4.1.1(Febric)	-	-	-
As per Clause 4.2(Seam)	-	-	-
As per Clause 4.3(Hemming at the mouth)	-	-	-
As per Clause 4.4(Freedom from defects)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	-	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	-	-
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	-	-

-
Included w.e.f 16.04.2025

674

BLUESKY LAB LLP

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	800	-
30.0(Resistance To Heat and Fire)	-	800	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
11.0(Heating)	-	2000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1500	-
7.0(Classification)	-	1000	-
6.0(Marking and Instructions)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19.11.4.4(Surge immunity test)	-	2000	-
4(GENERAL REQUIREMENT)	-	800	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	800	-
19.11.4.4(Surge immunity test)	-	800	-

22 May, 2028

-
Included w.e.f 13.05.2025 Exclusion: Cl 19.11.4.19.11.4.7(EMI/EMC), Cl 24.0 (Components), Cl 32.0 (Radiation, Toxicity and Similar Hazards)

675

MSME TESTING CENTRE (WR), MUMBAI

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

Upto 20A, Upto 250V

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-5(General notes on tests)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-6(Rating)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-8(Marking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-9(Checking of dimensions)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.3(Requirements for Accessible Metal Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.4(Requirements for Insulation of the Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-7(Classification)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.6(Requirements for Switches Operated Indirectly)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-11(Provision for earthing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-12(Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-13(Constructional requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-14(Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.1(Resistance to Ageing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.2(Protection Provided by Enclosures of Switches)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.3(Resistance to Humidity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.1(General)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.2(Test for Measuring the Insulation Resistance)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.3(Electric Strength Test)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-17(Temperature rise)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-18(Making and breaking capacity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-19(Normal operation)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-20(Mechanical strength)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-21(Resistance to heat)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-22(Screws, current carrying parts and connections)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.1(Resistance to abnormal heat and fire)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.2(Resistance to tracking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-25(Resistance to rusting)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.1(Test for Switches Intended for Inductive Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
13.5(Attachment of knobs)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.12(Table 13)(Deflection Test Forces)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-4(General Requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-5(General notes on tests)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-6(Rating)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-8(Marking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-9(Checking of dimensions)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.3(Requirements for Accessible Metal Parts)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.4(Requirements for Insulation of the Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-7(Classification)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.6(Requirements for Switches Operated Indirectly)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-11(Provision for earthing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-12(Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-13(Constructional requirements)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-14(Mechanism)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.1(Resistance to Ageing)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.2(Protection Provided by Enclosures of Switches)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-15.3(Resistance to Humidity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.1(General)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.2(Test for Measuring the Insulation Resistance)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-16.3(Electric Strength Test)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-17(Temperature rise)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-18(Making and breaking capacity)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-19(Normal operation)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-20(Mechanical strength)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-21(Resistance to heat)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-22(Screws, current carrying parts and connections)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.1(Resistance to abnormal heat and fire)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-24.2(Resistance to tracking)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
Cl-25(Resistance to rusting)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.1(Test for Switches Intended for Inductive Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
13.5(Attachment of knobs)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A
12.3.12(Table 13)(Deflection Test Forces)	-	16000	Type test: Rs.14,000/- for Switches upto 10A. Rs. 16,000/- for Switches above 10A & upto 20A

-
Included w.e.f 07.05.2025

676

Classic Testing & Research Centre

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	5000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	5000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	5000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	5000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	5000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	5000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	5000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	5000	-
Cl. 24 302-2-32 : 1994(Components)	-	5000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	5000	-
Cl. 22 302-2-32 : 1994(Construction )	-	5000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	5000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	5000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	5000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	5000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	5000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	5000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	5000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	5000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	5000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	5000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	5000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	5000	-
Cl. 7 302-2-32 : 1994(Marking)	-	5000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	5000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-

15 Oct, 2027

-
Included w.e.f.13.05.2025 Exclusion Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.5 (Immunity to conducted discharges)

677

National Test House (NR)

IS 14490 (2024)

Plain Copier Paper â Specification (Second Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(plain copier paper)	-	500	-
5.1.2(k,)	-	500	-
5.2(0)	-	500	-
5.3(Grammage (Substance))	-	1000	-
5.4(Thickness)	-	500	-
5.5(Size)	-	1000	-
5.7(Conditioning)	-	1000	-
5.8(Additional Requirements for Eco-Mark)	-	1000	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	1000	-
5.6, Table 1, ii(Opacity, percent, Min)	-	1000	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	1000	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	1000	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	1000	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	1000	-
5.6, Table 1, vii(Taber stiffness, Min:)	-	1000	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min:)	-	1000	-
5.6, Table 1, ix(Tensile index, N.m/g, Min:)	-	1000	-
6(PACKING AND MARKING)	-	1000	-
5.1.1(plain copier paper)	-	0	-
5.1.2(k,)	-	0	-
5.2(0)	-	0	-
5.3(Grammage (Substance))	-	0	-
5.4(Thickness)	-	0	-
5.5(Size)	-	0	-
5.7(Conditioning)	-	0	-
5.8(Additional Requirements for Eco-Mark)	-	0	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	0	-
5.6, Table 1, ii(Opacity, percent, Min)	-	0	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	0	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	0	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	0	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	0	-
5.6, Table 1, vii(Taber stiffness, Min:)	-	0	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min:)	-	0	-
5.6, Table 1, ix(Tensile index, N.m/g, Min:)	-	0	-
6(PACKING AND MARKING)	-	0	-
5.1.1(plain copier paper)	-	0	-
5.1.2(k,)	-	0	-
5.2(0)	-	0	-
5.3(Grammage (Substance))	-	0.01	-
5.4(Thickness)	-	0	-
5.5(Size)	-	0	-
5.7(Conditioning)	-	0	-
5.8(Additional Requirements for Eco-Mark)	-	0	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	0	-
5.6, Table 1, ii(Opacity, percent, Min)	-	0	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	0	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	0.01	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	0	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	0	-
5.6, Table 1, vii(Taber stiffness, Min:)	-	0	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min:)	-	0	-
5.6, Table 1, ix(Tensile index, N.m/g, Min:)	-	0	-
6(PACKING AND MARKING)	-	0	-
5.1.1(plain copier paper)	-	0	-
5.1.2(k,)	-	0	-
5.2(0)	-	0	-
5.3(Grammage (Substance))	-	0	-
5.4(Thickness)	-	0	-
5.5(Size)	-	0	-
5.7(Conditioning)	-	0	-
5.8(Additional Requirements for Eco-Mark)	-	0	-
5.6, Table 1, i(ISO brightness, percent, Min)	-	0	-
5.6, Table 1, ii(Opacity, percent, Min)	-	0	-
5.6, Table 1, iii(One minute cobb test, both sides, g/m2 , Max)	-	0	-
5.6, Table 1, iv(Surface strength, Dennison (Wax Pick))	-	0	-
5.6, Table 1, v(Smoothness for both sides (Bendsten), ml/min, Max)	-	0	-
5.6, Table 1, vi(Ash content (at 900 °C), percent by mass, Max)	-	0	-
5.6, Table 1, vii(Taber stiffness, Min:)	-	0	-
5.6, Table 1, viii(Tear Index, mN.m2 /g, Min:)	-	0	-
5.6, Table 1, ix(Tensile index, N.m/g, Min:)	-	0	-
6(PACKING AND MARKING)	-	0	-

26 Oct, 2025

-
Included w.e.f.28.05.2025

678

Testtex India Laboratories Pvt. Ltd., Mumbai

IS 17786 (2022)

Medical Textiles Underpad Specification

Small, Medium, Large, Extra Large

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	Complete Testing Charges- Rs 14,000 + GST (10 % Discount to BIS for Complete Testing)
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	0	-
Clause 4.3(Absorbent Core)	-	0	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	0	-
Clause 4.5(Adhesive)	-	0	-
Clause 7.0(Washing, Drying and handling Instruction)	-	0	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	2500	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	500	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	1000	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	1000	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	5000	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	2500	-
Clause 4.2(Top Cover or Top Sheet)	-	500	-
Clause 4.3(Absorbent Core)	-	500	-
Clause 4.4(Outer Protective Barrier or Back Sheet)	-	500	-
Clause 4.5(Adhesive)	-	500	-
Clause 7.0(Washing, Drying and handling Instruction)	-	500	-
Clause 9.0(Marking)	-	0	-

08 Apr, 2028

-
Included w.e.f 26.05.2025 Exclusion: Clause 8.4 (" Biocompatibility Evaluation — Irritation and Skin Sensitization, Cytotoxicity (Optional)")

679

Arbro Pharmaceuticals Private Limited

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Commercial Grade

16350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	No Discount
4.6.2 Annex A(Transparency)	-	400	No Discount
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	300	No Discount
4.6.5(MIGRATION TEST)	-	1000	No Discount
4.6.6.b (chem)(Water Potability Test (b) Taste)	-	200	No Discount
4.2(Design, Shape & Dimension )	-	100	No Discount
4.3(Workmanship, Finish & Appearance)	-	0	No Discount
Cl. 4.4 (a)(Capacity)	-	49.98	No Discount
4.4 (b)(Brimful Capacity)	-	200	No Discount
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	200	No Discount
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	200	No Discount
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	200	No Discount
4.6.6.a (chem)(Water Potability Test (a) Odour)	-	200	No Discount
4.6.5.1.a(Colour migration Test (Container))	-	300	No Discount
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	133.33	No Discount
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	133.33	No Discount
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	133.33	No Discount
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	300	No Discount
4.6.5 (chem)(c. Colour Migration (Cap))	-	300	No Discount
4.6.1(Environmental Stress-Crack Resistance)	-	0	Not Applicable (Parameter Removed from IS 15410).
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	300	Charges applicable for container only. In case of both Cap and container testing charges are 600 Rs.
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	3600	Charges applicable for container only. In case of both Cap and container testing charges are 7200 Rs.

14 Jan, 2026

-
-

680

Institute for Auto Parts and Hand Tools Technology

IS 4432 (1988)

Specification for case hardening steels (First Revision)

All Grade/Type/Size/Designation as per IS 4432

40180 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-5)( CARBON)	-	100	-
TABLE-1 (Clause-5)(SULPHUR)	-	100	-
TABLE-1 (Clause-5)(PHOSPHURS)	-	100	-
TABLE-1 (Clause-5)(MANGANESE)	-	100	-
TABLE-1 (Clause-5)(SILICON)	-	100	-
TABLE-1 (Clause-5)( ALUMINIUM)	-	120	-
TABLE-1 (Clause-5)(Chromium)	-	120	-
TABLE-1 (Clause-5)(Molybdenum)	-	120	-
TABLE-1 (Clause-5)(NIOBIUM)	-	120	-
TABLE-1 (Clause-5)(VANADIUM)	-	120	-
TABLE-1 (Clause-5)(TITANIUM)	-	120	-
Cl. 5(Copper)	-	360	Copper = 120/- Nickle= 120/- Tin= 120/-
11(Dimensional Tolerances)	-	1200	-
4(Freedom from Defects)	-	500	-
7(Hardness)	-	400	-
8(Mechanical testing)	-	4200	-
8.4(Impact testing)	-	4000	-
9(Grain Size)	-	400	-
10(Inclusion rating)	-	400	-
14(Additional test)	-	26000	Blank Hardening- Rs. 6000/- Hot upset test -Rs. 6000/- Hardenability test- 5000/- Blue fracture test - 4500/- Microstructure- 500/- Macro etch test - 1000/- Step machined test- 1000/- MPI testing - 1000/- UT- 1000/-
TABLE-1 (Clause-5)(NITROGEN)	-	1500	-

17 Feb, 2028

-
-

681

Institute for Auto Parts and Hand Tools Technology

IS 704 (1984)

Specification for crow - Bars and claw - Bars (Second Revision)

All Grade/Type/Size/Designationasper IS704:1984 RA 2021

5440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1 to 9(Shapes And Dimensions-Width across flats )	-	1200	-
6(Hardness)	-	400	-
7(Manufacture and Finish)	-	500	-
8.1(Drop Test)	-	500	-
8.2(Static Load Test)	-	1000	-
8.3(Falling weight test)	-	500	-
5.0(Material testing)	-	0	-

17 Feb, 2028

-
-

682

ADS LABTECH

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

1100V

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	100	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	100	-
5.1(Insulation)	-	100	100
6.1(Flexibility class)	-	100	-
6.2(Compactness)	-	100	-
6.2(No of strands)	-	100	-
6.2(Surface)	-	100	-
6.3(Protective barrier)	-	100	-
6.4(size of street lighting conductor)	-	100	-
6.5(Size of messenger conductor )	-	100	-
6.6(Joints in messenger conductor )	-	100	-
6.6(Direction of outer layer)	-	100	-
7.1(Insulation)	-	100	-
7.2( Thickness of insulation)	-	200	-
7.3(Tolerance on thickness of insulation )	-	200	-
7.4(Aplication of the insulation )	-	100	-
7.5(Colour of the insulation )	-	100	-
8.1(Core identification)	-	100	-
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	100	-
9.2(Assembly (Laying up))	-	100	-
9.3(Direction of lay)	-	200	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	700	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	200	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	200	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	200	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	200	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	200	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	200	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	200	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	200	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	100	-
6.1(Number of wires (phase conductor))	-	100	-
6.1(Construction of Street Lighting conductor)	-	100	-
6.1(Number of wires (Street Lighting conductor))	-	100	-
12.1(Manufacturer's Identification)	-	100	-
12.2(Cable Identification)	-	100	-

15 May, 2027

-
Included w.e.f 13.05.2025

683

Classic Testing & Research Centre

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	5000	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	5000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	5000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	5000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	5000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	5000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	5000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	5000	-
Cl. 24 302-2-209 : 1994(Components)	-	5000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	5000	-
Cl. 22 302-2-209 : 1994(Construction )	-	5000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	5000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	5000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	5000	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	5000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	5000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	5000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	5000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	5000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	5000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	5000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	5000	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	5000	-
Cl. 7 302-2-209 : 1994(Marking)	-	5000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	5000	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	5000	-
Cl-19.11.4.1(Electrostatic discharge)	-	5000	-
Cl-19.11.4.3(Fast transient bursts)	-	5000	-
Cl-19.11.4.4(Surge Immunity test)	-	5000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	5000	-
Cl-19.11.4.7(Harmonics)	-	5000	-

15 Oct, 2027

-
Included w.e.f.13.05.2025 Exclusion Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.5 (Immunity to conducted discharge)

684

Anacon Laboratories Pvt. Ltd

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

10800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Description)	-	200.00	-
6.1.2(Film Form)	-	200.00	-
6.1.3(Winding of the Film )	-	200.00	-
6.1.4(Odour)	-	100.00	-
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	200.00	-
6.1.6(Width)	-	200.00	-
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	900.00	-
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	150.00	Cost of Tensile Strength- 300.00
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	150.00	Cost of Tensile Strength- 300.00
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	100.00	Cost of Elongation at break- 200.00
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	100.00	Cost of Elongation at break- 200.00
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	200.00	-
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	900.00	-
7.2 Annex F(Stack Load test)	-	300.00	-
7.3 Annex G(Drop test )	-	300.00	-
7.4 Annex H(Ink adhesion test for printed pouches)	-	300.00	-
7.5 Annex J(Product resistance test for printed pouches)	-	300.00	-
5(Material)	-	1200.00	-
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	4800	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	4800	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	4800.00	For metals and Phthalic acid
Table 3(ix) Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	4800.00	For metals and Phthalic acid
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	4800.00	For metals and Phthalic acid
Table 3(viii) Antimony)	-	4800.00	For metals and Phthalic acid

15 Dec, 2026

-
-

685

Anacon Laboratories Pvt. Ltd

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	1200.00	ok
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	300.00	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	300.00	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	100.00	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	400.00	Top, middle, bottom together
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	400.00	Top, middle, bottom together
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	400.00	Top, middle, bottom together
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	500.00	-
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	400.00	-
4.6.2 Annex A(Transparency)	-	400.00	-
4.4 (b)(Brimful Capacity)	-	400.00	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	900.00	-
4.6.5.1 (chem)(Colour migration (Caps))	-	900.00	-
4.6.5.1 (chem)(Colour migration (Container))	-	900.00	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	900.00	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	900.00	-
4.3(Workmanship, Finish & Appearance)	-	400.00	-
4.2(Design, Shape & Dimension )	-	200.00	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	900.00	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for container,Cobalt)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	4800.00	for metals and phthalic acid
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (i)(Barium)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (ii)(Cobalt)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (iii)(Copper)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv)(Iron)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (v)(Lithium)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (vi)(Manganese)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii)(Zinc)	-	4800.00	for metals and phthalic acid
CL 4.6.7.2 and 4.6.7.3, Table 3 (viii)(Antimony)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for container,Barium)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for container,Copper)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for container,Iron)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for container,Lithium)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for container,Manganese)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for container,Zinc)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for container,Antimony)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i)(Specific migration for Cap,Barium)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii)(Specific migration for Cap,Cobalt)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii)(Specific migration for Cap,Copper)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv)(Specific migration for Cap,Iron)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v)(Specific migration for Cap,Lithium)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi)(Specific migration for Cap,Manganese)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii)(Specific migration for Cap,Zinc)	-	4800.00	for metals and phthalic acid
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii)(Specific migration for Cap,Antimony)	-	4800.00	for metals and phthalic acid

15 Dec, 2026

-
-

686

Arbro Pharmaceuticals Private Limited

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

Commercial Grade

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Description)	-	150	No Discount
6.1.2(Film Form)	-	150	No Discount
6.1.3(Winding of the Film )	-	150	No Discount
6.1.4(Odour)	-	150	No Discount
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	150	No Discount
6.1.6(Width)	-	150	No Discount
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1000	No Discount
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1000	No Discount
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	300	No Discount
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	300	No Discount
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	300	No Discount
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	300	No Discount
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	600	No Discount
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1500	No Discount
7.2 Annex F(Stack Load test)	-	1200	No Discount
7.3 Annex G(Drop test )	-	300	No Discount
7.4 Annex H(Ink adhesion test for printed pouches)	-	150	No Discount
7.5 Annex J(Product resistance test for printed pouches)	-	150	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	300	No Discount
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	3600	No Discount
7.1(Vibration Leakage Test)	-	500	No Discount

14 Jan, 2026

-
-

687

Ahmedabad Textile Industry's Research Association

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

55900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	200	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	0	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	200	-
5.4(Fixing of Eyelets, IS 7903)	-	200	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	200	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	200	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	200	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	450	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	450	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	900	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	13860	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	800	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	13760	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	900	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1350	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	3000	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	1650	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	650	-
6.2(Length, IS 7903)	-	200	-
6.2(Width, IS 7903)	-	200	-
6.2(height, IS 7903)	-	200	-
6.3(Water Proofness,IS 7941)	-	1600	-
6.3(Water Proofness, IS 7940)	-	700	-
3.4( Line/ Cord beading IS 7903)	-	0	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	0	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	0	-
5.4(Fixing of Eyelets, IS 7903)	-	0	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	0	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	0	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	0	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	0	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	0	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	0	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	0	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	0	-
6.2(Length, IS 7903)	-	0	-
6.2(Width, IS 7903)	-	0	-
6.2(height, IS 7903)	-	0	-
6.3(Water Proofness,IS 7941)	-	0	-
6.3(Water Proofness, IS 7940)	-	0	-
6.2(dimension(l))	-	0	-
6.2(dimension(w))	-	0	-
6.2(dimension(h))	-	0	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	400	-
3.3(Eyelets)	-	0	-
3.2(HDPE Fabric (Material Identification))	-	500	-
3.1(HDPE Tapes (Carbon Black Content))	-	550	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	0	-
3.1(HDPE Tapes (Material Identification))	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
4()	-	0	-
5.1.1(Coating Thickness)	-	700	-
5.1.1(Carbon Black Content)	-	550	-
5.1.1(Sandwich lamination thickness)	-	450	-
5.1.1(Mass of Finished Tarpaulin)	-	0	-
5.1.1(UV Exposure (144 hrs))	-	0	-
5.1.1(Agening)	-	10080	-

-
Included w.e.f 26.05.2025

688

CIPET, Jaipur

IS 2833 (2019)

Aniline, technical - Specification (Second Revision)

Aniline, Technical - Specification

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	1000	Include packing and marking charges also
Cl.2.2.1(Relative Density at 27/27 0C)	-	1000	-
Cl.2.2.2(Crystallizing Point)	-	2200	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	2000	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	3200	-
Cl.2.2.3(Distillation Range)	-	2200	-
Cl.2.2.4(Assay, percent by GC)	-	3200	-
Cl.2.2.6(Moisture content, percent by mass)	-	1500	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-

21 Feb, 2026

-
Included w.e.f.03.06.2025

689

MARQUIS TECHNOLOGIES PRIVATE LIMITED

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(LED Luminaire Life)	-	15000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	15000	-
8(Light Output)	-	10000	-
7(Total Input Power)	-	15000	-

13 Dec, 2026

-
Included w.e.f 19.05.2025

690

Institute for Auto Parts and Hand Tools Technology

IS 274 : Part 1 and 2 (1981)

Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision)

All Grade/Type/Size/Designation per the IS 274 (Pt 1&2)

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur)	-	200	- S = Rs.100/- per element (As per IS 274 Part-I) - S = Rs.100/- per element (As per IS 274 Part-II)
4.1(Phosphorus)	-	200	- P = Rs.100/- per element (As per IS 274 Part-I) - P = Rs.100/- per element (As per IS 274 Part-II)
5 Table-1,2(Shape)	-	2400	Rs. 1200/- as per IS 274 (Part-I) Rs. 1200/- as per IS 274 (Part-II)
5 Table-1,2(Dimensions- A)	-	0	-
5 Table-1,2(Dimensions- B)	-	0	-
5 Table-1,2(Dimensions- C)	-	0	-
5 Table-1,2(Dimensions- D)	-	0	-
5 Table-1,2(Dimensions- E)	-	0	-
5 Table-1,2(Dimensions- G)	-	0	-
5 Table-1,2(Dimensions- H)	-	0	-
5 Table-1,2(Dimensions- K)	-	0	-
5 Table-1,2(Dimensions- L)	-	0	-
6.1(Blade thickness)	-	0	-
7.0(Mass)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
9.1(Handles)	-	0	-
9.3(Handles)	-	0	-
11.0(Workmanship & Finish )	-	1000	Rs. 500/- as per IS 274 (Part-I) Rs. 500/- as per IS 274 (Part-II)
12.0(Preservative Treatment )	-	0	-
14.2(Bending Test)	-	0	-
14.3(Flexing Test)	-	0	-
4.1(Sulphur)	-	0	-
4.1(Phosphorus)	-	0	-
5 Table-1,2(Shape)	-	0	-
5 Table-1,2(Dimensions- A)	-	0	-
5 Table-1,2(Dimensions- B)	-	0	-
5 Table-1,2(Dimensions- C)	-	0	-
5 Table-1,2(Dimensions- D)	-	0	-
5 Table-1,2(Dimensions- E)	-	0	-
5 Table-1,2(Dimensions- G)	-	0	-
5 Table-1,2(Dimensions- H)	-	0	-
5 Table-1,2(Dimensions- K)	-	0	-
5 Table-1,2(Dimensions- L)	-	0	-
6.1(Blade thickness)	-	0	-
7.0(Mass)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
9.1(Handles)	-	400	Hardness As per IS 274 (Part-II) Clause no. 9.0
9.3(Handles)	-	0	-
11.0(Workmanship & Finish )	-	500	-
12.0(Preservative Treatment )	-	0	-
14.2(Bending Test)	-	1000	Rs. 1000/- as per IS 274 (Part-I) Rs. 1000/- as per IS 274 (Part-II)
14.3(Flexing Test)	-	1000	Rs. 1000/- as per IS 274 (Part-I) Rs. 1000/- as per IS 274 (Part-II)
4.0(PHOSPHORUS)	-	0	-
4.0(SULPHUR)	-	0	-

17 Feb, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number