BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

721

Electrical Research and Development Association, gujurat

7101125

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

Up to 100 µF

478760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.9(Capacitance measurement)	-	3000	RS.
2.1(Check of dimensions)	-	720	RS.
2.14(Damping heat test)	-	12000	RS.
2.16.3(Destruction test : Test procedure)	-	30000	RS.
2.13(Endurance test)	-	380000	30,000/- for Class D, 80,000/- for Class C, 1,30,000/- for Class B, 3,80,000/- for Class A
2.5(Tangent of loss angle)	-	3000	RS.
2.12(Sealing Test)	-	1800	RS.
2.15(Self-healing test (if applicable))	-	3000	RS.
2.6(Visual Examination)	-	720	RS.
5.1(Check marking)	-	720	RS.
2.7(Voltage test between terminals)	-	1200	RS.
2.8(Voltage test between terminals and case)	-	1200	RS.
2.11.1.1(Tensile)	-	1960	RS.
2.11.1.2(Bending (half cf the terminations))	-	1960	RS.
2.11 .1.3(Torsion (other half of the terminations))	-	1960	RS.
2.11.1.4(Torque (screw terminals))	-	1960	RS.
2.11.3(Vibration)	-	25880	RS.
2.11.2(Soldering)	-	2150	RS.

30 Nov, 2028

-
-

722

Electrical Research and Development Association, gujurat

7101125

IS 8309 (1993)

Compression type tubular terminal ends for aluminium conductors of insulated cables - Specification (First Revision)

3740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Finish, IS 8309)	-	170	Complete test charges - 3740/-
5(Dimensions, IS 8309)	-	300	Complete test charges - 3740/-
8.2(Flattening Test, IS 8309)	-	630	Complete test charges - 3740/-
8.3(Electrical Conductivity Test, IS 8309)	-	340	Complete test charges - 3740/-

30 Nov, 2028

-
-

723

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

178960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Mass of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Uniformity of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.10 (elec)(Surface condition test)	-	14490	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.11 (elec)(Corona Test)	-	19200	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.12 (elec)(Radio Interference Voltage Test)	-	42000	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
10.4 (mech)(Direction of lay)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	----
13.9 (elec)(The test of galvanising)	-	1210	170/- per wire 1210/- for 7 wires
8.2.1 (elec)(Size of complete conductor)	-	125	--
8.2.2 (elec)(Resistance of complete conductor)	-	5200	--

30 Nov, 2028

-
-

724

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

73250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.1 Table-1(Dimensional measurement of wires)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.3(Direction of Lay)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.4 Table 1(Resistance of Aluminium wire)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.

30 Nov, 2028

-
-

725

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

166060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (mech)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Mass of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Uniformity of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.9 (elec)(Surface condition test)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.10 (elec)(Ultimate breaking load)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.11 (elec)(Stress-strain test)	-	48300	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.

30 Nov, 2028

-
-

726

Electrical Research and Development Association, gujurat

7101125

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

33780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load before stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load after stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.5, Table 1(Resistance test)	-	520	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.6, Table 3(Measurement of lay ratio)	-	250	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.4(Wrapping test)	-	460	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
6(Freedom from defects)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
9.3(Stranding)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm

30 Nov, 2028

-
-

727

Electrical Research and Development Association, gujurat

7101125

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

DISTRIBUTON TRANSFORMER

394926 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1012	Test charges for subsequent tap Rs. 506
14.1(MOUNTING ARRANGEMENT)	-	880	.
14.2(MOUNTING ARRANGEMENT)	-	880	.
14.3(MOUNTING ARRANGEMENT)	-	880	.
14.4(MOUNTING ARRANGEMENT)	-	880	.
21.2 a)(Measurement of winding resistance )	-	759	Test charges for subsequent tap Rs. 379
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	8250	up to 100kVA Test charges Rs. 3036/- subsequent tap - Rs. 2024/- From 101 kVA to 500 kVA - Rs. 4744/- single measurement. For subsequent tap Rs. 3163/- From 501kVA up to 2500kVA - Rs. 8250/- single measurement. For subsequent tap Rs. 5500
21.2 d)(Measurement of no-load loss and current)	-	5500	up to 100kVA Test charges Rs. 2024/- subsequent tap - Rs. 1012/- From 101 kVA to 500 kVA - Rs. 3163/- From 501kVA up to 2500kVA - Rs. 5500/-
21.2 e)(Measurement of insulation resistance)	-	633	Test charges for subsequent measurement Rs. 633
21.3(b)(Temperature-rise test)	-	30250	up to 100kVA Test charges Rs. 15180/- From 101 kVA to 500 kVA - Rs. 18975/- From 501kVA up to 2500kVA - Rs. 30250/-
21.2 f)(Induced over-voltage withstand test)	-	1265	Test charges for subsequent measurement Rs. 1265
21.2 g)( Separate-source voltage withstand test)	-	1265	Test charges for subsequent measurement Rs. 1265
21.3(c)(Short-circuit withstand test)	-	75647	Test charges may vary as per KVA & kV rating and no. of tap. Given charges up to 250 KVA, 11 KV. For Thermal ability to withstand short circuit test will be charged at 15% in addition to above charges.
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	11000	up to 100kVA Test charges Rs. 6600/- From 101 kVA to 2500 kVA - Rs. 11000/-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5500	up to 100kVA Test charges Rs. 3300/- From 101 kVA to 2500 kVA - Rs. 5500/-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	11000	up to 100kVA Test charges Rs. 6600/- From 101 kVA to 2500 kVA - Rs. 11000/-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5500	up to 100kVA Test charges Rs. 3300/- From 101 kVA to 2500 kVA - Rs. 5500/-
21.5.2.3( Oil leakage test (routine test))	-	5500	Same for every rating
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	11000	up to 100kVA Test charges Rs. 6600/- From 101 kVA to 2500 kVA - Rs. 11000/-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	5500	up to 100kVA Test charges Rs. 3300/- From 101 kVA to 2500 kVA - Rs. 5500/-
21.5.3.3(Oil leakage test (routine test))	-	5500	Same for all rating
15.5(Total Dry Film Paint Thickness)	-	3000	.
21.4 e(BDV and moisture content of oil in the transformer)	-	3000	.
21.4 d(Paint adhesion tests)	-	5560	Same for all rating
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	8250	up to 500kVA Test charges Rs. 5775/- From 501 kVA to 2500 kVA - Rs. 8250/-
21.4 c(No load current at 112.5 percent voltage.)	-	1760	Test charges for subsequent tap Rs. 880
11(Minimum clearance in Air)	-	1100	Same for all rating
16(Conservator for Non-sealed type Transformers)	-	880	Same for all rating
20(Fittings)	-	880	same for all rating
21.3(a )(Lightning impulse test)	-	57750	up to 100kVA Test charges Rs. 28875/- From 100 kVA to 250 kVA - Rs. 31762/- From 250 kVA to 500 kVA - Rs. 34650/- From 500kVA up to 1000kVA - Rs. 46200/- From 1000kVA up to 2500kVA - Rs. 57750/-
21.4 b(Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))	-	238050	Charges will be reduced based on the kVA, kV and no. of taps. Above mentioned charges are considering maximum rating of transformer. For Thermal ability to withstand short circuit test will be charged at 15% in addition to above charges.
21.4 a)( Determination of sound levels)	-	2882	Additional tap - 2882
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	.
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	.
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	.
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	.
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	.
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	.
21.5.1.3(Oil leakage test upto 200 KVA)	-	5500	Same for all rating

30 Nov, 2028

-
-

728

Electrical Research and Development Association, gujurat

7101125

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

963359 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual inspection)	-	9217	-
10.2(Maximum power determination)	-	28173	-
10.3(Insulation test)	-	4488	-
4(Marking)	-	0	-
10.4(Measurement of temperature coefficients)	-	32669	-
10.5(Measurement of NOCT)	-	52133	-
10.6(Performance at STC and NOCT)	-	28173	-
10.7(Performance at low irradiance)	-	5245	-
10.8(Outdoor exposure test)	-	66472	-
10.9(Hot-spot endurance test)	-	61005	-
10.10(UV preconditioning)	-	47327	-
10.11(Thermal cycling test)	-	272058	-
10.12(Humidity freeze test)	-	96055	-
10.13(Damp heat test)	-	107667	-
10.14(Robustness of termination test)	-	19176	-
10.15(Wet leakage current test)	-	9507	-
10.16(Mechanical load test)	-	38498	-
10.17(Hail test)	-	42422	-
10.18(Bypass diode thermal' test)	-	43074	-

30 Nov, 2028

-
-

729

Electrical Research and Development Association, gujurat

7101125

IS 648 (2022)

Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision

All Grades as Per Table-1

36535 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 6.3.2(Adherence test for CRNO strips)	-	575	Adherence for CRNO Strips
Cl. No. 7.1.1.1 & Table-1(AC Magnetization for CRNO Strips)	-	4695	A.C. Magnetization for CRNO Strips (At 2500, 5000 & 10000 AT/m)
Cl. No. 7.1.2.1 , 7.1.2.2 & Table-1(Specific Core Loss Measurement with Annealing & with Ageing for CRNO strips)	-	11290	Specific Core Loss (At 1.0 T & 1.5 T) With Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & with Ageing for CRNO strips)	-	9620	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & without Ageing for CRNO strips)	-	2030	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & Without Ageing
Cl. No. 7.1.2.3 & Table-1(Anisotropy of Losses for CRNO Strips)	-	2185	Anisotropy of Losses for CRNO strips
Cl. No. 7.2.5(Surface Insulation Resistivity for CRNO Strips)	-	2230	Surface Insulation Resistivity for CRNO Strips
Cl. No. 7.2.6(Thermal Effect on Coating for CRNO Strips)	-	11385	Thermal Effect on Coating for CRNO Strips
Cl. No. 9.1 &Table-1(Stacking Factor for CRNO Strips)	-	575	Stacking Factor for CRNO Strips
Cl. No. 9.2 & Table-1(Ductility (Bend test) for CRNO Strips)	-	575	Ductility (Bend Test) for CRNO Strips
Cl. No. 7.2.7(Resistance to Solvent for CRNO Strips)	-	2450	Resistance to Solvents for CRNO Strips
Cl. No. 8.1(Thickness for CRNO Strips)	-	575	Lamination Thickness for CRNO Strips
Cl. No. 6.3.2(Adherence test for CRNO strips)	-	575	Adherence for CRNO Strips
Cl. No. 7.1.1.1 & Table-1(AC Magnetization for CRNO Strips)	-	4695	A.C. Magnetization for CRNO Strips (At 2500, 5000 & 10000 AT/m)
Cl. No. 7.1.2.1 , 7.1.2.2 & Table-1(Specific Core Loss Measurement with Annealing & with Ageing for CRNO strips)	-	11290	Specific Core Loss (At 1.0 T & 1.5 T) With Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & with Ageing for CRNO strips)	-	9620	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & With Ageing
Cl. No. 7.1.2.1 & Table-1(Specific Core Loss Measurement without Annealing & without Ageing for CRNO strips)	-	2030	Specific Core Loss (At 1.0 T & 1.5 T) Without Annealing & Without Ageing
Cl. No. 7.1.2.3 & Table-1(Anisotropy of Losses for CRNO Strips)	-	2185	Anisotropy of Losses for CRNO strips
Cl. No. 7.2.5(Surface Insulation Resistivity for CRNO Strips)	-	2230	Surface Insulation Resistivity for CRNO Strips
Cl. No. 7.2.6(Thermal Effect on Coating for CRNO Strips)	-	11385	Thermal Effect on Coating for CRNO Strips
Cl. No. 9.1 &Table-1(Stacking Factor for CRNO Strips)	-	575	Stacking Factor for CRNO Strips
Cl. No. 9.2 & Table-1(Ductility (Bend test) for CRNO Strips)	-	575	Ductility for CRNO Strips
Cl. No. 7.2.7(Resistance to Solvent for CRNO Strips)	-	2450	Resistance to Solvents for CRNO Strips
Cl. No. 8.1(Thickness for CRNO Strips)	-	575	Lamination Thickness for CRNO Strips

30 Nov, 2028

-
-

730

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1783 : Part 2 (2014)

Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision)

42200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	600	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 1))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 1 D Drums Figure 2))	-	1050	-
6(Material)	-	550	-
7(Construction)	-	600	-
7.1(Construction)	-	600	-
7.2(Construction)	-	600	-
7.3(Construction)	-	600	-
7.4(Construction)	-	600	-
7.5(Construction)	-	600	-
7.7(Construction)	-	600	-
8(Finish )	-	600	-
9.1(Leakage at air pressure )	-	1000	-
9.2(Drop Test)	-	2700	-
9.3(Hydraulic Pressure Test)	-	1700	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 C Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
5(Dimensions (Type 2 D Drums Figure 2))	-	1050	-
6(Material)	-	600	-
6(Material)	-	600	-
4(Capacity)	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 D Drums Figure 1))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 C Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
5(Dimensions (Type 1 D Drums Figure 2))	-	-	-
6(Material)	-	-	-
7(Construction)	-	-	-
7.1(Construction)	-	-	-
7.2(Construction)	-	-	-
7.3(Construction)	-	-	-
7.4(Construction)	-	-	-
7.5(Construction)	-	-	-
7.7(Construction)	-	-	-
8(Finish )	-	-	-
9.1(Leakage at air pressure )	-	-	-
9.2(Drop Test)	-	-	-
9.3(Hydraulic Pressure Test)	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 C Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
5(Dimensions (Type 2 D Drums Figure 2))	-	-	-
6(Material)	-	-	-
6(Material)	-	-	-
Cl- 6(C)	-	-	-
Cl- 6(Mn)	-	-	-
Cl- 6(S)	-	-	-
Cl- 6(P)	-	-	-
Cl- 6(Al)	-	-	-
Cl- 6(Si)	-	-	-
Cl- 6(N)	-	-	-
Cl- 6(Cr+Ni+Nb+V+Ti+Mo+B+C)	-	-	-

-
Included w.e.f. 26.02.2026

731

Stellar Test House, Noida

8171606

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

All Grade & Type

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	0	-
Cl-5.2(Adhesives for Bonding of Veneers)	-	0	-
Cl-6.1(Manufacture)	-	0	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	500	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	0	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	0	-
Cl-6.5(Manufacture (Scarf joints))	-	500	-
Cl-6.6(Manufacture ( Preservative treatment))	-	0	-
Cl-7.1(Dimensions -length)	-	500	-
Cl-7.2(Thickness)	-	500	-
Cl-7.3(Squareness)	-	500	-
Cl-8.1, 8.2(Workmanship and finish)	-	500	-
Cl-10.3(Moisture Content)	-	600	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	500	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.5.2(Water Resistance Test (Alternate method))	-	1500	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	1000	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	1000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	1000	-
Cl-10.8(Tensile Strength)	-	1000	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	800	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	800	-
Cl-10.10, Table-4 (ii) a(Wet Bending Strength:- Modulus of Rupture: Across the Face Grain: Average))	-	800	-
Cl-10.10, Table-4, (ii) b(Wet Bending Strength; (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	800	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Wood Failure)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N -Dry State)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N- Resistance to Water)	-	0	-
Cl-10.4.1, 10.5.1.1 and 10.7.1, Table-2(Average Failure Load, N - Resistance to Micro-Organisms)	-	0	-
Cl-10.8 (a)(Tensile strength)	-	1000	-
Cl-10.8 (b)(Tensile strength)	-	1000	-
Cl-10.8 (c)(Tensile strengths in both directions)	-	1000	-
Cl-7.1(Dimensions (width))	-	200	-
Cl-7.3(Edge Straightness)	-	200	-
Cl-10.12(Formaldehyde Content Test)	-	1500	-
Cl-10.13(Steady-State Formaldehyde Emission Test)	-	1000	-
Cl-10.11(Retention of Preservative)	-	1000	-

26 Sep, 2028

-
Included w.e.f 24.02.2026

732

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 302 : PART 1 (Commercial Electric Forced Convection Ovens, Steam Cookers and Steam-Convection Ovens)

Commercial Electric Forced Convection Ovens, Steam Cookers and Steam-Convection Ovens

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for tests)	-	1000	-
5(General conditions for tests)	-	1000	-
6(Classifications)	-	1000	-
6(Classifications)	-	1000	-
4(General Requirement)	-	1000	-
4(General Requirement)	-	1000	-
5(General conditions for tests)	-	1000	-
6(Classifications)	-	1000	-
7(Marking and instructions)	-	1000	-
4(General requirement)	-	1000	-
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16(Leakage current and electric strength)	-	1000	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
19(Abnormal Operation)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
23(General)	-	1000	-
24(Components)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
31(Resistance to Rusting)	-	1000	-
4(General requirement)	-	1000	-

05 Aug, 2027

-
"1 18 (Endurance) Endurnace Requirements and tests are specified in part 2 when necessary 2 18 (Endurance) Endurance Requirements and tests are specified in part 2 when necessary 3 18 (Endurance Test requirements and tests) Endurance Test requirements and tests Requirements and tests are specified in part 2 when necessary 4 9 (Starting of motor operation test requirements and tests) Starting of motor operation test requirements and tests Requirements and tests are specified in part 2 when necessary 5 9 (Starting of motor operation test requirements and tests) Starting of motor operation test requirements and tests Requirements and tests are specified in part 2 when necessary 6 19.11.4.7 (Harmonics) Harmonics facility is not available with the laboratory 7 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and iterruptions facility is not available with the laboratory 8 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges facility is not available with the laboratory 9 19.11.4.4 (Surge immunity test) Surge immunity test facility is not available with the laboratory 10 19.11.4.3 (Fast transient bursts) Fast transient bursts facility is not available with the laboratory 11 19.11.4.2 (Radiated fields) Radiated Fields facility is not available with the laboratory 12 19.11.4.1 (Electrostatic discharges) Electrostatic discharges facility is not available with the laboratory 13 32 (Radiation Toxicity and Similar Hazards) Radiation Toxicity and similar Hazards facility is not available with the laboratory 14 32 (Radiation Toxicity and Similar Hazards) Radiation Toxicity and similar Hazards facility is not available with the laboratory 15 19.11.4.1 (Electrostatic discharges) Electrostatic discharges facility is not available with the laboratory 16 19.11.4.2 (Radiated fields) Radiated Fields facility is not available with the laboratory 17 19.11.4.3 (Fast transient bursts) Fast transient bursts facility is not available with the laboratory 18 19.11.4.4 (Surge immunity test) Surge immunity test facility is not available with the laboratory 19 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges facility is not available with the laboratory 20 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and iterruptions facility is not available with the laboratory 21 19.11.4.7 (Harmonics) Harmonics facility is not available with the laboratory 22 18 (Endurance) Endurance Requirements and tests are specified in part 2 when necessary 23 18 (Endurance Test requirements and tests) Endurance Test requirements and tests Requirements and tests are specified in part 2 when necessary" 24. cl.24

733

DELHI TEST HOUSE, Azadhpur

8131406

IS 11199 (2024)

Textiles - High density polyethylene HDPE monofilament twine door nets - Specification First Revision

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.3, Table-1 (ii)(Construction)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iii)("Turns per metre, Min a) Inner (single yarn)")	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iii)("Turns per metre, Min b) Outer (twine)")	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iv)(Breaking load, N, Min)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (v)(Elongation at break, percent, Max)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (iii)(Type of mesh)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (i)(Nominal diameter)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (i)(Length, m, Min)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (ii)(Width, m, Min)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (iv)(Size of mesh, cm (or length of mesh side))	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.2(Twines)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.3(Iron Rings)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.4(Iron Beads)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.1(Filament Identification)	-	2000	TESTING CHARGES :- Rs.- 17500/-
Cl-8(Marking)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (ii)(Construction)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iii)("Turns per metre, Min a) Inner (single yarn)")	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iii)("Turns per metre, Min b) Outer (twine)")	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (iv)(Breaking load, N, Min)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (v)(Elongation at break, percent, Max)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (iii)(Type of mesh)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.1.3, Table-1 (i)(Nominal diameter)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (i)(Length, m, Min)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (ii)(Width, m, Min)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.4, Table-2 (iv)(Size of mesh, cm (or length of mesh side))	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.2(Twines)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.3(Iron Rings)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-3.4(Iron Beads)	-	500	TESTING CHARGES :- Rs.- 17500/-
Cl-5.1(Filament Identification)	-	2000	TESTING CHARGES :- Rs.- 17500/-
Cl-8(Marking)	-	500	TESTING CHARGES :- Rs.- 17500/-
Clause No. 3.1.1(Density of the Twine Material)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Clause No. 3.1.1(Melt Flow Index)	-	1500	TESTING CHARGES :- Rs.- 17500/-
Clause No. 3.1.2(Carbon Black Content)	-	1500	TESTING CHARGES :- Rs.- 17500/-
Clause No. 3.2(Relative Density of Border Rope)	-	1000	TESTING CHARGES :- Rs.- 17500/-
Clause No. 3.2.1(Minimum Breaking Load of the Rope)	-	1000	TESTING CHARGES :- Rs.- 17500/-

17 Jun, 2027

-
Included w.e.f. 24.02.2026

734

Vimta labs Limited, Hyderabad

6102906

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	3000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	2000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	3000	-
2.10(Clearances, creepage distances and distances through insulation)	-	3000	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	500	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	4000	-
4.6(Openings in enclosures)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	2000	-
5.3(Abnormal operating and fault conditions)	-	2000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
1.5(Components)	-	0	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.8.7(Switches and Relay)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.4(Opto-coupler)	-	0	-
4.7(Resistance to fire)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
4.3.12(Flammable liquids)	-	0	-
4.3.13.2(Ionizing radiation)	-	0	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	0	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	0	-
4.3.13.5(LED, laser class)	-	0	-
Annex A3(Hot flaming oil test)	-	0	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	0	-
Annex K(Thermal Control)	-	0	-
Annex Q(Voltage Dependent Resistors)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-
4.6.2(Bottoms of fire enclosures)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.2.8(Cathode Ray Tubes)	-	0	-
4.3.8(Batteries)	-	0	-

31 Mar, 2028

-
included w.e.f 16.02.2026

735

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 14286 : Part 1 : Sec 4 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	2500	-
Cl-11.1(Visual inspection (MQT 01))	-	2000	-
Cl-11.2(Maximum power determination (MQT 02))	-	7000	-
Cl-11.3(Insulation test (MQT 03))	-	15000	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	5000	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	2500	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	8500	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	45000	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	120000	-
Cl-11.10(UV preconditioning test (MQT 10))	-	120000	-
Cl-11.11(Thermal cycling test (MQT 11))	-	155000	-
Cl-11.12(As per IEC 61215-1:2016)	-	75000	-
Cl-11.13(Damp heat test (MQT 13))	-	155000	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	15000	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	20000	-
Cl-11.16(Static mechanical load test (MQT 16))	-	45000	-
Cl-11.17(Hail test (MQT 17))	-	50000	-
Cl-11.18(Bypass diode testing (MQT 18))	-	70000	-
Cl-11.19(Stabilization (MQT 19))	-	90000	-
5(Marking and documentation)	-	2500	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	70000	-

23 Jun, 2028

-
Included w.e.f 09.03.2026

736

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1783 : Part 1 (2014)

Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision)

39200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Capacity)	-	3000	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 D Drums Figure 1))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 C Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	500	-
5(Dimensions (Type 1 D Drums Figure 2))	-	0	-
5(Dimensions (Type 1 D Drums Figure 2))	-	0	-
6(Material)	-	3000	-
7.1(Construction)	-	700	-
7.2(Construction)	-	700	-
7.3(Construction)	-	700	-
7.4(Construction)	-	700	-
7.5(Construction)	-	700	-
7.6(Construction)	-	700	-
8(Finish )	-	1000	-
9.1(Leakage at air pressure )	-	3000	-
9.2(Drop Test)	-	2500	-
9.3(Hydraulic Pressure Test)	-	5000	-
8.3(Finish)	-	1000	-
8.2(Finish)	-	1000	-
8.1(Finish)	-	1000	-
7.6(Closures)	-	2500	-
7.6(Closures)	-	2500	-
7.5(CONSTRUCTION)	-	700	-
7.4(CONSTRUCTION)	-	700	-
7.4(CONSTRUCTION)	-	700	-
7.3(CONSTRUCTION)	-	700	-
7.2(CONSTRUCTION)	-	700	-
6, b(Thickness of ends(1.25± 0.09))	-	500	-
5, Fig 2(Type 2 D(h3: 4 min))	-	500	-
5, Fig 2(Type 2 D(D1: 571.5 ± 2))	-	1000	-
5, Fig 2(Type 2 C(h3: 4 min))	-	0	-
5, Fig 2(Type 2 C( D1: 571.5 ± 2))	-	0	-
5, Fig 1(Type 1 D(h3: 4 min))	-	0	-
5, Fig 1(Type 1 D(D1: 571.5 ± 2))	-	0	-
5, Fig 1(Type 1 C(h3: 4 min))	-	0	-
5, Fig 1(Type 1 C( D1: 571.5 ± 2))	-	0	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 C Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
Dimensions (Type 2 D Drums Figure 2)(D3 Diameter over chime 585 Max)	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
5(Dimensions (Type 2 D Drums Figure 2))	-	500	-
6(Material)	-	0	-

-
Included w.e.f. 26.02.2026

737

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 3502 (2009)

Steel chequered plates (Third Revision)

All

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Workmanship)	-	3000	-
Cl 6(Workmanship)	-	3000	-
Cl 8(Tensile Test)	-	3000	-
Cl 9(Press)	-	3000	-
Cl 5(Workmanship)	-	3000	-
Cl 6(Workmanship)	-	3000	-
Cl 8(Tensile Test)	-	3000	-
Cl 9(Press)	-	3000	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	3000	-
Cl 5(Workmanship)	-	3000	-
Cl 6(Workmanship)	-	3000	-
Cl 8(Tensile Test)	-	3000	-
Cl 9(Press)	-	3000	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	3000	-
Cl. 11(Weight)	-	3000	-
Cl. 10(Thickness)	-	3000	-
Cl. 10(Width)	-	3000	-
Cl.8(Elongation)	-	3000	-
Cl.8(Yield Stress)	-	3000	-
4.1(Grade E 250A of IS 2062.)	-	3000	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	3000	-
Cl 9(Press)	-	3000	-
Cl 8(Tensile Test)	-	3000	-
Cl 6(Workmanship)	-	3000	-
Cl 5(Workmanship)	-	3000	-
Cl.4.1 (IS-2062, E250A)(CARBON)	-	3000	-
Cl.4.1 (IS-2062, E250A)(SULPHUR)	-	3000	-
Cl.4.1 (IS-2062, E250A)(PHOSPHURS)	-	3000	-
Cl.4.1 (IS-2062, E250A)(MANGANESE)	-	3000	-
Cl.4.1 (IS-2062, E250A)(SILICON)	-	3000	-
Cl.4.1 (IS-2062, E250A)(CARBON EQUIVALENT)	-	3000	-
Cl.4.1 (IS-2062, E250A)(NITROGEN)	-	3000	-
Cl 5(Workmanship)	-	3000	-
Cl 6(Workmanship)	-	3000	-
Cl 8(UTM)	-	3000	-
Cl 9(Press)	-	3000	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	3000	-
4(Carbon as C)	-	3000	-
4(Manganese as Mn)	-	3000	-
4(Sulphur as S)	-	3000	-
4(Phosphorus as P)	-	3000	-
4(Silicon as Si)	-	3000	-
4(Aluminium as Al)	-	3000	-
4(Micro Alloying elements)	-	3000	-
4(Niobium as Nb)	-	3000	-
4(Vanadium as V)	-	3000	-
4(Titanium as Ti)	-	3000	-
4(Nitrogen content)	-	3000	-
8(Tensile Strength-IS:1608(P1)-22)	-	3000	-
8(Yield Stress-IS:1608(P1)-22)	-	3000	-
8(Elongation on SoA 5.65mm GL)	-	3000	-
10(Length - SOP MT-23)	-	3000	-
10(Width - SOP MT-23)	-	3000	-
10(Thickness- SOP MT-23)	-	3000	-
10(Mass -SOP MT-23)	-	3000	-
10(Chequred Height - SOP MT-23)	-	3000	-
Cl 4.1(Carbon- IS 228(Part 1))	-	3000	-
Cl 4.1(Sulphur- IS 228(Part 9))	-	3000	-
Cl 4.1(Phosphorous- IS 228(Part 3))	-	3000	-
Cl 4.1(Manganese- IS 228(Part 2))	-	3000	-
Cl 4.1(Carbon Equivalent (CE))	-	3000	-
Cl 4.1(Silicon- IS 228(Part 2))	-	3000	-
Cl 4.1(Nitrogen -IS 228(Part 19))	-	3000	-
Cl 10(Length, Width, Thickness & Chequered Height)	-	3000	-
10(Chequred Height - SOP MT-23)	-	3000	-

-
Included w.e.f. 26.02.2026

738

Vimta labs Limited, Hyderabad

6102906

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	5000	-
8(Constructional requirements with regard to the protection against electric shock)	-	3000	-
9(Electric shock hazard under normal operating conditions)	-	4000	-
10(Insulation requirements)	-	3000	-
11(Fault conditions)	-	2000	-
12(Mechanical strength)	-	4000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	-
14(Components)	-	1000	-
15(TERMINALS)	-	4000	-
16(External flexible cords)	-	3000	-
17(Electrical connections and mechanical fixings)	-	2000	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	-
19(Stability and mechanical hazards)	-	3000	-
20(Resistance to fire)	-	5000	-
6.1(Ionizing radiation)	-	0	-
6.2(Laser Radiation)	-	0	-
6.3()	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
8.16(Wound Component)	-	0	-
14(Components)	-	0	-
15(Internal wires and power cords)	-	0	-
16.3b(Cord Bending Test)	-	0	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	0	-
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	3000	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	2000	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-

31 Mar, 2028

-
1 6.1 (Ionizing radiation) Ionizing radiation Test facility not Available 2 6.2 (Laser Radiation) Laser Radiation Test facility not Available 3 8.16/ H 2.2/ H 2.3 (Requirements for insulated winding wires for use without additional interleaved insulation) Requirements for insulated winding wires for use without additional interleaved insulation Test facility not Available 4 8.16 (Wound Component) Wound Component Test facility not Available

739

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

8000 View breakup
-

Clause No.	Exclusion	Remark
2.1(General)	-	COMPLETE TESTING CHARGE RS 8000/-
2.2(Manufacture)	-	COMPLETE TESTING CHARGE RS 8000/-
2.2.2(diameter of the socket of cap)	-	COMPLETE TESTING CHARGE RS 8000/-
2.1(General)	-	COMPLETE TESTING CHARGE RS 8000/-
2.2(Manufacture)	-	COMPLETE TESTING CHARGE RS 8000/-
2.2.2(diameter of the socket of cap)	-	COMPLETE TESTING CHARGE RS 8000/-
6.1.1(VCM Content Test)	-	COMPLETE TESTING CHARGE RS 8000/-
2.2.2 table 1(Laying length)	-	COMPLETE TESTING CHARGE RS 8000/-

17 Mar, 2028

-
Included w.e.f 24.03.2026

740

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2547 : Part 1 (1976)

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Table-1(Beta hemihydrate, SO3)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, CaO)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Beta hemihydrate,. Loss of ignition)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, SO3)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, CaO)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Loss of ignition)	-	8000	-
Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. SO3)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. CaO)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, SO3)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, CaO)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Soluble magnesium salts as MgO)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Soluble sodium salts as Na2O)	-	8000	-
Clause 4.1, Table-1(Keene's Plaster, Loss of ignition)	-	8000	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8000	-
Cl 5.2, Table 3(Transverse Strength)	-	8000	-
Cl 5.2, Table 4(Soundness)	-	8000	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8000	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8000	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8000	-
Cl 5.2, Table 7(Expansion On Setting %Max)	-	8000	-
Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent)	-	8000	-
Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster )	-	8000	-
Cl 5.2, Table 4(Soundness)	-	8000	-
Cl 5.2, Table 3(Transverse Strength)	-	8000	-
Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster)	-	8000	-
5.1(Purity)	-	8000	-

-
Included w.e.f. 26.02.2026

741

Vimta labs Limited, Hyderabad

6102906

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	1000	-
10(PROVISION FOR EARTHING)	-	3000	-
11(MOISTURE RESISTANCE)	-	3000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	3000	-
16(Construction)	-	3000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	1000	-
19(Resistance to heat, fire and tracking)	-	3000	-
20(Resistance to corrosion)	-	4000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

31 Mar, 2028

-
1 16 (Bridging resistor in primary circuit) Bridging resistor in primary circuit Test facility is not Available 2 16 (Capacitor and RC units) Capacitors and RC units Test facility is not Available 3 16 (RF suppression (X-Y capacitors)) RF suppression (X-Y capacitors) Test facility is not Available 4 16 (MOV/VDR) MOV/VDR Test facility is not Available 5 16 (SMPS/Mains Transformer) SMPS/Mains Transformer Test facility is not Available 6 16 (PCB material) PCB material Test facility is not Available 7 19 (Metal base PCB for LED) Metal base PCB for LED Test facility is not Available 8 19 (Bobbin) Bobbin Test facility is not Available 9 16 (EMI/EMC filter) EMI/EMC filter Test facility is not Available 10 16 (Opto-coupler) Opto-coupler Test facility is not Available

742

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

44000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44000	-
Clause 4.1 (ii))(Free water, percent)	-	44000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44000	-
Clause 4.1 ( v)(Chloride content, Max)	-	44000	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44000	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44000	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44000	-
Clause 6.3(Density kg/m3)	-	44000	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44000	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44000	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44000	-
Clause 6.6(Water Absorption)	-	44000	-
Clause 6.7(Jolting Test)	-	44000	-
Clause 9(MARKING)	-	44000	-

-
Included w.e.f. 26.02.2026

743

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2095 : Part 2 (2022)

Gypsum plaster boards - specification: Part 2 Coated laminated gypsum plaster boards Third Revision of IS 2095 Part 2

40500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 ( i)("CaS04 . 2H2 O, Min")	-	4000	-
Clause 4.1 (ii))(Free water, percent)	-	3000	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	4000	-
Clause 4.1 ( iv)("SiO2 , Max")	-	0	-
Clause 4.1 ( v)(Chloride content, Max)	-	0	-
(Clause 6.1.1)(Dimensions - Width,Length, Thickness (mm))	-	5000	-
(Clause 6.1.2)(Tolerance on Shape)	-	5000	-
(Clause 6.2)(Density)	-	3500	-
(Clause 6.3)(" Flexural Breaking Load ")	-	5000	-
(Clause 6.4)(Fire Resistance)	-	6500	-
(Clause 6.5)("Finish ")	-	0	-
(Clauses 7.1.2 )(Sampling of Gypsum Plaster Board)	-	0	-

-
Included w.e.f. 26.02.2026

744

CIMEC Infralabs Private Limited

8195606

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

Size: 5 to 50 mm, Mild Steel Grade -I & II and Medium Tensile

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	100	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8.2(Bend test)	-	400	-
Cl 9.3(Press)	-	200	-
Cl 5.1(Workmanship)	-	100	-
Cl 6.1(Diameter)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1000	-
Cl 9.3(Press)	-	200	-
Cl 5.1(Workmanship)	-	100	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8(Physical Requirements)	-	1500	-
Cl 9.3(Press)	-	200	-
Clause -4, 4.3(TITANIUM)	-	400	-
Clause -4, 4.2(VANADIUM)	-	400	-
Clause -4, 4.1(NIOBIUM)	-	400	-
Clause -4, 4.1(Molybdenum)	-	400	-
Clause -4, 4.1(Chromium)	-	400	-
Clause -4, 4.1(Nickel)	-	400	-
Clause -4, 4.1( ALUMINIUM)	-	400	-
Clause -4, 4.1(SILICON)	-	400	-
Clause -4, 4.1(NITROGEN)	-	600	-
Clause -4, 4.1(MANGANESE)	-	400	-
Clause -4, 4.1(PHOSPHURS)	-	400	-
Clause -4, 4.1(SULPHUR)	-	400	-
Clause -4, 4.1( CARBON)	-	400	-
Cl. 8.1 Table 1(Elongation)	-	1000	-
Cl. 8.1 Table 1(Yield Stress)	-	1000	-
Clause 8.1(Elongation)	-	1000	-
Clause 8.1(Yield Stress)	-	1000	-
Clause 9.3(Bend test)	-	400	-
Clause 6.1(Size)	-	200	-
Cl 9.3(Press)	-	200	-
Cl 8(UTM)	-	1500	-
Cl 6.2(Weight)	-	200	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 5.1(Workmanship)	-	100	-
7(Tolerance)	-	200	-
Cl 5.1(Workmanship)	-	100	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 9.3(Press)	-	200	-
Cl 4.1(Workmanship)	-	100	-
Cl 5 & 6(Diameter)	-	200	-
Cl 7(UTM)	-	1500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	400100	-
Clause 5.1(IS 432 Part 1)	-	200	-
Clause 6.2(IS 1732)	-	200	-
Clause 8.1(IS 1608 Part 1)	-	1500	-
Clause 4(Any Instrumental Method/Chemical Method)	-	1500	-
Clause 4(By Calculation)	-	200	-
Clause 4(By Calculation)	-	200	-
Clause 4(Any Instrumental Method/Chemical Method)	-	1500	-
Clause 5.1(Freedom from Defect)	-	100	-
Clause 6.2(Mass)	-	200	-
Clause 8.1(Ultimate Tensile Stress)	-	1000	-
Clause 4(Boron)	-	500	-
Clause 4(By Calculation)	-	200	-
Clause 4(By Calculation)	-	200	-
Clause 4(Copper)	-	400	-
8.1 & 9.2(Yield Strength - IS: 1608 (P1))	-	1000	-
8.1 & 9.2(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	1000	-
11(Marking)	-	100	-
Clause 5.1(Freedom from Defect)	-	100	-
Clause 6.2(Mass)	-	200	-
Clause 8.1(Ultimate Tensile Stress)	-	1000	-
Clause 4(Boron)	-	500	-
Clause 4(Carbon Equivalent)	-	600	-
Clause 4(Ni+V+Ti)	-	1500	-
Clause 4(Copper)	-	400	-
Clause 4(Copper)	-	400	-
Cl 8(UTM)	-	1500	-

14 Jan, 2029

-
Included w.e.f. 24.02.2026

745

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	2500	-
Clause. 5.0(Free water (Natural / By -product))	-	2000	-
Clause. 5.0(pHvalue (Natural / By -product))	-	15000	-
Clause. 5.0(SiO2)	-	2500	-
Clause. 5.0(Chloride content)	-	2500	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2500	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	2000	-
Clause. 7.0(Loading Capability)	-	3500	-
Clause. 7.0(Water Absorption)	-	2000	-
Clause. 7.0(Fire Resistance)	-	500	-
Clause. 7.0(Finish)	-	2000	-
Cl-5.3(Paper Liner)	-	3000	-
Clause 7.1(Dimensions)	-	2500	-
(Clause 7.2)(Density)	-	5000	-
(Clause 7.3)(Flexural Load)	-	0	-
(Clause 7.4)(Impact Resistance)	-	0	-
(Clause 7.5)(Surface Hardness)	-	0	-
(Clause 7.6)(Loading Capability)	-	0	-
(Clause 7.7)(Water Absorption)	-	0	-
(Clause 7.8)(Fire Resistance)	-	0	-

-
Included w.e.f. 26.02.2026

746

Vimta labs Limited, Hyderabad

6102906

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	0	-
4.6(Power interface)	-	5000	-
4.7(Marking & instructions)	-	2000	-
5.1(Protection against shock and energy hazards)	-	4000	-
5.2(Requirement of auxiliary circuits)	-	3000	-
5.3(Protective earthing and bonding)	-	3000	-
5.4(AC and DC power isolation)	-	2000	-
5.5(Over current and earth fault condition)	-	3000	-
5.6(Safety interlocks)	-	0	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
6.1(Wiring, connections and supply)	-	3000	-
6.2(Connection to power)	-	2000	-
6.3(Wiring terminals for external power conductors)	-	2000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	3000	-
7.3(MECHANICAL STRENGTH)	-	5000	-
7.4(Construction details)	-	3000	-
7.5(Resistance to fire)	-	5000	-
7.6(Battery location)	-	1000	-
7.7(Temperature rise)	-	5000	-
8.1(General procision for earth leakage)	-	5000	-
8.2(Electric Strength)	-	3000	-
8.3(Abnormal operating and fault conditions)	-	5000	-
9.0(Connection to telecommunication networks)	-	2000	-
4.5/RD 1.5(Components)	-	0	-
2.10.5.11(SMPS/Main transformer)	-	0	-
2.10.6(PCB Material)	-	0	-
3.2.5(Non-rewirable plug with PVC sheathed cable)	-	0	-
3.2.4(Appliances inlets/connectors)	-	0	-
2.10.5.4(Semiconductor devices)	-	0	-
2.10.5.13(Winding wires)	-	0	-
4.3.8(Batteries)	-	0	-
2.10.5.6(Thin sheet material)	-	0	-
5.6.1/ RD 2.8.7(Switches & Relays)	-	0	-
6.1.1/ RD 3.1.4(Insulating Conductors)	-	0	-
Annex I.5(Solid-state backfeed protection)	-	0	-
I.5(transient overvoltages)	-	0	-
I.5(voltage variations)	-	0	-
I.5(electromagnetic susceptibility)	-	0	-
I.5(electrostatic discharge)	-	0	-
Annex M(Ventilation of battery compartments)	-	0	-
2.10.8 of RD(Tests on coated printed boards and coated components)	-	0	-
2.10.9 of RD(Thermal cycling)	-	0	-
2.10.10 of RD(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11 of RD(Tests for semiconductor devices and for cemented joints)	-	0	-
Annex L.5, Cl.3.3.3(Non-linear loads)	-	0	-

31 Mar, 2028

-
1 4.5/RD 1.5 (Components) Components Test facility not available 2 5.6.1/ RD 2.8.7 (Switches & Relays) Switches & Relays Test facility not Available 3 2.10.5.4 (Semiconductor devices) Semiconductor devices Test facility not Available 4 2.10.6 (PCB Material) PCB Material Test facility not Available 5 3.2.4 (Appliances inlets/connectors) Appliances inlets/connectors Test facility not Available 6 3.2.5 (Non-rewirable plug with PVC sheathed cable) Non-rewirable plug with PVC sheathed cable Test facility not Available 7 4.3.8 (Batteries) Batteries Test facility not Available

747

Sleen India Biz venture Private Limited, Agra

9139736

IS 11928 (2023)

Textiles - Roundslings made of man-made fibres for general service - Specification (second revision)

28500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.1 (i)(Polyamide (nylon))	-	500	-
Cl-4.1.1 (ii)(Polyester)	-	500	-
Cl-4.1.1 (iii)(Polypropylene)	-	500	-
Cl-4.2.1(Protective Outer Cover- Material)	-	1000	-
Cl-4.2.2(Protective Outer Cover- Construction)	-	1000	-
Cl-4.2.3(Sewing)	-	500	-
Cl-4.2.4(Dimensions)	-	500	-
Cl-4.2.5(Colour Coding)	-	300	-
Cl-4.2.6(Other Treatments)	-	1000	-
Cl-4.3(Coupling Components)	-	2000	-
Cl-4.4(End Fittings)	-	2000	-
Cl-4.5(Proof Testing of Coupling Components and End Fittings)	-	2000	-
Cl-4.6(Working Load Limit)	-	3500	-
Cl-4.7(Safe Working Load)	-	3500	-
Cl-4.8(Safety Factor)	-	3500	-
Cl-5.1(Atmospheric Condition for Conditioning and Testing)	-	500	-
Cl-5.2(Strength Test)	-	3500	-
Cl-5.3(Proof Test of Coupling Components and End Fittings)	-	2000	-
Cl-8(Marking)	-	200	-

-
Included w.e.f 17.02.2026

748

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

8000 View breakup
-

Clause No.	Exclusion	Remark
table 1 sl.no: 01(16 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 02(20 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 03(25 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 04(32 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 05(40 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 06(50 )	-	COMPLETE TESTING CHARGE 8000/-
table 1 sl.no: 07(63 )	-	COMPLETE TESTING CHARGE 8000/-
2.1(General)	-	COMPLETE TESTING CHARGE 8000/-
2.2(Manufacture)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2, Table 1(Size)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2, Table 1(Union Laying Length)	-	COMPLETE TESTING CHARGE 8000/-
2.2.3( inside diameter of the socket)	-	COMPLETE TESTING CHARGE 8000/-
2.2.3(Socket length)	-	COMPLETE TESTING CHARGE 8000/-
2.1(General)	-	COMPLETE TESTING CHARGE 8000/-
2.2(Manufacture)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2, Table 1(Size)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2, Table 1(Union Laying Length)	-	COMPLETE TESTING CHARGE 8000/-
2.2.3( inside diameter of the socket)	-	COMPLETE TESTING CHARGE 8000/-
2.2.3(Socket length)	-	COMPLETE TESTING CHARGE 8000/-
6.1.1(VCM Content Test)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2 table 1(Laying length)	-	COMPLETE TESTING CHARGE 8000/-
6.1.1(VCM Content Test)	-	COMPLETE TESTING CHARGE 8000/-
2.2.2 table 1(Laying length)	-	COMPLETE TESTING CHARGE 8000/-

17 Mar, 2028

-
Included w.e.f 24.03.2026

749

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

All Type

7500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	7500.00	-
8.2, Table 3(Proof Stress, N/mm2)	-	7500.00	-
8.2, Table 3(Tensile Strength, N/mm2)	-	7500.00	-
8.2, Table 3(Elongation, %)	-	7500.00	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	7500.00	-
8.4(Bend Test)	-	7500.00	-
8.5(Erichsen Cupping Test)	-	7500.00	-
10.1(Thickness, mm)	-	7500.00	-
10.2(width, mm)	-	7500.00	-
10.3(Length, mm)	-	7500.00	-
10.4(Flatness,mm)	-	7500.00	-
10.5(Camber, mm)	-	7500.00	-
11(Surface Finish)	-	7500.00	-
Cl . 6 .0(Freedom from defect)	-	7500.00	-
13(Marking)	-	7500.00	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	7500.00	-

02 Jun, 2027

-
Included w.e.f. 17.03.2026

750

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	3500	For complete chemical
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	8000	For complete mechanical test
11(Transverse Tension Test,%)	-	1500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	500	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	0	-
14(Reverse Flattaning Test)	-	1500	-
15(Flattaning Test-IS 2328)	-	1500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	-
18(Leak Tighteness Test)	-	2500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	3000	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	0	-
22(Workmanship, Finish and Appearance)	-	500	For complete qualitative tests
23(Repair by Welding or Grinding)	-	0	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	8000	For complete mechanical tests
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	0	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	0	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	0	-
Clause 10.1 - Table 4(Tensile Strength)	-	0	-
Clause 10.1 - Table 4(Yield Strength)	-	0	-
Clause 10.1 - Table 4(Percent Elongation)	-	0	-
Clause 11(Transverse Tension Test)	-	0	-
Clause 12(Hardness Test)	-	0	-
Clause 13(Flange Test)	-	0	-
Clause 14(Reverse Flattening Test)	-	0	-
Clause 15(Flattening Test)	-	0	-
Clause 16(Grain Size)	-	0	-
Clause 18()	-	0	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	0	-
Clause 22(Workmanship, Finish & Appearance)	-	0	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	0	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	0	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	0	-
12.2(Hardness test)	-	0	-
17(Sampling)	-	0	-
25(Marking)	-	0	-
6.7, Table 7, ii)(c) Chromium VI)	-	0	-

-
Included w.e.f. 26.02.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number