BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

691

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

Domestic Electrical Appliance

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	100	-
Cl-5.2(Filter Pads)	-	100	-
Cl-5.3(Sump Tank Capacities)	-	100	-
Cl-5.4(Blower/Fan)	-	100	-
Cl-5.5(Pump Set)	-	100	-
Cl-5.6.1(Electrical wiring and connection)	-	100	-
Cl-5.6.2(Suitable power cable)	-	100	-
Cl-5.7(Switches)	-	100	-
Cl-6(Rating Requirement)	-	100	-
Cl-8.1(Performance Requirement)	-	100	-
Cl-8.2(Sound Test)	-	1000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	2000	-
Cl-8.4(Cooling Efficiency Test)	-	5000	-
Cl-8.5(Power Consumption)	-	1000	-
Cl-8.6(EER Calculation Method)	-	5000	-
Cl-8.7(Drop Test)	-	600	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	1000	-
Cl-12.2.1(General Running Tests)	-	4000	-
Cl-12.2.2(Protection against Electric Shock)	-	4000	-
Cl-12.2.3(High Voltage Tests)	-	5000	-
Cl-12.2.4(Leakage Current)	-	5000	-
Cl-12.2.5(Provision for Earthing)	-	4000	-
Cl-12.2.6(Finish)	-	100	-
Cl-13(Additional Requirement for ECO-Mark)	-	100	-
Cl-14(Storage)	-	100	-
Cl-5.4.3(Fan motor)	-	100	-
Cl-5.1(Enclosure)	-	100	-
Cl-5.2(Filter Pads)	-	100	-
Cl-5.3(Sump Tank Capacities)	-	100	-
Cl-5.4(Blower/Fan)	-	100	-
Cl-5.5(Pump Set)	-	99.98	-
Cl-5.6.1(Electrical wiring and connection)	-	100	-
Cl-5.6.2(Suitable power cable)	-	100	-
Cl-5.7(Switches)	-	1100	-
Cl-6(Rating Requirement)	-	100	-
Cl-8.1(Performance Requirement)	-	100	-
Cl-8.2(Sound Test)	-	1000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	2000	-
Cl-8.4(Cooling Efficiency Test)	-	5000	-
Cl-8.5(Power Consumption)	-	1000	-
Cl-8.6(EER Calculation Method)	-	5000	-
Cl-8.7(Drop Test)	-	600	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	1000	-
Cl-12.2.1(General Running Tests)	-	4000	-
Cl-12.2.2(Protection against Electric Shock)	-	4000	-
Cl-12.2.3(High Voltage Tests)	-	5000	-
Cl-12.2.4(Leakage Current)	-	5000	-
Cl-12.2.5(Provision for Earthing)	-	3000	-
Cl-12.2.6(Finish)	-	100	-
Cl-13(Additional Requirement for ECO-Mark)	-	100	-
Cl-14(Storage)	-	100	-
Cl-5.4.3(Fan motor)	-	100	-

04 Jul, 2027

-
Included w.e.f 23.06.2026

692

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

YSt-210, YSt-240, YSt-310, YSt-355

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	500	-
Cl. 10.4, Fig 2(Concavity, X1)	-	1000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	1000	-
Cl. 10.5, Fig 3(Squareness of side)	-	500	-
Cl. 10.6, Fig 4(External Corner Radius)	-	500	-
Cl. 10.7, Fig 5(Total twist, V)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	-
Cl. 14.1(Exact Length)	-	500	-
Cl. 14.1(Random Length)	-	500	-
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	-
7(Micro Alloying elements(Nb+V+Ti))	-	500	-
7(Carbon equivalent as CE)	-	500	-
10.4(Concavity/Convexity-SOP MT-23)	-	1000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	-
11(Oiling & Painting - IS 4923)	-	0	-
18.1(Height of the internal weld fin - IS 4923)	-	500	-
10.3(Thickness - IS 4923)	-	500	-
13(Marking)	-	500	-
Cl-19(Mechanical Tests)	-	1000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	500	-
Cl. 10.4, Fig 2(Concavity, X1)	-	500	-
Cl. 10.4, Fig 2(Convexity, X2)	-	500	-
Cl. 10.5, Fig 3(Squareness of side)	-	500	-
Cl. 10.6, Fig 4(External Corner Radius)	-	500	-
Cl. 10.7, Fig 5(Total twist, V)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	-
Cl. 14.1(Exact Length)	-	500	-
Cl. 14.1(Random Length)	-	500	-
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	-
7(Micro Alloying elements(Nb+V+Ti))	-	500	-
7(Carbon equivalent as CE)	-	1500	-
10.4(Concavity/Convexity-SOP MT-23)	-	500	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	-
11(Oiling & Painting - IS 4923)	-	0	-
18.1(Height of the internal weld fin - IS 4923)	-	500	-
10.3(Thickness - IS 4923)	-	500	-
13(Marking)	-	500	-
Cl-19(Mechanical Tests)	-	1000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	500	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	500	-
Cl. 10.4, Fig 2(Concavity, X1)	-	500	-
Cl. 10.4, Fig 2(Convexity, X2)	-	500	-
Cl. 10.5, Fig 3(Squareness of side)	-	500	-
Cl. 10.6, Fig 4(External Corner Radius)	-	500	-
Cl. 10.7, Fig 5(Total twist, V)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	-
Cl. 14.1(Exact Length)	-	500	-
Cl. 14.1(Random Length)	-	500	-
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	500	-
7(Micro Alloying elements(Nb+V+Ti))	-	1500	-
7(Carbon equivalent as CE)	-	1500	-
10.4(Concavity/Convexity-SOP MT-23)	-	500	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	-
11(Oiling & Painting - IS 4923)	-	500	-
18.1(Height of the internal weld fin - IS 4923)	-	500	-
10.3(Thickness - IS 4923)	-	500	-
13(Marking)	-	500	-
Cl-19(Mechanical Tests)	-	1000	-

-
INCLUDED W.E.F 23.06.2026

693

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 2062 (Part 2) (2026)

Structural Steel - Part 2 - Hot Rolled Quenched and Tempered Steel Plates, Sheets, Strips and Wide Flats

Hot Rolled Quenched and Tempered Steel Plates, Sheets, Strips and Wide Flats

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	1000	-
Cl-6(Manufacture )	-	1000	-
Cl-7.1(Ladle Analysis (Heat Analysis))	-	1000	-
Cl-7.1 & 7.3, Table 1 (C (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (Mn (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (S (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (P (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Si (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ni (S Grades) )	-	1000	1
Cl-7.1 & 7.3, Table 1 (Mo (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (N (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (B (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cu (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Nb (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ti (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (V (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Zr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Aluminium (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 2(C (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mn (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(S (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(P (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Si (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cu (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ni (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cr (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mo (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(V (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Nb (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ti (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(B (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Zr (SG Grades))	-	1000	-
Cl-7.2, Table 3 (i)(Carbon)	-	1000	-
Cl-7.2, Table 3 (ii)(Silicon)	-	1000	-
Cl-7.2, Table 3 (iii)(Manganese)	-	1000	-
Cl-7.2, Table 3 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table 3 (v)(Sulphur)	-	1000	-
Cl-7.2, Table 3 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table 3 (vii)(Niobium)	-	1000	-
Cl-7.2, Table 3 (viii)(Boron)	-	1000	-
Cl-7.2, Table 3 (ix)(Titanium)	-	1000	-
Cl-7.2, Table 3 (x)(Copper)	-	1000	-
Cl-7.2, Table 3 (xi)(Nickel)	-	1000	-
Cl-7.2, Table 3 (xii)(Chromium)	-	1000	-
Cl-7.2, Table 3 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table 3 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table 3 (xv)(Nitrogen)	-	1000	-
Cl-7.2, Table-4 (i)(Carbon)	-	1000	-
Cl-7.2, Table-4 (ii)(Silicon)	-	1000	-
Cl-7.2, Table-4 (iii)(Manganese)	-	1000	-
Cl-7.2, Table-4 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table-4 (v)(Sulphur)	-	1000	-
Cl-7.2, Table-4 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table-4 (vii)(Niobium)	-	1000	-
Cl-7.2, Table-4 (viii)(Boron)	-	1000	-
Cl-7.2, Table-4 (ix)(Titanium)	-	1000	-
Cl-7.2, Table-4 (x)(Copper)	-	1000	-
Cl-7.2, Table-4 (xi)(Nickel)	-	1000	-
Cl-7.2, Table-4 (xii)(Chromium)	-	1000	-
Cl-7.2, Table-4 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table-4 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table-4 (xv)(Nitrogen)	-	1000	-
Cl-7.3 & 7.4(Carbon Equivalent Value (CE))	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-≥3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 100 ≤ 125)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- ≥ 3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 100 ≤ 125 )	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Elongation A, Percentage Min at Gauge Length, Lo = 5.65√So- ≥ 3 ≤ 200)	-	1000	-
Cl-8.2(Location of Samples and Orientation of Test Pieces)	-	1000	-
Cl-8.3(Tensile Test Pieces)	-	1000	-
Cl-8.4(Tensile Test)	-	1000	-
Cl-9 & 9.4(Transverse Charpy V-notch properties a,c S Grades)	-	1000	-
Cl-9 & 9.4(Longitudinal Charpy V-notch properties SG Grades)	-	1000	-
Cl-9.1(Preparation of Impact Test Pieces (V-notch test))	-	1000	-
Cl-10.1(Weldability)	-	1000	-
Cl-10.2.1(Hot-Forming)	-	1000	-
Cl-10.2.2(Cold Formability)	-	1000	-
Cl-10.2.3(Flangeability)	-	1000	-
Cl-10.3(Hot-Dip Zinc-Coating)	-	1000	-
Cl-12.1(Re-Tests )	-	1000	-
Cl-12.2(Re-Heat Treatment)	-	1000	-
Cl-13(Freedom From Defect)	-	1000	-
Cl-14(Dimensions )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16(Calculation of Mass )	-	1000	-
Cl-18(Marking and Packing )	-	1000	-
Cl-4(General requirements)	-	1000	-
Cl-6(Manufacture )	-	1000	-
Cl-7.1(Ladle Analysis (Heat Analysis))	-	1000	-
Cl-7.1 & 7.3, Table 1 (C (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (Mn (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (S (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (P (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Si (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ni (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Mo (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (N (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (B (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cu (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Nb (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ti (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (V (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Zr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Aluminium (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 2(C (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mn (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(S (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(P (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Si (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cu (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ni (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cr (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mo (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(V (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Nb (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ti (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(B (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Zr (SG Grades))	-	1000	-
Cl-7.2, Table 3 (i)(Carbon)	-	1000	-
Cl-7.2, Table 3 (ii)(Silicon)	-	1000	-
Cl-7.2, Table 3 (iii)(Manganese)	-	1000	-
Cl-7.2, Table 3 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table 3 (v)(Sulphur)	-	1000	-
Cl-7.2, Table 3 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table 3 (vii)(Niobium)	-	1000	-
Cl-7.2, Table 3 (viii)(Boron)	-	1000	-
Cl-7.2, Table 3 (ix)(Titanium)	-	1000	-
Cl-7.2, Table 3 (x)(Copper)	-	1000	-
Cl-7.2, Table 3 (xi)(Nickel)	-	1000	-
Cl-7.2, Table 3 (xii)(Chromium)	-	1000	-
Cl-7.2, Table 3 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table 3 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table 3 (xv)(Nitrogen)	-	1000	-
Cl-7.2, Table-4 (i)(Carbon)	-	1000	-
Cl-7.2, Table-4 (ii)(Silicon)	-	1000	-
Cl-7.2, Table-4 (iii)(Manganese)	-	1000	-
Cl-7.2, Table-4 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table-4 (v)(Sulphur)	-	1000	-
Cl-7.2, Table-4 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table-4 (vii)(Niobium)	-	1000	-
Cl-7.2, Table-4 (viii)(Boron)	-	1000	-
Cl-7.2, Table-4 (ix)(Titanium)	-	1000	-
Cl-7.2, Table-4 (x)(Copper)	-	1000	-
Cl-7.2, Table-4 (xi)(Nickel)	-	1000	-
Cl-7.2, Table-4 (xii)(Chromium)	-	1000	-
Cl-7.2, Table-4 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table-4 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table-4 (xv)(Nitrogen)	-	1000	-
Cl-7.3 & 7.4(Carbon Equivalent Value (CE))	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-≥3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 100 ≤ 125)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- ≥ 3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 100 ≤ 125 )	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Elongation A, Percentage Min at Gauge Length, Lo = 5.65√So- ≥ 3 ≤ 200)	-	1000	-
Cl-8.2(Location of Samples and Orientation of Test Pieces)	-	1000	-
Cl-8.3(Tensile Test Pieces)	-	1000	-
Cl-8.4(Tensile Test)	-	1000	-
Cl-9 & 9.4(Transverse Charpy V-notch properties a,c S Grades)	-	1000	-
Cl-9 & 9.4(Longitudinal Charpy V-notch properties SG Grades)	-	1000	-
Cl-9.1(Preparation of Impact Test Pieces (V-notch test))	-	1000	-
Cl-10.1(Weldability)	-	1000	-
Cl-10.2.1(Hot-Forming)	-	1000	-
Cl-10.2.2(Cold Formability)	-	1000	-
Cl-10.2.3(Flangeability)	-	1000	-
Cl-10.3(Hot-Dip Zinc-Coating)	-	1000	-
Cl-12.1(Re-Tests )	-	1000	-
Cl-12.2(Re-Heat Treatment)	-	1000	-
Cl-13(Freedom From Defect)	-	1000	-
Cl-14(Dimensions )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16(Calculation of Mass )	-	1000	-
Cl-18(Marking and Packing )	-	1000	-
Cl-4(General requirements)	-	1000	-
Cl-6(Manufacture )	-	1000	-
Cl-7.1(Ladle Analysis (Heat Analysis))	-	1000	-
Cl-7.1 & 7.3, Table 1 (C (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (Mn (S Grades ))	-	1000	-
Cl-7.1 & 7.3, Table 1 (S (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (P (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Si (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ni (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Mo (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (N (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (B (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Cu (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Nb (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Ti (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (V (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Zr (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 1 (Aluminium (S Grades) )	-	1000	-
Cl-7.1 & 7.3, Table 2(C (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mn (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(S (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(P (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Si (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cu (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ni (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Cr (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Mo (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(V (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Nb (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Ti (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(B (SG Grades))	-	1000	-
Cl-7.1 & 7.3, Table 2(Zr (SG Grades))	-	1000	-
Cl-7.2, Table 3 (i)(Carbon)	-	1000	-
Cl-7.2, Table 3 (ii)(Silicon)	-	1000	-
Cl-7.2, Table 3 (iii)(Manganese)	-	1000	-
Cl-7.2, Table 3 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table 3 (v)(Sulphur)	-	1000	-
Cl-7.2, Table 3 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table 3 (vii)(Niobium)	-	1000	-
Cl-7.2, Table 3 (viii)(Boron)	-	1000	-
Cl-7.2, Table 3 (ix)(Titanium)	-	1000	-
Cl-7.2, Table 3 (x)(Copper)	-	1000	-
Cl-7.2, Table 3 (xi)(Nickel)	-	1000	-
Cl-7.2, Table 3 (xii)(Chromium)	-	1000	-
Cl-7.2, Table 3 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table 3 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table 3 (xv)(Nitrogen)	-	1000	-
Cl-7.2, Table-4 (i)(Carbon)	-	1000	-
Cl-7.2, Table-4 (ii)(Silicon)	-	1000	-
Cl-7.2, Table-4 (iii)(Manganese)	-	1000	-
Cl-7.2, Table-4 (iv)(Phosphorus)	-	1000	-
Cl-7.2, Table-4 (v)(Sulphur)	-	1000	-
Cl-7.2, Table-4 (vi)(Vanadium)	-	1000	-
Cl-7.2, Table-4 (vii)(Niobium)	-	1000	-
Cl-7.2, Table-4 (viii)(Boron)	-	1000	-
Cl-7.2, Table-4 (ix)(Titanium)	-	1000	-
Cl-7.2, Table-4 (x)(Copper)	-	1000	-
Cl-7.2, Table-4 (xi)(Nickel)	-	1000	-
Cl-7.2, Table-4 (xii)(Chromium)	-	1000	-
Cl-7.2, Table-4 (xiii)(Molybdenum)	-	1000	-
Cl-7.2, Table-4 (xiv)(Zirconium)	-	1000	-
Cl-7.2, Table-4 (xv)(Nitrogen)	-	1000	-
Cl-7.3 & 7.4(Carbon Equivalent Value (CE))	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-≥3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 100 ≤ 125)	-	1000	-
Cl-8.1 & 8.4, Table 7(Minimum Yield Strength ReH, MPa Nominal Thickness,-> 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- ≥ 3 ≤ 50)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 50 ≤ 100)	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 100 ≤ 125 )	-	1000	-
Cl-8.1 & 8.4, Table 7(Tensile Strength Rm , MPa Nominal Thickness- > 125 ≤ 200)	-	1000	-
Cl-8.1 & 8.4, Table 7(Elongation A, Percentage Min at Gauge Length, Lo = 5.65√So- ≥ 3 ≤ 200)	-	1000	-
Cl-8.2(Location of Samples and Orientation of Test Pieces)	-	1000	-
Cl-8.3(Tensile Test Pieces)	-	1000	-
Cl-8.4(Tensile Test)	-	1000	-
Cl-9 & 9.4(Transverse Charpy V-notch properties a,c S Grades)	-	1000	-
Cl-9 & 9.4(Longitudinal Charpy V-notch properties SG Grades)	-	1000	-
Cl-9.1(Preparation of Impact Test Pieces (V-notch test))	-	1000	-
Cl-10.1(Weldability)	-	1000	-
Cl-10.2.1(Hot-Forming)	-	1000	-
Cl-10.2.2(Cold Formability)	-	1000	-
Cl-10.2.3(Flangeability)	-	1000	-
Cl-10.3(Hot-Dip Zinc-Coating)	-	1000	-
Cl-12.1(Re-Tests )	-	1000	-
Cl-12.2(Re-Heat Treatment)	-	1000	-
Cl-13(Freedom From Defect)	-	1000	-
Cl-14(Dimensions )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16(Calculation of Mass )	-	1000	-
Cl-18(Marking and Packing )	-	1000	-

-
-

694

Dashmesh Test Lab Private Limited

8186926

IS 16544 (2016)

All glass evacuated tubes solar water heating system

ALL TYPE

68500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	10000	5 % Discount for BIS
6.2.1 (Annex - B)(Exterior Test)	-	4000	5 % Discount for BIS
6.2.2 (Annex - C)(Leakage Test)	-	5000	5 % Discount for BIS
6.2.3 (Annex - D)(Stagnation Test)	-	6000	5 % Discount for BIS
6.2.4 (Annex - E)(External Thermal Shock Test)	-	10000	5 % Discount for BIS
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	5 % Discount for BIS
6.2.6(Thermal Performance Test)	-	14000	5 % Discount for BIS
6.2.7()	-	1000	5 % Discount for BIS
5(General Requirements)	-	10000	5 % Discount for BIS

22 Jul, 2028

-
INCLUDED W.E.F 09.06.2026

695

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	0	-
Clause no.6(FREEDOM FROM DEFECTS)	-	5000	-
Clause no.7(CONDITION OF SUPPLY)	-	0	-
Clause no.8(CHEMICAL COMPOSITION)	-	5000	-
Clause no.9.1, table no,1(" tensile test ")	-	5000	-
Clause no.9.2(Bend test)	-	5000	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	5000	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	5000	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	5000	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	5000	-
Clause no. 13(packing)	-	0	-
Clause no. 14(Marking)	-	0	-

-
Included w.e.f-12.06.2026.

696

Dashmesh Test Lab Private Limited

8186926

IS 16542 (2016)

Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification

ALL TYPE

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Ideal Heating Test)	-	2000	5 % Discount for BIS
8.2(Leakage Test)	-	1000	5 % Discount for BIS
8.4(Integral Test)	-	2000	5 % Discount for BIS
8.5(Performance Test)	-	2000	5 % Discount for BIS
7.6(Thermal Shock Test for Inner Sealing)	-	1000	5 % Discount for BIS
7.7(Thermal Shock Test for outer Sealing)	-	1000	5 % Discount for BIS
6(GENERAL REQUIREMENTS)	-	500	5 % Discount for BIS
8.1(Measurement of Storage Water Tank Capacity)	-	500	5 % Discount for BIS

22 Jul, 2028

-
INCLUDED W.E.F 09.06.2026

697

Dashmesh Test Lab Private Limited

8186926

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

ALL TYPE OF EVACUATED TUBES

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	500	5 % Discount for BIS
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	500	5 % Discount for BIS
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	500	5 % Discount for BIS
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	500	5 % Discount for BIS
Cl 4.2 & table 1(Tube Length)	-	500	5 % Discount for BIS
Cl 4.2 & table 1(Sealed off Part Length)	-	499.98	5 % Discount for BIS
Cl 4.3(Absorber Area for Different Tube Sizes)	-	500	5 % Discount for BIS
Cl 4.4(Solar Selective Absorbing Coating)	-	500	5 % Discount for BIS
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	1000	5 % Discount for BIS
Cl 5.1.1(Transmittance ratio ( material))	-	1000	5 % Discount for BIS
Cl 5.1.2(Bubble & crack (material))	-	1000	5 % Discount for BIS
Cl 5.1.3(Knots (material))	-	999.99	5 % Discount for BIS
Cl 5.1.4(Solar absorbing ratio (material))	-	1000	5 % Discount for BIS
Cl 5.2.1(Scratch length and visibility)	-	500	5 % Discount for BIS
Cl 5.2.2(Appearance of selective coating)	-	500	5 % Discount for BIS
Cl 5.2.3(Colour fading area)	-	500	5 % Discount for BIS
Cl 5.2.4(Strut member)	-	500	5 % Discount for BIS
Cl 5.2.5(The inner and cover tube at the open end)	-	500	5 % Discount for BIS
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	500	5 % Discount for BIS
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	500	5 % Discount for BIS
Cl 5.2.8(Cross-section of the open end)	-	500	5 % Discount for BIS
Cl 5.2.9(Sealed end)	-	500	5 % Discount for BIS
Cl 7.2.2(Uniformity)	-	1500	5 % Discount for BIS
Cl 7.4(Stagnation Performance Parameter Test)	-	2500	5 % Discount for BIS
Cl 7.5(Stagnation Solar Irradiation Test)	-	2500	5 % Discount for BIS
Cl 7.6(Average Heat Loss Coefficient Test)	-	2500	5 % Discount for BIS
Cl 7.7(Vacuum Performance Test)	-	3000	5 % Discount for BIS
Cl 7.8(Resistance to Thermal Shock Test)	-	3000	5 % Discount for BIS
Cl 7.9(Resistance to Impact Test)	-	500	5 % Discount for BIS
Cl 7.10(0 Resistance to Internal Pressure Test)	-	2500	5 % Discount for BIS
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	3000	5 % Discount for BIS
Cl 9(Marking)	-	500	5 % Discount for BIS

22 Jul, 2028

-
INCLUDED W.E.F 09.06.2026

698

Stellar Test House, Noida

8171606

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

All Grade / Type / Size / Designation

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grade)	-	0	-
3(Type/Shape of Cover)	-	0	-
4.4(Reinforcement)	-	0	-
4.4(Reinforcement)	-	0	-
4.5(Steel Fibres - Diameter / equivalent diameterofsteel tibres)	-	0	-
4.5(Steel Fibres - The aspect ratio of the tibres)	-	0	-
5.2 and Table 1(Dimensions of Frame - A)	-	500	-
5.2 and Table 1(Dimensions of Frame - B)	-	500	-
5.2 and Table 1(Dimensions of Frame - C)	-	500	-
5.2 and Table 1(Dimensions of Frame - D)	-	500	-
5.2 and Table 1(Dimensions of Frame - E)	-	500	-
5.2 and Table 1(Dimensions of Frame - F)	-	500	-
5.2(Dimensions of cover- Diameter)	-	0	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	500	-
5.2(Top surface ofthe frame and cover is in level)	-	0	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	200	-
5.2 and Fig 1(Clear cover to reinforcement)	-	200	-
5.2 and Fig 1(Distance of housing from the edge)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.1(Edge Protection and Finishing - Frame)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
7.4.2(Edge Protection and Finishing - Cover)	-	200	-
8(LIFTING HOOKS)	-	500	-
8(LIFTING HOOKS)	-	0	-
9.1(General)	-	0	-
9.3 and Table and Annex C(Load Test)	-	5000	-
Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover)	-	0	-
Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel)	-	0	-
Clause No. 9.3 Annex C(Cracks at bottom side of the cover )	-	0	-
Clause No. 9.3 Annex C(Permanent set of cover)	-	1000	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load)	-	0	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load)	-	0	-
Clause No. 8(Lifting Device)	-	0	-
Clause No. 8(Lifting Hooks (Diameter of MS rod))	-	500	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	500	-
Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface))	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors))	-	200	-
Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat))	-	200	-
Clause No. 6(Design)	-	0	-

26 Sep, 2028

-
Included w.e.f-06.08.2026

699

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 2062 (Part 1) (2025)

Structural Steel - Part 1 - Hot Rolled Medium and High tensile Steel

Hot Rolled Medium & High Tensile

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(MANUFACTURE)	-	1000	-
Cl-7(FREEDOM FROM DEFECTS)	-	1000	-
Cl-8.1(Ladle Analysis)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis-C)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- S)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- P)	-	1000	-
Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si )	-	1000	-
Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max)	-	1000	-
Cl-8.1 & 8.2, Note-1(Total aluminium)	-	1000	-
Cl-8.1 & 8.2, Note-5(Nb)	-	1000	-
Cl-8.1 & 8.2, Note-5(V)	-	1000	-
Cl-8.1 & 8.2, Note-5(Ti)	-	1000	-
Cl-8.1 & 8.2, Note-6(B)	-	1000	-
Cl-8.2, Table 2 (i)(Carbon)	-	1000	-
Cl-8.2, Table 2 (ii)(Manganese)	-	1000	-
Cl-8.2, Table 2 (iii)(Sulphur)	-	1000	-
Cl-8.2, Table 2 (iv)(Phosphorus)	-	1000	-
Cl-8.2, Table 2 (v)(Silicon)	-	1000	-
Cl-8.2, Table 2 (vi)(Copper)	-	1000	-
Cl-8.2, Table 2 (vii)(Vanadium)	-	1000	-
Cl-8.2, Table 2 (viii)(Niobium)	-	1000	-
Cl-8.2, Table 2 (ix)(Titanium)	-	1000	-
Cl-8.2, Table 2 (x)(Nitrogen)	-	1000	-
Cl-10.1(Number of Tensile Tests)	-	1000	-
Cl-10.2(Tensile Test Pieces)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C)	-	1000	-
Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J)	-	1000	-
Cl-11.1(Number of Bend Tests)	-	1000	-
Cl-11.2(Bend Test Piece)	-	1000	-
Cl-11.3(Bend Test )	-	1000	-
Cl-12(Impact Test )	-	1000	-
Cl-14, Table-4 (i)(Beam, column, channel and angle sections including parallel beam and column sections)	-	1000	-
Cl-14, Table-4 (ii)(Tee bars)	-	1000	-
Cl-14, Table-4 (iii)(Bulb angles)	-	1000	-
Cl-14, Table-4 (iv)(Plates, sheets, strips and flats)	-	1000	-
Cl-14, Table-4 (vi)(Round and square bars)	-	1000	-
Cl-14, Table-4 (vii)(Bulb flats)	-	1000	-
Cl-14, Table-4 (viii)(Sheet piling sections)	-	1000	-
Cl-14, Table-4 (ix)(Channel sections)	-	1000	-
Cl-13(Other TestsNondestructive testing, Metallurgical tests )	-	1000	-
Cl-13.3(Strength of joint )	-	1000	-
Cl-15(Tolerances)	-	1000	-
Cl-16.1(Retests)	-	1000	-
Cl-16.2(Re-heat Treatment)	-	1000	-

-
Included w.e.f 19.05.2026

700

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	3000	-
Cl-7(Marking and instructions)	-	3000	-
Cl-8(Protection against access to live parts)	-	3000	-
Cl-10(Power input and current)	-	3000	-
Cl-11(Heating)	-	3000	-
Cl-12(Charging of metal-ion batteries)	-	3000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	3000	-
Cl-14(Transient overvoltages)	-	3000	-
Cl-15(Moisture resistance)	-	3000	-
Cl-16(Leakage current and electric strength)	-	3000	-
Cl-17(Overload protection of transformers and associated circuits)	-	3000	-
Cl-18(Endurance)	-	3000	-
Cl-19(Abnormal operation)	-	3000	-
Cl-20(Stability and mechanical hazards)	-	3000	-
Cl-21(Mechanical strength)	-	3000	-
Cl-22(Construction)	-	3000	-
Cl-23(Internal wiring)	-	3000	-
Cl-24(Components)	-	3000	-
Cl-25(Supply connection and external flexible cords)	-	3000	-
Cl-26(Terminals for external conductors)	-	3000	-
Cl-27(Provision for earthing)	-	3000	-
Cl-28(Screws and connections)	-	3000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	3000	-
Cl-30(Resistance to heat and fire)	-	3000	-
Cl-31(Resistance to rusting)	-	3000	-
Cl-32(Radiation, toxicity and similar hazards)	-	3000	-

20 Jun, 2029

-
Included w.e.f-20.08.2026 "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics)"

701

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1470 (2025)

Silicomanganese Specification ( Fifth Revision )

9750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	1500	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	1500	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	1500	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	1500	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	1500	Cumulative for Aluminium , Titanium and Boron
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	0	Cumulative for Aluminium , Titanium and Boron
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	0	Cumulative for Aluminium , Titanium and Boron
Clause. 8.1(Partical size)	-	250	-
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	0	-
Clause. 8.1(Partical size)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	0	-
Clause. 8.1(Partical size)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	-	-
Clause. 8.1(Partical size)	-	-	-

-
included w.e.f 22.07.2026

702

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

8196926

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	2000	-
Cl-1.6(Marking)	-	5000	-
Cl-1.7(Construction)	-	20000	-
Cl-1.8(Creepage distances and clearances)	-	5000	-
Cl-1.9(Provision for earthing)	-	5000	-
Cl-1.10(Terminals)	-	5000	-
Cl-1.11(External and internal wiring)	-	10000	-
Cl-1.12(Protection against electric shock)	-	5000	-
Cl-1.12(Protection against electric shock)	-	5000	-
Cl-1.13(Endurance tests and thermal tests)	-	20000	-
Cl-1.14(Resistance to dust, solid objects and moistur)	-	10000	-
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	5000	-
Cl-1.16(Resistance to heat, fire and tracking)	-	10000	-

-
Included w.e.f-18.06.2026 Cl-1.7 (Construction) Photobiological Hazard

703

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 16103 : Part 1 (2025)

LED Modules for General Lighting Part 1 Safety Specifications (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Marking)	-	5000	-
Cl-7.1(Integral terminals)	-	5000	-
Cl-7.2(Terminals other than integral terminals)	-	5000	-
Cl-8(Earthing)	-	5000	-
Cl-9(Protection against accidental contact with live parts)	-	5000	-
Cl-10(Moisture resistance and insulation)	-	10000	-
Cl-11(Electric strength)	-	5000	-
Cl-12.1(Fault conditions- General)	-	15000	-
Cl-12.2(Overpower condition)	-	10000	-
Cl-13(Conformity testing during manufacture)	-	5000	-
Cl-15(Creepage distances and clearances)	-	5000	-
Cl-16(Screws, current-carrying parts and connections)	-	5000	-
Cl-17(Resistance to heat, fire and tracking)	-	10000	-
Cl-18(Resistance to corrosion)	-	10000	-
Cl-19(Information for luminaire design)	-	5000	-
Cl-20.1(Heat management- General)	-	10000	-
Cl-20.2(Thermal interface material)	-	10000	-
Cl-20.3(Heat protection)	-	10000	-

31 Dec, 2029

-
included w.e.f 23.06.2026 Cl-21.1 (UV radiation) Cl-21.2 (Blue light hazard)

704

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 10748 (2025)

Hot-Rolled Steel Strip for Welded Tubes and Pipes - Specification ( Third Revision)

(Mechanical : ISH 275H, ISH 355H, ISH 420H and ISH 460H) (Chemical : 8C3, 10C4, 20C4, 21C3, 26C8, 30C8, 35C8, 40C8, 20C12, 26C13, 30C14, 36C14, 38C14, 41C15, 43C15, 20C12B, 22C12B, 26C13B, 30C13B, 34C13B).)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of Materials)	-	1000	-
Cl-6(Manufacture)	-	0	-
Cl-7.1(Ladle Analysis)	-	1500	-
Cl-7.2(Product Analysis)	-	1000	-
Cl-7.3(Carbon Equivalent Value)	-	1500	-
Cl-8.1(Number of Tensile Tests)	-	1000	-
Cl-8.3(Tensile Test)	-	1000	-
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	1000	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	1000	-
Cl-8.3, Table-5 & 6(Internal Diameter of Bend)	-	1000	-
Cl-9.1(Number of Bend Tests)	-	1000	-
Cl-9.2(Bend test)	-	1000	-
Cl-10(Re- Tests)	-	2000	-
Cl-11(freedam from Defects)	-	2000	-
Cl-12(Dimensions)	-	1000	-
Cl-13(Tolerances)	-	1000	-
Cl-14(Calculation of Mass)	-	500	-
Cl-16(Marking)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(total aluminium)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	1500	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	1000	-
Cl-8.2(Tensile Test Pieces)	-	1000	-

-
Included w.e.f. 04.06.2026

705

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	-
8(Protection against accidental contact with live parts)	-	5000	-
9(Terminals)	-	5000	-
10(PROVISION FOR EARTHING)	-	5000	-
11(MOISTURE RESISTANCE)	-	5000	-
12(Electric Strength)	-	5000	-
13(Thermal endurance test for winding of ballasts)	-	10000	-
14(Fault conditions)	-	10000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	10000	-
17(Creepage distance and clearances)	-	5000	-
18(Screws, current carrying parts and connections)	-	5000	-
19(Resistance to heat, fire and tracking)	-	10000	-
20(Resistance to corrosion)	-	10000	-
7(Marking)	-	5000	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	5000	-
9(TERMINALS)	-	5000	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	5000	-
11(MOISTURE RESISTANCE AND INSULATION)	-	10000	-
12(ELECTRIC STRENGTH)	-	5000	-
14(FAULT CONDITIONS)	-	10000	-
15(TRANSFORMER HEATING)	-	5000	-
16(CONSTRUCTION)	-	10000	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	5000	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	5000	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	10000	-
20(RESISTANCE TO CORROSION)	-	10000	-
4(GENERAL REQUIREMENTS)	-	2000	-
5(GENERAL NOTES ON TESTS)	-	2000	-
6(CLASSIFICATION)	-	2000	-
16(Enclosures)	-	5000	-
19(Terminals)	-	5000	-

31 Dec, 2029

-
Included w.e.f 17.08.2026 Exclusion : 16 (Bridging resistor in primary circuit) 16 (Capacitor and RC units) 16 (Connector) 16 (EMI/EMC filter) 16 (Fuse) 16 (Heat shrinkage sleeve) 16 (Inductor) 16 (Insulated tape) 16 (Internal wire) 16 (LED) 16 (MOV/VDR) 16 (Opto-coupler) 16 (PCB material) 16 (RF suppression (X-Y capacitors)) 16 (SMPS/Mains Transformer) 16 (Thin sheet materials) 16 (Winding wire) 19 (Bobbin) 19 (Metal base PCB for LED) 19 (Transparent cover)

706

BIS, Northern Regional Laboratory (NRL)

None

IS 2593 (2023)

Flexible Cables for Miners' Cap Lamps - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3 (Conductor)	-
Clause 3.1.2 (resistance of conductor)	-
Clause 4 (Insulation)	-
Clause 5 (Center Strain cord)	-
Clause 6 (Sheath)	-
Clause 7 (Nominal cross-sectional area of conductor)	-
Clause 8.1 (Thickness of Insulation)	-
Clasue -9 (Identification of Cores)	-
Clause 10 (Laying Up)	-
Clasue -11.2 (Thickness of Sheath)	-
Clause 12 (overall diameter)	-
Clause 13.1 (b) (Annealing test)	-
Clause 13.1 (c) (Conductor resistance test)	-
Clause 13.1 (d) (Test for thickness of insulation and sheath)	-
Clause 13.1 (e) (1) (Tensile strength and elongation at break)	-
Clause 13.1 (e) (2) (Ageing in air oven)	-
Clause 13.1 (e) (3) (Ageing in oxygen bomb (for insulation)/air bomb (for sheath)	-
Clause 13.1 (e) (4) (Oil resistance test)	-
Clause 14.1 (Voltage Test)	-
Clause 14.2 (Flammability Test)	-
Clause 14.3.1 (Test for Breaking Load)	-
Clause 14.4 (Checking of Overall Diameter)	-
Clause 15 (Manufacturer)	-
Clause 16 (Marking)	-

-
Complete for electrical parameters

707

UL India Private limited, Gurgaon

8127226

IS 18689 (2024)

Household and Similar Electrical Appliances - Safety - Particular Requirements for Commercial Refrigerating Appliances and Ice-Makers with an Incorporated or Remote Refrigerant Unit or Motor-Compressor (IEC 60335-2-89 : 2019, MOD)

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	4000	-
10(Power input and current)	-	15000	-
10.101(Power input and current)	-	5000	-
11(Heating)	-	30000	-
13.1 &13.2(Leakage current test)	-	2500	-
13.1 &13.3(Electric strength test)	-	2500	-
14(Transient overvoltages)	-	10000	-
15(Moisture resistance)	-	35000	-
16.1 &16.2(Leakage current test)	-	2500	-
16.1 & 16.3(Electric strength test)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
19(Abnormal operation)	-	25000	-
19.101(Abnormal operation)	-	3000	-
19.102(Abnormal operation)	-	4000	-
19.103(Abnormal operation)	-	4000	-
20(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	1200	-
21.102(Mechanical strength)	-	1200	-
21.101(Mechanical strength)	-	1200	-
21.103(Mechanical strength)	-	1200	-
22(Construction)	-	9200	-
23(Internal wiring)	-	2500	-
25("Supply connection and external flexible cords")	-	2500	-
26("Terminals for external conductors")	-	2500	-
27(Provision for earthing)	-	2500	-
28(Screws and connections)	-	3500	-
29("Clearances, creepage distances and solid insulation")	-	7000	-
30("Resistance to heat and fire ")	-	7000	-
31(Resistance to rusting)	-	1000	-
15.101,15.102,15.103(Moisture resistance)	-	5000	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10.101(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
19.102(Abnormal operation)	-	0	-
19.103(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30("Resistance to heat and fire ")	-	0	-
31(Resistance to rusting)	-	0	-
15.101,15.102,15.103(Moisture resistance)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10.101(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
19.102(Abnormal operation)	-	0	-
19.103(Abnormal operation)	-	0	-
20(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.102(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
21.103(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30("Resistance to heat and fire ")	-	0	-
31(Resistance to rusting)	-	0	-
15.101,15.102,15.103(Moisture resistance)	-	0	-

07 Aug, 2028

-
Included w.e.f. 11.08.2026

708

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 1470 (2025)

Silicomanganese Specification ( Fifth Revision )

ALL

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	2000	-
Clause. 8.1(Partical size)	-	2000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	0	-
Clause. 8.1(Partical size)	-	0	-
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	-	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	-	-
Clause. 8.1(Partical size)	-	-	-

-
Included w.e.f 11.08.2026

709

BIS, Central Laboratory (CL)

None

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Dimensions)	-
5 - Table 5 (i) (General requirements)	-
5 - Table 5 (ii) (Thread)	-
5 - Table 5 (iii) (Mechanical properties)	-
5 - Table 5 (v) (Surface condition)	-
5 - Table 5 (vi) (Surface integrity)	-
5 - Table 5 (vii) (Acceptability)	-
6 (Marking and labelling)	-
7 (Designation)	-

-
-

710

BIS, Southern Regional Laboratory (SRL)

None

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test)	-
4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test)	-
4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-
4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms)	-

-
Tests for Safety of toys: Part 3 migration of certain elements (Second Revision) as per IS 9873 : Part 3 (2017) are available Except for following tests: 5.6 Test for Pre-school play figures 5.11.2 Length of cords and electrical cables 5.11.5 Self-retracting cords 5.13 Test for closures and toy chest lids 5.24.3 Tip-over test for large and bulky toys 5.24.6 Tension test 5.25 Determination of sound pressure levels 5.27 Dynamic strength for toy scooters 5.31 Tension test for magnets 5.32 Magnetic flux index Quantity: 3-10 based on the sample

711

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6911 (2026)

STAINLESS STEEL PLATE, SHEET AND STRIP - SPECIFICATION (Third revision)

from 0.40 mm thickness onwards

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-5.3(Raw material)	-	0	-
Cl-6(Freedom from Defects)	-	100	-
Cl-8.1(Austenitic and duplex stainless steels)	-	0	-
Cl-8.2(Ferritic and martensitic stainless steels)	-	0	-
Cl-8.3(Heat-treated)	-	0	-
Cl-8.4 & 14.2(Recommended Heat Treatment for Stainless Steels)	-	0	-
Cl-10.1(Tensile Test)	-	1500	-
Cl-10.2(Hardness Test)	-	1500.02	-
Cl-10.3(Bend test)	-	1500	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max-Brinell HBS/HBW)	-	1500.01	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Rockwell HRB)	-	1499.99	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Vickers Load (1 kg to 30 kg))	-	1500	-
Cl-10.4 & cl-10.3.2 Table-4(Yield Strength Min, Mpa 0.2 Percent Proof Stress)	-	1499.98	-
Cl-10.4 & cl-10.3.2 Table-4(Tensile Strength Min, MPa)	-	1499.99	-
Cl-10.4 & cl-10.3.2 Table-4(Elongation Percent Min)	-	1500	-
Cl-10.4 & cl-10.3.2 Table-4(Bend Test Dma)	-	1499.98	-
Cl-11(ERICHSEN CUPPING TEST)	-	1500	-
Cl-11.3, Table 5(Erichsen Values-Thickness)	-	1500	-
Cl-11.3, Table 5(Erichsen Values-Depth of Cup, Min)	-	1500.02	-
Cl-15(Surface Finish)	-	0	-
Cl-14.2(Retest for Mechanical Properties)	-	0	-
Cl-17(Dimensions and Tolerances)	-	1000	-
Cl-7.1, 7.2 & 14.1, Table 1(C)	-	349.98	-
Cl-7.2, 9.2.1 Table 2 (i)(C)	-	349.98	-
Cl-7.1, 7.2 & 14.1, Table 1(Si)	-	350	-
Cl-7.2, 9.2.1Table 2 (ii)(Si)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Mn)	-	350	-
Cl-7.2, 9.2.1 Table 2 (iii)(Mn)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Ni)	-	350	-
Cl-7.2, 9.2.1 Table 2 (vii)(Ni)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Cr)	-	350	-
Cl-7.2, 9.2.1 Table 2 (v)(Cr)	-	350	-
Cl-7.2, 9.2.1 Table 2 (iv)(Al)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Mo)	-	350	-
Cl-7.2, 9.2.1 Table 2 (vi)(Mo)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(S)	-	350	-
Cl-7.2, 9.2.1Table 2 (xi)(S)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(P)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xii)(P)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(N)	-	1000	-
Cl-7.2, 9.2.1 Table 2 (viii)(N)	-	1000	-
Cl-7.1, 7.2 & 14.1, Table 1(Cu)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xiv)(Cu)	-	350	-
Cl-7.2, 9.2.1Table 2 (ix)(Ti)	-	350	-
Cl-7.2, 9.2.1 Table 2 (x)(Nb)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xiii)(Ta)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xv)(V)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xvi)(W)	-	350	-
Cl-12(corrosion resistance)	-	10000	-
Cl-14.1(Retests for Chemical Analysis)	-	0	-
Cl-19(Marking)	-	0	-
Cl-4.1(General requirements)	-	0	-
Cl-5(Manufacture)	-	0	-
Cl-5.3(Raw material)	-	25000	Separate testing charges require
Cl-6(Freedom from Defects)	-	500	-
Cl-8.1(Austenitic and duplex stainless steels)	-	0	-
Cl-8.2(Ferritic and martensitic stainless steels)	-	0	-
Cl-8.3(Heat-treated)	-	0	-
Cl-8.4 & 14.2(Recommended Heat Treatment for Stainless Steels)	-	0	-
Cl-10.1(Tensile Test)	-	999.97	-
Cl-10.2(Hardness Test)	-	1500	-
Cl-10.3(Bend test)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max-Brinell HBS/HBW)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Rockwell HRB)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Vickers Load (1 kg to 30 kg))	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Yield Strength Min, Mpa 0.2 Percent Proof Stress)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Tensile Strength Min, MPa)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Elongation Percent Min)	-	1000	-
Cl-10.4 & cl-10.3.2 Table-4(Bend Test Dma)	-	1000	-
Cl-11(ERICHSEN CUPPING TEST)	-	2000	-
Cl-11.3, Table 5(Erichsen Values-Thickness)	-	2000	-
Cl-11.3, Table 5(Erichsen Values-Depth of Cup, Min)	-	2000	-
Cl-15(Surface Finish)	-	500	-
Cl-14.2(Retest for Mechanical Properties)	-	0	-
Cl-17(Dimensions and Tolerances)	-	500	-
Cl-7.1, 7.2 & 14.1, Table 1(C)	-	350	-
Cl-7.2, 9.2.1 Table 2 (i)(C)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Si)	-	350	-
Cl-7.2, 9.2.1Table 2 (ii)(Si)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Mn)	-	350	-
Cl-7.2, 9.2.1 Table 2 (iii)(Mn)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Ni)	-	350	-
Cl-7.2, 9.2.1 Table 2 (vii)(Ni)	-	0	-
Cl-7.1, 7.2 & 14.1, Table 1(Cr)	-	350	-
Cl-7.2, 9.2.1 Table 2 (v)(Cr)	-	350	-
Cl-7.2, 9.2.1 Table 2 (iv)(Al)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(Mo)	-	350	-
Cl-7.2, 9.2.1 Table 2 (vi)(Mo)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(S)	-	350	-
Cl-7.2, 9.2.1Table 2 (xi)(S)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(P)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xii)(P)	-	350	-
Cl-7.1, 7.2 & 14.1, Table 1(N)	-	1000	-
Cl-7.2, 9.2.1 Table 2 (viii)(N)	-	1000	-
Cl-7.1, 7.2 & 14.1, Table 1(Cu)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xiv)(Cu)	-	350	-
Cl-7.2, 9.2.1Table 2 (ix)(Ti)	-	350	-
Cl-7.2, 9.2.1 Table 2 (x)(Nb)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xiii)(Ta)	-	1000	-
Cl-7.2, 9.2.1 Table 2 (xv)(V)	-	350	-
Cl-7.2, 9.2.1 Table 2 (xvi)(W)	-	350	-
Cl-12(corrosion resistance)	-	10000	-
Cl-14.1(Retests for Chemical Analysis)	-	0	-
Cl-19(Marking)	-	0	-
Cl-4.1(General requirements)	-	-	-
Cl-5(Manufacture)	-	-	-
Cl-5.3(Raw material)	-	-	-
Cl-6(Freedom from Defects)	-	-	-
Cl-8.1(Austenitic and duplex stainless steels)	-	-	-
Cl-8.2(Ferritic and martensitic stainless steels)	-	-	-
Cl-8.3(Heat-treated)	-	-	-
Cl-8.4 & 14.2(Recommended Heat Treatment for Stainless Steels)	-	-	-
Cl-10.1(Tensile Test)	-	-	-
Cl-10.2(Hardness Test)	-	-	-
Cl-10.3(Bend test)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max-Brinell HBS/HBW)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Rockwell HRB)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Hardness, Max- Vickers Load (1 kg to 30 kg))	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Yield Strength Min, Mpa 0.2 Percent Proof Stress)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Tensile Strength Min, MPa)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Elongation Percent Min)	-	-	-
Cl-10.4 & cl-10.3.2 Table-4(Bend Test Dma)	-	-	-
Cl-11(ERICHSEN CUPPING TEST)	-	-	-
Cl-11.3, Table 5(Erichsen Values-Thickness)	-	-	-
Cl-11.3, Table 5(Erichsen Values-Depth of Cup, Min)	-	-	-
Cl-15(Surface Finish)	-	-	-
Cl-14.2(Retest for Mechanical Properties)	-	-	-
Cl-17(Dimensions and Tolerances)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(C)	-	-	-
Cl-7.2, 9.2.1 Table 2 (i)(C)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Si)	-	-	-
Cl-7.2, 9.2.1Table 2 (ii)(Si)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Mn)	-	-	-
Cl-7.2, 9.2.1 Table 2 (iii)(Mn)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Ni)	-	-	-
Cl-7.2, 9.2.1 Table 2 (vii)(Ni)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Cr)	-	-	-
Cl-7.2, 9.2.1 Table 2 (v)(Cr)	-	-	-
Cl-7.2, 9.2.1 Table 2 (iv)(Al)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Mo)	-	-	-
Cl-7.2, 9.2.1 Table 2 (vi)(Mo)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(S)	-	-	-
Cl-7.2, 9.2.1Table 2 (xi)(S)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(P)	-	-	-
Cl-7.2, 9.2.1 Table 2 (xii)(P)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(N)	-	-	-
Cl-7.2, 9.2.1 Table 2 (viii)(N)	-	-	-
Cl-7.1, 7.2 & 14.1, Table 1(Cu)	-	-	-
Cl-7.2, 9.2.1 Table 2 (xiv)(Cu)	-	-	-
Cl-7.2, 9.2.1Table 2 (ix)(Ti)	-	-	-
Cl-7.2, 9.2.1 Table 2 (x)(Nb)	-	-	-
Cl-7.2, 9.2.1 Table 2 (xiii)(Ta)	-	-	-
Cl-7.2, 9.2.1 Table 2 (xv)(V)	-	-	-
Cl-7.2, 9.2.1 Table 2 (xvi)(W)	-	-	-
Cl-12(corrosion resistance)	-	-	-
Cl-14.1(Retests for Chemical Analysis)	-	-	-
Cl-19(Marking)	-	-	-

18 Dec, 2027

-
Included w.e.f. 02.07.2026

712

BIS, Northern Regional Laboratory (NRL)

None

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Copper Conductor)	-
Cl-4.2 (Aluminum Conductor)	-
Cl-6.1 (Proofed Tape)	-
Cl-6.2 ("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-
Cl-6.3 (Glass Tape)	-
Cl-7 (Fillers)	-
Cl-8.1 (Textile Braid)	-
Cl-8.2 (Glass Braid)	-
Cl-9.1 (General Service Insulated Cables and Flexible Cords)	-
Cl-9.2 (Heat Resisting Insulated Cables)	-
Cl-9.3 (Silicon Rubber Insulated Cable)	-
Cl-10.1 (Preservative Compound)	-
Cl-10.2 (Varnish)	-
Cl-12 (separator tape)	-
Cl-14 (Core Identification)	-
Cl-18 (Laying UP of Cores)	-
Cl-19 (Binder Tape)	-
Cl-20.2 (Thickness of Sheath)	-
Cl-20.3 (Tolerance on Thickness of Sheath)	-
Cl-20.4 (Colour)	-
Cl-22.1 (i) (a) (Conductor resistance test)	-
Cl-22.1 (i) (b) (High voltage test or spark test.)	-
Cl-22.1 (ii) (a) (Annealing test (for copper);)	-
Cl-22.1 (ii) (b) (Tensile Test ((for aluminium);)	-
Cl-22.1 (ii) (c) (Wrapping test (for aluminium);)	-
Cl-22.1 (ii) (f) (Tensile strength and elongation at break of insulation and sheath)	-
Cl-22.1 (ii) (g) (Hot set test for insulation and sheath)	-
Cl-22.1 (ii) (h) (High voltage test)	-
Cl-22.1 (ii) (i) (Insulation resistance test)	-
Cl-22.1 (iii) (f) (Test for thickness of insulation and sheath and overall diameter)	-
Electrical (Tensile strength and elongation at break)	-
Cl-22.1 (iii) (g), 2 (Ageing in air oven)	-
Cl-22.1 (iii) (g), 3 (Ageing in air bomb)	-
Cl-22.1 (iii) (g), 4 (Ageing In oxygen bomb)	-
Cl-22.1 (iii) (g), 5 (Hot set)	-
Cl-22.1 (iii) (g), 6 (Oil resistance;)	-
Cl-22.1 (iii) (g), 7 (Tear resistance)	-
Cl-22.1 (iii) (i) (High voltage (water immersion) test;)	-
Cl-22.1 (iii) (j) (Flammability test)	-
Cl-24.1 (Manufacturer’s Identification)	-
Cl-25 (Packing and Morning)	-
CL. 22.1 (iv) a, (Flexing test for Cords for use with electric iron)	-

-
Excluding Cl.21.1 water absorption test (electrical) for IE2/IE3/IE4

713

UL India Private limited, Gurgaon

8127226

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

All Types

2800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	1500	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	1500	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	1500	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	1500	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	1500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	1500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	1500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	1500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	1500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	1500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	1500	-
4.4 -5.4(Toys intended to be entered by a child)	-	1500	-
4.4 -5.4(Toys intended to be entered by a child)	-	1500	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	1500	-
4.5 -5.5(Soft-filled toys)	-	1500	-
4.5 -5.5(Soft-filled toys)	-	1500	-

07 Aug, 2028

-
-

714

DELHI TEST HOUSE, Azadhpur

8131406

IS 14724 (2025)

ULTRAVIOLET BASED POINT OF USE WATER DISINFECTION SYSTEM FOR DRINKING PURPOSES SPECIFICATION

Wall Mounted/Tabletop Mounted/ Under The Counter Or Any OtherFor UV systems operating at 254 nm and for for UV systems operating other than 254 nm

50000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Inlet Port)	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-4.2( Method of Mounting)	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-4.5(Materials)	-	3000	TESTING CHARGES:- RS.-50000/-
Cl-4.6(Power Supply)	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-4.7(Maximum Rate of Flow)	-	2000	TESTING CHARGES:- RS.-50000/-
Cl-4.8(Indications and Protections)	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-5.1(Type Pressure Test (Hydrostatic Test))	-	2500	TESTING CHARGES:- RS.-50000/-
Cl-5.2(Routine Pressure Test (Pneumatic Test))	-	2500	TESTING CHARGES:- RS.-50000/-
Cl-5.3(Verification of Maximum Rate of Flow)	-	2500	TESTING CHARGES:- RS.-50000/-
Cl-5.4(Test for Microbiological Reduction )	-	0	TESTING CHARGES:- RS.-50000/-
Cl-5.4, Table 1 (i)(MS-2 coliphage (for UV systems operating at 254 nm)	-	15000	TESTING CHARGES:- RS.-50000/-
Cl-5.4, Table 1 (ii)(Q-β coliphage (for UV systems operating at wavelength other than 254 nm)	-	15000	TESTING CHARGES:- RS.-50000/-
Cl-5.5(Electrical Safety)	-	2000	TESTING CHARGES:- RS.-50000/-
Cl-5.6(Safety Against UV Exposure)	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-8(Marking )	-	1000	TESTING CHARGES:- RS.-50000/-
Cl-4.1(Inlet Port)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-4.2( Method of Mounting)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-4.5(Materials)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-4.6(Power Supply)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-4.7(Maximum Rate of Flow)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-4.8(Indications and Protections)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.1(Type Pressure Test (Hydrostatic Test))	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.2(Routine Pressure Test (Pneumatic Test))	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.3(Verification of Maximum Rate of Flow)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.4(Test for Microbiological Reduction )	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.4, Table 1 (i)(MS-2 coliphage (for UV systems operating at 254 nm)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.4, Table 1 (ii)(Q-β coliphage (for UV systems operating at wavelength other than 254 nm)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.5(Electrical Safety)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-5.6(Safety Against UV Exposure)	-	0	TESTING CHARGES ALREADY MENTIONED
Cl-8(Marking )	-	0	TESTING CHARGES ALREADY MENTIONED

17 Jun, 2027

-
-

715

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

WT, HFW, ERW or HFIW, OAW, HFS CDS CEW (160, 210, 240, 310, 370, 430 & 540)

10200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	0	Total Testing charges excluding Raw material testing are Rs. 10200/-. Testing charges for (Raw material) Carbon, Manganese, Nb + V + Ti & Nitrogen are Rs. 3000/- extra only if applicable.
13(Mechanical Testing)	-	0	NA
6.0(Workmanship)	-	500	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	500	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	0	NA
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	0	NA
11.1(Surface Protection)	-	1500	Testing charges for Surface Protection (Mass of Zinc Coating + Uniformity of Coating) are Rs. 1500/-
11.2(Surface Protection)	-	0	Testing charges for Surface Protection (Mass of Zinc Coating + Uniformity of Coating) are Rs. 1500/- already mentioned above
13.1.3(Tensile Strength)	-	1500	Testing charges for Tensile Strength, Yield Strength & Elongation Percent are Rs. 1500/-
13.1.1(Yield Stress)	-	0	Testing charges for Tensile Strength, Yield Strength & Elongation Percent are Rs. 1500/- already mentioned above.
13.1.2(Elongation)	-	0	Testing charges for Tensile Strength, Yield Strength & Elongation Percent are Rs. 1500/- already mentioned above.
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	600	Testing charges for Bend test (Strip & Whole tube) are Rs. 600/-
13.4(Bend Test (Whole Tube))	-	0	Testing charges for Bend test (Strip & Whole tube) are Rs. 600/- already mentioned above.
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	0	NA
6.0(Workmanship)	-	0	Testing charges already mentioned above
4.1(Sulphur-Percentage by mass)	-	0	Testing charges already mentioned above
4.1(Phosphorus-Percentage by mass)	-	0	Testing charges already mentioned above
8.0(Straightness)	-	0	Testing charges already mentioned above
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	0	NA
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	0	NA
11.1(Surface Protection)	-	0	Testing charges already mentioned above
11.2(Surface Protection)	-	0	Testing charges already mentioned above
13.1.3(Tensile Strength)	-	0	Testing charges already mentioned above
13.1.1(Yield Stress)	-	0	Testing charges already mentioned above
13.1.2(Elongation)	-	0	Testing charges already mentioned above
13.2(Flattening Test)	-	0	Testing charges already mentioned above
13.3(Bend Test (Strip))	-	0	Testing charges already mentioned above
13.4(Bend Test (Whole Tube))	-	0	Testing charges already mentioned above
13.5(Drift Expansion Test)	-	0	Testing charges already mentioned above
13.6(Crush Test)	-	0	Testing charges already mentioned above
19.1.3(Height of Internal Fin)	-	0	NA
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	300	-
Cl. 19.1.3(Internal Fin Height)	-	0	NA
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	0	NA
Cl. 9(Length)	-	500	-
4.0 (a)(Carbon as C - IS:8811)	-	3000	Testing charges (Raw Material) for Carbon, Manganese, Nb + V + Ti & Nitrogen are Rs. 3000/-
4.0 (b)(Manganese as Mn - IS:8811)	-	0	Testing charges (Raw Material) for Carbon, Manganese, Nb + V + Ti & Nitrogen are Rs. 3000/- already mentioned above
4.0 (b)(Manganese as Mn - IS:8811)	-	0	Testing charges already mentioned above
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	0	Testing charges (Raw Material) for Carbon, Manganese, Nb + V + Ti & Nitrogen are Rs. 3000/- already mentioned above
4.0 (f)(Nitrogen content)	-	0	Testing charges (Raw Material) for Carbon, Manganese, Nb + V + Ti & Nitrogen are Rs. 3000/- already mentioned above
9(Length -SOP MT-23)	-	0	Testing charges already mentioned above
10(Outside diameter-SOP MT-23)	-	500	Testing charges for Outside Diameter & Thickness are Rs. 500/-
10(Thickness - SOP MT-23)	-	0	Testing charges for Outside Diameter & Thickness are Rs. 500/- already mentioned above.
10(Mass of Tube-SOP MT-23)	-	300	-
10(Area of Cross Section)	-	0	Testing charges already mentioned above
16(Marking)	-	0	NA
CL 10("1.Outer dia (04) 2.Thickness (08)")	-	0	NA
CL 10(Minimum Outer dia (04))	-	0	NA
CL 10(Maximum Outer dia (04))	-	0	NA
Cl-10(" Minimum Thickness (08)")	-	0	NA
CL 10(Maximum Thickness (08))	-	0	NA
Cl. 4.1(Silicon)	-	0	NA
Cl. 4.1(Aluminum)	-	0	NA
Cl. 4.1(Niobium)	-	0	NA
Cl. 4.1(Titanium)	-	0	NA
Cl. 4.1(Copper)	-	0	NA
Cl. 4.1(Molybdenum)	-	0	NA
Cl. 4.1(Boron)	-	0	NA
Cl. 4.1(Tungston)	-	0	NA
Cl. 4.1((Cr + w + Mo))	-	0	NA
Cl. 4.1(Carbon Equivalent)	-	0	NA
Cl. 4.1(Vanadium)	-	0	NA

31 Dec, 2026

-
Included w.e.f 09.07.2026

716

Vimta labs Limited, Hyderabad

6102906

IS 1374 (2024)

Chicken Feeds - Specification (Sixth Revision)

ALL

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Description)	-	500	Nil
Cl-4.1.1(Ingredients)	-	500	Nil
Cl-4.1.2, Table-1 (i)(Moisture)	-	500	Nil
Cl-4.1.2, Table-1 (ii)(Crude protein)	-	500	Nil
Cl-4.1.2, Table-1 (iii)(Ether extract)	-	500	Nil
Cl-4.1.2, Table-1 (iv)(Crude fibre)	-	499.97	Nil
Cl-4.1.2, Table-1 (v)(Acid insoluble ash,)	-	500	Nil
Cl-4.1.2, Table-1 (vi)(Salt (as NaCl))	-	500	Nil
Cl-4.1.2, Table-2 (i)(Calcium)	-	499.99	Nil
Cl-4.1.2, Table-2 (ii)(Total phosphorus)	-	499.98	Nil
Cl-4.1.2, Table-2 (iii)(Available phosphorus)	-	500	Nil
Cl-4.1.2, Table-2 (iv)(Lysine)	-	500	Nil
Cl-4.1.2, Table-2 (v)(Methionine)	-	500	Nil
Cl-4.1.2, Table-2 (vi)(Methionine +Cysteine)	-	500	Nil
Cl-4.1.2, Table-2 (vii)(Threonine)	-	500	Nil
Cl-4.1.2, Table-2 (viii)(Metabolizable energy)	-	500	Nil
Cl-4.1.3, Table-3 (i)(Manganese)	-	1000	Nil
Cl-4.1.3, Table-3 (ii)(Iodine)	-	1000	Nil
Cl-4.1.3, Table-3 (iii)(Iron)	-	1000	Nil
Cl-4.1.3, Table-3 (iv)(Zinc)	-	1000	-
Cl-4.1.3, Table-3 (v)(Copper)	-	999.99	-
Cl-4.1.3, Table-3 (vi)(Selenium)	-	1000	Nil
Cl-4.1.3, Table-3 (vii)(Sodium)	-	999.99	Nil
Cl-4.1.3, Table-3 (viii)(Chloride)	-	1000	Nil
Cl-4.1.3, Table-3 (ix)(Potassium)	-	1000	Nil
Cl-4.1.3, Table-3 (x)(Vitamin A)	-	1000	Nil
Cl-4.1.3, Table-3 (xi)(Vitamin D3)	-	1000	Nil
Cl-4.1.3, Table-3 (xii)(Vitamin B1)	-	1000	Nil
Cl-4.1.3, Table-3 (xiii)(Vitamin B2)	-	999.97	Nil
Cl-4.1.3, Table-3 (xiv)(Pantothenic acid)	-	1000	Nil
Cl-4.1.3, Table-3 (xv)(Niacin)	-	1000	Nil
Cl-4.1.3, Table-3 (xvi)(Biotin)	-	1000	Nil
Cl-4.1.3, Table-3 (xvii)(Vitamin B12)	-	1000	Nil
Cl-4.1.3, Table-3 (xviii)(Folic acid)	-	1000	Nil
Cl-4.1.3, Table-3 (xix)(Choline)	-	1000	Nil
Cl-4.1.3, Table-3 (xx)(Vitamin E)	-	1000	Nil
Cl-4.1.3, Table-3 (xxi)(Vitamin K)	-	1000	Nil
Cl-4.1.3, Table-3 (xxii)(Vitamin B6)	-	1000	Nil
Cl-4.1.4, Table-4 (i)(Arsenic)	-	1000	Nil
Cl-4.1.4, Table-4 (ii)(Fluorine)	-	1000	Nil
Cl-4.1.4, Table-4 (iii)(Lead)	-	1000	Nil
Cl-4.1.4, Table-4 (iv)(Mercury)	-	1000	Nil
Cl-4.1.4, Table-4 (v)(Nitrite (Na pitrite))	-	1000	Nil
Cl-4.1.4, Table-4 (vi)(Aflatoxin B 1)	-	1000	Nil
Cl-4.1.4, Table-4 (vii)(Free gossypo)	-	1000	Nil
Cl-4.1.4, Table-4 (viii)(Hydrocyanic acid)	-	1000	Nil
Cl-4.1.4, Table-4 (ix)(BHC)	-	1000	Nil
Cl-4.1.4, Table-4 (x)(DDT)	-	1000	Nil
Cl-4.1.4, Table-4 (xi)(Endosulphan)	-	1000	Nil
Cl-4.1.4, Table-4 (xii)(Aldrin)	-	1000	Nil
Cl-4.3(Optional Requirements)	-	500	Nil
Cl-5.2(Marking)	-	500	Nil
Cl 4.4(Quality of water used in feed management)	-	500	Nil
Cl-4.6(Levels of vitamins and minerals in chicken feed raw material)	-	500	Nil
Cl-4.1.3, Table-3 (xxiii)(Linoleic acid)	-	500	Nil
Cl-4.1(Description)	-	-	-
Cl-4.1.1(Ingredients)	-	-	-
Cl-4.1.2, Table-1 (i)(Moisture)	-	-	-
Cl-4.1.2, Table-1 (ii)(Crude protein)	-	-	-
Cl-4.1.2, Table-1 (iii)(Ether extract)	-	-	-
Cl-4.1.2, Table-1 (iv)(Crude fibre)	-	-	-
Cl-4.1.2, Table-1 (v)(Acid insoluble ash,)	-	-	-
Cl-4.1.2, Table-1 (vi)(Salt (as NaCl))	-	-	-
Cl-4.1.2, Table-2 (i)(Calcium)	-	-	-
Cl-4.1.2, Table-2 (ii)(Total phosphorus)	-	-	-
Cl-4.1.2, Table-2 (iii)(Available phosphorus)	-	-	-
Cl-4.1.2, Table-2 (iv)(Lysine)	-	-	-
Cl-4.1.2, Table-2 (v)(Methionine)	-	-	-
Cl-4.1.2, Table-2 (vi)(Methionine +Cysteine)	-	-	-
Cl-4.1.2, Table-2 (vii)(Threonine)	-	-	-
Cl-4.1.2, Table-2 (viii)(Metabolizable energy)	-	-	-
Cl-4.1.3, Table-3 (i)(Manganese)	-	-	-
Cl-4.1.3, Table-3 (ii)(Iodine)	-	-	-
Cl-4.1.3, Table-3 (iii)(Iron)	-	-	-
Cl-4.1.3, Table-3 (iv)(Zinc)	-	-	-
Cl-4.1.3, Table-3 (v)(Copper)	-	-	-
Cl-4.1.3, Table-3 (vi)(Selenium)	-	-	-
Cl-4.1.3, Table-3 (vii)(Sodium)	-	-	-
Cl-4.1.3, Table-3 (viii)(Chloride)	-	-	-
Cl-4.1.3, Table-3 (ix)(Potassium)	-	-	-
Cl-4.1.3, Table-3 (x)(Vitamin A)	-	-	-
Cl-4.1.3, Table-3 (xi)(Vitamin D3)	-	-	-
Cl-4.1.3, Table-3 (xii)(Vitamin B1)	-	-	-
Cl-4.1.3, Table-3 (xiii)(Vitamin B2)	-	-	-
Cl-4.1.3, Table-3 (xiv)(Pantothenic acid)	-	-	-
Cl-4.1.3, Table-3 (xv)(Niacin)	-	-	-
Cl-4.1.3, Table-3 (xvi)(Biotin)	-	-	-
Cl-4.1.3, Table-3 (xvii)(Vitamin B12)	-	-	-
Cl-4.1.3, Table-3 (xviii)(Folic acid)	-	-	-
Cl-4.1.3, Table-3 (xix)(Choline)	-	-	-
Cl-4.1.3, Table-3 (xx)(Vitamin E)	-	-	-
Cl-4.1.3, Table-3 (xxi)(Vitamin K)	-	-	-
Cl-4.1.3, Table-3 (xxii)(Vitamin B6)	-	-	-
Cl-4.1.4, Table-4 (i)(Arsenic)	-	-	-
Cl-4.1.4, Table-4 (ii)(Fluorine)	-	-	-
Cl-4.1.4, Table-4 (iii)(Lead)	-	-	-
Cl-4.1.4, Table-4 (iv)(Mercury)	-	-	-
Cl-4.1.4, Table-4 (v)(Nitrite (Na pitrite))	-	-	-
Cl-4.1.4, Table-4 (vi)(Aflatoxin B 1)	-	-	-
Cl-4.1.4, Table-4 (vii)(Free gossypo)	-	-	-
Cl-4.1.4, Table-4 (viii)(Hydrocyanic acid)	-	-	-
Cl-4.1.4, Table-4 (ix)(BHC)	-	-	-
Cl-4.1.4, Table-4 (x)(DDT)	-	-	-
Cl-4.1.4, Table-4 (xi)(Endosulphan)	-	-	-
Cl-4.1.4, Table-4 (xii)(Aldrin)	-	-	-
Cl-4.3(Optional Requirements)	-	-	-
Cl-5.2(Marking)	-	-	-
Cl 4.4(Quality of water used in feed management)	-	-	-
Cl-4.6(Levels of vitamins and minerals in chicken feed raw material)	-	-	-
Cl-4.1.3, Table-3 (xxiii)(Linoleic acid)	-	-	-

31 Mar, 2028

-
Included w.e.f-09.07.2026

717

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

8166826

IS 10322 (Part 5/Sec 18) (2026)

Luminaires Part 5 Particular requirements Section 18 Luminaires for swimming pools and similar applications

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	1000	-
Cl-18.6(Marking)	-	1000	-
Cl-18.6.2(Marking)	-	1000	-
Cl-18.7.2(Construction-mechanical strength)	-	1000	-
Cl-18.7.3(Construction-corrosion test)	-	1000	-
Cl-18.8(Creepage distances and clearances)	-	1000	-
Cl-18.10(Terminals)	-	1000	-
Cl-18.11(External and internal wiring)	-	1000	-
Cl-18.12(Protection against electric shock)	-	1000	-
Cl-18.13.2(Relevant tests)	-	1000	-
Cl-18.13.3(Endurance tests and thermal tests)	-	1000	-
Cl-18.14.2(moisture)	-	1000	-
Cl-18.14.3(Thermal shock test)	-	1000	-
Cl-18.15(Insulation resistance and electric strength)	-	1000	-
Cl-18.16(Resistance to heat, fire and tracking)	-	1000	-
Cl-18.4(General test requirements)	-	0	-
Cl-18.6(Marking)	-	0	-
Cl-18.6.2(Marking)	-	0	-
Cl-18.7.2(Construction-mechanical strength)	-	0	-
Cl-18.7.3(Construction-corrosion test)	-	0	-
Cl-18.8(Creepage distances and clearances)	-	0	-
Cl-18.10(Terminals)	-	0	-
Cl-18.11(External and internal wiring)	-	0	-
Cl-18.12(Protection against electric shock)	-	0	-
Cl-18.13.2(Relevant tests)	-	0	-
Cl-18.13.3(Endurance tests and thermal tests)	-	0	-
Cl-18.14.2(moisture)	-	0	-
Cl-18.14.3(Thermal shock test)	-	0	-
Cl-18.15(Insulation resistance and electric strength)	-	0	-
Cl-18.16(Resistance to heat, fire and tracking)	-	0	-
Cl-18.4(General test requirements)	-	0	-
Cl-18.6(Marking)	-	0	-
Cl-18.6.2(Marking)	-	0	-
Cl-18.7.2(Construction-mechanical strength)	-	0	-
Cl-18.7.3(Construction-corrosion test)	-	0	-
Cl-18.8(Creepage distances and clearances)	-	0	-
Cl-18.10(Terminals)	-	0	-
Cl-18.11(External and internal wiring)	-	0	-
Cl-18.12(Protection against electric shock)	-	0	-
Cl-18.13.2(Relevant tests)	-	0	-
Cl-18.13.3(Endurance tests and thermal tests)	-	0	-
Cl-18.14.2(moisture)	-	0	-
Cl-18.14.3(Thermal shock test)	-	0	-
Cl-18.15(Insulation resistance and electric strength)	-	0	-
Cl-18.16(Resistance to heat, fire and tracking)	-	0	-

07 Jan, 2027

-
Included w.e.f 03.08.2026

718

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

Low speed food grinding machines

34500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	1000	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	2000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	2500	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	2500	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	1500	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	2500	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	2000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	1500	-
Cl. 22 302-2-209 : 1994(Construction )	-	3000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	2500	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	2500	-
Cl. 18 302-2-209 : 1994(Endurance)	-	3000	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	1500	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2500	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	2000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2500	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	2500	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	2000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	1500	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	2000	-
Cl. 7 302-2-209 : 1994(Marking)	-	1500	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	1500	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	1500	For Type Test- 34500/- For Acceptance test- 16000/- For Routine test- 7000/-
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	0	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	0	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	0	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	0	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	0	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	0	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	0	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	0	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	0	-
Cl. 22 302-2-209 : 1994(Construction )	-	0	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	0	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	0	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	0	-
Cl. 18 302-2-209 : 1994(Endurance)	-	0	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	0	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	0	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	0	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	0	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	0	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	0	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	0	-
Cl. 7 302-2-209 : 1994(Marking)	-	0	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	0	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	0	-

-
Included w.e.f. 03.06.2026 Exclusion: "Cl. 24 302-2-209 : 1994 (Components) Cl-19.11.4.1 (Electrostatic discharge) Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge Immunity test) Cl-19.11.4.5 (Immunity to conducted discharge) Cl-19.11.4.6 (Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) "

719

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

Step Bolts for Steel Structures

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GRADES)	-	0	-
5(MECHANICAL PROPERTIES)	-	22000	-
6-6.1(Nuts)	-	21999.99	-
6-6.2.1(Washers)	-	22000	-
6-.6.2.2(Washers)	-	22000	-
7(GENERAL REQUIREMENTS)	-	22000	-
8.1(FINISH)	-	22000	-
8.2()	-	22000	-
8.3()	-	22000	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	22000	-
10.1.1(TESTS)	-	22000	-
12(MARKING)	-	22000	-
13(PACKAGING)	-	22000	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	22000	-
Table 3 (ii)(Lower yield strength)	-	22000	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	22000	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	22000	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	22000	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	22000	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	22000	-
Table 3 (ix)(Head soundness)	-	22000	-
Table 3 (x)(Vickers hardness)	-	22000	-
table 3 (xi)(Brinell hardness)	-	22000	-
table 3()	-	22000	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	22000	-
Table 3 (xiv)(Surface hardness)	-	22000	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	22000	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	22000	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	22000	-
table 3 (xvii)(Breaking torque)	-	22000	-
table 3 (xviii)(Impact strength, KV)	-	22000	-
Table3 (xix)(Surface integrity in accordance with)	-	22000	-
table 3 (xvii)(Breaking torque Nm)	-	22000	-
3(DIMENSIONS AND TOLERANCES)	-	22000	-
CL 8(Finish)	-	22000	-
5(Torsion test)	-	22000	-
Clause 3(Thread Requirements)	-	22000	-
Clause 11(Designation)	-	0	-
Clause 13(Packaging)	-	0	-
CL 3(Dimensions and Tolerances)	-	22000	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	22000	-

-
Included w.e.f. 17.08.2026

720

BIS, Northern Regional Laboratory (NRL)

None

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (Conductors -Material)	-
Cl-5, Table-1 (i) (Tensile strength)	-
Cl-5, Table-1 (ii) (a) (Elongation at break- Ageing in air oven)	-
Cl-5, Table-1 (ii) (b) (Variation in tensile strength, from that without ageing)	-
Cl-5, Table-1 (ii) (c) (Variation in elongation at break, from that without ageing)	-
Cl-5, Table-1 (iii) (a) (Hot set- Treatment;)	-
Cl-5, Table-1 (iii) (c) (Hot set- Permanent elongation after cooling)	-
Cl-5, Table-1 (iii) (b) (Hot set- Elongation under load)	-
Cl-5, Table-1 (iv) (Shrinkage)	-
Cl-5, Table-1 (v) (Water absorption (gravimetric))	-
Cl-5, Table-1 (vi) (Volume resistivity)	-
Cl-6.1 (a) (Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-
Cl-6.1 (B) (Fillers and inner sheath- Thermoplastic materials)	-
Cl-7 (Armouring)	-
Cl-8 (Outer Sheath)	-
Cl-10.3 (Tolerance on Thickness of Insulation)	-
Cl-11 (Core Identification)	-
Cl-12 (Laying up of Cores)	-
Cl-13 (Inner Sheath (Common Covering))	-
Cl-14.1 (Armouring- Application)	-
Cl-14.1.2 (armour round wires/formed wires)	-
Cl-14.2 (Type of Armour)	-
Cl-14.3 (Dimensions)	-
Cl-14.4 (Joints)	-
Cl-14.5 (Resistance)	-
Cl-15.3 (Thickness of Outer Sheath)	-
Cl-16.1 (i) (a) (Test on conductor: Annealing test (for copper);)	-
Cl-16.1 (i) (b) (Test on conductor: Tensile test (for aluminium);)	-
Cl-16.1 (i) (c) (Test on conductor: Wrapping test (for aluminium);)	-
Cl-16.1 (i) (d) (Test on conductor: Resistance test)	-
Cl-14.6 (a) (Physical tests on round wires/formed wires- Tensile strength)	-
Cl-14.6 (b) (Physical tests on round wires/formed wires- Elongation at break)	-
Cl-14.6 (c) (Physical tests on round wires/formed wires- Torsion test for round wires)	-
Cl-14.6 (d) (Physical tests on round wires/formed wires- Winding test for formed wires)	-
Cl-14.6 (e) (Physical tests on round wires/formed wires- Uniformity of zinc coating)	-
Cl-14.6 (f) (Physical tests on round wires/formed wires- Mass of zinc coating)	-
Cl-14.6 (g) (Physical tests on round wires/formed wires- Resistivity.)	-
Cl-10, 13, 15 (Test for thickness of insulation and sheath)	-
Cl-16.1 (v) (1) (PVC Sheath- Tensile strength and elongation at break;)	-
Cl-16.1 (v) (2) (PVC Sheath- Ageing in air oven)	-
Cl-16.1 (v) (3) (PVC Sheath- Loss of mass in air oven)	-
Cl-16.1 (v) (5) (PVC Sheath- Hot deformation test)	-
Cl-16.1 (v) (6) (PVC Sheath- Heat shock test)	-
Cl-16.1 (v) (7) (PVC Sheath- Thermal stability)	-
Cl-17.2 (High voltage test)	-
Cl-17.3 (Flammability test)	-
Cl-17.4 (Oxygen index test (FR, FR-LSH or LSHF Sheath))	-
Cl-17.5 (Flame retardance test on single cable)	-
Cl-17.6 (Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-
Cl-17.8 (Smoke density test (FR-LSH or LSHF Sheath))	-
Cl-17.9 (Temperature index test; (FR, FR-LSH or LSHF Sheath))	-
Cl-16.4 (i) (Cold bend test for outer sheath)	-
Cl-16.4 (ii) (Cold impact test for outer sheath)	-
Cl. 9 (Conductor - Regarding Construction Compliance)	-
Cl. 10.4 (Application of Insulation)	-
Cl. 13.3 (Thickness of Inner sheath)	-
Cl. 15.1 (Application of Outer sheath)	-
Cl. 15.2 (Clour of Outer sheath)	-

-
Complete test for category C1& C2, Test facility not available for Cl. 17.10 Test for pH and conductivity, Cl. 17.11Test for light transmission, Table 1B Cold elongation test for LSHF (Optional).

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number