BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

781

Aaditech Test and Calibration Lab LLP

8179926

IS 2508 (2024)

Polyethylene Films and Sheets â Specification (Fourth Revision)

All Grade / Type / Size / Designation

9750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	750	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	750	-
5.1.6(Ash content - IS 2508: 2024)	-	750	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	750	-
5.1.1(Appearance)	-	500	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	500	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	250	-
5.2.1.2(Nominal Width)	-	250	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1500	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	1000	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	1000	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	1000	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	750	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	1500	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1000	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	1000	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	1000	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	1000	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	1000	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	1000	-
Cl-4.2.3.1.4 (b)(Toluene Extract)	-	750	-
Cl-4.2.3.1.4 (c)(Volatile Matter, Max)	-	750	-
Cl-4.2.3.1.4 (d)(Carbon Black Particle Size)	-	750	-
Cl-4.2.3.1.4 (e)(Tint Strength)	-	1000	-
Cl-4.2.3.1.4 (a)(Density)	-	750	-
5.1.4 Sl No. (i) of Table 1, Table 2, Table 3 & Table 4.(Density - IS 13360 : Part 3 : Sec 10 : 2021)	-	-	-
5.1.6(Black Film- Carbon black - IS 2508:2024)	-	-	-
5.1.6(Ash content - IS 2508: 2024)	-	-	-
5.1.6(carbon black dispersion - IS 2530: 1963)	-	-	-
5.1.1(Appearance)	-	-	-
5.1.2(Film Form)	-	-	-
5.1.3(Odour)	-	-	-
5.2.1.1/ Table-1,2,3 &4(Nominal Thickness, Annex C,)	-	-	-
5.2.1.2(Nominal Width)	-	-	-
6, Type 1 (LDPE/LLDPE) /Table-1("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-	-
6/Table-1(Tear resistance -Machine direction, IS 13360 (Part 5/Sec 23))	-	-	-
" 7, Type 2 (HDPE/PE) /Table-2"("Tensile strength at break-Machine direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Tensile strength at break-Transverse direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Elongation % at break, -Machine direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Elongation % at break, -Transverse direction,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/ Sec 3)")	-	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days-Machine Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
" 7/Table-2"("Ageing test at (70 ± 1) ºC for 7 days- Transverse Direction, IS 7016 (Part 8) followed by IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
6/Table-1(Tear resistance-Transverse direction, IS 13360 (Part 5/Sec 23))	-	-	-
5.1.5(Melt Flow Index- IS 13360 : Part 4 : Sec 1 : subsec 1 or IS 13360 : Part 4 : Sec 1 : subsec 2)	-	-	-
" 7/Table-2"(Dart impact strength,Method B of IS 13360 (Part 5/Sec 6))	-	-	-
8, Type 3 (LDPE/LLDPE, PE) /Table-3("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3("Average Tensile Break Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
8/Table-3(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-	-
8/Table-3(Average Puncture resistance, IS 2508: 2024 Annex-E)	-	-	-
9, Type 4 (HDPE/PE) /Table-4("Average Yield strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Yield strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile Break strength- Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile Break strength- Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile yield Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4("Average Tensile yield Elongation %-Transverse Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3)")	-	-	-
9/Table-4(Average Tensile Break Elongation %-Machine Direction, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 3))	-	-	-
9/Table-4(Average Tensile Break Elongation -Transverse Direction, IS 13360 (Part 5/Sec 1) and S 13360 (Part 5/Sec 3))	-	-	-
9/Table-4(Average Tear resistance, IS 2508: 2024 Annex-D)	-	-	-
Cl-4.2.3.1.4 (b)(Toluene Extract)	-	-	-
Cl-4.2.3.1.4 (c)(Volatile Matter, Max)	-	-	-
Cl-4.2.3.1.4 (d)(Carbon Black Particle Size)	-	-	-
Cl-4.2.3.1.4 (e)(Tint Strength)	-	-	-
Cl-4.2.3.1.4 (a)(Density)	-	-	-

-
Included w.e.f 01.04.2026

782

BIS, Western Regional Laboratory (WRL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7, Table-1 (Diameter of Wire (mm))	-
Cl-7, Table-1 (Minimum Tensile Strength of Wire)	-
Cl-7, Table-1 (Minimum Elongation on 250 mm (percent))	-
Cl-8 (Freedom from Defects)	-
Cl-9.1.1 (Wires-Nominal Sizes)	-
Cl-9.2.1 (Stranded Conductors- Size)	-
Cl-10 (Joints in Wires)	-
11 (Stranding)	-
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Complete Test facility up to 80 square mm. For sizes above 80 square mm, Partial Test facility except Ultimate tensile Strength Test (Cl. 16.9) and Stress-Strain Test (Cl. 16.11)

783

BIS, Western Regional Laboratory (WRL)

None

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Marking and instructions)	-
8.1.1 (Protection against live parts in all positions)	-
10.1 (Power input)	-
11.1 (General)	-
13.1 (General)	-
15.0 (General)	-
16.0 (General)	-
18 (Endurance Test requirements and tests)	-
19 (Abnormal Operation)	-
20 (Stability test)	-
21 (Mechanical Strength Test)	-
22 (Construction verification related test)	-
23 (General)	-
24 (Components)	-
25 (Supply connection and external flexible cords)	-
26 (Terminals for external conductors)	-
27 (Provision for earthing)	-
28 (Screw test and connections)	-
29 (clearance, creepage distances and solid insulation)	-
30.1 (Ball pressure test)	-
30.2 (Glow Wire Test)	-
31 (Resistance to Rusting)	-

-
For following appliances: 1) Wet Grinders 2) Egg Beater 3) Electric Shredder 4) Electric Water Boiler 5) Electric Kettle 6) Electric Centrifugal Juicer 7) Electric Slicing Machine 8) Electrical Grills & Toasters 9) Frying Pans 10) Warming Plates 11) Shavers ,Hair Clippers 12) Massage Appliances 13) Electric Food Processors 14) Electric Stove 15) Oral Hygiene Appliances

784

CIMEC Infralabs Private Limited

8195606

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

NB: 65 mm to 350 mm, Designation: YSt 210, YSt 240, YSt 310 and YSt 355

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	200	-
Cl 8(Workmanship)	-	200	-
Cl 9(Workmanship)	-	200	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	-
Cl 13(Workmanship)	-	200	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	800	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	800	-
5 AND AS PER IS 10748(COPPER)	-	400	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	1000	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	400	-
5 AND AS PER IS 10748(CARBON)	-	400	-
Clause - 5.1, Table-3( ALUMINIUM)	-	400	-
Clause - 5.1, Table-3(SILICON)	-	400	-
Clause - 5.1, Table-3(NITROGEN)	-	800	-
Clause - 5.1, Table-3(MANGANESE)	-	400	-
Clause - 5.1, Table-3(PHOSPHURS)	-	400	-
Clause - 5.1, Table-3(SULPHUR)	-	400	-
Clause - 5.1, Table-3( CARBON)	-	0	Repeated
9(Straightness)	-	500	-
10(Lengths)	-	200	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	1000	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	0	Repeated
Clause 11.2, Table -2(Yield Strength)	-	1000	-
Cl 13(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	0	REPEATED
8.0(Mass of Zinc coating - IS:6745)	-	0	Repeated
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	0	Repeated
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	0	Repeated
13.0(Oiling and Painting - Visual)	-	200	-
12(Marking)	-	200	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	0	Repeated
CL 06(Minimum Outer dia (04))	-	0	Repeated
CL 06(Maximum Outer dia (04))	-	0	Repeated
CL 06(" Minimum Thickness (08)")	-	0	Repeated
CL 06(Maximum Thickness (08))	-	0	Repeated
Cl.5,8.1,8.2(Chromium)	-	400	-
Cl.5,8.1,8.2(Boron(B))	-	400	-
Cl.5,8.1,8.2(Titanium(Ti))	-	400	-
Cl.5,8.1,8.2(Niobium(Nb))	-	400	-
Cl.5,8.1,8.2(Vanadium(V))	-	400	-
Cl.5,8.1,8.2(Nb+Ti+V)	-	400	-
Cl.5,8.1,8.2(Nickel)	-	400	-
Cl.5,8.1,8.2(Molybdenum)	-	400	-
Cl.5,8.1,8.2(Cr+Ni)	-	400	-
Cl.5,8.1,8.2(CE Equivalent)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
9(Straightness)	-	0	Repeated
10(Lengths)	-	0	Repeated
Cl 11.3.1(Flattening test (over 50 mm NB))	-	0	Repeated
Cl. 11.2 Table 2(Elongation)	-	0	Repeated
Cl. 11.2 Table 2(Yield strength)	-	0	Repeated
Cl. 6 , 6.2 Table 1(Weight)	-	0	Repeated
Cl. 6 , 6.2 Table 1(Thickness)	-	0	Repeated
Clause 11.2, Table -2(Elongation)	-	0	Repeated
Clause 11.2, Table -2(Yield Strength)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 6(Outer Diameter, Thickness & Mass)	-	0	Repeated
Cl 7(Workmanship)	-	0	Repeated
Cl 8(Workmanship)	-	0	Repeated
Cl 9(Workmanship)	-	0	Repeated
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	Repeated
Cl 13(Workmanship)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	0	Repeated
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	0	Repeated
8.0(Mass of Zinc coating - IS:6745)	-	0	Repeated
8.0(Freedom from defects - IS 4736)	-	0	Repeated
8.0(Uniformity of galvanized coating - IS 4736)	-	0	Repeated
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	0	Repeated
13.0(Oiling and Painting - Visual)	-	0	Repeated
12(Marking)	-	0	Repeated
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	0	Repeated
CL 06(Minimum Outer dia (04))	-	0	Repeated
CL 06(Maximum Outer dia (04))	-	0	Repeated
CL 06(" Minimum Thickness (08)")	-	0	Repeated
CL 06(Maximum Thickness (08))	-	0	Repeated
Cl.5,8.1,8.2(Chromium)	-	0	Repeated
Cl.5,8.1,8.2(Boron(B))	-	0	Repeated
Cl.5,8.1,8.2(Titanium(Ti))	-	0	Repeated
Cl.5,8.1,8.2(Niobium(Nb))	-	0	Repeated
Cl.5,8.1,8.2(Vanadium(V))	-	0	Repeated
Cl.5,8.1,8.2(Nb+Ti+V)	-	0	Repeated
Cl.5,8.1,8.2(Nickel)	-	0	Repeated
Cl.5,8.1,8.2(Molybdenum)	-	0	Repeated
Cl.5,8.1,8.2(Cr+Ni)	-	0	Repeated
Cl.5,8.1,8.2(CE Equivalent)	-	0	Repeated

14 Jan, 2029

-
-

785

Stellar Test House, Noida

8171606

IS 302 : PART 1 (Insect Killers)

Insect Killers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	500	-
5(General conditions for tests)	-	500	-
4(General Requirement)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.1(General)	-	1000	-
16.0(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	1000	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	1000	-
11.3(Heating)	-	1000	-
11.2(General)	-	1000	-
11.1(General)	-	1000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
7(Marking and instructions)	-	500	-

26 Sep, 2028

-
1. 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available 2. 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available 3. 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available 4. 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available 5. 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available 6. 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available 7. 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available"

786

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 16172 (2023)

Reinforcement Couplers for Mechanical Splices of Steel Bars in Concrete ? Specification (first revision)

Class H & L

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification)	-	0	-
6(Manufacture)	-	0	-
7(Workmanship and Finish)	-	0	-
8(Nominal Sizes)	-	1000	-
9.2.1(Tensile Strength)	-	4000	-
9.2.1.1(Disengagement test for threaded couplers)	-	4000	-
9.2.2(Percentage Elongation)	-	4000	-
9.3(Slip Test)	-	4000	-

-
Included w.e.f. 26.02.2026 Exclusion: "9.4 (Cyclic Tensile Test) 9.5.1 (Low cycle Fatigue Test) 9.5.2 (High Cycle Fatigue test) "

787

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

All Type

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Construction)	-	500	-
4.2(Materials)	-	500	-
4.3(Selection and Size)	-	500	-
4.4(Position of handle and knob with respect to cookware)	-	500	-
4.()	-	500	-
4.5(Attachment to cookware)	-	500	-
4.()	-	0	-
5.1(General)	-	500	-
5.2(Bending strength)	-	1000	-
5.3(Torque strength)	-	1000	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	1500	-
5.7(Thermal insulation)	-	2000	-
5.8(Heat resistance)	-	2000	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	2000	-
1()	-	500	-
4.1(Construction)	-	0	-
4.2(Materials)	-	0	-
4.3(Selection and Size)	-	0	-
4.4(Position of handle and knob with respect to cookware)	-	0	-
4.()	-	0	-
4.5(Attachment to cookware)	-	0	-
4.()	-	0	-
5.1(General)	-	0	-
5.2(Bending strength)	-	0	-
5.3(Torque strength)	-	0	-
5.4(Impact strength)	-	0	-
5.5(Fatigue resistance)	-	0	-
5.6(Leakage)	-	0	-
5.7(Thermal insulation)	-	0	-
5.8(Heat resistance)	-	0	-
5.9(Washing resistance)	-	0	-
5.10(Burning resistance)	-	0	-
1()	-	0	-

-
included w.e.f 17.03.2026

788

EMC Testing and Compliance LLP, Gurugram

8141526

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	500	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2500	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2500	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	2500	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	2500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2500	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child)	-	2500	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	2500	-
4.5 -5.5(Soft-filled toys)	-	2500	-
4.5 -5.5(Soft-filled toys)	-	2500	-
4.1(General)	-	0	Repeated
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	0	Repeated
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	0	Repeated
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	0	Repeated
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	0	Repeated
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	0	Repeated
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	0	Repeated
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child)	-	0	Repeated
4.4 -5.4(Toys intended to be entered by a child Warning)	-	0	Repeated
4.5 -5.5(Soft-filled toys)	-	0	Repeated
4.5 -5.5(Soft-filled toys)	-	0	Repeated

19 Jul, 2027

-
Included w.e.f.01.04.2026

789

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2000	-
7(Marking and instructions)	-	2000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22.16(Automatic cord reel)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	1000	-
22.47(Water pressure inlet)	-	1000	-
22.3(Flexing test)	-	1000	-
24(Components)	-	2000	-
22.46(Software)	-	1000	-
4(General Requirements)	-	2000	-
5(General conditions for the tests)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
18(ENDURANCE)	-	0	-

05 Aug, 2027

-
"1 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) Radiation ,Toxicity and Similar Hazards Test Facility is not availabe with the laboratory 2 19.11.4.1 (Electrostatic discharges) Electrostatic discharges Test Facility is not availabe with the laboratory 3 19.11.4.2 (Radiated fields) Radiated fields Test Facility is not availabe with the laboratory 4 19.11.4.3 (Fast transient bursts) Fast transient bursts Test Facility is not availabe with the laboratory 5 19.11.4.4 (Surge immunity test) Surge immunity test Test Facility is not availabe with the laboratory 6 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test Facility is not availabe with the laboratory 7 19.11.4.6 (Voltage dips and interruptions) Voltage dips and interruptions Test Facility is not availabe with the laboratory 8 19.11.4.7 (Harmonics) Harmonics Test Facility is not availabe with the laboratory" 9 22.46 (Software) 10 24 (Components)

790

Aaditech Test and Calibration Lab LLP

8179926

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All

12700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	200	-
6.3(General)	-	200	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	500	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	500	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	-
8.3.3(Flow Paths in Emitting Unit)	-	500	-
8.3.4(Spacing ofEmitter Units)	-	200	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	750	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	750	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.5(Resistance to Tension at Elevated Temperature)	-	1000	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1500	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1500	-
8.8(Determination of Emitting Unit Exponent)	-	500	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	500	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	500	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	700	-
4.2(Carbon black content)	-	700	-
4.2(Carbon black dispersion)	-	700	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	200	-
8.1.3(Regulated Emitting Pipes)	-	0	-
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	0	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	0	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	0	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	0	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	0	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	0	-
6.3(General)	-	0	-
6.3(General)	-	0	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	0	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing ofEmitter Units)	-	0	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	0	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	0	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	0	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	0	-
8.8(Determination of Emitting Unit Exponent)	-	0	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	0	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	0	-
4.2(Carbon black content)	-	0	-
4.2(Carbon black dispersion)	-	0	-
5.1(Materials)	-	0	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	0	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	0	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	0	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	0	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.2(Unregulated Emitting Pipes)	-	0	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	0	-
8.5(Resistance to Tension at Elevated Temperature)	-	0	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	0	-
8.7.1(Acceptance Test)	-	0	-
8.7.2(Type Test)	-	0	-
8.8(Determination of Emitting Unit Exponen)	-	0	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-
8.1.3(Regulated Emitting Pipes)	-	0	-

-
Included w.e.f 01.04.2026

791

Stellar Test House, Noida

8171606

IS 302 : PART 1 (Electric Centrifugal Juicers)

Electric Centrifugal Juicers

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
6(Classification- IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
27(Provision for Earthing)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
8(Protection Against Electric Shock, IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
22.102(Construction)	-	500	-
19.102(Abnormal Operation)	-	500	-
19.101(Abnormal Operation)	-	500	-
7.101(Marking)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	-	-
27(Provision for Earthing)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
4(GENERAL REQUIREMENTS)	-	-	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	-	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24.6(Components, IS 302-1)	-	-	-
24.5(Components, IS 302-1)	-	-	-
24.2(Components, IS 302-1)	-	-	-
24.1(Components, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22(Construction, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.116(Stability & Mechanical Hazards)	-	-	-
20.115(Stability & Mechanical Hazards)	-	-	-
20.114(Stability & Mechanical Hazards)	-	-	-
20.113(Stability & Mechanical Hazards)	-	-	-
20.112(Stability & Mechanical Hazards)	-	-	-
20.111(Stability & Mechanical Hazards)	-	-	-
20.110(Stability & Mechanical Hazards)	-	-	-
20.109(Stability & Mechanical Hazards)	-	-	-
20.108(Slicing machines shall incorporate a guard surrounding the circular knife, its open sector being no larger than required for using the appliance Knife guards shall be non-detachable unless the motor cannot be switched on after their removal. It shall not be possible to operate interlocks by means of test probe B of IS 1401. Appliance shall satisfy requirements as per Cl. 20.108 of IS 302-2-14-2009)	-	-	-
20.107(Stability & Mechanical Hazards)	-	-	-
20.106(Stability & Mechanical Hazards)	-	-	-
20.105(Stability & Mechanical Hazards)	-	-	-
20.104(Stability & Mechanical Hazards)	-	-	-
20.103(Stability & Mechanical Hazards)	-	-	-
20.102(Stability & Mechanical Hazards)	-	-	-
20.101(Stability & Mechanical Hazards)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19.1(Abnormal Operation, IS 302-1)	-	-	-
19.9(Abnormal Operation, IS 302-1)	-	-	-
19.8(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
15(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
8(Protection Against Electric Shock, IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
6(Classification- IS 302-1)	-	-	-
22.102(Construction)	-	-	-
19.102(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
7.101(Marking)	-	-	-

26 Sep, 2028

-
Included w.e.f. 08.04.2026 Exclusion 32 (Radiation, Toxicity and similar Hazard IS 302-1) "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) "

792

Electrical Research and Development Association

7132925

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

Distribution Transformer

115725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	690	Testing charges Measurement of winding resistance is Rs.690, Subsequent measurement at different taps is Rs.345
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	920	Testing charges for Measurement of winding resistance is Rs.920, Subsequent measurement at different taps is Rs.460
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	4313	Testing charges for short circuit impedance
21.2 d)(Measurement of no-load loss and current)	-	2875	Testing charges for no load loss and current
21.2 e)(Measurement of insulation resistance)	-	575	Testing charges for measurement of insulation resistance
21.2 f)(Induced over-voltage withstand test)	-	1150	Testing charges for induced over voltage withstand test
21.2 g)( Separate-source voltage withstand test)	-	1150	Testing charges for separate source voltage withstand test
21.3(a )(Lightning impulse test)	-	31762	Testing charges for lightening impulse test up to 100kVA is Rs.28875, from 100kVA up to 200kVA is Rs.31762
21.3(b)(Temperature-rise test)	-	17250	Testing charges for temperature rise test
21.4 a)( Determination of sound levels)	-	2620	Testing charges for determination of sound levels
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	10000	Testing charges up to 100kVA is Rs.10000, from 100kVA up to 200kVA is Rs.6000
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5000	Testing charges up to 100kVA is Rs.5000, from 100kVA and up to 200kVA is Rs.3000
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	6000	Testing charges for pressure test( type test)
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	3000	Testing charges for pressure test ( routine test)
21.5.3.3(Oil leakage test (routine test))	-	5000	Testing charges for oil leakage test ( routine test)
13.1(Marking (Rating Plates))	-	1000	Testing charges for Marking ( Rating plates)
13.2(Terminal Marking Plate)	-	1000	Testing charges for Terminal Marking Plate
13.3(Marking )	-	1000	Testing charges for Marking
13.4(Marking)	-	1000	Testing charges for Marking
13.4.1(Marking)	-	1000	Testing charges for Marking
14.1(MOUNTING ARRANGEMENT)	-	1000	Testing charges for Mounting arrangement
14.4(MOUNTING ARRANGEMENT)	-	1000	Testing charges for Mounting arrangement
15.1.1(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.2(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.3(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.4(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
15.1.5(TRANSFORMER TANK : Construction)	-	800	Testing charges for Transformer tank : construction
21.4 e(BDV and moisture content of oil in the transformer)	-	1990	Testing charges for BDV and moisture content of oil in the transformer
21.4 d(Paint adhesion tests)	-	4830	Testing charges for Paint adhesion tests
21.4 c(No load current at 112.5 percent voltage.)	-	1600	Testing charges for No load current at 112.5 percent voltage
11(Minimum clearance in Air)	-	1000	Testing charges for Minimum clearance in Air
16(Conservator for Non-sealed type Transformers)	-	1000	Testing charges for Conservator for Non-sealed type Transformers
20(Fittings)	-	2000	Testing charges for Fittings (Standard Fitting 1000/- & Optional Fitting 1000/-)

22 Dec, 2027

-
-

793

Aaditech Test and Calibration Lab LLP

8179926

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

All

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	250	-
Cl-5.2(Emitter Ends)	-	250	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	1000	-
Cl-6.3(Accuracy or Measuring Devices)	-	500	-
Cl-7.1(Construction and Workmanship)	-	500	-
Cl-7.2(Flow Paths in Emitter)	-	500	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1500	-
Cl-7.4(Emitter Pull-Out)	-	1000	-
Cl-7.4.1(In-Line Emitters)	-	1000	-
Cl-7.4.2(On-Line Emitters)	-	1000	-
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000	-
Cl-8.1.3(Determination of Emitter Exponent)	-	1000	-
Cl-9(Marking)	-	0	-

-
Included w.e.f 17.03.2026

794

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

YST-160, YST-210, YST-240, YST-310, YST-355

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	1000	-
Clause.4.0(Carbon)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Phosphorus)	-	1000	-
Clause.4.0(Silicon)	-	1000	-
Clause.4.0(Manganese)	-	1000	-
Clause.5.0(Supply of Material)	-	1500	-
Clause.5.0(Supply of Material)	-	1500	-
Clause.6.0(Workmanship)	-	1500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1000	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1500	-
Clause.10.0(Dimensions and properties)	-	1500	-
Clause.11.0(General)	-	1000	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Concavity and Convexity)	-	1500	-
Clause.11.0(Squareness of Sides)	-	1500	-
Clause.11.0(External Corner Radiius)	-	1500	-
Clause.11.0(Straightness and twist)	-	5000	-
Clause.12.0(Dimension Tolerances)	-	2000	-
Clause.12.0(Dimension Tolerances)	-	1500	-
Clause.13.0(Surface Protection)	-	1500	-
Clause.14.0(Testing)	-	2500	-
Clause.15.0(Tensile test)	-	1500	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1500	-
Clause.18.0(Marking)	-	1500	-
6(Workmanship)	-	1500	-
10(Dimensions and Properties)	-	2500	-
11(Measurement of Shape and Size)	-	1500	-
13(Surface Protection)	-	2000	-
15(Tensile Test)	-	1500	-
12(Dimensions and Tolerances)	-	2000	-
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Phosphorus)	-	1000	-
Clause.4.0(Silicon)	-	1000	-
Clause.4.0(Manganese)	-	1000	-
Clause.5.0(Supply of Material)	-	2500	-
Clause.5.0(Supply of Material)	-	2500	-
Clause.6.0(Workmanship)	-	1500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1500	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(General)	-	1500	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Thickness)	-	1000	-
Clause.11.0(Concavity and Convexity)	-	1000	-
Clause.11.0(Squareness of Sides)	-	1000	-
Clause.11.0(External Corner Radiius)	-	1500	-
Clause.11.0(Straightness and twist)	-	1500	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.13.0(Surface Protection)	-	2000	-
Clause.14.0(Testing)	-	1500	-
Clause.15.0(Tensile test)	-	1500	-
Clause.15.0(Yield strength)	-	1500	-
Clause.15.0(Elognation Percent)	-	1500	-
Clause.18.0(Marking)	-	1500	-
6(Workmanship)	-	2500	-
10(Dimensions and Properties)	-	1000	-
11(Measurement of Shape and Size)	-	1000	-
13(Surface Protection)	-	2000	-
15(Tensile Test)	-	1000	-
12(Dimensions and Tolerances)	-	1000	-

-
included w.e.f 17.03.2026

795

CIMEC Infralabs Private Limited

8195606

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Nominal Size: up to & including 36 mm. All Grades

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	400	-
4.1(Sulphur and phosphorous)	-	400	-
4.1(CE)	-	400	-
4.1( Nitrogen%)	-	800	-
4.1(Ni)	-	400	-
4.1(Mo)	-	400	-
4.1(Cr)	-	400	-
4.1( Ti)	-	400	-
4.1(V)	-	400	-
4.1( Nb)	-	400	-
4.1( Aluminium %)	-	400	-
4.1( Copper %)	-	400	-
4.1(Silicon %)	-	400	-
4.1(Sulphur %)	-	400	-
4.1(Phosphorus %)	-	400	-
4.1(Manganese %)	-	400	-
4.1(Carbon %)	-	400	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	800	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	200	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	400	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	400	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	400	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	400	-
8.18.1 Table 3(Total elongation at maximum force)	-	1000	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
5.7(PullOut (Bond Test))	-	3000	-
4.2(Niobium (Nb))	-	400	-
4.2(Boron (B))	-	400	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	3000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	3000	-
Cl. 5.7(Date of testing of concrete cubes)	-	1000	-
Cl. 5.7(Date of casting of concrete cubes)	-	1000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	1000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	500	-
Cl. 8.1 Table 3(Maximum Extension)	-	1000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	-
Cl. 4.3(Visual Inspection.)	-	200	-
Cl. 5.2(Surface Characteristics)	-	500	-
Clause 9.4(Rebend Test)	-	800	-
Clause 6.3(Effective Cross-sectional Area)	-	500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	1000	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 7.2(Weight)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 8.1(UTM)	-	1500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	800	-
13(Identification and marking)	-	200	-
5.7(Pull-out test - IS:2770(P1))	-	3000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	200	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	1000	-
4.3(Rolling and cold working of bars/wire)	-	200	-
7.1(Specified length)	-	200	-
9.1(Preparation of test sample)	-	500	-
9.5(Retest)	-	3000	-
12(Inspection)	-	200	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	1000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	1000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	-
1()	-	200	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1000	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	-	-
8.18.1 Table 3(Total elongation at maximum force)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
5.7(PullOut (Bond Test))	-	-	-
4.2(Niobium (Nb))	-	-	-
4.2(Boron (B))	-	-	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	-	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	-	-
Cl. 5.7(Date of testing of concrete cubes)	-	-	-
Cl. 5.7(Date of casting of concrete cubes)	-	-	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	-	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	-	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	-	-
Cl. 8.1 Table 3(Maximum Extension)	-	-	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	-	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	-	-
Cl. 4.3(Visual Inspection.)	-	-	-
Cl. 5.2(Surface Characteristics)	-	-	-
Clause 9.4(Rebend Test)	-	-	-
Clause 6.3(Effective Cross-sectional Area)	-	-	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-	-
Cl 9.3(Load In One Direction)	-	-	-
Cl 8.1(UTM)	-	-	-
Cl 7.2(Weight)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl 5(Deformations and Surface Characteristics)	-	-	-
Cl 7.2(Weight)	-	-	-
Cl 8.1(UTM)	-	-	-
Cl 9.3(Load In One Direction)	-	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-	-
13(Identification and marking)	-	-	-
5.7(Pull-out test - IS:2770(P1))	-	-	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	-	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	-	-
4.3(Rolling and cold working of bars/wire)	-	-	-
7.1(Specified length)	-	-	-
9.1(Preparation of test sample)	-	-	-
9.5(Retest)	-	-	-
12(Inspection)	-	-	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	-	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	-	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	-	-
1()	-	-	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-
Cl 6.1(Length, Width & Thickness)	-	-	-

14 Jan, 2029

-
-

796

CIMEC Infralabs Private Limited

8195606

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

All Type

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	100	-
4(Type)	-	100	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	400	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	400	-
6(Thickness of sheet/strip)	-	500	-
6(Depth of bowl)	-	200	-
6(Internal dimensions of the bowl)	-	500	-
6(Bowl locating limits)	-	400	-
6(Co-ordinating sizes)	-	500	-
7.1(Consruction and workmanship)	-	200	-
7.1.1(Consruction and workmanship)	-	200	-
7.2(Consruction and workmanship)	-	200	-
7.2.1(Consruction and workmanship)	-	200	-
7.3(Drainers)	-	300	-
7.4(Waste outlet)	-	200	-
7.5(Tap holes)	-	200	-
7.6(Overflows)	-	200	-
8(Finish)	-	100	-
5(MATERIALS)	-	500	-
6.1.1(Thickness of Sheet/Strip)	-	500	-
6.1.2(Thickness of Sheet/Strip)	-	500	-
6.2(Depth of Bowls)	-	200	-
6.3(Internal Dimensions of Bowls)	-	500	-
6.4.1(Bowl Locating Limits)	-	500	-
6.5(Coordinating Sizes)	-	500	-
7.1(CONSTRUCTION AND WORKMANSHIP)	-	100	-
7.1.1(CONSTRUCTION AND WORKMANSHIP)	-	100	-
7.2.1(CONSTRUCTION AND WORKMANSHIP)	-	100	-
7.3(CONSTRUCTION AND WORKMANSHIP)	-	100	-
7.4(Waste Outlet)	-	200	-
7.5(Tap Holes)	-	200	-
7.6(OVERFLOW)	-	200	-
Clause no. 4(types)	-	100	-
Caluse no. 5("Material -Austenitic stainless steel of Grade Designation")	-	1000	-
Clause no. 6.1(Thickness of sheet)	-	500	-
Clause no. 6.2(Depth of Bowls)	-	200	-
Clause no. 6.3(Internal dimensions of bowls)	-	500	-
Clause no. 6.4(Bowl Locating Limits)	-	500	-
Clause no. 6.5, Table No. 1(Dimension of the sink)	-	500	-
Clause no. 7(Construction and workmanship)	-	100	-
Clause no. 8(Finish)	-	100	-
Clause no. 9(Mark)	-	100	-

14 Jan, 2029

-
Included w.e.f 01.04.2026

797

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1835 (1976)

Specification for round steel wire for ropes (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	7500	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	7500	-
Cl 11.2(Workmanship)	-	7500	-
Cl 11.3(Coating Test)	-	7500	-
Cl 12.2(UTM)	-	7500	-
Cl 12.3(Torsion)	-	7500	-
Cl 12.4(Reverse Bend)	-	7500	-
Cl 12.5(Wrap)	-	7500	-
Cl 12.6(Adhesion )	-	7500	-
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 3(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 10(Diameter)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 12.6(Adhesion )	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 10(Diameter)	-	0	-
Cl 8(Manufacturing )	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 3(Manufacturing )	-	0	-
Cl 12.6(Adhesion)	-	0	-
Cl 12.5(Wrap)	-	0	-
Cl 12.4(Reverse Bend)	-	0	-
Cl 12.3(Torsion)	-	0	-
Cl 12.2(UTM)	-	0	-
Cl 11.3(Coating Test)	-	0	-
Cl 11.2(Workmanship)	-	0	-
Cl 10(Diameter)	-	0	-
Cl 8(Manufacturing)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 3(Manufacturing)	-	0	-
Cl. 5.1, T-1(C)	-	7500	-
Cl. 5.1, T-1(Mn)	-	7500	-
Cl. 5.1, T-1(Si)	-	7500	-
Cl. 5.1, T-1 ( Grade 1)(S)	-	7500	-
Cl. 5.1, T-1 ( Grade 2)(S)	-	7500	-
Cl. 5.1, T-1 ( Grade 3)(S)	-	7500	-
Cl. 5.1, T-1 ( Grade 4)(S)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(S)	-	7500	-
Cl. 5.1, T-1 ( Grade 1)(P)	-	7500	-
Cl. 5.1, T-1(C)	-	7500	-
Cl. 5.1, T-1(Mn)	-	7500	-
Cl. 5.1, T-1(Si)	-	7500	-
Cl. 9.1, T-3(Uniformity)	-	7500	-
Cl. 5.1, T-1 ( Grade 3)(P)	-	7500	-
Cl. 9.1, T-3(Mass of Zinc Coating)	-	7500	-
Cl. 5.1, T-1 ( Grade 4)(P)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cr)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(P)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cr)	-	7500	-
Cl. 5.1, T-1 ( Grade 1)(Cu)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cr)	-	7500	-
Cl. 5.1, T-1 ( Grade 2)(Cu)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cr)	-	7500	-
Cl. 5.1, T-1 ( Grade 3)(Cu)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cr)	-	7500	-
Cl. 5.1, T-1 ( Grade 4)(Cu)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Cu)	-	7500	-
Cl. 5.1, T-1 ( Grade 5)(Ni)	-	7500	-
Cl. 5.1, T-1 ( Grade 1)(Ni)	-	7500	-
Cl. 5.1, T-1 ( Grade 4)(Ni)	-	7500	-
Cl. 5.1, T-1 ( Grade 3)(Ni)	-	7500	-
Cl. 5.1, T-1 ( Grade 2)(Ni)	-	7500	-

-
Included w.e.f. 26.02.2026

798

Samridhi Test House Pvt. Ltd.

8184706

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Shell)	-	100	-
4.5(Metal Parts)	-	800	-
4.6(Visor)	-	0	-
6.1(General)	-	100	-
6.2(Shell)	-	100	-
6.3(Protactive Padding)	-	200	-
6.4(Retention System)	-	300	-
6.7(Peripheral Vision)	-	500	-
6.8(Workmanship and Finish)	-	300	-
7.0(Tests for Helmets)	-	10600	-
7.2(Impact Absorption Test)	-	1500	-
7.3(Rigidity Test)	-	500	-
7.4(Projections and Surface Friction Test)	-	1500	-
7.5(Dynamic Test of Retention System)	-	500	-
7.6(Audibility Test)	-	900	-
7.5(Tests for Helmets)	-	0	Repeated Test
7.4(Tests for Helmets)	-	0	Repeated Test
7.3(Tests for Helmets)	-	0	Repeated Test
7.2(Tests for Helmets)	-	0	Repeated Test
7(Tests for Helmets)	-	0	Repeated Test
6.8(Workmanship and Finish)	-	0	Repeated Test
6.7(Constructional Requirements)	-	0	Repeated Test
6.4(Constructional Requirements)	-	0	Repeated Test
6.3(Constructional Requirements)	-	0	Repeated Test
6.2(Constructional Requirements)	-	0	Repeated Test
6.1(Constructional Requirements)	-	0	Repeated Test
5(Size)	-	100	-
4.6(Material)	-	0	Repeated Test
4.5(Material)	-	0	Repeated Test
4.1(Material)	-	0	Repeated Test
7.7(Retention Test of Helmet)	-	1000	-
7.8(Micro-Slip Test of the Chin Strap)	-	1000	-
7.9(Test for Resistance to Abrasion of the Chin Strap )	-	1000	-
7.10.1(Inadvertent Release by Pressure)	-	1000	-
7.10.2(Ease of Release)	-	500	-
7.10.3(Tests for Helmets)	-	1200	-
7.10.2(Tests for Helmets)	-	0	Repeated Test
7.10.1(Tests for Helmets)	-	0	Repeated Test
7.9(Tests for Helmets)	-	0	Repeated Test
7.7(Tests for Helmets)	-	0	Repeated Test
7.6(Tests for Helmets)	-	0	Repeated Test
7.10.3(Durability of Quick Release Mechanism)	-	0	Repeated Test
7.8(Tests for Helmets)	-	0	Repeated Test

-
-

799

MSME Testing Centre, New Delhi

8101204

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Nominal Size)	-	300	-
(Cl. 7)(Identification)	-	300	-
(Cl. 7)(Identification)	-	300	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8.4)(Minimum Thickness)	-	300	-
(Cl. 8.5)(Finish)	-	300	-
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	500	-
(Cl 9.2)(Drip Proofness Test)	-	1500	-
(Cl 9.3)(Thermal Shock Test )	-	500	-
(Cl 9.4)(Hydraulic Pressure Test)	-	1500	-
(Cl 9.5)(Mechanical Strength Characteristics)	-	1500	-
(Cl.6 , Table 3)(Dimensions)	-	1800	-

31 Dec, 2026

-
-

800

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 15573 (2018)

Polyaluminium chloride (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Description -)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(i)(Aluminium as Al2O3,)	-	1500	-
5.1.1, 5.1.2, 5.2, Table-1(ii)(Basicity)	-	1000	-
5.1.1, 5.1.2, 5.2, Table-1(iii)(Chloride (as Cl))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(iv)(Sulphates(as SO4))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(v)(Specific gravity)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(x)(Insoluble)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(xi)(Ph of 5% of solution)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(vii)(Bulk density)	-	500	-
5.1.1,5.1.2,5.2, Table-1, Toxic substances(Mercury(as Hg))	-	1200	-
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances(Arsenic(as As))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Cadmium(as Cd))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Lead(as Pb))	-	1200	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances(Iron(as Fe))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Manganese(as Mn))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Chromium (as Cr))	-	1200	-
5.1.1, 5.12, 5.2, Table-1, Toxic substances(Selenium (as Se))	-	1200	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (i)(Aluminium as Al2O3)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (ii)(Relative basicity)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iii)(Chloride as Cl)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iv)(Sulphate as SO4)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (vii)(Bulk Density)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (x)(Insolubles)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (xi)(pH of 5% of solution, w/v)	-	500	-

-
-

801

Samridhi Test House Pvt. Ltd.

8184706

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Grade / Type / Size / Designation

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	1000	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
6.3(Compound Properties)	-	2500	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	5000	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	2000	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	2000	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	2000	-
7.1.3 (Effective length)	-	2000	-
8(Pipe Ends)	-	500	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	500	-
9.1(Visual Appearance)	-	500	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	2000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	5000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	5000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	5000	-
5 Table 1(Classification of pipes)	-	1000	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	1000	-
6.3.3(Density)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	2000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	5000	-

-
-

802

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

ALL

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	7000	-
Cl 8(Press)	-	7000	-
Cl 9(Strainage Embrittlement)	-	7000	-
Cl 10(Erichsen Cupping)	-	7000	-
Cl 13(Length, Width & Thickness)	-	7000	-
Cl 7(UTM)	-	7000	-
Cl 8(Press)	-	7000	-
Cl 9(Strainage Embrittlement)	-	7000	-
Cl 10(Erichsen Cupping)	-	7000	-
Cl 13(Length, Width & Thickness)	-	7000	-
Cl 7(UTM)	-	7000	-
Cl 8(Press)	-	7000	-
Cl 9(Strainage Embrittlement)	-	7000	-
Cl 10(Erichsen Cupping)	-	7000	-
Cl 13(Length, Width & Thickness)	-	7000	-
6.1(Carbon %)	-	7000	-
6.1(Manganese %)	-	7000	-
6.1(Phosphorus %)	-	7000	-
6.1(Sulphur %)	-	7000	-
6.1(Silicon %)	-	7000	-
6.1(Nitrogen%)	-	7000	-
6.1( Aluminium %)	-	7000	-
6.1(Carbon %)	-	7000	-
6.1(Manganese %)	-	7000	-
6.1(Phosphorus %)	-	7000	-
6.1(Sulphur %)	-	7000	-
6.1(Silicon %)	-	7000	-
6.1(Nitrogen%)	-	7000	-
6.1( Aluminium %)	-	7000	-
6.1(Carbon %)	-	7000	-
6.1(Manganese %)	-	7000	-
6.1(Phosphorus %)	-	7000	-
6.1(Sulphur %)	-	7000	-
6.1(Silicon %)	-	7000	-
6.1(Nitrogen%)	-	7000	-
6.1( Aluminium %)	-	7000	-
Cl. 13(Out of square)	-	7000	-
Cl. 13(Flatness)	-	7000	-
Cl. 13(Camber)	-	7000	-
Cl. 13(Width)	-	7000	-
Cl. 13(Thickness)	-	7000	-
Cl. 12(Freedom from defects)	-	7000	-
Cl. 7.2 Table 3(Elongation)	-	7000	-
Cl. 7.2 Table 3(Yield Stress)	-	7000	-
Cl 13(Length, Width & Thickness)	-	7000	-
Cl 10(Erichsen Cupping)	-	7000	-
Cl 9(Strainage Embrittlement)	-	7000	-
Cl 8(Press)	-	7000	-
Cl 7(UTM)	-	7000	-
Cl 7(UTM)	-	7000	-
Cl 8(Press)	-	7000	-
Cl 9(Strainage Embrittlement)	-	7000	-
Cl 10(Erichsen Cupping)	-	7000	-
Cl 13(Length, Width & Thickness)	-	7000	-
6(Niobium as Nb)	-	7000	-
6(Titanium as Ti)	-	7000	-
6(Vanadium as V)	-	7000	-
6(Micro alloying elements)	-	7000	-
7(Tensile Strength-IS:1608(P1))	-	7000	-
7(Yield Strength-IS:1608(P1))	-	7000	-
7(Elongation -IS:1608(P1))	-	7000	-
12(Freedom from defects)	-	7000	-
13(Length - SOP MT-23)	-	7000	-
13(Width-SOP MT-23)	-	7000	-
13(Thickness - SOP MT-23)	-	7000	-
13(Mass)	-	7000	-
15(Marking)	-	0	-

-
Included w.e.f. 26.02.2026

803

Samridhi Test House Pvt. Ltd.

8184706

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Polyethylene Pipes for Water Supply - Specification

19400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2500	-
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	2000	-
8.7(Density)	-	1500	-
8.5 (Oxidation Induction Time)	-	1500	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	2000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	4000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	32000	-
7.4.1.2(Ovality)	-	1000	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	2000	-
7.2(Length)	-	1000	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	1000	-
8.3(Carbon black)	-	2000	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	2000	-
5.3(d)(Carbon Black Master Batch)	-	2000	-
5.3(c)(Carbon Black Master Batch)	-	2000	-
5.3(b)(Carbon Black Master Batch)	-	2000	-
5.3 (a)(Carbon Black Master Batch)	-	2000	-
5.2(Polyethylene Resin)	-	5000	-
5, 5.1 table-1(MATERIALS)	-	5000	-
7()	-	2000	-
5.2(Density)	-	2000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1000	-
5.2(Volatile matter Content)	-	1500	-
5.3(Toluene Extract)	-	2000	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	2000	-
Clause 8.3(Carbon Black Dispersion)	-	2000	-
Clause 8.6(Overall migration (stimulate))	-	2000	-
Clause 8.6(Overall migration (surface of material))	-	2000	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2000	-
Cl. 8.3(Carbon Black Content)	-	2000	-
Cl. 8.3(Carbon Black Dispersion)	-	2000	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	-
8.7(Density-IS 7328:2020)	-	1000	-
8.7(Corrected Density- IS 7328:2020)	-	1000	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	2000	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	2000	-
Cl 8.3(Carbon Black Content)	-	2000	-
Cl 8.3(Carbon Black Dispersion)	-	2000	-

-
-

804

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 11329 (2018)

Finned type heat exchanger for room air conditioner (First Revision)

All Type as mentioned in Indian Standards Specification

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CLASSIFICATION AND NOMENCLATURE)	-	500	-
5(MATERIALS)	-	500	-
6(QUALITY REQUIREMENTS)	-	0	-
7(TESTING)	-	0	-
7.1("Permissible Assembly Contamination Specification")	-	0	-
7.1.1(Internal Contamination)	-	40000	-
7.2(Pressure Test for Assembly Tightness)	-	40000	-
7.2.1(Water Leak Test)	-	0	-
7.2.2(Helium Leak Test)	-	0	-
7.2.3(Vacuum Leak Test Process)	-	40000	-
7.3(Test for Mechanical Strength)	-	0	-
7.3.1(Burst Test)	-	40000	-
7.3.2(Fatigue Strength Test)	-	40000	-
7.4(Test for Corrosion Resistance)	-	60000	-
8(MARKING)	-	1000	-
9()	-	0	-
9.1(Type Test)	-	0	-
9.2(Routine Tests)	-	0	-
7.4.5.2 a(Test requirement)	-	0	-
8.1(Marking of Finned Type Heat Exchanger)	-	0	-
7.4.5.2(Test requirement)	-	0	-
6.2.1.5(Brazing material selection)	-	0	-
6.2.1.4(Expanded fin tightness)	-	0	-
6.2.1.3(Tube sheet/End plate)	-	0	-
6.2.1.1(Hairpin tube)	-	0	-
6.1(Workmanship)	-	0	-
5.3 b(Tube Sheet /End Plate)	-	0	-
5.3 a(Tube Sheet /End Plate)	-	0	-
5.2 a(Fin Material)	-	0	-
5.1 a(Copper Tube)	-	0	-
5.1(Tube Material)	-	0	-
4.1.2(Micro Channel Aluminium Tube and Aluminium fin heat exchanger(MCHE))	-	0	-
4.1.1.4(Enhanced fin surfaces)	-	0	-
4.1.1.2(Copper inner groove/micro groove tube and aluminium fin)	-	0	-
4.1.1(Fin Pack with Collar and Tube Type)	-	0	-

15 Jul, 2028

-
-

805

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

Direct Evaporative Air Cooler

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	5000	-
Cl-5.2(Filter Pads)	-	1000	-
Cl-5.3(Sump Tank Capacities)	-	5000	-
Cl-5.4(Blower/Fan)	-	1000	-
Cl-5.4.3(Fan motor)	-	0	-
Cl-5.5(Pump Set)	-	0	-
Cl-5.6.1(Electrical wiring and connection)	-	5000	-
Cl-5.6.2(Suitable power cable)	-	1000	-
Cl-5.7(Switches)	-	0	-
Cl-6(Rating Requirement)	-	5000	-
Cl-8.1(Performance Requirement)	-	25000	-
Cl-8.2(Sound Test)	-	25000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	25000	-
Cl-8.4(Cooling Efficiency Test)	-	30000	-
Cl-8.5(Power Consumption)	-	20000	-
Cl-8.6(EER Calculation Method)	-	30000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	10000	-
Cl-12.2.1(General Running Tests)	-	5000	-
Cl-12.2.2(Protection against Electric Shock)	-	10000	-
Cl-12.2.3(High Voltage Tests)	-	10000	-
Cl-12.2.4(Leakage Current)	-	10000	-
Cl-12.2.5(Provision for Earthing)	-	10000	-
Cl-12.2.6(Finish)	-	5000	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	5000	-

15 Jul, 2028

-
-

806

CIMEC Infralabs Private Limited

8195606

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

Nominal Size: 2.65 mm to 10 mm wire diameter

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	100	-
Cl 5 & 6(Diameter)	-	200	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-
Cl 4.1(Workmanship)	-	100	-
Cl 5 & 6(Diameter)	-	200	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-
Cl 4.1(Workmanship)	-	100	-
Cl 5 & 6(Diameter)	-	200	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-
Clause 3.1.1(Sulphur)	-	400	-
Clause 3.1.1(Phosphorus)	-	400	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	1000	-
Cl. 6.2(Length)	-	100	-
Clause 3(Nitrogen)	-	800	-
Clause 3(Nitrogen)	-	800	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	500	-
Clause 7.1(Proof Stress (0.2 percent ))	-	1000	-
Clause 7.1(Ultimate Tensile Stress)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-
Cl 7(UTM)	-	1000	-
Cl 5 & 6(Diameter)	-	200	-
Cl 4.1(Workmanship)	-	100	-
10(Marking)	-	100	-
7.0 & 7.1(0.2% Proof Strength - IS: 1608 (P1))	-	1000	-
7.0 & 7.1(Elongation on SoA 5.65mm GL - IS: 1608 (P1))	-	500	-
Clause 7.1(Ultimate tensile stress)	-	1000	-

14 Jan, 2029

-
-

807

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
6.1(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	7500	-
4(Freedom from defects)	-	7500	-
7.1(Hardenability)	-	7500	-
7.2(Grain Size)	-	7500	-
7.3(Macro examination)	-	7500	-
7.4(Decarburisation)	-	7500	-
7.5(Hardness)	-	7500	-
7.6.2(i) Yield stess/.2% Proof stress, Mpa)	-	7500	-
7.6.2(ii)Ultimate Tensile Strength, Mpa)	-	7500	-
7.6.2(iii)Elongation, %)	-	7500	-
7.6.2(iv) Reduction in area)	-	7500	-
9(Rolling Tolerances)	-	7500	-
Cl. 6.1(Nickel)	-	7500	-
Cl. 6.1(Molybdenum)	-	7500	-
Cl. 6.1(Chromium)	-	7500	-
Cl. 6.1(Silicon)	-	7500	-
Cl. 6.1(Sulphur)	-	7500	-
Cl. 6.1(Phosphorus)	-	7500	-
Cl. 6.1(Manganese)	-	7500	-
Cl. 6.1(Carbon)	-	7500	-

-
Included w.e.f. 26.02.2026

808

Delhi Analytical Research Laboratory

8169106

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

ALL

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 (Z) )	-	0	-
table 1 sl.no: 02(20 (Z) )	-	0	-
table 1 sl.no: 03(25 (Z) )	-	0	-
table 1 sl.no: 04(32 (Z) )	-	0	-
table 1 sl.no: 05(40 (Z) )	-	0	-
table 1 sl.no: 06(50 (Z) )	-	0	-
table 1 sl.no: 07(63 (Z) )	-	0	-
table 1 sl.no: 08(75 (Z) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z) )	-	0	-
table 1 sl.no: 11(125 (Z) )	-	0	-
table 1 sl.no: 12(140 (Z) )	-	0	-
table 1 sl.no: 13(160(z))	-	0	-
table 1 sl.no: 01(16 (Z1) )	-	0	-
table 1 sl.no: 02(20 (Z1) )	-	0	-
table 1 sl.no: 03(25 (Z1) )	-	0	-
table 1 sl.no: 04(32 (Z1) )	-	0	-
table 1 sl.no: 05(40 (Z1) )	-	0	-
table 1 sl.no: 06(50 (Z1) )	-	0	-
table 1 sl.no: 07(63 (Z1) )	-	0	-
table 1 sl.no: 08(75 (Z1) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z1) )	-	0	-
table 1 sl.no: 11(125 (Z1) )	-	0	-
table 1 sl.no: 12(140 (Z1) )	-	0	-
table 1 sl.no: 13(160(z1))	-	0	-
2.1(General)	-	3000	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	200	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	200	-
2.2.3( inside diameter of the socket)	-	200	-
2.2.3(Socket length)	-	200	-
6.1.1(VCM Content Test)	-	2500	-
2.2.2 table 1(Laying length)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	200	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-
2.1(General)	-	0	-
6.1.1(VCM Content Test)	-	2500	-
2.2.2 table 1(Laying length)	-	0	-

-
Included w.e.f. 24.02.2026

809

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

8166826

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	400	-
6(Classification- IS 302-1)	-	400	-
5(General conditions for the tests)	-	400	-
11.8(Temperature rise)	-	400	-
11.7(Duration corresponding)	-	400	-
11.6(Combined appliances)	-	400	-
11.5(Motor-operated appliances)	-	400	-
11.4(Heating appliances)	-	400	-
8.1.5(Live parts of built-in appliances)	-	400	-
17(Overload protection of transformers and associated circuits)	-	400	-
16(Leakage current and electric strength)	-	400	-
4(General requirement)	-	400	-
31(Resistance to Rusting)	-	400	-
30.2(Needle Flame Test)	-	400	-
30.2(Glow Wire Test)	-	400	-
30.1(Ball pressure test)	-	400	-
29(clearance, creepage distances and solid insulation)	-	400	-
28(Screw test and connections)	-	400	-
27.1(Provision for Earthing, IS 302-1)	-	400	-
26(Terminals for external conductors)	-	400	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
24(Components)	-	400	-
23.1(Internal Wiring, IS 302-1)	-	400	-
22.1(Construction, IS 302-1)	-	400	-
21.1(Mechanical Strength, IS 302-1)	-	400	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	400	-
19(Abnormal Operation)	-	400	-
17(Over Load Protection of Transformers and associated circuits)	-	400	-
16.3(Electric Strength (after clause 15 and 16.2))	-	400	-
16.2(Leakage Current (after Clause 15))	-	400	-
16.1(General)	-	400	-
16.0(General)	-	400	-
15.3(Humidity Test)	-	400	-
15.2(Spillage Test)	-	400	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	400	-
15.0(Moisture resistance)	-	400	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	400	-
13.2(Leakage current at operating temperature)	-	400	-
13(Leakage current and electric strength at operating temperature)	-	400	-
11.3(Heating)	-	400	-
11.2(General)	-	400	-
11.1(General)	-	400	-
10.2(Current input)	-	400	-
10.1(Power input)	-	400	-
9(Starting of motor operation test requirements and tests)	-	400	-
8.1.4(Protection against live parts against protective impedance)	-	400	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	400	-
8.1.2(Protection against live parts in openings)	-	400	-
8.1.1(Protection against live parts in all positions)	-	400	-
7(Marking and instructions)	-	400	-
A.2(Earth continuity test)	-	400	-
Annex C(Ageing test on motors)	-	400	-
Annex D(Thermal motor protectors)	-	400	-
15.2(Moisture resistance)	-	400	-
19.17(Abnormal Operation, IS 302-1)	-	400	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	400	-
21.2(Mechanical Strength, IS 302-1)	-	400	-
21.3(Mechanical Strength, IS 302-1)	-	400	-
22.5(Construction)	-	400	-
22.6(Construction, IS 302-1)	-	400	-
22.11(Construction, IS 302-1)	-	400	-
22.42(Construction)	-	400	-
23.3(Internal Wiring, IS 302-1)	-	400	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	400	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	400	-
26.5(Terminals for external conductors)	-	400	-
27.5(Provision for Earthing, IS 302-1)	-	400	-
28.1(Screws and connections)	-	400	-
22.2(Construction, IS 302-1)	-	400	-
22.3(Construction, IS 302-1)	-	400	-
B.22.4(Construction, IS 302-1)	-	400	-
B.22.5(Construction, IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.1(Marking- IS 302-1)	-	400	-
7.3(Marking- IS 302-1)	-	400	-
7.4(Marking- IS 302-1)	-	400	-
7.5(Marking- IS 302-1)	-	400	-
7.6(Marking- IS 302-1)	-	400	-
7.7(Marking- IS 302-1)	-	400	-
7.8(Marking- IS 302-1)	-	400	-
7.9(Marking- IS 302-1)	-	400	-
7.1O(Marking- IS 302-1)	-	400	-
7.11(Marking- IS 302-1)	-	400	-
7.12(Marking- IS 302-2-15)	-	400	-
7.13(Marking- IS 302-1)	-	400	-
7.15(Marking- IS 302-1)	-	400	-
6(Classification- IS 302-1)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	400	-
11(Heating, IS 302-1, Table -3)	-	55	-
11(Heating, IS 302-1)	-	55	-
19.7(Abnormal Operation, IS 302-1)	-	55	-
19.8(Abnormal Operation, IS 302-1)	-	55	-
19.9(Abnormal Operation, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	55	-
19.17(Abnormal Operation, IS 302-1)	-	55	-
22.7(Construction, IS 302-1)	-	55	-
22.9(Construction, IS 302-1)	-	55	-
22.10(Construction, IS 302-1)	-	55	-
22.12(Construction, IS 302-1)	-	55	-
22.14(Construction, IS 302-1)	-	55	-
22.15(Construction, IS 302-1)	-	55	-
22.18(Construction, IS 302-1)	-	55	-
22.19(Construction, IS 302-1)	-	55	-
22.21(Construction, IS 302-1)	-	55	-
22.22(Construction, IS 302-1)	-	55	-
22.24(Construction, IS 302-1)	-	55	-
22.25(Construction, IS 302-1)	-	55	-
22.28(Construction, IS 302-1)	-	55	-
22.31(Construction, IS 302-1)	-	55	-
22.34(Construction, IS 302-1)	-	55	-
22.35(Construction, IS 302-1)	-	55	-
22.36(Construction, IS 302-1)	-	55	-
22.37(Construction, IS 302-1)	-	55	-
22.38(Construction, IS 302-1)	-	55	-
22.40(Construction, IS 302-1)	-	55	-
22.41(Construction, IS 302-1)	-	55	-
22.43(Construction, IS 302-1)	-	55	-
22.43(Construction, IS 302-1)	-	55	-
22.44(Construction, IS 302-1)	-	55	-
22.49(Construction, IS 302-1)	-	55	-
22.54(Construction, IS 302-1)	-	55	-
22.55(Construction, IS 302-1)	-	55	-
22.58(Construction, IS 302-1)	-	55	-
22.59(Construction, IS 302-1)	-	55	-
22.60(Construction, IS 302-1)	-	55	-
22.61(Construction, IS 302-1)	-	55	-
23.2(Internal Wiring, IS 302-1)	-	55	-
23.4(Internal Wiring, IS 302-1)	-	55	-
23.6(Internal Wiring, IS 302-1)	-	55	-
23.7(Internal Wiring, IS 302-1)	-	55	-
23.8(Internal Wiring, IS 302-1)	-	55	-
23.9(Internal Wiring, IS 302-1)	-	55	-
23.10(Internal Wiring, IS 302-1)	-	55	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	55	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	55	-
27.2(Provision for Earthing, IS 302-1)	-	55	-
27.3(Provision for Earthing, IS 302-1)	-	55	-
27.4(Provision for Earthing, IS 302-1)	-	55	-
27.6(Provision for Earthing, IS 302-1)	-	55	-
18(Endurance)	-	55	-
18(Endurance)	-	1205	-

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 22.16 (Construction), 22.32 (Construction, IS 302-1), 24 (Components)32.2 (Radiation, toxicity and similar hazards, is 302-1)

810

MICRO, SMALL & MEDIUM ENTERPRISES - TESTING CENTRE (MSME), KOLKATA

5108204

IS 2932 (2025)

Air Drying Enamel Paint for Architectural and Industrial Applications - Specification (Fifth Revision)

nil

34500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Colour Categories and Wet Opacity)	-	1000	-
Cl-6.1.1(Composition- General)	-	1000	-
Cl-6.1.2(Total Non-Volatile Content)	-	1000	-
Cl-6.2.1(At Delivery)	-	1000	-
Cl-6.2.2(During Storage)	-	1000	-
Cl-6.3(Freedom from Coarse Particles)	-	1000	-
Cl-6.4(Skin Formation)	-	1000	-
Cl-6.5(Thinning Properties)	-	1000	-
Cl-6.6(Application Properties)	-	1000	-
Cl-6.7.2(Optional Durability Requirements)	-	5500	-
Cl-6.7.1, 6.8, Table-2 (i)(a) Consistency)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (i)(b) Viscosity by ford cup No. 4 or 5 at(27 ± 2) ℃, s (seeNote 1))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ii)(Mass, in kg/10 litre, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max a) Surface dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max b) Hard dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max c) Tack free")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iv)(Finish)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (v)(Gloss 60°)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vi)("Fineness of grind, microns, Max (byHegmann gauge, Min scale 0 to 8)")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vii)(Colour)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion b) Bend test after 96 h of air drying with 6.25 mm in type 1 apparatus")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ix)(Flash point)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (x)(Volume solids percent, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xi)(Resistance to acid (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xii)(Resistance to alkali (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiii)(Accelerated storage stability test)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(a) Degree of blistering, less than equal to)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(b) Degree of rusting, less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(c) Degree of cracking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(d) Degree of flaking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(e) Degree of chalking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(f) Degree of colour change, ΔE, Max)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(g) Gloss retention 60°, percentage of original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xv)(Resistance to water for duration of 48 h, percentage of gloss retention in comparisonwith original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xvi)(Lead (including compounds of lead), Max)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xvii)(Volatile organic compound (VOC) gm/l, Max)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xviii)(Keeping properties)	-	5000	-
Cl-6.9, Table-3 (i)(Resistance to Humidity,test)	-	2500	-
Cl-6.9, Table-3 (ii)(Resistance to transformer oil (see IS 335) at 90 ℃for 48 h)	-	1000	-
Cl-6.9, Table-3 (iii)("Drying time, h, Max: a) Hard dry at 70 ℃ with 15 min flash")	-	1000	-
Cl-6.9, Table-3 (iv)(Gloss 60°, Min.)	-	1000	-
Cl-6.9, Table-3 (v)(Scratch hardness (at load 1.2 kg), after 48 h air drying)	-	1000	-
Cl-6.9, Table-3 (vi) (a)(" Pigment content, percent by mass, Min, (except azure blue, oxford blue, golf red, post office red, and black colours);")	-	1000	-
Cl-6.9, Table-3 (vi) (b)(b) Non-volatile vehicle, percent by mass, Min; and)	-	1000	-
Cl-6.9, Table-3 (vi) (c)(c) Phthalic anhydride content of nonvolatile vehicle, percent by mass, Min.)	-	1000	-
Cl-6.9, Table-3 (vii)(Wet abrasion test)	-	1000	-
Cl-12(Marking)	-	1000	-

-
Included w.e.f. 13.03.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number