BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11761 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

841

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4508 (2024)

OPEN ENDED SLUGGING WRENCHES ( SPANNERS ) - SPECIFICATION ( Second Revision )

All Grade / Type / Size / Designation as per IS 4508:2024

3550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimensions)	-	1200	-
Clause.4.0(Carbon)	-	100	-
Clause.4.0(Sulphur)	-	100	-
Clause.4.0(Phosphorus)	-	100	-
Clause.4.0(Nickel)	-	120	-
Clause.4.0(Molybdenum)	-	120	-
Clause.4.0(Chromium)	-	120	-
Clause.4.0(Silicon)	-	100	-
Clause.4.0(Manganese)	-	100	-
Clause.5.0(Hardness)	-	250	-
Clause.6.0(Manufacture,Workmanship & finish)	-	500	-
Clause.7.0(Preservation & packing)	-	500	-
Clause.8.0(Sampling)	-	120	-
Clause.9.0(Designation)	-	120	-
Clause.10.0(Marking)	-	0	-

17 Feb, 2028

-
Included w.e.f.10.06.2025

842

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

ALL

53000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2, Table 4(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7, Table 20("Marking ")	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-

08 May, 2028

-
Included w.e.f 04.08.2025

843

Rajkot Metlab Services LLP, Rajkot

7183706

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

9990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	100	-
9.2(Workmanship & Finish)	-	100	-
9.3(Workmanship & Finish)	-	100	-
11.1(Dimensions - Height)	-	200	-
11.1(Dimensions - Width)	-	200	-
11.1(Dimensions - Thickness)	-	200	-
11.1(Dimensions - Variation in thickness)	-	200	-
11.1(Dimensions - Squareness)	-	200	-
11.12(End immersion test)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	500	-
4(GRADE)	-	100	-
4(TYPE)	-	100	-
5(SIZES)	-	100	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	100	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	100	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	100	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	100	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	100	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	100	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	100	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	100	-
9.1(WORKMANSHIP AND FINISH)	-	100	-
9.2(WORKMANSHIP AND FINISH)	-	100	-
9.3(WORKMANSHIP AND FINISH)	-	100	-
11.1(Dimensions and Squareness Test)	-	200	-
11.1(Dimensions and Squareness Test)	-	200	-
11.1(Dimensions and Squareness Test)	-	200	-
11.1(Dimensions and Squareness Test)	-	200	-
11.1(Dimensions and Squareness Test)	-	200	-
11.2(General Flatness Test)	-	500	-
11.2(General Flatness Test)	-	500	-
11.2(General Flatness Test)	-	500	-
11.3(Local Planeness Test)	-	500	-
11.4(Impact Indentation Test)	-	500	-
11.4(Impact Indentation Test)	-	500	-
11.5(Flexure Test)	-	500	-
11.5(Flexure Test)	-	500	-
11.6(Edge Loading Test)	-	500	-
11.6(Edge Loading Test)	-	500	-
11.6(Edge Loading Test)	-	500	-
11.6(Edge Loading Test)	-	500	-
11.7.1(Shock Resistance Test)	-	500	-
11.7.2(Shock Resistance Test)	-	500	-
11.8(Buckling Test)	-	500	-
11.8(Buckling Test)	-	500	-
11.8(Buckling Test)	-	500	-
11.9.2(Slamming Test)	-	500	-
11.9.3(Slamming Test)	-	500	-
11.10(Misuse Test)	-	500	-
11.11(Varying Humidity Test)	-	500	-
11.11(Varying Humidity Test)	-	500	-
11.12(End Immersion Test)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	500	-
Clause 4.2(grades specified)	-	100	-
Clause 5(SIZES)	-	100	-
Clause 6.1.1(species of timber)	-	100	-
Clause 6.1.2(list of species)	-	100	-
Clause 6.1.3(moisture content)	-	500	-
Clause 6.2.1(Plywood)	-	100	-
Clause 6.2.2(Decorative plywood)	-	100	-
Clause 6.3(Cross-Bands)	-	100	-
Clause 6.4.1(Commercial Face Veneers)	-	100	-
Clause 6.4.2(Decorative Face Veneers)	-	100	-
Clause 6.6.1(Adhesives)	-	100	-
Clause 6.7(Particle Board)	-	100	-
Clause 6.8(Medium density fibre board)	-	100	-
Clause 6.9(Alternative Materials)	-	100	-
Clause 7.1(Blockboard Core)	-	100	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	100	-
Clause 7.3(Stiles and Rails)	-	100	-
Clause 7.4(Levelling)	-	100	-
Clause 7.5(Face Panel)	-	100	-
Clause 7.6(Lipping)	-	100	-
Clause 7.7(Rebating)	-	100	-
Clause 7.8(Opening for Glazing)	-	100	-
Clause 7.9(Venetian)	-	100	-
Clause 8.1(Locks)	-	100	-
Clause 9(WORKMANSHIP AND FINISH)	-	100	-
Clause 10.1(Classification of Tests)	-	100	-
Clause 11.1(Dimensions and Squareness Test)	-	200	-
Clause 11.2(General Flatness Test)	-	200	-
Clause 11.3(Local Planeness Test)	-	200	-
Clause 11.4(Impact Indentation Test)	-	500	-
Clause 11.5(Flexure Test)	-	500	-
Clause 11.6(Edge Loading Test)	-	500	-
Clause 11.7(Shock Resistance Test)	-	500	-
Clause 11.8(Buckling Resistance Test)	-	500	-
Clause 11.9(Slamming Test)	-	500	-
Clause 11.10(Misuse Test)	-	500	-
Clause 11.11(Varying Humidity Test)	-	500	-
Clause 11.12(End Immersion Test)	-	500	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	500	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	500	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	100	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	100	-
Clause 14(Marking)	-	100	-
4(Grade, Type and Construction)	-	100	-
5(Sizes and Thickness)	-	200	-
6.1(Timber)	-	100	-
6.2(Plywood for flush door shutter)	-	100	-
6.3(Cross-Bands )	-	100	-
6.4.1(Commercial Face Veneers)	-	100	-
6.4.2(Decorative face veneers)	-	100	-
6.6(Adhesives)	-	100	-
6.7(Particle Board)	-	100	-
6.8(Medium Density Fibre)	-	100	-
6.9(Alternative Materials)	-	100	-
7(Construction)	-	100	-
8.1(Locks)	-	100	-
8.2(Other Fittings)	-	100	-
9(Workmanship and Finish)	-	100	-
10(Tests)	-	100	-
11.1(Dimensions and Squareness Test)	-	200	-
11.2(General Flatness Test)	-	500	-
11.3(Local Planeness Test)	-	500	-
11.4(Impact Indentation Test)	-	500	-
11.5(Flexure Test)	-	500	-
11.6(Edge Loading Test)	-	500	-
11.7(Shock Resistance Test)	-	500	-
11.8(Buckling Resistance Test)	-	500	-
11.9(Slamming Test)	-	500	-
11.1(Misuse Test)	-	500	-
11.11(Varying Humidity Test)	-	500	-
11.12(End Immersion Test)	-	500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	500	-
11.15(Screw Withdrawal Resistance Test)	-	500	-
14(Marking )	-	100	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	100	-
9.1(Workmanship & Finish)	-	-	-
9.2(Workmanship & Finish)	-	-	-
9.3(Workmanship & Finish)	-	-	-
11.1(Dimensions - Height)	-	-	-
11.1(Dimensions - Width)	-	-	-
11.1(Dimensions - Thickness)	-	-	-
11.1(Dimensions - Variation in thickness)	-	-	-
11.1(Dimensions - Squareness)	-	-	-
11.12(End immersion test)	-	-	-
11.13(Knife Test)	-	-	-
11.14(Glue Adhesion Test)	-	-	-
4(GRADE)	-	-	-
4(TYPE)	-	-	-
5(SIZES)	-	-	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	-	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	-	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	-	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	-	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	-	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	-	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	-	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	-	-
9.1(WORKMANSHIP AND FINISH)	-	-	-
9.2(WORKMANSHIP AND FINISH)	-	-	-
9.3(WORKMANSHIP AND FINISH)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.2(General Flatness Test)	-	-	-
11.2(General Flatness Test)	-	-	-
11.2(General Flatness Test)	-	-	-
11.3(Local Planeness Test)	-	-	-
11.4(Impact Indentation Test)	-	-	-
11.4(Impact Indentation Test)	-	-	-
11.5(Flexure Test)	-	-	-
11.5(Flexure Test)	-	-	-
11.6(Edge Loading Test)	-	-	-
11.6(Edge Loading Test)	-	-	-
11.6(Edge Loading Test)	-	-	-
11.6(Edge Loading Test)	-	-	-
11.7.1(Shock Resistance Test)	-	-	-
11.7.2(Shock Resistance Test)	-	-	-
11.8(Buckling Test)	-	-	-
11.8(Buckling Test)	-	-	-
11.8(Buckling Test)	-	-	-
11.9.2(Slamming Test)	-	-	-
11.9.3(Slamming Test)	-	-	-
11.10(Misuse Test)	-	-	-
11.11(Varying Humidity Test)	-	-	-
11.11(Varying Humidity Test)	-	-	-
11.12(End Immersion Test)	-	-	-
11.13(Knife Test)	-	-	-
11.14(Glue Adhesion Test)	-	-	-
11.15(Screw Withdrawal Resistance Test)	-	-	-
11.15(Screw Withdrawal Resistance Test)	-	-	-
Clause 4.2(grades specified)	-	-	-
Clause 5(SIZES)	-	-	-
Clause 6.1.1(species of timber)	-	-	-
Clause 6.1.2(list of species)	-	-	-
Clause 6.1.3(moisture content)	-	-	-
Clause 6.2.1(Plywood)	-	-	-
Clause 6.2.2(Decorative plywood)	-	-	-
Clause 6.3(Cross-Bands)	-	-	-
Clause 6.4.1(Commercial Face Veneers)	-	-	-
Clause 6.4.2(Decorative Face Veneers)	-	-	-
Clause 6.6.1(Adhesives)	-	-	-
Clause 6.7(Particle Board)	-	-	-
Clause 6.8(Medium density fibre board)	-	-	-
Clause 6.9(Alternative Materials)	-	-	-
Clause 7.1(Blockboard Core)	-	-	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	-	-
Clause 7.3(Stiles and Rails)	-	-	-
Clause 7.4(Levelling)	-	-	-
Clause 7.5(Face Panel)	-	-	-
Clause 7.6(Lipping)	-	-	-
Clause 7.7(Rebating)	-	-	-
Clause 7.8(Opening for Glazing)	-	-	-
Clause 7.9(Venetian)	-	-	-
Clause 8.1(Locks)	-	-	-
Clause 9(WORKMANSHIP AND FINISH)	-	-	-
Clause 10.1(Classification of Tests)	-	-	-
Clause 11.1(Dimensions and Squareness Test)	-	-	-
Clause 11.2(General Flatness Test)	-	-	-
Clause 11.3(Local Planeness Test)	-	-	-
Clause 11.4(Impact Indentation Test)	-	-	-
Clause 11.5(Flexure Test)	-	-	-
Clause 11.6(Edge Loading Test)	-	-	-
Clause 11.7(Shock Resistance Test)	-	-	-
Clause 11.8(Buckling Resistance Test)	-	-	-
Clause 11.9(Slamming Test)	-	-	-
Clause 11.10(Misuse Test)	-	-	-
Clause 11.11(Varying Humidity Test)	-	-	-
Clause 11.12(End Immersion Test)	-	-	-
Clause 11.13(Knife Test)	-	-	-
Clause 11.14(Glue Adhesion Test)	-	-	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	-	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	-	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	-	-
Clause 14(Marking)	-	-	-
4(Grade, Type and Construction)	-	-	-
5(Sizes and Thickness)	-	-	-
6.1(Timber)	-	-	-
6.2(Plywood for flush door shutter)	-	-	-
6.3(Cross-Bands )	-	-	-
6.4.1(Commercial Face Veneers)	-	-	-
6.4.2(Decorative face veneers)	-	-	-
6.6(Adhesives)	-	-	-
6.7(Particle Board)	-	-	-
6.8(Medium Density Fibre)	-	-	-
6.9(Alternative Materials)	-	-	-
7(Construction)	-	-	-
8.1(Locks)	-	-	-
8.2(Other Fittings)	-	-	-
9(Workmanship and Finish)	-	-	-
10(Tests)	-	-	-
11.1(Dimensions and Squareness Test)	-	-	-
11.2(General Flatness Test)	-	-	-
11.3(Local Planeness Test)	-	-	-
11.4(Impact Indentation Test)	-	-	-
11.5(Flexure Test)	-	-	-
11.6(Edge Loading Test)	-	-	-
11.7(Shock Resistance Test)	-	-	-
11.8(Buckling Resistance Test)	-	-	-
11.9(Slamming Test)	-	-	-
11.1(Misuse Test)	-	-	-
11.11(Varying Humidity Test)	-	-	-
11.12(End Immersion Test)	-	-	-
11.13(Knife Test)	-	-	-
11.14(Glue Adhesion Test)	-	-	-
11.15(Screw Withdrawal Resistance Test)	-	-	-
14(Marking )	-	-	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	-	-

12 Jan, 2028

-
Included w.e.f.28.07.2025

844

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17550 : PART 3 (2021)

Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	135000	5% Discount for BIS
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No. 6 "("DETERMINATION OF ENERGY CONSUMPTION")	-	135000	5% Discount for BIS
"Cl. No.4.8 & Annex H "(Determination Of Volume)	-	135000	5% Discount for BIS
4.2(Steady State Power Consumption)	-	135000	5% Discount for BIS
4.3(Defrost and Recovery Energy and temperature change)	-	135000	5% Discount for BIS
4.4(Defrost Frequency)	-	135000	5% Discount for BIS
4.5(Number of Test Points and Interpolations)	-	135000	5% Discount for BIS
4.6(Load Processing Efficiency)	-	135000	5% Discount for BIS
4.7(Specified Auxiliaries)	-	135000	5% Discount for BIS
4.8(Volumn Determination)	-	135000	5% Discount for BIS
6(Determination of Energy Consumption)	-	135000	5% Discount for BIS
Annex B(Determination of Steady state Power & Temperature)	-	135000	5% Discount for BIS
Annex C(Defrost and Recovery Energy and temperature change)	-	135000	5% Discount for BIS
Annex D(Defrost Interval)	-	135000	5% Discount for BIS
Annex E(Interpolation of Results)	-	135000	5% Discount for BIS
Annex F(Energy Consumption of specified auxiliaries)	-	135000	5% Discount for BIS
Annex G(Determination of Load Processing Efficiency)	-	135000	5% Discount for BIS
Annex H(Determination of Volume)	-	135000	5% Discount for BIS

08 May, 2028

-
Included w.e.f.06.08.2025

845

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

345000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	345000	5% Discount for BIS
7(Cooling Capacity Test)	-	345000	5% Discount for BIS
8(Freezing Capacity Test)	-	345000	5% Discount for BIS
9("Automatic Ice-Making Capacity Test")	-	345000	5% Discount for BIS
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	345000	5% Discount for BIS
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	345000	5% Discount for BIS
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	345000	5% Discount for BIS
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	345000	5% Discount for BIS
6(Storage Test)	-	345000	5% Discount for BIS
7(Cooling Capacity Test)	-	345000	5% Discount for BIS
8(Freezing Capacity Test)	-	345000	5% Discount for BIS
9("Automatic Ice-Making Capacity Test")	-	345000	5% Discount for BIS
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	345000	5% Discount for BIS
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	345000	5% Discount for BIS
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	345000	5% Discount for BIS
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	345000	5% Discount for BIS

08 May, 2028

-
Included 06.08.2025

846

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 7231 (2021)

Plastic flushing cisterns for water closets and urinals - Specification (third revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Construction of Exposed Cistern)	-	15000	-
5.1.1(Construction of Exposed Cistern)	-	15000	-
5.1.1(Construction of Exposed Cistern)	-	15000	-
5.1.2(Construction of Cover)	-	15000	-
5.1.3(Construction of Flush Pipe)	-	15000	-
5.1.3.1(Flush pipe connection to cistern)	-	15000	-
5.1.3.1(Flush pipe connection to cistern)	-	15000	-
5.1.3.1(Flush pipe connection to cistern)	-	15000	-
5.1.3.1(Flush pipe connection to cistern)	-	15000	-
5.1.4(Inlet and Overflow Holes)	-	15000	-
5.1.5(Float Valve)	-	15000	-
5.1.6(Operating Mechanism (Push-Knob))	-	15000	-
5.1.6(Operating Mechanism (Push-Knob))	-	15000	-
5.1.7(Overflow Pipe)	-	15000	-
5.1.7.2(Overflow Pipe)	-	15000	-
5.1.7.3(Overflow Pipe)	-	15000	-
5.2.1(Concealed Cistern)	-	15000	-
5.2.1(Concealed Cistern- Construction)	-	15000	-
5.2.2(Flush Pipe)	-	15000	-
5.2.3(Operating Mechanism)	-	15000	-
5.2.3(Operating Mechanism)	-	15000	-
6, 6.1(Finish)	-	15000	-
6.1(Finish)	-	15000	-
6.1(Finish)	-	15000	-
6.2(Finish)	-	15000	-
7.1(Operational and Performance Requirement- Flushing Arrangement)	-	15000	-
7.2(Working Water Level)	-	15000	-
7.3(Freedom from Leakage)	-	15000	-
7.4(Reduced Water Level)	-	15000	-
7.5 (a)(Cistern Discharge Capacity 6/3 Litres)	-	15000	-
7.5 (a)(Cistern Discharge Capacity 6/3 Litres)	-	15000	-
7.5 (b)(Cistern Discharge Capacity 4.8/2.8 litres)	-	15000	-
7.5 (b)(Cistern Discharge Capacity 4.8/2.8 litres)	-	15000	-
7.5 (c)(Cistern Discharge Capacity 4/2 litres)	-	15000	-
7.5 (c)(Cistern Discharge Capacity 4/2 litres)	-	15000	-
7.6 (a)(Discharge Rate)	-	15000	-
7.6 (b)(Discharge Rate)	-	15000	-
7.6 (c)(Discharge Rate)	-	15000	-
7.6(Discharge Rate)	-	15000	-
8.1(Distortion Resistance Test)	-	15000	-
8.2(Dead Load Test)	-	15000	-
8.3(Front Thrust Test)	-	15000	-
8.4(Impact Test)	-	15000	-
8.4.1(Impact Test)	-	15000	-
9.3(Endurance Test)	-	15000	-

13 May, 2028

-
Included w.e.f.11.06.2025

847

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 12084 (2018)

Morpholine - Specification (First Revision)

ALL

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - Sl No - vi(Chloride ( as Cl ) I IS 3025 (Part 32)	-	500	-
4.3 - Table 1 - Sl No - x(Silica ( as SiO2 ) - IS 3025 (Part 35))	-	500	-
4.3 - Table 1 - Sl No - ix(Nickel ( as Ni ) - IS 3025 (Part 54))	-	500	-
4.3 - Table 1 - Sl No - viii(Copper ( as Cu ) - IS 3025 (Part 42))	-	500	-
4.3 - Table 1 - Sl No - vii(Iron ( as Fe ) - IS 3025 (Part 53))	-	500	-
4.3 - Table 1 - Sl No - vi(Ash content - Annex E)	-	500	-
4.3 - Table 1 - Sl No - v(Residue, on evaporation - Annex D)	-	500	-
4.3 - Table 1 - Sl No - iv(Boiling range for for 90 percent recovery - IS 5298)	-	500	-
4.3 - Table 1 - Sl No - iii(Colour (Pt-Co-Scale ) - IS 3025(Part 4))	-	500	-
4.3 - Table 1 - Sl No - ii(Relative density, 20/20 oC - Annex C)	-	500	-
4.3 - Table 1 - Sl No - i(Purity (as Morpholine) - Annex B)	-	500	-
4.2(IS 11255 (Part 6))	-	500	-
4.1(Description)	-	500	-
4.1(Requirement)	-	500	-
4.2(The material shall not contain any free ammonia, IS 11255 part-6)	-	500	-
5.1(Packing)	-	500	-
5.2(Marking)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 1(Purity (as Morpholine), percent by mass, Annex B)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 2(Relative density, 20/20oC, Annex C)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 3(Colour (Pt-Co-Scale ), IS 3025 part-4)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 4(Boiling range, IS 5298)	-	500	-
4.3 & 7.1 - Table -1, Sl no. 5(Residue, on evaporation, mg/l, Annex D)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 6(Ash content, g/100 ml, Annex E)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 7(Iron ( as Fe ), ppm, IS 3025 part 53)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 8(Copper ( as Cu ), ppm, IS 3025 (Part 42))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 9(Nickel ( as Ni ), ppm, IS 3025 (Part 54))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 10(Silica ( as SiO2 ), ppm, IS 3025 (Part 35))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 11(Chloride ( as Cl), ppm, IS 3025 (Part 32))	-	0	-
4.1(Requirement)	-	0	-
4.2(The material shall not contain any free ammonia, IS 11255 part-6)	-	0	-
5.1(Packing)	-	0	-
5.2(Marking)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 1(Purity (as Morpholine), percent by mass, Annex B)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 2(Relative density, 20/20oC, Annex C)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 3(Colour (Pt-Co-Scale ), IS 3025 part-4)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 4(Boiling range, IS 5298)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 5(Residue, on evaporation, mg/l, Annex D)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 6(Ash content, g/100 ml, Annex E)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 7(Iron ( as Fe ), ppm, IS 3025 part 53)	-	0	-
4.3 & 7.1 - Table -1, Sl no. 8(Copper ( as Cu ), ppm, IS 3025 (Part 42))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 9(Nickel ( as Ni ), ppm, IS 3025 (Part 54))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 10(Silica ( as SiO2 ), ppm, IS 3025 (Part 35))	-	0	-
4.3 & 7.1 - Table -1, Sl no. 11(Chloride ( as Cl), ppm, IS 3025 (Part 32))	-	0	-

08 May, 2028

-
Included w.e.f 28.07.2025

848

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR,BWR,BWP

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	1500	-
4 Table (i)(BWR (Boiling Water Resistant))	-	1500	-
4 Table (i)(MR (Moisture Ressistant))	-	1000	-
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	1000	-
7.4(Acidity and Alkalinity ( pH))	-	2000	-

23 May, 2028

-
Included w.e.f 24.06.2025

849

MSME Testing Centre, New Delhi

8101204

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

15600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Construction)	-	300	-
4.1.2(Construction)	-	300	-
4.1.3(Construction)	-	300	-
4.1.4(Construction)	-	300	-
4.1.5(Construction)	-	300	-
4.1.6(Construction)	-	300	-
4.1.7(Construction)	-	300	-
4.1.8(Construction)	-	300	-
4.1.10(Construction)	-	300	-
4.1.11(Construction)	-	300	-
4.1.12(Construction)	-	300	-
5.1(Materials)	-	300	-
5.2(Materials)	-	2500	-
5.3(Materials)	-	300	-
5.4(Materials)	-	300	-
6.1(Connections)	-	300	-
6.2(Connections)	-	300	-
6.3(Connections)	-	300	-
6.4(Connections)	-	300	-
6.5(Connections)	-	300	-
6.6(Gas Inlet Connections)	-	300	-
7(Flame Visibility)	-	300	-
8(Gas Taps)	-	2400	-
9(Flame Failure Device)	-	300	-
10(Ignition Device)	-	300	-
11(Protection Against Accidental Overheating)	-	1000	-
12(Water Rate Adjuster)	-	300	-
14(Gas Soundness)	-	300	-
15(Water Soundness)	-	300	-
17(Combustion)	-	300	-
18(Gas Consumption)	-	300	-
19.2(Ignition and flame travel)	-	300	-
20(Flame Stability)	-	300	-
21(Noise Control)	-	300	-
22(Flash Back)	-	300	-
23(Resistance to Draught)	-	300	-
24(Fire Hazard And Limiting Temperature )	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
24(Fire Hazard And Limiting Temperature)	-	1000	-
25(Time For Temperature Rise)	-	1000	-
26(Hot Water Output Test)	-	1000	-
27(Marking)	-	300	-
16(Thermal Efficiency)	-	1000	-

31 Dec, 2026

-
-

850

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6908 (1991)

Asbestos - Cement pipes and fitkIngs for sewerage and drainage - Specification (First Revision)

Cement pipes and fittings for sewerage and drainage

20700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Composition)	-	2000	-
3.2(General Appearance and Finish)	-	500	-
3.3(Classification)	-	1000	-
3.4(Dimensions and Geometrical Characteristics)	-	1500	-
3.5.1(Hydraulic Pressure Test ( Optional Test ))	-	3000	-
3.5.2(Transverse Crushing Strength)	-	3000	-
4(Fittings)	-	1500	-
5.2(The composition of asbestos cement coupling)	-	2000	-
5.3(Rubber rings used in jointing)	-	1000	-
5.4(The assembled joint)	-	1000	-
6(Independent Testing)	-	100	-
7.1(Inspection of Each Item of Consignment)	-	100	-
7.2(Inspection by Sampling)	-	100	-
8(Manufacturer,s Certificate)	-	100	-
10(Marking)	-	100	-
3.5.3(Longitudinal Bending Strength)	-	1000	-
4.4.1(Dimension)	-	500	-
4.4.2(Nominal Diameter)	-	500	-
4.4.3(Thickness)	-	500	-
4.4.4(Tolerance)	-	200	-
4.5.1(Hydraulic Pressure Test)	-	3000	-
4.5.2(Transverse Crushing Strength)	-	3000	-

31 Dec, 2026

-
-

851

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14862 (2000)

Fibre cement flat sheets - specification

Fibre cement flat sheets (Type-A ,Type-B)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CLASSIFICATION)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
4.2(CLASSIFICATION -The sheets are further classified into five categories)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.1(Nominal Length )	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.1(Nominal Width)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.2(Thickness)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.4.1(Straightness of edges - Length )	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.4.1(Straightness of edges - Width )	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.1.4.2(Squareness of edges)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.2.1(Bending Strength)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
5.2.2(Apparent Density)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
6.1(For TypeA sheets - Bending Strength)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
6.2(For TypeA sheets - Water Impermeability)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
6.3(For TypeA sheets - Frost Resistance)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
6.4(For TypeA sheets - Warm Water)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000
6.5(For TypeA sheets - Soak-Dry)	-	28000	For other Test Rs 28,000 For optional test extra- Freeze Thaw test-Rs,30000 Warm Water-Rs,10000

31 Dec, 2026

-
-

852

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14871 (2000)

Products in fibre reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding - Specification

fibre reinforced cement - Long corrugated

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1(dimensions)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.2.1, Table-1(Breaking load)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.2.2(Deflection)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.3.1(Impermeability)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.3.2(Frost resistance)	-	30000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.3.3(Apparent density)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000
5.4.3.4(warm water)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Warm Water -Rs,10000

31 Dec, 2026

-
-

853

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	500	-
8.9 table-6(Elongation at Break)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	500	-
8.7(Density)	-	500	-
8.5 (Oxidation Induction Time)	-	500	-
8.4( Melt Flow Rate)	-	500	-
8.2(Longitudinal Reversion Test)	-	500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	500	-
7.4.1.2(Ovality)	-	500	-
7.4 table -3 & 4(6.1 Dimensions)	-	500	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	500	-
6.1.3 (PIPE DESCRIPTION)	-	500	-
6, 6.1.2(PIPE DESCRIPTION)	-	500	-
6, 6.1.1(PIPE DESCRIPTION)	-	500	-
6, 6.1(PIPE DESCRIPTION)	-	500	-
8.6(Overall migration)	-	500	-
8.3(Carbon black)	-	500	-
5.4(Anti oxydent)	-	500	-
5.3(e)(Carbon Black Master Batch)	-	500	-
5.3(d)(Carbon Black Master Batch)	-	500	-
5.3(c)(Carbon Black Master Batch)	-	500	-
5.3(b)(Carbon Black Master Batch)	-	500	-
5.3 (a)(Carbon Black Master Batch)	-	500	-
5.2(Polyethylene Resin)	-	500	-
5, 5.1 table-1(MATERIALS)	-	500	-
7()	-	500	-
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	500	-
5.2(Volatile matter Content)	-	500	-
5.3(Toluene Extract)	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	500	-
8.7(Density-IS 7328:2020)	-	500	-
8.7(Corrected Density- IS 7328:2020)	-	500	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	500	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
8.10(Slow Crack Growth Rate)	-	500	-
7()	-	500	-
5.2(Density)	-	500	-
5.2(MFI @ 1900C/5.0 Kg)	-	500	-
5.2(Volatile matter Content)	-	500	-
5.3(Toluene Extract)	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Clause 7.3(Coiling)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
7.1(Visual Appearance)	-	500	-
7.3(Coiling)	-	500	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	500	-
8.7(Density-IS 7328:2020)	-	500	-
8.7(Corrected Density- IS 7328:2020)	-	500	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	500	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-

08 May, 2028

-
Included w.e.f 28.07.2025

854

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1364 : Part 4 (2003)

Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision)

all

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	24000	-
4, table 3(General requirements)	-	24000	-
4, table 3(Thread)	-	24000	-
4, table 3(Mechanical properties)	-	24000	-
4, table 3(Tolerances)	-	24000	-
4, table 3(Finish-coating)	-	24000	-
4, table 3(Surface integrity)	-	24000	-
4, table 3(Acceptability)	-	24000	-
5(Designation)	-	24000	-
3(Dimensions)	-	24000	-
4, table 3(General requirements)	-	24000	-
4, table 3(Thread)	-	24000	-
4, table 3(Mechanical properties)	-	24000	-
4, table 3(Tolerances)	-	24000	-
4, table 3(Finish-coating)	-	24000	-
4, table 3(Surface integrity)	-	24000	-
4, table 3(Acceptability)	-	24000	-
5(Designation)	-	24000	-

31 Dec, 2026

-
Included w.e.f 23.07.2025

855

Sleen India Biz venture Private Limited, Agra

9139736

IS 8637 (2020)

H Acid ? Specification ( Second Revision )

Industrial Chemical-H Acid

25500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	4000	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	3000	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	4000	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	5000	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	5000	-
3.2-Table 1-(vi)(Koch’s acid content)	-	3500	-
4.1(Packing )	-	250	-
4.2(Marking)	-	250	-
3.1(Description)	-	0	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	0	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	0	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	0	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	0	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	0	-
3.2-Table 1-(vi)(Koch’s acid content)	-	0	-
4.1(Packing )	-	0	-
4.2(Marking)	-	0	-
3.1(Description)	-	0	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	0	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	0	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	0	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	0	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	0	-
3.2-Table 1-(vi)(Koch’s acid content)	-	0	-
4.1(Packing )	-	0	-
4.2(Marking)	-	0	-

15 May, 2027

-
Included w.e.f.18.06.2025

856

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

All

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	16000	-
Cl-5(General Conditions for the tests)	-	16000	-
Cl-6(Classification)	-	16000	-
Cl-7(Marking)	-	16000	-
Cl-8(Safety Requirements)	-	16000	-
Cl-9(Endurance fpr motor and base assembly)	-	16000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	16000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	16000	-
Cl-10.4(Idli Batter)	-	16000	-
Cl-10.5(Operational Tests for Juicers)	-	16000	-
Cl-11(Temperature Withstand Test for Bowl)	-	16000	-
Cl-12.1(Test for Switches)	-	16000	-
Cl-13(Strength of Assembly)	-	16000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	16000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	16000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	16000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	16000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	16000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	16000	-
Cl-19.11.4.1(Electrostatic discharges)	-	16000	-
Cl-19.11.4.2(Radiated fields)	-	16000	-
Cl-19.11.4.3(Fast transient bursts)	-	16000	-
Cl-19.11.4.4(Surge immunity test)	-	16000	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	16000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	16000	-
Cl-19.11.4.7(Harmonics)	-	16000	-
Cl-4(General Requirements)	-	16000	-
Cl-5(General Conditions for the tests)	-	16000	-
Cl-6(Classification)	-	16000	-
Cl-7(Marking)	-	16000	-
Cl-8(Safety Requirements)	-	16000	-
Cl-9(Endurance fpr motor and base assembly)	-	16000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	16000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	16000	-
Cl-10.4(Idli Batter)	-	16000	-
Cl-10.5(Operational Tests for Juicers)	-	16000	-
Cl-11(Temperature Withstand Test for Bowl)	-	16000	-
Cl-12.1(Test for Switches)	-	16000	-
Cl-13(Strength of Assembly)	-	16000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	16000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	16000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	16000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	16000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	16000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	16000	-
Cl-19.11.4.1(Electrostatic discharges)	-	16000	-
Cl-19.11.4.2(Radiated fields)	-	16000	-
Cl-19.11.4.3(Fast transient bursts)	-	16000	-
Cl-19.11.4.4(Surge immunity test)	-	16000	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	16000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	16000	-
Cl-19.11.4.7(Harmonics)	-	16000	-

13 May, 2028

-
Included w.e.f 02.07.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

857

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

LD-2.5,MD-10,HD-20,EHD-35/Rect., Circular, Square/All Size

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grade)	-	500	-
3(Type/Shape of Cover)	-	500	-
4.4(Reinforcement)	-	0	-
4.4(Reinforcement)	-	0	-
4.5(Steel Fibres - Diameter / equivalent diameterofsteel tibres)	-	0	-
4.5(Steel Fibres - The aspect ratio of the tibres)	-	0	-
5.2 and Table 1(Dimensions of Frame - A)	-	500	-
5.2 and Table 1(Dimensions of Frame - B)	-	500	-
5.2 and Table 1(Dimensions of Frame - C)	-	500	-
5.2 and Table 1(Dimensions of Frame - D)	-	500	-
5.2 and Table 1(Dimensions of Frame - E)	-	500	-
5.2 and Table 1(Dimensions of Frame - F)	-	500	-
5.2(Dimensions of cover- Diameter)	-	500	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	500	-
5.2(Top surface ofthe frame and cover is in level)	-	100	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	100	-
5.2 and Fig 1(Clear cover to reinforcement)	-	100	-
5.2 and Fig 1(Distance of housing from the edge)	-	100	-
7.4.1(Edge Protection and Finishing - Frame)	-	100	-
7.4.1(Edge Protection and Finishing - Frame)	-	100	-
7.4.1(Edge Protection and Finishing - Frame)	-	100	-
7.4.1(Edge Protection and Finishing - Frame)	-	100	-
7.4.2(Edge Protection and Finishing - Cover)	-	100	-
7.4.2(Edge Protection and Finishing - Cover)	-	100	-
7.4.2(Edge Protection and Finishing - Cover)	-	100	-
7.4.2(Edge Protection and Finishing - Cover)	-	100	-
8(LIFTING HOOKS)	-	100	-
8(LIFTING HOOKS)	-	100	-
9.1(General)	-	100	-
9.3 and Table and Annex C(Load Test)	-	800	-
Clause No. 5.2, Figure 1(Typical Illustration of circular precast concrete manhole cover)	-	200	-
Clause No. 9.3 Annex C(Adhesion between concrete and reinforcing steel)	-	0	-
Clause No. 9.3 Annex C(Cracks at bottom side of the cover )	-	200	-
Clause No. 9.3 Annex C(Permanent set of cover)	-	300	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(2/3rd of Test Load)	-	500	-
Clause No. 9.3, 12.3 & C-1.1, Table No. 2(Test Load)	-	200	-
Clause No. 8(Lifting Device)	-	200	-
Clause No. 8(Lifting Hooks (Diameter of MS rod))	-	200	-
Clause No. 7.4.4(Compatitbilty of Seating of cover and frame)	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Thikness of MS sheet))	-	200	-
Clause No. 7.4.2(Edge protection and finishing of cover (Cover finish of top surface))	-	300	-
Clause No. 7.4.1(Edge protection and finishing of frame (Steel connectors))	-	300	-
Clause No. 7.4.1(Edge protection and finishing of frame (Size of mild steel flat))	-	300	-
Clause No. 6(Design)	-	100	-

23 May, 2028

-
Included w.e.f.27.06.2025

858

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1364 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 2 Hexagon Head Screws ( Size Range M 1.6 to M 64 ) ( Fifth Revision )

all

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3(Dimension)	-	24000	-
Cl. 4 and Table 3(Threads and tolerances)	-	24000	-
Cl. 4 and Table 3(Mechanical Properties)	-	24000	-
Cl. 4 and Table 3(Finish – Coating)	-	24000	-
Cl. 4 and Table 3(Surface integrity)	-	24000	-
Cl. 3(Dimension)	-	24000	-
Cl. 4 and Table 3(Threads and tolerances)	-	24000	-
Cl. 4 and Table 3(Mechanical Properties)	-	24000	-
Cl. 4 and Table 3(Finish – Coating)	-	24000	-
Cl. 4 and Table 3(Surface integrity)	-	24000	-

31 Dec, 2026

-
Included w.e.f 23.07.2025

859

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

ALL

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	500	-
5(CLASSIFICATION OF PIPES)	-	500	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	1000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1000	-
11.2(Resistance to External Blows at 0°C)	-	1000	-
10.3(Effect on Water Test)	-	1000	-
6.1.2(PVC Resin)	-	1000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	1000	-
7.1.4(Length)	-	1000	-
6.1.1(VCM Content)	-	1000	-
7.2.1.2b(Maximum inner diameter of groove)	-	1000	-
13.1(Marking)	-	0	-
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	500	-
10.7(Sulphated Ash Content)	-	500	-
5(CLASSIFICATION OF PIPES)	-	500	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	500	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	500	-
11.2(Resistance to External Blows at 0°C)	-	500	-
10.3(Effect on Water Test)	-	500	-
6.1.2(PVC Resin)	-	500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	500	-
6.1.1(VCM Content)	-	500	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	500	-
cL-13.1.1(Marking)	-	500	-
Cl-13.1.2(Marking)	-	500	-

08 May, 2028

-
Included w.e.f. 26.06.2025

860

BCH Electric Limited, Faridabad

8186026

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

Contactor & Starter

1100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	5000	Only for internal testing
8.1.2.1(General materials requirements)	-	10000	Only for internal testing
8.1.2.2(Glow wire testing)	-	30000	Only for internal testing
8.1.2.3(Test based on flammability category)	-	0	Only for internal testing
8.1.3(Current-carrying parts and their connections)	-	5000	Only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	Only for internal testing
8.1.5.1(Insulation)	-	5000	Only for internal testing
8.1.5.2(Direction of movement)	-	0	Only for internal testing
8.1.5.3(Mounting)	-	5000	Only for internal testing
8.1.5.4(Protection)	-	0	Only for internal testing
8.1.8(Terminals)	-	0	Only for internal testing
8.1.8.1(General)	-	5000	Only for internal testing
8.1.8.2(Terminal identification and marking)	-	10000	Only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	Only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	Only for internal testing
8.1.11(Enclosures for equipment)	-	30000	Only for internal testing
8.1.11.1(Design)	-	5000	Only for internal testing
8.1.11.2(Insulation)	-	5000	Only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	50000	Only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	Only for internal testing
8.1.14(Limited energy source)	-	0	Only for internal testing
8.1.14.1(General)	-	5000	Only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	0	Only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	0	Only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	Only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	Only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	Only for internal testing
8.2(Performance requirements)	-	10000	Only for internal testing
8.2.1(Operating conditions)	-	10000	Only for internal testing
8.2.1.1.1(General conditions)	-	5000	Only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	25000	Only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	Only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	Only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	Only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	20000	Only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	30000	Only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	Only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	20000	Only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	Only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	Only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	Only for internal testing
8.2.2(Temperature-rise)	-	20000	Only for internal testing
8.2.2.3(Accessible parts)	-	20000	Only for internal testing
8.2.2.4(Ambient air temperature)	-	20000	Only for internal testing
8.2.2.5(Main circuit)	-	20000	Only for internal testing
8.2.2.6(Control circuits)	-	20000	Only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	Only for internal testing
8.2.3(Dielectric properties)	-	40000	Only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	10000	Only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	Only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	Only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	15000	Only for internal testing
8.2.4.5(Coil power consumption)	-	20000	Only for internal testing
8.2.4.6(Pole impedance)	-	15000	Only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	0	This test is under Exclusion
8.2.5.1(Performance under short-circuit conditions)	-	0	This test is under Exclusion
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	0	This test is under Exclusion
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	0	This test is under Exclusion
8.3(Electromagnetic compatibility (EMC))	-	0	This test under Exclusion
8.3.3(Emission)	-	0	This test under Exclusion
9.1.5.2(Environment tests)	-	25000	Only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	Only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	Only for internal testing
9.2.4(Limited energy source test)	-	2000	Only for internal testing
9.2.5(Breakdown of components)	-	2000	Only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	Only for internal testing
9.3.3.2(Operating limits)	-	20000	Only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	Only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	Only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	Only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	Only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	Only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	Only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	Only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	Only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	Only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	Only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	Only for internal testing
9.3.3.6(Operational performance capability)	-	50000	Only for internal testing
9.3.4.2.2(prospective current)	-	10000	Only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	10000	Only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	15000	Only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	Only for internal testing
9.3.6.3(Dielectric tests)	-	20000	Only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	This test is under Exclusion
9.4.2(Immunity)	-	5000	This test is under Exclusion
9.4.2.2(Electrostatic discharge)	-	5000	This test is under Exclusion
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	5000	This test is under Exclusion
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	5000	This test is under Exclusion
9.4.2.5(Electrical fast transient/bursts)	-	5000	This test is under Exclusion
9.4.2.6(Surges)	-	10000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	1000	only internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only internal testing00
9.4.2.9(Harmonics in the supply)	-	2000	only internal testing
9.4.3(Emission)	-	2000	only internal testing
F.7.2(Tests on products in a new condition)	-	2000	only internal testing
F.7.3(Test after conventional operational performance)	-	2000	only internal testing
H.3(Limits of operation of control functions)	-	2000	only internal testing
H.4(Test of the control functions)	-	2000	only internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	This test is under Exclusio
M.9.4(Thermal cycling test)	-	5000	only for internal testing
M.9.5(Climatic test)	-	5000	only internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	40000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	40000	only internal testing
M.9.11(Clearance and creepage distances)	-	10000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	this test is under exclusion
8.2.1.5.4.1(Limits of operation of under-current relays)	-	20000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	5000	only for internal testing
8.1.2.2(Glow wire testing)	-	20000	only for internal testing
8.1.2.3(Test based on flammability category)	-	5000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	10000	only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	only for internal testing
8.1.5.1(Insulation)	-	5000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	5000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	20000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	5000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	25000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	5000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	10000	only for internal testing
8.2(Performance requirements)	-	10000	only for internal testing
8.2.1(Operating conditions)	-	15000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	100000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	20000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	20000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	5000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	20000	only for internal testing
8.2.2.4(Ambient air temperature)	-	20000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	20000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	only for internal testing
8.2.3(Dielectric properties)	-	40000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	10000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	5000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	2000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	5000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	2000	only for internal testing
9.1.5.2(Environment tests)	-	2000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	20000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	only for internal testing
9.3.3.6(Operational performance capability)	-	20000	only for internal testing
9.3.4.2.2(prospective current)	-	2000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	15000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.3(Dielectric tests)	-	15000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	2000	only for internal testing
9.4.2.6(Surges)	-	2000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	5000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	25000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	10000	only for internal testing
P.2.3(Verification of operational performance capability)	-	10000	only for internal testing
P.2.4.2(Test voltage)	-	10000	only for internal testing
P.2.4.3(Application of the test voltage)	-	10000	only for internal testing
P.4(Test of MPSD for IT system)	-	1000	only for internal testing
Q.5.3(Selectivity determined by test)	-	1000	only for internal testing
8.3.2(Immunity)	-	10000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	5000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	15000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	2000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	5000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	2000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	2000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	2000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	2000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	2000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	30000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	20000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	5000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	10000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	20000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	5000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	5000	only for internal testing
9.1.5.2(Environment tests)	-	20000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	5000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	20000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	15000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	15000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	15000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	15000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	50000	only for internal testing
9.3.4.2.2(prospective current)	-	10000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	5000	only for internal testing
9.3.6.2(Operation and operating limits)	-	10000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	3000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	3000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	3000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	25000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	20000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	1000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	2000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	25000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	3000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	10000	only for internal testing
8.2.1.1.1(General conditions)	-	2000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	2000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	2000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	2000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	20000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	5000	only for internal testing
8.2.4.5(Coil power consumption)	-	20000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	0	This test is under exclusion
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	0	This test is under exclusion
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	0	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	0	This test is under exclusion
8.3.3(Emission)	-	0	This test is under exclusion
9.1.5.2(Environment tests)	-	10000	This test is under exclusion
9.2.2(Electrical performance of screwless-type clamping units)	-	2000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	2000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	only for internal testing
9.3.3.6(Operational performance capability)	-	15000	only for internal testing
9.3.4.2.2(prospective current)	-	2000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	10000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	10000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	2000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	3000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	3000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	20000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	2000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	15000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	5000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	1000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	5000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	1000	only for internal testing
8.1.5.3(Mounting)	-	1000	only for internal testing
8.1.5.4(Protection)	-	1000	only for internal testing
8.1.8(Terminals)	-	1000	only for internal testing
8.1.8.1(General)	-	1000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	2000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	20000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	2000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	2000	only for internal testing
8.2.1.1.1(General conditions)	-	2000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	5000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	3000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	2000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	5000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	20000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	5000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	15000	only for internal testing
8.2.2.3(Accessible parts)	-	5000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	4000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	4000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	80000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	5000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	5000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	2000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	2000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	2000	only for internal testing
9.1.5.2(Environment tests)	-	10000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	2000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	5000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	40000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	15000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	25000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	15000	only for internal testing
9.3.4.2.2(prospective current)	-	1000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	2000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	50000	only for internal testing
9.3.6.2(Operation and operating limits)	-	40000	only for internal testing
9.3.6.3(Dielectric tests)	-	20000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	5000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	4000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	5000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	2000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	50000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	2000	only for internal testing
P.2.4.2(Test voltage)	-	5000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	5000	only for internal testing
8.1.4(Clearances and creepage distances)	-	2000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	5000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	3000	only for internal testing
8.1.11(Enclosures for equipment)	-	20000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	5000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	5000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	3000	only for internal testing
8.1.15(Stored charge energy circuit)	-	3000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	3000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	10000	only for internal testing
8.2(Performance requirements)	-	10000	only for internal testing
8.2.1(Operating conditions)	-	50000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	3000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	20000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	40000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	4000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	40000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	25000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	20000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	20000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	2000	only for internal testing
8.3.3(Emission)	-	3000	only for internal testing
9.1.5.2(Environment tests)	-	30000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	5000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	40000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	150000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	150000	only for internal testing
9.3.4.2.2(prospective current)	-	10000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	10000	only for internal testing
9.3.6.2(Operation and operating limits)	-	40000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	5000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	5000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	5000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	5000	only for internal testing
H.4(Test of the control functions)	-	5000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	2000	only for internal testing
M.9.7(Critical load current test)	-	5000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	70000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	40000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	5000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing

05 Jun, 2028

-
Included w.e.f 23.06.2025 Restricted only for Sequence I, II, IV & V. Excluding Cl. 8.1.2.3 (Test based on flammability category). Cl. 8.3 (EMC), Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 9.4 (EMC tests), Q.5.3 (Selectivity determined by test)

861

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

COMPLETE

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	3000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	12000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.8(Wrapping Test)	-	5000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
11(Stranding)	-	3000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
8(Freedom from defects)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.11(Stress-strain Test)	-	40000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-

11 Apr, 2028

-
Included w.e.f 02.07.2025

862

Rajkot Metlab Services LLP, Rajkot

7183706

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	1500	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	1000	-
11(Transverse Tension Test,%)	-	1000	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	500	-
13 (Table No.- 7)(Flaring Test)	-	1000	-
14(Flattaning Test-IS 2328)	-	1000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	-
17(Leak Tighteness Test)	-	1500	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	2500	-
19(Eddy current test & Air under water)	-	1500	-
21(Workmanship, Finish and Appearance)	-	100	-
22(Repair by Welding or Grinding)	-	100	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	100	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	500	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	1500	-
Clause 10.1 - Table 4(Tensile Strength)	-	1500	-
Clause 10.1 - Table 4(Percent Elongation)	-	1500	-
Clause 11(Transverse Tension Test)	-	1500	-
Clause 12(Hardness Test)	-	1000	-
Clause 13(Flaring Test)	-	1000	-
Clause 14(Flattening Test)	-	1000	-
Clause 15(Grain Size)	-	1500	-
Clause 17(Leak Tightness Test)	-	1500	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	2500	-
Clause 21(Workmanship, Finish & Appearance)	-	100	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	100	-
10.2(Hardness test IS 1500 (part-1):2019)	-	500	-
12.2(Flaring test IS 17878:2022)	-	1000	-
16(Sampling)	-	100	-
24(Marking)	-	100	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	500	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	500	-

12 Jan, 2028

-
Included w.e.f.28.07.2025 Exclusion Excluding Eddy Current and Air Under Water

863

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC Insulated Unsheathed and Sheathed Cables/Cords with rigid and flexible conductor for rated voltages up to and including 1100 V

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.2(Legibility)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11.1(Durability)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(Identification)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.4(Flammability test- Unaffected portion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.4(Flammability test-Burning after flame removal)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
table 1 e) 3) (IR constant- max. Temp)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
table 1 e) 3) (IR constant- Room temp )	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
table 1 e) 3) (Volume Resistivity - Room temp )	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.2(HV (room temperature))	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1(HV (water immersion))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1(HV (water immersion))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.8(Smoke density rating)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.6(Halogen evolution)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.7(Temperature index)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.5(Oxygen index)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 9)(Cold impact for sheath)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 8)(Cold bend for sheath)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 9)(Cold impact for insulation)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 8)(Cold bend for insulation)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1(Category Code)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 4)(Cracks Observed)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 4)(Cracks Observed)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 3)(Elongation variation)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 3)(TS variation)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 3)(Elongation (After ageing))	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	12000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Thickness of Sheath)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Application )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.3(Thickness of Insulation)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Ovality)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Overall dimensions)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.11(Per sulphate test (for tinned Cu cable only))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Conductor resistance test)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Wrapping test (for Al))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Tensile test (for Al)- After Stranding)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Tensile test (for Al)-Before Stranding)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Annealing test (for copper))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.16.1) (Cl.19.1)(Conductor)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.16.1) (Cl.19.1)(Conductor)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.16.1) (Cl.19.1)(Conductor)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12(CONSTRUCTION Core Identification)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Sheath Material )	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(Binder Tape)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(Filler)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Filler)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Insulation)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Joints in Conductor)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Joints in Conductor)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Conductor - Material)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Conductor - Material)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.11(Persulphate Test )	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.0(Core identification)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4, IS 8130(Construction of conductor)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 2, IS 8130(No fo wire in a conductor)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Minimum thickness of Sheath)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.3(Avarage thickness of Sheath)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.3(Minimum thickness of insulation)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.3(Avarage thickness of insulation)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Table 4(Copper purity test)	-	4000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
table 1, 4.2(insulation resistance test)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.4(Mechanical properties before and after ageing)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Material)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Electrical Resistance)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5(INSULATION)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6(FILLER)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(BINDER TAPE)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8(SHEATH)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(OVERALL DIMENSIONS)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1(High Voltage Test (Water Immersion Test))	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.2(High Voltage Test (at Room Temperature))	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.4(Flammability Test)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.5(Oxygen Index Test)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.6(Test for Halogen Acid Gas Evolution)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.7(Test for Temperature Index)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.8(Smoke Density Rating)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.1(Flex Test)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10.11(Persulphate Test)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(IDENTIFICATION)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12(CORE IDENTIFICATION)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13(CABLE CODE)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
15(PACKING AND MARKING)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
16.1(Construction)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
16.2(Tests)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	350	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(4.3 of IS 8130:2013)(Form of Conductor)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	220	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	330	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl.19.1.4(Assembly of Cores)	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 8.2(Application of Sheath)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

10 Jul, 2027

-
Included w.e.f.20.06.2025 Exclusion 10.3(Spark Test)

864

ATCC TEST LABS LLP

8172626

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	1000	-
6(Standard ratings)	-	1000	-
7(Classification)	-	500	-
8(Marking)	-	500	-
9(Dimensions)	-	1000	-
10(Protection against electric shock)	-	1000	-
11(Terminals)	-	1000	-
12(Provision for earthing)	-	1000	-
13(Construction)	-	1000	-
14(Switched lampholders)	-	1000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	1000	-
16(Mechanical strength)	-	1000	-
17(Screws, current-carrying parts and connections)	-	1000	-
18(Creepage distances and clearances)	-	1000	-
19(General resistance to heat)	-	1000	-
20(Resistance to heat, fire and tracking)	-	1000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	1000	-
Annex A(Season cracking/corrosion test)	-	500	-
12.4(Thermal tests)	-	500	-
9.1(Lampholder dimensions)	-	500	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	500	-
13.1(Construction)	-	500	-
13.8(Construction)	-	1000	-
14.4(Switched lampholders)	-	500	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	500	-
16.7(Mechanical strength)	-	300	-
16.8(Mechanical strength)	-	200	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	500	-

15 Jun, 2026

-
Included w.e.f 04.07.2025

865

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 15652 (2006)

Insulating mats for electrical purposes - Specification

Class A,B,C,D

25350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	100	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	100	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	100	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	100	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	100	-
9(Marking (As per Cl.9.2 of IS 15652 : 2006))	-	100	-
10.a)(Packing)	-	50	-
10.b)(Packing)	-	50	-
10.c)(Packing)	-	50	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	100	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	100	-
5(Composition (As per Cl. 5.1 of IS 15652 : 2006))	-	100	-
5(Composition (As per Cl. 5.2 of IS 15652 : 2006))	-	100	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	200	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	200	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	200	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	200	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	200	-
6(Colour (As per Cl. 6.4 of IS 15652 : 2006))	-	100	-
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	100	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	500	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	500	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	750	-
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	1000	-
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	750	-
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	1000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	1000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	1000	-
8(Di-electric Properties (Cl.8.2), A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	1000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	2000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	2000	-
8(Thermal Properties (Cl..8.4))	-	1000	-
8(Thermal Properties (Cl..8.4))	-	1000	-
8(Extreme Low Temperature (Cl.8.6))	-	2000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	0	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	0	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	0	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	0	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	0	-
9(Marking (As per Cl.9.2 of IS 15652 : 2006))	-	0	-
10(Packing)	-	0	-
10(Packing)	-	0	-
10(Packing)	-	0	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	0	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	0	-
5(Composition (As per Cl. 5.1 of IS 15652 : 2006))	-	0	-
5(Composition (As per Cl. 5.2 of IS 15652 : 2006))	-	0	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	0	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	0	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	0	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	0	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	0	-
6(Colour (As per Cl. 6.4 of IS 15652 : 2006))	-	0	-
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	0	-
8(Di-electric Properties (Cl.8.2), A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	0	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	0	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	0	-
8(Thermal Properties (Cl..8.4))	-	0	-
8(Thermal Properties (Cl..8.4))	-	0	-
8(Extreme Low Temperature (Cl.8.6))	-	0	-

11 Apr, 2028

view Scope file
Included w.e.f.16.07.2025

866

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

245000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	245000	5% Discount for BIS
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	245000	5% Discount for BIS
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	245000	5% Discount for BIS
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	245000	5% Discount for BIS
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	245000	5% Discount for BIS
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	245000	5% Discount for BIS
14(Ice-Making Test (If Applicable))	-	245000	5% Discount for BIS
15(Test For Absence Of Odour And Taste)	-	245000	5% Discount for BIS
16(Safety Requirements)	-	245000	5% Discount for BIS

08 May, 2028

-
Included w.e.f.06.08.2025

867

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Freedom from defects)	-	10000	-
7.0(Dimension and Tolerances)	-	10000	-
8.1 Table-1(Al)	-	10000	-
8.1 Table-1(Cu)	-	10000	-
8.1 Table-1(Mg)	-	10000	-
8.1 Table-1(Si)	-	10000	-
8.1 Table-1(Fe)	-	10000	-
8.1 Table-1(Mn)	-	10000	-
8.1 Table-1(Zn)	-	10000	-
8.1 Table-1(Ti)	-	10000	-
8.1 Table-1(Cr)	-	10000	-
9.1(Tensile Strength)	-	10000	-
9.3(Wrapping Test)	-	10000	-
10(Selection of Test Samples)	-	10000	-

13 May, 2028

-
Included w.e.f 10.06.2025

868

IEC TEST LABS LLP

8165726

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1020000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	5000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	10000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	3000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	100000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
11.2.2(Spark Test)	-	10000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	100000	-
11.2.5(Surface Resistance of Sheath)	-	10000	-
11.3.1(Sheath Colour)	-	2000	-
11.3.2(Sheath Marking)	-	2000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	10000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	700000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	50000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	50000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	2000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	2000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	10000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	10000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	20000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	20000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	20000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	20000	-
Annex - B of IS 17293:2020(Compatibility test)	-	20000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	30000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	20000	-
11.2.5(Surface Resistance of Sheath)	-	20000	-
11.3.1(Sheath Colour)	-	1000	-
11.3.2(Sheath Marking)	-	1000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	20000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	20000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	20000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	500000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	10000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	10000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	1000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	30000	-

07 Sep, 2026

-
Included w.e.f.29.07.2025

869

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

PVC Geomembrane

175080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	500	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1000	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	-
5,Table 1(Tear resistance (machine direction))	-	2000	-
5,Table 1(Tear resistance (Cross direction))	-	2000	-
5,Table 1(Index puncture resistance,N)	-	2700	-
5,Table 1(Low temperature crack resistance)	-	2000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	0	Test not available
5,Table 1(Seam strength,kg,Min)	-	2000	-
5,Table 1(Volatile Loss ,% ,Max)	-	760	-
5,Table 1(Peel strength,kN/m,Min)	-	1500	-
5,Table 1(Resistance to soil burial)	-	25000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	-
5,Table 1(Tensile strength (Transverse),% change)	-	1500	-
5,Table 1(Water extraction,% loss in weight)	-	1000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	104000	-
5, Table-2(Behaviour during perforation)	-	2700	-
5, Table-2(Dimensional Stability at 80 degree C)	-	2000	-
5, Table-2(Change in length after heating)	-	2000	-
5, Table-2(Resistance to acid and alkali)	-	10500	-
5, Table-2(Resistance to static puncturing)	-	2700	-
5, Table-2(Horizontal rate of burning)	-	1410	-
5, Table-2(Vertical rate of burning)	-	1810	-
4.0(Types)	-	0	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0	Already Given
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0	Already Given
5,Table 1(Elongation at break (Longitudinal),% change)	-	0	Already Given
5,Table 1(Elongation at break (Transverse),% change)	-	0	Already Given
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0	Already Given
6.0(Dimensions and tolerances)	-	0	Already Given
5, Table-2(Length)	-	0	Already Given
5, Table-2(Width)	-	0	Already Given
5, Table-2(Thickness at 20kPa pressure)	-	0	Already Given
5, Table-2(Tensile Strength (Longitudinal))	-	0	Already Given
5, Table-2(Tensile Strength (Transverse))	-	0	Already Given
5, Table-2(Elongation at break (Longitudinal))	-	0	Already Given
5, Table-2(Elongation at break (Transverse))	-	0	Already Given
5, Table-2(Tear Strength (Machine direction))	-	0	Already Given
5, Table-2(Tear Strength (Cross direction))	-	0	Already Given
5, Table-2(Height of fall without perforation)	-	0	Test not available
5, Table-2(Cold crack resistance at low temperature)	-	0	Already Given
5, Table-2(Hydrostatic Pressure Resistance)	-	0	Test not available
5, Table-2(Change in width after heating)	-	0	Already Given
5, Table-2(Strength of welded seam shear resistance)	-	0	Already Given
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	0	Already Given
7.2(Colour ,Surface characteristics and fredom from defects)	-	0	Already Given
5,Table 2(Specific Gravity)	-	0	Already Given
5,Table 1(Specific Gravity)	-	0	Already Given
5,Table 2(Specific Gravity)	-	0	Already Given

-
Included w.e.f.28.07.2025

870

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

from 66 kV to 220 kV

446500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	12500	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	10000	-
19.1 b) IV)(Hot set test)	-	6500	-
19.1 b) V)(Shrinkage test)	-	3500	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3500	-
20.6(Tests for armouring material : Dimensions)	-	3500	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5500	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2500	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3500	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	32000	10% Discount to BIS
20.9.1(Thermal ageing on complete cable sample)	-	12500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	7500	-
20.11.1(Bending test followed by P D test)	-	60000	10% Discount to BIS
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	18500	10% Discount to BIS
20.13(Dielectric power factor measurement at elevated temperature)	-	18500	-
20.14.1(Load cycle test followed by P.D measurement)	-	75000	10% Discount to BIS
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	65000	10% Discount to BIS
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	4000	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	4000	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	4000	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3000	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	25000	10% Discount to BIS
20.18(Measurement of Capacitance)	-	25000	10% Discount to BIS
4.1(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
6(SCREENING)	-	0	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	0	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	0	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	0	-
8.1(INNER SHEATH)	-	0	-
8.2(INNER SHEATH)	-	0	-
8.3(INNER SHEATH)	-	0	-
9.1(ARMOUR)	-	0	-
9.2(ARMOUR)	-	0	-
10.1(OUTER SHEATH)	-	0	-
10.2(OUTER SHEATH)	-	0	-
11.1(CONDUCTOR)	-	0	-
11.2(CONDUCTOR)	-	0	-
12.1(CONDUCTOR SCREENING )	-	0	-
12.2(CONDUCTOR SCREENING )	-	0	-
13.1(INSULATION)	-	0	-
13.2(INSULATION)	-	0	-
14.1(INSULATION SCREENING)	-	0	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	0	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	0	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	0	-
15.1(MOISTURE BARRIER)	-	0	-
15.2.1(Metallic Sheath)	-	0	-
15.2.2(Metallic Sheath)	-	0	-
16.1(INNER SHEATH)	-	0	-
16.2(INNER SHEATH)	-	0	-
17.1(ARMOUR)	-	0	-
17.2(ARMOUR)	-	0	-
17.3(ARMOUR)	-	0	-
17.4(ARMOUR)	-	0	-
17.5(ARMOUR)	-	0	-
18.1(OUTER SHEATH)	-	0	-
18.2(outer sheath colour)	-	0	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	0	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	0	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	0	-
19.1 A) II)(Tests on conductor : Resistance test)	-	0	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	0	-
19.1 b) II)(Tensile strength and elongation at break)	-	0	-
19.1 b) III)(Thermal ageing in air oven)	-	0	-
19.1 b) IV)(Hot set test)	-	0	-
19.1 b) V)(Shrinkage test)	-	0	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	0	-
20.4(Test for concentric copper tape)	-	0	-
20.5(Thickness of metallic sheath)	-	0	-
20.6(Tests for armouring material : Dimensions)	-	0	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	0	-
Table 9, (Measurement of thickness)	-	0	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	0	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	0	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	0	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	0	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	0	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	0	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	0	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	0	-
20.8.3(Water tightness test)	-	0	-
20.9.1(Thermal ageing on complete cable sample)	-	0	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	0	-
20.2(Resistivity test for semi-conducting layer)	-	0	-
20.11.1(Bending test followed by P D test)	-	0	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	0	-
20.13(Dielectric power factor measurement at elevated temperature)	-	0	-
20.14.1(Load cycle test followed by P.D measurement)	-	0	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	0	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	0	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	0	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	0	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	0	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	0	-
20.18(Measurement of Capacitance)	-	0	-

11 Apr, 2028

view Scope file
Included w.e.f.16.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number