BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11238 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

901

IDMA LABORATORIES LIMITED

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	2000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	5000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	5000	-
3.1(Packing)	-	0	NA
3.2(Marking)	-	0	NA

Complete

31 Dec, 2026

-
Included w.e.f 20.03.2025

902

UL INDIA PRIVATE LIMITED

IS 12640 : Part 1 (2016)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)

RCCB

1545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.1(General)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.2(Mechanism)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.3(Indelibility of marking)	-	1000	For DP = 1000, FP = 1000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 (Creepage distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 i)(Clearance )	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.15(Trip-free mechanism)	-	3500	For DP = 2500, FP = 3500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	For DP = 3000, FP = 5000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.5(Test of reliability of terminals for external conductors)	-	5500	For DP = 3500, FP = 5500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.6(Protection against electric shock)	-	4000	For DP = 2000, FP = 4000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.13(Test of resistance to heat)	-	2500	For DP = 2000, FP = 2500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	For DP = 15000, FP = 15000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.2 (Insulation resistance of main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.1(Rated impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.8(Test of Temperature rise)	-	18000	For DP = 15000, FP = 18000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.2(Testing with temperature of 40)	-	38000	For DP = 30000, FP = 38000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.23(Verification of ageing of electronic components )	-	25500	For DP = 23000, FP = 25500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	For DP = 49000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.12.1(Verification of resistance to mechanical shock)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.1(Climatic test)	-	90000	For DP = 90000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.25(Resistance to rusting)	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.14(Resistance to abnormal heat and to fire)	-	20000	For DP = 15000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	For DP = 10000, FP = 12000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.3(Dielectric strength of the main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.5(Secondary circuit of detection transformers)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.10(Mechanical and electrical endurance)	-	120000	For DP = 80000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.9(Residual operating characteristics)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.17(Behaviour in the case of failure of the line voltage)	-	8000	For DP = 6000, FP = 8000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.21(DC components)	-	11000	For DP = 8000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	For DP = 60000, FP = 80000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.4 c)(Coordination at IΔc)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.2(Performance at Im)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	For DP = 60000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	For DP = 120000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	For DP = 90000, FP = 135000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	For DP = 20000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
6(Marking)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.1(General)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.2(Mechanism)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.3(Indelibility of marking)	-	1000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.3 (Creepage distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
8.1.3 i)(Clearance )	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.15(Trip-free mechanism)	-	3500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2500 FP-3500
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of terminals for external conductors)	-	5500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	4000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-4000
9.13(Test of resistance to heat)	-	2500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-2500
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.2 (Insulation resistance of main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(Rated impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-11000 FP-13500
9.8(Test of Temperature rise)	-	18000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Testing with temperature of 40)	-	38000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-30000 FP-38000
9.23(Verification of ageing of electronic components )	-	25500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-23000 FP-25500
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-49000 FP-60000
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.12.1(Verification of resistance to mechanical shock)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-60000 FP-75000
9.22.1(Climatic test)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.14(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.3(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.10(Mechanical and electrical endurance)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.9(Residual operating characteristics)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.17(Behaviour in the case of failure of the line voltage)	-	8000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.21(DC components)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.4 c)(Coordination at IΔc)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.11.2.2(Performance at Im)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)

Complete

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

903

UL INDIA PRIVATE LIMITED

IS 12640 : Part 2 (2016)

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

RCBO

1775000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3(Clearances and creepage distances (internal parts))	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-15000
9.7.2(Insulation resistance of main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.3 a)(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.6(Capability of control circuits connected to the main circuit in respect of withstanding high d.c. voltages due to insulation measurements )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.8(Test of temperature-rise )	-	18000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Test with temperature of 40 ºC)	-	38000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-30000 FP-38000
9.12.11.2(PERFORMANCE AT REDUCED SHORT-CIRCUIT CURRENTS)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-70000 FP-90000
9.12.12.1(VERIFICATION OF THE RCBO AFTER SHORT-CIRCUIT TEST : DIELECTRIC STRENGTH TEST)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.9.1.2(Verification of the operating characteristic under residual current conditions)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.16(Verification of the operation of the test device at the limits of rated voltage )	-	4000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-4000
9.13.1(Verification of resistance to mechanical shock )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-9000 FP-11000
9.12.11.3(SHORT-CIRCUIT PERFORMANCE AT 1500 A)	-	139000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-101000 FP-139000
9.12.11.4(TEST AT SERVICE SHORT-CIRCUIT CAPACITY (Ics)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.22.1(Reliability (Climatic test))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-90000
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test))	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
6, 9.3(Indelibility of marking)	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#6 - DP=500, FP=500 Cl.#9.3, DP=1000, FP=1000
8.1.2 , 9.11(Trip-free mechanism)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#8.1.2 - DP=800, FP=1500 Cl.#9.3, DP=2100, FP=3500
9.4(Reliability of screws, current-carrying parts and connections)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of screw-type terminals for external)	-	5500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	3200	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3200
9.14(Resistance to heat)	-	2500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1800 FP-2500
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3000
9.15(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-20000
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	12000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-12000
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.7.7.3(Verification of leakage currents across open contacts)	-	2000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-2000
9.23(Ageing of electronic components)	-	25500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-23000 FP-25500
9.10(Mechanical and electrical endurance)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-50000 FP- 70000
9.17(Behaviour in case of failure of the line voltage)	-	8000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-6000 FP-8000
9.19(Behaviour in case of surge currents)	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
9.21(DC components)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-8000 FP-11000
9.12.13(Performance at IΔm)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-57000 FP-70000
9.9.2(Overcurrent operating characteristics)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-40000 FP-70000
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP- 60000
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-120000 FP-120000
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-135000
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-20000 FP- 20000
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP- 500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP- 800
9.12.11.2.2(Short circuit test for verifying suitability of RCBOs for use in IT-systems)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP)
6, 9.3(Indelibility of marking)	-	0	-
8.1.2 , 9.11(Trip-free mechanism)	-	0	-
9.4(Reliability of screws, current-carrying parts and connections)	-	0	-
9.5(Test of reliability of screw-type terminals for external)	-	0	-
9.6(Protection against electric shock)	-	0	-
9.14(Resistance to heat)	-	0	-
9.25(Resistance to rusting)	-	0	-
9.15(Resistance to abnormal heat and to fire)	-	0	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	0	-
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	0	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	0	-
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	0	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	0	-
9.7.5(Secondary circuit of detection transformers)	-	0	-
9.7.7.3(Verification of leakage currents across open contacts)	-	0	-
9.23(Ageing of electronic components)	-	0	-
9.10(Mechanical and electrical endurance)	-	0	-
9.17(Behaviour in case of failure of the line voltage)	-	0	-
9.19(Behaviour in case of surge currents)	-	0	-
9.21(DC components)	-	0	-
9.12.13(Performance at IΔm)	-	0	-
9.9.2(Overcurrent operating characteristics)	-	0	-
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	0	-
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	0	-
9.24 Annex-A, Test Sequence-H(Surges)	-	0	-
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	0	-
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	0	-
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	0	-
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	0	-
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	0	-
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP-500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP-800

Complete

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

904

IDMA LABORATORIES LIMITED

IS 8637 (2020)

H Acid ? Specification ( Second Revision )

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	2500	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	2500	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	1500	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	4000	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	3000	-
3.2-Table 1-(vi)(Koch’s acid content)	-	3000	-
4.1(Packing )	-	0	NA
4.2(Marking)	-	0	NA

Complete

31 Dec, 2026

-
Included w.e.f 20.03.2025

905

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY, HEHAL, RANCHI, JHARKHAND

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Category - A & B

3825.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	+ GST as applicable Total Test Charges = Rs. 5100/- (25 % Discount on Test Charges for BIS)
7.2(Flow path in emitters)	-	500	+ GST as applicable
7.3.1(Resistance to Hydrostatic pressure)	-	1000	+ GST as applicable
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	500	+ GST as applicable
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	+ GST as applicable
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	+ GST as applicable
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	600	+ GST as applicable
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-
7.1(Construction and workmanship)	-	0	-
7.2(Flow path in emitters)	-	0	-
7.3.1(Resistance to Hydrostatic pressure)	-	0	-
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	0	-
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	0	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	0	-
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-

Complete

10 Aug, 2023

09 Aug, 2026

-
Included.w.e.f.30.01.2025

906

Alpha Test House Services LLP

IS 2095 : Part 3 (2022)

Gypsum Plaster Boards - Specification Part 3 Reinforced Gypsum Plaster Boards Tiles Cornices and Mouldings Third Revision of IS 2095 Part 3

Reinforced Gypsum Plaster Boards .

44300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Clause 4.1)("CaS04 . 2H2 O, Min")	-	44300	-
Clause 4.1 (ii))(Free water, percent)	-	44300	-
Clause 4.1 ( iii)(" pH a) Natural (mineral) gypsum b) By-product gypsum")	-	44300	-
Clause 4.1 ( iv)("SiO2 , Max")	-	44300	-
Clause 4.1 ( v)(Chloride content, Max)	-	44300	-
Clause 6.1.1("Dimensions of Gypsum Plaster Thickness, Length, Width (mm) ")	-	44300	-
Clause 6.1.2.1(Tolerance on straightness of edge)	-	44300	-
Clause 6.1.2.2(Tolerance on squarencess of edge)	-	44300	-
Clause 6.3(Density kg/m3)	-	44300	-
Clause 6.4.1(Fibre Reinforced Gypsum Plaster Board)	-	44300	-
Clause 6.4.2(Glass Reinforced Gypsum (GRG) Plaster Board)	-	44300	-
Clause 6.5(Impact Strength N-mm/mm2)	-	44300	-
Clause 6.6(Water Absorption)	-	44300	-
Clause 6.7(Jolting Test)	-	44300	-
Clause 9(MARKING)	-	44300	-

Complete

31 Dec, 2026

-
-

907

Alpha Test House Services LLP

IS 14871 (2000)

Products in fibre reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding - Specification

fibre reinforced cement - Long corrugated

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1(dimensions)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.2.1, Table-1(Breaking load)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.2.2(Deflection)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.3.1(Impermeability)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.3.2(Frost resistance)	-	30000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.3.3(Apparent density)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.3.4(warm water)	-	25000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000
5.4.3.5(heat rain)	-	15000	For other test -Rs,25000 For Option test extra:- Frost Resistance -Rs,30000 Heat Rain -Rs, 15000 Warm Water -Rs,10000

Complete

31 Dec, 2026

-
-

908

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

25750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	250	Including GST 18%
4.1.2(Sack Width)	-	250	Including GST 18%
4.1.3(Top Closure Width and Bottom Closure Width)	-	250	Including GST 18%
4.1.4(Patch Length)	-	250	Including GST 18%
4.1.5(Patch Height)	-	250	Including GST 18%
4.1.6(Length of Valve)	-	250	Including GST 18%
4.1.7(Width of Valve Sleeve)	-	250	Including GST 18%
4.1.8(Length of Valve Sleeve)	-	250	Including GST 18%
5.1(Raw Material)	-	2500	Including GST 18%
5.2(Fabric)	-	500	Including GST 18%
5.2(Tape density and width)	-	1000	Including GST 18%
5.4(Lamination for PP)	-	2000	Including GST 18%
5.4(Lamination for LDPE)	-	2000	Including GST 18%
6.1(Mass of Bale)	-	500	Including GST 18%
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	3000	Including GST 18%
6.2.2(Weld Strength of Top and Bottom Closures)	-	3000	Including GST 18%
6.3(Drop Impact Testing of Filled Sacks)	-	2500	Including GST 18%
6.4(Ash Content)	-	1500	Including GST 18%
6.5(Air Permeability)	-	3500	Including GST 18%
8(Atomspheric Conditions for Conditioning and Testing)	-	500	Including GST 18%
Cl-5.6(Capacity)	-	500	Including GST 18%
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	250	Including GST 18%
Cl-6.6, Table-1 (iii)(Picks per dm)	-	250	Including GST 18%
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	Including GST 18%

Complete

21 Jul, 2028

-
Included w.e.f 27.03.2025

909

Alpha Test House Services LLP

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
Clause - 6.1.1, Table-1( ALUMINIUM)	-	15000	-
Clause - 6.1.1, Table-1(SILICON)	-	15000	-
Clause - 6.1.1, Table-1(NITROGEN)	-	15000	-
Clause - 6.1.1, Table-1(MANGANESE)	-	15000	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	15000	-
Clause - 6.1.1, Table-1(SULPHUR)	-	15000	-
Clause - 6.1.1, Table-1( CARBON)	-	15000	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
6.1.1(MANGANESE)	-	15000	-
6.1.1(PHOSPHORUS)	-	15000	-
6.1.1(SULPHUR)	-	15000	-
6.1.1(CARBON)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 15(Workmanship)	-	15000	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	15000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	15000	-
Cl. 14.1.1(Elongation)	-	15000	-
Cl. 14.1(Tensile Strength)	-	15000	-
Cl. 3.3, 10.2(Plain End)	-	15000	-
Cl. 11(Length)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	15000	-
Cl. 6.5(Height of Internal Fin)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	15000	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	15000	-
Clause 14.1.1(Elongation Percent)	-	15000	-
Clause 11.3(Approximate Length)	-	15000	-
Clause 11.2(Exact Length)	-	15000	-
Clause 11.1(Random Length)	-	15000	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	15000	-
Cl 15(Workmanship)	-	15000	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	15000	-
Cl 12(Workmanship)	-	15000	-
Cl 10.1.1(Manufacturing )	-	15000	-
Cl 10.1(Manufacturing )	-	15000	-
Cl 8(Outer Diameter, Thickness & Mass)	-	15000	-
17(Marking)	-	15000	-
cl.17(MARKING)	-	15000	-
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	15000	-

Complete

31 Dec, 2026

-
-

910

Bharat Test House Pvt. Ltd.

IS 5145 (1969)

Specification for walking sticks

Walking Sticks

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.1(Wood)	-	1000	-
Cl.2.2(ALUMINIUM)	-	4000	-
Cl.4(MANUFACTURE)	-	200	-
Cl.5(WORKMANSHIP AND FINISH)	-	200	-
Cl.6.1(STRENGTH TEST)	-	700	-
Cl.7(MARKING)	-	200	-
Cl.8(PACKING)	-	200	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-3(Shapes and Dimensions)	-	500	-
Cl-6.2.1(Strength of joint between handle and the stick)	-	1000	-

Complete

26 Jul, 2027

-
Included w.e.f 25.02.2025

911

CENTRAL POWER RESEARCH INSTITUTE

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

1065000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	30000	-
5.2.1(Spring Hammer Test)	-	800	-
5.2.2(Shock Test)	-	2150	-
5.2.3(Vibration Test)	-	2500	-
5.2.4(Test of Resistance to Heat and Fire)	-	8575	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	14590	-
5.3.1(Dry Heat Test)	-	9950	-
5.3.2(Cold Test)	-	9950	-
5.3.3(Damp Heat Cyclic Test)	-	24375	-
5.4.1(Test of Power Consumption)	-	6600	-
5.4.2(Test of influence of voltage dips and interruptions)	-	2500	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	37500	-
5.4.4(Test of Influence of Self-Heating)	-	3000	-
5.4.5(Test of Influence of Heating)	-	2650	-
5.4.6.2(Impulse voltage test)	-	6600	-
5.4.6.3(a.c. voltage test)	-	650	-
5.4.6.4(Insulation resistance test)	-	590	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	19530	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	34740	-
5.5.4(Fast Transient Burst Test)	-	11590	-
5.5.5(Radio Interference Measurement)	-	13900	-
5.5.6(Surge Immunity Test)	-	6960	-
5.6.2(Test of Influence Quantities)	-	18600	-
5.6.3(Test of No-Load Condition)	-	1350	-
5.6.4(Test of Starting Condition)	-	1350	-
5.6.5(Test of Meter Constant)	-	1350	-
5.6.6(Interpretation of Test Results)	-	700	-
5.7(Test of the Load Switch operation for payment function)	-	18000	-
5.8(Test of Charging Functions)	-	1750	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	1750	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	10000	-
6(FUNCTIONAL REQUIREMENTS)	-	5500	-

Complete

30 Jun, 2027

-
Included w.e.f 03.03.2025

912

TUV Rheinland (India) Pvt., Ltd.

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

1225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	75000	-
10.2(Accessibility test (MST 11))	-	50000	-
10.3(Cut susceptibility test (MST 12))	-	50000	-
10.4(Ground Continuity Test (MST 13))	-	75000	-
10.5(Impulse voltage test (MST 14))	-	100000	-
10.6(Dielectric withstand test (MST 16))	-	125000	-
10.7(Temperature test (MST 21))	-	150000	-
10.8(Fire test (MST 23))	-	400000	-
10.9(Reverse Current overload test (MST 26))	-	150000	-
10.10(Module breakage test (MST 32))	-	50000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(UV resistance (MST 54))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Hot spot test (MST 22))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	Testing charge for this clause included in IS 14286: 2010

Complete

10 Sep, 2027

-
-

913

TUV Rheinland (India) Pvt., Ltd.

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	25000	-
4(Construction requirements)	-	50000	-
5(Polymeric materials)	-	25000	-
6(Internal wiring and current-carrying parts)	-	25000	-
7(Connections)	-	25000	-
8(Bonding and grounding)	-	25000	-
9(Creepage and clearance distances)	-	25000	-
10(Field wiring compartments with covers)	-	25000	-
11(Marking)	-	25000	-

Complete

10 Sep, 2027

-
-

914

TUV Rheinland (India) Pvt., Ltd.

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

850000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual inspection)	-	25000.00	-
10.2(Maximum power determination)	-	50000.00	-
10.3(Insulation test)	-	25000.00	-
10.4(Measurement of temperature coefficients)	-	50000.00	-
10.5(Measurement of NOCT)	-	50000.00	-
10.6(Performance at STC and NOCT)	-	10000.00	-
10.7(Performance at low irradiance)	-	7500.00	-
10.8(Outdoor exposure test)	-	7500.00	-
10.9(Hot-spot endurance test)	-	75000.00	-
10.10(UV preconditioning)	-	50000.00	-
10.11(Thermal cycling test)	-	150000.00	-
10.12(Humidity freeze test)	-	75000.00	-
10.13(Damp heat test)	-	75000.00	-
10.14(Robustness of termination test)	-	25000.00	-
10.15(Wet leakage current test)	-	25000.00	-
10.16(Mechanical load test)	-	50000.00	-
10.17(Hail test)	-	50000.00	-
10.18(Bypass diode thermal' test)	-	40000.00	-
4(Marking)	-	10000.00	-

Complete

10 Sep, 2027

-
-

915

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

TYPE-I, TYPE-II & TYPE-III

30820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2500	GST charges Extra
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1800	GST charges Extra
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500	GST charges Extra
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	250	GST charges Extra
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	250	GST charges Extra
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	GST charges Extra
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	3000	GST charges Extra
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1500	GST charges Extra
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1500	GST charges Extra
5.3(Lamination)	-	1500	GST charges Extra
5.4(Sack Fabrication)	-	500	GST charges Extra
5.5(Capacity)	-	500	GST charges Extra
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	14520	UV Resistance- 11520 + breaking strength-3000.0 (GST charges Extra)
7(PRINTING, PACKAGING AND MARKING)	-	500	GST charges Extra
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	500	GST charges Extra
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

Complete

21 Jul, 2028

-
Included w.e.f 27.03.2025

916

Alpha Test House Services LLP

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

Stainless Steel Utensils

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Material used for manufacturing utensils)	-	24500	-
Cl 3.2(Material used for composite bottom)	-	24500	-
Cl 3.3(Material used for body of utensil of 3-ply construction)	-	24500	-
Cl 3.4(Material used for stainless steel lid)	-	24500	-
Cl 3.5(Material used for tempered glass lid)	-	24500	-
Cl 3.5(Material used for stainless steel rim)	-	24500	-
Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil)	-	24500	-
Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil)	-	24500	-
Cl 4.2(Thickness of the finished utensil)	-	24500	-
Cl 4.3(Classification)	-	24500	-
Cl 4.4 (i)(Thickness of Aluminium disc/core)	-	24500	-
Cl 4.4 (ii)(Thickness of Protector/cowl)	-	24500	-
Cl 4.5(Minimum sheet thickness (3-ply utensil))	-	24500	-
Cl 4.5(Thickness of finished utensil (3-ply utensil))	-	24500	-
Cl 5.1(Manufacturing defect & visual appearance)	-	24500	-
CL 5.2(Accessibility for cleaning)	-	24500	-
Cl 5.3(Joining of handles to the utensils)	-	24500	-
Cl 5.4(Requirement for handles)	-	24500	-
Cl 5.5(Welding (Finish))	-	24500	-
Cl 5.6(Finish of 3-ply utensil)	-	24500	-
Cl 5.7(Requirement for coating)	-	24500	-
Cl 5.8(Coating thickness test)	-	24500	-
Cl 5.8(Coating adhesion test)	-	24500	-
Cl 5.8.1(Thermal shock test (Coating))	-	24500	-
Cl 6.1(Staining Test (Type Test - Frequency Once in a Year))	-	24500	-
Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only))	-	24500	-
Cl 6.3(Thermal Shock Test (for Cladded Utensils Only))	-	24500	-
Cl 6.4(Dry Heat Test (for Cladded Utensils Only))	-	24500	-
Cl 6.5(Coating Thickness Test (for Copper Deposit))	-	24500	-
Cl 6.6(Thermal shock test (3-ply construction utensil body))	-	24500	-
Cl 6.7(Nominal Capacity Test)	-	24500	-
Cl 8(Marking)	-	24500	-

Complete

31 Dec, 2026

-
Included w.e.f 13.02.2025

917

BIS, Guwahati Branch Laboratory (GBL)

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
6.1 (Load Bearing Capacity Test - Cl. 6.1, IS 5913)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-
12 (Marking - Indication of source of manufacture - Cl. 12)	-
12 (Marking - Year & Date of manufacture - Cl. 12)	-
12 (Marking - Pictorial warning signs as given in IS 12081 (Part 2) : 1987 - Cl. 12)	-
6.2 (Impermeability)	-

Partial

-
-

918

Alpha Test House Private Limited.

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	50	-
5(General conditions for the tests)	-	50	-
6(Classification)	-	50	-
7(Marking and instructions)	-	250	-
8(Protection against access to live parts)	-	100	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	500	-
11(Heating)	-	200	-
13(Leakage current and electric strength at operating temperature)	-	500	-
14(Transient overvoltages)	-	100	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
18(Endurance)	-	100	-
19(Abnormal operation)	-	100	-
20(Stability and mechanical hazards)	-	100	-
21(Mechanical strength)	-	200	-
22(Construction)	-	500	-
23(Internal wiring)	-	100	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	100	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	200	-
28(Screws and connections)	-	200	-
29(Clearances, creepage distances and solid insulation)	-	200	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
A.101(Pressure test)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	200	-
22.102(Closed water heaters)	-	200	-
22.103(Addition)	-	200	-
22.104(Addition)	-	200	-
22.105(Cistern-type water heaters)	-	200	-
22.109(Addition)	-	200	-

Complete

17 May, 2027

-
Included .w.e.f.11.02.2025 Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC)

919

National Soil Testing and Research Laboratories

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	200	-
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	200	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	200	-
5.4.2-IS: 3025(P-11)(Ph)	-	200	-
Cl 5.4 (b)(Alkalinity)	-	200	-
Cl 5.4 (a)(Acidity)	-	200	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	200	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	200	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	200	-
Cl 5.4 Table 1 (iv)(Chloride)	-	200	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	200	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	200	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	200	-
Cl 5.4 .2(pH)	-	200	-
16.1(Average Compressive Strength)	-	2000	-
16.1(Compressive Strength of Individual Samples )	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	200	-
16.1(Compressive Strength of Individual Samples )	-	700	-
Clause 5.4(Description)	-	1000	-
5.1(Cement)	-	0.0	-
5.2(Mineral Admixtures)	-	0.0	-
5.3(Aggregates)	-	0.0	-
5.6(Reinforcement)	-	0.0	-
5.7(Storage of Materials)	-	0.0	-
7(Workability of Concrete)	-	0.0	-
8(Durability of concrete)	-	0.0	-
9(Concrete mix proportioning)	-	0.0	-
16.2(Flexural Strength)	-	0.0	-
17.4(Core test)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	200	-
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	200	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	200	-
5.4.2-IS: 3025(P-11)(Ph)	-	200	-
Cl 5.4 (b)(Alkalinity)	-	200	-
Cl 5.4 (a)(Acidity)	-	200	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	200	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	200	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	200	-
Cl 5.4 Table 1 (iv)(Chloride)	-	200	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	200	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	200	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	200	-
Cl 5.4 .2(pH)	-	200	-
16.1(Average Compressive Strength)	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	200	-
16.1(Compressive Strength of Individual Samples )	-	700	-
Clause 5.4(Description)	-	0.0	-
5.1(Cement)	-	0.0	-
5.2(Mineral Admixtures)	-	0.0	-
5.3(Aggregates)	-	0.0	-
5.6(Reinforcement)	-	0.0	-
5.7(Storage of Materials)	-	0.0	-
7(Workability of Concrete)	-	0.0	-
8(Durability of concrete)	-	0.0	-
9(Concrete mix proportioning)	-	0.0	-
16.2(Flexural Strength)	-	0.0	-
17.4(Core test)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-

Complete

28 Nov, 2027

-
Included w.e.f. 24.02.2025 Exclusion Breaking strength above 96 mm

920

ACE TEST HOUSE PRIVATE LIMITED

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

Grade-BWP/MR

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	0	--
Clause No -6.2(Alternative Materials (LVL)	-	0	--
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	--
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	--
Clause No -6.2(Alternative Materials -plywood)	-	0	--
Clause No -6.2(BWP grade flush door shutter)	-	0	--
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	--
Clause No -6.4(Adhesive)	-	0	--
Clause No -7.1(Construction)	-	0	--
Clause No - 7.3(" MDF board or HDF board ")	-	0	--
Clause No -9.2("Workmanship and finish")	-	200	--
Clause No -10.1(tests for flush door shutters)	-	21000	15% Discount for BIS Samples
Clause No -10.2(End Immersion Test)	-	2500	15% Discount for BIS Samples
Clause No -10.3(Glue Adhesion Test)	-	1500	15% Discount for BIS Samples
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	--
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	--
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	0	--
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	--
Cl-6.3.2(MDF board and HDF board)	-	0	--
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	0	--
Cl-7.2(Face Panel)	-	0	---
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	--
Cl-8(Fittings)	-	0	--
Clause No - 6.1(Timber)	-	0	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	0	-
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	0	-
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	0	-
Clause No -10.1(tests for flush door shutters)	-	0	-
Clause No -10.2(End Immersion Test)	-	0	-
Clause No -10.3(Glue Adhesion Test)	-	0	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	0	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	0	-
Cl-7.2(Face Panel)	-	0	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	-
Cl-8(Fittings)	-	0	-

Complete

26 Aug, 2027

-
Included w.e.f 04.03.2025

921

Unique Test House

IS 3989 (2024)

CENTRIFUGALLY CAST (SPUN) IRON SPIGOT AND SOCKET PIPES, FITTINGS AND ACCESSORIES ï¿½ SPECIFICATION (Fourth Revision)

All sizes

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(General requirements)	-	2000	-
Cl-4(MATERIALS AND MANUFACTURE)	-	1000	-
Cl-5(HAMMER TEST)	-	1500	-
Cl-6(HYDROSTATIC TEST)	-	2500	-
Cl-7(SIZES)	-	1000	-
Cl-8(TOLERANCES)	-	500	-
Cl-8.1 (i)(External diameter of barrel, DE)	-	500	-
Cl-8.1 (ii)(Internal diameter of socket, DI)	-	1000	-
Cl-8.1 (iii)(Depth of socket, P)	-	500	-
Cl-8.2(Tolerance on length)	-	500	-
Cl-8.3(Tolerances on dimensions)	-	500	-
Cl-8.4(Tolerance on wall thickness)	-	500	-
Cl-9(Coating)	-	1000	-
Cl-10(Marking)	-	500	-

Complete

07 Sep, 2025

-
Included.w.e.f.31.01.2025

922

National Test House (WR), Mumbai

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	i)Test facility up to 200 mm. Diameter pipes
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	2000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1500	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1500	-
5.2.1.1, T2(Compound ash content - Any Method)	-	2000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1500	-
5.3(Density of Higher olefin - IS 7328:2020)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1500	-
5.3(Ash content- Any Method)	-	2000	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	-
6(Pipe Description - IS 14333-2022)	-	500	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	500	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	500	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	7500	Up to 100 hours
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	5000	Up to 48 hours
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	7500	Up to 165 hours
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	20000	Up to 1000 hours
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	5000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1500	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2000	-
8.6(Density-IS 7328:2020)	-	1000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	10000	-

Complete

24 Jul, 2025

-
Included.w.e.f.10.02.2025 Exclusion Cl 5.3 (Carbon black particle size- Any Method) Cl 5.4 ( Antioxidant-Any Method) Cl 5.3 ( Olefin Constituents-14333-2022) Cl 5.3 ( Toluene extract-Any Method ) Cl 5.2.1.1, T2 (Compound Carbon black particle size-Any Method)

923

BIS, Central Laboratory (CL)

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.3 Table-1,2 (Dimensions- Pitch- p)	-
Cl-3.3 Table-1,2 (Dimensions- Roller diameter- d1)	-
Cl-3.3 Table-1,2 (Dimensions- Width between inner plates- b1)	-
Cl-3.3 Table-1,2 (Dimensions- Bearing pin body diameter- d2)	-
Cl-3.3 Table-1,2 (Dimensions-Bush bore-d3)	-
Cl-3.3 Table-1,2 (Dimensions- Chain path depth- h1)	-
Cl-3.3 Table-1,2 (Dimensions-Inner plate depth- h2)	-
Cl-3.3 Table-1,2 (Dimensions- Cranked link dimensions- l1)	-
Cl-3.3 Table-1,2 (Dimensions- Cranked link dimensions- l2)	-
Cl-3.3 Table-1,2 (Dimensions- Cranked link dimensions- c)	-
Cl-3.3 Table-1,2 (Dimensions- Transverse pitch- pt)	-
Cl-3.3 Table-1,2 (Dimensions- Width over inner link- b2)	-
Cl-3.3 Table-1,2 (Dimensions- Width between outer plates- b3)	-
Cl-3.3 Table-1,2 (Dimensions- Width over bearing pins- b4)	-
Cl-3.3 Table-1,2 (Dimensions- Width over bearing pins- b5)	-
Cl-3.3 Table-1,2 (Dimensions- Width over bearing pins- b6)	-
Cl-3.3 Table-1,2 (Dimensions- Additional width for joint fastener- b7)	-
Cl-3.3 Table-1,2 (Measuring force)	-
Cl-3.4.3 (Preloading)	-
Cl-3.3, 3.4.2 Table-1,2 (Minimum tensile strength)	-
Cl-3.4.4 (Length validation)	-
Cl-3.5 (Marking)	-

Partial

-
-

924

URS PRODUCTS AND TESTING PVT. LTD.

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

Personal Protective Equipment Part 4 Occupational Footwear

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	100	-
Cl 5.2.2(" Height of upper ")	-	250	-
Cl 5.2.3(Heel area)	-	500	-
Cl 5.3.1.1(Construction of whole footwear)	-	500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	600	-
Cl 5.3.2(Leak proofness)	-	600	-
Cl 5.3.3(Specific ergonomic features)	-	600	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	2500	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2500	-
Cl 5.3.6(Seam strength)	-	600	-
Cl 5.3.7(Lead Content ( National Annex A))	-	600	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.2(Thickness)	-	250	-
Cl 5.4.3(Tear strength)	-	600	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	600	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	600	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	600	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	600	-
Cl 5.4.5(Flexing resistance)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	600	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	600	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	250	-
Cl 5.8.2.2(Cleated area)	-	250	-
Cl 5.8.2.3(Cleat height)	-	250	-
Cl 5.8.3(Outsole- Tear strength)	-	600	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	600	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	600	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	600	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	600	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	600	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	600	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	600	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	600	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	2500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	2500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1500	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	600	-
Cl 6.2.7.3(Resistance to cutting)	-	1500	-
Cl 6.2.8(Scuff cap)	-	800	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	600	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	600	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	600	-
Cl 7("Marking ")	-	100	-

Complete

26 Sep, 2027

-
Included w.e.f. 17.02.2025 Exclusion: Cl 6.2.6 (Ankle protection)

925

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

38400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	10 % discount to BIS
Cl 5.2.2(" Height of upper ")	-	250	10 % discount to BIS
Cl 5.2.3(Heel area)	-	250	10 % discount to BIS
Cl 5.3.1.1(Construction of whole footwear)	-	250	10 % discount to BIS
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	10 % discount to BIS
Cl 5.3.2(Leak proofness)	-	1000	10 % discount to BIS
Cl 5.3.3(Specific ergonomic features)	-	500	10 % discount to BIS
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1500	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	10 % discount to BIS
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	10 % discount to BIS
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	10 % discount to BIS
Cl 5.3.6(Seam strength)	-	800	10 % discount to BIS
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	10 % discount to BIS
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	10 % discount to BIS
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	10 % discount to BIS
Cl 5.4.2(Thickness)	-	250	10 % discount to BIS
Cl 5.4.3(Tear strength)	-	800	10 % discount to BIS
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	800	10 % discount to BIS
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	800	10 % discount to BIS
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	800	10 % discount to BIS
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	800	10 % discount to BIS
Cl 5.4.5(Flexing resistance)	-	1000	10 % discount to BIS
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	10 % discount to BIS
Cl 5.4.7(Resistance to hydrolysis)	-	2000	10 % discount to BIS
Cl 5.5.2(Lining- Tear strength)	-	800	10 % discount to BIS
Cl 5.5.3(Lining- Abrasion resistance)	-	1200	10 % discount to BIS
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	10 % discount to BIS
Cl 5.6.2(Tear strength of tongue)	-	800	10 % discount to BIS
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	10 % discount to BIS
Cl 5.7.2(Water permeability of insock)	-	500	10 % discount to BIS
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	10 % discount to BIS
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	10 % discount to BIS
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1200	10 % discount to BIS
Cl 5.8.2.1(Thickness of Outsole)	-	250	10 % discount to BIS
Cl 5.8.2.2(Cleated area)	-	250	10 % discount to BIS
Cl 5.8.2.3(Cleat height)	-	250	10 % discount to BIS
Cl 5.8.3(Outsole- Tear strength)	-	800	10 % discount to BIS
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	10 % discount to BIS
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	10 % discount to BIS
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	10 % discount to BIS
Cl 5.8.7(Interlayer bond strength)	-	800	10 % discount to BIS
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	10 % discount to BIS
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	10 % discount to BIS
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	10 % discount to BIS
Cl 6.2.1.2(Construction of perforation resistant insert)	-	250	10 % discount to BIS
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	10 % discount to BIS
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	10 % discount to BIS
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	10 % discount to BIS
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	10 % discount to BIS
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	2000	10 % discount to BIS
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	2000	10 % discount to BIS
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	2000	10 % discount to BIS
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	10 % discount to BIS
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	10 % discount to BIS
Cl 6.2.4(Energy absorption of seat region)	-	1000	10 % discount to BIS
Cl 6.2.5(Water resistance)	-	1000	10 % discount to BIS
Cl 6.2.6(Ankle protection)	-	800	10 % discount to BIS
Cl 6.2.7.1(Cut resistance footwear- design)	-	250	10 % discount to BIS
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	250	10 % discount to BIS
Cl 6.2.7.3(Resistance to cutting)	-	1200	10 % discount to BIS
Cl 6.2.8(Scuff cap)	-	1200	10 % discount to BIS
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1500	10 % discount to BIS
Cl 6.3(Upper — Water penetration and absorption)	-	1200	10 % discount to BIS
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	10 % discount to BIS
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	10 % discount to BIS
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	10 % discount to BIS
Cl 6.4.3.2(Design of Ladder grip)	-	250	10 % discount to BIS
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	10 % discount to BIS
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	10 % discount to BIS
Cl 7("Marking ")	-	150	10 % discount to BIS
Cl 5.2(Design)	-	0	-
Cl 5.2.2(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2(Leak proofness)	-	0	-
Cl 5.3.3(Specific ergonomic features)	-	0	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.6(Seam strength)	-	0	-
Cl 5.3.7(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	0	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	0	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.7.3(Resistance to cutting)	-	0	-
Cl 6.2.8(Scuff cap)	-	0	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7("Marking ")	-	0	-
Cl 5.2(Design)	-	0	-
Cl 5.2.2(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2(Leak proofness)	-	0	-
Cl 5.3.3(Specific ergonomic features)	-	0	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.6(Seam strength)	-	0	-
Cl 5.3.7(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	0	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	0	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.7.3(Resistance to cutting)	-	0	-
Cl 6.2.8(Scuff cap)	-	0	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7("Marking ")	-	0	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2(Leak proofness)	-	-	-
Cl 5.3.3(Specific ergonomic features)	-	-	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.6(Seam strength)	-	-	-
Cl 5.3.7(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	-	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6(Ankle protection)	-	-	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	-	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.7.3(Resistance to cutting)	-	-	-
Cl 6.2.8(Scuff cap)	-	-	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7("Marking ")	-	-	-

Complete

21 Jul, 2028

-
Included w.e.f.07.03.2025 Exclusion Cl 6.2.7 (Ankle Protection)

926

BIS, Central Laboratory (CL)

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Design)	-
Cl 5.2.2, Table 4 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.5.2, Table 7 (Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 6.2.10 , Table 19 ("Slip resistance on ceramic tile floor with glycerine ")	-

Partial

-
Except Hydrolysis and Additional Requirements

927

Conformity Testing Labs Pvt. Ltd. Unit 2

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.4(Electromagnetic compatibility tests)	-	600000		-
9.4(Electromagnetic compatibility tests)	-	0		-

Complete

05 Apr, 2027

-
Included w.e.f. 06.02.2025, Only for EMC test

928

TVS LABS

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

UP TO AND INCLUDING 32A

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	10	-
Cl-5(General notes on tests)	-	10	-
Cl-6(Rating)	-	20	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	150	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	150	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	-
Cl-11(Provision for earthing)	-	200	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-24.2(Resistance to tracking)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	2500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	3000	-
Cl-19(Normal operation)	-	2500	-
Cl-4(General Requirements)	-	10	-
Cl-5(General notes on tests)	-	10	-
Cl-6(Rating)	-	20	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	150	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	150	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	-
Cl-11(Provision for earthing)	-	200	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	2000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-24.2(Resistance to tracking)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-

Complete

18 Oct, 2025

-
-

929

PLANET ANALYSIS PRIVATE LIMITED

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	0	5 % DISCOUNT TO BIS SAMPLES ONLY
Cl. No.5("SIZE AND FITTINGS ")	-	0	-
Cl. No.6("CONSTRUCTION ")	-	0	-
Cl. No.7(MATERIAL)	-	0	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	750	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	400	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	400	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	400	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	400	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	500	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	500	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	800	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	800	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	600	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	600	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	25000	-
Cl. No.9.(MARKING AND PACKING)	-	0	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	600	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	500	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	600	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	800	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	25000	INNOCUOUSNESS Test Rs. 25000
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	800	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	500	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	500	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	0	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	300	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	0	REPEATED
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	0	REPEATED
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	25000	INNOCUOUSNESS Test Rs. 25000

Complete

20 Jan, 2028

-
-

930

PLANET ANALYSIS PRIVATE LIMITED

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

5350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Fibre Identification)	-	400	5 % DISCOUNT TO BIS SAMPLE ONLY
4.2, Table 1, i)(Count of yarn (for guidance only))	-	500	-
4.2, Table 1, ii)(Threads, dm, Min)	-	250	-
4.2, Table 1, iii)(Mass, g/m2)	-	300	-
4.2, Table 1, iv)(Length, m, tolerance)	-	125	-
4.2, Table 1, v)(Width, m, tolerance)	-	125	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	300	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	400	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	500	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	1000	IS/ISO 105 B 02
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	350	-
4.2, Table 1, x)(Sterility (optional))	-	600	-
6(Marking)	-	500	-
4.1(Fibre Identification)	-	0	REPEATED
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	REPEATED
4.2, Table 1, ii)(Threads, dm, Min)	-	0	REPEATED
4.2, Table 1, iii)(Mass, g/m2)	-	0	REPEATED
4.2, Table 1, iv)(Length, m, tolerance)	-	0	REPEATED
4.2, Table 1, v)(Width, m, tolerance)	-	0	REPEATED
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	REPEATED
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	REPEATED
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	REPEATED
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	REPEATED
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	REPEATED
4.2, Table 1, x)(Sterility (optional))	-	0	REPEATED
6(Marking)	-	0	REPEATED
6(Marking)	-	0	400

Complete

20 Jan, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number