| 871 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 733 (2025) |
Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision) |
ALL TYPES |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General requirements) |
- |
1000 |
|
- |
| Cl-6.1, Table-1 to 8(Fe) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Cu) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Mn) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Mg) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Cr) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Zn) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Ti) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(V) |
- |
4000 |
|
- |
| Cl-6.1, Table-1 to 8(Aluminium) |
- |
4000 |
|
- |
| Cl-6.2(chemical analysis) |
- |
4000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Dimensions) |
- |
1000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa) |
- |
4000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa) |
- |
4000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent) |
- |
4000 |
|
- |
| Cl-9(Dimensions and Tolerances) |
- |
4000 |
|
- |
| Cl-12(Packaging and Marking) |
- |
1000 |
|
- |
| Cl-7.1(Tensile test) |
- |
4000 |
|
- |
| Cl-5(Freedom from Defects) |
- |
1000 |
|
- |
| Cl-6.1, Table-1 to 8(Si) |
- |
4000 |
|
- |
|
19 Jun, 2028 |
-
Included w.e.f. 17.02.2026 |
| 872 |
AADIDEV TEST & RESEARCH CENTRE LLP
| 8194926
| IS 9968 : Part 1 (2025) |
Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision) |
1100 Volts |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(Copper Conductor) |
- |
0 |
|
- |
| Cl-4.2(Aluminum Conductor) |
- |
0 |
|
- |
| Cl-6.1(Proofed Tape) |
- |
0 |
|
- |
| Cl-6.2("Polyethylene Terephthalate (PETP) Tape or
Plastic Tape or Any Other Suitable Tape") |
- |
0 |
|
- |
| Cl-6.3(Glass Tape) |
- |
0 |
|
- |
| Cl-7(Fillers) |
- |
0 |
|
- |
| Cl-8.1(Textile Braid) |
- |
0 |
|
- |
| Cl-8.2(Glass Braid) |
- |
0 |
|
- |
| Cl-9.1(General Service Insulated Cables and Flexible Cords) |
- |
0 |
|
- |
| Cl-9.2(Heat Resisting Insulated Cables) |
- |
0 |
|
- |
| Cl-9.3(Silicon Rubber Insulated Cable) |
- |
0 |
|
- |
| Cl-10.1(Preservative Compound) |
- |
0 |
|
- |
| Cl-10.2(Varnish) |
- |
0 |
|
- |
| Cl-12(separator tape) |
- |
0 |
|
- |
| Cl-14(Core Identification) |
- |
0 |
|
- |
| Cl-18(Laying UP of Cores) |
- |
0 |
|
- |
| Cl-19(Binder Tape) |
- |
0 |
|
- |
| Cl-20.2(Thickness of Sheath) |
- |
500 |
|
- |
| Cl-20.3(Tolerance on Thickness of Sheath) |
- |
500 |
|
- |
| Cl-20.4(Colour) |
- |
0 |
|
- |
| Cl-22.1 (i) (a)(Conductor resistance test) |
- |
1000 |
|
- |
| Cl-22.1 (i) (b)(High voltage test or spark test.) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (a)(Annealing test (for copper);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (c)(Wrapping test (for aluminium);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (g)(Hot set test for insulation and sheath) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (h)(High voltage test) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (i)(Insulation resistance test) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter) |
- |
500 |
|
- |
| Electrical(Tensile strength and elongation at break) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (g), 2(Ageing in air oven) |
- |
3500 |
|
- |
| Cl-22.1 (iii) (g), 3(Ageing in air bomb) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb) |
- |
4000 |
|
- |
| Cl-22.1 (iii) (g), 5(Hot set) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (g), 6(Oil resistance;) |
- |
500 |
|
- |
| Cl-22.1 (iii) (g), 7(Tear resistance) |
- |
500 |
|
- |
| Cl-22.1 (iii) (i)(High voltage (water immersion) test;) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (j)(Flammability test) |
- |
500 |
|
- |
| Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable)) |
- |
5000 |
|
- |
| Cl-24.1(Manufacturer’s Identification) |
- |
0 |
|
- |
| Cl-25(Packing and Morning) |
- |
0 |
|
- |
| Cl-4.1(Copper Conductor) |
- |
0 |
|
- |
| Cl-4.2(Aluminum Conductor) |
- |
0 |
|
- |
| Cl-6.1(Proofed Tape) |
- |
0 |
|
- |
| Cl-6.2("Polyethylene Terephthalate (PETP) Tape or
Plastic Tape or Any Other Suitable Tape") |
- |
0 |
|
- |
| Cl-6.3(Glass Tape) |
- |
0 |
|
- |
| Cl-7(Fillers) |
- |
0 |
|
- |
| Cl-8.1(Textile Braid) |
- |
0 |
|
- |
| Cl-8.2(Glass Braid) |
- |
0 |
|
- |
| Cl-9.1(General Service Insulated Cables and Flexible Cords) |
- |
0 |
|
- |
| Cl-9.2(Heat Resisting Insulated Cables) |
- |
0 |
|
- |
| Cl-9.3(Silicon Rubber Insulated Cable) |
- |
0 |
|
- |
| Cl-10.1(Preservative Compound) |
- |
0 |
|
- |
| Cl-10.2(Varnish) |
- |
0 |
|
- |
| Cl-12(separator tape) |
- |
0 |
|
- |
| Cl-14(Core Identification) |
- |
0 |
|
- |
| Cl-18(Laying UP of Cores) |
- |
0 |
|
- |
| Cl-19(Binder Tape) |
- |
0 |
|
- |
| Cl-20.2(Thickness of Sheath) |
- |
500 |
|
- |
| Cl-20.3(Tolerance on Thickness of Sheath) |
- |
500 |
|
- |
| Cl-20.4(Colour) |
- |
0 |
|
- |
| Cl-22.1 (i) (a)(Conductor resistance test) |
- |
500 |
|
- |
| Cl-22.1 (i) (b)(High voltage test or spark test.) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (a)(Annealing test (for copper);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (c)(Wrapping test (for aluminium);) |
- |
500 |
|
- |
| Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (g)(Hot set test for insulation and sheath) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (h)(High voltage test) |
- |
1000 |
|
- |
| Cl-22.1 (ii) (i)(Insulation resistance test) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);) |
- |
3500 |
|
- |
| Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter) |
- |
500 |
|
- |
| Electrical(Tensile strength and elongation at break) |
- |
500 |
|
- |
| Cl-22.1 (iii) (g), 2(Ageing in air oven) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (g), 3(Ageing in air bomb) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb) |
- |
4000 |
|
- |
| Cl-22.1 (iii) (g), 5(Hot set) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (g), 6(Oil resistance;) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (g), 7(Tear resistance) |
- |
500 |
|
- |
| Cl-22.1 (iii) (i)(High voltage (water immersion) test;) |
- |
1000 |
|
- |
| Cl-22.1 (iii) (j)(Flammability test) |
- |
500 |
|
- |
| Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable)) |
- |
4000 |
|
- |
| Cl-24.1(Manufacturer’s Identification) |
- |
0 |
|
- |
| Cl-25(Packing and Morning) |
- |
0 |
|
- |
| CL. 22.1 (iv) a,(Flexing test for Cords for use with electric iron) |
- |
2000 |
|
- |
|
29 Dec, 2028 |
-
included w.e.f 25.03.2026 |
| 873 |
Atckon Laboratories LLP, Bahadurgarh
| 8186436
| IS 2403 (2024) |
Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision) |
UPTO 1000KN FOR TENSILE STRENGTH, EXCLUDING ISO CHAIN NO.-240,48B,56B,64B,72B FOR DYNAMIC STRENGTH |
110000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.3 Table-1,2(Dimensions- Pitch- p) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions-Bush bore-d3) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7) |
- |
30000 |
|
- |
| Cl-3.3 Table-1,2(Measuring force) |
- |
30000 |
|
- |
| Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength) |
- |
40000 |
|
- |
| Cl-3.4.3(Preloading) |
- |
40000 |
|
- |
| Cl-3.4.4(Length validation) |
- |
40000 |
|
- |
| Cl-3.4.5(Dynamic testing) |
- |
40000 |
|
- |
| Cl-3.5(Marking) |
- |
1000 |
|
- |
| Cl-3.6(Cranked links) |
- |
30000 |
|
- |
| Cl-4.4, Table-3(Platform height h4) |
- |
30000 |
|
- |
| Cl-4.4, Table-3(Minimum hole diameter d4) |
- |
30000 |
|
- |
| Cl-4.4, Table-3(Traverse distance between hole centres f) |
- |
30000 |
|
- |
| Cl-4.4, Table-4(Height from chain centre line h5) |
- |
30000 |
|
- |
| Cl-4.4, Table-4(Minimum diameter of holes d4) |
- |
30000 |
|
- |
| Cl-4.4, Table-5(Pin extension Type “X” b8) |
- |
30000 |
|
- |
| Cl-4.4, Table-5(Pin extension Type “X” b5) |
- |
30000 |
|
- |
| Cl-4.4, Table-5(Pin extensiona Type “Y” b10) |
- |
30000 |
|
- |
| Cl-4.4, Table-5(Pin extensiona Type “Y” b9) |
- |
30000 |
|
- |
| Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2) |
- |
30000 |
|
- |
| Cl-4.6(Marking) |
- |
30000 |
|
- |
| Cl-5.3(Diametral dimensions of sprocket rim) |
- |
30000 |
|
- |
| Cl-5.4(Sprocket tooth gap forms) |
- |
30000 |
|
- |
| Cl-5.5(Tooth heights and tip diameters) |
- |
30000 |
|
- |
| Cl-5.6(Sprocket rim profiles) |
- |
30000 |
|
- |
| Cl-5.7(Radial run-out) |
- |
30000 |
|
- |
| Cl-5.8(Axial run-out (wobble)) |
- |
30000 |
|
- |
| Cl-5.9(Pitch accuracy of sprocket teeth) |
- |
30000 |
|
- |
| Cl-5.10(Number of teeth) |
- |
30000 |
|
- |
| Cl-5.11(Bore tolerance) |
- |
30000 |
|
- |
| Cl-12(Marking) |
- |
30000 |
|
- |
|
19 Jun, 2028 |
-
Included w.e.f. 17.02.2026
Excluding Clause 3.4.5 – Dynamic Testing |
| 874 |
Perfect International Testing Lab
| 8187826
| IS 302 : Part 2 : Sec 75 (2018) |
Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines |
-- |
75000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
500 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
500 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
500 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
500 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
500 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
500 |
|
N/A |
| 27.6(Provision for earthing) |
- |
500 |
|
N/A |
| 27.5(Provision for earthing) |
- |
500 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
500 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
500 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
500 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
500 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
200 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
200 |
|
N/A |
| 24.1(Components) |
- |
500 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
500 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
100 |
|
N/A |
| 23.5(Internal wiring) |
- |
100 |
|
N/A |
| 23.4(Internal wiring) |
- |
100 |
|
N/A |
| 23.3(Internal wiring) |
- |
500 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
100 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
500 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
500 |
|
N/A |
| 22.12(Constructions) |
- |
500 |
|
N/A |
| 22.11(Constructions) |
- |
100 |
|
N/A |
| 22.11(Constructions) |
- |
100 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
500 |
|
N/A |
| 22.6(Constructions) |
- |
500 |
|
N/A |
| 22.5(Constructions) |
- |
100 |
|
N/A |
| 22.4(Constructions) |
- |
100 |
|
N/A |
| 22.3(Constructions) |
- |
500 |
|
N/A |
| 22.2(Constructions) |
- |
100 |
|
N/A |
| 22.1(Constructions) |
- |
500 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
100 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
500 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
500 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
500 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
500 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
500 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
200 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
100 |
|
N/A |
| 16.3(Electric strength test) |
- |
500 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
200 |
|
N/A |
| 15.102(Moisture resistance) |
- |
500 |
|
N/A |
| 15.102(Moisture resistance) |
- |
200 |
|
N/A |
| 15.101(Moisture resistance) |
- |
200 |
|
N/A |
| 15.3(Moisture resistance) |
- |
500 |
|
N/A |
| 15.2(Moisture resistance) |
- |
500 |
|
N/A |
| 15.1(Moisture resistance) |
- |
500 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
200 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
500 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
500 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
100 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
100 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
500 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
500 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
100 |
|
N/A |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
500 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
100 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
500 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
100 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
100 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
100 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
100 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
500 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
500 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
500 |
|
N/A |
| 27.6(Provision for earthing) |
- |
500 |
|
N/A |
| 27.5(Provision for earthing) |
- |
500 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
500 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
500 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
500 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
500 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
500 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
500 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
500 |
|
N/A |
| 24.1(Components) |
- |
500 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
500 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
600 |
|
N/A |
| 23.5(Internal wiring) |
- |
500 |
|
N/A |
| 23.4(Internal wiring) |
- |
1000 |
|
N/A |
| 23.3(Internal wiring) |
- |
200 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
1000 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
1000 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
300 |
|
N/A |
| 22.12(Constructions) |
- |
1000 |
|
N/A |
| 22.11(Constructions) |
- |
400 |
|
N/A |
| 22.11(Constructions) |
- |
1000 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
1000 |
|
N/A |
| 22.6(Constructions) |
- |
1000 |
|
N/A |
| 22.5(Constructions) |
- |
1000 |
|
N/A |
| 22.4(Constructions) |
- |
300 |
|
N/A |
| 22.3(Constructions) |
- |
1000 |
|
N/A |
| 22.2(Constructions) |
- |
300 |
|
N/A |
| 22.1(Constructions) |
- |
300 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
500 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
1000 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
500 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
1000 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
1000 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
1000 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
300 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
1000 |
|
N/A |
| 16.3(Electric strength test) |
- |
1000 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
1000 |
|
N/A |
| 15.102(Moisture resistance) |
- |
1000 |
|
N/A |
| 15.102(Moisture resistance) |
- |
1000 |
|
N/A |
| 15.101(Moisture resistance) |
- |
1000 |
|
N/A |
| 15.3(Moisture resistance) |
- |
1000 |
|
N/A |
| 15.2(Moisture resistance) |
- |
200 |
|
N/A |
| 15.1(Moisture resistance) |
- |
1000 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
1000 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
500 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
500 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
500 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
500 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
200 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
500 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
300 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
500 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
400 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
0 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
0 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
0 |
|
N/A |
| 27.6(Provision for earthing) |
- |
0 |
|
N/A |
| 27.5(Provision for earthing) |
- |
0 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
0 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
0 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
0 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
0 |
|
N/A |
| 24.1(Components) |
- |
0 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
0 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
0 |
|
N/A |
| 23.5(Internal wiring) |
- |
0 |
|
N/A |
| 23.4(Internal wiring) |
- |
0 |
|
N/A |
| 23.3(Internal wiring) |
- |
0 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
0 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
0 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
0 |
|
N/A |
| 22.12(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
0 |
|
N/A |
| 22.6(Constructions) |
- |
0 |
|
N/A |
| 22.5(Constructions) |
- |
0 |
|
N/A |
| 22.4(Constructions) |
- |
0 |
|
N/A |
| 22.3(Constructions) |
- |
0 |
|
N/A |
| 22.2(Constructions) |
- |
0 |
|
N/A |
| 22.1(Constructions) |
- |
0 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
0 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
0 |
|
N/A |
| 16.3(Electric strength test) |
- |
0 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.101(Moisture resistance) |
- |
0 |
|
N/A |
| 15.3(Moisture resistance) |
- |
0 |
|
N/A |
| 15.2(Moisture resistance) |
- |
0 |
|
N/A |
| 15.1(Moisture resistance) |
- |
0 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
0 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
0 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
0 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
0 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
0 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
0 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
0 |
|
N/A |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
0 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
0 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
0 |
|
N/A |
| 27.6(Provision for earthing) |
- |
0 |
|
N/A |
| 27.5(Provision for earthing) |
- |
0 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
0 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
0 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
0 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
0 |
|
N/A |
| 24.1(Components) |
- |
0 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
0 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
0 |
|
N/A |
| 23.5(Internal wiring) |
- |
0 |
|
N/A |
| 23.4(Internal wiring) |
- |
0 |
|
N/A |
| 23.3(Internal wiring) |
- |
0 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
0 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
0 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
0 |
|
N/A |
| 22.12(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
0 |
|
N/A |
| 22.6(Constructions) |
- |
0 |
|
N/A |
| 22.5(Constructions) |
- |
0 |
|
N/A |
| 22.4(Constructions) |
- |
0 |
|
N/A |
| 22.3(Constructions) |
- |
0 |
|
N/A |
| 22.2(Constructions) |
- |
0 |
|
N/A |
| 22.1(Constructions) |
- |
0 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
0 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
0 |
|
N/A |
| 16.3(Electric strength test) |
- |
0 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.101(Moisture resistance) |
- |
0 |
|
N/A |
| 15.3(Moisture resistance) |
- |
0 |
|
N/A |
| 15.2(Moisture resistance) |
- |
0 |
|
N/A |
| 15.1(Moisture resistance) |
- |
0 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
0 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
0 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
0 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
0 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
0 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
0 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
0 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
0 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
0 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
0 |
|
N/A |
| 27.6(Provision for earthing) |
- |
0 |
|
N/A |
| 27.5(Provision for earthing) |
- |
0 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
0 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
0 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
0 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
0 |
|
N/A |
| 24.1(Components) |
- |
0 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
0 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
0 |
|
N/A |
| 23.5(Internal wiring) |
- |
0 |
|
N/A |
| 23.4(Internal wiring) |
- |
0 |
|
N/A |
| 23.3(Internal wiring) |
- |
0 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
0 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
0 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
0 |
|
N/A |
| 22.12(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
0 |
|
N/A |
| 22.6(Constructions) |
- |
0 |
|
N/A |
| 22.5(Constructions) |
- |
0 |
|
N/A |
| 22.4(Constructions) |
- |
0 |
|
N/A |
| 22.3(Constructions) |
- |
0 |
|
N/A |
| 22.2(Constructions) |
- |
0 |
|
N/A |
| 22.1(Constructions) |
- |
0 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
0 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
0 |
|
N/A |
| 16.3(Electric strength test) |
- |
0 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.101(Moisture resistance) |
- |
0 |
|
N/A |
| 15.3(Moisture resistance) |
- |
0 |
|
N/A |
| 15.2(Moisture resistance) |
- |
0 |
|
N/A |
| 15.1(Moisture resistance) |
- |
0 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
0 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
0 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
0 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
0 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
0 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
0 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
0 |
|
N/A |
| 32(Radiation, toxicity and similar hazards) |
- |
0 |
|
N/A |
| 31(Resistance to rusting) |
- |
0 |
|
N/A |
| 30.2.4(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.2(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 30.1(Resistance to heat and fire) |
- |
0 |
|
N/A |
| 29.3(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.2(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation) |
- |
0 |
|
N/A |
| 28.2 to 28.4(Screws and connections) |
- |
0 |
|
N/A |
| 28.1, Table No.-14(Screws and connections) |
- |
0 |
|
N/A |
| 27.6(Provision for earthing) |
- |
0 |
|
N/A |
| 27.5(Provision for earthing) |
- |
0 |
|
N/A |
| 27.1 to 27.4(Provision for earthing) |
- |
0 |
|
N/A |
| 26.10 & 26.11(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.9(Terminals for external conductors) |
- |
0 |
|
N/A |
| 26.1 to 26.8(Terminals for external conductors) |
- |
0 |
|
N/A |
| 25.16 to 25.25(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.15(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.14(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.9 to 25.13(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.8, Table No.-11(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.5 to 25.7(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.4(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.3(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.2(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 25.1(Supply connection and external flexible cords) |
- |
0 |
|
N/A |
| 24.101 to 24.103(Components) |
- |
0 |
|
N/A |
| 24.2 to 24.6(Components) |
- |
0 |
|
N/A |
| 24.1(Components) |
- |
0 |
|
N/A |
| 23.101 to 23.102(Internal wiring) |
- |
0 |
|
N/A |
| 23.6 to 23.10(Internal wiring) |
- |
0 |
|
N/A |
| 23.5(Internal wiring) |
- |
0 |
|
N/A |
| 23.4(Internal wiring) |
- |
0 |
|
N/A |
| 23.3(Internal wiring) |
- |
0 |
|
N/A |
| 23.1 & 23.2(Internal wiring) |
- |
0 |
|
N/A |
| 22.101 to 22.114(Constructions) |
- |
0 |
|
N/A |
| 22.13 to 22.48(Constructions) |
- |
0 |
|
N/A |
| 22.12(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.11(Constructions) |
- |
0 |
|
N/A |
| 22.7 to 22.10(Constructions) |
- |
0 |
|
N/A |
| 22.6(Constructions) |
- |
0 |
|
N/A |
| 22.5(Constructions) |
- |
0 |
|
N/A |
| 22.4(Constructions) |
- |
0 |
|
N/A |
| 22.3(Constructions) |
- |
0 |
|
N/A |
| 22.2(Constructions) |
- |
0 |
|
N/A |
| 22.1(Constructions) |
- |
0 |
|
N/A |
| 21.2(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 21.1(MECHANICAL STRENGTH) |
- |
0 |
|
N/A |
| 20.2(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 20.1(Stability and mechanical hazards) |
- |
0 |
|
N/A |
| 19.101 and 19.102(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION) |
- |
0 |
|
N/A |
| 17(Overload protection of transformers and associated circuits) |
- |
0 |
|
N/A |
| 16.3(Insulation resistance test) |
- |
0 |
|
N/A |
| 16.3(Electric strength test) |
- |
0 |
|
N/A |
| 16.1 & 16.2(Leakage current test) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.102(Moisture resistance) |
- |
0 |
|
N/A |
| 15.101(Moisture resistance) |
- |
0 |
|
N/A |
| 15.3(Moisture resistance) |
- |
0 |
|
N/A |
| 15.2(Moisture resistance) |
- |
0 |
|
N/A |
| 15.1(Moisture resistance) |
- |
0 |
|
N/A |
| 14, Table No.- 6 & Table No.-16(Transient over voltages) |
- |
0 |
|
N/A |
| 13.3 and Table No.- 4(Electric strength test) |
- |
0 |
|
N/A |
| 13.1, 13.2(Leakage current test) |
- |
0 |
|
N/A |
| 11.1 to 11.8, Table No.-3(Heating) |
- |
0 |
|
N/A |
| 10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current) |
- |
0 |
|
N/A |
| 8.1.5(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.4(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.3(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 8.1, 8.1.1 & 8.2(Protection against access to live parts) |
- |
0 |
|
N/A |
| 7.14(Legibility & Durability of Markings test) |
- |
0 |
|
N/A |
| 7.1 to 7.13, 7.15, 7.16(Marking) |
- |
0 |
|
N/A |
| 19.11.4.1(Electrostatic discharges) |
- |
0 |
|
N/A |
| 19.11.4.2(Radiated fields) |
- |
0 |
|
N/A |
| 19.11.4.3(Fast transient bursts) |
- |
0 |
|
N/A |
| 19.11.4.4(Surge immunity test) |
- |
0 |
|
N/A |
| 19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
N/A |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
N/A |
| 19.11.4.7(Harmonics) |
- |
0 |
|
N/A |
|
02 Sep, 2028 |
-
1 32 (Radiation, toxicity and similar hazards) Radiation, toxicity and similar hazards Test facility not available.
2 24.1 (Components) Components Verification based on IS/IEC test report or certificates of components.
3 24.2 to 24.6 (Components) Components Verification based on IS/IEC test report or certificates of components.
4 19.11.4.1 (Electrostatic discharges) Electrostatic discharges As per IEC 61000-4-2.
5 19.11.4.2 (Radiated fields) Radiated fields As per IEC 61000-4-3.
6 19.11.4.3 (Fast transient bursts) Fast transient bursts As per IEC 61000-4-4.
7 19.11.4.4 (Surge immunity test) Surge immunity test As per IEC 61000-4-5.
8 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges As per IEC 61000-4-6.
9 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions As per IEC 61000-4-11.
10 19.11.4.7 (Harmonics) Harmonics As per IEC 61000-4-13.
11 22.13 to 22.48 (Constructions) Cl. 22.32 (Ageing test on rubber ) Oxygen Bomb Test facility Not available. |
| 875 |
TUV Rheinland (India) Private limited, Material Testing Laboratory
| 6197936
| IS 17953 (2023) |
uPVC Profiles for Windows And Doors Specification |
- |
1300000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No.5.1.1(UV Resistant Virgin Material) |
- |
1222000 |
|
Test includes exposure to weathering(8000hrs), Charpy Impact test, Color measurements, Flexural modulus of elasticity and VST. |
| Cl. No.5.1.2(Non-UV Resistant Virgin Material) |
- |
11500 |
|
Test includes Flexural modulus of elasticity and VST. |
| Cl. No.5.1.3, a), Table no. 1(i)(Monoextrusion or coextrusion of a layer of any visible surface) |
- |
5000 |
|
- |
| Cl. No.5.1.3, a), Table no. 1(ii)("Non-visible surface and
material covered by coextrusion") |
- |
5000 |
|
- |
| Cl.No.5.2(Appearance of uPVC Profile) |
- |
3500 |
|
- |
| Cl.No.5.3.1and3.2.5, Table no. 2(i)(Depth (D)) |
- |
1500 |
|
- |
| Cl.No.5.3.1and3.2.5, Table no. 2(ii)(Width (W)) |
- |
1500 |
|
- |
| Cl.No.5.3.1and3.2.5, Table no. 2(iii)("Sight visible surface
wall thickness, Max ") |
- |
1500 |
|
- |
| Cl.No.5.3.1and3.2.5, Table no. 2(iv)("Sight visible surface flatness,
Max ") |
- |
1500 |
|
- |
| Cl.No.5.3.1and3.2.5, Table no. 2(v)(Parallelism, Max) |
- |
1500 |
|
- |
| Cl.No.5.3.2(Wall Thickness of Main Profiles) |
- |
1500 |
|
- |
| Cl.No.5.3.3(Tolerances on other Dimensions) |
- |
500 |
|
- |
| Cl.No.5.3.4(Straightness) |
- |
1500 |
|
- |
| Cl.No.5.4(Mass of Profile) |
- |
2500 |
|
- |
| Cl.No.5.5("Heat Reversion
") |
- |
10000 |
|
- |
| Cl.No.5.6(Resistance to Impact of Falling Mass) |
- |
7500 |
|
- |
| Cl.No.5.7(Heat Ageing) |
- |
5000 |
|
- |
| Cl.No.5.8.1(Tensile Bending Test) |
- |
10000 |
|
- |
| Cl.No.5.8.2(Compression Bending Test) |
- |
10000 |
|
- |
| Cl.No.5.9.(Charpy Impact Resistance of Main Profile) |
- |
7500 |
|
- |
| Cl.No.5.10.(Resistance to Weathering) |
- |
1210000 |
|
- |
| Cl.No.5.11(Density) |
- |
3000 |
|
- |
| Cl.No.8(Marking) |
- |
1000 |
|
- |
|
02 Apr, 2029 |
-
- |
| 876 |
Atmy Analytical Labs Private Limited (Unit-2), Greater Noida
| 8176106
| IS 12933 (Part 2) (2025) |
Solar Flat Plate Collector - Specification Part 2 Components (Third Revision) |
All |
14900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(Material (cover plate)) |
- |
2000 |
|
- |
| Cl-5.1(Transmittance Test) |
- |
2000 |
|
- |
| Cl-5.1.2(cover glass of the solar collector) |
- |
500 |
|
- |
| Cl-5.1.3(Global solar radiation) |
- |
500 |
|
- |
| Cl-6(Material (Collector Box)) |
- |
500 |
|
- |
| Cl-6.1 (a)(Aluminum alloy) |
- |
500 |
|
- |
| Cl-6.1 (b)(Fibre glass) |
- |
500 |
|
- |
| Cl-6.1 (c)(CRCA steel) |
- |
500 |
|
- |
| Cl-6.1 (d)(Galvanized steel sheets) |
- |
500 |
|
- |
| Cl-6.1 (e)(continuously pre-painted galvanized steel) |
- |
500 |
|
- |
| Cl-6.1 (f)(HRC steel sheets) |
- |
500 |
|
- |
| Cl-6.2(Minimum thickness) |
- |
500 |
|
- |
| Cl-7(Workmanship and Finish) |
- |
2000 |
|
- |
| Cl-7.3(Resistance to Abrasion) |
- |
2000 |
|
- |
| Cl-8(Fabrication) |
- |
1000 |
|
- |
| Cl-9(Absorber) |
- |
1000 |
|
- |
| Cl-9.1.4(Temperature Test) |
- |
1500 |
|
- |
| Cl-9.2.1(Static Pressure Leakage Test) |
- |
2000 |
|
- |
| Cl-9.2.2(Bonding between Riser and Sheet) |
- |
1000 |
|
- |
| Cl-10(Back and Side Insulation) |
- |
1000 |
|
- |
| Cl-11(Material (Gaskets and Grommets)) |
- |
1000 |
|
- |
| Cl-12.1.1(Thermal Shock Test) |
- |
2000 |
|
- |
| Cl-6.1 (d)(continuously pre-painted galvanized steel) |
- |
500 |
|
- |
| Cl-6.1 (e)(HRC steel sheets) |
- |
500 |
|
- |
|
08 Feb, 2027 |
-
Included w.e.f. 17.03.2026 |
| 877 |
ATCC TEST LABS LLP
| 8172626
| IS 2141 (2000) |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(S) |
- |
1000 |
|
- |
| 4(P) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Hard Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 For 2.00 to 2.24 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.80 to 3.15 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Soft Core) |
- |
1000 |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core) |
- |
1000 |
|
- |
| 11(a) Size) |
- |
1000 |
|
- |
| 11(b) Construction) |
- |
1000 |
|
- |
| 11(c) tensile designation) |
- |
1000 |
|
- |
| 11(d) lay) |
- |
1000 |
|
- |
| 11(e) coating) |
- |
1000 |
|
- |
| 11(f) length) |
- |
1000 |
|
- |
| 11( g) mass) |
- |
1000 |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
1000 |
|
- |
| 11(i) lot number along with the order number) |
- |
1000 |
|
- |
| 11(j) BIS Standards Mark) |
- |
1000 |
|
- |
| 5(a) Grade) |
- |
1000 |
|
- |
| 5(b) Tensile Grade) |
- |
1000 |
|
- |
| 6(a) Lay) |
- |
1000 |
|
- |
| 6(b) Construction) |
- |
1000 |
|
- |
| 7(Freedom from defects) |
- |
1000 |
|
- |
| 9(a) Tensile) |
- |
1000 |
|
- |
| 9(b) Elongation) |
- |
1000 |
|
- |
| 9(c) Galvanizing Test) |
- |
1000 |
|
- |
| 11(a) Size) |
- |
1000 |
|
- |
| 11(b) Construction) |
- |
1000 |
|
- |
| 11(c) tensile designation) |
- |
1000 |
|
- |
| 11(d) lay) |
- |
1000 |
|
- |
| 11(e) coating) |
- |
1000 |
|
- |
| 11(f) length) |
- |
1000 |
|
- |
| 11( g) mass) |
- |
1000 |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
1000 |
|
- |
| 11(i) lot number along with the order number) |
- |
1000 |
|
- |
| 11(j) BIS Standards Mark) |
- |
1000 |
|
- |
| 5(a) Grade) |
- |
1000 |
|
- |
| 5(b) Tensile Grade) |
- |
1000 |
|
- |
| 6(a) Lay) |
- |
1000 |
|
- |
| 6(b) Construction) |
- |
1000 |
|
- |
| 7(Freedom from defects) |
- |
1000 |
|
- |
| 9(a) Tensile) |
- |
1000 |
|
- |
| 9(b) Elongation) |
- |
1000 |
|
- |
| 9(c) Galvanizing Test) |
- |
1000 |
|
- |
| 11(a) Size) |
- |
1000 |
|
- |
| 11(b) Construction) |
- |
1000 |
|
- |
| 11(c) tensile designation) |
- |
1000 |
|
- |
| 11(d) lay) |
- |
1000 |
|
- |
| 11(e) coating) |
- |
1000 |
|
- |
| 11(f) length) |
- |
1000 |
|
- |
| 11( g) mass) |
- |
1000 |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
1000 |
|
- |
| 11(i) lot number along with the order number) |
- |
1000 |
|
- |
| 11(j) BIS Standards Mark) |
- |
1000 |
|
- |
| 5(a) Grade) |
- |
1000 |
|
- |
| 5(b) Tensile Grade) |
- |
1000 |
|
- |
| 6(a) Lay) |
- |
1000 |
|
- |
| 6(b) Construction) |
- |
1000 |
|
- |
| 7(Freedom from defects) |
- |
1000 |
|
- |
| 9(a) Tensile) |
- |
1000 |
|
- |
| 9(b) Elongation) |
- |
1000 |
|
- |
| 9(c) Galvanizing Test) |
- |
1000 |
|
- |
| CL 8.2(AVG single wire dia (08)) |
- |
1000 |
|
- |
| CL 8.2(AVG strand wire dia (08)) |
- |
1000 |
|
- |
| 4(S) |
- |
- |
|
- |
| 4(P) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Hard Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 For 2.00 to 2.24 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.80 to 3.15 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Soft Core) |
- |
- |
|
- |
| 9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core) |
- |
- |
|
- |
| 11(a) Size) |
- |
- |
|
- |
| 11(b) Construction) |
- |
- |
|
- |
| 11(c) tensile designation) |
- |
- |
|
- |
| 11(d) lay) |
- |
- |
|
- |
| 11(e) coating) |
- |
- |
|
- |
| 11(f) length) |
- |
- |
|
- |
| 11( g) mass) |
- |
- |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
- |
|
- |
| 11(i) lot number along with the order number) |
- |
- |
|
- |
| 11(j) BIS Standards Mark) |
- |
- |
|
- |
| 5(a) Grade) |
- |
- |
|
- |
| 5(b) Tensile Grade) |
- |
- |
|
- |
| 6(a) Lay) |
- |
- |
|
- |
| 6(b) Construction) |
- |
- |
|
- |
| 7(Freedom from defects) |
- |
- |
|
- |
| 9(a) Tensile) |
- |
- |
|
- |
| 9(b) Elongation) |
- |
- |
|
- |
| 9(c) Galvanizing Test) |
- |
- |
|
- |
| 11(a) Size) |
- |
- |
|
- |
| 11(b) Construction) |
- |
- |
|
- |
| 11(c) tensile designation) |
- |
- |
|
- |
| 11(d) lay) |
- |
- |
|
- |
| 11(e) coating) |
- |
- |
|
- |
| 11(f) length) |
- |
- |
|
- |
| 11( g) mass) |
- |
- |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
- |
|
- |
| 11(i) lot number along with the order number) |
- |
- |
|
- |
| 11(j) BIS Standards Mark) |
- |
- |
|
- |
| 5(a) Grade) |
- |
- |
|
- |
| 5(b) Tensile Grade) |
- |
- |
|
- |
| 6(a) Lay) |
- |
- |
|
- |
| 6(b) Construction) |
- |
- |
|
- |
| 7(Freedom from defects) |
- |
- |
|
- |
| 9(a) Tensile) |
- |
- |
|
- |
| 9(b) Elongation) |
- |
- |
|
- |
| 9(c) Galvanizing Test) |
- |
- |
|
- |
| 11(a) Size) |
- |
- |
|
- |
| 11(b) Construction) |
- |
- |
|
- |
| 11(c) tensile designation) |
- |
- |
|
- |
| 11(d) lay) |
- |
- |
|
- |
| 11(e) coating) |
- |
- |
|
- |
| 11(f) length) |
- |
- |
|
- |
| 11( g) mass) |
- |
- |
|
- |
| 11(h) manufacturer's name or trade mark) |
- |
- |
|
- |
| 11(i) lot number along with the order number) |
- |
- |
|
- |
| 11(j) BIS Standards Mark) |
- |
- |
|
- |
| 5(a) Grade) |
- |
- |
|
- |
| 5(b) Tensile Grade) |
- |
- |
|
- |
| 6(a) Lay) |
- |
- |
|
- |
| 6(b) Construction) |
- |
- |
|
- |
| 7(Freedom from defects) |
- |
- |
|
- |
| 9(a) Tensile) |
- |
- |
|
- |
| 9(b) Elongation) |
- |
- |
|
- |
| 9(c) Galvanizing Test) |
- |
- |
|
- |
| CL 8.2(AVG single wire dia (08)) |
- |
- |
|
- |
| CL 8.2(AVG strand wire dia (08)) |
- |
- |
|
- |
|
15 Jun, 2026 |
-
Included w.e.f 24.02.2026 |
| 878 |
Aaditech Test and Calibration Lab LLP
| 8179926
| IS 8887 (2018) |
Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision) |
All |
14050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl: 3.1(Cationic Emulsion for all grade) |
- |
200 |
|
- |
| CL: 4.4.1(Material For all grades) |
- |
200 |
|
- |
| CL: 4.4.2(Material For all grades) |
- |
200 |
|
- |
| 6.6.1(Requirement for all grades) |
- |
200 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad MS) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2, IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-2), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad MS), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-1), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-2), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-2), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade MS), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-1), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-2), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-2), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad MS), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-1), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-2), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade MS) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade MS) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade MS) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade MS) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-1) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-2) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade MS) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-1) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-2) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-2) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade MS) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-1) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-2) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-1) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-2) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade MS) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-1) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-2) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-1) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-2) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade MS) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-1) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-2) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-1) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-2) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade MS) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-1) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-2) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-1) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-2) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade MS) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-1) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-2) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-1)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-2)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade MS)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-1)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-2)) |
- |
750 |
|
- |
| Cl: 3.1(Cationic Emulsion for all grade) |
- |
200 |
|
- |
| CL: 4.4.1(Material For all grades) |
- |
200 |
|
- |
| CL: 4.4.2(Material For all grades) |
- |
200 |
|
- |
| 6.6.1(Requirement for all grades) |
- |
200 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad MS) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2, IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
800 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-2), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad MS), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-1), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-2), Annex C) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-2), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade MS), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-1), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-2), Annex D) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-2), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad MS), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-1), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-2), Annex E) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade MS) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade MS) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade MS) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-2) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade MS) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-1) Annex F) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-2) Annex F) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-2) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade MS) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-1) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-2) Annex G) |
- |
1500 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-2) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade MS) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-1) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-2) Annex H) |
- |
1000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-1) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-2) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade MS) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-1) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-2) Annex J) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-1) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-2) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade MS) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-1) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-2) IS 1203) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-1) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-2) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade MS) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-1) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-2) IS 1208) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-1) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-2) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade MS) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-1) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-2) IS 1216) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
2000 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-1)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-2)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade MS)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-1)) |
- |
750 |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-2)) |
- |
750 |
|
- |
| xi, Table-1(Water content) |
- |
750 |
|
- |
| 4.1(Materials) |
- |
200 |
|
- |
| 6.2-Table 1-i)(Residue on 600 micron IS Sieve, percent by mass, Max) |
- |
1000 |
|
- |
| 6.2-Table 1-ii)(Viscosity by saybolt furol viscometer, seconds
1) At 25°C
2) At 50°C) |
- |
800 |
|
- |
| 6.2-Table 1-iii)(Coagulation of emulsion at low temperature1)) |
- |
1000 |
|
- |
| 6.2-Table 1-iv)(Storage stability after 24 h, percent, Max) |
- |
1000 |
|
- |
| 6.2-Table 1-v)(Particle charge) |
- |
2000 |
|
- |
| 6.2-Table 1-vi)(Coating ability and water resistance:
1) Coating, dry aggregate
2) Coating, after spraying
3) Coating, wet aggregate
4) Coating, after spraying) |
- |
1500 |
|
- |
| 6.2-Table 1-vii)(Stability to mixing with cement (% coagulation), Max) |
- |
1500 |
|
- |
| 6.2-Table 1-viii)(Miscibility with water) |
- |
1000 |
|
- |
| 6.2-Table 1-ix)(Tests on residue:
1) Residue by evaporation, percent, Min
2) Penetration 25°C/100g/5 sec
3) Ductility 27°C/cm, Min
4) Solubility I tricholoethylne, percent by
mass, Min) |
- |
2000 |
|
- |
| 6.2-Table 1-x)(Distillation in percent volume of distillate recovered at 360°C at
1) 190°C
2) 225°C
3) 260°C
4) 316°C
5) Residue at 360°C, percent, Min) |
- |
2000 |
|
- |
| 6.2-Table 1-xi)(Water content, percent by mass, Max) |
- |
750 |
|
- |
| 8(Marking) |
- |
300 |
|
- |
| Cl: 3.1(Cationic Emulsion for all grade) |
- |
- |
|
- |
| CL: 4.4.1(Material For all grades) |
- |
- |
|
- |
| CL: 4.4.2(Material For all grades) |
- |
- |
|
- |
| 6.6.1(Requirement for all grades) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad MS) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2, IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-2), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad MS), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-1), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-2), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-2), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade MS), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-1), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-2), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-2), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad MS), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-1), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-2), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-2) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade MS) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-1) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-2) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-2) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade MS) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-1) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-2) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-1) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-2) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade MS) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-1) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-2) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-1) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-2) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade MS) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-1) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-2) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-1) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-2) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade MS) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-1) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-2) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-1) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-2) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade MS) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-1) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-2) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-2)) |
- |
- |
|
- |
| Cl: 3.1(Cationic Emulsion for all grade) |
- |
- |
|
- |
| CL: 4.4.1(Material For all grades) |
- |
- |
|
- |
| CL: 4.4.2(Material For all grades) |
- |
- |
|
- |
| 6.6.1(Requirement for all grades) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad MS) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad RS-2, IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad MS), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-1), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ii) (2)(Viscosity by saybolt furol viscometer, seconds (Grad SS-2), IS 3117) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-2), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad MS), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-1), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad SS-2), Annex C) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-2), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade MS), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-1), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grade SS-2), Annex D) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-2), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad MS), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-1), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad SS-2), Annex E) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 2(Coating ability and water resistance:
Coating, after spraying (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 3(Coating ability and water resistance:
Coating, wet aggregate (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade RS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade MS) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-1) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vi) 4(Coating ability and water resistance:
Coating, After Spraying (Grade SS-2) Annex F) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-2) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade MS) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-1) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade SS-2) Annex G) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-2) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade MS) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-1) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade SS-2) Annex H) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-1) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade RS-2) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade MS) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-1) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 1(Tests on residue: Residue by evaporation (Grade SS-2) Annex J) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-1) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade RS-2) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade MS) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-1) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 2(Tests on residue: Penetration (Grade SS-2) IS 1203) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-1) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade RS-2) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade MS) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-1) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 3(Tests on residue: Ductility (Grade SS-2) IS 1208) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-1) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade RS-2) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade MS) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-1) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(ix) 4(Tests on residue: Solubility I tricholoethylne,
(Grade SS-2) IS 1216) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 1(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 2(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 3(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 4(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(x) 5(Distillation in percent volume of distillate recovered at 360°C (Grade SS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade RS-2)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade MS)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-1)) |
- |
- |
|
- |
| 6.6.2 Table-1; 1(xi)(Water content (Grade SS-2)) |
- |
- |
|
- |
| xi, Table-1(Water content) |
- |
- |
|
- |
| 4.1(Materials) |
- |
- |
|
- |
| 6.2-Table 1-i)(Residue on 600 micron IS Sieve, percent by mass, Max) |
- |
- |
|
- |
| 6.2-Table 1-ii)(Viscosity by saybolt furol viscometer, seconds
1) At 25°C
2) At 50°C) |
- |
- |
|
- |
| 6.2-Table 1-iii)(Coagulation of emulsion at low temperature1)) |
- |
- |
|
- |
| 6.2-Table 1-iv)(Storage stability after 24 h, percent, Max) |
- |
- |
|
- |
| 6.2-Table 1-v)(Particle charge) |
- |
- |
|
- |
| 6.2-Table 1-vi)(Coating ability and water resistance:
1) Coating, dry aggregate
2) Coating, after spraying
3) Coating, wet aggregate
4) Coating, after spraying) |
- |
- |
|
- |
| 6.2-Table 1-vii)(Stability to mixing with cement (% coagulation), Max) |
- |
- |
|
- |
| 6.2-Table 1-viii)(Miscibility with water) |
- |
- |
|
- |
| 6.2-Table 1-ix)(Tests on residue:
1) Residue by evaporation, percent, Min
2) Penetration 25°C/100g/5 sec
3) Ductility 27°C/cm, Min
4) Solubility I tricholoethylne, percent by
mass, Min) |
- |
- |
|
- |
| 6.2-Table 1-x)(Distillation in percent volume of distillate recovered at 360°C at
1) 190°C
2) 225°C
3) 260°C
4) 316°C
5) Residue at 360°C, percent, Min) |
- |
- |
|
- |
| 6.2-Table 1-xi)(Water content, percent by mass, Max) |
- |
- |
|
- |
| 8(Marking) |
- |
- |
|
- |
|
- |
-
Included w.e.f 17.02.2026 |
| 879 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 7834 : Part 5 (1987) |
Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| table 1 sl.no: 01(16 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 02(20 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 03(25 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 04(32 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 05(40 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 06(50 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 07(63 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 08(75 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 09(90 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 10(110 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 11(125 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 12(140 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 13(160(z)) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 01(16 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 02(20 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 03(25 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 04(32 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 05(40 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 06(50 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 07(63 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 08(75 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 09(90 (Z)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 10(110 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 11(125 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 12(140 (Z1)
) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| table 1 sl.no: 13(160(z1)) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.1(General) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2(Manufacture) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(Size) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(45 ̊ Tees Laying
Length, Z) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(45 ̊ Tees Laying
Length, Z1) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.3(Socket length) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.1(General) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2(Manufacture) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(Size) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(45 ̊ Tees Laying
Length, Z) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2, Table 1(45 ̊ Tees Laying
Length, Z1) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.3(Socket length) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 6.1.1(VCM Content Test) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2 table 1(Laying length) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 6.1.1(VCM Content Test) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
| 2.2.2 table 1(Laying length) |
- |
0 |
|
COMPLETE TESTING CHARGE RS 8000/- |
|
17 Mar, 2028 |
-
Included w.e.f 17.03.2026 |
| 880 |
Modern Test Center, Berhampur
| 5123116
| IS 10500 (2012) |
Drinking water - Specification (Second Revision) |
All Type |
4000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4, table 4, i, b)(Beta emitters) |
- |
2000 |
|
Not Applicable |
| 4, table 4, i, a)(Alpha emitters) |
- |
2000 |
|
Not Applicable |
| Table 3, x)(Uranium) |
- |
1000 |
|
Not Applicable |
| 4, Table (4), (i), (b)(Beta emitters Bq/l, Max) |
- |
2000 |
|
Not Applicable |
|
31 May, 2029 |
-
- |
| 881 |
CIPET:CSTS Amritsar
| 9120034
| IS 13664 (1993) |
Poly - Pallets for bag storage godowns - Specification |
Poly - Pallets for bag storage godowns (Type-A) |
24300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Table-1)(Nominal Assembly Dimensions) |
- |
500 |
|
- |
| 5.3(Dimensions and Cross Sectional Details of Members) |
- |
1000 |
|
- |
| 7(Material Identification) |
- |
2000 |
|
- |
| 8.1(Type) |
- |
500 |
|
- |
| 8.2(Stability) |
- |
0 |
|
- |
| 8.3(Assembly) |
- |
0 |
|
- |
| 8.5(End Plugs) |
- |
0 |
|
- |
| 8.6(Weight) |
- |
500 |
|
- |
| 9.1.1 Table-2(Axial Crushing load) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.1 Table-2(Cross Sectional crushing load) |
- |
1100 |
|
- |
| 9.1.1 Table-2(Ultimate bending load) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Shear Strength) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Ultimate tensile strength & Elongation) |
- |
1800 |
|
1300+500 (Specimen) |
| 9.1.2 Table-3(Impact Strength) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Thermal Stability) |
- |
700 |
|
- |
| 9.1.2 Table-3(Water absorpation) |
- |
600 |
|
- |
| 9.1.2 Table-3(Chemical Resistance) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Bent Strength at yield) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Compressive strength at 10% deformation) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.3.1(Corner Drop Test) |
- |
1100 |
|
- |
| 8.4(Fastening) |
- |
0 |
|
- |
| 5.1 (Table-1)(Nominal Assembly Dimensions) |
- |
500 |
|
- |
| 5.3(Dimensions and Cross Sectional Details of Members) |
- |
1000 |
|
- |
| 7(Material Identification) |
- |
2000 |
|
- |
| 8.1(Type) |
- |
500 |
|
- |
| 8.2(Stability) |
- |
0 |
|
- |
| 8.3(Assembly) |
- |
0 |
|
- |
| 8.5(End Plugs) |
- |
0 |
|
- |
| 8.6(Weight) |
- |
500 |
|
- |
| 9.1.1 Table-2(Axial Crushing load) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.1 Table-2(Cross Sectional crushing load) |
- |
1100 |
|
- |
| 9.1.1 Table-2(Ultimate bending load) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Shear Strength) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Ultimate tensile strength & Elongation) |
- |
1800 |
|
1300+500 (Specimen) |
| 9.1.2 Table-3(Impact Strength) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Thermal Stability) |
- |
700 |
|
- |
| 9.1.2 Table-3(Water absorpation) |
- |
600 |
|
- |
| 9.1.2 Table-3(Chemical Resistance) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Bent Strength at yield) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.2 Table-3(Compressive strength at 10% deformation) |
- |
1600 |
|
1100+500 (Specimen) |
| 9.1.3.1(Corner Drop Test) |
- |
1100 |
|
- |
| 8.4(Fastening) |
- |
0 |
|
- |
|
06 Jan, 2027 |
-
- |
| 882 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 6721 (2023) |
SANDAL AND SLIPPERS SPECIFICATION First revision |
- |
8800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No.4(SHAPE AND DESIGN) |
- |
0 |
|
- |
| Cl. No.5("SIZE AND FITTINGS
") |
- |
0 |
|
- |
| Cl. No.6("CONSTRUCTION
") |
- |
0 |
|
- |
| Cl. No.7(MATERIAL) |
- |
0 |
|
- |
| Cl. No.8.1, Table no. 1(i),a("Tear strength, (other
than moulded upper material)
") |
- |
300 |
|
- |
| Cl. No.8.1, Table no. 1(i),b("For all moulded upper material
") |
- |
0 |
|
- |
| Cl. No.8.1, Table no. 1(ii)(Flexing endurance) |
- |
400 |
|
- |
| Cl. No.8.2,Table no. 2(i)(Tear strength) |
- |
300 |
|
- |
| Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance-
At dry condition") |
- |
500 |
|
- |
| Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance-
At wet condition") |
- |
0 |
|
- |
| Cl. No.8.3,Table no. 3(i)(Tear strength) |
- |
300 |
|
- |
| Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance-
At dry condition") |
- |
500 |
|
- |
| Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance-
At wet condition") |
- |
0 |
|
- |
| Cl. No.8.4,Table no. 4(i)(Grain crack index) |
- |
300 |
|
- |
| Cl. No.8.4,Table no. 4(ii)(Density) |
- |
200 |
|
- |
| Cl. No.8.4,Table no. 4(iii)(Abrasion resistance) |
- |
300 |
|
- |
| Cl. No.8.4,Table no. 5(i)(Density) |
- |
200 |
|
- |
| Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume
loss ") |
- |
300 |
|
- |
| Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000
flexes") |
- |
400 |
|
- |
| Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min
(Applicable when fore part is fully covered or strap
width is more than 25 mm)") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min
(Applicable if toe post is present)") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min
(Applicable if toe ring is not integral part of upper") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength) |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and
Buckle/D-ring ") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful
extension, percent") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N,
Min (If, present)") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance,
Cut growth after 150 000 flexes, mm, Max
(Applicable for PU sole only)") |
- |
600 |
|
- |
| Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min
(Applicable for heel height 40 mm and above
attached separately to the sandal/slipper)") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm,
(Applicable for multi-layer sole)") |
- |
300 |
|
- |
| Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF)
(Not applicable for leather sole)
(To be carried out on quarry tiles)") |
- |
900 |
|
- |
| Cl. No.8.6.2(Lead content) |
- |
200 |
|
- |
| Cl. No.9.(MARKING AND PACKING) |
- |
0 |
|
- |
| Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI)) |
- |
300 |
|
- |
| Cl. No.8.6.1,Table 1 of IS 17011(x)(pH) |
- |
100 |
|
- |
| Cl-5 ((Amendment No-1)(Category And Type) |
- |
100 |
|
- |
| Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min) |
- |
600 |
|
- |
| Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance) |
- |
2000 |
|
- |
| Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength) |
- |
500 |
|
- |
| Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength) |
- |
600 |
|
- |
| Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3) |
- |
1200 |
|
- |
| Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max) |
- |
800 |
|
- |
| Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or
Bennewart flex method)") |
- |
600 |
|
- |
| Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm) |
- |
400 |
|
- |
| Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material) |
- |
500 |
|
- |
| Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material) |
- |
500 |
|
- |
| Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance) |
- |
600 |
|
- |
| Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min) |
- |
500 |
|
- |
| Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance
(a) dry condition
(b) wet condition") |
- |
700 |
|
- |
| Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min) |
- |
500 |
|
- |
| Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance
(a) dry condition
(b) wet condition") |
- |
700 |
|
- |
| Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min) |
- |
400 |
|
- |
| Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min
(a)-Cellular, (b) Solid
") |
- |
400 |
|
- |
| Cl-10 (Amendment No-1)(Marking) |
- |
100 |
|
- |
| Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index) |
- |
400 |
|
- |
| Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 883 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 17043 : Part 1 (2024) |
Shoes - Specification Part 1 Shoes for Services |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.2(Design) |
- |
0 |
|
- |
| Cl-4.3.1(Size) |
- |
100 |
|
- |
| Cl-4.3.2(Weight) |
- |
100 |
|
- |
| Cl-4.4(Height of Upper) |
- |
200 |
|
- |
| Cl-4.5, S.Cl-4.5.2(Ergonomic Feature) |
- |
100 |
|
- |
| Cl-4.5, S.Cl-4.5.3(Bond Strength) |
- |
600 |
|
- |
| Cl-4.5, S.Cl-4.5.4(Slip Resistance) |
- |
1200 |
|
- |
| Cl-4.5.5.1(Electrical Properties-Antistatic footwear) |
- |
700 |
|
- |
| Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex) |
- |
700 |
|
- |
| Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex) |
- |
800 |
|
- |
| Cl-4.6.1(Material) |
- |
100 |
|
- |
| Cl-4.6.2(Tear Strength) |
- |
500 |
|
- |
| Cl-4.6.3(Water Vapour Permeability and Coefficient) |
- |
800 |
|
- |
| Cl-4.6.4(Water Penetration and Water Absorption) |
- |
400 |
|
- |
| Cl-4.7.1(Material) |
- |
100 |
|
- |
| Cl-4.7.2(Tear Strength) |
- |
500 |
|
- |
| Cl-4.7.3(Abrasion Resistance) |
- |
800 |
|
- |
| Cl-4.7.4(Water Vapour Permeability and Coefficient) |
- |
800 |
|
- |
| Cl. 4.8.1(Material) |
- |
100 |
|
- |
| Cl-4.8.2(Abrasion Resistance) |
- |
400 |
|
- |
| Cl-4.8.3(Water Absorption and Desorption) |
- |
1200 |
|
- |
| Cl-4.9.3(Abrasion Resistance) |
- |
800 |
|
- |
| Cl-4.10(Toe Puff and Counter Stiffener) |
- |
100 |
|
- |
| Cl-4.11.1(Material) |
- |
100 |
|
- |
| Cl-4.11.2(Tear Strength) |
- |
500 |
|
- |
| Cl-4.12(Closing Thread) |
- |
400 |
|
- |
| Cl-4.13.2(Thickness) |
- |
100 |
|
- |
| Cl-4.13.3(Moulded Density) |
- |
400 |
|
- |
| Cl-4.13.4(Hardness) |
- |
400 |
|
- |
| Cl-4.13.5(Ageing Test) |
- |
500 |
|
- |
| Cl-4.13.6(Tear Strength) |
- |
500 |
|
- |
| Cl-4.13.7(Abrasion Resistance) |
- |
800 |
|
- |
| Cl-4.13.8(Flexing Resistance) |
- |
600 |
|
- |
| Cl-4.14(Eyelet) |
- |
500 |
|
- |
| Cl-4.15.2(Breaking Load and Tag Retention) |
- |
500 |
|
- |
| Cl-7(Marking) |
- |
100 |
|
- |
| Cl.4.5.8(Energy Absorption of Seat Region) |
- |
600 |
|
- |
| Cl- 4.5.3.1(Upper-outsole bond strength) |
- |
600 |
|
- |
| Cl.4.5.3.2(Interlayer bond strength) |
- |
600 |
|
- |
|
31 Dec, 2026 |
-
- |
| 884 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 17043 : Part 2 (2024) |
Shoes: Shoes for General Purpose |
- |
15500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1(Shape and Design) |
- |
0 |
|
- |
| Cl-5.3(Material) |
- |
0 |
|
- |
| Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min) |
- |
600 |
|
- |
| Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min) |
- |
600 |
|
- |
| Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile)) |
- |
1200 |
|
- |
| Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min) |
- |
400 |
|
- |
| Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3) |
- |
800 |
|
- |
| Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max) |
- |
400 |
|
- |
| Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max) |
- |
2000 |
|
- |
| Cl-6.1.1, Table-2 (i)(Tear trength, N) |
- |
500 |
|
- |
| Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes) |
- |
600 |
|
- |
| Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining)) |
- |
500 |
|
- |
| Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics)) |
- |
500 |
|
- |
| Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min) |
- |
800 |
|
- |
| Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min) |
- |
500 |
|
- |
| Cl-6.1.1, Table-2 (vii)(Abrasion resistance) |
- |
800 |
|
- |
| Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min) |
- |
1000 |
|
- |
| Cl-6.1.2, Table-3 (ii)(Water resistance) |
- |
500 |
|
- |
| Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min) |
- |
500 |
|
- |
| Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min) |
- |
500 |
|
- |
| Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min) |
- |
500 |
|
- |
| Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes) |
- |
600 |
|
- |
| Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min) |
- |
800 |
|
- |
| Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance) |
- |
2000 |
|
- |
| Cl-6.1.3, Table- 4 (vii)(Abrasion resistance) |
- |
800 |
|
- |
| Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min) |
- |
1000 |
|
- |
| Cl-6.2, Table-6 (i)(Tear strength, N, Min) |
- |
500 |
|
- |
| Cl-6.2, Table-6 (ii)(Abrasion resistance) |
- |
800 |
|
- |
| Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking)) |
- |
500 |
|
- |
| Cl-6.2, Table-6 (iv)(Colour fastness to perspiration) |
- |
500 |
|
- |
| Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min) |
- |
800 |
|
- |
| Cl-6.3, Table-7 (i)(Flexing index, Min) |
- |
500 |
|
- |
| Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles) |
- |
400 |
|
- |
| Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min
Water desorption, percent, Min) |
- |
600 |
|
- |
| Cl-6.4, Table-8 (i)(Thickness, mm, Min) |
- |
100 |
|
- |
| Cl-6.4, Table-8 (ii)(Abrasion resistance) |
- |
800 |
|
- |
| Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min
Water desorption, percent, Min) |
- |
600 |
|
- |
| Cl-6.5.1, , Table-9 (i)(Flexing resistance) |
- |
600 |
|
- |
| Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max) |
- |
2000 |
|
- |
| Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max) |
- |
400 |
|
- |
| Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method)) |
- |
0 |
|
- |
| Cl-6.5.2.3, Table-12 (i)(Hardness, Min) |
- |
400 |
|
- |
| Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max) |
- |
400 |
|
- |
| Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max) |
- |
800 |
|
- |
| Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min) |
- |
600 |
|
- |
| Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max) |
- |
400 |
|
- |
| Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min) |
- |
500 |
|
- |
| Cl-6.6, Table-13 (iii)(Compression set, percent, Max) |
- |
400 |
|
- |
| Cl-6.7, Table-14 (i)(Hardness, N) |
- |
500 |
|
- |
| Cl-6.7, Table-14 (ii)(Resilience, percent) |
- |
600 |
|
- |
| Cl-6.7, Table-14 (iii)(Moisture resistance, percent) |
- |
700 |
|
- |
| Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min) |
- |
500 |
|
- |
| Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min) |
- |
500 |
|
- |
| Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles) |
- |
600 |
|
- |
| Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min) |
- |
500 |
|
- |
| Cl-6.10, Table-17 (v)(Corrosion resistance) |
- |
400 |
|
- |
| Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min) |
- |
700 |
|
- |
| Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min) |
- |
500 |
|
- |
| Cl-6.11, Table-18 (iii)(Lateral load, N, Min) |
- |
500 |
|
- |
| Cl-6.11, Table-18 (iv)(End attachment strength, N, Min) |
- |
500 |
|
- |
| Cl-8.1(Marking) |
- |
100 |
|
- |
| Cl-6.7, Table-14 (iv)(Area shape retention, percent
(a) Initial, Min
b) After 10 collapsing load, Min) |
- |
600 |
|
- |
| Cl-6.7, Table-14 (v)(Adhesion strength, N/mm) |
- |
600 |
|
- |
| Cl-6.8, Table-15 (i)(Peel strength, N/mm
a) Initial, Min
b) After 5 000 wear cycles, Min) |
- |
800 |
|
- |
| Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa
b) Initial, Min) |
- |
800 |
|
- |
| Cl- 6.9, Table-16 (i)(Limit of useful extension, percent,
Min) |
- |
500 |
|
- |
| Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min) |
- |
500 |
|
- |
| Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes) |
- |
1000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 885 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 10702 (2023) |
Hawai Chappal-Specification |
- |
4100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Material) |
- |
0 |
|
OK |
| 4.2(Length) |
- |
0 |
|
OK |
| 4.4 , Table No. 1 , i)(Density) |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , ii)(2Compression set at constant stress) |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , iii)(3Split tear strength) |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material,
Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber") |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , v)(5Abrasion resistance at applied force) |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes) |
- |
300 |
|
OK |
| 4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes) |
- |
300 |
|
OK |
| 4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap) |
- |
300 |
|
OK |
| 4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and
Toe portion to strap , Elongation at break") |
- |
300 |
|
OK |
| 4.4 , Table No . 2 , iii)(Minimum cross section of the stud) |
- |
0 |
|
OK |
| 4.4 , Table No . 2 , iv)(Stud bolt) |
- |
0 |
|
OK |
| 4.4 , Table No . 3 , i)(Toe post attachment strength) |
- |
300 |
|
OK |
| 4.4 , Table No . 3 , iii)(Inter layer bond strength) |
- |
300 |
|
OK |
| 5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL) |
- |
0 |
|
OK |
| 6(MARKING AND PACKING) |
- |
0 |
|
OK |
| Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU)) |
- |
0 |
|
OK |
| Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds) |
- |
0 |
|
OK |
| Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate)) |
- |
0 |
|
OK |
| Cl.No. 5.2(lead content) |
- |
400 |
|
OK |
| 4.4 , Table No . 3 , ii)(Attachment strength of rear strap) |
- |
300 |
|
OK |
| 4.3(Thickness) |
- |
100 |
|
OK |
| Cl-4 ((Amendment No-1)(Category And Type) |
- |
0 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress) |
- |
400 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength) |
- |
500 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max
") |
- |
400 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max) |
- |
400 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force) |
- |
800 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,) |
- |
600 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth) |
- |
2000 |
|
OK |
| Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb),
ppm, Max") |
- |
400 |
|
OK |
| Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap
1-Solid strap
2-Cellular strap") |
- |
500 |
|
OK |
| Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap
1-Solid strap
2-Cellular strap") |
- |
500 |
|
OK |
| Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min
1-Solid strap
2-Cellular strap") |
- |
500 |
|
OK |
| Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max) |
- |
400 |
|
OK |
| Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength) |
- |
500 |
|
OK |
| Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap) |
- |
500 |
|
OK |
| Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength) |
- |
600 |
|
OK |
| Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022) |
- |
400 |
|
OK |
| Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only)
- IS 12240 (Part 5) : 1988") |
- |
400 |
|
OK |
|
31 Dec, 2026 |
-
- |
| 886 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 15844 : Part 1 (2023) |
SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision |
- |
16800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl No.4.1(Sampling and Conditioning) |
- |
0 |
|
- |
| Cl No.4.2(Construction) |
- |
0 |
|
- |
| Cl No.4.3(Whole Footwear) |
- |
0 |
|
- |
| 4.3.1(Insole) |
- |
0 |
|
- |
| 4.3.2(Toe spring height) |
- |
0 |
|
- |
| 4.3.3(Upper to Mid Sole/Out Sole Bond Performance) |
- |
0 |
|
- |
| 4.3.4("Upper to Composite Sole Bond Performance
(Applicable Only When the Sole is Composite)") |
- |
0 |
|
- |
| 4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance) |
- |
0 |
|
- |
| 4.3.6(Energy Absorption at Seat Region) |
- |
0 |
|
- |
| 4.3.7(Complete Shoe Flexing) |
- |
0 |
|
- |
| 4.3.9(Slip Resistance) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min ,
Dry: (rubbing) Rating: (Marring and staining) ") |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min ,
Wet: (rubbing) Rating: (Marring and staining)") |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate,
Min Rating: (Marring)") |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min
") |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance) |
- |
0 |
|
- |
| Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min) |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min) |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles) |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale
rate with 10 rubs on dry or wet, Min") |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method)
Grey scale rate, Min") |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min) |
- |
0 |
|
- |
| Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min
") |
- |
0 |
|
- |
| Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min) |
- |
0 |
|
- |
| Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min) |
- |
0 |
|
- |
| Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles) |
- |
0 |
|
- |
| Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min) |
- |
0 |
|
- |
| Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min) |
- |
0 |
|
- |
| Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min) |
- |
0 |
|
- |
| Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles) |
- |
0 |
|
- |
| Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min) |
- |
0 |
|
- |
| Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min) |
- |
0 |
|
- |
| Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max) |
- |
0 |
|
- |
| Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel
or
Bennewart method, cut growth, Max") |
- |
0 |
|
- |
| Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000
flexes, in mm, Max") |
- |
0 |
|
- |
| Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max) |
- |
0 |
|
- |
| Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min) |
- |
0 |
|
- |
| Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max) |
- |
0 |
|
- |
| Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min) |
- |
0 |
|
- |
| Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min) |
- |
0 |
|
- |
| Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min) |
- |
0 |
|
- |
| Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min) |
- |
0 |
|
- |
| Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min) |
- |
0 |
|
- |
| Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min) |
- |
0 |
|
- |
| Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min) |
- |
0 |
|
- |
| Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min) |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min) |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min) |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,) |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water
Gray Scale Rate, Min Rating") |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min) |
- |
0 |
|
- |
| Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance) |
- |
0 |
|
- |
| Cl No . 5(MARKING AND PACKING) |
- |
0 |
|
- |
| Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI)) |
- |
0 |
|
- |
| Cl No . 4.14, Table no. 1 of IS 17011(x)(pH) |
- |
0 |
|
- |
| Clause 4.2 - 4.2.1(Construction) |
- |
0 |
|
- |
| Clause 4.2 - 4.2.2(Construction) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.1(Whole Footwear) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.2(Whole Footwear) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite)) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond) |
- |
0 |
|
- |
| Clause 4.3 - 4.3.7(Complete Shoe Flexing) |
- |
0 |
|
- |
| Clause 4.4, Table 1 ii)(Tear strength) |
- |
0 |
|
- |
| Clause 4.4, Table 1 iv)-a(Water Vapour Permeability) |
- |
0 |
|
- |
| Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
| Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole)) |
- |
0 |
|
- |
| Clause 4.4, Table 2 i)(Breaking Strength) |
- |
0 |
|
- |
| Clause 4.4, Table 2 ii)(Elongation at break) |
- |
0 |
|
- |
| Clause 4.4, Table 2 iii)(Tear strength) |
- |
0 |
|
- |
| Clause 4.4, Table 2 v)-a(Water Vapour Permeability) |
- |
0 |
|
- |
| Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
| Clause 4.5, Table 3 i)(Tear strength) |
- |
0 |
|
- |
| Clause 4.5, Table 3 ii)(Abrasion Resistance) |
- |
0 |
|
- |
| Clause 4.5, Table 3 v)-a(Water Vapour Permeability) |
- |
0 |
|
- |
| Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient) |
- |
0 |
|
- |
| Clause 4.6, Table 4 i)(Thickness) |
- |
0 |
|
- |
| Clause 4.7, Table 5 ii)(Abrasion Resistance) |
- |
0 |
|
- |
| Clause 4.7, Table 5 iii)-a(Water Absorption) |
- |
0 |
|
- |
| Clause 4.7, Table 5 iii)-b(Water Desorption) |
- |
0 |
|
- |
| Clause 4.8, Table 6 i)(Abrasion Resistance) |
- |
0 |
|
- |
| Clause 4.8, Table 6 ii)(Flexing Resistance) |
- |
0 |
|
- |
| Clause 4.8, Table 6 iii)(Hydrolysis Resistance) |
- |
0 |
|
- |
| Clause 4.9, Table 7 ii)(Split Tear strength) |
- |
0 |
|
- |
| Clause 4.9, Table 7 iii)(Heat shrinkage) |
- |
0 |
|
- |
| Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole) |
- |
100 |
|
- |
| Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height) |
- |
200 |
|
- |
| Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance
(a) Upper to sole/mid sole/composite sole
(b) Interlayer bond strength") |
- |
600 |
|
- |
| Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region) |
- |
600 |
|
- |
| Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing) |
- |
1000 |
|
- |
| Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),) |
- |
1200 |
|
- |
| Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance
a-Cellular sole
b-Solid sole") |
- |
800 |
|
- |
| Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance) |
- |
2000 |
|
- |
| Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content) |
- |
400 |
|
- |
| Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength) |
- |
500 |
|
- |
| Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing
a-Dry: (rubbing)
b-Wet: (rubbing)") |
- |
500 |
|
- |
| Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability) |
- |
800 |
|
- |
| Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient) |
- |
800 |
|
- |
| Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength) |
- |
500 |
|
- |
| Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,) |
- |
700 |
|
- |
| Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min) |
- |
500 |
|
- |
| Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break
a-Tighter direction
b-Stretch direction") |
- |
500 |
|
- |
| Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min
a) For fabric
b) For all other materials") |
- |
500 |
|
- |
| Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance
a- Dry condition
b-Wet condition") |
- |
600 |
|
- |
| Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability) |
- |
800 |
|
- |
| Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient) |
- |
800 |
|
- |
| Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance) |
- |
2000 |
|
- |
| Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength) |
- |
500 |
|
- |
| Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min) |
- |
500 |
|
- |
| Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles
a- Dry condition
b-Wet condition") |
- |
700 |
|
- |
| Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min) |
- |
500 |
|
- |
| Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration) |
- |
500 |
|
- |
| Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability) |
- |
800 |
|
- |
| Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient) |
- |
800 |
|
- |
| Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min) |
- |
100 |
|
- |
| Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min) |
- |
400 |
|
- |
| Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,) |
- |
400 |
|
- |
| Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption) |
- |
600 |
|
- |
| Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent) |
- |
600 |
|
- |
| Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min) |
- |
250 |
|
- |
| Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles
a- Dry condition
b-Wet condition") |
- |
800 |
|
- |
| Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption) |
- |
600 |
|
- |
| Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent) |
- |
600 |
|
- |
| Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method)) |
- |
700 |
|
- |
| Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes) |
- |
2000 |
|
- |
| Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max
a) For EVA
b) For all other materials") |
- |
400 |
|
- |
| Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength) |
- |
500 |
|
- |
| Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage) |
- |
400 |
|
- |
| Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness) |
- |
600 |
|
- |
| Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent) |
- |
600 |
|
- |
| Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance) |
- |
700 |
|
- |
| Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention) |
- |
600 |
|
- |
| Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse) |
- |
600 |
|
- |
| Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength
a) Initial
b) After 5 000 wear cycles") |
- |
800 |
|
- |
| Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength
a) Initial
b) After 5 000 wear cycles") |
- |
800 |
|
- |
| Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion) |
- |
600 |
|
- |
| Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method)) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method)) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook) |
- |
500 |
|
- |
| Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance) |
- |
400 |
|
- |
| Clause 4.6, Table 4 ii)(Abrasion Resistance) |
- |
500 |
|
- |
| Clause 4.6, Table 4 iv)-a(Water Absorption) |
- |
600 |
|
- |
| Clause 4.6, Table 4 iv)-b(Water Desorption) |
- |
600 |
|
- |
| Clause 4.7, Table 5 i)(Thickness) |
- |
250 |
|
- |
|
31 Dec, 2026 |
-
- |
| 887 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 15844 : Part 2 (2023) |
SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR |
- |
18800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(SAMPLING AND CONDITIONING) |
- |
0 |
|
- |
| 5(DESIGN) |
- |
0 |
|
- |
| 6(SIZE AND FITTINGS) |
- |
0 |
|
- |
| 7.1.1(Whole Footwear) |
- |
0 |
|
- |
| 7.1.2(Upper to Mid Sole/Out Sole Bond Performance) |
- |
600 |
|
- |
| 7.1.3("Upper to Composite Sole Bond Performance
(Applicable Only When the Sole is Composite)") |
- |
600 |
|
- |
| 7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance) |
- |
600 |
|
- |
| 7.1.5(Energy Absorption at Seat Region) |
- |
600 |
|
- |
| 7.1.6(Complete Shoe Flexing) |
- |
1000 |
|
- |
| 7.1.8(Slip Resistance) |
- |
1200 |
|
- |
| 7.1.9(Heel Drop) |
- |
100 |
|
- |
| 7.2 , Table No. 2 , i)(Flexing resistance) |
- |
600 |
|
- |
| 7.2 , Table No. 2 , ii)(Tear strength (average force)) |
- |
500 |
|
- |
| 7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate
Dry: (rubbing) Rating: (Marring and staining) ") |
- |
500 |
|
- |
| 7.2 , Table No. 2 , iv) ,a)(Water vapour permeability) |
- |
800 |
|
- |
| 7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient) |
- |
800 |
|
- |
| 7.2 , Table No. 2 , v)(Stitch tear strength (double hole)) |
- |
500 |
|
- |
| 7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate,
Rating: (Marring)") |
- |
700 |
|
- |
| 7.2 , Table No. 2 , vii)(Tensile strength) |
- |
500 |
|
- |
| 7.2 , Table No. 2 , viii)(Elongation at break,) |
- |
500 |
|
- |
| 7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes
Water absorption %, Max Water penetration Gms, Max") |
- |
400 |
|
- |
| 7.2 , Table No. 2 , x)(Abrasion test (for unlined upper)) |
- |
700 |
|
- |
| 7.2 , Table No. 3 , i)(Breaking strength
"As per Method 1 of IS 7016 (Part 2)/
ISO 1421 : 2016 or ISO 17706") |
- |
500 |
|
- |
| 7.2 , Table No. 3 , ii)(Elongation at break) |
- |
500 |
|
- |
| 7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials) |
- |
500 |
|
- |
| 7.2 , Table No. 3 , iv)(Strength at needle perforation) |
- |
500 |
|
- |
| 7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination
/ upper material till prescribed cycles") |
- |
600 |
|
- |
| 7.2 , Table No. 3 , vi) , a)(Water vapour permeability,) |
- |
800 |
|
- |
| 7.2 , Table No. 3 , vi) , b)("Water vapour coefficient,
") |
- |
800 |
|
- |
| 7.2 , Table No. 3 , vii)(Hydrolysis resistance) |
- |
2000 |
|
- |
| 7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate) |
- |
700 |
|
- |
| 7.2 , Table No. 3 , ix)(Bursting Strength,) |
- |
500 |
|
- |
| 7.3 , Table No. 4 , i)(Tear strength,) |
- |
500 |
|
- |
| 7.3 , Table No. 4 , ii)(Abrasion resistance, cycles) |
- |
500 |
|
- |
| 7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale
rate with 10 rubs on dry or wet, ") |
- |
500 |
|
- |
| 7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method)
Grey scale rate, ") |
- |
500 |
|
- |
| 7.3 , Table No. 4 , v) , a)(Water vapour permeability,) |
- |
800 |
|
- |
| 7.3 , Table No. 4 , v) , b)("Water vapour coefficient,
"
As per IS 15298 (Part 1)) |
- |
800 |
|
- |
| 7.4 , Table No. 5 , i)(Thickness) |
- |
250 |
|
- |
| 7.4 , Table No. 5 , ii)(Flexing index) |
- |
500 |
|
- |
| 7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles) |
- |
400 |
|
- |
| 7.4 , Table No. 5 , iv) , a)(Water Absorption,) |
- |
600 |
|
- |
| 7.4 , Table No. 5 , iv) , b)(Water Desorption) |
- |
600 |
|
- |
| 7.5 , Table No. 6 , i)(Thickness) |
- |
250 |
|
- |
| 7.5 , Table No. 6 , ii)(Abrasion resistance, cycles
As per IS 15298 (Part 1)) |
- |
700 |
|
- |
| 7.5 , Table No. 6 , iii) , a)(Water Absorption) |
- |
600 |
|
- |
| 7.5 , Table No. 6 , iii) , b)(Water Desorption) |
- |
600 |
|
- |
| 7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear) |
- |
400 |
|
- |
| 7.6 , Table No. 7 , i)(Abrasion resistance (volume loss)) |
- |
800 |
|
- |
| 7.6 , Table No. 7 , ii)(Flexing resistance) |
- |
700 |
|
- |
| 7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes) |
- |
2000 |
|
- |
| 7.6 , Table No. 7 , iv)(Tear strength) |
- |
500 |
|
- |
| 7.6 , Table No. 7 , v)(Tensile strength) |
- |
500 |
|
- |
| 7.6 , Table No. 7 , vi)(Elongation at break) |
- |
500 |
|
- |
| 7.6 , Table No. 7 , vii)(Compression set) |
- |
300 |
|
- |
| 7.7 , Table No. 8 , i)(Compression set) |
- |
400 |
|
- |
| 7.7 , Table No. 8 , ii)(Split tear strength,) |
- |
500 |
|
- |
| 7.7 , Table No. 8 , iii)(Heat shrinkage,) |
- |
400 |
|
- |
| 7.7 , Table No. 8 , iv)(Elongation at break,) |
- |
500 |
|
- |
| 7.8 , Table No. 9 , i)(First dry collapsing load, hardness) |
- |
600 |
|
- |
| 7.8 , Table No. 9 , ii)(Resilience) |
- |
600 |
|
- |
| 7.8 , Table No. 9 , iii)(Moisture resistance) |
- |
700 |
|
- |
| 7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention) |
- |
600 |
|
- |
| 7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry) |
- |
600 |
|
- |
| 7.8 , Table No. 9 , v)(Peel strength) |
- |
800 |
|
- |
| 7.9 , Table No. 10 , i)(Peel strength) |
- |
800 |
|
- |
| 7.9 , Table No. 10 , ii)(Shear strength) |
- |
800 |
|
- |
| 7.10 , Table No. 11 , i)(Limit of useful extension,) |
- |
500 |
|
- |
| 7.10 , Table No. 11 , ii)(Needle strength,) |
- |
500 |
|
- |
| 7.11 , Table No. 12 , i)(Breaking strength of lace,) |
- |
500 |
|
- |
| 7.11 , Table No. 12 , ii)(Lace tag strength,) |
- |
500 |
|
- |
| 7.11 , Table No. 12 , iii)(Lace to lace abrasion,) |
- |
600 |
|
- |
| 7.11 , Table No. 12 , iv)("Colour fastness to water
Gray Scale Rate") |
- |
500 |
|
- |
| 7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook) |
- |
500 |
|
- |
| 7.11 , Table No. 12 , vi)(Corrosion resistance) |
- |
400 |
|
- |
| 8(MARKING AND PACKING) |
- |
100 |
|
- |
| 7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI)) |
- |
600 |
|
- |
| 7.12, Table no. 1 of IS 17011,(x)(pH) |
- |
400 |
|
- |
| 7.12.2 (Amendment 1)(Lead content) |
- |
400 |
|
- |
|
31 Dec, 2026 |
-
- |
| 888 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 17012 (2018) |
High ankle tactical boots with pu - Rubber sole - Specification |
- |
12900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.16.2(Breaking Strength of lace ) |
- |
500 |
|
- |
| 4.16.1(Length of lace ) |
- |
100 |
|
- |
| 4.15(D-ring & Hooks ) |
- |
0 |
|
- |
| 6.1(Resistance to Fuel Oil) |
- |
500 |
|
- |
| 4.14.9(Resistance to hot contact ) |
- |
500 |
|
- |
| 4.14.8(Flexing resistance ) |
- |
600 |
|
- |
| 4.14.7(Ageing test) |
- |
500 |
|
- |
| 4.14.6(Hardness (IRHD)) |
- |
400 |
|
- |
| 4.14.5(Abrasion resistance ) |
- |
800 |
|
- |
| 4.14.4(Tear Strength) |
- |
500 |
|
- |
| 4.14.3(Sole Density ) |
- |
400 |
|
- |
| 4.14.2(Thickness) |
- |
250 |
|
- |
| 4.14.1(Material) |
- |
0 |
|
- |
| 4.13(Breaking Strength of thread ) |
- |
500 |
|
- |
| 4.12.2(Tear Strength) |
- |
500 |
|
- |
| 4.12.1(Thickness ) |
- |
250 |
|
- |
| 4.11.2(Tear Strength) |
- |
500 |
|
- |
| 4.11.1(Thickness ) |
- |
250 |
|
- |
| 4.10.3(Water absorption & desorption percent) |
- |
600 |
|
- |
| 4.10.2(Abrasion resistance ) |
- |
700 |
|
- |
| 4.10.1(Material) |
- |
0 |
|
- |
| 4.9.3(Water absorption & desorption percent) |
- |
600 |
|
- |
| 4.9.2(Abrasion resistance ) |
- |
400 |
|
- |
| 4.9.1(Thickness) |
- |
250 |
|
- |
| 4.8(Thickness Toe puff & counter stiffener) |
- |
250 |
|
- |
| 4.7.5(Water Vapour permeability & coefficient ) |
- |
800 |
|
- |
| 4.7.4(Abrasion resistance ) |
- |
700 |
|
- |
| 4.7.3(Tear Strength) |
- |
500 |
|
- |
| 4.7.2(Material Counter & Tongue) |
- |
0 |
|
- |
| 4.7.1(Material vamp & Quarter) |
- |
0 |
|
- |
| 4.6.2(Tear Strength) |
- |
500 |
|
- |
| 4.6.1(Thickness ) |
- |
250 |
|
- |
| 4.5.8(Energy absorption of seat region ) |
- |
600 |
|
- |
| 4.5.7(Cold Insulation of sole complex) |
- |
800 |
|
- |
| 4.5.6(Heat Insulation of sole Complex) |
- |
700 |
|
- |
| 4.5.5(Antistatic test) |
- |
500 |
|
- |
| 4.5.4(Slip Resitance) |
- |
1200 |
|
- |
| 4.5.3.2(Interayer bond strength) |
- |
600 |
|
- |
| 4.5.3.1(Upper/outsole bond strength) |
- |
600 |
|
- |
| 4.5.2(Ergonomic Feature) |
- |
0 |
|
- |
| 4.5.1(Construction) |
- |
0 |
|
- |
| 4.4(Height of upper ) |
- |
200 |
|
- |
| 4.3.2(Weight) |
- |
100 |
|
- |
| 4.3.1(Size) |
- |
0 |
|
- |
| 4.2(Design ) |
- |
0 |
|
- |
| Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil) |
- |
500 |
|
- |
| 8, 8.1, 8.2, 8.2.1(Marking) |
- |
100 |
|
- |
| 9(Information to be Supplied) |
- |
0 |
|
- |
| Cl.4.6.4(Water Penetration and Water Absorption) |
- |
500 |
|
- |
| Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil) |
- |
500 |
|
- |
| 4.6.3(Water Penetration and water absorption ) |
- |
500 |
|
- |
| CL.8,8.1, 8.2,8.2.1(Marking) |
- |
100 |
|
- |
| Cl.9,(Information to be Supplied) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 889 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 15298 : Part 2 (2024) |
Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision) |
- |
15700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.2(Design) |
- |
0 |
|
- |
| Cl 5.2.2, Table 4(" Height of upper
") |
- |
200 |
|
- |
| Cl 5.2.3(Heel area) |
- |
100 |
|
- |
| Cl 5.3.1.1(Construction of whole footwear) |
- |
100 |
|
- |
| Cl 5.3.1.2(Upper/outsole bond strength) |
- |
600 |
|
- |
| Cl 5.3.2.1(Toe protection - general) |
- |
0 |
|
- |
| Cl 5.3.2.2(Internal length) |
- |
100 |
|
- |
| Cl 5.3.2.3(Width of toecap flange) |
- |
100 |
|
- |
| Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear) |
- |
400 |
|
- |
| Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear) |
- |
0 |
|
- |
| Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance) |
- |
0 |
|
- |
| Cl 5.3.2.6(Impact resistance) |
- |
600 |
|
- |
| Cl 5.3.2.7(Compression resistance) |
- |
500 |
|
- |
| Cl 5.3.3(Leak proofness) |
- |
500 |
|
- |
| Cl 5.3.4("Specific ergonomic features
") |
- |
100 |
|
- |
| Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution) |
- |
1200 |
|
- |
| Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI)) |
- |
600 |
|
- |
| Cl 5.3.6, Table no 1 of IS 17011 (x)(pH) |
- |
400 |
|
- |
| Cl 5.3.7(Seam strength) |
- |
500 |
|
- |
| Cl 5.3.8(Lead Content ( National Annex A)) |
- |
400 |
|
- |
| Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper) |
- |
0 |
|
- |
| Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper) |
- |
0 |
|
- |
| Cl 5.4.2(Thickness) |
- |
250 |
|
- |
| Cl 5.4.3(Tear strength) |
- |
500 |
|
- |
| Cl 5.4.4, Table 11(Tensile properties- Tensile strength) |
- |
500 |
|
- |
| Cl 5.4.4, Table 11(Tensile properties- Breaking Force) |
- |
500 |
|
- |
| Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation) |
- |
500 |
|
- |
| Cl 5.4.4, Table 11(Tensile properties- Elongation at break) |
- |
500 |
|
- |
| Cl 5.4.5(Flexing resistance) |
- |
500 |
|
- |
| Cl 5.4.6(Water vapour permeability and coefficient) |
- |
800 |
|
- |
| Cl 5.4.7(Resistance to hydrolysis) |
- |
2000 |
|
- |
| Cl 5.5.2(Lining- Tear strength) |
- |
500 |
|
- |
| Cl 5.5.3(Lining- Abrasion resistance) |
- |
700 |
|
- |
| Cl 5.5.4(Lining-Water vapour permeability and coefficient) |
- |
800 |
|
- |
| Cl 5.6.2, Table 14(Tear strength of tongue) |
- |
500 |
|
- |
| Cl 5.7.1(Thickness of Insole, insock and footbed) |
- |
100 |
|
- |
| Cl 5.7.2(Water permeability of insock) |
- |
600 |
|
- |
| Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed) |
- |
600 |
|
- |
| Cl 5.7.4.1(Abrasion resistance of Insoles) |
- |
400 |
|
- |
| Cl 5.7.4.2(Abrasion resistance of Insocks) |
- |
700 |
|
- |
| Cl 5.8.2.1, Table 15(Thickness of Outsole) |
- |
250 |
|
- |
| Cl 5.8.2.2(Cleated area) |
- |
0 |
|
- |
| Cl 5.8.2.3(Cleat height) |
- |
100 |
|
- |
| Cl 5.8.3(Outsole- Tear strength) |
- |
500 |
|
- |
| Cl 5.8.4(Outsole- Abrasion resistance) |
- |
800 |
|
- |
| Cl 5.8.5(Outsole-Flexing resistance) |
- |
600 |
|
- |
| Cl 5.8.6(Outsole-Resistance to hydrolysis) |
- |
2000 |
|
- |
| Cl 5.8.7(Interlayer bond strength) |
- |
600 |
|
- |
| Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P)) |
- |
500 |
|
- |
| Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL)) |
- |
500 |
|
- |
| Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS)) |
- |
500 |
|
- |
| Cl 6.2.1.2(Construction of perforation resistant insert) |
- |
0 |
|
- |
| Cl 6.2.1.3(Dimensions of perforation resistant insert) |
- |
0 |
|
- |
| Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear) |
- |
400 |
|
- |
| Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear) |
- |
0 |
|
- |
| Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts) |
- |
0 |
|
- |
| Cl 6.2.2.1(Electrical properties of Partially conductive footwear) |
- |
700 |
|
- |
| Cl 6.2.2.2(Electrical properties of Antistatic footwear) |
- |
700 |
|
- |
| Cl 6.2.3.1(Heat insulation of outsole complex) |
- |
700 |
|
- |
| Cl 6.2.3.2(Cold insulation of outsole complex) |
- |
800 |
|
- |
| Cl 6.2.4(Energy absorption of seat region) |
- |
600 |
|
- |
| Cl 6.2.5(Water resistance) |
- |
600 |
|
- |
| Cl 6.2.8.2(Cut resistance footwear- design) |
- |
500 |
|
- |
| Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear) |
- |
100 |
|
- |
| Cl 6.2.8.3(Resistance to cutting) |
- |
500 |
|
- |
| Cl 6.2.9(Scuff cap) |
- |
200 |
|
- |
| Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine
") |
- |
1200 |
|
- |
| Cl 6.3(Upper — Water penetration and absorption) |
- |
500 |
|
- |
| Cl 6.4.1(Resistance to hot contact - Outsole) |
- |
500 |
|
- |
| Cl 6.4.2(Resistance to fuel oil - Outsole) |
- |
500 |
|
- |
| Cl 6.4.3.1(Mechanical properties of Ladder grip) |
- |
0 |
|
- |
| Cl 6.4.3.2(Design of Ladder grip) |
- |
0 |
|
- |
| Cl 6.4.3.3(Cleat height in the waist area of Ladder grip) |
- |
100 |
|
- |
| Cl 6.4.3.4(Heel breast of Ladder grip) |
- |
100 |
|
- |
| Cl 7, Table 20("Marking
") |
- |
100 |
|
- |
|
31 Dec, 2026 |
-
- |
| 890 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 5557 : Part 1 (2024) |
All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective |
- |
10900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Design) |
- |
0 |
|
- |
| 6(Sizes and Fittines) |
- |
0 |
|
- |
| 7(Consturction) |
- |
0 |
|
- |
| 8.1(Lining Material) |
- |
0 |
|
- |
| 8.2, Table-1 (i)(Width, mm, Min) |
- |
100 |
|
- |
| 8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen)) |
- |
500 |
|
- |
| 8.3, Table-2 (i)(Sewing thread for piping/binding") |
- |
500 |
|
- |
| 8.4(Use of Rubber material) |
- |
0 |
|
- |
| 8.4.1, Table-3 (i)(Hardness, (IRHD)) |
- |
400 |
|
- |
| 8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h) |
- |
400 |
|
- |
| 8.5(Upper material) |
- |
0 |
|
- |
| 8.5.1(Tensile Strength of upper) |
- |
500 |
|
- |
| 8.5.2(Thickness) |
- |
100 |
|
- |
| 8.5.3(Flexing Resistance) |
- |
600 |
|
- |
| 8.5.4(Abrasion Resistance) |
- |
700 |
|
- |
| 8.6.1(Thickness of Outsole) |
- |
200 |
|
- |
| 8.6.2(Tear Strength) |
- |
500 |
|
- |
| 8.6.3(Abrasion Resistance of Outsole) |
- |
800 |
|
- |
| 8.6.4(Flexing Resistance) |
- |
600 |
|
- |
| 8.6.5(Inter layer Bond Strength of outsole) |
- |
600 |
|
- |
| Cl-8.7(Insocks material) |
- |
0 |
|
- |
| 8.7.1(Thickness of Insocks) |
- |
100 |
|
- |
| Cl-8.7.2(Abrasion Resistance of Insock) |
- |
700 |
|
- |
| Cl-8.8.1(Outsole/Heel) |
- |
500 |
|
- |
| Cl-8.9(Leak Proof Test) |
- |
500 |
|
- |
| 8.10(Height of Upper) |
- |
200 |
|
- |
| 8.11(Adhesion Test for Rubberized Textile Upper) |
- |
600 |
|
- |
| Cl-8.12(Upper Outsole Bond Strength) |
- |
600 |
|
- |
| Cl-8.13(Internal Length of Toe Cap) |
- |
200 |
|
- |
| Cl-8.14(Impact Resistance of Safety Footwear) |
- |
700 |
|
- |
| Cl-8.15(Compression Resistance of Safety Footwear) |
- |
600 |
|
- |
| 8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS)) |
- |
1200 |
|
- |
| 8.17(Steel Floor with Glycerine) |
- |
1200 |
|
- |
| 8.18(Corrosion Resistant Test for Toe Caps) |
- |
400 |
|
- |
| 9.1(Penetration Resistance) |
- |
500 |
|
- |
| 9.2(Antistatic Footwear) |
- |
700 |
|
- |
| 9.4(Electrical Resistance) |
- |
700 |
|
- |
| 9.5(Resistance to Acid and Alkali- Limited contact with chemicals),) |
- |
500 |
|
- |
| 9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals) |
- |
500 |
|
- |
| 9.6(Resistance to Fuel Oil) |
- |
500 |
|
- |
| 11.2(Marking) |
- |
100 |
|
- |
|
31 Dec, 2026 |
-
- |
| 891 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 5557 : Part 2 (2018) |
All rubber gum boots and ankle boots: Part 2 occupational purposes |
- |
10700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(CLASSIFICATION) |
- |
0 |
|
- |
| 3.2(compact insole) |
- |
400 |
|
- |
| 3.3(compact insole) |
- |
400 |
|
- |
| 3.4(compact Outsole/heel) |
- |
400 |
|
- |
| 3.5(Description lining material) |
- |
0 |
|
- |
| 3.6(description occupatioanl footwear) |
- |
0 |
|
- |
| 3.7(Ruber material) |
- |
0 |
|
- |
| 4(Type & varity) |
- |
0 |
|
- |
| 5(Design) |
- |
0 |
|
- |
| 6(size & fitting) |
- |
0 |
|
- |
| 7.1(lining material) |
- |
0 |
|
- |
| 7.1.1(Tear strength) |
- |
500 |
|
- |
| 7.1.2(Abrasion resistance) |
- |
700 |
|
- |
| 7.2(Coated bindind material) |
- |
500 |
|
- |
| 7.3(Thread for upper closing) |
- |
500 |
|
- |
| 7.3(Thread for upper closing - sulphur test) |
- |
400 |
|
- |
| 7.4(Use of rubber) |
- |
0 |
|
- |
| 7.4.1(Physical requirement of rubber component) |
- |
700 |
|
- |
| 7.5(observation of Upper) |
- |
0 |
|
- |
| 7.5.1(Tensile) |
- |
500 |
|
- |
| 7.5.2(Thickness) |
- |
100 |
|
- |
| 7.5.3(Flexing Resistance) |
- |
600 |
|
- |
| 7.6(Outsole/Heel) |
- |
0 |
|
- |
| 7.6.1(Out sole thickness) |
- |
200 |
|
- |
| 7.6.2(out sole tear strength) |
- |
500 |
|
- |
| 7.6.3(out sole abrasion) |
- |
800 |
|
- |
| 7.6.4(out sole flexing) |
- |
600 |
|
- |
| 7.6.5(Interlayer bond strength) |
- |
600 |
|
- |
| 7.7(INSOCK Visual) |
- |
100 |
|
- |
| 7.7.1(Insock thickness) |
- |
100 |
|
- |
| 7.7.2(Insock abrasion) |
- |
700 |
|
- |
| 8(CONSTRUCTION) |
- |
0 |
|
- |
| 8.1(Hot contact) |
- |
500 |
|
- |
| 8.2(Leak proofness) |
- |
500 |
|
- |
| 8.3(Height of upper) |
- |
200 |
|
- |
| 8.4(Adhesion test) |
- |
600 |
|
- |
| 8.5(Resistance to acid & alkaline) |
- |
500 |
|
- |
| 8.6(Resistance to fule oil) |
- |
500 |
|
- |
| 8.7.1(Antistatic) |
- |
700 |
|
- |
| 8.7.2(CONDUCTIVE FOOTWEAR) |
- |
700 |
|
- |
| 8.7.3(Elecrically nsulating footwear) |
- |
1000 |
|
- |
| 8.7.4(Resistance to cold) |
- |
800 |
|
- |
| 10(Finish of boots) |
- |
0 |
|
- |
| 11.1(Marking) |
- |
100 |
|
- |
| 11.2(Marking) |
- |
100 |
|
- |
| 11.3(Marking) |
- |
100 |
|
- |
|
31 Dec, 2026 |
-
- |
| 892 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 13995 (1995) |
Unlined moulded rubber boots - Specification |
Unlined moulded rubber boots |
2700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.7(Size) |
- |
100 |
|
OK |
| 5.1.6(Design) |
- |
0 |
|
OK |
| 5.1.5(Flexing resistance of upper) |
- |
600 |
|
OK |
| 5.1.4(Resistance to dry heat ageing ) |
- |
500 |
|
OK |
| 5.1.3(Tear Strength) |
- |
500 |
|
OK |
| 5.1.2(Tensile Strength (after ageing)) |
- |
500 |
|
OK |
| 5.1.1(Tensile Strength (before ageing)) |
- |
500 |
|
OK |
| 4.1(Thickness ) |
- |
250 |
|
OK |
| 6, 6.1(Marking) |
- |
100 |
|
OK |
|
31 Dec, 2026 |
-
- |
| 893 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 11544 (1986) |
Specification for slipper, rubber |
- |
3800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.6(Thickness of components) |
- |
100 |
|
OK |
| 3.2.5(Type of Thread) |
- |
500 |
|
OK |
| 3.2.4(Picks per cm) |
- |
200 |
|
OK |
| 3.2.4(End per cm) |
- |
200 |
|
OK |
| 3.2.4(Mass per unit area) |
- |
400 |
|
OK |
| 3.2(Flexural endurance) |
- |
1500 |
|
OK |
| 3.2(Hardness after ageing) |
- |
500 |
|
OK |
| 3.2(Hardness (IRHD)) |
- |
400 |
|
OK |
| 3.2(Relative density ) |
- |
400 |
|
OK |
| 3.1(Shape & Design) |
- |
100 |
|
OK |
| 3.2.2(Bottom Filling Material) |
- |
100 |
|
OK |
| 3.2.4.1(Weave of fabrics) |
- |
100 |
|
OK |
| 3.2.7(vulcanized process) |
- |
100 |
|
OK |
| 3.2.8(Workmanship and Finish -) |
- |
0 |
|
OK |
| 3.2.9(Preservation -) |
- |
100 |
|
OK |
| Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing) |
- |
100 |
|
OK |
|
31 Dec, 2026 |
-
- |
| 894 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 6664 (1992) |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
- |
3500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4, Cl.4.1,4.1.1,4.1.2(Requirements) |
- |
0 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density) |
- |
400 |
|
OK |
| Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min) |
- |
400 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr) |
- |
500 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max) |
- |
400 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min) |
- |
500 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
0 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max) |
- |
500 |
|
OK |
| Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max) |
- |
0 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles) |
- |
600 |
|
OK |
| 5, 5.1(Marking) |
- |
100 |
|
OK |
| 6, 6.1(Packing) |
- |
0 |
|
OK |
| 4.2(Size & Thickness ) |
- |
250 |
|
OK |
| 6, 6.1(Packing) |
- |
0 |
|
- |
| Cl.4.1.3 and 8.3,Table 1 ii(Thickness) |
- |
250 |
|
- |
| Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N) |
- |
800 |
|
- |
| 4, Cl.4.1,4.1.1,4.1.2(Requirements) |
- |
0 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density) |
- |
300 |
|
OK |
| Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min) |
- |
300 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr) |
- |
500 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max) |
- |
500 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min) |
- |
400 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
200 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max) |
- |
300 |
|
OK |
| Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max) |
- |
200 |
|
OK |
| Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles) |
- |
700 |
|
OK |
| 5, 5.1(Marking) |
- |
0 |
|
OK |
| 6, 6.1(Packing) |
- |
- |
|
- |
| Cl.4.1.3 and 8.3,Table 1 ii(Thickness) |
- |
- |
|
- |
| Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N) |
- |
- |
|
- |
|
31 Dec, 2026 |
-
- |
| 895 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 6719 (1972) |
Solid Pvc Soles And Heels |
- |
2100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.6.1(Hardness ) |
- |
400 |
|
OK |
| 3.6 (iv)(Tear Strength a) Force Part b) Back Part ) |
- |
500 |
|
OK |
| 3.6 (i)(Relative density ) |
- |
400 |
|
OK |
| Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max)) |
- |
600 |
|
- |
| Table 1 (Abrasion resistance)(Abrasion resistance at applied
force of 10 N (volume loss),
mm3, Max) |
- |
800 |
|
- |
| Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass) |
- |
400 |
|
- |
| Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for
infants, children and
boys and girls, ppm") |
- |
400 |
|
- |
| Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm
") |
- |
400 |
|
- |
| Cl. 6.4(Measurement of thickness) |
- |
250 |
|
- |
|
31 Dec, 2026 |
-
- |
| 896 |
MSME TESTING CENTRE, CHENNAI
| 6106704
| IS 5557 (2004) |
Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision) |
- |
7300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil) |
- |
500 |
|
OK |
| 5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design) |
- |
0 |
|
OK |
| 5/5.1.2 -IS 1638(REQUIREMENTS-Size) |
- |
100 |
|
OK |
| 5/5.1.3-Table1(REQUIREMENTS-Thickness) |
- |
250 |
|
OK |
| 5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components) |
- |
2300 |
|
OK |
| 5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric-
accordance with IS 1969) |
- |
900 |
|
OK |
| 5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap-
an per IS 5852) |
- |
600 |
|
OK |
| 5/5.1.6/5.1.6.1-Fig. 1,
Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction) |
- |
100 |
|
OK |
| 5/5.1.6/5.1.6.2(REQUIREMENTS- Construction) |
- |
0 |
|
OK |
| 5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment-
as per IS 3400 (Part 4)) |
- |
500 |
|
OK |
| 5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength) |
- |
500 |
|
OK |
| 5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance-
as per Annex B.) |
- |
600 |
|
OK |
| 5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test) |
- |
400 |
|
OK |
| 5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test-
as per IS IS 3400 (Part 5)) |
- |
500 |
|
OK |
| 5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test-
as per Annex C) |
- |
600 |
|
OK |
| 5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots) |
- |
200 |
|
OK |
| 6.1(Marking) |
- |
100 |
|
OK |
| 6, 6.1(Packing) |
- |
0 |
|
OK |
|
31 Dec, 2026 |
-
- |
| 897 |
ACCURATE TEST SOLUTIONS LLP
| 8192806
| IS 16647 (2017) |
Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification |
Scope restricted upto pipe size of nominal dia 630 mm. |
45000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.5( Density, g/cc) |
- |
2000 |
|
- |
| 9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure) |
- |
4000 |
|
- |
| 7.3( Opacity) |
- |
2000 |
|
- |
| 9.2, table -11( Resistance to External Blows at 0 °C) |
- |
3000 |
|
- |
| 8.2 table-9( Pipe Ends) |
- |
500 |
|
- |
| 5 / 5.1(MATERIALS ) |
- |
500 |
|
- |
| 5.4( K-Value) |
- |
500 |
|
- |
| 5.6 / 5.6.1( Material Classification, table -1) |
- |
500 |
|
- |
| 6.0(CLASSIFICATION OF PIPES, table-2) |
- |
500 |
|
- |
| 7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance) |
- |
1000 |
|
- |
| 7.2( Colour) |
- |
500 |
|
- |
| 8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point) |
- |
2000 |
|
- |
| 8.1.2, table 4 to 7(Wall Thickness) |
- |
1000 |
|
- |
| 8.1.3 (Length, meter) |
- |
1000 |
|
- |
| 8.2 table-9(Dimensions of Integral Socket) |
- |
1000 |
|
- |
| 9.3 table-12( Ring Stiffness) |
- |
3000 |
|
- |
| 9.4, annexure-E( Orientation Factor) |
- |
2000 |
|
- |
| 10, table-13( PHYSICAL AND 1CHARACTERISTICS) |
- |
0 |
|
- |
| 11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints) |
- |
0 |
|
- |
| 11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies) |
- |
3000 |
|
- |
| 11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies) |
- |
3000 |
|
- |
| 12(a)( ELASTOMERIC SEALS) |
- |
3000 |
|
- |
| 12(b)( ELASTOMERIC SEALS) |
- |
3000 |
|
- |
| Cl.10, Table 10/1(Vicat Softening Temp (C)) |
- |
3000 |
|
- |
| Cl.10, Table 10/2(Effect on Water) |
- |
5000 |
|
- |
| Cl.10, Table 10/3(Resistant to di-chloromethane (Degree of gelation)) |
- |
3000 |
|
- |
| Cl.10, Table 10/4(Alternate Test (Tensile test)) |
- |
4000 |
|
- |
|
08 Dec, 2028 |
-
Included w.e.f 24.02.2026
5.3 (VCM Content) |
| 898 |
Samridhi Test House Pvt. Ltd.
| 8184706
| IS 17803 (2022) |
POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION |
All Grade / Type / Size / Designation |
28400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Manufacture and Workmanship) |
- |
500 |
|
- |
| 5.3(Manufacture and Workmanship) |
- |
500 |
|
- |
| 7.1(Materials) |
- |
500 |
|
- |
| 7.1.1(copper bottle - copper) |
- |
500 |
|
- |
| 7.1.1(copper bottle – lead) |
- |
500 |
|
- |
| 7.1.1(copper bottle – bismuth) |
- |
500 |
|
- |
| 7.1.1(copper bottle – oxygen) |
- |
500 |
|
- |
| 7.1.1(copper bottle – total impurities) |
- |
500 |
|
- |
| 7.1.3.3(o-ring or washer - Defects) |
- |
100 |
|
- |
| 7.1.4(Auxillary closure- Bisphenol A (BPA)) |
- |
500 |
|
- |
| 7.1.8(Anodic coating) |
- |
100 |
|
- |
| 7.1.8(Hard Anodized) |
- |
100 |
|
- |
| 7.1.9(External coating– Limit of Lead) |
- |
100 |
|
- |
| 7.1.9(External coating– Limit of Cadmium) |
- |
100 |
|
- |
| 7.2(Capacity) |
- |
500 |
|
- |
| 7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test) |
- |
300 |
|
- |
| 7.4(Test for strength of shoulder strap) |
- |
300 |
|
- |
| 7.5(Test for cord) |
- |
300 |
|
- |
| 7.7(Leakage test) |
- |
300 |
|
- |
| 7.8(Staining test) |
- |
300 |
|
- |
| 7.9(Lever, device for operating or Regulating flow test) |
- |
300 |
|
- |
| 7.10(Stability test) |
- |
300 |
|
- |
| 7.11(Load test) |
- |
300 |
|
- |
| 7.12(Food safe test/Leaching test) |
- |
300 |
|
- |
| 7.12(Water potability) |
- |
300 |
|
- |
| 7.13(Turbidity) |
- |
500 |
|
- |
| 7.13(pH value) |
- |
500 |
|
- |
| 7.13(Taste threshold) |
- |
500 |
|
- |
| 7.13(Colour, Hazen units) |
- |
500 |
|
- |
| 7.13(Odour) |
- |
500 |
|
- |
| 7.13(Total dissolved solids) |
- |
500 |
|
- |
| 9.1(Marking) |
- |
500 |
|
- |
| Cl. 7.1.5(PERFORMANCE TEST (Lever device )) |
- |
500 |
|
- |
| 7.1.1.1(copper bottle – Thickness) |
- |
500 |
|
- |
| 7.1.2.1(Stainless steel bottle (thickness)) |
- |
500 |
|
- |
| 7.1.2.1(Stainless steel bottle (material)) |
- |
500 |
|
- |
| 7.1.2 Note 2(Aluminium bottle (Material)) |
- |
500 |
|
- |
| 7.1.3.1(Stopper Material) |
- |
500 |
|
- |
| 7.1.3.2(o-ring or washer Overall migration) |
- |
500 |
|
- |
| 7.1.4(Auxillary closure - Material) |
- |
500 |
|
- |
| 7.1.9(External coating - Thickness test) |
- |
500 |
|
- |
| 7.1.9(External coating - Salt water corrosion test) |
- |
1000 |
|
- |
| 7.1.9(External coating - Adhesion test) |
- |
1000 |
|
- |
| 7.3.1.3 (Amendment 1)(Drop impact test - Free fall test) |
- |
1000 |
|
- |
| 7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang) |
- |
1000 |
|
- |
| 7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang) |
- |
1000 |
|
- |
| Cl 7.6(Test for cord chain) |
- |
1000 |
|
- |
| 7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test) |
- |
1000 |
|
- |
| 15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel) |
- |
0 |
|
- |
| 7.1.3(Overall Migration test (IS 9845 : 1998)) |
- |
500 |
|
- |
|
- |
-
1.
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel (Annex A (Amendment 1)- Leaching of food grade stainless steel) Leaching Test Test Facility not Available
2.
7.12 (Food safe test/Leaching test) Leaching Test Test Facility not Available. |
| 899 |
Aaditech Test and Calibration Lab LLP
| 8179926
| IS 7098 : Part 1 (2025) |
Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision) |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(Conductors -Material) |
- |
20 |
|
- |
| Cl-5, Table-1 (i)(Tensile strength) |
- |
100 |
|
- |
| Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven) |
- |
100 |
|
- |
| Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing) |
- |
100 |
|
- |
| Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing) |
- |
100 |
|
- |
| Cl-5, Table-1 (iii) (a)(Hot set- Treatment;) |
- |
200 |
|
- |
| Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load) |
- |
200 |
|
- |
| Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling) |
- |
200 |
|
- |
| Cl-5, Table-1 (iv)(Shrinkage) |
- |
100 |
|
- |
| Cl-5, Table-1 (v)(Water absorption (gravimetric)) |
- |
250 |
|
- |
| Cl-5, Table-1 (vi)(Volume resistivity) |
- |
200 |
|
- |
| Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber) |
- |
200 |
|
- |
| Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials) |
- |
200 |
|
- |
| Cl-7(Armouring) |
- |
100 |
|
- |
| Cl-8(Outer Sheath) |
- |
200 |
|
- |
| Cl-10.3(Tolerance on Thickness of Insulation) |
- |
20 |
|
- |
| Cl-11(Core Identification) |
- |
20 |
|
- |
| Cl-12(Laying up of Cores) |
- |
20 |
|
- |
| Cl-13(Inner Sheath (Common Covering)) |
- |
20 |
|
- |
| Cl-14.1(Armouring- Application) |
- |
20 |
|
- |
| Cl-14.1.2(armour round wires/formed wires) |
- |
100 |
|
- |
| Cl-14.2(Type of Armour) |
- |
50 |
|
- |
| Cl-14.3(Dimensions) |
- |
100 |
|
- |
| Cl-14.4(Joints) |
- |
20 |
|
- |
| Cl-14.5(Resistance) |
- |
400 |
|
- |
| Cl-15.3(Thickness of Outer Sheath) |
- |
50 |
|
- |
| Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);) |
- |
500 |
|
- |
| Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);) |
- |
150 |
|
- |
| Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);) |
- |
100 |
|
- |
| Cl-16.1 (i) (d)(Test on conductor: Resistance test) |
- |
500 |
|
- |
| Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength) |
- |
150 |
|
- |
| Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break) |
- |
150 |
|
- |
| Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires) |
- |
100 |
|
- |
| Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires) |
- |
200 |
|
- |
| Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating) |
- |
100 |
|
- |
| Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating) |
- |
100 |
|
- |
| Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.) |
- |
150 |
|
- |
| Cl-10, 13, 15(Test for thickness of insulation and sheath) |
- |
100 |
|
- |
| Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;) |
- |
150 |
|
- |
| Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven) |
- |
100 |
|
- |
| Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven) |
- |
200 |
|
- |
| Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test) |
- |
100 |
|
- |
| Cl-16.1 (v) (6)(PVC Sheath- Heat shock test) |
- |
50 |
|
- |
| Cl-16.1 (v) (7)(PVC Sheath- Thermal stability) |
- |
100 |
|
- |
| Cl-8.3-Table 1A(PE Sheath- Carbon black content) |
- |
100 |
|
- |
| Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing) |
- |
150 |
|
- |
| Cl-8.3-Table 1A(PE Sheath- Hot deformation) |
- |
150 |
|
- |
| Cl-8.3-Table 1A(PE Sheath- Shrinkage test.) |
- |
100 |
|
- |
| Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing) |
- |
100 |
|
- |
| Cl- Table 1B(LSHF Sheath- Hot deformation) |
- |
100 |
|
- |
| Cl- Table 1B(LSHF Sheath- Water absorption test) |
- |
500 |
|
- |
| Cl- Table 1B(LSHF Sheath- Shrinkage test) |
- |
150 |
|
- |
| Cl-17.2(High voltage test) |
- |
2000 |
|
- |
| Cl-17.3(Flammability test) |
- |
200 |
|
- |
| Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath)) |
- |
2500 |
|
- |
| Cl-17.5(Flame retardance test on single cable) |
- |
2000 |
|
- |
| Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) |
- |
1500 |
|
- |
| Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath)) |
- |
2000 |
|
- |
| Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath)) |
- |
2000 |
|
- |
| Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath)) |
- |
2000 |
|
- |
| Cl-17.10(Test for pH and conductivity of LSHF Sheath) |
- |
250 |
|
- |
| Cl-17.11(Test for light transmission for LSHF Sheathed Cables) |
- |
2500 |
|
- |
| Cl-16.4 (i)(Cold bend test for outer sheath) |
- |
100 |
|
- |
| Cl-16.4 (ii)(Cold impact test for outer sheath) |
- |
100 |
|
- |
| Cl-16.4 (iii)(Cold elongation test for LSHF sheath) |
- |
100 |
|
- |
| Cl. 9(Conductor - Regarding Construction Compliance) |
- |
100 |
|
- |
| Cl. 10.4(Application of Insulation) |
- |
100 |
|
- |
| Cl. 13.3(Thickness of Inner sheath) |
- |
100 |
|
- |
| Cl. 15.1(Application of Outer sheath) |
- |
0 |
|
- |
| Cl. 15.2(Clour of Outer sheath) |
- |
10 |
|
- |
|
- |
-
- |
| 900 |
Amit Test and Calibration Centre (8172006)
| 8172006
| IS 9968 : Part 1 (2025) |
Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision) |
- |
18000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(Copper Conductor) |
- |
200 |
|
- |
| Cl-4.2(Aluminum Conductor) |
- |
200 |
|
- |
| Cl-6.1(Proofed Tape) |
- |
200 |
|
- |
| Cl-6.2("Polyethylene Terephthalate (PETP) Tape or
Plastic Tape or Any Other Suitable Tape") |
- |
200 |
|
- |
| Cl-6.3(Glass Tape) |
- |
200 |
|
- |
| Cl-7(Fillers) |
- |
200 |
|
- |
| Cl-8.1(Textile Braid) |
- |
200 |
|
- |
| Cl-8.2(Glass Braid) |
- |
200 |
|
- |
| Cl-9.1(General Service Insulated Cables and Flexible Cords) |
- |
200 |
|
- |
| Cl-9.2(Heat Resisting Insulated Cables) |
- |
200 |
|
- |
| Cl-9.3(Silicon Rubber Insulated Cable) |
- |
200 |
|
- |
| Cl-10.1(Preservative Compound) |
- |
200 |
|
- |
| Cl-10.2(Varnish) |
- |
200 |
|
- |
| Cl-12(separator tape) |
- |
200 |
|
- |
| Cl-14(Core Identification) |
- |
200 |
|
- |
| Cl-18(Laying UP of Cores) |
- |
200 |
|
- |
| Cl-19(Binder Tape) |
- |
200 |
|
- |
| Cl-20.2(Thickness of Sheath) |
- |
1500 |
|
- |
| Cl-20.3(Tolerance on Thickness of Sheath) |
- |
1500 |
|
- |
| Cl-20.4(Colour) |
- |
200 |
|
- |
| Cl-22.1 (i) (a)(Conductor resistance test) |
- |
1500 |
|
- |
| Cl-22.1 (i) (b)(High voltage test or spark test.) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (a)(Annealing test (for copper);) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (c)(Wrapping test (for aluminium);) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (g)(Hot set test for insulation and sheath) |
- |
2000 |
|
- |
| Cl-22.1 (ii) (h)(High voltage test) |
- |
1500 |
|
- |
| Cl-22.1 (ii) (i)(Insulation resistance test) |
- |
3500 |
|
- |
| Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter) |
- |
1500 |
|
- |
| Electrical(Tensile strength and elongation at break) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (g), 2(Ageing in air oven) |
- |
3000 |
|
- |
| Cl-22.1 (iii) (g), 3(Ageing in air bomb) |
- |
3000 |
|
- |
| Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb) |
- |
3000 |
|
- |
| Cl-22.1 (iii) (g), 5(Hot set) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (g), 6(Oil resistance;) |
- |
2000 |
|
- |
| Cl-22.1 (iii) (g), 7(Tear resistance) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (i)(High voltage (water immersion) test;) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (j)(Flammability test) |
- |
1500 |
|
- |
| Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable)) |
- |
5500 |
|
- |
| Cl-24.1(Manufacturer’s Identification) |
- |
200 |
|
- |
| Cl-25(Packing and Morning) |
- |
200 |
|
- |
|
- |
-
Included w.e.f 17.03.2026 |
