BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15472 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7111

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10702 (2023)

Hawai Chappal-Specification

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	180	-
4.2(Length)	-	180	-
4.3(Thickness)	-	180	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	2000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	180	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	180	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	35000	WITHOUT CHEMICAL 7000 10% DISCOUNT TO BIS
6(MARKING AND PACKING)	-	150	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	500	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	2000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	650	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	650	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1080	-

19 Jul, 2027

-
-

7112

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	1080	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	630	-
Cl-4.13.1(Material)	-	100	-
Cl-4.4(Height of Upper)	-	150	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	800	-
Cl-7(Marking)	-	100	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	1080	-
Cl-4.13.1(Material)	-	100	-

19 Jul, 2027

-
-

7113

EMC Testing and Compliance LLP, Gurugram

8141526

IS 13893 (1994)

Polyurethane soles semirigid - specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	2700	-
4.3(Ross Flex test)	-	2000	-
4.3(Flexural strength )	-	2000	-
4.3(Abrasion Resistance)	-	1080	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	300	-
4.3(Relative density )	-	300	-
4.2(Thickness )	-	180	-
4.1(Design)	-	150	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	180	-
4.2 (Amendment 2)(Thickness)	-	100	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	300	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1080	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1080	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	2700	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	250	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	250	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	600	-

19 Jul, 2027

-
-

7114

EMC Testing and Compliance LLP, Gurugram

8141526

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(REQUIREMENTS-General)	-	100	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	180	-
6(Marking and packing)	-	180	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4000	-
Cl.6.1,6.2,6.3(Marking and packing)	-	180	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	100	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	150	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	100	-
8.3(Measurement of thickness)	-	180	-
5.5 (Amendment 1)(Thickness)	-	180	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	300	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	600	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	1080	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	250	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	250	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	500	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1080	-

19 Jul, 2027

-
-

7115

EMC Testing and Compliance LLP, Gurugram

8141526

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Upto and including 250V supply for Household and simila

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	10% discount on BIS samples
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8.1,a(Marking )	-	500	10% discount on BIS samples
8.1,b(Marking )	-	500	10% discount on BIS samples
8.1,c(Marking )	-	500	10% discount on BIS samples
8.1,d(Marking )	-	500	10% discount on BIS samples
8.1,e(Marking )	-	500	10% discount on BIS samples
8.1,f(Marking )	-	500	10% discount on BIS samples
8.1,g(Marking )	-	500	10% discount on BIS samples
8.2(Marking )	-	500	10% discount on BIS samples
8.3,a(Marking )	-	500	10% discount on BIS samples
8.3,b(Marking )	-	500	10% discount on BIS samples
8.3,c(Marking )	-	500	10% discount on BIS samples
8.3,d(Marking )	-	500	10% discount on BIS samples
8.3,e(Marking )	-	500	10% discount on BIS samples
8.4(Marking )	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	10% discount on BIS samples
6.2(Rating)	-	500	10% discount on BIS samples
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	10% discount on BIS samples
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	10% discount on BIS samples
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
10.1(Speed Regulators)	-	2000	10% discount on BIS samples
10.2(Speed Regulators)	-	2000	10% discount on BIS samples
10.3(Speed Regulators)	-	2000	10% discount on BIS samples
10.4(Speed Regulators)	-	2000	10% discount on BIS samples
10.5(Speed Regulators)	-	2000	10% discount on BIS samples
10.6(Speed Regulators)	-	2000	10% discount on BIS samples
10.7(Speed Regulators)	-	2000	10% discount on BIS samples
10.8(Speed Regulators)	-	2000	10% discount on BIS samples
11.1(Starting)	-	2000	10% discount on BIS samples
11.2(Starting)	-	2000	10% discount on BIS samples
12(Interchangeability)	-	2000	10% discount on BIS samples
13(Silent Operation)	-	5000	10% discount on BIS samples
14.3 & Table 1(Test for Air Performance)	-	5000	10% discount on BIS samples
14.4(Measurement of Speed of the Fan )	-	4000	10% discount on BIS samples
14.5(Measurement of Power factor and Power Input)	-	4000	10% discount on BIS samples
16(Endurance Test)	-	5000	10% discount on BIS samples
17(Test for Harmonic Distortion)	-	4000	10% discount on BIS samples
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	12000	-

19 Jul, 2027

-
-

7116

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17043 (2018)

Derby shoes - Specification

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	Innocuosness test price: 35000; without Innocuosness 19000 per sample 10% discount to BIS
4.15.2(Breaking load & tag retention)	-	500	-
4.15.1(Length of laces )	-	100	-
4.14(Eyelet pull out test)	-	100	-
4.13.8(Flex resistance )	-	1080	-
4.13.7(Abrasion resistance )	-	1080	-
4.13.6(Tear Strength)	-	800	-
4.13.5(Ageing test)	-	500	-
4.13.4(Hardness (IRHD))	-	2000	-
4.13.3(Density )	-	300	-
4.13.2(Thickness )	-	180	-
4.13.1(Meterial)	-	180	-
4.12(Breaking Strength of thread)	-	800	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness )	-	180	-
4.10(Toe Puff & counter stiffener thickness )	-	180	-
4.9.3(Abrasion resistance )	-	800	-
4.9.2(Water absorption & desorption )	-	630	-
4.9.1(Thickness )	-	180	-
4.8.3(Water absorption & desorption )	-	630	-
4.8.2(Abrasion )	-	800	-
4.8.1(Thickness )	-	180	-
4.7.4(Water vapour permeability & coefficent )	-	630	-
4.7.3(Abrasion resistance )	-	800	-
4.7.2(Tear Strength)	-	500	-
4.7.1(Thickness )	-	180	-
4.6.4(Water penetration and water absorption)	-	630	-
4.6.3(Water vapour permeability & coefficent )	-	630	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold insulation tester )	-	900	-
4.5.6(Heat insulation of sole complex)	-	900	-
4.5.5.1(Electrical Properties Antistatic )	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Contruction)	-	100	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-
4.1(General)	-	180	-
7(Marking)	-	150	-

19 Jul, 2027

-
-

7117

EMC Testing and Compliance LLP, Gurugram

8141526

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	900	.
8.4(Volatility & lead content )	-	800	.
8.3(Compression Resistance)	-	630	.
8.3(Impact resistance )	-	630	.
8.2(Internal Toe cap length)	-	180	.
8.1(Height of upper )	-	1080	.
8.0(Construction)	-	180	.
7.10(Ageing test)	-	2000	.
7.9(Hydrolysis)	-	2700	.
7.8(Insocks Material )	-	100	.
7.7.5(Upper / Outsole bond strength)	-	1080	.
7.7.4(Interlayer Bond Strength )	-	1080	.
7.7.3(Flexing Resistance )	-	1080	.
7.7.2(Abrasion Resistance)	-	1080	.
7.7.1(Tear Strength )	-	500	.
7.7(Hardness (IRHD))	-	300	.
7.7(Thickness)	-	180	.
7.7(Density )	-	300	.
7.6(Peel Strength )	-	1080	.
7.6(Shape retention)	-	800	.
7.6(Moisture )	-	800	.
7.6(Resilience test )	-	800	.
7.6(1st Dry collapsing load, hardness)	-	800	.
7.5(Insocks )	-	800	.
7.5(Insoles )	-	1350	.
7.5(Water abrasion & desorption)	-	630	.
7.5(Thickness )	-	180	.
7.4(Tensile Strength )	-	500	.
7.4(Abrasion Resistance)	-	1350	.
7.4(Tear Strength )	-	500	.
7.3(Flexing Resistance )	-	1500	.
7.3(Tensile Strength )	-	500	.
7.3(Thickness )	-	180	.
7.3(Water Vapour permeability & coefficient )	-	700	.
7.3(Tear Strength )	-	1080	.
7.1(Compression Tester)	-	630	.
7.1(Impact resistance)	-	630	.

19 Jul, 2027

-
-

7118

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17037 (2018)

Anti riot shoes - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	WITHOUT INNOCOUSNESS 25000 10% DISCOUNT TO BIS
4.16.2(Breaking load & lag retention)	-	1080	-
4.16.1(Length of laces )	-	180	-
4.15(D-ring and Hooks )	-	180	-
4.14.10(Resistance to fuel oil)	-	900	-
4.14.9(Resistance to hot contact)	-	800	-
4.14.8(Flex resistance)	-	2000	-
4.14.7(Abrasion resistance)	-	1080	-
4.14.6(Tear Strength)	-	500	-
4.14.5(Ageing test)	-	2000	-
4.14.4(Hardness (IRHD))	-	1500	-
4.14.3(Density )	-	180	-
4.14.2(Thickness )	-	180	-
4.14.1(Meterial)	-	180	-
4.13(Breaking Strength of thread)	-	180	-
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness)	-	180	-
4.10(Counter stiffener thickness)	-	100	-
4.9.3(Water absorption & desorption )	-	630	-
4.9.2(Abrasion resistance )	-	800	-

19 Jul, 2027

-
-

7119

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	35000	WITH INNCOUSNESS TEST 60000, WITHOUT 25000 PER SAMPLE 10% DISCOUNT TO BIS
4.16.2(Breaking Strength of lace )	-	430	-
4.16.1(Length of lace )	-	180	-
4.15(D-ring & Hooks )	-	180	-
6.1(Resistance to Fuel Oil)	-	1500	-
4.14.9(Resistance to hot contact )	-	1500	-
4.14.8(Flexing resistance )	-	900	-
4.14.7(Ageing test)	-	2500	-
4.14.6(Hardness (IRHD))	-	1080	-
4.14.5(Abrasion resistance )	-	900	-
4.14.4(Tear Strength)	-	630	-
4.14.3(Sole Density )	-	180	-
4.14.2(Thickness)	-	180	-
4.14.1(Material)	-	180	-
4.13(Breaking Strength of thread )	-	180	-
4.12.2(Tear Strength)	-	630	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	630	-
4.11.1(Thickness )	-	180	-
4.10.3(Water absorption & desorption percent)	-	2500	-
4.10.2(Abrasion resistance )	-	630	-
4.10.1(Material)	-	180	-
4.9.3(Water absorption & desorption percent)	-	2500	-
4.9.2(Abrasion resistance )	-	630	-
4.9.1(Thickness)	-	180	-
4.8(Thickness Toe puff & counter stiffener)	-	180	-
4.7.5(Water Vapour permeability & coefficient )	-	1080	-
4.7.4(Abrasion resistance )	-	630	-
4.7.3(Tear Strength)	-	900	-
4.7.2(Material Counter & Tongue)	-	180	-
4.7.1(Material vamp & Quarter)	-	180	-
4.6.3(Water Penetration and water absorption )	-	1080	-
4.6.2(Tear Strength)	-	630	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold Insulation of sole complex)	-	900	-
4.5.6(Heat Insulation of sole Complex)	-	900	-
4.5.5(Antistatic test)	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Construction)	-	180	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-

19 Jul, 2027

-
-

7120

EMC Testing and Compliance LLP, Gurugram

8141526

IS 15644 (2006)

Safety of electric toys

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	1000	-
8.0(Power Input)	-	3000	-
9.0(Heating and abnormal operation)	-	3000	-
10.0(Electrical strength at operating temperature)	-	2000	-
11.1(Moisture resistance)	-	2500	-
11.2(Resistant to humidity)	-	2500	-
12.0(Electric strength at room temperature)	-	2000	-
13.0(Mechanical strength)	-	1000	-
14.1(Construction)	-	500	-
14.2(Construction)	-	500	-
14.3(Construction)	-	500	-
14.4(Construction)	-	500	-
14.5(Construction)	-	500	-
14.6(Construction)	-	500	-
14.7(Construction)	-	500	-
14.8(Construction)	-	500	-
14.9(Construction)	-	500	-
14.1(Construction)	-	500	-
14.11(Construction)	-	500	-
14.12(Construction)	-	500	-
14.13(Construction)	-	500	-
14.14(Construction)	-	500	-
15.1(Protection of cords and wires)	-	500	-
15.2(Protection of cords and wires)	-	500	-
16.0(Components)	-	2000	-
17 Table-1(Screws and connections)	-	1000	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	1000	-
18.0(Clearance and creepage distance)	-	1000	-
19.1(Ball pressure test IEC 60695-10-2)	-	500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	500	-
19.2.2(Needle flame test)	-	1000	-
20.0(Radiation, toxicity and similar hazards)	-	2000	-
14.15(Construction)	-	500	-
14.16(Construction)	-	500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	-

19 Jul, 2027

-
-

7121

EMC Testing and Compliance LLP, Gurugram

8141526

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	900	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	100	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	100	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	100	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	100	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	100	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	100	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	180	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	180	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	2000	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1500	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	900	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	800	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	630	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	180	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	900	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	100	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	100	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	180	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	100	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	100	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	100	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	2000	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1500	-
5, 5.1(Requirement)	-	100	-
6.1(Marking)	-	180	-
6, 6.1(Packing)	-	180	-
6.2(Packing)	-	180	-

19 Jul, 2027

-
-

7122

EMC Testing and Compliance LLP, Gurugram

8141526

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

17078 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	100	-
5, 5.1(Requirements )	-	100	-
5.2, 5.2.1, 5.2.1.1(Materials - Upper Leather )	-	100	-
5.2.2(Materials - Insole Material )	-	100	-
5.2.3(Materials - Stiffener )	-	100	-
5.2.4(Materials - Lining Material )	-	100	-
5.2.5(Materials - Threads )	-	100	-
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	100	-
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	100	-
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	100	-
5.2.7(Materials - Cotton NEWAR)	-	100	-
5.2.8(Materials - Toe-Compound)	-	100	-
5.2.9(Materials - Laces)	-	100	-
5.2.10(Materials - Steel Toe Cap)	-	100	-
5.2.11.1 (Table 1)(Sole and Heel )	-	100	-
5.2.11.2(Sole and Heel )	-	100	-
5.2.11.3 (Table 2)(Sole and Heel )	-	100	-
5.2.11.4(Sole and Heel )	-	100	-
5.3 (Table 3)(Components)	-	180	-
5.4.8(Workmanship and Finish)	-	180	-
5.5, 5.5.1(Mass)	-	150	-
5.5, 5.5.2(Mass)	-	150	-
5.5, 5.5.3(Mass)	-	150	-
5.6(Performance Test)	-	630	-
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	1000	-
5.7, 5.7.2(Adhesion Test on Moulded Bottoms)	-	1000	-
7, 7.1(Marking)	-	180	-
7.1.1, 7.1.2(Marking)	-	180	-
5.7(Adhesion Test )	-	1000	-
5.6(Impact resistance )	-	630	-
5.5(Mass per pairs)	-	150	-
5.4(Construction)	-	180	-
5.3(Thickness of components )	-	180	-
5.2.11.4(Ageing Test)	-	2700	-
5.2.11.2(Mass after resistance to chemical effect)	-	150	-
5.2.11(Flexing Resistance )	-	2000	-
5.2.11(Tensile Strength )	-	500	-
5.2.11(Elongation at break)	-	500	-
5.2.11(Hardness (IRHD))	-	600	-
5.2.11(Material Sole & heel )	-	100	-
5.2.9(Length )	-	100	-
5.2.8(Toe-compound )	-	100	-
5.2.7(Width of fabric)	-	100	-
5.2.6.3(Eyelets diameter)	-	100	-
5.2.6.2(Corrosion Shanks )	-	100	-
5.2.6.1(Corrosion test Lasting tacks)	-	100	-
5.2.5(Breaking Strength )	-	500	-
5.2.5(Twist)	-	100	-
5.2.5(Count)	-	100	-
5.2.5(Composition )	-	100	-
5.2.4(Lining Material )	-	100	-
5.2.3(Peel Strength )	-	100	-
5.2.3(Moisture)	-	100	-
5.2.3(Resilience Test)	-	100	-
5.2.3(Shape Retention)	-	100	-
5.2.3(Hardness )	-	600	-
5.2.3(Dry collapsing)	-	100	-
5.2.2(Insole Material )	-	100	-
5.2(Material )	-	100	-

19 Jul, 2027

-
-

7123

EMC Testing and Compliance LLP, Gurugram

8141526

IS 13995 (1995)

Unlined moulded rubber boots - Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	100	-
5.1.6(Design)	-	100	-
5.1.5(Flexing resistance of upper)	-	1500	-
5.1.4(Resistance to dry heat ageing )	-	2000	-
5.1.3(Tear Strength)	-	500	-
5.1.2(Tensile Strength (after ageing))	-	2700	-
5.1.1(Tensile Strength (before ageing))	-	500	-
4.1(Thickness )	-	180	-
6, 6.1(Marking)	-	180	-
Cl.6, 6.1(Marking)	-	180	-

19 Jul, 2027

-
-

7124

EMC Testing and Compliance LLP, Gurugram

8141526

IS 11544 (1986)

Specification for slipper, rubber

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	180	-
3.2.5(Type of Thread)	-	180	-
3.2(Flexural endurance)	-	1500	-
3.2(Hardness after ageing)	-	600	-
3.2(Hardness (IRHD))	-	600	-
3.2(Relative density )	-	300	-
3.1(Shape & Design)	-	100	-
3.2.4(Colour fasntess to washing)	-	100	-
3.2.4(Picks per cm)	-	100	-
3.2.4(End per cm)	-	100	-
3.2.4(Mass per unit area)	-	100	-
3.2.2(Bottom Filling Material)	-	100	-
3.2.4.1(Weave of fabrics)	-	100	-
3.2.7(vulcanized process)	-	100	-
3.2.8(Workmanship and Finish -)	-	100	-
3.2.9(Preservation -)	-	100	-
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	180	-
Cl. 4, Cl. 4.1,Cl 4.2(Marking and packing)	-	180	-

19 Jul, 2027

-
-

7125

EMC Testing and Compliance LLP, Gurugram

8141526

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Materials)	-	100	-
5.2.1(Materials)	-	100	-
5.2.1.1(Materials)	-	100	-
5.2.2(Materials)	-	100	-
5.2.3(Materials)	-	100	-
5.2.4(Materials)	-	100	-
5.2.5(Materials)	-	100	-
5.2.6(Materials)	-	100	-
5.2.6.1(Materials)	-	100	-
5.2.6.2(Materials)	-	100	-
5.2.6.3(Materials)	-	100	-
5.2.7(Materials)	-	100	-
5.2.8(Materials)	-	100	-
5.2.9(Materials)	-	100	-
5.2.10(Materials)	-	100	-
5.2.11(Materials)	-	100	-
5.2.11.1(Materials)	-	100	-
5.2.11.2(Materials)	-	100	-
5.2.11.3(Materials)	-	100	-
5.3(Components)	-	180	-
5.4( Manufacture )	-	100	-
5.4.1( Manufacture )	-	100	-
5.5(Mass)	-	150	-
5.6(Performance Test)	-	630	-
5.7(Adhesion Test on Moulded Bottoms)	-	1000	-
7(MARKING)	-	180	-
5.7(Toe adhesion )	-	1000	-
5.6.(Toe Impact test)	-	1000	-
5.4(Dimension )	-	100	-
5.3 & 5.4.2(Thickness of components )	-	100	-
5.2.11.2(Flexing resistance)	-	1200	-
5.2.11.2(Elongation at break)	-	500	-
5.2.11.2(Tensile Strength)	-	500	-
5.2.11.2(Hardness (Shore A))	-	300	-
5.2.11(Hardness (IRHD)-after ageing)	-	300	-
5.2.11(Flexing resistance)	-	2000	-
5.2.11(Elongation at break)	-	500	-
5.2.11(Tensile Strength)	-	509	-
5.2.11(Relative density )	-	300	-
5.2.11(Hardness (IRHD))	-	500	-
5.3(Components)	-	100	-
5.5(Mass)	-	500	-
5.6.(Toe Impact test)	-	630	-
5.3 & 5.4.2(Thickness of components )	-	180	-
5.2.11(Tensile Strength)	-	500	-
5.2.11(Hardness (IRHD))	-	300	-
5.1(REQUIREMENTS)	-	100	-
5.2.11.2(Resistance to Fuel Oil)	-	300	-
5.4.8(Workmanship and Finish)	-	100	-

19 Jul, 2027

-
-

7126

EMC Testing and Compliance LLP, Gurugram

8141526

IS 6719 (1972)

Solid Pvc Soles And Heels

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	600	-
3.6 (vi)(Lead (as Pb) ppm)	-	990	-
3.6 (v)(Volatility, percent by means )	-	800	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	500	-
3.6 (iii)(Elongation at break, percent )	-	500	-
3.6 (ii)(Tensile Strength )	-	500	-
3.6 (i)(Relative density )	-	300	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	150	-
Cl. 6.4(Measurement of thickness)	-	500	-

19 Jul, 2027

-
-

7127

EMC Testing and Compliance LLP, Gurugram

8141526

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Size & Thickness )	-	180	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	150	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	300	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	300	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	2300	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	700	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	630	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	1200	-
5, 5.1(Marking)	-	180	-
6, 6.1(Packing)	-	180	-

19 Jul, 2027

-
-

7128

EMC Testing and Compliance LLP, Gurugram

8141526

IS 15844 (2010)

Sports Footwear Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.11(Corrosion resistance)	-	700	-
3.10(Ross Flex test)	-	1000	-
3.10(Collapsing load )	-	800	-
3.10(Crush load )	-	500	-
3.9(Lace abrasion test)	-	800	-
3.9(Griping Strength of Tags)	-	500	-
3.9(Colour migration / Colour fastness)	-	300	-
3.9(Breaking Strength )	-	500	-
3.8(Heat resistance tester )	-	500	-
3.8(Compression set )	-	1000	-
3.8(Die-C tear Strength )	-	500	-
3.8(Elongation at Break )	-	500	-
3.8(Tensile Strength)	-	500	-
3.7(Flexing index)	-	500	-
3.7(Abrasion resistance )	-	800	-
3.7(Water absorption & loss percent )	-	630	-
3.7(Tensile Strength)	-	500	-
3.6(Ross flexing )	-	2000	-
3.6(Adhesion to mid sole )	-	800	-
3.6(Abrasion resistance )	-	1080	-
3.6(Die-C tear Strength )	-	500	-
3.6(Trouser tear strength )	-	500	-
3.5(Heat resistance tester )	-	500	-
3.5(Adhesive to sole)	-	800	-
3.5(Compression set )	-	1000	-
3.5(Die-C tear Strength )	-	500	-
3.5(Split tear strength )	-	500	-
3.5(Elongation at Break )	-	500	-
3.5(Tensile Strength)	-	500	-
3.4(Colorfastness to light )	-	300	-
3.4(Colour fastness to crocking )	-	300	-
3.4(Tear Strength)	-	500	-
3.4(Elongation at Break )	-	500	-
3.4(Tensile Strength)	-	500	-
3.4(Adhesive Strength )	-	800	-
3.4(Hydrolysis )	-	1000	-
3.4(Upper flexing resistance )	-	1000	-
3.3.4(Energy absorption of seat region )	-	630	-
3.3.3(Sole /midsole bond strength )	-	800	-
3.3.2(Upper/outsole bond strength)	-	800	-
3.3.1(Contruction)	-	100	-
3.2.3 & 3.2.4(Visual )	-	100	-
3.2.1(Design )	-	100	-
Cl. 3.6,Table 7,IS 3400(Part 17), iv)(Tear strength, kg/cm, Min)	-	500	-
Cl. 3.4,Table 3(Lastometer test, mm, Min)	-	500	-

19 Jul, 2027

-
-

7129

EMC Testing and Compliance LLP, Gurugram

8141526

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	100	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	600	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	500	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	150	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	1350	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	1000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	500	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	630	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	500	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	500	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	100	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	100	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	500	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	800	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	500	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	1350	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	1350	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	500	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	500	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	630	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	1350	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	1000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	100	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	500	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	1350	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	800	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	100	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	600	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	1000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	180	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	100	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	100	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	180	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	500	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	800	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	100	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	100	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	100	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	100	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	100	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	100	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	150	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	180	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	630	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	800	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	800	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	800	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	630	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	180	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	1080	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	1080	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	800	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	2700	-
5.2.4(Reinforcing Material)	-	100	-
5.2.8.4(Colour of the lace)	-	100	-
Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4)	-	100	-
8(CHEMICAL REQUIREMENTS)	-	4450	-
10(Marking)	-	180	-
11(PACKING)	-	180	-

19 Jul, 2027

-
-

7130

EMC Testing and Compliance LLP, Gurugram

8141526

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	500	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	1000	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	500	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	500	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	500	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	500	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	1000	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	500	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	500	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	500	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	1000	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	500	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	500	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	500	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	500	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	500	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	500	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	500	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	500	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	500	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	500	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	500	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	500	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	500	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	500	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	500	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	500	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	500	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	-

19 Jul, 2027

-
-

7131

EMC Testing and Compliance LLP, Gurugram

8141526

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Electric Toys and Non-Electric toys (all ranges)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	10% discount for BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	2000	10% discount for BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	2000	10% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	10% discount for BIS
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	10% discount for BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	2000	10% discount for BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	10% discount for BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	2000	10% discount for BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	10% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	10% discount for BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	2000	10% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	10% discount for BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	2000	10% discount for BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	10% discount for BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	10% discount for BIS
4.1(General)	-	200	10% discount for BIS

19 Jul, 2027

-
-

7132

EMC Testing and Compliance LLP, Gurugram

8141526

IS 798 (2020)

Orthophosphoric Acid — Specification ( Third Revision )

Orthophosphoric Acid (Any Grade)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	2000	-
5.2.2 Table 1 (i)(Relative density )	-	2000	-
5.2.2 Table 1 (ii)(Orthophosphoric acid (H3 PO4 ))	-	2000	-
5.2.2 Table 1 (iii)(Iron (as Fe), )	-	2000	-
5.2.2 Table 1 (iv)(Chlorides (as Cl), )	-	2000	-
5.2.2 Table 1 (v)(Sulphates (as SO4 ), )	-	2000	-
5.2.2 Table 1 (vi)(Arsenic (as As2 O3 ), )	-	2000	-
5.2.2 Table 1 (vii)(Antimony (as Sb2 O3 ), )	-	2000	-
5.2.2 Table 1 (viii)(Nitrates (as NO3 ),)	-	2000	-
5.2.2 Table 1 (ix)(Lead (as Pb), parts per million, Max)	-	2000	-
5.2.2 Table 1 (x)(Silica (as SiO2 ), )	-	2000	-
5.2.2 Table 1 (xi)(Calcium (as Ca) and Magnesium (as Mg), )	-	2000	-
5.2.2 Table 1 (xii)(Oxygen absorbed (as O),)	-	2000	-
5.2.2 Table 1 (xiii)(Volatile acids)	-	2000	-
5.2.2 Table 1 (xiv)(Manganese (as Mn), )	-	2000	-
5.2.2 Table 1 (xv)(Molybdenum (as Mo), )	-	2000	-
5.2.2 Table 1 (xvi)(Mercury (as Hg), )	-	2000	-
5.2.2 Table 1 (xvii)(Aluminium (as Al), )	-	2000	-

19 Jul, 2027

-
-

7133

EMC Testing and Compliance LLP, Gurugram

8141526

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

---

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	10000	-
15(Moisture Resistance, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	5000	-
19.1(Abnormal Operation, IS 302-1)	-	0	-
19.7(Abnormal Operation, IS 302-1)	-	0	-
19.8(Abnormal Operation, IS 302-1)	-	0	-
19.9(Abnormal Operation, IS 302-1)	-	0	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	3000	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	3000	-
19.11.4.4(Surge immunity test)	-	3000	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	3000	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	5000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-

19 Jul, 2027

-
Exclusion Cl 19.11.4.2 to Cl 19.11.4.7

7134

EMC Testing and Compliance LLP, Gurugram

8141526

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	180	-
4(Marking)	-	180	-
7(Design)	-	100	-
8(a) Upper Leather)	-	500	-
8(b) Lining Leather)	-	500	-
8(c) Bottom Material)	-	500	-
8(d) Steel Toe Cap)	-	500	-
8(e) Tape)	-	500	-
8(f) Bottom Filling)	-	500	-
8(g) Eyelet)	-	500	-
8(h) Toe Compound)	-	500	-
8(i) Threads)	-	500	-
8(j) Rivets)	-	500	-
8(k) Screw Wire)	-	500	-
8(l) Heel Pin)	-	500	-
8(m) Shank)	-	500	-
8(n) Laces)	-	500	-
8(o) Tongue Lining)	-	500	-
8(p) Adhesive)	-	500	-
8(q) Strengthening Piece)	-	500	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	500	-
10(Finish)	-	500	-
11(a) Boots with Leather Sole and Heel)	-	150	-
11(b) Boots with Rubber Sole and Heel)	-	150	-
12(Performance Test)	-	630	-
13(Design)	-	100	-
14(a) Upper Leather)	-	100	-
14(b) Lining Leather)	-	100	-
14(c) Bottom Material)	-	100	-
14(d) Steel Toe Cap)	-	100	-
14(e) Tape)	-	100	-
14(f) Bottom Filling)	-	100	-
14(g) Eyelet)	-	100	-
14(h) Toe Compound)	-	100	-
14(i) Threads)	-	100	-
14(j) Rivets)	-	100	-
14(k) Screw Wire)	-	100	-
14(l) Heel Pin)	-	100	-
14(m) Shank)	-	100	-
14(n) Laces)	-	100	-
14(o) Tongue Lining)	-	100	-
14(p) Adhesive)	-	100	-
14(q) Leather Components)	-	100	-
15(Manufacture)	-	100	-
16(Finish)	-	500	-
17(a) Shoes with Leather Sole and Heel)	-	150	-
17(b) Shoes with Rubber Sole and Heel)	-	150	-
18(Performance Test)	-	630	-

19 Jul, 2027

-
-

7135

EMC Testing and Compliance LLP, Gurugram

8141526

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

Leather Safety Boots and Shoes

10328 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 (a)(Marking)	-	500	-
4.1 (b)(Marking)	-	500	-
4.1 (c)(Marking)	-	500	-
4.1 (d)(Marking)	-	500	-
4.1 (e)(Marking)	-	500	-
7.1(Design)	-	500	-
4.1 (a)(Marking)	-	500	-
4.1 (b)(Marking)	-	500	-
4.1 (c)(Marking)	-	500	-
4.1 (d)(Marking)	-	500	-
4.1 (e)(Marking)	-	500	-
7.1(Design)	-	1000	-
10.1(Finish)	-	2000	-
10.3(Finish)	-	2000	-
10.4(Finish)	-	2000	-
11.1(Mass Boots with Leather Sole and Heel)	-	2000	-
12(Performance test)	-	5000	-

19 Jul, 2027

-
-

7136

EMC Testing and Compliance LLP, Gurugram

8141526

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	5 % Discount for BIS
8(Terminals)	-	2000	5 % Discount for BIS
9(PROVISION FOR EARTHING)	-	2000	5 % Discount for BIS
10(Protection against accidental contact with live parts)	-	2000	5 % Discount for BIS
11(Mositure Resistance and Insulation)	-	10000	5 % Discount for BIS
12(Electric Strength)	-	2000	5 % Discount for BIS
13(Fault conditions)	-	2000	5 % Discount for BIS
15(Construction)	-	2000	5 % Discount for BIS
16(Creepage distance and clearances)	-	2000	5 % Discount for BIS
17(Screws, current carrying parts and connections)	-	2000	5 % Discount for BIS
18(Resistance to heat, fire and tracking)	-	2000	5 % Discount for BIS
19(Resistance to corrosion)	-	5000	5 % Discount for BIS
21(Heat management)	-	1000	5 % Discount for BIS

19 Jul, 2027

-
-

7137

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6(Marking)	-	1000	5 % Discount for BIS
7(Construction)	-	2000	5 % Discount for BIS
8(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9(Provision for earthing)	-	2000	5 % Discount for BIS
10(Terminals)	-	2000	5 % Discount for BIS
11(External & Internal Wiring)	-	2000	5 % Discount for BIS
12(Protection against electric shock)	-	2000	5 % Discount for BIS
13(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14(Resistance to Dust and Moisture)	-	10000	5 % Discount for BIS
15(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS
17(Photometric Test)	-	0	5 % Discount for BIS

19 Jul, 2027

-
-

7138

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6.0(Marking)	-	1000	5 % Discount for BIS
7.0(Construction)	-	2000	5 % Discount for BIS
8.0(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9.0(Provision for earthing)	-	2000	5 % Discount for BIS
10.0(Terminals)	-	2000	5 % Discount for BIS
11.0(External & Internal Wiring)	-	2000	5 % Discount for BIS
12.0(Protection against electric shock)	-	2000	5 % Discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5 % Discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS
17.0(Photometric Test)	-	0	5 % Discount for BIS

19 Jul, 2027

-
-

7139

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	500	5 % Discount for BIS
5(Classification of Luminaires')	-	500	5 % Discount for BIS
6.0(Marking)	-	1000	5 % Discount for BIS
7.0(Construction)	-	500	5 % Discount for BIS
8.0(Creepage Distance and Clearances)	-	2000	5 % Discount for BIS
9.0(Provision for earthing)	-	2000	5 % Discount for BIS
10.0(Terminals)	-	2000	5 % Discount for BIS
11.0(External & Internal Wiring)	-	2000	5 % Discount for BIS
12.0(Protection against electric shock)	-	2000	5 % Discount for BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	5 % Discount for BIS
14.0(Resistance to Dust & Moisture)	-	10000	5 % Discount for BIS
15.0(Insulation Resistance and Electric Strength)	-	5000	5 % Discount for BIS
16.0(Resistance to Heat , fire and tracking)	-	2000	5 % Discount for BIS

19 Jul, 2027

-
-

7140

EMC Testing and Compliance LLP, Gurugram

8141526

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

Electric Toys and Non-Electric toys (all ranges)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	10% Discount for BIS samples

19 Jul, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number