BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15623 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7141

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	200	5 % DISCOUNT to BIS Sample only Basic Test Charges Rs.39000.00 Additional Parameter Rs. 6450.00 as whole Individual additional parameter as per clausewise RATE
6(Sizes and Fittines)	-	500	-
7(Consturction)	-	200	-
8.1(Lining Material)	-	500	-
8.2, Table-1 (i)(Width, mm, Min)	-	150	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	500	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	1000	-
8.4(Use of Rubber material)	-	500	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	250	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	750	-
8.5(Upper material)	-	500	-
8.5.1(Tensile Strength of upper)	-	500	-
8.5.2(Thickness)	-	250	-
8.5.3(Flexing Resistance)	-	1000	-
8.5.4(Abrasion Resistance)	-	800	-
8.6.1(Thickness of Outsole)	-	250	-
8.6.2(Tear Strength)	-	500	-
8.6.3(Abrasion Resistance of Outsole)	-	800	-
8.6.4(Flexing Resistance)	-	800	-
8.6.5(Inter layer Bond Strength of outsole)	-	600	-
Cl-8.7(Insocks material)	-	500	-
8.7.1(Thickness of Insocks)	-	250	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	1200	-
Cl-8.8.1(Outsole/Heel)	-	200	-
Cl-8.9(Leak Proof Test)	-	400	-
8.10(Height of Upper)	-	300	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	500	-
Cl-8.12(Upper Outsole Bond Strength)	-	600	-
Cl-8.13(Internal Length of Toe Cap)	-	200	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	600	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	600	-
8.16(Banned Chemicals)	-	20000	Chemical -Innocuousness Test- Rs 20000.00
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	1500	-
8.17(Steel Floor with Glycerine)	-	1500	-
8.18(Corrosion Resistant Test for Toe Caps)	-	500	-
9.1(Penetration Resistance)	-	500	-
9.2(Antistatic Footwear)	-	1000	-
9.3(Flame Resistance Property)	-	750	-
9.4(Electrical Resistance)	-	1000	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	600	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	2000	-
9.6(Resistance to Fuel Oil)	-	600	-
11.2(Marking)	-	0	-

20 Jan, 2028

-
Included w.e.f 13.05.2025

7142

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	500	-
5(PROFILE)	-	500	-
7.2(WIDTH)	-	500	-
7.3(LENGTH)	-	500	-
7.4(SQUARENESS)	-	500	-
7.5(Depth and Pitch of the Corrugation)	-	500	-
8(FINISH)	-	500	-
6(MATERIAL)	-	7500	-
3(FREEDOM FROM DEFECTS)	-	1000	-
5(PROFILE)	-	500	-
7.2(WIDTH)	-	500	-
7.3(LENGTH)	-	500	-
7.4(SQUARENESS)	-	500	-
7.5(Depth and Pitch of the Corrugation)	-	500	-
8(FINISH)	-	500	-
6(MATERIAL)	-	7500	-

-
Included w.e.f 18.06.2025

7143

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	500	-
9, Table 1, i)(Aluminium, Min)	-	500	-
9, Table 1, ii)(Silicon)	-	500	-
9, Table 1, iii)(Iron)	-	500	-
9, Table 1, iv)(Copper)	-	500	-
9, Table 1, v)(Manganese)	-	500	-
9, Table 1, vi)(Magnesium)	-	500	-
9, Table 1, vii)(Chromium)	-	500	-
9, Table 1, ix)(Titanium)	-	500	-
9, Table 1, x)(Boron)	-	500	-
9, Table 1, xi)(Gallium)	-	500	-
9, Table 1, xii)(Zirconium)	-	500	-
9, Table 1, xiii)(Titanium + Vanadium)	-	500	-
9, Table 1, xiv)(Other elements (each))	-	500	-
9, Table 1, xv)(Other elements (Total))	-	500	-
9, Table 1, viii)(Zinc)	-	500	-

-
Included w.e.f 18.06.2025

7144

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1, Table-2 (i)(Silicon)	-	300	-
Cl-7.1, Table-2 (ii)(Iron)	-	300	-
Cl-7.1, Table-2 (iii)(Copper)	-	300	-
Cl-7.1, Table-2 (iv)(Manganese)	-	300	-
Cl-7.1, Table-2 (v)(Magnesium)	-	300	-
Cl-7.1, Table-2 (vi)(Chromium)	-	300	-
Cl-7.1, Table-2 (vii)(Zinc)	-	300	-
Cl-7.1, Table-2 (viii)(Boron)	-	300	-
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	300	-
Cl-7.1, Table-2 (x)(Other each)	-	300	-
Cl-7.1, Table-2 (xi)(Others total)	-	300	-
Cl-7.1, Table-2 (xii)(Aluminium)	-	300	-
Cl-8.1, Table-3(UTS (MPa))	-	1000	-
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	800	-
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	1500	-
Cl-8.1, Table-3(Conductivity (%) (IACS))	-	1000	-
Cl-9(Electrical resistivity)	-	1000	-
Cl-10(Diameter and Permissible Variations)	-	500	-
Cl-12(Finish and freedom from defects)	-	500	-

-
Included w.e.f 18.06.2025

7145

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 18316 (2023)

HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.0(Carbon)	-	1000	-
Clause. 7.0(Silicon)	-	1000	-
Clause. 7.0(Sulphur)	-	1000	-
Clause. 7.0(Phosphorus)	-	1000	-
Clause. 7.0(Manganese)	-	1000	-
Clause. 7.0(Aluminium)	-	1000	-
Clause.8.0(Freedom From Defects)	-	1000	-
Clause.9.0(Dimensions, Shape & Tolerances (for Hot-rolled Steel))	-	1000	-
Clause.10.0(Dimensions, Shape & Tolerances (for Cold-rolled Steel))	-	1000	-

-
Included w.e.f 18.06.2025

7146

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Freedom from defects)	-	500	-
7.0(Dimension and Tolerances)	-	1000	-
8.1 Table-1(Al)	-	500	-
8.1 Table-1(Cu)	-	500	-
8.1 Table-1(Mg)	-	500	-
8.1 Table-1(Si)	-	500	-
8.1 Table-1(Fe)	-	500	-
8.1 Table-1(Mn)	-	500	-
8.1 Table-1(Zn)	-	500	-
8.1 Table-1(Ti)	-	500	-
8.1 Table-1(Cr)	-	500	-
9.1(Tensile Strength)	-	1000	-
9.3(Wrapping Test)	-	1500	-
10(Selection of Test Samples)	-	500	-

-
Included w.e.f 18.06.2025

7147

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	2500	-
5.1 table 2(0.2% proof strength)	-	1000	-
5.1 table 2(Tensile strength)	-	1000	-
5.1 table 2(Elongation)	-	1000	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
4.1(Freedom from defects)	-	500	-
9.1(Tensile test)	-	1500	-

-
Included w.e.f 18.06.2025

7148

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 4320 (2024)

Thiram technical - Specification Second Revision

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 4320:2024)	-	1000	30% Discount
3.2, 7.1, Table 1 (i)(Bis (dimethylthiocarbamoyl) disulphide - IS 4320:2024)	-	5000	30% Discount
3.2, 7.1, Table 1 (ii)(Loss on drying at 60°C -- IS 4320:2024)	-	2000	30% Discount
3.2, 7.1, Table 1 (iii)(Ash content - IS 4320:2024)	-	2000	30% Discount

31 Dec, 2026

-
Included .w.e.f.02.07.2025

7149

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Grades)	-	2500	-
6.1(Chemical composition )	-	2500	-
7.1(Shapes and sizes)	-	500	-
Table-1, Clause - 6.1.1(Copper)	-	500	-
Table-1, Clause - 6.1.1(Iron)	-	500	-
Table-1, Clause - 6.1.1(Magnesium)	-	500	-
Table-1, Clause - 6.1.1(Manganese)	-	500	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Silicon)	-	500	-
Table-1, Clause - 6.1.1(Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Zinc)	-	500	-
Table-1, Clause - 6.1.1(Other elements (each))	-	500	-
Table-1, Clause - 6.1.1(Others Total)	-	500	-
Table-1, Clause - 6.1.1(Aluminium)	-	500	-

-
Included w.e.f 18.06.2025

7150

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS/IEC 60947 : PART 4 : Sec 3 (2020)

Low-Voltage Switchgear And Controlgear: Part 4-3 Contactors And Motor-Starters Semiconductor Controllers And Semiconductor Contactors For Non-Motor Loads

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.4.2.1(Test sequence V : Electrostatic discharges)	-	70000	-
9.4.2.3(Test sequence V : Fast transients (5/50 ns))	-	90000	-
9.4.2.4(Test sequence V : Surges (1,2/50 µs-8/20 µs))	-	90000	-
9.4.2.6(Test sequence V : Voltage dips and short-time interruptions)	-	70000	-
9.4.3.1(Test sequence V :Conducted radio-frequency emission test)	-	90000	-
9.4.3.3(Test sequence V : Low frequency emission test)	-	90000	-

05 Apr, 2027

-
Included w.e.f 27.02.2025 Only Test sequence V except 9.4.2.2 Radio-frequency electromagnetic field, 9.4.3.2 Radiated radio-frequency emission test

7151

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

14150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	200	-
4.1.2(Sack Width)	-	200	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	400	-
4.1.4(Patch Length)	-	400	-
4.1.5(Patch Height)	-	400	-
4.1.6(Length of Valve)	-	200	-
4.1.7(Width of Valve Sleeve)	-	200	-
4.1.8(Length of Valve Sleeve)	-	200	-
5.1(Raw Material)	-	500	-
5.2(Fabric)	-	450	-
5.2(Tape density and width)	-	650	-
5.4(Lamination for PP)	-	450	-
5.4(Lamination for LDPE)	-	200	-
6.1(Mass of Bale)	-	2700	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	900	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1600	-
6.3(Drop Impact Testing of Filled Sacks)	-	3000	-
6.4(Ash Content)	-	650	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-
Cl-5.6(Capacity)	-	550	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	150	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	150	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	-
4.1.1(Sack Length)	-	0	-
4.1.2(Sack Width)	-	0	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	0	-
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	0	-
4.1.7(Width of Valve Sleeve)	-	0	-
4.1.8(Length of Valve Sleeve)	-	0	-
5.1(Raw Material)	-	0	-
5.2(Fabric)	-	0	-
5.2(Tape density and width)	-	0	-
5.4(Lamination for PP)	-	0	-
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	0	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	0	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	0	-
6.3(Drop Impact Testing of Filled Sacks)	-	0	-
6.4(Ash Content)	-	0	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-
Cl-5.6(Capacity)	-	0	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	0	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	0	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	-

-
Included w.e.f 04.03.2025 Exclusion: Cl 6.5 (Air Permeability)

7152

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	1200	-
Cl 9(Press)	-	800	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 8 & Table 3(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 8 & Table 3(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.1(Carbon %)	-	300	-
7.1(Manganese %)	-	300	-
7.1(Phosphorus %)	-	300	-
7.1(Sulphur %)	-	300	-
7.1( Copper %)	-	300	-
7.1(Silicon %)	-	300	-
7.1( Aluminium %)	-	300	-
7.1( Nb)	-	300	-
7.1(V)	-	300	-
7.1( Ti)	-	300	-
7.1(Cr)	-	300	-
7.1(Ni)	-	300	-
7.1( Nitrogen%)	-	300	-
7.1(CE)	-	300	-
7.1(Manganese %)	-	300	-
7.1(Phosphorus %)	-	300	-
7.1(Sulphur %)	-	300	-
7.1(Silicon %)	-	300	-
7.1( Copper %)	-	300	-
7.1( Aluminium %)	-	300	-
7.1( Nb)	-	300	-
7.1(V)	-	300	-
7.1( Ti)	-	300	-
7.1(Cr)	-	300	-
7.1(Mo)	-	300	-
7.1(Ni)	-	300	-
7.1( Nitrogen%)	-	300	-
7.1(CE)	-	300	-
7.1(Carbon %)	-	300	-
7.1(Manganese %)	-	300	-
7.1(Phosphorus %)	-	300	-
7.1(Sulphur %)	-	300	-
7.1(Silicon %)	-	300	-
7.1( Copper %)	-	300	-
7.1( Aluminium %)	-	300	-
7.1( Nb)	-	300	-
7.1(V)	-	300	-
7.1( Ti)	-	300	-
7.1(Cr)	-	300	-
7.1(Mo)	-	300	-
7.1(Ni)	-	300	-
7.1( Nitrogen%)	-	300	-
7.1(CE)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	300	-
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	300	-
Cl. 14(Weight)	-	300	-
Cl. 12, 13(Camber)	-	300	-
Cl. 12, 13(Thickness)	-	300	-
Cl. 8, Table 3(Elongation)	-	300	-
Cl. 8, Table 3(Yield Stress)	-	1000	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 9(Press)	-	500	-
Cl 8 & Table 3(UTM)	-	1200	-
Cl 8 & Table 3(UTM)	-	1200	-
Cl 9(Press)	-	1200	-
Cl 11(Workmanship)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
7.0 (7)(Micro Alloying elements - IS:8811)	-	500	-
8.0 (1)(Tensile Strength-IS:1608(P1))	-	500	-
8.0 (2)(Yield Strength-IS:1608(P1))	-	500	-
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	500	-
12 (1)(Width - SOP MT-23)	-	500	-
12 (2)(Thickness- SOP MT-23)	-	500	-
12 (3)(Mass of Strip- SOP MT-23)	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	-
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	-
9(Protective Treatment)	-	500	-
7.1(Mo)	-	500	-
7.1(Carbon %)	-	500	-

-
Included w.e.f 18.06.2025

7153

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 6444 (2023)

Sulphur Dusting Powders - Specification second revision

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 6444:2023)	-	1000	30% discount
3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 6444:2023)	-	5000	30% discount
3.2 Table 1 (ii)(Material passing through 75 micron IS Sieve - IS 6940:1982)	-	2000	30% discount
3.2 Table 1 (iii)(Bulk Density after compacting - IS 6940:1982)	-	2000	30% discount

31 Dec, 2026

-
Included w.e.f.02.07.2025

7154

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 12145 (1987)

Specification for quenched and tempered alloy steel forgings for pressure vessels

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Shape dimension and tolerence)	-	500	-
7(Appearance)	-	500	-
6.1Table4 9.2.1(Impact test,Individual value)	-	3500	-
6.1Table4 9.2.1(Impact test,Mean of three test pieces)	-	3500	-
6.1Table4 9.2.1(Reduction in area,Min )	-	500	-
6.1Table4 9.2.1(Yield strength, Min)	-	1000	-
6.1Table4 9.2.1(Yield strength)	-	1000	-
6.1Table4 9.2.2(Tensile Strength,)	-	1000	-
6.1Table4 9.2.1(MECHANICAL PROPERTIES OF STEEL FORGINGS )	-	3000	-
Clause 5.1(Vanadium)	-	250	-
Clause 5.1(Molybdenum)	-	300	-
Clause 5.1(Chromium)	-	300	-
Clause 5.1(Nickel)	-	300	-
Clause 5.1(Silicon)	-	300	-
Clause 5.1(Phosphorous)	-	300	-
Clause 5.1(Sulphur)	-	300	-
Clause 5.1 (Manganese)	-	300	-
Clause 5.1 (Carbon)	-	300	-
Cl. 5(Carbon)	-	300	-
Cl. 5(Carbon)	-	300	-
Cl. 5(Silicon)	-	300	-
Cl. 5(Manganese)	-	300	-
Cl. 5(Nickel)	-	300	-
Cl. 5(Chromium)	-	300	-
Cl. 5(Molybdenum)	-	300	-
Cl. 5(Vanadium)	-	300	-
Cl. 5(Sulphur)	-	300	-
Cl. 5(Phosphorous)	-	300	-

-
Included w.e.f 18.06.2025

7155

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14286 : Part 1 (2023)

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements (Third Revision)

1800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Visual inspection (MQT 01))	-	10000	-
4.2(Maximum power determination (MQT 02))	-	100000	-
4.3(Insulation test (MQT 03))	-	100000	-
4.4(Measurement of temperature coefficients (MQT 04))	-	100000	-
4.5(Placeholder section, formerly NMOT)	-	10000	-
4.6(Performance at STC (MQT 06.1))	-	100000	-
4.7(Performance at low irradiance (MQT 07))	-	100000	-
4.8(Outdoor exposure test (MQT 08))	-	100000	-
4.9(Hot-spot endurance test (MQT 09))	-	100000	-
4.10(UV preconditioning test (MQT 10))	-	100000	-
4.11(Thermal cycling test (MQT 11))	-	100000	-
4.12(2 Humidity-freeze test (MQT 12))	-	100000	-
4.13(Damp heat test (MQT 13))	-	100000	-
4.14(Robustness of terminations (MQT 14))	-	100000	-
4.15(5 Wet leakage current test (MQT 15))	-	100000	-
4.16(Static mechanical load test (MQT 16))	-	100000	-
4.17(Hail test (MQT 17))	-	100000	-
4.18(Bypass diode testing (MQT 18))	-	100000	-
4.19(Stabilization (MQT 19))	-	100000	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	100000	-
4.21(Potential induced degradation test (MQT 21))	-	100000	-
4.22(Bending test (MQT 22))	-	100000	-

-
Included w.e.f 04.03.2025

7156

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(xi) External dia. of bulb D2 )	-	200	-
5.4(xii) External dia. of delivery tube D3 )	-	200	-
5.5(Delivery Time)	-	200	-
5.5(Delivery Time)	-	200	-
4.1(Nominal capacities)	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(xi) External dia. of bulb D2 )	-	200	-
5.4(xii) External dia. of delivery tube D3 )	-	200	-
5.5(Delivery Time)	-	200	-
5.5(Delivery Time)	-	200	-
5.6&7(Graduation line & Visibility )	-	200	-
4.1(Nominal capacities)	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	200	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	200	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	200	-
5.4(iv) Wall thickness)	-	200	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	200	-
5.4(b) Other pipettes)	-	200	-
5.4(vii) Overall length, L)	-	200	-
5.4(viii) Length of suction tube, L1 )	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(xi) External dia. of bulb D2 )	-	200	-
5.4(xii) External dia. of delivery tube D3 )	-	200	-
5.5(Delivery Time)	-	200	-
5.5(Delivery Time)	-	200	-
4.1(unit of volume)	-	200	-
4.2(delivery volume)	-	200	-
4.3(reference temperature)	-	200	-
Clause- 6.0(Maximum Permissible error)	-	200	-
7.4(Dimensions)	-	200	-
7.5(Top of Pipette)	-	200	-
7.8(Waiting Time)	-	200	-
7.7(Delivery Time)	-	200	-
Clause- 9.0(Setting of the Meniscus)	-	200	-
5.4(ix) Length of delivery tube, L2 )	-	200	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
4.1(Nominal capacities)	-	0	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
4.1(Nominal capacities)	-	0	-
5.4(i) Distance of graduation line from top of pipette.)	-	0	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	0	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	0	-
5.4(iv) Wall thickness)	-	0	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	0	-
5.4(b) Other pipettes)	-	0	-
5.4(vii) Overall length, L)	-	0	-
5.4(viii) Length of suction tube, L1 )	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-
5.4(xi) External dia. of bulb D2 )	-	0	-
5.4(xii) External dia. of delivery tube D3 )	-	0	-
5.5(Delivery Time)	-	0	-
5.5(Delivery Time)	-	0	-
4.1(unit of volume)	-	0	-
4.2(delivery volume)	-	0	-
4.3(reference temperature)	-	0	-
Clause- 6.0(Maximum Permissible error)	-	0	-
7.4(Dimensions)	-	0	-
7.5(Top of Pipette)	-	0	-
7.8(Waiting Time)	-	0	-
7.7(Delivery Time)	-	0	-
Clause- 9.0(Setting of the Meniscus)	-	0	-
5.4(ix) Length of delivery tube, L2 )	-	0	-

-
Included w.e.f 22.07.2025

7157

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1000	-
Cl 8(Workmanship)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1000	-
Cl 8(Workmanship)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1000	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Silicon %)	-	250	-
6.1( Copper %)	-	250	-
6.1( Aluminium %)	-	250	-
6.1( Nb)	-	250	-
6.1(V)	-	250	-
6.1( Ti)	-	250	-
6.1(Boron)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1(Microalloying)	-	250	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Silicon %)	-	250	-
6.1( Copper %)	-	250	-
6.1( Aluminium %)	-	250	-
6.1( Nb)	-	250	-
6.1(V)	-	250	-
6.1( Ti)	-	250	-
6.1(Boron)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1(Microalloying)	-	250	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Silicon %)	-	250	-
6.1( Copper %)	-	250	-
6.1( Aluminium %)	-	250	-
6.1( Nb)	-	250	-
6.1(V)	-	250	-
6.1( Ti)	-	250	-
6.1(Boron)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1(Microalloying)	-	250	-
Cl. 10(Weight)	-	250	-
Cl. 9.3(Crown)	-	250	-
Cl.9.3.1(Difference in Thickness)	-	250	-
Cl. 9.5(Edge Camber)	-	250	-
Cl.9(Thickness)	-	250	-
Cl.9(Width)	-	250	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	-
Cl 8(Workmanship)	-	250	-
Cl 8(Workmanship)	-	250	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	500	-

-
Included w.e.f 02.06.2025

7158

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 12594 (1988)

Hot - Dip zinc coating on structural steel bars for concrete reinforcement - Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 , Table 1(Mass of Zinc coating , IS 6745)	-	1500	-
5.2(Freedom from defects , IS 2629)	-	1000	-
5.3(Adhesion of Galvanized coating)	-	500	-
5,5.4.1,5.4.2(Chromating)	-	1000	-
5.1 , Table 1(Mass of Zinc coating , IS 6745)	-	1000	-
5.3(Adhesion of Galvanized coating)	-	1000	-
5,5.4.1,5.4.2(Chromating)	-	1000	-
Clause - 4, 4.1(CARBON)	-	1000	-
Clause - 4, 4.1(SULPHUR)	-	500	-
Clause - 4, 4.1(PHOSPHURS)	-	500	-
Clause - 4, 4.1(MANGANESE)	-	500	-
Clause - 4, 4.1(NITROGEN)	-	500	-
Clause - 4, 4.1(SILICON)	-	500	-
Clause - 4, 4.1(ALUMINIUM)	-	500	-
8,8.1(Supplementary requirements of galvanized coating --Sheared End)	-	500	-
8,8.2(Supplementary requirements of galvanized coating --Damaged coating)	-	500	-
8,8.1(Supplementary requirements of galvanized coating --Sheared End)	-	500	-
8,8.2(Supplementary requirements of galvanized coating --Damaged coating)	-	500	-
5.2(Freedom from defects , IS 2629)	-	500	-

-
Included w.e.f 21.05.2025

7159

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33/43/53/43-S/53-S

39625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio. Our current testing charges
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio. Our current testing charges
6.1 Table-2 iii.(Insoluble residue)	-	2340	Our current testing charges
6.1 Table-2 iv(Magnesia)	-	3040	Our current testing charges
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	2340	Our current testing charges
6.1 Table-2 vi(Loss on ignition)	-	1180	Our current testing charges
6.1 Table-2 vii(Chloride content)	-	2340	Our current testing charges
6.1 Table-2 viii(Alkali content)	-	1950	Our current testing charges
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	12685	This testing charge is combined for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the ratio. Our current testing charges
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	5380	This combined testing charge is for Fe2O3 and Al2O3 to calculate the ratio. Our current testing charges
7 Table-3 i.(Fineness)	-	1950	Our current testing charges
7 Table-3 ii a(Expansion by Le Chatelier)	-	1950	Our current testing charges
7 Table-3 ii a(Expansion after aeration)	-	1950	Our current testing charges
7 Table-3 ii b(Expansion by Autoclave)	-	3510	Our current testing charges
7 Table-3 ii b(Expansion after aeration)	-	3510	Our current testing charges
7 Table-3 iii a(Setting Time Initial)	-	875	Our current testing charges
7 Table-3 iii b(Setting Time Final)	-	875	Our current testing charges
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	Our current testing charges
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	Our current testing charges
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	Our current testing charges

15 May, 2027

-
-

7160

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 455 (2015)

Portland slag cement - Specification

31620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	3040	Current testing charge of lab
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1180	Current testing charge of lab
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	Current testing charge of lab
7 Table 1 i(Fineness IS 4031(Part 2))	-	1950	Current testing charge of lab
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1950	Current testing charge of lab
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	3510	Current testing charge of lab
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	875	Current testing charge of lab
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	875	Current testing charge of lab
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	2000	Current testing charge of lab
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	2270	Current testing charge of lab
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	2660	Current testing charge of lab

15 May, 2027

-
-

7161

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC (FLY ASH BASED)

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	Current testing charge of lab
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	Current testing charge of lab
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	Current testing charge of lab
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	Current testing charge of lab
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	Current testing charge of lab
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	Current testing charge of lab
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	Current testing charge of lab
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	Current testing charge of lab
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	Current testing charge of lab
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	Current testing charge of lab
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	Current testing charge of lab
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	Current testing charge of lab
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	Current testing charge of lab
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	Current testing charge of lab
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	Current testing charge of lab

15 May, 2027

-
-

7162

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

WATER FOR CONSTRUCTION

9690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 .2(pH)	-	1750	These are our current testing charges.
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	880	These are our current testing charges.
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	1750	These are our current testing charges.
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	2340	These are our current testing charges.
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	880	These are our current testing charges.
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	880	These are our current testing charges.
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	605	These are our current testing charges.
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	605	These are our current testing charges.

15 May, 2027

-
-

7163

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

PULVERIZED FUEL ASH

41045 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	7525	These are our current testing charges
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2145	These are our current testing charges
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3810	These are our current testing charges
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	3040	These are our current testing charges
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	2340	These are our current testing charges
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	3990	These are our current testing charges
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	2340	These are our current testing charges
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1180	These are our current testing charges
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	1220	These are our current testing charges
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1950	These are our current testing charges
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2820	These are our current testing charges
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3510	These are our current testing charges
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3810	These are our current testing charges
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	3510	These are our current testing charges
7.2(Uniformity Requirements)	-	2120	These are our current testing charges
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3510	These are our current testing charges

15 May, 2027

-
-

7164

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	These are our current testing charges.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	These are our current testing charges.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	These are our current testing charges.
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	These are our current testing charges.

15 May, 2027

-
-

7165

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 8042 (2015)

White portland cement - Specification (Third Revision)

41965 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the ratio. These are our current testing charges.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	These are our current testing charges.
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
6 -Table 2- i(Fineness 4031 Part 2)	-	1950	These are our current testing charges.
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	These are our current testing charges.
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1950	These are our current testing charges.
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	These are our current testing charges.
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	3510	These are our current testing charges.
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	These are our current testing charges.
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	These are our current testing charges.
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	These are our current testing charges.
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	These are our current testing charges.
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	These are our current testing charges.
6 -Table 2- vi(Degree of whiteness-Annex B)	-	2340	These are our current testing charges.

15 May, 2027

-
-

7166

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16353 (2015)

Portland Cement Clinker - Specification

Portland Cement Clinker

42725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-	12685	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio. These are our current testing charges.
Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio. These are our current testing charges.
Clause 5 Table 1(C3S, percent by mass)	-	4965	These are our current testing charges.
Clause 5 Table 1(C3A, percent by mass)	-	5860	These are our current testing charges.
Clause 5 Table 1(C3S+C2S, percent by mass)	-	4965	These are our current testing charges.
Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3))	-	2340	These are our current testing charges.
Clause 5 Table 1(Free lime)	-	2820	These are our current testing charges.
Clause 5 Table 1(Chloride content)	-	2340	These are our current testing charges.
Clause 5 Table 1(Magnesia)	-	3040	These are our current testing charges.
Clause 5 Table 1(Alkali content)	-	1950	These are our current testing charges.
Clause 5 Table 1(Total loss on ignition)	-	1180	These are our current testing charges.
Clause 5 Table 1(Insoluble residue)	-	2340	These are our current testing charges.
6.1 IS 4031(Part 2)(Fineness)	-	1950	These are our current testing charges.
6.1 Table 2 i) a) IS 4031 (Part 3)(Soundness by Le-Chatelier method)	-	1950	These are our current testing charges.
6.1 Table 2 i) b) IS 4031 (Part 3)(Soundness by Autoclave test method)	-	3510	These are our current testing charges.
6.1 Table 2 ii) a) IS 4031 (Part 5)(Initial Setting time)	-	875	These are our current testing charges.
6.1 Table 2 ii) b) IS 4031 (Part 5)(Final Setting time)	-	875	These are our current testing charges.
6.1 Table 2 iii) a) IS 4031 (Part 6)(Compressive Strength at 72±1 h)	-	2000	These are our current testing charges.
6.1 Table 2 iii) b) IS 4031 (Part 6)(Compressive Strength at 168±2 h)	-	2270	These are our current testing charges.
6.1 Table 2 iii) c) IS 4031 (Part 6)(Compressive Strength at 672±4 h)	-	2660	These are our current testing charges.
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-	744	These are our current testing charges.
6.2 Table 3 ii) (Granulometric composition of clinker(Size 5-50 mm))	-	743	These are our current testing charges.
6.2 Table 3 i) (Granulometric composition of clinker(Size <5 mm))	-	743	These are our current testing charges.

15 May, 2027

-
-

7167

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

39695 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	These are our current testing charges.
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	These are our current testing charges.
5.4.2(a)( Aggregates Impact Value)	-	3040	These are our current testing charges.
5.4.2(b)( Aggregates Impact Value)	-	3040	These are our current testing charges.
5.4.3(a)( Aggregate Abrasion Value)	-	4490	These are our current testing charges.
5.4.3(b)( Aggregate Abrasion Value)	-	4490	These are our current testing charges.
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	2340	These are our current testing charges.
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	2340	These are our current testing charges.
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1180	These are our current testing charges.
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1180	These are our current testing charges.
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	5320	These are our current testing charges.
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	5950	These are our current testing charges.
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	980	These are our current testing charges.
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2145	These are our current testing charges.
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	0	These are our current testing charges.
5.5(Soundness By Magnesium Sulphate)	-	5950	These are our current testing charges.
5.3(Elongation Index)	-	870	These are our current testing charges.
5.3(Flakiness Index)	-	870	These are our current testing charges.

15 May, 2027

-
-

7168

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16715 (2018)

Ultrafine Ground Granulated Blast Furnace Slag - Specification

64290 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4 and 5.1(Loss on ignition)	-	1180	Complete testing charge is from current BIS approved scope valid upto 15.05.24.
Clause 4 and 5.1(Manganese oxide (MnO))	-	1950	These are our current Testing charges.
Clause 4 and 5.1(Magnesium oxide (MgO))	-	3040	These are our current Testing charges.
Clause 4 and 5.1(Sulphide sulphur (S))	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Sulphate (as SO3),)	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Insoluble residue)	-	2340	These are our current Testing charges.
Clause 4 and 5.1(Chloride content)	-	2340	These are our current Testing charges.
Clause 4 and 5.1((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3))	-	0	These are our calculated values.
Clause 4 and 5.1((CaO+MgO+Al2O3)/ SiO2)	-	0	These are our calculated values.
Clause 4 and 5.1((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO))	-	0	These are our calculated values.
6 and Table 2 i(Fineness (optional), BET Method(Nitrogen adsorption) IS 11578)	-	19965	These are our current Testing charges.
6 and Table 2 ii a(Particle size -D50)	-	7500	These are our current Testing charges.
6 and Table 2 ii b(Particle size -D95)	-	7500	These are our current Testing charges.
6 and Table 2 iii a(Slag activity index -7 days)	-	6495	These are our current Testing charges.
6 and Table 2 iii b(Slag activity index -28 days)	-	7300	These are our current Testing charges.

15 May, 2027

-
-

7169

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 16993 (2018)

Microfine Ordinary Portland Cement ” Specification

50920 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 -Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	Complete testing charges are the existing BIS charges in our current scope valid till 15.05.2024.
5 -Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	These are our current testing charges.
5 -Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	These are our current testing charges.
5 -Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	These are our current testing charges.
5 -Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These are our current testing charges.
5 -Table - 1 ix( (Additional requirements) for microfine sulphate resisting Portland cement: a) Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	5860	These are our current testing charges.
5 -Table - 1 ix((Additional requirements) for microfine sulphate resisting Portland cement: b) Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate (C2AF + 2C2A) - Cl 4 of IS 4032:1985)	-	8200	These are our current testing charges.
6 and Table 2 i(Fineness (optional) IS 11578)	-	1950	These are our current testing charges.
6 and Table 2 ii a(Particle size, D50, Using laser diffraction PSD analyzer)	-	7500	These are our current testing charges.
6 and Table 2 ii b(Particle size, D95, Using laser diffraction PSD analyzer)	-	7500	These are our current testing charges.
6 and Table 2 iii a(Setting Time Initial)	-	875	These are our current testing charges.
6 and Table 2 iii b(Setting Time Final)	-	875	These are our current testing charges.
6 and Table 2 iv(Bleeding test at 3 h from the time of mixing)	-	12100	These are our current testing charges.
6 and Table 2 v a(Compretsive Strenqth .3 days IS 4031(Part 8))	-	2000	These are our current testing charges.
6 and Table 2 v b(Compretsive Strenqth 7 days IS 4031(Part 8))	-	2270	These are our current testing charges.
6 and Table 2 v c(Compretsive Strenqth 28 days IS 4031(Part 8))	-	2660	These are our current testing charges.

15 May, 2027

-
-

7170

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 1344 (1981)

Specification for Calcined Clay Pozzolana

26210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.2(Silica)	-	2145		Complete testing charges are BIS approved charges in our scope and are valid upto 15.05.2024.

15 May, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number