BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14136 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7201

Fire Test & Research Laboratory, Sonipat

8123835

IS 907 (1984)

Specification for suction strainers, cylindrical type for fire fighting purposes (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Shape and Dimensions)	-	8000	Testing Charges
4(Tolerances)	-	1000	Testing Charges
5(Workmanship and Finish)	-	1000	Testing Charges

31 Dec, 2026

-
Except Material (Cl.2)

7202

Fire Test & Research Laboratory, Sonipat

8123835

IS 906 (1988)

Specification for revolving branch pipe for fire fighting (Third Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimension and Construction)	-	1500	Testing charges
5(Finish)	-	1000	Testing Charges
6(Performance Requirements)	-	7000	Testing charges

31 Dec, 2026

-
Excluding: Cl.3.1.1 (a) Sand casting, Cl.3.1.1 (b) re casting, Cl. 3.1.1, c (Hot forging), Cl.3.1.2 (Aluminium Alloy), Cl.3.2 Springs and Cl.3.3 (Washer)

7203

Fire Test & Research Laboratory, Sonipat

8123835

IS 4927 (1992)

Unlined flax canvas hose for fire fighting - Specification (First Revision)

Unlined Flax Canvas Hose

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Internal diameter of hose)	-	500	-
5(Length)	-	750	-
6.1(Average mass per meter)	-	500	-
6.1(Average mass per meter)	-	500	-
6.1(Average mass per meter)	-	500	-
6.1(Average mass per meter)	-	500	-
7.1(Coil Diameter (Flexibility))	-	500	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	1000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	1000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	1000	-
Cl. 8.1, Annexure B & Table 1(Percolation Test)	-	1000	-
9.1(Change in size (Increase in Length))	-	1250	-
9.2(Change in size (Increase in Outer Diameter))	-	1250	-
10(Hydrostatic Proof Pressure Test)	-	4000	-
11(Hydrostatic Bursting Pressure Test)	-	4000	-

31 Dec, 2026

-
Except Material (Cl.3)

7204

Fire Test & Research Laboratory, Sonipat

8123835

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

Type, Foam based Type, Powders based ABC/ BC/D Type, C

100500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.3(Fill Density)	-	1000	NA
Cl 5.4(Filling Tolerance)	-	1000	NA
Cl 5.5.1(Nominal Charge)	-	1000	NA
Cl 6.2.1(Effective Discharge Time)	-	500	NA
Cl 6.2.2(Bulk Range)	-	500	NA
Cl 6.3(Resistance To Temperature Changes)	-	4000	NA
Cl 6.5(Intermittent Discharge Test)	-	2000	NA
Cl 4(Types of Wheeled Fire Extinguishers)	-	0	NA
9.1(Colour)	-	1000	NA
8.18.3(Hose Retaining Unit)	-	0	NA
8.18.2(Mobility)	-	0.01	NA
8.18.1(Carriage Assembly)	-	1000	NA
8.17(Dip tubes and Filters for water based Extinguisher)	-	1500	NA
8.15(Safety Locking Devices)	-	1000	NA
8.14(Method of operation for gas cartridge type extinguishers)	-	1000	NA
8.14(Method of operation for carbon dioxide extinguishers)	-	1000	NA
8.13.3(Load test on discharge horn)	-	0	NA
8.13.2(Requirement to prevent loosening or detachment)	-	0	NA
8.13.1(Horn of carbon dioxide extinguisher)	-	2000	NA
8.12(Control valve test)	-	1000	NA
8.11.3(Requirement of burst pressure of hose assemblies for carbon dioxide fire extinguishers)	-	0	NA
8.11.3(Requirement of burst pressure of hose assemblies for except carbon dioxide fire extinguishers)	-	0	NA
8.11.2(Requirement of hose and coupling system)	-	0	NA
8.11.1(Requirement of the Discharge Assemblies)	-	2000	NA
8.9.2(Leakage Test)	-	0	NA
8.8(Safety and Anti-overfill devices)	-	1500	NA
8.7.6(Requirement of edges and surfaces)	-	0	NA
8.7.5(Requirement of burst test of cap,valve and closure)	-	0	NA
8.7.4(Requirement of collar)	-	0	NA
8.7.3(Requirement of filling opening diameter)	-	0	NA
8.7.2(Requirement of threaded connections on cylinder)	-	0	NA
8.7.1(Caps valves and closure)	-	1000	NA
8.6(Minimum wall thickness of the cylinder)	-	1000	NA
8.3.3(Pressure cycling Test)	-	3000	NA
8.3.2(Deformation Test)	-	1000	NA
8.3.1(Burst Test)	-	3000	NA
8.2(High Pressure Cylinder)	-	0	NA
8.1.7(Drain Plug)	-	0	NA
8.1.6(Thread of Plastic Components)	-	0	NA
8.1.4(Construction Requirement)	-	0	NA
8.1.3(Requirement of Welding)	-	0	NA
8.1.2(Leakage Observation during conditioning Test)	-	0	NA
7.2(Class 'B' Fire Test 233B)	-	80000	NA
7.2(Class 'B' Fire Test 183B)	-	73000	NA
7.2(Class 'B' Fire Test 144B)	-	62000	NA
7.2(Class 'B' Fire Test 113B)	-	53000	NA
7.2(Class 'B' Fire Test 89B)	-	45000	NA
7.2(Class 'B' Fire Test 70B)	-	37000	NA
7.2(Class 'B' Fire Test 55B)	-	30000	NA
7.2(Class 'B' Fire Test 34B)	-	13500	NA
7.2(Class 'B' Fire Test 21B)	-	9000	NA
7.2(Class 'B' Fire Test 13B)	-	6000	NA
7.2(Class 'B' Fire Test 8B)	-	4500	NA
7.2(Class 'A' Fire Test 20A)	-	65000	NA
7.2(Class 'A' Fire Test 15A)	-	45000	NA
7.2(Class 'A' Fire Test 10A)	-	30000	NA
7.2(Class 'A' Fire Test 6A)	-	32000	NA
7.2(Class 'A' Fire Test 4A)	-	27000	NA
7.2(Class 'A' Fire Test 3A)	-	18000	NA
7.2(Class 'A' Fire Test 2A)	-	16000	NA
7.2(Class 'A' Fire Test 1A)	-	14000	NA
6.7.4(Displaced Test)	-	0	NA
6.7.3(Nozzle Drop Test)	-	0	NA
6.7.1(Observation of Durability Test after Nozzle Drop Test and Displaced Test)	-	4000	NA
6.6.2(Internal Corrosion Test)	-	4000	NA
6.6.1(External Corrosion Test)	-	2000	NA
6.4(Retention of charge)	-	1000	NA
5.5.2(Gross Mass)	-	0	NA
3.16 and 8.1.1(Determination of maximum service pressure)	-	750	NA
3.19 and 8.3(Determination of Service Pressure)	-	750	NA
Cl no 6.8(16018 :2012)	-	25000	NA
Cl no 6.8(16018 :2012)	-	0	NA
Cl 6.1(Operating Temperature)	-	300	NA
6.7.2(Durability test of trailer mounted fire extinguisher)	-	3000	NA

31 Dec, 2026

-
Included w.e.f 17.04.2018 Except : Class D fire test (cl.7.3)),Requirement of the plastic component (Cl. 8.10), Pressure Gauge for Low Pressure Extinguisher (Cl. 8.16) & Gasket & O-ring (Cl. 8.19), Cl. 8.4.1.1 (carbon, sulphur, phosphorus), Cl.8.4.2.2 (Carbon)

7205

Fire Test & Research Laboratory, Sonipat

8123835

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

Water, Foam, Powder based ABC/BC/D type, Clean Agent Wa

291800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	200	-
Cl. 5.3.2(Filling Requirements)	-	200	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	500	-
Cl. 7.3(Resistance to Temperature changes)	-	2000	-
Cl 7.5.1(Impact Resistance Test)	-	500	-
Cl 7.5.2(Vibration Resistance Test)	-	2000	-
Cl 7.6(Resistance to Corrosion)	-	0	-
Cl 7.7(Tapping Test)	-	1000	-
Cl 7.8(Intermittent Discharge Test)	-	1000	-
Cl 8.1(Rating Suitability for the Various Classes of Fire)	-	0	-
Cl 9(CONSTRUCTION REQUIREMENTS)	-	0	-
Cl 9.2.2(Burst Test)	-	2000	-
Cl 9.2.3(Crushing Test)	-	2000	-
Cl 9.2.4(Pressure Cycling Test)	-	2000	-
Cl 9.3(Carrying Handle)	-	500	-
Cl 9.4(Mounting)	-	500	-
Cl 9.5(Caps, Valves and Closures)	-	500	-
Cl 9.7.1(Requirements for Plastics Components)	-	2000	-
Cl 9.7.2(Requirements for Plastics Components)	-	2000	-
Cl 9.7.3(Requirements for Plastics Components)	-	2000	-
Cl 9.8(Hose Assemblies)	-	1000	-
Cl 9.9 - Table 10(Method of Operation)	-	200	-
Cl 9.10(Safety-Locking Devices)	-	200	-
Cl 9.11.1(Requirements for Pressure Gauges and Indicators for Low-Pressure Extinguishers)	-	5000	-
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	500	-
Cl 9.13(Horn Test for Carbon Dioxide (CO2) Extinguishers)	-	1000	-
Cl 9.14(Requirements for Extinguishants Filled in the Extinguisher)	-	2500	For ABC = Rs. 1000/- For BC = Rs. 500/- For Foam = Rs. 1000/-
Cl 9.11.3(Burst Strength Test — Gauges and Indicators)	-	0	-
Cl 9.11.4(Water Resistance Test — Gauges and Indicators)	-	0	-
Cl 9.11.2(Calibration Test - Gauges and Indicators)	-	0	-
Cl 10(MARKING AND COLOUR)	-	0	-
3.5 & 9.2.1.1(Determination of Service Pressure )	-	50	-
3.6 & 9.2.1.8(Determination of Maximum Service Pressure )	-	50	-
6.1(Determination of Test Pressure)	-	50	-
6.2(Determination of Minimum Burst Pressure)	-	50	-
7.4.1.(Retention of charge following partial discharge)	-	500	-
7.4.2(Leakage Test)	-	1000	-
7.6.1(External Corrosion Test for all types of extinguishers)	-	2000	-
7.6.1(Internal Corrosion Test Test is applicable only for water based & clean agent PFEs)	-	2000	-
8.1.1, 8.2.2 a) & 8.3(Class A Fire Test)	-	105000	1A = 10000/- 2A = 12000/- 3A = 14000/- 4A = 18000/- 6A = 30000/- 10A = 55000/- 15A = 80000/- 20A = 105000/-
8.1.2, 8.2.2 b) & 8.4(Class B Fire Test)	-	80000	8B = 4500/- 13B = 6000/- 21B = 9000/- 34B = 13500/- 55B = 30000/- 70B = 37000/- 89B = 45000/- 113B = 53000/- 144B = 62000/- 183B = 73000/- 233B = 80000/-
8.1.4 & 8.5(Class D Test fire)	-	16000	-
8.1.5, 8.2.2(C) , 8.6, 8.7(Class F Splash Test)	-	27000	5F = 8000/- 15F = 12000/- 25F = 18000/- 75F = 27000/-
8.8(Electrical Conductivity of Extinguishers Discharge )	-	30000	-
9.2.1.2(Construction requirement for stand vertically upright position)	-	500	-
9.2.1.3(Requirement of Welding)	-	0	-
9.2.1.4(Construction requirement of Neck Ring)	-	0	-
9.2.1.5(Cast Analysis Certifcate)	-	0	-
9.2.1.6(Type of threads on parts made of plastic component joining metal parts)	-	0	-
9.2.1.7(Construction requirement for the bottom of the extinguisher)	-	0	-
9.2.5.3, (Measure Thickness of the cylinder)	-	100	-
9.2.6.3 (Measure Thickness of the cylinder (S.S. Body))	-	100	-
9.2.7(Measure Thickness of the cylinder (Aluminium body))	-	100	-
9.2.8(Composite Cylinder)	-	0	-
9.6(Safety Device)	-	0	-
Cl. 5.3.2(Filling Requirements)	-	0	-
Cl. 5.3.2(Filling Requirements)	-	0	-
Cl. 5.3.2(Filling Requirements)	-	0	-
Cl. 5.3.2(Filling Requirements)	-	0	-
Cl. 5.3.2(Filling Requirements)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 5.3.3(Capacities)	-	0	-
Cl. 7.2 - Table 1(GENERAL OPERATING PERFORMANCE REQUIREMENTS)	-	0	-
Cl 7.8(Intermittent Discharge Test)	-	0	-
7.6.2(Internal Corrosion Test for Extinguishers Using Water-Based Medium and Clean Agent)	-	4000	-
9.14.1(Content of Mono Ammonium Phosphate)	-	2000	-
9.14.3(Surface Tension of Foam Solution)	-	1000	-
9.14.2(Content of Sodium Bicarbonate/Potassium Picarbonate for BC Powder)	-	-	-

31 Dec, 2026

-
Revised version included w.e.f 03.05.2019 Excluding : Composition of welded low carbon steel cylinders (Cl. 9.2.5.1)& (Cl.9.2.5.2) Carbon content of Stainless Steel Cylinder (Cl.9.2.6.2)&(Cl.9.2.6.2)

7206

Fire Test & Research Laboratory, Sonipat

8123835

IS 5290 (1993)

Landing valves - Specification (Third Revision)

Type-A and Type-B

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 (a) fig-1, type A(Types AND DIMENSIONS)	-	200	-
5, 5.1 (b) fig-2, type B(Types AND DIMENSIONS)	-	200	-
5.2(Types AND DIMENSIONS)	-	1000	-
6, 6.1(Finish)	-	300	-
7, 7.1(7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-	1500	-
7, 7.2(hydrostatics pressure tests)	-	2000	-
7, 7.3(Flow test, pressure 7 kgf/cm2)	-	4000	-
6, 6.2(Finish)	-	500	-

31 Dec, 2026

-
Excluding: Cl.4.1, Cl.4.1.1, 4.2,4.3,4.4,.4.5

7207

Fire Test & Research Laboratory, Sonipat

8123835

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

AFFF, PF, FP, FFFP, AR-AFFF,AR-FP, AR-FFFP, SF Type,

87000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Cl. 4.1, Table 1, Sr. No. 3(pH (Original Sample))	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Cl. 4.1, Table 1, Sr. No. 10(spreading coefficient)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Cl. 4.1, Table 1, Sr. No. 8(Surface tension)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Cl. 4.1, Table 1, Sr. No. 3(pH (ageing Sample))	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.1(General observation regarding colour and odour)	-	0	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.1(General observation regarding colour and odour)	-	0	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. I of Table 1, Annex-A-1(Visual Examination)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. II of Table 1, Annex-A-2(Freezing and thawing)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III of Table 1, Annex-B(pH of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of original sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV of Table 1, Annex-C(Specific Gravity of aged sample)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VI of Table 1, using viscosity meter see sl No. (iv) of table 2 of IS 1206 (Part 3)(Viscosity (Kinematic))	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VI of Table 1, using viscosity meter see sl No. (iv) of table 2 of IS 1206 (Part 3)(Viscosity (Kinematic))	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VII of Table 1, Annex-E(Pour Point)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. V of Table 1, Annex-D(Misciblity with distilled water)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. V of Table 1, Annex-D(Misciblity with synthetic sea water)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Original Sample)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Aged Sample)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Original Sample)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. VIII of Table 1, Annex-F(Sludge Content for Aged Sample)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IX of Table 1, Annex-G(Surface Tension)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. X of Table 1, Annex-G(Spreading Coefficient)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. X of Table 1, Annex-G(Spreading Coefficient)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. I of Table 2, Annex-J(Expansion)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. I of Table 2, Annex-J(Expansion)	-	1000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. II of Table 2, Annex-J(25% Drainage Time)	-	500	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with potable water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(a) of Table 2, Annex-K(Fire Control Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(b) of Table 2, Annex-K(Fire Extinction Time for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(c) of Table 2, Annex-K(Sealability/Film forming for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. III(d) of Table 2, Annex-K(Burn Back for Hydrocarbon Fires (Non Polar) with synthetic sea water)	-	5000	AFFF, FFFP, FP, PF, SF, AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(a) of Table 2, Annex-M(Fire Control Time for Polar Solvent Fire with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(b) of Table 2, Annex-M(Fire Extinction Time Polar Solvent Fire with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(c) of Table 2, Annex-M(Sealability/Film forming for Polar Solvent Fires with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP
Clause No. 4.2, Sr. No. IV(d) of Table 2, Annex-M(Burn Back for Polar Solvent Fires with synthetic sea water)	-	5000	AR-AFFF, AR-FFFP & AR-FP

31 Dec, 2026

-
Revised version included w.e.f 03.05.2019

7208

Fire Test & Research Laboratory, Sonipat

8123835

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

BC Type, ABC Type, D Type

49000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	500	ABC, BC & D TYPE
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	1500	BC
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	500	ABC, BC & D TYPE
Clause 5 Table 1(vi)(Water repellency)	-	500	ABC, BC & D TYPE
Clause 5 Table 1(vi)(Water repellency)	-	500	ABC, BC & D TYPE
Clause 5 Table 1(vii)(Moisture content)	-	500	ABC, BC & D TYPE
Clause 5 Table 1(viii)(Rate of flow)	-	500	ABC, BC & D TYPE
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	2000	ABC, BC & D TYPE
Clause 5 Table 1(x)(Fire test)	-	30000	For A class - 12000/- For B Class - Rs. 30000/- For D Class - Rs. 7000/-
Clause 5 Table 1(xi)(Temperature resistance test)	-	1000	ABC, BC & D TYPE
Clause 5 Table 1(xii)(colour)	-	0	ABC, BC & D TYPE
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent of ABC Powder)	-	1000	ABC
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for BC Powder)	-	500	BC
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for D Powder)	-	1500	D TYPE
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for ABC Powder)	-	1000	ABC
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for BC Powder)	-	500	BC TYPE
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for D Powder)	-	1500	D TYPE
Clause No. 5, Sr. No. III of Table 1, Annex-B(Aparent Denisty)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. IV of Table 1, Annex-C(Particle Size/ Sieve Analysis)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. V of Table 1, Annex-D(Hygroscopicity)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. VI of Table 1, Annex-E(Water Repellency)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. VII of Table 1, Annex-F(Moisture Content)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic)	-	500	ABC, BC & D TYPE
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic for Class D Powder)	-	500	D TYPE
Clause No. 5, Sr. No. IX of Table 1, Annex-H(Foam Compatibility)	-	2000	ABC, BC & D TYPE
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'A')	-	12000	ABC
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'B')	-	30000	ABC & BC
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'D')	-	7000	D TYPE
Clause No. 5, Sr. No. XI of Table 1, Annex-K(Temperature Resistance Test)	-	1000	ABC, BC & D TYPE
Clause No. 5, Sr. No. XII of Table 1(Colour of 'ABC' Powder)	-	0	ABC TYPE
Clause No. 5, Sr. No. XII of Table 1(Colour of 'BC' Powder)	-	0	BC TYPE
Clause No. 5, Sr. No. XII of Table 1(Colour of 'D' Powder)	-	0	D TYPE

31 Dec, 2026

-
Revised version i . Included w.e.f 03.05.2019

7209

Fire Test & Research Laboratory, Sonipat

8123835

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Finish and workmanship)	-	250	-
6.3(Hydraulic test requirement)	-	2000	-
6(Branch pipe)	-	750	-
7(Nozzle)	-	500	-
7.3(Hydraulic test requirement)	-	2000	-
5.3(Size and Dimension )	-	750	-
5.4(Hydraulic test requirement)	-	2000	-
5(Delivery hose coupling)	-	500	-
3(Finish and workmanship)	-	250	-
6(Branch pipe)	-	750	-
6.3(Hydraulic test requirement)	-	2000	-
7.3(Hydraulic test requirement)	-	2000	-
5(Delivery hose coupling)	-	500	-
5.3(Size and Dimension )	-	750	-
5.4(Hydraulic test requirement)	-	2000	-
8.2(Shape & Dimensions of Spanner)	-	500	-
8.4(Deflection test of Spanner)	-	500	-
8.3(Coating of Nozzle Spanner)	-	0	-
3(Finish and workmanship)	-	250	-
7(Nozzle)	-	500	-
5.3(Size and Dimension )	-	750	-
5(Delivery hose coupling)	-	500	-
5.4(Hydraulic test requirement)	-	2000	-

31 Dec, 2026

-
Except Material (Cl.5.2, 6.1, 7.1 & 8.1)

7210

Fire Test & Research Laboratory, Sonipat

8123835

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

Type-A and Type-B

12750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Dimensions)	-	150	-
Cl 5.2(Resistance to Leakage)	-	1000	-
Cl 5.3(Strength)	-	3000	-
Cl 5.3(Strength)	-	3000	-
Cl 5.4(Range & Water Flow Rate)	-	2500	-
Cl 5.5(Swinging)	-	500	-
Cl 5.6(Reel Action)	-	500	-
Cl 6(Workmanship)	-	500	-
Cl 7(Painting)	-	500	-
Cl 5.1(Dimensions)	-	250	-
Cl 5.1(Dimensions)	-	150	-
Cl 5.1(Dimensions)	-	150	-
Cl 5.1(Dimensions)	-	150	-
Cl 5.1(Dimensions)	-	150	-
Cl 5.1(Dimensions)	-	150	-
Cl 5.1(Dimensions)	-	150	-

31 Dec, 2026

-
Except Material (Cl.3.1)

7211

Fire Test & Research Laboratory, Sonipat

8123835

IS 636 (2018)

Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)

Type 1, Type 2 & Type 3

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free from pitting and other imperfections)	-	500	Type - 1 = 500/-, Type - 2 = 500/-, Type-3 = 500/-
Cl 6.1.2(Externally applied elastomeric coating or covering of the reinforcement, if present shall be generally smooth and practically free from pitting and other imperfections)	-	500	Type - 1 = 500/-, Type - 2 = 500/-, Type-3 = 500/-
Cl 6.1.3(The jacket shall be practically free from dirt, knots, lumps, irregularities of the yarn and other visible defects.)	-	500	Type - 1 = 500/-, Type - 2 = 500/-, Type-3 = 500/-
Cl.6.2(The internal diameter of the hose shall be measured by a suitable conical plug gauge and shall conform to the specified diameter with a tolerance of plus 2 and minus 0.0 mm.)	-	500	Type - 1 = 500/-, Type - 2 = 500/-, Type-3 = 500/-
Cl.6.3(Unless specified otherwise, the standard length shall be 30 m. Unless otherwise specified, a tolerance of ± 2 percent shall be permitted on the length prescribed for the hose by the purchaser but the total of all lengths of hose supplied shall be not less than the total quantity specified by the purchaser.)	-	500	Type - 1 = 500/-, Type - 2 = 500/-, Type-3 = 500/-
Cl.6.4(The average mass of hose per meter of 2 m length, without couplings attached, shall not be more than that prescribed in Table 1. For the determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity for a period of at least 48 h and then shall be weighed under the same conditions.)	-	1000	Type - 1 = 1000/-, Type - 2 = 1000/-, Type-3 = 1000/-
Cl.6.5(For 30 m length of dry hose without couplings, the coil diameter shall not exceed 45 cm for Type 1, 50 cm for Type 2 and 55 cm for Type 3.)	-	1000	Type - 1 = 1000/-, Type - 2 = 1000/-, Type-3 = 1000/-
Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443 (Part 3) increasing the pressure at the rate not exceeding 10 kgf/cm² per min and maintaining it for 1 min. Within this 1 min, the hose shall neither develop any leakage or sweating, nor shall any thread in the jacket break.)	-	3000	Type - 1 = 3000/-, Type - 2 = 3000/-, Type-3 = 3000/-
Cl.6.7(A test length of hose, 1 m clear of fittings when subjected to an internal hydraulic pressure in accordance with 8.3 of IS 443 (Part 3) while increasing the pressure at the rate not exceeding 10 kgf/cm2 per min shall not burst or show leakage before a pressure of 38 kgf/cm2 is reached)	-	3000	Type - 1 = 3000/-, Type - 2 = 3000/-, Type-3 = 3000/-
Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.)	-	3000	Type - 1 = 3000/-, Type - 2 = 3000/-, Type-3 = 3000/-
Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	Type - 1 = 1000/-, Type - 2 = 1000/-, Type-3 = 1000/-
Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.)	-	1000	Type - 1 = 1000/-, Type - 2 = 1000/-, Type-3 = 1000/-
Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover)	-	1000	Type - 1 = NA, Type - 2 = 1000/-, Type-3 = 1000/-
Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. )	-	3000	Type - 1 = 3000/-, Type - 2 = 3000/-, Type-3 = 3000/-
Cl.6.12(When determined by the method described in Annex C, the average number of cycles completed before bursting of three test pieces, shall not be less than the value specified in Table 2.)	-	2500	Type - 1 = 2500/-, Type - 2 = 2500/-, Type-3 = 2500/-
Cl.6.13(When tested in accordance with Annex D, the amount of moisture absorbed shall not exceed 0.20 kg/m2 for Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.)	-	2500	Type - 1 = 2500/-, Type - 2 = 2500/-, Type-3 = 2500/-
Cl.6.14(When tested by the method described in Annex E, none of the test samples shall burst at less than 8 s of the application of the hot cube for Type 2 and 20 s for Type 3 hose.)	-	1500	Type - 1 = NA, Type - 2 = 1500/-, Type-3 = 1500/-
Cl.6.15 (1)(The length shall be laid horizontally and the central fully immersed portion of the hose shall be visually examined for any swelling of rubber, weathering and cracking in the rubber lining)	-	2500	Type - 1 = 2500/-, Type - 2 = 2500/-, Type-3 = 2500/-
Cl.6.18(When tested in accordance with Annex H, the pressure loss per 23 m length shall not exceed the values specified in Table 3 at the specified flow rate and inlet pressure (Recommendations for pressure testing of hoses in service are given at Annex G).)	-	3500	Type - 1 = 3500/-, Type - 2 = 3500/-, Type-3 = 3500/-

31 Dec, 2026

-
Ozone Resistance test (Cl.6.16), Hot surface rrsistance test (Cl.6.17)

7212

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	600	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	800	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	600	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	200	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	400	-
7(Dimension - IS 3965)	-	0	-
Table-1, Clause - 5.1(Copper)	-	400	-
Table-1, Clause - 5.1(Iron)	-	0	-
Table-1, Clause - 5.1(Magnesium)	-	0	-
Table-1, Clause - 5.1(Manganese)	-	0	-
Table-1, Clause - 5.1(Titanium)	-	0	-
Table-1, Clause - 5.1(Silicon)	-	0	-
Table-1, Clause - 5.1(Chromium)	-	0	-
Table-1, Clause - 5.1(Zinc)	-	0	-

19 Nov, 2027

-
-

7213

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(FREEDOM FROM DEFECTS)	-	200	-
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	3000	-
5, Table 1.(Chemical Composition)	-	5000	-
17(Marking)	-	500	-
11(Pressure Test)	-	3500	-
17(Marking)	-	500	-
11(Pressure Test)	-	3500	-
11(Pressure Test - IS 617)	-	3500	-
13(Marking)	-	500	-
Table-1, Clause - 5.1(Copper)	-	500	-
Table-1, Clause - 5.1(Iron)	-	500	-
Table-1, Clause - 5.1(Magnesium)	-	500	-
Table-1, Clause - 5.1(Manganese)	-	500	-
Table-1, Clause - 5.1(Silicon)	-	500	-
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	500	-
6.2(Hardness)	-	500	-
Cl. 5(Copper)	-	500	-
Cl. 5(Silicon)	-	500	-
Cl. 5(Magnesium)	-	500	-
Cl. 5(Manganese)	-	500	-
Cl. 5(Iron)	-	500	-
Cl. 5(Nickel)	-	500	-
Cl. 5(Zinc)	-	500	-
Cl. 5(Lead)	-	500	-
Cl. 5(Tin)	-	500	-
Cl. 5(Titanium)	-	500	-
Cl. 5(Aluminium)	-	500	-
Cl. 5(Chromium)	-	500	-
Cl. 5(Titanium)	-	500	-
Cl. 5(Other Element each)	-	500	-
Cl. 5(Other Element Total)	-	500	-
Cl. 5(Bismuth)	-	500	-

19 Nov, 2027

-
Exclusion: Cl.11 (Pressure Test), Cl.7 (Freedom from Defects)

7214

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Copper- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
6(Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	500	-
9 & 10(Dimensions and Tolerances )	-	200	-
11(Freedom from Defects )	-	200	-
12(Macro-examination )	-	500	-
Cl. 6.1(Nitrogen)	-	500	-
Cl. 6.1(Niobium)	-	500	-
Cl. 6.1(Titanium)	-	500	-
Cl. 6.1(Copper)	-	500	-
Cl. 6.1(Aluminium)	-	500	-
Cl. 6.1(Molybdenum)	-	500	-
Cl. 6.1(Chromium)	-	500	-
Cl. 6.1(Vanadium)	-	500	-
Cl. 6.1(Nickel)	-	500	-
Cl. 6.1(Manganese)	-	500	-
Cl. 6.1(Silicon)	-	500	-
Cl. 6.1(Carbon)	-	500	-
6("Total content of elements (Cr+Cu+Ni+Mo+P)-IS:228 ")	-	3000	-
6(Sulphur + Phosphorus - IS:228)	-	1000	-
6(Micro alloying elements (Nb+V+Ti+B))	-	1000	-
11.4 (i)(Bend)	-	200	-
11.4 (ii)(Out of Square)	-	100	-
11.4 (iii)(Scarfing pits)	-	100	-

19 Nov, 2027

-
Exclusion: Cl.12 (Sulphur Print Test)

7215

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	400	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	400	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	400	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	400	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	400	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	400	-
5.4.2-IS: 3025(P-11)(Ph)	-	400	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	400	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	400	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	400	-
Cl 5.4 Table 1 (iv)(Chloride)	-	400	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	400	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	400	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	400	-
Cl 5.4 .2(pH)	-	400	-
Cl 5.4 (b)(Alkalinity)	-	400	-
Cl 5.4 (a)(Acidity)	-	400	-

19 Nov, 2027

-
Only from construction water excluding Cl.5.4.1.2 and 5.4.1.3

7216

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 18739 (2024)

Textiles Bedsheets Pillow cover and Blanket Cover Specification

58400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table-1(Fibre content)	-	500	To be charged for bed sheet
3.1, Table-1(Count of Yarn-Warp)	-	400	To be charged for bed sheet
3.1, Table-1(Count of Yarn-Weft)	-	400	To be charged for bed sheet
3.1, Table-1(Weave)	-	400	To be charged for bed sheet
3.1, Table-1(Ends/cm)	-	200	To be charged for bed sheet
3.1, Table-1(Picks/cm)	-	200	To be charged for bed sheet
3.1, Table-1(Mass g/m2, Min)	-	400	To be charged for bed sheet
3.1, Table-1, (iii)(Tolerance)	-	0	To be charged for bed sheet
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	500	To be charged for bed sheet
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	500	To be charged for bed sheet
3.1, Table-2(Tear Strength,-Warpway)	-	500	To be charged for bed sheet
3.1, Table-2(Tear Strength,-Weftway)	-	500	To be charged for bed sheet
3.1, Table-2(Fabric Skew, Percent, Max)	-	400	To be charged for bed sheet
3.1, Table-2(Fabric Bow, Percent, Max)	-	400	To be charged for bed sheet
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	1000	To be charged for bed sheet
3.1, Table-2(Scouring Loss Percent, Max)	-	600	To be charged for bed sheet
3.1, Table-2(pH Value)	-	350	To be charged for bed sheet
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	400	To be charged for bed sheet
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	1200	To be charged for bed sheet
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	400	To be charged for bed sheet
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	350	To be charged for bed sheet
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	250	To be charged for bed sheet
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	400	To be charged for bed sheet
3.2(Fabric Content)	-	500	To be charged for bed sheet
3.3(Freedom from Defects)	-	800	To be charged for bed sheet
3.4(Sewing Thread)	-	600	To be charged for bed sheet
3.5(Hems)	-	400	To be charged for bed sheet
3.6(Sewing)	-	400	To be charged for bed sheet
3.7, Table-4(- Size)	-	400	To be charged for bed sheet
3.7, Table-4(Width,cm)	-	400	To be charged for bed sheet
3.7, Table-4(Length, cm)	-	400	To be charged for bed sheet
Cl-3.8(Soil Release Efficiency)	-	11500	To be charged for bed sheet
Cl-3.9(Antimicrobial Activity)	-	2800	To be charged for bed sheet
Cl-3.10(Whiteness Index)	-	750	To be charged for bed sheet
3.1, Table-1(Fibre content)	-	500	To be charged for pillow cover
3.1, Table-1(Count of Yarn-Warp)	-	400	To be charged for pillow cover
3.1, Table-1(Count of Yarn-Weft)	-	400	To be charged for pillow cover
3.1, Table-1(Weave)	-	400	To be charged for pillow cover
3.1, Table-1(Ends/cm)	-	200	To be charged for pillow cover
3.1, Table-1(Picks/cm)	-	200	To be charged for pillow cover
3.1, Table-1(Mass g/m2, Min)	-	400	To be charged for pillow cover
3.1, Table-1, (iii)(Tolerance)	-	0	To be charged for pillow cover
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	500	To be charged for pillow cover
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	500	To be charged for pillow cover
3.1, Table-2(Tear Strength,-Warpway)	-	500	To be charged for pillow cover
3.1, Table-2(Tear Strength,-Weftway)	-	500	To be charged for pillow cover
3.1, Table-2(Fabric Skew, Percent, Max)	-	400	To be charged for pillow cover
3.1, Table-2(Fabric Bow, Percent, Max)	-	400	To be charged for pillow cover
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	500	To be charged for pillow cover
3.1, Table-2(Scouring Loss Percent, Max)	-	600	To be charged for pillow cover
3.1, Table-2(pH Value)	-	350	To be charged for pillow cover
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	400	To be charged for pillow cover
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	1200	To be charged for pillow cover
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	400	To be charged for pillow cover
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	350	To be charged for pillow cover
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	250	To be charged for pillow cover
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	400	To be charged for pillow cover
3.2(Fabric Content)	-	500	To be charged for pillow cover
3.3(Freedom from Defects)	-	800	To be charged for pillow cover
3.4(Sewing Thread)	-	600	To be charged for pillow cover
3.5(Hems)	-	400	To be charged for pillow cover
3.6(Sewing)	-	400	To be charged for pillow cover
3.7, Table-4(- Size)	-	400	To be charged for pillow cover
3.7, Table-4(Width,cm)	-	400	To be charged for pillow cover
3.7, Table-4(Length, cm)	-	400	To be charged for pillow cover
Cl-3.8(Soil Release Efficiency)	-	11500	To be charged for pillow cover
Cl-3.9(Antimicrobial Activity)	-	2800	To be charged for pillow cover
Cl-3.10(Whiteness Index)	-	750	To be charged for pillow cover

14 Dec, 2026

-
-

7217

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 13273 (1991)

Vitreous enamelled inner tanks for storage water heater - specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.2.1(1238)	-	5000	-
Cl. 5.3.2.1(1238)	-	0	-
Cl. 5.3.2.3(13273)	-	6000	-
Cl 5.3.2.2(13273)	-	6000	-
Cl. 5.3.3(13273)	-	500	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	0	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	0	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	0	-
Cl. 5.3.2.2(3972(P-2/Sec-1))	-	0	-
Cl. 5.3.2.5(13273)	-	3000	-
Cl. 5.4(13273)	-	2500	-
Cl. 5.5(13273)	-	5000	-

26 Jul, 2027

-
-

7218

CIPET, Vijayawada

6141334

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Regulated and unregulated

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	Nil
7.2(Flow path in emitters)	-	500	Nil
7.3.1(Resistance to Hydrostatic pressure)	-	1000	Nil
7.3.2(Resistance to Hydrostatic pressure)	-	0	Nil
7.3.3(Resistance to Hydrostatic pressure)	-	0	Nil
7.4.1(Emitter Pull Out In-line emitters)	-	500	Nil
7.4.2(Emitter Pull Out On-line emitters)	-	0	Nil
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	Nil
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	Nil
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Nil
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Nil
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	Nil
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	Nil
8.3(Determination of Emitter Exponent)	-	600	Nil
4(Classification)	-	0	Nil
5.1(Connections)	-	0	Nil
5.2(Emitter Ends)	-	0	Nil
5.3(Materials)	-	0	Nil
6.1(Test Specimens)	-	0	Nil
6.2(Test Conditions)	-	0	Nil
6.3(Accuracy or Measuring Devices)	-	0	Nil
7.1(Construction and Workmanship)	-	0	Nil
7.2(Flow Paths In Emitter)	-	0	Nil
7.3(Resistance to Hydrostatic Pressure)	-	0	Nil
7.4(Emitter Pull-out)	-	0	Nil
7.4.1(In-Line Emitters)	-	0	Nil
7.4.2(On-Line Emitters)	-	0	Nil
8.1(Uniformity of Emission Rate)	-	0	Nil
8.1.1(Number of Test Samples)	-	0	Nil
8.1.2(Unregulated Emitters)	-	0	Nil
8.1.3(Regulated Emitters)	-	0	Nil
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	Nil
8.2.1(Selection of Telt Sample)	-	0	Nil
8.2.2(Unregulated Emttters)	-	0	Nil
8.2.3(Regulated Emitters)	-	0	Nil
8.3(Determiaatlon of Emitter Exponent)	-	0	Nil
9(Marking)	-	0	Nil

06 Jun, 2027

-
Included w.e.f. 23.08.2024

7219

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16513 (2016)

Agro textiles “ Insect nets for agriculture and horticulture purposes “ Specification

21560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6/6.1( REQUIREMENTS Dimensions and Mass a) Length)	-	200	-
6/6.1( REQUIREMENTS Dimensions and Mass b) width)	-	200	-
6/6.1( REQUIREMENTS Dimensions and Mass c) Mass gm/m2)	-	0	-
4.2( Netting Fabric)	-	200	-
4/4.1(b) percent on avarage value; and( MATERIAL / HDPE Monofilament Yarn)	-	0	-
4/4.1(a) percent on individual value; and( MATERIAL / HDPE Monofilament Yarn)	-	0	-
4.2( Netting Fabric)	-	200	-
4.2( Netting Fabric)	-	200	-
5.0(types a) Type I — having mesh of 30; b) Type II — having mesh of 40; andc) c) Type III — having mesh of 50)	-	200	-
4/4.1.1/60°C / 95°C( MATERIAL / HDPE Monofilament Yarn)	-	1100	-
4.3( Colour)	-	200	-
6.2(Table-1)	-	250	-
4.1(Linear Density)	-	500	-
4.1.1(Heat Shrinkage)	-	900	-
6.2/2(Ends per Inch)	-	150	-
6.2/2(Picks per Inch)	-	150	-
6.2/3(cover factor)	-	900	-
6.2/4(Breaking strength before U.V. Exposure (MD & TD))	-	450	-
6.2/5(UV exposure 144 hours (100x65 + 44x40))	-	13860	-
6.2/5(Breaking strength after U.V. Exposure (MD & TD))	-	450	-
6.2/6(Bursting Pressure)	-	800	-
6.2/7(Air Permeability @ 50 pa water head pressure)	-	650	-

-
Included w.e.f 10.10.2024

7220

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	2500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	500	-
6(Freedom from defects:)	-	200	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	750	-
9.2, Table 3(Tensile Strength, MPa)	-	750	-
9.3, Table 3(Elongation ,Percent)	-	750	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	500	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	750	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
12(Diameter, mm)	-	100	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	100	-
12(Variation in Straightness)	-	200	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-	200	-
Cl. 12 Table 11,13 & 14(Thickness of Flat)	-	200	-
Cl. 12 Table 11,13 & 14(Width of Flat)	-	200	-
Cl. 12 Table 10 & 13(Hexagonal Size)	-	200	-
Cl. 12 Table 9(Out of Square)	-	200	-
Cl. 12 Table 10(Maximum Differences in Three Measurements for Hexagons)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	200	-
9.1/Table-3(0.2% proof stress/Yield stress)	-	750	-
12(Diameter)	-	100	-
9.4(Annealed Hardness)	-	500	-
Cl 9.1/Table-3(0.2% proof stress/Yield stress)	-	750	-
Cl 9.1/Table-3(Tensile strength)	-	750	-
Cl 9.1/Table-3(Elongation)	-	750	-
Cl12(Diameter)	-	100	-
Cl 9.4(Annealed Hardness)	-	500	-

19 Nov, 2027

-
Exclusion: Cl.4 (Corrosion test)

7221

Lauritz Knudsen Switchgear Testing Laboratories, MSW, SEIPL, Mumbai

7177626

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

2335000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	0	NO TEST
8.1.2.1(General materials requirements)	-	5000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.2.3(Test based on flammability category)	-	20000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	5000	-
8.1.5.1(Insulation)	-	2000	No Test
8.1.5.2(Direction of movement)	-	2000	No Test
8.1.5.3(Mounting)	-	2000	No Test
8.1.5.4(Protection)	-	2000	No Test
8.1.8(Terminals)	-	2000	No Test
8.1.8.1(General)	-	2000	No Test
8.1.8.2(Terminal identification and marking)	-	1000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	1000	-
8.1.10(Provisions for protective earthing)	-	1000	-
8.1.11(Enclosures for equipment)	-	1000	-
8.1.11.1(Design)	-	1000	No Test
8.1.11.2(Insulation)	-	1000	No Test
8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	25000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Voltage limiting components between circuits)	-	25000	-
9.1.5.2(Environment tests)	-	100000	-
9.3.6.3(Dielectric tests)	-	25000	-
M.9.5(Climatic test)	-	50000	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	-
M.9.11(Clearance and creepage distances)	-	5000	-
P.2.4.2(Test voltage)	-	25000	-
P.2.4.3(Application of the test voltage)	-	25000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.2.3(Accessible parts)	-	15000	-
8.2.2.4(Ambient air temperature)	-	15000	-
8.2.2.5(Main circuit)	-	15000	-
8.2.2.6(Control circuits)	-	15000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	15000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	15000	-
9.3.3.3.3(Temperature-rise of a part)	-	15000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	15000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	-
M.9.4(Thermal cycling test)	-	25000	-
8.1.17(Short-circuit and overload protection of ports)	-	45000	-
8.2.5.1(Performance under short-circuit conditions)	-	45000	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	45000	-
P.4(Test of MPSD for IT system)	-	45000	-
M.9.7(Critical load current test)	-	45000	-
Q.5.3(Selectivity determined by test)	-	45000	-
8.2.4.3.1(Mechanical durability)	-	90000	-
8.2.4.3.2(Electrical durability)	-	140000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	140000	-
9.3.3.6(Operational performance capability)	-	70000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	90000	-
P.2.3(Verification of operational performance capability)	-	40000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
9.3.5(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	15000	-
8.2.4.6(Pole impedance)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	5000	-
9.3.3.3.1(Ambient air temperature)	-	15000	-
8.1.14(Limited energy source)	-	1000	-
8.1.14.1(General)	-	1000	-
8.1.14.2(Limited energy source with galvanic separation)	-	1000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	1000	-
8.1.15(Stored charge energy circuit)	-	1000	-
8.1.16(Fault and abnormal conditions)	-	1000	-
8.2(Performance requirements)	-	20000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1.1(General conditions)	-	5000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	5000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	5000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	15000	-
8.2.1.5.1.2(Thermal memory test verification)	-	15000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	5000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	5000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	5000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	5000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	5000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	20000	-
9.3.6.2(Operation and operating limits)	-	20000	-
F.7.2(Tests on products in a new condition)	-	20000	-
F.7.3(Test after conventional operational performance)	-	20000	-
H.3(Limits of operation of control functions)	-	5000	-
H.4(Test of the control functions)	-	15000	-
8.3(Electromagnetic compatibility (EMC))	-	20000	NOT IN NABL SCOPE
8.3.2(Immunity)	-	20000	NOT IN NABL SCOPE
8.3.3(Emission)	-	20000	NOT IN NABL SCOPE
9.2.4(Limited energy source test)	-	5000	-
9.2.5(Breakdown of components)	-	5000	-
9.2.5.2(Breakdown of components test)	-	5000	-
9.4.2(Immunity)	-	20000	NOT IN NABL SCOPE
9.4.2.2(Electrostatic discharge)	-	20000	NOT IN NABL SCOPE
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	20000	NOT IN NABL SCOPE
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	20000	NOT IN NABL SCOPE
9.4.2.5(Electrical fast transient/bursts)	-	20000	NOT IN NABL SCOPE
9.4.2.6(Surges)	-	20000	NOT IN NABL SCOPE
9.4.2.7(Power frequency magnetic field)	-	20000	-
9.4.2.8(Voltage dips and short-time interruptions)	-	20000	NOT IN NABL SCOPE
9.4.2.9(Harmonics in the supply)	-	20000	NOT IN NABL SCOPE
9.4.3(Emission)	-	20000	NOT IN NABL SCOPE
M.8.3(Electromagnetic compatibility (EMC))	-	20000	NOT IN NABL SCOPE
N.3.2(Touch current measurement)	-	5000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	45000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	45000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	45000	-
9.3.4.2.2(prospective current)	-	1000	-
8.1.2(Materials)	-	0	NO TEST
8.1.2.1(General materials requirements)	-	5000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.2.3(Test based on flammability category)	-	20000	-
8.1.3(Current-carrying parts and their connections)	-	20000	-
8.1.4(Clearances and creepage distances)	-	5000	-
8.1.5.1(Insulation)	-	2000	NO TEST
8.1.5.2(Direction of movement)	-	2000	NO TEST
8.1.5.3(Mounting)	-	2000	NO TEST
8.1.5.4(Protection)	-	2000	NO TEST
8.1.8(Terminals)	-	2000	NO TEST
8.1.8.1(General)	-	2000	NO TEST
8.1.8.2(Terminal identification and marking)	-	1000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	1000	-
8.1.10(Provisions for protective earthing)	-	1000	-
8.1.11(Enclosures for equipment)	-	1000	-
8.1.11.1(Design)	-	2000	-
8.1.11.2(Insulation)	-	2000	-
8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	25000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Voltage limiting components between circuits)	-	25000	-
9.1.5.2(Environment tests)	-	100000	-
9.3.6.3(Dielectric tests)	-	25000	-
M.9.5(Climatic test)	-	50000	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	-
M.9.11(Clearance and creepage distances)	-	5000	-
P.2.4.2(Test voltage)	-	25000	-
P.2.4.3(Application of the test voltage)	-	25000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.2.3(Accessible parts)	-	15000	-
8.2.2.4(Ambient air temperature)	-	15000	-
8.2.2.5(Main circuit)	-	15000	-
8.2.2.6(Control circuits)	-	15000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	15000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	15000	-
9.3.3.3.3(Temperature-rise of a part)	-	15000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	15000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	-
M.9.4(Thermal cycling test)	-	25000	-
8.1.17(Short-circuit and overload protection of ports)	-	45000	-
8.2.5.1(Performance under short-circuit conditions)	-	45000	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	45000	-
P.4(Test of MPSD for IT system)	-	45000	-
M.9.7(Critical load current test)	-	45000	-
Q.5.3(Selectivity determined by test)	-	45000	-
8.2.4.3.1(Mechanical durability)	-	90000	-
8.2.4.3.2(Electrical durability)	-	140000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	140000	-
9.3.3.6(Operational performance capability)	-	70000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	90000	-
P.2.3(Verification of operational performance capability)	-	40000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
9.3.5(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	15000	-
8.2.4.6(Pole impedance)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	15000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	5000	-
9.3.3.3.1(Ambient air temperature)	-	15000	-
8.1.14(Limited energy source)	-	1000	-
8.1.14.1(General)	-	1000	-
8.1.14.2(Limited energy source with galvanic separation)	-	1000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	1000	-
8.1.15(Stored charge energy circuit)	-	1000	-
8.1.16(Fault and abnormal conditions)	-	1000	-
8.2(Performance requirements)	-	1000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1.1(General conditions)	-	5000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	5000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	5000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	15000	-
8.2.1.5.1.2(Thermal memory test verification)	-	15000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	5000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	5000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	5000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	5000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	5000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	5000	-
9.3.6.2(Operation and operating limits)	-	20000	-
F.7.2(Tests on products in a new condition)	-	20000	-
F.7.3(Test after conventional operational performance)	-	20000	-
H.3(Limits of operation of control functions)	-	5000	-
H.4(Test of the control functions)	-	15000	-
8.3(Electromagnetic compatibility (EMC))	-	20000	NOT IN NABL SCOPE
8.3.2(Immunity)	-	20000	NOT IN NABL SCOPE
9.2.4(Limited energy source test)	-	5000	-
9.2.5(Breakdown of components)	-	5000	-
9.2.5.2(Breakdown of components test)	-	5000	-
9.4.2(Immunity)	-	20000	NOT IN NABL SCOPE
9.4.2.2(Electrostatic discharge)	-	20000	NOT IN NABL SCOPE
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	20000	NOT IN NABL SCOPE
9.4.2.5(Electrical fast transient/bursts)	-	20000	NOT IN NABL SCOPE
9.4.2.6(Surges)	-	20000	NOT IN NABL SCOPE
9.4.2.7(Power frequency magnetic field)	-	20000	NOT IN NABL SCOPE
9.4.2.8(Voltage dips and short-time interruptions)	-	20000	NOT IN NABL SCOPE
9.4.2.9(Harmonics in the supply)	-	20000	NOT IN NABL SCOPE
M.8.3(Electromagnetic compatibility (EMC))	-	20000	NOT IN NABL SCOPE
N.3.2(Touch current measurement)	-	5000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	45000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	45000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	45000	-
9.3.4.2.2(prospective current)	-	1000	-

11 Apr, 2027

-
Included w.e.f. 17.09.2024 Exclusion: Cl.9.4.3 (Emission), Cl.8.3.3 (Emission), Cl.9.4.2.4 (Conducted disturbances induced by radio-frequency fields)

7222

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 210 (2009)

Grey iron castings - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	100	-
13(SIZE OF TEST BARS-Length)	-	100	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	750	-
16, Table 3(Hardness Test)	-	500	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
10.1(FREEDOM FROM DEFECTS)	-	200	-
10.2(FREEDOM FROM DEFECTS)	-	200	-
13(SIZE OF TEST BARS-Diameter)	-	100	-
13(SIZE OF TEST BARS-Length)	-	100	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	750	-
16, Table 3(Hardness Test)	-	500	-
9(Microstructure)	-	500	-
9(Microstructure)	-	500	-

19 Nov, 2027

-
Exclusion: Cl.17 (Transverse), Cl.18 (Hydrostatic)

7223

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14364 (2024)

Quaternary Ammonium Compound Based Surface Cleaner, Liquid ï¿½ Specification ( First Revision )

25800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Description)	-	800	Total testing charges including Keeping Quality are Rs. 25,800/- Testing charges excluding Keeping Quality are Rs. 12,900/-
Cl-4.3(Odour)	-	800	-
Cl-4.4(Colour)	-	800	-
Cl-4.5(Stability on Dilution)	-	1500	-
Cl-4.6(Cleaning Property)	-	1500	-
Cl-4.7(Applicability)	-	1500	-
Cl-4.8(Keeping Quality)	-	12900	-
Cl-4.8 & 4.9, Table-1 (i)(Total non-volatile matter, percent by mass, Min)	-	2000	-
Cl-4.8 & 4.9, Table-1 (ii)(pH)	-	1500	-
Cl-4.8 & 4.9, Table-1 (iii)(QAC content, percent by mass, Min)	-	2000	-
Cl-4.2(Composition)	-	500	-
Cl-6(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f. 12.09.2024

7224

CIPET, Hajipur

5118334

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

42280 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	25% discount for BIS.
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1000	Fabric Construction - Rs 500 Tape Width - Rs 500 25% discount for BIS.
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	Width of the Tape - Rs 500 25% discount for BIS.
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	25% discount for BIS.
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	25% discount for BIS.
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	25% discount for BIS.
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2700	Avg. breaking strength of Fabric (min) a. Length wise Rs 1100 b. Width wise Rs 1100 Specimen Preparation - Rs 500 25% discount for BIS.
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	500	25% discount for BIS.
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	Ash Content Rs 1200 25% discount for BIS.
5.3(Lamination)	-	2050	Mass of lamination film Rs 500 Total Mass of Laminated woven fabric Rs 500 Material Identification of lamination Rs 1050 25% discount for BIS.
5.4(Sack Fabrication)	-	1500	Sacks Construction Rs 500 Gromet construction & dimensions Rs 1000 25% discount for BIS.
5.5(Capacity)	-	500	Capacity Rs 500. 25% discount for BIS.
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	1500	Inside dimensions a) Bottom panel (L × W), mm Rs 500 b) Open top (L × W), mm Rs 500 c) Height (H), mm Rs 500 25% discount for BIS.
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	2200	"Breaking strength before UV Exposure (min) a) Length wise " 1100 b) Width wise 1100 25% discount for BIS.
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	10180	UV Resistance(192 hrs)* 8 hour at 60°C Light cycle without condensation, 4 hour at 50°C Dark cycle with condensation, Irradiance 0.63 W/m2 (100 x 60 +92 x40) Specimen / Conditioning * - Rs 10180
7(PRINTING, PACKAGING AND MARKING)	-	0	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	4450	Identification (Chemical Analysis) Rs 1050 Melt flow rate (MFR) Rs 1100 Linear Density Rs 700 Tanacity Rs 1100 Elongation of the Tape & Thickness of the Tape Rs 500 25% discount for BIS.
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	1900	Dimensional Stability (100 °C & 10 min.) Rs 700 Dimensional Stability (125 °C & 10 min.) Rs 700 GSM of Unlaminated fabric Rs 500 25% discount for BIS.
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	3750	Stitches Separation (Min), Outer stitches (Min) Depth of seam over doubled fold (Min) Rs 500 No Stitches per dm Rs1100 Bottom seam Construction Rs500 Stitching thread material Identification Rs1050 Breaking load of stitching thread Rs1100 25% disc
Clause 7.3(Marking on Sacks)	-	2000	Presence of UV stabiliser : Rs 2000 25% discount for BIS.
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	2700	Breaking strength after UV Exposure (min) a) Length wise " Rs 1100 b) Width wise Rs 1100 Specimen Preparation: Rs 500 25% discount for BIS.
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

07 Oct, 2028

-
Included w.e.f. 22.08.2024

7225

CIPET, Hajipur

5118334

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

38230 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	500	25% discount for BIS.
5.2 Table 1(Dimensions)	-	500	25% discount for BIS.
5.2 Table 1(Dimensions)	-	2900	Thickness of the Tape Width of the Tape Dimensional Stability (100 °C & 10 min.) Dimensional Stability (125 °C & 10 min.) Weight of fabric (unlaminated) 25% discount for BIS.
5.2 Table 1(Dimensions)	-	3150	Tape Width Mesh size Identification Melt flow rate (MFR) 25% discount for BIS.
5.2 Table 1(Dimensions)	-	2500	Linear Density of tape Tanacity & Elongation Density of tape Raw Material 25% discount for BIS.
5.2 Table 1(Ends per dm)	-	500	25% discount for BIS.
5.2 Table 1(Picks per dm)	-	500	25% discount for BIS.
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	1050	4.1 Raw Material identification Rs 1050 25% discount for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2700	Avg. breaking strength of Fabric & Elongation Length wise & Width wise 25% discount for BIS.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1100	Minimum breaking strength of Bottom seam 25% discount for BIS.
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600	Breaking Load of stitching thread 25% discount for BIS.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	2700	Breaking strength of fabric after 192 hrs of UV exposure length wise &Width wise 25% discount for BIS.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	Already Included
5.2 Table 1(Drop impact strength)	-	1600	25% discount for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	Ash content 25% discount for BIS.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	25% discount for BIS.
4.6(Capacity)	-	500	Sacks 25% discount for BIS.
4.3.1(Bottom Seam)	-	1500	1. Snitches Separation (Min) 2. Outer stitches (Min) 3. Depth of seam over doubled fold (Min) 25% discount for BIS.
4.3(Sacks)	-	0	25% discount for BIS.
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	3550	Bottom Seam –No Stitches per dm Stitching thread (Material Identification) Presence of UV stabiliser in stitching thread 25% discount for BIS.
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	Specimen Charge Breaking strength of fabric after 192 hrs of UV exposure[UV Resistance(192 hrs)*8 hour at 60°C Light cycle without condensation, 4 hour at 50°C Dark cycle with condensation,Irradiance 0.63 W/m2 (100 x 60 +92 x40)] 25% discount for BIS.
4.2(Linear Density)	-	0	25% discount for BIS.
4.2(Width of tape)	-	0	Already Included

07 Oct, 2028

-
Included w.e.f. 22.08.2024

7226

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	500	-
5.4.3(b)( Aggregate Abrasion Value)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	0	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	500	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	500	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.3(Elongation Index)	-	500	-
5.3(Flakiness Index)	-	500	-
5.6(Alkali Agregate Reaction )	-	500	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	500	-
Clause 5.6(Nature of Aggregate)	-	500	-
Clause 5.6(Dissolved Silica)	-	500	-
Clause 5.6(Reduction in Alkalinity)	-	500	-
Clause 5.1(General)	-	500	-
Clause 5.1(General)	-	500	-

19 Nov, 2027

-
Only for aggregates from natural sources

7227

CIPET, Hajipur

5118334

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

24150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	25% Discount for BIS.
4.1.2(Sack Width)	-	0	25% Discount for BIS.
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	Fabric Construction.25% Discount for BIS.
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	2150	Identification (Chemical Analysis) Melt flow rate (MFR) 25% Discount for BIS.
4.1.7(Width of Valve Sleeve)	-	1100	Tanacity Elongation of the Tape 25% Discount for BIS.
4.1.8(Length of Valve Sleeve)	-	1500	Sacks Construction Construction of top & bottom closures Filling valves construction 25% Discount for BIS.
5.1(Raw Material)	-	1050	25% Discount for BIS.
5.2(Fabric)	-	2400	Thickness of the Tape Width of the Tape Dimensional Stability (100 °C & 10 min.) Dimensional Stability (125 °C & 10 min.) 25% Discount for BIS.
5.2(Tape density and width)	-	700	Linear Density.25% Discount for BIS.
5.4(Lamination for PP)	-	1550	mass of lamination film & Material Identification of lamination .25% Discount for BIS.
5.4(Lamination for LDPE)	-	1000	Total mass of laminated woven fabric& Overhung width. 25% Discount for BIS.
6.1(Mass of Bale)	-	500	25% Discount for BIS.
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	2700	Length Wise (Rs 1100) & Width Wise (Rs 1100) Specimen Preparation (Rs 500). 25% Discount for BIS.
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	25% Discount for BIS.
6.3(Drop Impact Testing of Filled Sacks)	-	1100	25% Discount for BIS.
6.4(Ash Content)	-	1200	25% Discount for BIS.
6.5(Air Permeability)	-	1100	25% Discount for BIS.
8(Atomspheric Conditions for Conditioning and Testing)	-	500	Perforation Construction.25% Discount for BIS.
Cl-5.6(Capacity)	-	500	25% Discount for BIS.
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	25% Discount for BIS.
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	25% Discount for BIS.
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	2000	Dimensions: Sack, Closure, Patch and Valve, in mm. 25% Discount for BIS.

07 Oct, 2028

-
Included w.e.f. 22.08.2024

7228

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 14261 (1995)

Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification

V - Belts

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Material And Workmanship)	-	5000	-
Cl 5.1(Cross-Section Dimensions)	-	13000	-
Cl 5.2(Cross-Section Dimensions)	-	13000	-
Cl 6(DESIGNATION)	-	1000	-
Cl 7(Length Measurement And Tolerances)	-	7500	-
Cl 7.2.1(Determination of Pitch Length)	-	5000	-
Cl 7.2.2(Determination of Pitch Length)	-	3500	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-
Cl 4(Material And Workmanship)	-	0	-
Cl 5.1(Cross-Section Dimensions)	-	0	-
Cl 5.2(Cross-Section Dimensions)	-	0	-
Cl 6(DESIGNATION)	-	0	-
Cl 7(Length Measurement And Tolerances)	-	0	-
Cl 7.2.1(Determination of Pitch Length)	-	0	-
Cl 7.2.2(Determination of Pitch Length)	-	0	-
Cl 7.2.3(Determination of Pitch Length)	-	0	-
Cl 7.3(Matched Belts)	-	0	-

26 Jul, 2027

-
-

7229

BIS, Central Laboratory (CL)

None

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1, Table-1 (Fe)	-
Cl-6.1, Table-1 (Cu)	-
Cl-6.1, Table-1 (Mn)	-
Cl-6.1, Table-1 (Mg)	-
Cl-6.1, Table-1 (Cr)	-
Cl-6.1, Table-1 (Ni)	-
Cl-6.1, Table-1 (Zn)	-
Cl-6.1, Table-1 (Pb)	-
Cl-6.1, Table-1 (Sn)	-
Cl-6.1, Table-1 (Ti)	-
Cl-6.1, Table-1 (Others elements Each)	-
Cl-6.1, Table-1 (Others elements Total)	-
Cl-6.1, Table-1 (Aluminium)	-
Cl-6.2 (The chemical analysis)	-
Cl. 6 (Silicon)	-
Cl. 6 (Silver)	-
Cl. 6 (Zirconium)	-
Cl. 6 (Titanium+Zirconium)	-
Cl. 6 (Antimony)	-
Cl. 6 (Cobalt)	-
Cl. 6 (Antimony+Cobalt)	-
Cl. 6 (Beryllium)	-
Cl-7.2 (Tensile Tests)	-
Cl-7.4 (Hardness)	-
Cl-8 (Freedom from Defects)	-

-
-

7230

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

25 KG POLYMER BAG

20555 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Linear Density)	-	700	For Fabric tape: (Extra charges) Material Identification: 1050/- Melt Flow Index: 1100/- Mesh Size:500/- Tenacity: 1100/- Density (Raw Material): 700/-
4.2(Width of tape)	-	500	Clause No: 4.2 Thickness of tape: 500/- Heat Shrinkage: 1700/- Dimensional Stability: 700/- (Each condition) GSM: 500 Clause No: 4.1 (Optional) Raw Material Identification: 1050/-
4.3(Sacks)	-	500	Visual
4.3.1(Bottom Seam)	-	500	Outer Stitching: 500/- Depth of seam over double fold: 500/- No of Stitches per dm: 500/- Identification of Stitching material: 1050/- Breaking load of thread: 1100/- (500/- for sample preparation) Presence of UV in Thread, 2000/-
4.6(Capacity)	-	500	Extra charges as per Standard Clause no: 4.4 (For Lamination) Identification of Lamination: 2000/- GSM: 500/- Lamination overhang: 500/- For Clause no: 4.5 Identification of Liner: 2000/- Dimensions of Liner: 500/- Visual of Liner: 500/-
5.2 Table 1(Dimensions)	-	500	Including Length, Width & Width of the gusset
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	500	-
5.2 Table 1(Picks per dm)	-	500	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2700	2200/- Including Warp + Weft Direction (Avg. Breaking Strength + Elongation at break) and 500/- for Specimen preparation
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	1600	500 for sample preparation/Conditioning
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200	Ash Content
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2700	2200/- Including Warp + Weft Direction (Avg. Breaking Strength ) and 500/- for Specimen preparation
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
4.2(Linear Density)	-	0	-
4.2(Width of tape)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.6(Capacity)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0	-

09 Aug, 2026

-
Included w.e.f. 09.09.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number