| 7231 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur
| 7173804
| IS 18482 (2023) |
Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification |
Type-I to Type-VII (5,10, 20, 25, 30, 40 & 50kg ) |
35980 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Sack Type) |
- |
500.0 |
|
GST Charges Extra |
| 5.2.1(Fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.2.2(Linear density of tapes) |
- |
700.0 |
|
GST Charges Extra |
| 5.2.4(Unlaminated fabric mass) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.1.3(Total mass of BOPP film laminated woven fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.3.1.2.3(The total mass of nonwoven laminated woven fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.1(Sack) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.1.1(Centre seam) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.1.2(Bottom seam) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.2(Sack) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.3(Sack) |
- |
500.0 |
|
GST Charges Extra |
| 5.4.5(Liner) |
- |
500.0 |
|
GST Charges Extra |
| 6.1.1, Table 1(Inside length) |
- |
500.0 |
|
GST Charges Extra |
| 6.1.1, Table 1(Inside width) |
- |
0.0 |
|
- |
| 6.1.1, Table 1(Gusset width) |
- |
0.0 |
|
- |
| 6.1.1, Table 1(Warp per dm) |
- |
500.0 |
|
GST Charges Extra |
| 6.1.1, Table 1(Weft per dm) |
- |
500.0 |
|
GST Charges Extra |
| 6.1.1, Table 1(Mass of laminated fabric) |
- |
500.0 |
|
GST Charges Extra |
| 6.2, Table 1(Average breaking strength - Lengthwise) |
- |
1600.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| 6.2, Table 1(Average breaking strength - Widthwise) |
- |
1600.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| 6.2, Table 1(Breaking strength of bottom seam) |
- |
1600.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| 6.2, Table 1(Breaking strength of centre seam) |
- |
1600.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| 6.2, Table 1(Average elongation at break of fabric - Lengthwise) |
- |
0.0 |
|
- |
| 6.2, Table 1(Average elongation at break of fabric - Widthwise) |
- |
0.0 |
|
- |
| 6.3(Average breaking strength - Lengthwise after UV exposure) |
- |
11780.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges) + 10180 (UV Exposure Charges)=
(GST Charges Extra) |
| 6.3(Average breaking strength - Widthwise after UV exposure) |
- |
1600.0 |
|
Breaking Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| 6.4(Drop Impact Testing of Filled Sacks) |
- |
1600.0 |
|
Impact Test charges 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
500.0 |
|
GST Charges Extra |
| Clause 6.2.2(Stitch strength) |
- |
1100.0 |
|
GST Charges Extra |
| Clause 6.2.2(Weld seam strength) |
- |
1600.0 |
|
Seam Strength 1100.0 + 500.0 Sample preparation charges)=1600
(GST Charges Extra) |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
0.0 |
|
- |
| Clause 6.2.2(Stitch strength) |
- |
0.0 |
|
- |
| Clause 6.2.2(Weld seam strength) |
- |
0.0 |
|
- |
| Clause 6.5 Table 1 viii(Ash content) |
- |
1200.0 |
|
GST Charges Extra |
|
10 Sep, 2026 |
-
Included w.e.f. 20.08.2024 |
| 7232 |
BIS, Guwahati Branch Laboratory (GBL)
| None
| IS 723 (2023) |
Steel Countersunk Head Wire Nails � Specification ( Second Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Dimensions & tolerances (Except 120° angle)) |
- |
|
|
|
| 4.2 (Bend of shank) |
- |
|
|
|
| 6 (Finish) |
- |
|
|
|
| 7 (Bend test) |
- |
|
|
|
|
- |
-
- |
| 7233 |
CIPET, Madurai
| 6139834
| IS 14885 (2022) |
Polyethylene Pipes for the Supply of Gaseous Fuels � Specification (First Revision) |
16-355 |
402000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Grade of material) |
- |
500 |
|
25% Discount for BIS |
| 4.3(Nominal Diameter) |
- |
500 |
|
25% Discount for BIS |
| 4.4(Colour) |
- |
500 |
|
25% Discount for BIS |
| 5.1(Polyethylene
compound) |
- |
500 |
|
25% Discount for BIS |
| 5.3(Anti-oxidant) |
- |
500 |
|
25% Discount for BIS |
| 5.4(U-V stabilizer) |
- |
500 |
|
25% Discount for BIS |
| 5.7(PE Compound Quality Evaluation) |
- |
400000 |
|
25% Discount for BIS |
| 5.5(Effect of Gas
condensate on the
Hydrostatic strength) |
- |
1000 |
|
25% Discount for BIS
Specimen Charges 4000 |
| 5.6(Resistance to Weathering) |
- |
14500 |
|
25% Discount for BIS
Specimen Charges 1000 |
| 6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6)) |
- |
500 |
|
25% Discount for BIS |
| 6.1(Out of Roundness (Ovality)) |
- |
500 |
|
25% Discount for BIS |
| 6.2(Wall thickness (Take 8 reading and Average will be repoted)) |
- |
500 |
|
25% Discount for BIS |
| 7(Finish) |
- |
500 |
|
25% Discount for BIS |
| 8.1(Internal pressure creep
rupture test for plain at 80 deg. C for
165h) |
- |
4800 |
|
25% Discount for BIS
Specimen Charges 500 |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 20 deg. C for
100h) |
- |
4000 |
|
25% Discount for BIS
Specimen Charges 500 |
| 8.1(Internal pressure creep
rupture test for plain
pipes at 80 deg. C for
1000 h) |
- |
11000 |
|
25% Discount for BIS |
| 8.2(Reversion Test) |
- |
700 |
|
25% Discount for BIS |
| 8.3(Density) |
- |
700 |
|
25% Discount for BIS |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200 |
|
25% Discount for BIS |
| 8.7(Volatile Matter Content) |
- |
700 |
|
25% Discount for BIS |
| 8.8(Tensile Properties (Tensile Yield Strength and
Elongation at Break)) |
- |
700 |
|
25% Discount for BIS |
| 8.9(Resistance to Weathering) |
- |
14500 |
|
25% Discount for BIS
Specimen Charges 1000 |
| 6.4(Length of Pipe) |
- |
500 |
|
25% Discount for BIS |
| 8.4(Melt Flow Rate (MFR)) |
- |
1100 |
|
25% Discount for BIS |
| 8.5(Pigment Dispersion) |
- |
700 |
|
25% Discount for BIS |
| 8.10(Slow Crack Growth Rate Test) |
- |
11600 |
|
25% Discount for BIS
Specimen Charges 500/-
This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm |
| 8.11(Squeeze-off) |
- |
1300 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(i) Conventional density (of base polymer)) |
- |
700 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(ii) Melt flow rate (MFR)) |
- |
1100 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time)) |
- |
2200 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(iv) Volatile content) |
- |
700 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(v) Water content1)) |
- |
700 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 2(vi) Pigment dispersion) |
- |
700 |
|
25% Discount for BIS |
| 5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate) |
- |
11600 |
|
25% Discount for BIS
Specimen Charges 500/-
This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm |
| 5.3(Anti-Oxidant) |
- |
500 |
|
25% Discount for BIS |
| 5.4(U.V. Stabilizer) |
- |
2500 |
|
25% Discount for BIS |
| 5.5(Effects of Gas Condensate on the Hydrostatic Strength) |
- |
1000 |
|
25% Discount for BIS
Specimen Charges 4000/- |
| 5.6(ii) Hydraulic characteristics) |
- |
19800 |
|
Type Test 50 Deg C For 100 hrs 4000
Type Test 80 Deg C For 1000 hrs 11000
Acceptance Test 80 Deg C For 165 hrs 4800
25% Discount for BIS
Specimen Charges 1000/-
25% Discount for BIS |
| 5.6(iii) Thermal stability (Oxidation induction time)) |
- |
2200 |
|
25% Discount for BIS |
| 6(Dimensions of pipes) |
- |
500 |
|
25% Discount for BIS |
| 7(Finish) |
- |
500 |
|
25% Discount for BIS |
| 8.1(Hydraulic Characteristics) |
- |
19800 |
|
Type Test 50 Deg C For 100 hrs 4000
Type Test 80 Deg C For 1000 hrs 11000
Acceptance Test 80 Deg C For 165 hrs 4800
25% Discount for BIS
Specimen Charges 1000/- |
| 8.2(Reversion test) |
- |
700 |
|
25% Discount for BIS |
| 8.3(Density) |
- |
700 |
|
25% Discount for BIS |
| 8.4(Melt Flow Rate) |
- |
1100 |
|
25% Discount for BIS |
| 8.5(Pigment Dispersion) |
- |
700 |
|
25% Discount for BIS |
| 8.6(Thermal Stability (Oxidation Induction Time)) |
- |
2200 |
|
25% Discount for BIS |
| 8.7(Volatile Matter Content) |
- |
700 |
|
25% Discount for BIS |
| 8.9(Resistance to Weathering) |
- |
14500 |
|
25% Discount for BIS
Specimen Charges 1000/- |
| 8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break)) |
- |
1300 |
|
25% Discount for BIS
Specimen Charges 500/- |
| 8.10(Slow Crack Growth Rate Test) |
- |
11600 |
|
25% Discount for BIS
Specimen Charges 500/-
This Test Charges 8.10 Applicable for Wall thickness greater than 5 mm |
| 8.11(Squeeze-of) |
- |
1300 |
|
25% Discount for BIS |
| 10(Marking) |
- |
500 |
|
25% Discount for BIS |
|
22 May, 2027 |
-
Included w.e.f. 20.08.2024 |
| 7234 |
CIPET, Madurai
| 6139834
| IS 14735 (1999) |
Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - |
40-160mm |
11113 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 19(Marking) |
- |
500 |
|
25% Discount for BIS |
| 3(Type of Fitting) |
- |
500 |
|
25% Discount for BIS |
| 4(Size Designation) |
- |
500 |
|
25% Discount for BIS |
| 5(Colour of fittings) |
- |
500 |
|
25% Discount for BIS |
| 7.1,Table 1(Wall thickness) |
- |
500 |
|
25% Discount for BIS |
| 7.2 ,Table 2&3(Socket Dimensions) |
- |
500 |
|
25% Discount for BIS |
| 7.3(Dimensions of waste trap(Nahani Trap) |
- |
500 |
|
25% Discount for BIS |
| 8(Sealing Rings) |
- |
500 |
|
25% Discount for BIS |
| 10(Workmanship) |
- |
500 |
|
25% Discount for BIS |
| 11(Design requirements) |
- |
500 |
|
25% Discount for BIS |
| 11.1(Solvent cement type or Rubber ring type) |
- |
500 |
|
25% Discount for BIS |
| 11.2(Socket and spigot configeration) |
- |
500 |
|
25% Discount for BIS |
| 11.4,Table 5(Vent cowl) |
- |
500 |
|
25% Discount for BIS |
| 11.5,Table 6(Pipe Clips) |
- |
500 |
|
25% Discount for BIS |
| 12(Physical test requirements) |
- |
500 |
|
25% Discount for BIS |
| 12.1(Visual appearance) |
- |
500 |
|
25% Discount for BIS |
| 12.2(Stress relief test) |
- |
700 |
|
25% Discount for BIS |
| 12.3(Vicat softening tempewrature) |
- |
1100 |
|
25% Discount for BIS |
| Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid) |
- |
2000 |
|
25% Discount for BIS
Specimen Prepration Charge 500/- |
| Cl.14, Annex A(Titanium Di-Oxide Content) |
- |
1200 |
|
25% Discount for BIS |
| Cl.15, Annex B(Sulphated Ash Content) |
- |
1200 |
|
25% Discount for BIS |
| 16(Mechanical Properties) |
- |
1100 |
|
25% Discount for BIS |
| 16.1(Impact test) |
- |
1100 |
|
25% Discount for BIS |
| 17(Watet tightness of joint) |
- |
850 |
|
25% Discount for BIS |
| 12.4(Effect on water test) |
- |
3000 |
|
25% Discount for BIS |
| 7.4(Chamfer) |
- |
500 |
|
25% Discount for BIS |
| 11.3(Access Openings) |
- |
500 |
|
25% Discount for BIS |
| Table 4(Dimension of Access Openings) |
- |
500 |
|
25% Discount for BIS |
|
22 May, 2027 |
-
Included w.e.f. 20.08.2024 |
| 7235 |
CIPET, Madurai
| 6139834
| IS 14182 (1994) |
Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications |
16- 355 mm |
8263 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase) |
- |
500 |
|
25% discount for BIS |
| 4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, Decrease) |
- |
500 |
|
25% discount for BIS |
| 4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Increase) |
- |
500 |
|
25% discount for BIS |
| 4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Decrease) |
- |
500 |
|
25% discount for BIS |
| 4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers) |
- |
500 |
|
25% discount for BIS |
| 4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material ) |
- |
500 |
|
25% discount for BIS |
| 4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring) |
- |
500 |
|
25% discount for BIS |
| 4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water) |
- |
3000 |
|
25% discount for BIS |
| 4.6(Solvents systems consisting of blends of tetrahydrofuran and cyclohexanone have been found to be acceptable) |
- |
500 |
|
25% discount for BIS |
| 4.7(Vinyl Chloride Polymer content - Annex A) |
- |
1100 |
|
25% discount for BIS |
| 4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin) |
- |
500 |
|
25% discount for BIS |
| 4.5(REQUIREMENTS) |
- |
3000 |
|
25% discount for BIS |
| 4.6(REQUIREMENTS) |
- |
500 |
|
25% discount for BIS |
| 4.7 and 6.1(REQUIREMENTS - Vinyl Chloride Polymer Content) |
- |
1100 |
|
25% discount for BIS |
| 4.8(Dissolution) |
- |
500 |
|
25% discount for BIS |
| 4.9 and 6.1(Viscosity) |
- |
1100 |
|
25% discount for BIS |
| 4.9 and 6.1(Viscosity - Regular) |
- |
1100 |
|
25% discount for BIS |
| 4.9 and 6.1(Viscosity - Medium) |
- |
1100 |
|
25% discount for BIS |
| 4.9 and 6.1(Viscosity - Heavy ) |
- |
1100 |
|
25% discount for BIS |
| 4.10 and 6.1(Lap Shear Strength - After 2 h curing time) |
- |
1100 |
|
25% discount for BIS
Specimen Prepration Charges 500/- |
| 4.10 and 6.1(Lap Shear Strength - After 10 h curing time) |
- |
1100 |
|
25% discount for BIS
Specimen Prepration Charges 500/- |
| 4.10 and 6.1(Lap Shear Strength - After 72 h curing time) |
- |
1100 |
|
25% discount for BIS
Specimen Prepration Charges 500/- |
| 4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time) |
- |
850 |
|
25% discount for BIS
Specimen Prepration Charges 500/- |
| 4.7(Vinyl Chloride Polymer Content) |
- |
1100 |
|
25% discount for BIS |
| 4.8(Dissolution) |
- |
500 |
|
25% discount for BIS |
| 4.9(Viscosity) |
- |
1100 |
|
25% discount for BIS |
| 4.10(Lap Shear Strength) |
- |
1100 |
|
25% discount for BIS
Specimen Prepration Charges 500/- |
| 4.11(Hydrostatic Burst Strength) |
- |
850 |
|
- |
| 4.12(Shelf Life) |
- |
500 |
|
- |
| 6.1(Test) |
- |
500 |
|
25% discount for BIS |
| 6.2(Quality of Reagants) |
- |
500 |
|
25% discount for BIS |
| 7(Packing and Marking) |
- |
500 |
|
25% discount for BIS |
|
22 May, 2027 |
-
Included w.e.f. 20.08.2024 |
| 7236 |
Lauritz Knudsen Switchgear Testing Laboratories, MSW, SEIPL, Mumbai
| 7177626
| IS/IEC 60947 : PART 3 (2020) |
Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units |
- |
2189000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(General) |
- |
0 |
|
No Test |
| 4(Classification) |
- |
0 |
|
No Test |
| 5.3.2(Rated voltages) |
- |
2000 |
|
No Test |
| 5.3.2.1(Rated operational voltage) |
- |
2000 |
|
No Test |
| 5.3.2.2(Rated insulation voltage) |
- |
2000 |
|
No Test |
| 5.3.2.3(Rated impulse withstand voltage) |
- |
2000 |
|
No Test |
| 5.3.3(Currents) |
- |
2000 |
|
No Test |
| 5.3.3.2(Conventional free air thermal current) |
- |
2000 |
|
No Test |
| 5.3.3.3(Conventional enclosed thermal current) |
- |
2000 |
|
No Test |
| 5.3.3.4(Rated operational current (Ie) or rated operational power) |
- |
2000 |
|
No Test |
| 5.3.3.5(Rated uninterrupted current) |
- |
2000 |
|
No Test |
| 5.3.4(Rated frequency) |
- |
2000 |
|
No Test |
| 5.3.5(Rated duty) |
- |
2000 |
|
No Test |
| 5.3.5.2(Eight-hour duty) |
- |
2000 |
|
No Test |
| 5.3.5.3(Uninterrupted duty) |
- |
2000 |
|
No Test |
| 5.3.6.1(Ability to withstand motor switching overload currents) |
- |
2000 |
|
No Test |
| 5.3.6.2(Rated making capacity) |
- |
2000 |
|
No Test |
| 5.3.6.3(Rated breaking capacity) |
- |
2000 |
|
No Test |
| 5.3.7(Short-circuit characteristics) |
- |
2000 |
|
No Test |
| 5.3.7.1(Rated short-time withstand current) |
- |
2000 |
|
No Test |
| 5.3.7.2(Rated short-circuit making capacity) |
- |
2000 |
|
No Test |
| 5.3.7.4(Rated conditional short-circuit current) |
- |
2000 |
|
No Test |
| 5.4(Utilization category) |
- |
2000 |
|
No Test |
| 5.5(Control circuits) |
- |
2000 |
|
No Test |
| 5.6(Auxiliary circuits) |
- |
2000 |
|
No Test |
| 5.7(Relays and releases) |
- |
2000 |
|
No Test |
| 5.8(Co-ordination with short-circuit protective devices (SCPD)) |
- |
2000 |
|
No Test |
| 6.2.2(Marking) |
- |
1000 |
|
- |
| 6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling) |
- |
1000 |
|
- |
| 7(Normal service, mounting and transport conditions) |
- |
10000 |
|
- |
| 8.1.1(General) |
- |
20000 |
|
- |
| 8.1.2.2(Glow wire testing) |
- |
20000 |
|
- |
| 8.1.7.1(General) |
- |
5000 |
|
- |
| 8.2.3(Dielectric properties) |
- |
25000 |
|
- |
| 8.2.3.2(Impulse withstand voltage) |
- |
25000 |
|
- |
| 8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits) |
- |
25000 |
|
- |
| 8.2.7(Additional performance requirements for equipment suitable for isolation) |
- |
5000 |
|
- |
| 9.1.3.3(Dielectric test) |
- |
25000 |
|
- |
| 9.1.4(Sampling tests) |
- |
25000 |
|
- |
| 9.2(Compliance with constructional requirements) |
- |
25000 |
|
- |
| 9.3.4.3(Test of dielectric properties) |
- |
25000 |
|
- |
| 9.3.4.5(Dielectric verification) |
- |
25000 |
|
- |
| 9.3.4.6(Leakage current) |
- |
10000 |
|
- |
| 8.3(Electromagnetic compatibility tests) |
- |
20000 |
|
NOT IN NABL SCOPE |
| 9.5.4(Damp heat, salt mist, vibration and shock) |
- |
50000 |
|
- |
| D.7.1.1(Ambient air temperature) |
- |
1000 |
|
- |
| D.8.1.4(Clearances and creepage distances) |
- |
5000 |
|
- |
| D.8.1.12(Degrees of protection of enclosed equipment) |
- |
30000 |
|
- |
| D.9.3.11(Climatic test) |
- |
50000 |
|
- |
| E.9.3.1(Flexion test) |
- |
25000 |
|
- |
| E.9.3.2(Pull-out test) |
- |
25000 |
|
- |
| 8.1.7.2(Additional constructional requirements) |
- |
5000 |
|
- |
| 8.1.9(Additional requirements for equipment provided with a neutral pol) |
- |
1000 |
|
- |
| 8.2.5(Ability to make, break or withstand short-circuit currents) |
- |
45000 |
|
- |
| 8.2.8(Critical load current performance: DC equipment) |
- |
45000 |
|
- |
| 8.2.9(Overload requirements for equipment incorporating fuses) |
- |
45000 |
|
- |
| 9.3.3.6(DC test current ripple) |
- |
45000 |
|
- |
| 9.3.6.2(Short-time withstand current test) |
- |
45000 |
|
- |
| 9.3.6.3(Short-circuit making capacity test) |
- |
45000 |
|
- |
| 9.3.7.2(Circuit-breaker protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.7.3(Fuse protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.9.2(Determination of critical load current) |
- |
45000 |
|
- |
| 8.2.1(Operating conditions) |
- |
45000 |
|
- |
| 8.2.1.1(General) |
- |
5000 |
|
- |
| 8.2.1.2(Limits of operation of power operated equipment) |
- |
5000 |
|
- |
| 8.2.1.3(Limits of operation of under-voltage relays and releases) |
- |
5000 |
|
- |
| 8.2.1.4(Limits of operation of shunt releases) |
- |
5000 |
|
- |
| 8.2.4(Ability to make and break under no-load, normal load and overload conditions) |
- |
30000 |
|
- |
| 8.2.4.1(Making and breaking capacities) |
- |
30000 |
|
- |
| 8.2.4.2(Operational performance) |
- |
70000 |
|
- |
| 8.2.4.3(Mechanical durability) |
- |
90000 |
|
- |
| 8.2.4.4(Electrical durability) |
- |
140000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.5Special tests(Special tests) |
- |
140000 |
|
- |
| 9.3.4.4(Making and breaking capacities) |
- |
40000 |
|
- |
| 9.3.4.4.3(Characteristics of transient recovery voltage) |
- |
20000 |
|
- |
| 9.3.5.2(Operational performance test) |
- |
140000 |
|
- |
| 9.3.8.2(Overload test) |
- |
50000 |
|
- |
| 9.5.2(Mechanical durability) |
- |
90000 |
|
- |
| 9.5.3(Electrical durability) |
- |
140000 |
|
- |
| 8.2.2(Temperature-rise) |
- |
15000 |
|
- |
| 9.3.4.2(Temperature-rise) |
- |
15000 |
|
- |
| D.9.3.10(Thermal cycling test) |
- |
25000 |
|
- |
| D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only) |
- |
15000 |
|
- |
| E.9.2(Current cycling test) |
- |
20000 |
|
- |
| E.9.2.4(Temperature measurements) |
- |
15000 |
|
- |
| 3.1(General) |
- |
0 |
|
No test |
| 4(Classification) |
- |
0 |
|
No test |
| 5.3.2(Rated voltages) |
- |
2000 |
|
- |
| 5.3.2.1(Rated operational voltage) |
- |
2000 |
|
- |
| 5.3.2.2(Rated insulation voltage) |
- |
2000 |
|
- |
| 5.3.2.3(Rated impulse withstand voltage) |
- |
2000 |
|
- |
| 5.3.3(Currents) |
- |
2000 |
|
- |
| 5.3.3.2(Conventional free air thermal current) |
- |
2000 |
|
- |
| 5.3.3.3(Conventional enclosed thermal current) |
- |
2000 |
|
- |
| 5.3.3.4(Rated operational current (Ie) or rated operational power) |
- |
2000 |
|
- |
| 5.3.3.5(Rated uninterrupted current) |
- |
1999.99 |
|
- |
| 5.3.4(Rated frequency) |
- |
1999.99 |
|
- |
| 5.3.5(Rated duty) |
- |
2000 |
|
- |
| 5.3.5.2(Eight-hour duty) |
- |
2000 |
|
- |
| 5.3.5.3(Uninterrupted duty) |
- |
2000 |
|
- |
| 5.3.6.1(Ability to withstand motor switching overload currents) |
- |
2000 |
|
- |
| 5.3.6.2(Rated making capacity) |
- |
2000 |
|
- |
| 5.3.6.3(Rated breaking capacity) |
- |
2000 |
|
- |
| 5.3.7(Short-circuit characteristics) |
- |
2000 |
|
- |
| 5.3.7.1(Rated short-time withstand current) |
- |
2000 |
|
- |
| 5.3.7.2(Rated short-circuit making capacity) |
- |
2000 |
|
- |
| 5.3.7.4(Rated conditional short-circuit current) |
- |
2000 |
|
- |
| 5.4(Utilization category) |
- |
2000 |
|
- |
| 5.5(Control circuits) |
- |
2000 |
|
- |
| 5.6(Auxiliary circuits) |
- |
2000 |
|
- |
| 5.7(Relays and releases) |
- |
2000 |
|
- |
| 5.8(Co-ordination with short-circuit protective devices (SCPD)) |
- |
2000 |
|
- |
| 6.2.2(Marking) |
- |
1000 |
|
- |
| 6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling) |
- |
1000 |
|
- |
| 7(Normal service, mounting and transport conditions) |
- |
10000 |
|
- |
| 8.1.1(General) |
- |
20000 |
|
- |
| 8.1.2.2(Glow wire testing) |
- |
20000 |
|
- |
| 8.1.7.1(General) |
- |
5000 |
|
- |
| 8.2.3(Dielectric properties) |
- |
25000 |
|
- |
| 8.2.3.2(Impulse withstand voltage) |
- |
25000 |
|
- |
| 8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits) |
- |
25000 |
|
- |
| 8.2.7(Additional performance requirements for equipment suitable for isolation) |
- |
5000 |
|
- |
| 9.1.3.3(Dielectric test) |
- |
25000 |
|
- |
| 9.1.4(Sampling tests) |
- |
25000 |
|
- |
| 9.2(Compliance with constructional requirements) |
- |
25000 |
|
- |
| 9.3.4.3(Test of dielectric properties) |
- |
25000 |
|
- |
| 9.3.4.5(Dielectric verification) |
- |
25000 |
|
- |
| 9.3.4.6(Leakage current) |
- |
10000 |
|
- |
| 8.3(Electromagnetic compatibility tests) |
- |
20000 |
|
- |
| 9.5.4(Damp heat, salt mist, vibration and shock) |
- |
50000 |
|
- |
| D.7.1.1(Ambient air temperature) |
- |
1000 |
|
- |
| D.8.1.4(Clearances and creepage distances) |
- |
5000 |
|
- |
| D.8.1.12(Degrees of protection of enclosed equipment) |
- |
30000 |
|
- |
| D.9.3.11(Climatic test) |
- |
50000 |
|
- |
| E.9.3.1(Flexion test) |
- |
25000 |
|
- |
| E.9.3.2(Pull-out test) |
- |
25000 |
|
- |
| 8.1.7.2(Additional constructional requirements) |
- |
5000 |
|
- |
| 8.1.9(Additional requirements for equipment provided with a neutral pol) |
- |
1000 |
|
- |
| 8.2.5(Ability to make, break or withstand short-circuit currents) |
- |
45000 |
|
- |
| 8.2.8(Critical load current performance: DC equipment) |
- |
45000 |
|
- |
| 8.2.9(Overload requirements for equipment incorporating fuses) |
- |
45000 |
|
- |
| 9.3.3.6(DC test current ripple) |
- |
45000 |
|
- |
| 9.3.6.2(Short-time withstand current test) |
- |
45000 |
|
- |
| 9.3.6.3(Short-circuit making capacity test) |
- |
45000 |
|
- |
| 9.3.7.2(Circuit-breaker protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.7.3(Fuse protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.9.2(Determination of critical load current) |
- |
45000 |
|
- |
| 8.2.1(Operating conditions) |
- |
45000 |
|
- |
| 8.2.1.1(General) |
- |
5000 |
|
- |
| 8.2.1.2(Limits of operation of power operated equipment) |
- |
5000 |
|
- |
| 8.2.1.3(Limits of operation of under-voltage relays and releases) |
- |
5000 |
|
- |
| 8.2.1.4(Limits of operation of shunt releases) |
- |
5000 |
|
- |
| 8.2.4(Ability to make and break under no-load, normal load and overload conditions) |
- |
30000 |
|
- |
| 8.2.4.1(Making and breaking capacities) |
- |
30000 |
|
- |
| 8.2.4.2(Operational performance) |
- |
70000 |
|
- |
| 8.2.4.3(Mechanical durability) |
- |
90000 |
|
- |
| 8.2.4.4(Electrical durability) |
- |
140000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
5000 |
|
- |
| 9.1.5Special tests(Special tests) |
- |
140000 |
|
- |
| 9.3.4.4(Making and breaking capacities) |
- |
40000 |
|
- |
| 9.3.4.4.3(Characteristics of transient recovery voltage) |
- |
20000 |
|
- |
| 9.3.5.2(Operational performance test) |
- |
140000 |
|
- |
| 9.3.8.2(Overload test) |
- |
50000 |
|
- |
| 9.5.2(Mechanical durability) |
- |
90000 |
|
- |
| 9.5.3(Electrical durability) |
- |
140000 |
|
- |
| 8.2.2(Temperature-rise) |
- |
14999.99 |
|
- |
| 9.3.4.2(Temperature-rise) |
- |
15000 |
|
- |
| D.9.3.10(Thermal cycling test) |
- |
25000 |
|
- |
| D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only) |
- |
15000 |
|
- |
| E.9.2(Current cycling test) |
- |
20000 |
|
- |
| E.9.2.4(Temperature measurements) |
- |
15000 |
|
- |
| 3.1(General) |
- |
2000 |
|
NO TEST |
| 4(Classification) |
- |
2000 |
|
NO TEST |
| 5.3.2(Rated voltages) |
- |
2000 |
|
NO TEST |
| 5.3.2.1(Rated operational voltage) |
- |
2000 |
|
NO TEST |
| 5.3.2.2(Rated insulation voltage) |
- |
2000 |
|
NO TEST |
| 5.3.2.3(Rated impulse withstand voltage) |
- |
2000 |
|
NO TEST |
| 5.3.3(Currents) |
- |
2000 |
|
NO TEST |
| 5.3.3.2(Conventional free air thermal current) |
- |
2000 |
|
NO TEST |
| 5.3.3.3(Conventional enclosed thermal current) |
- |
2000 |
|
NO TEST |
| 5.3.3.4(Rated operational current (Ie) or rated operational power) |
- |
2000 |
|
NO TEST |
| 5.3.3.5(Rated uninterrupted current) |
- |
2000 |
|
NO TEST |
| 5.3.4(Rated frequency) |
- |
2000 |
|
NO TEST |
| 5.3.5(Rated duty) |
- |
2000 |
|
NO TEST |
| 5.3.5.2(Eight-hour duty) |
- |
2000 |
|
NO TEST |
| 5.3.5.3(Uninterrupted duty) |
- |
2000 |
|
NO TEST |
| 5.3.6.1(Ability to withstand motor switching overload currents) |
- |
2000 |
|
NO TEST |
| 5.3.6.2(Rated making capacity) |
- |
2000 |
|
NO TEST |
| 5.3.6.3(Rated breaking capacity) |
- |
2000 |
|
NO TEST |
| 5.3.7(Short-circuit characteristics) |
- |
2000 |
|
NO TEST |
| 5.3.7.1(Rated short-time withstand current) |
- |
2000 |
|
NO TEST |
| 5.3.7.2(Rated short-circuit making capacity) |
- |
2000 |
|
NO TEST |
| 5.3.7.4(Rated conditional short-circuit current) |
- |
2000 |
|
NO TEST |
| 5.4(Utilization category) |
- |
2000 |
|
NO TEST |
| 5.5(Control circuits) |
- |
2000 |
|
NO TEST |
| 5.6(Auxiliary circuits) |
- |
2000 |
|
N0 TEST |
| 5.7(Relays and releases) |
- |
2000 |
|
NO TEST |
| 5.8(Co-ordination with short-circuit protective devices (SCPD)) |
- |
2000 |
|
NO TEST |
| 6.2.2(Marking) |
- |
1000 |
|
- |
| 6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling) |
- |
1000 |
|
- |
| 7(Normal service, mounting and transport conditions) |
- |
10000 |
|
- |
| 8.1.1(General) |
- |
20000 |
|
- |
| 8.1.2.2(Glow wire testing) |
- |
20000 |
|
- |
| 8.1.7.1(General) |
- |
5000 |
|
- |
| 8.2.3(Dielectric properties) |
- |
25000 |
|
- |
| 8.2.3.2(Impulse withstand voltage) |
- |
25000 |
|
- |
| 8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits) |
- |
25000 |
|
- |
| 8.2.7(Additional performance requirements for equipment suitable for isolation) |
- |
5000 |
|
- |
| 9.1.3.3(Dielectric test) |
- |
25000 |
|
- |
| 9.1.4(Sampling tests) |
- |
25000 |
|
- |
| 9.2(Compliance with constructional requirements) |
- |
25000 |
|
- |
| 9.3.4.3(Test of dielectric properties) |
- |
25000 |
|
- |
| 9.3.4.5(Dielectric verification) |
- |
25000 |
|
- |
| 9.3.4.6(Leakage current) |
- |
10000 |
|
- |
| 8.3(Electromagnetic compatibility tests) |
- |
20000 |
|
NOT IN NABL SCOPE |
| 9.5.4(Damp heat, salt mist, vibration and shock) |
- |
50000 |
|
- |
| D.7.1.1(Ambient air temperature) |
- |
50000 |
|
- |
| D.8.1.4(Clearances and creepage distances) |
- |
5000 |
|
- |
| D.8.1.12(Degrees of protection of enclosed equipment) |
- |
30000 |
|
- |
| D.9.3.11(Climatic test) |
- |
50000 |
|
- |
| E.9.3.1(Flexion test) |
- |
25000 |
|
- |
| E.9.3.2(Pull-out test) |
- |
25000 |
|
- |
| 8.1.7.2(Additional constructional requirements) |
- |
5000 |
|
- |
| 8.1.9(Additional requirements for equipment provided with a neutral pol) |
- |
1000 |
|
- |
| 8.2.5(Ability to make, break or withstand short-circuit currents) |
- |
30000 |
|
- |
| 8.2.8(Critical load current performance: DC equipment) |
- |
45000 |
|
- |
| 8.2.9(Overload requirements for equipment incorporating fuses) |
- |
45000 |
|
- |
| 9.3.3.6(DC test current ripple) |
- |
45000 |
|
- |
| 9.3.6.2(Short-time withstand current test) |
- |
45000 |
|
- |
| 9.3.6.3(Short-circuit making capacity test) |
- |
45000 |
|
- |
| 9.3.7.2(Circuit-breaker protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.7.3(Fuse protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.9.2(Determination of critical load current) |
- |
45000 |
|
- |
| 8.2.1(Operating conditions) |
- |
45000 |
|
- |
| 8.2.1.1(General) |
- |
5000 |
|
- |
| 8.2.1.2(Limits of operation of power operated equipment) |
- |
5000 |
|
- |
| 8.2.1.3(Limits of operation of under-voltage relays and releases) |
- |
5000 |
|
- |
| 8.2.1.4(Limits of operation of shunt releases) |
- |
5000 |
|
- |
| 8.2.4(Ability to make and break under no-load, normal load and overload conditions) |
- |
30000 |
|
- |
| 8.2.4.1(Making and breaking capacities) |
- |
30000 |
|
- |
| 8.2.4.2(Operational performance) |
- |
70000 |
|
- |
| 8.2.4.3(Mechanical durability) |
- |
90000 |
|
- |
| 8.2.4.4(Electrical durability) |
- |
140000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.5Special tests(Special tests) |
- |
140000 |
|
- |
| 9.3.4.4(Making and breaking capacities) |
- |
40000 |
|
- |
| 9.3.4.4.3(Characteristics of transient recovery voltage) |
- |
20000 |
|
- |
| 9.3.5.2(Operational performance test) |
- |
140000 |
|
- |
| 9.3.8.2(Overload test) |
- |
50000 |
|
- |
| 9.5.2(Mechanical durability) |
- |
90000 |
|
- |
| 9.5.3(Electrical durability) |
- |
140000 |
|
- |
| 8.2.2(Temperature-rise) |
- |
15000 |
|
- |
| 9.3.4.2(Temperature-rise) |
- |
15000 |
|
- |
| D.9.3.10(Thermal cycling test) |
- |
15000 |
|
- |
| D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only) |
- |
15000 |
|
- |
| E.9.2(Current cycling test) |
- |
20000 |
|
- |
| E.9.2.4(Temperature measurements) |
- |
15000 |
|
- |
| 3.1(General) |
- |
2000 |
|
NO TEST |
| 4(Classification) |
- |
2000 |
|
NO TEST |
| 5.3.2(Rated voltages) |
- |
2000 |
|
NO TEST |
| 5.3.2.1(Rated operational voltage) |
- |
2000 |
|
NO TEST |
| 5.3.2.2(Rated insulation voltage) |
- |
2000 |
|
NO TEST |
| 5.3.2.3(Rated impulse withstand voltage) |
- |
2000 |
|
NO TEST |
| 5.3.3(Currents) |
- |
2000 |
|
NO TEST |
| 5.3.3.2(Conventional free air thermal current) |
- |
2000 |
|
NO TEST |
| 5.3.3.3(Conventional enclosed thermal current) |
- |
2000 |
|
NO TEST |
| 5.3.3.4(Rated operational current (Ie) or rated operational power) |
- |
2000 |
|
NO TEST |
| 5.3.3.5(Rated uninterrupted current) |
- |
2000 |
|
NO TEST |
| 5.3.4(Rated frequency) |
- |
2000 |
|
NO TEST |
| 5.3.5(Rated duty) |
- |
2000 |
|
NO TEST |
| 5.3.5.2(Eight-hour duty) |
- |
2000 |
|
NO TEST |
| 5.3.5.3(Uninterrupted duty) |
- |
2000 |
|
NO TEST |
| 5.3.6.1(Ability to withstand motor switching overload currents) |
- |
2000 |
|
NO TEST |
| 5.3.6.2(Rated making capacity) |
- |
2000 |
|
NO TEST |
| 5.3.6.3(Rated breaking capacity) |
- |
2000 |
|
NO TEST |
| 5.3.7(Short-circuit characteristics) |
- |
2000 |
|
NO TEST |
| 5.3.7.1(Rated short-time withstand current) |
- |
2000 |
|
NO TEST |
| 5.3.7.2(Rated short-circuit making capacity) |
- |
2000 |
|
NO TEST |
| 5.3.7.4(Rated conditional short-circuit current) |
- |
2000 |
|
NO TEST |
| 5.4(Utilization category) |
- |
2000 |
|
NO TEST |
| 5.5(Control circuits) |
- |
2000 |
|
NO TEST |
| 5.6(Auxiliary circuits) |
- |
2000 |
|
NO TEST |
| 5.7(Relays and releases) |
- |
2000 |
|
NO TEST |
| 5.8(Co-ordination with short-circuit protective devices (SCPD)) |
- |
2000 |
|
NO TEST |
| 6.2.2(Marking) |
- |
1000 |
|
- |
| 6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling) |
- |
1000 |
|
- |
| 7(Normal service, mounting and transport conditions) |
- |
10000 |
|
- |
| 8.1.1(General) |
- |
20000 |
|
- |
| 8.1.2.2(Glow wire testing) |
- |
20000 |
|
- |
| 8.1.7.1(General) |
- |
5000 |
|
- |
| 8.2.3(Dielectric properties) |
- |
25000 |
|
- |
| 8.2.3.2(Impulse withstand voltage) |
- |
25000 |
|
- |
| 8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits) |
- |
25000 |
|
- |
| 8.2.7(Additional performance requirements for equipment suitable for isolation) |
- |
5000 |
|
- |
| 9.1.3.3(Dielectric test) |
- |
25000 |
|
- |
| 9.1.4(Sampling tests) |
- |
25000 |
|
- |
| 9.2(Compliance with constructional requirements) |
- |
25000 |
|
- |
| 9.3.4.3(Test of dielectric properties) |
- |
25000 |
|
- |
| 9.3.4.5(Dielectric verification) |
- |
25000 |
|
- |
| 9.3.4.6(Leakage current) |
- |
10000 |
|
- |
| 8.3(Electromagnetic compatibility tests) |
- |
20000 |
|
NOT IN NABL SCOPE |
| 9.5.4(Damp heat, salt mist, vibration and shock) |
- |
50000 |
|
- |
| D.7.1.1(Ambient air temperature) |
- |
1000 |
|
- |
| D.8.1.4(Clearances and creepage distances) |
- |
5000 |
|
- |
| D.8.1.12(Degrees of protection of enclosed equipment) |
- |
30000 |
|
- |
| D.9.3.11(Climatic test) |
- |
50000 |
|
- |
| E.9.3.1(Flexion test) |
- |
25000 |
|
- |
| E.9.3.2(Pull-out test) |
- |
25000 |
|
- |
| 8.1.7.2(Additional constructional requirements) |
- |
5000 |
|
- |
| 8.1.9(Additional requirements for equipment provided with a neutral pol) |
- |
1000 |
|
- |
| 8.2.5(Ability to make, break or withstand short-circuit currents) |
- |
45000 |
|
- |
| 8.2.8(Critical load current performance: DC equipment) |
- |
45000 |
|
- |
| 8.2.9(Overload requirements for equipment incorporating fuses) |
- |
45000 |
|
- |
| 9.3.3.6(DC test current ripple) |
- |
45000 |
|
- |
| 9.3.6.2(Short-time withstand current test) |
- |
45000 |
|
- |
| 9.3.6.3(Short-circuit making capacity test) |
- |
45000 |
|
- |
| 9.3.7.2(Circuit-breaker protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.7.3(Fuse protected short-circuit withstand) |
- |
45000 |
|
- |
| 9.3.9.2(Determination of critical load current) |
- |
45000 |
|
- |
| 8.2.1(Operating conditions) |
- |
45000 |
|
- |
| 8.2.1.1(General) |
- |
5000 |
|
- |
| 8.2.1.2(Limits of operation of power operated equipment) |
- |
5000 |
|
- |
| 8.2.1.3(Limits of operation of under-voltage relays and releases) |
- |
5000 |
|
- |
| 8.2.1.4(Limits of operation of shunt releases) |
- |
5000 |
|
- |
| 8.2.4(Ability to make and break under no-load, normal load and overload conditions) |
- |
30000 |
|
- |
| 8.2.4.1(Making and breaking capacities) |
- |
30000 |
|
- |
| 8.2.4.2(Operational performance) |
- |
70000 |
|
- |
| 8.2.4.3(Mechanical durability) |
- |
90000 |
|
- |
| 8.2.4.4(Electrical durability) |
- |
140000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.3.2(Mechanical operation test) |
- |
50000 |
|
- |
| 9.1.5Special tests(Special tests) |
- |
140000 |
|
- |
| 9.3.4.4(Making and breaking capacities) |
- |
50000 |
|
- |
| 9.3.4.4.3(Characteristics of transient recovery voltage) |
- |
20000 |
|
- |
| 9.3.5.2(Operational performance test) |
- |
140000 |
|
- |
| 9.3.8.2(Overload test) |
- |
50000 |
|
- |
| 9.5.2(Mechanical durability) |
- |
90000 |
|
- |
| 9.5.3(Electrical durability) |
- |
140000 |
|
- |
| 8.2.2(Temperature-rise) |
- |
15000 |
|
- |
| 9.3.4.2(Temperature-rise) |
- |
15000 |
|
- |
| D.9.3.10(Thermal cycling test) |
- |
25000 |
|
- |
| D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only) |
- |
15000 |
|
- |
| E.9.2(Current cycling test) |
- |
20000 |
|
- |
| E.9.2.4(Temperature measurements) |
- |
15000 |
|
- |
|
11 Apr, 2027 |
-
Included w.e.f. 17.09.2024 |
| 7237 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun
| 9178004
| IS 18482 (2023) |
Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification |
- |
24880.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Sack Type) |
- |
0.00 |
|
- |
| 5.2.1(Fabric) |
- |
0.00 |
|
- |
| 5.2.2(Linear density of tapes) |
- |
500.00 |
|
- |
| 5.2.4(Unlaminated fabric mass) |
- |
500.00 |
|
- |
| 5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination) |
- |
500.00 |
|
- |
| 5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric) |
- |
0.00 |
|
- |
| 5.3.1.1.3(Total mass of BOPP film laminated woven fabric) |
- |
0.00 |
|
- |
| 5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination) |
- |
0.00 |
|
- |
| 5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric) |
- |
0.00 |
|
- |
| 5.3.1.2.3(The total mass of nonwoven laminated woven fabric) |
- |
0.00 |
|
- |
| 5.4.1(Sack) |
- |
2000.00 |
|
- |
| 5.4.1.1(Centre seam) |
- |
1600.00 |
|
- |
| 5.4.1.2(Bottom seam) |
- |
1600.00 |
|
- |
| 5.4.2(Sack) |
- |
0.00 |
|
- |
| 5.4.3(Sack) |
- |
0.00 |
|
- |
| 5.4.5(Liner) |
- |
0.00 |
|
- |
| 6.1.1, Table 1(Inside length) |
- |
500.00 |
|
- |
| 6.1.1, Table 1(Inside width) |
- |
0.00 |
|
- |
| 6.1.1, Table 1(Gusset width) |
- |
0.00 |
|
- |
| 6.1.1, Table 1(Warp per dm) |
- |
500.00 |
|
- |
| 6.1.1, Table 1(Weft per dm) |
- |
0.00 |
|
- |
| 6.1.1, Table 1(Mass of laminated fabric) |
- |
0.00 |
|
- |
| 6.2, Table 1(Average breaking strength - Lengthwise) |
- |
1600.00 |
|
- |
| 6.2, Table 1(Average breaking strength - Widthwise) |
- |
1600.00 |
|
- |
| 6.2, Table 1(Breaking strength of bottom seam) |
- |
1600.00 |
|
- |
| 6.2, Table 1(Breaking strength of centre seam) |
- |
0.00 |
|
- |
| 6.2, Table 1(Average elongation at break of fabric - Lengthwise) |
- |
0.00 |
|
- |
| 6.2, Table 1(Average elongation at break of fabric - Widthwise) |
- |
0.00 |
|
- |
| 6.3(Average breaking strength - Lengthwise after UV exposure) |
- |
0.00 |
|
- |
| 6.4(Drop Impact Testing of Filled Sacks) |
- |
900.00 |
|
- |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
0.00 |
|
- |
| Clause 6.2.2(Stitch strength) |
- |
0.00 |
|
- |
| Clause 6.2.2(Weld seam strength) |
- |
1600.00 |
|
- |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
0.00 |
|
- |
| Clause 6.2.2(Stitch strength) |
- |
0.00 |
|
- |
| Clause 6.2.2(Weld seam strength) |
- |
0.00 |
|
- |
| Clause 6.5 Table 1 viii(Ash content) |
- |
1200.00 |
|
- |
| 6.3(Average breaking strength - Widthwise after UV exposure) |
- |
11780.00 |
|
UV Charge- 10180.00
Breaking strength- 1600.00 |
|
24 Apr, 2027 |
-
Included w.e.f. 20.08.2024 |
| 7238 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 18573 (2024) |
Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes � Specification |
- |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. 3.0(Types) |
- |
200 |
|
- |
| Clause.4.0(Carbon) |
- |
500 |
|
- |
| Clause.4.0(Sulphur) |
- |
500 |
|
- |
| Clause.4.0(Sulphur) |
- |
500 |
|
- |
| Clause.4.0(Phosphorus) |
- |
500 |
|
- |
| Clause.4.0(Silicon) |
- |
500 |
|
- |
| Clause.4.0(Manganese) |
- |
500 |
|
- |
| Clause.6.0(Workmanship) |
- |
500 |
|
- |
| Clause.7.0(Straightness) |
- |
200 |
|
- |
| Clause.9.0(Length) |
- |
200 |
|
- |
| Clause.10.0(Dimensions and properties) |
- |
200 |
|
- |
| Clause.11.0(General) |
- |
200 |
|
- |
| Clause.11.0(Outside Dimension) |
- |
200 |
|
- |
| Clause.11.0(Thickness) |
- |
200 |
|
- |
| Clause.11.0(Thickness) |
- |
200 |
|
- |
| Clause.11.0(Concavity and Convexity) |
- |
200 |
|
- |
| Clause.11.0(Squareness of Sides) |
- |
200 |
|
- |
| Clause.11.0(External Corner Radiius) |
- |
200 |
|
- |
| Clause.11.0(Straightness and twist) |
- |
200 |
|
- |
| Clause.12.0(Dimension Tolerances) |
- |
500 |
|
- |
| Clause.12.0(Dimension Tolerances) |
- |
500 |
|
- |
| Clause.13.0(Surface Protection) |
- |
500 |
|
- |
| Clause.15.0(Tensile test) |
- |
750 |
|
- |
| Clause.15.0(Yield strength) |
- |
750 |
|
- |
| Clause.15.0(Elognation Percent) |
- |
750 |
|
- |
| 6(Workmanship) |
- |
200 |
|
- |
| 10(Dimensions and Properties) |
- |
200 |
|
- |
| 11(Measurement of Shape and Size) |
- |
200 |
|
- |
| 12(Dimensions and Tolerances) |
- |
500 |
|
- |
| 13(Surface Protection) |
- |
500 |
|
- |
| 15(Tensile Test) |
- |
750 |
|
- |
| Clause.10.0(Dimensions and properties) |
- |
500 |
|
- |
|
19 Nov, 2027 |
-
- |
| 7239 |
IEC TEST LABS LLP
| 8165726
| IS 7098 : Part 1 (1988) |
Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(CONDUCTOR: MATERIALS) |
- |
1000 |
|
10% discount to BIS |
| 6(ARMOURING) |
- |
1000 |
|
10% discount to BIS |
| 7(OUTER SHEATH) |
- |
1000 |
|
10% discount to BIS |
| 8.1(CONDUCTOR: CONSTRUCTION) |
- |
1000 |
|
10% discount to BIS |
| 5.1(FILLER AND INNER SHEATH) |
- |
1000 |
|
10% discount to BIS |
| 5.2(FILLER AND INNER SHEATH) |
- |
1000 |
|
10% discount to BIS |
| 8.2(PROTECTIVE BARRIER) |
- |
1000 |
|
10% discount to BIS |
| 8.3(SIZE OF NEUTRAL CONDUCTOR) |
- |
1000 |
|
10% discount to BIS |
| 9.1(Insulation Applied by extrusicn) |
- |
1000 |
|
10% discount to BIS |
| 9.2(Thickness of Insulation - Average) |
- |
1000 |
|
10% discount to BIS |
| 9.3(Thickness of Insulation - Minimum) |
- |
1000 |
|
10% discount to BIS |
| 9.4(Application of Insulation) |
- |
1000 |
|
- |
| 10.1(Core Identification) |
- |
1000 |
|
10% discount to BIS |
| 10.2(Core Identification- Neutral) |
- |
1000 |
|
10% discount to BIS |
| 10.3(Core Identification by number ) |
- |
1000 |
|
10% discount to BIS |
| 10.4(Core Identification by number - Neutral ) |
- |
1000 |
|
10% discount to BIS |
| 11(LAVING UP OF CORES) |
- |
1000 |
|
10% discount to BIS |
| 12.1 & 12.2(Inner sheath : Application) |
- |
1000 |
|
10% discount to BIS |
| 12.3(Thickness of Inner Sheath) |
- |
1000 |
|
10% discount to BIS |
| 13.1(Armouring: Application) |
- |
1000 |
|
10% discount to BIS |
| 13.1.2(Armouring: Coverage ) |
- |
1000 |
|
10% discount to BIS |
| 13.1.3(Armouring: Direction of Lay ) |
- |
1000 |
|
10% discount to BIS |
| 13.2(Type of armour ) |
- |
1000 |
|
10% discount to BIS |
| 13.3(Armouring : Dimensions -Wire Diameter) |
- |
1000 |
|
10% discount to BIS |
| 13.3(Armouring : Dimensions -Formed wire ) |
- |
1000 |
|
10% discount to BIS |
| 13.4(Armour: Joint) |
- |
1000 |
|
10% discount to BIS |
| 13.5(Armouring : Resistance Test) |
- |
1000 |
|
10% discount to BIS |
| 13.6 a)(ARMOURING: Tensile Strength) |
- |
1000 |
|
10% discount to BIS |
| 13.6 b)(ARMOURING: Elongation ) |
- |
1000 |
|
10% discount to BIS |
| 13.6 c)(ARMOURING: Torsion Test (For round wire ) ) |
- |
1000 |
|
10% discount to BIS |
| 13.6 d)(ARMOURING: Winding Test(For formed wire)) |
- |
1000 |
|
10% discount to BIS |
| 13.6 e)(ARMOURING: Uniformity of zinc coating) |
- |
1000 |
|
10% discount to BIS |
| 13.6 f)(ARMOURING: Mass of zinc coating ) |
- |
1000 |
|
10% discount to BIS |
| 13.6 g)(ARMOURING: Resistivity) |
- |
1000 |
|
- |
| 14.1(Outer Sheath : Application) |
- |
1000 |
|
- |
| 14.2(Colour of outer sheath) |
- |
1000 |
|
- |
| 14.3(Thickness of outer sheath - AVERAGE) |
- |
1000 |
|
- |
| 14.3(Thickness of outer sheath - minimum) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) i)(Annealing Test ( For copper wire ) ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) ii)(Tensile test (for aluminium) - Before stranding ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) ii)(Tensile test (for aluminium) - After stranding ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) iii)(Wrapping test (for aluminium)) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) iv)(Resistance test - Main conductor) |
- |
1000 |
|
10% discount to BIS |
| 15.1 a) iv)(Resistance test - Neutral conductor) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) i) (Phyaical tests for insulation : Tensile Test) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) i) (Phyaical tests for insulation : Elongation) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) iii) (Phyaical tests for insulation : Hot set ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) iv) (Phyaical tests for insulation : Shrinkage ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) v) (Insulation: Waterabsorption(gravimetric)) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) i) (Physical tests for outer sheath : Tensile stregth) |
- |
1000 |
|
- |
| 15.1 e) i) (Physical tests for outer sheath : Elongation) |
- |
1000 |
|
- |
| 15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
1000 |
|
- |
| 15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
1000 |
|
- |
| 15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
1000 |
|
- |
| 15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) iii) (Sheath: Loss of mass in air oven) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) iv) (Phyaical tests for Sheath : Shrinkage ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) v) (Sheath : Hot deformation) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) vi) (Sheath : Heat shock test) |
- |
1000 |
|
10% discount to BIS |
| 15.1 e) vii) (Sheath : Thermalstability) |
- |
1000 |
|
10% discount to BIS |
| 15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity ) |
- |
1000 |
|
10% discount to BIS |
| 16.2(HIGH VOLTAGE TEST ) |
- |
1000 |
|
10% discount to BIS |
| 16.3(FLAMMABILITY TEST : Period of Burning ) |
- |
1000 |
|
10% discount to BIS |
| 16.3(FLAMMABILITY TEST : Unaffected length ) |
- |
1000 |
|
10% discount to BIS |
| 16.9(Oxygen Index Test) |
- |
1000 |
|
10% discount to BIS |
| 16.1(Flame Retardance Test on Single Cables) |
- |
1000 |
|
10% discount to BIS |
| 16.11(Flame Retardance Test on Bunched Cables) |
- |
1000 |
|
10% discount to BIS |
| 16.13(Test for Halogen Acid Gas Evolution) |
- |
1000 |
|
10% discount to BIS |
| 16.14(Temperature Index) |
- |
1000 |
|
10% discount to BIS |
| 17.1(Manufacturer'. identification) |
- |
1000 |
|
10% discount to BIS |
| 17.2(cable Indentification ) |
- |
1000 |
|
10% discount to BIS |
| 17.3(cable Code ) |
- |
1000 |
|
10% discount to BIS |
| 15.4 (a)(Cold bend) |
- |
1000 |
|
10% discount to BIS |
| 15.4 (b)(Cold impact) |
- |
1000 |
|
10% discount to BIS |
| Table 1(Ageing in air oven - Elongation on Insulation) |
- |
1000 |
|
10% discount to BIS |
| Table 1(Ageing in air oven - Tensile strength on Insulation) |
- |
1000 |
|
10% discount to BIS |
| Table 1(Ageing in air oven - Elongation on Insulation) |
- |
1000 |
|
10% discount to BIS |
| Table 1(Ageing in air oven - Tensile strength on Insulation) |
- |
1000 |
|
10% discount to BIS |
| Table 4(Copper purity test) |
- |
1000 |
|
10% discount to BIS |
| Cl No. 16.15(Smoke density test) |
- |
1000 |
|
10% discount to BIS |
| Table 2(Cold Impact test for Outer sheath) |
- |
1000 |
|
10% discount to BIS |
| Table 2(Cold bend test for Outer sheath) |
- |
1000 |
|
10% discount to BIS |
| Cl 16(Halogen Acid Gas Test) |
- |
1000 |
|
10% discount to BIS |
| Cl 16(Halogen Acid Gas Test) |
- |
1000 |
|
10% discount to BIS |
| Cl 16(Halogen Acid Gas Test) |
- |
1000 |
|
10% discount to BIS |
| 4(INSULATION : MATERIALS) |
- |
1000 |
|
10% discount to BIS |
| 15.1 d) iii) (Phyaical tests for insulation : Permanent set ) |
- |
1000 |
|
10% discount to BIS |
|
07 Sep, 2026 |
-
Included w.e.f. 11-09-2024. |
| 7240 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 280 (2006) |
Mild steel wire for general engineering purposes (Fourth Revision) |
Light,Medium and Heavy Coated (3.15 mm to 12.5 mm) |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters) |
- |
2000 |
|
For complete Cl 7 and 8 |
| Cl 9(Tensile Test On UTM) |
- |
1500 |
|
For Complete Cl 9 |
| Cl 11(Workmanship) |
- |
500 |
|
For complete Cl 11 |
| Cl 13(Workmanship) |
- |
500 |
|
For complete Cl 13 |
| 7 & 8(Ovality) |
- |
2000 |
|
For complete Cl 7 and Cl 8 |
| 7 & 8(Diameter) |
- |
2000 |
|
For complete Cl 7 and Cl 8 |
| 9.2(Wrapping Test) |
- |
1500 |
|
For complete Cl 9 |
| 9.3(Bend test) |
- |
1500 |
|
For complete Cl 9 |
| 10(Finish) |
- |
500 |
|
For complete Cl 10 |
| 11(Coating test) |
- |
500 |
|
For complete Cl 11 |
| 13(Freedom from defects) |
- |
500 |
|
For complete Cl 11 |
| 6 AND AS PER IS 7887(MICRO ALLOY) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(ALUMINIUM) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(PHOSPHORUS) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(SULPHUR) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(MANGANESE) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(SILICON) |
- |
1000 |
|
For complete Chemical testing, if required |
| 6 AND AS PER IS 7887(CARBON) |
- |
1000 |
|
For complete Chemical testing, if required |
|
04 Dec, 2028 |
-
- |
| 7241 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 15658 (2021) |
Concrete Paving Blocks - Specification ( First Revision ) |
M-30, M35, M40, M50, M55 |
15800 View breakup
Rs.18600/- for without optional requirements, Rs.21000/- for complete testing
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clauses 7.1.2 & 9.1.2
(Visual Inspection) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (i)
(Width, W) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (i)
(Indivdual Width, W) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (ii)
(Length, L) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (ii)
(Indivdual Length, L) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (iii)
(Thickness, Th) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (iii)
(Indivdual Thickness, Th) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (iv)
(Aspect Ratio, L/Th) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2, Table No. 2, SI No. (iv)
(Indivdual Aspect Ratio, L/Th) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp)) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp)) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption) |
- |
2500 |
|
For Complete Water absorption |
| Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens)) |
- |
1000 |
|
For Complete Compressive strength |
| Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i)) |
- |
1000 |
|
For Complete Compressive strength |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance ) |
- |
2000 |
|
For dry abrassion -2000 extra (if required, not included in complete testing charges) |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens)) |
- |
2000 |
|
For dry abrassion -2000 extra (if required, not included in complete testing charges) |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance ) |
- |
2000 |
|
For dry abrassion -2000 extra (if required, not included in complete testing charges) |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens)) |
- |
2000 |
|
For dry abrassion -2000 extra (if required, not included in complete testing charges) |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i)) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength ) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3, Annex F(Individual Failure Load per unit Length) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i)) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength ) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3, Annex G(Individual Breaking Load) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.3, Annex G(Average Breaking Load) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.1.1
(General Quality) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.3, Annex F(Average Failure Load per unit Length) |
- |
2500 |
|
For Complete Tensile and Flexural |
| Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens)) |
- |
2500 |
|
For Complete Water absorption |
| Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp)) |
- |
7800 |
|
For complete dimension and qualitative tests |
| Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp)) |
- |
7800 |
|
For complete dimension and qualitative tests |
|
04 Dec, 2028 |
-
Included w.e.f. 28-07-2021. Amendment 1 included w.e.f. 11-10-2022. |
| 7242 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 710 (2010) |
Marine plywood - Specification (Second Revision) |
BWP 1800mmX900mm to 2400X1200mm, Thickness 3 to 25 mm |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(DIMENSIONS) |
- |
2500 |
|
- |
| 9.1.2 , 9.1.2.1(Glue Adhesion in Dry State) |
- |
2500 |
|
- |
| 9.1.2 , 9.1.2.2(Glue Adhesion in Dry State) |
- |
2500 |
|
- |
| 9.1.3 , 9.1.3.1.1(Water resistance test) |
- |
2500 |
|
- |
| 9.1.3 , 9.1.3.1.2(Water resistance test) |
- |
2500 |
|
- |
| 9.1.4(Tensile strength) |
- |
2500 |
|
- |
| 9.1.1(MOISTURE CONTENT) |
- |
2500 |
|
- |
| 9.1.5(Mycological test) |
- |
1000 |
|
- |
| 11.1(MARKING) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 11.2(MARKING) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.2(WORKMANSHIP AND FINISH ) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.1(WORKMANSHIP AND FINISH ) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.3(WORKMANSHIP AND FINISH ) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.5(WORKMANSHIP AND FINISH ) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 9.1.6 (Table 3)(Static bending strength) |
- |
2500 |
|
For Tensile strength and Static Bending strength and Wet Bending Strength |
| 9.1.7 (Table 4)(Wet bending strength) |
- |
2500 |
|
For Tensile strength and Static Bending strength and Wet Bending Strength |
|
04 Dec, 2028 |
-
Included w.e.f. 21-09-2022. |
| 7243 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 1659 (2004) |
Block boards - Specification (Fourth Revision) |
Grade BWP & MR |
6850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.3(Dimensional Requirements - Variation in thickness - Annexure E) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.3(Dimensional Requirements - Squareness - Annexure D) |
- |
2500 |
|
- |
| 7.3(Dimensional Requirements - Edge Straightness - Annexure D) |
- |
2500 |
|
- |
| 7.3(Dimensional Requirements - Thickness - Annexure E) |
- |
2500 |
|
- |
| 7.3(Dimensional Requirements - Width - 8.1.4) |
- |
2500 |
|
For complete dimension and qualitative tests |
| 7.3(Dimensional Requirements - Length - 8.1.4) |
- |
2500 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F) |
- |
2350 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F) |
- |
2350 |
|
- |
| 9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F) |
- |
2350 |
|
For complete dimension and qualitative tests |
| 9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F) |
- |
2350 |
|
For complete dimension and qualitative tests |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F) |
- |
2350 |
|
For complete dimension and qualitative tests |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F) |
- |
2350 |
|
For complete dimension and qualitative tests |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade]) |
- |
1500 |
|
- |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade]) |
- |
1500 |
|
- |
| 9.2.3(Adhesion of Plies - Annexure H) |
- |
1000 |
|
- |
| 9.2.4(Mycological Test [for MR grade only] - Annexure J) |
- |
500 |
|
- |
| 9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K) |
- |
2500 |
|
- |
| 9.2.5(Modulus of elasticity - AVERAGE - Annexure K) |
- |
2500 |
|
- |
| 9.2.6(Spot test - Annexure L) |
- |
500 |
|
- |
| cl. 11(marking) |
- |
500 |
|
Marking and spot testing including. |
| cl. 11.1(marking - BIS certification marking) |
- |
500 |
|
Marking and spot testing including. |
|
04 Dec, 2028 |
-
Included w.e.f. 21-09-2022. |
| 7244 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 2202 : Part 1 (2023) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision |
- |
20500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1(Workmanship & Finish) |
- |
0 |
|
- |
| 9.2(Workmanship & Finish) |
- |
0 |
|
- |
| 9.3(Workmanship & Finish) |
- |
0 |
|
- |
| 11.1(Dimensions - Height) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions - Width) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions - Thickness) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions - Variation in thickness) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions - Squareness) |
- |
2500 |
|
For Cl 11.1 |
| 11.12(End immersion test) |
- |
1000 |
|
For Cl 11.12 |
| 11.13(Knife Test) |
- |
500 |
|
For Cl 11.13 |
| 11.14(Glue Adhesion Test) |
- |
750 |
|
For Cl 11.14 |
| 4(GRADE) |
- |
2500 |
|
For Cl 4 |
| 4(TYPE) |
- |
2500 |
|
For Cl 4 |
| 5(SIZES) |
- |
2500 |
|
For Cl 7 |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
2500 |
|
For Cl 7 |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
2500 |
|
For Cl 7 |
| 7.1.2(CONSTRUCTION-Blockboard Core) |
- |
2500 |
|
For Cl 7 |
| 7.3.2(CONSTRUCTION-Stiles and Rails) |
- |
2500 |
|
For Cl 7 |
| 7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
2500 |
|
For Cl 7 |
| 7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
2500 |
|
For Cl 7 |
| 7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
2500 |
|
For Cl 7 |
| 7.3.3(CONSTRUCTION-Stiles and Rails) |
- |
2500 |
|
For Cl 7 |
| 9.1(WORKMANSHIP AND FINISH) |
- |
250 |
|
For Cl 9.1 |
| 9.2(WORKMANSHIP AND FINISH) |
- |
250 |
|
For Cl 9.2 |
| 9.3(WORKMANSHIP AND FINISH) |
- |
250 |
|
For Cl 9.3 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.2(General Flatness Test) |
- |
1000 |
|
For Cl 11.2 |
| 11.2(General Flatness Test) |
- |
1000 |
|
For Cl 11.2 |
| 11.2(General Flatness Test) |
- |
1000 |
|
For Cl 11.2 |
| 11.3(Local Planeness Test) |
- |
1000 |
|
For Cl 11.3 |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
For Cl 11.4 |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
For Cl 11.4 |
| 11.5(Flexure Test) |
- |
2000 |
|
For Cl 11.5 |
| 11.5(Flexure Test) |
- |
2000 |
|
For Cl 11.5 |
| 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| 11.7.1(Shock Resistance Test) |
- |
2000 |
|
For Cl 11.7 |
| 11.7.2(Shock Resistance Test) |
- |
2000 |
|
For Cl 11.7 |
| 11.8(Buckling Test) |
- |
2000 |
|
For Cl 11.8 |
| 11.8(Buckling Test) |
- |
2000 |
|
For Cl 11.8 |
| 11.8(Buckling Test) |
- |
2000 |
|
For Cl 11.8 |
| 11.9.2(Slamming Test) |
- |
750 |
|
For Cl 11.9.2 |
| 11.9.3(Slamming Test) |
- |
750 |
|
For Cl 11.9.3 |
| 11.10(Misuse Test) |
- |
750 |
|
For Cl 11.10 |
| 11.11(Varying Humidity Test) |
- |
7250 |
|
For Cl 11.11 |
| 11.11(Varying Humidity Test) |
- |
7250 |
|
For Cl 11.11 |
| 11.12(End Immersion Test) |
- |
7250 |
|
For Cl 11.12 |
| 11.13(Knife Test) |
- |
500 |
|
For Cl 11.13 |
| 11.14(Glue Adhesion Test) |
- |
750 |
|
For Cl 11.14 |
| 11.15(Screw Withdrawal Resistance Test) |
- |
750 |
|
For Cl 11.15 |
| 11.15(Screw Withdrawal Resistance Test) |
- |
750 |
|
For Cl 11.15 |
| Clause 4.2(grades specified) |
- |
2500 |
|
For Cl 4 |
| Clause 5(SIZES) |
- |
2500 |
|
For Cl 5 |
| Clause 6.1.1(species of timber) |
- |
2500 |
|
For Cl 6 |
| Clause 6.1.2(list of species) |
- |
2500 |
|
For Cl 6 |
| Clause 6.1.3(moisture content) |
- |
2500 |
|
For Cl 6 |
| Clause 6.2.1(Plywood) |
- |
2500 |
|
For Cl 6 |
| Clause 6.2.2(Decorative plywood) |
- |
2500 |
|
For Cl 6 |
| Clause 6.3(Cross-Bands) |
- |
2500 |
|
For Cl 6 |
| Clause 6.4.1(Commercial Face
Veneers) |
- |
2500 |
|
For Cl 6 |
| Clause 6.4.2(Decorative Face
Veneers) |
- |
2500 |
|
For Cl 6 |
| Clause 6.6.1(Adhesives) |
- |
2500 |
|
For Cl 6 |
| Clause 6.7(Particle Board) |
- |
2500 |
|
For Cl 6 |
| Clause 6.8(Medium density
fibre board) |
- |
2500 |
|
For Cl 6 |
| Clause 6.9(Alternative Materials) |
- |
2500 |
|
For Cl 6 |
| Clause 7.1(Blockboard Core) |
- |
2500 |
|
For Cl 7 |
| Clause 7.2(Particle Board or
Medium Density Fibre) |
- |
2500 |
|
For Cl 7 |
| Clause 7.3(Stiles and Rails) |
- |
2500 |
|
For Cl 7 |
| Clause 7.4(Levelling) |
- |
2500 |
|
For Cl 7 |
| Clause 7.5(Face Panel) |
- |
2500 |
|
For Cl 7 |
| Clause 7.6(Lipping) |
- |
2500 |
|
For Cl 7 |
| Clause 7.7(Rebating) |
- |
2500 |
|
For Cl 7 |
| Clause 7.8(Opening for Glazing) |
- |
2500 |
|
For Cl 7 |
| Clause 7.9(Venetian) |
- |
2500 |
|
For Cl 7 |
| Clause 8.1(Locks) |
- |
2500 |
|
For Cl 8 |
| Clause 9(WORKMANSHIP AND
FINISH) |
- |
250 |
|
For Cl 9 |
| Clause 10.1(Classification of Tests) |
- |
2500 |
|
For Cl 10.1 |
| Clause 11.1(Dimensions and
Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| Clause 11.2(General Flatness Test) |
- |
1000 |
|
For Cl 11.2 |
| Clause 11.3(Local Planeness Test) |
- |
1000 |
|
For Cl 11.3 |
| Clause 11.4(Impact Indentation Test) |
- |
1000 |
|
For Cl 11.4 |
| Clause 11.5(Flexure Test) |
- |
2000 |
|
For Cl 11.5 |
| Clause 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| Clause 11.7(Shock Resistance Test) |
- |
2000 |
|
For Cl 11.7 |
| Clause 11.8(Buckling Resistance Test) |
- |
2000 |
|
For Cl 11.8 |
| Clause 11.9(Slamming Test) |
- |
750 |
|
For Cl 11.9 |
| Clause 11.10(Misuse Test) |
- |
750 |
|
For Cl 11.10 |
| Clause 11.11(Varying Humidity Test) |
- |
7250 |
|
For Cl 11.11 |
| Clause 11.12(End Immersion Test) |
- |
7250 |
|
For Cl 11.12 |
| Clause 11.13(Knife Test) |
- |
500 |
|
For Cl 11.13 |
| Clause 11.14(Glue Adhesion Test) |
- |
750 |
|
For Cl 11.14 |
| Clause 11.15(Screw Withdrawal
Resistance Test) |
- |
2500 |
|
For Cl 11.15 |
| Clause 12(SAMPLING AND CRITERIA
FOR CONFORMITY) |
- |
2500 |
|
For Cl 12 |
| Clause 13(ADDITIONAL REQUIREMENTS
FOR ECO MARK) |
- |
2500 |
|
For Cl 13 |
| Clause 14(Marking) |
- |
2500 |
|
For Cl 14 |
| 4(Grade, Type and Construction) |
- |
2500 |
|
For Cl 4 |
| 5(Sizes and Thickness) |
- |
2500 |
|
For Cl 5 |
| 6.1(Timber) |
- |
2500 |
|
For Cl 6 |
| 6.2(Plywood for flush door shutter) |
- |
2500 |
|
For Cl 6 |
| 6.3(Cross-Bands ) |
- |
2500 |
|
For Cl 6 |
| 6.4.1(Commercial Face Veneers) |
- |
2500 |
|
For Cl 6 |
| 6.4.2(Decorative face veneers) |
- |
2500 |
|
For Cl 6 |
| 6.6(Adhesives) |
- |
2500 |
|
For Cl 6 |
| 6.7(Particle Board) |
- |
2500 |
|
For Cl 6 |
| 6.8(Medium Density Fibre) |
- |
2500 |
|
For Cl 6 |
| 6.9(Alternative Materials) |
- |
2500 |
|
For Cl 6 |
| 7(Construction) |
- |
2500 |
|
For Cl 7 |
| 8.1(Locks) |
- |
2500 |
|
For Cl 8 |
| 8.2(Other Fittings) |
- |
2500 |
|
For Cl 8 |
| 9(Workmanship and Finish) |
- |
250 |
|
For Cl 9 |
| 10(Tests) |
- |
2500 |
|
For Cl 10 |
| 11.1(Dimensions and Squareness Test) |
- |
2500 |
|
For Cl 11.1 |
| 11.2(General Flatness Test) |
- |
2000 |
|
For Cl 11.2 |
| 11.3(Local Planeness Test) |
- |
1000 |
|
For Cl 11.3 |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
For Cl 11.4 |
| 11.5(Flexure Test) |
- |
2000 |
|
For Cl 11.5 |
| 11.6(Edge Loading Test) |
- |
2000 |
|
For Cl 11.6 |
| 11.7(Shock Resistance Test) |
- |
2000 |
|
For Cl 11.7 |
| 11.8(Buckling Resistance Test) |
- |
750 |
|
For Cl 11.8 |
| 11.9(Slamming Test) |
- |
750 |
|
For Cl 11.9 |
| 11.1(Misuse Test) |
- |
750 |
|
For Cl 11.1 |
| 11.11(Varying Humidity Test) |
- |
7250 |
|
For Cl 11.11 |
| 11.12(End Immersion Test) |
- |
7250 |
|
For Cl 11.12 |
| 11.13(Knife Test) |
- |
500 |
|
For Cl 11.13 |
| 11.14(Glue Adhesion Test) |
- |
750 |
|
For Cl 11.4 |
| 11.15(Screw Withdrawal Resistance Test) |
- |
750 |
|
For Cl 11.15 |
| 14(Marking ) |
- |
2500 |
|
For Cl 14 |
|
04 Dec, 2028 |
-
Included w.e.f. 09-04-2024. |
| 7245 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 2202 : Part 2 (2022) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause No - 6.1(Timber) |
- |
250 |
|
For Complete Cl 6.1 |
| Clause No -6.2(Alternative Materials (LVL) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials veneer laminated lumber (VLL)) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials medium density fibre board (MDF)) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials -plywood) |
- |
250 |
|
For Complete Cl 6.2 |
| Clause No -6.2(BWP grade flush door shutter) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.3.1("Face Panels:
Particle Board
MDF/ HDF
Fibre Hardboard") |
- |
2000 |
|
For Complete Cl 6.3.1 |
| Clause No -6.4(Adhesive) |
- |
9750 |
|
For Complete Cl 6.4 |
| Clause No -7.1(Construction) |
- |
1000 |
|
For Complete Cl 7.1 |
| Clause No - 7.3(" MDF board or
HDF board ") |
- |
2000 |
|
For Complete Cl 7.3 |
| Clause No -9.2("Workmanship and
finish") |
- |
250 |
|
For complete cl 9.2 |
| Clause No -10.1(tests for flush door shutters) |
- |
500 |
|
For complete Cl 10.1 |
| Clause No -10.2(End Immersion Test) |
- |
1000 |
|
For Complete Cl 10.2 |
| Clause No -10.3(Glue Adhesion Test) |
- |
750 |
|
For complete Cl 10.3 |
| Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY) |
- |
250 |
|
For Complete Cl 11 |
| Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO
MARK") |
- |
250 |
|
For Complete Cl 12 |
| 5(SIZES AND TOLERANCES) |
- |
5000 |
|
For complete cl 5 |
| 6.5(The swelling in thickness of the particle board, MDF
and HDF board for core) |
- |
5000 |
|
For Complete Cl 6.5 |
| Clause No - 6.1(Timber) |
- |
250 |
|
For Complete Cl 6.1 |
| Clause No -6.2(Alternative Materials (LVL) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials veneer laminated lumber (VLL)) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials medium density fibre board (MDF)) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.2(Alternative Materials -plywood) |
- |
250 |
|
For Complete Cl 6.2 |
| Clause No -6.2(BWP grade flush door shutter) |
- |
2000 |
|
For Complete Cl 6.2 |
| Clause No -6.3.1("Face Panels:
Particle Board
MDF/ HDF
Fibre Hardboard") |
- |
2000 |
|
For Complete Cl 6.3.1 |
| Clause No -6.4(Adhesive) |
- |
9750 |
|
For Complete Cl 6.4 |
| Clause No -7.1(Construction) |
- |
1000 |
|
For Complete Cl 7.1 |
| Clause No - 7.3(" MDF board or
HDF board ") |
- |
2000 |
|
For Complete Cl 7.3 |
| Clause No -9.2("Workmanship and
finish") |
- |
250 |
|
For complete cl 9.2 |
| Clause No -10.1(tests for flush door shutters) |
- |
500 |
|
For complete Cl 10.1 |
| Clause No -10.2(End Immersion Test) |
- |
1000 |
|
For Complete Cl 10.2 |
| Clause No -10.3(Glue Adhesion Test) |
- |
750 |
|
For complete Cl 10.3 |
| Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY) |
- |
250 |
|
For Complete Cl 11 |
| Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO
MARK") |
- |
250 |
|
For Complete Cl 12 |
| 5(SIZES AND TOLERANCES) |
- |
5000 |
|
For complete cl 5 |
| 6.5(The swelling in thickness of the particle board, MDF
and HDF board for core) |
- |
5000 |
|
For Complete Cl 6.5 |
|
04 Dec, 2028 |
-
Included W.E.F. 05-04-2024. |
| 7246 |
Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)
| 8139626
| IS 302 : Part 2 : Sec 7 (2024) |
Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines |
- |
90000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(GENERAL REQUIREMENT) |
- |
3000 |
|
- |
| 6(CLASSIFICATION) |
- |
2000 |
|
- |
| 7(MARKING AND INSTRUCTIONS) |
- |
3000 |
|
- |
| 8(PROTECTION AGAINST ACCESS TO LIVE PARTS) |
- |
4000 |
|
- |
| 10(POWER INPUT AND CURRENT) |
- |
7000 |
|
- |
| 11(HEATING) |
- |
12000 |
|
- |
| 13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
8000 |
|
- |
| 14(TRANSIENT OVERVOLTAGES) |
- |
6000 |
|
- |
| 15(MOISTURE RESISTANCE) |
- |
15000 |
|
- |
| 16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
8000 |
|
- |
| 17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
5000 |
|
- |
| 17("OVERLOAD PROTECTION OF
TRANSFORMERS AND ASSOCIATED CIRCUITS ") |
- |
6000 |
|
- |
| 18(ENDURANCE) |
- |
25000 |
|
- |
| 19(ABNORMAL OPERATION) |
- |
10000 |
|
- |
| 19.11.4.1(Electrostatic discharges) |
- |
10000 |
|
- |
| 19.11.4.3(Fast transient bursts) |
- |
10000 |
|
- |
| 19.11.4.4(Surge immunity test) |
- |
10000 |
|
- |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
10000 |
|
- |
| 20(STABILITY AND MECHANICAL HAZARDS) |
- |
5000 |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
7000 |
|
- |
| 22(CONSTRUCTION) |
- |
8000 |
|
- |
| 23(INTERNAL WIRING) |
- |
6000 |
|
- |
| 24(COMPONENTS) |
- |
5000 |
|
- |
| 25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
6000 |
|
- |
| 26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
6000 |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
6000 |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
5000 |
|
- |
| 29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
7000 |
|
- |
| 30(RESISTANCE TO HEAT AND FIRE) |
- |
7000 |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
5000 |
|
- |
| 19.13(ABNORMAL OPERATION) |
- |
5000 |
|
- |
| 19.101(Abnormal Operation) |
- |
5000 |
|
- |
| 19.102(Abnormal Operation) |
- |
5000 |
|
- |
|
05 Apr, 2027 |
-
Exclusion
Cl 19.11.4.2 to Cl 19.11.4.7
24 (COMPONENTS) |
| 7247 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 18482 (2023) |
Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification |
With/Without liner ,With/Without UV stabilization |
30951 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Sack Type) |
- |
0 |
|
- |
| 5.2.1(Fabric) |
- |
2000 |
|
- |
| 5.2.2(Linear density of tapes) |
- |
0 |
|
- |
| 5.2.4(Unlaminated fabric mass) |
- |
0 |
|
- |
| 5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination) |
- |
500 |
|
- |
| 5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric) |
- |
0 |
|
- |
| 5.3.1.1.3(Total mass of BOPP film laminated woven fabric) |
- |
0 |
|
- |
| 5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination) |
- |
0 |
|
- |
| 5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric) |
- |
0 |
|
- |
| 5.3.1.2.3(The total mass of nonwoven laminated woven fabric) |
- |
0 |
|
- |
| 5.4.1(Sack) |
- |
0 |
|
- |
| 5.4.1.1(Centre seam) |
- |
1100 |
|
- |
| 5.4.1.2(Bottom seam) |
- |
1100 |
|
- |
| 5.4.2(Sack) |
- |
0 |
|
- |
| 5.4.3(Sack) |
- |
0 |
|
- |
| 5.4.5(Liner) |
- |
2000 |
|
- |
| 6.1.1, Table 1(Inside length) |
- |
500 |
|
- |
| 6.1.1, Table 1(Inside width) |
- |
0 |
|
- |
| 6.1.1, Table 1(Gusset width) |
- |
0 |
|
- |
| 6.1.1, Table 1(Warp per dm) |
- |
500 |
|
- |
| 6.1.1, Table 1(Weft per dm) |
- |
0 |
|
- |
| 6.1.1, Table 1(Mass of laminated fabric) |
- |
0 |
|
- |
| 6.2, Table 1(Average breaking strength - Lengthwise) |
- |
1100 |
|
- |
| 6.2, Table 1(Average breaking strength - Widthwise) |
- |
1100 |
|
- |
| 6.2, Table 1(Breaking strength of bottom seam) |
- |
1100 |
|
- |
| 6.2, Table 1(Breaking strength of centre seam) |
- |
1100 |
|
- |
| 6.2, Table 1(Average elongation at break of fabric - Lengthwise) |
- |
0 |
|
- |
| 6.2, Table 1(Average elongation at break of fabric - Widthwise) |
- |
0 |
|
- |
| 6.3(Average breaking strength - Lengthwise after UV exposure) |
- |
1100 |
|
- |
| 6.3(Average breaking strength - Widthwise after UV exposure) |
- |
1100 |
|
UV exposure test charges for 192 hours Rs. 10180 |
| 6.4(Drop Impact Testing of Filled Sacks) |
- |
1100 |
|
- |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
1000 |
|
- |
| Clause 6.2.2(Stitch strength) |
- |
0 |
|
- |
| Clause 6.2.2(Weld seam strength) |
- |
0 |
|
- |
| Clause 5.4.5.3("Free from pin holes (except
for air removal perforations), patches, tears, blisters,
and any other visible defects") |
- |
0 |
|
- |
| Clause 6.2.2(Stitch strength) |
- |
0 |
|
- |
| Clause 6.2.2(Weld seam strength) |
- |
0 |
|
- |
| Clause 6.5 Table 1 viii(Ash content) |
- |
1200 |
|
- |
|
16 May, 2028 |
-
Included w.e.f. 20.08.2024 |
| 7248 |
LILABA ANALYTICAL LABORATORIES LLP, SURAT
| 7137216
| IS 14543 (2024) |
Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision |
200 ml,250 ml,300 ml,500 ml,750 ml,1L,2L,5L,10L,20L |
18338 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.1(Escherichia Coli) |
- |
488 |
|
+18% GST |
| 5.2.2(Coliform) |
- |
488 |
|
+18% GST |
| 5.2.5(Pseudomonas aeruginosa) |
- |
375 |
|
+18% GST |
| 5.2.8(Salmonella & Shigella) |
- |
676 |
|
+18% GST |
| 5.2.3(Faecal Streptococci & Staphylococcus aureus) |
- |
826 |
|
+18% GST |
| 5.2.4(Sulphite Reducing Anaerobes) |
- |
375 |
|
+18% GST |
| 5.2.9(Vibrio Cholera & Vibrio parahaemolyicus) |
- |
676 |
|
+18% GST |
| 5.2.7(Yeast & Mould) |
- |
338 |
|
+18% GST |
| 5.2.6(Aerobic Microbial Count @ 22 o C & 37o C) |
- |
750 |
|
+18% GST |
| 5.3/Table 1/i(Colour) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/ii(Odour) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/iii(Taste) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/iv(Turbidity) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/v(Total Dissolved Solids) |
- |
225 |
|
+18% GST |
| 5.3/Table 1/vi(pH) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/v(Nitrate) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/i(Barium) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/ii(Copper) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/iii(Iron) |
- |
225 |
|
+18% GST |
| 5.3/Table 2/iv(Maganese) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/vi(Nitrite) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/vii(Fluoride) |
- |
113 |
|
+18% GST |
| 5.3/Table 2/viii(Zinc) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/ix(Silver) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/x(Aluminium) |
- |
225 |
|
+18% GST |
| 5.3/Table 2/xi(Chloride) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/xii(Selenium) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xiii(Suphate) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xiv(Alkalinity) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/xv(Calcium) |
- |
38 |
|
+18% GST |
| 5.3/Table 2/xvi(Magnesium) |
- |
38 |
|
+18% GST |
| 5.3/Table 2/xvii(Sodium) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xviii(Residual Free Chlorine) |
- |
413 |
|
+18% GST |
| 5.3/Table 2/xix(Phenolic Compounds) |
- |
300 |
|
+18% GST |
| 5.3/Table 2/xx(Mineral Oil) |
- |
300 |
|
+18% GST |
| 5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xxii(Sulphide) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xxiii(Antinomy) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xxiv(Borates) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xxxv(Bromate) |
- |
1875 |
|
+18% GST |
| 5.3/Table 3/i(Mercury) |
- |
263 |
|
+18% GST |
| 5.3/Table 3/ii(Cadmium) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/iii(Arsenic) |
- |
263 |
|
+18% GST |
| 5.3/Table 3/iv(Cyanide) |
- |
300 |
|
+18% GST |
| 5.3/Table 3/v(Lead) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/vi(Chromium) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/vii(Nickel) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/x(Uranium) |
- |
1500 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDT) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/ii(Lindane) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(b-Endosulfan) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xvi(Dieldrin) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xvi(Aldrin) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDT) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(a-Endosulfan) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(d-HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDD) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDE) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDE) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(a-HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(β- HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(Endosulfan sulfate) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDD) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xii(Alachlor) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/vii(Chlorpyrifos) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/x(Butachlor) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/vi(Ethion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate sulphoxide) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xiv(Methyl parathion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xv(Malathion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/v(Monochrotophos) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xiii(Atrazine) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate sulfone) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxvii(Methyl paraoxon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxviii(Malaoxon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xi(Isoproturon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/ix(2,4 –D) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxxi(Total Pesticide Residue) |
- |
75 |
|
+18% GST |
| 5.3(Appearance) |
- |
38 |
|
+18% GST |
| 5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons) |
- |
750 |
|
+18% GST |
| 5.3/Table 3/viii(Polyclorinated biphenyl (PCB)) |
- |
750 |
|
+18% GST |
| Cl-5.1(General Requirements) |
- |
0 |
|
-- |
| Cl-5.2.1(Escherichia coli or thermotolerant bacteria) |
- |
488 |
|
+18% GST |
| Cl-5.2.2(Coliform) |
- |
488 |
|
+18% GST |
| Cl-5.2.3(Staphylococcus aureus) |
- |
413 |
|
+18% GST |
| Cl-5.2.4(Sulphite Reducing Anaerobes) |
- |
413 |
|
375 |
| Cl-5.2.5(Pseudomonas Aeruginosa) |
- |
375 |
|
+18% GST |
| Cl-5.2.6(Aerobic Microbial Count @ 37 deg C) |
- |
375 |
|
+18% GST |
| Cl-5.2.7(Yeast and mould) |
- |
375 |
|
+18% GST |
| Cl-5.2.8(Salmonella) |
- |
338 |
|
+18% GST |
| Cl-5.2.9(Vibrio cholera) |
- |
338 |
|
+18% GST |
| Cl-5.3, Table-1 (i)(Colour, true colour units, Max) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (ii)(Odour) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (iii)(Taste) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-1 (vi)(pH) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (i)(Barium (as Ba)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (ii)(Copper (as Cu)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (iii)(Iron (as Fe)) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-2 (iv)(Manganese (as Mn)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (v)(Nitrate (as NO3 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (vi)(Nitrite (as NO2 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (vii)(Fluoride (as F)) |
- |
113 |
|
+18% GST |
| Cl-5.3, Table-2 (viii)(Zinc (as Zn)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (ix)(Silver (as Ag)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (x)(Aluminium (as A1)) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-2 (xi)(Chloride (as Cl)) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (xii)(Selenium (as Se)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 )) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (xv)(Calcium (as Ca)) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-2 (xvi)(Magnesium (as Mg)) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-2 (xvii)(Sodium (as Na)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xviii)(Residual free chlorine) |
- |
413 |
|
+18% GST |
| Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH)) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-2 (xx)(Mineral oil) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-2 (xxi)(Anionic surface active agents) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xxii)(Sulphide) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
1875 |
|
+18% GST |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-3 (ii)(Cadmium (as Cd)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (vi)(Chromium (as Cr)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (vii)(Nickel (as Ni)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB)) |
- |
750 |
|
+18% GST |
| Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons) |
- |
750 |
|
+18% GST |
| Cl-5.3, Table-3 (x)(Uranium) |
- |
1500 |
|
+18% GST |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
75 |
|
+18% GST |
| Cl-5.2.3(Faecal streptococci) |
- |
413 |
|
+18% GST |
| Cl-5.2.8(shigella) |
- |
338 |
|
+18% GST |
| Cl-5.2.9(V.parahaemolyticus) |
- |
338 |
|
+18% GST |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
0 |
|
-- |
| 5.2.1(Escherichia Coli) |
- |
488 |
|
+18% GST |
| 5.2.2(Coliform) |
- |
488 |
|
+18% GST |
| 5.2.5(Pseudomonas aeruginosa) |
- |
375 |
|
+18% GST |
| 5.2.8(Salmonella & Shigella) |
- |
676 |
|
+18% GST |
| 5.2.3(Faecal Streptococci & Staphylococcus aureus) |
- |
826 |
|
+18% GST |
| 5.2.4(Sulphite Reducing Anaerobes) |
- |
375 |
|
+18% GST |
| 5.2.9(Vibrio Cholera & Vibrio parahaemolyicus) |
- |
676 |
|
+18% GST |
| 5.2.7(Yeast & Mould) |
- |
338 |
|
+18% GST |
| 5.2.6(Aerobic Microbial Count @ 22 o C & 37o C) |
- |
750 |
|
+18% GST |
| 5.3/Table 1/i(Colour) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/ii(Odour) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/iii(Taste) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/iv(Turbidity) |
- |
38 |
|
+18% GST |
| 5.3/Table 1/v(Total Dissolved Solids) |
- |
225 |
|
+18% GST |
| 5.3/Table 1/vi(pH) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/v(Nitrate) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/i(Barium) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/ii(Copper) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/iii(Iron) |
- |
225 |
|
+18% GST |
| 5.3/Table 2/iv(Maganese) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/vi(Nitrite) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/vii(Fluoride) |
- |
113 |
|
+18% GST |
| 5.3/Table 2/viii(Zinc) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/ix(Silver) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/x(Aluminium) |
- |
225 |
|
+18% GST |
| 5.3/Table 2/xi(Chloride) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/xii(Selenium) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xiii(Suphate) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xiv(Alkalinity) |
- |
75 |
|
+18% GST |
| 5.3/Table 2/xv(Calcium) |
- |
38 |
|
+18% GST |
| 5.3/Table 2/xvi(Magnesium) |
- |
38 |
|
+18% GST |
| 5.3/Table 2/xvii(Sodium) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xviii(Residual Free Chlorine) |
- |
413 |
|
+18% GST |
| 5.3/Table 2/xix(Phenolic Compounds) |
- |
300 |
|
+18% GST |
| 5.3/Table 2/xx(Mineral Oil) |
- |
300 |
|
+18% GST |
| 5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xxii(Sulphide) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xxiii(Antinomy) |
- |
263 |
|
+18% GST |
| 5.3/Table 2/xxiv(Borates) |
- |
150 |
|
+18% GST |
| 5.3/Table 2/xxxv(Bromate) |
- |
1875 |
|
+18% GST |
| 5.3/Table 3/i(Mercury) |
- |
263 |
|
+18% GST |
| 5.3/Table 3/ii(Cadmium) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/iii(Arsenic) |
- |
263 |
|
+18% GST |
| 5.3/Table 3/iv(Cyanide) |
- |
300 |
|
+18% GST |
| 5.3/Table 3/v(Lead) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/vi(Chromium) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/vii(Nickel) |
- |
150 |
|
+18% GST |
| 5.3/Table 3/x(Uranium) |
- |
750 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDT) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/ii(Lindane) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(b-Endosulfan) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xvi(Dieldrin) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xvi(Aldrin) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDT) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(a-Endosulfan) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(d-HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDD) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDE) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(O,P-DDE) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(a-HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iii(β- HCH) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/iv(Endosulfan sulfate) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/i(P,P-DDD) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xii(Alachlor) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/vii(Chlorpyrifos) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/x(Butachlor) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/vi(Ethion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate sulphoxide) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xiv(Methyl parathion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xv(Malathion) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/v(Monochrotophos) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xiii(Atrazine) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/viii(Phorate sulfone) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxvii(Methyl paraoxon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxviii(Malaoxon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xi(Isoproturon) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/ix(2,4 –D) |
- |
75 |
|
+18% GST |
| 5.4/Annex D/xxxi(Total Pesticide Residue) |
- |
75 |
|
+18% GST |
| 5.3(Appearance) |
- |
38 |
|
+18% GST |
| 5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons) |
- |
750 |
|
+18% GST |
| 5.3/Table 3/viii(Polyclorinated biphenyl (PCB)) |
- |
750 |
|
+18% GST |
| Cl-5.1(General Requirements) |
- |
0 |
|
+18% GST |
| Cl-5.2.1(Escherichia coli or thermotolerant bacteria) |
- |
488 |
|
+18% GST |
| Cl-5.2.2(Coliform) |
- |
488 |
|
+18% GST |
| Cl-5.2.3(Staphylococcus aureus) |
- |
413 |
|
+18% GST |
| Cl-5.2.4(Sulphite Reducing Anaerobes) |
- |
375 |
|
+18% GST |
| Cl-5.2.5(Pseudomonas Aeruginosa) |
- |
375 |
|
+18% GST |
| Cl-5.2.6(Aerobic Microbial Count @ 37 deg C) |
- |
375 |
|
+18% GST |
| Cl-5.2.7(Yeast and mould) |
- |
338 |
|
+18% GST |
| Cl-5.2.8(Salmonella) |
- |
338 |
|
+18% GST |
| Cl-5.2.9(Vibrio cholera) |
- |
338 |
|
+18% GST |
| Cl-5.3, Table-1 (i)(Colour, true colour units, Max) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (ii)(Odour) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (iii)(Taste) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-1 (vi)(pH) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (i)(Barium (as Ba)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (ii)(Copper (as Cu)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (iii)(Iron (as Fe)) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-2 (iv)(Manganese (as Mn)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (v)(Nitrate (as NO3 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (vi)(Nitrite (as NO2 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (vii)(Fluoride (as F)) |
- |
113 |
|
+18% GST |
| Cl-5.3, Table-2 (viii)(Zinc (as Zn)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (ix)(Silver (as Ag)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (x)(Aluminium (as A1)) |
- |
225 |
|
+18% GST |
| Cl-5.3, Table-2 (xi)(Chloride (as Cl)) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (xii)(Selenium (as Se)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 )) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 )) |
- |
75 |
|
+18% GST |
| Cl-5.3, Table-2 (xv)(Calcium (as Ca)) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-2 (xvi)(Magnesium (as Mg)) |
- |
38 |
|
+18% GST |
| Cl-5.3, Table-2 (xvii)(Sodium (as Na)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xviii)(Residual free chlorine) |
- |
413 |
|
+18% GST |
| Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH)) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-2 (xx)(Mineral oil) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-2 (xxi)(Anionic surface active agents) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xxii)(Sulphide) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
1875 |
|
+18% GST |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-3 (ii)(Cadmium (as Cd)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
263 |
|
+18% GST |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
300 |
|
+18% GST |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (vi)(Chromium (as Cr)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (vii)(Nickel (as Ni)) |
- |
150 |
|
+18% GST |
| Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB)) |
- |
750 |
|
+18% GST |
| Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons) |
- |
750 |
|
+18% GST |
| Cl-5.3, Table-3 (x)(Uranium) |
- |
1500 |
|
+18% GST |
| Cl-5.2.3(Faecal streptococci) |
- |
413 |
|
+18% GST |
| Cl-5.2.8(shigella) |
- |
338 |
|
+18% GST |
| Cl-5.2.9(V.parahaemolyticus) |
- |
338 |
|
+18% GST |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
75 |
|
+18% GST |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
0 |
|
+18% GST |
| 5.2.1(Escherichia Coli) |
- |
- |
|
- |
| 5.2.2(Coliform) |
- |
- |
|
- |
| 5.2.5(Pseudomonas aeruginosa) |
- |
- |
|
- |
| 5.2.8(Salmonella & Shigella) |
- |
- |
|
- |
| 5.2.3(Faecal Streptococci & Staphylococcus aureus) |
- |
- |
|
- |
| 5.2.4(Sulphite Reducing Anaerobes) |
- |
- |
|
- |
| 5.2.9(Vibrio Cholera & Vibrio parahaemolyicus) |
- |
- |
|
- |
| 5.2.7(Yeast & Mould) |
- |
- |
|
- |
| 5.2.6(Aerobic Microbial Count @ 22 o C & 37o C) |
- |
- |
|
- |
| 5.3/Table 1/i(Colour) |
- |
- |
|
- |
| 5.3/Table 1/ii(Odour) |
- |
- |
|
- |
| 5.3/Table 1/iii(Taste) |
- |
- |
|
- |
| 5.3/Table 1/iv(Turbidity) |
- |
- |
|
- |
| 5.3/Table 1/v(Total Dissolved Solids) |
- |
- |
|
- |
| 5.3/Table 1/vi(pH) |
- |
- |
|
- |
| 5.3/Table 2/v(Nitrate) |
- |
- |
|
- |
| 5.3/Table 2/i(Barium) |
- |
- |
|
- |
| 5.3/Table 2/ii(Copper) |
- |
- |
|
- |
| 5.3/Table 2/iii(Iron) |
- |
- |
|
- |
| 5.3/Table 2/iv(Maganese) |
- |
- |
|
- |
| 5.3/Table 2/vi(Nitrite) |
- |
- |
|
- |
| 5.3/Table 2/vii(Fluoride) |
- |
- |
|
- |
| 5.3/Table 2/viii(Zinc) |
- |
- |
|
- |
| 5.3/Table 2/ix(Silver) |
- |
- |
|
- |
| 5.3/Table 2/x(Aluminium) |
- |
- |
|
- |
| 5.3/Table 2/xi(Chloride) |
- |
- |
|
- |
| 5.3/Table 2/xii(Selenium) |
- |
- |
|
- |
| 5.3/Table 2/xiii(Suphate) |
- |
- |
|
- |
| 5.3/Table 2/xiv(Alkalinity) |
- |
- |
|
- |
| 5.3/Table 2/xv(Calcium) |
- |
- |
|
- |
| 5.3/Table 2/xvi(Magnesium) |
- |
- |
|
- |
| 5.3/Table 2/xvii(Sodium) |
- |
- |
|
- |
| 5.3/Table 2/xviii(Residual Free Chlorine) |
- |
- |
|
- |
| 5.3/Table 2/xix(Phenolic Compounds) |
- |
- |
|
- |
| 5.3/Table 2/xx(Mineral Oil) |
- |
- |
|
- |
| 5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS) |
- |
- |
|
- |
| 5.3/Table 2/xxii(Sulphide) |
- |
- |
|
- |
| 5.3/Table 2/xxiii(Antinomy) |
- |
- |
|
- |
| 5.3/Table 2/xxiv(Borates) |
- |
- |
|
- |
| 5.3/Table 2/xxxv(Bromate) |
- |
- |
|
- |
| 5.3/Table 3/i(Mercury) |
- |
- |
|
- |
| 5.3/Table 3/ii(Cadmium) |
- |
- |
|
- |
| 5.3/Table 3/iii(Arsenic) |
- |
- |
|
- |
| 5.3/Table 3/iv(Cyanide) |
- |
- |
|
- |
| 5.3/Table 3/v(Lead) |
- |
- |
|
- |
| 5.3/Table 3/vi(Chromium) |
- |
- |
|
- |
| 5.3/Table 3/vii(Nickel) |
- |
- |
|
- |
| 5.3/Table 3/x(Uranium) |
- |
- |
|
- |
| 5.4/Annex D/i(P,P-DDT) |
- |
- |
|
- |
| 5.4/Annex D/ii(Lindane) |
- |
- |
|
- |
| 5.4/Annex D/iv(b-Endosulfan) |
- |
- |
|
- |
| 5.4/Annex D/xvi(Dieldrin) |
- |
- |
|
- |
| 5.4/Annex D/xvi(Aldrin) |
- |
- |
|
- |
| 5.4/Annex D/i(O,P-DDT) |
- |
- |
|
- |
| 5.4/Annex D/iv(a-Endosulfan) |
- |
- |
|
- |
| 5.4/Annex D/iii(d-HCH) |
- |
- |
|
- |
| 5.4/Annex D/i(O,P-DDD) |
- |
- |
|
- |
| 5.4/Annex D/i(P,P-DDE) |
- |
- |
|
- |
| 5.4/Annex D/i(O,P-DDE) |
- |
- |
|
- |
| 5.4/Annex D/iii(a-HCH) |
- |
- |
|
- |
| 5.4/Annex D/iii(β- HCH) |
- |
- |
|
- |
| 5.4/Annex D/iv(Endosulfan sulfate) |
- |
- |
|
- |
| 5.4/Annex D/i(P,P-DDD) |
- |
- |
|
- |
| 5.4/Annex D/xii(Alachlor) |
- |
- |
|
- |
| 5.4/Annex D/vii(Chlorpyrifos) |
- |
- |
|
- |
| 5.4/Annex D/x(Butachlor) |
- |
- |
|
- |
| 5.4/Annex D/vi(Ethion) |
- |
- |
|
- |
| 5.4/Annex D/viii(Phorate sulphoxide) |
- |
- |
|
- |
| 5.4/Annex D/xiv(Methyl parathion) |
- |
- |
|
- |
| 5.4/Annex D/xv(Malathion) |
- |
- |
|
- |
| 5.4/Annex D/viii(Phorate) |
- |
- |
|
- |
| 5.4/Annex D/v(Monochrotophos) |
- |
- |
|
- |
| 5.4/Annex D/xiii(Atrazine) |
- |
- |
|
- |
| 5.4/Annex D/viii(Phorate sulfone) |
- |
- |
|
- |
| 5.4/Annex D/xxvii(Methyl paraoxon) |
- |
- |
|
- |
| 5.4/Annex D/xxviii(Malaoxon) |
- |
- |
|
- |
| 5.4/Annex D/xi(Isoproturon) |
- |
- |
|
- |
| 5.4/Annex D/ix(2,4 –D) |
- |
- |
|
- |
| 5.4/Annex D/xxxi(Total Pesticide Residue) |
- |
- |
|
- |
| 5.3(Appearance) |
- |
- |
|
- |
| 5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons) |
- |
- |
|
- |
| 5.3/Table 3/viii(Polyclorinated biphenyl (PCB)) |
- |
- |
|
- |
| Cl-5.1(General Requirements) |
- |
- |
|
- |
| Cl-5.2.1(Escherichia coli or thermotolerant bacteria) |
- |
- |
|
- |
| Cl-5.2.2(Coliform) |
- |
- |
|
- |
| Cl-5.2.3(Staphylococcus aureus) |
- |
- |
|
- |
| Cl-5.2.4(Sulphite Reducing Anaerobes) |
- |
- |
|
- |
| Cl-5.2.5(Pseudomonas Aeruginosa) |
- |
- |
|
- |
| Cl-5.2.6(Aerobic Microbial Count @ 37 deg C) |
- |
- |
|
- |
| Cl-5.2.7(Yeast and mould) |
- |
- |
|
- |
| Cl-5.2.8(Salmonella) |
- |
- |
|
- |
| Cl-5.2.9(Vibrio cholera) |
- |
- |
|
- |
| Cl-5.3, Table-1 (i)(Colour, true colour units, Max) |
- |
- |
|
- |
| Cl-5.3, Table-1 (ii)(Odour) |
- |
- |
|
- |
| Cl-5.3, Table-1 (iii)(Taste) |
- |
- |
|
- |
| Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max) |
- |
- |
|
- |
| Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max) |
- |
- |
|
- |
| Cl-5.3, Table-1 (vi)(pH) |
- |
- |
|
- |
| Cl-5.3, Table-2 (i)(Barium (as Ba)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (ii)(Copper (as Cu)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (iii)(Iron (as Fe)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (iv)(Manganese (as Mn)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (v)(Nitrate (as NO3 )) |
- |
- |
|
- |
| Cl-5.3, Table-2 (vi)(Nitrite (as NO2 )) |
- |
- |
|
- |
| Cl-5.3, Table-2 (vii)(Fluoride (as F)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (viii)(Zinc (as Zn)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (ix)(Silver (as Ag)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (x)(Aluminium (as A1)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xi)(Chloride (as Cl)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xii)(Selenium (as Se)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 )) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 )) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xv)(Calcium (as Ca)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xvi)(Magnesium (as Mg)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xvii)(Sodium (as Na)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xviii)(Residual free chlorine) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xx)(Mineral oil) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxi)(Anionic surface active agents) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxii)(Sulphide) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
- |
|
- |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
- |
|
- |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (ii)(Cadmium (as Cd)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (vi)(Chromium (as Cr)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (vii)(Nickel (as Ni)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB)) |
- |
- |
|
- |
| Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons) |
- |
- |
|
- |
| Cl-5.3, Table-3 (x)(Uranium) |
- |
- |
|
- |
| Cl-5.3, Table-3 (x)(Uranium) |
- |
- |
|
- |
| Cl-5.2.3(Faecal streptococci) |
- |
- |
|
- |
| Cl-5.2.8(shigella) |
- |
- |
|
- |
| Cl-5.2.8(shigella) |
- |
- |
|
- |
| Cl-5.2.9(V.parahaemolyticus) |
- |
- |
|
- |
| Cl-5.2.9(V.parahaemolyticus) |
- |
- |
|
- |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
- |
|
- |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
- |
|
- |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
- |
|
- |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
- |
|
- |
|
11 Jun, 2029 |
-
Included w.e.f. 03.10.2024
Except: 5.3 Table-4 i (Alpha emitters), 5.3 Table-4 ii (Beta emitters) |
| 7249 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur
| 7173804
| IS 17399 (2020) |
Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification |
35kg (Type I, II & III) |
29780 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(MANUFACTURE - Raw Materials) |
- |
2000.0 |
|
GST charges Extra |
| 5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes) |
- |
2000.0 |
|
GST charges Extra |
| 5.2- Table 1- i)("REQUIREMENTS - Inside dimensions
a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm") |
- |
1500.0 |
|
(Bottom panel - 500.0, Open Top - 500.0 & Height - 500.0)
(GST charges Extra) |
| 5.2- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
500.0 |
|
GST charges Extra |
| 5.2- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
500.0 |
|
GST charges Extra |
| 5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
500.0 |
|
GST charges Extra |
| 5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise) |
- |
3200.0 |
|
1100.0x2=2200.0 (Lengthwise & Widthwise) + 1000.0 - Specimen Preparation Charges)
GST charges Extra |
| 5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf)) |
- |
1100.0 |
|
GST charges Extra |
| 5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent:
a) Lengthwise b) Widthwise") |
- |
0.00 |
|
- |
| 5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
1200.0 |
|
GST charges Extra |
| 5.3(Lamination) |
- |
2000.0 |
|
GST charges Extra |
| 5.4(Sack Fabrication) |
- |
500.0 |
|
GST charges Extra |
| 5.5(Capacity) |
- |
500.0 |
|
GST charges Extra |
| 6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm) |
- |
0.00 |
|
- |
| 6.1- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
0.00 |
|
- |
| 6.1- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
0.00 |
|
- |
| 6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
0.00 |
|
- |
| 6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf)) |
- |
0.00 |
|
- |
| 6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min) |
- |
0.00 |
|
- |
| 6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise) |
- |
0.00 |
|
- |
| 6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
0.00 |
|
- |
| 6.4(UV Resistance Test) |
- |
13380.0 |
|
UV Resistance- 10180.0 + breaking strength-3200.0 (Lengthwise-1100.0 & Widthwise-1100.0 +1000.0-Sample Preparation Charges)
(GST charges Extra) |
| 7(PRINTING, PACKAGING AND MARKING) |
- |
500.0 |
|
GST charges Extra |
| 8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING) |
- |
400.0 |
|
GST charges Extra |
| Clause 5.1(Raw Materials) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0.00 |
|
- |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0.00 |
|
- |
| Clause 5.4(Sack Fabrication) |
- |
0.00 |
|
- |
| Clause 5.1(Raw Materials) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0.00 |
|
- |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0.00 |
|
- |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0.00 |
|
- |
| Clause 7.3(Marking on Sacks) |
- |
0.00 |
|
- |
| Clause 7.3(Marking on Sacks) |
- |
0.00 |
|
- |
|
10 Sep, 2026 |
-
Included w.e.f. 20.08.2024 |
| 7250 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 17399 (2020) |
Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification |
SACK Type, With UV, Without UV |
34505 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(MANUFACTURE - Raw Materials) |
- |
1050 |
|
- |
| 5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes) |
- |
1000 |
|
- |
| 5.2- Table 1- i)("REQUIREMENTS - Inside dimensions
a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm") |
- |
1500 |
|
- |
| 5.2- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
500 |
|
- |
| 5.2- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
500 |
|
- |
| 5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
500 |
|
- |
| 5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise) |
- |
2200 |
|
- |
| 5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf)) |
- |
1100 |
|
- |
| 5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent:
a) Lengthwise b) Widthwise") |
- |
0 |
|
- |
| 5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
1200 |
|
- |
| 5.3(Lamination) |
- |
1000 |
|
- |
| 5.4(Sack Fabrication) |
- |
1050 |
|
- |
| 5.5(Capacity) |
- |
500 |
|
- |
| 6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm) |
- |
500 |
|
- |
| 6.1- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
500 |
|
- |
| 6.1- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
500 |
|
- |
| 6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
500 |
|
- |
| 6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf)) |
- |
2200 |
|
- |
| 6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min) |
- |
1100 |
|
- |
| 6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise) |
- |
1100 |
|
- |
| 6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
1200 |
|
- |
| 6.4(UV Resistance Test) |
- |
10180 |
|
- |
| 8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING) |
- |
0 |
|
- |
| Clause 5.1(Raw Materials) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0 |
|
- |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0 |
|
- |
| Clause 5.4(Sack Fabrication) |
- |
0 |
|
- |
| Clause 5.1(Raw Materials) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0 |
|
- |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0 |
|
- |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0 |
|
- |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0 |
|
- |
| Clause 7.3(Marking on Sacks) |
- |
0 |
|
- |
| Clause 7.3(Marking on Sacks) |
- |
0 |
|
- |
|
16 May, 2028 |
-
Included w.e.f. 20.08.2024 |
| 7251 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun
| 9178004
| IS 17399 (2020) |
Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification |
- |
42280.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(MANUFACTURE - Raw Materials) |
- |
1050.00 |
|
- |
| 5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes) |
- |
7350.00 |
|
Fabric
Fabric Construction 500
Tape Width 500
Identification (Chemical Analysis) 1050
Melt flow rate (MFR) 1100
Linear Density 700
Tanacity 1100
Elongation of the Tape
Thickness of the Tape 500 |
| 5.2- Table 1- i)("REQUIREMENTS - Inside dimensions
a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm") |
- |
500.00 |
|
- |
| 5.2- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
500.00 |
|
- |
| 5.2- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
500.00 |
|
- |
| 5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
500.00 |
|
- |
| 5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise) |
- |
2700.00 |
|
Avg. breaking strength of Fabric (min)
a. Length wise 1100 500
b. Width wise 1100 |
| 5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf)) |
- |
1100.00 |
|
- |
| 5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent:
a) Lengthwise b) Widthwise") |
- |
0.00 |
|
ALREADY CHARGE TAKEN. |
| 5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
1200.00 |
|
- |
| 5.3(Lamination) |
- |
2050.00 |
|
Mass of lamination film 500
Total Mass of Laminated woven fabric 500
Material Identification of lamination 1050 |
| 5.4(Sack Fabrication) |
- |
1500.00 |
|
Sacks Construction 500
Gromet construction & dimensions 1000 |
| 5.5(Capacity) |
- |
500.00 |
|
- |
| 6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm) |
- |
1500.00 |
|
Inside dimensions
a) Bottom panel (L × W), mm 500
b) Open top (L × W), mm 500
c) Height (H), mm 500 |
| 6.1- Table 1- ii)(REQUIREMENTS - Ends per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- iii)(REQUIREMENTS - Picks per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf)) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| 6.4(UV Resistance Test) |
- |
10180.00 |
|
- |
| 7(PRINTING, PACKAGING AND MARKING) |
- |
0.00 |
|
- |
| 8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING) |
- |
0.00 |
|
- |
| Clause 5.1(Raw Materials) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 5.4(Sack Fabrication) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 7.3(Marking on Sacks) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 5.1(Raw Materials) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(i)"(Inside dimensions) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(ii)"(Ends per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(iii)"(Picks per dm) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(iv)"("Mass of laminated
sack, g") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(v)"("Breaking strength of
laminated fabric") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(vii)"("Elongation at break
of fabric, percent:") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| "Clause 5.2 Table 1(viii)"("Ash content, Max,
percent") |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 5.3(Lamination with a thin film of polypropylene) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
| Clause 7.3(Marking on Sacks) |
- |
0.00 |
|
ALREADY CHARGE TAKEN |
|
24 Apr, 2027 |
-
Included w.e.f. 20.08.2024 |
| 7252 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur
| 7173804
| IS 16703 (2017) |
Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification |
25kg |
26180.0 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Mass of Bale) |
- |
500.0 |
|
GST Charges Extra |
| 5.2 Table 1(Dimensions) |
- |
500.0 |
|
GST Charges Extra |
| 5.2 Table 1(Dimensions) |
- |
0.00 |
|
- |
| 5.2 Table 1(Dimensions) |
- |
0.00 |
|
- |
| 5.2 Table 1(Dimensions) |
- |
0.00 |
|
- |
| 5.2 Table 1(Ends per dm) |
- |
500.0 |
|
GST Charges Extra |
| 5.2 Table 1(Picks per dm) |
- |
500.0 |
|
GST Charges Extra |
| 5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964) |
- |
500.0 |
|
GST Charges Extra |
| 5.2 Table 1(Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1)) |
- |
1600.0 |
|
Breaking Strength (Lengthwise)-1100.0 + 500.0 (Sample preparation charges)
(GST Charges Extra) |
| 5.2 Table 1(Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1)) |
- |
1600.0 |
|
Breaking Strength (Widthwise)-1100.0 + 500.0 (Sample preparation charges)
(GST Charges Extra) |
| 5.2 Table 1(Breaking strength of bottom seam (Ravelled strip
method), Min, N) (kgf) - IS 9030) |
- |
1600.0 |
|
Breaking Strength of Bottom Seam-1100.0+500.0 (Sample preparation charges)
(GST Charges Extra) |
| 5.2 Table 1(Elongation at break of fabric (Ravelled strip method),
percent : IS 1969 (Part 1)) |
- |
0.00 |
|
Elongation at break (Lengthwise) |
| 5.2 Table 1(Elongation at break of fabric (Ravelled strip method),
percent : IS 1969 (Part 1)) |
- |
0.00 |
|
Elongation at break (Widthwise) |
| 5.2 Table 1(Drop impact strength) |
- |
1600.0 |
|
Test Charges 1100.0 + 500.0 (Sample Preparation Charges)
(GST Charges Extra) |
| (Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks) |
- |
1200.0 |
|
GST Charges Extra |
| (Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks) |
- |
0.00 |
|
- |
| 4.6(Capacity) |
- |
500.0 |
|
GST Charges Extra |
| 4.3.1(Bottom Seam) |
- |
500.0 |
|
GST Charges Extra |
| 4.3(Sacks) |
- |
500.0 |
|
GST Charges Extra |
| 4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft)) |
- |
3200.0 |
|
Test Charges 1100.0x2=2200.00(Lengthwise & Widthwise) + 1000.0 (Sample Preparation Charges-Lengthwise & Widthwise)
(GST Charges Extra) |
| 4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40)) |
- |
0.00 |
|
- |
| 4.2(Linear Density) |
- |
700.0 |
|
GST Charges Extra |
| 4.2(Width of tape) |
- |
500.0 |
|
GST Charges Extra |
| 4.6(Capacity) |
- |
0.00 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0.00 |
|
- |
| 4.3(Sacks) |
- |
0.00 |
|
- |
| 4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft)) |
- |
0.00 |
|
- |
| 4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40)) |
- |
10180.0 |
|
GST Charges Extra |
| 4.2(Linear Density) |
- |
0.00 |
|
- |
| 4.2(Width of tape) |
- |
0.00 |
|
- |
|
10 Sep, 2026 |
-
Included w.e.f. 20.08.2024 |
| 7253 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 1659 (2004) |
Block boards - Specification (Fourth Revision) |
GRADE:BWP/MR,TYPE:DEC/COM,THICKNESS:30 mm Max. |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.2.6(Spot test - Annexure L) |
- |
1900 |
|
OK |
| 9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K) |
- |
500 |
|
OK |
| 9.2.5(Modulus of elasticity - AVERAGE - Annexure K) |
- |
500 |
|
OK |
| 9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K) |
- |
500 |
|
OK |
| 9.2.5(Modulus of rupture - AVERAGE - Annexure K) |
- |
500 |
|
OK |
| 9.2.4(Mycological Test [for MR grade only] - Annexure J) |
- |
1900 |
|
OK |
| 9.2.3(Adhesion of Plies - Annexure H) |
- |
500 |
|
OK |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade]) |
- |
500 |
|
OK |
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade]) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F) |
- |
500 |
|
OK |
| 9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F) |
- |
500 |
|
OK |
| 7.3(Dimensional Requirements - Variation in thickness - Annexure E) |
- |
200 |
|
OK |
| 7.3(Dimensional Requirements - Squareness - Annexure D) |
- |
490 |
|
OK |
| 7.3(Dimensional Requirements - Edge Straightness - Annexure D) |
- |
200 |
|
OK |
| 7.3(Dimensional Requirements - Thickness - Annexure E) |
- |
200 |
|
OK |
| 7.3(Dimensional Requirements - Width - 8.1.4) |
- |
200 |
|
OK |
| 7.3(Dimensional Requirements - Length - 8.1.4) |
- |
200 |
|
OK |
| 8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type]) |
- |
200 |
|
OK |
| 8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type]) |
- |
200 |
|
OK |
| 9.2.6 (mechanical)(Spot test - Annexure L) |
- |
1900 |
|
OK |
| cl. 11(marking) |
- |
200 |
|
OK |
| cl. 11.1(marking - BIS certification marking) |
- |
100 |
|
OK |
| Cl-10(ADDITIONAL REQUIREMENTS FOR
ECO-MARK) |
- |
0 |
|
OK |
| 6.2(Core- Moisture & Width) |
- |
0 |
|
OK |
| 6.3(Cross Bands and Faces- Moisture content) |
- |
0 |
|
OK |
| 6.3.1(Thickness of cross band and face veneers) |
- |
0 |
|
OK |
|
17 Mar, 2028 |
-
- |
| 7254 |
Atmy Analytical Labs Pvt. Ltd., Faridabad
| 8167506
| IS 17954 (2023) |
TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION |
ALL |
24900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.2, Table- 2 (i)(Internal channel) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (ii)(Outer channel) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (iii)(Track up to 550 mm) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (v)(Ball cage) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (vi)(Ball spacer) |
- |
24900 |
|
- |
| Cl-5(Components and Manufacture) |
- |
24900 |
|
- |
| Cl-5(Components and Manufacture) |
- |
24900 |
|
- |
| Cl-6.1(Preparatory Measures) |
- |
24900 |
|
- |
| Cl-6.2 (a)(Limiting Deviations- Force) |
- |
24900 |
|
- |
| Cl-6.2 (b)(Limiting Deviations- Speed) |
- |
24900 |
|
- |
| Cl-6.2 (c)(Limiting Deviations- Weights) |
- |
24900 |
|
- |
| Cl-6.2 (d)(Limiting Deviations- Dimension) |
- |
24900 |
|
- |
| Cl-6.3(Application of Forces) |
- |
24900 |
|
- |
| Cl-6.4(Testing Equipment) |
- |
24900 |
|
- |
| Cl-6.5(Sequence of testing) |
- |
24900 |
|
- |
| Cl-7(Vertical Load Test) |
- |
24900 |
|
- |
| Cl-8(Horizontal Load Test) |
- |
24900 |
|
- |
| Cl-9(Durability Test) |
- |
24900 |
|
- |
| Cl-10(Deflection Test) |
- |
24900 |
|
- |
| Cl-11(Slam Test) |
- |
24900 |
|
- |
| Cl-12(Finish) |
- |
24900 |
|
- |
| Cl-5.11(Ball) |
- |
24900 |
|
- |
| Cl-5.10(Rivets) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (i)(Internal channel) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (ii)(Outer channel) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (iii)(Track up to 550 mm) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (v)(Ball cage) |
- |
24900 |
|
- |
| Cl-4.2, Table- 2 (vi)(Ball spacer) |
- |
24900 |
|
- |
| Cl-5(Components and Manufacture) |
- |
24900 |
|
- |
| Cl-5(Components and Manufacture) |
- |
24900 |
|
- |
| Cl-6.1(Preparatory Measures) |
- |
24900 |
|
- |
| Cl-6.2 (a)(Limiting Deviations- Force) |
- |
24900 |
|
- |
| Cl-6.2 (b)(Limiting Deviations- Speed) |
- |
24900 |
|
- |
| Cl-6.2 (c)(Limiting Deviations- Weights) |
- |
24900 |
|
- |
| Cl-6.2 (d)(Limiting Deviations- Dimension) |
- |
24900 |
|
- |
| Cl-6.3(Application of Forces) |
- |
24900 |
|
- |
| Cl-6.4(Testing Equipment) |
- |
24900 |
|
- |
| Cl-6.5(Sequence of testing) |
- |
24900 |
|
- |
| Cl-7(Vertical Load Test) |
- |
24900 |
|
- |
| Cl-8(Horizontal Load Test) |
- |
24900 |
|
- |
| Cl-9(Durability Test) |
- |
24900 |
|
- |
| Cl-10(Deflection Test) |
- |
24900 |
|
- |
| Cl-11(Slam Test) |
- |
24900 |
|
- |
| Cl-12(Finish) |
- |
24900 |
|
- |
| Cl-5.11(Ball) |
- |
24900 |
|
- |
| Cl-5.10(Rivets) |
- |
24900 |
|
- |
|
25 Feb, 2027 |
-
- |
| 7255 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 848 (2006) |
Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision) |
TYPE:MR,BR,BWR, DESCRIPTION:LIQUID/POWDER/FILM |
6967 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 Table (i)(BWP (BOiling WaterProof)) |
- |
4200 |
|
OK |
| 4 Table (i)(BWR (Boiling Water Resistant)) |
- |
4200 |
|
OK |
| 4 Table (i)(MR (Moisture Ressistant)) |
- |
4200 |
|
OK |
| 5,7.4(Keeping Quality (Resistance to heat Polymerization)) |
- |
0 |
|
0 |
| 7.4(Acidity and Alkalinity ( pH)) |
- |
500 |
|
OK |
|
17 Mar, 2028 |
-
- |
| 7256 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 16709 (2017) |
Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification |
- |
18713 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1(Sack Length) |
- |
500 |
|
- |
| 4.1.2(Sack Width) |
- |
500 |
|
- |
| 4.1.3(Top Closure Width and Bottom Closure Width) |
- |
500 |
|
- |
| 4.1.4(Patch Length) |
- |
0 |
|
- |
| 4.1.5(Patch Height) |
- |
0 |
|
- |
| 4.1.6(Length of Valve) |
- |
0 |
|
- |
| 4.1.7(Width of Valve Sleeve) |
- |
0 |
|
- |
| 4.1.8(Length of Valve Sleeve) |
- |
0 |
|
- |
| 5.1(Raw Material) |
- |
2000 |
|
- |
| 5.2(Fabric) |
- |
1000 |
|
- |
| 5.2(Tape density and width) |
- |
1200 |
|
- |
| 5.4(Lamination for PP) |
- |
500 |
|
- |
| 5.4(Lamination for LDPE) |
- |
500 |
|
- |
| 6.1(Mass of Bale) |
- |
500 |
|
- |
| 6.2.1(Breaking Strength and Elongation at Break of Fabric) |
- |
2200 |
|
- |
| 6.2.2(Weld Strength of Top and Bottom Closures) |
- |
1100 |
|
- |
| 6.3(Drop Impact Testing of Filled Sacks) |
- |
1100 |
|
- |
| 6.4(Ash Content) |
- |
1200 |
|
- |
| 8(Atomspheric Conditions for Conditioning and Testing) |
- |
0 |
|
- |
| Cl-5.6(Capacity) |
- |
500 |
|
- |
| Cl- 6.6, Table.-1 (ii)(Ends per dm) |
- |
500 |
|
- |
| Cl-6.6, Table-1 (iii)(Picks per dm) |
- |
500 |
|
- |
| Cl.6.6, Table-1 (vii)(Elongation at break of fabric) |
- |
0 |
|
- |
|
16 May, 2028 |
-
Included w.e.f. 27.08.2024
Exclusion: Cl.6.5 (Air Permeability) |
| 7257 |
CIPET, Hajipur
| 5118334
| IS 11652 (2017) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision) |
- |
26300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
500 |
|
25% Discount for BIS |
| Fig. 1- Table 1- Sr. no. ii
(Ends per dm - Annex B 40 ± 2 ) |
- |
500 |
|
25% Discount for BIS |
| Fig. 1- Table 1-Sr. no. iii
(Picks per dm-Annex B 40 ± 2 ) |
- |
500 |
|
25% Discount for BIS |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note )- Annex B
c) Width of gusset (e) 76 ± 10 mm
) |
- |
0 |
|
Already Included. |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
d) Width of valve (v) 100, + 10/-5 mm
) |
- |
0 |
|
Already Included. |
| Fig. 1- Table 1-Sr. no. i
(Dimensions, mm (see Note )- Annex B
b) Width of sack (w) 480 ± 10 mm
) |
- |
0 |
|
Already Included. |
| Fig. 1, Table 1
(i) Dimensions, mm (see Note ) -Annex B
a) Length of sack, inside (l), 710 ± 10 mm
) |
- |
0 |
|
Already Included. |
| 4.5(and the remaining overhang shall not be more than 5 mm after trimming.) |
- |
500 |
|
Visual. 25% Discount for BIS. |
| 4.1(Raw Material
) |
- |
1050 |
|
25% Discount for BIS. |
| 4.2
(Fabric) |
- |
500 |
|
Fabric Construction. 25% Discount for BIS. |
| 4.2
(Linear Density, 900 denier) |
- |
700 |
|
25% Discount for BIS. |
| 4.2
(The woven fabric shall be
of mesh, 10 × 10 per inch) |
- |
500 |
|
25% Discount for BIS. |
| 4.2
(The woven fabric shall be
of weight, 79 g/m2 ) |
- |
0 |
|
Already Included |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances: a) ± 10 percent on individual value, and
) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances:
b) ± 5 percent on average.
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
500 |
|
Sack Construction. 25% Discount for BIS. |
| 4.4(Seam
) |
- |
500 |
|
25% Discount for BIS. |
| 4.4(Seam
) |
- |
0 |
|
- |
| 4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and ) |
- |
500 |
|
25% Discount for BIS. |
| 4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. ) |
- |
0 |
|
- |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
0 |
|
- |
| 4.4(to a depth of minimum 25 mm, so that so that) |
- |
0 |
|
- |
| 4.4(that the stitches pass through a minimum of six layers of the fabric.) |
- |
0 |
|
- |
| 4.4(The number of stitches/dm shall be 14 ± 2.) |
- |
1050 |
|
Stitching Thread Material Identification. 25% Discount for BIS. |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used
in the fabric.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
0 |
|
- |
| 4.7(Valve for Filling of Sacks) |
- |
0 |
|
- |
| 4.7(There shall be a double fold at the top seam and) |
- |
0 |
|
- |
| 4.7(and then stitching shall be done through six layers.) |
- |
0 |
|
- |
| 4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and) |
- |
500 |
|
25% Discount for BIS. |
| 4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) Non-gusseted type 70 + 6%) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
0 |
|
- |
| 5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
1100 |
|
Lengthwise. 25% Discount for BIS. |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
1100 |
|
Width wise. 25% Discount for BIS. |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
Avg. Breaking Strength & Elongation at Break -Top Seam.
25% Discount for BIS. |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
Avg. Breaking Strength & Elongation at Break -Bottom Seam.
25% Discount for BIS. |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure) |
- |
1100 |
|
25% Discount for BIS. |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
1200 |
|
25% Discount for BIS. |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
0 |
|
25% Discount for BIS. |
| 5/5.6 (UV Resistance, ) |
- |
12380 |
|
(Rs 10180 (Specimen Charge - 192 Hr UV Exposure) + 1100 (Lengthwise Breaking Strength) + 1100 (Width-wise Breaking Strength)
Optional
25% Discount for BIS. |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
0 |
|
- |
| 4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
1100 |
|
Tenacity .
25% Discount for BIS. |
| Fig. 1- Table 1- Sr. no. ii
(Ends per dm - Annex B 40 ± 2 ) |
- |
0 |
|
- |
| Fig. 1- Table 1-Sr. no. iii
(Picks per dm-Annex B 40 ± 2 ) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note )- Annex B
c) Width of gusset (e) 76 ± 10 mm
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
d) Width of valve (v) 100, + 10/-5 mm
) |
- |
0 |
|
- |
| Fig. 1- Table 1-Sr. no. i
(Dimensions, mm (see Note )- Annex B
b) Width of sack (w) 480 ± 10 mm
) |
- |
0 |
|
- |
| Fig. 1, Table 1
(i) Dimensions, mm (see Note ) -Annex B
a) Length of sack, inside (l), 710 ± 10 mm
) |
- |
0 |
|
- |
| 4.5(and the remaining overhang shall not be more than 5 mm after trimming.) |
- |
0 |
|
- |
| 4.1(Raw Material
) |
- |
1200 |
|
Ash Content .
25% Discount for BIS. |
| 4.2
(Fabric) |
- |
0 |
|
- |
| 4.2
(Linear Density, 900 denier) |
- |
700 |
|
Density
25% Discount for BIS. |
| 4.2
(The woven fabric shall be
of mesh, 10 × 10 per inch) |
- |
1050 |
|
Material Identification
25% Discount for BIS. |
| 4.2
(The woven fabric shall be
of weight, 79 g/m2 ) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances: a) ± 10 percent on individual value, and
) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances:
b) ± 5 percent on average.
) |
- |
1100 |
|
MFR (Melt Flow Rate)
25% Discount for BIS. |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
700 |
|
Dimensional Stability
25% Discount for BIS. |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
700 |
|
Dimensional Stability
25% Discount for BIS. |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.4(Seam
) |
- |
500 |
|
Stitching Construction
25% Discount for BIS. |
| 4.4(Seam
) |
- |
2000 |
|
Presence of UV stabilizer - Stitching Thread
25% Discount for BIS. |
| 4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and ) |
- |
0 |
|
- |
| 4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. ) |
- |
0 |
|
- |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
0 |
|
- |
| 4.4(to a depth of minimum 25 mm, so that so that) |
- |
0 |
|
- |
| 4.4(that the stitches pass through a minimum of six layers of the fabric.) |
- |
0 |
|
- |
| 4.4(The number of stitches/dm shall be 14 ± 2.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
700 |
|
Linear Density of stitching Thread.
25% Discount for BIS. |
| 4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used
in the fabric.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
500 |
|
Capacity |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
1050 |
|
Material Identification.
25% Discount for BIS. |
| 4.5(Lamination ) |
- |
500 |
|
Picks per dm.
25% Discount for BIS. |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
0 |
|
- |
| 4.7(Valve for Filling of Sacks) |
- |
0 |
|
- |
| 4.7(There shall be a double fold at the top seam and) |
- |
0 |
|
- |
| 4.7(and then stitching shall be done through six layers.) |
- |
0 |
|
- |
| 4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and) |
- |
0 |
|
- |
| 4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) Non-gusseted type 70 + 6%) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
0 |
|
- |
| 5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
0 |
|
- |
| 4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. ii
(Ends per dm - Annex B 40 ± 2 ) |
- |
0 |
|
- |
| Fig. 1- Table 1-Sr. no. iii
(Picks per dm-Annex B 40 ± 2 ) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note )- Annex B
c) Width of gusset (e) 76 ± 10 mm
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
d) Width of valve (v) 100, + 10/-5 mm
) |
- |
0 |
|
- |
| Fig. 1- Table 1-Sr. no. i
(Dimensions, mm (see Note )- Annex B
b) Width of sack (w) 480 ± 10 mm
) |
- |
0 |
|
- |
| Fig. 1, Table 1
(i) Dimensions, mm (see Note ) -Annex B
a) Length of sack, inside (l), 710 ± 10 mm
) |
- |
0 |
|
- |
| 4.5(and the remaining overhang shall not be more than 5 mm after trimming.) |
- |
0 |
|
- |
| 4.1(Raw Material
) |
- |
0 |
|
- |
| 4.2
(Fabric) |
- |
0 |
|
- |
| 4.2
(Linear Density, 900 denier) |
- |
0 |
|
- |
| 4.2
(The woven fabric shall be
of mesh, 10 × 10 per inch) |
- |
0 |
|
- |
| 4.2
(The woven fabric shall be
of weight, 79 g/m2 ) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances: a) ± 10 percent on individual value, and
) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances:
b) ± 5 percent on average.
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.4(Seam
) |
- |
0 |
|
- |
| 4.4(Seam
) |
- |
0 |
|
- |
| 4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and ) |
- |
0 |
|
- |
| 4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. ) |
- |
0 |
|
- |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
0 |
|
- |
| 4.4(to a depth of minimum 25 mm, so that so that) |
- |
0 |
|
- |
| 4.4(that the stitches pass through a minimum of six layers of the fabric.) |
- |
0 |
|
- |
| 4.4(The number of stitches/dm shall be 14 ± 2.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used
in the fabric.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
0 |
|
- |
| 4.7(Valve for Filling of Sacks) |
- |
0 |
|
- |
| 4.7(There shall be a double fold at the top seam and) |
- |
0 |
|
- |
| 4.7(and then stitching shall be done through six layers.) |
- |
0 |
|
- |
| 4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and) |
- |
0 |
|
- |
| 4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) Non-gusseted type 70 + 6%) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
0 |
|
- |
| 5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
0 |
|
- |
| 4.2
(width of tape, 2.5 mm ± 0.1 mm) |
- |
0 |
|
- |
| Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2) |
- |
0 |
|
- |
| Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2) |
- |
0 |
|
- |
| Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B
c) Width of gusset (e) 76 ± 10 mm) |
- |
0 |
|
- |
| Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B
d) Width of valve (v) 100, + 10/-5 mm) |
- |
0 |
|
- |
| Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B
b) Width of sack (w) 480 ± 10 mm) |
- |
0 |
|
- |
| Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B
a) Length of sack, inside (l), 710 ± 10 mm) |
- |
0 |
|
- |
| 4.5(and the remaining overhang shall not be more than 5 mm after trimming.) |
- |
0 |
|
- |
| 4.1(Raw Material
) |
- |
0 |
|
- |
| 4.2
(Fabric) |
- |
0 |
|
- |
| 4.2
(Linear Density, 900 denier) |
- |
0 |
|
- |
| 4.2
(The woven fabric shall be
of mesh, 10 × 10 per inch) |
- |
0 |
|
- |
| 4.2
(The woven fabric shall be
of weight, 79 g/m2 ) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances: a) ± 10 percent on individual value, and
) |
- |
0 |
|
- |
| 4.2
(The
denier of HDPE/ PP tape used in the manufacture of
woven fabric shall be subjected to the
tolerances:
b) ± 5 percent on average.
) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| Fig. 1- Table 1- Sr. no. i
(Dimensions, mm (see Note ) -Annex B
e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.4(Seam
) |
- |
0 |
|
- |
| 4.4(Seam
) |
- |
0 |
|
- |
| 4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and ) |
- |
0 |
|
- |
| 4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. ) |
- |
0 |
|
- |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
0 |
|
- |
| 4.4(to a depth of minimum 25 mm, so that so that) |
- |
0 |
|
- |
| 4.4(that the stitches pass through a minimum of six layers of the fabric.) |
- |
0 |
|
- |
| 4.4(The number of stitches/dm shall be 14 ± 2.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used
in the fabric.) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.4(Seam) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.5(Lamination ) |
- |
0 |
|
- |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
0 |
|
- |
| 4.7(Valve for Filling of Sacks) |
- |
0 |
|
- |
| 4.7(There shall be a double fold at the top seam and) |
- |
0 |
|
- |
| 4.7(and then stitching shall be done through six layers.) |
- |
0 |
|
- |
| 4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and) |
- |
0 |
|
- |
| 4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks.
) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) Non-gusseted type 70 + 6%) |
- |
0 |
|
- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
0 |
|
- |
| 5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
0 |
|
- |
| 5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
0 |
|
- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6
) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
0 |
|
- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
0 |
|
- |
|
07 Oct, 2028 |
-
Included w.e.f. 20.08.2024 |
| 7258 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 710 (2024) |
MARINE PLYWOOD - SPECIFICATION (Third Revision) |
Class: E1/E2,Thickness: max.25 mm |
17500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(Timber) |
- |
0 |
|
K |
| Cl-4.2(Adhesive) |
- |
8000 |
|
OK |
| Cl-5.1(Veneers) |
- |
0 |
|
OK |
| Cl-5.2.1(Glueing) |
- |
0 |
|
OK |
| Cl -5.2.2(Thickness of Veneers) |
- |
0 |
|
0K |
| Cl - 5.2.3.1(Joint in Veneers) |
- |
0 |
|
0K |
| Cl - 5.2.3.2(Edge joints) |
- |
0 |
|
0K |
| Cl - 5.2.3.3(End joints) |
- |
0 |
|
OK |
| Cl - 5.2.3.4(Scarf joints) |
- |
0 |
|
OK |
| Cl - 5.2.4(Grain Direction) |
- |
0 |
|
OK |
| Cl-5.3(Treatment) |
- |
0 |
|
OK |
| Cl-5.4(Moisture Content) |
- |
0 |
|
OK |
| Cl-6.1(Dimensions (length)) |
- |
500 |
|
OK |
| Cl-6.2(Thickness) |
- |
500 |
|
OK |
| Cl-6.3(Squareness) |
- |
500 |
|
OK |
| Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish) |
- |
500 |
|
OK |
| Cl-9.3(Moisture Content) |
- |
1000 |
|
OK |
| Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies) |
- |
740 |
|
OK |
| Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average) |
- |
740 |
|
OK |
| Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average) |
- |
980 |
|
- |
| Cl-9.5.1.2(Water Resistance Test-Adhesion of plies) |
- |
980 |
|
- |
| Cl-9.5.2(Water Resistance Test) |
- |
0 |
|
OK |
| Cl-9.6(Tensile Strength-Along the grain) |
- |
1000 |
|
OK |
| Cl-9.7(Mycological Test -Adhesion) |
- |
950 |
|
OK |
| Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average) |
- |
950 |
|
OK |
| Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual) |
- |
890 |
|
OK |
| Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average) |
- |
990 |
|
OK |
| Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum
individual) |
- |
990 |
|
OK |
| Cl-9.10(Retention of Preservative) |
- |
1500 |
|
OK |
| Cl-9.11(Formaldehyde Content Test) |
- |
3000 |
|
OK |
| Cl-9.12(Steady-State Formaldehyde Emission Test) |
- |
0 |
|
OK |
| Cl-9.4.2(Adhesion of Plies) |
- |
750 |
|
0 |
| 5.1.1(Defects in veneers) |
- |
100 |
|
0 |
|
17 Mar, 2028 |
-
Exclusion: Cl-9.5.2 (Water Resistance Test), Cl-9.12 (Steady-State Formaldehyde Emission Test) |
| 7259 |
CIPET, Ahmedabad
| 7116134
| IS 16709 (2017) |
Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification |
---- |
24150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.2(Sack Width) |
- |
500 |
|
- |
| 4.1.3(Top Closure Width and Bottom Closure Width) |
- |
500 |
|
- |
| 4.1.4(Patch Length) |
- |
500 |
|
- |
| 4.1.5(Patch Height) |
- |
500 |
|
- |
| 4.1.6(Length of Valve) |
- |
500 |
|
- |
| 4.1.7(Width of Valve Sleeve) |
- |
500 |
|
- |
| 4.1.8(Length of Valve Sleeve) |
- |
500 |
|
- |
| 5.1(Raw Material) |
- |
1050 |
|
- |
| 5.2(Fabric) |
- |
500 |
|
- |
| 5.2(Tape density and width) |
- |
1200 |
|
- |
| 5.4(Lamination for PP) |
- |
1050 |
|
- |
| 5.4(Lamination for LDPE) |
- |
1050 |
|
- |
| 6.1(Mass of Bale) |
- |
500 |
|
- |
| 6.2.1(Breaking Strength and Elongation at Break of Fabric) |
- |
2200 |
|
- |
| 6.2.2(Weld Strength of Top and Bottom Closures) |
- |
1100 |
|
- |
| 6.3(Drop Impact Testing of Filled Sacks) |
- |
1100 |
|
- |
| 6.4(Ash Content) |
- |
1200 |
|
- |
| Cl-5.6(Capacity) |
- |
500 |
|
- |
| Cl- 6.6, Table.-1 (ii)(Ends per dm) |
- |
500 |
|
- |
| Cl-6.6, Table-1 (iii)(Picks per dm) |
- |
500 |
|
- |
| Cl.6.6, Table-1 (vii)(Elongation at break of fabric) |
- |
2200 |
|
- |
| 4.1.1(Sack Length) |
- |
500 |
|
- |
| 8(Atomspheric Conditions for Conditioning and Testing) |
- |
0 |
|
- |
|
31 Dec, 2027 |
-
Included w.e.f. 22.08.2024
Exclusion: Cl.6.5 (Air Permeability) |
| 7260 |
Central Institute of Petrochemicals Engineering & Technology (CIPET), Chandrapur
| 7173804
| IS 16709 (2017) |
Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification |
50kg |
20700.0 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1(Sack Length) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.2(Sack Width) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.3(Top Closure Width and Bottom Closure Width) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.4(Patch Length) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.5(Patch Height) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.6(Length of Valve) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.7(Width of Valve Sleeve) |
- |
500.0 |
|
GST Charges Extra |
| 4.1.8(Length of Valve Sleeve) |
- |
500.0 |
|
GST Charges Extra |
| 5.1(Raw Material) |
- |
2000.0 |
|
GST Charges Extra |
| 5.2(Fabric) |
- |
500.0 |
|
GST Charges Extra |
| 5.2(Tape density and width) |
- |
700.0 |
|
GST Charges Extra |
| 5.4(Lamination for PP) |
- |
2000.0 |
|
GST Charges Extra |
| 5.4(Lamination for LDPE) |
- |
2000.0 |
|
GST Charges Extra |
| 6.1(Mass of Bale) |
- |
500.0 |
|
GST Charges Extra |
| 6.2.1(Breaking Strength and Elongation at Break of Fabric) |
- |
3200.0 |
|
Breaking Strength 1100x2(LW & WW)=2200+Sample preparation charges 1000.0
(GST Charges Extra) |
| 6.2.2(Weld Strength of Top and Bottom Closures) |
- |
1600.0 |
|
Breaking Strength 1100+Sample preparation charges 500.0
(GST Charges Extra) |
| 6.3(Drop Impact Testing of Filled Sacks) |
- |
1100.0 |
|
GST Charges Extra |
| 6.4(Ash Content) |
- |
1200.0 |
|
GST Charges Extra |
| 8(Atomspheric Conditions for Conditioning and Testing) |
- |
400.0 |
|
GST Charges Extra |
| Cl-5.6(Capacity) |
- |
500.0 |
|
GST Charges Extra |
| Cl- 6.6, Table.-1 (ii)(Ends per dm) |
- |
500.0 |
|
GST Charges Extra |
| Cl-6.6, Table-1 (iii)(Picks per dm) |
- |
500.0 |
|
GST Charges Extra |
| Cl.6.6, Table-1 (vii)(Elongation at break of fabric) |
- |
0.0 |
|
- |
|
10 Sep, 2026 |
-
Included w.e.f. 23.08.2024
Exclusion: Cl.6.5 (Air Permeability) |
