BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7381

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	100	-
5.4/Annex D/i(P,P-DDT)	-	100	-
5.4/Annex D/ii(Lindane)	-	200	-
5.4/Annex D/iv(b-Endosulfan)	-	100	-
5.4/Annex D/xvi(Dieldrin)	-	100	-
5.4/Annex D/xvi(Aldrin)	-	200	-
5.4/Annex D/i(O,P-DDT)	-	100	-
5.4/Annex D/iv(a-Endosulfan)	-	100	-
5.4/Annex D/iii(d-HCH)	-	100	-
5.4/Annex D/i(O,P-DDD)	-	100	-
5.4/Annex D/i(P,P-DDE)	-	100	-
5.4/Annex D/i(O,P-DDE)	-	100	-
5.4/Annex D/iii(a-HCH)	-	100	-
5.4/Annex D/iii(β- HCH)	-	100	-
5.4/Annex D/iv(Endosulfan sulfate)	-	200	-
5.4/Annex D/i(P,P-DDD)	-	100	-
5.4/Annex D/xii(Alachlor)	-	100	-
5.4/Annex D/vii(Chlorpyrifos)	-	200	-
5.4/Annex D/x(Butachlor)	-	100	-
5.4/Annex D/vi(Ethion)	-	100	-
5.4/Annex D/xiv(Methyl parathion)	-	200	-
5.4/Annex D/xv(Malathion)	-	200	-
5.4/Annex D/viii(Phorate)	-	100	-
5.4/Annex D/v(Monochrotophos)	-	200	-
5.4/Annex D/xiii(Atrazine)	-	100	-
5.4/Annex D/viii(Phorate sulphoxide)	-	200	-
5.4/Annex D/viii(Phorate sulfone)	-	100	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	100	-
5.4/Annex D/xxviii(Malaoxon)	-	100	-
5.4/Annex D/xi(Isoproturon)	-	200	-
5.4/Annex D/ix(2,4 –D)	-	100	-
Cl-5.1(General Requirements)	-	0	Covered in individual tests
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	470	-
Cl-5.2.2(Coliform)	-	470	-
Cl-5.2.3(Staphylococcus aureus)	-	470	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	470	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	470	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	465	-
Cl-5.2.7(Yeast and mould)	-	470	-
Cl-5.2.8(Salmonella)	-	470	-
Cl-5.2.9(Vibrio cholera)	-	470	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	200	-
Cl-5.3, Table-1 (ii)(Odour)	-	200	-
Cl-5.3, Table-1 (iii)(Taste)	-	200	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	200	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	200	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	200	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	500	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	500	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	200	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	300	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	500	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	200	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	200	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	200	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	300	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2200	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	200	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	200	-
Cl-5.3, Table-3 (x)(Uranium)	-	1500	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	Covered in individual tests
Cl-5.4 (ii)(Total pesticide residue)	-	400	-
Cl-5.2.3(Faecal streptococci)	-	470	-
Cl-5.2.8(shigella)	-	470	-
Cl-5.2.9(V.parahaemolyticus)	-	470	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	465	-
5.4 i)(Dieldrin)	-	0	Already covered above
5.4 i)(Aldrin)	-	0	Already covered above
5.4 i)(Malathion)	-	0	Already covered above
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	Already covered above
5.4 i)(Methyl Paraoxon)	-	0	Already covered above
5.4 i)(Methyl Parathion)	-	0	Already covered above
5.4 i)(Atrazine)	-	0	Already covered above
5.4 i)(Alachlor)	-	0	Already covered above
5.4 i)(Isoproturon)	-	0	Already covered above
5.4 i)(Butachlor)	-	0	Already covered above
5.4 i)(2,4-D)	-	0	Already covered above
5.4 i)(Phorate sulphone)	-	0	Already covered above
5.4 i)(Phorate sulphoxide)	-	0	Already covered above
5.4 i)(Phorate)	-	0	Already covered above
5.4 i)(Chlorpyrifos)	-	0	Already covered above
5.4 i)(Ethion)	-	0	Already covered above
5.4 i)(Monocrotophos)	-	0	Already covered above
5.4 i)(Endosulfan Sulphate)	-	0	Already covered above
5.4 i)(beta-Endosulfan)	-	0	Already covered above
5.4 i)(alpha-Endosulfan)	-	0	Already covered above
5.4 i)(Delta-HCH)	-	0	Already covered above
5.4 i)(beta-HCH)	-	0	Already covered above
5.4 i)(alpha-HCH)	-	0	Already covered above
5.4 i)(Gamma-HCH (Lindane))	-	0	Already covered above
5.4 i)(p,p DDD)	-	0	Already covered above
5.4 i)(o,p DDD)	-	0	Already covered above
5.4 i)(p,p DDE)	-	0	Already covered above
5.4, i)(o,p DDE)	-	0	Already covered above
5.4 i)(p,p DDT)	-	0	Already covered above
5.4 i)(o,p DDT)	-	0	Already covered above
Table 3, x)(Uranium)	-	0	Already covered above
5.3(Appearance)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-

19 Apr, 2028

-
Included.w.e.f.20.01.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

7382

BIS, Patna Branch Laboratory (PBL)

None

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/xvi (Dieldrin)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/ix (2,4 –D)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
Cl-5.4 (ii) (Total pesticide residue)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.9 (V.parahaemolyticus)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.8 (shigella)	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
5.3 (Appearance)	-

-
All test facilities are available as per the IS except Cyanide Test and Radioactive Residue Test (Clause 5.3)

7383

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	300	-
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	1200	-
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	1200	-
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	1200	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	400	-
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	0	-
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	500	-
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	200	-
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	500	-
7(Dimension - IS 3965)	-	800	-
11(Marking)	-	200	-
Table-1, Clause - 5.1(Manganese)	-	500	-
Table-1, Clause - 5.1(Copper)	-	0	-
Table-1, Clause - 5.1(Iron)	-	0	-
Table-1, Clause - 5.1(Magnesium)	-	0	-
Table-1, Clause - 5.1(Titanium)	-	0	-
Table-1, Clause - 5.1(Silicon)	-	0	-
Table-1, Clause - 5.1(Chromium)	-	0	-
Table-1, Clause - 5.1(Zinc)	-	0	-

19 Apr, 2028

-
-

7384

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

All Type

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	500	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	500	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	500	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	500	-
10(Tensile test)	-	1500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	500	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	500	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	500	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	500	-
10(Tensile test)	-	1500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	500	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	500	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	500	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	500	-
10(Tensile test)	-	1500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	500	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	500	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	500	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	500	-
10(Tensile test)	-	1500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	300	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	300	-

-
Included w.e.f 08.05.2025

7385

BLUESKY LAB LLP, GHAZIABAD

8170306

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	800	30% discount offered to BIS
5(General conditions for the tests)	-	600	30% discount offered to BIS
6(Classification)	-	1000	30% discount offered to BIS
7(Marking and instructions)	-	800	30% discount offered to BIS
8(Protection against access to live parts)	-	1000	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	1000	30% discount offered to BIS
10(Power input and current)	-	2000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	2000	30% discount offered to BIS
14(Transient overvoltages)	-	1000	30% discount offered to BIS
15(Moisture resistance)	-	1000	30% discount offered to BIS
16(Leakage current and electric strength)	-	2000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	2000	30% discount offered to BIS
18(Endurance)	-	1000	30% discount offered to BIS
19(Abnormal operation)	-	1000	30% discount offered to BIS
20(Stability and mechanical hazards)	-	1000	30% discount offered to BIS
21(Mechanical strength)	-	2000	30% discount offered to BIS
22(Construction)	-	1000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
24(Components)	-	500	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	500	30% discount offered to BIS
26(Terminals for external conductors)	-	1000	30% discount offered to BIS
27(Provision for earthing)	-	1000	30% discount offered to BIS
28(Screws and connections)	-	1000	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	1000	30% discount offered to BIS
30(Resistance to heat and fire)	-	1000	30% discount offered to BIS
31(Resistance to rusting)	-	1000	30% discount offered to BIS
A.101(Pressure test)	-	500	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	500	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	500	30% discount offered to BIS
22.101(rated pressure)	-	500	30% discount offered to BIS
22.102(Closed water heaters)	-	500	30% discount offered to BIS
22.103(Addition)	-	500	30% discount offered to BIS
22.104(Addition)	-	500	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	500	30% discount offered to BIS
22.109(Addition)	-	500	30% discount offered to BIS
4(General requirement)	-	500	30% discount offered to BIS
5(General conditions for the tests)	-	500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
7(Marking and instructions)	-	500	30% discount offered to BIS
8(Protection against access to live parts)	-	500	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	1000	30% discount offered to BIS
10(Power input and current)	-	2000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	2000	30% discount offered to BIS
14(Transient overvoltages)	-	1000	30% discount offered to BIS
15(Moisture resistance)	-	1000	30% discount offered to BIS
16(Leakage current and electric strength)	-	2000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	1000	30% discount offered to BIS
18(Endurance)	-	1000	30% discount offered to BIS
19(Abnormal operation)	-	1000	30% discount offered to BIS
20(Stability and mechanical hazards)	-	5000	30% discount offered to BIS
21(Mechanical strength)	-	2000	30% discount offered to BIS
22(Construction)	-	2000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
24(Components)	-	500	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	1000	30% discount offered to BIS
26(Terminals for external conductors)	-	1000	30% discount offered to BIS
27(Provision for earthing)	-	2000	30% discount offered to BIS
28(Screws and connections)	-	1000	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	2000	30% discount offered to BIS
30(Resistance to heat and fire)	-	1000	30% discount offered to BIS
31(Resistance to rusting)	-	1000	30% discount offered to BIS
A.101(Pressure test)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1000	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	1000	30% discount offered to BIS
22.101(rated pressure)	-	1000	30% discount offered to BIS
22.102(Closed water heaters)	-	1000	30% discount offered to BIS
22.103(Addition)	-	1000	30% discount offered to BIS
22.104(Addition)	-	1000	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	1000	30% discount offered to BIS
22.109(Addition)	-	1000	30% discount offered to BIS
4(General requirement)	-	500	30% discount offered to BIS
5(General conditions for the tests)	-	500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
7(Marking and instructions)	-	500	30% discount offered to BIS
8(Protection against access to live parts)	-	1000	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	1000	30% discount offered to BIS
10(Power input and current)	-	1000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	2000	30% discount offered to BIS
14(Transient overvoltages)	-	1000	30% discount offered to BIS
15(Moisture resistance)	-	1000	30% discount offered to BIS
16(Leakage current and electric strength)	-	2000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	1000	30% discount offered to BIS
18(Endurance)	-	1000	30% discount offered to BIS
19(Abnormal operation)	-	1000	30% discount offered to BIS
20(Stability and mechanical hazards)	-	1000	30% discount offered to BIS
21(Mechanical strength)	-	1000	30% discount offered to BIS
22(Construction)	-	2000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
24(Components)	-	1000	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	1000	30% discount offered to BIS
26(Terminals for external conductors)	-	1000	30% discount offered to BIS
27(Provision for earthing)	-	1000	30% discount offered to BIS
28(Screws and connections)	-	500	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	1000	30% discount offered to BIS
30(Resistance to heat and fire)	-	1000	30% discount offered to BIS
31(Resistance to rusting)	-	500	30% discount offered to BIS
A.101(Pressure test)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1000	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	500	30% discount offered to BIS
22.101(rated pressure)	-	1000	30% discount offered to BIS
22.102(Closed water heaters)	-	500	30% discount offered to BIS
22.103(Addition)	-	1000	30% discount offered to BIS
22.104(Addition)	-	500	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	500	30% discount offered to BIS
22.109(Addition)	-	500	30% discount offered to BIS
4(General requirement)	-	500	30% discount offered to BIS
5(General conditions for the tests)	-	500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
7(Marking and instructions)	-	500	30% discount offered to BIS
8(Protection against access to live parts)	-	1000	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	1000	30% discount offered to BIS
10(Power input and current)	-	2000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	2000	30% discount offered to BIS
14(Transient overvoltages)	-	1000	30% discount offered to BIS
15(Moisture resistance)	-	1000	30% discount offered to BIS
16(Leakage current and electric strength)	-	1000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	2000	30% discount offered to BIS
18(Endurance)	-	1000	30% discount offered to BIS
19(Abnormal operation)	-	1000	30% discount offered to BIS
20(Stability and mechanical hazards)	-	1000	30% discount offered to BIS
21(Mechanical strength)	-	1000	30% discount offered to BIS
22(Construction)	-	1000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
24(Components)	-	1000	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	1000	30% discount offered to BIS
26(Terminals for external conductors)	-	1000	30% discount offered to BIS
27(Provision for earthing)	-	1000	30% discount offered to BIS
28(Screws and connections)	-	1000	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	1000	30% discount offered to BIS
30(Resistance to heat and fire)	-	1000	30% discount offered to BIS
31(Resistance to rusting)	-	1000	30% discount offered to BIS
A.101(Pressure test)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1000	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	1000	30% discount offered to BIS
22.101(rated pressure)	-	1000	30% discount offered to BIS
22.102(Closed water heaters)	-	1000	30% discount offered to BIS
22.103(Addition)	-	1000	30% discount offered to BIS
22.104(Addition)	-	1000	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	1000	30% discount offered to BIS
22.109(Addition)	-	1000	30% discount offered to BIS
4(General requirement)	-	500	30% discount offered to BIS
5(General conditions for the tests)	-	500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
7(Marking and instructions)	-	1000	30% discount offered to BIS
8(Protection against access to live parts)	-	1000	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	2000	30% discount offered to BIS
10(Power input and current)	-	2000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	2000	30% discount offered to BIS
14(Transient overvoltages)	-	2000	30% discount offered to BIS
15(Moisture resistance)	-	2000	30% discount offered to BIS
16(Leakage current and electric strength)	-	2000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	2000	30% discount offered to BIS
18(Endurance)	-	500	30% discount offered to BIS
19(Abnormal operation)	-	500	30% discount offered to BIS
20(Stability and mechanical hazards)	-	500	30% discount offered to BIS
21(Mechanical strength)	-	500	30% discount offered to BIS
22(Construction)	-	500	30% discount offered to BIS
23(Internal wiring)	-	500	30% discount offered to BIS
24(Components)	-	500	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	2000	30% discount offered to BIS
26(Terminals for external conductors)	-	2000	30% discount offered to BIS
27(Provision for earthing)	-	2000	30% discount offered to BIS
28(Screws and connections)	-	2000	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	2000	30% discount offered to BIS
30(Resistance to heat and fire)	-	1000	30% discount offered to BIS
31(Resistance to rusting)	-	1000	30% discount offered to BIS
A.101(Pressure test)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1000	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	1000	30% discount offered to BIS
22.101(rated pressure)	-	1000	30% discount offered to BIS
22.102(Closed water heaters)	-	1000	30% discount offered to BIS
22.103(Addition)	-	1000	30% discount offered to BIS
22.104(Addition)	-	1000	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	1000	30% discount offered to BIS
22.109(Addition)	-	1000	30% discount offered to BIS
4(General requirement)	-	500	30% discount offered to BIS
5(General conditions for the tests)	-	500	30% discount offered to BIS
6(Classification)	-	500	30% discount offered to BIS
7(Marking and instructions)	-	1000	30% discount offered to BIS
8(Protection against access to live parts)	-	1000	30% discount offered to BIS
9(Starting of motor-operated appliances)	-	1000	30% discount offered to BIS
10(Power input and current)	-	2000	30% discount offered to BIS
11(Heating)	-	2000	30% discount offered to BIS
13(Leakage current and electric strength at operating temperature)	-	1000	30% discount offered to BIS
14(Transient overvoltages)	-	1000	30% discount offered to BIS
15(Moisture resistance)	-	1000	30% discount offered to BIS
16(Leakage current and electric strength)	-	2000	30% discount offered to BIS
17(Overload protection of transformers and associated circuits)	-	1000	30% discount offered to BIS
18(Endurance)	-	2000	30% discount offered to BIS
19(Abnormal operation)	-	1000	30% discount offered to BIS
20(Stability and mechanical hazards)	-	1000	30% discount offered to BIS
21(Mechanical strength)	-	1000	30% discount offered to BIS
22(Construction)	-	1000	30% discount offered to BIS
23(Internal wiring)	-	1000	30% discount offered to BIS
24(Components)	-	1000	30% discount offered to BIS
25(Supply connection and external flexible cords)	-	1000	30% discount offered to BIS
26(Terminals for external conductors)	-	1000	30% discount offered to BIS
27(Provision for earthing)	-	1000	30% discount offered to BIS
28(Screws and connections)	-	1000	30% discount offered to BIS
29(Clearances, creepage distances and solid insulation)	-	2000	30% discount offered to BIS
30(Resistance to heat and fire)	-	2000	30% discount offered to BIS
31(Resistance to rusting)	-	2000	30% discount offered to BIS
A.101(Pressure test)	-	1000	30% discount offered to BIS
19.11.4.4(Surge immunity test)	-	1000	30% discount offered to BIS
12(Charging of metal-ion batteries)	-	1000	30% discount offered to BIS
22.101(rated pressure)	-	1000	30% discount offered to BIS
22.102(Closed water heaters)	-	1000	30% discount offered to BIS
22.103(Addition)	-	1000	30% discount offered to BIS
22.104(Addition)	-	1000	30% discount offered to BIS
22.105(Cistern-type water heaters)	-	1000	30% discount offered to BIS
22.109(Addition)	-	1000	30% discount offered to BIS

22 May, 2028

-
Included.w.e.f.23.12.2024 exclusion CL 19.11.4.1 (Electrostatic discharges) CL 19.11.4.2 (Radiated fields) CL 19.11.4.3 (Fast transient bursts) CL 19.11.4.5 (Immunity to conducted discharges) CL 19.11.4.6 (Class 3 Voltage dips and interruptions) CL 19.11.4.7 (Harmonics) CL 32 (Radiation, toxicity and similar hazards) CL 24 (Components)

7386

SMS Labs Services Private Limited, Chennai

6132316

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	500	--
4.6.2(TRANSPARANCY)	-	500	--
4.6.3(LEAKAGE TEST)	-	250	--
4.6.4(DROP TEST)	-	500	--
4.6.5(MIGRATION TEST)	-	1000	--
4.6.6(PORTABILITY TEST)	-	1000	--
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	1000	--
4.6.5.1 (chem)(Colour migration (Caps))	-	1000	--
4.6.5.1 (chem)(Colour migration (Container))	-	1000	--
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1000	--
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	1000	--
4.6.4, clause 8 of IS:2798:1998(Drop test )	-	500	--
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	250	--
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	250	--
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	250	--
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	250	--
4.2(Design, Shape & Dimension )	-	100	--
4.3(Workmanship, Finish & Appearance)	-	200	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	500	--
CL 4.6.7.2 and 4.6.7.3, Table 3 (vii)(Zinc)	-	500	--
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	500	--
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	3000	--
Cl. 4.5(Cl. 4.5 Wall Thickness (Bottom))	-	250	--
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	250	--
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	250	--

08 Oct, 2027

-
-

7387

SMS Labs Services Private Limited, Chennai

6132316

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

14200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Description)	-	100	--
6.1.2(Film Form)	-	200	--
6.1.3(Winding of the Film )	-	200	--
6.1.4(Odour)	-	100	--
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	100	--
6.1.6(Width)	-	100	--
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	1000	--
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	1000	--
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	1000	--
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	1000	--
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	1000	--
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1000	--
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	1000	--
7.5 Annex J(Product resistance test for printed pouches)	-	100	--
7.4 Annex H(Ink adhesion test for printed pouches)	-	100	--
7.3 Annex G(Drop test )	-	100	--
7.2 Annex F(Stack Load test)	-	100	--
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (i)(Barium)	-	500	---
CL 6.1.11.2 and 6.1.11.3, Table 3 (ii)(Cobalt)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (iii)(Copper)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (iv)(Iron)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (v)(Lithium)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (vi)(Manganese)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (vii)(Zinc)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (viii)(Antimony)	-	500	--
CL 6.1.11.2 and 6.1.11.3, Table 3 (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	3000	--

08 Oct, 2027

-
-

7388

SMS Labs Services Private Limited, Chennai

6132316

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

21300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Moisture)	-	750	--
5.6(Milk protein in milk solids not fat)	-	750	--
5.6(Milk fat)	-	750	--
5.6(Insolubility index)	-	1000	--
5.6(Total ash (on dry basis))	-	750	--
5.6(Titratable acidity (lactic acid))	-	750	--
5.6(Scorched particles)	-	1000	--
5.6(Bacterial count)	-	500	--
5.6(Coliform count )	-	500	--
5.6(Escherichia coli)	-	600	--
5.6(Coagulase positive Staphylococcus aureus)	-	400	--
5.6(Salmonella)	-	950	--
5.6(Spore count, Aerobic (Bacillus cereus))	-	500	--
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	500	--
5.6(Listeria monocytogenes)	-	1000	--
5.7(Pesticides, Heavy metals, toxins & contaminants)	-	10600	5000 for all pesticides 600 for Heavy Metals 5000 for toxin

08 Oct, 2027

-
-

7389

SMS Labs Services Private Limited, Chennai

6132316

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

18150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4.5(Moisture)	-	750	--
3.4.5(Total solids)	-	750	--
3.4.5(Fat)	-	750	--
3.4.5(Insolubility index)	-	1000	--
3.4.5(Total ash)	-	750	--
3.4.5(Titratable acidity (lactic acid))	-	500	--
3.5(Bacterial count)	-	500	--
3.5.2(Coliform count)	-	400	--
3.5.3(Staphylococcus Aureus)	-	400	--
3.5.4(Salmonella)	-	950	--
3.5.5(Shigella)	-	950	--
3.5, Table 1 (iv)(Milk protein in milk solids not fat-IS 11917)	-	750	--
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	500	--
3.5, Table 1 (viii)(Scorched Particles - IS 13500)	-	1000	--
"3.5 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	500	--
"3.5 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	1000	--
"3.5 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	500	--
"3.5 Table 2 (viii) "(Sulphite reducing clostridia-ISO 15213)	-	500	--
"3.5 Table 2 (ix) "(Escherichia coli-IS 5887 (Part 1))	-	600	---
3.6(Pesticide Residues)	-	5000	5000 for all pesticides
3.6(2,4-Dichlorophenoxy Acetic acid)	-	5000	5000 for all pesticides
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	5000	5000 for all pesticides
3.6(Acetamiprid)	-	5000	5000 for all pesticides
3.6(Azoxystrobin)	-	5000	5000 for all pesticides
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	5000	5000 for all pesticides
3.6(Bifenthrin)	-	5000	5000 for all pesticides
3.6(Bitertanol)	-	5000	5000 for all pesticides
3.6(Buprofezin)	-	5000	5000 for all pesticides
3.6(Carbaryl)	-	5000	5000 for all pesticides
3.6(Carbendazim)	-	5000	5000 for all pesticides
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	5000	5000 for all pesticides
3.6(Chlorantraniliprole)	-	5000	5000 for all pesticides
3.6(Chlorothalonil)	-	5000	5000 for all pesticides
3.6(Chlorpyriphos)	-	5000	5000 for all pesticides
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	5000	5000 for all pesticides
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	5000	5000 for all pesticides
3.6(Deltamethrin (Decamethrin))	-	5000	5000 for all pesticides
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	5000	5000 for all pesticides
3.6(Difenoconazole)	-	5000	5000 for all pesticides
3.6(Dimethoate)	-	5000	5000 for all pesticides
3.6(Dinotefuron)	-	5000	5000 for all pesticides
3.6(Mancozeb)	-	5000	5000 for all pesticides
3.6(metiram as CS2)	-	5000	5000 for all pesticides
3.6(Edifenphos)	-	5000	5000 for all pesticides
3.6(Emamectin Benzoate)	-	5000	5000 for all pesticides
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	5000	5000 for all pesticides
3.6(Ethofenprox (Etofenprox))	-	5000	5000 for all pesticides
3.6(Fenpropathrin)	-	5000	5000 for all pesticides
3.6(Fenvalerate (fat soluble residue))	-	5000	5000 for all pesticides
3.6(Fipronil)	-	5000	5000 for all pesticides
3.6(Flubendiamide)	-	5000	5000 for all pesticides
3.6(Flusilazole)	-	5000	5000 for all pesticides
3.6(Glufosinate Ammonium)	-	5000	5000 for all pesticides
3.6(Imidacloprid)	-	5000	5000 for all pesticides
3.6(Indoxacarb)	-	5000	5000 for all pesticides
3.6(Kresoxim Methyl)	-	5000	5000 for all pesticides
3.6(Methomyl)	-	5000	5000 for all pesticides
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	5000	5000 for all pesticides
3.6(Metolachlor)	-	5000	5000 for all pesticides
3.6(Monocrotophos)	-	5000	5000 for all pesticides
3.6(Oxydemeton-Methyl)	-	5000	5000 for all pesticides
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	5000	5000 for all pesticides
3.6(Penconazole)	-	5000	5000 for all pesticides
3.6(Phenthoate)	-	5000	5000 for all pesticides
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	5000	5000 for all pesticides
3.6(Pirimiphos-methyl)	-	5000	5000 for all pesticides
3.6(Propiconazole)	-	5000	5000 for all pesticides
3.6(Pyraclostrobin)	-	5000	5000 for all pesticides
3.6(Tebuconazole)	-	5000	5000 for all pesticides
3.6(Thiacloprid)	-	5000	5000 for all pesticides
3.6(Thiophanate-Methyl)	-	5000	5000 for all pesticides
3.6(Thiamethoxam)	-	5000	5000 for all pesticides
3.6(Triacontanol)	-	5000	5000 for all pesticides
3.6(Triadimefon)	-	5000	5000 for all pesticides
3.6(Trichlorfon)	-	5000	5000 for all pesticides
3.6("Antibiotic and Veterinary drug residues ")	-	5000	5000 for all pesticides
3.6(Ampicillin)	-	5000	5000 for all pesticides
3.6(Apramycin)	-	5000	5000 for all pesticides
3.6(Albendazole)	-	5000	5000 for all pesticides
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	5000	5000 for all pesticides
3.6(Ceftiofur)	-	5000	5000 for all pesticides
3.6(Cefphactril)	-	5000	5000 for all pesticides
3.6(Doramectin)	-	5000	5000 for all pesticides
3.6(Diminazene)	-	5000	5000 for all pesticides
3.6(Flunixin)	-	5000	5000 for all pesticides
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	5000	5000 for all pesticides
3.6(Ivermectin)	-	5000	5000 for all pesticides
3.6(Lincomycin)	-	5000	5000 for all pesticides
3.6(Monensin)	-	5000	5000 for all pesticides
3.6(Meloxicam)	-	5000	5000 for all pesticides
3.6(Neomycin)	-	5000	5000 for all pesticides
3.6(Oxyclozanide)	-	5000	5000 for all pesticides
3.6(Parbendazole)	-	5000	5000 for all pesticides
3.6(Praziquantel)	-	5000	5000 for all pesticides
3.6(Spectinomycin)	-	5000	5000 for all pesticides
3.6(Sulfadiazine)	-	5000	5000 for all pesticides
3.6(Sulfanilamide)	-	5000	5000 for all pesticides
3.6(Sulfaquinoxaline)	-	5000	5000 for all pesticides
3.6(Sulfadimidine)	-	5000	5000 for all pesticides
Clause 3.5,Table 1 ,Sl No i)(Moisture)	-	750	--
Clause 3.5,Table 1 ,Sl No ii)(Total solids)	-	750	--
Clause 3.5,Table 1 ,Sl No iii)(Milk fat)	-	750	--
Clause 3.5,Table 1 ,Sl No v)(Insolubility index)	-	1000	--
Clause 3.5,Table 1 ,Sl No vi)(Total ash(on dry basis))	-	750	--
Clause 3.5,Table 2 ,Sl No i)(Aerobic plate count)	-	500	--
Clause 3.5,Table 2 ,Sl No ii)(Coliform Count)	-	400	--
Clause 3.5,Table 2 ,Sl No iii)(Staphylococcus aureus(Coagulase positive))	-	400	--
Clause 3.5,Table 2 ,Sl No v)(Salmonella sp)	-	950	--
3.5, Table 1 (vii)(Titratable acidity (lactic acid), as ml of 0.1 N NaOH /10g solids not fat - IS 11765)	-	500	--
Clause 3.5,Table 1 ,Sl No viii)(Scorched particle)	-	1000	--
Clause 3.5,Table 2 ,Sl No iv)(Yeast and mould count)	-	500	--
Clause 3.5,Table 2 ,Sl No vi)(Listeria monocytogenes)	-	1000	--
Clause 3.5,Table 2 ,Sl No vii)(Bacillus cereus)	-	500	--
Clause 3.5,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	500	--
Clause 3.5,Table 2 ,Sl No ix)(E. coli)	-	600	--
3.6(Pesticide residue)	-	5000	5000 for all pesticides
3.6(2,4-Dichlorophenoxy Acetic acid)	-	5000	5000 for all pesticides
3.6(Acephate (expressed as mixture of Methamidophos and acephate))	-	5000	5000 for all pesticides
3.6(Acetamiprid)	-	5000	5000 for all pesticides
3.6(Azoxystrobin)	-	5000	5000 for all pesticides
3.6(Sum of benomyl & carbendazim expressed as carbendazim))	-	5000	5000 for all pesticides
3.6(Bifenthrin)	-	5000	5000 for all pesticides
3.6(Bitertanol)	-	5000	5000 for all pesticides
3.6(Buprofezin)	-	5000	5000 for all pesticides
3.6(Carbaryl)	-	5000	5000 for all pesticides
3.6(Carbendazim)	-	5000	5000 for all pesticides
3.6(Carbofuran (sum of carbofuran & 3-hydroxy carbofuran expressedas carbofuran))	-	5000	5000 for all pesticides
3.6(Chlorantraniliprole)	-	5000	5000 for all pesticides
3.6(Chlorothalonil)	-	5000	5000 for all pesticides
3.6(Chlorpyriphos)	-	5000	5000 for all pesticides
3.6(Chlothianidin (Chlothianidin & its metabolite Thiazolymethylguanidine(TMG) ,Thiazolymethylurea(TZMU),Methylnitroguanidine(MNG))	-	5000	5000 for all pesticides
3.6(Cypermethrin (sum of isomers) (Fat soluble residue))	-	5000	5000 for all pesticides
3.6(Deltamethrin (Decamethrin))	-	5000	5000 for all pesticides
3.6(Dichlorvos (DDVP) (content of dichloroacetaldehyde (D.C.A.))	-	5000	5000 for all pesticides
3.6(Difenoconazole)	-	5000	5000 for all pesticides
3.6(Dimethoate)	-	5000	5000 for all pesticides
3.6(Dinotefuron)	-	5000	5000 for all pesticides
3.6(Mancozeb)	-	5000	5000 for all pesticides
3.6(metiram as CS2)	-	5000	5000 for all pesticides
3.6(Edifenphos)	-	5000	5000 for all pesticides
3.6(Emamectin Benzoate)	-	5000	5000 for all pesticides
3.6(Ethion (Residues to be determined as ethion & its oxygen analogue and expressed as ethion))	-	5000	5000 for all pesticides
3.6(Ethofenprox (Etofenprox))	-	5000	5000 for all pesticides
3.6(Fenpropathrin)	-	5000	5000 for all pesticides
3.6(Fenvalerate (fat soluble residue))	-	5000	5000 for all pesticides
3.6(Fipronil)	-	5000	5000 for all pesticides
3.6(Flubendiamide)	-	5000	5000 for all pesticides
3.6(Flusilazole)	-	5000	5000 for all pesticides
3.6(Glufosinate Ammonium)	-	5000	5000 for all pesticides
3.6(Imidacloprid)	-	5000	5000 for all pesticides
3.6(Indoxacarb)	-	5000	5000 for all pesticides
3.6(Kresoxim Methyl)	-	5000	5000 for all pesticides
3.6(Methomyl)	-	5000	5000 for all pesticides
3.6(Methyl Chlorophenoxy Acetic Acid (MCPA))	-	5000	5000 for all pesticides
3.6(Metolachlor)	-	5000	5000 for all pesticides
3.6(Monocrotophos)	-	5000	5000 for all pesticides
3.6(Oxydemeton-Methyl)	-	5000	5000 for all pesticides
3.6(Paraquat dichloride (Determined as Paraquatcations))	-	5000	5000 for all pesticides
3.6(Penconazole)	-	5000	5000 for all pesticides
3.6(Phenthoate)	-	5000	5000 for all pesticides
3.6(Phorate (sum of phorate,its oxygen analogue and their sulphoxides & sulphones, expressed as Phorate))	-	5000	5000 for all pesticides
3.6(Pirimiphos-methyl)	-	5000	5000 for all pesticides
3.6(Propiconazole)	-	5000	5000 for all pesticides
3.6(Pyraclostrobin)	-	5000	5000 for all pesticides
3.6(Tebuconazole)	-	5000	5000 for all pesticides
3.6(Thiacloprid)	-	5000	5000 for all pesticides
3.6(Thiophanate-Methyl)	-	5000	5000 for all pesticides
3.6(Thiamethoxam)	-	5000	5000 for all pesticides
3.6(Triacontanol)	-	5000	5000 for all pesticides
3.6(Triadimefon)	-	5000	5000 for all pesticides
3.6(Trichlorfon)	-	5000	5000 for all pesticides
3.6("Antibiotic and Veterinary drug residues ")	-	5000	5000 for all pesticides
3.6(Ampicillin)	-	5000	5000 for all pesticides
3.6(Apramycin)	-	5000	5000 for all pesticides
3.6(Albendazole)	-	5000	5000 for all pesticides
3.6(Chlotetracycline/Oxytetracycline/Tetracycline)	-	5000	5000 for all pesticides
3.6(Ceftiofur)	-	5000	5000 for all pesticides
3.6(Cefphactril)	-	5000	5000 for all pesticides
3.6(Doramectin)	-	5000	5000 for all pesticides
3.6(Diminazene)	-	5000	5000 for all pesticides
3.6(Flunixin)	-	5000	5000 for all pesticides
3.6(Febantel/Fenbendazole/Oxyfendazole)	-	5000	5000 for all pesticides
3.6(Ivermectin)	-	5000	5000 for all pesticides
3.6(Lincomycin)	-	5000	5000 for all pesticides
3.6(Monensin)	-	5000	5000 for all pesticides
3.6(Meloxicam)	-	5000	5000 for all pesticides
3.6(Neomycin)	-	5000	5000 for all pesticides
3.6(Oxyclozanide)	-	5000	5000 for all pesticides
3.6(Praziquantel)	-	5000	5000 for all pesticides
3.6(Parbendazole)	-	5000	5000 for all pesticides
3.6(Spectinomycin)	-	5000	5000 for all pesticides
3.6(Sulfadiazine)	-	5000	5000 for all pesticides
3.6(Sulfanilamide)	-	5000	5000 for all pesticides
3.6(Sulfaquinoxaline)	-	5000	5000 for all pesticides
3.6(Sulfadimidine)	-	5000	5000 for all pesticides
3.6(Sulfa Chloropyrazine)	-	5000	5000 for all pesticides
3.6(Thiabendazole)	-	5000	5000 for all pesticides
3.6(Trimethoprim)	-	5000	5000 for all pesticides
3.6(Tylosin)	-	5000	5000 for all pesticides
3.6(Virginiamycin)	-	5000	5000 for all pesticides
3.7, Table 3 (i)(Lead -IS 12074)	-	300	--
3.7, Table 3 (ii)(Arsenic - IS 11124)	-	300	--
3.7, Table 3 (iii)(Aflatoxin M1 - ISO 14501 or ISO 14674 or any other international validated method)	-	2000	--
3.7, Table 3 (iv)(Melamine - IS 16195)	-	3000	--

08 Oct, 2027

-
-

7390

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	4000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	4000	-
14(Transient Over Voltages, IS 302-1)	-	3000	-
15(Moisture Resistance, IS 302-1)	-	6000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1500	-
19.1(Abnormal Operation, IS 302-1)	-	4500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1500	-
21.1(Mechanical Strength, IS 302-1)	-	1500	-
22(Construction, IS 302-1)	-	1500	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	2500	-
31(Resistance of Rusting, IS 302-1)	-	2000	-
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.3(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.4(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.6(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.7(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.8(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.11(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.12(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.13(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.14(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.15(Marking- IS 302-1)	-	0	Refer charges in Clause 7.1
7.101(Marking)	-	0	Refer charges in Clause 7.1
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Repeated Clause
15.1(Moisture Resistance, IS 302-1)	-	0	Refer charges in Clause 15
15.2(Moisture Resistance, IS 302-1)	-	0	Refer charges in Clause 15
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Repeated Clause
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	Repeated Clause
19.7(Abnormal Operation, IS 302-1)	-	0	Refer charges in Clause 19.1
19.8(Abnormal Operation, IS 302-1)	-	0	Refer charges in Clause 19.1
19.9(Abnormal Operation, IS 302-1)	-	0	Refer charges in Clause 19.1
19.101(Abnormal Operation)	-	0	Refer charges in Clause 19.1
19.102(Abnormal Operation)	-	0	Refer charges in Clause 19.1
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Refer charges in Clause 20.1
20.101(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.102(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.103(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.104(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.105(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.106(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.107(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.108(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.109(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.110(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.111(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.112(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.113(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.114(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.115(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
20.116(Stability & Mechanical Hazards)	-	0	Refer charges in Clause 20.1
21.2(Mechanical Strength, IS 302-1)	-	0	Refer charges in Clause 21.1
22.101(Construction)	-	0	Refer charges in Clause 22
22.102(Construction)	-	0	Refer charges in Clause 22
23.2(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.3(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.4(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.5(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.6(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.7(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.8(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.9(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
23.10(Internal Wiring, IS 302-1)	-	0	Refer charges in Clause 23.1
24.2(Components, IS 302-1)	-	0	Refer charges in Clause 24.1
24.5(Components, IS 302-1)	-	0	Refer charges in Clause 24.1
24.6(Components, IS 302-1)	-	0	Refer charges in Clause 24.1
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Refer charges in Clause 25.1
27.2(Provision for Earthing, IS 302-1)	-	0	Refer charges in Clause 27
27.3(Provision for Earthing, IS 302-1)	-	0	Refer charges in Clause 27
27.4(Provision for Earthing, IS 302-1)	-	0	Refer charges in Clause 27
27.5(Provision for Earthing, IS 302-1)	-	0	Refer charges in Clause 27
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Refer charges in Clause 29.1
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	Refer charges in Clause 30.1
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
27(Provision for Earthing)	-	0	Repeated Clause
29(Clearances, Creepage distances and Solid Insulation)	-	0	Refer charges in Clause 29.1
7.1(Marking- IS 302-1)	-	0	Repeated Clause
8( Protection Against Electric Shock, IS 302-1)	-	0	Repeated Clause
10(Power Input and Current, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	Repeated Clause
14(Transient Over Voltages, IS 302-1)	-	0	Repeated Clause
15(Moisture Resistance, IS 302-1)	-	0	Repeated Clause
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	Repeated Clause
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	Repeated Clause
19.1(Abnormal Operation, IS 302-1)	-	0	Repeated Clause
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated Clause
21.1(Mechanical Strength, IS 302-1)	-	0	Repeated Clause
22(Construction, IS 302-1)	-	0	Repeated Clause
23.1(Internal Wiring, IS 302-1)	-	0	Repeated Clause
24.1(Components, IS 302-1)	-	0	Repeated Clause
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
26(Terminals for External Conductors, IS 302-1)	-	0	Repeated Clause
27(Provision for Earthing, IS 302-1)	-	0	Repeated Clause
28(Screws & Connections, IS 302-1)	-	0	Repeated Clause
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Repeated Clause
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	Repeated Clause
31(Resistance of Rusting, IS 302-1)	-	0	Repeated Clause
6(Classification- IS 302-1 )	-	0	Repeated Clause
6(Classification- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.1(Marking- IS 302-1)	-	0	Repeated Clause
7.3(Marking- IS 302-1)	-	0	Repeated Clause
7.4(Marking- IS 302-1)	-	0	Repeated Clause
7.6(Marking- IS 302-1)	-	0	Repeated Clause
7.7(Marking- IS 302-1)	-	0	Repeated Clause
7.8(Marking- IS 302-1)	-	0	Repeated Clause
7.11(Marking- IS 302-1)	-	0	Repeated Clause
7.12(Marking- IS 302-1)	-	0	Repeated Clause
7.13(Marking- IS 302-1)	-	0	Repeated Clause
7.14(Marking- IS 302-1)	-	0	Repeated Clause
7.15(Marking- IS 302-1)	-	0	Repeated Clause
7.101(Marking)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
11(Heating, IS 302-1)	-	0	Repeated Clause
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Repeated Clause
15.1(Moisture Resistance, IS 302-1)	-	0	Repeated Clause
15.2(Moisture Resistance, IS 302-1)	-	0	Repeated Clause
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Repeated Clause
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	Repeated Clause
19.7(Abnormal Operation, IS 302-1)	-	0	Repeated Clause
19.8(Abnormal Operation, IS 302-1)	-	0	Repeated Clause
19.9(Abnormal Operation, IS 302-1)	-	0	Repeated Clause
19.101(Abnormal Operation)	-	0	Repeated Clause
19.102(Abnormal Operation)	-	0	Repeated Clause
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated Clause
20.101(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.102(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.103(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.104(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.105(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.106(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.107(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.108(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.109(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.110(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.111(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.112(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.113(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.114(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.115(Stability & Mechanical Hazards)	-	0	Repeated Clause
20.116(Stability & Mechanical Hazards)	-	0	Repeated Clause
21.2(Mechanical Strength, IS 302-1)	-	0	Repeated Clause
22.101(Construction)	-	0	Repeated Clause
22.102(Construction)	-	0	Repeated Clause
23.2(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.3(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.4(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.5(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.6(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.7(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.8(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.9(Internal Wiring, IS 302-1)	-	0	Repeated Clause
23.10(Internal Wiring, IS 302-1)	-	0	Repeated Clause
24.2(Components, IS 302-1)	-	0	Repeated Clause
24.5(Components, IS 302-1)	-	0	Repeated Clause
24.6(Components, IS 302-1)	-	0	Repeated Clause
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated Clause
27.2(Provision for Earthing, IS 302-1)	-	0	Repeated Clause
27.3(Provision for Earthing, IS 302-1)	-	0	Repeated Clause
27.4(Provision for Earthing, IS 302-1)	-	0	Repeated Clause
27.5(Provision for Earthing, IS 302-1)	-	0	Repeated Clause
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Repeated Clause
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	Repeated Clause
4(GENERAL REQUIREMENTS)	-	0	Repeated Clause
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	Repeated Clause
27(Provision for Earthing)	-	0	Repeated Clause
29(Clearances, Creepage distances and Solid Insulation)	-	0	Repeated Clause

27 Oct, 2028

-
Included.w.e.f.10.01.2025 Exclusion Cl 32 (Radiation Toxicity and Similar Hazards) Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics) Cl 22 (Construction verification related test)

7391

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All Grade / Type / Size / Designation etc.

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 18.12.2024

7392

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

UP TO 500MM OUTSIDE DIAMETER

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	250	-
10.1(Surface Finish)	-	250	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	250	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	500	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	250	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3500	-
11.2(Resistance to External Blows at 0°C)	-	2500	-
10.3(Effect on Water Test)	-	4000	-
6.1.2(PVC Resin)	-	2500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	-
7.1.4(Length)	-	250	-
6.1.1(VCM Content)	-	2500	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
13.1(Marking)	-	0	-
10.1(Colour)	-	0	-
10.1(Surface Finish)	-	0	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	250	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
8(SEALING RINGS)	-	250	-
9.1(PIPE ENDS)	-	0	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1500	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	12000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	3500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	12000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	3500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	3500	-
11.2(Resistance to External Blows at 0°C)	-	2500	-
10.3(Effect on Water Test)	-	4000	-
6.1.2(PVC Resin)	-	2500	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.1.4(Length)	-	250	-
6.1.1(VCM Content)	-	2500	-
7.2.1.2b(Maximum inner diameter of groove)	-	250	-
13.1(Marking)	-	0	-

24 Sep, 2027

-
Included w.e.f.19.12.2024

7393

Standard Testing and Compliance Private Limited

6178726

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	15% discount to BIS
7.1, 7.2(Charging Procedure for Test Purpose)	-	15000	15% discount to BIS
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	15000	15% discount to BIS
7.3.2("Discharge Performance at -20°C ")	-	20000	15% discount to BIS
7.3.3(High Rate Discharge Performance at 20°C)	-	20000	15% discount to BIS
7.4(Charge (capacity) Retention and Recovery)	-	50000	15% discount to BIS
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	70000	15% discount to BIS
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	70000	15% discount to BIS
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	75000	15% discount to BIS
7.7(Battery Internal Resistance)	-	10000	15% discount to BIS

10 Jul, 2027

-
Included w.e.f.16.12.2024 Exclusion Cl 7.8 (Electrostatic Discharge (ESD))

7394

INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)

7119305

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

Toy

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	--
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	--
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	--
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	--
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	--
4.3.2 - 5.21( Expanding materials)	-	500	--
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	--
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	500	--
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	500	--
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	--
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	--
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	500	--
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	500	--
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	--
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	--
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	--
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	--
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	--
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	--
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	--
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	--
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	--
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	500	--
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	--
4.18.2(b)(Projectile toys-Projectiles)	-	500	--
4.18.2(c)(Projectile toys-Projectiles)	-	500	--
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	--
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	--
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	--
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	--
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	--
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	--
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	--
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	--
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	--
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	--
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	--
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	--
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	--
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	--
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	--
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	--
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	--
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	--
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	--
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	--
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	--
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	--
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	500	--
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	--
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	500	--
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	--
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	--
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	--
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	500	--
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	500	--
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	--
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	--
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	--
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	--
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	--
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	--
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	--
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	--
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	--
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	--
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	--
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	--
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	--
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	--
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	--
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	--
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	500	--
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	--
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	---
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	--
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	---
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	---
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	--
4.7.3 (Wooden toys)	-	500	--

-
-

7395

CIPET, Lucknow

9102534

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

155653 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	500	-
4.1.2(Manufacture)	-	500	-
4.1.3(Manufacture)	-	500	-
4.1.4(Manufacture)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.3(Thickness)	-	500	-
4.4.1(Physical Properties)	-	1100	-
4.4.1(Physical Properties)	-	1100	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	6000	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	1100	-
4.4.3(After heat ageing in autoclave)	-	2500	-
4.4.3(After heat ageing in autoclave)	-	1800	-
4.4.4(Tension Set)	-	1100	-
4.5(pH of Aqueous Extract )	-	750	-
4.4.3 a)(Tensile strength)	-	1100	-
4.4.3 b)(Elongation at break)	-	1100	-
4.1.1(Manufacture)	-	500	-
4.1.2(Manufacture)	-	500	-
4.1.3(Manufacture)	-	500	-
4.1.4(Manufacture)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.2(Dimensions Fig 1 and Table 1)	-	500	-
4.3(Thickness)	-	500	-
4.4.1(Physical Properties)	-	1100	-
4.4.1(Physical Properties)	-	1100	-
4.4.2(After accelerated aging at 70 + 1ºC for 240 h)	-	1100	-
4.4.2(After accelerated aging at 70 + 1ºC for 240 h)	-	1100	-
4.4.3(After heat ageing in autoclave)	-	1100	-
4.4.3(After heat ageing in autoclave)	-	1100	-
4.4.4(Tension Set)	-	1600	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

7396

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

45500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	300	-
Cl 5.2.2(" Height of upper ")	-	300	-
Cl 5.2.3(Heel area)	-	300	-
Cl 5.3.1.1(Construction of whole footwear)	-	300	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2.1(Toe protection - general)	-	800	-
Cl 5.3.2.2(Internal length)	-	300	-
Cl 5.3.2.3(Width of toecap flange)	-	300	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	300	-
Cl 5.3.2.6(Impact resistance)	-	800	-
Cl 5.3.2.7(Compression resistance)	-	500	-
Cl 5.3.3(Leak proofness)	-	800	-
Cl 5.3.4("Specific ergonomic features ")	-	800	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3500	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.3.8(Lead Content ( National Annex A))	-	2000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	300	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	1500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	300	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	300	-
Cl 5.8.2.2(Cleated area)	-	300	-
Cl 5.8.2.3(Cleat height)	-	300	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	800	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	800	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	800	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	800	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	300	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	500	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1500	-
Cl 6.2.4(Energy absorption of seat region)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	500	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	500	-
Cl 6.2.7(Ankle protection)	-	500	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	300	-
Cl 6.2.8.3(Resistance to cutting)	-	500	-
Cl 6.2.9(Scuff cap)	-	500	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1500	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	500	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	300	-
Cl 6.4.3.2(Design of Ladder grip)	-	300	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	300	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	300	-
Cl 7("Marking ")	-	300	-
Cl 7("Marking ")	-	300	-

15 Apr, 2027

-
Included.w.e.f.06.12.2024

7397

BIS, Central Laboratory (CL)

None

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

3525 .5 KW View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-9 (Cl-8 of IS 302-2-15) (PROTECTION AGAINST ACCESS TO LIVE PARTS)	-
Cl-9 (Cl-10 of IS 302-2-15) (POWER INPUT AND CURRENT)	-
Cl-9 (Cl-11 of IS 302-2-15) (HEATING)	-
Cl-9 (Cl-13 of IS 302-2-15) (LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-
Cl-9 (Cl-15 of IS 302-2-15) (MOISTURE RESISTANCE)	-
Cl-9 (Cl-16 of IS 302-2-15) (LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-
Cl-9 (Cl-19 of IS 302-2-15) (ABNORMAL OPERATION)	-
Cl-9 (Cl-20 of IS 302-2-15) (STABILITY AND MECHANICAL HAZARDS)	-
Cl-9 (Cl-21 of IS 302-2-15) (MECHANICAL STRENGTH)	-
Cl-9 (Cl-22 of IS 302-2-15) (CONSTRUCTION)	-
Cl-9 (Cl-23 of IS 302-2-15) (INTERNAL WIRING)	-
Cl-9 (Cl-24 of IS 302-2-15) (COMPONENTS)	-
Cl-9 (Cl-25 of IS 302-2-15) (SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-
Cl-9 (Cl-26 of IS 302-2-15) (TERMINALS FOR EXTERNAL CONDUCTORS)	-
Cl-9 (Cl-27 of IS 302-2-15) (PROVISION FOR EARTHING)	-
Cl-9 (Cl-28 of IS 302-2-15) (SCREWS AND CONNECTIONS)	-
Cl-9 (Cl-29 of IS 302-2-15) (CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-
Cl-9 (Cl-30 of IS 302-2-15) (RESISTANCE TO HEAT AND FIRE)	-
Cl-9 (Cl-31 of IS 302-2-15) (RESISTANCE TO RUSTING)	-
7 (Classification)	-
11 (Overall Dimensions)	-
12 (Mass)	-
13 (Water Capacity)	-
16 (Minimum quantity of water that can be boiled)	-
18 (Thermal Efficiency)	-
20 (Finish)	-
8 (Marking and Instruction)	-

-
Exclusion Cl. 14, Cl.15, Cl.17, Cl.19 and Cl.20.2

7398

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.3(Standard Mark on Conduit)	-	500	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	500	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	500	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1000	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
10.0(Resistance to Heat -Ball presure test)	-	1000	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	500	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	1000	-
9.2(Bending Test At Room Temp)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
7.4(Unifomity of The wall Thickness)	-	1000	-
7.3(Length of conduit)	-	500	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	500	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	500	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	500	-
6.3(Standard Mark on Conduit)	-	500	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	500	-
6.1 - d(Marking)	-	500	-
6.1 - c(Marking)	-	500	-
6.1 - b(Marking)	-	500	-
6.1 - a(Marking)	-	500	-

11 Mar, 2028

-
-

7399

Precision Laboratories LLP, Ahmedabad

7174106

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-
Cl-4.1(Timber)	-	1500	-
Cl-4.2(Adhesive)	-	1500	-
Cl-5.1(Veneers)	-	1500	-
Cl-5.2.1(Glueing)	-	1500	-
Cl -5.2.2(Thickness of Veneers)	-	1500	-
Cl - 5.2.3.1(Joint in Veneers)	-	1500	-
Cl - 5.2.3.2(Edge joints)	-	1500	-
Cl - 5.2.3.3(End joints)	-	1500	-
Cl - 5.2.3.4(Scarf joints)	-	1500	-
Cl - 5.2.4(Grain Direction)	-	1500	-
Cl-5.3(Treatment)	-	1500	-
Cl-5.4(Moisture Content)	-	1500	-
Cl-6.1(Dimensions (length))	-	1500	-
Cl-6.2(Thickness)	-	1500	-
Cl-6.3(Squareness)	-	1500	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1500	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1500	-
Cl-9.5.2(Water Resistance Test)	-	1500	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	1500	-
Cl-9.11(Formaldehyde Content Test)	-	1500	-
Cl-9.4.2(Adhesion of Plies)	-	1500	-
5.1.1(Defects in veneers)	-	1500	-
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1500	-

31 Oct, 2026

-
Included w.e.f 04.03.2025 Exclusion: Cl-9.12 (Steady-State Formaldehyde Emission Test)

7400

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

GRADE BWP/MR,TYPE BN/BD/PD/PN,Size 2440 x1220x 50mm Max

25400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	200	-
11.1(Dimensions - Width)	-	200	-
11.1(Dimensions - Thickness)	-	200	-
11.1(Dimensions - Variation in thickness)	-	100	-
11.1(Dimensions - Squareness)	-	200	-
11.12(End immersion test)	-	300	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	0	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	0	-
9.2(WORKMANSHIP AND FINISH)	-	0	-
9.3(WORKMANSHIP AND FINISH)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	900	-
11.2(General Flatness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1000	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	2000	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	1500	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7.1(Shock Resistance Test)	-	2000	-
11.7.2(Shock Resistance Test)	-	0	-
11.8(Buckling Test)	-	1500	-
11.8(Buckling Test)	-	0	-
11.8(Buckling Test)	-	0	-
11.9.2(Slamming Test)	-	1500	-
11.9.3(Slamming Test)	-	0	-
11.10(Misuse Test)	-	800	-
11.11(Varying Humidity Test)	-	4000	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	3000	-
11.13(Knife Test)	-	1000	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	3500	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	0	EXTRA CHARGES FOR CL.6.1.3 RS 1000
Clause 6.2.1(Plywood)	-	0	EXTRA CHARGES FOR CL.6.2.1 IS 303 RS 4000 & IS 710 RS 1200
Clause 6.2.2(Decorative plywood)	-	0	EXTRA CHARGES FOR CL.6.2.2 RS 4000
Clause 6.3(Cross-Bands)	-	0	EXTRA CHARGES FOR CL.6.3 RS 1500
Clause 6.4.1(Commercial Face Veneers)	-	0	EXTRA CHARGES FOR CL.6.4.1 RS 1500
Clause 6.4.2(Decorative Face Veneers)	-	0	EXTRA CHARGES FOR CL.6.4.2 RS 1500
Clause 6.6.1(Adhesives)	-	8000	EXTRA CHARGES FOR CL.6.61 BWP- RS 8000 & MR RS 7000
Clause 6.7(Particle Board)	-	0	EXTRA CHARGES FOR CL.6.7 RS 1200(SWELLING IN THICKNESS DUE TO GENERAL ABSORPTION)
Clause 6.8(Medium density fibre board)	-	0	EXTRA CHARGES FOR CL.6.8 RS 1200(SWELLING IN THICKNESS DUE TO GENERAL ABSORPTION)
Clause 6.9(Alternative Materials)	-	0	EXTRA CHARGES FOR CL6.9 FOR IS 710-12600, IS 303 -4000
Clause 7.1(Blockboard Core)	-	0	EXTRA CHARGES FOR CL.7.1 -1500
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	200	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	0	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	0	-
Clause 11.2(General Flatness Test)	-	0	-
Clause 11.3(Local Planeness Test)	-	0	-
Clause 11.4(Impact Indentation Test)	-	0	-
Clause 11.5(Flexure Test)	-	0	-
Clause 11.6(Edge Loading Test)	-	0	-
Clause 11.7(Shock Resistance Test)	-	0	-
Clause 11.8(Buckling Resistance Test)	-	0	-
Clause 11.9(Slamming Test)	-	0	-
Clause 11.10(Misuse Test)	-	0	-
Clause 11.11(Varying Humidity Test)	-	0	-
Clause 11.12(End Immersion Test)	-	0	-
Clause 11.13(Knife Test)	-	0	-
Clause 11.14(Glue Adhesion Test)	-	0	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	0	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	0	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	0	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	0	-
11.2(General Flatness Test)	-	0	-
11.3(Local Planeness Test)	-	0	-
11.4(Impact Indentation Test)	-	0	-
11.5(Flexure Test)	-	0	-
11.6(Edge Loading Test)	-	0	-
11.7(Shock Resistance Test)	-	0	-
11.9(Slamming Test)	-	0	-
11.1(Misuse Test)	-	0	-
11.11(Varying Humidity Test)	-	0	-
11.12(End Immersion Test)	-	0	-
11.13(Knife Test)	-	0	-
11.14(Glue Adhesion Test)	-	0	-
11.15(Screw Withdrawal Resistance Test)	-	0	-
14(Marking )	-	100	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
11.8(Buckling Resistance Test)	-	0	-

17 Mar, 2028

-
-

7401

CIPET, Hyderabad

6111634

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

66725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	750	25 % DISCOUNT FOR BIS
5(Dimensions of pipe - ii) Wall thickness minimum)	-	750	25 % DISCOUNT FOR BIS
6(Visual Appearance)	-	300	25 % DISCOUNT FOR BIS
7.1(Hydraulic Characteristics - Quality test)	-	4800	25 % DISCOUNT FOR BIS
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
7.2(Reversion Test)	-	700	25 % DISCOUNT FOR BIS
7.3(Tensile Test- i) Tensile Strength)	-	1100	25 % DISCOUNT FOR BIS
7.3(Tensile Test - ii)Elongation at Break)	-	1100	25 % DISCOUNT FOR BIS
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	25 % DISCOUNT FOR BIS
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
7.5(Density)	-	500	25 % DISCOUNT FOR BIS
7.6(Melt Flow Rate)	-	1100	25 % DISCOUNT FOR BIS
4.2(Carbon black- a)carbon content)	-	925	25 % DISCOUNT FOR BIS
4.2(Carbon black- b) Dispersion of carbon black)	-	700	25 % DISCOUNT FOR BIS
5.1.2(Ovality)	-	750	25 % DISCOUNT FOR BIS
4.3(Anti-oxidant)	-	700	25 % DISCOUNT FOR BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % DISCOUNT FOR BIS
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	25 % DISCOUNT FOR BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	25 % DISCOUNT FOR BIS
3(CLASSIFICATION OF PIPES)	-	500	25 % DISCOUNT FOR BIS
4.1(Quick Coupled Male and Female Couplers)	-	500	25 % DISCOUNT FOR BIS
4.1.3(Workmanship and appearance)	-	300	25 % DISCOUNT FOR BIS
4.1.4(Holding attachments for coupler parts)	-	2625	25 % DISCOUNT FOR BIS
6.1.3(Weldability Test- a) Quality test)	-	4800	25 % DISCOUNT FOR BIS
6.1.3(Weldability Test- b) Acceptance test)	-	1600	25 % DISCOUNT FOR BIS
3(QUICK COUPLED PIPES)	-	300	25 % DISCOUNT FOR BIS
4(QUICK COUPLED FITTINGS)	-	300	25 % DISCOUNT FOR BIS
4.1 (a)(Quick Coupled Male and Female Couplers)	-	300	25 % DISCOUNT FOR BIS
4.1 (b)(HDPE couplers —)	-	300	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	1050	25 % DISCOUNT FOR BIS
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	1050	25 % DISCOUNT FOR BIS
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	375	25 % DISCOUNT FOR BIS
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4575	25 % DISCOUNT FOR BIS
10(Marking)	-	300	25 % DISCOUNT FOR BIS

23 Feb, 2027

-
Included w.e.f.19.12.2024

7402

Astute Labs Pvt Ltd, Pune

7174321

IS/IEC 80601 : Part 2 : Sec 30 (2018)

Medical electrical equipment: Part 2 - 30 particular requirements for basic safety and essential performance of automated non - Invasive sphygmomanometers

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	30000	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	30000	-
210(Requirements for the development of physiologic closed-loop controllers)	-	30000	-
206(Usability)	-	30000	-
201.106(Clinical accuracy)	-	30000	-
201.105(Automatic cycling modes)	-	30000	-
201.103(Maximum inflating time)	-	30000	-
201.102(Connection tubing and CUFF connectors)	-	30000	-
201.101(Requirements for CUFFS)	-	30000	-
201.16(ME SYSTEMS)	-	20000	-
201.15(Construction of ME EQUIPMENT)	-	30000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	20000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	30000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	30000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	40000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	40000	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	30000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	30000	-
201.5(General requirements for testing ME EQUIPMENT)	-	30000	-
201.4(General)	-	20000	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
210(Requirements for the development of physiologic closed-loop controllers)	-	0	-
206(Usability)	-	0	-
201.106(Clinical accuracy)	-	0	-
201.105(Automatic cycling modes)	-	0	-
201.103(Maximum inflating time)	-	0	-
201.102(Connection tubing and CUFF connectors)	-	0	-
201.101(Requirements for CUFFS)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.5(General requirements for testing ME EQUIPMENT)	-	0	-
201.4(General)	-	0	-
212(Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment)	-	0	-
211(Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment)	-	0	-
210(Requirements for the development of physiologic closed-loop controllers)	-	0	-
206(Usability)	-	0	-
201.106(Clinical accuracy)	-	0	-
201.105(Automatic cycling modes)	-	0	-
201.103(Maximum inflating time)	-	0	-
201.102(Connection tubing and CUFF connectors)	-	0	-
201.101(Requirements for CUFFS)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.9(Protection against mechanical HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.5(General requirements for testing ME EQUIPMENT)	-	0	-
201.4(General)	-	0	-

05 Nov, 2026

-
Included w.e.f.17.03.2025 Exclusion CL 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) CL 202.8 (Electromagnetic IMMUNITY requirements for ME EQUIPMENT and ME SYSTEMS) CL 202 (Electromagnetic disturbances – Requirements and tests)

7403

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 18 (2014)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 18 endoscopic equipment

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	40000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	40000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	40000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	40000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	40000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	60000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	60000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	30000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	30000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.1(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2026

-
Included w.e.f.17.03.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS) Cl 202 (Electromagnetic compatibility – Requirements and tests)

7404

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 21 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 21 infant radiant warmer

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	50000	-
201.6(Classification Of ME equipment and ME systems)	-	50000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	50000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

7405

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 19 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 19 baby incubator

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	50000	-
201.6(Classification Of ME equipment and ME systems)	-	50000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	50000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	60000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	60000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	50000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

7406

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

All sizes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	5250	(Test charges 5250 ) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4. Stress relief test = 700
2.2(Manufacture)	-	0	-
2.2.2(diameter of the socket of cap)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2(diameter of the socket of cap)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0.02	-

-
Included w.e.f.04.12.2024

7407

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : PART 2 : SEC 4 (2018)

Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 4 cardiac defibrillators (First Revision)

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	60000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	60000	-
201.6(Classification Of ME equipment and ME systems)	-	60000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	60000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	80000	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	80000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	60000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	80000	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	80000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	25000	-
201.15(Construction of ME EQUIPMENT)	-	80000	-
201.16(ME SYSTEMS)	-	25000	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-
201.4(General requirements)	-	0	-
201.5(General requirements for testing of ME EQUIPMENT)	-	0	-
201.6(Classification Of ME equipment and ME systems)	-	0	-
201.7(ME EQUIPMENT identification, marking and documents)	-	0	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	0	-
201.9(Protection against MECAHNICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	0	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	0	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	0	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	0	-
201.13(HAZARDOUS SITUATIONS and fault conditions)	-	0	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	0	-
201.15(Construction of ME EQUIPMENT)	-	0	-
201.16(ME SYSTEMS)	-	0	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

7408

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

All Sizes

6563 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
2.1(General)	-	5250	(Test charges 5250 ) Discount of 25 % is applicable on total test charges only for BIS. 1. Opacity = 700 2. HPT = 850 3. Effect on water = 3000 4.Stress relief test = 700
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
2.2.3(Socket length)	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-
6.1.1(VCM Content Test)	-	3000	Discount of 25 % is applicable on total test charges only for BIS.
2.2.2 table 1(Laying length)	-	0.01	-

-
Included w.e.f.03.12.2024

7409

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	0	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Tensile Strength, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	1000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	500	-
8.5(Erichsen Cupping Test)	-	500	-
10.1(Thickness, mm)	-	100	-
10.2(width, mm)	-	100	-
10.3(Length, mm)	-	100	-
10.4(Flatness,mm)	-	100	-
10.5(Camber, mm)	-	100	-
11(Surface Finish)	-	100	-
Cl . 6 .0(Freedom from defect)	-	100	-
13(Marking)	-	100	-

19 Apr, 2028

-
-

7410

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grade

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	6000	-
4.1(Sulphur and phosphorous)	-	6000	-
4.1(CE)	-	6000	-
4.1( Nitrogen%)	-	6000	-
4.1(Ni)	-	6000	-
4.1(Mo)	-	6000	-
4.1(Cr)	-	6000	-
4.1( Ti)	-	6000	-
4.1(V)	-	6000	-
4.1( Nb)	-	6000	-
4.1( Aluminium %)	-	6000	-
4.1( Copper %)	-	6000	-
4.1(Silicon %)	-	6000	-
4.1(Sulphur %)	-	6000	-
4.1(Phosphorus %)	-	6000	-
4.1(Manganese %)	-	6000	-
4.1(Carbon %)	-	6000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	6500	-
Cl. 9.3, Table 4(Bend Test )	-	6500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	6500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	6500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	6500	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	6500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	6500	-
Cl. 6.1(Nominal Size)	-	6500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	6000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	6000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	6000	-
8.18.1 Table 3(Total elongation at maximum force)	-	6500	-
4.2(Niobium (Nb))	-	6500	-
4.2(Boron (B))	-	6500	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	6500	-
Cl. 8.1 Table 3(Maximum Extension)	-	6500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	6500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	6500	-
Cl. 4.3(Visual Inspection.)	-	6500	-
Clause 9.4(Rebend Test)	-	6500	-
Clause 6.3(Effective Cross-sectional Area)	-	6500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	6500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	6500	-
7.1(Specified length)	-	6500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	6500	-
9.5(Retest)	-	6500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	6000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	6000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	6000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	6000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	6000	-
8.18.1 Table 3(Total elongation at maximum force)	-	6500	-
4.2(Niobium (Nb))	-	6000	-
4.2(Boron (B))	-	6000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	6500	-
Cl. 8.1 Table 3(Maximum Extension)	-	6500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	6500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	6500	-
Cl. 4.3(Visual Inspection.)	-	6500	-
Clause 9.4(Rebend Test)	-	6500	-
Clause 6.3(Effective Cross-sectional Area)	-	6500	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 6.1(Length, Width & Thickness)	-	6500	-
Cl 7.2(Weight)	-	6500	-
Cl 8.1(UTM)	-	6500	-
Cl 9.3(Load In One Direction)	-	6500	-
Cl 9.4(Load In Other Direction From Bend)	-	6500	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	6500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	6500	-
7.1(Specified length)	-	6500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	6500	-
9.5(Retest)	-	6500	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	6000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	6000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	6000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	6500	-
Cl. 5.2(Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	6500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	6500	-
13(Identification and marking)	-	0	-
9.1(Preparation of test sample)	-	0	-
12(Inspection)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl 5(Deformations and Surface Characteristics)	-	6500	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	0	-
8.18.1 Table 3(Total elongation at maximum force)	-	0	-
4.2(Niobium (Nb))	-	0	-
4.2(Boron (B))	-	0	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	0	-
Cl. 8.1 Table 3(Maximum Extension)	-	0	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	0	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	0	-
Cl. 4.3(Visual Inspection.)	-	0	-
Clause 9.4(Rebend Test)	-	0	-
Clause 6.3(Effective Cross-sectional Area)	-	0	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	0	-
Cl 9.3(Load In One Direction)	-	0	-
Cl 8.1(UTM)	-	0	-
Cl 7.2(Weight)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	0	-
Cl 7.2(Weight)	-	0	-
Cl 8.1(UTM)	-	0	-
Cl 9.3(Load In One Direction)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	0	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	0	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	0	-
7.1(Specified length)	-	0	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	0	-
9.5(Retest)	-	0	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	0	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	0	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl. 5.2(Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	0	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	-
13(Identification and marking)	-	0	-
9.1(Preparation of test sample)	-	0	-
12(Inspection)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-

-
Included w.e.f.23.07.2025 Exclusion:- 5.7 (PullOut (Bond Test))

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number