BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15623 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7411

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Performance Requirements)	-	1200	-
8.5(Performance Requirements)	-	600	-
8.4(Performance Requirements)	-	1200	-
8.3(Performance Requirements)	-	1200	-
8.2(Performance Requirements)	-	600	-
8.1(Performance Requirements)	-	2000	-
7.1(Construction)	-	200	-
6.1(Construction)	-	300	-
5.5(Construction)	-	300	-
5.4(Construction)	-	500	-
5.3(Construction)	-	300	-
5.2(Construction)	-	300	-
5.1(Construction)	-	800	-
4.1(Sizes)	-	200	-
3.3(Material)	-	200	-
3.2(Material)	-	200	-
3.1(Material)	-	0	-

21 Jul, 2028

-
-

7412

Amit Test and Calibration Centre (8172006)

8172006

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	200	-
4.1.1(CONDUCTOR)	-	200	-
5(INSULATION)	-	200	-
6(SCREENING)	-	200	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	200	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	200	-
7(FILLERS AND INNER SHEATH)	-	200	-
8.1(ARMOURING)	-	200	-
8.2(ARMOURING)	-	200	-
9(OUTER SHEATH )	-	200	-
10.1(CONDUCTOR)	-	200	-
10.2(CONDUCTOR)	-	200	-
11(CONDUCTOR SCREENING)	-	200	-
12.1(INSULATION)	-	200	-
12.2(INSULATION : Thickness of Insulation)	-	1000	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	500	-
12.4(Eccentricity and Ovality)	-	1000	-
12.5(INSULATION : Application of Insulation)	-	500	-
13.1(INSULATION SCREENING)	-	200	-
13.2(INSULATION SCREENING)	-	200	-
13.3(INSULATION SCREENING)	-	200	-
13.4(INSULATION SCREENING)	-	200	-
14.1(CORE IDENTIFICATION)	-	200	-
14.1.1(CORE IDENTIFICATION)	-	200	-
15.1(LAVING UP OF CORES)	-	200	-
16.1(INNER SHEATH (COMMON COVERING))	-	200	-
16.2(INNER SHEATH (COMMON COVERING))	-	200	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	200	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	1000	-
17.1(ARMOURING : Application )	-	200	-
17.1.1(ARMOURING )	-	200	-
17.1.2(ARMOURING )	-	200	-
17.1.3(ARMOURING )	-	200	-
17.2.1(ARMOURING : Type of armour )	-	200	-
17.2(ARMOURING : Coverage )	-	500	-
17.3(ARMOURING : Dimension )	-	1000	-
17.4(ARMOURING : Joints)	-	500	-
16.4(ARMOURING : Resistance)	-	2500	-
18.1(OUTER SHEATH)	-	500	-
18.2(OUTER SHEATH: Colour)	-	500	-
18.3(Thicknes of outer sheath : average )	-	1000	-
18.3(Thicknes of outer sheath : minimum )	-	1000	-
19.1 i) a)(Annealing test (for copper))	-	1000	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	1000	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	1000	-
19.1 i) c)(Wrapping test ( for aluminium))	-	1000	-
19.1 i) d)(Resistance test - Main conductor )	-	5000	-
19.1 i) d)(Resistance test - Neutral conductor )	-	5000	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	2500	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	2500	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
19.1 iii) c)(Degree of cross linking )	-	1000	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	2500	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	2500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	1500	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1500	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	7000	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	2500	-
19.1 v) b)(Volume resistivity)	-	5000	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	1500	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	-
19.1 vi) d)(Sheath : Hot deformation)	-	5000	-
19.1 vi) e)(Loss of massIn air oven)	-	5000	-
19.1 vi) f)(Sheath : Heat shock test)	-	2500	-
19.1 vi) g)(Sheath : Thermalstability)	-	3000	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	3500	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	5000	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	5000	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	3500	-
20.2(Partial discharge test)	-	45000	-
20.3(Bending test)	-	15000	-
20.4(Dielectric power factor test : As a function of voltage)	-	30000	-
20.4(Dielectric power factor test : As a function of temperature)	-	30000	-
20.5(Heating Cycle Test)	-	30000	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	45000	-
20.7(High voltage test)	-	25000	-
20.8(Flammability test)	-	5000	-
20.1(Oxygen Index Test)	-	7000	-
20.11(Flame Retardance Test on Single Cables)	-	3000	-
20.12(Flame Retardance Test on Bunched Cables)	-	15000	-
20.13(Test for Halogen Acid Gas Evolution)	-	7000	-
20.14( Test for Smoke Density)	-	25000	-
20.15(Temperature Index)	-	7000	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	200	-
21.2(IDENTIFICATION : Cable Identification)	-	200	-
21.3(IDENTIFICATION : Cable Code)	-	200	-
20.3 (a)(Partial discharge test (Bending test))	-	45000	-
20.5 (a)(PD test (heating cycle test))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	30000	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	30000	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	30000	-
Cl. 8(Conductor)	-	200	-
Cl. 8(Conductor)	-	200	-
Cl. 8(Conductor)	-	200	-
Cl.8 & 17(Armouring)	-	200	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	2500	-
Cl.8 & 17(Armouring : Tensile Strength)	-	1500	-
Cl.8 & 17(Armouring : Elongation)	-	1500	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	1500	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	1500	-
Cl.8 & 17(Armouring : Application)	-	200	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	1500	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	1500	-
Cl.8 & 17(Armouring : Resistivity Test)	-	2500	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	3500	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	2500	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	2500	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
17.2(ARMOURING : Type of armour )	-	200	-
4.1(CONDUCTOR)	-	-	-
4.1.1(CONDUCTOR)	-	-	-
5(INSULATION)	-	-	-
6(SCREENING)	-	-	-
6.1.1(SCREENING : - Non-metallic — Semiconducting Compound)	-	-	-
6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-	-	-
7(FILLERS AND INNER SHEATH)	-	-	-
8.1(ARMOURING)	-	-	-
8.2(ARMOURING)	-	-	-
9(OUTER SHEATH )	-	-	-
10.1(CONDUCTOR)	-	-	-
10.2(CONDUCTOR)	-	-	-
11(CONDUCTOR SCREENING)	-	-	-
12.1(INSULATION)	-	-	-
12.2(INSULATION : Thickness of Insulation)	-	-	-
12.3(INSULATION : Tolerance on Thickness of Insulation)	-	-	-
12.4(Eccentricity and Ovality)	-	-	-
12.5(INSULATION : Application of Insulation)	-	-	-
13.1(INSULATION SCREENING)	-	-	-
13.2(INSULATION SCREENING)	-	-	-
13.3(INSULATION SCREENING)	-	-	-
13.4(INSULATION SCREENING)	-	-	-
14.1(CORE IDENTIFICATION)	-	-	-
14.1.1(CORE IDENTIFICATION)	-	-	-
15.1(LAVING UP OF CORES)	-	-	-
16.1(INNER SHEATH (COMMON COVERING))	-	-	-
16.2(INNER SHEATH (COMMON COVERING))	-	-	-
16.2.1(INNER SHEATH (COMMON COVERING))	-	-	-
16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	-	-
16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	-	-
17.1(ARMOURING : Application )	-	-	-
17.1.1(ARMOURING )	-	-	-
17.1.2(ARMOURING )	-	-	-
17.1.3(ARMOURING )	-	-	-
17.2.1(ARMOURING : Type of armour )	-	-	-
17.2(ARMOURING : Coverage )	-	-	-
17.3(ARMOURING : Dimension )	-	-	-
17.4(ARMOURING : Joints)	-	-	-
16.4(ARMOURING : Resistance)	-	-	-
18.1(OUTER SHEATH)	-	-	-
18.2(OUTER SHEATH: Colour)	-	-	-
18.3(Thicknes of outer sheath : average )	-	-	-
18.3(Thicknes of outer sheath : minimum )	-	-	-
19.1 i) a)(Annealing test (for copper))	-	-	-
19.1 i) b)(Tensile test (for aluminium) - Before stranding )	-	-	-
19.1 i) b)(Tensile test (for aluminium) - After stranding )	-	-	-
19.1 i) c)(Wrapping test ( for aluminium))	-	-	-
19.1 i) d)(Resistance test - Main conductor )	-	-	-
19.1 i) d)(Resistance test - Neutral conductor )	-	-	-
19.1 iii) a)(Phyaical tests for insulation : Tensile Test)	-	-	-
19.1 iii) a)(Phyaical tests for insulation : Elongation )	-	-	-
19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-	-
19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-	-
19.1 iii) c)(Degree of cross linking )	-	-	-
19.1 iii) d)(Phyaical tests for insulation : Hot set )	-	-	-
19.1 iii) d)(Phyaical tests for insulation : Permanent set )	-	-	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage )	-	-	-
19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	-	-
19.1 iii) f)(Insulation: Waterabsorption(gravimetric))	-	-	-
19.1 v) a)(Test for strippability of semiconducting strippable insulation screen (when applicable))	-	-	-
19.1 v) b)(Volume resistivity)	-	-	-
19.1 vi) a)(Physical tests for outer sheath : Tensile stregth )	-	-	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	-	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage )	-	-	-
19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-	-
19.1 vi) d)(Sheath : Hot deformation)	-	-	-
19.1 vi) e)(Loss of massIn air oven)	-	-	-
19.1 vi) f)(Sheath : Heat shock test)	-	-	-
19.1 vi) g)(Sheath : Thermalstability)	-	-	-
19.1 vi) h)(Carbon black content of polythene sheath )	-	-	-
19.1 vii)(Thermal ageing test for complete cable - Tensile stregth )	-	-	-
19.1 vii)(Thermal ageing test for complete cable- Elogation )	-	-	-
19.1 vii)(Thermal ageing test for complete cable- Resistivity )	-	-	-
19.1 xi)(Insulation resistance test : volume resistivity )	-	-	-
20.2(Partial discharge test)	-	-	-
20.3(Bending test)	-	-	-
20.4(Dielectric power factor test : As a function of voltage)	-	-	-
20.4(Dielectric power factor test : As a function of temperature)	-	-	-
20.5(Heating Cycle Test)	-	-	-
20.6(Impulse withstand test (Rated voltage, kV 3.8/6.6 Impulse voltage, kV 60))	-	-	-
20.7(High voltage test)	-	-	-
20.8(Flammability test)	-	-	-
20.1(Oxygen Index Test)	-	-	-
20.11(Flame Retardance Test on Single Cables)	-	-	-
20.12(Flame Retardance Test on Bunched Cables)	-	-	-
20.13(Test for Halogen Acid Gas Evolution)	-	-	-
20.14( Test for Smoke Density)	-	-	-
20.15(Temperature Index)	-	-	-
21.1(IDENTIFICATION : Manufacturer's Identification)	-	-	-
21.2(IDENTIFICATION : Cable Identification)	-	-	-
21.3(IDENTIFICATION : Cable Code)	-	-	-
20.3 (a)(Partial discharge test (Bending test))	-	-	-
20.5 (a)(PD test (heating cycle test))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 6.35/11 Impulse voltage, kV 75))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 11/11 Impulse voltage, kV 95))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 12.7/22 Impulse voltage, kV 125))	-	-	-
20.6(Impulse Withstand Test (Rated voltage, kV 19/33 Impulse voltage, kV 170))	-	-	-
Cl-20.6(Impulse Withstand Test (Rated voltage, kv 33/33 Impulse voltage , kv 250))	-	-	-
Cl. 8(Conductor)	-	-	-
Cl. 8(Conductor)	-	-	-
Cl. 8(Conductor)	-	-	-
Cl.8 & 17(Armouring)	-	-	-
Cl. 17.5(Armouring : Resistance of Armour,)	-	-	-
Cl.8 & 17(Armouring : Tensile Strength)	-	-	-
Cl.8 & 17(Armouring : Elongation)	-	-	-
Cl.8 & 17(Armouring : Torsion Test (For Round Steel Wire Only))	-	-	-
Cl.8 & 17(Armouring: Winding Test ( For formed steel wire only))	-	-	-
Cl.8 & 17(Armouring : Application)	-	-	-
Cl.8 & 17(Armouring : Uniformity of Zinc Coating)	-	-	-
Cl.8 & 17(Armouring: Mass of Zinc Coating)	-	-	-
Cl.8 & 17(Armouring : Resistivity Test)	-	-	-
Cl.8 & 17(Armouring: Cold Impact Test (For outer Sheath))	-	-	-
Cl. 13.5.1 and Table 7(Armouring: Resistance Test for Armouring (Other than Mining Cables))	-	-	-
19.1 vi) a)(Physical tests for outer sheath : Elongation )	-	-	-
19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	-	-
17.2(ARMOURING : Type of armour )	-	-	-

16 Apr, 2029

-
Included w.e.f.05.03.2025

7413

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 18340 (2023)

Vinyl Sulphone - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	500	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	5000	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	0	Testing charges already mentioned above at Cl-3.2, Table-1 (i) Assay (by nitrite value) i.e. Rs. 5000/-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	2500	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	2000	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	5000	-
Cl-4.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

7414

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 11557 (1986)

Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	1000	-
2.2-Table 1-(i)(Matter insoluble in dilute sodium carbonate)	-	2000	-
2.2-Table 1-(ii)(Assay ( on dry basis ), percent by mass)	-	5000	-
2.2-Table 1-(iii)(Amide G. acid, percent by masss)	-	5000	-
3.1(Packing)	-	0	NA
3.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

7415

QA TESTING LABORATORIES PRIVATE LIMITED, NOIDA

8169906

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE 63,PE 80,PE 100

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.9 table-6(Elongation at Break)	-	600	Facility Available
8.4( Melt Flow Rate)	-	500	Facility Available
Cl 8.3(Carbon Black Content)	-	500	Facility Available
Cl 8.3(Carbon Black Dispersion)	-	600	Facility Available
8.2(Longitudinal Reversion Test)	-	600	Facility Available
7.1(Visual Appearance)	-	500	Facility Available
Clause 8.6(Overall migration (surface of material))	-	500	Facility Available
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	600	Facility Available
8.5 (Oxidation Induction Time)	-	600	Facility Available
6.2.1(6.1.1 Identification Stripes)	-	500	Facility Available
Clause 7.1(Visual Apperance)	-	400	Facility Available
Cl. 8.3(Carbon Black Content)	-	300	Facility Available
Cl. 8.3(Carbon Black Dispersion)	-	300	Facility Available
Clause 8.6(Overall migration (stimulate))	-	500	Facility Available
8.6(Overall migration)	-	500	Facility Available
Clause 8.3(Carbon Black Dispersion)	-	500	Facility Available
Clause 8.3(Carbon Black content)	-	500	Facility Available
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
7.1(Visual Appearance)	-	500	-
Clause 8.6(Overall migration (surface of material))	-	400	-
Clause 7.1(Visual Apperance)	-	400	-
Cl. 8.3(Carbon Black Content)	-	400	-
Cl. 8.3(Carbon Black Dispersion)	-	400	-
Clause 8.6(Overall migration (stimulate))	-	400	-
Clause 8.3(Carbon Black Dispersion)	-	400	-
Clause 8.3(Carbon Black content)	-	400	-
Cl 8.3(Carbon Black Content)	-	500	-
Cl 8.3(Carbon Black Dispersion)	-	500	-
7.1(Visual Appearance)	-	500	-
Clause 8.6(Overall migration (surface of material))	-	500	-
Clause 7.1(Visual Apperance)	-	500	-
Cl. 8.3(Carbon Black Content)	-	500	-
Cl. 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.6(Overall migration (stimulate))	-	500	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 8.3(Carbon Black content)	-	500	-

05 Apr, 2028

-
Included w.e.f.05.05.2025 8.8 (Tensile Strength for Butt-fusion) 7.3 (Coiling)

7416

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 12640 : Part 1 (2016)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)

RCCB

1545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.1(General)	-	500	For DP = 500, FP = 500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.2(Mechanism)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.3(Indelibility of marking)	-	1000	For DP = 1000, FP = 1000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 (Creepage distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3 i)(Clearance )	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.15(Trip-free mechanism)	-	3500	For DP = 2500, FP = 3500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	For DP = 3000, FP = 5000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.5(Test of reliability of terminals for external conductors)	-	5500	For DP = 3500, FP = 5500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.6(Protection against electric shock)	-	4000	For DP = 2000, FP = 4000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.13(Test of resistance to heat)	-	2500	For DP = 2000, FP = 2500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	For DP = 1000, FP = 1500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	For DP = 15000, FP = 15000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.2 (Insulation resistance of main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.1(Rated impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.8(Test of Temperature rise)	-	18000	For DP = 15000, FP = 18000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.2(Testing with temperature of 40)	-	38000	For DP = 30000, FP = 38000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.23(Verification of ageing of electronic components )	-	25500	For DP = 23000, FP = 25500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	For DP = 49000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.12.1(Verification of resistance to mechanical shock)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	For DP = 9000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.22.1(Climatic test)	-	90000	For DP = 90000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	For DP = 12000, FP = 16000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.25(Resistance to rusting)	-	3000	For DP = 2000, FP = 3000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.14(Resistance to abnormal heat and to fire)	-	20000	For DP = 15000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	For DP = 10000, FP = 12000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.3(Dielectric strength of the main circuit)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	For DP = 5000, FP = 7500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	For DP = 11000, FP = 13500, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.5(Secondary circuit of detection transformers)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	For DP = 10000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.10(Mechanical and electrical endurance)	-	120000	For DP = 80000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.9(Residual operating characteristics)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.17(Behaviour in the case of failure of the line voltage)	-	8000	For DP = 6000, FP = 8000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.21(DC components)	-	11000	For DP = 8000, FP = 11000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	For DP = 60000, FP = 80000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
(9.11.2.4 c)(Coordination at IΔc)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.11.2.2(Performance at Im)	-	75000	For DP = 60000, FP = 75000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	For DP = 60000, FP = 60000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	For DP = 120000, FP = 120000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	For DP = 60000, FP = 90000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	For DP = 90000, FP = 135000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	For DP = 20000, FP = 20000, Total 12,20,000 (For3 samples of DP) & 15,45,000 (For3 samples of FP),
6(Marking)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.1(General)	-	500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.2(Mechanism)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.3(Indelibility of marking)	-	1000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
8.1.3 (Creepage distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
8.1.3 i)(Clearance )	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.15(Trip-free mechanism)	-	3500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2500 FP-3500
9.4(Test of reliability of screws, current carrying parts and connections )	-	5000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of terminals for external conductors)	-	5500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	4000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-4000
9.13(Test of resistance to heat)	-	2500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-2500
8.1.3(Clearances and creepage distances (internal parts) Clearances distances)	-	1500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Dielectric Properties : Resistance to humidity)	-	15000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.2 (Insulation resistance of main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(Rated impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-11000 FP-13500
9.8(Test of Temperature rise)	-	18000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Testing with temperature of 40)	-	38000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-30000 FP-38000
9.23(Verification of ageing of electronic components )	-	25500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-23000 FP-25500
9.11.2.3(VERIFICATION OF PERFORMANCE AT Im)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-49000 FP-60000
9.16 a)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 b)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.16 c)(Verification of the operation of the test device at the limits of rated voltage )	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-2000 FP-3000
9.12.1(Verification of resistance to mechanical shock)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.18.1(Verification of the limiting value of overcurrent in case of a load through an RCCB with two current paths)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-9000 FP-11000
9.11.2.4 (Verification of the coordination between the RCCB and the SCPD)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-60000 FP-75000
9.22.1(Climatic test)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.19.1( Verification of behaviour of RCCBs in case of current surges caused by impulse voltages (Current surge test for all RCCBs (0,5 µs/100 kHz ring wave test)))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.19.2(Verification of behaviour at surge currents up to 3000A (8/20 s surge current test))	-	16000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP) DP-12000 FP-16000
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.14(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	12000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.3(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.10(Mechanical and electrical endurance)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.9(Residual operating characteristics)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.17(Behaviour in the case of failure of the line voltage)	-	8000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.21(DC components)	-	11000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	80000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
(9.11.2.4 c)(Coordination at IΔc)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.11.2.2(Performance at Im)	-	75000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1220000 (For3 samples of DP) & 1545000 (For3 samples of FP)

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

7417

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 12640 : Part 2 (2016)

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

RCBO

1775000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3(Clearances and creepage distances (internal parts))	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-1500
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-15000
9.7.2(Insulation resistance of main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.3 a)(Dielectric strength of the main circuit)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.6(Capability of control circuits connected to the main circuit in respect of withstanding high d.c. voltages due to insulation measurements )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.8(Test of temperature-rise )	-	18000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-18000
9.22.2(Test with temperature of 40 ºC)	-	38000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-30000 FP-38000
9.12.11.2(PERFORMANCE AT REDUCED SHORT-CIRCUIT CURRENTS)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-70000 FP-90000
9.12.12.1(VERIFICATION OF THE RCBO AFTER SHORT-CIRCUIT TEST : DIELECTRIC STRENGTH TEST)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.9.1.2(Verification of the operating characteristic under residual current conditions)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.16(Verification of the operation of the test device at the limits of rated voltage )	-	4000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-4000
9.13.1(Verification of resistance to mechanical shock )	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-9000 FP-11000
9.12.11.3(SHORT-CIRCUIT PERFORMANCE AT 1500 A)	-	139000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-101000 FP-139000
9.12.11.4(TEST AT SERVICE SHORT-CIRCUIT CAPACITY (Ics)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.22.1(Reliability (Climatic test))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-90000
9.19.1(Current surge test for all RCBOs (0,5 µs/100 kHz ring wave test))	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
6, 9.3(Indelibility of marking)	-	1500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#6 - DP=500, FP=500 Cl.#9.3, DP=1000, FP=1000
8.1.2 , 9.11(Trip-free mechanism)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) Cl.#8.1.2 - DP=800, FP=1500 Cl.#9.3, DP=2100, FP=3500
9.4(Reliability of screws, current-carrying parts and connections)	-	5000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3000 FP-5000
9.5(Test of reliability of screw-type terminals for external)	-	5500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-3500 FP-5500
9.6(Protection against electric shock)	-	3200	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3200
9.14(Resistance to heat)	-	2500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1800 FP-2500
9.25(Resistance to rusting)	-	3000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-2000 FP-3000
9.15(Resistance to abnormal heat and to fire)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-15000 FP-20000
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	12000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-12000
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-5000 FP-7500
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	13500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-11000 FP-13500
9.7.5(Secondary circuit of detection transformers)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-10000 FP-11000
9.7.7.3(Verification of leakage currents across open contacts)	-	2000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-1000 FP-2000
9.23(Ageing of electronic components)	-	25500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-23000 FP-25500
9.10(Mechanical and electrical endurance)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-50000 FP- 70000
9.17(Behaviour in case of failure of the line voltage)	-	8000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-6000 FP-8000
9.19(Behaviour in case of surge currents)	-	16000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-12000 FP-16000
9.21(DC components)	-	11000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-8000 FP-11000
9.12.13(Performance at IΔm)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-57000 FP-70000
9.9.2(Overcurrent operating characteristics)	-	70000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-40000 FP-70000
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-120000
9.24 Annex-A, Test Sequence-H(Surges)	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	60000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP- 60000
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	120000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-120000 FP-120000
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	90000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-60000 FP-90000
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	135000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-90000 FP-135000
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	20000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-20000 FP- 20000
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP- 500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP- 800
9.12.11.2.2(Short circuit test for verifying suitability of RCBOs for use in IT-systems)	-	110000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-80000 FP-110000
9.7.1(Resistance to humidity)	-	15000	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP)
6, 9.3(Indelibility of marking)	-	0	-
8.1.2 , 9.11(Trip-free mechanism)	-	0	-
9.4(Reliability of screws, current-carrying parts and connections)	-	0	-
9.5(Test of reliability of screw-type terminals for external)	-	0	-
9.6(Protection against electric shock)	-	0	-
9.14(Resistance to heat)	-	0	-
9.25(Resistance to rusting)	-	0	-
9.15(Resistance to abnormal heat and to fire)	-	0	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	0	-
9.7.7.5(Verification of the behavior of components bridging the basic insulation)	-	0	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	0	-
9.7.7.1(testing procedure for the impulse withstand voltage tests)	-	0	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	0	-
9.7.5(Secondary circuit of detection transformers)	-	0	-
9.7.7.3(Verification of leakage currents across open contacts)	-	0	-
9.23(Ageing of electronic components)	-	0	-
9.10(Mechanical and electrical endurance)	-	0	-
9.17(Behaviour in case of failure of the line voltage)	-	0	-
9.19(Behaviour in case of surge currents)	-	0	-
9.21(DC components)	-	0	-
9.12.13(Performance at IΔm)	-	0	-
9.9.2(Overcurrent operating characteristics)	-	0	-
9.12.11.4 b) (and 9.12.12)(Performance at service short-circuit capacity)	-	0	-
9.12.11.4 c) (and 9.12.12.2)(Performance at rated short-circuit capacity)	-	0	-
9.24 Annex-A, Test Sequence-H(Surges)	-	0	-
9.24 Annex-A, Test Sequence-I(Conducted sine-wave form voltages or currents)	-	0	-
9.24 Annex-A, Test Sequence-I(Radiated electromagnetic field)	-	0	-
9.24 Annex-A, Test Sequence-I(Fast transients (bursts))	-	0	-
9.24 Annex-A, Test Sequence-J(Conducted common mode disturbances)	-	0	-
9.24 Annex-A, Test Sequence-J(Electrostatic discharges)	-	0	-
8.1.1(General)	-	500	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-500 FP-500
8.1.6(Noninterchangeability)	-	800	Complete testing charges- 1370000 (For3 samples of DP) & 1775000 (For3 samples of FP) DP-800 FP-800

12 May, 2027

-
Included w.e.f, 10/04/2020 Exclusion : Cl.9.24 Annex-A, Test Sequence-H (Harmonics, inter harmonics), Cl.9.24 Annex-A, Test Sequence-H (Signalling voltages).

7418

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 8637 (2020)

H Acid ? Specification ( Second Revision )

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2-Table 1-(i)(Purity (by nitrite value))	-	2500	-
3.2-Table 1-(ii)(Difference between nitrite value and coupling value)	-	2500	-
3.2-Table 1-(iii)(Matter insoluble in sodium carbonate solution)	-	1500	-
3.2-Table 1-(iv)(Purity (by HPCL))	-	4000	-
3.2-Table 1-(v)(Chromotropic acid content,)	-	3000	-
3.2-Table 1-(vi)(Koch’s acid content)	-	3000	-
4.1(Packing )	-	0	NA
4.2(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 20.03.2025

7419

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

Type I, II, III, IV, V, VI, VII and VIII

173600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	0	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Length )	-	250	-
5,Table 1(Width )	-	250	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1000	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1000	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1000	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1000	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1000	-
5,Table 1(Tear resistance (machine direction))	-	1500	-
5,Table 1(Tear resistance (Cross direction))	-	1500	-
5,Table 1(Index puncture resistance,N)	-	2000	-
5,Table 1(Low temperature crack resistance)	-	3000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	10000	-
5,Table 1(Seam strength,kg,Min)	-	3000	-
5,Table 1(Volatile Loss ,% ,Max)	-	1000	-
5,Table 1(Peel strength,kN/m,Min)	-	3000	-
5,Table 1(Resistance to soil burial)	-	10000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1000	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	1000	-
5,Table 1(Tensile strength (Transverse),% change)	-	1000	-
5,Table 1(Elongation at break (Transverse),% change)	-	1000	-
5,Table 1(Water extraction,% loss in weight)	-	1000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	20000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	20000	-
6.0(Dimensions and tolerances)	-	0	-
5, Table-2(Length)	-	250	-
5, Table-2(Width)	-	250	-
5, Table-2(Thickness at 20kPa pressure)	-	500	-
5, Table-2(Tensile Strength (Longitudinal))	-	1000	-
5, Table-2(Tensile Strength (Transverse))	-	1000	-
5, Table-2(Elongation at break (Longitudinal))	-	1000	-
5, Table-2(Elongation at break (Transverse))	-	1000	-
5, Table-2(Tear Strength (Machine direction))	-	1500	-
5, Table-2(Tear Strength (Cross direction))	-	1500	-
5, Table-2(Behaviour during perforation)	-	3000	-
5, Table-2(Height of fall without perforation)	-	1000	-
5, Table-2(Cold crack resistance at low temperature)	-	3000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	10000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	4000	-
5, Table-2(Change in length after heating)	-	2000	-
5, Table-2(Change in width after heating)	-	2000	-
5, Table-2(Resistance to acid and alkali)	-	30000	-
5, Table-2(Strength of welded seam shear resistance)	-	3000	-
5, Table-2(Resistance to static puncturing)	-	3000	-
5, Table-2(Horizontal rate of burning)	-	8500	-
5, Table-2(Vertical rate of burning)	-	8500	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	200	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	200	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	200	-
5,Table 2(Specific Gravity)	-	1000	-

21 Jul, 2028

-
Included w.e.f 13.05.2025

7420

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Category - A & B

3825.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	+ GST as applicable Total Test Charges = Rs. 5100/- (25 % Discount on Test Charges for BIS)
7.2(Flow path in emitters)	-	500	+ GST as applicable
7.3.1(Resistance to Hydrostatic pressure)	-	1000	+ GST as applicable
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	500	+ GST as applicable
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	+ GST as applicable
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	+ GST as applicable
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	600	+ GST as applicable
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-
7.1(Construction and workmanship)	-	0	-
7.2(Flow path in emitters)	-	0	-
7.3.1(Resistance to Hydrostatic pressure)	-	0	-
7.3.2(Resistance to Hydrostatic pressure)	-	0	-
7.3.3(Resistance to Hydrostatic pressure)	-	0	-
7.4.1(Emitter Pull Out In-line emitters)	-	0	-
7.4.2(Emitter Pull Out On-line emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	0	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	-
8.3(Determination of Emitter Exponent)	-	0	-
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	0	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-

09 Aug, 2029

-
Included.w.e.f.30.01.2025

7421

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

25750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	250	Including GST 18%
4.1.2(Sack Width)	-	250	Including GST 18%
4.1.3(Top Closure Width and Bottom Closure Width)	-	250	Including GST 18%
4.1.4(Patch Length)	-	250	Including GST 18%
4.1.5(Patch Height)	-	250	Including GST 18%
4.1.6(Length of Valve)	-	250	Including GST 18%
4.1.7(Width of Valve Sleeve)	-	250	Including GST 18%
4.1.8(Length of Valve Sleeve)	-	250	Including GST 18%
5.1(Raw Material)	-	2500	Including GST 18%
5.2(Fabric)	-	500	Including GST 18%
5.2(Tape density and width)	-	1000	Including GST 18%
5.4(Lamination for PP)	-	2000	Including GST 18%
5.4(Lamination for LDPE)	-	2000	Including GST 18%
6.1(Mass of Bale)	-	500	Including GST 18%
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	3000	Including GST 18%
6.2.2(Weld Strength of Top and Bottom Closures)	-	3000	Including GST 18%
6.3(Drop Impact Testing of Filled Sacks)	-	2500	Including GST 18%
6.4(Ash Content)	-	1500	Including GST 18%
6.5(Air Permeability)	-	3500	Including GST 18%
8(Atomspheric Conditions for Conditioning and Testing)	-	500	Including GST 18%
Cl-5.6(Capacity)	-	500	Including GST 18%
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	250	Including GST 18%
Cl-6.6, Table-1 (iii)(Picks per dm)	-	250	Including GST 18%
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	Including GST 18%

21 Jul, 2028

-
Included w.e.f 27.03.2025

7422

Rajkot Metlab Services LLP, Rajkot

7183706

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	1000	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-
CI.8.1, 8.3 and 8.4.1, Table-1(Carbon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Sulpur)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Phosphorus)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1()	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Silicon)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Chromium)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Nickel)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Molybdenum)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Copper)	-	1500	-
CI.8.1, 8.3 and 8.4.1, Table-1(Vanadium)	-	1500	-
CI.13.2, Table-2(Tensile Test)	-	1500	-
CI.13.2, Table-2(Yield Stress)	-	1500	-
CI.13.2, Table-2(Elongation)	-	1500	-
CI.13.4, Table-2(Bend Test)	-	1000	-
CI.13.3(Impact Test)	-	2500	-
CI.13.3(Hydraulic Test)	-	1500	-
9(Workmanship & Finish)	-	100	-
10(Freedom from defects)	-	100	-
11(Fetting and dressing)	-	100	-
14(Non-destructive tests)	-	1500	-
16(Hydraulic test)	-	1500	-
18(Marking)	-	100	-
1()	-	1000	-

12 Jan, 2028

-
Included w.e.f.18.06.2025

7423

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
Clause - 6.1.1, Table-1( ALUMINIUM)	-	15000	-
Clause - 6.1.1, Table-1(SILICON)	-	15000	-
Clause - 6.1.1, Table-1(NITROGEN)	-	15000	-
Clause - 6.1.1, Table-1(MANGANESE)	-	15000	-
Clause - 6.1.1, Table-1(PHOSPHURS)	-	15000	-
Clause - 6.1.1, Table-1(SULPHUR)	-	15000	-
Clause - 6.1.1, Table-1( CARBON)	-	15000	-
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	15000	-
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	15000	-
6.2 AND AS PER IS 513(NITROGEN)	-	15000	-
6.2 AND AS PER IS 513(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 513(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 513(SILICON)	-	15000	-
6.2 AND AS PER IS 513(MANGANESE)	-	15000	-
6.2 AND AS PER IS 513(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 513(SULPHUR)	-	15000	-
6.2 AND AS PER IS 513(CARBON)	-	15000	-
6.2 AND AS PER IS 10748(COPPER)	-	15000	-
6.2 AND AS PER IS 10748(NITROGEN)	-	15000	-
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	15000	-
6.2 AND AS PER IS 10748(ALUMINIUM)	-	15000	-
6.2 AND AS PER IS 10748(SILICON)	-	15000	-
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	15000	-
6.2 AND AS PER IS 10748(MANGANESE)	-	15000	-
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	15000	-
6.2 AND AS PER IS 10748(SULPHUR)	-	15000	-
6.2 AND AS PER IS 10748(CARBON)	-	15000	-
6.1.1(MANGANESE)	-	15000	-
6.1.1(PHOSPHORUS)	-	15000	-
6.1.1(SULPHUR)	-	15000	-
6.1.1(CARBON)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	15000	-
Cl. 15(Workmanship)	-	15000	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	15000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	15000	-
Cl. 14.1.1(Elongation)	-	15000	-
Cl. 14.1(Tensile Strength)	-	15000	-
Cl. 3.3, 10.2(Plain End)	-	15000	-
Cl. 11(Length)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	15000	-
Cl. 6.5(Height of Internal Fin)	-	15000	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	15000	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	15000	-
Clause 14.1.1(Elongation Percent)	-	15000	-
Clause 11.3(Approximate Length)	-	15000	-
Clause 11.2(Exact Length)	-	15000	-
Clause 11.1(Random Length)	-	15000	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	15000	-
Cl 15(Workmanship)	-	15000	-
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	15000	-
Cl 12(Workmanship)	-	15000	-
Cl 10.1.1(Manufacturing )	-	15000	-
Cl 10.1(Manufacturing )	-	15000	-
Cl 8(Outer Diameter, Thickness & Mass)	-	15000	-
17(Marking)	-	15000	-
cl.17(MARKING)	-	15000	-
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	15000	-

31 Dec, 2029

-
-

7424

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5145 (1969)

Specification for walking sticks

Walking Sticks

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-2.1(Wood)	-	1000	-
Cl.2.2(ALUMINIUM)	-	4000	-
Cl.4(MANUFACTURE)	-	200	-
Cl.5(WORKMANSHIP AND FINISH)	-	200	-
Cl.6.1(STRENGTH TEST)	-	700	-
Cl.7(MARKING)	-	200	-
Cl.8(PACKING)	-	200	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-2.1(Wood)	-	0	-
Cl.2.2(ALUMINIUM)	-	0	-
Cl.4(MANUFACTURE)	-	0	-
Cl.5(WORKMANSHIP AND FINISH)	-	0	-
Cl.6.1(STRENGTH TEST)	-	0	-
Cl.7(MARKING)	-	0	-
Cl.8(PACKING)	-	0	-
Cl-3(Shapes and Dimensions)	-	500	-
Cl-6.2.1(Strength of joint between handle and the stick)	-	1000	-

-
Included w.e.f 25.02.2025

7425

CENTRAL POWER RESEARCH INSTITUTE (CPRI), BHOPAL

8100924

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

1065000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	30000	-
5.2.1(Spring Hammer Test)	-	800	-
5.2.2(Shock Test)	-	2150	-
5.2.3(Vibration Test)	-	2500	-
5.2.4(Test of Resistance to Heat and Fire)	-	8575	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	14590	-
5.3.1(Dry Heat Test)	-	9950	-
5.3.2(Cold Test)	-	9950	-
5.3.3(Damp Heat Cyclic Test)	-	24375	-
5.4.1(Test of Power Consumption)	-	6600	-
5.4.2(Test of influence of voltage dips and interruptions)	-	2500	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	37500	-
5.4.4(Test of Influence of Self-Heating)	-	3000	-
5.4.5(Test of Influence of Heating)	-	2650	-
5.4.6.2(Impulse voltage test)	-	6600	-
5.4.6.3(a.c. voltage test)	-	650	-
5.4.6.4(Insulation resistance test)	-	590	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	19530	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	34740	-
5.5.4(Fast Transient Burst Test)	-	11590	-
5.5.5(Radio Interference Measurement)	-	13900	-
5.5.6(Surge Immunity Test)	-	6960	-
5.6.2(Test of Influence Quantities)	-	18600	-
5.6.3(Test of No-Load Condition)	-	1350	-
5.6.4(Test of Starting Condition)	-	1350	-
5.6.5(Test of Meter Constant)	-	1350	-
5.6.6(Interpretation of Test Results)	-	700	-
5.7(Test of the Load Switch operation for payment function)	-	18000	-
5.8(Test of Charging Functions)	-	1750	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	1750	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	10000	-
6(FUNCTIONAL REQUIREMENTS)	-	5500	-

30 Jun, 2027

-
Included w.e.f 03.03.2025 Exclusion 5.5.5 (Radio Interference Measurement)

7426

Rajkot Metlab Services LLP, Rajkot

7183706

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

8090 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6.1, 6.2(cr + n + mo)	-	1500	-
6.1, 6.2(tin)	-	500	-
6.1, 6.2(boron)	-	500	-
6.1, 6.2(vanadium)	-	500	-
6.1, 6.2(molybdenum)	-	500	-
6.1, 6.2(copper)	-	500	-
6.1, 6.2(cromium)	-	500	-
6.1, 6.2(nickel)	-	500	-
6.1, 6.2(aluminium)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6.1, 6.2(phosphorus)	-	500	-
6.1, 6.2(sulphur)	-	500	-
6.1, 6.2(manganese)	-	500	-
6.1, 6.2(silicon )	-	500	-
6.1, 6.2(carbon)	-	500	-
6, table 1(Chemical Composition)	-	8000	-
7(Freedom from defects)	-	500	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6, table 1(Chemical Composition)	-	1500	-
7(Freedom from defects)	-	100	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	500	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1500	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1500	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
6, table 1(Chemical Composition)	-	8000	-
7(Freedom from defects)	-	500	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	1500	-
9.1, table 2(Yield Strength)	-	1500	-
9.1, table 2(Elongation)	-	1500	-
9.2, table 2(hardness test)	-	1000	-
12.2(Bend Test)	-	1000	-
12.3(grain size)	-	1800	-
12.4(Macrostructure)	-	1800	-
12.5(Ultrasonic Test)	-	1800	-
12.6(Magnetic Particle Test)	-	1800	-
12.7(Blue Fracture Test)	-	1800	-
Cl 12(Supplementary Requirements)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 7(Workmanship)	-	100	-
Cl 8(Diameter, Ovality & Weight)	-	100	-
Cl 9(UTM & HBW)	-	2500	-
Cl 12(Supplementary Requirements)	-	100	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-
9.1(Tensile Strength - IS: 1608(P1))	-	1500	-
9.1(Yield Strength-IS:1608(P1))	-	1500	-
9.1(Elongation on SoA 5.65mm GL)	-	1500	-
9.2(Hardness-HB IS:1500 (P1))	-	1000	-
12.0 & 12.2(Bend Test - IS 1599)	-	1000	-
12.0 & 12.3(Grain Size - IS 4748)	-	1800	-
12.0 & 12.4(Macrostructure- IS 11371)	-	1800	-
12.0 & 12.5(Ultrasnoic Test)	-	1800	-
12.0 & 12.6(Magnetic Particle Test - IS 10138 (P3))	-	1800	-
5(Manufacture)	-	100	-
7(Freedom from defects)	-	100	-
13(Marking)	-	100	-
12.7(Blue fracture test (IS:1875-1985))	-	1800	-
Clause 6, Table 1, Note 1(Cr+Ni+Mo)	-	1500	-
Clause 6, Table 1, Note 2(Cu +(10xTin))	-	1000	-

12 Jan, 2028

-
Included w.e.f 06.06.2025

7427

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

1225000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	75000	-
10.2(Accessibility test (MST 11))	-	50000	-
10.3(Cut susceptibility test (MST 12))	-	50000	-
10.4(Ground Continuity Test (MST 13))	-	75000	-
10.5(Impulse voltage test (MST 14))	-	100000	-
10.6(Dielectric withstand test (MST 16))	-	125000	-
10.7(Temperature test (MST 21))	-	150000	-
10.8(Fire test (MST 23))	-	400000	-
10.9(Reverse Current overload test (MST 26))	-	150000	-
10.10(Module breakage test (MST 32))	-	50000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(UV resistance (MST 54))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Hot spot test (MST 22))	-	0	Testing charge for this clause included in IS 14286: 2010
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	Testing charge for this clause included in IS 14286: 2010

10 Sep, 2027

-
-

7428

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	25000	-
4(Construction requirements)	-	50000	-
5(Polymeric materials)	-	25000	-
6(Internal wiring and current-carrying parts)	-	25000	-
7(Connections)	-	25000	-
8(Bonding and grounding)	-	25000	-
9(Creepage and clearance distances)	-	25000	-
10(Field wiring compartments with covers)	-	25000	-
11(Marking)	-	25000	-

10 Sep, 2027

-
-

7429

TUV Rheinland (India) Pvt., Ltd., Bengaluru (6162126)

6162126

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

850000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual inspection)	-	25000.00	-
10.2(Maximum power determination)	-	50000.00	-
10.3(Insulation test)	-	25000.00	-
10.4(Measurement of temperature coefficients)	-	50000.00	-
10.5(Measurement of NOCT)	-	50000.00	-
10.6(Performance at STC and NOCT)	-	10000.00	-
10.7(Performance at low irradiance)	-	7500.00	-
10.8(Outdoor exposure test)	-	7500.00	-
10.9(Hot-spot endurance test)	-	75000.00	-
10.10(UV preconditioning)	-	50000.00	-
10.11(Thermal cycling test)	-	150000.00	-
10.12(Humidity freeze test)	-	75000.00	-
10.13(Damp heat test)	-	75000.00	-
10.14(Robustness of termination test)	-	25000.00	-
10.15(Wet leakage current test)	-	25000.00	-
10.16(Mechanical load test)	-	50000.00	-
10.17(Hail test)	-	50000.00	-
10.18(Bypass diode thermal' test)	-	40000.00	-
4(Marking)	-	10000.00	-

10 Sep, 2027

-
-

7430

Winwall Technology India Private Limited

7189336

IS 18648 (2024)

Classification and Performance Requirements for Doors Windows and Sliders - Specification

Doors, Windows and Sliders

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7.3(Doors, Windows and Sliders)	-	75000	-
As per Clause 7.3(Doors, Windows and Sliders)	-	75000	-
As per Clause 7.4.2(Doors, Windows and Sliders)	-	75000	-
As per Clause 7.4.3(Doors, Windows and Sliders)	-	75000	-
As per Clause 7.4.4(Doors, Windows and Sliders)	-	75000	-
As per Clause 7.5(Doors, Windows and Sliders)	-	365000	-
As per Clause 6.1.6(Doors, Windows and Sliders)	-	10000	-

28 Oct, 2028

-
-

7431

Basil Quality Testing lab Private Limited

8195736

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	As per Standard Requirements
4.1.2 and A.4.1.2(Maximum height)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	As per Standard Requirements
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	As per Standard Requirements
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	As per Standard Requirements
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	As per Standard Requirements
4.1.4.4 and 6.7.2 (Motion rides)	-	500	As per Standard Requirements
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	As per Standard Requirements
4.1.4.5 (Slides)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	As per Standard Requirements
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	As per Standard Requirements
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	As per Standard Requirements
4.3(Rung ladders, stepladders and stairways)	-	500	As per Standard Requirements
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	As per Standard Requirements
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	As per Standard Requirements
4.3 c(The surface of the tread shall not be slippery)	-	500	As per Standard Requirements
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	As per Standard Requirements
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stepladders)	-	500	As per Standard Requirements
4.3 f(The inclination of rung ladders)	-	500	As per Standard Requirements
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.4.1 (Head and neck entrapment)	-	500	As per Standard Requirements
4.4.2(Entrapment of clothing and hair)	-	500	As per Standard Requirements
4.4.3(Entrapment of feet)	-	500	As per Standard Requirements
4.4.4(Entrapment of fingers)	-	500	As per Standard Requirements
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	As per Standard Requirements
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	As per Standard Requirements
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	As per Standard Requirements
4.6.1 and A.4.6.(Stability of slides)	-	500	As per Standard Requirements
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	As per Standard Requirements
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	As per Standard Requirements
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
5.4(Warnings)	-	500	As per Standard Requirements
5.3(Maintenance instructions)	-	500	As per Standard Requirements
5.2(Assembly and installation instructions)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
5.1(Labelling)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.1(Paddling pools - General)	-	500	As per Standard Requirements
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	As per Standard Requirements
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	As per Standard Requirements
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	As per Standard Requirements
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	As per Standard Requirements
4.10.4.4 and A.4.10(Safe collapse)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	As per Standard Requirements
4.9(Free height of fall for carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.8(Seesaws )	-	500	As per Standard Requirements
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	As per Standard Requirements
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	As per Standard Requirements
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.7.3.2(Toddler swings without a crossbeam)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - Average surface compression)	-	500	As per Standard Requirements
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	As per Standard Requirements
4.7.5(Free swinging elements)	-	500	As per Standard Requirements
4.7.5(Elements excluding free swinging)	-	500	As per Standard Requirements
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	As per Standard Requirements
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Accessible chains)	-	500	As per Standard Requirements
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	As per Standard Requirements
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	As per Standard Requirements
4.8(Seesaws )	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Carousels and rocking toys)	-	500	As per Standard Requirements
4.9(Free height of fall for carousels and rocking toys)	-	500	As per Standard Requirements
4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	As per Standard Requirements
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.1 and A.4.10(Containment - General)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	As per Standard Requirements
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	As per Standard Requirements
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	As per Standard Requirements
4.10.4.4 and A.4.10(Safe collapse)	-	500	As per Standard Requirements
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	As per Standard Requirements
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	As per Standard Requirements
4.11.1(Paddling pools - General)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.2(Edges, points, and small parts)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
4.11.3(Paddling pools with inflatable walls)	-	500	As per Standard Requirements
5.1(Labelling)	-	500	As per Standard Requirements
5.2(Assembly and installation instructions)	-	500	As per Standard Requirements
5.3(Maintenance instructions)	-	500	As per Standard Requirements
5.4(Warnings)	-	500	As per Standard Requirements
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	As per Standard Requirements
4.1.2 and A.4.1.2(Maximum height)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	As per Standard Requirements
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	As per Standard Requirements
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	As per Standard Requirements
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	As per Standard Requirements
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	As per Standard Requirements
4.1.4.4 and 6.7.2 (Motion rides)	-	500	As per Standard Requirements
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	As per Standard Requirements
4.1.4.5 (Slides)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	As per Standard Requirements
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	As per Standard Requirements
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	As per Standard Requirements
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	As per Standard Requirements
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	As per Standard Requirements
4.3(Rung ladders, stepladders and stairways)	-	500	As per Standard Requirements
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	As per Standard Requirements
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	As per Standard Requirements
4.3 c(The surface of the tread shall not be slippery)	-	500	As per Standard Requirements
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	As per Standard Requirements
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stairways)	-	500	As per Standard Requirements
4.3 f(The inclination of stepladders)	-	500	As per Standard Requirements
4.3 f(The inclination of rung ladders)	-	500	As per Standard Requirements
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	As per Standard Requirements
4.4.1 (Head and neck entrapment)	-	500	As per Standard Requirements
4.4.2(Entrapment of clothing and hair)	-	500	As per Standard Requirements
4.4.3(Entrapment of feet)	-	500	As per Standard Requirements
4.4.4(Entrapment of fingers)	-	500	As per Standard Requirements
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	As per Standard Requirements
4.6.1 and A.4.6.(Stability of slides)	-	500	As per Standard Requirements
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	As per Standard Requirements
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	As per Standard Requirements
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	As per Standard Requirements
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	As per Standard Requirements
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	As per Standard Requirements
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	As per Standard Requirements
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.6.4 and A.4.6.(Roller slides)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	As per Standard Requirements
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	As per Standard Requirements
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	As per Standard Requirements
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements
4.7.3.2(Toddler swings without a crossbeam)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	As per Standard Requirements
4.7.4(Impact from swing elements - Average surface compression)	-	500	As per Standard Requirements
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	As per Standard Requirements
4.7.5(Free swinging elements)	-	500	As per Standard Requirements
4.7.5(Elements excluding free swinging)	-	500	As per Standard Requirements
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	500	As per Standard Requirements
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	As per Standard Requirements
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	As per Standard Requirements
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	As per Standard Requirements
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	500	As per Standard Requirements
4.7.3.1(Swings intended for children under 36 months)	-	500	As per Standard Requirements

08 Jan, 2029

-
-

7432

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

TYPE-I, TYPE-II & TYPE-III

30820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2500	GST charges Extra
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1800	GST charges Extra
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	1500	GST charges Extra
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	250	GST charges Extra
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	250	GST charges Extra
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	GST charges Extra
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	3000	GST charges Extra
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1500	GST charges Extra
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1500	GST charges Extra
5.3(Lamination)	-	1500	GST charges Extra
5.4(Sack Fabrication)	-	500	GST charges Extra
5.5(Capacity)	-	500	GST charges Extra
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	14520	UV Resistance- 11520 + breaking strength-3000.0 (GST charges Extra)
7(PRINTING, PACKAGING AND MARKING)	-	500	GST charges Extra
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	500	GST charges Extra
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

21 Jul, 2028

-
Included w.e.f 27.03.2025

7433

Basil Quality Testing lab Private Limited

8195736

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	500	As per Applicable
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	500	As per Applicable
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	As per Applicable
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	500	As per Applicable
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	As per Applicable
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	500	As per Applicable
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	As per Applicable
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	As per Applicable
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	As per Applicable
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	As per Applicable
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	500	As per Applicable
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	500	As per Applicable
4.1(General)	-	500	As per Applicable

08 Jan, 2029

-
-

7434

Basil Quality Testing lab Private Limited

8195736

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Normal use)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse)	-	500	As per Standard Requirement
4.3.1(Material quality)	-	500	As per Standard Requirement
4.3.2(Expanding materials)	-	500	As per Standard Requirement
4.4.1(For children under 36 months)	-	500	As per Standard Requirement
4.4.2(For children 36 months and over but under 72 months)	-	500	As per Standard Requirement
4.5.1.2(Squeeze toys, rattles, and certain other toys and components of toys)	-	500	As per Standard Requirement
4.5.1.3(Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months)	-	500	As per Standard Requirement
4.5.1.4(Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months)	-	500	As per Standard Requirement
4.5.2(Small balls)	-	500	As per Standard Requirement
4.5.4(Pre-school playfigures)	-	500	As per Standard Requirement
4.5.5(Toy pacifiers)	-	500	As per Standard Requirement
4.5.6(Balloons)	-	500	As per Standard Requirement
4.5.7(Marbles)	-	500	As per Standard Requirement
4.5.8(Hemisphericshaped toys)	-	500	As per Standard Requirement
4.6.1(Accessible sharp edges of glass or metal)	-	500	As per Standard Requirement
4.6.2(Functional sharp edges)	-	500	As per Standard Requirement
4.6.3(Edges on metal toys)	-	500	As per Standard Requirement
4.6.4(Edges on moulded toys)	-	500	As per Standard Requirement
4.6.5(Edges on exposed bolts or threaded rods)	-	500	As per Standard Requirement
4.7.1(Accessible sharp points)	-	500	As per Standard Requirement
4.7.2(Functional sharp points)	-	500	As per Standard Requirement
4.7.3(Wooden toys)	-	500	As per Standard Requirement
4.8(Projections)	-	500	As per Standard Requirement
4.9(Metal wires and rods)	-	500	As per Standard Requirement
4.10(Plastic film or plastic bags in packaging and in toys)	-	500	As per Standard Requirement
4.11.1(General)	-	500	As per Standard Requirement
4.11.2(Cords in toys intended for children under 18 months)	-	500	As per Standard Requirement
4.11.3(Cords in toys intended for children 18 months and over but under 36 months)	-	500	As per Standard Requirement
4.11.4(Fixed loops and nooses intended for children under 36 months)	-	500	As per Standard Requirement
4.11.5(Cords on pull toys)	-	500	As per Standard Requirement
4.11.6(Electrical cables)	-	500	As per Standard Requirement
4.11.7(Diameter of certain cords intended for children under 36 months)	-	500	As per Standard Requirement
4.11.8(Self-retracting cords intended for children under 36 months)	-	500	As per Standard Requirement
4.11.9(Toys attached to or intended to be strung across, or otherwise attached to, a cradle, cot, perambulator or carriage)	-	500	As per Standard Requirement
4.11.10(Cords on toy bags)	-	500	As per Standard Requirement
4.11.11(Cords, strings and lines for flying toys)	-	500	As per Standard Requirement
4.12.1(Toy pushchairs, perambulators and similar toys)	-	500	As per Standard Requirement
4.12.2(Other toys with folding mechanisms)	-	500	As per Standard Requirement
4.12.3(Hinge-line clearance)	-	500	As per Standard Requirement
4.13.1(Circular holes in rigid materials)	-	500	As per Standard Requirement
4.13.2(Accessible clearances for movable ,segments)	-	500	As per Standard Requirement
4.13.3(Chains or belts in ride-on toys)	-	500	As per Standard Requirement
4.13.4(Other driving mechanisms)	-	500	As per Standard Requirement
4.13.5(Winding keys)	-	500	As per Standard Requirement
4.14(Springs)	-	500	As per Standard Requirement
4.15.1.1(Sideways stability, feet available for stabilization)	-	500	As per Standard Requirement
4.15.1.2(Sideways stability, feet unavailable for stabilization)	-	500	As per Standard Requirement
4.15.1.3(Fore and aft stability)	-	500	As per Standard Requirement
4.15.2(Overload requirements for ride-on toys and seats)	-	500	As per Standard Requirement
4.15.3(Stability of stationary floor toys)	-	500	As per Standard Requirement
4.16.1(Ventilation)	-	500	As per Standard Requirement
4.16.2.1(Lids, doors and similar devices)	-	500	As per Standard Requirement
4.16.2.2(Lid support for toy chests and similar toys)	-	500	As per Standard Requirement
4.16.3(Toys that enclose the head)	-	500	As per Standard Requirement
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	As per Standard Requirement
4.18.2(Projectiles)	-	500	As per Standard Requirement
4.18.3(Projectile toys with stored energy)	-	500	As per Standard Requirement
4.18.4(Projectile toys without stored energy)	-	500	As per Standard Requirement
4.19(Rotors and propellers)	-	500	As per Standard Requirement
4.20(Aquatic toys)	-	500	As per Standard Requirement
4.21(Braking)	-	500	As per Standard Requirement
4.22.1(Instructions for use)	-	500	As per Standard Requirement
4.22.2(Determination of maximum saddle height)	-	500	As per Standard Requirement
4.22.3(Braking requirements)	-	500	As per Standard Requirement
4.23(Speed limitation of electrically driven ride-on toys)	-	500	As per Standard Requirement
4.24(Toys containing a heat source)	-	500	As per Standard Requirement
4.25(Liquid -filled toys)	-	500	As per Standard Requirement
4.26(Mouth - actuated toys)	-	500	As per Standard Requirement
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	As per Standard Requirement
4.28(Percussion caps specifically designed for use in toys)	-	500	As per Standard Requirement
4.29(Acoustic requirements)	-	500	As per Standard Requirement
4.30.2(Warnings and instructions for use)	-	500	As per Standard Requirement
4.30.3(Strength)	-	500	As per Standard Requirement
4.30.4(Stability)	-	500	As per Standard Requirement
4.30.5(Adjustable and folding steering tubes and handlebars)	-	500	As per Standard Requirement
4.30.6(Braking)	-	500	As per Standard Requirement
4.30.7(Wheel size)	-	500	As per Standard Requirement
4.30.8(Projections)	-	500	As per Standard Requirement
4.31.1(Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	As per Standard Requirement
4.31.2(All other toys with magnets and magnetic components)	-	500	As per Standard Requirement
4.32(Yo-yo balls)	-	500	As per Standard Requirement
4.33(Straps intended to be worn fully or partially around the neck)	-	500	As per Standard Requirement
4.34(Sledges and toboggans with cords for pulling)	-	500	As per Standard Requirement
4.35(Jaw entrapment in handles and steering wheels)	-	500	As per Standard Requirement
4.1(Normal use)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.2 Drop test)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.3 Tip-over test for large and bulky toys)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.4 Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.5 Torque test)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.1- Tension test- General)	-	500	As per Standard Requirement
4.2("Reasonably foreseeable abuse- Cl. 5.24.6.2- Tension test- Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys ")	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.3- Tension test- Tension test for pompoms)	-	500	As per Standard Requirement
4.2(Reasonably foreseeable abuse- Cl. 5.24.6.4- Tension test- Tension test for protective components)	-	500	As per Standard Requirement
4.5.3(Pompoms)	-	500	As per Standard Requirement

08 Jan, 2029

-
-

7435

BIS, Guwahati Branch Laboratory (GBL)

None

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
6.1 (Load Bearing Capacity Test - Cl. 6.1, IS 5913)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-
12 (Marking - Indication of source of manufacture - Cl. 12)	-
12 (Marking - Year & Date of manufacture - Cl. 12)	-
12 (Marking - Pictorial warning signs as given in IS 12081 (Part 2) : 1987 - Cl. 12)	-
6.2 (Impermeability)	-

-
Qty. required 3 Sheets (Full size)

7436

Alpha Test House Private Limited, Delhi

8131026

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	50	-
5(General conditions for the tests)	-	50	-
6(Classification)	-	50	-
7(Marking and instructions)	-	250	-
8(Protection against access to live parts)	-	100	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	500	-
11(Heating)	-	200	-
13(Leakage current and electric strength at operating temperature)	-	500	-
14(Transient overvoltages)	-	100	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
18(Endurance)	-	100	-
19(Abnormal operation)	-	100	-
20(Stability and mechanical hazards)	-	100	-
21(Mechanical strength)	-	200	-
22(Construction)	-	500	-
23(Internal wiring)	-	100	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	100	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	200	-
28(Screws and connections)	-	200	-
29(Clearances, creepage distances and solid insulation)	-	200	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
A.101(Pressure test)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	200	-
22.102(Closed water heaters)	-	200	-
22.103(Addition)	-	200	-
22.104(Addition)	-	200	-
22.105(Cistern-type water heaters)	-	200	-
22.109(Addition)	-	200	-

-
Included .w.e.f.11.02.2025 Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC)

7437

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	200	-
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	200	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	200	-
5.4.2-IS: 3025(P-11)(Ph)	-	200	-
Cl 5.4 (b)(Alkalinity)	-	200	-
Cl 5.4 (a)(Acidity)	-	200	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	200	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	200	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	200	-
Cl 5.4 Table 1 (iv)(Chloride)	-	200	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	200	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	200	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	200	-
Cl 5.4 .2(pH)	-	200	-
16.1(Average Compressive Strength)	-	2000	-
16.1(Compressive Strength of Individual Samples )	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	200	-
16.1(Compressive Strength of Individual Samples )	-	700	-
Clause 5.4(Description)	-	1000	-
5.1(Cement)	-	0.0	-
5.2(Mineral Admixtures)	-	0.0	-
5.3(Aggregates)	-	0.0	-
5.6(Reinforcement)	-	0.0	-
5.7(Storage of Materials)	-	0.0	-
7(Workability of Concrete)	-	0.0	-
8(Durability of concrete)	-	0.0	-
9(Concrete mix proportioning)	-	0.0	-
16.2(Flexural Strength)	-	0.0	-
17.4(Core test)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	200	-
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	200	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	200	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	200	-
5.4.2-IS: 3025(P-11)(Ph)	-	200	-
Cl 5.4 (b)(Alkalinity)	-	200	-
Cl 5.4 (a)(Acidity)	-	200	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	200	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	200	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	200	-
Cl 5.4 Table 1 (iv)(Chloride)	-	200	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	200	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	200	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	200	-
Cl 5.4 .2(pH)	-	200	-
16.1(Average Compressive Strength)	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
16.1(Compressive Strength of Individual Samples )	-	700	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	200	-
16.1(Compressive Strength of Individual Samples )	-	700	-
Clause 5.4(Description)	-	0.0	-
5.1(Cement)	-	0.0	-
5.2(Mineral Admixtures)	-	0.0	-
5.3(Aggregates)	-	0.0	-
5.6(Reinforcement)	-	0.0	-
5.7(Storage of Materials)	-	0.0	-
7(Workability of Concrete)	-	0.0	-
8(Durability of concrete)	-	0.0	-
9(Concrete mix proportioning)	-	0.0	-
16.2(Flexural Strength)	-	0.0	-
17.4(Core test)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-
cl 5.4.4.3(Initial Setting Time)	-	0.0	-

-
Included w.e.f. 24.02.2025 Exclusion Breaking strength above 96 mm

7438

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

Grade-BWP/MR

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	0	--
Clause No -6.2(Alternative Materials (LVL)	-	0	--
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	--
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	--
Clause No -6.2(Alternative Materials -plywood)	-	0	--
Clause No -6.2(BWP grade flush door shutter)	-	0	--
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	--
Clause No -6.4(Adhesive)	-	0	--
Clause No -7.1(Construction)	-	0	--
Clause No - 7.3(" MDF board or HDF board ")	-	0	--
Clause No -9.2("Workmanship and finish")	-	200	--
Clause No -10.1(tests for flush door shutters)	-	21000	15% Discount for BIS Samples
Clause No -10.2(End Immersion Test)	-	2500	15% Discount for BIS Samples
Clause No -10.3(Glue Adhesion Test)	-	1500	15% Discount for BIS Samples
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	--
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	--
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	0	--
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	--
Cl-6.3.2(MDF board and HDF board)	-	0	--
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	0	--
Cl-7.2(Face Panel)	-	0	---
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	--
Cl-8(Fittings)	-	0	--
Clause No - 6.1(Timber)	-	0	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	0	-
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	0	-
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	0	-
Clause No -10.1(tests for flush door shutters)	-	0	-
Clause No -10.2(End Immersion Test)	-	0	-
Clause No -10.3(Glue Adhesion Test)	-	0	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	0	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	0	-
Cl-7.2(Face Panel)	-	0	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	-
Cl-8(Fittings)	-	0	-

26 Aug, 2027

-
Included w.e.f 04.03.2025

7439

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	0	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	0	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	0	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	0	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	200	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.1(General)	-	0	-
16.0(General)	-	0	-
15.3(Humidity Test)	-	0	-
15.2(Spillage Test)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(Moisture resistance)	-	900	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	400	-
13.2(Leakage current at operating temperature)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	200	-
11.3(Heating)	-	0	-
11.2(General)	-	0	-
11.1(General)	-	0	-
10.2(Current input)	-	200	-
10.1(Power input)	-	200	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	400	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
7(Marking and instructions)	-	400	-
A.2(Earth continuity test)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	200	-
21.3(Mechanical Strength, IS 302-1)	-	200	-
22.5(Construction)	-	200	-
22.6(Construction, IS 302-1)	-	200	-
22.11(Construction, IS 302-1)	-	200	-
22.16(Construction)	-	200	-
22.32(Construction, IS 302-1)	-	200	-
22.42(Construction)	-	200	-
23.3(Internal Wiring, IS 302-1)	-	200	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	200	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	200	-
26.5(Terminals for external conductors)	-	200	-
27.5(Provision for Earthing, IS 302-1)	-	200	-
28.1(Screws and connections)	-	100	-
22.2(Construction, IS 302-1)	-	0	-
22.3(Construction, IS 302-1)	-	0	-
B.22.4(Construction, IS 302-1)	-	0	-
B.22.5(Construction, IS 302-1)	-	0	For BIS only = Rs 19000/- For others = Rs 40000/-

-
Exclusion 19.11.4.1 to 19.11.4.7 (EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

7440

Unique Test House LLP

9134536

IS 3989 (2024)

CENTRIFUGALLY CAST (SPUN) IRON SPIGOT AND SOCKET PIPES, FITTINGS AND ACCESSORIES ï¿½ SPECIFICATION (Fourth Revision)

All sizes

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(General requirements)	-	2000	-
Cl-4(MATERIALS AND MANUFACTURE)	-	1000	-
Cl-5(HAMMER TEST)	-	1500	-
Cl-6(HYDROSTATIC TEST)	-	2500	-
Cl-7(SIZES)	-	1000	-
Cl-8(TOLERANCES)	-	500	-
Cl-8.1 (i)(External diameter of barrel, DE)	-	500	-
Cl-8.1 (ii)(Internal diameter of socket, DI)	-	1000	-
Cl-8.1 (iii)(Depth of socket, P)	-	500	-
Cl-8.2(Tolerance on length)	-	500	-
Cl-8.3(Tolerances on dimensions)	-	500	-
Cl-8.4(Tolerance on wall thickness)	-	500	-
Cl-9(Coating)	-	1000	-
Cl-10(Marking)	-	500	-

07 Sep, 2028

-
Included.w.e.f.31.01.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number