BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7471

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	1000	-
9.3, Table 3 (Yield Strength, Mpa)	-	800	-
9.3, Table 3 (Tensile Strength, Mpa)	-	1000	-
9.3, Table 3 (Elongation, %)	-	800	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	900	-
11(Surface finish)	-	0	-
12(Dimensions)	-	500	-
14.1(Thickness,mm)	-	280	-
14.2( Width, mm)	-	250	-
14.3(Length, mm)	-	250	-
14.4(Flatness, mm)	-	350	-
14.5(Camber, mm)	-	350	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	1000	-
17(Marking)	-	0	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	800	-
4.1(General requirements)	-	0	-
6(Freedom from defects)	-	500	-
7(Heat treatment)	-	0	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	700	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	900	-
9.1(Sample plan)	-	0	-
9.2(Tensile test)	-	1000	-
9.3(Mechanical properties)	-	1250	-
9.4(Erichsen cupping test)	-	800	-
10(Retests)	-	1000	-
11(Surface finish)	-	0	-
12(Dimensions)	-	750	-
13(Edge condition)	-	0	-
14.1(Thickness)	-	250	-
14.2.1(Mill Edge)	-	250	-
14.2.2(Trimmed Edge)	-	250	-
14.3(Length)	-	250	-
14.4(Flatness)	-	300	-
14.5(Camber)	-	300	-
15(Inspection)	-	0	-
17(Marking)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
6(Freedom From Defects)	-	250	-
9.3(Tensile Test-1608:Part 1)	-	1200	-
9.3, Table 3 (Yield Strength, Mpa)	-	1000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	1000	-
9.3, Table 3 (Elongation, %)	-	1000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	1200	-
11(Surface finish)	-	650	-
12(Dimensions)	-	500	-
14.1(Thickness,mm)	-	250	-
14.2( Width, mm)	-	250	-
14.3(Length, mm)	-	250	-
14.4(Flatness, mm)	-	25	-
14.5(Camber, mm)	-	250	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	250	-
17(Marking)	-	0	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	1200	-
4.1(General requirements)	-	0	-
6(Freedom from defects)	-	500	-
7(Heat treatment)	-	0	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	1100	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	500	-
9.1(Sample plan)	-	0	-
9.2(Tensile test)	-	1200	-
9.3(Mechanical properties)	-	1200	-
9.4(Erichsen cupping test)	-	1200	-
10(Retests)	-	1500	-
11(Surface finish)	-	300	-
12(Dimensions)	-	300	-
13(Edge condition)	-	0	-
14.1(Thickness)	-	250	-
14.2.1(Mill Edge)	-	250	-
14.2.2(Trimmed Edge)	-	250	-
14.3(Length)	-	250	-
14.4(Flatness)	-	250	-
14.5(Camber)	-	250	-
15(Inspection)	-	0	-
17(Marking)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
6(Freedom From Defects)	-	0	-
9.3(Tensile Test-1608:Part 1)	-	0	-
9.3, Table 3 (Yield Strength, Mpa)	-	0	-
9.3, Table 3 (Tensile Strength, Mpa)	-	0	-
9.3, Table 3 (Elongation, %)	-	0	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
14.1(Thickness,mm)	-	0	-
14.2( Width, mm)	-	0	-
14.3(Length, mm)	-	0	-
14.4(Flatness, mm)	-	0	-
14.5(Camber, mm)	-	0	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	0	-
17(Marking)	-	0	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	0	-
4.1(General requirements)	-	0	-
6(Freedom from defects)	-	0	-
7(Heat treatment)	-	0	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	0	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	0	-
9.1(Sample plan)	-	0	-
9.2(Tensile test)	-	0	-
9.3(Mechanical properties)	-	0	-
9.4(Erichsen cupping test)	-	0	-
10(Retests)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
13(Edge condition)	-	0	-
14.1(Thickness)	-	0	-
14.2.1(Mill Edge)	-	0	-
14.2.2(Trimmed Edge)	-	0	-
14.3(Length)	-	0	-
14.4(Flatness)	-	0	-
14.5(Camber)	-	0	-
15(Inspection)	-	0	-
17(Marking)	-	0	-

-
Included w.e.f 16.05.2025

7472

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	600	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	300	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	300	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	350	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	800	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	800	-
Cl. 7(Al - IS 504)	-	400	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	1250	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	800	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1250	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	800	-
Cl. 8.2(Bend Test - IS 1599)	-	900	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	700	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	-
Cl. 12(Retests - IS 737/ IS 10259)	-	1200	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Al - IS 504)	-	500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1000	-
Cl. 8.2(Bend Test - IS 1599)	-	1000	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	1000	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	-
Cl. 12(Retests - IS 737/ IS 10259)	-	2000	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Al - IS 504)	-	500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1000	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1000	-
Cl. 8.2(Bend Test - IS 1599)	-	1000	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	1000	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	-
Cl. 12(Retests - IS 737/ IS 10259)	-	2000	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-
Cl. 4(Ordering Information - IS 737)	-	500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	500	-
Cl. 4 (b)(Condition - IS 737)	-	500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	500	-
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Al - IS 504)	-	500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	500	-
Cl. 8.2(Bend Test - IS 1599)	-	500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	-
Cl. 11(Selection of Test Samples - IS 737)	-	500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	500	-
Cl. 13.1(Marking - IS 737)	-	500	-

-
Included w.e.f. 18.02.2025

7473

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	250	-
Cl-6.1, Table-1(Fe)	-	250	-
Cl-6.1, Table-1(Cu)	-	200	-
Cl-6.1, Table-1(Mn)	-	200	-
Cl-6.1, Table-1(Mg)	-	200	-
Cl-6.1, Table-1(Cr)	-	200	-
Cl-6.1, Table-1(Ni)	-	200	-
Cl-6.1, Table-1(Zn)	-	200	-
Cl-6.1, Table-1(Pb)	-	200	-
Cl-6.1, Table-1(Sn)	-	250	-
Cl-6.1, Table-1(Ti)	-	200	-
Cl-6.1, Table-1(Others elements Each)	-	200	-
Cl-6.1, Table-1(Others elements Total)	-	300	-
Cl-6.1, Table-1(Aluminium)	-	250	-
Cl-6.2(The chemical analysis)	-	250	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	600	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	600	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	600	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	600	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	600	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	600	-
Cl-7.2(Tensile Tests)	-	600	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	600	-
Cl-8(Freedom from Defects)	-	500	-
Cl-11(RETEST)	-	650	-
Cl. 6(Silicon)	-	250	-
Cl. 6(Iron)	-	250	-
Cl. 6(Copper)	-	250	-
Cl. 6(Manganese)	-	250	-
Cl. 6(Magnesium)	-	250	-
Cl. 6(Chromium)	-	250	-
Cl. 6(Nickel)	-	250	-
Cl. 6(Zinc)	-	250	-
Cl. 6(Lead)	-	250	-
Cl. 6(Tin)	-	250	-
Cl. 6(Titanium)	-	250	-
Cl. 6(Others Element Each)	-	300	-
Cl. 6(Others Element Total)	-	300	-
Cl. 6(Aluminium)	-	250	-
Cl. 6(Silver)	-	250	-
Cl. 6(Zirconium)	-	250	-
Cl. 6(Titanium+Zirconium)	-	300	-
Cl. 6(Antimony)	-	250	-
Cl. 6(Cobalt)	-	200	-
Cl. 6(Antimony+Cobalt)	-	300	-
Cl. 6(Beryllium)	-	250	-
Cl-6.1, Table-1(Si)	-	250	-
Cl-6.1, Table-1(Fe)	-	250	-
Cl-6.1, Table-1(Cu)	-	250	-
Cl-6.1, Table-1(Mn)	-	250	-
Cl-6.1, Table-1(Mg)	-	250	-
Cl-6.1, Table-1(Cr)	-	250	-
Cl-6.1, Table-1(Ni)	-	250	-
Cl-6.1, Table-1(Zn)	-	250	-
Cl-6.1, Table-1(Pb)	-	250	-
Cl-6.1, Table-1(Sn)	-	250	-
Cl-6.1, Table-1(Ti)	-	250	-
Cl-6.1, Table-1(Others elements Each)	-	250	-
Cl-6.1, Table-1(Others elements Total)	-	250	-
Cl-6.1, Table-1(Aluminium)	-	250	-
Cl-6.2(The chemical analysis)	-	250	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	500	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	500	-
Cl-7.2(Tensile Tests)	-	1500	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	500	-
Cl-8(Freedom from Defects)	-	500	-
Cl-11(RETEST)	-	2000	-
Cl. 6(Silicon)	-	250	-
Cl. 6(Iron)	-	250	-
Cl. 6(Copper)	-	250	-
Cl. 6(Manganese)	-	250	-
Cl. 6(Magnesium)	-	250	-
Cl. 6(Chromium)	-	250	-
Cl. 6(Nickel)	-	250	-
Cl. 6(Zinc)	-	250	-
Cl. 6(Lead)	-	250	-
Cl. 6(Tin)	-	250	-
Cl. 6(Titanium)	-	250	-
Cl. 6(Others Element Each)	-	250	-
Cl. 6(Others Element Total)	-	250	-
Cl. 6(Aluminium)	-	250	-
Cl. 6(Silver)	-	250	-
Cl. 6(Zirconium)	-	250	-
Cl. 6(Titanium+Zirconium)	-	250	-
Cl. 6(Antimony)	-	250	-
Cl. 6(Cobalt)	-	250	-
Cl. 6(Antimony+Cobalt)	-	250	-
Cl. 6(Beryllium)	-	250	-

-
Included w.e.f. 13.12.2024 Exclusion: Cl.10 (Pressure Test)

7474

Unique Test House LLP

9134536

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	300	-
Clause - 7.1(SULPHUR)	-	300	-
Clause - 7.1(PHOSPHURS)	-	300	-
Clause - 7.1(MANGANESE)	-	300	-
Clause - 7.1(NITROGEN)	-	4000	-
As per Clause 10(Dimension)	-	200	-
As per Clause 10.1(Dimension Width)	-	300	-
As per Clause 10.1(Dimension Thickness)	-	300	-
As per Clause 10.2(Dimension Length)	-	300	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	200	-
As per Clause 11.5(Bend)	-	500	-
As per Clause 11.6(Camber)	-	300	-
As per Clause 11.7 (i)(Out of Square)	-	300	-
As per Clause 11.7 (ii)(Round Corners)	-	300	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	300	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	300	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	300	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	300	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	300	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	300	-
As per Clause 11.7 (ix)(Scarfing pits)	-	300	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	200	-
Clause. 13(Macro examination test.)	-	500	-
Clause. 13(Macro examination test.)	-	500	-
Clause. 14(Marking)	-	200	-
Clause.15(Ordering information)	-	200	-
Clause.6.0(Manufacture)	-	200	-
Clause.7.1(Silicon)	-	300	-
Clause.7.1(Carbon Equbalant)	-	300	-
Clause.7.1(Microalloy element)	-	300	-

07 Sep, 2028

-
Included w.e.f. 29.11.2024 Exclusion: Clause. 13 (Sulphur print, INCLUSION CONTENT)

7475

BIS, Eastern Regional Laboratory (ERL)

None

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

Rs.9480/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Workmanship and Finish )	-
3.4-Table 1(i) (Requirements of Rubber Used for Gaskets-Hardness IRHD)	-
3.4-Table 1(ii) (Requirements of Rubber Used for Gaskets-Tensile strength,)	-
3.4-Table 1(iii) (Requirements of Rubber Used for Gaskets-Elongation at break)	-
3.4-Table 1(iv-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(iv-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-
3.4-Table 1(v-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(v-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-
3.4-Table 1(vi) (Compression set)	-
3.5-ANNEX C (PERFORMANCE TEST FOR PRESSURE COOKER )	-
Clause 4.3 Table 1 (Zinc oxide)	-
Clause 3.4 Table 1 (Heavy metal content)	-

-
Chem- C (Total ZnO & Heavy metals only) SL NO. 1 xii) N-Nitrosamines xiii) N-Nitrosatables Mech: Hydrostatic test

7476

DELHI TEST HOUSE, Azadhpur

8131406

IS 2785 (2022)

CHEESE - SPECIFICATION (Second Revision of IS 2785)

9480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Appearance - IS 2785 :2022)	-	500	FOR COMPLETE TESTING - 12000
5.2.2(Odour and Flavour-IS 2785 :2022)	-	500	FOR COMPLETE TESTING - 12000
5.2.3(Texture and Consistency)	-	500	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (a) Hard Pressed Cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Semi Hard Chesse(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (a) Hard Pressed Cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Semi Hard Chesse(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) © Semi Soft chesse(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) © Semi Soft chesse(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d) Soft Chesse(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d) Soft Chesse(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d) Extra hard Cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d) Extra hard Cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (a) Cheddar(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i)(Individual or Named Variety Chesses)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (a) Cheddar(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Danbo(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Danbo(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) © Edam(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) © Edam(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d)Gouda(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (d)Gouda(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati 30 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati 30 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati 60 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (e) Harvati 60 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter 30 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter 30 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter 60 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (f) Tilsiter 60 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (g) Cottage cheese and creamed cottage cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (g) Cottage cheese and creamed cottage cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (h) Cream cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (h) Cream cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (h) Cream cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (j) Coulommiers(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (j) Coulommiers(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 30 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 30 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 40 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 40 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 45 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 55 percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 55 percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (m) Brie(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (m) Brie(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (n) Saint Paulin(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (n) Saint Paulin(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (p) Samsoe(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (p) Samsoe(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (p) Samsoe 30percent(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (p) Samsoe 30percent(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (q) Emmentaler(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (q) Emmentaler(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) ® Provolone Smoked(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) ® Provolone Smoked(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) ® Provolone Umsmoked(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (r\|)Provolone Umsmoked(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (s) Extra hard grating cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (s) Extra hard grating cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (t) Mozzarella Cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (t) Mozzarella Cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (u) Pizza Cheese(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (u) Pizza Cheese(Milk fat (On dry basis) IS 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (a) Processed Cheese(a) Moisture IS- 2785-2022 (Processed cheeze when sold in package othen than tin))	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (a) Processed Cheese(a) Moisture IS- 2785-2022 (Processed cheeze when sold in package othen than tin))	-	1000	FOR COMPLETE TESTING - 12000
4 and 5.3 Table 1 (iii) (a) Processed Cheese(b) Moisture IS- 2785-2022 (Processed cheeze in chiplets, packed sliced))	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (a) Processed Cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (a) Processed Cheese(Lactose IS 11963)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread(Moisture IS- 2785-2022)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Processed Cheese Spread(Lactose -IS 11963)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (b) Processed Cheese Spread(Lactose -IS 11963)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iv) (a) Creamed whey chesses(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iv) (b) Whey Cheese(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (iv) (c) Skimmed whey chesse(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (a) Soft Cheese in brine(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (b) Semi-hard cheese in brine(Milk fat (On dry basis) IS 12758-2005)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-i(Coliform-IS 5401(P-1):2012)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-ii(S.aureus-IS 5887(P-8/Sec-1):2002)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-iii(Yeast & Mould count-IS 5403:1999)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-iv(E.coli-IS 5887(P-1):1976)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-v(Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-	1000	FOR COMPLETE TESTING - 12000
5.4 Table 2-vi(L.monocytogenes-IS 14988(P-1):2020)	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-i(Aerobic Colony count - IS 5402 (Part 2))	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-ii(Coliform-IS 5401(P-1):2012)	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-iii(S.aureus-IS 5887(P-8/Sec-1):2002)	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-iv(E.coli-IS 5887(P-1):1976)	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-v(Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-	1000	FOR COMPLETE TESTING - 12000
5.5 Table 3-vi(L.monocytogenes-IS 14988(P-1):2020)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (i)(Coliform Count)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (iii)(Yeast and Mold Count)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (iv)(E. coli)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (v)(Salmonella sp)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (vi)(Listeria monocytogenes)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (i)(Aerobic Colony Count)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (ii)(Coliform Count)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (iii)(Staphylococcus aureus (Coagulase positive))	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (iv)(E. coli)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (v)(Salmonella sp)	-	1000	FOR COMPLETE TESTING - 12000
CL 5.5, Table 3 (vi)(Listeria monocytogenes)	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert(Camembert)	-	500	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (k) Camembert 45 percent(%)	-	500	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) (p) Samsoe(Samsoe)	-	500	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i) ® Provolone(Provolone)	-	500	FOR COMPLETE TESTING - 12000
CL 5.4, Table 2 (ii)(Staphylococcus aureus (Coagulase positive))	-	1000	FOR COMPLETE TESTING - 12000
3 and 5.3 Table 1 (i)(Cheese)	-	500	FOR COMPLETE TESTING - 12000

17 Jun, 2027

-
Included.w.e.f.02.01.2025

7477

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	1500	-
Cl. No.6(CONDITION)	-	500	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No. 8.1(Dimensions)	-	800	-
Cl. No. 8.2(Tolerances)	-	650	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	1300	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1000	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	950	-
Cl. No. 10.3(Drift Expanding Test)	-	850	-
Cl. No. 10.4(Non-Destructive Testing)	-	0	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1000	-
Cl. No. 13(Marking)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	5000	-
Cl. No.5(Grades)	-	0	-
Cl. No.6(CONDITION)	-	0	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No. 8.1(Dimensions)	-	500	-
Cl. No. 8.2(Tolerances)	-	400	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	1000	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1000	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	700	-
Cl. No. 10.3(Drift Expanding Test)	-	800	-
Cl. No. 10.4(Non-Destructive Testing)	-	0	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1000	-
Cl. No. 13(Marking)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	5000	-
Cl. No.5(Grades)	-	0	-
Cl. No.6(CONDITION)	-	0	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	0	-
Cl. No. 8.1(Dimensions)	-	0	-
Cl. No. 8.2(Tolerances)	-	0	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	0	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	0	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	0	-
Cl. No. 10.3(Drift Expanding Test)	-	0	-
Cl. No. 10.4(Non-Destructive Testing)	-	0	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	0	-
Cl. No. 13(Marking)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	0	-

-
Included w.e.f 22.07.2025 Excluding Non destructive testing.

7478

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	20% Discount to BIS
Clause No - 5.18(linear and angular dimension)	-	2000	20% Discount to BIS
Clause No - 6.2(harmfull ingress of water)	-	1500	20% Discount to BIS
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1500	20% Discount to BIS
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1500	20% Discount to BIS
Clause No - 8.2(Addition)	-	1000	20% Discount to BIS
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	20% Discount to BIS
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1500	20% Discount to BIS
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1200	20% Discount to BIS
Clause No - 14(Impulse test voltage)	-	2000	20% Discount to BIS
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	20% Discount to BIS
Clause No -19.11.4.1(electrostatic discharge)	-	1500	20% Discount to BIS
Clause No -19.11.4.3(fast transient)	-	1500	20% Discount to BIS
Clause No -19.11.4.4(Voltage dips and interruption)	-	1500	20% Discount to BIS
Clause No -21.1(Mechanical strength)	-	1000	20% Discount to BIS
Clause No -22.1(construction)	-	1000	20% Discount to BIS
Clause No -22.11(push force applied)	-	1000	20% Discount to BIS
Clause No -24.1.2(safety isolating transformer)	-	1000	20% Discount to BIS
Clause No -24.1.3(for switches)	-	1000	20% Discount to BIS
Clause No -24.1.4(for automatic control)	-	1000	20% Discount to BIS
Clause No -24.1.5(for innterconnection couplers)	-	1000	20% Discount to BIS
Clause No -24.4(plug and socket)	-	1000	20% Discount to BIS
Clause No -25.8, Table no -11(conductor resistance)	-	1000	20% Discount to BIS
Clause No -25.5(dimension for pins)	-	1000	20% Discount to BIS
Clause No -27.6(for circuit board)	-	1000	20% Discount to BIS
Clause No -29.2(comparative tracking index)	-	1000	20% Discount to BIS
Clause No -29.3.3(dry heat test)	-	1000	20% Discount to BIS
Clause No -30.2.1(glow wire test)	-	1500	20% Discount to BIS
Clause No -30.101("incorporate combustible material")	-	1000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	1500	20% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	20% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	20% Discount to BIS
18(ENDURANCE)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1500	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields)

7479

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

Corrugated Aluminum Sheet

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	1500	-
4(SUPPLY OF MATERIAL)	-	0	-
5(PROFILE)	-	0	-
6(MATERIAL)	-	7000	-
7.2(WIDTH)	-	1000	-
7.3(LENGTH)	-	1000	-
7.4(SQUARENESS)	-	1000	-
7.5(Depth and Pitch of the Corrugation)	-	1000	-
8(FINISH)	-	1300	-
9(MARKING)	-	200	-

-
Included w.e.f 13.02.2025

7480

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	200	-
8(Dimension and Tolerance)	-	300	-
9.1 - 1(Copper)	-	400	-
9.1 - 1(Arsenic)	-	400	-
9.1 - 1(Iron)	-	400	-
9.1 - 1(Lead)	-	400	-
9.1 - 1(Nickel)	-	400	-
9.1 - 1(Tin)	-	300	-
9.1 - 1(Phosphorus)	-	300	-
9.1 - 1(Total impurities)	-	1000	-
10.1.1 - 2(Tensile Test)	-	600	-
10.1.1 - 2(0.2 Proof stress)	-	500	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	400	-
9.1 - 1(Manganese)	-	300	-
9.1 - 1(Aluminium)	-	300	-
9.1 - 1(Zinc)	-	300	-
10.2(Flattening Test)	-	500	-
10.3(Drift Expanding Test)	-	500	-
10.5(Microscopic Examination)	-	1000	-
10.6(Hydrogen Embrittlement Test)	-	1200	-
11.1(Residue Test Or cleanliness test)	-	1200	-
Cl-11.2(Residue Test Or cleanliness test)	-	1200	-
7(Freedom from defect)	-	500	-
8(Dimension and Tolerance)	-	450	-
9.1 - 1(Copper)	-	300	-
9.1 - 1(Arsenic)	-	250	-
9.1 - 1(Iron)	-	300	-
9.1 - 1(Lead)	-	300	-
9.1 - 1(Nickel)	-	300	-
9.1 - 1(Tin)	-	300	-
9.1 - 1(Phosphorus)	-	300	-
9.1 - 1(Total impurities)	-	700	-
10.1.1 - 2(Tensile Test)	-	700	-
10.1.1 - 2(0.2 Proof stress)	-	650	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	500	-
9.1 - 1(Manganese)	-	250	-
9.1 - 1(Aluminium)	-	250	-
9.1 - 1(Zinc)	-	250	-
10.2(Flattening Test)	-	400	-
10.3(Drift Expanding Test)	-	500	-
10.5(Microscopic Examination)	-	1000	-
10.6(Hydrogen Embrittlement Test)	-	1200	-
11.1(Residue Test Or cleanliness test)	-	800	-
Cl-11.2(Residue Test Or cleanliness test)	-	750	-
7(Freedom from defect)	-	0	-
8(Dimension and Tolerance)	-	0	-
9.1 - 1(Copper)	-	0	-
9.1 - 1(Arsenic)	-	0	-
9.1 - 1(Iron)	-	0	-
9.1 - 1(Lead)	-	0	-
9.1 - 1(Nickel)	-	0	-
9.1 - 1(Tin)	-	0	-
9.1 - 1(Phosphorus)	-	0	-
9.1 - 1(Total impurities)	-	0	-
10.1.1 - 2(Tensile Test)	-	0	-
10.1.1 - 2(0.2 Proof stress)	-	0	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	0	-
9.1 - 1(Manganese)	-	0	-
9.1 - 1(Aluminium)	-	0	-
9.1 - 1(Zinc)	-	0	-
10.2(Flattening Test)	-	0	-
10.3(Drift Expanding Test)	-	0	-
10.5(Microscopic Examination)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	0	-
11.1(Residue Test Or cleanliness test)	-	0	-
Cl-11.2(Residue Test Or cleanliness test)	-	0	-

-
Included w.e.f 22.07.2025 Excluding hydrostatic test pneumatic test eddy current test

7481

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

AS PER TABLE 1

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	100	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	500	-
Cl. 4 (b)(Condition - IS 737)	-	100	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	100	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	250	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	100	-
Cl. 4 (g)(Packing Mode - IS 737)	-	100	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	250	-
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	4500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	800	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Al - IS 504)	-	1000	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	2000	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	2500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	-
Cl. 8.2(Bend Test - IS 1599)	-	1500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	100	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	2500	-
Cl. 11(Selection of Test Samples - IS 737)	-	100	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	100	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	100	-
Cl. 12(Retests - IS 737/ IS 10259)	-	50	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	100	-
Cl. 13.1(Marking - IS 737)	-	500	-
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	0	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Al - IS 504)	-	0	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	0	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	0	-
Cl. 8.2(Bend Test - IS 1599)	-	0	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	0	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	-
Cl. 12(Retests - IS 737/ IS 10259)	-	0	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	0	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	0	-
Cl. 7(Al - IS 504)	-	0	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	0	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	0	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	0	-
Cl. 8.2(Bend Test - IS 1599)	-	0	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	0	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	0	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	0	-
Cl. 12(Retests - IS 737/ IS 10259)	-	0	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-

30 Mar, 2027

-
Included w.e.f 28.03.2025

7482

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

ALL

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	14900	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	14900	-
Cl. 4 (b)(Condition - IS 737)	-	14900	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	14900	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	14900	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	14900	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	14900	-
Cl. 4 (g)(Packing Mode - IS 737)	-	14900	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	14900	-
Cl. 6(Freedom from Defects - IS 737)	-	14900	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14900	-
Cl. 7(Al - IS 504)	-	14900	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	14900	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	14900	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	14900	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	14900	-
Cl. 8.2(Bend Test - IS 1599)	-	14900	-
Cl. 9(Condition - IS 737/ IS 5052)	-	14900	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	14900	-
Cl. 11(Selection of Test Samples - IS 737)	-	14900	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	14900	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	14900	-
Cl. 12(Retests - IS 737/ IS 10259)	-	14900	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	14900	-
Cl. 13.1(Marking - IS 737)	-	14900	-
Cl. 4(Ordering Information - IS 737)	-	-	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	-	-
Cl. 4 (b)(Condition - IS 737)	-	-	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	-	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	-	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	-	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	-	-
Cl. 4 (g)(Packing Mode - IS 737)	-	-	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	-	-
Cl. 6(Freedom from Defects - IS 737)	-	-	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	-	-
Cl. 7(Al - IS 504)	-	-	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	-	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	-	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	-	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	-	-
Cl. 8.2(Bend Test - IS 1599)	-	-	-
Cl. 9(Condition - IS 737/ IS 5052)	-	-	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	-	-
Cl. 11(Selection of Test Samples - IS 737)	-	-	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	-	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	-	-
Cl. 12(Retests - IS 737/ IS 10259)	-	-	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	-	-
Cl. 13.1(Marking - IS 737)	-	-	-

25 Feb, 2027

-
-

7483

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	500	-
Cl-9(Ultimate tensile strength and elongation)	-	750	-
Cl-10.1(Resistivity)	-	1000	-
Cl-10.1(electrical conductivity)	-	1000	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	500	-
Cl-13(Finish and freedom from defects)	-	200	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	750	-
CL 11(DIMENSIONS)	-	500	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	200	-
9(Elongation)	-	750	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	2000	-
Cl-6.2(Chemical analysis of the material)	-	2000	-
Cl-7.1(General condition for delivery and inspection relating)	-	1500	-
Cl-9(Ultimate tensile strength and elongation)	-	750	-
Cl-10.1(Resistivity)	-	2000	-
Cl-10.1(electrical conductivity)	-	2000	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	2000	-
Cl-11(Dimensions)	-	500	-
Cl-13(Finish and freedom from defects)	-	500	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	750	-
CL 11(DIMENSIONS)	-	500	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	500	-
9(Elongation)	-	750	-

-
Included w.e.f. 24.12.2024

7484

BIS, Eastern Regional Laboratory (ERL)

None

IS 16581 (2018)

High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives - Specification

For all type

Rs.6550/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (i) (Dimensions, mm a) Length)	-
5.1 Table 1 (i) (Dimensions, mm b) Width)	-
5.1 Table 1 (iii) (Picks per dm)	-
5.1 Table 1 (iv) (Mass of fabric, g/m2)	-
5.1 Table 1 (v) (Average breaking strength of fabric, Min [Raveled strip method, 200 mm × 50 mm1), N²) (kgf)]:)	-
5.1 Table 1 (vi) (Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-
5.1 Table 1 (vii) (Elongation at break of fabric (Raveled strip method), percent :)	-
5.1 Table 1 (v) (Average breaking strength of fabric, Min [Raveled strip method, 200 mm × 50 mm1), N²) (kgf)]: a) Length-wise b) Width-wise)	-
5.1 Table 1 (ii) (Ends per dm)	-
5.1 Table 1 (iii) (Picks per dm)	-
5.1 Table 1 (iv) (Mass of fabric, g/m2)	-
5.1 Table 1 (vi) (Minimum breaking strength of bottom seam (Strip method), N²) (kgf), Min)	-
5.1 Table 1 (vii) (Elongation at break of fabric (Raveled strip method), percent :)	-
6 (PRINTING, PACKING AND MARKING)	-
6 (PRINTING, PACKING AND MARKING)	-

-
Complete

7485

CIPET, Hyderabad

6111634

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

CPVC fittings

164250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	500	FOR BIS 25 % DISCOUNT
3.2(Nominal Outside Diameter)	-	500	FOR BIS 25 % DISCOUNT
3.3(Mean Inside Diameter of Socket at Entry)	-	500	FOR BIS 25 % DISCOUNT
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	FOR BIS 25 % DISCOUNT
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	FOR BIS 25 % DISCOUNT
3.5(Out-of-Roundness (Ovality))	-	500	FOR BIS 25 % DISCOUNT
3.6(Nominal Wall Thickness)	-	500	FOR BIS 25 % DISCOUNT
3.7(Minimum Wall Thickness)	-	500	FOR BIS 25 % DISCOUNT
3.8(Tolerance)	-	500	FOR BIS 25 % DISCOUNT
3.9(Working Pressure)	-	0	FOR BIS 25 % DISCOUNT
3.1(Standard Dimension Ratio)	-	0	FOR BIS 25 % DISCOUNT
3.11(Type Tests)	-	15800	FOR BIS 25 % DISCOUNT
3.11(Acceptance Tests)	-	850	FOR BIS 25 % DISCOUNT
6(Composition)	-	16900	FOR BIS 25 % DISCOUNT
7(Dimensions of fitting)	-	500	FOR BIS 25 % DISCOUNT
8.2(Opacity)	-	700	FOR BIS 25 % DISCOUNT
8.1(Visual Appearance)	-	500	FOR BIS 25 % DISCOUNT
8.3(Stress Relief Test)	-	700	FOR BIS 25 % DISCOUNT
8.4(Vicat softening Temperature)	-	1100	FOR BIS 25 % DISCOUNT
8.5(Density)	-	700	FOR BIS 25 % DISCOUNT
8.6(Effect on water)	-	2000	FOR BIS 25 % DISCOUNT
9(Mechanical Properties)	-	127150	FOR BIS 25 % DISCOUNT
11(Marking)	-	500	FOR BIS 25 % DISCOUNT
Cl-6.2.2(Compound Chlorine Content)	-	16900	FOR BIS 25 % DISCOUNT
Cl-6.2.5(Verification of the Malfunction Temperature)	-	16000	FOR BIS 25 % DISCOUNT
Cl-9.1(Hydrostatic Characteristics)	-	16650	FOR BIS 25 % DISCOUNT
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	FOR BIS 25 % DISCOUNT
3.1(Nominal Size(DN))	-	0	-
3.2(Nominal Outside Diameter)	-	0	-
3.3(Mean Inside Diameter of Socket at Entry)	-	0	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	0	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	0	-
3.5(Out-of-Roundness (Ovality))	-	0	-
3.6(Nominal Wall Thickness)	-	0	-
3.7(Minimum Wall Thickness)	-	0	-
3.8(Tolerance)	-	0	-
3.9(Working Pressure)	-	0	-
3.1(Standard Dimension Ratio)	-	0	-
3.11(Type Tests)	-	0	-
3.11(Acceptance Tests)	-	0	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.2(Opacity)	-	0	-
8.1(Visual Appearance)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	0	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	0	-
Cl-9.1(Hydrostatic Characteristics)	-	0	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
3.1(Nominal Size(DN))	-	0	-
3.2(Nominal Outside Diameter)	-	0	-
3.3(Mean Inside Diameter of Socket at Entry)	-	0	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	0	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	0	-
3.5(Out-of-Roundness (Ovality))	-	0	-
3.6(Nominal Wall Thickness)	-	0	-
3.7(Minimum Wall Thickness)	-	0	-
3.8(Tolerance)	-	0	-
3.9(Working Pressure)	-	0	-
3.1(Standard Dimension Ratio)	-	0	-
3.11(Type Tests)	-	0	-
3.11(Acceptance Tests)	-	0	-
6(Composition)	-	0	-
7(Dimensions of fitting)	-	0	-
8.2(Opacity)	-	0	-
8.1(Visual Appearance)	-	0	-
8.3(Stress Relief Test)	-	0	-
8.4(Vicat softening Temperature)	-	0	-
8.5(Density)	-	0	-
8.6(Effect on water)	-	0	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	0	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	0	-
Cl-9.1(Hydrostatic Characteristics)	-	0	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-

23 Feb, 2027

-
Included.w.e.f.30.01.2025

7486

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	500	20% Discount to BIS
31(Resistance to rusting)	-	1000	20% Discount to BIS
30.2.4(Resistance to heat and fire)	-	1000	20% Discount to BIS
30.2(Resistance to heat and fire)	-	1000	20% Discount to BIS
30.1(Resistance to heat and fire)	-	1000	20% Discount to BIS
29.3(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.2(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.2(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
28.2 to 28.4(Screws and connections)	-	1000	20% Discount to BIS
28.1, Table No.-14(Screws and connections)	-	1000	20% Discount to BIS
27.6(Provision for earthing)	-	1000	20% Discount to BIS
27.5(Provision for earthing)	-	1000	20% Discount to BIS
27.1 to 27.4(Provision for earthing)	-	1000	20% Discount to BIS
26.10 & 26.11(Terminals for external conductors)	-	1000	20% Discount to BIS
26.9(Terminals for external conductors)	-	1000	20% Discount to BIS
26.1 to 26.8(Terminals for external conductors)	-	1000	20% Discount to BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.15(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.14(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.4(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.3(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.2(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.1(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
24.101 to 24.103(Components)	-	500	20% Discount to BIS
24.2 to 24.6(Components)	-	500	20% Discount to BIS
24.1(Components)	-	500	20% Discount to BIS
23.101 to 23.102(Internal wiring)	-	500	20% Discount to BIS
23.6 to 23.10(Internal wiring)	-	500	20% Discount to BIS
23.5(Internal wiring)	-	500	20% Discount to BIS
23.4(Internal wiring)	-	500	20% Discount to BIS
23.3(Internal wiring)	-	500	20% Discount to BIS
23.1 & 23.2(Internal wiring)	-	500	20% Discount to BIS
22.101 to 22.114(Constructions)	-	500	20% Discount to BIS
22.13 to 22.48(Constructions)	-	500	20% Discount to BIS
22.12(Constructions)	-	500	20% Discount to BIS
22.11(Constructions)	-	500	20% Discount to BIS
22.11(Constructions)	-	500	20% Discount to BIS
22.7 to 22.10(Constructions)	-	500	20% Discount to BIS
22.6(Constructions)	-	500	20% Discount to BIS
22.5(Constructions)	-	500	20% Discount to BIS
22.4(Constructions)	-	500	20% Discount to BIS
22.3(Constructions)	-	500	20% Discount to BIS
22.2(Constructions)	-	500	20% Discount to BIS
22.1(Constructions)	-	500	20% Discount to BIS
21.2(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
21.1(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
20.2(Stability and mechanical hazards)	-	1000	20% Discount to BIS
20.1(Stability and mechanical hazards)	-	1000	20% Discount to BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
16.3(Insulation resistance test)	-	1000	20% Discount to BIS
16.3(Electric strength test)	-	1000	20% Discount to BIS
16.1 & 16.2(Leakage current test)	-	1000	20% Discount to BIS
15.102(Moisture resistance)	-	1000	20% Discount to BIS
15.102(Moisture resistance)	-	1000	20% Discount to BIS
15.101(Moisture resistance)	-	1000	20% Discount to BIS
15.3(Moisture resistance)	-	1000	20% Discount to BIS
15.2(Moisture resistance)	-	1000	20% Discount to BIS
15.1(Moisture resistance)	-	1000	20% Discount to BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	20% Discount to BIS
13.3 and Table No.- 4(Electric strength test)	-	1000	20% Discount to BIS
13.1, 13.2(Leakage current test)	-	1000	20% Discount to BIS
11.1 to 11.8, Table No.-3(Heating)	-	1000	20% Discount to BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	20% Discount to BIS
8.1.5(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.4(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.3(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.2(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	20% Discount to BIS
7.14(Legibility & Durability of Markings test)	-	1000	20% Discount to BIS
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	20% Discount to BIS
32(Radiation, toxicity and similar hazards)	-	1000	20% Discount to BIS
31(Resistance to rusting)	-	1000	20% Discount to BIS
30.2.4(Resistance to heat and fire)	-	1000	20% Discount to BIS
30.2(Resistance to heat and fire)	-	1000	20% Discount to BIS
30.1(Resistance to heat and fire)	-	1000	20% Discount to BIS
29.3(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.2(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.2(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	20% Discount to BIS
28.2 to 28.4(Screws and connections)	-	1000	20% Discount to BIS
28.1, Table No.-14(Screws and connections)	-	1000	20% Discount to BIS
27.6(Provision for earthing)	-	1000	20% Discount to BIS
27.5(Provision for earthing)	-	1000	20% Discount to BIS
27.1 to 27.4(Provision for earthing)	-	1000	20% Discount to BIS
26.10 & 26.11(Terminals for external conductors)	-	1000	20% Discount to BIS
26.9(Terminals for external conductors)	-	1000	20% Discount to BIS
26.1 to 26.8(Terminals for external conductors)	-	1000	20% Discount to BIS
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.15(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.14(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.4(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.3(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.2(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
25.1(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
24.101 to 24.103(Components)	-	500	20% Discount to BIS
24.2 to 24.6(Components)	-	500	20% Discount to BIS
24.1(Components)	-	500	20% Discount to BIS
23.101 to 23.102(Internal wiring)	-	500	20% Discount to BIS
23.6 to 23.10(Internal wiring)	-	500	20% Discount to BIS
23.5(Internal wiring)	-	500	20% Discount to BIS
23.4(Internal wiring)	-	500	20% Discount to BIS
23.3(Internal wiring)	-	500	20% Discount to BIS
23.1 & 23.2(Internal wiring)	-	500	20% Discount to BIS
22.101 to 22.114(Constructions)	-	500	20% Discount to BIS
22.13 to 22.48(Constructions)	-	500	20% Discount to BIS
22.12(Constructions)	-	500	20% Discount to BIS
22.11(Constructions)	-	500	20% Discount to BIS
22.11(Constructions)	-	500	20% Discount to BIS
22.7 to 22.10(Constructions)	-	500	20% Discount to BIS
22.6(Constructions)	-	500	20% Discount to BIS
22.5(Constructions)	-	500	20% Discount to BIS
22.4(Constructions)	-	500	20% Discount to BIS
22.3(Constructions)	-	500	20% Discount to BIS
22.2(Constructions)	-	500	20% Discount to BIS
22.1(Constructions)	-	500	20% Discount to BIS
21.2(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
21.1(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
20.2(Stability and mechanical hazards)	-	1000	20% Discount to BIS
20.1(Stability and mechanical hazards)	-	1000	20% Discount to BIS
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
16.3(Insulation resistance test)	-	1000	20% Discount to BIS
16.3(Electric strength test)	-	1000	20% Discount to BIS
16.1 & 16.2(Leakage current test)	-	1000	20% Discount to BIS
15.102(Moisture resistance)	-	1000	20% Discount to BIS
15.102(Moisture resistance)	-	1000	20% Discount to BIS
15.101(Moisture resistance)	-	1000	20% Discount to BIS
15.3(Moisture resistance)	-	1000	20% Discount to BIS
15.2(Moisture resistance)	-	1000	20% Discount to BIS
15.1(Moisture resistance)	-	1000	20% Discount to BIS
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	20% Discount to BIS
13.3 and Table No.- 4(Electric strength test)	-	1000	20% Discount to BIS
13.1, 13.2(Leakage current test)	-	1000	20% Discount to BIS
11.1 to 11.8, Table No.-3(Heating)	-	1000	20% Discount to BIS
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	20% Discount to BIS
8.1.5(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.4(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.3(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1.2(Protection against access to live parts)	-	1000	20% Discount to BIS
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	20% Discount to BIS
7.14(Legibility & Durability of Markings test)	-	500	20% Discount to BIS
7.1 to 7.13, 7.15, 7.16(Marking)	-	500	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% Discount to BIS
19.11.4.7(Harmonics)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

7487

Shriram Research Institute

6104206

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

Type 1 & Type 2

10800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	100	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	Moisture
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	400	Crude protein
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	450	Crude fat
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	550	Crude Fibre
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	550	Acid insoluble ash
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	300	Salt
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	250	Calcium
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	750	Total phosphorus
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	350	Available phosphorus
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	350	Urea
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1250	Vitamin A
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	Vitamin D3
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	Vitamin E
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1500	Aflatoxin B1
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	750	Cadmium
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	750	Sulphur
Cl no.4.2(Ingredients)	-	0	NA
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	Moisture
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	400	Crude Protein
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	450	Crude fat
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	550	Crude fibre
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	Acid insoluble ash
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	300	Salt
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	750	Total phosphorus
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	250	Calcium
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	350	Available phosphorus
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	350	Urea
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1250	Vitamin A
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1000	Vitamin D3
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1000	Vitamin E
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	1500	Aflatoxin B1
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	750	Cadmium
4.1(General)	-	100	Description
Cl no.4.1(General)	-	100	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	400	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	450	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	550	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	550	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	300	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	250	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	750	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	350	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	350	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1250	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1500	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	750	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	750	-
Cl no.4.2(Ingredients)	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	400	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	450	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	550	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	300	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	750	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	250	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	350	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	350	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1250	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	1500	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	750	-
4.1(General)	-	100	-
Cl no.4.1(General)	-	99.98	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	400	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	450	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	549.99	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	550	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	300	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	250	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	750	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	350	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	350	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1250	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1500	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	750	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	750	-
Cl no.4.2(Ingredients)	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	400	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	450	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	550	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	300	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	750	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	250	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	350	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	350	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1250	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	1500	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	750	-
4.1(General)	-	100	-
Cl no.4.1(General)	-	100	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	499.99	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	400	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	450	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	550	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	500	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	300	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	250	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	750	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	350	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	350	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1250	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1500	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	750	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	750	-
Cl no.4.2(Ingredients)	-	0	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	400	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	450	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	550	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	550	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	300	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	750	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	250	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	350	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	350	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1250	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1000	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1000	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	1500	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	750	-
4.1(General)	-	100	-

-
Included w.e.f.28.03.2025

7488

BIS, Central Laboratory (CL)

None

IS 3993 (1993)

Trays, instruments - Specification (Second Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & 4.2 (C - IS 228)	-
4.1 & 4.2 (Si - IS 228)	-
4.1 & 4.2 (Mn - IS 228)	-
4.1 & 4.2 (Ni - IS 228)	-
4.1 & 4.2 (Cr - IS 228)	-
4.1 & 4.2 (S - IS 228)	-
4.1 & 4.2 (P - IS 228)	-
6.1 & 6.4 (Manufacture, workmanship and finish of Glass Trays - IS 3993)	-
6.1 & 6.3 (Manufacture, workmanship and finish of Enamelled Iron Trays - IS 3993)	-
6.1 & 6.2 (Manufacture, workmanship and finish of Stainless Steel Tray)	-
5.2 -Table-1 (Length -A - IS 3993)	-
5.2 -Table-1 (Width -B - IS 3993)	-
5.2 -Table-1 (Height -C - IS 3993)	-
5.2 -Table-1 (Minimum no of Ribs - IS 3993)	-
5.2.1 (Thickness of enamel - IS 3993)	-
6.1 & 6.2 (Manufacture, workmanship and finish of Stainless Steel Tray)	-
6.1 & 6.3 (Manufacture, workmanship and finish of Enamelled Iron Trays - IS 3993)	-
6.1 & 6.4 (Manufacture, workmanship and finish of Glass Trays - IS 3993)	-
8 (MARKING)	-

-
-

7489

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	1000	-
6(Classification)	-	1000	-
5(Rating)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

7490

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

9011 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 .2(pH)	-	1750	--
Cl 5.4 (a)(Acidity)	-	605	--
Cl 5.4 (b)(Alkalinity)	-	605	--
Cl 5.4 Table 1 (i)(Organic Solids)	-	880	--
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	880	--
Cl 5.4 Table 1 (iii)(Sulphate)	-	1750	--
Cl 5.4 Table 1 (iv)(Chloride)	-	2340	--
Cl 5.4 Table 1 (v)(Suspended Matter)	-	880	--

14 Aug, 2027

-
Included w.e.f. 28.05.2019

7491

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

39820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	7525	No remarks
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	2145	No remarks
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	3040	No remarks
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	2340	No remarks
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	3990	No remarks
5.1, 6.1, Table 1(Total chlorides)	-	2340	No remarks
5.1, 6.1, Table 1(Loss on ignition)	-	1180	No remarks
6.2(moisture content)	-	2440	No remarks
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1950	No remarks
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	2820	No remarks
7.1, Table 1(Soundnes)	-	3510	No remarks

14 Aug, 2027

-
-

7492

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 12089 (1987)

Specification for granulated slag for the manufacture portland slag cement

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Physical State)	-	2340	No remarks
3.4.1(glass content )	-	7500	no
3.2(composition of granulated slag, Manganese Oxide)	-	1950	no
3.2(composition of granulated slag, Magnesium Oxide)	-	3040	no
3.2(composition of granulated slag, Sulphide Sulphur)	-	2340	no
3.3(percentages of major oxides)	-	11045	no
3.4(insoluble residue of dried samples)	-	2340	no

14 Aug, 2027

-
-

7493

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 8042 (2015)

White portland cement - Specification (Third Revision)

40010 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10345	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	2340	No Remarks
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	No Remarks
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No Remarks
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No Remarks
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	No Remarks
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 -Table 2- i(Fineness 4031 Part 2)	-	1950	No Remarks
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	No Remarks
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days
6 -Table 2- vi(Degree of whiteness-Annex B)	-	2340	No Remarks

14 Aug, 2027

-
-

7494

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

39620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10345	--
4.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	No remarks
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No remarks
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No remarks
4.1 - Table - 1 v(Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	5380	No remarks
4.1 - Table - 1 vi(Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-	5380	No remarks
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	No remarks
5.1(Fineness 4031 Part 2)	-	1950	No remarks
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No remarks
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	No remarks
5.3 a)(Setting Time Initial- 4031 Part 5)	-	875	No remarks
5.3 b)(Setting Time Final- 4031 Part 5)	-	875	No remarks
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No remarks
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2660	No remarks
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2820	No remarks
5.6(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days Strength

14 Aug, 2027

-
-

7495

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

36460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10345	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	No remarks
5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No remarks
5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No remarks
5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	No remarks
6.1(Fineness 4031 Part 2)	-	1950	No remarks
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No remarks
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	No remarks
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	No remarks
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	No remarks
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	2000	No remarks
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2270	No remarks
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	8740	For 1day & 3 days

14 Aug, 2027

-
-

7496

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

39820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	7525	No Remarks
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2145	No Remarks
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3810	No Remarks
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	3040	No Remarks
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	2340	No Remarks
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	3990	No Remarks
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	2340	No Remarks
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1180	No Remarks
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	2440	No Remarks
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1950	No Remarks
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2820	No Remarks
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3510	No Remarks
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3810	No Remarks
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	3510	No Remarks

14 Aug, 2027

-
-

7497

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

17723 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	No Remarks
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	No Remarks
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days strength
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	No Remarks

14 Aug, 2027

-
-

7498

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	No Remarks
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	No Remarks
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	No Remarks

14 Aug, 2027

-
-

7499

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 455 (2015)

Portland slag cement - Specification

31620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 Table 1 i(Fineness IS 4031(Part 2))	-	1950	No Remarks
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1950	No Remarks
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	3510	No Remarks
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	875	No Remarks
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	875	No Remarks
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	2000	No Remarks
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	2270	No Remarks
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	2660	No Remarks
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	14240	For 3, 7 & 28 days

14 Aug, 2027

-
-

7500

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 16353 (2015)

Portland Cement Clinker - Specification

44780 View breakup
Rs 30410 /-, Cement preparation charges: Procured Gypsum – Rs 10560 /- Customers Gypsum – Rs 10320 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-	10345	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio.
Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
Clause 5 Table 1(C3S, percent by mass)	-	10345	-
Clause 5 Table 1(C3A, percent by mass)	-	5380	-
Clause 5 Table 1(C3S+C2S, percent by mass)	-	12490	-
Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3))	-	2340	No Remarks
Clause 5 Table 1(Free lime)	-	2820	No Remarks
Clause 5 Table 1(Chloride content)	-	2340	No Remarks
Clause 5 Table 1(Magnesia)	-	3040	No Remarks
Clause 5 Table 1(Alkali content)	-	1950	No Remarks
Clause 5 Table 1(Total loss on ignition)	-	1180	No Remarks
Clause 5 Table 1(Insoluble residue)	-	2340	No Remarks
6.1 IS 4031(Part 2)(Fineness)	-	19501950	--
6.1 Table 2 i) a) IS 4031 (Part 3)(Soundness by Le-Chatelier method)	-	1460	-
6.1 Table 2 i) b) IS 4031 (Part 3)(Soundness by Autoclave test method)	-	3510	--
6.1 Table 2 ii) a) IS 4031 (Part 5)(Initial Setting time)	-	875	--
6.1 Table 2 ii) b) IS 4031 (Part 5)(Final Setting time)	-	875	--
6.1 Table 2 iii) a) IS 4031 (Part 6)(Compressive Strength at 72±1 h)	-	2000	--
6.1 Table 2 iii) b) IS 4031 (Part 6)(Compressive Strength at 168±2 h)	-	2270	--
6.1 Table 2 iii) c) IS 4031 (Part 6)(Compressive Strength at 672±4 h)	-	2660	--
6.2 Table 3 i) (Granulometric composition of clinker(Size <5 mm))	-	2230	--
6.2 Table 3 ii) (Granulometric composition of clinker(Size 5-50 mm))	-	2230	--
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-	2230	--

14 Aug, 2027

-
Included w.e.f. 28.05.2019

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number