BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7501

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

36460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10345	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	No remarks
5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No remarks
5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No remarks
5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	No remarks
6.1(Fineness 4031 Part 2)	-	1950	No remarks
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No remarks
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	No remarks
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	No remarks
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	No remarks
6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-	2000	No remarks
6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2270	No remarks
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	8740	For 1day & 3 days

14 Aug, 2027

-
-

7502

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

39820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	7525	No Remarks
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2145	No Remarks
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3810	No Remarks
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	3040	No Remarks
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	2340	No Remarks
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	3990	No Remarks
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	2340	No Remarks
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1180	No Remarks
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	2440	No Remarks
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1950	No Remarks
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2820	No Remarks
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3510	No Remarks
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3810	No Remarks
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	3510	No Remarks

14 Aug, 2027

-
-

7503

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

17723 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	No Remarks
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	No Remarks
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days strength
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	No Remarks

14 Aug, 2027

-
-

7504

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

32100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 -Table 2- i(Fineness 4031 Part 2)	-	1950	No Remarks
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2820	No Remarks
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	875	No Remarks

14 Aug, 2027

-
-

7505

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 455 (2015)

Portland slag cement - Specification

31620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	3040	No Remarks
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1180	No Remarks
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	2340	No Remarks
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
7 Table 1 i(Fineness IS 4031(Part 2))	-	1950	No Remarks
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1950	No Remarks
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	3510	No Remarks
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	875	No Remarks
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	875	No Remarks
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	2000	No Remarks
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	2270	No Remarks
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	2660	No Remarks
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	14240	For 3, 7 & 28 days

14 Aug, 2027

-
-

7506

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 16353 (2015)

Portland Cement Clinker - Specification

44780 View breakup
Rs 30410 /-, Cement preparation charges: Procured Gypsum – Rs 10560 /- Customers Gypsum – Rs 10320 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-	10345	These testing charges are for determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above mentioned ratio.
Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
Clause 5 Table 1(C3S, percent by mass)	-	10345	-
Clause 5 Table 1(C3A, percent by mass)	-	5380	-
Clause 5 Table 1(C3S+C2S, percent by mass)	-	12490	-
Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3))	-	2340	No Remarks
Clause 5 Table 1(Free lime)	-	2820	No Remarks
Clause 5 Table 1(Chloride content)	-	2340	No Remarks
Clause 5 Table 1(Magnesia)	-	3040	No Remarks
Clause 5 Table 1(Alkali content)	-	1950	No Remarks
Clause 5 Table 1(Total loss on ignition)	-	1180	No Remarks
Clause 5 Table 1(Insoluble residue)	-	2340	No Remarks
6.1 IS 4031(Part 2)(Fineness)	-	19501950	--
6.1 Table 2 i) a) IS 4031 (Part 3)(Soundness by Le-Chatelier method)	-	1460	-
6.1 Table 2 i) b) IS 4031 (Part 3)(Soundness by Autoclave test method)	-	3510	--
6.1 Table 2 ii) a) IS 4031 (Part 5)(Initial Setting time)	-	875	--
6.1 Table 2 ii) b) IS 4031 (Part 5)(Final Setting time)	-	875	--
6.1 Table 2 iii) a) IS 4031 (Part 6)(Compressive Strength at 72±1 h)	-	2000	--
6.1 Table 2 iii) b) IS 4031 (Part 6)(Compressive Strength at 168±2 h)	-	2270	--
6.1 Table 2 iii) c) IS 4031 (Part 6)(Compressive Strength at 672±4 h)	-	2660	--
6.2 Table 3 i) (Granulometric composition of clinker(Size <5 mm))	-	2230	--
6.2 Table 3 ii) (Granulometric composition of clinker(Size 5-50 mm))	-	2230	--
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-	2230	--

14 Aug, 2027

-
Included w.e.f. 28.05.2019

7507

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 12600 (1989)

Portland cement, low heat - specification

39620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 - Table - 1 i(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	5380	These testing charges are for determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
5.1 - Table - 1 ii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	2340	No Remarks
5.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No Remarks
5.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No Remarks
5.1 - Table - 1 v( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	1180	No Remarks
5.1 - Table - 1 note 2(Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-	1950	No Remarks
6.1(Fineness 4031 Part 2)	-	1950	No Remarks
6.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	1950	No Remarks
6.2.1(Expansion by Autoclave- 4031 Part 3)	-	3510	No Remarks
6.3 a)(Setting Time Initial- 4031 Part 5)	-	875	No Remarks
6.3 b)(Setting Time Final- 4031 Part 5)	-	875	No Remarks
6.4 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No Remarks
6.4 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No Remarks
6.4 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No Remarks
6.5(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3, 7 & 28 days
6.7 b)(Heat of Hydration- IS 4031 Part 9)	-	5950	Heat of Hydration charges per age

14 Aug, 2027

-
-

7508

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

51870 View breakup
Rs.15220/- for fine aggregate Rs.23720/- for Coarse aggregate

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	No Remarks
5.4.2(a)( Aggregates Impact Value)	-	3040	No Remarks
5.4.3(a)( Aggregate Abrasion Value)	-	4490	No Remarks
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	2340	No Remarks
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	2340	No Remarks
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	2340	No Remarks
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	2340	No Remarks
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	2340	No Remarks
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	2340	No Remarks
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	2340	No Remarks
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	2340	No Remarks
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	2340	No Remarks
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	2340	No Remarks
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	2340	No Remarks
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	2340	No Remarks
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	2340	No Remarks
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	2340	No Remarks
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	2340	No Remarks
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	2340	No Remarks
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	2340	No Remarks
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	2340	No Remarks
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	2340	No Remarks
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	2340	No Remarks
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	2340	No Remarks
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	2340	No Remarks
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	2340	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	2340	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	2340	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	2340	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	2340	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	2340	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	2340	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	3040	-
5.4.2(b)( Aggregates Impact Value)	-	3040	-
5.4.3(b)( Aggregate Abrasion Value)	-	4490	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1180	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1180	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	5320	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	5950	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	980	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2145	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	2145	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	2145	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	2145	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	1180	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	1180	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	5320	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	5950	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1740	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	2145	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	2145	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	2145	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	2145	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	2145	-
7.2(Bulk Density loose)	-	1180	-
7.2(Bulk Density Rodded)	-	1180	-

14 Aug, 2027

-
-

7509

National Council for Cement and Building Materials (NCCBM), Hyderabad

6114835

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

39620 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10345	These testing charges are for the determination of CaO, SO3, SiO2, Fe2O3 & Al2O3 to calculate the above-mentioned ratio.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	5380	These testing charges are for the determination of Fe2O3 & Al2O3 to calculate the above mentioned ratio.
6.1 Table-2 iii.(Insoluble residue)	-	2340	No remarks
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	3040	No remarks
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	2340	No remarks
6.1 Table-2 vi(Loss on ignition)	-	1180	No remarks
6.1 Table-2 vii(Chloride content)	-	2340	No remarks
6.1 Table-2 viii(Alkali content)	-	1950	No remarks
7 Table-3 i.(Fineness)	-	1950	No remarks
7 Table-3 ii a(Expansion by Le Chatelier)	-	1950	No remarks
7 Table-3 ii b(Expansion by Autoclave)	-	3510	No remarks
7 Table-3 iii a(Setting Time Initial)	-	875	No remarks
7 Table-3 iii b(Setting Time Final)	-	875	No remarks
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2000	No remarks
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2270	No remarks
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2660	No remarks
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	14240	For 3 days, 7days & 28days
5.1.1 Table 1 Sl. No. iv(Calcium Carbonate)	-	2820	--

14 Aug, 2027

-
-

7510

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	100	15% Discount to BIS
7(Marking/ Marking & Instructions)	-	200	15% Discount to BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	15% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	200	15% Discount to BIS
10(Power Input & Current)	-	500	15% Discount to BIS
11(Temperature Rise/Heating)	-	1000	15% Discount to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	15% Discount to BIS
14(Transient Over Voltage)	-	1000	15% Discount to BIS
15(Moisture Resistance)	-	4000	15% Discount to BIS
16(Leakage Current and Electric Strength)	-	500	15% Discount to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	15% Discount to BIS
18(Endurance)	-	500	15% Discount to BIS
19(Abnormal Operation)	-	1000	15% Discount to BIS
20(Stability & Mechanical Hazards)	-	500	15% Discount to BIS
21(Mechanical strength)	-	500	15% Discount to BIS
22(Construction)	-	1000	15% Discount to BIS
23(Internal wiring)	-	500	15% Discount to BIS
24(Component)	-	1000	15% Discount to BIS
25(Supply Connection & External Flexible Cables and Cords)	-	500	15% Discount to BIS
26(Terminals For External Conductors)	-	500	15% Discount to BIS
27(Provision For Earthing)	-	500	15% Discount to BIS
28(Screws & Connection)	-	500	15% Discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	500	15% Discount to BIS
30(Resistance to Heat & Fire)	-	1000	15% Discount to BIS
31(Resistance to Rusting)	-	1000	15% Discount to BIS
32(Radiation ,Toxicity and similar hazards)	-	500	15% Discount to BIS
22.32(CONSTRUCTION)	-	500	15% Discount to BIS
6(Classification)	-	0	-
7(Marking/ Marking & Instructions)	-	0	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	0	-
9(Starting Of Motor Operated Appliances)	-	0	-
10(Power Input & Current)	-	0	-
11(Temperature Rise/Heating)	-	0	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	0	-
14(Transient Over Voltage)	-	0	-
15(Moisture Resistance)	-	0	-
16(Leakage Current and Electric Strength)	-	0	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability & Mechanical Hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
25(Supply Connection & External Flexible Cables and Cords)	-	0	-
26(Terminals For External Conductors)	-	0	-
27(Provision For Earthing)	-	0	-
28(Screws & Connection)	-	0	-
29(Clearances, Creepage Distances & Solid Insulation)	-	0	-
30(Resistance to Heat & Fire)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation ,Toxicity and similar hazards)	-	0	-
22.32(CONSTRUCTION)	-	0	-

31 Dec, 2026

-
Included w.e.f 01.01.2025 Exclusion : Cl 19.11.4.1 (Electrostatic discharges), Cl 19.11.4.2 (Radiated fields), Cl 19.11.4.3 (Fast transient bursts), Cl 19.11.4.4 (Surge immunity test), Cl 19.11.4.5 (Immunity to conducted discharges) , Cl 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl 19.11.4.7 (Harmonics) and Cl 24 (Component)

7511

National Test House (WR) - NTH, Mumbai

7107604

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(RATING)	-	500	-
7.4(Marking)	-	250	-
Cl. 6(Classification)	-	500	-
Cl. 7(Marking and instructions)	-	250	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
9(Starting, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1500	-
11(Heating, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1500	-
Cl.15(Moisture Resistance)	-	1500	-
Cl. 16(Leakage current and Electric strength)	-	1500	-
Cl.18(Endurance)	-	2000	-
Cl.19(Abnormal operation)	-	1500	-
20(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21(Mechanical Strength, IS 302-1)	-	500	-
Cl.22(Construction)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
Cl.24(Components)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	500	-
29(Clearances and Distances through Insulation, IS 302-1)	-	500	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	500	-
35(Temperature withstand test for bowl)	-	1000	-
36(Test for controls )	-	1000	-
37(Strength of Assembly )	-	1000	-
Cl 34(Operational Tests)	-	1000	-

24 Jul, 2025

-
Included w.e.f. 26.06.2024

7512

National Test House (WR) - NTH, Mumbai

7107604

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Sizes )	-	1000	-
4.1(Rated Voltage)	-	500	-
5.1(Rated frequency)	-	500	-
6.1(Design and General Construction)	-	1000	-
7.1(Design and General Construction)	-	1000	-
8.1(Design and General Construction)	-	1000	-
9(Design and General Construction)	-	1000	-
10.1(Starting )	-	1500	-
11.1(Interchangeability)	-	500	-
12(Silent Operation)	-	500	-
13.1(Marking)	-	1000	-
14.1 & 14.6(Power factor)	-	1500	-
14.2 & 15.1(Air Delivery)	-	6000	-
14.3.A(Temperature-Rise (for motors))	-	2000	-
14.3.B(Temperature-Rise (for regulators))	-	1000	-
14.3.B(Moistureproofness (for regulators only))	-	2000	-
14.5(Mechanical Endurance (for regulators only))	-	2000	-
14.7(ac leakage)	-	1000	-
14.8(High voltage test)	-	1000	-
14.9(Insulation-Resistance)	-	1000	-
14.1(Earthing continuity)	-	1000	-
14.11 & 15.1(Electrical Input)	-	2500	-
14.12 & 16(Fan Speed)	-	1000	-
Cl-16(Tolerances on ratings)	-	500	-
14.13(Flash Test)	-	500	-

24 Jul, 2025

-
Included w.e.f. 26.06.2024

7513

SKC COMPLIANCE LAB PRIVATE LIMITED, MAHADEVPURA

6170406

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	3000	-
6(Marking)	-	4000	-
"Cl.6.1 "(Marking)	-	1000	-
"Cl.6.2 "(BIS Certification Marking)	-	1000	-
6(Marking)	-	1000	-
5(Tests)	-	0	-
4(Requirements)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
6(Marking)	-	0	-
5(Tests)	-	0	-
4(Requirements)	-	0	-
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
6(Marking)	-	0	-
5(Tests)	-	0	-
4(Requirements)	-	0	-

24 May, 2028

-
Included.w.e.f.26.12.2024

7514

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
4(GENERAL REQUIREMENTS)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion CL 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

7515

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	500	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	500	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
6.1(MATERIALS : ARMGURING)	-	500	-
6.2(MATERIALS : ARMGURING)	-	500	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	500	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	500	-
8.1(CONSTRUCTION : CONDUCTOR)	-	500	-
8.2(CONSTRUCTION : CONDUCTOR)	-	500	-
9.1(INSULATION )	-	500	-
9.2(INSULATION : Thickness of Insulation)	-	1000	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	1000	-
9.4(INSULATION : Application of Insulation)	-	500	-
10.1(CORE IDENTIFICATION)	-	500	-
10.2(CORE IDENTIFICATION)	-	500	-
10.3(CORE IDENTIFICATION)	-	500	-
10.3.1(Arrangement of Marking)	-	500	-
11.1(LAYING UP OF CORES)	-	500	-
11.2(LAYING UP OF CORES)	-	500	-
12.1(INNER SHEATH)	-	500	-
12.2(INNER SHEATH)	-	500	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	1000	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	1000	-
13.1.1(ARMOURING : Application)	-	500	-
13.1.2(Armouring: Coverage )	-	1000	-
13.1.3(ARMOURING : Direction of lay )	-	500	-
13.1.4(ARMOURING : Application)	-	500	-
13.2(ARMOURING : Type of Armour)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(ARMOURING : Joints)	-	500	-
13.5.1(ARMOURING : Resistance)	-	1000	-
13.5.2(ARMOURING : Resistance)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(OUTER SHEATH)	-	500	-
14.2(OUTER SHEATH)	-	500	-
14.3(OUTER SHEATH : Colour )	-	500	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	1000	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	1000	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 d)4)(Hot deformation : Insulation )	-	1000	-
15.1 d)4)(Hot deformation : Sheath )	-	1000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2000	-
15.1 d)6)(Heat shock test- Insulation )	-	1000	-
15.1 d)6)(Heat shock test- sheath )	-	1000	-
15.1 d)7)(Thermal stability- insulation )	-	1000	-
15.1 d)7)(Thermal stability- Sheath )	-	1000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	-
15.1 e)(Insulation resistance test : IR Constant )	-	1000	-
15.1 f)(High voltage test ( water immersion test ))	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	-
16.1(DETAILS OF TESTS : General)	-	500	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	500	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	3000	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	3000	-
16.1(Temperature Index)	-	3000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	500	-
17.2(IDENTIFICATION : Cable Identification)	-	500	-
17.2.1(IDENTIFICATION : Cable Identification)	-	500	-
17.3(IDENTIFICATION : Cable Code)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1000	-
16.4(Flammability Test- Un affected portion)	-	1000	-
16.4(Flammability Test- Period of Burning)	-	1000	-
9.3(Minimum Thickness of Reduce core insulation)	-	1000	-
9.2(Thickness of Reduce core insulation)	-	1000	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	500	-
Cl No. 16.10(Smoke density test)	-	3000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	5000	-
Table 4(Copper purity test)	-	3000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	2000	-

11 Mar, 2028

-
-

7516

SKC COMPLIANCE LAB PRIVATE LIMITED, MAHADEVPURA

6170406

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

23520 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	750	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	2500	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(TRANSIENT OVERVOLTAGES)	-	500	-
15(MOISTURE RESISTANCE)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	2500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	750	-
21(MECHANICAL STRENGTH)	-	750	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	100	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	350	-
30(RESISTANCE TO HEAT AND FIRE)	-	100	-
31(RESISTANCE TO RUSTING)	-	100	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	0	-
Marking- IS 302-1(Marking- IS 302-1)	-	0	-
7.1(Marking- IS 302-2-15)	-	0	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.5(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.9(Marking- IS 302-1)	-	0	-
7.1O(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-2-15)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.12.1(Marking- IS 302-1)	-	0	-
7.12.3(Marking- IS 302-1)	-	0	-
7.12.5(Marking- IS 302-1)	-	0	-
7.12.6(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking- IS 302-2-15)	-	0	-
8(Protection Against Electric Shock, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
11(Heating, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	0	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	0	-
16(Leakage current as per Cl 16, IS 302-1)	-	0	-
16(electric strength as per Cl 16, IS 302-1)	-	0	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.1(Mechanical Strength, IS 302-1)	-	0	-
21.2(Mechanical Strength, IS 302-1)	-	0	-
22.1(Construction, IS 302-1)	-	0	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	0	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	0	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.1O(Internal Wiring, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	0	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	0	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	0	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	0	-
31(Resistance of Rusting, IS 302-1)	-	0	-

24 May, 2028

-
Included.w.e.f.26.12.2024 Exclusion Cl 22.16 (Automatic cord reel) Cl 22.32 (Oxygen bomb for rubber material) Cl 22.47 (Water pressure inlet) Cl Annex BB (Appliance for board ships) Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.7 (Harmonics)

7517

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 18663 (2024)

Note Sorting Machines- Specifications

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1)(General Requirements)	-	500	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.2 and subclauses of IS/IEC 62368-1)(Energy source classifications)	-	500	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.3 and subclauses of IS/IEC 62368-1)(Protection against energy sources)	-	500	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.4 and subclauses of IS/IEC 62368-1)(Safeguards)	-	500	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.5 and subclauses of IS/IEC 62368-1)("Explosion- Requirements ")	-	500	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.6 and subclauses of IS/IEC 62368-1)(Fixing of conductors- Requirements)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.7 and subclauses of IS/IEC 62368-1)(Equipment for direct insertion into mains socket-outlets)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.8 and subclausesof IS/IEC 62368-1)(Equipment containing coin / button cell batteries)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.9 and subclauses of IS/IEC 62368-1)(Likelihood of fire or shock due to entry of conductive objects)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 4.10 and subclauses of IS/IEC 62368-1)(Components requirements)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.2 and subclauses of IS/IEC 62368-1)(Classification and limits of electrical energy sources)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.3 and subclauses of IS/IEC 62368-1)(Protection against electrical energy sources)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1)(Insulation materials and requirements)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.5 and subclauses of IS/IEC 62368-1)(Components as safeguards)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.6 and subclauses of IS/IEC 62368-1)(Protective conductor)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.7 and subclauses of IS/IEC 62368-1)(Prospective touch voltage, touch current and protective conductor current.)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 5.8 and subclauses of IS/IEC 62368-1)(Backfeed safeguard in battery backed up supplies)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.1 of IS/IEC 62368-1)(Electrically-caused fire)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.2 and subclauses of IS/IEC 62368-1)(Classification of power sources (PS) and potential ignition sources (PIS).)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.3 and subclauses of IS/IEC 62368-1)(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.4 and subclauses of IS/IEC 62368-1)(Safeguards against fire under single fault conditions)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.5 and subclauses of IS/IEC 62368-1)(Internal and external wiring)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 6.6 and subclauses of IS/IEC 62368-1)(Safeguards against fire due to the connection of additional equipment)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 8, 8.1 to 8.12 and subclauses of IS/IEC 62368-1)(Mechanically-caused injury)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements (Cl 9, 9.1 to 9.6 and subclauses of IS/IEC 62368-1)(Thermal burn injury)	-	1500	10% discount to BIS
Cl 4.2 Safety requirements (Annex.B, B.1 to B.4 including its subclauses of IS/IEC 62368-1))(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	2000	10% discount to BIS
Cl 4.2 Safety requirements (Annex. D, D.1, D.2, D.3 of IS/IEC 62368-1)(Test generators)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex E, E.1, E.2, E.3 of IS/IEC 62368-1)(Test conditions for equipment containing audio amplifiers)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. F, F.1 to F.5 including its subclauses of IS/IEC 62368-1)(Equipment markings, instructions, and instructional safeguards)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1)(Components)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. H, H1 to H3 including its subclauses of IS/IEC 62368-1)(Criteria for telephone ringing signals .)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex I of IS/IEC 62368-1)(Overvoltage categories)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1)(Insulated winding wires for use without interleaved insulation)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. L .L1 to L.9 including its subclauses of IS/IEC 62368-1)(Disconnect devices)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1)(Equipment containing batteries and their protection circuits)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex.N of IS/IEC 62368-1)(Electrochemical potentials)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex.O of IS/IEC 62368-1)(Measurement of creepage distances and clearances)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements ( Annex.P, P.1 to P.4 and its subclauses of IS/IEC 62368-1)(Safeguards against conductive objects)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex.Q, Q.1 to Q.2 and its subclauses of IS/IEC 62368-1)(Circuits intended for interconnection with building wiring)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements ( Annex.S S.1 to S.5 and its subclauses of IS/IEC 62368-1)(Tests for resistance to heat and fire)	-	1000	10% discount to BIS
Cl 4.2 Safety requirements ( Annex T, T.1 to T.11 and its subclauses of IS/IEC 62368-1)(Mechanical strength tests)	-	2000	10% discount to BIS
Cl 4.2 Safety requirements ( Annex V, V.1 to V.2 and its subclauses of IS/IEC 62368-1)(Determination of accessible parts)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex X of IS/IEC 62368-1)(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1)(Construction requirements for outdoor enclosure)	-	500	10% discount to BIS
Cl-4.1, 6.2 Table-1 (i)(Objects not recognized as banknotes)	-	500	10% discount to BIS
Cl-4.1, 6.2 Table-1 (ii)(Suspect/counterfeit banknotes)	-	500	10% discount to BIS
Cl-4.1, 6.2 Table-1 (iii)(Banknotes that are not clearly authenticated)	-	500	10% discount to BIS
Cl-4.1, 6.2 Table-1 (iv) (a)(Banknotes that are identified as genuine and fit;)	-	500	10% discount to BIS
Cl-4.1, 6.2 Table-1 (iv) (b)(Banknotes that are identified as genuine and unfit)	-	500	10% discount to BIS
Cl-4.1, Table-2 (i)(Piece counting)	-	500	10% discount to BIS
Cl-4.1, Table-2 (ii)(Value counting)	-	500	10% discount to BIS
Cl-4.1, Table-2 (iii)(Authenticity determination)	-	500	10% discount to BIS
Cl-4.1, Table-2 (iv)(Fitness determination)	-	500	10% discount to BIS
Cl-4.1, Table-2 (v)(Sorting of banknotes)	-	500	10% discount to BIS
Cl-4.3, Table-3 (i)(Serial number recognition)	-	500	10% discount to BIS
Cl-4.3, Table-3 (ii)(Data storage and reproduction)	-	500	10% discount to BIS
Cl-6.1, Table-4 (i)(Marking and instructions)	-	500	10% discount to BIS
Cl-6.1, Table-4 (ii)(Protection against access to live parts)	-	2000	10% discount to BIS
Cl-6.1, Table-4 (iii)(Power input and current)	-	3000	10% discount to BIS
Cl-6.1, Table-4 (iv)(Heating)	-	4000	10% discount to BIS
Cl-6.1, Table-4 (v)(Creepage clearance and solid insulation)	-	1000	10% discount to BIS
Cl-6.1, Table-4 (vi)(Humidity conditioning)	-	3000	10% discount to BIS
Cl-6.1, Table-4 (vii)(Leakage current and electric strength at operating temperature)	-	1500	10% discount to BIS
Cl-6.1, Table-4 (viii)(Provision for earthing)	-	1500	10% discount to BIS
6.2.1(Speed Test)	-	500	10% discount to BIS
6.2.2(Authenticity Test)	-	500	10% discount to BIS
6.2.3(Fitness Test)	-	500	10% discount to BIS
6.2.4(Repeatability Test)	-	500	10% discount to BIS
6.2.5(Stress Test)	-	500	10% discount to BIS
6.2.6(Piece Counting Test)	-	500	10% discount to BIS
6.2.7(Values Counting Test)	-	500	10% discount to BIS
Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1)(Safety Interlocks)	-	500	10% discount to BIS

11 Sep, 2027

-
Included w.e.f.13.12.2024 exclusion Cl 4.2 Safety requirements (Cl 4.1 and subclauses of IS/IEC 62368-1) (General Requirements) Cl 4.2 Safety requirements (Cl 5.4 and subclauses of IS/IEC 62368-1) (Insulation materials and requirements) Cl 4.2 Safety requirements (Cl 10, 10.1 to 10.6 and subclauses of IS/IEC 62368-1) (Radiation) Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1) (Components) Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1) (Components) Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1) (Components) Cl 4.2 Safety requirements ( Annex. G, G.1 to G.16 including its subclauses of IS/IEC 62368-1) (Components) Cl 4.2 Safety requirements ( Annex. J, J.1 to J.3 including its subclauses of IS/IEC 62368-1) (Insulated winding wires for use without interleaved insulation) Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1) (Equipment containing batteries and their protection circuits) Cl 4.2 Safety requirements ( Annex. M, M.1 to M.10 including its subclauses of IS/IEC 62368-1) (Equipment containing batteries and their protection circuits) Cl 4.2 Safety requirements ( Annex.R, R.1 to R.4 and its subclauses of IS/IEC 62368-1) (Limited short-circuit test) Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1) (Construction requirements for outdoor enclosure) Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1) (Construction requirements for outdoor enclosure) Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1) (Construction requirements for outdoor enclosure) Cl 4.2 Safety requirements ( Annex Y , Y.1 to Y.6 and its subclauses of IS/IEC 62368-1) (Construction requirements for outdoor enclosure) Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1) (Safety Interlocks) Cl 4.2 Safety requirements ( Annex. K, K.1 to K.7 including its subclauses of IS/IEC 62368-1) (Safety Interlocks)

7518

Classic Testing & Research Centre (B17), Noida

8180826

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
4(GENERAL REQUIREMENT)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges)

7519

SKC COMPLIANCE LAB PRIVATE LIMITED, MAHADEVPURA

6170406

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

22300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	500	10% discount for BIS
8.0(Protection against access to live part test)	-	750	10% discount for BIS
10.0(Power Input and current test)	-	2500	10% discount for BIS
11.0(Heating test)	-	3000	10% discount for BIS
13.0(Leakage current and electric strength test)	-	1500	10% discount for BIS
14.0(Transient voltages)	-	500	10% discount for BIS
15.0(Moisture Resistance)	-	2500	10% discount for BIS
16.0(Leakage current and electric strength test)	-	1000	10% discount for BIS
17.0(Overload protection of transformers test)	-	500	10% discount for BIS
19.0(Abnormal Operations)	-	2500	10% discount for BIS
20.0(Stability and Mechanical Hazards)	-	750	10% discount for BIS
21.0(Mechanical Strength)	-	750	10% discount for BIS
22.0(Construction verification related tests)	-	1000	10% discount for BIS
23.0(Internal wiring)	-	500	10% discount for BIS
24.0(Components)	-	100	10% discount for BIS
25.0(Supply connections and External Flexible Cords)	-	500	10% discount for BIS
26.0(Terminal for External Conductors)	-	500	10% discount for BIS
27.0(Provision for Earthing)	-	500	10% discount for BIS
28.0(Screws and connections)	-	500	10% discount for BIS
29.0(Clearances and Creepage distances and solid insulation)	-	350	10% discount for BIS
30.0(Resistance to heat and fire)	-	100	10% discount for BIS
31.0(Resistance to rusting)	-	1000	10% discount for BIS
32.0(Radiation, Toxicity and Similar hazards)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
6.0(Classification)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
7.0(Marking and instructions)	-	2000	-
8.0(Protection against access to live part test)	-	2000	-
10.0(Power Input and current test)	-	3000	-
11.0(Heating test)	-	5000	-
13.0(Leakage current and electric strength test)	-	3000	-
14.0(Transient voltages)	-	1000	-
15.0(Moisture Resistance)	-	5000	-
16.0(Leakage current and electric strength test)	-	3000	-
17.0(Overload protection of transformers test)	-	2000	-
19.0(Abnormal Operations)	-	8000	-
20.0(Stability and Mechanical Hazards)	-	3000	-
21.0(Mechanical Strength)	-	2000	-
22.0(Construction verification related tests)	-	2000	-
23.0(Internal wiring)	-	2000	-
24.0(Components)	-	3000	-
25.0(Supply connections and External Flexible Cords)	-	1500	-
26.0(Terminal for External Conductors)	-	1500	-
27.0(Provision for Earthing)	-	2000	-
28.0(Screws and connections)	-	2000	-
29.0(Clearances and Creepage distances and solid insulation)	-	1500	-
30.0(Resistance to heat and fire)	-	2000	-
31.0(Resistance to rusting)	-	2000	-
32.0(Radiation, Toxicity and Similar hazards)	-	1500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
6.0(Classification)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
6.0(Classification)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
7.0(Marking and instructions)	-	0	-
8.0(Protection against access to live part test)	-	0	-
10.0(Power Input and current test)	-	0	-
11.0(Heating test)	-	0	-
13.0(Leakage current and electric strength test)	-	0	-
14.0(Transient voltages)	-	0	-
15.0(Moisture Resistance)	-	0	-
16.0(Leakage current and electric strength test)	-	0	-
17.0(Overload protection of transformers test)	-	0	-
19.0(Abnormal Operations)	-	0	-
20.0(Stability and Mechanical Hazards)	-	0	-
21.0(Mechanical Strength)	-	0	-
22.0(Construction verification related tests)	-	0	-
23.0(Internal wiring)	-	0	-
24.0(Components)	-	0	-
25.0(Supply connections and External Flexible Cords)	-	0	-
26.0(Terminal for External Conductors)	-	0	-
27.0(Provision for Earthing)	-	0	-
28.0(Screws and connections)	-	0	-
29.0(Clearances and Creepage distances and solid insulation)	-	0	-
30.0(Resistance to heat and fire)	-	0	-
31.0(Resistance to rusting)	-	0	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
6.0(Classification)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-
7.0(Marking and instructions)	-	-	-
8.0(Protection against access to live part test)	-	-	-
10.0(Power Input and current test)	-	-	-
11.0(Heating test)	-	-	-
13.0(Leakage current and electric strength test)	-	-	-
14.0(Transient voltages)	-	-	-
15.0(Moisture Resistance)	-	-	-
16.0(Leakage current and electric strength test)	-	-	-
17.0(Overload protection of transformers test)	-	-	-
19.0(Abnormal Operations)	-	-	-
20.0(Stability and Mechanical Hazards)	-	-	-
21.0(Mechanical Strength)	-	-	-
22.0(Construction verification related tests)	-	-	-
23.0(Internal wiring)	-	-	-
24.0(Components)	-	-	-
25.0(Supply connections and External Flexible Cords)	-	-	-
26.0(Terminal for External Conductors)	-	-	-
27.0(Provision for Earthing)	-	-	-
28.0(Screws and connections)	-	-	-
29.0(Clearances and Creepage distances and solid insulation)	-	-	-
30.0(Resistance to heat and fire)	-	-	-
31.0(Resistance to rusting)	-	-	-
32.0(Radiation, Toxicity and Similar hazards)	-	-	-
6.0(Classification)	-	-	-
9.0(Starting of motor-operated appliances test)	-	-	-
18.0(Endurance test)	-	-	-
4(General Requirements)	-	-	-
5(General condition for the tests)	-	-	-

24 May, 2028

-
Included.w.e.f.26.12.2024 Exclusion Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 (Fast transient bursts) Cl 19.11.4.4 (Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 (Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics)

7520

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	200	-
Clause - 7.1(SULPHUR)	-	200	-
Clause - 7.1(PHOSPHURS)	-	200	-
Clause - 7.1(MANGANESE)	-	200	-
Clause - 7.1(NITROGEN)	-	400	-
As per Clause 10(Dimension)	-	0	-
As per Clause 10.1(Dimension Width)	-	60	-
As per Clause 10.1(Dimension Thickness)	-	60	-
As per Clause 10.2(Dimension Length)	-	60	-
As per Clause 11.5(Bend)	-	100	-
As per Clause 11.6(Camber)	-	100	-
As per Clause 11.7 (i)(Out of Square)	-	60	-
As per Clause 11.7 (ii)(Round Corners)	-	60	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	100	-
Clause. 13(Macro examination test.)	-	1500	-
Clause. 13(Sulphur print.)	-	1500	-
Clause. 13(Inclusion content)	-	1000	-
Clause.7.1(Silicon)	-	200	-
Clause.7.1(Carbon Equbalant)	-	1000	-
Clause.7.1(Microalloy element)	-	800	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	50	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	50	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	50	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	50	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	50	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	50	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	50	-
As per Clause 11.7 (ix)(Scarfing pits)	-	50	-
Clause. 13(Macro examination test.)	-	50	-
Clause. 14(Marking)	-	50	-
Clause.15(Ordering information)	-	50	-
Clause.6.0(Manufacture)	-	50	-

19 Apr, 2028

-
-

7521

Classic Testing & Research Centre (B17), Noida

8180826

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.2(Marking)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.4(Marking)	-	500	-
7.5(Marking)	-	500	-
7.6(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
9(Starting, IS 302-1)	-	0	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance-Spillage test)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	1000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21(Mechanical Strength, IS 302-1)	-	1000	-
21(Mechanical Strength, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
22.2(Construction)	-	1000	-
22.3(Construction)	-	1000	-
22.4(Construction)	-	1000	-
22.5(Construction)	-	1000	-
22.6(Construction)	-	1000	-
22.8(Construction)	-	1000	-
22.9(Construction)	-	1000	-
22.1(Construction)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
23(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components)	-	1000	-
24.4(Components)	-	1000	-
24.5(Components)	-	1000	-
24.6(Components)	-	1000	-
24.7(Components)	-	1000	-
24.8(Components)	-	1000	-
24.9(Components)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	1000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	1000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	1000	-
34.3(Whisking egg whites )	-	1000	-
34.4(IDLI batter-Grinding of black gram)	-	1000	-
34.4(IDLI batter-Grinding of rice)	-	1000	-
34.4(IDLI batter-Grinding of rice)	-	1000	-
34.4(IDLI batter-Grinding of rice)	-	1000	-
34.5.1 (a)(Operational test for juicers )	-	1000	-
34.5.1 (b)(Operational test for juicers )	-	1000	-
34.5.2(Operational test for juicers )	-	1000	-
35(Temperature withstand test for bowl)	-	1000	-
36(Test for controls )	-	1000	-
37(Strength of Assembly )	-	1000	-
37(Strength of Assembly )	-	1000	-
Cl 37(Strength of assembly)	-	1000	-
Cl 36(Test for controls)	-	1000	-
Cl 35(Temperature withstand test for bowl)	-	1000	-
Cl 34(Operational Tests)	-	1000	-
Cl.32(Radiation, toxicity and similar hazards)	-	1000	-
Cl.31(Resistance to rusting)	-	1000	-
Cl.30(Resistance to heat and fire)	-	1000	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	1000	-
Cl.28(Screws and connections)	-	1000	-
Cl.27(Provision for Earthing)	-	1000	-
Cl.26(Terminals for external conductors)	-	1000	-
Cl.25(Supply connection and external flexible cords)	-	1000	-
Cl.24(Components)	-	1000	-
Cl.23(Internal wiring)	-	1000	-
Cl.22(Construction)	-	1000	-
Cl.21(Mechanical Strength)	-	1000	-
Cl.20(Stability & Mechanical Hazards)	-	1000	-
Cl.19(Abnormal operation)	-	1000	-
Cl.18(Endurance)	-	1000	-
Cl. 16(Leakage current and Electric strength)	-	1000	-
Cl.15(Moisture Resistance)	-	1000	-
Cl.14(Transient Over voltage)	-	1000	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	1000	-
Cl.11(Temperature rise/ Heating)	-	1000	-
Cl.10(Power Input and Current)	-	1000	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	1000	-
Cl. 7(Marking and instructions)	-	500	-
Cl. 6(Classification)	-	500	-
3(GENERAL REQUIREMENTS)	-	500	-
4(GENERAL NOTES ON TESTS)	-	500	-
5(RATING)	-	500	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

7522

DELHI TEST HOUSE, Azadhpur

8131406

IS 9532 (2023)

CHAKKA AND SHRIKHAND - SPECIFICATION (First Revision of IS 9532)

8040 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Appearance and colours- IS 9532-2023)	-	500	COMPLETE TESTING-12500/-
6.1.3(Odour and Flavour- IS 9532-2023)	-	500	COMPLETE TESTING-12500/-
6.1.4(Texture and Consistency- IS 9532-2023)	-	500	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (i)(Total solids-IS 11622)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433)	-	500	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes /g)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive))	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762)	-	500	COMPLETE TESTING-12500/-
6.1.2(Appearance and colours- IS 9532-2023)	-	250	COMPLETE TESTING-12500/-
6.1.3(Odour and Flavour- IS 9532-2023)	-	250	COMPLETE TESTING-12500/-
6.1.4(Texture and Consistency- IS 9532-2023)	-	250	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (i)(Total solids-IS 11622)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433)	-	500	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes /g)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive))	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count)	-	1000	COMPLETE TESTING-12500/-
Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli)	-	1000	COMPLETE TESTING-12500/-
Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (i)(Total solids, percent by mass, Min)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (ii)(Milk fat (on dry basis), percent by mass, Min)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (Iii)(Milk Protein (on dry basis), percent by mass, Min)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (iv)(Titratable acidity (as lactic acid), percent by mass, Max)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (v)(Sugar (sucrose), (on dry basis), percent by mass, Max)	-	1000	COMPLETE TESTING-12500/-
Cl-6.2.6, Table-3 (vi)(Total ash (on dry basis), percent by mass, Max)	-	1000	COMPLETE TESTING-12500/-
6.2.2(Appearance and Colour)	-	250	COMPLETE TESTING-12500/-
6.2.3(Odour and Flavour)	-	250	COMPLETE TESTING-12500/-
6.2.4(Texture and Consistency)	-	250	COMPLETE TESTING-12500/-
6.1.2(Appearance and colours- IS 9532-2023)	-	-	-
6.1.3(Odour and Flavour- IS 9532-2023)	-	-	-
6.1.4(Texture and Consistency- IS 9532-2023)	-	-	-
Table 1 clause 6.1.6 (i)(Total solids-IS 11622)	-	-	-
Table 1 clause 6.1.6 (iii)(Milk protein (on dry basis)- IS 11917)	-	-	-
Table 1 clause 6.1.6 (iv)(Titrable acidity (as lactic acid)- 12 Of IS 1479 Part 1)	-	-	-
Table 1 clause 6.1.6 (v)(Total ash (on dry basis) -Annex C of IS 14433)	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (vi)(Listeria monocytogenes /g)	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (v)(Salmonella sp.)	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (ii)(Staphylococcus aureus(Coagulase positive))	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (i)(Coliform count)	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (iv)(E.coli)	-	-	-
Table 2 clause 6.1.6 & 6.2.6 (iii)(Yeast & Mould count)	-	-	-
Table 1 clause 6.1.6 (ii)(Milk fat (on drybasis)- IS 11762)	-	-	-
Cl-6.2.6, Table-3 (i)(Total solids, percent by mass, Min)	-	-	-
Cl-6.2.6, Table-3 (ii)(Milk fat (on dry basis), percent by mass, Min)	-	-	-
Cl-6.2.6, Table-3 (Iii)(Milk Protein (on dry basis), percent by mass, Min)	-	-	-
Cl-6.2.6, Table-3 (iv)(Titratable acidity (as lactic acid), percent by mass, Max)	-	-	-
Cl-6.2.6, Table-3 (v)(Sugar (sucrose), (on dry basis), percent by mass, Max)	-	-	-
Cl-6.2.6, Table-3 (vi)(Total ash (on dry basis), percent by mass, Max)	-	-	-
6.2.2(Appearance and Colour)	-	-	-
6.2.3(Odour and Flavour)	-	-	-
6.2.4(Texture and Consistency)	-	-	-

17 Jun, 2027

-
Included.w.e.f.02.01.2025

7523

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 18739 (2024)

Textiles Bedsheets Pillow cover and Blanket Cover Specification

Textiles-Bedsheets, Pillow Cover and Blanket Cover-Specification

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table-1(Fibre content)	-	1500	-
3.1, Table-1(Count of Yarn-Warp)	-	300	-
3.1, Table-1(Count of Yarn-Weft)	-	300	-
3.1, Table-1(Weave)	-	500	-
3.1, Table-1(Ends/cm)	-	500	-
3.1, Table-1(Picks/cm)	-	500	-
3.1, Table-1(Mass g/m2, Min)	-	500	-
3.1, Table-1, (iii)(Tolerance)	-	500	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	1000	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	-
3.1, Table-2(Tear Strength,-Warpway)	-	1000	-
3.1, Table-2(Tear Strength,-Weftway)	-	0	-
3.1, Table-2(Fabric Skew, Percent, Max)	-	1000	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	-
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	1500	-
3.1, Table-2(Scouring Loss Percent, Max)	-	5000	-
3.1, Table-2(pH Value)	-	1000	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	4000	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	4000	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	4000	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	5000	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	5000	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	5000	-
3.2(Fabric Content)	-	0	-
3.3(Freedom from Defects)	-	1000	-
3.4(Sewing Thread)	-	1500	-
3.5(Hems)	-	1000	-
3.6(Sewing)	-	1000	-
3.7, Table-4(- Size)	-	400	-
3.7, Table-4(Width,cm)	-	300	-
3.7, Table-4(Length, cm)	-	300	-
Cl-3.8(Soil Release Efficiency)	-	4500	-
Cl-3.9(Antimicrobial Activity)	-	0	-
Cl-3.10(Whiteness Index)	-	2000	-
3.1, Table-1(Fibre content)	-	0	-
3.1, Table-1(Count of Yarn-Warp)	-	0	-
3.1, Table-1(Count of Yarn-Weft)	-	0	-
3.1, Table-1(Weave)	-	0	-
3.1, Table-1(Ends/cm)	-	0	-
3.1, Table-1(Picks/cm)	-	0	-
3.1, Table-1(Mass g/m2, Min)	-	0	-
3.1, Table-1, (iii)(Tolerance)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	-
3.1, Table-2(Tear Strength,-Warpway)	-	0	-
3.1, Table-2(Tear Strength,-Weftway)	-	0	-
3.1, Table-2(Fabric Skew, Percent, Max)	-	0	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	-
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	0	-
3.1, Table-2(Scouring Loss Percent, Max)	-	0	-
3.1, Table-2(pH Value)	-	0	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	0	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	0	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	0	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	0	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.2(Fabric Content)	-	0	-
3.3(Freedom from Defects)	-	0	-
3.4(Sewing Thread)	-	0	-
3.5(Hems)	-	0	-
3.6(Sewing)	-	0	-
3.7, Table-4(- Size)	-	0	-
3.7, Table-4(Width,cm)	-	0	-
3.7, Table-4(Length, cm)	-	0	-
Cl-3.8(Soil Release Efficiency)	-	0	-
Cl-3.10(Whiteness Index)	-	0	-
Cl-3.9(Antimicrobial Activity)	-	0	-
3.1, Table-1(Fibre content)	-	0	-
3.1, Table-1(Count of Yarn-Warp)	-	0	-
3.1, Table-1(Count of Yarn-Weft)	-	0	-
3.1, Table-1(Weave)	-	0	-
3.1, Table-1(Ends/cm)	-	0	-
3.1, Table-1(Picks/cm)	-	0	-
3.1, Table-1(Mass g/m2, Min)	-	0	-
3.1, Table-1, (iii)(Tolerance)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	0	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	0	-
3.1, Table-2(Tear Strength,-Warpway)	-	0	-
3.1, Table-2(Tear Strength,-Weftway)	-	0	-
3.1, Table-2(Fabric Skew, Percent, Max)	-	0	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	-
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	0	-
3.1, Table-2(Scouring Loss Percent, Max)	-	0	-
3.1, Table-2(pH Value)	-	0	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	0	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	0	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	0	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	0	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	0	-
3.2(Fabric Content)	-	0	-
3.3(Freedom from Defects)	-	0	-
3.4(Sewing Thread)	-	0	-
3.5(Hems)	-	0	-
3.6(Sewing)	-	0	-
3.7, Table-4(- Size)	-	0	-
3.7, Table-4(Width,cm)	-	0	-
3.7, Table-4(Length, cm)	-	0	-
Cl-3.8(Soil Release Efficiency)	-	0	-
Cl-3.10(Whiteness Index)	-	0	-
Cl-3.9(Antimicrobial Activity)	-	0	-

-
Included w.e.f 05.05.2025 Exclusion: Cl-3.9 (Antimicrobial Activity)

7524

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	500	-
3.2(Aluminium conductor)	-	500	-
4.1(INSULATION : lnsulation for General Service)	-	500	-
4.2(INSULATION : Heat Resisting insulation)	-	500	-
4.3(INSULATION : Silicone Rubber Insulation)	-	500	-
5.1(TAPE : Proofed Tape)	-	500	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	500	-
5.3(TAPE : Giass Tape)	-	500	-
6.1(FILLERS : )	-	500	-
7.1(BRAID : Textile Braid)	-	500	-
7.2(BRAID : Glass Braid )	-	500	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	500	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	500	-
9.1(PresenRtive Compound)	-	500	-
9.2(Varnish)	-	500	-
10( Conductor )	-	500	-
11(Separator tape)	-	500	-
12.2(Insulation : Thickness of Insufatien)	-	1000	-
12.4(Insulation : Allplication of Insulation)	-	500	-
13(CORE IDENTiFICATlON)	-	500	-
14(Tape)	-	500	-
15(BRAIDING)	-	500	-
16(COMPOUNDING AND VARNISHING)	-	500	-
17(LAYING UP OF CORES)	-	500	-
18( Binder tape)	-	500	-
19.2(Sheath : Thickness of Sheath)	-	1000	-
19.4( Sheath :Colour)	-	500	-
20( Overall diameter)	-	1000	-
21. (a)(Persulphate tests (for copper))	-	1000	-
21. (b)(Annealing Test (for coper))	-	500	-
21. (c)( Tensile Test (for aluminium))	-	500	-
21. (d)( Wrapping Test (for aluminium))	-	500	-
21. (e)(Conductor Resistance )	-	1000	-
21.1( Tensile strength )	-	1000	-
22.1( Elongation)	-	1000	-
21.1(type test : Ageing In air oven)	-	2000	-
21.1(type test : Ageing in air bomb)	-	2000	-
21.1(type test : Ageing In oxygen bomb)	-	2000	-
21.1(type test : Hot set elongation)	-	2000	-
21.1(type test : Tear resistance )	-	1000	-
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	1000	-
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	1000	-
21(Water absorption test)	-	3000	-
23(identification)	-	500	-
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	2000	-
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	2000	-
Cl No. 4.1(Ageing in air bomb - Elongation)	-	2000	-
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	2000	-
Cl No. 4.1(Ageing in air oven - Elongation)	-	2000	-
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	2000	-
Cl No. 22.2(High Voltage Test (Water Immersion))	-	1000	-
Cl No. 4.1(Insulation resistance)	-	1000	-
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	2000	-
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	1000	-
Cl No. 23.1, 23.2(Identification)	-	500	-
21.1((f) Oil resistance)	-	2000	-
Cl.9.1(Compound and Varnish)	-	500	-
Cl.9.2(Compound and Varnish)	-	500	-
Cl.21.1 & Table 2 of IS: 6380-1984(Water Absorption Test)	-	3000	-
Cl.19.1(Application of Sheath)	-	500	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	1000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	1000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Without Ageing))	-	1000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air oven))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air oven))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air Bomb ))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (After ageing in air Bomb ))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Oil Resistance Test ))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Oil Resistance Test ) Variation on Elongation (Percentage))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Hot Set Test))	-	2000	-
Cl.21.1 & Table 3 of IS: 6380-1984(Physical Test on outer sheath (Hot Set Test))	-	2000	-
Cl.21.1 & Table 2 of IS: 6380-1984(Insulation Resistance Test)	-	1000	-
Cl.21.1 & Table 2 of IS: 6380-1984(Insulation Resistance Test)	-	1000	-

11 Mar, 2028

-
-

7525

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 17545 (2021)

WHITE CEMENT BASED POLYMERIC PUTTY

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5 , Table 1 , 1) , iii)(Setting time Initial, Min Final, Max)	-	1500	NA
4.5 , Table 1 , 1) , ii)(Water retentivity, percent, min)	-	2500	NA
4.6 , Table 2 , 1) , i)(Compressive strength, 28 days, Min)	-	3500	NA
4.5 , Table 1 , 1) , i)(Tensile adhesion strength (avg. of min 3 readings) @14 days, N/mm2 , Min)	-	3500	NA
4.5 , Table 1 , 1) , iv)(Polymer content (based on loss on ignition), percent by mass, Min)	-	2500	NA
4.5 , Table 1 , 1) , v)(Degree of whiteness, percent, Min)	-	2500	NA
4.5 , Table 1 , 1) , vi)(Cement content, percent, Min)	-	2500	NA

31 Dec, 2026

-
-

7526

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.4(Carbon Black Content)	-	1000	NA
Cl.4.1.4(Carbon Black Di spersion)	-	500	NA
Cl.4.1.3(Den sity Test)	-	750	NA
Cl.4.1.3(MFR Test)	-	1250	NA
4.1.3, Table 1,(iii)(Thermal stability)	-	1500	NA
4.1.3, Table 1,(iv)(Volatile matter)	-	500	NA
4.1.3, Table 1,(v)(Water content)	-	500	NA
4.2(Metallic Couplers)	-	1500	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	750	NA
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	750	NA
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	750	NA
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	750	NA
5(Dimensions of pipe - i) Outside diameter)	-	500	NA
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	NA
Cl.6.2.4(Workmanship and Appearance)	-	500	NA
7.3(Quick Couple Fitting)	-	750	NA
Cl.7.2.3(Weld ability Test)	-	5000	NA
7.2.1(Leakage Test)	-	1500	NA
Cl.7.2.2(Cl.7.2.2)	-	500	NA
7.1.6(Corrected Density)	-	750	NA
7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	NA
Cl.7.1.4(Tensile Test)	-	1500	NA
7.1.3(Reversion)	-	1000	NA
Cl.7.1.2(Hydraulic Characteristic)	-	5000	NA
Cl.7.1.2(Hydraulic Characteristic)	-	5000	NA

31 Dec, 2026

-
-

7527

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Type A and Type B

22750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	NA
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	NA
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	NA
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	NA
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	NA
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	NA
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	NA
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	NA
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	100	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	NA
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	NA
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	100	NA
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	100	NA
9.1(PIPE ENDS)	-	100	NA
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	NA
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	NA
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	350	NA
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1250	NA
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	950	NA
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	350	NA
10.3(Effect on Water Test)	-	2300	NA
10.7(Sulphated Ash Content)	-	950	NA
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	3050	NA
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1750	NA
11.2(Resistance to External Blows at 0°C)	-	450	NA
6.1.2(PVC Resin)	-	550	NA
6.1.1(VCM Content)	-	2750	NA
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	3050	NA
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1750	NA
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1750	NA

31 Dec, 2026

-
-

7528

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 1328 (1996)

Veneered Decorative Plywood -Specification

Type 1 , Type 2

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	100	NA
4.1(Grade - For MR)	-	100	NA
4.2(Type - For Type 1)	-	100	NA
4.2(Type - For Type 2)	-	100	NA
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	100	NA
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	100	NA
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	100	NA
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	100	NA
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	100	NA
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	100	NA
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	NA
9(Finish - Cl. 9.1, 8.3)	-	100	NA
9(Finish - Cl. 9.2, 8.3)	-	100	NA
11(Tests - Moisture Content - Part 1 of IS 1734)	-	500	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	600	NA
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	600	NA

31 Dec, 2026

-
-

7529

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP GRADE-DECORATIVE/BWP-COMMERCIAL TYPE/MR-DECORATIVE

6910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	550	NA
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	550	NA
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	550	NA
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	550	NA
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	550	NA
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	750	NA
9.2.3(Adhesion of Plies - Annexure H)	-	250	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	550	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	550	NA
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	200	NA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	200	NA
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	NA
7.3(Dimensional Requirements - Squareness - Annexure D)	-	180	NA
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	180	NA
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	NA
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	NA
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	NA
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	100	NA
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	100	NA
cl. 11(marking)	-	0	NA

31 Dec, 2026

-
-

7530

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

BWP/TYPE-1/TYPE-2/TYPE-3

7550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	100	NA
7.2(DIMENSIONS & TOLERANCES )	-	150	NA
7.2(DIMENSIONS & TOLERANCES )	-	150	NA
7.3(DIMENSIONS & TOLERANCES )	-	150	NA
7.4(DIMENSIONS & TOLERANCES )	-	100	NA
7.4(DIMENSIONS & TOLERANCES )	-	50	NA
8.1(WORKMANSHIP AND FINISH )	-	50	NA
8.3(WORKMANSHIP AND FINISH )	-	50	NA
10.1.1(MOISTURE CONTENT)	-	250	NA
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	250	NA
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	200	NA
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	150	NA
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	150	NA
10.1.4(RESISTANCE TO WATER TEST)	-	150	NA
10.1.5(MYCOLOGICAL TEST )	-	250	NA
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	250	NA
10.1.5.2(MYCOLOGICAL TEST )	-	150	NA
10.1.6(TENSILE STRENGTH)	-	250	NA
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	250	NA
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	250	NA
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	250	NA
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	250	NA
10.1.9(RETENTION OF PRESERVATIVE)	-	250	NA
12, 12.1(MARKING)	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	100	NA
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	100	NA
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	150	NA
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	150	NA
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	100	NA
10.1.9(Chem)(RETENTION OF PRESERVATIVE)	-	500	NA
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - AVERAGE)	-	150	NA
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - WOOD FAILURE, Average)	-	150	NA
cl. 10.1.3.1(resistance to water test - glue shear strength - AVERAGE)	-	150	NA
cl. 10.1.3.1(resistance to water test - glue shear strength - WOOD FAILURE, Average)	-	100	NA
cl. 10.1.5.1(mycological test - glue shear strength - AVERAGE)	-	100	NA
cl. 10.1.5.1(mycological test - glue shear strength - WOOD FAILURE, Average)	-	100	NA

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number