BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14136 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7351

BIS, Central Laboratory (CL)

None

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
5.3 (Appearance)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
5.3 (Appearance)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
5.3/Table 2/xiii (Suphate)	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
5.3 (Appearance)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
5.3 (Appearance)	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
5.3 (Appearance)	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/ix (2,4 –D)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xvi (Dieldrin)	-
5.4/Annex D/xvi (Aldrin)	-
5.3 (Appearance)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.1 (General Requirements)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.3 (Faecal streptococci)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-
Cl-5.2.9 (V.parahaemolyticus)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.3, Table-3 (x) (Uranium)	-
Cl-5.3, Table-1 (iii) (Taste)	-

-
12 Litre for chemical and 12 lt for microbiology

7352

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

3214 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3214	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3214	-

31 Dec, 2026

-
Included w.e.f. 29-09-2020

7353

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	15000	-
5.2(Message Readability)	-	15000	-
5.1(Inputting of text)	-	15000	-
5.2(Message Readability)	-	15000	-
6(Marking)	-	1000	-
6(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.12.2022

7354

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	charges are per component basis

31 Dec, 2026

-
REVISED VERWION OF IS 9873 PT-3):2020 INCLUDED W.E.F. 20-07-2021.

7355

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

3597 View breakup
Rs. 3597/- [45% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.9 - c( Metal wires and rods)	-	500	N/A
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	N/A
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	N/A
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	N/A
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	500	N/A
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	N/A
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	N/A
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	500	N/A
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	N/A
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	N/A
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	N/A
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	N/A
4.11.6(Cords- Electrical cables)	-	500	N/A
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	N/A
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	N/A
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	N/A
4.11.10(Cords-Cords on toy bags)	-	500	N/A
4.11.11( Cords, strings and lines for flying toys- )	-	500	N/A
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	N/A
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	NA
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	N/A
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	N/A
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	N/A
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	N/A
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	N/A
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	N/A
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	N/A
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	N/A
4.14(a)(Springs)	-	500	N/A
4.14(b)(Springs)	-	500	N/A
4.14(c)(Springs)	-	500	N/A
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	N/A
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	N/A
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	N/A
4.16.1(Enclosures-Ventilation)	-	500	N/A
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	N/A
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	N/A
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	N/A
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	N/A
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	N/A
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	N/A
4.18.2(b)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(c)(Projectile toys-Projectiles)	-	500	N/A
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	N/A
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	N/A
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	N/A
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	N/A
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	N/A
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	N/A
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	500	N/A
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	N/A
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	N/A
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	500	N/A
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	N/A
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	N/A
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	N/A
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	N/A
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	N/A
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	N/A
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	N/A
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	N/A
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	N/A
4.19(Rotors and propellers)	-	500	N/A
4.2(Aquatic toys)	-	500	N/A
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	N/A
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	N/A
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	N/A
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	N/A
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	N/A
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	N/A
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	N/A
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	N/A
4.6.2(Edges-Functional sharp edges)	-	500	N/A
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	N/A
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	N/A
4.7.2 - a(Points-Functional sharp points)	-	500	N/A
4.7.2 - b(Points-Functional sharp points)	-	500	N/A
4.8.1(Projections-General requirments)	-	500	N/A
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	N/A
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	N/A
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	N/A
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	N/A
4.6.4( Edges-Edges on moulded toys)	-	500	N/A
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	N/A
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	N/A
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	N/A
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	N/A
4.7.3 (Wooden toys)	-	500	N/A
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	N/A
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	N/A
4.1(Normal use)	-	500	N/A
4.3.1(Material quality)	-	500	N/A
5.24.6.1(Tension Test General procedure)	-	500	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	N/A
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	1056	N/A
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	N/A
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	N/A
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	N/A
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	N/A
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	N/A
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	N/A
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	N/A
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	N/A
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	N/A
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	NA
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	500	NA
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	NA
4.16.1(Enclosures-Ventilation-No of openings)	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	NA
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	NA
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	NA
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	500	NA
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	500	NA

31 Dec, 2026

-
Excluding: Balloons (Cl.4.5.6), Marbles (Cl.4.5.7), Cord, Strings & Lines for flying toys / Electric Resistance of cords (Cl.4.11.7 / 5.11.3), Braking (Cl.4.21), Toy bicycles (Cl.4.22), Speed limitation of electrically driven ride on toy (Cl.4.23), Toy roller skates, Toy inline skates & Toy skate boards (Cl.4.27), Pull and push toys and hand activated spring propelled toys (Cl.5.25.2.3.7), Toy scooters (Cl.4.30)

7356

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1056 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1056	GST not included
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1056	GST not included
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1056	GST not included
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1056	GST not included
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1056	GST not included
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1056	GST not included
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1056	GST not included
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1056	GST not included
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1056	GST not included
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1056	GST not included
4.1(General)	-	1056	GST not included

31 Dec, 2026

-
-

7357

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15644 (2006)

Safety of electric toys

38250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	250	N/A
8.0(Power Input)	-	1000	N/A
9.0(Heating and abnormal operation)	-	2500	N/A
10.0(Electrical strength at operating temperature)	-	2500	N/A
11.1(Moisture resistance)	-	5000	N/A
11.2(Resistant to humidity)	-	5000	N/A
12.0(Electric strength at room temperature)	-	2500	N/A
13.0(Mechanical strength)	-	1000	N/A
14.1(Construction)	-	250	N/A
14.2(Construction)	-	250	N/A
14.3(Construction)	-	250	N/A
14.4(Construction)	-	250	N/A
14.5(Construction)	-	250	N/A
14.6(Construction)	-	250	N/A
14.7(Construction)	-	250	N/A
14.8(Construction)	-	250	N/A
14.9(Construction)	-	250	N/A
14.1(Construction)	-	250	N/A
14.11(Construction)	-	250	N/A
14.12(Construction)	-	250	N/A
14.13(Construction)	-	250	N/A
14.14(Construction)	-	250	N/A
15.1(Protection of cords and wires)	-	500	N/A
15.2(Protection of cords and wires)	-	500	N/A
16.0(Components)	-	250	N/A
17 Table-1(Screws and connections)	-	250	N/A
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	N/A
18.0(Clearance and creepage distance)	-	500	N/A
19.1(Ball pressure test IEC 60695-10-2)	-	2500	N/A
19.2.1(Glow wire test IEC 60695-2-11)	-	5000	N/A
19.2.2(Needle flame test)	-	5000	N/A
20.0(Radiation, toxicity and similar hazards)	-	250	N/A

31 Dec, 2026

-
Included w.e.f. 29-09-2020. Exclusion: radiation, toxicity & similr hazards (cl.20), toys incorporating lasers and light-emitting diodes (annex E)

7358

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

80000 View breakup
Rs.80,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	N/A
5(Classification of Luminaires')	-	2500	N/A
6.0(Marking)	-	2500	N/A
7.0(Construction)	-	40000	N/A
8.0(Creepage Distance and Clearances)	-	2500	N/A
9.0(Provision for earthing)	-	3500	N/A
10.0(Terminals)	-	15000	N/A
11.0(External & Internal Wiring)	-	11000	N/A
12.0(Protection against electric shock)	-	5000	N/A
13.0(Endurance Tests and Thermal Tests)	-	18000	N/A
14.0(Resistance to Dust & Moisture)	-	17000	N/A
15.0(Insulation Resistance and Electric Strength)	-	23000	N/A
16.0(Resistance to Heat , fire and tracking)	-	23000	N/A

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Scope restricted for rating up to 600 V only. Excluding: UV Radiation (Cl.4.24), Photometric test (Cl.17) and Resistance to dust, solid objects & moisture for pressure water tight luminaires (IPX8) (Cl.9.2.9 of RD.

7359

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

80000 View breakup
Rs.80,000/-[15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	15% discount to BIS
8(Protection against accidental contact with live parts)	-	20000	15% discount to BIS
9(Terminals)	-	121000	15% discount to BIS
10(PROVISION FOR EARTHING)	-	3000	15% discount to BIS
11(MOISTURE RESISTANCE)	-	10000	15% discount to BIS
12(Electric Strength)	-	1000	15% discount to BIS
14(Fault conditions)	-	5000	15% discount to BIS
15(Transformer heating)	-	15000	15% discount to BIS
17(Creepage distance and clearances)	-	5000	15% discount to BIS
18(Screws, current carrying parts and connections)	-	5000	15% discount to BIS
19(Resistance to heat, fire and tracking)	-	50000	15% discount to BIS
20(Resistance to corrosion)	-	5000	15% discount to BIS
16(Construction)	-	10000	15% discount to BIS

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Excluding: Testing of Components (Enclosure, Bridging resistor in primary circuit, Capacitor & RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains transformer, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeves, Connector, Fuse, Internal wire, LED, Optocoupler, EMI/EMC filter,

7360

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

63500 View breakup
Rs.63,500/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2500	15 % discount to BIS
6(Interchangeability)	-	5000	15 % discount to BIS
7(Protection against accidental contact with live parts)	-	4000	15 % discount to BIS
8(Insulation Resistance and Electric Strength)	-	19500	15 % discount to BIS
9(MECHANICAL STRENGTH)	-	10000	15 % discount to BIS
10(cap temperature)	-	10000	15 % discount to BIS
11(Resistance to Heat)	-	6500	15 % discount to BIS
12(Resistance to Flame and Ignition)	-	5500	15 % discount to BIS
13(Fault conditions)	-	12000	15 % discount to BIS
14(Creepage distance and clearances)	-	2500	15 % discount to BIS

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Restricted to cap type B22d, E27 & E14 only.

7361

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

180000 View breakup
Rs. 180000/- For Microwave Oven [15% discount to BIS].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2500	N/A
7(Marking and instructions)	-	2500	N/A
8(Protection against live parts)	-	2500	N/A
10(POWER INPUT AND CURRENT)	-	3500	N/A
11(HEATING)	-	8500	N/A
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	7000	N/A
14(IMPULSE VOLTAGE TEST)	-	5500	N/A
15(HUMIDITY TREATMENT TEST)	-	35000	N/A
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	7000	N/A
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	8500	N/A
18(ENDURANCE)	-	60000	N/A
19(ABNORMAL OPERATION)	-	14000	N/A
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	N/A
21(MECHANICAL STRENGTH)	-	33500	N/A
22(CONSTRUCTION)	-	8500	N/A
23(INTERNAL WIRING)	-	2500	N/A
24(COMPONENTS)	-	2500	N/A
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	8500	N/A
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	N/A
27(PROVISION FOR EARTHING)	-	3500	N/A
28(SCREWS AND CONNECTIONS)	-	2500	N/A
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3500	N/A
30(RESISTANCE TO HEAT AND FIRE)	-	17500	N/A
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	5500	N/A

31 Dec, 2026

-
With Exclusions for: Electro static discharge (Cl.19.11.4.1), Radiation Field (Cl.19.11.4.2), Fast Transient burst (Cl.19.11.4.3), Voltage dips and interruption (19.11.4.4), Automatic cord reel (Cl.22.16), Oxygen bomb (Cl.22.32) , Software (Cl.22.46), Components excluding Cl.24.1.1 for interlock (Cl.24)

7362

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

80000 View breakup
Rs.80000/- For UPS/ Inverters below 5 KVA [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	5000	N/A
4.6(Power interface)	-	5000	N/A
4.7(Marking & instructions)	-	2500	N/A
5.1(Protection against shock and energy hazards)	-	8500	N/A
5.2(Requirement of auxiliary circuits)	-	2000	N/A
5.3(Protective earthing and bonding)	-	8500	N/A
5.4(AC and DC power isolation)	-	2000	N/A
5.5(Over current and earth fault condition)	-	5000	N/A
5.6(Safety interlocks)	-	2000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	N/A
6.1(Wiring, connections and supply)	-	2500	N/A
6.2(Connection to power)	-	2500	N/A
6.3(Wiring terminals for external power conductors)	-	2500	N/A
7.1(Enclosure)	-	5000	N/A
7.2(STABILITY)	-	5000	N/A
7.3(MECHANICAL STRENGTH)	-	5000	N/A
7.4(Construction details)	-	2000	N/A
7.5(Resistance to fire)	-	10000	N/A
7.6(Battery location)	-	2000	N/A
8.1(General procision for earth leakage)	-	5000	N/A
8.2(Electric Strength)	-	5000	N/A
8.3(Abnormal operating and fault conditions)	-	8500	N/A
9.0(Connection to telecommunication networks)	-	8500	N/A

31 Dec, 2026

-
Included w.e.f. 28.11.2017. Excluding following tests: Components (Cl. 4.5 / RD Cl.1.5); Interlocks Switches (Cl. 5.6.1 & Cl. 5.6.2)/ (RD 2.8.2 & 2.8.5) Switches & Relays (Cl.2.8.7); Semiconductor device (Cl.2.10.5.4), PCB Material (Cl.2.10.6), Internal wire (Cl.3.1.4), Appliance inlet/ connectors (Cl.3.2.4), Non-rewirable plug with PVC sheathed cable (Cl.3.2.5), Batteries (Cl.4.3.8).

7363

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

90000 View breakup
Rs.90,000/- For Electronics Games (Video), Optical disc player with built in amplifiers of input power 200W and above, Amplifiers with input power 2000W and abovee. Electronic musical system with input power 200W and above, Power adopters for audio, video & similar electronic apparatus. Plasma/LCD/LED TVs of screen size 32" & above up to 100" Additional Products: Rs.1,10,000/- for Plasma/LCD/LED TVs of screen size up to 32". [15 % Discount to BIS]. ADDITIONAL PRODUCTS INCLUDED IN THE SCOPE W.E.F. 10-09-2020: Rs.80000/- for Wireless headphone & earphone, Rs.90000/- for Electronic Musical system with input power below 200W, Rs.110000/- Television other than plasma/LCD/LED/TVs . [15% Discount to BIS].

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	500	N/A
6(Hazardous radiations)	-	250	N/A
7(Heating under normal operating conditions)	-	5000	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	5000	N/A
9(Electric shock hazard under normal operating conditions)	-	5000	N/A
10(Insulation requirements)	-	15000	N/A
11(Fault conditions)	-	15000	N/A
12(Mechanical strength)	-	5000	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	N/A
14(Components)	-	2000	N/A
15(TERMINALS)	-	2500	N/A
16(External flexible cords)	-	2500	N/A
17(Electrical connections and mechanical fixings)	-	5000	N/A
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	5000	N/A
19(Stability and mechanical hazards)	-	5000	N/A
20(Resistance to fire)	-	15000	N/A

31 Dec, 2026

-
REVISED VERSION of IS 616:2017 included, Test facility for Measurement of Transient Voltages (Cl.13.3.4) & Additional Products included w.e.f. 10.04.2019. Exclusion of following testIonizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), LED Radiation (Cl.6.3), Requirements for insulated winding wires for use without additional interleaved insulation (Cl.8.16), Endurance test for wound components with insulated winding wires without additional interleaved insulation (8.17), Printed Boards (Cl.13.5), Component test (Cl.14), Flexing test (Cl.16.3), Mechanical strength of picture tubes and protection against the effects of Implosion (Cl.18) Electrical Component (Cl.20.2.2), Internal Wiring (Cl.20.2.3), Printed Boards (Cl.20.2.4), Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4 (Cl.20.2.5

7364

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

93975 View breakup
Rs.93,975/- For Laptop/Notebook/.Tablet, Visual display units, Video monitors of screen size 32" and above up to 100", Printer, Plotters, Scanner, Telephone answering machine, Set top box, Automatic data processing machine, Power adaptors for IT equipments, Mobile phones, Cash registers, Point of sale terminal, Copying machine/duplicators, Smart card readers, Mail processing machines/postage machines/Franking machines, Passport reader, Power banks for use in portable applications and Rs.60000/- for wireless key board. Additional Products: Rs.1,11,500/- Visual Display Units, Video monitors of screen size up to 32”, CCTV Cameras / CCTV Recorders, USB driven Barcode reader, Barcode Scanners, Iris Scanners, Optical fingerprint Scanners & Smart Watches. [15% discount to BIS]. ADDITIONAL PRODUCTS INCLUDED IN THE SCOPE W.E.F. 10-09-2020: : Rs.50000/- for Keyboard, Rs.125000/- Automatic teller cash dispensing machines, Rs.70000/-USB type external hard disk drive, Rs.70000/-USB type External solid state storage devices (above 256 GB capacity), Rs.93975/-Standalone switch mode poer supplied (SMPS) with output voltage 48 V (max). [15% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2500	N/A
1.6(Power interface .)	-	2500	N/A
1.7(Markings and instructions)	-	2500	N/A
2.1(Protection from electric shock and energy hazards)	-	7500	N/A
2.2(SELV circuits)	-	2500	N/A
2.3(TNV circuits)	-	2500	N/A
2.4(Limited current circuits)	-	2500	N/A
2.5(Limited power sources .)	-	3500	N/A
2.6(Provisions for earthing and bonding)	-	3500	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	N/A
2.8(Safety interlocks)	-	2500	N/A
2.9(Electrical insulation)	-	16000	N/A
2.10(Clearances, creepage distances and distances through insulation)	-	13000	N/A
3.1(General)	-	2500	N/A
3.2(Connection to a mains supply)	-	2500	N/A
3.3(Wiring terminals for connection of external conductors)	-	2500	N/A
3.4(Disconnection from the mains supply)	-	2500	N/A
3.5(Interconnection of equipment)	-	2500	N/A
4.1(Stability)	-	2500	N/A
4.2(Mechanical strength)	-	19000	N/A
4.3(Design and construction)	-	2500	N/A
4.4(Protection against hazardous moving parts)	-	2500	N/A
4.5(Thermal requirements)	-	17500	N/A
4.6(Openings in enclosures)	-	2500	N/A
4.7(Resistance to fire)	-	33000	N/A
5.1(Touch current and protective conductor curren)	-	3500	N/A
5.2(Electric strength)	-	3500	N/A
5.3(Abnormal operating and fault conditions)	-	8500	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3500	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	7000	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	2500	N/A
7.1(General)	-	2500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	12700	N/A

31 Dec, 2026

-
Test facility for Measurement of Transient Voltages (Cl.2.10.3.9) & Impulse test (Cl.2.10.3.5 & Cl.6.2.2.1) and Additional Products included w.e.f. 10.04.2019 Exclusion of following testComponent test (Cl.1.5), Moving Parts (Cl.2.8.5), Switches, Relays and their related circuits (Cl.2.8.7), Semi-Conductor Devices (Cl.2.10.5.4), AC power supply cords (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8), High Pressure Lamp (Cl.4.2.9), Batteries (Cl.4.3.8), Protection in operator

7365

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 8144 (2018)

Multipurpose dry batteries - Specification (Second Revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation Of Cells and Batteries, IS 8144)	-	8000	-
5(Dimensions, IS 8144)	-	8000	-
5(Dimensions, IS 8144)	-	8000	-
6.1(Terminals, IS 8144)	-	8000	-
6.2(Terminals, IS 8144)	-	8000	-
7.1(Requirements, IS 8144)	-	4000	-
7.2(Requirements, IS 8144)	-	3000	-
7.3(Requirements, IS 8144)	-	3000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	4000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	3000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.2(Marking, IS 8144)	-	1000	-
9.4(Initial Life Test, IS 8144)	-	1000	-
9.4(Initial Life Test (Flash light), IS 8144)	-	1000	-
9.4(Initial Life Test (Digital audio), IS 8144)	-	1000	-
9.4(Initial Life Test (Radio/clock), IS 8144)	-	1000	-
9.4(Initial Life Test (Remote control), IS 8144)	-	1000	-
9.4(Initial Life Test (Motor/toy), IS 8144)	-	1000	-
9.4(Initial Life Test (Tape recorder), IS 8144)	-	1000	-
9.4(Initial Life Test (Pulse test), IS 8144)	-	1000	-
9.4(Initial Life Test (Portable lighting), IS 8144)	-	1000	-
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	1000	-
9.4(Initial Life Test, IS 8144)	-	1000	-
9.5(Delayed Life Test, IS 8144)	-	10000	-
9.5(Delayed Life Test, IS 8144)	-	10000	-
9.6(Leakage Test, IS 8144)	-	10000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	1000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	1000	-
4(Designation Of Cells and Batteries, IS 8144)	-	1000	-
5(Dimensions, IS 8144)	-	1000	-
5(Dimensions, IS 8144)	-	1000	-
6.1(Terminals, IS 8144)	-	1000	-
6.2(Terminals, IS 8144)	-	1000	-
7.1(Requirements, IS 8144)	-	1000	-
7.2(Requirements, IS 8144)	-	1000	-
7.3(Requirements, IS 8144)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.1(Marking- Cl. 4.1.6, IS 6303)	-	1000	-
8.2(Marking, IS 8144)	-	1000	-
9.4(Initial Life Test, IS 8144)	-	1000	-
9.4(Initial Life Test (Flash light), IS 8144)	-	1000	-
9.4(Initial Life Test (Digital audio), IS 8144)	-	1000	-
9.4(Initial Life Test (Radio/clock), IS 8144)	-	1000	-
9.4(Initial Life Test (Remote control), IS 8144)	-	1000	-
9.4(Initial Life Test (Motor/toy), IS 8144)	-	1000	-
9.4(Initial Life Test (Tape recorder), IS 8144)	-	1000	-
9.4(Initial Life Test (Pulse test), IS 8144)	-	1000	-
9.4(Initial Life Test (Portable lighting), IS 8144)	-	1000	-
9.4(Initial Life Test (Accelerated/ lot acceptance test), IS 8144)	-	1000	-
9.4(Initial Life Test, IS 8144)	-	1000	-
9.5(Delayed Life Test, IS 8144)	-	1000	-
9.5(Delayed Life Test, IS 8144)	-	1000	-
9.6(Leakage Test, IS 8144)	-	1000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	1000	-
9.7(Delayed life test under dry heat conditions, IS 8144)	-	10000	-

04 Jan, 2027

-
Included w.e.f.07.11.2024

7366

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

Types- Pipes & Tubes

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	9200	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	2000	-
11(Transverse Tension Test,%)	-	200	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1000	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	1500	-
14(Reverse Flattaning Test)	-	500	-
15(Flattaning Test-IS 2328)	-	500	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1000	-
18(Leak Tighteness Test)	-	3500	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	2500	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	0	-
22(Workmanship, Finish and Appearance)	-	100	-
23(Repair by Welding or Grinding)	-	200	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	2000	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	2000	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	600	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	600	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	2500	-
Clause 10.1 - Table 4(Tensile Strength)	-	2000	-
Clause 10.1 - Table 4(Yield Strength)	-	1000	-
Clause 10.1 - Table 4(Percent Elongation)	-	1000	-
Clause 11(Transverse Tension Test)	-	200	-
Clause 12(Hardness Test)	-	1000	-
Clause 13(Flange Test)	-	1500	-
Clause 14(Reverse Flattening Test)	-	500	-
Clause 15(Flattening Test)	-	500	-
Clause 16(Grain Size)	-	1000	-
Clause 18()	-	2500	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	2500	-
Clause 22(Workmanship, Finish & Appearance)	-	100	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	2000	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	200	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	200	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	200	-
12.2(Hardness test)	-	1000	-
17(Sampling)	-	100	-
25(Marking)	-	100	-
6.7, Table 7, ii)(c) Chromium VI)	-	600	-

31 Dec, 2026

-
Included w.e.f 22.04.2024 Exclusion: Cl.20 (Eddy current test, air under water test, radiographic tests)

7367

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

67000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.3(BIS Certification Marking)	-	0	-
15( MARKING AND INFORMATION)	-	1000	-
10.5( Stable Operating Conditions)	-	6000	-
10.2(Standard Ratings)	-	6000	-
10(GENERAL TEST CONDITIONS)	-	0	-
9.5( Energy Consumption)	-	15000	-
9.3(Noise Level)	-	0	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	30000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	15000	-
8.2.7( Finish )	-	1000	-
8.2.6( Earthing Connections Tests)	-	5000	-
8.2.5( Leakage Current)	-	5000	-
8.2.4(Insulation Resistance Test)	-	5000	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.2(Protection against Electric Shock )	-	5000	-
6(PERFORMANCE REQUIREMENTS)	-	15000	-
15.3(BIS Certification Marking)	-	0	-
15( MARKING AND INFORMATION)	-	1000	-
10.2(Standard Ratings)	-	6000	-
10(GENERAL TEST CONDITIONS)	-	0	-
9.5( Energy Consumption)	-	15000	-
9.3(Noise Level)	-	0	-
9(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	25000	-
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	15000	-
8.2.7( Finish )	-	1000	-
8.2.6( Earthing Connections Tests)	-	5000	-
8.2.5( Leakage Current)	-	5000	-
8.2.2(Protection against Electric Shock )	-	5000	-
6(PERFORMANCE REQUIREMENTS)	-	15000	-
5(Manufacture and construction)	-	2000	-
7(Electrical equipment)	-	1000	-
8.2.1(General running tests)	-	2500	-
8.3.2(Rated frequency)	-	0	-
8.4.1 a)(Verification of marking)	-	1000	-
10.5( Stable Operating Conditions)	-	6000	-
8.2.4(Insulation Resistance Test)	-	5000	-
8.2.3 (High Voltage Tests)	-	5000	-

15 Jul, 2028

-
Included w.e.f. 20.08.2024

7368

TYPE TEST CENTER SIEMENS LIMITED KALWA, NAVI MUMBAI

7174421

IS/IEC 60947 : Part 5 : Sec 5 (2016)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.3(Durability test)	-	70000	-
7.4(Conditioning procedures)	-	300000	-
7.5(Shock test)	-	40000	-
7.6(Vibration tests)	-	80000	-
7.7.2(Opening test)	-	20000	-
7.7.3(Latching test for button-type emergency device)	-	20000	-
7.7.4(Resetting test)	-	20000	-
7.7.5(Impact test for button type actuators)	-	20000	-
5.2 (K.8.3.4 of IS/IEC 60947-5-1 : 2009)(Performance under conditional short-circuit current)	-	208000	-
5.3(Degrees of protection of enclosed equipment)	-	48000	-
5.4 (8.3.3.2 of IS 60947-5-1)("Test Sequence I : Operating Limits of contactor relays")	-	44000	-
5.4 (8.3.3.3 of IS 60947-5-1)(Test Sequence I : Temperature Rise)	-	24492	-
5.4 (8.3.3.4 of IS 60947-5-1)(Test Sequence I : Dielectric Properties)	-	29808	-
5.4 (8.2.4 of IEC 60947-1)(Test Sequence I : Mechanical properties of Terminal)	-	65280	-
5.4 (8.3.3.5.2 of IS 60947-5-1)(Test sequence II : Making and breaking capacities of switching elements under normal conditions)	-	87048	-
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence II : Dielectric verification)	-	12960	-
5.4 (8.3.3.5.3 of IS 60947-5-1)(Test sequence III : Making and breaking capacities of switching elements under abnormal conditions)	-	18840	-
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence III : Dielectric verification)	-	12960	-
5.4 (8.3.4 of IS 60947-5-1)(Test sequence IV : Performance under conditional short-circuit current)	-	208000	-
5.5(Electrical durability)	-	200000	-
7.2(General design inspection)	-	20000	-
7.3.1(General)	-	0	Covered under main cl.
7.3.2(Robustness of a button actuator)	-	25000	-
5.2 (K.8.3.5 of IS/IEC 60947-5-1 : 2009)(Mechanical operation at limits of temperature)	-	30000	-
5.2 (K.8.3.6 of IS/IEC 60947-5-1 : 2009)(Verification of direct opening action)	-	20000	-
5.2 ( K.8.3.7 of IS/IEC 60947-5-1 : 2009)(Verification of robustness of the actuating system)	-	25000	-
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence IV : Dielectric verification)	-	12960	-
5.4 (Annex C of IEC 60947-1)(Test sequence V : Degree of protection of enclosed control circuit devices)	-	48000	-
5.4 (8.2.5 of IS 60947-5-1)(Test sequence V : Verification of actuation force or moment)	-	7500	-
5.4 (7.1.3 of IS 60947-5-1)(Test sequence VI : Measurement of clearances and creepage distances)	-	7500	-
5.4 (8.2.6 of IS 60947-5-1)(Test sequence VI : Verification of limitation of rotation of a rotary switch)	-	7500	-
7.7.1(General)	-	0	Covered under main cl.
A.3.2.3(Electrical durability)	-	0	Covered under electrical durability
A.3.2.2(Mechanical durability)	-	0	Covered under Mechanical durability
7.1(General)	-	0	Covered under main cl.
7.8.1(Disengagement of wire or rope)	-	10000	-
A.3.2.1(General)	-	0	Covered under main cl.
4(Marking and product information)	-	15000	-
7.3.3(Durability test)	-	0	already covered
7.4(Conditioning procedures)	-	0	already covered
7.5(Shock test)	-	0	already covered
7.6(Vibration tests)	-	0	already covered
7.7.2(Opening test)	-	0	already covered
7.7.3(Latching test for button-type emergency device)	-	0	already covered
7.7.4(Resetting test)	-	0	already covered
7.7.5(Impact test for button type actuators)	-	0	already covered
5.2 (K.8.3.4 of IS/IEC 60947-5-1 : 2009)(Performance under conditional short-circuit current)	-	0	already covered
5.3(Degrees of protection of enclosed equipment)	-	0	already covered
5.4 (8.3.3.2 of IS 60947-5-1)("Test Sequence I : Operating Limits of contactor relays")	-	0	already covered
5.4 (8.3.3.3 of IS 60947-5-1)(Test Sequence I : Temperature Rise)	-	0	already covered
5.4 (8.3.3.4 of IS 60947-5-1)(Test Sequence I : Dielectric Properties)	-	0	already covered
5.4 (8.2.4 of IEC 60947-1)(Test Sequence I : Mechanical properties of Terminal)	-	0	already covered
5.4 (8.3.3.5.2 of IS 60947-5-1)(Test sequence II : Making and breaking capacities of switching elements under normal conditions)	-	0	already covered
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence II : Dielectric verification)	-	0	already covered
5.4 (8.3.3.5.3 of IS 60947-5-1)(Test sequence III : Making and breaking capacities of switching elements under abnormal conditions)	-	0	already covered
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence III : Dielectric verification)	-	0	already covered
5.4 (8.3.4 of IS 60947-5-1)(Test sequence IV : Performance under conditional short-circuit current)	-	0	already covered
5.5(Electrical durability)	-	0	already covered
7.2(General design inspection)	-	0	already covered
7.3.1(General)	-	0	already covered
7.3.2(Robustness of a button actuator)	-	0	already covered
5.2 (K.8.3.5 of IS/IEC 60947-5-1 : 2009)(Mechanical operation at limits of temperature)	-	0	already covered
5.2 (K.8.3.6 of IS/IEC 60947-5-1 : 2009)(Verification of direct opening action)	-	0	already covered
5.2 ( K.8.3.7 of IS/IEC 60947-5-1 : 2009)(Verification of robustness of the actuating system)	-	0	already covered
5.4 (8.3.3.5.5 b of IS 60947-5-1)(Test sequence IV : Dielectric verification)	-	0	already covered
5.4 (Annex C of IEC 60947-1)(Test sequence V : Degree of protection of enclosed control circuit devices)	-	0	already covered
5.4 (8.2.5 of IS 60947-5-1)(Test sequence V : Verification of actuation force or moment)	-	0	already covered
5.4 (7.1.3 of IS 60947-5-1)(Test sequence VI : Measurement of clearances and creepage distances)	-	0	already covered
5.4 (8.2.6 of IS 60947-5-1)(Test sequence VI : Verification of limitation of rotation of a rotary switch)	-	0	already covered
7.7.1(General)	-	0	already covered
A.3.2.3(Electrical durability)	-	0	already covered
A.3.2.2(Mechanical durability)	-	0	already covered
7.1(General)	-	0	already covered
7.8.1(Disengagement of wire or rope)	-	0	already covered
A.3.2.1(General)	-	0	already covered
4(Marking and product information)	-	0	already covered
5.1(Utilization categories for switching elements)	-	0	already covered

07 Nov, 2026

-
Included w.e.f. 09.09.2024 All ratings except wire type switches

7369

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	500000	-
Cl 7.2.2(SIZE (width))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.2.2(SIZE (Height))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.3.2(SIZE (width))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.3.2(SIZE (Height))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.4.2(SIZE (width))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.4.2(SIZE (Height))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.5.2(SIZE (width))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl 7.5.2(SIZE (Height))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.3.1(MOISTURE CONTENT)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.2.7(Vision Pane (Uninsulated door) Width)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.2.7(Vision Pane (Uninsulated door) Height)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.2.7(Vision Pane (Insulated door) Width)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.2.7(Vision Pane (Insulated door) Height)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.3.4(Vision Pane (Width))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
7.3.4(Vision Pane (Height))	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.2.4(Fire Door Frames)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.2.5(Door Leaf)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.2.8(Louvres)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.4.3(Construction)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.5.3(Construction of Sliding Door Leaf)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-11.3.1(Walls)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-11.4.1(Closing Devices)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-11.4.2(Releasing Devices)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-6(VISION PANE ON FIRE DOORS)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.5.4(General Requirement of Fire Rated Sliding Door)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.6(General Requirement of Fire Doors)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION
Cl-7.3.3(Construction)	-	0	PART OF THE TESTING PROCESS. SPECIMEN INSPECTION AND VERIFICATION

27 Nov, 2027

-
-

7370

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

ALL

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	29900	-
7.2(Type of installation)	-	29900	-
7.3(Types of inlets)	-	29900	-
7.4(Clamping means)	-	29900	-
7.5(Minimum temperature during installation)	-	29900	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	29900	-
7.9(The provision for fixing accessories to the boxes )	-	29900	-
7.1(The method of fixing the terminals)	-	29900	-
8.1(marking)	-	29900	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	29900	-
8.3(BIS Certification Marking)	-	29900	-
9.0(Dimensions)	-	29900	-
10.0(Protection against electric shock)	-	29900	-
11.0(PROVISION FOR EARTHING)	-	29900	-
12.0(Constructions)	-	29900	-
13.0(Resistance to ingress of solid objects)	-	29900	-
13.0(Resistance toharmful ingress of water)	-	29900	-
13.0(Resistance to ageing)	-	29900	-
14.0(insultation resistance)	-	29900	-
14.0(electric strength)	-	29900	-
15.0(Mechanical strength)	-	29900	-
16.0(resistance to heat)	-	29900	-
17.0(creepage distance)	-	29900	-
17.0(clearances)	-	29900	-
17.0(distance through seating compund)	-	29900	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	29900	-
19.0(Resistance to tracking)	-	29900	-
20.0(Resistance to corrosion)	-	29900	-
21.0(Electromagnetic compatibility (EMC))	-	29900	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024

7371

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 16947 (2018)

Fire resistance tests for doors with glass panes, openable glass windows and sliding glass doors

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9(Integrity, Insulation, Radiation)	-	500000		-

27 Nov, 2027

-
-

7372

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 16945 (2018)

Fire resistance test for glass walls

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation, Radiation)	-	500000		-

27 Nov, 2027

-
-

7373

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 11188 : Part 3 (1991)

Vault (Strong Room) doors:: Part 3 tests for fire resistance (First Revision)

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5()	-	500000		-

27 Nov, 2027

-
-

7374

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 17518 : Part 2 (2021)

Fire-resistance tests : Part 2 Lift landing door assemblies

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12(Integrity, Insulation, Radiation)	-	500000		-

27 Nov, 2027

-
-

7375

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS 17518 : Part 1 (2022)

Fire resistance tests Door and shutter assemblies Part 1: General requirements Adoption of ISO 3008-1:2019

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11(Integrity, Insulation)	-	500000		-

27 Nov, 2027

-
-

7376

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS/ISO 834 : Part 8 (2002)

Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	500000		-

27 Nov, 2027

-
-

7377

Aadit Fire Testing Laboratory Private Limited, Gummidipoondi

6182836

IS/ISO 834 : Part 1 (1999)

Fire-Resistance Tests Elements of Building Construction Part 1 General Requirements

500000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10(Integrity, Insulation)	-	500000		500000 FOR VERTICAL SPECIMENS AND 900000 FOR HORIZONTAL SPECIMENS (NON-LOAD BEARING)

27 Nov, 2027

-
-

7378

CIPET, Hajipur

5118334

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

49630 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Drop Impact Test)	-	1600	25% Discount in Test Charges. (Rs. 1100 for Testing Charges & Rs. 500 for Specimen Charges)
4.1(Raw Meterial)	-	3250	25% Discount in Test Charges. (Raw Material Identification Rs 1050 & Overall Migration Rs1700 + Rs 500)
4.2("Fabric a) Width of Tape")	-	500	25% Discount in Test Charges.
4.2("Fabric b) Linear Density")	-	1000	(For Width & Thickness of Tape)
4.2("Fabric c) Mesh")	-	500	25% Discount in Test Charges. (Mesh Size)
4.2("Fabric c) Mesh")	-	1050	25% Discount in Test Charges. (For Identification of Fabric)
4.2("Fabric d) Unlaminated Fabric Mass")	-	500	25% Discount in Test Charges.
4.3(Sacks)	-	500	25% Discount in Test Charges.
4.4.1(Loose Liner)	-	1050	Liner Identification
4.4.1(Thickness of Linear)	-	500	25% Discount in Test Charges.
4.4.2(Visual Observation)	-	500	25% Discount in Test Charges.
4.4.3(Bottom Seam of Loose Liner)	-	500	25% Discount in Test Charges.
4.5(Mass of The Lamination)	-	1000	25% Discount in Test Charges. (Rs 500 for GSM & Rs 500 for Mass)
4.5(Laminated Fabric)	-	1550	25% Discount in Test Charges. (Rs 1050 for Identification & 500 for Lamination and Construction)
4.5(Lamination Over Hang of the fabric after trimming)	-	500	25% Discount in Test Charges.
4.6.1(Distance between the Two Row of Stitches)	-	1550	25% Discount in Test Charges. (Rs 1050 for Identification & Rs 500 for Distance bet. two rows of stitches.
4.6.1(Distance of outer stitch from the edge of the bag)	-	500	25% Discount in Test Charges.
4.6.1(Depth of the Stitch( Double fold))	-	500	25% Discount in Test Charges.
4.6.1(No.of Stitches/dm)	-	500	25% Discount in Test Charges.
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1600	25% Discount in Test Charges. (Test Charge Rs 1100 + Rs 500 specimen Charges)
4.6.2(Breaking Load for UV Stabilized sack)	-	2000	25% Discount in Test Charges. (For Presence of UV stabilizer in stitching tread)
4.7(Mouth of the Sack)	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	0	25% Discount in Test Charges. Already Included
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500	25% Discount in Test Charges.
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	2700	25% Discount in Test Charges. (Rs 2200 for Testing + Rs 500 for Specimen)
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1600	25% Discount in Test Charges. (Rs 1100 for Testing + Rs 500 for Specimen)
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	1600	25% Discount in Test Charges. Width Wise Lamination Joint Breaking strength (Test Charge Rs 1100 + Rs 500 for Specimen)
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0	25% Discount in Test Charges. (Already Included in Tensile Breaking Strength)
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	1200	25% Discount in Test Charges.
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	0	25% Discount in Test Charges. (Already Included)
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.2(Visual Observation)	-	500	25% Discount in Test Charges.
Cl. No.5.3(Mass of Bale)	-	0	25% Discount in Test Charges.
Cl. No.5.4(Breaking Strength of Fabric)	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.6(Drop Impact testing of filled sack)	-	0	25% Discount in Test Charges. (Already Included)
Cl. No.5.7(UV Resistance)	-	12880	25% Discount in Test Charges. (UV Exposure Charges Rs 10180 + Breaking Strength Before & After UV Rs 2200 + Rs 500 for specimen preparation)
Cl. No.6.1(Printing on Sacks)	-	0	25% Discount in Test Charges.
Cl. No.6.2.(Packaging)	-	0	25% Discount in Test Charges.
Cl. No.6.3.(Marking on the Bale)	-	0	25% Discount in Test Charges.
Cl. No.6.4.(BIS Certification Marking)	-	0	25% Discount in Test Charges.
Cl. No.6.5.(Storage)	-	0	25% Discount in Test Charges.

07 Oct, 2028

-
Included w.e.f. 20.08.2024

7379

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

CLASS-1,CLASS-2,CLASS-3,CLASS-4 SIZE(OD): 40-200 mm for PE Pipes & HDPE couplers

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	300	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	300	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	7000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1500	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4500	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2000	-
7.5(Density)	-	750	-
7.6(Melt Flow Rate)	-	1500	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	1000	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	300	-
5.1 table -1(DIMENSIONS OF PIPES)	-	300	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1500	-
6.1.3(Weldability Test- b) Acceptance test)	-	1500	-
3(Quick Coupled pipes)	-	1500	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	2000	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
4.1 (b)(HDPE couplers —)	-	2000	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	0	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	500	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	1500	-
Cl.4.1.3(Den sity Test)	-	750	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	1500	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	750	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	300	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	0	-
7.2.3(Weldability Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	500	0

17 Mar, 2028

-
Exclusion: Cl 4.1.6 (Antioxidant), Cl 4.2.2 (Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated)), Cl 6.3.5 (Material Identification - Saddle)

7380

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

TYPE A&B, Size: 40 to 315 mm, All ends

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	ok
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	3000	ok
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	950	ok
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	950	ok
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	950	ok
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	950	ok
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	950	ok
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	950	ok
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	200	ok
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	ok
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1500	ok
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2850	ok
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	4000	ok
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	4000	ok
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	950	ok
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	ok
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1900	ok
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1900	ok
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	4750	ok
8.6(Effect on Water Test)	-	4750	ok
14(Marking)	-	300	ok

17 Mar, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number