BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7711

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17509 (2021)

Disposable Baby Diaper Specification

16100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.7.1(pH Value)	-	250	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	3050	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	600	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	2850	-
Clause no.6(Diaper Length)	-	125	-
Clause no.6(Diaper Width)	-	125	-
Clause no.6(Diaper Crotch)	-	125	-
Clause no.6(Absorbent Core Length)	-	125	-
Clause no.6(Absorbent Core Width Back)	-	125	-
Clause no.6(Absorbent Core Width Front)	-	125	-
Clause no.6(Core Cortch)	-	125	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Covered under rewet under load
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	1375	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Covered under rewet under load
Clause no.7.5(Phthalate Test)	-	3500	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	2600	-
Clause no. 3(Material)	-	1000	Covers testing charges for clause 3.0,4.0,5.0,9.0,10.0
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Covered under material
Clause no. 3.2(Absorbent Core)	-	0	Covered under material
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Covered under material
Clause no. 4(Fastening & Securing Mechanism)	-	0	Covered under material
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Covered under material
Clause no.6(Type and Size: FOR X LARGE)	-	0	Covered under material
9 & 9.1(Marking)	-	0	Covered under material
10(Packing)	-	0	Covered under material

-
-

7712

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

Disposable Sanitary Napkin/All sizes

11925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	250	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	675	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	3050	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	600	-
Cl 7.4(Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10)	-	2600	Except skin irritation & sensitization
Cl 5(SIZES, Regular )	-	250	-
3.1(Cover/Top sheet)	-	1000	The testing charges covers Clause 3,4,6,9 and 10
3.2(Absorbent Core)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
3.3(Barrier or Bottom Sheet)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
4.1 (1)(Type and shapes of sanitary napkins)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
4.2(Sanitary napkins shape & design)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
6.0(Manufacture, workmanship & finish)	-	0	The testing charges of Rs.1000 covers Clause 3,4,6,9 and 10 (mentioned in Clause 3.1)
7.6(Pthalate test)	-	3500	-
Cl 5(SIZES, Large)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(SIZES, Extra Large)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(SIZES, XXL)	-	0	The testing charge of Rs.250 is covered under Clause 5 Sizes Regular
Cl 5(Absorbent Capacity, Regular )	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, Large)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, Extra Large)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption
Cl 5(Absorbent Capacity, XXL)	-	0	The testing charges are covered under Clause 7.2. Ability to withstand pressure after absorption

-
-

7713

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(POWER INPUT AND CURRENT)	-	1500	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(IMPULSE VOLTAGE TEST)	-	1000	-
15(HUMIDITY TREATMENT TEST)	-	2500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	2000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1500	-
22(CONSTRUCTION)	-	1500	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	2000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2500	-
27(PROVISION FOR EARTHING)	-	2500	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3000	-
30(RESISTANCE TO HEAT AND FIRE)	-	3000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.32(Oxygen bomb for rubber material)	-	2000	-
22.46(Software)	-	1000	-
Cl-19.11.4.1(Electrostatic discharge)	-	1000	-
Cl-19.11.4.3(Fast transient bursts)	-	1000	-
Cl-19.11.4.4(Surge Immunity test)	-	1000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	1000	-
Cl-19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included w.e.f.26.11.2024 exclusion Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.5 (Immunity to conducted discharge)

7714

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	500	-
4(INSULATION : MATERIALS)	-	500	-
5.1(FILLER AND INNER SHEATH)	-	500	-
5.2(FILLER AND INNER SHEATH)	-	500	-
6(ARMOURING)	-	500	-
7(OUTER SHEATH)	-	500	-
8.1(CONDUCTOR: CONSTRUCTION)	-	500	-
8.2(PROTECTIVE BARRIER)	-	500	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	500	-
9.1(Insulation Applied by extrusicn)	-	500	-
9.2(Thickness of Insulation - Average)	-	1000	-
9.3(Thickness of Insulation - Minimum)	-	1000	-
9.4(Application of Insulation)	-	500	-
10.1(Core Identification)	-	500	-
10.2(Core Identification- Neutral)	-	500	-
10.3(Core Identification by number )	-	500	-
10.4(Core Identification by number - Neutral )	-	500	-
11(LAVING UP OF CORES)	-	500	-
12.1 & 12.2(Inner sheath : Application)	-	500	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	500	-
13.1.2(Armouring: Coverage )	-	1500	-
13.1.3(Armouring: Direction of Lay )	-	500	-
13.2(Type of armour )	-	500	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-
13.4(Armour: Joint)	-	500	-
13.5(Armouring : Resistance Test)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	500	-
14.2(Colour of outer sheath)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	1000	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	2000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	5000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	2000	-
15.1 e) vi) (Sheath : Heat shock test)	-	1000	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	-
16.2(HIGH VOLTAGE TEST )	-	2000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1000	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	1000	-
16.9(Oxygen Index Test)	-	3000	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	3000	-
16.14(Temperature Index)	-	2000	-
17.1(Manufacturer'. identification)	-	500	-
17.2(cable Indentification )	-	500	-
17.3(cable Code )	-	500	-
15.4 (a)(Cold bend)	-	1000	-
15.4 (b)(Cold impact)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 4(Copper purity test)	-	2500	-
Cl No. 16.15(Smoke density test)	-	2000	-
Table 2(Cold Impact test for Outer sheath)	-	1000	-
Table 2(Cold bend test for Outer sheath)	-	1000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl 16(Halogen Acid Gas Test)	-	2000	-
Cl.8(Conductor)	-	500	-
Cl.8(Conductor)	-	500	-
Cl.8(Conductor)	-	500	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	1000	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	1000	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	1000	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-

11 Mar, 2028

-
-

7715

Novateur Electrical and Digital Systems Pvt Ltd, Sinnar, Nasik

7176426

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

1450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	20000	-
4(Classification)	-	20000	-
5.3.2(Rated voltages)	-	20000	-
5.3.2.1(Rated operational voltage)	-	20000	-
5.3.2.2(Rated insulation voltage)	-	20000	-
5.3.2.3(Rated impulse withstand voltage)	-	20000	-
5.3.3(Currents)	-	20000	-
5.3.3.2(Conventional free air thermal current)	-	20000	-
5.3.3.3(Conventional enclosed thermal current)	-	20000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	20000	-
5.3.3.5(Rated uninterrupted current)	-	50000	-
5.3.4(Rated frequency)	-	20000	-
5.3.5(Rated duty)	-	50000	-
5.3.5.2(Eight-hour duty)	-	50000	-
5.3.5.3(Uninterrupted duty)	-	50000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	20000	-
5.3.6.2(Rated making capacity)	-	100000	-
5.3.6.3(Rated breaking capacity)	-	100000	-
5.3.7(Short-circuit characteristics)	-	100000	-
5.3.7.1(Rated short-time withstand current)	-	100000	-
5.3.7.2(Rated short-circuit making capacity)	-	100000	-
5.3.7.4(Rated conditional short-circuit current)	-	100000	-
5.4(Utilization category)	-	20000	-
5.5(Control circuits)	-	20000	-
5.6(Auxiliary circuits)	-	20000	-
5.7(Relays and releases)	-	20000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	20000	-
6.2.2(Marking)	-	50000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	50000	-
7(Normal service, mounting and transport conditions)	-	20000	-
8.1.1(General)	-	20000	-
8.2.1.2(Limits of operation of power operated equipment)	-	20000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	20000	-
8.2.1.4(Limits of operation of shunt releases)	-	20000	-
8.2.2(Temperature-rise)	-	40000	-
8.2.3(Dielectric properties)	-	50000	-
8.2.3.2(Impulse withstand voltage)	-	50000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	50000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	50000	-
8.2.4.1(Making and breaking capacities)	-	100000	-
8.2.4.2(Operational performance)	-	100000	-
8.2.4.3(Mechanical durability)	-	50000	-
8.2.4.4(Electrical durability)	-	100000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	100000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	50000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	50000	-
9.1.3.2(Mechanical operation test)	-	100000	-
9.1.3.3(Dielectric test)	-	50000	-
9.1.4(Sampling tests)	-	20000	-
9.1.5Special tests(Special tests)	-	20000	-
9.2(Compliance with constructional requirements)	-	20000	-
9.3.4.2(Temperature-rise)	-	40000	-
9.3.4.3(Test of dielectric properties)	-	50000	-
9.3.4.4(Making and breaking capacities)	-	100000	-
9.3.4.5(Dielectric verification)	-	50000	-
9.3.4.6(Leakage current)	-	30000	-
9.3.5.2(Operational performance test)	-	50000	-
9.3.6.2(Short-time withstand current test)	-	100000	-
9.3.6.3(Short-circuit making capacity test)	-	100000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	100000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	150000	-
9.3.8.2(Overload test)	-	100000	-
9.5.2(Mechanical durability)	-	50000	-
9.5.3(Electrical durability)	-	100000	-
D.7.1.1(Ambient air temperature)	-	20000	-
D.8.1.4(Clearances and creepage distances)	-	50000	-
D.9.3.10(Thermal cycling test)	-	0	Already mentioned in Test Facility not available for clause no. D.9.3.10(Thermal cyclic test)
8.1.7.2(Additional constructional requirements)	-	20000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	40000	-
9.3.4.8(Strength of actuator mechanism)	-	50000	-
9.3.5.3(Dielectric verification)	-	50000	-
9.3.5.5(Temperature-rise verification)	-	40000	-
9.3.6.4(Dielectric verification)	-	50000	-
9.3.6.6(Temperature-rise verification)	-	40000	-
9.3.7.4(Dielectric verification)	-	50000	-
9.3.7.6(Temperature-rise verification)	-	40000	-
9.3.8.3(Dielectric verification)	-	50000	-
9.3.8.5(Temperature-rise verification)	-	40000	-
9.3.5.4(Leakage current)	-	30000	-
9.3.6.5(Leakage current)	-	30000	-
9.3.7.5(Leakage current)	-	30000	-
9.3.8.4(Leakage current)	-	30000	-
9.1.3.2(Mechanical operation test)	-	100000	-
E.9.2(Current cycling test)	-	150000	-
E.9.2.4(Temperature measurements)	-	40000	-
8.1.2.2(Glow wire testing)	-	50000	-
3.1(General)	-	20000	-
4(Classification)	-	20000	-
5.3.2(Rated voltages)	-	20000	-
5.3.2.1(Rated operational voltage)	-	20000	-
5.3.2.2(Rated insulation voltage)	-	20000	-
5.3.2.3(Rated impulse withstand voltage)	-	50000	-
5.3.3(Currents)	-	20000	-
5.3.3.2(Conventional free air thermal current)	-	20000	-
5.3.3.3(Conventional enclosed thermal current)	-	20000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	20000	-
5.3.3.5(Rated uninterrupted current)	-	50000	-
5.3.4(Rated frequency)	-	20000	-
5.3.5(Rated duty)	-	50000	-
5.3.5.2(Eight-hour duty)	-	50000	-
5.3.5.3(Uninterrupted duty)	-	50000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	20000	-
5.3.6.2(Rated making capacity)	-	100000	-
5.3.6.3(Rated breaking capacity)	-	100000	-
5.3.7(Short-circuit characteristics)	-	100000	-
5.3.7.1(Rated short-time withstand current)	-	100000	-
5.3.7.2(Rated short-circuit making capacity)	-	100000	-
5.3.7.4(Rated conditional short-circuit current)	-	100000	-
5.4(Utilization category)	-	20000	-
5.5(Control circuits)	-	20000	-
5.6(Auxiliary circuits)	-	20000	-
5.7(Relays and releases)	-	20000	-
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	20000	-
6.2.2(Marking)	-	50000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	50000	-
7(Normal service, mounting and transport conditions)	-	20000	-
8.1.1(General)	-	20000	-
8.2.1.2(Limits of operation of power operated equipment)	-	20000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	20000	-
8.2.1.4(Limits of operation of shunt releases)	-	20000	-
8.2.2(Temperature-rise)	-	40000	-
8.2.3(Dielectric properties)	-	50000	-
8.2.3.2(Impulse withstand voltage)	-	50000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	50000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	100000	-
8.2.4.1(Making and breaking capacities)	-	100000	-
8.2.4.2(Operational performance)	-	100000	-
8.2.4.3(Mechanical durability)	-	50000	-
8.2.4.4(Electrical durability)	-	50000	-
8.2.5(Ability to make, break or withstand short-circuit currents)	-	100000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	20000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	100000	-
9.1.3.2(Mechanical operation test)	-	100000	-
9.1.3.3(Dielectric test)	-	50000	-
9.1.4(Sampling tests)	-	20000	-
9.1.5Special tests(Special tests)	-	20000	-
9.2(Compliance with constructional requirements)	-	20000	-
9.3.4.2(Temperature-rise)	-	40000	-
9.3.4.3(Test of dielectric properties)	-	50000	-
9.3.4.4(Making and breaking capacities)	-	100000	-
9.3.4.5(Dielectric verification)	-	50000	-
9.3.4.6(Leakage current)	-	30000	-
9.3.5.2(Operational performance test)	-	100000	-
9.3.6.2(Short-time withstand current test)	-	100000	-
9.3.6.3(Short-circuit making capacity test)	-	100000	-
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	100000	-
9.3.7.3(Fuse protected short-circuit withstand)	-	150000	-
9.3.8.2(Overload test)	-	100000	-
9.5.2(Mechanical durability)	-	50000	-
9.5.3(Electrical durability)	-	50000	-
D.7.1.1(Ambient air temperature)	-	20000	-
D.8.1.4(Clearances and creepage distances)	-	50000	-
8.1.7.2(Additional constructional requirements)	-	20000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	20000	-
9.3.4.7(Temperature-rise verification)	-	40000	-
9.3.4.8(Strength of actuator mechanism)	-	50000	-
9.3.5.3(Dielectric verification)	-	50000	-
9.3.5.5(Temperature-rise verification)	-	40000	-
9.3.6.4(Dielectric verification)	-	50000	-
9.3.6.6(Temperature-rise verification)	-	40000	-
9.3.7.4(Dielectric verification)	-	50000	-
9.3.7.6(Temperature-rise verification)	-	40000	-
9.3.8.3(Dielectric verification)	-	50000	-
9.3.8.5(Temperature-rise verification)	-	40000	-
9.3.5.4(Leakage current)	-	30000	-
9.3.6.5(Leakage current)	-	30000	-
9.3.7.5(Leakage current)	-	30000	-
9.3.8.4(Leakage current)	-	30000	-
9.1.3.2(Mechanical operation test)	-	100000	-
E.9.2(Current cycling test)	-	150000	-
E.9.2.4(Temperature measurements)	-	40000	-
8.1.2.2(Glow wire testing)	-	50000	-

21 Feb, 2027

-
Included. w.e.f.09.12.2024 Exclusion CL 8.1.7.1 (General) CL 8.2.1 (Operating conditions) CL 8.2.1.1 (General) CL 8.2.8 (Critical load current performance: DC equipment) CL 9.3.3.6 (DC test current ripple) CL 9.3.4.4.3 (Characteristics of transient recovery voltage) CL 9.3.9.2 (Determination of critical load current) CL 9.4 (Electromagnetic compatibility tests) CL 9.5.4 (Damp heat, salt mist, vibration and shock) CL D.8.1.12 (Degrees of protection of enclosed equipment) CL D.9.3.11 (Climatic test) CL D.9.3.12 (Temperature-rise verification with solar effects – Outdoor units only) CL CL E.9.3.1 (Flexion test) CL E.9.3.2 (Pull-out test) CL 9.3.9.3 (Critical load current performance) CL D.9.3.10 (Thermal cycling test) CL 9.4.2 (Immunity) CL 9.4.3 (Emission) Capacity: Short Circuit Test: 63A to 50kA @ 415 V Making & Breaking capacities: up to 50kA Short time withstand:50kA Temperature rise test: Upto 4000A Electrical Endurance test: Upto 2500A @ 415V Mechanical Endurance test HV (Upto 15kV AC/DC) Leakage Current (Upto 300mA) Impulse (Upto 20kVp) Voltage source 50 to 1000VAC/DC

7716

BIS, Southern Regional Laboratory (SRL)

None

IS 1328 (1996)

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions & Tolerances - Width - Cl. 8)	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-

-
Quantity Required: 2 Nos of Full Sheets

7717

BIS, Southern Regional Laboratory (SRL)

None

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
12, 12.1 (MARKING)	-

-
Quantity Required: 2 Nos of Full Sheets

7718

BIS, Southern Regional Laboratory (SRL)

None

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Please check remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
cl. 11.1 (marking - BIS certification marking)	-

-
Quantity Required: 2 Nos of Block Boards

7719

CIPET, Hyderabad

6111634

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

Polyethylene/ Class 1 - 3 / Size - 12 -32mm

17725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	6900	25 % DISCOUNT FOR BIS
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	25 % DISCOUNT FOR BIS
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	25 % DISCOUNT FOR BIS
Cl-6.0(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	25 % DISCOUNT FOR BIS
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	25 % DISCOUNT FOR BIS
Cl-7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
Cl-7.3(Tensile Test)	-	1300	25 % DISCOUNT FOR BIS
Cl-7.3.1(Test Piece)	-	500	25 % DISCOUNT FOR BIS
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	25 % DISCOUNT FOR BIS
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	25 % DISCOUNT FOR BIS
6(Visual Appearance)	-	500	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	1000	25 % DISCOUNT FOR BIS
7.1 & Table 2(Hydraulic Characteristics)	-	3000	25 % DISCOUNT FOR BIS
7.2(Reversion Test)	-	1200	25 % DISCOUNT FOR BIS
7.3(Tensile Strength)	-	1300	25 % DISCOUNT FOR BIS
7.3(Elongation at Break)	-	1300	25 % DISCOUNT FOR BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % DISCOUNT FOR BIS
4.2(a)(Carbon Black Content-IS 2530)	-	925	25 % DISCOUNT FOR BIS
4.2(b)(Carbon Black Dispersion-IS 2530)	-	925	25 % DISCOUNT FOR BIS
Cl-4.1(Material)	-	6900	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	3000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1000	-
Cl-7.2(Reversion Test)	-	700	-
Cl-7.3(Tensile Test)	-	1300	-
Cl-7.3.1(Test Piece)	-	500	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.1 & Table 2(Hydraulic Characteristics)	-	1000	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Strength)	-	1300	-
7.3(Elongation at Break)	-	1300	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
4.2(a)(Carbon Black Content-IS 2530)	-	925	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	-

23 Feb, 2027

-
Included w.e.f. 20.11.2024

7720

BIS, Southern Regional Laboratory (SRL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-8.3 (Edge Straightness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (i) b ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-9.9, Table-3 (ii) a ((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (ii) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-11.1 (Marking)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.10 (Retention of Preservative)	-

-
Quantity Required: 2 Nos of Marine Plywood Sheets Except Steady-state Formaldehyde emission (optional test) as per Cl.9.12

7721

BIS, Southern Regional Laboratory (SRL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-8.1 (Dimensions -length)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
Quantity Required: 2 Nos of Full Sheets Steady-state Formaldehyde emission (optional test) as per Cl.11.7

7722

Aaditech Test and Calibration Lab LLP

8179926

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.3(Standard Mark on Conduit)	-	200	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
10(Resistance to Heat -Ball presure test)	-	1000	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1000	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1500	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1500	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	-
10.0(Resistance to Heat -Ball presure test)	-	1000	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1500	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	1000	-
9.3(Compression Test at Full force applied (On load))	-	1000	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	1000	-
9.2(Bending Test At Room Temp)	-	1000	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	700	-
7.4(Unifomity of The wall Thickness)	-	500	-
7.3(Length of conduit)	-	500	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	500	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	500	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	500	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	500	-
6.3(Standard Mark on Conduit)	-	200	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	200	-
6.1 - d(Marking)	-	200	-
6.1 - c(Marking)	-	200	-
6.1 - b(Marking)	-	200	-
6.1 - a(Marking)	-	200	-
6.1(Marking)	-	-	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	-	-
6.3(Standard Mark on Conduit)	-	-	-
7.1.1(Maximum and minimum outside diameter of socket)	-	-	-
7.1.1 Table-2(Length of Socket end)	-	-	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	-	-
7.2(Minimum inside diameter of conduit)	-	-	-
7.3(Length of conduit)	-	-	-
7.4(Unifomity of The wall Thickness)	-	-	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	-	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	-	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	-	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	-	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	-	-
10(Resistance to Heat -Ball presure test)	-	-	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	-	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	-	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	-	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	-	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	-	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	-	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	-	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	-	-
10.0(Resistance to Heat -Ball presure test)	-	-	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	-	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	-	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	-	-
9.3(Compression Test at Full force applied (On load))	-	-	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	-	-
9.2(Bending Test At Room Temp)	-	-	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	-	-
7.4(Unifomity of The wall Thickness)	-	-	-
7.3(Length of conduit)	-	-	-
7.2 Fig.3(Minimum inside diameter of conduit)	-	-	-
7.1.2 Fig.2(Minimum outside diameter of conduit)	-	-	-
7.1.2 Fig.1(Maximum outside diameter of conduit)	-	-	-
7.1.1 Table-2(Length of Socket end)	-	-	-
7.1.1 Fig.8(Maximum inside diameter of socket)	-	-	-
7.1.1 Fig.7(Maximum outside diameter of socket)	-	-	-
6.3(Standard Mark on Conduit)	-	-	-
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	-	-
6.1 - d(Marking)	-	-	-
6.1 - c(Marking)	-	-	-
6.1 - b(Marking)	-	-	-
6.1 - a(Marking)	-	-	-

-
Included.w.e.f.23.12.2024

7723

BIS, Central Laboratory (CL)

None

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Cl.4.1 (Carbon)	-
As per Cl.4.1 (Sulphur)	-
As per Cl.4.1 (Phosphorus)	-
As per Cl.4.1 (Manganese)	-
As per Cl.4.1 (Nitrogen)	-
As per Cl.4.1 (Silicon)	-
As per Cl.4.1 (Aluminium)	-
As per Cl.4.1 (Vanadium)	-
As per Cl.4.1 (Niobium)	-
As per Cl.4.1 (Copper)	-
As per Cl.4.1 (Titanium)	-
As per Cl.4.1 (Boron)	-
Cl-9.1 (The nominal thickness of sheets)	-

-
-

7724

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1865 (1991)

Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Grades)	-	14500	For complete testing
4.1(General requirements)	-	14500	For complete testing
5(Manufacture)	-	14500	For complete testing
6(Workmanship and finish)	-	14500	For complete testing
7(Heat treatment)	-	14500	For complete testing
9(Micro structure)	-	14500	For complete testing
10.1(Separately-Cast Test Samples)	-	14500	For complete testing
10.2(Cast-on Test Samples)	-	14500	For complete testing
11.1(Batch)	-	14500	For complete testing
11.2(Number of Tests per Batch)	-	14500	For complete testing
12.1(Tensile Strength)	-	14500	For complete testing
12.2(Impact Test)	-	14500	For complete testing
13.1(Tensile Test)	-	14500	For complete testing
13.2(Hardness Test)	-	14500	For complete testing
13.3(Impact Test)	-	14500	For complete testing
14(Validity of tests)	-	14500	For complete testing
15(Retest)	-	14500	For complete testing
16(Additional test)	-	14500	For complete testing
17(Marking)	-	14500	For complete testing

-
Included w.e.f. 13.01.2024

7725

BIS, Central Laboratory (CL)

None

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Medium Density Fibre (MDF) Board)	-
Cl-7 (Finish)	-
Cl-8.1 (Dimensions of prelaminated MDF)	-
Cl-8.2 (Tolerances)	-
Cl-8.2.1 (Edge straightness)	-
Cl-9.1 S.No-(1), i (Density, kg/m3)	-
Cl-9.1 S.No-(1), ii (Variation from mean density, percent)	-
Cl-9.1 S.No-(1), iii (Moisture content, percent)	-
Cl-9.1 S.No-(1), iv (Variation from mean moisture content, percent (absolute))	-
Cl-9.1 S.No-(1), vi (Internal bond strength, N/mm2, Min)	-
Cl-9.1 S.No-(1), vii,a (After cyclic test)	-
Cl-9.1 S.No-(1), vii,b (After accelerated water resistance test)	-
Cl-9.1 S.No-(1), x, (Screw withdrawal strength, ????????, Min)	-
Cl-9.1 S.No-(1), xv (Resistance to crack)	-
Cl-9.1 S.No-(1), xvi (Resistance to a cigarette burn)	-
Cl-12 (Marking)	-
Cl-9.1 S.No-(1), viii (Modulus of rupture, N/mm2 , Min)	-
Cl-9.1 S.No-(1), ix (Modulus of elasticity, N/mm2 , Min)	-
Cl-9.1 S.No-(1), xi (Formaldehyde content (Fc), mg/100 g for oven dry board)	-

-
Sample size required: One board for all tests; Facility available at CL: (1) Dimensions (Length,Width ,Thickness, Squareness,Edge Straightness) (2) Moisture Content, (3) Density (4)Linear expansion (5) Internal bond strength (6)Screw withdrawal strength (7) Water Absorption Test (8) Resistance to Crack (9) Resistance to Cigarette burn, (10) Modulus of rupture & Modulus of elasticity Sample Test Parameter not available in CL "Clauses 9.1 and 10.2.2 Linear expansion, Internal bond Strength (After cyclic test, After accelerated water resistance test),. Resistance to steam/water vapours,Resistance to stain,Abrasion resistance." SIZE: One Board For All Tests Sample Size without dimensional measurements: Length-1200 mm, width-1200

7726

Standard Testing and Compliance Private Limited

6178726

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6.0(Marking)	-	2000	15% discount to BIS
7.0(Construction)	-	5000	15% discount to BIS
8.0(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9.0(Provision for earthing)	-	1000	15% discount to BIS
10.0(Terminals)	-	1000	15% discount to BIS
11.0(External & Internal Wiring)	-	2000	15% discount to BIS
12.0(Protection against electric shock)	-	3000	15% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14.0(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17.0(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Exclusion: Electromechanical contact system (4.11.6), UV Radiation (cl.4.24, IS 10322(Part-1):2014, cl 17 photometric test.

7727

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

Footwear

61125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	200	-
Cl No.4.3(Whole Footwear)	-	0	-
4.3.1(Insole)	-	200	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1650	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1650	-
4.3.6(Energy Absorption at Seat Region)	-	1050	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	900	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	550	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	0	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	900	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	900	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	3500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	900	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	550	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1500	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	900	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	2025	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1050	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	1650	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1650	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	3500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	900	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	2500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	0	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1700	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1700	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	550	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1250	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	45000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3250	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1800	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1900	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	450	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	5500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4200	-
Clause 4.2 - 4.2.1(Construction)	-	200	-
Clause 4.2 - 4.2.2(Construction)	-	200	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	0	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1650	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1650	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1650	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	900	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	900	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	0	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.5, Table 3 i)(Tear strength)	-	900	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	2025	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	0	-
Clause 4.6, Table 4 i)(Thickness)	-	300	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	900	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1050	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	0	-
Clause 4.7, Table 5 i)(Thickness)	-	300	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	2025	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1050	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	0	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1650	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1650	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	3500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	900	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	2500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	200	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	300	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1650	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1050	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	1650	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	45000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1200	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	900	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	550	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	900	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	1500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	900	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	3500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1500	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	900	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	550	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1500	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	900	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	300	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	2025	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1050	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1650	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	3500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	900	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	2500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1700	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	550	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	1250	-
Clause 4.4, Table 2 iii)(Tear strength)	-	900	-
Cl No.4.1(Sampling and Conditioning)	-	-	-
Cl No.4.2(Construction)	-	-	-
Cl No.4.3(Whole Footwear)	-	-	-
4.3.1(Insole)	-	-	-
4.3.2(Toe spring height)	-	-	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
4.3.6(Energy Absorption at Seat Region)	-	-	-
4.3.7(Complete Shoe Flexing)	-	-	-
4.3.9(Slip Resistance)	-	-	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	-	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	-	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	-	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	-	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	-	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	-	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	-	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	-	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	-	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	-	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	-	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	-	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	-	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	-	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	-	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	-	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	-	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	-	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	-	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	-	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	-	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	-	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	-	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	-	-
Cl No . 5(MARKING AND PACKING)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Clause 4.2 - 4.2.1(Construction)	-	-	-
Clause 4.2 - 4.2.2(Construction)	-	-	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	-	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	-	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	-	-
Clause 4.4, Table 1 ii)(Tear strength)	-	-	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	-	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	-	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	-	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.5, Table 3 i)(Tear strength)	-	-	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	-	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.6, Table 4 i)(Thickness)	-	-	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	-	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	-	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	-	-
Clause 4.7, Table 5 i)(Thickness)	-	-	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	-	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	-	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	-	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	-	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	-	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	-	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	-	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	-	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	-	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	-	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	-	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	-	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	-	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	-	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	-	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	-	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	-	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	-	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	-	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	-	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	-	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	-	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	-	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	-	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	-	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	-	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	-	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	-	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	-	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	-	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	-	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	-	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	-	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	-	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	-	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	-	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	-	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	-	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	-	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	-	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	-	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	-	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	-	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	-	-
Clause 4.4, Table 2 iii)(Tear strength)	-	-	-

-
Colour fastness to light test scope restricted to exposure cycle A1 & B Included w.e.f 06.02.2025 Exclusion : Cl 4.3.8 Washability

7728

BIS, Eastern Regional Laboratory (ERL)

None

IS 10805 (2022)

Foot-Valves, Reflux Valves or NonReturn Valves and Bore Valves to be Used in Suction Lines of Agricultural Pumping Systems â Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions)	-
5.3 (Flange Dimensions)	-

-
Mechanical: Test facility not available for Seat Test, Housing Test, K-value test, frictional loss. Declaration required for nominal size of pipe and valve.

7729

TUV INDIA PVT LTD, PUNE

7139026

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	15000	N/A
5.2(Message Readability)	-	15000	N/A
5.1(Inputting of text)	-	15000	NA
5.2(Message Readability)	-	15000	NA
6(Marking)	-	15000	NA

31 Dec, 2026

-
-

7730

TUV INDIA PVT LTD, PUNE

7139026

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1500	N/A
8.1.1(Protection against live parts in all positions)	-	1500	N/A
8.1.2(Protection against live parts in openings)	-	1500	N/A
8.1.3(Protection against live parts in visible glowing heating elements)	-	1500	N/A
8.1.4(Protection against live parts against protective impedance)	-	1500	N/A
10.1(Power input)	-	1500	N/A
10.2(Current input)	-	1500	N/A
11.1(General)	-	0	N/A
11.2(General)	-	0	N/A
11.3(Heating)	-	10000	N/A
13.1(General)	-	0	N/A
13.2(Leakage current at operating temperature)	-	1500	N/A
13.3(Electric Strength at operating temperature)	-	1500	N/A
14(Transient Over Voltages)	-	1500	N/A
15.1(Ingress Protection test other than IPX0 (IP test))	-	1500	N/A
15.3(Humidity Test)	-	14400	N/A
16.0(General)	-	0	N/A
16.1(General)	-	0	N/A
16.2(Leakage Current (after Clause 15))	-	1500	N/A
17(Over Load Protection of Transformers and associated circuits)	-	1500	N/A
19(Abnormal Operation)	-	3000	N/A
20(Stability test)	-	1000	N/A
21(Mechanical Strength Test)	-	1500	N/A
22(Construction verification related test)	-	1500	N/A
23(General)	-	1500	N/A
25(Supply connection and external flexible cords)	-	1500	N/A
26(Terminals for external conductors)	-	1500	N/A
27(Provision for earthing)	-	1500	N/A
28(Screw test and connections)	-	1500	N/A
29(clearance, creepage distances and solid insulation)	-	1500	N/A
30.1(Ball pressure test)	-	1000	N/A
30.2(Glow Wire Test)	-	1000	N/A
30.2(Needle Flame Test)	-	1000	N/A
16.3(Electric Strength (after clause 15 and 16.2))	-	1500	N/A
15.2(Spillage Test)	-	1500	N/A

31 Dec, 2026

-
Included w.e.f. 28 June 2018. Excluding: EMI/EMC (Cl.19.11.4.2), Component (Cl.24) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

7731

TUV INDIA PVT LTD, PUNE

7139026

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

60000 View breakup
Rs. 1,10,000/- for Electronic Games (Video), Optical disc Players with built in amplifier of input power 200W and above, Amplifier of input power 2000W and above, Electronic musical system with input power 200W and above, Power adaptors for audio, Video and similar electronic apparatus, Plasma/ LED/LCD television screen upto 32 inch, Plasma/ LED/LCD television screen above 32 inch and upto 70 inch.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	N/A
7(Heating under normal operating conditions)	-	7000	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	3000	N/A
9(Electric shock hazard under normal operating conditions)	-	3000	N/A
10(Insulation requirements)	-	15000	N/A
11(Fault conditions)	-	4000	N/A
12(Mechanical strength)	-	3000	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	N/A
15(TERMINALS)	-	4000	N/A
16(External flexible cords)	-	3000	N/A
17(Electrical connections and mechanical fixings)	-	3000	N/A
19(Stability and mechanical hazards)	-	3000	N/A
20(Resistance to fire)	-	3000	N/A

31 Dec, 2026

-
Revised Version Included w.e.f. 28 June 2018 : Excluding: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Printed Boards (Cl.13.5), Component test (Cl.14), External flexible cord (Cl.16.1 & Cl.16.3), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18) and Sub- contracting of Vibration test (Cl.12.1.3) to M/s Reliable Analytical Laboratories Pvt. Ltd., Thane.

7732

TUV INDIA PVT LTD, PUNE

7139026

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
Rs. 80,000/- for Laptop/Notebook/ Tablets; Rs. 1,00,000/- for Visual Display Units/Video Monitors upto 32 inch; Rs. 1,10,000/- for Visual Display Units/Video Monitors above 32 inch and upto 70 inch; Rs. 85,000/- for Printers/Plotters for A4 and Legal size paper; Rs. 95,000/- for Printers/Plotters for A3 and above size paper; Rs. 80,000/- for Scanners (Battery Operated); Rs. 98,000/- for Scanners (Mains Operated); Rs. 50,000/- for Wireless Keyboard; Rs. 80,000/- for Telephone Answering Machine; Rs. 85,000/- for Set Top Box; Rs. 1,10,000/- for Automatic Data Processing Machine; Rs. 1,00,000/- for Copying Machine/ Duplicators for A4 and Legal size paper; Rs. 1,05,000/- for Copying Machine/ Duplicators for A3 and above size paper ; Rs. 78,000/- for Mail Processing Machine/Postage Machine/Franking Machines; Rs. 75,000/- for Power Adapters for IT Equipments, Mobile Phones, Cash Registers, Point of Sale machine, Smart Card Readers, Passport Readers. The following products included in the existing scope w.e.f. 28 June 2018 : Rs. 1,108000/- for CCTV Cameras/CCTV Recorders, USB Driven Barcode Readers, Barcode Scanners, Iris Scanners, Optical Fingerprint Scanners, Smart Watches.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	2000	N/A
1.7(Markings and instructions)	-	1000	N/A
2.1(Protection from electric shock and energy hazards)	-	1500	N/A
2.2(SELV circuits)	-	1500	N/A
2.3(TNV circuits)	-	1500	N/A
2.4(Limited current circuits)	-	1500	N/A
2.5(Limited power sources .)	-	1500	N/A
2.6(Provisions for earthing and bonding)	-	1500	N/A
2.7(Overcurrent and earth fault protection in primary circuits)	-	1500	N/A
2.8(Safety interlocks)	-	2000	N/A
2.9(Electrical insulation)	-	36000	300/ Hour
2.10(Clearances, creepage distances and distances through insulation)	-	1500	N/A
3.1(General)	-	1000	N/A
3.2(Connection to a mains supply)	-	1500	N/A
3.3(Wiring terminals for connection of external conductors)	-	2000	N/A
4.1(Stability)	-	1500	N/A
4.2(Mechanical strength)	-	1500	N/A
4.3(Design and construction)	-	1500	N/A
4.4(Protection against hazardous moving parts)	-	1500	N/A
4.5(Thermal requirements)	-	4000	N/A
4.6(Openings in enclosures)	-	1500	N/A
4.7(Resistance to fire)	-	1500	N/A
5.1(Touch current and protective conductor curren)	-	1500	N/A
5.2(Electric strength)	-	1500	N/A
5.3(Abnormal operating and fault conditions)	-	4000	N/A
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1500	N/A
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1500	N/A
6.3(Protection of the telecommunication wiring system from overheating)	-	1500	N/A
7.1(General)	-	1500	N/A
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1500	N/A
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1500	N/A
7.4(Insulation between primary circuits and cable distribution systems)	-	1500	N/A

31 Dec, 2026

-
Excluding following tests: Components (Cl. 1.5), Tests on coated printed boards and coated components (Cl. 2.10.8), Power Supply Cords (Cl. 3.2.5.1), Cathode Ray Tubes (Cl. 4.2.8), High Pressure Lamps (Cl. 4.2.9), Batteries (Cl. 4.3.8), Oil and grease(Cl. 4.3.9), Dust Powders, liquids and gases (Cl. 4.3.10), Flammable liquids (Cl. 4.3.12), Ionizing radiation (Cl.4.3.13.2) Effect of UV radiation on materials (Cl. 4.3.13.3/ Annex Y) Human exposure to UV radiation (Cl.4.3.13.4) Laser including LED (Cl.4.3.13.5), Bottom of the fire enclosure/ Hot flaming oil test (Cl.4.6.2 & Annex-A3), Evaluation of Integrated Circuit (IC) Current Limiters (Annex CC).

7733

TUV INDIA PVT LTD, PUNE

7139026

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	1500	N/A
4.7(Marking & instructions)	-	1500	N/A
5.1(Protection against shock and energy hazards)	-	1500	N/A
5.2(Requirement of auxiliary circuits)	-	1500	N/A
5.3(Protective earthing and bonding)	-	1500	N/A
5.4(AC and DC power isolation)	-	1500	N/A
5.5(Over current and earth fault condition)	-	1500	N/A
5.6(Safety interlocks)	-	5000	N/A
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1500	N/A
6.1(Wiring, connections and supply)	-	1500	N/A
6.2(Connection to power)	-	1500	N/A
6.3(Wiring terminals for external power conductors)	-	1500	N/A
7.1(Enclosure)	-	1500	N/A
7.2(STABILITY)	-	1500	N/A
7.3(MECHANICAL STRENGTH)	-	1500	N/A
7.4(Construction details)	-	1500	N/A
7.5(Resistance to fire)	-	1500	N/A
7.7(Temperature rise)	-	7000	N/A
8.1(General procision for earth leakage)	-	1500	N/A
8.2(Electric Strength)	-	1500	N/A
8.3(Abnormal operating and fault conditions)	-	7000	N/A
9.0(Connection to telecommunication networks)	-	1500	N/A
7.6(Battery location)	-	1500	NA

31 Dec, 2026

-
Excluding testing of Components (Clause 1.5)

7734

TUV INDIA PVT LTD, PUNE

7139026

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	N/A
9(Terminals)	-	3000	N/A
10(PROVISION FOR EARTHING)	-	1500	N/A
11(MOISTURE RESISTANCE)	-	20000	N/A
12(Electric Strength)	-	1500	N/A
13(Thermal endurance test for winding of ballasts)	-	5000	N/A
14(Fault conditions)	-	5000	N/A
15(Transformer heating)	-	5000	N/A
16(Construction)	-	2000	N/A
17(Creepage distance and clearances)	-	3000	N/A
18(Screws, current carrying parts and connections)	-	2000	N/A
19(Resistance to heat, fire and tracking)	-	3000	N/A
20(Resistance to corrosion)	-	2000	N/A
8(Protection against accidental contact with live parts)	-	2000	N/A

31 Dec, 2026

-
-

7735

Global Testing Laboratory Private limited, Ghaziabad

8184306

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	1000	-
7.3(Tolerance on thickness of insulation )	-	1000	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1000	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	1000	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1000	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1000	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	2000	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	2000	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional))	-	1000	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1000	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1000	-
10.1 d) iii)(Carbon Black Content)	-	2000	-

11 Mar, 2028

-
-

7736

Standard Testing and Compliance Private Limited

6178726

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

rope lights

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	15% discount to BIS
21.5(Classification of Luminaires')	-	0	15% discount to BIS
21.6(Marking)	-	2000	15% discount to BIS
21.7(Construction)	-	5000	15% discount to BIS
21.8(Creepage Distance and Clearances)	-	2000	15% discount to BIS
21.10(Terminals)	-	1000	15% discount to BIS
21.11(External & Internal Wiring)	-	2000	15% discount to BIS
21.12(Protection against electric shock)	-	3000	15% discount to BIS
21.13(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
21.14(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
21.15(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
21.16(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
21.7.1(General)	-	0	15% discount to BIS
21.7.3(Terminals and supply connections)	-	0	15% discount to BIS
21.7.4(Control units)	-	0	15% discount to BIS
21.7.5(Mechanical strength)	-	0	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

7737

Standard Testing and Compliance Private Limited

6178726

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

lighting chains

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	15% discount to BIS
20.5(Classification of Luminaires')	-	0	15% discount to BIS
20.6(Marking)	-	2000	15% discount to BIS
20.7(Construction)	-	5000	15% discount to BIS
20.8(Creepage Distance and Clearances)	-	2000	15% discount to BIS
20.10(Terminals)	-	1000	15% discount to BIS
20.11(External & Internal Wiring)	-	2000	15% discount to BIS
20.12(Protection against electric shock)	-	3000	15% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
20.14(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

7738

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

51000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	-
5(Construction)	-	5000	-
6.3(Cooling Capacity Test)	-	8000	-
6.4(Maximum Operating Condition Test)	-	5000	-
6.5(Pull Down Test)	-	5000	-
9(Maximum Power Consumption Test)	-	5000	-
10(Annual Energy Consumption Test)	-	8000	-
11(Storage Capacity Test)	-	5000	-
13(Functional Test)	-	2000	-
14 a)(Protection against electric shock)	-	2000	-
14 b)(High voltage (electric strength) test)	-	2000	-
14 c)(Leakage current tests)	-	2000	-
14 d)(Provision for earthing)	-	2000	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-
4(Classification)	-	0	-
5(Construction)	-	0	-
6.3(Cooling Capacity Test)	-	0	-
6.4(Maximum Operating Condition Test)	-	0	-
6.5(Pull Down Test)	-	0	-
9(Maximum Power Consumption Test)	-	0	-
10(Annual Energy Consumption Test)	-	0	-
11(Storage Capacity Test)	-	0	-
13(Functional Test)	-	0	-
14 a)(Protection against electric shock)	-	0	-
14 b)(High voltage (electric strength) test)	-	0	-
14 c)(Leakage current tests)	-	0	-
14 d)(Provision for earthing)	-	0	-

20 Jun, 2028

-
Included w.e.f 27.03.2025

7739

Standard Testing and Compliance Private Limited

6178726

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

Flood Light

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	15% discount to BIS
5(Classification of Luminaires')	-	0	15% discount to BIS
6.0(Marking)	-	2000	15% discount to BIS
7.0(Construction)	-	5000	15% discount to BIS
8.0(Creepage Distance and Clearances)	-	1000	15% discount to BIS
9.0(Provision for earthing)	-	1000	15% discount to BIS
10.0(Terminals)	-	1000	15% discount to BIS
11.0(External & Internal Wiring)	-	2000	15% discount to BIS
12.0(Protection against electric shock)	-	3000	15% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	12000	15% discount to BIS
14.0(Resistance to Dust & Moisture)	-	5000	15% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	3000	15% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	15% discount to BIS
17.0(Photometric Test)	-	15000	15% discount to BIS

10 Jul, 2027

-
Included.w.e.f.06.12.2024

7740

MSME TESTING CENTRE, CHENNAI

6106704

IS 9537 : Part 8 (2003)

Conduits for electrical installations - Specification: Part 8 rigid non - Threadable conduits of aluminium alloy

Aluminum Alloy Conduit

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(type test)	-	0	Testing charges applicable per sample per size.
4.2(ambient temperature)	-	0	Testing charges applicable per sample per size.
4.5(for rigid conduits, lengths)	-	0	Testing charges applicable per sample per size.
4.5(for pliable and flexible conduit coils)	-	0	Testing charges applicable per sample per size.
7(DIMENSIONS)	-	4000	Testing charges applicable per sample per size.
8(CONSTRUCTION)	-	1000	Testing charges applicable per sample per size.
9.2(Bending Test)	-	1000	Testing charges applicable per sample per size.
9.3(Compression Test)	-	1000	Testing charges applicable per sample per size.
clause No. 9.1(replacement)	-	1000	Testing charges applicable per sample per size.
clause No. 12(ELECTRICAL CHARACTERISTICS)	-	1000	Testing charges applicable per sample per size.

31 Dec, 2026

-
Included w.e.f. 02.04.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number